was pruft ein gewindelehrdorn?

Take advantage of a durable inspection solution that combines hardened steel construction, DIN 7162 conformity and a built‑in wear allowance on the good side for predictable lifetime performance; order the Filetta limit gauge pin directly via Metav Werkzeuge or contact our consultants for application guidance. Limit gauge pin MS911.175 — hardened steel, DIN 7162 by Filetta The limit gauge pin is a precision plug gauge designed for fast verification of hole diameters and dimensional conformity in production and inspection environments. Hardened steel for durability Conforms to DIN 7162 standard Nominal 13 mm gauge pin Wear allowance on the good side Fast, reliable checks for hole diameters Limit gauge pins serve as a compact and effective tool for rapid go/no‑go assessment of bore diameters and fits. The MS911.175 from Filetta allows straightforward comparison against tolerance limits, reducing the time spent on intricate measurements and lowering the risk of finishing parts that fail inspection. By applying a simple pass/fail principle, this type of gauge pin supports continuous quality control and streamlines in‑process checks, which in turn improves throughput and reduces rework rates on the shop floor. Robust construction with predictable wear behaviour Manufactured from hardened steel, the pin provides a resistant contact surface that tolerates repeated use in production environments. The specified wear allowance on the good side means that the design accounts for gradual surface loss without compromising the verification function; users gain a longer useful service life and more predictable maintenance intervals. This wear concept avoids sudden losses of conformity and simplifies decisions about replacement or recalibration, delivering tangible savings over the component lifecycle. Standards compliance for traceable inspection routines Conformity to DIN 7162 ensures that the gauge pin integrates with existing metrology routines and adheres to recognised dimensioning rules, facilitating consistent documentation and auditability. The simple form factor makes the component easy to store alongside other inspection tools and easy to use during incoming inspections or final part control. With a clear identification such as MS911.175 and manufacturer provenance, the pin is suited for repeatable batch checks and supports a traceable quality management workflow. For precise bore verification from Filetta, contact Metav Werkzeuge for ordering and tailored application advice — Metav Werkzeuge GmbH is available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to support selection and delivery. Technical data Article number: MS911.175 Manufacturer: Filetta Material: hardened steel Size: 13 mm Standard: DIN 7162 Facts Nominal size: 13 mm Special features Wear allowance on the good side Limit/plug gauge function for go/no‑go checks Category: gauge pins / plug gauges Intended for bore diameter verification FAQ What is the primary use of this limit gauge pin? The limit gauge pin MS911.175 by Filetta is intended for quick go/no‑go checks of hole diameters and basic conformity assessments in production and inspection workflows. Which material is the gauge pin made from? The Filetta gauge pin is made from hardened steel, chosen to provide wear resistance and a stable contact surface for repeated inspections. Does this gauge pin conform to recognised standards? Yes, the component conforms to DIN 7162, which supports consistent dimensional control and integration into documented inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Benefit from the combination of hardened steel construction and conformity to DIN 7162 for repeatable internal diameter checks; the 15 mm nominal size offers a direct fit for standard bores. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for application advice. Limit plug gauge – 15 mm, hardened steel (Filetta) Limit plug gauge for quick go/no-go verification of internal diameters in production and inspection Hardened steel construction Compliant with DIN 7162 standard 15 mm nominal diameter gauge Wear allowance on master side Precision inspection where it matters The limit plug gauge is designed for fast and reliable verification of internal bores in routine quality checks. Manufactured from hardened steel, the gauge offers mechanical resilience that reduces wear and maintains form under repeated use. Conformity with DIN 7162 ensures that the gauge fits established acceptance procedures and inspection protocols, simplifying integration into existing quality workflows. As a result, production lines gain a compact, low-effort control tool that supports consistent pass/fail decisions. Durability and traceable performance A clear technical advantage of this gauge is the incorporated wear allowance on the master side, which prolongs usable life and offers predictable wear behaviour. The material choice—hardened steel—provides resistance to deformation and abrasion, reducing dimensional drift during frequent checks. For workshops and inspection rooms that require robust