CNMM 120404 T9225 Wendeplatten - Tungaloy
Combining the toughness of the T9225 CVD-coated carbide grade with the ISO CNMM120404 form and an edge radius of 0.4 mm delivers reliable chip control and extended tool life for medium-to-heavy steel turning; order directly via Metav Werkzeuge or consult their specialists for holder compatibility and grade selection. CNMM 120404 T9225 Turning Insert — Tungaloy A CNMM120404 T9225 indexable insert engineered for external and internal turning, offering robust chip control and consistent performance in variable steel cutting conditions CVD-coated universal grade T9225 Robust chip control, single-sided breaker ISO CNMM120404 rhomboid geometry Edge radius 0.4 mm for heavy cuts Consistent cutting performance for demanding steel operations The combination of CVD-coated carbide and the T9225 grade provides a balance of wear resistance and toughness that is especially suitable for medium-to-heavy steel machining. The ISO designation ensures standardised geometry, so the insert can be integrated into established tool systems without uncertainty. Because the grade is designed for variable engagement and light interruptions, process stability is promoted and tool life is extended under fluctuating cutting conditions. Technical parameters such as the rhomboid form and the 80° cutting angle contribute to a predictable contact area, which reduces the frequency of unexpected tool changes and stabilises cycle times. Predictable chip control and straightforward holder matching A single-sided chipbreaker and the rhomboid form guide chips reliably away from the cut, reducing chatter and easing chip evacuation in both external and internal turning operations. The insert is supplied with a cylindrical hole and a 0° relief angle, so compatibility with a suitable clamping set and external holders is defined by form, clearance angle, tolerance class, fastening method, size and thickness. For retrofit or setup considerations, the inscribed circle (size 12) and plate thickness (4.76 mm) are the decisive measurements to match with standard holders and boring bars. Further compatibility checks can be provided by Metav Werkzeuge to ensure correct clamping and optimal cutting parameters. Robust design for production environments and lower downtime The edge radius 0.4 mm and reinforced plate thickness offer increased resistance to mechanical shock and interrupted cuts, resulting in a reduced risk of edge chipping in heavy feed scenarios. Secure fastening via the central hole and the standardised ISO geometry ensure repeatable seating and orientation, which supports quick indexation and minimal setup variance between inserts. These attributes translate into longer intervals between changes, predictable surface finish quality and improved machine uptime — advantages that contribute directly to manufacturing efficiency and confidence on the shop floor. For robust and versatile steel turning, request Tungaloy CNMM120404 T9225 inserts via Metav Werkzeuge and consult their specialists for holder compatibility and recommended cutting data Technical data Article number: 6780864 Manufacturer SKU: TUN6780864 SKU: 6780864-Tungaloy Model series: ISO indexable turning inserts Material: carbide Facts Cutting edge angle: 80° Relief angle: 0° Size (inscribed circle): 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Special features Grade: T9225 (CVD-coated carbide) Single-sided chipbreaker Rhomboid plate form With cylindrical hole ISO designation CNMM120404 Application: turning Compatible with external holders, boring bars, clamping sets and replacement screws FAQ Which materials is this insert best suited for? The CNMM120404 T9225 insert from Tungaloy is formulated as a robust universal grade for medium-to-heavy steel machining and performs well where interrupted cuts or variable engagement demand added toughness. How does the chipbreaker affect process reliability? The single-sided chipbreaker on the CNMM120404 geometry controls chip flow and reduces the risk of entanglement, which improves chip control and contributes to steadier cutting forces and surface finish. What dimensions are critical when selecting a compatible holder? Key data to match are the inscribed circle (12 mm), plate thickness (4.76 mm), rhomboid form and the presence of a cylindrical hole; these determine mechanical fit and clamping method for the chosen holder. Is this insert suitable for interrupted cuts or mixed cutting conditions? Yes; the T9225 CVD-coated carbide grade offers increased toughness for interrupted cuts and variable engagement, helping to avoid premature edge failure under unstable conditions. Can this insert be used for internal turning as well as external turning? The insert is specified for both external and internal turning, provided a suitable holder or boring bar is used that matches the plate geometry and clamping requirements. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120408 T9215 Wendeplatten - Tungaloy
Benefit from the combination of Tungaloy's CVD-coated carbide T9215 and the ISO rhombic CNMM120408 geometry for efficient medium‑steel turning; the 0.8 mm corner radius and single‑sided chipbreaker support stable chip control and high productivity. Order directly via Metav Werkzeuge or request application advice from our consultants. CNMM120408 T9215 Turning Insert — Tungaloy, CVD‑coated carbide for turning A CNMM120408 T9215 turning insert designed for ISO‑standard external and internal turning, offering robust wear resistance and reliable performance in continuous to lightly interrupted cuts. ISO rhombic CNMM insert 80° cutting geometry CVD-coated carbide grade T9215 for steel 0.8 mm corner radius for reliable edge strength Single-sided chipbreaker, cylindrical hole for secure clamping Consistent productivity for medium‑steel turning The CVD‑coated T9215 grade is formulated for medium steel machining, combining wear resistance with fracture toughness to maintain cutting edge integrity under sustained loads. The insert’s 80° rhombic geometry converts to a stable cutting attitude that supports longer tool life and consistent surface finish. For production environments where throughput and repeatability matter, this combination reduces the frequency of index changes and helps to maintain cycle‑time targets without compromising component quality. Predictable chip control and secure clamping A single‑sided chipbreaker on the insert guides chip formation in typical turning operations, reducing entanglement and easing swarf removal in automated setups. The cylindrical hole provides positive location and clamping when used with compatible ISO holders, so mechanical stability is improved even on interrupted cuts. Explaining terms: a chipbreaker is a groove or profile that encourages short, controllable chips rather than long swarf, which in turn lowers the risk of workpiece damage and machine downtime. Practical geometry and edge preparation for everyday use The 0.8 mm corner radius balances edge strength with the ability to achieve fine surface finishes on turned components. A modest corner radius absorbs impact and reduces chipping on heavy cuts, while still allowing acceptable dimensional control on finishing passes. The insert thickness of 4.76 mm and rhombic plate form provide a compact, versatile solution for a wide range of external and internal turning tasks, simplifying tool inventory and holder compatibility checks. Compatibility and system considerations for workshops This ISO‑normed insert forms part of a system: the right holder, clamping components and replacement screws are required for safe and efficient use. Compatibility depends on insert form, clearance angle, tolerance class, fastening method, size and thickness; confirming these parameters ensures optimum clamping and heat dissipation. For manufacturing planners and toolroom engineers, standardised inserts such as this one enable predictable tool change routines and reduce the need for bespoke tooling solutions. For precise medium‑steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for tailored application advice and immediate availability. Technical Data Article number: 6773884 SKU: 6773884-Tungaloy Manufacturer SKU: TUN6773884 Name: CNMM120408 T9215 Tungaloy‑Wendeplatte Facts Corner radius: 0.8 mm Cutting angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Special features Coating: CVD Material: carbide Chipbreaker: single‑sided Hole: cylindrical, with hole Plate form: rhombic Typical application: external and internal turning Model series: ISO turning indexable inserts FAQ Is this insert suitable for medium‑hard steels? Yes. The CNMM120408 T9215 insert from Tungaloy is specified for medium‑steel machining and combines wear resistance with fracture toughness to support productive turning. How does the chipbreaker affect machining performance? The single‑sided chipbreaker on this insert promotes short, controlled chips, improving swarf management and reducing the risk of chip‑related interruptions during turning operations. What does the 0.8 mm corner radius mean for finish and tool life? A 0.8 mm corner radius increases edge strength and resistance to chipping on roughing cuts while still permitting good surface finish on finishing passes when feed and speed are adjusted appropriately. Can this insert be used in interrupted cutting? Yes. The T9215 grade and the insert geometry are suitable for continuous to light interrupted cuts; however, clamping rigidity and holder choice must match the application for best results. Does the cylindrical hole influence clamping options? The cylindrical hole provides a standardised reference for secure clamping with compatible ISO holders, improving repeatability and mechanical stability during machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 120408 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance, a rhombic CNMM geometry offering stable engagement, and a robust 0.8 mm corner radius for reliable, productive turning — order the insert conveniently via Metav Werkzeuge or consult our specialists for application support. CNMM_120408 T9215 — Turning insert CNMM120408 by Tungaloy, rhombic 80° CNMM_120408 T9215 is an ISO‑standard indexable turning insert designed for general external and internal turning applications in medium steels. Its geometry and grade favour productive, repeatable machining. CVD-coated carbide grade T9215 Rhombic CNMM shape, 80° cutting angle 0.8 mm corner radius for robust cuts Single-sided chipbreaker with cylindrical hole High productivity through optimised grade and coating The combination of a CVD-coated carbide substrate and the T9215 grade provides a balance of wear resistance and fracture resistance that suits medium‑strength steels. This insert is engineered for continuous to slightly interrupted cuts, enabling stable, high‑throughput machining while reducing the need for frequent index changes. The coating improves surface durability under sustained contact, which leads to longer tool life and fewer process interruptions — a direct contribution to cost‑effective production. Stable cutting engagement from geometry and dimensions The rhombic CNMM geometry with its 80° included angle and 0° relief angle offers a neutral, secure seating in compatible holders, supporting consistent chip formation and reliable cutting forces. The 0.8 mm corner radius increases edge strength for tougher engagement, and the 4.76 mm plate thickness contributes to overall rigidity. Combined with the single‑sided chipbreaker and the cylindrical locating hole, the insert achieves dependable clamping and controlled chip flow, which benefits surface finish and repeatability in serial production. ISO compatibility and flexible process integration As an ISO‑standard turning insert, the designation CNMM120408 simplifies selection and inventory management across tool families and holders. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness — all standardised parameters that aid rapid tool changeover. Select the appropriate chipbreaker and insert grade according to workpiece material and machining stability to unlock optimal cutting conditions; the insert is particularly suited to medium steel applications where a balance of productivity and tool life is required. Practical benefits for workshops and production lines Using a standardised, robust insert reduces setup complexity and enhances process reliability. The product’s design focusses on minimising downtime and ensuring consistent results across long runs. The neutral geometry and proven coating technology provide confidence in repeatable component quality, while the sturdy corner radius and thickness reduce edge chipping during transient loads — practical advantages for both jobbing shops and volume production. For application advice, compatibility checks or supply of Tungaloy CNMM120408 T9215 inserts, contact Metav Werkzeuge — our technical team is available to assist with selection and procurement. Technical Data Article number: 6774090 Manufacturer SKU: TUN6774090 SKU: 6774090-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: CNMM120408 T9215 Tungaloy Facts Insert designation: CNMM120408 ISO code: 120408 Thickness: 4.76 mm Size: 12 Corner radius: 0.8 mm Relief angle: 0° Included angle: 80° Special features Material: carbide Coating/grade: CVD‑coated, T9215 Chipbreaker: single‑sided Hole: with cylindrical hole Shape: rhombic Application: turning (external and internal) System: ISO indexable insert, suitable for ISO holders and clamping sets FAQ Is this insert suitable for medium steel machining? Yes. The CNMM120408 T9215 insert from Tungaloy is specifically selected for medium steel applications, combining the CVD coating and grade T9215 to deliver wear and fracture resistance for continuous to slightly interrupted cuts. Which holder features are required for correct compatibility? Compatibility depends on matching the insert form, relief angle, tolerance class, fastening method, size and thickness; the CNMM120408 form requires an ISO‑compatible holder designed for rhombic CNMM inserts and secure clamping with a cylindrical hole. How does the T9215 grade affect tool life? The T9215 CVD‑coated carbide provides improved wear