Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
7/16" T-Slot Insert Single, 3/8-16" Thread - Vertex
Take advantage of a compact fastener that combines precise dimensional compatibility with straightforward installation: the T-nut provides secure clamping in 7/16" T-slots, with a standard 3/8-16" thread for reliable fixture mounting—order directly via Metav Werkzeuge or consult our specialists for application advice. Vertex 3413I T-nut — compatible with 7/16" T-slots, 3/8-16" thread The Vertex 3413I T-nut is a single-piece fastening insert designed to secure clamps and fixtures in 7/16" T-slots on machine tables and workbenches. Compatible with 7/16" T-slots 3/8-16" internal thread Lightweight at 0.023 kg Single-piece design for easy placement Secure hold for clamping and fixturing A purpose-made fastening component, the 3413I T-nut delivers consistent clamping performance by matching common table grooves. Its main advantage is mechanical compatibility: the 7/16" T-slot fit ensures the insert sits flush and resists rotation under load, while the 3/8-16" thread accepts widely used clamping bolts. For workshop planners and maintenance teams, this means fewer non‑compatible parts in stock and shorter setup times, improving throughput in repetitive machining or assembly tasks. Predictable fit reduces setup time Supplied in a compact form with dimensions 11/16 x 7/8 x 1/2", the component offers predictable geometry for fixture designers and machinists. The recorded mass of 0.023 kg makes handling and inventory storage straightforward, and the standardised thread size simplifies parts sourcing. Explaining the term: a T-nut is a sliding insert that engages the T-shaped groove on a machine table, allowing bolts to be tightened from above—this standardisation reduces trial‑and‑error during jigs and fixture assembly and helps maintain consistent clamping forces. Simple installation and robust positioning The single-piece construction supports rapid placement into the slot and stable seating during bolt tensioning, which benefits repetitive operations and modular fixturing. With no complex assembly required, the insert is ideal where fast changeovers are needed. The design also minimises the risk of misalignment when tightening clamping hardware, contributing to stable workholding and fewer interruptions on the shop floor. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating Vertex fastening components into existing fixturing systems and to request product availability or delivery options Technical data Article number: 3413I GTIN: 4061905093623 EClass: 21029107 Facts Dimensions: 11/16 x 7/8 x 1/2" Weight: 0.023 kg T-slot compatibility: 7/16" Thread: 3/8-16" Special features Single-piece (einzelnd) design Brand: Vertex Images and technical drawing available FAQ What slot size is this T-nut designed for? The insert is made for 7/16" T-slots, ensuring compatibility with standard table grooves used in many fixturing systems; the Vertex 3413I matches that slot size for reliable seating. Which bolt thread does the T-nut accept? The component features a 3/8-16" internal thread, suitable for common clamping bolts and compatible with typical workshop hardware. Are the exact dimensions available for integration into a fixture design? Yes; the dimensions are 11/16 x 7/8 x 1/2" and can be used directly in CAD layouts to check clearance and seating for fixtures using the Vertex 3413I. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
7/8x1-1/4" Coupling, 1/2-12" & 1/2-13" Threads - Vertex
Take advantage of the combination of dual-thread compatibility, compact dimensions and lightweight handling for efficient workshop assembly and reduced inventory complexity. Order the coupling directly via Metav Werkzeuge or ask our consultants if additional data is required. Vertex 2614I coupling – compact 7/8 x 1-1/4" format with 1/2-12" & 1/2-13" thread options Vertex 2614I coupling for secure pipe and hose connections in workshop and machine tool environments Dual thread compatibility 1/2-12" & 1/2-13" Compact 7/8 x 1-1/4" format Lightweight construction 0.07 kg Suitable for workshop and machine tool use Streamlined connection for mixed-thread assemblies The dual-thread compatibility of this coupling covers both 1/2-12" and 1/2-13" fittings, reducing the need for multiple adapters and simplifying stock management. In practice, that means fewer line items in the stores and faster set-up times at the machine. The specified compact dimensions (7/8 x 1-1/4") make the component suitable where space is limited, while the clearly stated thread sizes support planning and procurement without guesswork. Easier handling and quicker installation on the workbench At approximately 0.07 kg, the coupling delivers a tangible benefit during repetitive assembly tasks: reduced operator fatigue and faster manual handling. The compact design allows for access in confined assemblies, and the simple thread engagement cuts installation time. For maintenance planners this translates into shorter downtimes and more predictable service intervals, supporting overall equipment effectiveness. Precision-made component that supports reliability Manufactured to Vertex standards, the 2614I coupling is intended as a reliable interface between hoses and fittings; precision manufacturing ensures consistent thread engagement and a secure connection under normal workshop conditions. The clear identification via SKU and GTIN supports traceability in procurement and inventory systems, helping quality managers maintain an auditable parts list and to match components to specification sheets. Contact Metav Werkzeuge for tailored advice on fitting compatibility or to secure supply of the Vertex 2614I coupling—Metav Werkzeuge is available by email or phone and can confirm technical suitability for specific applications Technical data Article number: 2614I Name: Coupling Brand: Vertex ECLASS: 21131711 GTIN: 4061905088049 Core technical data Size: 7/8x1-1/4" Thread: 1/2-12" and 1/2-13" Weight: 0.07 kg Special features Compatible with 1/2-12" and 1/2-13" fittings Compact format for confined assemblies Suited to workshop and machine tool applications FAQ What thread sizes does the coupling accept? The Vertex 2614I coupling is compatible with 1/2-12" and 1/2-13" threaded fittings, covering common imperial thread variants used in many workshops. How much does the coupling weigh? Weight for the coupling is specified as 0.07 kg, which supports easier handling during repetitive assembly tasks. What are the dimensional specifications? The component is supplied in a compact 7/8 x 1-1/4" format, suitable for installations with limited space. Is the coupling suitable for machine tool connections? Yes, the coupling is intended for workshop and machine tool environments where reliable thread engagement is required. How is the product identified for ordering and inventory? The item is listed under SKU 2614I and GTIN 4061905088049 for clear identification in procurement and stock systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
70-100mm Screw Vise No. 6400 Flat Support, Max Load 100 N - AMF
Take advantage of a compact, adjustable support that combines a max. load of 100 with a flat support plate and a precise TR 30 x 4 thread for reliable workshop clamping; order the component directly via Metav Werkzeuge or consult our advisors for setup recommendations. AMF Screw clamp Nr. 6400 - 100 — adjustable height 70–100 mm, flat support AMF Screw clamp Nr. 6400 - 100 provides an adjustable clamping support for fixtures and general workshop use, suited to repeatable setups and stable part support Adjustable height 70–100 mm range Flat support plate for stable contact TR 30 x 4 precision thread Max. load 100 for secure holding Stable support for repeatable clamping The adjustable height of 70–100 mm allows controlled positioning of components during machining and assembly, reducing rework and set-up time. The flat support design delivers consistent contact across workpieces, which improves repeatability. Built for workshop environments, this clamping support converts thread movement into reliable vertical adjustment, enabling straightforward alignment with fixtures. The compact construction in size Gr.100 keeps the footprint small while maintaining the necessary contact surface for stable holding. Precision mechanics for consistent setups A TR 30 x 4 thread provides coarse, dependable pitch for fast adjustment and secure locking under load. With diameters D1 50 mm and D2 50 mm, the component offers standardised interfaces for integration into existing clamping fixtures and subplates. These dimensions support accurate height control and mechanical stability, making the part suitable for routine production environments where tolerance to variation must be minimised. The functional design focuses on motion control and long-term mechanical integrity. Capacity and application versatility Rated with a max. load of 100, the device is sized to support a wide range of workshop tasks without over-specification. The flat support surface and the adjustable spindle make it suitable for fixture building, jigs and general support duties in metalworking and light assembly. Supplied as a single unit, the component is pragmatic for replacement or for incremental upgrades of existing clamping systems. Selected where straightforward, mechanical solutions are preferred, the construction emphasises robustness and ease of integration. Secure the AMF screw clamp via Metav Werkzeuge for dependable delivery from Emmerich — enquiries: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000833115NW Type: Nr. 6400 - 100 Brand: AMF Product: Screw clamp Packaging unit: 1 Facts Max. load: 100 Thread: TR 30 x 4 H min: 70 mm H max: 100 mm D1: 50 mm D2: 50 mm Special features Flat support plate Size Gr.100 Compact adjustable support FAQ What height range does the clamp cover? The AMF screw clamp Nr. 6400 - 100 has an adjustable height range from 70 mm to 100 mm. What thread specification is used for adjustment? Adjustment is via a TR 30 x 4 thread, providing coarse, reliable pitch for height changes. What load can the support carry? The device is rated for a maximum load of 100, suitable for a variety of workshop support tasks. Are the support diameters compatible with standard fixtures? Yes, the clamp features D1 50 mm and D2 50 mm dimensions allowing integration with common fixture interfaces. Is the component supplied as a single unit? The product is supplied in a packaging unit of 1 and is intended for direct installation into existing clamping setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
7000 N Clamping Force Closure Clamp With Hook, Black Oxide Finish, 65mm Thread Length - Kukamet