tools rather than disposable checking aids, this construction translates into fewer replacements and stable measurement outcomes over time, supporting reliable component acceptance. Simple handling for reliable results The gauge’s nominal 15 mm size and compact form factor make it suitable for rapid in-process checks and bench inspection tasks in metalworking and assembly. As a limit gauge, it provides unambiguous go/no-go feedback without needing additional measurement devices, speeding up throughput while keeping control simple. The Filetta item (Article number MS911.177) is particularly suited to operators who prioritise straightforward inspection methods and durable tooling that aligns with recognised standards. For reliable acceptance testing and long-term workshop use, request the Filetta limit plug gauge from Metav Werkzeuge—technical advice and supply are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: MS911.177 Name: Limit plug gauge Brand: Filetta Facts Diameter: 15 mm Standard: DIN 7162 Special features Material: hardened steel Application: internal diameter verification (plug gauge) Special feature: wear allowance on master side Category: Gauges (Measuring instruments > Gauges) FAQ What is the intended use of this limit plug gauge? The limit plug gauge is intended for go/no-go checks of internal diameters in production and inspection; the Filetta gauge MS911.177 verifies whether bores meet the specified acceptance limits. Is the gauge suitable for continuous shop-floor use? Yes, the hardened steel construction of the Filetta limit plug gauge ensures robustness for frequent shop-floor inspections and routine quality control. Which standard does the gauge conform to? The gauge conforms to DIN 7162, meaning it fits standard inspection routines and documented acceptance criteria for plug gauges. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of DIN 7162 conformity, hardened steel construction and the integrated wear allowance on the go side for dependable bore verification. Order this limit plug gauge directly via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge G7 – 20 mm, hardened steel (DIN 7162) by Filetta A limit plug gauge G7 designed for rapid go/no-go checks of cylindrical bores in production and inspection environments Hardened steel for long service life Manufactured to DIN 7162 standard Wear allowance on the go side Suitable for bore verification and QC Reliable measurements through recognised standards The gauge is manufactured to DIN 7162, which ensures consistent dimensions and interchangeability across inspection routines. For a nominal size of 20 mm, the plug gauge provides an immediate go/no-go decision, eliminating lengthy measurement evaluation processes. This standard-led approach supports efficient quality control, reduces scrap rates and shortens inspection cycles by delivering clear, repeatable outcomes at every station. Durable construction that reduces downtime Made from hardened steel, the instrument tolerates repeated use on the shop floor while maintaining dimensional stability. The incorporated wear allowance on the go side compensates for gradual material loss during routine checking, extending the service life before any rework or replacement becomes necessary. This pragmatic design reduces unplanned stoppages and lowers total cost of ownership by keeping maintenance intervals predictable. Practical integration for workshop and production use Sized for common bore checks, the plug gauge is ideal for quick verification during assembly, final inspection or incoming goods control. Its straightforward go/no-go functionality accelerates throughput without requiring complex measuring equipment or extensive operator training. The robust design and adherence to DIN 7162 make it suitable for use in machine shops, tool rooms and quality laboratories where rapid, trustworthy pass/fail decisions are required. Reference: model MS911.182 for ordering and stock enquiries. Contact Metav Werkzeuge for expert advice on integrating Filetta limit plug gauges (DIN 7162) into existing inspection routines and to secure reliable supply from our Emmerich warehouse Technical Data Article number: MS911.182 Material: hardened steel Standard: DIN 7162 Size: 20 mm Facts Diameter: 20 mm Special features Wear allowance on the go side Designed for go/no-go checks Robust hardened-steel construction FAQ What is the primary use of this limit plug gauge? This limit plug gauge is intended for fast go/no-go verification of cylindrical bores, providing a clear pass/fail result for production and inspection tasks. What material is the gauge made from and why does it matter? The gauge is produced from hardened steel, which ensures wear resistance and dimensional stability under frequent use, supporting reliable long-term measurements. Which standard does the product comply with? Manufactured to DIN 7162, the gauge meets recognised dimensional and manufacturing criteria for plug gauges used in industrial quality control. How does the wear allowance affect inspection intervals? The wear allowance on the go side compensates for gradual abrasion, extending useful life and allowing longer intervals between gauge replacement or rework; the item is listed as MS911.182 for ordering and inventory reference. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

