Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
6mm Chuck Key S 2 A With DIN Gear - RÖHM
Take advantage of a compact, gear-type design with DIN-toothed gearing and a precise 6 mm drive pin to ensure secure engagement and reliable chuck adjustments; order directly via Metav Werkzeuge or contact our consultants for guidance. Drill chuck key S 2 A — gear-type, DIN gearing — RÖHM The drill chuck key S 2 A is a gear-type key for tightening and loosening keyed drill chucks, made for workshop and industrial use Robust DIN-toothed gearing for secure engagement S 2 A key size for standard keyed chucks 6 mm drive pin for precise engagement Secure, repeatable engagement for keyed chucks The gear‑type key delivers a stable mechanical connection between the hand tool and the chuck, thanks to the DIN‑toothed gearing that prevents slippage under torque. For production environments and maintenance benches where repeatable clamping is essential, this design reduces the risk of loose drills and minimises downtime. The construction focuses on straightforward function: reliable transfer of hand force to chuck teeth for consistent tightening and loosening cycles. Compact dimensions that suit workshop routines With its S 2 A designation and a 6 mm drive pin, the key fits common keyed chucks found on drills and bench machines. The modest size means the tool is easy to store in tool drawers and quick to retrieve during changeovers. The straightforward geometry facilitates access in confined setups, so adjustments can be made fast without awkward tool handling. The result is a small investment that supports smoother workflow and faster tool changes. Practical durability and low maintenance The gear engagement and simple mechanical design require little upkeep. The key’s interface is designed to withstand regular use while maintaining accurate meshing; cleaning any bruising or debris from the teeth and a light corrosion‑preventative treatment are usually sufficient to prolong service life. Such low maintenance keeps total operating effort down and supports operational efficiency across routine machining or repair tasks. Compatibility and purchasing confidence This gear-type key matches standard keyed chucks and is identifiable by its S 2 A size and DIN gearing, offering clear compatibility cues for procurement and inventory. Supplied as a single unit, it integrates easily into parts bins and tool sets. Purchasing through Metav Werkzeuge ensures access to technical advice and a consistent supply chain that many workshops trust for precision tools and accessories. Order the RÖHM gear‑type drill chuck key S 2 A through Metav Werkzeuge for secure chuck handling — for questions or bespoke advice contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832192NW Label: Drill chuck key S 2 A TECWERK Product type: Gear‑type drill chuck key Manufacturer: RÖHM UID: 2000832192NW Facts Key size: S 2 A Drive pin diameter: 6 mm Packaging unit: 1 Special features DIN‑toothed gearing Gear‑type design for keyed chucks TECWERK designation in label FAQ What chuck types is this key suitable for? The gear‑type drill chuck key S 2 A is intended for keyed drill chucks that accept an S 2 A key size, providing mechanical engagement via DIN‑toothed gearing. How does the DIN gearing benefit workshop use? DIN‑toothed gearing on the key ensures consistent meshing with the chuck teeth, reducing slippage and enabling repeatable tightening and loosening during routine operations. Is the 6 mm drive pin a common standard? Yes, the 6 mm drive pin diameter aligns with common keyed chuck interfaces and allows precise engagement without excess play. Can the key be kept in a bench tool set or parts bin? Supplied as a single unit, the key is compact and suited for bench tool sets or organised parts bins for rapid access during maintenance and production. How can the RÖHM gear‑type key be maintained for long life? Regular cleaning of the teeth, occasional light lubrication where appropriate, and keeping the key free from corrosive exposure will help maintain reliable engagement and extend service life. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6mm ER 40 Collet Precision Hold, Ø41mm Clamp Range Nennmaß−1.0mm, L46mm - TECWERK
Compact, repeatable clamping and simple compatibility make this collet a pragmatic choice for precision workshops. With runout 5 µm and a 6 mm clamping diameter, the component ensures concentric gripping and predictable tool life; order directly via Metav Werkzeuge or consult our specialists for matching chucks and handling advice. TECWERK ER 40/472 E Collet — ER 40 collet, 6 mm clamping diameter and 46 mm length A TECWERK ER 40/472 E collet engineered for high-precision clamping in ER 40 toolholders, ideal for machining centres and toolroom applications Compliant with DIN 6499-B Full-length tool grip including chamfer High concentricity with 5 µm runout Suitable for 6 mm shank, L 46 mm Consistent concentric clamping for improved machining accuracy The collet delivers a runout 5 µm specification that translates into markedly better concentricity during high-speed milling and drilling. Reduced radial runout leads to smoother tool engagement, improved surface finish and longer cutter life. For production environments where repeatable tolerances matter, the concentric clamping offered here reduces rework and minimises scrap by keeping the tool axis stable throughout operation. Standardised fit and faster set-up for flexible workflows Built to DIN 6499-B, the clamping element fits standard ER 40 chucks and avoids the need for intermediate sizes. The design holds tools along the entire clamping length and permits clamping on the guiding chamfer, which eases set-up and shortens changeover times. This compatibility supports mixed-tool inventories and streamlines operations in small series and batch production without introducing additional fixturing complexity. Compact dimensions with practical bridging for versatility With an overall 46 mm length and an outer diameter of 41 mm, the collet remains compact while providing secure retention. The device bridges clamping diameter variations up to nominal minus 1.0 mm, enabling reliable gripping of slightly undersized shanks without auxiliary sleeves. The nominal 6 mm clamping diameter is therefore adaptable across a range of common tool shanks, offering flexibility for toolrooms and maintenance shops where a limited set of collets must cover multiple tool types. Applications, benefits and workshop suitability Designed for machining centres, milling machines and precision toolholding, this ER 40 clamping solution supports both small-batch manufacturing and demanding toolroom work. The combination of precision clamping and simple compatibility lowers setup time and increases throughput. Maintenance is straightforward due to the conventional ER design, while the high repeatability reduces inspection cycles and contributes to a stable production rhythm. For reliable ER 40 clamping from a trusted partner, speak with Metav Werkzeuge about the TECWERK ER 40/472 E collet—our consultants will advise on compatibility and supply; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 2000832964NW Type: ER 40 Product type: ER collet Brand: TECWERK Packaging unit: 1 Facts Clamping diameter: 6 mm Length L: 46 mm Outer diameter D: 41 mm Shank diameter d: 6 mm Runout / repeatability: 5 µm Clamping-diameter bridging: nominal − 1.0 mm Special features Compliant with DIN 6499-B Fits ER 40 collet chucks Tools held along the whole clamping length Can be clamped on the guiding chamfer No intermediate sizes required FAQ What tolerance can be expected for concentricity? The TECWERK ER 40/472 E collet specifies a runout and repeatability of 5 µm, ensuring tight concentricity for precision machining. Will this collet fit standard ER 40 chucks? Yes, the collet is manufactured to DIN 6499-B and is compatible with standard ER 40 toolholders. Can slightly undersized tool shanks be clamped reliably? Clamping-diameter bridging is nominal − 1.0 mm, allowing secure gripping of slightly undersized shanks without additional sleeves. What are the main dimensions to check when replacing a collet? Key dimensions are L 46 mm, outer diameter D 41 mm and the clamping diameter 6 mm; these determine fit and clearance in the holder. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
