welche funktion hat ein gewindelehrdorn?

The combination of hardened steel construction, conformity to DIN 7162 and the built‑in wear allowance on the good side ensures repeatable pass/fail checks and a long service life; order the limit gauge pin directly via Metav Werkzeuge or contact our consultants for application advice. Limit gauge pin MS911.200 by Filetta — hardened steel, DIN 7162 The Limit gauge pin MS911.200 is a hardened‑steel limit gauge designed for rapid go/no‑go checks and routine dimensional control in production and inspection environments. Hardened steel construction to DIN 7162 Wear allowance on the good side Precision ground for repeatable checks Compact gauge pin for workshop inspection Reliable pass/fail control for fast inspection The MS911.200 serves as a robust, low‑complexity tool for immediate acceptance decisions on shafts, bores and fitments. Crafted from hardened steel, the gauge gives a clear binary signal—either the pin fits (go) or it does not (no‑go)—so measurement time is reduced and throughput is increased. Conformity to DIN 7162 provides a recognised reference for interchangeability and auditability, while the documented wear allowance on the good side compensates for gradual surface wear without compromising the threshold for rejection. This combination supports consistent quality control across repetitive production tasks. Durable design that reduces maintenance and uncertainty Surface hardening and precision grinding deliver stable contact geometry and precision that endures under frequent use. The hardened material resists abrasion, limiting size drift and extending intervals between replacements. Because the pin is designed with a measured wear allowance, inspection regimes can be planned rather than reacted to—maintenance cycles become predictable, and machine downtime is reduced. The result is fewer interruptions to production and a lower total cost of inspection over the component life cycle. Practical integration into inspection routines Compact and straightforward to handle, this limit gauge pin suits bench inspection, assembly stations and spot checks on the shop floor. Its geometry allows quick visual and tactile confirmation of conformity, supporting lean inspection workflows and minimising operator training. As a plain‑language measuring aid, the gauge complements digital systems by providing immediate, unambiguous results where rapid decisions are required. For customers seeking a balanced mix of durability and ease of use, this solution bridges laboratory accuracy and workshop practicality. For reliable, DIN‑compliant limit gauges from Filetta, contact Metav Werkzeuge for stock availability and tailored advice — Metav's specialists can recommend the correct gauge size and inspection routine for the application Technical data Article number: MS911.200 Manufacturer: Filetta Material: hardened steel Standard: DIN 7162 Special feature: wear allowance on the good side Facts Size: 1 SKU: MS911.200 Special features Hardened steel Wear allowance on the good side Precision ground Limit gauge / go‑no‑go function Category: gauges, gauge pins FAQ What material is the MS911.200 made from? The MS911.200 limit gauge pin is manufactured from hardened steel to provide wear resistance and stable contact geometry. To which standard does this gauge conform? This gauge complies with DIN 7162, ensuring a recognised reference for dimensional limits and interchangeability. What does "wear allowance on the good side" mean? The wear allowance indicates that the 'go' side has been dimensioned to permit a measured amount of surface wear before the part reaches the rejection threshold, extending useful life while retaining inspection integrity. For which checks is this limit gauge pin suitable? The pin is intended for go/no‑go acceptance checks on bores, shafts and mating features during production, assembly and incoming inspection. Is the MS911.200 suitable for workshop use or only for lab inspection? Its compact, robust design makes the MS911.200 suitable for both workshop inspection and routine production checks, offering quick, unambiguous pass/fail results. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of hardened steel construction, DIN 7162 conformity and a defined good-side wear allowance for reliable go/no-go checks. Order the limit plug gauge pin directly via Metav Werkzeuge or ask our consultants if needed. Filetta Limit Plug Gauge Pin MS911.201 — 1.5 mm, hardened steel, DIN 7162 The Filetta Limit Plug Gauge Pin MS911.201 is a precision gauge pin designed for rapid inspection of bore limits and tolerance checks in accordance with DIN 7162 Hardened steel for durable wear resistance Conforms to DIN 7162 for standardised inspection 1.5 mm diameter for fine bore verification Good-side wear allowance for reproducible results Consistent go/no-go checks that speed up inspection A limit plug gauge pin provides an immediate pass/fail result for internal diameters, eliminating time‑consuming measurement routines where a simple acceptance decision is sufficient. The MS911.201, made from hardened steel, offers stable geometry that minimises elastic deformation during insertion; this ensures that the 1.5 mm diameter remains true across repeated cycles. Conformity with DIN 7162 means the gauge pin fits established inspection protocols and