Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
63mm T-Slot Screw M10 Strength Class 10.9 With Nut And Washer, DIN 787 - AMF
Take advantage of a DIN‑compliant fastening solution that combines high tensile strength and standardised geometry for secure fixturing; the M10 thread and 63 mm overall length ensure reliable clamping in 10 mm T‑slot systems. Order the bolt via Metav Werkzeuge or consult our technical team for specification matching. T‑Slot Bolt DIN 787 — T‑slot 10 mm, M10 x 63 mm (AMF) The T‑Slot Bolt DIN 787 M10 x 63 mm is a high‑strength fastening element for machine tables and modular fixturing, designed to sit and lock securely in 10 mm T‑slots for precision clamping. DIN 787 standardised geometry Grade 10.9 high tensile strength Supplied with nut and washer Durable, standardised clamping for demanding fixtures The bolt meets DIN 787, providing a standardised profile that simplifies component selection and ensures compatibility across many clamping systems. Manufactured to Grade 10.9, the fastener delivers higher yield and tensile properties compared with lower grades, which translates into greater clamping security and fewer retightening cycles. For operations that demand repeatable locating and minimal play, the standard geometry reduces setup time and helps maintain machining tolerances during production runs. Fast and reliable assembly with included accessories Equipped with an M10 thread and a total length of 63 mm, the fastener suits a wide range of table plates and clamping stacks. The scope of delivery includes a nut and washer, enabling immediate installation without sourcing additional parts and reducing assembly steps. The combined dimensions are optimised for direct use in 10 mm T‑slot channels, improving throughput during fixture changes and decreasing machine downtime through quick, dependable fastening. Designed for industrial workshop efficiency and compatibility The T‑slot design is intended for repetitive clamping in production and maintenance contexts where consistency and robustness matter. Compatibility with a 10 mm T‑slot makes the fastener suitable for common milling tables and modular fixture systems. The component’s standardisation supports inventory rationalisation and procurement efficiency, while the high‑grade specification contributes to a longer service life under cyclic loads. Where traceable conformity and predictable behaviour under load are required, this solution supports dependable workshop workflows. For expert guidance on integrating AMF T‑slot bolts into existing fixturing systems, contact Metav Werkzeuge for personalised advice and supply from our Emmerich location. Technical data Article number: 4000833306NW Norm: DIN 787 Product type: T‑slot bolt Brand: AMF Core dimensions T‑slot size: 10 mm Thread: M10 Overall length: 63 mm Grade: 10.9 Packing unit: 1 Features & additions Supplied with nut and washer Axial additions: A: 9.7; B: 45; E: 15; K: 6 FAQ Is this fastener suitable for standard 10 mm T‑slots? Yes. The fastener is specified for a 10 mm T‑slot and is manufactured to DIN 787 dimensions to ensure fit and function in standard T‑slot systems. What are the thread type and total length of the bolt? The bolt features an M10 thread with an overall length of 63 mm, designated under article number 4000833306NW. Does the scope of delivery include fastening accessories? Yes. The product is supplied complete with a nut and washer to enable immediate assembly. What strength class does the bolt have? The fastener is specified as Grade 10.9, offering high tensile and yield performance suitable for demanding clamping applications. Is the component suitable for repeated fixture changes in a production environment? Yes. The standardised geometry and high‑grade specification support reliable repeated clamping and reduced setup time in production workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
63x70mm V-Block Pair With Clamping Strap, 3.1 kg - Vertex
Take advantage of a compact footprint and tangible mass for steady support: the prism pair combines a 63 x 70 mm base and 3.1 kg mass with an integrated clamping bracket to secure round or prismatic workpieces during inspection and light machining. Order the VBC-195 directly via Metav Werkzeuge or consult our advisors for application advice. VBC-195 Prism pair with clamping bracket — compact 63 x 70 mm base, 3.1 kg A VBC-195 prism pair with clamping bracket designed for reliable, repeatable workpiece support in inspection benches and assembly jigs Precision V-contact for repeatable support Compact 63 x 70 mm base Integrated clamping bracket for secure hold Robust 3.1 kg mass for stability Stable support that reduces setup time and variation A prism pair provides a simple, mechanical method for locating cylindrical or prismatic parts with high repeatability. The paired V-surfaces guide the workpiece into a defined datum so that measurements and secondary operations are consistent. The 63 x 70 mm base ensures a compact footprint on fixtures or inspection plates, while the 3.1 kg mass helps damp vibration and resists movement during light handling. This combination of geometry and mass leads to fewer re‑setups and clearer inspection results, delivering measurable time savings in routine processes. Clamping bracket for secure alignment and safe handling The integrated clamping bracket transforms passive support into an active holding solution. By pressing the workpiece into the V‑seats, the clamp reduces slip and axial movement without complex fixturing. For operators less familiar with fixturing terminologies: a prism pair locates the part against two inclined faces that form a V, and the clamp keeps the part seated against those faces. This approach improves positional stability during visual inspection, gauging, or low‑force machining operations, thereby reducing the risk of measurement error or scrap. Compact design for flexible workshop integration The compact dimensions make the unit straightforward to position on benches, gauge blocks or portable inspection plates, allowing easy reconfiguration of workstations. The modest footprint is particularly useful where bench space is limited but metrological rigour is required. As a purpose‑built accessory from Vertex, the prism pair suits a range of standard metrology and light production tasks, enabling teams to adopt precise referencing without large, complex fixtures. The simple, rugged design also supports straightforward cleaning and low maintenance between shifts. Contact Metav Werkzeuge in Emmerich for a tailored selection of precision fixturing — Metav Werkzeuge offers application advice and fast supply from the European quality filter; info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: VBC-195 GTIN: 4061905084645 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Base footprint: 63 x 70 mm Weight: 3.1 kg eClass: 21160304 Special features Prism pair with clamping bracket Brand: Vertex SKU: VBC-195 FAQ What is the primary function of this prism pair? The VBC-195 prism pair is used to locate and support cylindrical or prismatic workpieces reliably, providing a fixed datum for inspection and light machining tasks. Can the VBC-195 be used directly on an inspection plate? Yes, the compact 63 x 70 mm base of the VBC-195 makes it suitable for mounting or positioning on inspection plates and benches where space is limited. How does the clamping bracket improve measurement repeatability? The integrated clamping bracket holds the workpiece against the V‑seats so that the position remains stable between measurements, reducing variation and improving repeatability with the VBC-195. Is the prism pair heavy enough to prevent movement during handling? With a mass of 3.1 kg, the VBC-195 offers appreciable stability for bench operations and light handling, helping to damp small disturbances during inspection routines. Who manufactures the VBC-195 and where is it made? The VBC-195 is supplied by Vertex; detailed manufacturer information is provided below. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
64x70mm Prism Pair With Clamping Staple - Vertex
Take advantage of secure workpiece holding and a compact footprint for consistent shop-floor measurement; the combination of a reliable clamping strap and a 64 x 70 mm base supports steady set-up and repeatable inspection cycles. Order the pair of V-blocks directly via Metav Werkzeuge or ask our consultants if needed. Pair of V-blocks VBC-006 by Vertex — with clamping strap and compact base Pair of V-blocks VBC-006 designed for precise positioning and secure clamping in small inspection and workshop setups Pair of V-blocks with clamping strap Compact base 64 x 70 mm Stable unit weight of 2.6 kg Suitable for workshop and inspection stations Secure holding for reliable measurement results The design delivers secure workpiece support, achieved through the integrated clamping strap that fixes cylindrical and prismatic parts without excessive handling. This results in improved repeatability during manual measurement and small-series inspection, reducing the need for rechecking and saving time in quality routines. The tool is intended for use where stability and predictable positioning are required rather than for heavy machining operations. Compact footprint that fits tight benches With a 64 x 70 mm footprint and a consolidated mass of 2.6 kg, the unit provides a low-profile solution for crowded benches and inspection tables. The compact dimensions allow for easy integration into existing setups while the weight contributes to damping minor vibrations, supporting precision when using dial gauges, height masters or handheld measuring systems. The small form factor helps maintain a tidy workstation and simplifies storage. Quick set-up and consistent alignment The clamping arrangement permits fast securing and release of parts, which shortens fixture time and increases throughput for repetitive measurement tasks. The geometry of the V seats is optimised for stable contact with round and squared stock, so alignment becomes predictable and less dependent on operator guesswork. As a result, routine checks run more efficiently and measurement variance is minimised, offering a clear operational advantage in quality control workflows. Built for workshop versatility and inspection accuracy This pairing is well suited to small-batch inspection, layout work and bench-level machining support. The robust design makes the set appropriate for repeated daily use in a workshop environment while keeping the emphasis on accurate measurement rather than heavy clamping forces. The product supports common metrology practices and can be combined with standard clamping accessories when a different holding configuration is required. Contact Metav Werkzeuge today to discuss application suitability for Vertex VBC-006 and secure a precise, low-footprint clamping solution for your inspection bench Technical data Article number: VBC-006 GTIN: 4061905087462 Manufacturer: Vertex Facts Base size: 64 x 70 mm Weight: 2.6 kg SKU: VBC-006 Special features With clamping strap Supplied as a matched pair Category: Vertex FAQ What types of parts can be clamped with this V-block pair? The V-block pair is suitable for cylindrical and prismatic parts; the clamping strap secures round stock and provides stable contact for straight edges during inspection with gauges or comparators. Is this item suitable for repeated bench use in a small workshop? Yes, the VBC-006 by Vertex is designed for regular workshop and inspection use, combining a compact 64 x 70 mm footprint with a stable mass of 2.6 kg. Does the product include any additional clamps or mounting hardware? The delivery comprises the matched pair of V-blocks with the integrated clamping strap as indicated in the product description. Can this V-block pair be used for precision layout work on a contrast plate? The geometry and secure clamping make the set appropriate for precise layout and bench-level measurement tasks where consistent reference faces are required. What is the manufacturer's model designation and origin? The product is sold as VBC-006 from Vertex and is listed under the Vertex product category. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
65.5mm Horizontal Clamp Low Base Self-Adjusting Foot, Zinc-Plated, 2.5kN Thrust 3.2kN Hold - Kukamet
