Durable analogue calipers for reliable workshop measurement
Analogue calipers with Vernier scale serve as robust, battery-free measurement tools for external, internal, depth and step measurements, providing sustained precision in metalworking and quality assurance; their hardened stainless steel construction and matt chrome scales deliver exceptional durability and resistance to dirt while maintaining accuracy of up to 0.02 mm vernier scale, stainless steel, and depth measurement. Regular maintenance further extends service life and preserves repeatability, making them ideal for harsh workshop environments where power-independent tools are required. Available in various measuring ranges, jaw lengths and locking methods such as thumb clamp or locking screw, these calipers integrate seamlessly into mechanical inspection workflows.
200mm Precision Caliper Pocket Vernier 0.05mm Resolution, Stainless-Steel Pocket Case, Four-Point Measurement - Metav IndustryLine
Benefit from robust tool‑steel construction, a 0.05 mm vernier resolution and a fine‑adjustment thumbwheel for repeatable readings; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Pocket Caliper M201.043 — Analogue 0–200 mm, 0.05 mm, Tool Steel (Metav IndustryLine) The Pocket Caliper M201.043 is a compact analogue caliper designed for workshop and service measurements, offering a Standard 0–200 mm range with fine adjustment for controlled, repeatable readings. Analogue vernier, 0.05 mm resolution Fine adjustment for precise readings Four-measurement: inside, outside, depth, step Matt-chrome finish on tool steel Precision that supports consistent quality control The M201.043 pocket caliper combines an analogue vernier with a 0.05 mm scale pitch to deliver decisive readings for routine inspection tasks. The integrated fine adjustment thumbwheel reduces overshoot and allows measured closing speed to be controlled, converting a manual instrument into a reliable daily tool. Because the caliper is an analogue instrument with a traditional vernier, interpolation remains intuitive while the vernier layout supports quick visual checks on production parts. The four measurement functions—external, internal, depth and step—mean a single gauge replaces several workshop tools, improving throughput and reducing handling time. Compact design that balances reach and stiffness Classified in the Standard measuring-range category (up to 300 mm) the 0–200 mm span is optimised for everyday machining and metalwork: it offers the best compromise between reach and rigidity for benches and service trolleys. The compact profile and the relatively low mass (approx. 0.23 kg) make the caliper easy to manoeuvre in tight setups while the tool‑steel construction and matt‑chrome finish resist shop wear and light corrosion. Shorter jaw lengths and a narrow frame aid access to confined areas and support reproducible clamping when measuring small to medium components. Practical features that speed up measurement cycles Practical workshop details reduce friction in daily use: the instrument includes a depth gauge for slot and flange checks and a clear vernier arrangement for straightforward reading. The four-measurement capability simplifies task planning by enabling inside, outside, depth and step measurements with the same tool, cutting instrument swaps and saving cycle time. The engraved vernier markings and the controlled feed of the fine adjustment help reduce operator‑induced variation, giving more consistent data for in‑process checks or routine quality rounds. Simple care and where this caliper performs best For long service life, keep the sliding surfaces free of chips and lightly lubricated, protect the scale from heavy shocks and store the caliper dry. The M201.043 pocket caliper is particularly suited to general engineering workshops, maintenance departments and mobile service engineers who need a compact, robust measuring instrument that performs reliably for standard inspection tasks. Metav’s positioning as a precision partner ensures availability of compatible accessories and replacement parts across Europe, supporting continued tool performance and procurement efficiency. Discuss the M201.043 pocket caliper with Metav Werkzeuge to ensure workshop compatibility and to arrange procurement or specification support. Technical data Article number: M201.043 GTIN: 4054469100302 Category: Messschieber (calipers) Label: Pocket caliper 200 x 0.05 mm, tool steel, matt chrome Weight: 0.23 kg Material: Tool steel Finish: Matt chrome Measuring range: 0–200 mm Resolution: 0.05 mm Type: Analogue vernier caliper Depth gauge: yes Fine adjustment: yes Four-measurement capability: inside, outside, depth, step Nonius: 1/128" top and 1/20-39 mm bottom Jaw lengths: 50 mm / 17 mm Tariff number: 90173000 Numbers / Core technical data Weight: 0.23 kg Measuring range: 0–200 mm Resolution: 0.05 mm Jaw lengths: 50 mm / 17 mm GTIN: 4054469100302 Tariff number: 90173000 Design / Special features Tool steel body Matt‑chrome plated surface Analogue vernier scale Fine‑adjustment thumbwheel Four‑measurement design (inside, outside, depth, step) Depth gauge included Pocket caliper format Nonius specification included FAQ What resolution and reading accuracy does this caliper provide? The M201.043 pocket caliper features a 0.05 mm vernier division and is an analogue instrument; this resolution is suitable for standard workshop inspection and assembly tasks. Which measurement types can be performed with the caliper? This caliper supports four measurement modes: external, internal, depth and step measurements, allowing versatile use across a range of components. Is the instrument suitable for everyday workshop use? Yes; the pocket caliper from Metav IndustryLine is designed for routine machine‑shop and maintenance work where a compact, robust and easy‑to‑handle gauge is required. How does the fine adjustment help in measurement? The fine‑adjustment thumbwheel permits controlled sliding and precise closing of the jaws, reducing overshoot and improving repeatability during delicate measurement tasks. What maintenance is recommended to preserve accuracy? Keep the scale and sliding faces clean, protect from heavy impacts, apply light lubrication to sliding surfaces and store the caliper in a dry place when not in use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Pocket Caliper 0.05mm Nonius, Moment Lock, Monoblock, Depth Rod, Supplied in Case - Metav IndustryLine
Take advantage of a compact yet robust measuring solution with a 200 mm stainless steel pocket caliper that delivers 0.05 mm vernier precision and repeatable readings thanks to a moment lock; order directly via Metav Werkzeuge or contact the consultants for technical advice. Pocket Caliper M201.042 by Metav IndustryLine — 200 mm, 0.05 mm vernier with moment lock The Pocket Caliper M201.042 is a compact, DIN 862‑compliant caliper designed for workshop and field measurement, offering a balance of reach and rigidity for standard mechanical and maintenance tasks. Compact 200 mm workshop caliper Vernier resolution 0.05 mm and inch scale Moment lock for repeatable readings Depth gauge and four-way measurement Accurate readings for routine and precise checks The compact design combines a 200 mm measuring range with a vernier resolution of 0.05 mm, offering the proven accuracy expected under DIN 862. The mechanical vernier and an inch indicator provide direct, traceable readings without reliance on batteries or electronics, which reduces downtime in field and workshop environments. This analogue measurement principle supports fast, consistent checks of external dimensions, internal bores, step heights and depths, ensuring that routine quality controls run smoothly and predictably. Robust design for everyday workshop use Constructed from stainless steel with a monoblock frame and matt chrome finish, the instrument resists corrosion and maintains stability during regular handling. The compact format classifies it as a standard workshop caliper — the common balance between reach and stiffness — making it suitable for general engineering, maintenance and fabrication tasks. The compact jaws and protected profile permit reliable use in confined spaces while preserving measurement integrity over repeated cycles. Practical handling and repeatable measurement workflow A moment lock secures the sliding jaw at the set position, enabling reproducible results when transferring measurements or checking several identical parts. The tool incorporates a depth gauge and, thanks to four‑way measurement capability, supports internal, external, step and depth measurements without additional accessories. A thread reference chart is printed on the reverse side to support quick workpiece identification and expedite inspection routines. Ready for use and transport The caliper is supplied with a protective case for secure transport and storage and includes practical on‑tool aids for daily workflow. Its analogue construction requires no batteries and is immediately usable on the shop floor, while the durable finish and monoblock construction reduce the risk of wear‑related drift. For operations that value straightforward reliability and minimal maintenance, this instrument provides a dependable measuring companion. For dependable workshop measurement, select the Metav IndustryLine Pocket Caliper M201.042 — contact Metav Werkzeuge GmbH in Emmerich for expert advice and delivery arrangements at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.042 GTIN: 4054469100296 Norm: DIN 862 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.05 mm Vernier inch scale: 1/128" top (inch indication) Measurement types: external, internal, step, depth Special features Material: stainless steel Finish: matt chrome plated Monoblock construction Moment lock for repeatable readings Depth gauge integrated Thread chart on reverse side Analogue pocket caliper design Delivered in a protective case Pocket caliper intended for standard workshop use Jaw tip lengths: 50/17 FAQ How precise is the caliper for workshop checks? The caliper achieves a vernier resolution of 0.05 mm, suitable for standard workshop measurements in accordance with DIN 862; it provides reliable repeatability for everyday quality control. Can the tool measure depths and internal bores? Yes, the instrument features an integrated depth gauge and supports four‑way measurement (external, internal, step and depth), enabling versatile inspection tasks without additional tools. Is the caliper suitable for field and shop use? The stainless steel, matt chrome finish and monoblock design provide robustness for both workshop and field environments; the protective case aids secure transport. Does the caliper include any reference aids? A thread reference chart is printed on the reverse side to assist with quick identification of common thread sizes during inspection work. Is battery power required? No — this is an analogue vernier caliper that operates without batteries, ensuring immediate usability and low maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Pocket Caliper 0.05mm Resolution, Monoblock Stainless Steel, Moment Lock, DIN 862, Depth Rod, in Case - Metav IndustryLine
Benefit from a compact, workshop-ready caliper that combines stainless-steel durability, a 200 mm measuring range and a repeatable moment lock for consistent contact pressure; order directly via Metav Werkzeuge or consult the technical team for specification support. Pocket Caliper TOP (M201.076) — Metav IndustryLine, 200 mm / 0.05 mm, moment lock The Pocket Caliper TOP (M201.076) is a compact, DIN 862-compliant analogue caliper intended for standard machine‑shop and metalworking measurements up to 200 mm. Compact pocket caliper 200 mm range Analogue vernier with 0.05 mm resolution Moment lock for repeatable pressure control Matt chrome stainless monoblock construction Reliable workshop precision for everyday measurements The TOP pocket caliper delivers consistent results where repeatability matters. Built to DIN 862, the tool combines a 0–200 mm measuring range with an analogue vernier that provides 0.05 mm resolution, making it well suited to the typical demands of machine shops and maintenance workshops. The hardened monoblock frame resists bending and retains alignment during regular use, which reduces re‑checks and increases throughput on routine inspection tasks. This focus on measurable performance supports faster decision-making in production and quality control. Secure handling and durable construction for frequent use Ergonomics and longevity are prioritised in the design: the caliper features a moment lock that fixes the slider at a defined clamping torque, preventing variation from differing hand pressure and ensuring repeatable contact force across measurements. The body is manufactured from stainless steel with a matt chrome finish and fully hardened for wear resistance, while the compact format and low weight (approx. 0.24 kg) allow single-handed use and easy transport. These characteristics reduce handling fatigue and contribute to fewer measurement errors during long shifts. Versatile measurement modes for workshop tasks This analogue caliper supports four measuring functions — outside, inside, depth and step measurements — which condense multiple inspection routines into a single instrument and save tool-up time. The integrated depth probe and the jaw geometry (jaw length 50 / 17 mm) cover typical component checks without changing tools. Dual vernier scales provide metric and imperial referencing where required, and the presence of a thread reference table on the reverse side simplifies certain fastener checks. The sum is a compact instrument that increases operational flexibility while keeping the workflow lean. Practical benefits and quality assurance The combination of a hardened monoblock construction, clear vernier reading and the moment locking mechanism reduces measurement scatter and the need for repeated checks, delivering measurable time savings. The caliper is a standard-class instrument for shops that require dependable, repeatable measurements without the additional complexity of digital data transfer. A transport case is included for safe storage and shipment, keeping the instrument protected between uses. For dependable, workshop-grade precision from the TOP series, contact Metav Werkzeuge for tailored advice and immediate supply from Emmerich. Technical data Article number: M201.076 GTIN: 4054469100487 Norm: DIN 862 ECLASS: 21170344 Facts Measuring range: 0–200 mm Resolution: 0.05 mm Weight: 0.24 kg Jaw length: 50 / 17 mm Four measuring functions: outside, inside, depth, step Depth gauge: yes Special features Material: stainless steel, matt chrome plated, fully hardened Moment lock for repeatable clamping force Monoblock construction Analogue dual vernier scales (metric and imperial) Thread table on reverse side Delivery in transport case Labelled as TOP series FAQ Is the caliper suitable for everyday workshop use? The Pocket Caliper TOP (M201.076) is designed for standard workshop and metalworking measurements, offering a 0–200 mm range and robust construction for frequent use. What measuring functions are available with this caliper? The instrument provides four measuring functions — outside, inside, depth and step — enabling a wide range of routine inspection tasks with the Pocket Caliper TOP (M201.076). How repeatable are measurements with this model? Repeatability is enhanced by the built‑in moment lock and the hardened monoblock frame, which together reduce variation from differing hand pressure when using the Pocket Caliper TOP (M201.076). Is the caliper delivered with a case and any printed references? Yes, the caliper is supplied with a transport case and includes a thread reference table on the reverse side, as stated in the product details for the Pocket Caliper TOP (M201.076). Does this analogue caliper include digital data output? The Pocket Caliper TOP (M201.076) is an analogue instrument with dual vernier scales; no digital data output is specified for this model. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Internal Groove Caliper 0.05mm Vernier Matt Chrome Inox Kasten - Metav IndustryLine