6mm ER Collet 18mm Clamping Length Nominal Minus 0.5mm Runout 5µm - TECWERK
Take advantage of a precise clamping solution with a 6 mm nominal clamping diameter and 5 µm runout accuracy that stabilises tool concentricity and extends tool life; order the collet directly via Metav Werkzeuge or consult our specialists for application advice. Collet ER 11/4008 E — ER 11 collet, 6 mm clamping diameter, TECWERK Collet ER 11/4008 E for ER collet chucks, compatible with DIN 6499-B and designed for reliable full-length gripping of tools DIN 6499-B compatible ER collet Precise runout: 5 µm tolerance Clamping range: nominal −0.5 mm Compact length L 18 mm for ER chucks Improved machining accuracy through concentric clamping The ER 11 collet delivers a measurable improvement in concentricity thanks to a guaranteed 5 µm runout. This level of accuracy reduces vibration and uneven wear during turning and milling operations, which in turn preserves cutting edges and improves surface finish. The ability to maintain the tool along the full clamping length ensures stable support, especially when the tool is inserted to the guiding chamfer; the result is fewer reworks and a more predictable production output. Seamless integration with ER 11 systems for workshop efficiency Designed to the DIN 6499-B standard, this collet fits common ER collet chucks without requiring intermediate adjustments. With an effective clamping diameter 6 mm, an outer diameter of D 11.5 mm and a compact L 18 mm length, the component is suitable for tight setups where space and repeatability matter. Standardised dimensions speed up changeover times and make inventory management easier, supporting a leaner tooling strategy and fewer machine downtimes. Practical benefits and handling explained The specification “clamping bridge: Nennmaß minus 0.5 mm” indicates the collet’s capacity to grip slightly undersized tools, increasing flexibility across batches with small diameter tolerances. The short overall length aids access in confined holders while maintaining roundness under load, so operators can rely on consistent results. As a branded part from TECWERK, the collet combines standard conformity with practical handling features that suit everyday workshop demands. For tailored advice on selecting the right ER 11 clamping solution and to arrange supply from Metav Werkzeuge, please contact our team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists will recommend the optimal configuration for the application. Technical Data Article number: 2000832863NW SKU: 2000832863NW Type: ER 11 Product type: ER collet Label: Spannzange Typ ER 11/4008 E Spann-D.6mm TECWERK Manufacturer: TECWERK Facts Clamping diameter: 6 mm Length L: 18 mm d: 6 mm D: 11.5 mm Runout / roundness: 5 µm Clamping bridge: nominal −0.5 mm Standard: DIN 6499-B Packaging unit: 1 Special features Suitable for ER collet chucks Full clamping length holding Can be clamped on guiding chamfer No intermediary sizing required Compact design for confined setups FAQ What level of concentricity can be expected with this collet? The Collet ER 11/4008 E guarantees a runout of 5 µm, ensuring high concentricity for precision machining tasks. Is this collet compatible with standard ER 11 chucks? Yes, the collet is produced to DIN 6499-B and fits typical ER 11 collet chucks designed for the ER 11 system. Can slightly undersized tools be clamped securely? The design allows a clamping bridge of Nennmaß minus 0.5 mm, enabling secure gripping of tools marginally below the nominal diameter. What are the outer and overall dimensions of the collet? The component has an outer diameter of D 11.5 mm and a length L 18 mm, making it suitable for compact chuck assemblies. Which brand manufactures this collet and where is it supplied from? This collet is a TECWERK product and is supplied via Metav Werkzeuge; refer to the SKU 2000832863NW for ordering. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm ER Collet 40mm Length 5 µm Runout Accuracy, DIN 6499-B - TECWERK
Combining DIN 6499-B compatibility, full clamping length grip and 5 µm repeatability, this ER 32 collet delivers stable, high-precision clamping for demanding machining tasks; order via Metav Werkzeuge or consult our specialists for application support. TECWERK ER 32 collet ER 32/470 E – 6 mm clamping diameter, L 40 mm A TECWERK ER 32 collet ER 32/470 E designed for secure clamping of 6 mm tools in standard ER collet chucks, providing consistent concentricity for production and workshop use DIN 6499-B standard compliance Holds tools along full clamping length Runout and repeatability 5 µm Suitable for 6 mm clamping diameter Consistent concentricity that cuts rework time High-precision machining relies on stable tool alignment; the 5 µm specification for runout and repeatability means less scrap and fewer rejects in serial production. This level of concentricity reduces tool vibration and improves surface finish, which in turn lowers secondary operations such as regrinding or polishing. For users installing the collet in series production or frequent changeover scenarios, the predictable tolerance performance translates directly into shorter setup verification and more uptime on the machine. Secure grip across the entire tool shank for safer cutting The collet clamps along the full clamping length, so the tool is supported more completely than with short-contact systems. That continuous contact makes cutting forces distribute evenly, reducing the risk of chatter and extending tool life. Because the sleeve can also be engaged on the lead chamfer, short shanks and partial-support tools can still be held reliably. The specification for clamping diameter bridging (nominal minus 1.0 mm) further improves flexibility when slight diameter differences occur, avoiding unnecessary downtimes for regrinding or shimming. Fast compatibility and reduced setup complexity Manufactured to DIN 6499-B, the design ensures straightforward interchangeability with standard ER collet chucks; no intermediate sizes are required. The compact dimensions L 40 mm, d 6 mm and D 33 mm make the component easy to handle and install, while the standardised form factor simplifies inventory management. For workshops and small-scale production facilities this standardisation reduces the variety of spares needed and accelerates tool changes, supporting lean processes and efficient throughput. Built for workshop and production environments As an ER 32 clamping solution, this sleeve suits applications from light milling to more demanding turning and drilling operations where a reliable grip is essential. Its construction and tolerance focus supports repeatable performance across multiple shifts. Combined with Metav’s philosophy of making precision accessible, the component offers a pragmatic balance of industrial compatibility and everyday usability — a practical choice for maintenance departments, contract manufacturers and precision toolrooms seeking dependable clamping without unnecessary complexity. Contact Metav Werkzeuge in Emmerich for tailored application advice and ordering support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832942NW Product type: ER 32 Product category: ER collet Manufacturer: TECWERK Packing unit: 1 Facts Clamping diameter: 6 mm Runout and repeatability: 5 µm Clamping diameter bridging: nominal minus 1.0 mm Length L: 40 mm Inner diameter d: 6 mm Outer diameter D: 33 mm Special features Manufactured to DIN 6499-B Fits ER collet chucks No intermediate sizes required Tools held along the full clamping length Can be clamped on the lead chamfer FAQ What level of concentricity can be expected with this collet? The ER 32 collet offers 5 µm runout and repeatability, providing tight concentricity suitable for precision machining tasks. Is the collet compatible with standard ER chucks? Yes, it is produced to DIN 6499-B and fits standard ER collet chucks, ensuring straightforward interchangeability. Can short shanks or tools with chamfers be held securely? The sleeve is designed to be held on the lead chamfer and across the full clamping length, allowing reliable clamping of short or partially supported tools. What are the physical dimensions of the component? Dimensions are L 40 mm, d 6 mm and D 33 mm, matching the ER 32 form factor for compact installation. Does this component accommodate slight diameter deviations? Yes, the clamping diameter bridging (nominal minus 1.0 mm) offers tolerance for small diameter variations without requiring intermediate measures. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