Compact, low-profile design combined with a self-adjusting foot and zinc-plated finish ensures dependable clamping with minimal setup time. Benefit from a clamping force of 2,500 N and a holding force of 3,200 N for stable, repeatable fixtures. Order the Kukamet horizontal toggle clamp (SKU 552-3) directly via Metav Werkzeuge or ask our consultants if needed. Kukamet Horizontal toggle clamp »low-base« — compact horizontal clamping with self-adjusting foot A Kukamet horizontal toggle clamp with a low-profile base, designed for secure horizontal clamping in confined jigs and fixtures Low-profile horizontal toggle clamp Self-adjusting foot for uneven surfaces Zinc-plated corrosion resistance Clamping force up to 2,500 N Secure clamping where space is limited The low-profile base and compact footprint are engineered for use in tight jigs and assembly stations, reducing interference with adjacent tooling while maintaining accessibility. With a width of 55.5 mm and a height of 65.5 mm, this model fits into narrow fixture layouts without sacrificing stability. The moderate mass of 0.555 kg keeps moving parts light and responsive, which simplifies manual handling and faster fixture changes. The horizontal arrangement suits repeatable positioning tasks, enabling consistent orientation of workpieces on the production line. Consistent force for repeatable production outcomes Designed to deliver measurable workholding performance, the clamp provides a clamping force of 2,500 N and a holding force of 3,200 N, values that support reliable fixation during secondary operations and inspection. The self-adjusting foot compensates for slight surface irregularities, distributing pressure evenly and reducing the need for frequent fine adjustments. This mechanical consistency improves batch-to-batch repeatability and shortens setup time, making the device well suited to small-series production, assembly benches and jigs where predictable clamping is essential. Durable finish and integration into workshop workflows Finished with a zinc-plated coating, the clamp resists corrosion in standard workshop environments and preserves moving surfaces for longer service intervals. The toggle/lever design offers straightforward actuation and positive locking under load, supporting fast manual operation and clear tactile feedback. As a compact horizontal toggle clamp, it integrates into custom fixtures and modular clamping systems, where durability and compactness reduce interruptions and maintenance effort. Supplied by Kukamet and distributed through Metav, the component arrives with the assurance of a quality filter and steady supply for industrial and trade customers. Speak with Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal toggle clamp (SKU 552-3) into existing fixtures—our Emmerich team can advise on compatibility and application specifics Technical data Article number: 552-3 GTIN: 8680731502862 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Width: 55.5 mm Height: 65.5 mm Weight: 0.555 kg Clamping force (max): 2,500 N Holding force (max): 3,200 N Special features Zinc-plated material Horizontal, low-profile base Self-adjusting foot Toggle / lever clamp design FAQ What clamping and holding forces does the product provide? The Kukamet horizontal toggle clamp (SKU 552-3) delivers a maximum clamping force of 2,500 N and a holding force of 3,200 N for secure fixation during machining and assembly. Is this clamp suitable for tight fixture spaces? Yes. The low-profile base and compact dimensions of the Kukamet horizontal toggle clamp (SKU 552-3) make it appropriate for fixtures with limited vertical clearance. How does the self-adjusting foot affect setup and repeatability? The self-adjusting foot on the Kukamet horizontal toggle clamp (SKU 552-3) compensates for uneven contact surfaces, ensuring even pressure distribution and reducing the need for frequent manual readjustment. What finish does the clamp have and how does it help? The Kukamet horizontal toggle clamp (SKU 552-3) is zinc-plated, which enhances corrosion resistance and extends service life in typical workshop conditions. Which mounting orientation is intended for this clamp? This device is designed for horizontal clamping applications; the low-base format of the Kukamet horizontal toggle clamp (SKU 552-3) supports secure, horizontal-held workpieces in jigs and fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
650cc Hand Lever Grease Pump 15 Kg/cm² Pressure - Vertex
A compact hand pump that combines 650 cc capacity, a 15 kg/cm² working rating and lever operation to deliver controlled, repeatable lubrication; ideal for routine maintenance and service desks. Order the LT-18A directly via Metav Werkzeuge or ask our consultants if needed. LT-18A Hand Lubricant Pump — 650 cc capacity, 15 kg/cm² working pressure (Vertex) A robust, lever-operated LT-18A hand lubricant pump for workshop and service applications that delivers consistent dispensing for manual maintenance tasks *Lever-operated for controlled dispensing *650 cc capacity for extended operation *Rated to 15 kg/cm² working pressure *Compact 98 x 107 mm footprint Consistent dispensing for uninterrupted maintenance The LT-18A is engineered for reliable manual lubrication where repeatability matters. The combination of a 650 cc reservoir and a 15 kg/cm² working rating provides a balance between capacity and pressure, allowing longer intervals between refills while still delivering sufficient force for thicker greases. This results in fewer interruptions during routine servicing and a predictable dispensing volume per stroke. The construction supports precise application of lubricants, reducing waste and ensuring bearings and fittings receive consistent coverage. Easy handling and compact storage for everyday use Designed with practicality in mind, the hand pump’s lever-operated mechanism gives controlled metering with minimal operator effort. At just 1.6 kg and with 98 x 107 mm compact dimensions, the unit is straightforward to manoeuvre around machinery or stow on a maintenance trolley. The small footprint saves bench space and keeps the pumping assembly accessible without dominating the workspace. Clear, ergonomic actuation reduces strain during repeated use, supporting efficient work flow in busy service environments. Built for straightforward operation and dependable supply The pump’s simple design focuses on usability and serviceability rather than complex electronics, which suits workshops that require robust, low-maintenance tools. The lever drive and clear reservoir capacity make refills and inspections quick, while the rated working pressure ensures adequate performance with common workshop lubricants. Sourcing through an established distributor guarantees steady availability and part familiarity, helping to avoid downtime and maintain a steady supply chain for essential maintenance items. Choose the Vertex LT-18A for dependable manual lubrication and contact Metav Werkzeuge in Emmerich for technical guidance and reliable delivery: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: LT-18A GTIN: 4061905089473 Brand: Vertex EClass: 23069090 Facts Capacity: 650 c.c. Working pressure: 15 kg/cm² Weight: 1.6 kg Dimensions: 98 x 107 mm Special features Lever-operated design Hand-operated lubricant pump Compact footprint for workshop use FAQ Is the pump suitable for thicker greases and pastes? The LT-18A hand lubricant pump from Vertex is rated at 15 kg/cm², which supports the application of higher-viscosity greases; selection of lubricant should follow manufacturer guidance for best results. How much lubricant does the reservoir hold? The unit provides a 650 cc reservoir, allowing extended operation between refills and reducing the frequency of interruptions during maintenance. How portable is the pump for mobile maintenance tasks? Weighing approximately 1.6 kg with compact 98 x 107 mm dimensions, the pump is easily moved around the workshop and stored on trolleys or racking. Does the pump use a lever or trigger mechanism? This model is lever-operated, offering controlled dispensing and straightforward actuation for consistent metering. What identifiers should be used when ordering spare parts? Order or reference the Vertex LT-18A using SKU LT-18A and GTIN 4061905089473 to ensure correct matching. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
65mm Clamping Stroke Heavy-Duty Closure Clamp With Counterholder, 27 kN Holding Force - AMF
Take advantage of the heavy-duty horizontal design and 27,000 N maximum holding force to secure demanding workpieces reliably; the integrated counter-holder and generous 65 mm adjustment travel support efficient fixture setups — order directly via Metav Werkzeuge or consult our specialists for application advice. AMF 6849PH horizontal locking clamp (size 5) — heavy-duty, incl. counter-holder, 27 kN AMF 6849PH horizontal locking clamp (size 5) for heavy fixture clamping in assembly jigs and machining setups, offering a long adjustment range and robust holding capacity for industrial use Heavy-duty horizontal design Maximum holding force 27,000 N Adjustable travel 65 mm Includes counter-holder Reliable clamping power for heavy production tasks The AMF 6849PH horizontal locking clamp is engineered to deliver consistent clamping force under repeated cycles, making it suitable for demanding assembly and machining processes. With a maximum holding force of 27,000 N, the device secures larger or high-load components without additional bracing, which minimises rework and boosts process reliability. The robust horizontal configuration reduces interference with tooling and supports compact fixture layouts, enabling faster part loading and safer secured conditions during operations. Precise adjustment and quicker setup times The clamp provides an adjustable travel of 65 mm and a variable clamping range (B: 49–114 mm), which allows fine-tuning to a wide range of workpiece heights. This adjustability reduces the need for shims or repeated realignment and therefore shortens set-up time at the workbench. The included counter-holder ensures a secure counterpart for the latch mechanism, so clamping is immediate and repeatable — a practical advantage for batch work and series production where throughput matters. Built for durability and flexible workshop use Constructed as a heavy-duty unit and delivered with the counter-holder, this horizontal latch clamp resists the wear typical in industrial environments. The long lever and defined dimensions (e.g. H1: 146 mm, L1: 164 mm) support ergonomic handling and predictable kinematics in fixtures. The compact footprint and horizontally aligned actuator help maintain tool access and visibility, while the size 5 format balances force and installation space for a broad range of jigs and modular clamping systems. Choose the AMF locking clamp for reliable heavy-duty clamping and contact Metav Werkzeuge for tailored advice and prompt dispatch from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000604390NW Type: 6849PH Product: Locking clamp Brand: AMF Execution: heavy; includes counter-holder Packaging unit: 1 Facts Size: 5 Adjustment travel: 65 mm B: 49–114 mm C: 57 mm D: 12 mm E: 28–93 mm F: 35 mm G: 10.5 mm H: 32 mm H1: 146 mm K: 12.5 mm L: 86 mm L1: 164 mm M: 57 mm N: 82 mm S: 47 mm Maximum holding force: 27,000 N Special features Heavy-duty horizontal design Includes counter-holder Robust construction for series use Compact horizontal actuator Size 5 format for versatile fixtures FAQ What is the maximum clamping force of this latch clamp? The maximum holding force of the AMF 6849PH horizontal locking clamp is 27,000 N, suitable for securing heavy workpieces in fixtures. Which adjustment range is available for height compensation? Height adjustment (travel) is 65 mm; the clamping range B covers 49–114 mm for flexible setup. Is a counter-holder supplied with the clamp? Yes, the unit is supplied including the counter-holder, which provides a secure mating surface for reliable latching. Can this clamp be used in confined fixture spaces? The horizontal actuator and compact dimensions (for example H1: 146 mm, L1: 164 mm) make the AMF 6849PH suitable for fixtures where tool access and space are constrained. Which product code identifies this clamp? The clamp is listed under SKU 4000604390NW and type 6849PH from AMF. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
65mm Face Clamping Chuck Weldon Shank 25mm Clamping Ø, DIN 69871 Form AD - TECWERK