Taking advantage of a compact 30–250 mm measuring range and a precise 0.05 mm vernier scale, this analogue inside‑groove caliper delivers reliable measurements for everyday workshop and production use; order directly via Metav Werkzeuge or consult our specialists for application advice. Inside‑Groove Vernier Caliper M201.137 — 30–250 mm range, 0.05 mm vernier The Inside‑Groove Vernier Caliper M201.137 is an analogue precision caliper designed to measure internal grooves and narrow slots in metalworking, toolmaking and assembly tasks. 30–250 mm measuring range 0.05 mm vernier resolution Matt chrome, INOX stainless finish Locking screw for secure readings Dependable precision for routine inspection tasks The Inside‑Groove Vernier Caliper M201.137 combines a practical measuring span with a fine vernier scale for clear, reproducible readings. The 30–250 mm span places the tool in the standard caliper class, offering the best balance between reach and rigidity for general mechanical and metalworking tasks. The vernier 0.05 mm graduation provides workshop‑grade resolution while the stated accuracy 0.15 mm reflects the instrument’s role as a robust checking tool rather than a metrology‑lab instrument. As an analogue vernier, it requires no power source and is immediately ready at the bench, which minimises downtime in routine quality checks and set‑up inspections. Robust materials and ergonomic handling for repeatable results Constructed from INOX (stainless steel) with a matt chrome finish, the frame and jaws resist corrosion and retain a consistent slide action under regular shop conditions. The caliper is fitted with an integral locking screw to secure the slider during measurement transfer and to reduce reading error caused by transient movement. The measuring jaws feature an 80 mm effective length suited to reach into groove profiles while remaining stiff enough to avoid twist under normal hand pressure. These material and design choices support repeatable measurements and a long service life in production environments. Practical application in production and workshop workflows This inside‑groove caliper is particularly useful for checking groove widths, seat depths and narrow slot dimensions during assembly, small‑batch machining and first‑article inspections. Its analogue nature makes it straightforward to interpret on the shop floor: the 0.05 mm scale allows quick conformity checks and the simple construction reduces the need for frequent recalibration. The tool integrates well with standard quality control routines where rapid verification and clear pass/fail decisions speed up throughput. For traceable metrology requirements, the caliper serves as a robust reference instrument within a broader inspection process. For purchase guidance or application support for the Metav IndustryLine inside‑groove caliper, please contact Metav Werkzeuge for tailored advice and delivery from Emmerich. Technical data SKU: M201.137 GTIN: 4054469100685 Eclass: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 30–250 mm Resolution (vernier): 0.05 mm Accuracy: 0.15 mm Jaw length: 80 mm Materials / Special features Material: INOX (stainless steel) Finish: matt chrome Type: Analogue vernier caliper (inside‑groove) Locking screw fitted FAQ How is the measuring range classified for this caliper? The inside‑groove caliper has a 30–250 mm range, classifying it as a standard workshop caliper suitable for general machine‑shop and metalworking tasks. What reading resolution and practical accuracy can be expected? The instrument provides a 0.05 mm vernier resolution; the specified operational accuracy is 0.15 mm, consistent with robust shop‑floor use. Is the caliper suitable for corrosive environments? The caliper is made of INOX (stainless steel) with a matt chrome finish, which improves resistance to corrosion under normal workshop conditions. Can this caliper measure narrow internal grooves effectively? Yes. The jaw geometry and 80 mm effective jaw length are designed to access and assess internal grooves and narrow slots reliably. Who manufactures the product and what is the SKU? The product is offered under Metav IndustryLine; the SKU is M201.137 and the GTIN is 4054469100685. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Brake Drum Vernier Caliper Three-Point, Inox Stainless Steel, 100mm Jaws, 0.1mm/0.05mm - Metav IndustryLine
Take advantage of a purpose-built instrument that combines workshop-grade durability, clear vernier accuracy and long jaws optimised for brake-drum measurement — the result is reliable, repeatable measurement in routine maintenance and quality checks. Order the caliper or consult Metav Werkzeuge for technical advice and delivery options. Brake-drum Caliper M201.183 — Stainless steel vernier, 300 mm outer range Brake-drum Caliper M201.183 designed for precise internal and external measurement of brake drums and similar rotating components in workshop and maintenance environments Stainless steel construction Dual vernier: 0.1 mm internal, 0.05 mm external 100 mm long jaws for brake-drum access Locking screw and transport box included Accurate vernier measurement for workshop efficiency The caliper delivers measurement reliability where it matters: a vernier scale configured to 0.1 mm resolution for internal dimensions and 0.05 mm for external measurements yields fast, verifiable results on rotating parts. Classified in the Standard range up to 300 mm, this instrument balances reach and stiffness for everyday machine‑shop tasks. Clear, mechanical reading makes the device independent of batteries and suitable for routine inspection rounds, improving throughput by reducing reading uncertainty and rework. Robust stainless-steel construction for frequent use Manufactured from stainless steel (INOX), the design resists corrosion and stands up to regular workshop handling. The 100 mm long jaws are shaped for secure access to brake drums while retaining jaw stiffness for repeatable contact. A solid locking screw secures the slide during measurement and transport. Delivery in a transport box ensures the instrument arrives protected and ready for immediate use, reducing the need for additional packaging before storage or use. Practical handling that speeds measurement cycles Ergonomic slide action and the extended jaw length allow quick positioning and less fiddling during measurements, which translates into shorter inspection cycles. The mechanical vernier avoids electronic downtime and is straightforward to clean and service, supporting continuous operation on the shop floor. The compact footprint and robust build make it a dependable choice for maintenance teams and quality inspectors who require a purpose-made tool for brake-drum and similar component measurement. Contact Metav Werkzeuge for tailored advice on the M201.183 and to arrange secure delivery from our Emmerich warehouse Technical data SKU: M201.183 GTIN: 4054469100982 ECLASS: 21170344 Tariff number: 90173000 Facts Outer measuring range: 300 mm Inner measuring range: 40–340 mm Jaw length: 100 mm Vernier resolution: 0.1 mm (internal) / 0.05 mm (external) Analogue vernier accuracy class: 0.1 mm Special features Material: stainless steel (INOX) Designed for brake-drum and rotating-part measurement Locking screw for secure measurement Delivered in transport box for protection Analogue vernier — no batteries required FAQ What measurement ranges does the caliper cover? The Brake-drum Caliper M201.183 covers an outer range of 300 mm and internal measurements from 40 to 340 mm, making it suitable for typical brake-drum dimensions. How precise is the vernier on this instrument? The vernier provides 0.1 mm resolution for internal measurements and 0.05 mm resolution for external measurements, offering workshop-level precision for routine inspections. What material is the caliper made from and why does it matter? The caliper is manufactured from stainless steel (INOX), which improves resistance to corrosion and wear in workshop environments and helps maintain measurement accuracy over time. Is the instrument ready for transport and storage on arrival? Yes, the caliper is supplied in a protective transport box to reduce handling damage and simplify storage between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Caliper Jaw Adapter For 4mm Max Jaw Thickness, Attachment For Caliper Measuring Tips - Metav IndustryLine
Take advantage of the combination of compatibility with standard calipers (0–300 mm), a maximum jaw thickness allowance of 4 mm, and a lightweight, easy-to-fit design to keep measurement tasks efficient and repeatable on the shop floor. Order the accessory directly via Metav Werkzeuge or consult the team for application advice. Measuring Adapter for Calipers M240.311 — fits 0–300 mm calipers, 4 mm max jaw thickness (Metav IndustryLine) Measuring Adapter for Calipers M240.311 is an attachment that extends the functionality of standard calipers, enabling secure use where jaw thickness or geometry would otherwise limit access Compatible with 0–300 mm calipers Accepts up to 4 mm jaw thickness Lightweight accessory — 0.05 kg Simple attachment for measuring jaws Extend caliper capability while preserving measurement quality The adapter transforms a standard caliper into a more versatile gauging tool without altering the instrument’s core accuracy. Designed for the Standard (0–300 mm) caliper class, the accessory accepts jaws up to 4 mm thick and is intended for direct, repeatable mounting on common analogue calipers. As a result, workshops gain access to otherwise awkward measuring points without the need for specialised instruments, improving throughput and reducing setup time. The compact mass of 0.05 kg minimises added inertia, so handling remains nimble and stable during routine inspection work. Quick fit and reliable handling for everyday workflows Installation emphasises speed and repeatability: the attachment clamps to the caliper measuring jaws and stays secure during typical measuring sequences. Being an analogue accessory it integrates seamlessly with mechanical verniers and digital calipers of compatible jaw thickness, preserving the original measuring functions and ergonomics. The straightforward design reduces training time for operators and supports faster measurement cycles, delivering a clear efficiency gain in production and quality control tasks. The robust fitting prevents slippage, enhancing confidence in measured values under normal workshop conditions. Practical choice for workshops and metrology suppliers As a small but effective accessory from Metav IndustryLine, the M240.311 suits both craft and light industrial environments where adaptability matters. It bridges the gap between specialist gauges and everyday calipers, enabling teams to meet measurement challenges without overcomplicating tool inventories. The accessory complements existing metrology equipment by expanding application range while keeping procurement and storage simple — an economical way to increase capability at the bench or in a service van. For straightforward integration into inspection routines or for advice on compatibility with a specific caliper model, contact Metav Werkzeuge to request the M240.311 measuring adapter or to discuss application specifics — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M240.311 GTIN: 4054469159508 Manufacturer: Metav IndustryLine Core data Suitable for calipers: 0–300 mm Max jaw thickness: 4 mm Weight: 0.05 kg Customs tariff number: 90178090 Special features Attachment for caliper measuring jaws Compatible with common standard calipers Class: Standard (0–300 mm) Analogue accessory FAQ Can this adapter be used on any caliper model? The adapter is compatible with calipers that have a measuring range up to 0–300 mm and jaws no thicker than 4 mm; check jaw geometry against the M240.311 dimensions for secure fit. Will the adapter affect the caliper’s accuracy? The accessory does not change the caliper’s internal measuring mechanism; measurement accuracy remains governed by the caliper itself, while the adapter provides improved access and handling for specific workpieces. Is the material specified for the adapter? The product specification does not list a base material; refer to the technical data or contact Metav Werkzeuge for detailed construction information if material composition is required for a particular application. What types of measurements can be carried out with the adapter fitted? All standard caliper functions remain available; the adapter facilitates improved engagement of the jaws for external or step measurements where jaw thickness or shape would otherwise obstruct access. Is this accessory suitable for regular workshop use? Yes — the adapter is designed for routine use in workshops and small production environments where extending caliper capability is preferable to introducing additional specialised gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Caliper 0.02mm Monoblock Matt Chrome, Pocket Size, Four-Function Measurement, Locking Screw, Plastic Case - Metav IndustryLine