resistance while maintaining fracture resistance, which extends effective tool life under typical turning loads and reduces the frequency of index changes. Can this insert manage interrupted cuts? The insert is designed for continuous to slightly interrupted cuts; for heavier interruptions, choose tooling and parameters that account for increased impact and consider different grades or geometry as needed. What chip control can be expected with this insert? With its single‑sided chipbreaker and rhombic geometry, the insert offers controlled chip formation for common turning operations; selection of the specific chipbreaker style should match the workpiece material and machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120408 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide, ISO-standard compatibility, and a 0.8 mm corner radius for consistent medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for application advice. CNMM 120408 T9225 — ISO turning insert for turning, Tungaloy A CNMM 120408 T9225 insert designed for turning operations, offering a robust universal grade for medium-to-heavy steel machining with dependable edge life and secure clamping. ISO-standard rhombic insert, with cylindrical hole CVD-coated carbide grade T9225 for steel machining 0.8 mm corner radius for reduced edge stress Single-sided chipbreaker for predictable chip flow Optimised cutting for medium-to-heavy steel turning The insert delivers consistent cutting performance in demanding conditions thanks to its CVD-coated carbide composition and the T9225 grade, a robust universal formulation. These properties increase resistance to wear and tolerate slightly interrupted cuts, which means fewer tool changes and improved uptime. The design is particularly suited to turning applications where both stability and adaptability are required, translating directly into more reliable cycle times and predictable component quality. Secure fit and compatibility with ISO holders Specified as an ISO-standard rhombic insert with a cylindrical hole, this component fits a wide range of external holders when shape, clearance angle, tolerance class, fastening, size and thickness are matched. The 80° geometry and 4.76 mm thickness provide stable seating and torque transmission, reducing the risk of micro-movement during heavy cuts. Clear, standardised dimensions simplify tooling planning and reduce setup time on the shop floor, supporting reproducible processes. Controlled chip formation and edge stability Equipped with a single-sided chipbreaker and a 0.8 mm corner radius, the design promotes predictable chip control while lowering edge stresses during interrupted cuts. This restraint on chip behaviour enhances surface finish and reduces the likelihood of built-up edge formation in continuous steel turning. The combination of groove geometry and the robust universal grade helps maintain a reliable cutting edge across variable workpiece conditions, which is a clear advantage for batch work and mixed-series production. Practical benefits for process reliability The insert’s configuration supports straightforward inventory management and tool selection: the standardised form and reliable wear characteristics make the component easy to specify across different machines and setups. By favouring such standardised inserts, toolrooms benefit from streamlined stocking, reduced planning complexity and a higher degree of process security. Over time, fewer unplanned stoppages and consistent tool life contribute to lower total cost of ownership and improved delivery reliability. Contact Metav Werkzeuge for application recommendations on Tungaloy inserts or to request tailored machining parameters — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780953 Manufacturer SKU: TUN6780953 Brand SKU: 6780953-Tungaloy Model series: ISO turning inserts Facts Radius: 0.8 mm Thickness: 4.76 mm Size: 12 mm Clearance angle: 0° Lead/angle: 80° Special features CVD-coated carbide Grade: T9225 Shape: rhombic Hole: with cylindrical hole Chipbreaker: single-sided Application: turning FAQ What materials is this insert best suited for? The CNMM 120408 T9225 insert is optimised for steel machining; the T9225 grade and CVD-coated carbide construction provide robustness for medium-to-heavy steel turning operations. Is the insert compatible with standard ISO holders? Yes, the ISO-standard CNMM 120408 fits ISO holders when form, clearance angle, tolerance class, fastening, size and thickness are matched for correct seating. How does the 0.8 mm corner radius affect machining results? A 0.8 mm corner radius reduces edge stress and improves resistance to chipping in interrupted cuts, offering better edge stability and a more consistent surface finish. Does the insert include a chipbreaker, and what is its effect? The insert features a single-sided chipbreaker, designed to promote predictable chip flow and reduce the likelihood of tangled chips during turning, especially in steel. What is the significance of the T9225 grade? The T9225 grade is a robust universal formulation that balances toughness and wear resistance, suitable when variable engagement conditions require higher ductility and edge security. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120408 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T9225 and the ISO CNMM120408 geometry for consistent, productive medium-to-heavy turning. The combination of robust grade, a 0.8 mm corner radius, and a rhombic form ensures reliable chip control and repeatable tool life. Order the insert directly via Metav Werkzeuge or ask the consultants for application-specific advice. CNMM 120408 T9225 – turning insert by Tungaloy, rhombic, 0.8 mm radius The CNMM120408 T9225 is an ISO-standard indexable turning insert designed for medium-to-heavy steel turning, featuring a rhombic geometry and a one-sided chipbreaker for stable cutting under variable conditions. ISO CNMM geometry, rhombic form CVD-coated carbide T9225 grade 0.8 mm corner radius for robust edges Cylindrical hole; compatible with ISO holders Consistent productivity through a robust carbide grade The ISO-design insert combines a CVD-coated carbide substrate with the T9225 universal grade to deliver balanced toughness and wear resistance for demanding turning tasks. This composition is aimed at applications where interrupted cuts or changing engagement require extra toughness rather than the finest finishing grade. The result is fewer edge failures and longer intervals between index changes, which translates into improved uptime and a more predictable production rhythm. The specification supports medium-to-heavy machining of steel, where sustained cutting forces and chip control are critical. Geometry and clamping ensure precise, repeatable performance The rhombic plate form with its 0.8 mm corner radius and 0° clearance is engineered for versatility on external and internal turning operations. The insert's compatibility with ISO-standard holders is defined by its shape, free clearance, tolerance class and thickness (4.76 mm), so correct seating and clamping achieve repeatable positioning and stable cutting. The presence of a cylindrical hole facilitates secure fastening and easy replacement of spare screws and shims, reducing setup time and minimising the risk of misalignment during tool changes. Practical guidance for application and material selection Select the one-sided chipbreaker and grade combination for steels where moderate to heavy cuts are common and chip control must be reliable. The insert is intended primarily for turning operations on steel; its balanced CVD coating supports good flank and crater wear resistance under typical machining temperatures. For best results, match the insert form and T9225 grade to holder rigidity and cutting data: a stable set-up and appropriate feed rates extend tool life and enhance surface quality. Where surface finish and dimensional tolerance are decisive, adjust cutting parameters rather than shifting to a more brittle grade. Contact Metav Werkzeuge for tailored recommendations on tooling set-ups and to order the Tungaloy CNMM120408 T9225 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781235 Manufacturer article number: TUN6781235 Label: CNMM120408 T9225 Tungaloy-Wendeplatte Manufacturer: Tungaloy ISO designation: CNMM120408 Grade: T9225 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 4.76 mm Clearance angle: 0° Included hole: with hole (cylindrical) Included angle: 80° Special features Material: carbide Coating: CVD-coated Chipbreaker: one-sided Plate form: rhombic Typical application: turning (external and internal) Compatibility: ISO holders, shims and fastening screws FAQ What materials is this insert suitable for? The CNMM120408 T9225 insert is optimised for steel turning; the CVD-coated carbide and T9225 grade provide toughness and wear resistance appropriate for medium-to-heavy steel machining. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius increases edge strength and impact resistance during interrupted cuts, improving edge life for the CNMM120408 insert without compromising general versatility. Is the insert compatible with standard ISO holders? Yes, the rhombic form and ISO CNMM geometry ensure compatibility with ISO-standard external and internal turning holders when matching thickness and tolerance class. What benefits does the T9225 grade deliver compared with finishing grades? T9225 is a robust universal grade designed for changing engagement and higher toughness demands; it favours tool life and process stability over the very fine edge required for mirror finishes. Does the cylindrical hole influence clamping reliability? The cylindrical hole provides stable, repeatable clamping when used with appropriate screws and shims, reducing runout and ensuring consistent positioning for the insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120408 T9235 Wendeplatten - Tungaloy
Optimise turning processes with a CVD‑coated carbide grade tailored for interrupted cuts and unstable conditions; combine grade toughness and ISO compatibility for consistent tool life and repeatable results. Order the insert directly via Metav Werkzeuge or consult our specialists for grade and holder selection. CNMM 120408 T9235 — Indexable turning insert (turning) by Tungaloy CNMM120408 T9235 is an ISO‑standard indexable insert for general turning applications, engineered for reliable performance in interrupted cuts and lower cutting speeds ISO‑standard CNMM geometry, rhombic form CVD‑coated carbide T9235 for steel 0.8 mm corner radius for sturdy edges Cylindrical hole for secure mounting Consistent performance in unstable cutting conditions The insert is manufactured in the T9235 grade, a CVD‑coated carbide formulation designed to tolerate lower speeds and interrupted cuts while maintaining edge integrity. The tougher substrate and coating combination reduces chipping risk under unstable conditions, which results in fewer unexpected tool changes and more predictable production cycles. For shops facing variable workpiece clamping or intermittent cut patterns, this specification offers a robust compromise between wear resistance and fracture toughness, helping to sustain machining continuity and reduce scrap rates. Secure seating and ISO compatibility for easy integration Built to the ISO specification, the rhombic geometry and cylindrical hole ensure positive locating and repeatable clamping in compatible holders. Compatibility with a toolholder depends on parameters such as form, relief angle, tolerance class, fastening and thickness; the standardised dimensions ease tool management across different machines. The 0° relief angle is suitable for neutral cutting actions where chip flow and support must be balanced. Clear identification of the insert geometry simplifies inventory control and reduces setup time when replacing inserts in multi‑operator environments. Balanced edge strength for versatile turning tasks A 0.8 mm corner radius delivers reinforced cutting edges that tolerate heavier engagement and intermittent contact, while the 4.76 mm plate thickness contributes to overall stiffness and heat absorption at the tool tip. The single‑sided chipbreaker supports consistent chip formation when machining steel varieties, enabling safer chip evacuation and reduced recutting of chips. This geometry is particularly beneficial for mixed production runs where both external and internal turning operations are required without frequent tool changes. System considerations and practical guidance The complete system comprises the ISO turning insert, the appropriate external holder or boring bar, a locating shim or clamp set, and replacement screws. Select a chipbreaker and grade combination that matches the workpiece material, machining type and fixture stability to fully exploit the insert’s capabilities. Routine inspection of the clamping torque and seating surface will preserve repeatability and prevent premature tool failure. When in doubt about holder fit or process parameters, technical consultation is advisable to align cutting data with shop conditions and to extend tool life. For application advice, grade selection or rapid supply of Tungaloy CNMM120408 T9235 inserts contact Metav Werkzeuge—technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to support selection and delivery. Technical data Article number: 6786060 Manufacturer SKU: TUN6786060 Model series: ISO turning indexable inserts Product designation: CNMM120408 T9235 Tungaloy insert Facts Insert designation: CNMM120408 Grade: T9235 Corner radius: 0.8 mm Thickness: 4.76 mm Insert size: 12 Relief angle: 0° Included angle: 80° Special features Material: carbide Coating/type: CVD‑coated carbide Plate shape: rhombic Mounting: with cylindrical hole Chipbreaker: single‑sided Typical application: turning (external and internal) FAQ What workpieces is this insert best suited for? The CNMM120408 T9235 insert is optimised for machining steel where interrupted cuts or less stable setups occur; the T9235 grade balances toughness and wear resistance for such conditions. How does the T9235 grade differ from standard grades? T9235 is a CVD‑coated carbide grade selected for increased fracture resistance at the expense of slightly lower cutting speed capability, making it advantageous for interrupted or unstable turning operations. Can this insert be used for finishing passes? Yes, with appropriate cutting data and a stable holder the insert provides acceptable surface quality; however, for high‑speed finishing a finer grade may yield better surface finish. Which holder features are required for secure mounting? Secure mounting depends on matching form, free angle, tolerance class, fastening and insert thickness; the rhombic form and cylindrical hole demand a compatible ISO‑type holder with correct shim and clamping set. Is the insert reversible or single‑sided? This is a single‑sided insert with a single effective cutting edge and a single‑sided chipbreaker; its geometry is intended for robust edge strength rather than multiple indexings. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 120412 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215, reliable ISO compatibility and a robust 80° rhombic geometry for consistent productivity in medium steel turning; order the insert directly via Metav Werkzeuge or consult the technical team for grade selection and clamping details. CNMM 120412 T9215 Turning indexable insert by Tungaloy — CVD-coated carbide, 80° rhombic A CNMM 120412 T9215 turning insert designed for general external and internal turning, optimised for medium steel machining with a balance of wear resistance and toughness CNMM 120412 ISO rhombic insert CVD-coated carbide grade T9215 80° geometry for reliable turning One-sided chipbreaker, 1.2 mm radius Consistent performance for medium steel — longer productive running time The CVD-coated carbide composition and the designated T9215 grade deliver a dependable mix of wear resistance and fracture toughness that suits continuous to lightly interrupted turning. The coating stabilises the cutting edge at elevated temperatures, reducing flank wear and extending tool life under typical shop-floor feeds and speeds. For manufacturers seeking predictable cycle times, this composition supports higher metal removal rates while preserving surface quality and dimensional repeatability. Clear ISO compatibility and clamping considerations for secure operation The ISO designation and the rhombic plate outline provide defined reference points for holder selection: form, clearance angle, tolerance class, fastening method, size and thickness determine compatibility. The 80° geometry combined with a cylindrical hole and supplied mounting clearance makes it straightforward to select a suitable external holder or boring bar, minimising vibration and ensuring repeatable clamping. Correct holder choice reduces insert overhang and improves stability, which directly benefits surface finish and insert life. Chip control and productivity benefits from a focused edge design A single-sided chipbreaker matched to the insert contour promotes controlled chip formation when machining steels, easing evacuation and lowering the risk of recutting. The 1.2 mm corner radius supports strength at the edge for a wide range of turning operations, from light finishing to more demanding roughing cuts. This targeted geometry allows shops to prioritise either surface integrity or removal rate depending on process needs, enabling efficient machining cycles and reduced downtime for tool changes. For reliable procurement and technical guidance on Tungaloy turning inserts, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 — to discuss the CNMM 120412 T9215 grade and obtain personalised recommendations for holder pairing and cutting parameters Technical Data Article number: 6772208 Facts Manufacturer SKU: TUN6772208 Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 80° Special features Designation: CNMM120412 Grade: T9215 Material: carbide Coating: CVD-coated Plate form: rhombic Hole: with hole (cylindrical) Chipbreaker: one-sided Application: turning (external and internal) Series: ISO turning indexable inserts SKU: 6772208-Tungaloy FAQ What materials is this insert best suited for? The CNMM120412 T9215 insert is optimised for medium steel machining, offering a balance of wear resistance and toughness for continuous to slightly interrupted cuts. Is the insert compatible with standard ISO holders? Yes, the ISO designation and the specified dimensions allow selection of compatible external holders or boring bars based on form, clearance angle and fastening method. How does the T9215 grade affect tool life? The T9215 CVD-coated carbide grade improves wear resistance and edge stability, which contributes to longer tool life under typical turning conditions. What does the 80° geometry provide during turning? The 80° rhombic geometry enhances versatility for general turning, combining good approach angles with secure clamping and stability for consistent surface quality. Can this insert handle interrupted cuts? The insert grade and edge design tolerate light interruptions; for heavy interruptions, evaluate clamping stiffness and consider more robust grades or modified cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120412 T9225 Wendeplatten - Tungaloy
Take advantage of a robust CVD‑coated cemented carbide grade and a secure ISO rhombic form for reliable medium to heavy steel turning; order directly via Metav Werkzeuge or consult our technical advisors for application-specific setup and holder recommendations. CNMM120412 T9225 turning insert — ISO rhombic indexable insert for turning (Tungaloy) A CNMM120412 T9225 ISO‑standard rhombic indexable insert designed for external and internal turning, optimised for medium to heavy steel machining and interrupted cuts. ISO rhombic geometry, 80° cutting angle CVD‑coated cemented carbide grade T9225 1.2 mm corner radius for enhanced strength Single‑sided chipbreaker for steel turning Reliable performance for medium to heavy steel machining The combination of a CVD coating and a cemented carbide substrate delivers a balance of wear resistance and toughness that suits heavy engagement cuts. The T9225 grade is formulated as a robust universal solution for varying cutting conditions, providing extended tool life during roughing and good resistance in slightly interrupted cuts. This results in fewer tool changes and consistent cycle times on production lines. Secure fit and ISO compatibility reduce setup risk Manufactured to ISO dimensions, the insert ensures predictable fitting in compatible holders; compatibility depends on form, relief angle, tolerance class, clamping method, size and thickness. The 80° geometry and 0° relief contribute to stable seat load and repeatable positioning in external holders and boring bars, while the cylindrical hole supports positive clamping. Clear specification of these parameters simplifies holder selection and assembly checks. Improved chip control and edge security for stable turning A single‑sided chipbreaker combined with a 1.2 mm corner radius promotes controlled chip formation and increased edge strength when machining steel. These features reduce vibration and the risk of edge chipping during heavier cuts, enabling reliable material removal rates with predictable surface finish. The insert’s design supports both productivity and process stability in standard lathe operations. Practical system advice for efficient use The insert forms one part of a system comprising the ISO insert, a matching external holder or boring bar, a support shim or clamp set and replacement screws. The presence of a cylindrical hole allows straightforward clamping; however, correct pairing of chipbreaker and grade with the workpiece and cutting strategy is essential. For optimised results, select chipbreaker and cutting parameters matched to the stock material and the intended cutting depth and feed. For technical advice, application recommendations or to place an order for Tungaloy inserts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the CNMM120412 T9225 and suitable holder options Technical Data Article number: 6781236 Manufacturer item number: TUN6781236 SKU: 6781236-Tungaloy Model series: ISO turning inserts Facts Corner radius: 1.2 mm Insert size: 12 mm Thickness: 4.76 mm Relief (clearance) angle: 0° Cutting/lead angle: 80° Special features Material: cemented carbide Coating/grade: CVD‑coated, T9225 Chipbreaker: single‑sided Hole style: cylindrical hole Insert shape: rhombic Application: external and internal turning; suitable for medium to heavy steel and interrupted cuts System components: ISO insert, matching holder or boring bar, shim/clamp set and screws FAQ What materials is this insert best suited for? The CNMM120412 T9225 insert is optimised for machining medium to heavy steel and performs reliably under slightly interrupted cutting conditions thanks to its CVD coating and robust grade. How does the chipbreaker affect machining? The single‑sided chipbreaker on this indexable insert promotes controlled chip formation during steel turning, improving stability and reducing the risk of edge damage under heavy cuts. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the ISO‑standard CNMM120412 fits holders designed for rhombic ISO inserts with the corresponding 12 mm size and 4.76 mm thickness. Can this insert be used for internal boring? Yes, the geometry and chip control make the insert suitable for both external and internal turning when mounted in a matching boring bar or internal holder that accepts rhombic ISO inserts. What is the advantage of the 1.2 mm corner radius? A 1.2 mm corner radius increases edge strength and resistance to chipping during heavier engagement, supporting higher material removal rates while maintaining process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120412 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, 80° rhombic geometry and a 1.2 mm corner radius for reliable medium to heavy steel turning. The ISO designation and cylindrical hole ensure straightforward compatibility with standard holders for secure clamping. Order the CNMM120412 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMM 120412 T9225 — ISO turning insert, rhombic 80° by Tungaloy The CNMM120412 T9225 is an ISO-standard turning insert designed for medium to heavy steel turning, offering robust chip control and secure mounting for stable production. CVD-coated universal carbide 80° rhombic geometry 1.2 mm rounded cutting edge Cylindrical mounting hole for stability Consistent performance for medium to heavy steel turning The combination of a CVD-coated carbide substrate and the T9225 grade provides a dependable balance of wear resistance and toughness, making this insert well suited to medium to heavy steel turning. The coating resists abrasive wear while the substrate absorbs impacts during slightly interrupted cuts, which reduces the frequency of tool changes and supports continuous production. For buyers seeking predictable tool life and fewer stoppages, the coated carbide formulation improves cutting-edge stability and contributes to lower overall process costs through extended intervals between indexings. Secure fit and geometry that simplifies setup Compatibility with holders is determined by form, relief angle, tolerance class, fastening method, size and thickness. The rhombic 80° form gives a strong cutting edge suitable for both external and internal turning, while the cylindrical hole enables precise seating and repeatable clamping. Key dimensions such as the 4.76 mm plate thickness, 12 mm inscribed circle and 0° relief angle support robust mounting in standard ISO toolholders. The 1.2 mm corner radius provides an effective compromise between edge strength and surface finish, helping to maintain dimensional accuracy on heavier cuts without sacrificing edge life. Improved productivity through targeted chip control and grade choice This insert features a single-sided chipbreaker designed for predictable chip formation when matched to appropriate cutting parameters and workpiece materials. Selecting the correct chipbreaker and the T9225 sort allows optimisation for interrupted cuts and variable engagement conditions, leading to fewer tool interventions and higher throughput. Use with a stable toolpost and appropriate feeds to exploit the insert's strength; the geometry supports stronger cutting depths while maintaining surface integrity. The result is more productive turning cycles and consistent part quality, particularly where varying cutting conditions demand a tougher, more forgiving grade. Contact Metav Werkzeuge for tailored recommendations on holder compatibility and to procure Tungaloy CNMM120412 T9225 inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780906 Manufacturer SKU: TUN6780906 Model series: ISO turning inserts Material: Carbide Facts Inscribed circle: 12 mm Plate thickness: 4.76 mm Relief angle: 0° Nominal angle: 80° Corner radius: 1.2 mm Special features CVD-coated carbide Grade: T9225 Single-sided chipbreaker Cylindrical hole for clamping Suitable for medium to heavy steel turning ISO designation: CNMM120412 FAQ What materials is this insert suitable for? The CNMM120412 T9225 insert is formulated for medium to heavy steel machining and performs well under varying engagement and slightly interrupted cutting conditions. How is the insert clamped in the holder? Clamping is achieved via the cylindrical hole and standard ISO seating; the design supports secure, repeatable fixation in compatible toolholders. What does the T9225 grade indicate? T9225 is a CVD-coated carbide grade that balances wear resistance and toughness, intended for productive steel turning where changing conditions require resilience. Can this insert be used for internal turning as well as external turning? Yes, the 80° rhombic geometry and robust design make it suitable for both external and internal turning applications when used with the appropriate holder. What chip control does the insert offer? The insert is equipped with a single-sided chipbreaker optimised to produce controllable chips in a range of cutting scenarios when paired with suitable feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120412 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade designed for variable