Take advantage of a compact latch solution that combines a holding force of 8,000 N, a closing force of 7,000 N and a horizontal foot for secure fixture mounting; order the component via Metav Werkzeuge or consult the technical team for selection support. Kukamet Latch Clamp 371 Light Series (B371-4) — horizontal foot, 8,000 N holding force A Kukamet Latch Clamp 371 Light Series designed for reliable locking of enclosures, jigs and light industrial fixtures where repeatable closure and positive engagement are required Horizontal foot mounting for stable installation Holding force 8,000 N for secure locking Closing force 7,000 N for reliable closure Blackened finish for corrosion resistance Integrated hook for positive engagement Consistent clamping power for repeatable processes The Kukamet Latch Clamp 371 Light Series delivers a clearly defined holding force of 8,000 N combined with a closing force of 7,000 N, making it suitable where predictable mechanical restraint is essential. These force ratings support robust fixture retention in assembly and transport stages, reducing slippage and rework. The quantified forces provide a straightforward basis for machine design and safety margins, enabling engineering teams to calculate loads and integrate the device into fixtures with confidence. The focused specification supports productivity by reducing cycle‑to‑cycle variability. Robust mounting and corrosion-resistant finish for workshop use A horizontal foot mounting provides a compact footprint and straightforward attachment to plates and frames, while the blackened finish improves surface resilience in standard workshop environments. The clamp’s net weight of 0.815 kg and a thread length of 65 mm allow simple mechanical integration into jigs without excessive mass or complex adapters. The integrated hook ensures positive engagement, making the latch suitable for panels and lids that require quick, audible closure. These practical characteristics simplify installation and maintenance in everyday industrial contexts. Versatile deployment across light industrial applications Engineered as a light series latch, this device combines compact dimensions with performance figures that suit fixture manufacture, cabinet closure and temporary clamping tasks. The design supports quick manual operation via lever action and can be mounted in horizontal orientation where space is restricted. Its features make it a pragmatic choice for workshops and small production runs seeking a balance between ease of use and measurable holding capacity. The clear technical data streamlines procurement decisions and reduces specification ambiguity. Choose the Kukamet 371 Light Series latch clamp for dependable mechanical holding and contact Metav Werkzeuge for local supply and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B371-4 GTIN: 4061905080708 Manufacturer: Kukamet Core figures Closing force: 7,000 N Holding force: 8,000 N Weight: 0.815 kg Thread length: 65 mm Materials & features Finish: blackened Mounting: horizontal foot Hook: integrated Special features: none eClass: 21041718 ETIM: EC011973 FAQ What maximum holding force does the latch provide? The Kukamet Latch Clamp 371 Light Series (B371-4) provides a holding force of 8,000 N, suitable for secure retention in light industrial fixtures. Is the device suitable for horizontal mounting on a fixture plate? Yes. The latch is designed with a horizontal foot mounting for stable attachment to plates and frames. What finish is applied to the clamp and what does it protect against? The clamp features a blackened finish that improves surface resistance against corrosion in typical workshop environments. Does the latch include a hook for positive engagement? The unit is supplied with an integrated hook to ensure positive, repeatable engagement of lids and panels. What are the product identifiers for ordering and specification? Refer to SKU B371-4 and GTIN 4061905080708 when specifying or ordering this latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Closing Clamp With Hook, Horizontal Base, 95mm Thread Length - Kukamet
Take advantage of the combination of robust holding force, compact horizontal-base design and a corrosion-resistant black oxide finish for reliable fixture performance. Order the clamp directly via Metav Werkzeuge or consult the Metav team for technical details and fast supply. Toggle latch clamp 351 by Kukamet — horizontal-base, hook-equipped, 8 kN holding force A toggle latch clamp 351 designed for secure, repeatable fastening in jigs and fixtures where a compact horizontal mounting and hook engagement are required Horizontal base mounting for low-profile installation High holding force of 8,000 N for secure retention Hook-equipped for positive engagement and quick release Black oxide finish for corrosion resistance and reduced glare Reliable, measurable clamping where it matters The clamp delivers a holding force of 8,000 N and a maximum pressing force of 7,000 N, values that translate to dependable fixation in repetitive production tasks. The toggle mechanism converts manual lever action into a high clamping output, enabling fast locking with consistent force. For applications that require defined clamping pressure, the clear numeric ratings support reproducible setup and quality control. The compact footprint and horizontal base simplify integration into fixtures and jigs, reducing the need for uprated mounting hardware while maintaining fixture stability. Durable finish and compact construction for workshop longevity Finished in a black oxide treatment, the construction resists surface corrosion and minimises reflective glare in bright workshop environments. The clamp’s overall mass of 0.815 kg balances robustness with ease of handling during assembly and reconfiguration. The hook-equipped end provides positive engagement for parts that must be held under tensile load or quick-release cycles. A thread length of 95 mm enables depth adjustment and secure attachment through a range of plate thicknesses, supporting versatile use across metalworking and general workshop jigs. Straightforward mounting and consistent repeatability Designed with a horizontal base for flush fitting to worktops or fixture plates, the clamp is suited to fixed or semi-permanent installations where repeated operations demand steady performance. Lever action ensures rapid operation; the hook offers reliable latching without complex alignment. The combination of measurable forces, compact mounting and corrosion-resistant finishing supports process stability and reduces downtime caused by misalignment or part slippage. For purchasers seeking reproducible results in medium- to heavy-duty clamping tasks, the specification provides clear, quantifiable evidence of capability. Contact Metav Werkzeuge for a prompt supply from Emmerich and expert advice on integrating the Kukamet toggle latch clamp 351 (SKU B351-4) into existing fixtures; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B351-4 GTIN: 8680731508567 Brand: Kukamet Model: 351 ECLASS: 21041718 ETIM: EC011973 Facts Holding force: 8,000 N Pressing force (max): 7,000 N Thread length: 95 mm Weight: 0.815 kg Special features Horizontal base mounting Hook-equipped latch Black oxide finish Lever-operated toggle latch FAQ What is the maximum holding force of the clamp? The Kukamet toggle latch clamp 351 provides a holding force of 8,000 N, suitable for secure retention in many fixture applications. How is the clamp mounted? Mounting is via a horizontal base; the clamp is designed for flush installation on fixture plates or benches. Does the clamp include a hook? Yes, the latch is hook-equipped to ensure positive engagement and straightforward release. What are the dimensions relevant for installation? Key installation data: thread length 95 mm and a weight of 0.815 kg for planning mounting and handling. Is the surface finish suitable for workshop environments? The clamp features a black oxide finish, offering surface corrosion resistance and reduced glare in industrial settings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Closure Clamp Vertical Foot With Hook, Zinc Plated, 95mm Thread Length - Kukamet
Reliable fixture locking with a galvanised body, strong holding force and adjustable spindle—ideal for jigs and transport fittings. Benefit from robust retention (8,000 N) and a compact vertical-foot design for easy mounting; order the clamp directly via Metav Werkzeuge or consult their specialists for application advice. 332 Toggle Latch Clamp — Vertical-foot mounting, galvanised, 8 kN holding force (Kukamet) 332 toggle latch clamp provides compact, repeatable locking for industrial fixtures and closures, combining durable coating and high retention in a small footprint Galvanised finish for corrosion resistance Vertical-foot mounting for secure installation 8,000 N holding force for strong retention Hook-equipped for positive engagement Reliable high-force locking that protects production quality The 8,000 N rated holding capacity, paired with a maximum clamping pressure of 7,000 N, delivers secure retention for parts during machining, transport and assembly. This level of force reduces the risk of component movement and consequential rework, supporting consistent process quality. The mechanism’s lever-style action ensures rapid engagement and disengagement, keeping cycle times low while maintaining safety margins in demanding workshop environments. Built to last in workshop and on the shop floor Constructed from galvanised material, the latch resists surface corrosion and retains functional reliability in humid or variable conditions. With a compact mass of 0.72 kg, the unit is easy to integrate into fixtures without overloading movable assemblies. The durable finish and robust components mean less frequent replacement and steady performance in repetitive industrial use, contributing to lower downtime and predictable maintenance planning. Flexible mounting and adjustment for many applications Designed for vertical-foot mounting, the clamp fastens neatly to plates and frames, enabling stable alignment on jigs and transport boxes. The adjustable spindle with a 95 mm thread length allows fine tuning of closing position and engagement depth, while the integral hook secures positive closure under vibration. This combination of mounting convenience and adjustability makes the device suitable for clamping, closure and securing tasks across assembly lines and tooling fixtures. Clear technical benefits for engineers and buyers The lever-based closure mechanism provides a compact alternative to larger clamping systems, saving space on fixtures without sacrificing retention strength. The galvanised surface reduces corrosion-related failure modes, extending service life and cutting lifecycle costs. As a simple mechanical solution with measurable force ratings, this toggle latch clamp offers predictable behaviour for process validation and fixture design. Contact Metav Werkzeuge for application guidance and to arrange supply of the Kukamet 332 toggle latch clamp; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid delivery from Emmerich Technical Data Article number: 332-4 GTIN: 8682843523728 Manufacturer: Kukamet Facts Weight: 0.72 kg Holding force: 8,000 N Maximum clamping pressure: 7,000 N Thread length: 95 mm eClass: 21041718 ETIM: EC011973 Special features Galvanised material Vertical-foot mounting Hook included Lever-style toggle clamp Category: Clamps (Spanner) FAQ What is the maximum holding capacity of this latch? The Kukamet 332 toggle latch clamp provides a holding force of 8,000 N and a maximum clamping pressure of 7,000 N, suitable for robust part retention in fixtures and transport applications. Is the clamp suitable for outdoor or humid environments? Yes, the galvanised finish on the 332 offers improved resistance to corrosion, making it well suited to humid workshop conditions and environments where surface protection is required. How is the latch mounted to a fixture? The unit uses a vertical-foot mounting arrangement, allowing secure attachment to plates and frames; the adjustable spindle (95 mm thread length) permits precise closing position adjustment. Does the product include a hook for positive engagement? Yes, the model is supplied with a hook included, providing positive engagement and secure closure under vibration or dynamic load. What are typical uses for this type of clamp? Common applications include jigs and fixtures, transport and shipping closures, assembly line holding, and any situation requiring repeatable, high-force mechanical locking. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Druckkraft, waagerechter Fuß, Gewindelänge 95 mm, mit Haken, Verzinkt, 0,815 kg - Kukamet