Compact pocket format and robust monoblock construction combine for reliable workshop measuring with fine resolution and secure locking. Benefit from a clear 0.02 mm graduation and four measuring functions for versatile use. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Pocket caliper M201.055 — 300 mm range, 0.02 mm graduation, Metav IndustryLine Pocket caliper M201.055 provides compact, workshop-ready measuring for routine and precision tasks in metalworking and general engineering. Pocket caliper, 300 mm range 0.02 mm graduation for fine measurements Monoblock, matt chrome finish Locking screw for stable readings Compact precision for everyday workshop tasks The pocket caliper is designed as a compact, sturdy measuring tool for the common needs of a machine shop or service bench. With a measuring range of 0–300 mm it fits the Standard class of calipers, offering the best balance of reach and stiffness for typical components. The matt chrome surface reduces reflections and wear, while the monoblock construction maintains alignment under regular handling. As an analogue instrument with a vernier scale, it delivers tactile feedback and straightforward readings that are familiar to experienced machinists. Versatile four‑function measuring saves time and reduces tool changes Equipped for internal, external, depth and step measurements, the instrument supports the four primary caliper tasks without swapping tools. This four-measurement capability shortens inspection cycles and reduces the risk of handling errors. The vernier format complements these functions by offering an intuitive, mechanical readout; practitioners benefit from immediate results without dependence on batteries or electronics. Reliable conformity and secure reading for production use Constructed from stainless steel with a matt chrome finish, the caliper conforms to DIN 862 for vernier calipers and includes a positive locking screw to hold jaws steady during transfer or marking. A thread table on the reverse side extends functionality for fast reference. The robust build supports repeated use on the shop floor while preserving measurement consistency, making the tool suitable for everyday quality checks and assembly tasks where dependable readings matter. Clear measurement language for mixed-experience teams The analogue scale simplifies training: apprentices learn mechanical measurement fundamentals while experienced technicians appreciate the direct feel of the vernier. The instrument’s 0.02 mm graduation suits workshop tolerances and routine quality control; when finer laboratory precision is required, separate high-precision instruments are recommended. For straightforward component checks, jigs and fixtures or incoming inspection, this caliper reduces downtime and streamlines routine verification. For specification advice or to secure the Metav IndustryLine pocket caliper M201.055 for the workshop, contact Metav Werkzeuge in Emmerich or consult our technical team for application matching Technical data Article number: M201.055 GTIN: 4054469100401 Tariff number: 90173000 Brand: Metav IndustryLine Label: Taschen-Messschieber 300x0,02mm mattverchromt, Monoblock, 0,35 kg Facts Measuring range: 0–300 mm Graduation / resolution: 0.02 mm Scale type: analogue vernier Standard: DIN 862 Four-function measuring capability Special features Material: stainless steel (inox) Finish: matt chrome Monoblock design Locking screw present Thread table on reverse side Internal, external, depth and step measurements (four-measurement) FAQ What measuring range does the caliper cover? The pocket caliper M201.055 covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop tasks. What is the smallest division on the scale? The instrument provides a 0.02 mm graduation on an analogue vernier scale for fine workshop measurements. Which measurement types are possible with this caliper? Internal, external, depth and step measurements are all supported by the four‑function design of the Metav IndustryLine caliper M201.055. Is the caliper suitable for shop-floor use? Yes. The stainless steel construction, matt chrome finish and locking screw make the caliper robust and reliable for regular workshop inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Caliper 0.05mm Resolution Monoblock Matt Chrome, Monoblock, Four-Function Measurement, DIN 862, Supplied in Case - Metav IndustryLine
Combine the 300 mm measuring range, familiar analogue vernier reading to 0.05 mm, and robust matt‑chromed stainless construction for dependable shop measurements; order the instrument directly via Metav Werkzeuge or consult our advisors for application advice. M201.053 Pocket Caliper — 300 mm vernier, 0.05 mm resolution (Metav IndustryLine) The M201.053 pocket caliper is a compact, analogue measuring instrument designed for standard workshop tasks up to 300 mm; it combines a matt‑chrome monoblock frame with vernier scales for practical, repeatable dimensional checks. Compact 300 mm pocket format Vernier resolution 0.05 mm Matt chrome monoblock stainless frame Includes protective transport case Precise, reliable measurements for everyday workshop use This analogue caliper is classified in the Standard range (measuring capacity up to 300 mm), which offers the best compromise between reach and stiffness for general machine and metalworking tasks. The vernier layout provides a readable 0.05 mm resolution, supporting precise checks without electronic dependence. Compliance with DIN 862 underlines suitability for routine quality control; thanks to the four‑way measurement capability — inside, outside, depth and step — the instrument covers the essential measurement tasks encountered on the shop floor. Robust, compact construction for portable use The instrument features a monoblock frame finished in matt chrome over stainless steel, delivering corrosion resistance and long service life in demanding environments. A locking or fixing screw secures the slider for stable readings during transfer or marking. The pocket‑sized form factor and the supplied protective case simplify transport and storage, making the caliper a practical companion for mobile inspection rounds or bench work where space is limited. Simple analogue operation and practical handling Reading the vernier is straightforward: note the main scale reading, then add the vernier line that aligns with the main scale for the fractional step. The caliper provides vernier scales in both systems (top: 1/128", bottom: 1/20–39 mm), which supports mixed‑unit workflows and quick checks without conversion tools. The mechanical design prioritises tactile feedback and reliability; this makes the tool especially handy where digital electronics are unnecessary or where robustness and immediate readability are preferred. The instrument from Metav IndustryLine is therefore well suited to workshop metrology, maintenance teams and quality inspectors who value dependable analogue measurement. Speak to Metav Werkzeuge for personalised measurement guidance and to specify the Metav IndustryLine pocket caliper M201.053 for consistent, shop‑ready precision. Technical Data Article number: M201.053 GTIN: 4054469100388 Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.05 mm (vernier) Type: Analog vernier caliper Special features Material: stainless steel Finish: matt chrome monoblock frame Vernier scales: top 1/128" and bottom 1/20–39 mm Fixing screw Four‑way measurement: inside, outside, depth, step Delivered in protective case FAQ What is the intended application for this caliper? This pocket caliper M201.053 from Metav IndustryLine is intended for standard machine‑shop and metalworking measurements where a 0–300 mm range and robust analogue operation are required. Which measurement functions are available on the instrument? The caliper supports four‑way measurement — external, internal, depth and step — enabling versatile checks without changing tools. How accurate is the vernier and how is it read? The vernier provides a 0.05 mm resolution; read the main scale first, then add the vernier line that aligns with the main scale for the fractional value. The instrument includes both inch and metric vernier scales for mixed‑unit use. Is the caliper corrosion‑resistant? The matt chrome finish over a stainless steel monoblock frame gives effective resistance against corrosion and wear in workshop conditions. Is a calibration certificate included with the caliper? The M201.053 is supplied as a standard workshop instrument; an ISO 17025 calibration certificate is not included unless explicitly stated for a specific delivery. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Precision Caliper 0.05mm Resolution, Locking, Fine Adjustment, Matt Chrome Finish - Metav IndustryLine
Take advantage of a compact 0–300 mm measuring range combined with a vernier resolution of 0.05 mm and a practical fine-adjustment mechanism for reliable workshop checks; order the Pocket caliper M201.024 directly via Metav Werkzeuge or ask our consultants if needed. Pocket caliper M201.024 — pocket caliper with vernier and fine adjustment, Metav IndustryLine The Pocket caliper M201.024 is a compact analogue measuring instrument for everyday workshop and field use, offering precise linear measurements, a depth probe and a locking device for repeatable results. Compact 0–300 mm measuring range Vernier scale with 0.05 mm resolution Fine adjustment and locking screw Matte chrome finish on tool steel construction Precision where it counts for routine inspection Built around a classic vernier layout, this analogue caliper delivers 0.05 mm incremental readings that match the industrial standard for mechanical verniers. The dual-scale vernier arrangement provides fine resolution for external and internal measurements, while the integrated fine adjustment allows controlled approach to the measuring faces, reducing overshoot and measurement scatter. As a result, routine dimensional checks benefit from stable readings without the need for batteries or electronic components, ensuring dependable operation across shift changes and on-site inspections. Robust design for workshop and mobile use The main profile is manufactured from tool steel and finished with a matte chrome plating that reduces glare and improves resistance to everyday wear. A dedicated locking screw secures the jaw position for transport or transfer of dimensions, and the built-in depth gauge extends the instrument’s usefulness beyond simple jaw-to-jaw measurements. Together, these design choices create a tool that copes with the practical demands of metalworking, maintenance and field service, combining low maintenance with tangible durability. Measurement modes and handling benefits This caliper covers external, internal and depth measurements with one compact instrument, and the vernier layout is optimised for quick visual readings in standard workshop conditions. The instrument’s classification within the Standard (100–300 mm) range strikes a balance between reach and stiffness, making it suitable for general machine‑shop tasks such as component checks, assembly control and routine quality assurance. The absence of electronics simplifies handling and long-term storage, while the fine-adjustment feature supports precise alignment when measuring small features or close tolerances. Contact Metav Werkzeuge GmbH in Emmerich for tailored advice on workshop integration or to arrange purchase directly from our European warehouse, Metav Werkzeuge is ready to assist with specifications and delivery options. Technical Data Article number: M201.024 GTIN: 4054469100197 TARIC/HS code: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.05 mm (vernier) Analogue instrument: vernier type Dual vernier configuration for fine readings Special features Material: tool steel Finish: matte chrome plating Fine adjustment (feineinstellung) Locking screw for repeatability Depth gauge included Standard class (100–300 mm) Pocket caliper design, analogue operation Suitable for workshop and field measurements FAQ How accurate is the M201.024 pocket caliper for routine workshop checks? The M201.024 pocket caliper provides 0.05 mm vernier resolution, matching the common industrial analogue standard for mechanical calipers and making it suitable for everyday dimensional control in metalworking. Which measurement functions does this caliper support? The instrument covers external, internal and depth measurements via its jaws and integrated depth probe; the fine-adjustment and locking screw aid reproducible setting transfer with the M201.024 pocket caliper. What materials and finish are used on the caliper? The caliper is constructed from tool steel with a matte chrome finish to improve durability and reduce reflections during measurement tasks. Is the caliper suitable for mobile or field use? Yes — the compact pocket form factor, locking screw and analogue vernier format make this caliper practical for on-site and mobile inspection without reliance on batteries. Can the vernier be read quickly in workshop lighting? The dual vernier layout and matt finish are chosen to enhance contrast and legibility under typical workshop lighting conditions, supporting faster and more reliable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Pocket Vernier Caliper 0.05mm Resolution Matt Chrome Stainless Steel Monoblock, Moment Lock, Depth Rod, Four-Point Measurement, DIN 862 - Metav IndustryLine