simplifies documentation in quality processes, supporting faster throughput without compromising traceability. Long service life and predictable wear behaviour The design includes a defined good-side wear allowance, which protects the functional limit from premature rejection and allows planned replacement intervals. That wear allowance is documented so that measurement uncertainty remains low over the tool life, leading to fewer unexpected downtimes. The hardened material resists abrasion and preserves the calibrated gauge profile, translating into lower lifetime costs and fewer interruptions to production—an efficiency gain for shop floors and inspection benches alike. Simple integration into workshop and metrology routines These gauge pins are compact, easy to handle and suited to routine checks on small bores in assembly, machining and inspection environments. As a dedicated limit gauge, the item reduces operator decision time compared with micrometre or bore gauge measurements when an acceptance verdict is required. The compact format also facilitates storage in inspection kits and combination sets, supporting organised quality stations and quicker audit preparation. For repeatable bore inspections and standardised acceptance testing, request the Filetta limit plug gauge pin via Metav Werkzeuge’s specialists in Emmerich for tailored advice and reliable supply. Technical data Article number: MS911.201 Manufacturer: Filetta Material: hardened steel Size: 1.5 mm Standard: DIN 7162 Facts Product type: limit plug gauge pin Purpose: go/no-go bore inspection Category: gauge pins / measuring pins SKU: MS911.201 Special features Good-side wear allowance Suitable for routine inspection use Compact, single-diameter gauge pin FAQ What inspection tasks is this gauge pin suitable for? The Filetta limit plug gauge pin MS911.201 is intended for go/no-go checks of internal diameters where rapid acceptance decisions are required, for example in machining and assembly quality control. Does the gauge conform to a recognised standard? Yes, the gauge pin is manufactured to DIN 7162, ensuring compatibility with standardised inspection procedures and easier integration into documented quality systems. What material is the gauge pin made from and why does it matter? The pin is made from hardened steel, which maintains geometry under repeated use and offers good wear resistance, reducing measurement drift and extending service life. How does the good-side wear allowance affect usage? The specified wear allowance protects the functional surface used for the go decision, allowing predictable wear management and planned replacement before measurements become unreliable. Can the gauge pin be used for very small bores? With a 1.5 mm diameter, this gauge pin is intended for fine-bore verification and is suitable for small internal diameters typically encountered in precision engineering components. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of a standards‑based inspection tool that pairs hardened steel construction with DIN 7162 conformity and a practical wear allowance on the go side, ensuring reliable pass/fail checks and prolonged service life; order the gauge directly via Metav Werkzeuge or consult our team for application advice. Filetta Limit Plug Gauge G7 – 19 mm, hardened steel (DIN 7162) A Filetta Limit Plug Gauge G7 designed for fast go/no-go verification of 19 mm bores in line with DIN 7162 for consistent production control Hardened steel construction Conforms to DIN 7162 19 mm nominal diameter Wear allowance on the go side Rapid, standards‑compliant inspection that saves time A purpose‑built limit plug gauge provides an immediate quality decision: go/no-go assessment without the need for complex readouts. Conformity with DIN 7162 guarantees the gauge’s dimensions and tolerances match recognised inspection criteria, which accelerates in‑process checks and reduces bottlenecks on the production line. The 19 mm nominal diameter is specified for direct matching to mating bores; using a dedicated gauge for this diameter simplifies sampling plans and shortens cycle time while maintaining clear, auditable acceptance criteria. Robust construction for lasting accuracy Made from hardened steel, the gauge resists wear and maintains geometry across repeated use, which sustains repeatability of results. The design includes a wear allowance on the go side, a planned material margin that can be used to extend the service life before the gauge reaches its limit condition. In practical terms, the wear allowance postpones replacement, lowers lifetime cost, and preserves measurement integrity—critical when inspections are frequent or when a single gauge serves multiple machines or workstations. Easy integration into shop‑floor routines and quality systems The compact, single‑purpose format of this limit plug gauge suits assembly lines, quality control benches and manual inspection jigs. Implementation requires minimal training: the visual or tactile pass/fail outcome reduces interpretation time compared with continuous measuring instruments. For organisations aiming to standardise inspection methods, the gauge fits into existing metrological workflows and documentation. Metav’s position as a precision partner supports straightforward procurement and reliable supply from Emmerich, backed by decades