The combination of hardened steel construction, conformity with DIN 7162, and a clearly defined wear allowance on the good side ensures reliable, repeatable go/no-go verification and long service life; order this gauge pin directly via Metav Werkzeuge or consult the Metav team for application advice. Limit gauge pin G7, 5 mm — Filetta Limit gauge pin for precision go/no-go checks and wear assessment in workshop and inspection environments. Hardened steel construction Conforms to DIN 7162 Wear allowance marked on good side Consistent pass/fail inspection for production routines The robust hardened steel body provides a stable reference surface that resists deformation under repeated use, supporting repeatable inspection results when used for go/no-go checks. Conformity with DIN 7162 gives a recognised benchmark for dimensional behaviour and interchangeability, so inspection processes can be standardised across machines and shifts. This reliability reduces rework, streamlines quality control and shortens inspection cycles in a busy workshop environment. Visible wear allowance aids maintenance planning A clearly indicated wear allowance on the good side makes it straightforward to monitor gauge condition and schedule replacements before limits are exceeded. The marked allowance functions as an operational guide for maintenance teams and enables conservative assessment of gauge life without complex measurement procedures. This feature supports predictable tool management, helping to avoid unexpected inspection failures and maintain traceable measurement practice. Compact form for fixtures and tight spaces With a nominal size of 5 mm, the pin is suited to tight-fixture applications and small-bore verification tasks common in jigs and measuring arrangements. The compact diameter enables use as a precision locating element or measuring pin where access is limited, while the hardened finish sustains surface integrity under frequent contact. As a limit gauge pin, it delivers a focused solution for dimensional control of small components and fit checks within assemblies. For precision go/no-go control rely on Filetta quality—contact Metav Werkzeuge for availability, technical advice and secure delivery to your workshop Technical data Article number: MS911.166 Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Measurements Nominal size: 5 mm Special features Wear allowance on the good side Category: measuring pins FAQ What is the intended use of this limit gauge pin? The limit gauge pin is designed for go/no-go verification and dimensional checks in workshop metrology; Filetta manufacture it to serve as a precise reference pin for small-bore and fit inspections. How does the wear allowance improve gauge management? A marked wear allowance on the good side provides a visual threshold for service life; when the allowance is reached the pin should be replaced to preserve measurement integrity. Is the product compliant with any standards? Yes, the pin complies with DIN 7162, ensuring standardised dimensional characteristics suitable for industrial inspection routines. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of a hardened steel construction and compliance with DIN 7162 to secure reliable go/no-go checks and predictable tool life; the integrated wear allowance on the datum face ensures continued conformity during repetitive use — order the gauge via Metav Werkzeuge or contact our consultants for application advice. Limit plug gauge G7, Ø 8 mm — hardened steel, DIN 7162 The Limit plug gauge G7 is a hardened-steel checking pin designed for fast dimensional inspections of holes and bores in production and inspection environments, conforming to DIN 7162 for consistent limit testing. Hardened steel construction Complies with DIN 7162 tolerance standard G7 limit fit for quick go/no-go testing Wear allowance on datum face Precise limit testing for production control The gauge provides a simple, repeatable method for pass/fail acceptance of bores, reducing measurement time on the shop floor. Built to the DIN 7162 guideline and marked for a G7 fit, the checking pin delivers clear go/no-go decisions that streamline quality routines. Relying on a fixed limit geometry removes interpretation variability and supports faster throughput in batch checks, while the compact design suits manual handling at inspection benches or assembly stations. Robust construction that withstands routine use Made from hardened steel, the mandrel offers resistance to wear and deformation under repeated contact. The incorporated wear allowance on the datum face compensates for gradual material loss, extending usable life and maintaining conformity between inspections. This durability translates into less downtime for replacements and a lower total cost of ownership compared with softer or plated designs, especially