Take advantage of precision, robust Monoblock construction and repeatable measuring pressure for reliable workshop measurements; order the Pocket Vernier Caliper TOP 300 x 0.05 mm directly via Metav Werkzeuge or request advice from our consultants for specification matching. Pocket Vernier Caliper TOP 300 x 0.05 mm (Analogue, Monoblock) The Pocket Vernier Caliper TOP 300 x 0.05 mm is a compact, stainless‑steel analogue caliper designed for standard workshop and metalworking measurement tasks where portability and repeatable results are required. Pocket format, 300 mm measuring range Vernier resolution 0.05 mm, DIN 862 Moment locking for consistent measuring pressure Monoblock stainless steel, matt chrome finish Reliable range and repeatability for everyday workshop use This caliper covers a 0–300 mm measuring range, which places it in the workshop standard category: the best compromise between reach, stiffness and one‑hand operation. The mechanical vernier offers a resolution of 0.05 mm in accordance with DIN 862, providing an industry‑recognised baseline for routine quality control and machining tasks. The hardened stainless steel construction with a matt‑chrome finish reduces surface wear and keeps the scale legible over prolonged use, supporting consistent, traceable measurements across production runs. Consistent measuring pressure and four measurement modes A defining functional advantage is the moment locking mechanism that secures the slider at a defined clamping torque. This reduces variation caused by different operator pressure and improves reproducibility when comparing multiple parts. The instrument supports four‑way measurement — outside, inside, depth and step — and the calibrated depth probe extends the tool’s usefulness beyond simple gap checks. For repetitive tasks this translates into fewer re‑measurements and lower process variability. Robust design and practical handling details The monoblock body increases torsional stiffness for reliable readings over the full 300 mm span while keeping the unit compact enough for mobile use. A clear vernier arrangement (upper scale 1/128", lower scale 1/20–39 mm) provides traditional analogue readability without reliance on electronics, which suits environments where robustness and simplicity are priorities. Additional practical features include a thread table printed on the reverse side and a beak geometry (60/25 mm) that balances reach and accessibility for small features. Workshop integration and quality assurance Delivered with a transport case for secure handling and storage, this caliper is ready for immediate use in machine shops, toolrooms and inspection benches. The hardened measuring surfaces and matt finish minimise wear, helping the instrument retain its calibration over time. For organisations seeking traceability, the product specification, material and conformity to DIN 862 provide a clear basis for integration into inspection routines and production control. For dependable, compact precision with Monoblock stability, contact Metav Werkzeuge for purchasing guidance or to arrange prompt delivery from Emmerich. Technical Data SKU: M201.078 GTIN: 4054469100500 Label: Taschen‑Messschieber TOP 300x0,05mm Momentverstellungf. mattverchromt, INOX, Monoblock Facts Measuring range: 0–300 mm Resolution: 0.05 mm Weight: 0.36 kg Beak length: 60/25 mm Standard: DIN 862 Special features Material: stainless steel, matt chrome, fully hardened Moment locking for repeatable clamping pressure Monoblock construction for increased stiffness Vernier scales: 1/128" upper, 1/20–39 mm lower Four‑way measurement: outside, inside, depth, step Thread chart on the reverse side Delivered in a transport case Analogue vernier instrument FAQ Is this caliper suitable for general machine‑shop work? The Pocket Vernier Caliper TOP 300 x 0.05 mm is designed for standard machine‑shop and metalworking tasks; its 0–300 mm range and DIN 862 conformity make it a universal everyday instrument. Does the caliper offer consistent results between operators? Yes, the moment locking feature on the TOP 300 x 0.05 mm secures slider pressure to reduce operator‑dependent variation and improve repeatability. What measurement types can be performed with this instrument? The caliper supports outside, inside, depth and step measurements; the depth probe and beak geometry extend its practical use for multiple inspection tasks. Is the measuring surface protected against wear? The hardened stainless steel construction with a matt‑chrome finish provides durable measuring faces that resist wear and help maintain scale legibility. Is a case included for storage and transport? A transport case is supplied with the instrument to protect the caliper in transit and during storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper 0.02mm Resolution Monoblock Matt Chrome, Moment Lock, Depth Rod, Four-Point Measurement - Metav IndustryLine
Take advantage of precise 0–300 mm measurement capability, a 0.02 mm vernier resolution and a robust monoblock stainless‑steel build for reliable workshop checks; order the caliper directly via Metav Werkzeuge or consult our technical advisors if specification clarification is required. M201.056 Pocket Caliper — 0–300 mm, 0.02 mm vernier (Metav IndustryLine) The M201.056 is a pocket caliper designed for everyday workshop control and fine mechanical work, combining a compact format with a matt chrome‑plated monoblock construction and a repeatable moment lock. Compact pocket caliper design Resolution 0.02 mm for precise readings Moment lock for repeatable clamping Supplied in protective case Precision where it counts The instrument delivers a 0–300 mm measuring range with a 0.02 mm vernier graduation, placing it in the Standard caliper class (100–300 mm) ideal for most machine‑shop and metalworking tasks. The analogue vernier adheres to DIN 862, providing a clear mechanical readout and a reliable tolerance band for routine quality control. The measured values are immediately usable for incoming inspections and production checks, while the mechanical vernier avoids battery dependency and offers tactile confirmation during adjustment. Designed for compact workshops and mobile use The pocket format and matt chrome finish reduce reflection and make the tool convenient to carry between benches or on the shop floor. The monoblock construction increases torsional rigidity, so measurements remain stable even when used single‑handed. The compact jaw geometry also supports measurements in tighter assemblies, and the short external‑jaw length offers improved access for small parts while preserving stiffness for repeatable results. Built for repeatability and practical handling A dedicated moment lock secures the slider at a consistent clamping torque, removing variation caused by manual overtightening and improving reproducibility across repeated checks. The caliper supports four‑way measurement — external, internal, depth and step — making it versatile for fixtures, housings and small components. A thread table on the reverse side provides a quick reference for common thread pitches during assembly or inspection tasks. Small details that save time in production Practical features include clearly graduated jaws (60/25 mm spec for jaw lengths) and a protective case for transport and storage, ensuring the instrument stays serviceable between uses. The analogue design means immediate operation without setup, and compliance with workshop standards ensures compatibility with existing inspection routines. The combination of robust stainless construction and straightforward mechanical reading reduces downtime and maintenance complexity. For precise, reliable workshop measurement consult Metav Werkzeuge and secure the Metav IndustryLine M201.056 pocket caliper with technical guidance tailored to production needs — contact our advisors in Emmerich for specification support and delivery arrangements Technical Data Article number: M201.056 GTIN: 4054469100418 Brand: Metav IndustryLine Label: Pocket caliper 0–300 mm, 0.02 mm, moment lock Category: Calipers Facts Measuring range: 0–300 mm Resolution / vernier graduation: 0.02 mm Jaw lengths: 60 / 25 mm Tariff number: 90173000 Standard: DIN 862 Special features Moment locking mechanism Monoblock stainless‑steel construction Matt chrome plating Four‑fold measurement: external, internal, depth, step Thread table on reverse side Supplied in protective case Analogue vernier design (no battery) FAQ What measuring range and resolution does this caliper offer? The Metav IndustryLine M201.056 pocket caliper offers a measuring range of 0–300 mm with a vernier graduation of 0.02 mm, suitable for standard workshop inspection tasks. Is the caliper suitable for internal and depth measurements? Yes, the instrument provides four‑way measurement capability — external, internal, depth and step — making it adaptable to a range of workshop applications. How does the moment lock improve measurement consistency? The moment lock on the M201.056 fixes the slider at a controlled clamping torque, preventing measurement variation caused by differing hand pressure and improving repeatability. Does the caliper conform to recognised standards? The caliper is manufactured in accordance with DIN 862, offering a familiar mechanical reading method for quality control procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper 0.05mm Resolution Monoblock, Moment Lock, Four-Function Measurement, Matt Chrome Case - Metav IndustryLine
Take advantage of a compact, workshop-ready design that combines reliable 0.05 mm resolution, robust stainless steel monoblock construction, and a repeatable moment locking mechanism for consistent clamping. Order directly via Metav Werkzeuge or consult the Metav team for application advice and availability. M201.054 Pocket Caliper — 0–300 mm, 0.05 mm, Metav IndustryLine M201.054 is a pocket-sized precision caliper designed for everyday metrology tasks in the workshop and quality-control bench, offering durable stainless-steel construction and an analog nonius for quick, reliable readings. Pocket caliper 0–300 mm, scale 0.05 mm Monoblock stainless steel construction Moment locking for repeatable clamping Four-function measurement: int./ext./depth/step Consistent precision for routine inspection and production control This pocket caliper delivers industrial-grade precision with a reading increment of 0.05 mm, matching the common workshop standard for reliable tolerance checks. The analogue nonius provides a direct visual measurement method that is easy to interpret for trained personnel, while the moment locking mechanism stabilises the jaw position for repeatable measurements. Together, these features reduce measurement scatter and help maintain consistent part quality during batch inspections, making the tool a pragmatic addition to both machine shops and service benches. Durable design that copes with daily handling Engineered as a monoblock instrument in stainless steel with a matte-chrome finish, this caliper resists corrosion and stands up to frequent handling. The compact footprint and pocket form factor suit technicians who move between machines or job sites, while the solid construction keeps the scale alignment stable over time. The combination of robust materials and straightforward mechanics lowers downtime and maintenance effort, supporting efficient workflows in busy production environments. Four measurement functions for versatile workshop tasks Equipped for outside, inside, depth and step measurements, the caliper offers practical versatility on a single tool. The integrated depth gauge extends measurement capability to recesses and bores, while the step measurement geometry enables fast checks of shoulders and offsets. This multi-function approach reduces tool changes and speeds up process checks, providing clear time-savings during set-up and troubleshooting without sacrificing measurement reliability. Proven standards and readable scaling for everyday use Designed to DIN 862, the instrument follows recognised workshop tolerances and handling conventions, simplifying documentation and inspection reporting. The analogue scale includes a dual nonius arrangement for fine graduations, allowing millimetre and inch-related cross-checks where needed. For users accustomed to digital readouts, the tactile feedback and immediate legibility of the nonius often improve reading discipline and reduce misinterpretation during quick checks at the machine. Contact Metav Werkzeuge for stock status, technical clarification and ordering for the M201.054 pocket caliper — local supply from Emmerich with practical delivery options and expert advice Technical data Article number: M201.054 GTIN: 4054469100395 ECLASS: 21170344 Customs tariff number: 90173000 Standard: DIN 862 Core specifications Measuring range: 0–300 mm Resolution: 0.05 mm Nonius: 1/128" (top); 1/20–39 mm (bottom) Jaw lengths: 60 / 25 mm Four-function measurement: inside, outside, depth, step Special features Material: stainless steel (inox) Construction: monoblock design Finish: matte chrome Mechanism: moment locking for repeatable clamping Scale type: analogue nonius Accessories: thread table printed on reverse side FAQ How precise is the M201.054 pocket caliper for routine inspections? The M201.054 pocket caliper provides a reading increment of 0.05 mm, which corresponds to the typical industrial analogue standard for reliable workshop measurements under DIN 862. Can the caliper measure depth and steps as well as external dimensions? Yes, the instrument supports four-function measurement: external, internal, depth and step measurements, enabled by the integrated depth gauge and step geometry. Is the caliper suitable for portable use on the shop floor? The stainless-steel monoblock design and compact pocket form make this caliper robust for portable shop-floor use while maintaining scale stability during routine handling. Does the caliper include a locking device for repeatable readings? The tool features a moment locking mechanism that ensures stable jaw clamping and helps to achieve repeatable measurements across multiple parts. What standard does the caliper conform to and how is the scale arranged? The caliper is manufactured to DIN 862 and uses an analogue nonius with both millimetre and inch-related graduations for straightforward cross-referencing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Caliper Pocket Analog 0.05mm Resolution Monoblock Matt Chrome Inox, Four-Point, Lock Screw - Metav IndustryLine