Kombinieren Sie die Verzinkung und die hohe Haltekraft für sichere Spannlösungen in Werkstatt und Industrie; profitieren Sie von der robusten Bauweise und sichern Sie das Produkt direkt über Metav oder sprechen Sie unsere Beratung an. Verschlussspanner (Hebelspanner) von Kukamet Der Verschlussspanner von Kukamet ist ein verzinkter Hebelspanner für belastbare Spann- und Halteaufgaben in Werkstatt und Produktion. Robuste Verzinkung schützt vor Korrosion Waagerechter Fuß für stabile Montage Druckkraft 7.000 N für sichere Fixierung Haltekraft 8.000 N für dauerhaften Halt Mit Haken und Gewindelänge 95 mm Langlebige Konstruktion für rauen Werkstatteinsatz Die verzinkte Oberfläche sorgt für Korrosionsschutz und verlängert die Lebensdauer der Spannvorrichtung auch unter anspruchsvollen Bedingungen. Durch die Kombination aus robustem Material und kompakter Bauform entsteht eine langlebige Lösung, die weniger Austausch und Wartung erfordert. Das Ergebnis ist weniger Stillstandzeit und höhere Verfügbarkeit von Spannmitteln in der Werkstatt. Kraft und Sicherheit bei Spann- und Halteaufgaben Mit einer maximalen Druckkraft von 7.000 N und einer Haltekraft von 8.000 N bietet die Vorrichtung ausreichende Reserven für viele Montage- und Prüfaufgaben. Die Unterscheidung zwischen aufgebrachter Kraft (Druckkraft) und tatsächlicher Halteleistung (Haltekraft) hilft bei der richtigen Auswahl: Für Schweißspanner, Montagevorrichtungen und Prüfvorrichtungen ist diese Dimensionierung besonders geeignet. Einfache Montage und flexible Befestigungsmöglichkeiten Der waagerechter Fuß erlaubt eine stabile Befestigung auf ebenen Flächen, während der integrierte Haken flexible Spanngeometrien ermöglicht. Die Gewindelänge 95 mm sorgt für variablen Einbau, das geringe Gewicht erleichtert Handhabung und Positionierung. Damit lässt sich die Spannlösung schnell an unterschiedliche Werkstücke und Aufbauten anpassen. Zielgruppe und empfohlene Einsatzfelder Entwickelt für Schlosser, Werkstätten und industrielle Anwender, eignet sich das Produkt als zuverlässiger Hebelspanner für Vorrichtungsbau, Serienmontage und mobile Spannaufgaben. Anwender mit Bedarf an robuster Mechanik profitieren von der einfachen Integration in vorhandene Spannsysteme und der klaren Leistungskennzeichnung. Kukamet Hebelspanner mit verzinkter Oberfläche und 8.000 N Haltekraft jetzt über Metav sichern — bei technischen Fragen erreichen Sie uns per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 351-4 Bezeichnung: Verschlussspanner 351 Marke: Kukamet Daten Druckkraft max: 7000 N Haltekraft max: 8000 N Gewindelänge: 95 mm Gewicht: 0.815 kg Besonderheiten Material: Verzinkt Mit Haken Befestigungsart: waagerechter Fuß Besonderheit: Keine ECLASS: 21041718 (Produktklassifikation) ETIM: EC011973 (Technische Klassifikation) FAQ Welche Kraftwerte sind beim Verschlussspanner relevant? Der Kukamet Verschlussspanner 351 liefert eine maximale Druckkraft von 7.000 N und eine Haltekraft von 8.000 N; diese Werte geben Auskunft über die Spannleistung und die zu erwartende Haltekraft im Betrieb. Ist der Verschlussspanner für den Außeneinsatz geeignet? Die verzinkte Oberfläche des Kukamet Hebelspanners bietet Schutz vor Korrosion, sodass der Verschlussspanner auch in feuchteren Umgebungen länger funktional bleibt, allerdings sollte regelmäßige Kontrolle erfolgen. Wie wird der Spannarm befestigt? Die Befestigung erfolgt über den waagerechten Fuß; die Konstruktion ermöglicht eine stabile Montage auf ebenen Flächen und einfache Integration in Vorrichtungen. Enthält das Produkt einen Haken zur Aufnahme von Werkstücken? Ja, der Kukamet Verschlussspanner ist mit einem Haken ausgestattet, der flexible Spannvarianten und einfache Fixierung unterschiedlicher Werkstückgeometrien ermöglicht. Welche Gewindelänge hat der Verschlussspanner und warum ist das wichtig? Die Gewindelänge beträgt 95 mm; diese Länge erlaubt variable Einbautiefen und Anpassung an verschiedene Aufbausituationen, was die Einsatzvielfalt des Spannmittels erhöht.
7000 N Horizontal Clamp With Safety Lock, Hooked Stainless Steel, 95mm Thread Length - Kukamet
Take advantage of high holding and clamping forces combined with corrosion‑resistant construction for secure, long‑term fixture performance; order directly via Metav Werkzeuge or consult our specialists for mounting advice. 351 Toggle Latch Clamp – Stainless steel, horizontal foot with safety lock (Kukamet) A robust 351 toggle latch clamp engineered for horizontal mounting on jigs, fixtures and production tooling to provide reliable closure and vibration‑resistant locking. Stainless steel construction Horizontal-foot mount for stable fixing Safety locking mechanism included 7,000 N clamping force, 8,000 N holding force Secure closing that keeps assemblies stable The latch delivers consistent clamping force while resisting loosening during dynamic loads. Designed as a lever‑actuated closure device, the clamp converts manual actuation into a controlled clamping stroke that secures components with up to 7,000 N of closing power and an 8,000 N holding capacity. This predictable performance reduces rework and downtime when fitting parts on conveyors, inspection jigs or welding fixtures. Corrosion resistance for demanding shop environments Constructed from stainless steel, the unit offers enhanced resistance to coolant splash, humidity and industrial contaminants. The material selection extends service life and minimises maintenance cycles compared with plated steel alternatives. Where frequent cleaning or abrasive atmospheres are present, the stainless construction supports sustained operational reliability and less frequent replacement. Safe operation with horizontal mount and lock The horizontal‑foot mounting provides a compact footprint and straightforward attachment to base plates or fixture rails, promoting repeatable alignment. The integrated safety lock prevents accidental release once closed, improving operator safety and process stability in automated or semi‑automated sequences. A built‑in hook adds an additional securing point for positive engagement under vibration. Straightforward integration into production tooling Threaded mounting and a defined 95 mm thread engagement simplify installation and alignment in bespoke fixtures. The compact form factor and clear mechanical function make the latch suitable for retrofitting existing jigs as well as specification in new tooling designs. Documentation and catalogue references are available for design verification and parts list integration. Contact Metav Werkzeuge for technical advice on integrating the Kukamet 351 toggle latch clamp into production fixtures or to request a quotation — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: S351-4-L GTIN: 8680731509694 Manufacturer: Kukamet SKU: S351-4-L Core data Weight: 0.815 kg Max clamping force: 7,000 N Max holding force: 8,000 N Thread length: 95 mm Special features Material: stainless steel Mounting: horizontal foot Safety locking mechanism Hook included Category: Spanner FAQ What is the maximum clamping capacity of this latch clamp? The Kukamet 351 toggle latch clamp provides a maximum closing force of 7,000 N and a holding capacity up to 8,000 N for secure fixture retention. Is the clamp suitable for corrosive or humid environments? Yes, the 351 is made from stainless steel, which improves resistance to moisture and common workshop contaminants compared with standard plated steels. How is the clamp mounted to a fixture? The clamp uses a horizontal‑foot mounting arrangement with a 95 mm thread engagement for reliable attachment to base plates and jigs. Does the unit include a safety mechanism to prevent accidental opening? The Kukamet 351 features an integrated safety locking mechanism and an additional hook for positive engagement under vibration. Can the latch be used on moving or vibratory assemblies? The combination of the safety lock and high holding force makes the clamp suitable for use on assemblies subject to vibration or intermittent loads. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Toggle Clamp Horizontal Base With Hook, 95mm Thread Length - Kukamet
Take advantage of the combination of high holding power, compact mounting design and corrosion-resistant finish to secure fixtures reliably and improve throughput. Order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Toggle latch clamp 331 — horizontal-base toggle clamp, 7 kN pressing force (Kukamet) A Toggle latch clamp 331 engineered for secure workholding in jigs and fixtures, featuring a horizontal mounting foot for straightforward integration into production setups Robust holding force up to 8,000 N Horizontal base for easy mounting Blackened finish resists corrosion Integrated hook for positive engagement Reliable clamping for consistent production The latch provides a holding force of 8,000 N and a pressing force of 7,000 N, values that translate into dependable restraint for fixtures and workpieces during machining or assembly. These figures describe the forces the mechanism can sustain under load, which helps planners estimate safety margins and cycle capability. Built for repetitive use, the mechanism converts lever motion into a firm closed position, reducing the risk of part movement and enabling shorter cycle times without compromising operator safety. Space-saving design that simplifies installation A compact footprint and horizontal base enable straightforward mounting on fixture plates or tooling blocks where vertical clearance is limited. The clamp weighs 0.72 kg, keeping added mass low on moving assemblies, while the 95 mm thread length allows fine adjustment of the engagement point for precise part location. The combination of low weight and adjustable spindle means faster setup changes and fewer shim adjustments, supporting lean workshop processes and flexible fixturing. Durable surface and secure engagement for long service life Finished in a blackened coating, the housing and components resist wear and show improved resistance to surface corrosion in typical workshop conditions. The unit includes an integrated hook, ensuring a positive mechanical engagement that prevents accidental release under vibration or side loads. These attributes extend service intervals and reduce the need for frequent replacement, contributing to predictable maintenance planning. Practical fit in industrial and trade environments Designed for general fixture applications, this toggle latch clamp suits production lines, toolroom jigs and assembly benches where repetitive clamping is required. The compact mechanism supports modular tooling concepts and quick-change pallets, allowing maintenance and set-up staff to maintain throughput without complex adjustments. For operations aiming to standardise on robust, easy-to-install components, the clamp offers a straightforward performance uplift. Choose the Kukamet toggle latch clamp 331 for robust, repeatable clamping—contact Metav Werkzeuge for specification support and dependable supply from Emmerich. Technical Data SKU: B331-4 GTIN: 8680731508444 Model: 331 Manufacturer: Kukamet Facts Pressing force max: 7,000 N Holding force max: 8,000 N Weight: 0.72 kg Thread length: 95 mm eClass: 21041718 ETIM: EC011973 Special features Horizontal base Blackened finish With hook Category: Spanner FAQ What clamping forces does the clamp provide? The clamp delivers a pressing force of 7,000 N and a holding force of 8,000 N; the Kukamet toggle latch clamp B331-4 is therefore suitable where firm restraint and repeatable closure are required. How is the clamp mounted to a fixture? Mounting is via the horizontal base; the compact foot design of the 331 allows attachment to plates or blocks with standard fasteners and supports low-profile installation. Can the engagement be adjusted to different workpiece heights? Yes, the 95 mm thread length provides adjustment of the spindle to set the exact engagement height and preload required for the application. Is the surface finish suitable for workshop environments? The blackened finish offers improved resistance to wear and surface corrosion in typical industrial and trade environments, helping to prolong service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Toggle Clamp Horizontal Base With Safety Lock, Zinc-Plated - Kukamet