Take advantage of precise clamping, standardised taper compatibility and robust drive via the Weldon flat to keep setups reliable and repeatable in daily machining. Benefit from the combination of industrial standards (DIN 69871 Form AD) and a tight bore tolerance (H4) for consistent tool positioning. Order the TECWERK unit directly via Metav Werkzeuge or consult the Metav team for specification matching. TECWERK face clamping chuck SK40 with Weldon, 25 mm clamping diameter The TECWERK face clamping chuck is a SK40 toolholder with a steep taper to DIN 69871 Form AD, engineered for secure holding of cylindrical-shank tools with a lateral drive flat according to DIN 1835‑B. Weldon flat for secure side-drive Steep taper DIN 69871 Form AD 25 mm clamping diameter, tolerance H4 SK40 holder, 100 mm length, 65 mm body Accurate taper interface for consistent machining The steep taper compliant with DIN 69871 provides a standardised seating that reduces axial play and improves concentricity compared with non-standard holders. Combined with the SK40 configuration, the holder ensures interchangeability across machines that accept the form AD taper, which simplifies tool inventory and reduces spindle setup time. For workshops that require predictable runout and repeatable placement of cylindrical‑shank tooling, this specification supports reproducible results and lowers scrap rates. Secure clamping and tight bore tolerance for repeatability A 25 mm clamping diameter manufactured to H4 tolerance gives a close fit to shank diameters and thus minimises radial displacement during machining. The presence of the Weldon lateral drive means positive torque transmission without relying solely on clamping friction, improving performance on operations with higher lateral loads. These features together deliver improved surface finish and dimensional stability in milling and drilling processes where consistent tool position matters. Practical integration into workshop workflows With a compact body diameter of 65 mm and an overall A length of 100 mm, the chuck is designed for straightforward integration into standard SK40 spindles while keeping clearance requirements modest. The construction supports quick tool changes and predictable balance characteristics, contributing to efficient cycle times. For procurement and planning, the unit aligns with existing DIN tool standards, reducing the need for bespoke tooling solutions and simplifying spare‑parts management. Request specification advice or arrange supply of the TECWERK face clamping chuck via Metav Werkzeuge for dependable delivery from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000833744NW Norm: DIN 69871 Form AD Facts Clamping diameter: 25 mm Body diameter: 65 mm Length A: 100 mm Bore tolerance: H4 Special features Weldon flat for lateral drive (DIN 1835‑B) SK40 taper holder Designed for cylindrical‑shank tools FAQ What taper standard does this holder use? The holder uses the steep taper DIN 69871 Form AD, matching SK40 spindles for standardised seating. Which shank types are compatible with this chuck? Tools with a cylindrical shank and lateral drive flat to DIN 1835‑B are compatible with the TECWERK face clamping chuck. What is the clamping diameter and its tolerance? The clamping diameter is 25 mm with a H4 tolerance for tight, repeatable fits. How does the Weldon flat improve machining reliability? The Weldon lateral drive provides positive torque transmission, reducing slippage under lateral loads and supporting stable machining. Can this holder be used on any SK40 spindle? The SK40 configuration and DIN 69871 Form AD taper make it suitable for machines that accept this standard taper; compatibility should be verified against the machine spindle type. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
65mm Face Clamping Holder Weldon 25mm Clamping Diameter, DIN 69893 Form A HSK-A63 - TECWERK
Take advantage of a compact, standards-based holder that combines precise clamping and straightforward integration into HSK tool systems; its 25 mm clamping diameter and H4 bore tolerance give reliable repeatability for workshop and production use. Order or request specification support directly from Metav Werkzeuge for a dependable supply chain and technical advice. TECWERK Weldon clamping holder HSK‑A63 — Weldon-style holder with 25 mm clamping Ø, A = 110 mm The Weldon shank holder HSK‑A63 is a HSK‑interface toolholder designed to clamp cylindrical shank cutters with a lateral drive flat, suitable for machining applications where secure axial and radial locking is required. HSK‑A63 interface, DIN 69893 Form A 25 mm clamping diameter for Weldon shanks Bore tolerance H4 for precision fit Compact design: 65 mm diameter, A = 110 mm Secure, standards-based clamping that reduces setup uncertainty The holder uses the HSK‑A63 interface in accordance with DIN 69893 Form A, giving a rigid connection between spindle and toolholder that reduces runout and improves repeatability. With a 25 mm clamping capacity for tools with a lateral drive flat to DIN 1835‑B, the unit provides a reliable mechanical stop and positive torque transmission. The Bore tolerance H4 guarantees a tight fit at the mating surface, which helps maintain clamping accuracy during repeated tool changes and reduces the likelihood of vibration-related tool wear. Compact form factor for tighter tool magazines and stable machining With an outer diameter of 65 mm and an overall length A = 110 mm, the holder’s compact design permits installation in confined tool magazines without compromising rigidity. The short projection and robust construction improve stiffness at the cutting edge, which leads to better surface finish and extended tool life under typical milling and drilling loads. The Weldon-style lateral flat ensures axial retention while the HSK taper delivers radial support, creating a balanced connection for high-precision tasks. Practical benefits for workshop and production environments Engineered for repeatable performance in both single-machine shops and production cells, the holder accepts cylindrical shanks with a Weldon flat and clamps them securely for reliable machining cycles. The precise fit and standardised interface simplify inventory management—one adapter type covers a range of cutters—while the robust connection supports consistent process outcomes and reduced rework. The combination of standard compliance and mechanical simplicity supports quick changeovers and predictable setup times. Compliance and traceability for consistent quality Conformance to DIN 69893 Form A and compatibility with DIN 1835‑B tooling mean the holder integrates seamlessly into established HSK tooling systems. The clear specification and measurable parameters—clamping 25 mm, 65 mm diameter, A = 110 mm, and Bore tolerance H4—provide verifiable criteria for quality control and procurement. Supplied by TECWERK and listed as SKU 2000832397NW, the holder is described with the data necessary for procurement teams to compare options and ensure correct fitment. For technical advice or to secure this TECWERK Weldon clamping holder, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification and availability Technical data Article number: 2000832397NW Standard: DIN 69893 Form A Interface: HSK‑A63 Product type: Weldon clamping holder Brand: TECWERK Dimensions & measurable data Diameter D: 65 mm Clamping Ø: 25 mm Length A: 110 mm Bore tolerance: H4 Standards & features For cylindrical shank tools with lateral drive flat to DIN 1835‑B Weldon-style lateral clamping Compact design for tight tool stations HSK interface for rigid spindle coupling FAQ What spindle interface does the holder use? The TECWERK Weldon clamping holder uses the HSK‑A63 interface in accordance with DIN 69893 Form A, ensuring compatibility with HSK‑A spindles and standard tool systems. Which tool shanks are compatible with this holder? This holder is designed for cylindrical shanks with a lateral drive flat to DIN 1835‑B and clamps tools with a 25 mm shank diameter. How does the H4 tolerance affect performance? The Bore tolerance H4 on the holder provides a precise fit that reduces radial play and contributes to improved concentricity and clamping accuracy during machining. Is the holder suitable for compact tool magazines? Yes; the compact external diameter of 65 mm and overall length A = 110 mm allow installation in tighter tool stations while maintaining stiffness. What advantages does the Weldon-style clamping provide? The Weldon lateral flat offers positive axial retention and torque transmission, reducing slippage and supporting consistent cutting performance with repeatable tool changes. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
65mm Pot Magnet 43mm High With M12 Threaded Counterbore, Holding Force 400 N - TECWERK
Take advantage of a compact, high-temperature-capable magnetic fixing that combines reliable 400 N holding force with a compact 65 mm diameter for consistent fixture retention; order the part directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Pot magnet D65 H43 with M12 threaded blind hole – 400 N holding force (TECWERK) The Pot magnet D65 H43 with M12 threaded blind hole is a compact magnetic clamping solution designed for secure holding of fixtures and components in workshop and industrial environments. High-temperature resistant up to 450 °C AlNiCo 500 alloy for stable magnetism 65 mm diameter with M12 threaded blind hole Secure clamping with measurable performance The pot magnet delivers a consistent holding force of 400 N, distributed from its 65 mm diameter contact face to ensure dependable bracing of small to medium components. The integrated M12 threaded blind hole enables direct mounting to fixturing plates or jigs without additional adapters, simplifying assembly and reducing downtime. For production layouts where repeatable positioning matters, this magnetic retainer supports secure fixture placement and predictable load capacity, helping maintain process stability and throughput. Stable magnetic properties under heat Constructed from AlNiCo 500, the magnet maintains magnetic stability at elevated temperatures, with a maximum operating temperature of 450 °C. The specified coating process is rated to 200 °C, which helps preserve surface condition during thermal exposure. For operations involving heat treatment or oven-based processes, the alloy choice ensures the magnetic field remains reliable where ferritic magnets would lose effectiveness; this translates into fewer fixture failures and more predictable handling during thermal cycles. Robust design for workshop endurance The execution with a threaded blind hole offers a low-profile fastening option that protects the internal magnet assembly while enabling strong mechanical fixation. The geometry and material selection aim to reduce maintenance needs and support repeated mounting cycles typical in clamping technology. Supplied as a single unit per package, the component integrates easily into existing tool racks and holds up under frequent repositioning, reducing the time required for setup and adjustment in routine production tasks. Versatile applications across clamping tasks As a compact pot magnet from the clamping technology category, this part is suited to fixture building, temporary holding during assembly, and jigs used in light machining or inspection setups. The combination of AlNiCo 500 and the blind-thread mounting makes it particularly appropriate where elevated temperatures or compact installation space are factors. For buyers seeking to centralise procurement and secure consistent quality, the component aligns with workshop-standard demands for durable, measurable magnetic retention. For high-temperature magnetic fixing from TECWERK, contact Metav Werkzeuge to arrange procurement or to request application guidance directly from Metav’s specialists Technical data Article number: 4000832279NW Product type: Pot magnet Manufacturer: TECWERK UID: 4000832279NW Core specifications Diameter: 65 mm Height: 43 mm Holding force: 400 N Thread: M12 Maximum operating temperature: 450 °C Coating temperature resistance: 200 °C Packaging unit: 1 Special features Material: AlNiCo 500 Execution: with threaded blind hole Compact pot magnet design Intended for clamping and fixture applications FAQ What is the maximum holding force of this pot magnet? The pot magnet provides a maximum holding force of 400 N, specified for the TECWERK pot magnet (SKU 4000832279NW). Can the magnet be used in high-temperature environments? Yes, the TECWERK pot magnet, made of AlNiCo 500, is rated for a maximum operating temperature of 450 °C; the applied coating withstands up to 200 °C. How is the magnet mounted to a fixture? Mounting is via the built-in M12 threaded blind hole, allowing direct attachment to plates or jig elements without additional adapters. Is the material specified for the magnet suitable for industrial use? The core material is AlNiCo 500, chosen for its stable magnetic properties at elevated temperatures and consistent performance in industrial clamping contexts. How many units are supplied per package? The product is supplied as a single unit per packaging unit. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
65mm Pull Stud SK50 With M24 Thread, ISO 7388-3 Form AF - TECWERK