cutting conditions and the ISO-standard CNMM geometry to secure consistent tool life and process reliability; order via Metav Werkzeuge or request advice from our specialists for exact holder compatibility. CNMM120412 T9225 Turning Insert by Tungaloy — CVD-coated carbide, rhombic 80° A CNMM120412 T9225 indexable insert for ISO-standard turning, engineered for robust, medium-to-heavy steel machining and straightforward integration into standard holder systems CVD-coated carbide grade T9225 ISO CNMM120412 rhombic 80° geometry Robust for medium to heavy steel machining 1.2 mm corner radius, cylindrical hole Reliable cutting performance under variable conditions The T9225 composition is a CVD-coated carbide designed as a universal, robust grade for medium-to-heavy steel turning. This combination of coating and substrate increases resistance to flank wear while maintaining toughness under slightly interrupted cuts, which translates into fewer unplanned tool changes and more predictable production cycles. The coating promotes stable chip formation, reducing the risk of edge build-up and helping to preserve component surface quality throughout a production run. Geometry that reduces set-up time and improves stability The rhombic 80° geometry and the 0° clearance angle mean the insert is compatible with a wide range of ISO holders; the cylindrical hole ensures secure fastening and precise seating. A 1.2 mm corner radius balances edge strength and surface finish: larger radii increase edge durability and vibration resistance, while this radius still permits fine surface results on turned faces. Together, these geometric characteristics simplify tool selection and shorten set-up procedures in mixed production environments. System advantages for predictable shop-floor productivity As an ISO-standard indexable insert, this component forms part of a complete cutting system: insert, suitable external holder or boring bar, support shim and clamping screws. The single-sided chipbreaker matches the grade and workpiece demands to ensure controlled chip flow during both external and internal turning operations. Choosing this insert reduces tool-stock complexity and supports a cost-effective machining strategy by combining a universal cutting grade with geometry that suits many common turning tasks. For robust, versatile turning in mixed-production environments, rely on Tungaloy’s T9225-grade insert — contact Metav Werkzeuge for precise holder compatibility and ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 6780722 Manufacturer SKU: TUN6780722 SKU: 6780722-Tungaloy Manufacturer: Tungaloy Model series: ISO indexable turning inserts Designation: CNMM120412 Numbers / Core technical data Corner radius: 1.2 mm Included angle: 80° Clearance angle: 0° Plate thickness: 4.76 mm Plate size: 12 mm Designs / Special features Material: cemented carbide (CVD-coated) Grade: T9225 (robust universal grade) Plate shape: rhombic 80° Chipbreaker: one-sided Hole: with cylindrical hole Typical application: external and internal turning ISO-standard indexable insert; compatibility via form, clearance angle, tolerance class and size FAQ What materials is this insert suitable for? The CNMM120412 T9225 insert is specified for medium-to-heavy steel machining; the T9225 grade is formulated for robust performance under variable cutting conditions in steel work. How does the 1.2 mm corner radius affect results? A 1.2 mm corner radius increases edge strength and reduces vibration, which typically improves tool life and surface finish during turning with the CNMM120412 geometry. Is this insert compatible with standard ISO holders? The insert follows ISO CNMM120412 geometry; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness—verify these parameters against the holder specifications. What does the T9225 designation mean in practice? T9225 denotes a CVD-coated, robust carbide grade optimised for durable performance and stable chip formation in medium-to-heavy steel turning applications. Can this insert be used for interrupted cuts? Yes, the T9225 grade offers additional toughness for mildly interrupted cuts and changing engagement conditions, making it suitable for many real-world turning tasks. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 120412 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD coating, reliable chip control, and ISO compatibility for uninterrupted turning operations; order the CNMM120412 T9235 insert directly via Metav Werkzeuge or ask our consultants if needed. CNMM120412 T9235 indexable turning insert for Drehen by Tungaloy — CVD-coated, tough grade for unstable cuts CNMM120412 T9235 is an ISO-standard indexable insert designed for external and internal turning where interrupted cuts and unstable conditions demand a tough grade and reliable chip control ISO indexable insert CNMM120412 CVD-coated carbide T9235 One-sided chipbreaker for stable chips Rhombic shape with cylindrical hole Consistent performance in intermittent and unstable turning The CVD layer combined with carbide substrate forms a wear-resistant cutting edge that favours toughness over sheer hardness; the T9235 grade is engineered for lower cutting speeds and applications where interruptions or vibration occur. This composition reduces the risk of premature chipping and extends edge life, which translates into fewer tool changes and increased machine uptime. The technical design deliberately sacrifices top-range speed for repeatable, robust cutting performance when Stahl components and less-stable setups are present. Fast, predictable tool changes through ISO compatibility The insert follows the ISO conventions for form, clearance angle, tolerance and fastening, so compatibility with matched holders and adaptors is straight forward. The rhombic geometry and the cylindrical hole ensure secure clamping and repeatable seating; flange, spacer and screw choices determine final runout. For operations where set-up time matters, this standardisation supports rapid indexation and consistent axial and radial positioning, helping to maintain dimensional stability across batches. Improved surface finish and chip management for productive cycles A single-sided chipbreaker directs chips reliably in typical turning passes, aiding evacuation and reducing re-cutting of swarf. The effective combination of the chipformer and a 1.2 mm radius on the insert nose balances edge strength with achievable surface quality, allowing measured feeds that improve part finish without compromising edge life. In unstable cuts the chipflow remains controlled, which lowers the likelihood of built-up edge and contributes to consistently acceptable component surfaces. Practical geometry and specifications for workshop planning Key dimensions—4.76 mm thickness, 80° included angle, 0° clearance angle—support machining strategies that demand rigidity and positive seating in the toolholder. The insert’s construction suits both roughing approaches and finishing passes where stability is prioritised over maximum metal removal rates. Combining the grade’s toughness with the insert geometry offers a clear advantage when machining complex batches or mixed-production runs featuring varied clamping conditions. For tailored cutting data and holder recommendations for the Tungaloy CNMM120412 T9235 insert, contact Metav Werkzeuge’s specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to agree optimal parameters and reduce cycle time. Technical data Article number: 6786061 Manufacturer SKU: TUN6786061 Label / designation: CNMM120412 T9235 Tungaloy insert Material: carbide Data Thickness: 4.76 mm Nose radius: 1.2 mm Included angle: 80° Clearance angle: 0° Size: 12 (ISO dimension) Hole: cylindrical Special features CVD-coated grade T9235 One-sided chipbreaker Rhombic insert shape ISO-standard indexable insert Suitable for external and internal turning (Drehen) Designed for interrupted and unstable cutting conditions FAQ Is this insert suitable for both external and internal turning? Yes. The CNMM120412 T9235 indexable insert from Tungaloy is specified for external and internal turning (Drehen) and is compatible with ISO holders that match its form and size. Which materials is the T9235 grade intended for? The T9235 grade is a tough CVD-coated carbide tailored for machining Stahl at lower cutting speeds and in scenarios with interrupted cuts or unstable conditions. How does holder compatibility work for this insert? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the rhombic shape and cylindrical hole require a matching ISO-compliant holder to ensure correct seating and repeatable clamping. What chip control can be expected from this geometry? The single-sided chipbreaker is optimised for stable chip formation in turning operations, supporting reliable evacuation and reducing re-cutting of chips during discontinuous cuts. What are the key dimensions to plan for in tool setup? Important dimensions are 4.76 mm thickness, 1.2 mm nose radius, 80° included angle, and 0° clearance angle; use these values to select appropriate clamps, spacers and screws for precise mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 160612 T9215 Wendeplatten - Tungaloy
Combining CVD-coated T9215 carbide with a TRS chipbreaker, this ISO insert offers high wear resistance and reliable fracture toughness for productive medium-steel turning; its ISO rhombic geometry and cylindrical hole support straightforward integration into standard holders. Order the insert directly via Metav Werkzeuge or ask our consultants for selection advice. CNMM 160612 T9215 ISO turning insert (TRS) – Tungaloy CNMM160612-TRS T9215 Tungaloy insert designed for external and internal turning applications, providing controlled chip formation and long tool life in medium steel machining CVD-coated carbide grade T9215 for medium steel TRS chipbreaker for controlled chip formation ISO rhombic insert CNMM 160612 with 80° angle Cylindrical hole; plate thickness 6.35 mm Engineered for productive medium-steel turning The CVD-coated T9215 grade is specified for medium steel and balances wear resistance with fracture toughness, enabling sustained productivity in continuous to lightly interrupted cuts. The coated carbide substrate resists abrasive wear while the coating reduces adhesion and built-up edge, which helps to maintain cutting-edge geometry and extends service intervals. This results in fewer tool changes and higher process throughput, a clear advantage in batch and series production. Geometry that simplifies toolholder selection and process setup The rhombic ISO geometry with an effective entry angle of 80°, a corner radius of 1.2 mm and a cylindrical hole make the insert compatible with a wide range of external holders and boring bars when matched by form, clearance angle, tolerance class, fastening, size and thickness. The standardised dimensions ease replacement and spare-part management. Selecting the correct holder and clamp set ensures stable seating, repeatable positioning and consistent machining results. Improved chip control and surface results with TRS chipbreaker The integrated TRS chipbreaker is tuned for chip segmentation and evacuation during turning of steel, reducing the risk of entangling long chips and improving operator safety. Effective chip control contributes directly to superior surface finish and reduced secondary operations. For less experienced users, a chipbreaker shapes the chips predictably so that parameters such as feed and cutting speed can be optimised with lower trial-and-error effort. System perspective and recommended application strategy This insert forms part of an ISO insert system that comprises the ISO turning plate, a matching outer holder or boring bar, a shim/clamp set and replacement screws. The grade is a first choice for medium-steel operations where a combination of process reliability and productivity is required; it performs best under continuous to slightly interrupted cuts. When planning an operation, consider holder rigidity and clamping method to exploit the insert’s durability and chip-control features fully. Contact Metav Werkzeuge for tailored application support on Tungaloy inserts and to discuss holder compatibility or cutting-parameter recommendations: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Manufacturer article number: 6774091 Manufacturer SKU: TUN6774091 Dealer SKU: 6774091-Tungaloy Core characteristics ISO designation: 160612 Insert designation: CNMM160612-TRS Insert size: 16 Plate thickness: 6.35 mm Corner radius: 1.2 mm Entry angle: 80° Materials & Features Material: Carbide (Hartmetall) Coating: CVD Grade: T9215 Chipbreaker: TRS Hole: cylindrical hole Geometry: rhombic Application: Turning FAQ Which materials is this insert best suited for? The CNMM160612-TRS T9215 Tungaloy insert is optimised for medium steel machining, offering a balance of wear resistance and fracture toughness for continuous to lightly interrupted turning. What does the T9215 grade indicate? T9215 denotes a CVD-coated carbide grade engineered for high wear resistance and good toughness, making it suitable for productive steel turning applications. How does the TRS chipbreaker affect machining? The TRS chipbreaker promotes predictable chip segmentation and evacuation, improving surface finish and reducing the likelihood of chip-related interruptions when turning steel. What are the critical geometry values to consider for holder compatibility? Key values include the 80° entry angle, 1.2 mm corner radius, 16 mm insert size and 6.35 mm plate thickness; holders must match form, clearance angle and fastening features for secure installation. Is this insert suitable for heavily interrupted cuts? This grade is designed for continuous to slightly interrupted cuts; for heavy interruption or roughing, a different grade or reinforced geometry is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 160612 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, universal cutting grade combined with a secure ISO form fit to maintain production stability under varying engagement conditions; order directly via Metav Werkzeuge or consult our technical team for application advice. CNMM 160612 T9225 — Indexable turning insert (TRS