of distribution experience for industrial metrology. Contact Metav Werkzeuge today to confirm suitability and request delivery of the Filetta Limit Plug Gauge G7 (SKU MS911.181); Metav’s advisors in Emmerich will provide practical guidance and rapid fulfilment Technical data Article number: MS911.181 Manufacturer: Filetta Designation: Limit plug gauge G7 Facts Nominal diameter: 19 mm Standard: DIN 7162 Special features Material: hardened steel Wear allowance on the go side Category: gauges / plug gauges / inspection pins FAQ What inspection task is this gauge intended for? The Filetta Limit Plug Gauge G7 (SKU MS911.181) is intended for quick go/no-go verification of 19 mm internal bore dimensions to support routine pass/fail inspection. Which standard does the gauge comply with? This limit plug gauge is manufactured to conform with DIN 7162, ensuring dimensional and tolerance compatibility for standardised checks. How does the wear allowance affect service life? The wear allowance on the go side provides an engineered margin that prolongs usable life by allowing controlled wear before the gauge reaches its limit condition. What material is the gauge made from and why does that matter? The gauge is made from hardened steel, which maintains geometry under repeated use and supports long‑term repeatability of inspection results. Can this gauge be used in automated inspection fixtures? Yes, the solid construction and single‑function geometry of this plug gauge make it suitable for integration into manual and automated fixtures where a 19 mm go/no-go check is required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of precise, repeatable inspection in a compact format: robust hardened steel construction and compliance with DIN 7162 ensure reliable go/no‑go assessment and long service life; order the limit plug gauge directly via Metav Werkzeuge or request detailed specification support from our consultants. Limit plug gauge G7 (MS911.160) – hardened steel, DIN 7162 — Filetta Limit plug gauge G7 (MS911.160) for quick verification of bore tolerances in routine inspection and incoming goods control Hardened steel construction for longevity DIN 7162 compliant inspection gauge Wear allowance on the good side for service life Precision gauge pin, 2 mm nominal size Repeatable inspection that reduces rework and inspection time The limit plug gauge offers a straightforward method for verifying bore tolerances without complex measurement setups. Manufactured from hardened steel, the gauge provides consistent contact geometry and wear resistance; this translates into repeatable pass/fail checks at points of inspection, reducing the time spent on detailed measuring instruments and lowering the risk of unnecessary rework. Compliance with DIN 7162 ensures that acceptance criteria are clear and comparable across suppliers, supporting efficient quality control in production and incoming goods. Durable design with a built‑in allowance for wear A defining characteristic is the wear allowance on the good side, which compensates for gradual material loss during repeated use and maintains the defined acceptance margin for longer. The hardened substrate keeps the contact faces stable, so the gauge preserves its functional geometry under regular workshop conditions. For inspection routines where robustness and predictable service intervals matter, this design reduces downtime and the frequency of replacements, providing a reliable tool for standardised checks. Practical integration into workshop and inspection routines Designed as a simple go/no‑go instrument, the gauge is ideal for rapid checks on components during assembly, jig setting and final inspection. The compact format and clear acceptance principle make it suitable for bench use and for operators with basic training in metrology. Combined with a documented standard such as DIN 7162, the tool supports traceable inspection protocols and straightforward documentation in quality records, assisting both production staff and quality engineers in maintaining batch conformity. Discuss specification details with Metav Werkzeuge or request a technical comparison from our Emmerich hub — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS911.160 Material: hardened steel Standard: DIN 7162 Nominal size: 2 mm Special feature: wear allowance on the good side Facts Product type: limit plug gauge Brand: Filetta SKU: MS911.160 Special features Robust contact faces Suitable for go/no‑go checks Purpose: bore tolerance verification Compact inspection tool for workshop use FAQ What is the primary use of this limit plug gauge? The limit plug gauge MS911.160 by Filetta is used for rapid go/no‑go verification of internal bore tolerances during incoming inspection and production control. What material is the gauge made from and why does that matter? The gauge is manufactured from hardened steel; this gives stable contact geometry and wear resistance, maintaining reliable inspection performance over repeated use. How does the wear allowance affect inspection intervals? The integrated wear allowance on the good side increases the effective service life by compensating for minor material loss, so maintenance and replacement intervals can be extended while preserving acceptance criteria. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