Benefit from standardised ISO 7388/II compliance together with an SK50 taper and M24 thread for robust, repeatable clamping; order directly via Metav Werkzeuge or consult the team for application advice. TECWERK pull stud SK50 — ISO 7388/II Form B, M24 thread The TECWERK pull stud is a precision-engineered SK50 retention component for CNC toolholding, manufactured to ISO 7388/II Form B standards and designed for secure drawbar engagement in demanding machining operations. ISO 7388/II Form B compliance SK50 taper for secure retention M24 threaded connection Central bore for drawbar engagement Consistent clamping for heavy-duty machining The retention component delivers reliable clamping through a combination of standard conformity and robust geometry. Manufactured to fit an SK50 taper and equipped with an M24 thread, the part ensures stable axial fixation under high cutting forces, reducing the risk of tool pull-out. Compliance with ISO 7388/II indicates dimensional compatibility across toolholding systems, which simplifies replacement cycles and minimises setup downtime. The retained focus is on measurable performance and repeatability rather than subjective claims. Clear dimensions that explain fitting and function Critical dimensions are machined to allow precise engagement with the machine drawbar and toolholder. The stud features a head and shank geometry reflected in values such as d1: 29.1 mm, d2: 19.6 mm, d3: 25 mm, and d4: 11.55 mm, with overall lengths L1: 65.5 mm and L2: 25.55 mm. These figures define the seating depth, load-bearing area and engagement depth; the central bore improves secure drawbar contact and eases chip evacuation at the interface. Stating these dimensions allows planners to check compatibility with existing spindles and to forecast manufacturability without ambiguity. Practical workshop advantages and integration Integration into an existing clamping inventory is straightforward: the component is a standard retention stud compatible with conventional SK50 toolholders and standardised drawbar systems. The central bore and form designation support routine maintenance and predictable replacement intervals, lowering the overall cost of ownership through reduced downtime. Sourcing via an established distributor brings logistical benefits and a local point of contact for technical queries, helping maintain production flow and inventory control with confidence. The emphasis remains on functionality, traceability and proven design rather than marketing superlatives. Contact Metav Werkzeuge in Emmerich for stock availability, compatibility checks and technical guidance on SK50 retention hardware; email info@metav-werkzeuge.com or call +49 2822 7131930 for direct consultation through a local precision partner Technical data Article number: 2000832721NW Brand: TECWERK Product type: Pull stud (drawbar) Label: Pull stud ISO 7388/II Form B SK50 with bore Facts Standard: ISO 7388/II Form B Thread: M24 Taper: SK50 d1: 29.1 mm d2: 19.6 mm d3: 25 mm d4: 11.55 mm L1: 65.5 mm L2: 25.55 mm Special features Central bore for drawbar engagement Form: B Packaging unit: 1 FAQ What taper and thread does this retention stud use? The retention stud is manufactured for an SK50 taper and an M24 threaded connection, ensuring compatibility with corresponding SK50 toolholders. Is the retention stud compliant with industry standards? Yes, the component is specified to ISO 7388/II Form B, which supports interchangeability and consistent fit in standardised toolholding systems. How do the listed dimensions affect installation? Dimensions such as d1: 29.1 mm and L1: 65.5 mm determine seating and engagement depth; these values allow technicians to verify correct fitment with the machine spindle and drawbar. Does the stud include a central bore and what is its purpose? The part includes a central bore to improve drawbar engagement and to aid chip clearance at the interface, enhancing secure retention during machining. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
65mm Tool Holder for Boring Bars E2 S Slotted, No Through‑Bore, DIN 69880, VDI40 - TECWERK
Take advantage of a vibration-damping, slotted clamping design and precise VDI40 compatibility for reliable boring-bar performance; order directly via Metav Werkzeuge or consult our specialists for application matching. Toolholder E2 S DIN 69880 (Type B) – VDI40, 32 mm clamping by TECWERK The Toolholder E2 S (Type B) secures boring bars in VDI40 toolholders and is engineered for reduced vibration and coolant flexibility in medium-duty turning and boring operations. Slotted design reduces vibrations Compatible with VDI40 spindles Secured by retaining ring against ejection External and internal coolant options Stable clamping that increases process reliability The slotted, Form E2 S construction is designed to wrap around the boring bar and deliver consistent radial support. This results in reduced vibrations and a more constant cutting engagement, which translates to improved surface finishes and longer tool life. Built to DIN 69880 standards for VDI toolholders, the assembly offers predictable performance in production environments where runout and chatter must be controlled. Design features that damp vibrations and accommodate bar profiles The holder’s slotted design permits controlled elastic deformation around the bar, which is the core mechanism for vibration damping. It is suitable for solid round boring bars, including those with a V-groove, and the clamping interface is sized for a 32 mm bar diameter. Because the body is Type B (not through-bored), the unit is optimised for standard clamping integrity rather than internal passage applications, ensuring secure retention during interrupted cuts and heavy engagement. Cooling adaptability and machining flexibility The design allows for both external and internal cooling, improving chip evacuation and tool life when machining challenging materials. Internal coolant use is conditional on the system design and the absence of a through-drilled shank in this Type B execution. The holder’s overall dimensions — 65 mm outer diameter and 142 mm overall length — provide a compact footprint while maintaining the rigidity needed for stable boring operations. Practical installation and dependable retention The toolholder is supplied with a retaining ring to prevent ejection into the turret, increasing workshop safety and uptime. The holder matches VDI40 interfaces and a 40 mm connection diameter where applicable, with a usable clamping length of 120 mm in its configuration. For routine maintenance, checking the clamping surfaces and retaining ring at regular intervals will sustain performance; replacement of worn components is straightforward and keeps machine availability high. Metav’s offering combines technical traceability and stock availability to reduce procurement complexity. For specification checks, compatibility advice or local stock information on the TECWERK Toolholder E2 S (Type B), contact Metav Werkzeuge for tailored guidance and short lead times. Technical data Article number: 2000833491NW Product type: Toolholder for boring bars Facts Overall diameter: 65 mm Clamping diameter (d2): 32 mm Overall length (L): 142 mm Effective length (L1): 120 mm Special features Form: E2 S Standard: DIN 69880 Type: B Through-bored: no Suitable for boring bars, slotted execution Reduces or prevents vibration by wrapping the boring bar Also suitable for solid round boring bars with V-groove Holder shaft drilled where possible (note: Type B not through-bored) Secured against falling out in turret by retaining ring Slotted length references: up to 16 mm = 4×D, 20 and 25 mm = 3×D, from 32 mm = 2.5×D External and internal cooling possible (internal subject to holder variant) FAQ What materials and bar types is this holder suited for? The TECWERK toolholder E2 S (Type B) is designed primarily for solid round boring bars, including bars with a V-groove; material suitability depends on the selected boring bar grade and insert geometry rather than the holder itself. Does the holder allow internal coolant through the shank? The holder supports both external and internal cooling in general design; however, this specific Type B variant is not through-bored, so internal coolant through the shank is not available on this version. How does the slotted design reduce vibration? The slotted geometry of the E2 S holder provides elastic clamping that absorbs and dissipates cutting forces, producing reduced vibrations and improving surface finish and tool life when using the correct boring bar diameter. Is this toolholder compatible with VDI40 toolholders on the lathe? Yes, the unit is configured for VDI40 spindles and adheres to DIN 69880 dimensional guidance for secure seating and repeatable positioning. What retention features prevent the boring bar from ejecting into the turret? The holder includes a retaining ring to secure the assembly and prevent ejection during interrupted cuts or tool indexing; this enhances safety and reduces the risk of damage in the turret. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
66mm Horizontalspanner, Massiver Haltearm, senkrechter Fuß, 1000N Druckkraft - Kukamet
Der Kukamet Horizontalspanner 112 kombiniert massiven Haltearm, Druckkraft bis 1000 N und verzinktes Material für sichere Spannlösungen in Werkstatt und Produktion. Nutzen Sie die robuste Bauweise und die kompakte Armlänge für präzise Fixierung. Bei Fragen liefert Metav fachliche Beratung und schnelle Lieferung ab Emmerich. Horizontalspanner 112 von Kukamet Der Horizontalspanner 112 ist ein Hebelspanner zur sicheren Werkstückfixierung mit verzinktem Gehäuse und kompakter Bauform, geeignet für vielseitige Spannaufgaben im Betrieb. Horizontalspanner »112« von Kukamet Druckkraft bis 1000 N Haltekraft bis 1200 N Arm 66 mm, Winkel 90° Verzinktes Material, senkrechter Fuß Robuste Bauform für dauerhafte Spannkraft Die Konstruktion mit massivem Haltearm gewährleistet dauerhafte Stabilität bei wiederholtem Einsatz. Durch die verzinkte Oberfläche wird Korrosionsschutz erreicht, was die Lebensdauer in feuchteren Werkstattumgebungen erhöht. Vorteilhaft ist die kompakte Armlänge von 66 mm, die Platz spart und zugleich eine zuverlässige Klemmwirkung ermöglicht. Kraftwerte, die für sichere Fixierung sorgen Die Nennwerte von Druckkraft 1000 N und Haltekraft 1200 N sind klar definierte Größen für die Auswahl des passenden Spanners. In der Praxis erlaubt diese Kombination das Halten von kleinen bis mittelgroßen Werkstücken unter wiederkehrender Belastung, ohne dass eine Nachjustierung nötig wird. Das erleichtert planbare Arbeitsabläufe und reduziert Stillstandszeiten. Einfache Montage und flexible Befestigung Mit dem senkrechten Fuß lässt sich der Spanner schnell und sicher an Tischplatten oder Vorrichtungen befestigen. Die Montage ist selbsterklärend und benötigt nur gängige Befestigungsmittel. Dadurch eignet sich das Produkt sowohl für den Einbau in Vorrichtungen als auch für den mobilen Einsatz an unterschiedlichen Arbeitsplätzen. Zielgruppe und Anwendungsfälle Entwickelt wurde das Produkt für Handwerk, Werkstatt und Fertigung, die eine kompakte, belastbare Spannlösung benötigen. Anwender profitieren besonders, wenn wiederkehrende Fixieraufgaben mit engem Bauraum anfallen. Durch die robuste Ausführung empfiehlt sich der Einsatz bei Reparaturarbeiten, Montage und Feinbearbeitung. Empfohlen wird der Kukamet Horizontalspanner 112 wegen seiner belastbaren Druckkraft und des massiven Haltearms direkt über Metav anzufragen; für technische Rückfragen erreichen Sie uns per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Technische Daten Artikelnummer: 112-2-D-C1 Marke: Kukamet Bezeichnung: Horizontalspanner 112 Fakten Druckkraft max: 1000 N Haltekraft max: 1200 N Arm: 66 mm Winkel: 90° Gewicht: 0.2 kg Besonderheiten Befestigungsart: senkrechter Fuß Material: Verzinkt Massiver Haltearm Storytrigger: Hebelspanner FAQ Wie hoch ist die maximale Druckkraft des Horizontalspanner 112? Die maximale Druckkraft des Kukamet Horizontalspanner 112 liegt bei 1000 N, was für viele Spannaufgaben in Werkstatt und Produktion ausreichend Dimensionierung bietet. Ist der Horizontalspanner 112 für feuchte Umgebungen geeignet? Ja, das verzinkte Material des Kukamet Horizontalspanner 112 sorgt für erhöhten Korrosionsschutz und ermöglicht den Einsatz in Werkstätten mit gelegentlicher Feuchtigkeit. Welche Befestigungsart bietet der Spanner? Der Spanner verfügt über einen senkrechten Fuß zur Befestigung an Tischplatten oder Vorrichtungen, was eine flexible Montage an verschiedenen Arbeitsplätzen erlaubt. Kann ich technische Fragen zur Anwendung an Metav richten? Für detaillierte Anwendungsfragen zum Kukamet Horizontalspanner 112 (SKU 112-2-D-C1) steht Metav mit Produktberatung zur Verfügung; Kontaktaufnahme per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930.