6mm ER16 Collet 27mm Length 5µm Runout, DIN 6499-B - TECWERK
Take advantage of a compact, precision clamping solution that combines proven repeatability with simple integration into ER tooling systems; the reliable 5 µm runout and full‑length gripping reduce set‑up time and scrap. Order the TECWERK ER 16 collet directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK ER 16 collet — 6 mm clamping diameter, DIN 6499‑B compliant The ER 16 collet (Type 426 E, 6 mm) is a precision clamping insert for ER collet chucks, engineered to deliver concentricity and secure grip across the entire clamping length. DIN 6499‑B compliant precision Secure clamping across full length Runout accuracy 5 µm Compact length L 27 mm, 6 mm bore High repeatability for consistent machining results The collet is designed to provide consistent concentricity, ensuring that every clamped tool or workpiece runs true. Compliant with DIN 6499‑B, the component guarantees a defined interface and dimensional conformity with ER‑type chucks, which simplifies tool selection and quality control. The specified runout / repeatability of 5 µm minimises vibration and tool wobble, translating directly into better surface finish and longer tool life. This measurable performance is a sound basis for process stability in small to medium batch production. Reduced set‑up time through full‑length clamping Because the insert is held along the whole clamping length, the need for re‑positioning or additional support is reduced. The design permits clamping on the lead‑in chamfer as well as on the straight bore, so tools with slight dimensional deviations can still be secured without bespoke intermediate sizes. The resulting efficiency lowers fixture complexity and shortens machine downtime between operations, supporting faster changeovers and higher overall equipment effectiveness. Compact design that fits existing ER systems With a nominal clamping diameter of 6 mm, length L 27 mm and an external diameter of 17 mm, the collet integrates cleanly into standard ER 16 toolholders. The clamping range bridging (nominal minus 1.0 mm) provides practical tolerance compensation for common workshop situations, allowing a single insert to accommodate small diameter variants. The compact footprint helps maintain access in tight tool spindles and keeps the centre of gravity close to the chuck, which is beneficial for dynamic balance and higher spindle speeds. Practical benefits for workshop and production environments The straightforward compatibility with ER chucks and the absence of required intermediate sizes make procurement and inventory management simpler. The combination of standard compliance, 5 µm concentricity and full‑length holding reduces scrap rates and inspection time, delivering a clear cost‑efficiency argument for workshops aiming to democratise precision. For applications where reproducible clamping and predictable machining outcomes matter, this ER collet is a robust, low‑complexity choice. For application advice, stock availability or to secure TECWERK ER 16 collets, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for dependable supply and expert guidance. Technical data Article number: 2000832917NW Product: ER 16 collet, Type 426 E Brand: TECWERK Packaging unit: 1 Facts Clamping diameter: 6 mm Length (L): 27 mm External diameter (D): 17 mm Runout / repeatability: 5 µm Clamping range bridging: nominal minus 1.0 mm Special features DIN 6499‑B compliant Fits ER collet chucks (Type ER) No intermediate sizes required Held along the whole clamping length Can be clamped on the lead‑in chamfer FAQ Is this collet compatible with standard ER 16 chucks? Yes. The TECWERK ER 16 collet (Type 426 E, 6 mm) is manufactured to fit ER‑type collet chucks in accordance with DIN 6499‑B. What clamping accuracy can be expected with this insert? The collet delivers a runout and repeatability of 5 µm, which supports high concentricity applications and improved surface finish. Can the collet be used to grip along the full tool length? Yes. The design allows the tool to be held across the full clamping length and it can also be clamped on the lead‑in chamfer when appropriate. Which dimensions should be checked before installation? Key measurements are clamping diameter 6 mm, length L 27 mm, external diameter 17 mm, and the bridging allowance of nominal minus 1.0 mm for close tolerances. Are intermediate sizes necessary when the workpiece differs slightly? No intermediate sizes are required; the design permits bridging of up to nominal minus 1.0 mm, simplifying tool selection. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
6mm ER16 Collet With 4.9mm Internal Square, 15µm Runout, 27.5mm Length - TECWERK
Combine 15 µm runout accuracy with a 6 mm clamping diameter and a 4.9 mm internal square for reliable tapping: an efficient choice for precision tapping and general clamping tasks — order directly via Metav Werkzeuge or consult our specialists for compatibility advice. ER16-GB collet, clamping diameter 6 mm, internal square 4.9 mm (TECWERK) An ER16-GB collet engineered for secure clamping and tapping operations in ER-style tap and collet chucks. Precise 15 µm runout accuracy Integrated internal square for tapping Compact length of 27.5 mm for stable engagement Compatible with ER-type tap and collet chucks Precision that reduces rework and scrap The core advantage of this clamping sleeve is its runout accuracy of 15 µm, which directly lowers the risk of misaligned threads and premature tool wear. High concentricity is essential when performing tapping or finishing operations: less deviation in rotation means cleaner threads and fewer rejects. For production environments that demand repeatable results, the combination of 15 µm tolerance and a standard ER interface improves throughput and reduces the need for secondary corrections, supporting a more efficient machining cycle. Designed for tapping with an internal square This GB-type collet includes an internal square (4.9 mm) specifically to engage taps securely during thread cutting. The internal drive prevents slippage of the tap while transmitting torque more reliably than a plain bore. Compliant with DIN 6499, the design ensures standardised fit and predictable behaviour in dedicated tap chucks and ER collet holders. The 6 mm clamping diameter together with a 27.5 mm overall length provides sufficient engagement for most common tapping tasks, combining stability with compactness for use in confined toolholders. Easy integration into ER systems and reduced downtime As a Type ER-GB clamping component, this item fits established ER systems and can be swapped into existing ER16 holders without special adapters, simplifying inventory and tool change routines. The compact design and standardised interface shorten setup times and support fast changeovers on the shop floor. Presented as a dependable accessory from TECWERK, the collet offers practical performance advantages for workshops and light