chipbreaker) by Tungaloy The CNMM160612-TRS T9225 Tungaloy indexable insert for turning applications, designed for medium to heavy steel machining and interrupted cuts CVD-coated carbide grade T9225 TRS chipbreaker for medium to heavy steel 80° rhombic shape with 1.2 mm corner radius ISO compatibility with cylindrical-hole clamping Productivity and wear resistance for mixed‑load turning The CVD-coated carbide used in this insert provides a balance between hardness and toughness that suits medium to heavy steel machining. The T9225 grade is formulated for stable chip formation and reliable tool life when cutting conditions vary or when slight interruptions occur. As an indexable insert, it enables rapid index changes and predictable wear patterns, reducing machine downtime and improving throughput. The built-in benefits translate directly into higher process efficiency and fewer tool change cycles. Precision geometry and secure clamping for consistent results With an 80° rhombic geometry and a 1.2 mm corner radius, the insert offers a compromise between strength at the cutting edge and access for profiling operations. The plate thickness of 6.35 mm and size 16 provide a stiff cutting edge that resists deflection under heavier cut loads. The element is delivered with a cylindrical hole, ensuring compatibility with many ISO-compliant holders; fit depends on form, clearance angle (0°), tolerance class, fastening method, size and thickness. The TRS chipbreaker is optimised for robust chip control during turning, reducing risk of built-up edge and smoothing surface finish under variable feeds. System approach and application guidance for reliable machining The insert is intended for use in a complete system comprising an ISO indexable insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. Selecting the appropriate TRS chipbreaker and T9225 grade against the workpiece and machining strategy will deliver consistent surface quality and repeatable performance. For shops seeking predictable results in mixed-production environments, this configuration supports stable metal removal rates and extended tool life, while simplifying inventory through a universal, robust grade. For secure supply or application recommendations for Tungaloy CNMM160612-TRS inserts, contact Metav Werkzeuge — technical enquiries welcome at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781237 Manufacturer SKU: TUN6781237 SKU: 6781237-Tungaloy Facts Plate size: 16 mm Plate thickness: 6.35 mm Corner radius: 1.2 mm Insert angle: 80° Clearance angle: 0° Grade: T9225 Special features Material: Carbide (Hartmetall) Coating: CVD-coated Chipbreaker: TRS Shape: Rhombic Hole: Cylindrical hole (with hole) Application: Turning System compatibility: ISO indexable inserts FAQ What materials is this insert best suited for? The CNMM160612-TRS T9225 insert is optimised for steel machining, specifically medium to heavy steel applications where intermittent cuts or varying engagement demand extra toughness. How does the TRS chipbreaker affect machining? The TRS chipbreaker promotes stable chip formation and controlled breakage during heavier turning operations, which helps maintain surface finish and reduces the risk of built‑up edge on the Tungaloy insert. Which toolholders are compatible with this insert? Compatibility relies on ISO form, clearance angle, tolerance class, fastening and plate thickness; the CNMM160612-TRS fits standard ISO indexable holders designed for 80° rhombic inserts with a cylindrical hole. Can the insert be used for internal turning? Yes, the geometry and robust T9225 grade make the insert suitable for both external and internal turning, provided the holder and overhang are appropriate for the intended cut. What are the key dimensional features to check before fitting? Verify plate size (16 mm), plate thickness (6.35 mm), corner radius (1.2 mm), insert angle (80°) and that the holder accepts an insert with a cylindrical hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 160612 T9235 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade T9235 with a TRS chipbreaker and a 1.2 mm corner radius, this ISO CNMM160612 insert delivers dependable performance for turning steel in unstable or interrupted-cut conditions; order directly via Metav Werkzeuge or contact our consultants for selection support. CNMM 160612 T9235 Turning indexable insert by Tungaloy — CVD-coated carbide, TRS chipbreaker, 80° CNMM160612-TRS T9235 is an ISO-format indexable insert for turning, optimised for steel machining where stability is limited or cuts are interrupted CVD-coated carbide grade T9235 TRS chipbreaker for controlled chips Rhombic ISO CNMM 160612 format 1.2 mm corner radius, 80° geometry Greater reliability where conditions are variable The combination of a CVD-coated carbide substrate and the T9235 tough grade provides a balance of wear resistance and toughness that is especially useful in lower cutting speeds and unstable machining scenarios. The TRS chipbreaker improves chip control, reducing the risk of re-cutting and helping to maintain a consistent surface finish even when conditions fluctuate. For production environments with mixed workpiece stability, this configuration reduces unplanned tool changes and supports steadier cycle times. Clear guidance for fitting and compatibility Compatibility with holders is governed by seat form, relief angle, tolerance class, fastening method, size and thickness. The insert follows the ISO CNMM 160612 format and requires a matching clamping arrangement and seat geometry. Key measurable data to check before fitting are the 6.35 mm thickness, 16 mm inscribed circle, 0° relief angle and the 80° geometry; the insert is furnished with a cylindrical hole for secure fastening. Verifying these parameters prevents improper seating and helps preserve tool life and workpiece quality. How the coating and geometry translate into benefit The chemical vapour deposition (CVD) layer increases surface hardness and temperature resistance while the carbide core maintains edge strength—together they extend service life under abrasive and interrupted conditions. The 1.2 mm corner radius offers a compromise between edge strength and finish quality, supporting medium to heavy feeds without premature chipping. Selecting the appropriate chipbreaker and grade for the workpiece material and machining stability yields tangible advantages: fewer stoppages, consistent results and improved process reliability. Choose original Tungaloy CNMM160612-TRS inserts via Metav Werkzeuge for dependable performance in unstable turning operations — contact our technical team at Metav Werkzeuge for tailored holder compatibility advice and grade selection Technical data Manufacturer article number: 6786062 SKU: 6786062-Tungaloy Manufacturer SKU: TUN6786062 Designation: CNMM160612-TRS Brand: Tungaloy Material: carbide Model series: ISO indexable turning inserts Core data ISO code: 160612 Corner radius: 1.2 mm Inscribed circle / plate size: 16 mm Plate thickness: 6.35 mm Relief angle: 0° Geometry angle: 80° Special features CVD-coated carbide grade T9235 TRS chipbreaker for chip control Rhombic plate form (CNMM) With cylindrical hole for fastening Suited to external and internal turning Intended for unstable conditions and interrupted cuts Compatibility depends on holder form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The CNMM160612-TRS T9235 insert is aimed primarily at machining steel, with the T9235 grade offering toughness suited to interrupted cuts and less stable conditions. Is the insert compatible with standard ISO CNMM holders? Compatibility is achieved when the holder matches the ISO CNMM 160612 seat form and accepts the specified 6.35 mm thickness, 16 mm inscribed circle and clamping method; check the holder’s tolerance class and relief angle before fitting. How does the TRS chipbreaker affect machining? The TRS chipbreaker promotes controlled chip formation and evacuation, reducing recutting and supporting more consistent surface quality under interrupted or unstable cutting conditions. What is the benefit of the CVD coating on this insert? The chemical vapour deposition (CVD) coating increases surface hardness and thermal resistance while the carbide core preserves edge strength, extending life in abrasive conditions. Which features should be checked before ordering replacement inserts? Confirm the ISO code (160612), plate thickness (6.35 mm), inscribed circle (16 mm), relief angle (0°) and hole type (cylindrical) to ensure correct fit and performance with the existing holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 160616 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide grade T9215 and an 80° rhombic geometry for reliable productivity and stable chip formation in medium-steel turning; order the CNMM160616 T9215 insert directly via Metav Werkzeuge or consult the specialists for compatibility advice. CNMM160616 T9215 — Indexable turning insert for Turning by Tungaloy The CNMM160616 T9215 is a CVD-coated carbide indexable turning insert engineered for medium-steel turning, combining wear resistance, edge strength and a versatile 80° rhombic form for external and internal machining. CVD-coated carbide grade T9215 Rhombic 80° geometry for versatile turning 1.6 mm nose radius for robust cuts Cylindrical hole and ISO-compliant form High productivity with wear-resistant grade and consistent chip control The insert is manufactured in a CVD-coated carbide grade (T9215) that balances wear resistance with fracture toughness, making it well suited to productive, continuous to slightly interrupted turning of medium steels. This material pairing reduces flank wear and extends usable life under steady operating conditions, which translates into fewer tool changes and higher uptime for production runs. The combination of a robust substrate and the coating’s protective layer delivers consistent cutting performance and reliable chip control, particularly when paired with the correct single-sided chipbreaker. Secure clamping and wide system compatibility for quick tool changes The ISO-compliant rhombic design with an 80° included angle and a cylindrical hole ensures compatibility with a broad range of holders; fixation depends on insert form, relief angle, tolerance class, attachment method, size and thickness. The insert’s 6.35 mm thickness and standard dimensions simplify selection of a matching external holder or boring bar, plus the usual underlay/clamping sets and replacement screws complete the system. This facilitates rapid indexation and consistent seating, reducing downtime during routine tool swaps and improving process repeatability. Geometry optimised for medium-steel turning and surface finish With a 1.6 mm nose radius and a rhombic shape, the geometry provides a compromise between edge strength and achievable surface finish: the larger radius enhances edge resilience in medium-depth cuts, while the rhombic form enables access for both external and internal profiles. The single-sided chipbreaker is tuned to produce short, controllable chips when machining steels, lowering the risk of entanglement and promoting efficient evacuation. For operators with limited tooling expertise, the insert’s geometry offers predictable behaviour across a range of feed and depth settings. Practical handling, inspection and selection guidance for the workshop Integration into existing toolrooms is straightforward: the insert forms part of a complete ISO-turning system consisting of the indexable insert, a suitable external holder or boring bar, shim/clamp sets and fastening screws. Compatibility checks should consider the holder face and clamp geometry, relief angle (here 0°), tolerance class and the insert’s dimensions. Routine inspection for flank wear and chipbreaker condition supports proactive replacement before performance degrades. Select the chipbreaker and grade to match workpiece material and cut stability for the best balance of productivity and tool life. For reliable medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for expert advice and order details — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774092 Manufacturer SKU: TUN6774092 SKU: 6774092-Tungaloy Model series: ISO turning inserts Manufacturer: Tungaloy Facts Shape: Rhombic, 80° Size: 16 mm Thickness: 6.35 mm Nose radius: 1.6 mm Relief angle: 0° Hole: with hole Hole style: cylindrical Special features Grade: T9215 (CVD-coated carbide) Single-sided chipbreaker ISO-compliant insert For medium steel machining, continuous to slightly interrupted cuts FAQ What materials is this insert intended for? The CNMM160616 T9215 insert is intended primarily for medium-steel machining, where the T9215 grade offers a balance of wear resistance and fracture toughness. How is compatibility with a holder determined? Compatibility depends on insert form, relief angle, tolerance class, attachment method, size and thickness; the rhombic 80° form and cylindrical hole simplify matching to standard ISO holders. Can this insert be used for interrupted cuts? The grade and geometry suit continuous machining and slightly interrupted cuts; for heavy interruption, select a grade and geometry adapted to higher shock loads. What does the chipbreaker do and why is it important? The single-sided chipbreaker controls chip form to prevent long, stringy chips; on this insert it enhances evacuation and reduces entanglement risks during turning. Is the insert indexable and how often can it be reused? The insert is indexable according to ISO standards; reuse and number of indexes depend on wear progression and the chosen cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 160616 T9225 Wendeplatten - Tungaloy