The compact combination of robust monoblock construction and 0.05 mm vernier accuracy delivers dependable workshop measurements in a pocket-ready format; benefit from a stainless steel body and integrated locking screw for repeatable results. Order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Pocket Caliper TOP 300 x 0.05 mm — analogue, monoblock stainless steel The Pocket Caliper TOP 300 x 0.05 mm is a compact analogue caliper designed for everyday workshop and machine‑shop measurement tasks, offering a sturdy monoblock body and a DIN‑compliant vernier. Pocket monoblock stainless steel body Measurement range 0–300 mm Vernier resolution 0.05 mm Includes locking screw and thread table Precision where it matters in the workshop The compact analogue caliper is built for reliable results in routine quality checks. With a measuring range of 0–300 mm and a vernier resolution of 0.05 mm, the instrument fulfils common workshop tolerances while conforming to DIN 862. The monoblock stainless steel construction raises rigidity and reduces flex, which directly improves repeatability for external and internal measurements. The integrated locking screw ensures that a set value remains fixed during transfer or comparison, helping to avoid handling errors. For machinists and maintenance technicians this equates to quicker inspection cycles and fewer rechecks. Designed for portability without compromise This pocket caliper combines portability with substantive workshop features. Weighing 0.43 kg, the tool is light enough for transport yet substantial enough to feel stable in the hand. As an analogue instrument there are no batteries to replace, which simplifies long‑term use and reduces downtime. A thread table printed on the reverse provides quick reference for screw measurements, turning the caliper into a practical multi‑purpose instrument during on‑site checks. The result is increased confidence in fast measurement tasks and a reduced need for multiple tools. Robust finish and versatile measuring functions Engineered for daily use, the caliper features a matt chrome finish over stainless steel for improved wear and corrosion resistance in workshop environments. The vernier scales include a fine top reading (1/128") and additional bottom graduations (1/20–39 mm), enabling classic analogue precision without electronic dependence. The tool supports four measurement functions — external, internal, depth and step — which covers the majority of inspection needs on components and assemblies. These practical attributes make the caliper a reliable choice for production, fitting and maintenance work. For the proven accuracy of the Metav IndustryLine pocket caliper and practical workshop design, contact Metav Werkzeuge for personalised advice and delivery from Emmerich Technical data Article number: M201.077 GTIN: 4054469100494 ECLASS: 21170344 Tariff number: 90173000 SKU: M201.077 Facts Measuring range: 0–300 mm Resolution: 0.05 mm Weight: 0.43 kg Norm: DIN 862 Analogue: yes Special features Material: inox (stainless steel) Monoblock design Vernier: 1/128" top; 1/20–39 mm bottom Locking screw present Thread table on reverse Four measurement functions: inside, outside, depth, step FAQ What accuracy can be expected from this caliper? The Pocket Caliper TOP 300 x 0.05 mm (Metav IndustryLine, SKU M201.077) provides analogue vernier readings to 0.05 mm, meeting standard workshop tolerances under DIN 862. Is the caliper suitable for internal and depth measurements? Yes. The caliper supports external, internal, depth and step measurements as standard, enabling the four measurement functions commonly required in machining and assembly checks. Does the tool require batteries or electronics? No. The instrument is an analogue vernier caliper and operates without batteries, offering maintenance‑free measuring for routine use. What material is the caliper made from and how durable is the finish? The caliper is manufactured from stainless steel (INOX) with a matt chrome finish for enhanced corrosion resistance and long service life in workshop conditions. Is there a reference for thread sizes on the tool? A thread table is printed on the reverse of the caliper for quick reference during screw and thread inspections with the Pocket Caliper TOP 300 x 0.05 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Precision Pocket Caliper 0.05mm Parallax-Free, Three-Point Readings, Locking Screw, Monoblock, DIN 862, Plastic Case - Metav IndustryLine
Compact pocket form, parallax‑free scale and a secure locking screw combine to deliver reliable, repeatable readings for everyday workshop use; the matt‑chrome, stainless‑steel body ensures long service life and stable measuring. Order the caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Pocket caliper M201.107 – 0–300 mm, 0.05 mm resolution (Metav IndustryLine) The Pocket caliper M201.107 is a compact, parallax‑free analogue caliper for workshop and maintenance applications, designed for precise outside, inside, depth and step measurements up to 300 mm. Parallax‑free scale for reliable readings Locking screw and monoblock stability Stainless steel construction, matt chrome finish Four‑way measurement: inside/outside/depth/step Precision that speeds up inspection and reduces rework The compact design provides a dependable measuring solution with a 0–300 mm range and 0.05 mm reading increments, conforming to DIN 862 standards for mechanical calipers. The parallax‑free scale improves reading accuracy under workshop lighting and at different viewing angles, while the locking screw secures the slider for consistent repeat measurements. These characteristics reduce inspection time and the risk of rework by making initial readings more trustworthy; the short, stiff jaws typical of pocket formats maintain stability when measuring small parts or confined features. Robust build and handling for daily use Constructed from stainless steel with a matt‑chrome finish and a monoblock slider, the instrument resists corrosion and holds alignment during regular handling. The compact footprint and low weight make benchwork and mobile inspection straightforward, while the integrated depth gauge expands usability to bores and recesses. A thread chart printed on the reverse side supports quick reference for common fastener checks. Delivered in a protective case for transport and storage, the caliper remains ready for service when moved between workstations. Practical measuring features explained Four‑way measurement capability covers outside, inside, depth and step readings without accessory changes, streamlining everyday checks. The analogue nonius offers a tactile feel and immediate visual confirmation, suited to conventional workshop workflows where electronic integration is not required. Compliance with DIN 862 signals industrial suitability: readings at the stated 0.05 mm resolution meet typical machining and maintenance tolerances, making this caliper a pragmatic choice for metalworking and general engineering tasks. Contact Metav Werkzeuge for supply and application advice on the M201.107 pocket caliper or to arrange a technical consultation tailored to workshop needs. Technical data Article number: M201.107 GTIN: 4054469100548 Category: calipers Standard: DIN 862 Facts Measuring range: 0–300 mm Reading: 0.05 mm Type: analogue (nonius) Customs tariff number: 90173000 Special features Parallax‑free reading Locking screw (Feststellschraube) Monoblock slider Material: stainless steel (inox) Matt‑chrome finish Depth gauge included Thread chart on reverse side Delivered in a protective case Four‑way measurement: inside/outside/depth/step FAQ What measuring tasks is this caliper best suited for? The pocket caliper M201.107 is ideal for routine workshop checks, small‑part inspection and maintenance tasks where a 0–300 mm range and 0.05 mm resolution are appropriate. Does the instrument support inside and depth measurements? Yes. The design includes four‑way measurement functionality for inside, outside, depth and step readings, so the M201.107 covers these measurement types without additional attachments. Is the caliper corrosion resistant for use in mixed environments? The body is made from stainless steel with a matt‑chrome finish, providing good resistance to workshop humidity and light contamination. Does the caliper meet recognised standards for mechanical measuring tools? The instrument is produced to DIN 862 for mechanical calipers, offering the familiar accuracy class expected in industrial and maintenance environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35-300mm Internal Groove Caliper 0.05mm Reading Matt Chrome Inox, Supplied In Case - Metav IndustryLine
Robust measurement performance meets workshop practicality: the combination of a 35–300 mm measuring range, 0.05 mm vernier reading and a matt‑chrome stainless finish ensures reliable internal groove inspection and repeatable results. Order the internal groove caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Internal groove caliper M201.138 — Vernier 0.05 mm, 35–300 mm (Metav IndustryLine) The internal groove caliper M201.138 is a vernier measuring instrument designed for precise internal groove and slot measurement in general workshop and machine‑shop environments. Internal groove caliper 35–300 mm range Vernier reading 0.05 mm resolution Matt chrome finish on stainless steel Locking screw for repeatable positioning Supplied in protective case Precise internal measurements for standard workshop use This vernier instrument delivers a clear 0.05 mm reading via a classic vernier scale, making it suitable for routine control tasks where analogue robustness is preferred. Classified as a standard caliper (measuring range up to 300 mm), it balances reach and stiffness so that measurements of internal grooves, slots and narrow bores remain reproducible. The simple mechanical scale avoids battery dependencies while providing a dependable visual reference for production checks. Built to resist workshop wear and keep settings stable Constructed from stainless steel with a matt chrome surface, the instrument resists corrosion and abrasion in everyday shop conditions. A dedicated locking screw secures the sliding jaw at the measured position, supporting repeatable measurement cycles and easier transfer of values to inspection records. Delivery in a protective case simplifies storage and transport between workstations, keeping the caliper ready for frequent use without unnecessary downtime. Practical handling and measurement technique explained The vernier caliper uses its internal jaws to reach into grooves and narrow recesses; these jaws are shaped to engage groove bottoms and shoulder surfaces reliably. The analogue scale requires reading the vernier line against the main scale—an operation that, once familiar, provides fast and unambiguous results even for experienced operators. The mechanical design offers a tactile feel during measurement and a consistent feedback loop that supports quick quality decisions on the shop floor. A pragmatic choice for production and routine quality control Opting for this instrument supports efficient workflow: the combination of a widely used measuring range, clear resolution and durable finish reduces sources of rework and measurement interruption. For departments that prefer tried‑and‑tested analogue tools, the caliper provides a low‑complexity solution that integrates seamlessly into inspection routines and documentation practices, helping to maintain throughput without sacrificing measurement integrity. For procurement or technical clarification, contact Metav Werkzeuge GmbH in Emmerich — order the Metav IndustryLine internal groove caliper M201.138 or request application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.138 GTIN: 4054469100692 ECLASS: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Core specifications Measuring range: 35–300 mm Reading (vernier): 0.05 mm Accuracy: 0.15 mm Type: analogue vernier caliper Locking screw: yes Materials & features Material: stainless steel (inox) Finish: matt chrome Packaging: supplied in protective case Application: internal groove and slot measurement FAQ What measuring range does this caliper cover? The instrument measures from 35 to 300 mm and is intended for standard workshop tasks; the item is Metav IndustryLine caliper M201.138. What is the display resolution and scale type? This is an analogue vernier with a 0.05 mm reading; the mechanical scale provides a straightforward visual readout. Is the caliper suitable for regular shop‑floor use? Yes. The stainless steel construction with matt‑chrome finish and the locking screw make the caliper robust enough for routine production checks. Is a protective case included with the product? Yes. The caliper is supplied in a protective case for safe transport and storage between workstations. What accuracy can be expected from this vernier caliper? The specified accuracy is 0.15 mm, suitable for general inspection and workshop measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4-40mm Three-Point Precision Calliper Matt Chrome Stainless Steel 0.05mm Vernier, Supplied in Case - Metav IndustryLine