industrial applications that prioritise repeatability and ease of use. Contact Metav Werkzeuge for availability, technical compatibility checks and procurement assistance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss how the TECWERK ER16-GB collet suits current setups Technical data Article number: 2000834957NW Type: ER16-GB Description: ER16-GB collet, clamping diameter 6 mm, internal square 4.9 mm, TECWERK Product type: Collet GB Manufacturer: TECWERK Packaging unit: 1 Facts Clamping range: 6 mm Clamping diameter (d): 6 mm Runout accuracy: 15 µm Length (L): 27.5 mm Internal square: 4.9 mm Special features Type ER-GB according to DIN 6499 Internal square for tapping operations Fits ER-type tap and collet chucks Compact design for stable engagement FAQ What runout tolerance can be expected from this collet? The collet delivers a runout accuracy of 15 µm, which helps to maintain concentricity during tapping and reduces the risk of thread defects. Is this collet suitable for tapping operations? Yes. The ER16-GB unit features an internal square of 4.9 mm specifically intended to drive taps securely for reliable thread cutting. Which chucks does the collet fit? The product is designed for ER-type tap and collet chucks and follows the ER16 form factor specified in the technical data. What are the key dimensions to consider when replacing an existing collet? Key dimensions are the 6 mm clamping diameter, 27.5 mm overall length and the 4.9 mm internal square — verify these against the current holder before replacement. Can the TECWERK ER16-GB (SKU 2000834957NW) be used as a direct replacement for standard ER16 collets? In most ER16 holders, yes — the ER-GB variant is intended to match ER16 interfaces while providing the internal square for tapping; confirm holder compatibility where unusual toolholders are used. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm ER25 Collet Precision Clamping Collet 5 µm Runout, L34 D26 - TECWERK
Precision clamping and proven runout control ensure stable tool holding and consistent part quality; with full‑length support and DIN 6499‑B conformity this ER 25 collet offers a dependable solution for precision tooling. Order the ER 25 collet directly via Metav Werkzeuge or ask our consultants if needed. TECWERK ER 25 Collet – 6 mm Clamping Diameter, conform DIN 6499‑B TECWERK ER 25 collet 6 mm for precision clamping in ER collet chucks, designed for secure tool holding and repeatable centring in machining operations Conforms to DIN 6499‑B High runout accuracy 5 µm Full‑length tool support Fits standard ER collet chucks Precision that reduces setup time and scrap The ER 25 collet is manufactured to the DIN 6499‑B standard and delivers a runout repeatability of 5 µm, a figure that directly contributes to tighter tolerance keeping and reduced rework. The adherence to an established metric ensures compatibility with industry‑standard tooling and measuring equipment; this makes integration into existing setups straightforward and measurable. By choosing a collet specified for minimal radial runout, operators can expect improved surface finish and longer tool life, which translates into fewer interruptions on the shop floor and more predictable production output. Secure clamping across the entire tool length Tools are held along the full clamping length, which increases contact area and reduces vibration during cutting. The collet also permits clamping on the lead chamfer, enabling reliable retention even when tools have short shanks or reduced gripping length. The design allows a clamping diameter bridging of nominal minus 1.0 mm, giving a clear tolerance window for gripping slightly undersized shanks without compromising stability. The immediate benefit is a more consistent machining result and fewer tool changes caused by slippage, supporting smoother workflow in demanding operations. Compact dimensions for straightforward workshop logistics With an overall length of 34 mm, a clamping diameter of 6 mm (d: 6 mm) and an outer diameter D: 26 mm, this collet is compact yet robust for many turning and milling tasks. The small footprint simplifies holder selection and reduces inventory complexity since no intermediate sizes are required for common diameter transitions. Compatibility with standard ER collet chucks accelerates changeover times and supports leaner toolrooms, while the measured specifications provide clear, comparable data for procurement and quality audits. Contact Metav Werkzeuge for specification confirmation or to arrange delivery of the TECWERK ER 25 collet; Metav Werkzeuge in Emmerich can advise on compatibility and availability for immediate workshop needs Technical data Article number: 2000832927NW Product type: ER 25 collet Label: Spannzange Typ ER 25/430 E Spann‑D.6mm TECWERK Manufacturer: TECWERK Packaging unit: 1 Core dimensions Clamping diameter: 6 mm Length L: 34 mm Inner d: 6 mm Outer D: 26 mm Runout / repeatability: 5 µm Clamping‑diameter bridging: nominal minus 1.0 mm Characteristics / Features Conforms to DIN 6499‑B Suitable for ER collet chucks Tools held over the full clamping length Clamping possible on the lead chamfer No intermediate sizes required FAQ What clamping diameter does this collet accept? The collet accepts a clamping diameter of 6 mm as specified for the TECWERK ER 25 collet (SKU 2000832927NW). How accurate is the radial runout? Radial runout is specified as 5 µm repeatability, which supports high‑precision machining with consistent concentricity. Can the collet grip tools on the lead chamfer? Yes, the design allows clamping on the lead chamfer and holds tools across the full clamping length for improved stability. Is this collet compatible with standard ER chucks? The collet conforms to DIN 6499‑B and is suitable for use with standard ER collet chucks designed for ER 25 tooling. What are the main dimensions to check for toolholder compatibility? Key dimensions are length L = 34 mm, inner diameter d = 6 mm and outer diameter D = 26 mm; these are used to confirm fit with holders and spindles. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
6mm ER25 Collet With 4.9mm Internal Square For Thread Cutting, 34mm Length - TECWERK
Take advantage of precise clamping and tapping compatibility combined with proven DIN 6499 conformity for reliable tooling performance. The collet’s 15 µm runout accuracy and the internal 4.9 mm square for tapping reduce rework and extend tool life—order directly via Metav Werkzeuge or consult our specialists for tailored advice. ER 25-GB Collet – 6 mm clamping, internal 4.9 mm square (TECWERK) The ER 25-GB collet provides high-precision clamping for tapping and general ER applications, designed for use in ER-type tap and collet chucks and manufactured to DIN 6499 standards. DIN 6499-compliant design 15 µm runout accuracy Internal 4.9 mm square for tapping Fits ER tap and collet chucks Exceptional precision for repeatable machining results A focus on measurable accuracy ensures consistent part quality: the collet offers 15 µm runout accuracy, which minimises radial run-out and vibration during rotation. This level of precision translates into improved surface finish and longer tool life, particularly important when performing threading or finishing operations. The compatibility with the ER system maintains concentricity across tools, supporting reliable repeatability in series production. Built for tapping and secure clamping The integrated internal square with a 4.9 mm dimension secures taps for reliable thread-cutting operations while the nominal 6 mm clamping diameter ensures firm retention of straight shank tools. This combination reduces the need for additional adapters and shortens tool-change times. The modest overall size with length 34 mm suits compact toolholders and contributes to stable tool engagement, helping to prevent tap breakage and improving process security. Standards compliance and broad compatibility to simplify procurement Manufactured