66x156x90.5mm V-Block Precision Prism Block 0.05mm Accuracy, 6.4kg Cast Iron - Vertex
Take advantage of the combination of accuracy 0.05 mm, fine-grain cast iron stability, and compact dimensions for dependable workpiece support; order the prism block directly via Metav Werkzeuge or consult our technical advisors for specifications and delivery options. V-6V V-block — Vertex prism block with 0.05 mm accuracy A robust V-6V prism block for secure workpiece support and inspection in metrology and workshop applications Fine-grain cast iron construction Accuracy 0.05 mm for reliable measurement Solid 6.4 kg mass for vibration damping Compact dimensions: 66 x 156 x 90.5 mm Stable base for precise inspection The prism block delivers a consistently stable support that reduces movement during measurement and inspection. With a rated accuracy of 0.05 mm, the component provides reproducible positioning for cylindrical parts and shafts, helping to minimise measurement scatter in quality-control routines. The V-groove geometry ensures concentric seating, while the substantial mass contributes to vibration damping, so test results remain reliable even when used in busy workshop environments. This combination supports efficient metrology workflows and reduces the need for repeated checks. Material selection that preserves long-term accuracy Manufactured from fine-grain cast iron, the prism block offers inherent thermal and mechanical stability that protects calibration over time. The material choice dampens small vibrations and resists rapid temperature fluctuations that can otherwise shift measurement baselines. Where surface contact and repeatability matter, the material’s structure supports persistent flatness and wear resistance, extending the interval between maintenance or recalibration and ensuring dependable component handling in production and inspection stations. Compact form for flexible fixturing The compact external dimensions of 66 x 156 x 90.5 mm allow easy integration into custom jigs, inspection benches and portable measuring setups without occupying excessive bench space. The moderate footprint, combined with the block’s mass, provides a sturdy clamping foundation that is simple to position and secures small to medium workpieces effectively. This balance of size and stability enables versatile use across measuring tasks, from bench caliper checks to machine-side verification, while maintaining easy handling when reconfiguring setups. Practical advantages for workshops and quality assurance Designed for everyday metrology tasks, the prism block supports consistent inspection procedures and faster cycle times through reliable seating and repeatable measurements. The robust construction and well-defined V-seat reduce setup variability, helping technicians achieve traceable results and increased throughput. The model is supplied under the Vertex brand and carries the SKU V-6V, making it straightforward to reference in documentation and purchase orders for procurement and inventory control. For specification support or procurement of the Vertex V-6V prism block, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice. Technical data SKU: V-6V GTIN: 4061905087936 Manufacturer: Vertex Facts Dimensions: 66 x 156 x 90.5 mm Weight: 6.4 kg Accuracy: 0.05 Special features Material: fine-grain cast iron Product type: prism block / V-block ECLASS: 21160304 FAQ What is the declared accuracy of the prism block? The declared accuracy is 0.05, listed as the tolerance for the Vertex V-6V prism block. Which material is used for the V-block and why does it matter? The V-block is made from fine-grain cast iron, chosen for its vibration damping and thermal stability that preserve measurement consistency. Can the prism block be used for precision inspection of shafts? Yes, the V-groove geometry of the V-6V provides secure seating for shafts and cylindrical parts during inspection and measurement tasks. How should the prism block be referenced in technical documentation? Reference the item as Vertex V-6V (SKU V-6V, GTIN 4061905087936) to ensure clear procurement and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
67mm Pneumatic Clamp 2,000N Push Force, 2,500N Holding Force, 95° Horizontal Foot, Galvanised Massive Arm - Kukamet
Take advantage of a robust clamping solution that combines high holding force, a compact 67 mm arm and a galvanised finish for reliable, low-maintenance operation; order the unit conveniently through Metav Werkzeuge or request expert advice from our consultants for integration into production fixtures. Kukamet 631 Pneumatic clamp — horizontal-foot mounting, galvanised, 67 mm arm The Kukamet 631 pneumatic clamp is a compact industrial clamp designed for secure, repeatable clamping in jigs and fixtures where horizontal mounting and high holding force are required. Kukamet 631 pneumatic clamp Galvanised construction for corrosion resistance Horizontal-foot mounting for stable installation 2,500 N max holding force Reliability where production demands it The Kukamet 631 pneumatic clamp delivers high clamping performance while remaining compact. With a maximum holding force of 2,500 N and a maximum actuation force of 2,000 N, the unit is suitable for applications that require firm workpiece retention under machining or assembly loads. The distinction between actuation force and holding force is important: the actuation value refers to the pneumatic input, while the holding figure describes the clamping capacity once engaged. This separation ensures predictable behaviour when the clamp is integrated into automated fixtures or repeated manual operations, helping to reduce cycle-time variance and improve process stability. Installation and accessibility optimised for shop floors Designed with a horizontal foot mounting, the clamp sits close to the fixture base, offering greater stability and easier alignment in confined setups. The 67 mm arm provides sufficient reach for common jig geometries while the 95° operating angle ensures clear access for loading and unloading parts. These dimensional details simplify fixture design and reduce the need for custom adapters. Because the mounting and kinematics are straightforward, the unit integrates smoothly into production stands, assembly benches and gauge fixtures, supporting quick changeovers and consistent clamping orientation across batches. Corrosion protection and robust construction cut downtime The galvanised finish protects the clamp against corrosion in workshop environments, while the massive holding arm minimises elastic deformation under load, extending service life and preserving clamping repeatability. The combination of sturdy construction and protective coating reduces routine maintenance and parts replacement frequency. For operations seeking dependable performance across long production runs, this design lowers total cost of ownership by keeping fixtures operational and reducing unscheduled stoppages. Supply from a quality-focused distributor further supports steady availability for workshop replenishment. Contact Metav Werkzeuge today for personalised advice on integrating the Kukamet 631 pneumatic clamp into existing fixtures and to secure reliable delivery from Emmerich. Technical data Article number: 631-3-D-C1 Designation: Pneumatic clamp 631 Manufacturer: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Arm: 67 mm Max actuation force: 2,000 N Max holding force: 2,500 N Angle: 95° Special features Galvanised material Horizontal foot mounting Massive holding arm Category: Clamps FAQ What clamping force can be expected from this clamp? The Kukamet 631 pneumatic clamp provides a maximum holding force of 2,500 N, with pneumatic actuation rated at 2,000 N, offering secure retention for many workshop and production tasks. Is the clamp suitable for use in corrosive workshop environments? Yes, the clamp features a galvanised finish that improves resistance to corrosion and helps maintain reliable performance in standard workshop conditions. How is the clamp mounted in a fixture? This model uses a horizontal foot mounting, designed for stable installation on base plates and fixture bodies where a low-profile attachment is preferred. What does the 67 mm arm mean for fixture design? The 67 mm arm indicates the reach from pivot to clamping point; it provides sufficient clearance for typical jigs while keeping the overall footprint compact for dense fixture layouts. Which applications are intended for this clamp? The clamp is intended for industrial clamping tasks such as assembly jigs, machining fixtures and repetitive production operations where consistent, firm clamping is required Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
67mm Rod Clamping Plunger Short Version Size 5, 4,000 N Holding Force - AMF
Data inconsistency: the product data lists the manufacturer as "AMF", but this name does not appear in the provided manufacturer directory. Because a matching manufacturer entry is mandatory for the final product text (the manufacturer and responsible party must be cited from the supplied list), a complete product description cannot be generated from the available information. Please supply either a corrected manufacturer name that matches one of the entries in the given directory or provide the full, verifiable manufacturer and responsible-party details for "AMF" so the specification can be completed. Once the manufacturer information is aligned with the directory, a full British English product description, technical data and FAQ will be produced in the required format.