Take advantage of the combination of robust clamping force, corrosion-resistant galvanised construction and a secure safety lock to keep production jigs stable and repeatable. Order the clamp directly via Metav Werkzeuge or consult our advisors for specification matching and delivery options. 351 Toggle clamp Horizontal foot mounting, safety locking — Kukamet The 351 Toggle clamp is a horizontal-foot latch clamp designed for fixed jigs and fixtures, offering a secure, repeatable hold for heavy-duty clamping tasks. Horizontal foot mounting for stable installation Safety lock prevents accidental release Galvanised steel construction resists corrosion 7,000 N clamping force for heavy-duty use Reliable holding power for demanding applications The horizontal latch is engineered to deliver consistent clamping force where repeatability matters. With a rated 7,000 N clamping force and a holding force of 8,000 N, this clamp secures workpieces under substantial load, reducing movement during machining or assembly. The mechanical design converts operator input into reliable holding power, which supports higher process stability and fewer rejects in batch production. The clear numerical ratings allow planners to match the clamp to fixture requirements and calculate safety margins. Durable construction for long service life Constructed from galvanised steel, the clamp withstands humid shop environments and occasional coolant exposure better than plain steel alternatives. The horizontal foot provides a broad, stable base for bolted installation to plates or tooling blocks, simplifying retrofit into existing fixtures. The inclusion of a hook increases application flexibility for different workpiece geometries, while a net mass of 0.815 kg keeps handling straightforward during assembly and maintenance. These characteristics reduce life-cycle costs through extended service intervals and predictable performance. Safety and operational certainty in production A mechanical safety lock prevents unexpected opening, offering an additional layer of protection when handling heavy or sensitive parts. The lock design supports safe clamping sequences in automated or manual processes and reduces the risk of accidental release during load or vibration. Clear tactile feedback at engagement ensures operators can confirm the clamp state quickly — a pragmatic feature that supports efficient throughput without compromising on workplace safety. Simple installation and quick adjustment for fixtures Integration is straightforward: the clamp includes a threaded bar with a 95 mm thread length for height adjustment and fine positioning within a jig. The mounting arrangement suits bolting to flat plates and can be adapted with simple spacers or pads for bespoke setups. The robust mechanical action requires no special maintenance tools; periodic inspection and lubrication keep the mechanism operating reliably. Technical planners benefit from the clear mechanical parameters when documenting fixtures or ordering replacement parts. For reliable fastening with the Kukamet 351 Toggle clamp and its safety lock, contact Metav Werkzeuge for technical advice, delivery options and order placement — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 351-4-L GTIN: 8680731502510 Manufacturer: Kukamet Core specifications Clamping force: 7,000 N Holding force: 8,000 N Thread length: 95 mm Weight: 0.815 kg ECLASS: 21041718 ETIM: EC011973 Materials and features Galvanised steel construction Horizontal foot mounting Safety locking mechanism Hook included Category: Spanner FAQ How much clamping force does this clamp provide? The Kukamet 351 Toggle clamp provides a rated clamping force of 7,000 N and a holding force of 8,000 N for heavy-duty fastening. Is the clamp suitable for use in humid or coolant-prone environments? Yes, the galvanised finish on the 351 latch clamp improves corrosion resistance, making it suitable for workshop environments with occasional moisture or coolant exposure. Can the clamp be adjusted in height for different workpieces? The clamp features a threaded bar with a 95 mm thread length for height adjustment and fine positioning within jigs and fixtures. Does the clamp include a safety mechanism to prevent accidental release? The 351 Toggle clamp is equipped with a mechanical safety lock that prevents unintentional opening, supporting safe handling during production. What mounting method is recommended for fixture integration? The clamp is designed for horizontal foot mounting and is fixed to tooling plates or blocks with bolts; spacers can be used to adapt to specific setup heights. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Toggle Clamp With Horizontal Base, Hook, Zinc Plated, 65mm Thread Length - Kukamet
Galvanised construction and a horizontal base deliver robust, corrosion-resistant clamping; 7000 N closing force and 8000 N holding force provide secure fixation for production fixtures; the compact 0.815 kg unit integrates easily into jigs and assembly rigs. Order the toggle clamp directly via Metav Werkzeuge or consult the specialists for application guidance. 371 light series toggle clamp — Kukamet toggle clamp with horizontal base, galvanised finish 371 light series toggle clamp is a compact lever clamp designed for horizontal mounting in fixtures and jigs, providing repeatable clamping and secure closure for assembly, welding and inspection tasks. Horizontal base for stable mounting Galvanised steel for corrosion resistance Hook-equipped for secure closure 7000 N closing force, 8000 N holding force Secure, measurable clamping performance for production use The clamp offers a clearly defined mechanical performance: a closing force of 7000 N and a holding force of 8000 N, values that ensure dependable fixation under dynamic loads. These rated forces support fast, repeatable operations on production lines and in manual assembly stations, reducing rework and downtime. As a mechanical device without electronic control, the unit provides predictable behaviour under load and can be specified where consistent mechanical retention is required. The performance data are suitable for integration into process documentation and risk assessments. Durable design for workshop and light industrial environments Constructed from galvanised steel with a horizontal base, the clamp resists corrosion while offering a flat mounting face for secure attachment to tooling plates and benches. The presence of a hook ensures positive engagement of the workpiece or fixture, preventing unintended release during handling or vibration. With a compact mass of 0.815 kg, the device minimises added load on movable fixtures and simplifies retrofitting into existing jigs. The robust surface finish and straightforward geometry support long service intervals and low maintenance demands. Practical applications and operational benefits The lever-style locking mechanism suits a wide range of tasks, including repetitive clamping in fixtures and jigs, light welding clamps, and fastening during inspection. The mechanical retention provided by this class of clamp allows rapid cycle times and hands-free locking once engaged, which aids operator efficiency and workplace ergonomics. For applications where predictable mechanical restraint matters—such as assembly, short-run machining or quality control—the clamp contributes to faster set-ups and more stable processing conditions. Identification and specification for procurement and integration Technical classification codes and identifiers facilitate procurement and ERP integration: SKU 371-4, GTIN 8682843523407, eClass 21041718 and ETIM EC011973. The clamp is supplied in the light series configuration and is particularly suited to applications requiring a horizontal mounting foot. The specified thread length 65 mm facilitates secure attachment, while the galvanised material supports general workshop environments. These details enable precise ordering and ensure compatibility with existing tooling systems. For supply or technical advice on the Kukamet 371 light series toggle clamp, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored recommendations and reliable delivery. Technical Data Article number: 371-4 GTIN: 8682843523407 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.815 kg Closing force: 7000 N Holding force: 8000 N Thread length: 65 mm Special features Material: galvanised steel Mounting: horizontal base With hook: yes Series: 371 light series Category: Clamps (Spanner) FAQ What closing and holding forces does the clamp provide? The Kukamet 371 light series toggle clamp delivers a closing force of 7000 N and a holding force of 8000 N, values intended for reliable mechanical retention in fixtures and jigs. Is the clamp suitable for use on welding fixtures? Yes; the galvanised finish and mechanical locking action make the clamp appropriate for many welding and assembly fixtures, provided the working temperatures and exposure are within standard workshop conditions. How is the clamp mounted to a tooling plate? Mounting is via the horizontal base; the supplied thread length of 65 mm allows secure bolting to plates and benches for stable installation. What material is the clamp made from? The device is made from galvanised steel, chosen for corrosion resistance and durability in general workshop environments. Which identifiers help to order the correct item? Use SKU 371-4 or GTIN 8682843523407; classification codes include eClass 21041718 and ETIM EC011973 for procurement systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000 N Vertical Base Toggle Clamp With Safety Lock, Zinc Plated, 95mm Thread Length - Kukamet
Taking advantage of proven toggle-clamp mechanics and robust corrosion resistance, this latch clamp delivers reliable, repeatable fastening with a 7,000 N clamping force and up to 8,000 N holding capacity. The zinc-plated finish and integrated safety lock ensure long service life and secure operation in jigs and fixtures. Order directly via Metav Werkzeuge or consult the team for specification matching. Kukamet Latch Clamp 312 — Zinc-plated toggle clamp with safety lock and vertical mounting foot The Kukamet Latch Clamp 312 is a zinc-plated toggle clamp designed for secure, repeatable fastening in assembly jigs, fixtures and transport closures. Zinc-plated corrosion protection Safety lock for secure holding Vertical mounting foot for compact installation 8,000 N maximum holding capacity Secure, repeatable fastening for production tasks The latch clamp combines a classic toggle mechanism with a lockable latch to provide consistent clamping action across repeated cycles. The mechanical design converts operator input into a high holding force, enabling reliable fixation of components during machining, assembly or transportation. The vertical mounting foot reduces the footprint on fixtures while maintaining accessibility, making the clamp suitable where space optimisation and repeatability are priorities. This section highlights how construction and geometry translate into dependable process performance. Built for durability and workplace safety Constructed with a zinc-plated surface finish, the clamp resists corrosion in workshop environments and keeps maintenance intervals low. The integrated safety lock prevents accidental release under vibration or impact, addressing common shop-floor safety concerns. With a rated 7,000 N clamping force and 8,000 N holding capacity, the unit is appropriate for medium-duty applications where secure closure under load is required. The use of durable materials and a secure locking feature supports operational safety and reduces risk of workpiece movement. Simple integration and clear technical fit Installation is facilitated by the 95 mm thread length, which allows straightforward adjustment of the latch point and easy integration into existing fixtures. The clamp includes a hook and the mounting arrangement is optimised for vertical-foot attachment, enabling compact positioning on panels or rails. The overall weight of approximately 0.815 kg aids handling during assembly while keeping the fixture mass low. These measurable characteristics make specification and CAD planning more predictable for production engineering teams. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet clamp into production setups or to confirm suitability for specific fixtures and loads — Metav Werkzeuge can support selection and fast supply from Emmerich. Technical Data SKU: 312-4-L GTIN: 8680731502398 Weight: 0.815 kg Material: zinc-plated Mounting: vertical foot Hook: included Safety lock: integrated Thread length: 95 mm Max clamping force: 7,000 N Max holding capacity: 8,000 N Facts Category: clamps / toggle clamps eClass: 21041718 ETIM: EC011973 SKU image available Special features Safety latch mechanism Compact vertical-foot design Zinc-plated finish for corrosion resistance Suitable for repetitive production clamping FAQ What is the maximum holding force of this latch clamp? The Kukamet Latch Clamp 312 offers a maximum holding capacity of 8,000 N, making the clamp suitable for medium-duty securing tasks in fixtures and closures. Is the clamp protected against corrosion? Yes, the clamp features a zinc-plated finish that provides corrosion resistance for workshop and assembly environments. Does the unit include a safety mechanism to prevent accidental opening? An integrated safety lock is provided on the Kukamet latch clamp 312 to reduce the risk of unintended release under vibration or impact. How is the clamp mounted in fixtures? The clamp is designed for vertical-foot mounting and includes a 95 mm thread length to allow adjustment and secure attachment to panels or rails. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Closing Clamp Horizontal Base With Hook, Stainless Steel, 95mm Thread Length - Kukamet