in accordance with DIN 6499, the collet fits standard ER tap and collet chucks, reducing inventory complexity and ensuring interoperability across widely used holders. The straightforward specification means procurement can focus on performance metrics—compatibility and precision—rather than bespoke adaptations. For workshops seeking a pragmatic balance of accuracy and logistical simplicity, this GB-style collet streamlines selection and stock management. Contact Metav Werkzeuge for expert guidance on integrating TECWERK ER 25-GB collets into production and to arrange prompt supply from Emmerich. Technical data Article number: 2000834962NW Type: ER 25-GB Label: Spannzange ER25-GB Spann-D.6mm 4-KT.4,9mm TECWERK Manufacturer: TECWERK Facts Clamping diameter: 6 mm Runout accuracy: 15 µm Length: 34 mm Shank diameter: 6 mm Internal square: 4.9 mm Packaging unit: 1 Special features DIN 6499 standard Internal square for tapping operations Suitable for ER tap and collet chucks High concentricity for precision clamping FAQ What tapping shank size is accepted by this collet? The collet accepts taps with an internal square of 4.9 mm, enabling secure holding for standard tapping operations with the TECWERK ER 25-GB collet (SKU 2000834962NW). Is this collet compatible with standard ER chucks and tap holders? Yes, the ER 25-GB collet is designed for compatibility with ER-type collet chucks and tap holders and is manufactured to DIN 6499 to ensure broad interchangeability. What level of runout can be expected during operation? The collet delivers a runout accuracy of 15 µm, supporting stable rotation and improved surface finish during threading and finishing tasks. What are the key dimensions to consider for toolholder fit? Key dimensions include a clamping diameter of 6 mm, overall length of 34 mm, and an internal square of 4.9 mm, relevant when matching the collet to holders and tools. Can the collet be used specifically for tapping operations? Yes, the ER 25-GB collet is expressly equipped with an internal square for tapping and is suitable for use in ER tap and collet chucks for secure thread-cutting operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm ER32-GB Collet With 4.9mm Internal Square For Thread Cutting, 15 µm Runout - TECWERK
Benefit from precise tapping and consistent clamping thanks to DIN 6499 compatibility and a measured runout of 15 µm; the compact 40 mm design keeps setups neat and reduces interference. Order directly via Metav Werkzeuge or request technical advice from the consultants for application-specific recommendations. Collet ER32-GB – TECWERK ER32 GB collet with 6 mm clamping diameter and 4.9 mm internal square The Collet ER32-GB is an ER32 GB collet designed with an internal square to support tapping operations and a 6 mm clamping diameter for accurate tool holding in ER-type collet chucks. ER32‑GB design with internal square for tapping 6 mm clamping diameter for precise hold Runout accuracy 15 µm for concentricity Compact 40 mm length for tight spaces Accurate tapping starts with consistent clamping The ER32‑GB collet is engineered for reliable thread-cutting and tapping applications by combining the internal square geometry with proven ER clamping mechanics. Conforming to DIN 6499, the internal square secures the tap during rotation and prevents slippage, while the measured runout accuracy of 15 µm ensures concentricity between tool and workpiece. For machining processes where thread quality and repeatability matter, this level of precision reduces rework and supports consistent part quality. The collet’s 6 mm clamping diameter and compact profile make it straightforward to integrate into existing ER-type setups without extensive reconfiguration. Compatibility that shortens setup and stabilises cycles Designed to mate with standard ER-type collet chucks, the GB variant simplifies tool changes and keeps the tool centre aligned. The short 40 mm length assists in tight spindle spaces and reduces overhang, which in turn reduces vibration and improves surface finish. Compatibility with tapping and thread-cutting operations means fewer specialised holders are required, streamlining tool inventory and setup time. The combination of standard interfaces and a snug 4.9 mm square drive supports dependable engagement for rotary tapping and similar operations, contributing to faster, error-free changeovers. Process stability that protects tool life and productivity Consistent clamping accuracy directly impacts tool life and cycle reliability; lower runout minimises radial forces and uneven wear on taps and small-diameter tools. The GB collet’s design focuses on secure torque transmission during tapping, reducing the risk of thread distortion and broken tools. By favouring concentricity and a solid mechanical connection, the collet supports stable feeds and speeds, which leads to improved process reliability and fewer interruptions on the shop floor. For operations that prioritise throughput and repeatable quality, this component contributes to measurable gains in overall equipment effectiveness. For secure tapping and dependable clamping, consider the TECWERK ER32‑GB collet—contact Metav Werkzeuge for ordering details or application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000834970NW Type: ER 32-GB Product: GB collet Packaging unit: 1 Facts Clamping diameter: 6 mm Runout accuracy: 15 µm Length: 40 mm Square drive: 4.9 mm Special features According to DIN 6499 Internal square for tapping Suitable for thread-cutting and ER-type collet chucks Compact design for confined spindle spaces FAQ What clamping diameter does the collet provide? The collet offers a clamping diameter of 6 mm and is designed to hold small-diameter taps and tools securely. Is this collet suitable for tapping operations? Yes. The ER32‑GB collet features an internal 4.9 mm square and is manufactured according to DIN 6499, making it suitable for tapping and thread-cutting tasks. What runout can be expected and why does it matter? Runout is specified at approximately 15 µm; lower runout improves concentricity, reduces tool wear and enhances thread quality during machining. Which chucks are compatible with this collet? The collet is compatible with standard ER-type collet chucks and tapping collet holders that accept ER32‑GB variants. How compact is the design and what benefit does that bring? With a length of 40 mm, the collet minimises tool overhang, helping to reduce vibration and improve surface finish in confined spindle arrangements. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm Quick-Change Insert SE 4.9mm Square Shank For DIN 371 M5-6, DIN 374/376 M8 - TECWERK
Benefit from fast tool changes, secure tap retention and direct torque transfer via a 4.9 mm square shank; the insert supports standardised threading operations and reduces setup time. Order the quick-change insert directly via Metav Werkzeuge or consult the specialists for application support. Quick-change insert SE 6 mm × 4.9 mm, Size 1 – for DIN 371 M5–6 and DIN 374/376 M8 (TECWERK) A quick-change insert SE 6 mm × 4.9 mm Size 1 engineered to hold thread taps securely for efficient threading in production and maintenance environments. Fast tool change via quick-clamp insert Torque via 4.9 mm square shank Compatible with DIN 371 and DIN 374/376 taps Faster threading with reliable tap retention The quick-change insert delivers measurable efficiency gains by enabling rapid exchange of taps held in the quick-clamp mechanism. Designed for use with taps to DIN standards, the insert provides secure tap retention so that the tap remains correctly aligned during threading cycles. The construction ensures that torque is transmitted directly through the 4.9 mm square shank, avoiding slippage under load and supporting consistent thread quality. For operations where reducing downtime and ensuring repeatable results are priorities, this insert helps maintain throughput without complex changeover procedures. Built