Compact, corrosion-resistant and optimised for micro bores: the matt-chrome, stainless steel 3-point caliper M201.130 combines a precise analogue vernier with a 4–40 mm measuring range and a 0.05 mm graduation for reliable repeatability. Order the 3-point caliper directly via Metav Werkzeuge or ask our consultants if needed. 3-point caliper M201.130 — analogue caliper, 4–40 mm, matt chrome stainless The 3-point caliper M201.130 is an analogue internal measuring instrument for precise inspection of small bores and fine mechanical components in workshops and toolrooms. Matt-chrome finish, corrosion-resistant stainless steel Measurement range 4–40 mm for micro bores Vernier scale with 0.05 mm graduation Delivered in protective case for transport Accurate internal measurement for micro components The three-jaw geometry provides a stable contact around a bore and reduces alignment error compared with two-point probes; this makes the instrument especially suited to small-diameter work where concentricity and repeatability matter. Classified in the micro range (4–40 mm), the device delivers an analogue 0.05 mm graduation on a traditional vernier scale, a level that corresponds to standard industrial tolerances. The design is therefore ideal for assembly checks, fit verification and simple quality control tasks where a mechanical reading is preferred over electronic displays. Durable finish and straightforward handling A matt chrome finish over stainless construction ensures long-term resistance to corrosion and light workshop wear while keeping reflective glare low during measurement. The analogue layout keeps maintenance straightforward: no batteries, no electronics to fault, and simple cleaning preserves accuracy. A protective transport case is supplied, securing the instrument during storage and transit and supporting routine workshop logistics without additional packaging. Workshop fit, classification and practical benefits Designed as a compact internal measuring tool, this caliper bridges hand measuring and bench metrology: it is easy to handle for repetitive checks and compact enough for tight workspaces. The vernier system supports quick readings and immediate decisions on pass/fail limits, providing a highly pragmatic solution for machining and inspection stations. Supplied by Metav IndustryLine, the instrument complements a broad workshop toolkit and fits well where robust, low-maintenance gauges are required. For reliable micro-bore measurement and workshop-ready precision, choose the Metav IndustryLine 3-point caliper and contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply Technical data Article number: M201.130 GTIN: 4054469100623 ECLASS: 21170329 Category: Messschieber Application: 3-point measurement Material: stainless steel (inox) Finish: matt chrome Type: analogue vernier caliper Delivered in protective case Core specifications Measurement range: 4–40 mm Resolution / graduation: 0.05 mm Tariff number: 90173000 Special features 3-point measuring jaws for internal diameters Analogue vernier reading Corrosion-resistant stainless construction Protective case for transport FAQ What measuring range does the caliper cover? The 3-point caliper M201.130 measures internal diameters from 4–40 mm and is classified for micro-range applications. How precise is the reading on this instrument? Readings are taken on an analogue vernier with a 0.05 mm graduation, providing standard industrial-level precision for workshop checks with the Metav IndustryLine caliper. Is the caliper suitable for internal diameter measurements of small bores? Yes, the three-jaw design is intended for internal diameter measurement and gives stable, repeatable contact around small bores. Does the instrument come with protective packaging? The caliper is supplied in a protective transport case to safeguard the instrument during storage and movement. Can the caliper be used in daily workshop inspection routines? The analogue vernier layout and robust stainless finish make this caliper well suited for regular inspection tasks and simple go/no-go checks within a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Insert Ø5 mm With M2.5 Thread For Dial Indicator Mounting - Metav IndustryLine
Take advantage of a compact, stable measuring solution that combines 50 mm reach with a slim Ø 5 mm tip and an M2.5 thread for secure dial gauge mounting; the result is fast installation and reliable repeatability. Order the measuring insert directly via Metav Werkzeuge or consult the specialists for compatibility and delivery. Measuring insert M240.207.A1 — dial gauge adaptor, 50 mm, Ø 5 mm A Measuring insert M240.207.A1 designed as a dial gauge adaptor for integration with caliper mounts 240.207.N–240.209.N, suited to precision inspection and workshop metrology 50 mm reach for controlled probe access Ø 5 mm tip for fine-dimension contact M2.5 thread for secure dial gauge attachment Stable reach for accurate contact measurement A compact probe with a measured 50 mm length gives a reliable extension for repetitive inspection tasks. The modest mass and form factor reduce unwanted deflection, so dimensional checks remain repeatable even when accessing narrow recesses. The slim Ø 5 mm tip provides a small contact area that supports localised probing without masking surrounding geometry, which is particularly useful in assembly and quality control where access is restricted. Secure fastening and straightforward compatibility The integrated M2.5 thread provides a standardised mechanical interface for dial gauge inserts and similar indicators, ensuring a secure connection to the host caliper assembly. Compatibility with caliper models 240.207.N–240.209.N simplifies parts logistics and reduces set-up time on the shop floor. This design emphasis on a standard thread and compact geometry supports efficient changeovers and lowers the risk of measurement error caused by loose or imprecise fittings. Designed for precision workflows and inspection stations Lightweight and purpose-built, the insert supports routine measurement cycles in production and inspection environments where dependability matters. The component’s dimensions and mechanical interface facilitate quick replacement and predictable behaviour in repetitive tasks, improving throughput in measurement routines. When used as part of a calibrated measuring chain, the insert contributes to a clear traceability path and dependable quality documentation. For precise dial gauge mounting and parts compatibility, request the Metav IndustryLine measuring insert M240.207.A1 via Metav Werkzeuge GmbH — contact info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and technical advice Technical data Article number: M240.207.A1 GTIN: 4054469151489 Manufacturer: Metav IndustryLine Weight: 0.3 kg Length: 50 mm Tariff number: 90178090 Core specifications Tip diameter: 5 mm Thread: M2.5 Length: 50 mm Weight: 0.3 kg eClass: 21170613 ETIM: EC002219 Special features Compatible with caliper mounts 240.207.N–240.209.N Intended as a dial gauge insert/adaptor Suited to precision inspection and workshop metrology Compact design for restricted-access measurements FAQ Is this insert compatible with standard dial gauges? The insert is supplied for use as a dial gauge adaptor and features an M2.5 thread to accept many standard gauge fittings; compatibility should be confirmed against the dial gauge spindle dimensions specified for M240.207.A1. Which caliper mounts does this part fit? This measuring insert is designed for use with caliper mounts 240.207.N to 240.209.N and provides a secure mechanical interface for dial gauge installation. What are the physical dimensions of the insert? The insert has a length of 50 mm and a tip diameter of 5 mm; weight is 0.3 kg, as specified for M240.207.A1. Can the insert be used for deep bore measurements? The 50 mm reach is intended for controlled access to confined features; for substantially deeper bores, combined extension strategies should be evaluated to maintain stiffness and measurement integrity. Does the insert include any calibration certificate? No calibration certificate is specified for this measuring insert in the product data; calibration status should be verified with the supplier prior to integration if traceable measurement results are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Brake Drum Caliper 150mm Jaws Stainless Steel For Inside And Outside Measurement, Supplied In Case - Metav IndustryLine
Take advantage of a large-range, corrosion‑resistant caliper that combines practical reach and robust vernier accuracy to keep workshop inspections efficient. The stainless steel construction and precise vernier graduations ensure reliable inside and outside measurements of brake drums and similar components; order directly via Metav Werkzeuge or contact our consultants for application advice. Brake-drum Caliper M201.185 (500×150 mm, stainless steel) — Metav IndustryLine analogue precision caliper for inside and outside measurement A Brake-drum Caliper M201.185 designed for measuring brake drums and large components with sturdy stainless steel construction and vernier accuracy for repeatable workshop control Stainless steel construction for corrosion resistance Measuring range: 0–500 mm external, 50–550 mm internal Vernier: 0.05 mm external, 0.1 mm internal resolution Locking screw for stable and repeatable readings Robust design for demanding workshop measurements The caliper's stainless steel body provides long-term resistance to workshop conditions while keeping the measuring surfaces stable. Built as an analogue vernier caliper, it delivers a reliable balance between mechanical durability and straightforward operation. The robust frame reduces flex over its 500 mm external span, making it suitable where repeatability across larger components is essential. The included locking screw secures the slider for consistent readings during transfer and comparison, which shortens inspection cycles and reduces rework. Precision where it matters: vernier layout and accuracy Equipped with a traditional vernier scale, the tool offers 0.05 mm resolution on external measurements and 0.1 mm resolution for internal measurements, matching common workshop tolerances. The stated nominal accuracy of ±0.15 mm corresponds to a level of performance appropriate for heavy‑duty measurements such as brake drums, housings and cast components where an analogue instrument is preferred. The vernier arrangement is easy to read after a short familiarisation, which supports faster throughput in repetitive quality checks. Practical range for larger components Classified at the threshold of the large‑range category, this caliper covers external measurements up to 500 mm and internal spans from 50 to 550 mm, bridging bench work and larger subassemblies. That reach makes it a pragmatic choice for vehicle service shops, maintenance departments and fixture checks where an extended jaw length (150 mm) is required to access deep bores or drum contours. The combination of reach and stiffness reduces the need for auxiliary gauges, simplifying measurement workflows. Workshop compatibility and everyday benefits As an analogue instrument, the caliper requires no batteries and offers immediate readiness for on‑the‑spot inspections. The stainless construction minimises corrosion risk, and the clear vernier graduations facilitate quick decisions at the bench. Together these attributes support a rational approach to quality control: faster inspections, fewer measurement steps and predictable results that integrate smoothly with existing test plans. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine Brake‑drum Caliper M201.185 into workshop workflows and to confirm availability from our Emmerich supply hub. Technical Data Article number: M201.185 GTIN: 4054469101002 eClass: 21170344 Customs tariff code: 90173000 Facts Measuring range external: 0–500 mm Measuring range internal: 50–550 mm Jaw length: 150 mm Vernier resolution: 0.05 mm (external), 0.1 mm (internal) Nominal accuracy: ±0.15 mm Analog instrument (vernier type) Special features Material: stainless steel (inox) Suitable for inside and outside measurement of brake drums and similar parts Locking screw for stable measurement transfer Designed for workshop and maintenance environments FAQ Is this caliper suitable for measuring brake drums and deep bores? Yes. The Brake‑drum Caliper M201.185 is designed for inside and outside measurement with a long jaw length and a measuring range that accommodates brake drums and comparable components. What resolution and accuracy can be expected from this analogue caliper? The instrument provides 0.05 mm resolution for external measurements and 0.1 mm resolution for internal measurements, with a nominal accuracy of ±0.15 mm, appropriate for heavy‑duty workshop checks. Does the caliper require batteries or electronic maintenance? No. Being an analogue vernier caliper, the Metav IndustryLine Brake‑drum Caliper M201.185 operates without batteries and is ready for immediate use after basic calibration verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Brake Drum Caliper 200mm Jaws Stainless Steel for Internal And External Measurement, 1/10mm Internal 1/20mm External, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction, clear vernier graduations for internal and external measurements, and a locking screw for reproducible results. Order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Brake Drum Caliper M201.186 — 500 mm range, stainless steel vernier A Metav IndustryLine Brake Drum Caliper M201.186 designed for accurate internal and external diameter measurement of brake drums and similar workshop components. 500 mm measuring range for large components Stainless steel construction resists corrosion Dual vernier for internal and external reading Reproducible precision for workshop routines This analogue vernier caliper combines a straightforward measuring principle with industrial robustness to support repetitive inspection tasks. The mechanical scale offers a clear dual reading—1/10 mm divisions for internal measurements and 1/20 mm divisions for external measurements—enabling fast comparability against tolerance limits. The specified accuracy of ±0.15 mm and the locking screw help to reduce operator variation and secure measurements while transferring parts or recording values, which in turn shortens inspection cycles and reduces rework. Range and handling tuned to brake-drum work With an external measuring capacity up to 500 mm and an internal measuring span listed as 50–550 mm, this caliper sits in the medium size class for workshop calipers, offering the best compromise between reach and stiffness for components such as brake drums, housings and medium-sized castings. The 200 mm jaw length provides stable contact surfaces for deeper grooves or recesses, so axial alignment is easier and measurement repeatability is improved compared with very short-jawed instruments. Durable materials and ergonomic operation Manufactured from stainless steel (inox), the instrument resists workshop grime and light corrosion, extending service life and reducing maintenance. The analogue design requires no batteries and is immediately serviceable at the bench. A robust frame and smooth sliding action, together with the locking screw, assist in single-handed operation and secure readings during transport. The overall concept is aimed at practical reliability rather than adding unnecessary electronic complexity, which benefits routine quality controls and maintenance checks. For tailored advice or to secure the M201.186 through Metav Werkzeuge — contact our consultants in Emmerich for fast, reliable supply and application guidance Technical Data SKU: M201.186 GTIN: 4054469101026 Tariff code: 90173000 Facts External measuring range: 0–500 mm Internal measuring range: 50–550 mm Jaw length: 200 mm Accuracy: ±0.15 mm Vernier divisions: 1/10 mm (internal), 1/20 mm (external) Special features Material: stainless steel (inox) Analog vernier caliper Locking screw for reproducible readings Suitable for brake drums and similar components Supplied in a protective case FAQ What measuring ranges does the caliper cover? The caliper covers an external range to 500 mm and an internal span of 50–550 mm, making it suitable for medium-sized components such as brake drums. How precise is the vernier reading on this instrument? The analogue vernier provides 1/10 mm divisions for internal measurements and 1/20 mm divisions for external measurements; the instrument's stated accuracy is ±0.15 mm. Is the caliper suitable for workshop use on brake drums? Yes, the M201.186 brake drum caliper is designed for workshop inspection of brake drums and similar parts, combining stainless steel durability with practical jaw geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Caliper Measuring Jaw Adapter For 5.5mm Jaw Thickness - Metav IndustryLine