Reliable performance from a robust CVD-coated carbide grade and ISO CNMM160616 geometry ensures stable medium-to-heavy steel turning; the 80° rhombic form with a 1.6 mm corner radius improves engagement and surface finish. Order the CNMM160616 T9225 turning insert via Metav Werkzeuge or consult our specialists for holder compatibility. CNMM 160616 T9225 – Turning insert (ISO CNMM160616) by Tungaloy, CVD-coated carbide, 80° geometry CNMM160616 T9225 is an ISO-standard, rhombic turning insert designed for external and internal turning in medium-to-heavy steel applications, offering consistent chip control and high wear resistance. CVD-coated carbide grade T9225 ISO CNMM160616 rhombic insert, 80° geometry 1.6 mm corner radius for stable engagement Cylindrical hole, 6.35 mm thickness, single-sided chipbreaker Consistent metal removal with a tough CVD-coated grade The combination of a CVD-coated surface and the T9225 grade of carbide delivers a balance of hardness and toughness appropriate for interrupted cuts and variable engagement. CVD coating provides a wear-resistant layer that reduces flank wear and increases tool life, while the substrate retains enough toughness to resist edge chipping under moderate shock. For operations where cycle time and reproducible component quality matter, this construction supports repeatable performance and lower regrind frequency. Geometry tuned for stability and surface quality An 80° rhombic geometry paired with a 1.6 mm corner radius reduces the likelihood of chatter and spreads cutting forces across a larger edge, which benefits dimensional stability and surface finish. The 0° relief angle concentrates cutting forces predictably, and the 6.35 mm plate thickness contributes to edge rigidity. The insert’s cylindrical hole and single-sided chipbreaker ensure secure clamping and directed chip formation, facilitating safer chip evacuation and fewer micro-interruptions during long cuts. ISO compatibility and straightforward tool-system integration The insert follows ISO standards for shape and dimensions, so compatibility with external holders depends on matching form, relief angle, tolerance class, fixation type, size and thickness. The typical system comprises the ISO insert, a matching external holder or boring bar, a clamp or shim kit and replacement screws. Choose the one-sided chipbreaker and the T9225 grade when machining steels that demand both toughness and abrasion resistance; select alternative chipformers if machining soft alloys or non-ferrous materials to preserve edge integrity. Productivity, process stability and predictable tool life Using a grade engineered for medium-to-heavy steel turning promotes process stability and efficient chip control, which together increase overall productivity. The insert’s wear resistance and robust edge reduce unscheduled stoppages for regrinds, while predictable performance supports consistent batch-to-batch quality. For operations prioritising throughput, this indexable geometry and coating combination provide a cost-effective approach to longer cutting intervals and reliable component tolerances. For swift compatibility checks and order placement of Tungaloy turning inserts, contact Metav Werkzeuge for expert advice and procurement at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781238 Manufacturer SKU: TUN6781238 SKU: 6781238-Tungaloy Model series: ISO-Drehwendeschneidplatten Application: Turning Product designation: CNMM160616 T9225 Tungaloy insert Facts Insert designation: CNMM160616 Corner radius: 1.6 mm Insert size: 16 mm Thickness: 6.35 mm Relief angle: 0° Geometry angle: 80° Hole: with hole (cylindrical) Special features Material: carbide Coating: CVD Grade: T9225 (universal, robust) Shape: rhombic Chipbreaker: one-sided Typical use: external and internal turning Compatibility: ISO-standard insert dimensions and mounting FAQ What materials is this insert best suited for? This insert is supplied as a T9225 CVD-coated carbide grade and is optimised for medium-to-heavy steel machining where toughness and abrasion resistance are required. Can the insert handle interrupted cuts? Yes, the T9225 grade and carbide substrate provide the toughness needed for mildly interrupted and variable engagement conditions during turning. How does the CNMM160616 geometry affect surface finish? The 80° rhombic shape combined with a 1.6 mm corner radius spreads cutting forces and reduces chatter, which typically improves surface quality and dimensional stability in turning operations. What determines compatibility with holders and boring bars? Compatibility is determined by insert form, relief angle, tolerance class, fixation type, size and thickness, so match the ISO dimensions and clamping system when selecting a holder. Is this insert supplied with fastening hardware? The system normally comprises the ISO insert, a matching holder, shim/clamp set and replacement screws; specific hardware is ordered according to the chosen holder system Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 160616 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a robust CVD‑coated carbide grade, and a geometry engineered for interrupted and unstable cuts to keep turning operations productive and predictable. Order directly via Metav Werkzeuge or consult the team for application-specific matching and holder compatibility. CNMM 160616 T9235 ISO turning indexable insert, rhombic 80° – Tungaloy The CNMM 160616 T9235 is an ISO‑standard turning insert for external and internal turning, developed for steel applications under lower cutting speeds and unstable or interrupted conditions. ISO rhombic insert, 80° geometry CVD‑coated carbide grade T9235 Single‑sided chipbreaker for interrupted cuts 6.35 mm thickness, 1.6 mm corner radius Reliable cutting in interrupted and unstable turning conditions The CNMM geometry with an 80° cutting edge and rhombic form delivers stable engagement for external and internal operations, reducing vibration in challenging set‑ups. The CVD‑coated carbide substrate (grade T9235) is a tough, wear‑resistant combination chosen specifically for steels at lower cutting speeds; this increases resistance to chipping when cuts are interrupted or when the machining environment is less rigid. The result is improved process stability and fewer unplanned tool changes, which supports continuous production and predictable cycle times. Clear compatibility and system integration for quick tool selection Compatibility with toolholders is determined by form, clearance angle, tolerance class, clamping method, size and thickness; the insert is delivered with a cylindrical hole for secure fastening. Specifying the ISO designation and dimensions simplifies the search for matching holders and clamping kits, ensuring a correct fit that maintains repeatable datum and runout control. Integrating the insert into a complete system — insert, suitable external holder or boring bar, shim/clamping set and replacement screws — ensures reliable mounting and repeatable performance across batches. Precise edge preparation and geometry for surface quality and tool life The one‑sided chipbreaker and a corner radius 1.6 mm balance edge strength and surface finish, allowing heavier interrupted cuts without premature edge failure. The 6.35 mm thickness contributes to rigidity at the cutting zone, while the 0° clearance angle suits conventional turning set‑ups and helps maintain a robust cutting edge. Together, these features reduce micro‑chipping and promote consistent surface finish on steel workpieces, lowering rework and inspection overhead. Practical benefits for workshop and production planners Selecting this insert helps reduce downtime associated with edge chipping and unplanned insert changes in unstable machining scenarios. The grade and chipformer are optimised for a broad range of steel grades and for operations where interrupted cuts are common, delivering a pragmatic mix of wear resistance and toughness. For procurement, the ISO designation and clear geometry data simplify stocking and spare‑part management while supporting process reproducibility on the shop floor. For tailored recommendations or to confirm holder compatibility, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 — and ask for assistance with the CNMM 160616 T9235 insert and matching toolholders Technical data Article number: 6785877 Manufacturer SKU: TUN6785877 Brand SKU: 6785877-Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: cemented carbide Grade/coating: T9235, CVD‑coated Facts Size: 16 mm Thickness: 6.35 mm Corner radius: 1.6 mm Cutting angle: 80° Clearance angle: 0° Hole: with cylindrical hole Special features Rhombic insert form Single‑sided chipbreaker ISO standard designation CNMM160616 Designed for external and internal turning Optimised for steels, interrupted cuts and unstable conditions FAQ Is this insert suitable for interrupted cutting in steel? The CNMM 160616 T9235 insert is specifically graded (T9235) and designed to cope with interrupted cuts in steel, offering enhanced toughness and resistance to chipping. Which holders are compatible with the insert? Compatibility depends on form, clearance angle, tolerance class, clamping and thickness; use the ISO designation CNMM160616 to find holders that match these parameters. What benefits does the CVD coating provide? The CVD coating on the T9235 grade increases wear resistance while the tough carbide substrate supports stable performance under lower cutting speeds and unstable conditions. How does the corner radius affect performance? A corner radius of 1.6 mm improves edge strength and helps maintain surface finish during heavier or interrupted cuts, reducing the risk of premature edge failure. Can this insert be used for internal turning? Yes, the insert’s geometry and ISO form permit both external and internal turning when matched with an appropriate boring bar or internal holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 190608 T9215 Wendeplatten - Tungaloy
Benefit from the combination of high wear resistance, reliable fracture toughness and precise geometry for consistent turning performance; the T9215 grade and 80° rhombic form deliver productivity and process stability. Order the insert directly via Metav Werkzeuge or consult the technical advisers for application-specific recommendations. CNMM 190608 T9215 Turning Insert – Tungaloy, CVD-coated carbide, 80° rhombic The CNMM190608-TUS T9215 is an ISO-standard indexable turning insert intended for medium-steel machining, optimised for continuous to light interrupted cuts and compatible with standard 80° rhombic holders. CNMM 190608 form, 80° rhombic geometry CVD-coated carbide grade T9215 for steels Cylindrical hole for secure clamping 0.8 mm corner radius for precise profiles Precise fit and predictable clamping for reliable setups The insert follows the ISO CNMM190608 specification so holder compatibility is defined by form, clearance angle, tolerance class, size and thickness; this ensures repeatable seating and clamping in a matched toolholder. When the clamping system and underlay/shim are selected to match the cylindrical hole, setup time is reduced and tool life becomes more predictable. The standardised geometry supports quick tool changes and unchanged cutting kinematics across batches, which is particularly valuable in series production where process stability is paramount. Coating and grade engineered for productive steel turning The cutting material is a CVD-coated carbide in grade T9215, designed as a first choice for medium-steel applications by combining wear resistance with good fracture toughness. This coating system extends life in continuous operations and resists flank and crater wear under stable cutting conditions. For shops aiming to increase throughput, the grade enables higher cutting volumes before index changes, while still maintaining dimensional accuracy on turned components. The balanced properties make it suitable where a mix of surface finish and economy is required. Geometry and chip control for surface quality and process safety The 80° rhombic geometry with a 0.8 mm corner radius concentrates cutting forces favourably for external and internal turning, helping to deliver consistent surface finish and tool-run stability. The integrated TUS chipbreaker shapes chips for reliable evacuation at common turning parameters, lowering the risk of entanglement in bores or on long parts. The combination of rhombic form and dedicated chip control supports both general-facing and profilng operations while reducing vibration-related issues, especially when paired with appropriate holder rigidity. Operational advantages and selection guidance for turning tasks As an indexable insert for turning, the component fits into a system comprising insert, matched holder or bar, underlay/shim and fasteners; the choice of chipbreaker and grade should match workpiece material and whether the cut is continuous or intermittently interrupted. For medium steels, the T9215 grade with TUS breaker generally yields a good compromise between productivity and edge security. Component manufacturers benefit from reduced changeover time, predictable insert life and consistent part quality, supporting lean processes and lower per-part tooling costs. For tailored machining recommendations and supply of Tungaloy CNMM190608-TUS T9215 turning inserts, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com for rapid, application-specific advice and procurement. Technical Data Article number: 6773846 SKU: 6773846-Tungaloy Manufacturer SKU: TUN6773846 Model series: ISO indexable turning inserts Designation: CNMM190608-TUS Name: CNMM190608-TUS T9215 Tungaloy insert Core Technical Data Corner radius: 0.8 mm Thickness: 6.35 mm Inscribed circle / size: 19 mm Included angle: 80° Clearance angle: 0° ISO code: 190608 Special Features Material: carbide Coating / grade: CVD-coated, T9215 Chipbreaker: TUS Hole: cylindrical hole for secure clamping Shape: rhombic Application: turning (external and internal) Suitable for: medium steel, continuous to light interrupted cuts FAQ Which materials is this insert suitable for? The Tungaloy CNMM190608-TUS T9215 insert is optimised for medium-steel machining; the T9215 grade offers wear resistance and fracture toughness suited to continuous and lightly interrupted cuts. What geometry and clamping does the insert use? The insert features an 80° rhombic form with a cylindrical hole for clamping; holder compatibility depends on form, clearance angle, tolerance class, size and thickness, so matching the toolholder is essential. What advantages does the T9215 grade provide during production? Grade T9215, a CVD-coated carbide, combines high wear resistance with good edge security to support productive turning and longer index life under stable cutting conditions. Is the insert suitable for both external and internal turning operations? Yes; the CNMM190608-TUS geometry and chipbreaker support both external and internal turning, with the chip control and corner radius selected to maintain surface finish and process stability. How should the matching holder and clamping system be selected? Select a holder that matches the CNMM form, 80° seating and thickness 6.35 mm; ensure a compatible shim/underlay and fasteners for correct clamp pressure and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190608 T9225 Wendeplatten - Tungaloy