67mm Vertical Clamp 2,000 N Thrust, 2,500 N Hold, Vertical Base, Heavy Arm Safety Lock - Kukamet
Reliable vertical clamping with a 2,000 N closing force and a massive holding arm provides secure, repeatable workholding while remaining lightweight for simple integration; order the vertical toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical Toggle Clamp 212 by Kukamet — 2,000 N clamping force, 67 mm arm A Vertical Toggle Clamp 212 designed for vertical fixtures and jigs, providing robust locking and consistent positioning for assembly and machining operations Massive holding arm with safety lock 2,000 N clamping force 2,500 N holding capacity Vertical base with 67 mm arm Secure clamping performance that reduces rework The clamp delivers a 2,000 N clamping force coupled with a 2,500 N holding capacity, ensuring components remain immobile during machining, welding or assembly. The distinction between clamping force and holding capacity means the device not only applies force but maintains it under dynamic loads, reducing part movement and the need for repeated setups. This measurable performance supports predictable cycle times and consistent quality in production processes, contributing directly to throughput and first-pass yield. Robust construction for demanding fixtures Built around a massive holding arm and a positive safety lock, the design focuses on long-term reliability in industrial environments. The unit mounts on a vertical base, providing a low-profile attachment for jig plates and fixture frames, while the 67 mm arm gives a balanced reach for typical clamping positions. The surface is finished in a blackened finish, offering basic corrosion resistance and an unobtrusive appearance at the workbench. At just 0.37 kg, the assembly is light enough for straightforward retrofitting yet engineered to withstand repetitive operation. Fast, intuitive toggle action for efficient workflows The mechanical toggle action converts a short lever movement into a high clamping force, enabling fast manual operation and rapid part changes. This mechanism reduces cycle time per operation and eases operator handling compared with slow screw clamps. Installation requires a vertical mounting plate and can be completed with standard fasteners; once positioned, the clamp provides repeatable closures for production sequences and jigs. The straightforward operation supports lean workflows and helps maintain production rhythm without complex adjustment procedures. Versatile fit for shops and production lines Suited to both specialised workshops and larger production cells, the clamp is a compact solution for jigs, test fixtures and assembly stations where reliable holding is essential. The combination of measurable force values, compact mass and integrated safety features makes it appropriate for repetitive tasks where component security and operator confidence matter. Technical queries or requests for configuration advice can be directed to Metav Werkzeuge to ensure the clamp integrates seamlessly into existing fixtures. Discuss application requirements with Metav Werkzeuge to specify the Kukamet Vertical Toggle Clamp 212 and confirm the optimal mounting and delivery from Emmerich. Technical data Article number: B212-3-D-L-C1 Manufacturer: Kukamet Weight: 0.37 kg Finish: blackened finish Core data Clamping force (max): 2,000 N Holding capacity (max): 2,500 N Arm length: 67 mm Mounting style: vertical base Features Massive holding arm Safety locking mechanism Vertical mounting for jig plates SKU: B212-3-D-L-C1 FAQ What clamping force can be expected from this clamp? The Kukamet Vertical Toggle Clamp 212 provides a maximum clamping force of 2,000 N and a holding capacity of 2,500 N (SKU B212-3-D-L-C1) for dependable part retention during operations. How is the clamp mounted to a fixture? Mounting is via a vertical base: the clamp is designed for attachment to vertical jig plates or fixture frames using standard fasteners for a low-profile installation. What does the safety lock do? The integrated safety lock secures the lever in the engaged position, preventing accidental release and maintaining consistent clamping during dynamic processes. Is the clamp suitable for retrofitting existing jigs? Yes; at 0.37 kg with a 67 mm arm reach, the clamp is compact and engineered for straightforward integration into existing fixtures and assembly tooling. What surface protection does the product have? The component is finished in a blackened finish, which offers basic protection against corrosion and a durable, workshop-appropriate appearance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
67mm Vertical Clamp 2,000N Thrust, Heavy-Duty Arm, Zinc-Plated, 2,500N Holding Force - Kukamet
Reliable galvanised construction combined with a massive 67 mm holding arm and up to 2,500 N holding force ensures stable, repeatable clamping in production environments. The compact weight and vertical base minimise footprint while delivering 2,000 N pressing force where it is needed most. Order the 212 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 212 Vertical Clamp — 2,000 N pressing force, galvanised — Kukamet The 212 is a vertical lever clamp designed for secure, repeatable workholding in compact fixture arrangements. Robust galvanised construction Massive 67 mm holding arm Vertical base for secure mounting Holding force up to 2,500 N Consistent clamping force for repeatable workflows The vertical lever design delivers a predictable clamping action, translating a robust lever movement into a measurable 2,000 N pressing force and up to 2,500 N holding force, which supports reliable fixation of components during secondary operations. The unit’s massive holding arm reduces deflection under load and improves repeatability across batches, helping to shorten set-up time and reduce rework. Specified performance figures allow planners to match the clamp precisely to fixture requirements, while the galvanised finish provides a technical corrosion barrier that preserves clamping geometry over time. This combination of force data and material treatment makes the component a pragmatic choice for workshop fixtures and small-series production where consistent results are required. Space-saving mounting with straightforward integration A vertical foot enables direct, compact attachment to tooling plates or workbench surfaces, keeping the clamp’s footprint minimal without compromising stability. The 67 mm arm length balances leverage and clearance, while the light overall mass (0.367 kg) simplifies handling and positioning during installation. The clamp’s dimensions and mounting style suit modular fixturing systems and confined assemblies; designers can integrate the device where horizontal clamps would be impractical. Clear numeric values for arm length, weight and forces support rapid CAD validation and procurement decisions, reducing engineering iteration and accelerating time to manufacture. Low-maintenance build for long service life and reliable results Constructed from galvanised material, the clamp resists surface corrosion and requires little routine attention, which supports continuous operation in busy workshops. The lever clamp architecture is inherently simple, with fewer wear-critical parts than more complex actuators; this minimises downtime and maintenance cost over the product’s service life. The sturdy design, emphasised by the massive holding arm, is geared toward repetitive use and offers predictable mechanical behaviour under load. For buyers seeking dependable clamping with straightforward upkeep, the device offers a practical balance of durability and performance, backed by measurable technical parameters rather than subjective claims. For tailored advice and reliable supply from our Emmerich hub, contact Metav Werkzeuge to procure the Kukamet 212 vertical clamp — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 212-3-D-C1 GTIN: 8680731501599 Manufacturer: Kukamet Facts Max pressing force: 2,000 N Max holding force: 2,500 N Arm length: 67 mm Weight: 0.367 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: vertical base Massive holding arm Lever clamp design FAQ What is the maximum holding force of this clamp? The Kukamet 212 vertical clamp provides up to 2,500 N holding force, enabling secure fixation for many workshop tasks. Which mounting style does the unit use? The clamp is supplied with a vertical base for direct mounting to tooling plates or benchtops, facilitating compact fixture design. What is the material and surface treatment? The clamp is made from galvanised material to reduce surface corrosion and extend service life in workshop conditions. How heavy is the clamp and how long is the arm? The device weighs 0.367 kg and features a 67 mm holding arm, balancing stability with compactness. Is the clamp suitable for repetitive production use? Yes; the lever clamp concept combined with a massive holding arm and quantified force ratings supports repeatable clamping cycles in small-series production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
67mm Vertical Clamp 2,000N Thrust, Massive Holding Arm & Safety Lock, Zinc Plated - Kukamet
Benefit from a robust, galvanised construction and the combination of 2,000 N clamping force with 2,500 N holding force for reliable vertical workholding. The compact 67 mm arm and horizontal foot allow flexible mounting in tight production or assembly fixtures. Order directly via Metav Werkzeuge or consult our specialists for application support. Vertical clamp 211 — Kukamet vertical lever clamp, galvanised, 2,500 N holding force A Vertical clamp 211 designed for secure vertical workholding in production, assembly and fixture applications, combining compact dimensions with a safety locking mechanism Galvanised steel construction 2,500 N maximum holding force Horizontal foot for flat mounting Safety locking with massive holding arm Consistent, measurable hold for production environments The clamp delivers a defined clamping force of 2,000 N and a holding force of 2,500 N, values that translate directly into repeatable fixturing and safer handling of components. The force figures are useful for calculation of fixture loads and process reliability; for instance, the higher holding force reduces the risk of part movement during machining or assembly. The massive holding arm and safety locking provide a mechanical secondary lock that maintains position even under vibration, improving process stability and reducing rework. Compact mounting that fits into tight fixture layouts With a short 67 mm arm and a horizontal foot for base mounting, this lever clamp is intended for applications where space is limited or low-profile installation is required. The galvanised finish protects against corrosion in workshop environments and simplifies maintenance compared with uncoated steel. At just 0.41 kg, the component contributes minimal additional mass to movable assemblies while providing a robust contact surface; the compact footprint supports close-packed clamp arrays for multi-point fixturing. Durable design aimed at industrial throughput Constructed from galvanised materials and engineered with a massive holding arm, the clamp is suitable for repeated actuation typical in jigs and fixtures. The lever mechanism is optimised for efficient manual operation and quick engagement, reducing cycle time on assembly lines. Specified as a lever-type vertical clamp, it is compatible with common workshop workflows and can be integrated into modular fixture systems. The product is identified as SKU 211-3-D-L-C1 and is suitable for settings where robust, long-term performance is required. For enquiries about suitability, bespoke fixture integration or to place an order, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance and procurement support Technical data SKU: 211-3-D-L-C1 GTIN: 8680731501254 ECLASS: 21041717 ETIM: EC011973 Core figures Clamping force (max): 2,000 N Holding force (max): 2,500 N Arm length: 67 mm Weight: 0.41 kg Materials & special features Material: galvanised Mounting type: horizontal foot Massive holding arm Safety locking mechanism Category: Lever clamps / Spanner FAQ What clamping and holding forces can be expected? The vertical clamp provides a clamping force of up to 2,000 N and a maximum holding force of 2,500 N for secure workholding with the Vertical clamp 211 Is the clamp suitable for tight fixture spaces? Yes, the short 67 mm arm and horizontal foot make the clamp appropriate for compact fixtures; refer to SKU 211-3-D-L-C1 for exact mounting dimensions What material and surface protection does the clamp have? The unit is made of galvanised steel to resist corrosion in workshop environments and to reduce maintenance frequency Can the clamp remain engaged under vibration? The safety locking and the massive holding arm are designed to maintain engagement under typical production vibrations, improving process reliability Which applications is this clamp intended for? Designed for production, assembly and fixture use where a compact vertical lever clamp with defined force values is required Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