where regular mechanical gauging is part of the process. Traceable specification and simple integration into QC workflows Identified as MS911.170 and produced by Filetta, the gauge is straightforward to document within inspection plans and work instructions. The uncomplicated go/no-go principle requires no electrical hookup or data output, so the tool integrates seamlessly into manual or semi-automated checks. The combination of standardised tolerance adherence and a rugged profile supports clear process control and easier training of operators, which benefits both small workshops and larger production environments. Contact Metav Werkzeuge in Emmerich for application guidance and to source the Filetta limit plug gauge MS911.170 for your quality-control needs Technical Data Article number: MS911.170 Name: Limit plug gauge G7 Manufacturer: Filetta Standard: DIN 7162 Facts Nominal size: 8 mm Fit/tolerance: G7 Special features Material: hardened steel Wear allowance on datum face Application: go/no-go checking of holes and bores FAQ What type of inspection is this gauge intended for? The limit plug gauge is intended for quick go/no-go acceptance tests of bores and holes, enabling clear pass/fail checks during incoming inspection or in-process control with the Filetta MS911.170. Is the gauge suitable for continuous production use? Yes, the hardened steel construction and the wear allowance on the datum face make the gauge suitable for repetitive use in production environments where frequent verification of bore conformity is required. Does the gauge conform to a recognised standard? The limit plug gauge is manufactured to the requirements of DIN 7162, ensuring compatibility with common metrology practices and documentation in quality systems. How is the gauge identified within inspection documentation? The tool should be recorded as Filetta MS911.170, described as a G7 limit plug gauge, 8 mm, which simplifies traceability in inspection plans and process control records. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of precise, rapid thread identification combined with a lightweight, corrosion‑resistant design for smoother assembly and inspection workflows. The set’s anodised aluminium gauges and organised plastic case enable fast checks of common metric threads; order directly via Metav Werkzeuge or contact our consultants for technical advice. Gewindekontrollsatz MS910.425 — Thread gauge set (anodised aluminium, metric) by Filetta The Gewindekontrollsatz is a compact identification set for metric internal and external threads, intended for workshop inspection, maintenance and assembly tasks Anodised aluminium construction For metric internal and external threads Supplied in a durable plastic case 20-piece set covering M3–M24 Faster thread identification for everyday production The gauge set accelerates routine identification and basic verification of metric screw threads, reducing time lost on uncertain assembly decisions. Thanks to the wide size range from M3 to M24 and the inclusion of both internal and external gauges, common pitches and diameters can be checked on the spot. The primary benefit is operational efficiency: fewer stoppages during assembly and faster throughput in inspection processes. The solid, repeatable fit of each gauge supports reliable visual and tactile confirmation of thread form and pitch. Lightweight, corrosion‑resistant construction for frequent handling Being manufactured from anodised aluminium, the components combine durability with low weight, making them comfortable for daily use in bench and field environments. The surface treatment helps resist wear and corrosion, preserving the profile of each gauge and extending service life. Packaged in a plastic case that keeps items organised and protected, the set is easy to transport between workstations and to store without risk of damage to the thread contours. This construction promotes consistent handling with minimal maintenance. Practical scope for incoming inspection and maintenance The set is designed as a practical aid for incoming goods inspection, routine maintenance and quick on‑machine checks. It is intended for identification and coarse verification rather than micrometric measurement: the gauges confirm thread form and common pitch compatibility to avoid assembly errors. For workshops that need straightforward, rapid decisions—accept, reject, or select the correct fastener—this solution reduces rework and saves time in quality control routines while supporting a smooth production flow. Clear contents and metric compatibility for everyday sizes Contents include gauges for standard metric sizes that are frequently encountered in mechanical and electrical assemblies. The 20‑piece composition covers a typical workshop spectrum from smaller machine screws up to larger bolts used in fixtures and assemblies. This configuration makes the set suitable as a bench reference or as part of a mobile inspection toolkit, supporting technicians who require quick identification without complex measurement equipment. The lightweight profiles and