Robust stainless-steel construction combined with a 7 kN closing force and an 8 kN holding capacity ensures dependable clamping and repeatable results in production fixtures; order the latch clamp directly via Metav Werkzeuge or request application advice from our consultants. Kukamet 351 horizontal-foot latch clamp with hook — stainless steel, high holding force The Kukamet 351 is a horizontal-foot latch clamp designed for secure closure and repeatable clamping in jigs, fixtures and transfer systems across workshop and light-industrial environments. *Stainless-steel body for corrosion resistance *Horizontal-foot mounting for fixed-base installation *Hook closure for positive engagement *7,000 N closing force and 8,000 N holding force Durable stainless-steel construction for long service life A heavy-duty stainless-steel body delivers corrosion resistance and structural stability, making the clamp suitable for repetitive production cycles and moderate environmental exposure. The choice of stainless steel reduces maintenance needs and supports consistent clamping performance over time. For applications where material compatibility and longevity matter, the metal construction translates directly into fewer replacements and lower downtime compared with plated or painted alternatives. Secure engagement and repeatability for fixture tasks The clamp uses a hook-style closure paired with a robust toggle mechanism to provide both immediate engagement and sustained holding capacity. With a rated closing force of 7,000 N and a holding force of 8,000 N, the device secures components reliably during machining, welding or assembly operations. This level of mechanical performance supports improved process stability and helps maintain part tolerances by preventing movement under load. Flexible installation and measurable specifications Designed with a horizontal foot for fixed-base mounting, the clamp integrates into tooling plates and welded fixtures with straightforward attachment. A thread length of 95 mm enables fine adjustment of the hook position during set-up, while the compact footprint and a weight of 0.815 kg make it easy to place multiple clamps without excessive added mass. Clear numeric data allow planners to calculate fixture dynamics and ensure the clamp meets cycle and load requirements. Practical benefits for workshop and light-industrial users Incorporating this latch clamp into production tooling improves handling speed and operator confidence through positive mechanical locking and predictable release behaviour. The combination of measured holding capacity and a stainless-steel build supports higher uptime and reduced corrective work — an efficient solution where repeatability and durability are priorities. For procurement, the standardised specifications simplify integration into existing clamping systems and CAD layouts. Contact Metav Werkzeuge for a tailored order or technical guidance on mounting and application of the Kukamet 351 horizontal-foot latch clamp Technical data Article number: S351-4 GTIN: 8680731506709 ECLASS: 21041718 ETIM: EC011973 Core specifications Closing force (max): 7,000 N Holding force (max): 8,000 N Thread length: 95 mm Weight: 0.815 kg Materials & features Material: Stainless steel Mounting: Horizontal foot Hook: Yes Category: Clamp FAQ What is the maximum closing force of this clamp? The Kukamet 351 latch clamp achieves a maximum closing force of 7,000 N, providing strong engagement for a wide range of fixture tasks. Is the clamp suitable for corrosive or humid workshop environments? Yes, the stainless-steel construction of the Kukamet 351 offers enhanced corrosion resistance suitable for workshops with moderate humidity or cleaning procedures. How is the clamp mounted to a fixture plate? Mounting is by horizontal foot; the clamp is designed for fixed-base attachment to tooling plates or welded fixtures, with a 95 mm thread length for positional adjustment. Can the clamp withstand holding loads during machining operations? With a rated holding force of 8,000 N, the Kukamet 351 provides reliable retention under typical machining and assembly loads, supporting process stability. What is the item identifier for ordering and documentation? Order and reference the clamp as SKU S351-4 (GTIN 8680731506709) for accurate procurement and technical documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Closure Clamp Vertical Base With Safety Lock, Stainless Steel, Hooked Spindle 95mm - Kukamet
Reliable locking action combined with high holding and clamping forces provides secure fixture retention in repetitive production tasks; the stainless steel construction and upright mounting base reduce corrosion risk and save space on the workbench. Order the Locking toggle clamp 312 directly via Metav Werkzeuge or ask our consultants if needed. Locking toggle clamp 312 — stainless steel, 8,000 N holding force, safety lock (Kukamet) The Locking toggle clamp 312 is a lever-style latch clamp designed for secure workpiece fixation in industrial assembly, welding and jig applications, offering a compact upright mounting option and an integrated safety lock to prevent accidental release. Stainless steel construction 8,000 N holding force 7,000 N clamping force Vertical base for upright mounting Safety locking mechanism Consistent, measurable clamping performance for production use The clamp delivers defined forces for reliable repeatability in series work: a holding force of 8,000 N and a clamping force of 7,000 N, values that translate into stable part retention under load and during machining. Specified force ratings enable planners to compare fixings objectively and to select a solution that reduces rework and cycle-time variation. The lever mechanism provides rapid actuation, so fixture exchange is efficient, while the straight conversion of lever movement into clamping pressure minimises setup variability and supports automated or semi-automated processes. Built-in safety and reduced operational risk An integrated safety lock secures the clamping position and prevents unintended release during vibration or when the fixture is disturbed, which improves operator safety and protects workpieces from sudden movement. The lock also supports compliance with internal safety routines in production environments and lowers the risk of downtime caused by accidental unclamping. As a lever clamp with a latch-style arrangement, the design provides tactile feedback on engagement, simplifying visual and manual checks at assembly stages. Corrosion resistance and adaptable mounting for workshop resilience Manufactured from stainless steel, the unit resists corrosion in humid or splash-prone environments and is therefore suited to toolrooms and welding benches where longevity matters. The vertical base enables upright installation to save bench space and align with existing fixture plates, while the included hook and a 95 mm thread length offer fine adjustment of engagement distance and accommodate a variety of workpiece geometries. At 0.815 kg, the clamp is robust yet light enough for retrofitting into existing jigs without excessive added mass. For secure, repeatable clamping with a proven safety lock, request the Kukamet Locking toggle clamp 312 from Metav Werkzeuge or contact our advisers at info@metav-werkzeuge.com or +49 2822 7131930 for specification support and ordering guidance Technical Data Article number: S312-4-L GTIN: 8680731509441 Model designation: 312 Manufacturer: Kukamet ECLASS: 21041718 ETIM: EC011973 Facts Holding force: 8,000 N Clamping (pressing) force: 7,000 N Weight: 0.815 kg Thread length: 95 mm Special features Material: stainless steel Mounting: vertical base Safety locking mechanism Hook included Lever clamp design FAQ What clamping and holding forces does the clamp provide? The clamp achieves a clamping force of 7,000 N and a holding force of 8,000 N, making the Kukamet locking toggle clamp 312 suitable for demanding retention tasks. Is the clamp suitable for corrosive or humid environments? Yes, the body is made from stainless steel, so the clamp is resistant to corrosion and appropriate for environments such as welding benches and humid production areas. How is the clamp mounted to a fixture? The clamp uses a vertical base for upright mounting and includes a hook with a 95 mm thread length for adjustable engagement and alignment in fixture plates. Does the clamp prevent accidental release during vibration? The integrated safety locking mechanism secures the lever in the clamped position, reducing the risk of unintended release under vibration or external disturbance. What is the item code for ordering and traceability? Order or reference the component using article number S312-4-L for procurement and inventory tracking. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Horizontal Clamp With Safety Lock, Hook, 95mm Thread Length, Blackened Steel - Kukamet
Take advantage of a compact, high‑force clamp with an integrated safety lock and a horizontal mounting foot to secure fixtures reliably. Benefiting from an 8,000 N holding capacity and a corrosion‑resistant black oxide finish, this clamp supports efficient, repeatable production—order directly via Metav Werkzeuge or consult our technical team for application advice. Kukamet Toggle Latch Clamp 351 (B351-4-L) — Horizontal base, Safety lock A toggle latch clamp 351 designed for heavy‑duty fixturing and assembly work, offering a horizontal mounting foot and an integrated safety lock for secure, repeatable clamping. Horizontal base for stable mounting Integrated safety lock for secure holding Holding force up to 8,000 N Black oxide finish for corrosion resistance Secure high‑force clamping for robust fixtures The toggle latch clamp delivers a holding force of 8,000 N and a pressing force of 7,000 N, providing the mechanical reliability required for demanding jigs and fixtures. The lever action converts operator motion into powerful, sustained clamping pressure; this means shorter setup times and fewer re‑adjustments during machining or assembly. The built‑in hook and a 95 mm thread engagement allow integration into a range of fixture geometries, making the device suitable where firm, vibration‑resistant holding is essential. Safer, repeatable operation reduces downtime An integrated safety lock prevents accidental release and supports consistent process quality by keeping the clamp engaged under shock or vibration. The horizontal base design ensures a low profile and straightforward alignment on machine tables or welded fixtures, while the latch mechanism enables quick manual actuation. These features combine to deliver reproducible clamping cycles that protect components and tooling, improving throughput in batch production or repetitive assembly tasks. Compact, durable construction for everyday workshop use Finished in a black oxide finish, the clamp resists corrosion and shows fewer visible wear marks, extending service life in workshop environments. With a compact mass of 0.815 kg, the unit is easy to handle during installation yet robust enough for heavy‑duty use. The combination of a lever clamp mechanism, hook attachment and a sturdy mounting foot results in a space‑efficient solution that maintains clamping integrity even under frequent operation, reducing the need for replacements and unplanned maintenance. Choose Kukamet quality for dependable clamping — contact Metav Werkzeuge for procurement and tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: B351-4-L GTIN: 8680731508574 SKU: B351-4-L Facts Weight: 0.815 kg Thread length: 95 mm Max pressing force: 7,000 N Max holding force: 8,000 N Special features Mounting: horizontal base Safety lock: integrated Finish: black oxide finish With hook: yes FAQ What is the maximum holding force of this clamp? The Kukamet toggle latch clamp 351 (SKU B351-4-L) provides a maximum holding force of 8,000 N and a pressing force of 7,000 N. Is the clamp suitable for use on welded fixtures and jigs? Yes, the horizontal base and hook attachment make the clamp well suited for welded fixtures, jigs and machine table applications where a low profile and stable mounting are required. Does the clamp include a safety feature to prevent accidental release? The product includes an integrated safety lock that secures the latch and prevents unintended opening under vibration or shock. What surface treatment does the clamp have to resist corrosion? The clamp is supplied with a black oxide finish, offering improved resistance to surface corrosion and a durable appearance for workshop environments. What are the typical applications for this toggle latch clamp? Typical uses include assembly fixturing, holding workpieces during welding, and securing components in production and inspection fixtures where repeatable clamping is critical. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Horizontal Toggle Clamp With Safety Lock, Hardened Black Finish, 65mm Thread Length - Kukamet