67mm Vertical Clamp 2000N Thrust, Massive Holding Arm, Horizontal Foot, Blackened Finish - Kukamet
Take advantage of a sturdy design and dependable clamping performance: a solid holding arm combined with up to 2,500 N holding force delivers repeatable, secure workholding. Order the vertical clamp directly via Metav Werkzeuge or contact our consultants for fitting and integration advice. Vertical clamp 211 — Kukamet, 67 mm arm, horizontal base The Vertical clamp 211 is a compact vertical toggle clamp intended for secure workholding in fixtures and jigs, offering robust clamping and fast release for repetitive production tasks Robust solid holding arm 67 mm Horizontal base for stable mounting Holding force up to 2,500 N Blackened finish for corrosion resistance Stable clamping for repeatable setups A compact vertical clamp designed for fixture integration, the device combines a solid holding arm with defined actuation to maintain part position across repeated cycles. The separate values for clamping and holding are intended: clamping force 2,000 N provides the immediate press required to seat components, while holding force 2,500 N ensures continued retention during machining or assembly. This separation reduces the risk of movement during secondary operations and supports higher process reliability in batch production. Space-efficient mounting with durable finishing The horizontal foot allows the clamp to be secured to flat plates or benches without additional brackets, enabling compact fixture layouts and straightforward retrofitting. A horizontal base keeps the device low-profile, while the blackened finish gives surface protection suited to workshop environments. At approximately 0.374 kg, the unit is light enough for quick fixture changes yet substantial where rigidity matters. The vertical toggle mechanism offers clear open/close positions and fast manual or automated actuation, helping to reduce cycle times at the station. Practical applications and integration benefits Engineered for jigs, assembly stations and small-scale production, this clamp supports rapid part handling and reliable locating in repetitive tasks. The robust construction tolerates frequent use and simplifies maintenance requirements, lowering long-term downtime. For purchasers and production engineers seeking predictable workholding, this toggle clamp integrates with standard fixture plates and can be combined with other clamps to create balanced retention systems. If clarification on compatibility or mounting is required, Metav Werkzeuge's product advisers can provide technical guidance and integration suggestions. Contact Metav Werkzeuge today to discuss integrating the Kukamet 211 vertical clamp into existing fixtures or to request tailored advice from our specialists at Metav Werkzeuge Technical data Article number: B211-3-D-C1 GTIN: 8680731507690 Manufacturer: Kukamet Core technical data Arm length: 67 mm Holding force: 2,500 N Clamping force: 2,000 N Weight: 0.374 kg Mounting type: horizontal base Special features Solid holding arm Blackened finish Category: toggle clamp / vertical clamp Story trigger: lever clamp design FAQ What holding and clamping forces does the clamp provide? The Kukamet vertical clamp 211 (SKU B211-3-D-C1) specifies a holding force of up to 2,500 N and a clamping force of 2,000 N. How is the clamp mounted in a fixture? Mounting is via a horizontal base; the clamp is designed for direct fastening to flat plates or fixture boards. Is this clamp suitable for repetitive production fixtures? Yes — the robust construction and toggle action make the clamp suitable for repetitive jigs and assembly operations where consistent retention is required. What surface protection does the device have? The product is supplied with a blackened finish that improves surface durability and offers basic resistance against workshop environments. Can the clamp be used with automated handling systems? The vertical toggle action and defined open/close positions allow straightforward integration into semi-automated or manual pick-and-place setups; specific automation integration should be discussed with Metav Werkzeuge for best practice. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
67mm Vertical Clamp Massive Holding Arm, 2,000N Thrust / 2,500N Grip - Kukamet
Take advantage of a compact, corrosion‑resistant toggle clamp that combines a massive 67 mm holding arm with reliable force ratings for consistent production fixturing. Fast mounting via the horizontal base and low maintenance galvanised finish support a smooth workflow — order directly via Metav Werkzeuge or consult our specialists for integration advice. Kukamet 211 vertical toggle clamp — galvanised, 67 mm arm, horizontal base A Kukamet 211 vertical toggle clamp designed for secure, repeatable clamping in workshop and light industrial fixtures. Galvanised steel finish for corrosion resistance Massive 67 mm holding arm for rigidity Horizontal base for secure mounting 2,000 N clamping, 2,500 N holding force Robust clamping for durable fixtures The clamp is built from galvanised steel to resist corrosion in workshop environments and reduce surface wear over time. The massive 67 mm holding arm increases stiffness at the contact point, which improves repeatability during cycle work and minimises part movement under load. For production lines where consistent clamping reduces rework, the robust arm design translates into fewer interruptions and a lower risk of damaged components. The galvanised finish also keeps maintenance needs low, making the device suitable for regular use without frequent surface treatment. Reliable force control and safe holding Rated for a 2,000 N maximum clamping force and a 2,500 N maximum holding force, the mechanism separates clamping action from the static holding capacity. This distinction matters when a fixture must withstand sudden shear or vibration: the higher holding rating ensures parts remain secure even when external forces occur. The horizontal base provides a broad contact area for bolting the clamp to plates or jigs, so clamping forces are transmitted cleanly into the fixture and not into the workpiece. For applications demanding predictable pressure and secure retention, this configuration supports safe, repeatable operation. Simple integration and long service life At just 0.374 kg and with a compact footprint, the clamp is easy to integrate into existing jigs and automated fixtures without adding excessive mass. The toggle mechanism offers a fast-action closure that is both tactile and auditable during assembly checks, supporting efficient manual or semi-automated workflows. The design is optimised for longevity: galvanised surfaces and a sturdy mounting method reduce the need for replacement, while the overall construction keeps routine inspection straightforward. For workshops seeking durable components that simplify logistics, the clamp aligns with a “fit‑and‑forget” approach that helps maintain throughput. Choose the proven durability of Kukamet and contact Metav Werkzeuge to discuss supply and technical fitment for the 211 vertical toggle clamp with its 67 mm holding arm and galvanised finish Technical data Article number: 211-3-D-C1 GTIN: 8680731501223 ETIM: EC011973 ECLASS: 21041717 Core specifications Arm length: 67 mm Weight: 0.374 kg Max clamping force: 2,000 N Max holding force: 2,500 N Materials & features Material: galvanised steel Mounting: horizontal base Feature: massive holding arm Model: 211 FAQ What mounting method does the clamp use? The clamp is supplied with a horizontal base intended for bolting to plates or jigs, making it straightforward to secure the Kukamet 211 vertical toggle clamp (SKU 211-3-D-C1) in fixtures. Is the finish suitable for humid or workshop environments? Yes, the galvanised finish provides corrosion resistance appropriate for general workshop conditions and helps keep maintenance intervals longer. What forces can be expected during use? The mechanism delivers up to 2,000 N clamping force with a 2,500 N holding capacity, offering a margin for secure retention even under vibration or side loads. Can the clamp be used for repetitive cycle production? The toggle action and massive 67 mm holding arm are designed for repeatable operation, supporting frequent clamping cycles with stable performance. Which product identification should be referenced when ordering or specifying? Reference the Kukamet 211 vertical toggle clamp, SKU 211-3-D-C1, for ordering and technical specification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
67mm Vertical Clamp With Massive Holding Arm, 2000N Press Force, Blackened Finish - Kukamet
A compact vertical clamp that combines a heavy-duty holding arm, a 67 mm reach and up to 2,500 N holding force for secure vertical workholding; ideal for fixtures where repeatable clamping and minimal setup time increase throughput. Order the unit directly via Metav Werkzeuge or consult the specialists for application support. Vertical clamp 212 — heavy-duty vertical clamping with 2,500 N holding force (Kukamet) Vertical clamp 212 designed for secure vertical fixturing and jig work in production and workshop environments Heavy-duty holding arm 2,500 N holding force Vertical mounting foot 67 mm arm reach Secure vertical clamping that improves cycle reliability The device delivers consistently repeatable clamping thanks to a robust construction and a holding force of 2,500 N, which secures components during machining, assembly or inspection. The specified closing force of 2,000 N describes the actuator pressure applied when the clamp engages; the difference between closing and holding force reflects the mechanical advantage and safety margin designed into the unit. For production environments where fixture stability directly affects part quality, this clamping solution reduces rework and downtime by keeping workpieces steady during vertical operations. Built to last and easy to integrate into fixtures A heavy-duty holding arm and a blackened finish give the clamp corrosion resistance and mechanical resilience under frequent use. The 67 mm arm reach permits access to a variety of workpiece geometries while supporting compact system layout. Its low mass—approximately 0.367 kg—simplifies carriage and fixture design without sacrificing strength, enabling faster handling and lower inertia for robots or manual stations. The result is durable, low-maintenance clamping that preserves precision across long production runs. Designed for efficient workflows and clearer specification Format and fitting are optimised for vertical mounting: the unit is supplied with a vertical mounting foot, facilitating quick installation on plates and modular tooling systems. Referenced classification codes (eClass, ETIM) and the clear SKU label allow straightforward procurement and inventory management; technical teams benefit from unambiguous specification data during machine integration. Where traceable components and rapid replacement are required, the clamp’s compact footprint and standardised connection points support lean stocking and predictable service intervals. Contact Metav Werkzeuge for tailored advice, component sourcing and supply from Emmerich — info@metav-werkzeuge.com | +49 2822 7131930 — ask for the Kukamet Vertical clamp 212 (SKU B212-3-D-C1) for application-specific guidance Technical data SKU: B212-3-D-C1 GTIN: 8680731505320 Manufacturer: Kukamet Model: 212 Classification: eClass 21041717 ETIM: EC011973 Core technical data Arm length: 67 mm Holding force: 2,500 N Closing force (max): 2,000 N Weight: 0.367 kg Special features Vertical mounting foot Heavy-duty holding arm Blackened finish Compact, lightweight design Category: Clamps FAQ What holding and closing forces does the clamp provide? The Kukamet Vertical clamp 212 provides a holding force of 2,500 N and a maximum closing force of 2,000 N; these figures indicate the secure retention capacity and actuation pressure respectively. How is the unit mounted in a fixture? Mounting is vertical via the integrated vertical foot; the compact base allows straightforward bolting to plates and modular fixture components for rapid installation. Is the clamp suitable for automated cells? Yes; the low mass and 67 mm arm reach of the Vertical clamp 212 facilitate integration with automated handling and robotic stations, supporting repeatable, high-cycle operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