for workshop and production flexibility Compatibility with both DIN 371 (M5–6) and DIN 374/376 (M8) threads makes this insert a flexible choice across varied tapping tasks. The unit’s design supports conventional workshop toolholders and quick-change systems, permitting straightforward integration into existing tooling setups. The mechanism is intended to hold taps via the quick-clamp arrangement rather than a safety coupling, which simplifies handling while preserving dependable performance. Where quick adaptation between different shank dimensions is required, alternative inserts are available to match specific shank sizes and operational demands. Clear specifications to aid selection and integration Key dimensions and measurable characteristics are provided to support correct selection and installation: the 6 mm diameter contact area and the 4.9 mm square for torque transfer are the principal interfaces to consider. Secondary dimensions such as L1, L3 and D give precise information for ensuring compatible seating and clearance in holders. Where integration into a toolroom or production cell is planned, these numerical values enable planners to verify fitment, provide correct clamping depth and predict the functional envelope of the insert within automated or manual fixtures. For proven industrial use, select the insert that matches the tap standard and holder geometry. Contact Metav Werkzeuge today for tailored advice on integrating TECWERK quick-change inserts into the workflow and for reliable supply from Emmerich to the workshop bench. Technical data Article number: 4000832636NW Product type: Quick-change insert SE Brand: TECWERK Size designation: Size 1 Packaging unit: 1 Facts Diameter: 6 mm Square shank: 4.9 mm L3: 4 mm L4: 21.5 mm L5: 7 mm D: 30 mm L1: 18.5 mm D1: 19 mm Special features Suitable for DIN 371 M5–6 Suitable for DIN 374/376 M8 Without safety coupling Inserts hold taps via quick-clamp retention Torque transmission via shaft square Different inserts required for different shank sizes FAQ Which tap sizes are compatible with this insert? The insert is compatible with taps to DIN 371 for M5–6 and to DIN 374/376 for M8; the specification matches the relevant tap standards. How is torque transmitted from the holder to the tap? Torque is transmitted via the 4.9 mm square shank, providing direct and reliable torque transfer without relying on a safety coupling. Is a safety coupling included with the insert? No, the insert is supplied without a safety coupling; the design focuses on secure quick-clamp retention and direct torque transmission. What should be considered when replacing or selecting an insert for a different shank size? Different shank dimensions require the corresponding insert design; ensure the chosen insert matches the shank and holder geometry to maintain correct clamping and alignment. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm Quick-Change Insert SE 6mmx4.9mm Gr.2 for DIN 371 M5-6, DIN 374/376 M8 - TECWERK
Take advantage of a compact, Grade 2 quick-change insert that secures thread taps and transmits torque reliably via a 4.9 mm shaft square; order directly from Metav Werkzeuge or consult the technical team for application advice. Quick-change insert SE 6 mm × 4.9 mm (Size 2) by TECWERK The Quick-change insert SE 6 mm × 4.9 mm (Size 2) is a compact holder designed to retain thread taps via a quick-clamp system for efficient tapping to DIN 371 and DIN 374/376 standards Quick-change retention for thread taps Shaft square 4.9 mm for direct torque transfer Compatible with DIN 371 M5–6 and DIN 374/376 M8 Compact 6 mm insert — Size 2 geometry Faster tapping and reduced setup time The Quick-change insert SE 6 mm × 4.9 mm (Size 2) speeds up tool changes by keeping taps clamped in a quick-change nest rather than requiring time-consuming retooling of the spindle. The insert’s design focuses on throughput: secure retention of the tap enables repeatable starts and consistent thread form, while the compact footprint helps to save valuable spindle clearance. As a result, production cycles become more efficient and changeover losses are minimised, supporting continuous operation in both workshop and small-series production environments. Secure torque transmission with precise geometry The quick-change module transfers drive force through a shaft square 4.9 mm, which provides direct and measurable torque transfer to the tool shank. The absence of a safety clutch (no safety coupling) means torque is transmitted without slip, delivering predictable cutting behaviour when paired with appropriate taps and machinery. Specified geometry values such as L4: 35 mm, L1: 32 mm and L5: 11 mm contribute to stable axial positioning and alignment, reducing wobble and improving thread accuracy over repeated cycles. Broad compatibility for standard thread taps Designed for common thread standards, this insert accepts taps for DIN 371 M5–6 and DIN 374/376 M8, making it suitable for a wide range of metric tapping tasks. The system requires matching inserts for different shank sizes, so workshops can build a modular set to cover multiple tap diameters and thread types. The result is a versatile, standard-compliant solution that integrates with existing toolholders and quick-change fixtures without major retrofitting. Practical integration and service benefits Installation is straightforward: the insert is intended for use in housings where taps are retained by the quick-clamp device and the square shank engages the holder for drive transmission. Dimensional values such as D: 48 mm and D1: 31 mm support consistent seating in compatible fixtures, and a single-piece packaging unit simplifies stock handling. With its Grade 2 sizing and compact form, the module reduces inventory complexity while enabling rapid replacement, supporting steady production and predictable maintenance intervals. For application guidance or to secure the TECWERK SE quick-change insert for faster tapping operations, contact Metav Werkzeuge for tailored advice and ordering assistance — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: 4000832640NW UID: 4000832640NW Designation: Schnellwechseleinsatz SE 6mmx4,9mm Gr.2 f.DIN 371 M5-6 f.DIN 374/376 M8 Brand: TECWERK Product type: Quick-change insert SE Packaging unit: 1 Dimensions / Core data Diameter: 6 mm Shaft square: 4.9 mm L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm L1: 32 mm D1: 31 mm Special features / Applications Suitable for DIN 371 M5–6 Suitable for DIN 374/376 M8 Inserts held by quick-clamp device Torque transmission via shaft square Without safety clutch FAQ Which tap sizes and standards does this insert support? The Quick-change insert SE 6 mm × 4.9 mm (Size 2) is compatible with taps to DIN 371 M5–6 and DIN 374/376 M8 (SKU 4000832640NW), ensuring direct use with those metric thread types. How is torque transmitted and is there a safety coupling? Torque is transmitted through the shaft square 4.9 mm for direct transfer; the insert is specified without safety clutch, so torque is delivered without slip for predictable tapping performance. Can different shank dimensions be used with this insert? The module is designed for a 4.9 mm square drive; different shank sizes require correspondingly sized inserts, allowing a modular set-up for workshops needing multiple shank dimensions. What are the critical dimensions for fixture planning? Relevant dimensions include L4: 35 mm, L1: 32 mm, L5: 11 mm, D: 48 mm and D1: 31 mm, which support correct seating and alignment in compatible quick-change housings. Is this insert suitable for high-volume production? The quick-change design and direct torque transfer of this SE insert make it suitable for repetitive tapping operations where rapid tool changes and consistent thread quality are required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm Quick-Change Insert SES 4.9mm Square Shank Adjustable Torque Stop, DIN 371 M6 - TECWERK