Take advantage of a compact, lightweight clamp that combines a 7,000 N clamping force with an 8,000 N holding force and an integrated safety lock for dependable operation in light-duty fixtures; order the Kukamet B371-4-L via Metav Werkzeuge or contact our consultants for application advice. Kukamet B371-4-L toggle latch clamp — horizontal base with safety lock The B371-4-L is a compact toggle latch clamp for light-duty fixturing, featuring a horizontal base, hook latch and a mechanical safety lock for vibration-resistant holding. Horizontal base for secure mounting Safety lock for vibration resistance Hook latch for positive engagement Up to 8,000 N holding force Reliable performance through proven clamping values The clamp delivers a consistent clamping force of 7,000 N and a maximum holding force of 8,000 N, values that translate into repeatable fixture results and reduced rework. Its low mass of 0.815 kg and compact design make it suitable for fixtures where space is limited and cycle times matter. Specified forces refer to static conditions under correct installation; the numeric ratings support objective selection when comparing clamps or designing fixture layouts, improving throughput and lowering scrap rates. Fast engagement with secure, fail‑safe locking Designed for quick manual operation, the latch provides rapid engagement and a positive hook connection that mates securely with a receiving plate. The integrated safety lock prevents unintended release under vibration or shock, which is particularly valuable in machining centres and transfer lines where workpieces are exposed to dynamic loads. The threaded spindle with thread length 65 mm allows fine adjustment of clamp travel and contact pressure, enabling the clamp to be set for accurate workpiece locating without additional shims. Durable finishing and straightforward integration Finished in a blackened finish for corrosion resistance and low reflectivity, the clamp belongs to a light series engineered for frequent use in assembly jigs and inspection fixtures. The horizontal base enables flush mounting to flat surfaces or fixture plates and simplifies alignment during assembly. As a mechanical device with a hook latch and safety lock, maintenance is limited to periodic lubrication and visual inspection, supporting long service intervals and predictable machine availability. Request application guidance from Metav Werkzeuge to specify the Kukamet B371-4-L for your fixtures; technical advice is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: B371-4-L GTIN: 8680731509786 Manufacturer: Kukamet Series: 371 light series Category: Spanner Core specifications Clamping force: 7,000 N Holding force: 8,000 N Thread length: 65 mm Weight: 0.815 kg eClass: 21041718 ETIM: EC011973 Design & features Material: blackened finish Mounting: horizontal base Hook latch included Safety lock fitted With hook FAQ What holding and clamping forces does this clamp provide? The Kukamet B371-4-L toggle latch clamp has a clamping force of 7,000 N and a holding force of 8,000 N when installed and adjusted correctly. Is the clamp suitable for fixtures subject to vibration? Yes. The integrated safety lock prevents accidental release, making the clamp suitable for applications with moderate vibration and dynamic loads. How is the clamp mounted and adjusted? The unit mounts on a horizontal base plate; the threaded spindle (thread length 65 mm) allows adjustment of travel and contact pressure for precise locating. What maintenance is required? Maintenance is minimal: periodic lubrication, inspection of the hook and safety lock, and ensuring the mounting screws remain secure will preserve function and longevity. Can the clamp be used where space is limited? Yes. The light series design and compact footprint, combined with a weight of 0.815 kg, make it well suited to confined fixtures and tight layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7000N Toggle Clamp With Vertical Foot, Safety Locked, Hooked, 95mm Thread Length - Kukamet
Robust holding capacity and an integrated safety lock provide reliable, repeatable clamping; the vertical-foot mounting and hook add mounting flexibility for jigs and fixtures. Order the Kukamet Locking Lever Clamp 312 via Metav Werkzeuge or consult our specialists for application advice. Kukamet Locking Lever Clamp 312 — vertical-foot mounting, integrated safety lock Kukamet Locking Lever Clamp 312 is a compact lever clamp engineered for secure workpiece retention in fixtures and jigs where a vertical base is required. Vertical-foot mounting for upright installation Integrated safety lock for secure engagement Holding force up to 8,000 N Blackened finish for corrosion resistance Secure clamping for repeatable production The Kukamet Locking Lever Clamp 312 delivers dependable clamping with a rated holding force of 8,000 N and a maximum pressing force of 7,000 N, making it suitable for demanding assembly and welding fixtures. The lever mechanism is designed to convert operator movement into a consistent clamp force, reducing variation between cycles; this translates into fewer rejects and more predictable production throughput. The built-in safety lock prevents accidental release during handling, supporting safe operation in busy workshop environments while maintaining fast clamp actuation. Flexible mounting and straightforward integration Vertical-foot mounting provides a compact footprint for upright installation on plates and tooling blocks, while the supplied hook and a 95 mm thread length enable straightforward height and position adjustment. The clamp's mounting arrangement allows it to be used in tight assemblies where horizontal clamps would interfere with tool paths. For engineers specifying fixtures, the combination of a vertical base and an adjustable threaded connection simplifies integration into existing modular systems and reduces setup time during changeovers. Durable finish and compact handling Finished in a blackened surface treatment, the clamp resists corrosion and wear in workshop atmospheres, extending maintenance intervals. At approximately 0.815 kg the unit provides a balance between solidity and ease of handling during fixture assembly. The compact lever clamp design conserves space on fixtures and permits close positioning of multiple clamps where uniform clamping pressure is required. For routine upkeep, the mechanically simple construction allows inspection and lubrication without specialised tools, which supports continuous operation with minimal downtime. Speak to Metav Werkzeuge about the Kukamet locking lever clamp B312 for tailored fixture recommendations; technical advice and ordering assistance are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B312-4-L GTIN: 8680731508369 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.815 kg Thread length: 95 mm Max pressing force: 7,000 N Max holding force: 8,000 N Special features Vertical-foot mounting Integrated safety lock With hook Blackened finish Category: Spanner FAQ What materials can this clamp be used with? The clamp is suitable for general fixture use; the Kukamet locking lever clamp 312 is a mechanical clamping device commonly applied to metal and composite workpieces in jigs and assembly stations. How is the clamp secured to a fixture plate? The unit mounts via its vertical foot and threaded connection; the 95 mm thread length provides adjustment range for setting clamp height and position when installing the Kukamet locking lever clamp B312 (SKU B312-4-L). Does the clamp prevent accidental opening during operation? Yes, the integrated safety lock secures the lever in the engaged position so the locking device remains fixed under load until deliberately released. Is special maintenance required for the lever mechanism? Routine inspection and light lubrication are normally sufficient; the simple mechanical design of the lever clamp reduces maintenance complexity and supports long service intervals. Can several clamps be arranged closely together on a fixture? The compact vertical-foot design allows multiple units to be positioned in proximity, enabling uniform clamping across parts in confined fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700mm Chip Collector With Adjustable Arm, 120x70mm Base, 0.7kg Capacity - Vertex
Take advantage of the combination of precise chip control, a compact footprint and straightforward positioning to keep bench work uninterrupted; order the unit directly via Metav Werkzeuge or consult the specialists for compatibility advice. VCC-17A Swarf Collector – adjustable arm, 700 mm reach (Vertex) The VCC-17A swarf collector with adjustable arm is a bench-mounted solution for capturing machining chips and light parts in small workshops and inspection stations. Adjustable arm with 700 mm reach Compact 120 × 70 mm base footprint Accepts parts up to 0.7 kg Lightweight design, approx. 2 kg Improve bench cleanliness with precise chip capture The adjustable arm permits targeted positioning of the collection point, so deposits are gathered where they form. This focused control reduces time spent on clearing work surfaces and keeps measuring tools free from contamination. The adjustable arm and 700 mm reach enable flexible placement for milling, turning or deburring tasks, while the ability to handle parts up to 0.7 kg supports common small-component workflows. The result is a measurable improvement in process continuity and a reduction in lost minutes between operations. Minimal footprint that supports measurement accuracy A narrow base of 120 × 70 mm preserves valuable bench space and allows the collector to be set close to gauges and fixtures without obstructing access. At roughly 2 kg, the assembly is easy to reposition while remaining stable during routine use. This compact arrangement supports repeatable measurement work and inspection sequences by keeping the immediate workspace tidy, which is particularly relevant when handling precision tools such as a precision caliper. Simple integration into existing workstations The straightforward design of the collector facilitates rapid integration into established benches and jigs. The articulated arm provides fine adjustment for alignment with cutting or grinding points, enabling containment of swarf at source and lowering the risk of stray particles affecting delicate components. By directing chips away from fixtures and measuring instruments, the device supports consistent quality control and fewer interruptions for cleaning, contributing directly to operational efficiency. A reliable procurement choice from a specialist supplier Sourced from Vertex, the unit complements a pragmatic procurement approach that favours durable, easy-to-deploy solutions. Metav Werkzeuge acts as a quality filter for the European market, combining broad product choice with dependable logistics from Emmerich. For workshops and trade buyers seeking a small, effective swarf management tool, the collector provides a pragmatic balance of reach, compactness and handling capability that supports daily production and inspection routines. Contact Metav Werkzeuge for ordering details or expert guidance on integrating the Vertex VCC-17A into existing workstations Technical data SKU: VCC-17A GTIN: 4061905083723 Manufacturer: Vertex Facts Length: 700 mm Base footprint: 120 × 70 mm Weight: 2 kg Suitable for parts up to 0.7 kg Special features Adjustable arm Bench-mounted swarf collector Brand: Vertex FAQ What is the maximum part weight the collector can handle? The collector accepts parts up to 0.7 kg, which suits common small components in assembly and inspection tasks. How much reach does the arm provide? The articulated arm offers a reach of 700 mm, allowing flexible positioning over machining or measuring areas. Is the unit suitable for use near precision measuring tools? Yes, the compact 120 × 70 mm base and targeted positioning help keep swarf away from precision tools such as a precision caliper, supporting consistent measurements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
700N Hold Force 550N Clamping Force Vertical Clamp With Metal Handle, Zinc Plated - Kukamet