organised layout aid rapid selection and return to service. For reliable metric thread identification from Filetta choose Metav Werkzeuge — contact our Emmerich specialists for tailored advice and fast supply via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: MS910.425 Manufacturer: Filetta Material: anodised aluminium Thread type: metric Set: 20 pieces Facts Sizes included: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M20x1.5, M20x2.5, M24x2.0, M24x3.0 Suitable for: internal and external threads Special features Identification and basic verification of metric threads Lightweight, corrosion‑resistant anodised finish Supplied in a protective plastic case Compact, workshop‑oriented organisation FAQ What is the primary purpose of this gauge set? The Gewindekontrollsatz MS910.425 by Filetta serves for quick identification and basic verification of metric internal and external threads to support inspection and assembly decisions. Can the gauges measure thread tolerances precisely? The set is intended for identification and coarse verification rather than precision tolerance measurement; for high‑accuracy checks, use calibrated metrology instruments. Which sizes are covered by the set? The set contains 20 gauges covering common metric sizes from M3x0.5 up to M24x3.0, suitable for many workshop and maintenance tasks. Is the material suitable for frequent workshop use? Yes — the gauges are made from anodised aluminium, providing a balance of lightweight handling and corrosion resistance for regular use. Does the set include a case for transport and storage? The Filetta MS910.425 is supplied in a durable plastic case that keeps each gauge protected and organised for transport between workstations. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of the combination of wide standard coverage, clear dimension data and compact shop-floor usability to speed up design and inspection tasks; order the thread chart via Metav Werkzeuge or ask our consultants for application advice. Filetta Thread Chart – comprehensive thread dimension reference, clear-format A Filetta Thread Chart that provides an immediate overview of thread dimensions across common international systems, intended as a compact reference for design, production and inspection. Universal lookup for Metric, UNC, UNF, BSW Clear dimensions for Gas and BA threads Compact format for shop-floor reference Useful for design, inspection and procurement Fast decisions with consolidated thread data The core benefit of this reference is the consolidation of many standards into a single sheet. The chart lists sizes and key dimensions for metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M and EG-MF, enabling rapid decisions during setup and verification. By combining these standards, the table reduces the need to consult multiple manuals and supports faster tool selection and drawing checks. Clear labelling and organised columns turn otherwise time-consuming lookups into a quick verification step, which improves shop-floor throughput and reduces machine idle time. Improved accuracy for manufacturing and inspection Having standard dimensions collated in one reference lowers the risk of specification errors when producing threaded parts. The chart highlights pitch, nominal diameters and common conversions, making it straightforward to match taps, dies and mating components. This logical presentation supports quality control routines and assists inspectors in cross-checking parts against the correct standard. Presented as a compact, easy-to-read layout, the reference helps maintain measurement integrity without complex interpretation, supporting reliable outcomes in both small-series manufacturing and routine maintenance. Practicality for engineers, buyers and technicians Designed to serve multiple roles, the table is a practical tool for designers verifying thread fits, for procurement teams specifying the correct fasteners, and for technicians performing assembly checks. The compact format is suited to the toolroom, drawing office or bench, meaning the information is available where decisions are actually taken. With its focus on usability, the reference speeds up specification workflows and contributes directly to process efficiency—an economical improvement in daily operations. Clear communication between teams and suppliers Standardised references reduce misunderstandings between design, production and suppliers. Using one authoritative chart for common thread forms creates a single source of truth that simplifies ordering and reduces returns due to mismatched threads. The clear mapping of thread types and sizes supports consistent documentation in technical drawings and procurement lists, improving collaboration across departments and with external partners. Contact Metav Werkzeuge today for procurement support, bulk orders or specific format requests for the Filetta Thread Chart (SKU MS835.162) — expert advice and reliable delivery from Emmerich are available to help integrate this reference into your workflow Technical Data Article number: MS835.162 Name: Thread Chart (Gewindetabelle) Manufacturer: Filetta UID: MS835.162 Facts Standards included: Metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M, EG-MF Purpose: Quick lookup of thread dimensions and pitches Intended use: Design checks, inspection reference, procurement specification Special features Consolidated display of multiple international thread systems Compact, shop-floor friendly format Suited for engineers, inspectors and purchasing staff FAQ Which thread standards are covered in the chart? The chart lists common standards including metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG‑M and EG‑MF for immediate comparison. Is this chart suitable as a shop-floor reference? Yes, the Filetta Thread Chart (SKU MS835.162) is designed for quick lookups at the bench or in the toolroom and is optimised for practical use by technicians and inspectors. Can the table be used for procurement specifications? The consolidated dimensions and standard identifiers make the chart appropriate for clear procurement documentation and ordering lists. Does the chart include pitch and nominal diameter data? Yes, the presentation includes key dimension data such as pitch and nominal diameters to aid fitting and tool selection. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Combine ISO 286‑2 compatibility with an instant lookup of more than 6,400 tolerance values for reliable design decisions and consistent inspection results — order the Tolerance table directly via Metav Werkzeuge or contact our consultants for tailored advice. Tolerance table — ISO 286‑2 reference chart (up to 500 mm) by Filetta The Tolerance table is a compact reference chart for immediate reading of tolerance values and fits according to ISO 286‑2, intended for engineering, quality control and workshop use. ISO 286‑2 compatibility up to 500 mm Over 6,400 tolerance entries Immediate reading for fits and tolerances Suitable for internal and external dimensions Faster decisions with standardised tolerance data The reference matrix provides a single, standardised source for clearance, transition and interference fits, reducing time spent searching dispersed tables. With direct mapping to ISO 286‑2 and coverage to 500 mm, the chart supports rapid verification of nominal sizes and tolerances, enabling engineers to confirm fit classes and tolerance zones without complex calculations. The compact presentation of tolerance values accelerates decision-making in design reviews and first-off inspections. Clear guidance for assemblies and inspection routines Presented as an immediate-reading table, the chart removes ambiguity when selecting shaft and hole tolerances for bearings, housings or shafts. The organised layout helps translate ISO class designations into usable limits for production and QC, so tolerance checks can be executed consistently on the shop floor. Where traceable documentation is needed, the dataset of 6,400+ entries serves as a reliable reference for specifying fits in drawings and inspection protocols. Practical benefits for workshops and design offices Adopting a single reference chart reduces errors caused by cross-referencing multiple sources and supports faster training of technicians and junior engineers. The concise format is optimised for routine tasks — from tolerance verification during assembly to prepare-for-inspection checks — and complements digital workflows where a human-readable standard is required alongside CAD and measurement reports. The association with Filetta denotes a focused tool for metrology professionals who value clarity and compliance. For standards-compliant tolerance reference and rapid integration into inspection routines, request the Filetta Tolerance table from Metav Werkzeuge today — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications. Technical Data Article number: MS835.163 Name: Tolerance table Brand: Filetta Label: Toleranztabelle Facts Standard: ISO 286‑2 Scope: up to 500 mm Entries: >6,400 tolerance values Special features Immediate-reading table of tolerance values and fits Includes internal and external dimensions Data suited to engineering and workshop reference FAQ What standard does this reference follow? The Filetta Tolerance table follows ISO 286‑2, providing standardised tolerance classes and zones for engineering use. Up to which nominal size are tolerance values provided? The chart covers nominal sizes up to 500 mm, with entries for both internal and external dimensions. How extensive is the dataset included in the chart? The reference contains more than 6,400 tolerance values for quickly determining fits and limits. Is this chart suitable for shop‑floor inspection tasks? Yes — the immediate‑reading format makes the chart suitable for routine inspection, assembly checks and specification clarification in the workshop. Can the table help when specifying fits on technical drawings? The dataset translates ISO class designations into practical limit values, supporting clear specification of fits and tolerances on drawings. Filetta: Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com