Take advantage of a compact, purpose-built accessory that converts standard caliper jaws into a specialised measuring interface: the adapter accepts jaw thicknesses up to 5.5 mm, fits calipers with a measuring range up to 500 mm and mounts on a Ø5 mm fitting for secure attachment. Order the adapter directly via Metav Werkzeuge or consult our specialists for application advice. Caliper jaw adapter (for calipers up to 500 mm) — Metav IndustryLine, Ø5 mounting, 5.5 mm jaw capacity Caliper jaw adapter (for calipers up to 500 mm) is a compact attachment that converts standard caliper jaws into a dedicated measuring interface for medium-range workshop tasks, ideal where quick adaptation is required without changing instruments Fits calipers up to 500 mm Accepts jaw thickness up to 5.5 mm Ø5 mm mounting bore for secure fit Lightweight 50 g for minimal load Consistent precision for medium-range measuring tasks This accessory is engineered as a precision caliper adapter for calipers with a maximum measuring range of 500 mm, placing it in the workshop's medium‑range category. By allowing a defined contact geometry on existing jaws, the adapter reduces variability introduced by improvised fixtures and supports repeatable measurements across production batches. The compact construction and 50 g mass keep the additional load negligible, preserving the instrument's handling and helping to avoid bending or offset errors that can occur with heavier retrofits. Straightforward compatibility and quick fitting The adapter secures onto the caliper jaw via a Ø5 mm mounting interface, a common workshop standard that ensures a tight, concentric fit on compatible jaws. Acceptance of jaw thicknesses up to 5.5 mm means the part suits many standard and robust jaw designs found in industrial and bench calipers. Its role as an attachment for measuring jaws simplifies conversion of an existing analogue instrument into a specialised gauge without the need for new callipers, saving procurement time and reducing downtime in the measuring process. Practical benefits for everyday workshop use Designed as a pragmatic accessory rather than a complete instrument, the adapter enhances workflow by enabling tailored contact forms for specific measurement tasks — for example, reaching into tight grooves or creating a repeatable stop for stepped measurements. The solution supports the shop-floor emphasis on efficiency: one adapted caliper can replace multiple specialised tools, lowering equipment complexity. Traceability and repeatability are improved when the same adapter is used consistently across checks, which is particularly valuable for batch control and fixture set‑ups. Built for durability and predictable handling Although compact, the adapter is manufactured to withstand routine workshop use while maintaining alignment and seat integrity on the caliper jaw. Its low mass minimises influence on the caliper's dynamics during measurement, and the defined mounting geometry reduces play once fitted. As an accessory that complements existing metrology equipment, it contributes to a more organised measurement routine and helps technicians focus on result quality rather than frequent tool changes. Contact Metav Werkzeuge for tailored advice and to obtain the Metav IndustryLine caliper jaw adapter (SKU M240.312) from our Emmerich quality centre Technical data SKU: M240.312 GTIN: 4054469159515 ECLASS: 21131720 Tariff number: 90178090 Weight: 0.05 kg Facts Measuring range compatibility: up to 500 mm Maximum jaw thickness accepted: 5.5 mm Mounting bore: Ø5 mm Mass: 0.05 kg (50 g) Special features Attachment for caliper measuring jaws Suited to analogue calipers Designed for medium-range calipers (up to 500 mm) Compact, lightweight accessory Enables defined contact geometry for repeatable measures FAQ Which calipers are compatible with this adapter? The adapter is compatible with calipers that accept an accessory on a Ø5 mm mounting and have jaw thicknesses up to 5.5 mm; it is intended for calipers with a measuring range up to 500 mm and is supplied as the Metav IndustryLine caliper jaw adapter (SKU M240.312). Can the adapter be used on digital calipers as well as analogue ones? Yes; while the design is intended for analogue calipers, the Metav IndustryLine adapter can be fitted to many digital models provided the jaw geometry and a Ø5 mm mounting are available. Does the adapter affect measurement accuracy? When fitted correctly, the adapter provides a consistent contact geometry that improves repeatability; the low mass (approximately 50 g) minimises influence on the caliper's handling and thus limits additional measurement error. What workshop tasks benefit most from this accessory? The adapter is particularly useful for stepped measurements, internal features accessed via modified jaws and repeat checks where a defined, repeatable contact is required; it adapts standard calipers for medium-range metrology tasks without needing a dedicated gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Brake Disc Gauge 80mm Jaw Matt Chrome Nonius 0.1mm, Stainless Steel - Metav IndustryLine
Take advantage of a compact, purpose-built inspection tool that combines stainless-steel durability, a 0–50 mm measuring range and an 80 mm jaw length for reliable brake-disc thickness checks; order directly via Metav Werkzeuge or consult our specialists for application advice. M201.182 Brake-disc Gauge — Analogue caliper with vernier 0.1 mm (Metav IndustryLine) The M201.182 Brake-disc Gauge is a compact analogue caliper engineered for quick, repeatable thickness checks on rotors and brake discs in workshop and maintenance settings Stainless-steel, matt chrome finish Vernier scale 0.1 mm resolution 0–50 mm range with 80 mm jaws Compact precision for routine inspection Built for compact, repeatable measurements, this analogue caliper delivers straightforward vernier reading at 0.1 mm and an indicated accuracy of 0.2 mm, making it suited to visual inspection and basic quality-control tasks. The tool’s stainless-steel construction and matt chrome finish resist workshop wear and light corrosion, so measurement geometry remains stable over frequent use. Classified within the micro-range (measuring capacity under 100 mm), it combines reach and stiffness appropriate for precise thickness checks without excess bulk, helping maintain production flow and reduce rework. Robust construction that supports uptime The caliper’s stainless build and solid jaw geometry provide tactile stability during clamping and reading, reducing operator-induced variation. With 80 mm jaws, it can bridge typical rotor profiles while keeping deformation minimal; this benefits repeatability on stepped surfaces. The analogue vernier system avoids battery dependence and simplifies field inspections, delivering a low-maintenance solution for service bays and maintenance shops. The result is a durable measuring instrument that supports continuous workshop operation with minimal downtime for upkeep. Ergonomic handling for faster checks Designed for rapid use, the tool’s compact frame and clear vernier layout speed up routine checks and assembly inspections. The non-slip finish and balanced jaw length permit confident one-handed control for fast pass/fail assessment during maintenance rounds. Supplied in a protective case for transport, it is ready for bench or mobile workshops and easy to store between shifts. For teams that prioritise straightforward, dependable instruments, this caliper reduces complexity while keeping measurement practice consistent. For practical, workshop-ready measuring tools and ordering support for the M201.182 Brake-disc Gauge, contact Metav Werkzeuge in Emmerich for tailored advice and procurement assistance Technical data Article number: M201.182 GTIN: 4054469100975 Material: stainless steel (INOX) Measuring range: 0–50 mm Jaw length: 80 mm Scale type: vernier (Nonius) 0.1 mm Type: analogue caliper Finish: matt chrome Tariff number: 90173000 Category: caliper / Messschieber eClass: 21170344 Packaging: supplied in protective case Facts Reading / resolution: 0.1 mm Indicated accuracy: 0.2 mm Measuring range min: 0 mm Measuring range max: 50 mm Jaw length: 80 mm Special features Analogue vernier scale Micro-range caliper (compact, high stiffness) Corrosion-resistant stainless-steel construction Matt chrome surface treatment Supplied in a transport case Suitable for routine brake-disc thickness checks FAQ Is this caliper suitable for measuring brake-disc thickness? Yes. The M201.182 brake-disc gauge is designed for rotor and disc thickness inspections within a 0–50 mm range and is suitable for routine workshop checks. What resolution and accuracy does the instrument offer? The instrument uses a vernier scale with a resolution of 0.1 mm and an indicated accuracy of 0.2 mm, providing reliable readings for standard maintenance and inspection tasks. Is the measuring tool corrosion-resistant? The caliper is manufactured from stainless steel with a matt chrome finish, offering enhanced resistance to workshop environments and extended service life. Does the product include a case for transport? Yes. The gauge is supplied in a protective case suitable for transport and storage, ensuring the instrument remains protected between uses. Can this analogue caliper replace digital gauges in a workshop? For basic thickness checks and quick pass/fail inspections, the M201.182 analogue gauge provides a low-maintenance, battery-free alternative that is robust and simple to use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Brake Disc Gauge Three-Point, Stainless Steel Matt Chrome Vernier 0.1mm, Supplied in Case - Metav IndustryLine
Benefit from a robust stainless-steel build, a 0–50 mm measuring range with Vernier 0.1 mm reading, and a protective transport case for secure handling. Combine reliable mechanical measuring performance and workshop-ready durability for consistent inspection results. Order the brake-disc gauge directly via Metav Werkzeuge or consult our specialists for technical advice. M201.180 Brake-disc gauge (stainless steel, Vernier 0.1 mm) — Metav IndustryLine The M201.180 Brake-disc gauge is a compact mechanical caliper designed for quick thickness and run‑out checks on small brake discs and rotors in workshop and inspection environments. Robust stainless steel construction Vernier scale, 0.1 mm resolution Measuring range 0–50 mm Delivered in protective transport case Reliable readings for routine inspection tasks The caliper delivers a practical combination of precision and simplicity: a Vernier scale with 0.1 mm reading ensures repeatable measurements for everyday quality checks, while an industrial accuracy class of 0.2 mm provides a trustworthy error margin for workshop inspection. Its compact measuring span of 0–50 mm makes it especially suitable where short-range checks are frequent, for example assessing disc thickness or checking minimal run‑out on rotors. The mechanical design avoids electronic dependencies and is therefore resilient to harsh shop-floor conditions. Built to withstand workshop use and protect the instrument Constructed from stainless steel (INOX) with a matte chrome finish, the gauge resists corrosion and maintains dimensional stability under regular handling. A 50 mm jaw length offers sufficient contact area for disc edge and surface measurements while keeping the tool manoeuvrable in confined spaces. Delivery in a protective transport case reduces the risk of damage during storage or transit and keeps the caliper ready for immediate use. These characteristics combine to reduce downtime and help maintain measurement reliability across repeated checks. Practical tool for fast decision-making on the shop floor As an analog mechanical Vernier caliper, this inspection gauge provides tactile feedback and an intuitive readout that experienced technicians value for quick assessments. The instrument is optimised for brake-disc applications and similar rotating components where fast pass/fail decisions are needed. Its straightforward operation supports efficient process control and helps integrate measurements into established workshop routines without additional training or software. For teams prioritising robust, no-frills reliability, this gauge offers a dependable means to verify component condition during maintenance and assembly. For workshop-ready precision from Metav IndustryLine, request technical guidance or arrange delivery from Metav Werkzeuge at our Emmerich location via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.180 GTIN: 4054469100944 eClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–50 mm Resolution / reading: 0.1 mm Accuracy: 0.2 mm Jaw length: 50 mm Special features Material: stainless steel (INOX) Finish: matte chrome-plated Scale type: Vernier (nonius) Delivery: protective transport case Type: analog mechanical caliper FAQ What measurements can this gauge perform? The M201.180 brake-disc gauge performs external thickness checks and run‑out assessments across a 0–50 mm range using a Vernier scale for 0.1 mm reading. Is the instrument suitable for workshop use on vehicle brake discs? Yes, the caliper is designed for routine workshop inspections and is robust enough for repeated use on small brake discs and similar components. How is the gauge delivered to protect it during transport? Delivery includes a protective transport case to prevent damage and to keep the instrument ready for immediate use. Does the instrument require batteries or calibration equipment? The gauge is an analogue mechanical Vernier caliper and does not require batteries; calibration information is available on request from Metav Werkzeuge. Can the caliper measure internal features as well as external thickness? The mechanical design allows standard external and internal checks appropriate to the specified measuring range for inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Brake Drum Caliper 200mm Jaws Stainless Steel Three-Point Readings, Supplied in Case - Metav IndustryLine