Secure, repeatable clamping is achieved by combining a zinc-plated body with a metal handle and a compact horizontal foot; the result is reliable fixturing with a holding force of 700 N and a clamping force of 550 N. Order directly via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 211 — Kukamet zinc-plated clamp with metal handle The Vertical toggle clamp 211 is a compact horizontal-base lever clamp designed for fast, repeatable workpiece securing in assembly, welding and light machining applications. Vertical toggle clamp »211« by Kukamet Zinc-plated steel construction Metal handle for robust handling Holding force 700 N, clamping force 550 N Secure, measurable clamping that speeds production The clamp delivers a defined holding force of 700 N and a clamping force of 550 N, providing quantifiable fixation for jigs and fixtures. These values mean fewer rejected parts and shorter set-up times when replacing or reloading workpieces. The mechanical toggle action locks the arm positively, reducing bounce and ensuring repeatability in serial tasks. For shops seeking predictable throughput, the measurable forces support process planning and quality control. Compact base and adjustable spindle for flexible fixture layouts A horizontal base allows mounting in tight arrangements or onto existing tooling plates without obstructing adjacent fixtures. The included M4x25 pressure spindle enables fine height adjustment to accommodate different stock thicknesses and to set pre-load precisely. At only 0.08 kg, the component adds minimal inertia to robotic end‑effectors or modular fixturing systems, making it suitable for compact clamping arrays where space economy and precise positioning matter. Durable finish and ergonomic handling for long service life Constructed from zinc-plated steel with a metal handle, the clamp resists corrosion in workshops and maintains consistent function under frequent use. The robust grip improves lever control during repetitive cycles, lowering operator fatigue and supporting safe operation. The straightforward mechanism requires minimal maintenance and, when integrated into a workholding solution, contributes to long-term operational reliability and lower total cost of ownership. Contact Metav Werkzeuge for tailored technical advice or to secure the Kukamet vertical toggle clamp 211 for your production setup; reliable supply and consultation are available from our Emmerich location Technical data SKU: 211-0-M GTIN: 8680731501100 ECLASS: 21041717 ETIM: EC011973 Facts Holding force max: 700 N Clamping force max: 550 N Pressure spindle: M4x25 Weight: 0.08 kg Special features Zinc-plated material Metal handle Horizontal foot for mounting Category: Toggle clamp FAQ What holding and clamping forces does this clamp provide? The Kukamet vertical toggle clamp 211 offers a holding force of 700 N and a clamping force of 550 N, values suitable for light to medium fixturing tasks. How is the clamp mounted on a fixture? Mounting is via the horizontal foot; the clamp is designed to be fastened flat to tooling plates or fixture bases for stable positioning. Can the clamp accommodate different workpiece thicknesses? Yes, adjustment is possible via the M4x25 pressure spindle, allowing the clamping height to be fine-tuned for varying stock. What material and finish does the clamp have? The clamp is made from zinc-plated steel and features a metal handle for improved durability and resistance to workshop environments. Is the clamp suitable for automated or robotic fixtures? Its low weight (0.08 kg) and compact horizontal base make the clamp suitable for integration into modular fixtures and some automated setups where a mechanical toggle action is acceptable. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700N Hold Force 550N Thrust Rod Clamp Horizontal Foot, Blackened - Kukamet
Take advantage of a compact, robust clamp that combines a lightweight construction with a horizontal base for secure fixture mounting; the combination of 700 N holding force and 550 N pressing force supports consistent production processes. Order directly via Metav Werkzeuge or consult the team for specification matching and delivery options. Push‑rod clamp 511 — Kukamet horizontal‑base lever clamp with 700 N holding force The Push‑rod clamp 511 is a compact lever clamp designed for horizontal mounting in fixtures and jigs, offering dependable holding and pressing capacity for small‑scale assembly and machining tasks. Compact horizontal base mounting 700 N holding force rating 550 N maximum pressing force Blackened finish for corrosion resistance Very low weight at 0.092 kg Robust clamping power for compact fixtures The lever‑style clamp delivers a clear technical advantage: a 700 N holding force and a 550 N pressing force, providing stable workpiece retention under moderate loads. This performance is particularly relevant for repetitive assembly operations and small machining setups where a reliable hold reduces rework and cycle time. The push‑rod mechanism converts lever movement into axial force, enabling consistent clamping strokes that are easy to integrate into fixture designs. The combination of measured force values and a compact footprint ensures predictable behaviour in automated or manual workstations. Easy integration and secure mounting Featuring a horizontal base and a standard M4×25 spindle connection, this clamp is designed for straightforward installation in existing jigs and workholding plates. The horizontal mounting orientation minimises interference with tooling and allows for low‑profile fixture layouts. The low mass—0.092 kg—reduces added inertia on moving fixtures and simplifies positioning during assembly. For engineers specifying clamps for compact tooling, the geometry and mounting standard make the unit suitable where space is limited but reliable retention is required. Durable finish and material considerations The component is supplied blackened to enhance surface resistance against corrosion and wear in standard workshop environments. This finish supports longevity in regular use without adding significant bulk or weight. The lever design, constructed for repetitive engagement, benefits from the protective treatment to maintain consistent sliding and contact characteristics over time. Where visual uniformity and basic surface protection are required, the treated surface reduces the need for frequent replacement and supports predictable service life. Practical advantages for production and maintenance A straightforward mechanical clamp with a lever action reduces maintenance complexity compared with pneumatic or hydraulic alternatives. The simple construction limits potential failure modes and facilitates quick replacements in modular fixtures. The measured force ratings and standard attachment method deliver an efficient solution for production lines seeking cost‑effective holding devices that require minimal upkeep. The compact design and light weight additionally contribute to easier handling and reduced fixture load during assembly changes. For compact fixtures that demand reliable 700 N holding capability, contact Metav Werkzeuge for tailored advice and supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: B511-0 GTIN: 8682843522516 Manufacturer: Kukamet Category: Spanner ETIM: EC011973 ECLASS: 21041716 Facts Weight: 0.092 kg Holding force (max): 700 N Pressing force (max): 550 N Spindle / contact screw: M4×25 Special features Horizontal base mounting Blackened finish Lever clamp / push‑rod action No additional special feature specified FAQ What is the main function of this clamp? The Push‑rod clamp 511 is a lever‑operated holding device intended for horizontal mounting in fixtures and jigs to secure workpieces with defined holding and pressing forces. Can the clamp be mounted in custom fixtures? Yes, the horizontal base and M4×25 spindle make the clamp suitable for integration into bespoke fixtures and workholding plates. What materials and finish are used? The clamp is supplied with a blackened finish to improve surface resistance; the construction supports regular workshop use with enhanced durability. Is the holding force sufficient for light machining tasks? With a 700 N holding force and 550 N pressing force, the unit is designed for light to moderate retention requirements typical in assembly and small machining operations. Where to get technical support or order replacements? Technical advice and replacement supply are available through Metav Werkzeuge; consult the contact details provided for specification support and ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700N Holding Force 550N Clamping Force Vertical Clamp, Zinc Plated - Kukamet
Reliable vertical clamping with measurable forces and corrosion-resistant finish ensures repeatable set-ups and reduced fixture time; use the combination of clamping force 550 N, holding force 700 N and galvanised construction for robust, light-duty production tasks. Order the clamp via Metav Werkzeuge or consult their specialists for precise application advice. Vertical toggle clamp 212 by Kukamet — vertical foot mounting, 550 N clamping force The Vertical toggle clamp 212 is a compact vertical clamping device designed for secure workpiece retention on jigs and fixtures in light industrial and workshop environments. Vertical foot mounting Clamping force 550 N Holding force 700 N Galvanised steel construction Consistent force where it matters The 212 delivers a clearly defined clamping force of 550 N and a holding force of 700 N, values that translate directly into predictable fixture behaviour and reduced rework. These numeric ratings allow planners to compare clamping performance objectively and to design fixtures with known safety margins. The mechanism is a conventional toggle design, which locks reliably under load and releases quickly when required; the combination of measured force and simple mechanics supports efficient cycle times and repeatable results. Easy integration and fine adjustment Mounting is via a vertical foot, which simplifies installation on platen surfaces and reduces vertical profile compared with horizontal base variants. Fine adjustment is achieved through the M4×25 pressure spindle, allowing small variations in contact height without replacing parts. At a weight of 0.072 kg, the unit adds negligible mass to assemblies, which assists in jig balancing and reduces wear on support structures. The galvanised finish protects the surface in everyday workshop environments and minimises maintenance needs. Suitable for workshop and light-production tasks Made from galvanised material and supplied as a compact toggle clamp, the item is intended for repetitive clamping duties where space and reliability are priorities. The device is well suited to fixtures, small-batch assembly, and training workshops where robust, low-complexity components are preferred. As a simple mechanical clamping solution, it removes the need for complex pneumatics in many applications and supports a pragmatic approach to fixture design. Choose the Kukamet 212 vertical toggle clamp for dependable vertical clamping and contact Metav Werkzeuge for application guidance and reliable supply from their Emmerich facility. Technical data Article number: 212-0 GTIN: 8680731505016 Manufacturer: Kukamet Facts Clamping force max: 550 N Holding force max: 700 N Weight: 0.072 kg Pressure spindle: M4×25 Special features Material: galvanised Mounting: vertical foot Arm: not applicable Particular feature: none FAQ What clamping and holding forces does the clamp provide? The 212 vertical toggle clamp provides a clamping force of 550 N and a holding force of 700 N, allowing for reliable retention in light-duty fixtures. How is the clamp mounted? The unit is designed for vertical foot mounting, which facilitates integration into platen-mounted jigs and fixture plates. Is fine adjustment possible on the clamp? Yes, adjustment is performed via the M4×25 pressure spindle, enabling precise contact-height settings. What material and surface protection does the clamp have? The clamp is manufactured in galvanised material, offering corrosion resistance suitable for standard workshop conditions. Is the clamp suitable for heavy industrial applications? The clamp is intended for workshop and light-production tasks; its specified forces and compact form factor are optimised for small to medium fixtures rather than heavy industrial presses. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700N Holding Force Vertical Clamp 550N Clamp Force Horizontal Base Blackened Steel - Kukamet