Take advantage of the combination of an adjustable safety coupling and precise torque transmission via the shaft square to reduce tap breakage and keep production flowing; order the unit through Metav Werkzeuge or contact the consultants for specification advice. Quick-change Insert SES 6 mm x 4.9 mm, Size 2 – TECWERK A quick-change insert (SES 6 mm x 4.9 mm, Size 2) designed for tapping to DIN 371 M6, featuring an adjustable safety coupling for controlled torque release and rapid tool exchange. Adjustable safety coupling for torque limit Torque transfer via 4.9 mm square shank Compatible with DIN 371 M6 taps Safer tapping through controlled torque limitation The adjustable safety coupling is the central rational advantage of this quick-change unit: it limits torque to prevent sudden overloads, minimising the risk of tap breakage and the associated downtime. Torque is transmitted via the 4.9 mm square shank, ensuring secure mechanical engagement and consistent power transfer to the tap. For production environments where tool failure causes costly stoppages, this configuration delivers a measurable reduction in process interruptions and scrap rates, supporting higher overall productivity. Fast changeovers and straightforward integration Designed as a quick-change insert, the unit shortens tool-change cycles and fits into established tapping workflows. The insert’s geometry suits DIN 371 M6 taps and requires matching shaft sizes for correct operation; different inserts are available for other shank dimensions. The result is short changeover times and simplified stockkeeping of standardised holders and shafts. The compact form and clear interface between holder and insert help workshops integrate the component into semi-automatic or hand-operated tapping stations with minimal adaptation. Reliable dimensions and mechanical clarity for planners Key mechanical measures (L1, L3, L4, L5, D, D1) allow accurate fixture design and process planning: the unit’s compact lengths and diameters facilitate installation in confined setups while keeping sufficient engagement length for secure tapping. The adjustable coupling both protects tools and provides predictable failure behaviour, which eases maintenance planning and reduces unexpected service calls. Should additional technical data be required for CAD integration or machine compatibility checks, the Metav team can provide the exact dimensional drawings and advice by phone or email. For precise, torque-limited tapping choose the TECWERK Quick-change Insert and contact Metav Werkzeuge for tailored specification support and prompt delivery coordination. Technical data Article number: 4000832674NW Product type: Quick-change insert SES Type/Size: Size 2 Compatible with: DIN 371 M6 Data Diameter: 6 mm Square shank: 4.9 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm D1: 31 mm Packaging unit: 1 Special features Adjustable safety coupling for torque limitation Torque transmission via shaft square Prevents tap breakage Requires corresponding shank sizes for compatibility FAQ What is the primary safety feature of this quick-change insert? The TECWERK quick-change insert features an adjustable safety coupling that limits torque to prevent tap breakage during tapping operations. Which taps are compatible with the insert? The insert is intended for taps conforming to DIN 371 M6; compatibility relies on matching the tap shank and the holder interface. What are the key dimensions to check for machine integration? Important dimensions include the nominal diameter (6 mm), square shank (4.9 mm) and the lengths L1, L3, L4 and L5 as listed in the technical data for fixture and toolholder design. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm Quick-Change Insert SES 4.9mm Square Shank for DIN 374/376 M8, Adjustable Torque-Limiting Safety Clutch - TECWERK
Combining precise torque limitation with a swift changeover mechanism, this SES quick-change insert reduces tap breakage and keeps tapping cycles productive. Its compatibility with DIN 374/376 M8 and torque transmission via the shank square supports reliable tapping in production environments. Order or request application advice through Metav Werkzeuge for an optimised workshop setup. Quick-change insert SES 6 mm × 4.9 mm Size 2 — adjustable safety clutch, for DIN 374/376 M8 (TECWERK) The Quick-change insert SES 6 mm × 4.9 mm Size 2 is a compact tapping adapter designed to limit torque and prevent tap breakage in M8 applications while allowing rapid tool swaps. Adjustable safety clutch for torque limitation Reduces tap breakage during tapping Torque transmission via 4.9 mm shank square Compatible with DIN 374/376 M8 Safer tapping through adjustable torque control The integrated adjustable safety clutch provides a defined torque limit so the tapping process stops before a tap is overstressed, significantly lowering the risk of tap breakage. By transferring torque through the shank square, torque delivery is direct and measurable; this reduces slippage compared with softer drive connections. For workshop planners this means fewer scrap threads and less downtime for rework. The mechanism is particularly advantageous where fragile or hardened workpieces are present, because a predictable torque cut-off protects both tool and component. Faster changeovers and consistent fit in assembly lines Designed as a quick-change solution, the insert allows rapid replacement of tapping tools to maintain cycle times on production lines. The adapter is intended for use with standard M8 taps specified to DIN 374/376, so integration into existing processes is straightforward. Note that different shank dimensions require corresponding inserts, which simplifies inventory control when shank sizes are standardised. The listed dimensions (L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm, L1: 32 mm, D1: 31 mm) assist engineers in verifying correct fitment in toolholders and collets. Practical reliability for the everyday workshop Built to support repetitive tapping tasks, the unit helps reduce tool-related stoppages and supports predictable production throughput. Supplied as a single unit, it suits small-batch repairs as well as larger runs when combined with a stock of compatible inserts. The sturdy design and torque-limiting feature combine to protect skilled operators and valuable taps, lowering replacement costs and increasing overall equipment effectiveness. For purchasing and logistical simplicity, Metav’s distribution provides a dependable supply channel and application guidance from Emmerich. For tailored advice on shank compatibility, application use and to source the TECWERK quick-change insert, contact Metav Werkzeuge for expert guidance and reliable supply from Emmerich. Technical data SKU: 4000832675NW Product: Quick-change insert SES Size: 2 Diameter: 6 mm Shank square: 4.9 mm Suitable for: DIN 374/376 M8 Manufacturer: TECWERK Packaging unit: 1 Core dimensions L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm L1: 32 mm D1: 31 mm Special features Adjustable safety clutch for torque limitation Prevents tap breakage during tapping operations Torque transmission via shank square Requires specific inserts for different shank sizes FAQ Is this insert compatible with M8 taps specified to DIN 374/376? The Quick-change insert SES 6 mm × 4.9 mm Size 2 from TECWERK (SKU 4000832675NW) is designed specifically for use with taps conforming to DIN 374/376 M8. How does the adjustable safety clutch protect taps? The adjustable safety clutch on the SES insert limits torque transmission so the tool disengages before excessive load causes tap breakage, protecting both the tap and the workpiece during a blocked thread or sudden overload. Can the same insert be used with different shank sizes? Different shank dimensions require corresponding inserts; the SES system needs a matching shank size, so the TECWERK insert must be paired with the correct counterpart for reliable torque transfer. What are the key dimensions to check for toolholder compatibility? Check the listed core dimensions (L3, L4, L5, D, L1, D1) against the toolholder and collet specifications to ensure correct seating and engagement for consistent torque transmission. What is included in the packaging? The product is supplied as a single unit (packaging unit: 1) and is ready for installation into the appropriate toolholder or quick-change system. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