The hardened construction and conformity to DIN 7162 ensure reproducible acceptance checks, while the clearly indicated wear allowance on the go side supports long-term reliability. Combine robust material choice with standardised dimensions for consistent go/no‑go inspection; order the limit plug gauge directly via Metav Werkzeuge or consult its specialists for application advice. Filetta limit plug gauge — hardened steel, DIN 7162 A Filetta limit plug gauge designed for rapid go/no‑go checks of internal diameters, providing workshop-grade repeatability and a marked wear allowance for ongoing inspection integrity. Hardened steel construction DIN 7162 compliance Precision ground measuring pin Wear allowance on go side Dependable acceptance testing with hardened steel and standard conformity The gauge is manufactured from hardened steel, a material choice that resists surface deformation and maintains form under frequent use, which supports reproducible pass/fail decisions in production control. Conformity with DIN 7162 gives a clear normative basis for dimensioning and tolerances, reducing interpretation variations during inspection. The nominal size of 4 mm makes this item suitable for small bores and fine mechanical assemblies; the compact form factor simplifies handling while retaining the stiffness required for repeatable verification. How the wear allowance improves long‑term measurement reliability A distinctive characteristic is the wear allowance on the go side, which compensates for gradual material loss on the acceptance face and prolongs the interval between regrinds or replacements. The measuring pin is precision ground to present a stable reference surface for routine checks, so bench operators can rely on quick go/no‑go decisions without extensive setup. This targeted design reduces scrap risk and supports consistent quality control processes in small‑part production or inspection stations. Practical use and integration into workshop routines Constructed for straightforward bench use, the plug gauge fits into common inspection workflows and is compatible with existing go/no‑go procedures. The compact gauge is easy to store and retrieve, and the robust finish minimises maintenance needs. For quality systems, the clear marking of the wear allowance aids traceability in service records and in planning maintenance cycles, helping to maintain throughput without unexpected measurement drift. Choose Filetta's hardened steel limit plug gauge for reliable go/no‑go control and contact Metav Werkzeuge in Emmerich for order placement or technical consultation by phone or e‑mail Technical data Article number: MS911.164 Type: limit plug gauge Size: 4 mm Material: hardened steel Standard: DIN 7162 Facts SKU: MS911.164 Manufacturer: Filetta Special features Wear allowance on go side Precision ground measuring pin Intended for internal diameter acceptance testing FAQ What is the primary application of this limit plug gauge? The Filetta limit plug gauge is intended for quick go/no‑go verification of internal diameters, providing a pass/fail reference for small bores and fine mechanical parts. How does the wear allowance affect service life? The marked wear allowance on the go side extends the usable life of the gauge by compensating for gradual wear, helping to delay regrinding or replacement while maintaining acceptance criteria. Is the gauge suitable for laboratory calibration or only shop use? Manufactured from hardened steel and finished by precision grinding, the gauge is appropriate for workshop inspection and routine quality control; calibration scope depends on the laboratory procedure chosen. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Combine hardened steel construction, conformity to DIN 7162 and a defined wear allowance on the good side to ensure reliable, repeatable checks of internal diameters. Order the limit plug gauge directly via Metav Werkzeuge or consult our specialists for batch requirements and inspection planning. Filetta Limit Plug Gauge MS911.208 — Hardened steel, DIN 7162 A Filetta limit plug gauge designed for straightforward verification of internal diameters in production, inspection and toolmaking environments. Hardened steel construction DIN 7162 conformity Wear allowance on good side Durable design for consistent inspection results The gauge pin is manufactured from hardened steel, giving a robust contact surface that resists deformation and extends service life under frequent use. Conformity with DIN 7162 ensures dimensional consistency between batches, which supports reproducible measurement routines on the shop floor. The supplied wear allowance on the good side is a defined margin that permits planned replacement or reconditioning before the gauge falls outside acceptable limits, helping to maintain process stability. Efficient application in production and quality control As a compact limit plug gauge, this tool allows rapid Go/No‑Go style checks of bore diameters without elaborate set‑ups. The simple geometry makes inspection fast and unambiguous: a correct fit confirms compliance, while a no‑fit indicates corrective action is required. For assembly lines and first‑article inspections the gauge provides a quick, objective pass/fail criterion that reduces downstream rework and supports lean quality processes while keeping handling straightforward for