Combine the robust T9225 CVD coating with the ISO‑standard rhombic form to secure consistent performance in medium‑to‑heavy turning operations; the cylindrical centre hole supports reliable clamping and fast tool changes. Order the CNMM190608‑TUS T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. CNMM 190608 T9225 Turning Insert — Tungaloy CNMM190608‑TUS T9225 is an ISO‑standard indexable insert designed for external and internal turning of steel, offering a robust universal grade for interrupted and variable cutting conditions. ISO‑standard rhombic indexable insert CVD‑coated carbide grade T9225 Designed for medium to heavy steel turning Cylindrical centre hole for secure clamping Reliable performance under varying engagement conditions The T9225 grade is a CVD‑coated carbide developed as a robust universal grade for medium‑to‑heavy steel machining. Its coating enhances wear resistance while the substrate maintains toughness, which helps to absorb intermittent cuts and fluctuating engagement. For production environments where tool life and process stability matter, this combination results in consistent cutting behaviour, less unplanned downtime and predictable tool-change intervals. The insert’s geometry promotes stable chip formation, reducing the need for frequent adjustments. Compatibility and clamping that speeds up setup As an ISO‑standard insert, the CNMM190608‑TUS fits holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The cylindrical centre hole and rhombic shape allow secure clamping with common clamp kits and replacement screws, enabling quick indexing and repeatable positioning. This reduces setup time and minimises variation between shifts, making it suitable for both single‑piece and batch production. The 80° lead angle and 0° clearance specification support versatility across external and internal turning tasks. Practical benefits for workshop productivity Using an indexable insert with the T9225 specification simplifies stockkeeping and tool management: one geometry covers several turning tasks, while the CVD layer extends usable life compared with uncoated grades. The insert’s 0.8 mm corner radius helps achieve a balance between edge strength and surface finish, and the rhombic form supports access to tighter contours. For workshops seeking a cost‑effective, reliable solution, this insert offers productive machining, easier tool changes and predictable performance under mixed cutting conditions. For application advice or to check availability of the Tungaloy CNMM190608‑TUS T9225 insert, please contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6781283 Manufacturer SKU: TUN6781283 SKU: 6781283-Tungaloy Model series: ISO turning indexable inserts Material: Carbide Grade/coating: T9225 (CVD‑coated carbide) Facts Size: 19 mm Thickness: 6.35 mm Corner radius: 0.8 mm Lead angle: 80° Clearance angle: 0° Hole style: cylindrical hole Special features Rhombic plate form (CNMM) Chipbreaker: TUS ISO designation: CNMM190608‑TUS Suitable for external and internal turning Robust universal grade for medium to heavy steel turning Compatible with matching external holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert suited for? The CNMM190608‑TUS T9225 insert is intended primarily for steel machining and is optimised for medium‑to‑heavy turning operations where toughness is required. What does the T9225 grade mean for tool life? T9225 denotes a CVD‑coated carbide grade focused on durability and stable wear behaviour; the coating and substrate combination extends tool life under variable cutting conditions. Can this insert be used for interrupted cuts? Yes. The robust universal grade and insert geometry of the CNMM190608‑TUS make it suitable for interrupted cuts and changing engagement scenarios. Which clamping system is required? A compatible ISO‑style holder that matches the CNMM form, thickness (6.35 mm), size (19 mm) and fastening method is required; the cylindrical centre hole facilitates secure clamping with standard clamp kits. Is the insert indexable and easy to replace? The CNMM190608‑TUS is an indexable insert designed for quick indexing and replacement, supporting efficient tool changes and reproducible positioning. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
CNMM 190612 T9215 Wendeplatten - Tungaloy
Benefit from the CVD‑coated carbide T9215, the ISO CNMM190612 rhombic insert with 1.2 mm corner radius and 6.35 mm thickness for robust, productive turning in medium steel; order the original article directly via Metav Werkzeuge or contact our consultants for application advice. CNMM 190612 T9215 — ISO rhombic turning insert for turning by Tungaloy A CNMM190612 T9215 indexable insert designed for ISO‑standard external and internal turning, combining a CVD‑coated carbide grade for high wear resistance and reliable performance in continuous to light interrupted cuts. CVD‑coated carbide T9215 for medium steel ISO CNMM190612 rhombic geometry 1.2 mm corner radius for robust edge 6.35 mm thickness for increased stability Consistent performance for medium‑steel production The CVD‑coated carbide grade T9215 delivers high wear resistance coupled with strengthened fracture toughness, making the insert particularly suitable for the demands of medium‑steel turning. The coating reduces flank wear and prolongs effective cutting life, which supports higher productivity in continuous or lightly interrupted cutting conditions. For production planners, this translates into fewer insert changes, more consistent cycle times and better machine uptime. Geometry and edge design that improve process reliability Manufactured to the ISO CNMM190612 form, the rhombic shape and 80° principal angle provide a balance between strength and access to the cutting zone. The 1.2 mm corner radius offers a robust cutting edge that tolerates increased feed rates, while the single‑sided chipbreaker assists reliable chip formation when machining typical steels. The insert’s cylindrical hole and the specified 6.35 mm thickness contribute to secure clamping and reduced vibration, helping to maintain surface integrity and dimensional repeatability. straightforward integration into ISO tool systems The insert is part of a standard ISO turning system: indexable insert, matching external holder or boring bar, shim/clamp set and replacement screws. Compatibility with a chosen holder depends on form, clearance angle (0°), tolerance class, fastening type, size and thickness; attention to these dimensions ensures correct seating and clamping. The standardised CNMM form simplifies procurement and interchangeability across tool programmes, reducing inventory complexity for toolrooms. Practical advantages for toolroom and production use Choosing this grade and geometry supports a pragmatic combination of tool life and process security. The CVD coating reduces adhesive and abrasive wear mechanisms, while the carbide substrate provides the core toughness to resist chipping. For manufacturers seeking reproducible results and a cost‑effective process, this insert enables productive material removal with controlled chip behaviour and predictable regrinding or replacement intervals. For application advice or to request matching holders and clamping kits, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930; specialists are available to recommend the correct holder geometry and process parameters for Tungaloy turning inserts. Technical Data Article number: 6773838 Manufacturer SKU: TUN6773838 Model series: ISO turning inserts Designation: CNMM190612 Grade: T9215 Material: carbide Numbers / Core technical data Insert size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Principal angle: 80° Clearance angle: 0° Special features Coating: CVD Hole: with cylindrical hole Chipbreaker: single‑sided Application: external and internal turning Suitability: continuous to light interrupted cuts Compatibility note: determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ Which materials is this insert best suited for? The CNMM190612 T9215 insert is tailored for medium steel machining; the Tungaloy T9215 grade combines wear resistance and fracture toughness suitable for continuous and lightly interrupted turning operations. How does the insert secure in the holder and what must be matched? Correct seating requires a matching holder for the CNMM form; compatibility depends on the insert form, clearance angle (0°), tolerance class, fastening type, size (19 mm) and thickness (6.35 mm). What chip control can be expected with this geometry? The single‑sided chipbreaker of this rhombic insert promotes controlled chip formation for standard turning feeds, supporting safer evacuation and consistent surface finish during medium‑steel cutting. What key dimensions define the insert’s strength and access? The combination of an 80° principal angle, 1.2 mm corner radius and 6.35 mm thickness provides a robust edge with good access to the workpiece, balancing strength and cutting reach. Is this an original Tungaloy article and how is it identified? Yes — the article is supplied as the original Tungaloy product, CNMM190612 T9215, manufacturer item number 6773838 and SKU TUN6773838. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190612 T9225 Wendeplatten - Tungaloy
Benefit from the combination of a CVD‑coated carbide T9225 grade and precise ISO compatibility to secure robust performance in medium‑to‑heavy steel turning; the 80° rhombic geometry and 1.2 mm corner radius help deliver stable chip formation and reliable tool life. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. CNMM 190612 T9225 ISO turning insert for turning – Tungaloy CNMM190612 T9225 is an ISO indexable insert for general turning, designed for medium‑to‑heavy steel machining with a CVD‑coated carbide grade and rhombic 80° geometry CVD‑coated carbide grade T9225 ISO‑compliant CNMM 190612 geometry 80° rhombic form with 1.2 mm corner radius Single‑sided chipbreaker for reliable chip control Consistent performance under variable cutting conditions The CVD‑coated carbide substrate of the CNMM190612 T9225 provides a balanced combination of hardness and toughness, making it suitable for medium‑to‑heavy steel turning where intermittent cuts or varying engagement demand increased resilience. The T9225 grade is developed to maintain a stable cutting edge across changing conditions, reducing unexpected tool changes and improving overall machine uptime. This results in measurable efficiency gains on the shop floor through fewer interventions and steadier cycle times. Plug‑and‑play ISO compatibility for efficient tooling management Being an ISO‑standard insert, the plate fits holders that match by form, relief angle, tolerance class, fastening, size and thickness, which simplifies tool procurement and inventory management. The 80° rhombic shape with a central cylindrical hole and a thickness of 6.35 mm ensures straightforward mounting and repeatable clamping. Such standardisation lowers setup time and streamlines changeovers, enabling faster throughput and easier spares handling in high‑mix, high‑volume environments. Clear choice for chip control and surface integrity The single‑sided chipbreaker and 1.2 mm corner radius offer a compromise between edge strength and surface finish: the larger radius increases robustness in heavy cuts, while the chipbreaker geometry promotes consistent chip evacuation for safer machining. The CVD coating improves wear resistance at elevated temperatures, supporting longer tool life and consistent part quality. For turning applications requiring dependable repeatability and predictable tool behaviour, this insert is a practical option that helps maintain process stability. For tailored application advice and to source genuine Tungaloy CNMM190612 T9225 inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our team can support selection and supply. Technical data Article number: 6780849 Manufacturer SKU: TUN6780849 Model series: ISO‑Drehwendeschneidplatten (ISO turning indexable inserts) Material: carbide Facts Corner radius: 1.2 mm Included angle: 80° Relief angle: 0° Thickness: 6.35 mm Plate size: 19 mm Special features ISO designation: CNMM190612 Grade: T9225 (CVD‑coated carbide) Hole: with hole Hole style: cylindrical hole Plate form: rhombic Chipbreaker: single‑sided Application: turning FAQ What materials is this insert suited for? The CNMM190612 T9225 insert is formulated for steel machining, particularly medium‑to‑heavy turning applications where toughness and wear resistance are required. How does the T9225 grade affect tool life? The T9225 CVD‑coated carbide provides improved wear resistance at cutting temperatures, which typically results in longer tool life and more consistent performance for the CNMM190612 insert. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the ISO designation CNMM190612 matches standard rhombic 80° holders designed for this plate geometry. Does the insert have a chipbreaker and what is its benefit? Yes, the plate features a single‑sided chipbreaker that improves chip control and evacuation, reducing the risk of built‑up edge and improving surface quality during turning. What is the manufacturer SKU for ordering? The manufacturer SKU for this Tungaloy turning insert is TUN6780849, and the article number is 6780849. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190612 T9225 Wendeplatten - Tungaloy