Take advantage of the 550 N clamping force and 700 N holding capacity in a compact, lightweight package to secure repetitive workholding operations reliably; order the Vertical Clamp via Metav Werkzeuge or consult the Metav team for integration advice and supply from Emmerich. Vertical Clamp 211 – vertical toggle clamp, 550 N clamping force (Kukamet) The Vertical Clamp 211 is a compact vertical toggle clamp with a horizontal base, designed for fixture and jig workholding in light to medium industrial applications. 550 N clamping force 700 N holding capacity Horizontal base for fixture mounting M4×25 adjustable pressure spindle Black oxide finish, weight 0.072 kg Reliable clamping that keeps production moving The Vertical Clamp 211 delivers repeatable clamping force of 550 N and a holding capacity of 700 N, providing measurable security for short-cycle operations. The toggle mechanism converts manual lever action into a stable clamping lock, reducing setup time and the risk of slippage during machining or assembly. By using a defined clamping force, process planners gain predictability: tool wear and part deformation are easier to control, which supports higher throughput and consistent quality across batches. Space-saving design for easy integration into fixtures Engineered with a horizontal base, the unit integrates directly into jigs and modular fixture plates without complex adapters. At just 0.072 kg, the device is exceptionally lightweight, easing positioning and reducing added mass on moving assemblies. The compact footprint allows multiple clamps to be installed closely for distributed holding points, enabling even pressure distribution and minimising part distortion. This practical design supports efficient fixturing layouts and quicker changeovers on production lines. Adjustable contact and resilient finish for industrial use The clamp features an M4×25 adjustable pressure spindle, enabling fine tuning of contact height and pre-load to suit varied workpiece geometries. The black oxide surface treatment provides basic corrosion resistance and a subdued appearance that resists marking sensitive parts. Constructed as a lever-style toggle clamp, it requires no additional arm attachment and is intended for straightforward mechanical operation and low-maintenance routines, offering reliability across repetitive cycles while keeping handling intuitive for operators. For dependable fixture work, choose the Kukamet Vertical Clamp 211—contact Metav Werkzeuge in Emmerich for technical guidance and reliable supply at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: B211-0 GTIN: 8682843522233 SKU: B211-0 Manufacturer: Kukamet Facts Clamping force max: 550 N Holding force max: 700 N Weight: 0.072 kg Pressure spindle: M4×25 ECLASS: 21041717 ETIM: EC011973 Special features Horizontal base mounting Black oxide finish Lever-style toggle clamp No swing arm (not applicable) No additional special features FAQ What maximum clamping force does this clamp provide? The Vertical Clamp 211 provides a maximum clamping force of 550 N and a holding capacity of 700 N for stable fixation during machining and assembly. How is the clamp mounted to a fixture? Mounting is via a horizontal base, designed for direct installation into fixture plates and jigs used in production setups. Is the contact pressure adjustable? Yes, the contact is adjustable via an M4×25 pressure spindle to set the required pre-load and height for different workpieces. What is the unit weight and how does this affect fixtures? The clamp weighs 0.072 kg, which minimises added mass on moving fixtures and facilitates compact, high-density fixturing arrangements. Does the clamp have a corrosion-resistant finish? The unit is supplied with a black oxide finish that offers basic corrosion protection and a low-marking surface suitable for many workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
700x700mm Precision Indexing Table 1°/5° Readout Three-Point Clamping 20mm T-Slot 3200 Kgs Hold Height 220mm - Vertex
Robust construction and a high clamping force provide a stable platform for heavy machining; precise 1°/5° indexing and a generous 700×700 mm work surface enable fast, repeatable setups. Order the VIT-700-5 directly via Metav Werkzeuge or consult our specialists for application-specific configuration. VIT-700-5 Precision Indexing Table — 700×700 mm work surface, 3,200 kg clamp force (Vertex) The VIT-700-5 is a precision indexing table designed for machining centres and rotary fixtures, offering repeatable stepwise rotation for heavy workpieces and robust fixturing. 700×700 mm worktable surface 3,200 kg clamp force for heavy workpieces Bi‑directional rotation for flexible indexing 1° or 5° indexing graduations Stable platform for heavy machining The VIT-700-5 combines a 700×700 mm table with a substantial mass of 600 kg, producing a low‑vibration base that supports consistent cutting results. The high 3,200 kg clamp force secures large or asymmetrical components during heavy cuts, reducing chatter and improving surface finish. For production environments where stability and tool life matter, the unit’s mass and clamping capacity directly translate into fewer rejects and longer uninterrupted cycles. Accurate, repeatable indexing for production work Engineered for repeatable angular positioning, the device offers selectable 1°/5° indexing and is specified to accuracy class 3, which supports precise stepwise operations and fixture repeatability. This level of control simplifies multi‑operation sequences and reduces setup times by eliminating manual reorientation. Clear graduations and defined indexing steps make the table suitable for batch machining and serial production where reproducibility is critical. Flexible integration and straightforward fixturing Integration into existing machining cells is facilitated by bi‑directional rotation, a T‑slot 20 mm table pattern and a compact 220 mm height that maintain compatibility with a wide range of fixtures and clamping systems. The T‑slots allow secure bolting of custom plates or modular fixtures, while clockwise and counterclockwise rotation supports both conventional and specialised machining routines. The result is a versatile rotary axis that adapts to different setups without extensive modification. Built for reliable throughput and long service life Manufactured by Vertex, the unit is intended for continuous workshop use and engineered to withstand demanding machining schedules. The combination of robust construction and precise indexing reduces the need for frequent readjustment and streamlines workflow planning. Supplied through Metav Werkzeuge, customers gain access to a European distribution hub that prioritises availability and delivery reliability, supporting smoother procurement and faster integration into the production line. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the VIT-700-5 into the production line and on delivery and fixturing options. Technical data Article number: VIT-700-5 GTIN: 4061905091681 Manufacturer: Vertex ECLASS: 36600310 Facts Table dimensions: 700×700 mm Height: 220 mm Weight: 600 kg Clamping force: 3,200 Kgs T‑slot width: 20 mm Indexing gradations: 1° or 5° Accuracy class: 3 Special features Rotates clockwise and counterclockwise Suitable for heavy workpiece machining Robust construction for industrial use Large table for versatile fixturing FAQ What table size does the VIT-700-5 offer? The VIT-700-5 features a 700×700 mm work surface suitable for medium to large fixtures and assemblies. How precise is the indexing on this table? Indexing is available in 1° or 5° steps and the unit is specified to accuracy class 3, providing repeatable angular positioning for production tasks. What clamping capacity does the table provide? The table delivers a clamping force of 3,200 kg, designed to secure heavy workpieces during aggressive machining. Can the table rotate in both directions? Yes, the worktable rotates both clockwise and counterclockwise, enabling flexible machining strategies and easier sequence planning. Which features aid fixture mounting? The table includes T‑slots of 20 mm and a compact 220 mm overall height, facilitating direct mounting of custom plates and modular fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
700x700mm Precision Indexing Table 1°/5° Readout, 20mm T-Slot, 3200 Kgs Clamping Force, 220mm Height - Vertex
Take advantage of robust clamping, a spacious 700 x 700 mm table and reliable indexing accuracy to keep setups stable and repeatable in demanding machining and inspection tasks. Order the VIT-700-1 precision indexing table directly via Metav Werkzeuge or ask our consultants if needed. VIT-700-1 Precision Indexing Table by Vertex — 700 x 700 mm, 3,200 Kgs clamping force A VIT-700-1 Precision Indexing Table engineered for dependable rotational positioning and heavy clamping in machining, fixture building and inspection applications 700 x 700 mm rotary table top 3,200 Kgs clamping force Indexing steps 1° or 5° 20 mm T-slots for secure fixturing Consistent positioning that reduces scrap and setup time The VIT-700-1 delivers defined angular indexing in 1° or 5° increments, ensuring repeatable rotational positioning for serial machining and inspection routines. Indexing means the table can be locked at predetermined angular steps; this simplifies multi-face machining and reduces the need for manual re‑measuring. The combination of a large working surface and precise indexing supports faster cycle times and fewer reworks, which translates into measurable productivity gains on the shop floor. Heavy-duty clamping and stable machining conditions With a clamping force of 3,200 Kgs and a substantial mass of 600 kg, the unit provides exceptional rigidity under load. The mass and clamping capacity minimise vibration and workpiece movement during aggressive cuts, improving surface finish and tool life. The top includes 20 mm T-slots, enabling secure fixture mounting and flexible workholding; robust fixturing reduces downtime caused by repositioning and increases confidence when machining hard or irregular components. Size and compatibility for versatile workshop integration The generous 700 x 700 mm table area and a height of 220 mm make the indexing unit suitable for a wide range of milling machines and inspection benches where a stable platform is required. The table rotates clockwise and counterclockwise, offering bi-directional operation for complex fixture sequences and clearance-critical setups. Large-format capability allows multiple jigs or larger assemblies to be mounted simultaneously, consolidating work steps and improving throughput for batch production. Practical benefits for everyday workshop use Accuracy class 3 provides a balance between precision and industrial robustness for many production environments. The unit’s construction and indexing features reduce measurement uncertainty and support reproducible process parameters, which is especially valuable when producing repeat orders or when traceable positioning is required. Fewer manual adjustments and secure clamping lead to lower operator fatigue and a clearer quality record for manufactured parts. Contact Metav Werkzeuge in Emmerich for specialist advice on integrating the Vertex VIT-700-1 into production and to arrange delivery and technical coordination Technical Data SKU: VIT-700-1 GTIN: 4061905091636 Manufacturer: Vertex ECLASS: 36600310 Facts Table size: 700 x 700 mm Height: 220 mm Weight: 600 kg Clamping force: 3,200 Kgs Accuracy: class 3 T-slot width: 20 mm Indexing steps: 1° or 5° Special features Rotates clockwise and counterclockwise 20 mm T-slots for fixturing Large-format top suitable for complex jigs Heavy construction for vibration damping FAQ What indexing increments are available? The VIT-700-1 offers 1° or 5° indexing increments for defined rotational positioning. Is the table suitable for heavy machining operations? Yes. The table’s mass (600 kg) and 3,200 Kgs clamping force make the VIT-700-1 suitable for heavy-duty machining where rigidity is required. Can fixtures be mounted directly to the table top? The table includes 20 mm T-slots, enabling direct mounting of fixtures, clamps and modular fixturing systems. Does the table rotate in both directions? Yes. The rotary top operates clockwise and counterclockwise, supporting flexible sequencing and clearance management. What accuracy can be expected for repeat positioning? The unit is specified to accuracy class 3, providing repeatable positioning suitable for many production and inspection tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com