operators. Planning for traceability and maintenance Each item is identified by the article number MS911.208, which supports clear inventory and inspection records. The combination of a hardened contact surface and the specified wear allowance aids maintenance scheduling: gauges can be tracked for accumulated wear and replaced before causing measurement uncertainty. The material and standard reference also ease procurement and cross‑checking with technical drawings, making the component a dependable: repeatable reference for routine internal‑diameter verification. Choose Filetta limit plug gauges for dependable internal‑diameter control — contact Metav Werkzeuge in Emmerich for batch quotations and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: MS911.208 Brand: Filetta Material: hardened steel Standard: DIN 7162 Size: 5 mm Special note: wear allowance on the good side Core specifications Diameter: 5 mm Special features Hardened steel construction Wear allowance on the good side Conforms to DIN 7162 Category: limit plug gauge / gauge pin FAQ What is the primary purpose of this limit plug gauge? The Filetta limit plug gauge MS911.208 is intended for rapid verification of internal diameters, providing a straightforward Go/No‑Go style check in production and inspection contexts. Which material and standard apply to the gauge? The gauge is made from hardened steel and manufactured to meet DIN 7162, ensuring dimensional stability and industry‑recognised conformity. How should wear allowance on the good side be interpreted? Wear allowance on the good side denotes a planned margin by which the contact face may wear before the gauge is considered out of tolerance; it supports proactive maintenance and replacement scheduling. Can the gauge be used for routine assembly checks on the production line? Yes — the design of this limit plug gauge is suited to fast, repeatable pass/fail checks on bore diameters, making it useful for in‑line quality control and assembly verification. How is the item identified for inventory and traceability? The article number MS911.208 is used to track the item in inventory and inspection records, aiding traceability and maintenance documentation. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Reliable inspection depends on durable, standardised tools: this limit gauge pin combines hardened steel construction with DIN 7162 conformity and a 5.5 mm nominal diameter to deliver repeatable checks and a measurable wear allowance on the good side. Order through Metav Werkzeuge or contact our consultants for procurement advice. Limit gauge pin — 5.5 mm, hardened steel, DIN 7162 A Limit gauge pin designed for precision go/no-go and bore checks in production and quality control, manufactured to DIN 7162 standards DIN 7162 standardised gauge pins Hardened steel for long service life 5.5 mm nominal diameter Wear allowance on the good side Repeatable inspection built on recognised standards Conformity to DIN 7162 ensures the pin fulfils established dimensional and geometrical requirements, which is critical for consistent go/no-go evaluation. The 5.5 mm nominal diameter is produced and controlled to the standard, so measurements performed with this plug remain comparable across production batches and inspection stations. Using a standardised pin reduces ambiguity in acceptance criteria and supports traceable quality processes, making it suitable for bench checks and inline verification. Engineered for durability and predictable life-cycle performance Constructed from hardened steel, the pin resists surface degradation during repeated insertion and withdrawal. The specified wear allowance on the good side provides a measurable margin that extends usable life while keeping inspection reliability intact; this allowance makes it clear when replacement is due before measurement uncertainty increases. Routine handling requires only basic cleaning and dry storage; these straightforward measures preserve the hardened surface and maintain conformity for longer, reducing downtime and replacement frequency. Practical benefit in workshop and inspection workflows Designed as a straightforward plug gauge, the component supports rapid verification of bore diameters, alignment checks and fit-control tasks where simple, repeatable decisions are needed. In small-series production and maintenance shops alike, the pin provides a fast, rational decision criterion—pass or fail—without elaborate equipment. The robust material and standard conformity make it a pragmatic choice for quality control points where reliable, easy-to-interpret results are the priority, helping to keep production moving with minimal inspection overhead. Discuss procurement and batch options for this Filetta limit gauge pin with Metav Werkzeuge in Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com for guidance and delivery details Technical Data Article number: MS911.209 Category: Gauge pins / Pin gauges Manufacturer: Filetta Facts Nominal diameter: 5.5 mm Standard: DIN 7162 Material: hardened steel Special features Wear allowance on the good side Suitable for go/no-go and bore checks Conforms to DIN 7162 FAQ What nominal diameter does this gauge pin have? The Filetta limit gauge pin MS911.209 has a nominal diameter of 5.5 mm, produced to DIN 7162 tolerances. What material is used for the pin? The pin is made from hardened steel, giving it high surface resistance and durability for repeated inspection cycles. How does the wear allowance affect service life? The documented wear allowance on the good side gives a clear limit for replacement, extending usable life while maintaining reliable go/no-go decisions. Is the pin suitable for production-line checks? Yes, the MS911.209 plug gauge is designed for quick pass/fail checks and can be integrated into workshop and production inspection points. Which standard governs the geometry and tolerances of this pin? This gauge pin is manufactured to DIN 7162, which defines the relevant geometric and dimensional requirements. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com