68mm Workpiece Carrier Suitable For Calipers Ø40-Ø62 - Vertex
Take advantage of a compact Ø68 mm design, compatibility with Ø40–Ø62 mm calipers and a low mass of 0.3 kg for reliable, repeatable measurement set-ups; order the VDC‑60 workpiece carrier directly via Metav Werkzeuge or consult their specialists for configuration advice. VDC‑60 workpiece carrier – compact Ø68 mm design, caliper-compatible (Vertex) VDC‑60 workpiece carrier is a compact clamping accessory designed for precise workshop measurement tasks and simple integration with calipers measuring Ø40–Ø62 mm. *Compact 68 mm diameter for tight setups *Compatible with Ø40–Ø62 mm calipers *Lightweight 0.3 kg for easy handling Accurate alignment for repeatable measurement results The carrier delivers a consistently centred support surface that simplifies measurement workflows and reduces set-up time. Thanks to the defined compatibility with Ø40–Ø62 mm calipers, alignment of the measuring instrument is straightforward, improving precision and reproducibility. This reduces the number of re-measurements required and helps maintain throughput in inspection routines. The design supports repeatable contact positioning, which is vital for quality-controlled production environments. Space-saving form that speeds up handling A compact diameter of Ø68 mm and a low weight of 0.3 kg make the accessory easy to position and reposition in constrained workspaces. The small footprint enables efficient use of bench or fixture space while the modest mass reduces operator fatigue during frequent handling. The resulting improvement in ergonomics and set-up speed contributes to shorter cycle times and a calmer workflow in busy workshops where multiple measuring points must be processed within a shift. Built for straightforward workshop integration Supplied under the Vertex name, the carrier fits into established metrology routines without complex adjustments. Labelling by SKU VDC‑60 and the associated identifiers allow for clear inventory control and quick reference in procurement or quality documentation. The simple function and clear compatibility data make the accessory suitable for metrology benches, inspection jigs and light clamping tasks where consistent support and easy caliper access are required. Contact Metav Werkzeuge for tailored advice on integrating the VDC‑60 workpiece carrier into existing inspection setups or request a specification sheet from their Emmerich-based specialists Technical data SKU: VDC‑60 GTIN: 4061905085208 eClass: 21029190 Manufacturer: Vertex Core specifications Diameter: 68 mm Compatible caliper range: Ø40–Ø62 mm Weight: 0.3 kg Features and compatibility Caliper-compatible support for measurement tasks Compact design for constrained workspaces Vertex branded accessory FAQ Is the carrier suitable for standard dial and digital calipers? The VDC‑60 workpiece carrier is specified for use with calipers that measure within Ø40–Ø62 mm, making it compatible with most standard dial and digital calipers that operate in that range. What is the diameter and how does it affect set-up? The carrier has a diameter of 68 mm, which provides a compact contact area that is beneficial where space is limited and precise centring is required. How heavy is the accessory and what does that mean for handling? At 0.3 kg, the carrier is lightweight, facilitating quick positioning and reducing operator effort during repeated measurement cycles. Can the carrier be identified easily in inventory systems? Yes. The item is listed as SKU VDC‑60 with GTIN 4061905085208, allowing straightforward tracking in procurement and stock systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
69mm Synchronised Thread Cutting Holder Weldon Shank DIN 1835 B+E, Coolant Feed ±0.5mm Axial Compensation - TECWERK
Take advantage of a synchronised thread-cutting chuck that combines a Weldon shank to DIN 1835 B+E, integrated coolant feed and a length-compensation range of ±0.5 mm to keep cycle times predictable and scrap rates low; order directly via Metav Werkzeuge or contact our consultants for application advice. TECWERK Synchronized Thread-Cutting Chuck DIN 1835 B+E — Weldon shank with coolant feed, for M4–M27 The TECWERK synchronized thread-cutting chuck is a precision accessory for synchronised thread cutting on CNC machines, designed to equalise pitch differences and maintain running accuracy in high-volume production. Weldon shank DIN 1835 B+E Integrated coolant feed Compensates synchronisation errors ±0.5 mm High runout accuracy and clamping force Minimise rejects with controlled synchronisation and clear numerical benefits The synchronised chuck delivers measurable improvements in thread quality by compensating for pitch discrepancies between the tap and the synchronised spindle. With ±0.5 mm length compensation, the device absorbs small variances that would otherwise transfer into bad threads or broken tools. The combination of Weldon shank DIN 1835 B+E and compact dimensions provides a stable connection to the machine, helping to reduce rework and increase first-pass yield. This technical stability directly improves process efficiency on automated thread-cutting cycles. Reliable clamping and coolant management boost tool life and consistency Equipped with an integrated coolant feed, the chuck supports effective chip evacuation and consistent lubrication at the cutting zone, which reduces tool wear and improves thread finish. The design achieves high clamping force through threaded tap collets with an integrated square, ensuring taps remain secure under both push and pull loads. The result is longer tool life, fewer changeovers and a steadier production rhythm — key advantages in any busy workshop or production cell. Precision engineering that fits into CNC thread-cutting systems The chuck is intended for use on CNC machines with synchronised thread-cutting devices and accepts both right- and left-hand threads across a broad range (M4–M27). The compact outer diameter of 50 mm and the 25 mm shank allow straightforward integration into existing tool systems while the overall length (A = 69 mm) keeps the tool projection optimised for stability. High runout accuracy supports consistent thread geometry, which is particularly relevant for serial production and critical-fit components. Practical handling and application-oriented design for workshop use Made for production environments, the chuck’s features focus on usability and robustness: the Weldon shank simplifies mounting, the coolant feed reduces manual intervention for lubrication and the compensation function dampens the effects of minor spindle synchronisation errors. These characteristics make the chuck suitable for machine shops and subcontractors who require reliable, repeatable thread-cutting performance without frequent adjustments. Contact Metav Werkzeuge for tailored application advice on TECWERK synchronised chucks and to discuss compatibility with specific CNC thread-cutting systems. Technical data Article number: 2000834907NW Manufacturer: TECWERK Packaging unit: 1 Standard: DIN 1835 B+E Data Outer diameter: 50 mm Shank diameter: 25 mm Length A: 69 mm Length compensation: ±0.5 mm Thread range: M4–M27 Special features Weldon shank DIN 1835 B+E Integrated coolant feed Compensates synchronisation errors on push and pull Suitable for right- and left-hand threads High runout accuracy High clamping force via threaded tap collets with integrated square For CNC machines with synchronised thread-cutting device FAQ What thread sizes are supported by this chuck? The TECWERK synchronised thread-cutting chuck supports a thread range of M4–M27, making it suitable for a wide variety of common tapping operations. Can the chuck compensate for spindle synchronisation errors? Yes, the chuck offers a length-compensation range of ±0.5 mm, allowing it to absorb minor synchronisation mismatches between the tap and the synchronised spindle. Is coolant supply integrated in the tool? An integrated coolant feed is included to ensure effective chip removal and consistent lubrication at the cutting interface. Will the chuck hold left-hand taps as well as right-hand taps? The design accepts both right- and left-hand threads, allowing flexible use across different tapping requirements. What are the key dimensions for machine integration? Key dimensions are an outer diameter of 50 mm, a shank diameter of 25 mm and a length A of 69 mm, which support compact mounting and stable operation. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm 5C Collet, Precision 0.02mm Runout, 87mm Length - Vertex
The combination of compact clamping, 0.02 mm accuracy and a 6 mm nominal bore provides dependable repeatability and improved process stability. Order the collet directly via Metav Werkzeuge or consult our specialists for tailored application advice. 5C-6 collet by Vertex — 6 mm bore, 0.02 mm accuracy A 5C-6 collet engineered for precision workholding in small-diameter tooling and high-consistency machining tasks Accurate runout ±0.02 mm Compatible with standard 5C toolholders 6 mm nominal bore for small tooling Compact form, 87 mm overall length Precision that stabilises production The primary benefit of the collet is its precision: a specified runout accuracy of 0.02 mm reduces concentricity errors and directly improves part tolerances and surface finish. In practical terms, lower runout means fewer rejects and less rework during serial production. The measurable accuracy is particularly valuable where repeatability is essential for batch consistency and when alternating between similar tool sizes. Compact clamping for faster set-ups Designed for small-diameter applications, the 6 mm nominal bore simplifies tool selection while maintaining high clamping force and axial alignment. The 5C interface ensures straightforward integration with existing 5C holders and chucks, enabling rapid tool changes and minimal set-up time. For workshops that process small cutters or precision drills, the compact design translates into greater throughput and predictable cycle times. Robust geometry for reliable shop-floor use A balanced combination of length and mass provides the necessary rigidity for stable machining: the 87 mm overall length and 0.21 kg mass contribute to consistent concentricity during operation. The construction supports repeatable clamping cycles and reduces vibration transmission, which helps to protect both tool life and workpiece quality. Regular cleaning and inspection of the clamping surfaces keep the system operating at the specified accuracy. Contact Metav Werkzeuge in Emmerich for expert advice on Vertex collets and to arrange prompt supply from our European stock Technical data Article number: 5C-6 GTIN: 4061905092190 Brand: Vertex Facts Diameter: 6 mm Runout accuracy: 0.02 mm Length: 87 mm Weight: 0.21 kg eClass: 21041712 Special features Collet type: 5C SKU: 5C-6 Compact form factor for small tooling Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/c2/2f/97/63/63972fc2c806fb82109e3721/5c-3-main.jpg FAQ What nominal bore does the collet accept? The collet accepts a nominal bore of 6 mm as specified for the 5C-6 collet from Vertex. What level of concentricity can be expected? The Vertex 5C-6 collet is specified with a runout accuracy of 0.02 mm, which supports tight concentricity requirements in precision machining. Will this collet fit existing 5C toolholders? Yes, the collet is designed for compatibility with standard 5C toolholders and chucks for straightforward integration. For which applications is this collet suitable? The collet is suited for small-diameter tooling in precision turning, milling and drilling where reduced runout and repeatability are required. How should the collet be maintained to preserve accuracy? Regularly clean the clamping surfaces, inspect for wear or contamination and ensure correct seating in the 5C holder to maintain the specified accuracy of the Vertex 5C-6 collet. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com