Combining the CVD-coated T9225 grade with ISO CNMM190612 geometry and a 1.2 mm nose radius yields a robust solution for medium-to-heavy steel turning; the rhombic 80° shape and cylindrical fixing hole ensure broad holder compatibility and reliable clamping. Order the CNMM190612 directly via Metav Werkzeuge or consult the technical team for cutter-seat matching and process optimisation. CNMM190612 T9225 CNMM Turning Insert by Tungaloy – ISO rhombic 80° A CNMM190612 Tungaloy ISO rhombic turning insert engineered for medium-to-heavy steel turning with a CVD-coated carbide substrate and a single-sided chipbreaker. ISO CNMM190612 geometry, 80° rhombic CVD-coated carbide, T9225 grade Nose radius 1.2 mm for stable cuts Suitable for medium to heavy steel turning High, predictable cutting performance for tougher turning tasks The combination of CVD-coated surface treatment and a tough T9225 carbide formulation provides high resistance to abrasive wear while keeping fracture toughness for interrupted cuts. This indexable insert is designed for productive machining in variable engagement conditions; the coating reduces built-up edge and thermal wear, extending tool life and supporting consistent cycle times. The result is fewer tool changes and improved process reliability in batch and jobbing environments. Accurate fit and secure clamping reduce setup time Built to the ISO CNMM190612 standard, the insert's rhombic 80° geometry and cylindrical hole allow straightforward seating in compatible holders. Compatibility is determined by form, clearance, tolerance class, fastening, size and thickness, so matching the insert to the correct external holder avoids chatter and uneven wear. The 0° clearance specification and 6.35 mm thickness deliver predictable positioning; correct seating ensures repeatable indexability and stable tooloverhang for improved dimensional control. Controlled chip formation for safer machining and better finishes The single-sided chipbreaker is tuned for steel applications and helps break and evacuate chips reliably under medium to heavy cuts. Effective chip control reduces the risk of entanglement and contributes to a cleaner working area, while also supporting a consistent surface quality on the workpiece. With a 1.2 mm nose radius, the insert balances edge strength and surface finish, offering improved component appearance without compromising edge stability. Durable substrate and grade selection for lower total machining cost Manufactured from solid carbide and specified in the T9225 universal grade, this insert is intended for robust universal performance across a wide steel spectrum. The CVD coating combined with the grade's toughness reduces flank and crater wear under varying cut conditions, which translates into longer in-service life and better cost per part. For operations with occasional interruptions or variable engagement, this choice reduces scrap risk and supports steady production output. For reliable supply of original Tungaloy CNMM190612 inserts and application advice, contact Metav Werkzeuge for order placement and holder compatibility checks — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6780692 SKU: 6780692-Tungaloy Manufacturer SKU: TUN6780692 Model series: ISO turning indexable inserts Designation: CNMM190612 Grade: T9225 Core data Size: 19 mm Thickness: 6.35 mm Included angle: 80° Nose radius: 1.2 mm Clearance angle: 0° Hole: with hole (cylindrical) Special features Material: carbide Coating/grade: T9225 (CVD-coated) Shape: rhombic Chipbreaker: single-sided Application: turning Compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ Which workpiece materials are best suited to this insert? The CNMM190612 Tungaloy insert in grade T9225 is primarily intended for medium-to-heavy machining of steel, offering a balance of toughness and wear resistance for variable cutting conditions. Is the insert compatible with standard CNMM holders? Yes, the CNMM190612 geometry conforms to ISO standards; compatibility requires a matching holder for form, fastening and tolerance class to ensure correct seating and clamping. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker on this insert promotes reliable chip control during steel turning, improving evacuation and helping to maintain surface finish while reducing the likelihood of chip-related interruptions. Can this insert handle interrupted cuts or roughing? The T9225 carbide grade is described as a robust universal grade suitable for changed engagement conditions and light interruptions, making it appropriate for many roughing and semi-finishing scenarios. What are the fixing and indexing features of the insert? The insert includes a cylindrical hole for screw retention and is indexable according to ISO CNMM dimensions; correct clamping and torque are essential for repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190612 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9225, an 80° rhombic geometry and a 1.2 mm corner radius for dependable medium-to-heavy steel turning; order the insert via Metav Werkzeuge or consult our application specialists for tailored advice. CNMM 190612 T9225 Turning insert — Tungaloy, CVD-coated carbide, 80° rhombic The CNMM190612 T9225 is an ISO rhombic indexable insert designed for robust external and internal turning applications where interrupted cuts or variable engagement demand increased toughness. CVD-coated carbide T9225 80° rhombic geometry 1.2 mm corner radius Single-sided chipbreaker with hole Reliable cutting performance for medium-to-heavy turning The rhombic 80° geometry combined with the T9225 CVD-coated carbide grade delivers a stable cutting edge that tolerates varying engagement conditions. This combination is engineered for medium-to-heavy steel machining, providing a balance between edge robustness and wear resistance. The grade’s enhanced toughness reduces the risk of edge chipping during intermittent cuts, while the coating improves thermal stability and sliding behaviour at higher cutting speeds. Practical benefits include fewer unplanned tool changes and more consistent component quality. Secure seating and predictable clamping in ISO toolholders Designed as an ISO-conformant plate, the insert features a cylindrical locating hole and standard dimensions that ensure repeatable seating in compatible holders. The 6.35 mm thickness and the rhombic outline contribute to secure clamping and minimal micro-movement under load. As a result, setup times are reduced and repeatability between indexed positions is improved. For shops relying on predictable clamping behaviour, this leads to fewer rejects and a more stable production rhythm. Optimised chip control and extended tool life The single-sided chipbreaker profile is matched to typical steel-cutting conditions and supports reliable chip formation and evacuation. By guiding chips away from the cutting zone, the insert helps maintain surface finish and reduces heat concentration at the cutting edge. The 1.2 mm corner radius offers a compromise between strength and finish capability: it increases edge life while still permitting satisfactory surface quality on turned parts, particularly where robustness under variable engagement is required. Application advice and handling recommendations This indexable plate is best employed for external and internal turning on steels where changes in cut depth or interrupted sections are common. Use holders compatible with ISO rhombic inserts and ensure the clamping torque and seat cleanliness meet the toolholder manufacturer’s guidance. For optimal results, pair the insert with appropriate feeds and speeds that reflect the T9225 grade’s focus on toughness rather than extreme finishing parameters. If uncertain about parameter selection, a brief process trial with incremental adjustments will quickly establish the best balance between productivity and tool life. Choose the Tungaloy T9225 insert for robust, reliable turning in steel and contact Metav Werkzeuge for application support and availability (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 6780860 Manufacturer SKU: TUN6780860 SKU: 6780860-Tungaloy Model series: ISO turning inserts Application: Turning Measurements Size: 19 mm Thickness: 6.35 mm Corner radius: 1.2 mm Insert angle: 80° Clearance (relief) angle: 0° Features Material: carbide Coating/grade: T9225 (CVD-coated) Shape: rhombic Hole: with cylindrical hole Chipbreaker: single-sided Compatible with ISO holders FAQ What materials is this insert suitable for? The CNMM190612 T9225 indexable insert from Tungaloy is formulated primarily for steel machining and performs well in medium-to-heavy steel turning operations. Will the insert fit existing ISO rhombic holders? Yes — the plate follows ISO dimensions and the cylindrical locating hole ensures compatibility with standard ISO rhombic toolholders when form, size and thickness match the holder specifications. How does the T9225 grade affect tool life? The T9225 CVD-coated carbide grade emphasises toughness and thermal stability, offering improved resistance to chipping in interrupted cuts and consistent wear behaviour under variable engagement. What is the benefit of the 1.2 mm corner radius? A 1.2 mm corner radius increases edge strength and contributes to longer tool life in heavier cuts while maintaining acceptable surface finish for most turned components. Is this insert suitable for finishing passes? While the insert is optimised for robust performance, it can be used for semi-finish and certain finishing passes; however, for ultra-fine finishing a smaller corner radius or a grade optimised for low cutting forces may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
CNMM 190612 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of reliable chip control, robust CVD-coated carbide and ISO conformity to maintain stable turning processes even under interrupted cuts; order the CNMM190612 T9235 insert via Metav Werkzeuge or consult our technical team for tailored recommendations. CNMM 190612 T9235 CNMM indexable turning insert for turning – Tungaloy CNMM190612 T9235 is a rhombic ISO indexable insert engineered for external and internal turning, offering a tough CVD-coated carbide grade suited to lower cutting speeds and unstable conditions. CVD-coated carbide T9235 grade ISO‑standard CNMM 190612 form 80° rhombic shape for versatile turning Corner radius 1.2 mm with cylindrical hole Consistent chip control and durable cutting edge for interrupted cuts The CVD-coated T9235 grade is formulated as a tough carbide mix that gives reliable performance when conditions are less stable or the cut is interrupted. This indexable insert offers a balanced hardness and toughness combination, which reduces the risk of chipping while preserving a useful edge life. For production environments where tool life and predictable wear are required, the coating improves abrasion resistance and helps maintain dimensional consistency over longer tool cycles. Designed for ISO compatibility and straightforward mounting Built to the ISO‑standard CNMM190612 geometry, the insert matches holders that accept the CNMM form and the specified tolerance class. The 80° rhombic plate shape and the cylindrical hole enable secure clamping in a wide range of external and internal turning holders. This compatibility simplifies logistics and inventory management: standardised mounting reduces setup time and helps ensure repeatable positioning across machines and fixtures. Small corner radius for precise finishing and versatility With a 1.2 mm corner radius, the insert balances strength and surface finish capability. The radius permits stable cutting forces for semi-finishing while still enabling acceptable surface quality on many steels. The single-sided chipbreaker geometry supports controlled chip formation; choosing the correct chipbreaker and grade according to workpiece material and rigidity will directly influence cycle stability and component tolerances. Practical benefits for production planning and process reliability Selecting this grade and geometry supports predictable machining under less-than-ideal rigidity or interrupted cuts, delivering a cost-effective compromise between tool life and cutting performance. The combination of CVD coating, robust carbide substrate and standardised ISO form enables efficient replacement and reproduciÂÂble results across different lathes. For mixed-production shops machining a variety of steels, this insert reduces the need for frequent tool changes while maintaining process control. Contact Metav Werkzeuge for a personalised cutting-tool selection based on the CNMM190612 T9235 insert and receive direct advice or order support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6786055 Manufacturer SKU: TUN6786055 Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade/sort: T9235 Facts Corner radius: 1.2 mm Plate thickness: 6.35 mm Plate size: 19 mm Cutting angle: 80° Clearance (relief) angle: 0° Special features Rhombic plate form (CNMM) Cylindrical hole for secure clamping Single-sided chipbreaker CVD-coated carbide grade for tough steel conditions Intended application: turning ISO‑standard geometry for holder compatibility FAQ What materials is this insert suited for? The CNMM190612 T9235 insert is designed primarily for machining steel under lower cutting speeds and offers robust performance when conditions are unstable or cuts are interrupted. How does the T9235 grade differ from harder grades? The T9235 grade emphasises toughness over maximum hardness, so the cutting insert resists chipping and performs better with interrupted cuts compared with harder, more brittle grades. Can this insert be used for internal turning as well as external turning? Yes, the ISO CNMM190612 geometry and the 80° rhombic form allow mounting in holders suitable for both external and internal turning operations. What is the significance of the 1.2 mm corner radius? A 1.2 mm corner radius provides a compromise between strength and surface finish, enabling stable cutting forces for semi-finishing while maintaining acceptable surface quality. Is the insert supplied with a specific chipbreaker style? The insert features a single-sided chipbreaker, optimised for controlled chip formation in the targeted steel applications described for this grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com