Take advantage of the combination of wide standard coverage, clear dimension data and compact shop-floor usability to speed up design and inspection tasks; order the thread chart via Metav Werkzeuge or ask our consultants for application advice. Filetta Thread Chart – comprehensive thread dimension reference, clear-format A Filetta Thread Chart that provides an immediate overview of thread dimensions across common international systems, intended as a compact reference for design, production and inspection. Universal lookup for Metric, UNC, UNF, BSW Clear dimensions for Gas and BA threads Compact format for shop-floor reference Useful for design, inspection and procurement Fast decisions with consolidated thread data The core benefit of this reference is the consolidation of many standards into a single sheet. The chart lists sizes and key dimensions for metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M and EG-MF, enabling rapid decisions during setup and verification. By combining these standards, the table reduces the need to consult multiple manuals and supports faster tool selection and drawing checks. Clear labelling and organised columns turn otherwise time-consuming lookups into a quick verification step, which improves shop-floor throughput and reduces machine idle time. Improved accuracy for manufacturing and inspection Having standard dimensions collated in one reference lowers the risk of specification errors when producing threaded parts. The chart highlights pitch, nominal diameters and common conversions, making it straightforward to match taps, dies and mating components. This logical presentation supports quality control routines and assists inspectors in cross-checking parts against the correct standard. Presented as a compact, easy-to-read layout, the reference helps maintain measurement integrity without complex interpretation, supporting reliable outcomes in both small-series manufacturing and routine maintenance. Practicality for engineers, buyers and technicians Designed to serve multiple roles, the table is a practical tool for designers verifying thread fits, for procurement teams specifying the correct fasteners, and for technicians performing assembly checks. The compact format is suited to the toolroom, drawing office or bench, meaning the information is available where decisions are actually taken. With its focus on usability, the reference speeds up specification workflows and contributes directly to process efficiency—an economical improvement in daily operations. Clear communication between teams and suppliers Standardised references reduce misunderstandings between design, production and suppliers. Using one authoritative chart for common thread forms creates a single source of truth that simplifies ordering and reduces returns due to mismatched threads. The clear mapping of thread types and sizes supports consistent documentation in technical drawings and procurement lists, improving collaboration across departments and with external partners. Contact Metav Werkzeuge today for procurement support, bulk orders or specific format requests for the Filetta Thread Chart (SKU MS835.162) — expert advice and reliable delivery from Emmerich are available to help integrate this reference into your workflow Technical Data Article number: MS835.162 Name: Thread Chart (Gewindetabelle) Manufacturer: Filetta UID: MS835.162 Facts Standards included: Metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG-M, EG-MF Purpose: Quick lookup of thread dimensions and pitches Intended use: Design checks, inspection reference, procurement specification Special features Consolidated display of multiple international thread systems Compact, shop-floor friendly format Suited for engineers, inspectors and purchasing staff FAQ Which thread standards are covered in the chart? The chart lists common standards including metric, BSW, Gas, BSF, Pg, BA, UNC, UNF, UNEF, EG‑M and EG‑MF for immediate comparison. Is this chart suitable as a shop-floor reference? Yes, the Filetta Thread Chart (SKU MS835.162) is designed for quick lookups at the bench or in the toolroom and is optimised for practical use by technicians and inspectors. Can the table be used for procurement specifications? The consolidated dimensions and standard identifiers make the chart appropriate for clear procurement documentation and ordering lists. Does the chart include pitch and nominal diameter data? Yes, the presentation includes key dimension data such as pitch and nominal diameters to aid fitting and tool selection. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com