Combine robust stainless-steel construction with a wide 600 mm external range and a precise analogue nonius for repeatable brake-drum and large-component checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Brake Drum Caliper M201.187 — 600 mm external range, INOX construction (Metav IndustryLine) The Brake Drum Caliper M201.187 is an analogue, large-format caliper engineered for internal and external measurement of brake drums and other wide components in workshop and industrial environments. Stainless-steel (INOX) construction 600 mm external measuring range 200 mm jaw length for deep grip Analogue nonius: 1/10 mm internal, 1/20 mm external Accurate large-range measuring where it matters The caliper is designed for tasks that require both reach and repeatability: the 600 mm external span and internal capability from 50–650 mm cover typical brake drums and comparable large parts. The analogue nonius provides clear graduations—1/10 mm for internal and 1/20 mm for external readings—permitting reliable manual measurement without dependency on electronics. This configuration reduces downtime in environments where ruggedness and simplicity are priorities and supports a steady production or maintenance flow through consistent, verifiable readings. Readings made straightforward with a familiar nonius An analogue scale remains a robust choice in busy workshops: the nonius layout on this caliper gives fast, intuitive readings and resists the environmental sensitivities of electronic devices. The separate resolutions for internal and external measurements allow technicians to select the most appropriate scale for the task, while the stated accuracy of 0.2 mm reflects the instrument’s practical tolerance for large-format checking. For users less familiar with nonius reading, the scale can be taught quickly and incorporated into standard inspection routines, improving throughput and reducing measurement uncertainty. Built for handling large components and secure clamping Constructed from stainless steel (INOX), the caliper resists corrosion in workshop atmospheres and delivers stable contact on wide surfaces. The 200 mm jaw length gives additional reach for deep bores and drum contours, while the integrated locking screw secures the slide for transfer measurements and datum retention. These features combine to reduce setup repetition and support reproducible checks on assemblies, fixtures or service items where firm, repeatable positioning matters most. Practical workshop integration and transport The instrument is optimised for heavy-duty workshop routines: the long jaw geometry and robust slide provide the stiffness needed for consistent results over the entire measuring length. Delivery includes a protective case to simplify storage and safe transport between the inspection bench and service bay. Classified as a large-range instrument (500–1,000 mm), it fills the niche between standard workshop calipers and specialised long-stroke gauges, making it a pragmatic choice for maintenance shops, inspection stations and toolrooms aiming to consolidate measuring capability. Contact Metav Werkzeuge for tailored advice on specifying the Metav IndustryLine Brake Drum Caliper M201.187 and to arrange procurement or technical clarification—phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M201.187 GTIN: 4054469101033 eCl@ss: 21170344 Tariff number: 90173000 Core specifications External measuring range: 600 mm Internal measuring range: 50–650 mm Jaw length: 200 mm Accuracy: 0.2 mm Scale type: Analogue nonius (internal 1/10 mm; external 1/20 mm) Features and materials Material: stainless steel (INOX) Locking screw: yes Delivery: supplied in protective case Category: caliper, large-range instrument Brand: Metav IndustryLine FAQ How large a component can be measured with this caliper? The Brake Drum Caliper M201.187 accommodates external measurements up to 600 mm and internal checks from 50–650 mm, making it suitable for most brake drums and similarly sized parts. What reading resolution does the instrument provide? The analogue nonius delivers 1/10 mm resolution for internal measurements and 1/20 mm for external measurements on the Metav IndustryLine Brake Drum Caliper M201.187. Is the caliper suitable for workshop environments? Yes. The caliper’s stainless-steel construction, robust slide and locking screw are designed for regular workshop use and transport in the supplied protective case. How repeatable are measurements with this caliper? With its large-format design and secure clamping, the instrument offers stable repeatability for heavy-duty checks; the stated accuracy is 0.2 mm for typical workshop applications. Which applications is this caliper intended for? The instrument is intended for brake-drum inspection, service measurements and large-component checks in maintenance, inspection and manufacturing environments; the long jaw and extended internal range support a wide variety of tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm 2mm Tip Measuring Insert R0.5 x 2 x 40mm For Depth Measurements - Metav IndustryLine
Taking advantage of a precision R0.5 tip and a rigid 70 mm shank, this measuring insert provides repeatable contact in deep or recessed measurement points while remaining compact and easy to mount. Order the measuring insert directly via Metav Werkzeuge or consult Metav's specialists for application advice. Measuring insert with tip for caliper adapter – R0.5 × 2 × 40 mm, 70 mm shank (Metav IndustryLine) The measuring insert combines a fine rounded tip geometry with a 70 mm mounting shank for accurate access to deep features and a stable hold in caliper adapters. Fine rounded tip R0.5 for precise contact 70 mm shank for stable mounting Compatible with caliper adapters Suited for recessed and deep-point measurement Accuracy where access is restricted The finely formed R0.5 tip gives a small, defined contact area that reduces positional ambiguity when probing narrow bores, steps or recesses. By concentrating contact force through a small radius, the probe minimises lateral play and improves repeatability compared with blunt probes. The geometry labelled R0.5 × 2 × 40 mm indicates a tip radius of 0.5 mm with a shaft section suitable for confined spaces, making the insert particularly useful when standard jaws cannot reach. This results in faster inspection cycles and fewer rejected parts due to measurement uncertainty. Reliable mounting and workshop compatibility A 70 mm shank and Ø5 mounting interface ensure the insert seats securely in commercially available caliper adapters and fixtures. The compact mass (approx. 0.05 kg) keeps the centre of gravity close to the adapter, reducing vibration and lever effects during manual measuring operations. As an accessory for analogue calipers, the probe integrates without electronics or data output, preserving the simplicity of traditional measuring workflows while extending the application range of existing tools. The robust design supports frequent in‑shop use and straightforward replacement when wear occurs. Practical benefits for quality control and inspection Designed as a practical metrology accessory, the insert shortens set‑up time for hard‑to‑reach checks and reduces the need for special fixturing. The product is categorised as measurement accessory and is intended to complement standard caliper equipment, improving the handling of recessed surfaces without altering the primary instrument. For specific measurement tasks or compatibility checks with a particular caliper adapter, Metav IndustryLine technical staff can provide guidance on fit and suitability to ensure the insert meets inspection requirements. Contact Metav Werkzeuge today to confirm adapter compatibility and arrange supply from Emmerich for prompt delivery and expert advice Technical data Article number: M240.321 GTIN: 4054469159546 Category: Accessory (measuring devices) Type: Analogue measuring insert Core measurements Shank length: 70 mm Mounting diameter: Ø5 mm Tip geometry: R0.5 × 2 × 40 mm Weight: 0.05 kg Customs tariff: 90178090 Design and features Intended use: Deep/recessed point measurement Compatibility: Caliper adapters (analogue) Construction: Probe tip and shaft for adapter mounting Delivery form: Single insert, accessory item FAQ What is the intended use of this insert? The measuring insert is intended for deep or recessed point measurements where standard caliper jaws cannot reach; it fits into caliper adapters to extend measurement capability. Which calipers or adapters are compatible with the insert? Compatibility depends on the adapter's mounting interface; the insert uses a Ø5 mm shank and is suitable for common caliper adapters designed to accept this diameter. Is the tip suitable for contact with soft surfaces? The R0.5 rounded geometry is small and precise; it reduces indentation risk compared with sharper probes but care is advised on very soft materials to avoid surface marking. Can the insert be used with digital calipers? The insert is a mechanical accessory; it can be used with calipers that accept the Ø5 shank, including digital models that have suitable adapters, but the insert itself provides no electronic output. How does the insert affect measurement repeatability? By providing a defined contact radius and a stable 70 mm shank, the probe improves positional consistency for recessed features, supporting more repeatable results in routine inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Reliable vernier calipers for precision workshop measurement
Vernier calipers, also described as analog calipers, are mechanical measuring instruments that use a vernier scale to provide exact readings without any power source. Built from hardened stainless steel and often finished with a matt-chromed scale for glare-free reading, these tools deliver long service life and stable results even in demanding workshop environments.
How they work and where they bring value
The vernier scale enables precise readings for outside, inside, depth and step measurements by aligning scale markings to the reference. Typical accuracies are 0.02 mm or 0.05 mm, depending on the model, which makes vernier calipers suitable for industrial manufacturing, metalworking and quality assurance tasks where consistent repeatability and immediate availability are essential. Their purely mechanical design means they are battery-independent and unaffected by software issues, so they remain ready to use in dusty, oily or moist conditions. Locking options such as a thumb clamp or locking screw help maintain set measurements during inspection or transfer.
Practical advantages for everyday production
- Reduced downtime: ready to use at all times because they are battery-independent.
- Durable construction: hardened stainless steel resists wear and distortion for consistent results.
- Precise measuring: vernier readable to 0.02 mm or 0.05 mm, suitable for tight tolerances.
- Robust in harsh conditions: insensitive to dirt and easy to clean and maintain.
- Versatile measurement: supports outside, inside, depth and step measurements with stable fixation options.
Why choose Metav as your precision partner
Metav combines decades of expertise with a comprehensive B2B portfolio, offering a quality-filtered selection from its Emmerich hub. With more than 48,000 customers and a stock of over 250,000 products, Metav positions itself as a reliable partner for workshops and production halls that require consistent measurement quality and dependable supply. The Metav approach democratises precision: professional measuring tools are made accessible without compromising on durability or accuracy.
Core takeaway
Vernier calipers provide a simple, robust and highly accurate solution for mechanical measurement needs, offering immediate operation and long-term stability in rough workshop conditions.
FAQ
What measurement tasks can vernier calipers perform?
Vernier calipers cover outside, inside, depth and step measurements with a single tool; their vernier scale allows precise manual reading for each of these measurement types.
How does the accuracy of vernier calipers compare to digital calipers?
Vernier calipers commonly achieve 0.02 mm or 0.05 mm accuracy. While digital calipers display readings directly, vernier calipers match typical workshop tolerances and offer the advantage of being fully independent from batteries or electronics.
How should vernier calipers be maintained to ensure long service life?
Regular cleaning to remove chips and grime, light lubrication of the sliding surfaces, and storing the instrument in a protective case will preserve accuracy and prolong the life of the caliper.
Are vernier calipers suitable for use in harsh workshop environments?
Yes. Robust models made from hardened stainless steel and with matt finishes remain usable in dusty or oily conditions and are less sensitive to environmental factors than electronic alternatives.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com