6mm Quick-Change Insert SES 4.9mm Square Shank for DIN 374/376 M8, Adjustable Torque-Limiting Safety Clutch - TECWERK
Benefit from the adjustable safety coupling and positive torque transmission via the square shank for reliable tapping operations; the insert is compatible with DIN 374/376 M8 and reduces the risk of tap breakage. Order the part directly via Metav Werkzeuge or consult their specialists for application advice. Quick-change insert SES 6 mm x 4.9 mm, Size 1 — adjustable safety coupling | TECWERK A Quick-change insert SES 6 mm x 4.9 mm, Size 1 designed for torque-limited tapping tasks in line with DIN 374/376 M8, suitable for workshop and production use Adjustable safety coupling for torque limitation Prevents tap breakage during tapping Torque transmitted via square shank Safer tapping through controlled torque release The Quick-change insert SES incorporates an adjustable safety coupling that limits transmitted torque to protect taps during interrupted threads or hard spots. The coupling slips at a defined torque level, which reduces the risk of catastrophic tap breakage and avoids costly rework. Torque transmission is effected via the square shank, delivering a positive drive that ensures repeatable, reliable force transfer to the tool shank without depending on friction alone. This technical arrangement supports consistent process quality and fewer tool failures in repetitive tapping operations. Predictable fit and compatibility for efficient setup Designed for standard tapping tooling, the insert matches DIN 374/376 M8 thread applications and uses a 6 mm shank diameter with a 4.9 mm square drive. Key interface dimensions—L1: 18.5 mm, L3: 24.5 mm, L4: 21.5 mm, L5: 25.5 mm, D: 32 mm, D1: 19 mm—ensure accurate seating in compatible holders and predictable reach. Different holder shafts require different inserts; selecting the correct insert size guarantees correct engagement and avoids play that can impair thread quality. Clear, measurable dimensions make inspection and inventory control straightforward for purchasing and maintenance teams. Robust design for continuous workshop performance With a focus on operational reliability, the insert is intended for repeated use in production and shop-floor environments where downtime matters. The torque-limiting feature minimises unplanned stoppages and protects both taps and workpieces, supporting cost-efficient machining cycles. Metav’s distribution and technical competence further back this solution: the company provides a broad range of precision tools, dependable supply from Emmerich and decades of industry experience—attributes that help reduce supplier complexity and support consistent workshop throughput. Contact Metav Werkzeuge for tailored application advice or to source the TECWERK SES insert; specialists at Metav Werkzeuge are available by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to assist with selection and compatibility questions. Technical data Article number: 4000832666NW SKU: 4000832666NW Product type: Quick-change insert SES Brand: TECWERK Facts Size: 1 Diameter: 6 mm Square shank: 4.9 mm Suitable for: DIN 374/376 M8 L1: 18.5 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm D1: 19 mm Special features Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via shank square Different inserts required for different shank sizes Packaging unit: 1 FAQ How does the adjustable safety coupling protect taps? The adjustable safety coupling limits torque by slipping at a preset threshold; the SES insert reduces overloads that typically cause tap breakage during tapping operations. Is the insert suitable for DIN 374/376 M8 taps? Yes, the SES insert is specified for DIN 374/376 M8 applications and features the corresponding interface dimensions for correct engagement. Which shank sizes are covered by this insert? This Size 1 insert is for a 6 mm shaft with a 4.9 mm square drive; different shaft dimensions require their matching inserts to ensure proper torque transfer. What dimensions determine fit in a tap holder? Critical dimensions for fit are L1, L3, L4, L5, D and D1; these ensure seating depth and engagement geometry in the holder are correct. Can the torque threshold be adjusted on the workshop floor? The torque limit is designed to be adjustable so that workshop personnel can set the slip point to suit material and thread conditions, reducing the chance of tap failure. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
6mm Quick-Change Insert SES 4.9mm Square Shank, Adjustable Torque-Limiting Clutch - TECWERK
Take advantage of a compact, torque‑safe quick‑change insert that reduces tap breakage and simplifies tool changes; the adjustable safety clutch and square‑shank torque transmission combine to protect tooling and maintain cycle reliability. Order directly via Metav Werkzeuge or consult the team for application advice. Quick‑change insert SES 6 mm × 4.9 mm Gr.1 for DIN 371 M5 – TECWERK with adjustable safety clutch Quick‑change insert SES 6 mm × 4.9 mm Gr.1 for DIN 371 M5 is a size‑1 quick‑change tapping insert designed for machine and workshop tapping operations where controlled torque and fast changeovers are essential Adjustable safety clutch for torque limitation Prevents tap breakage during threading Torque transmission via shank square Compact design for tight installation spaces Protects taps and reduces unplanned downtime The core advantage of this insert is its adjustable safety clutch, which limits applied torque and hence greatly reduces the risk of tap breakage during interrupted cuts or misfeeds. Where conventional toolholders transfer full spindle torque, this SES unit interrupts overloads, preserving both expensive taps and workpieces. Because the torque is transmitted via the shank square, the drive between holder and cutter remains secure under normal cutting loads while disengaging when a preset torque is exceeded, delivering consistent machine uptime and fewer changeovers due to tool failure. Reliable mechanical connection and clear compatibility The insert is configured for a 6 mm receiving diameter with a 4.9 mm square drive compatible with DIN 371 M5 taps, ensuring correct mechanical fit and standardised engagement. The design requires the matching insert for different shank sizes, simplifying inventory management: one holder family, multiple specific inserts. The compact geometry (see technical data) aids installation in confined heads and tapping arms. By using a standardised interface and torque safety, the system supports reproducible tapping results and predictable tool life — essential for batch production and quality control. Practical dimensions and workshop integration Key dimensions are provided for quick planning and integration: L1 and L3 relate to insertion depth and exposed length for collision checks, while D and D1 indicate the outer form for clamping and clearance. With a compact footprint and a packaging unit of 1, the insert is straightforward to trial and stock. The construction concentrates benefit on operational reliability: fewer broken taps, reduced scrap rates and more consistent thread quality. For shops seeking a pragmatic balance of safety and productivity, this insert provides a focused solution without complex retrofit work. Contact Metav Werkzeuge for tailored application advice and secure the TECWERK SES size 1 insert with adjustable safety clutch for safer, more reliable tapping operations Technical data Article number: 4000832664NW SKU: 4000832664NW Type: Größe 1 Product: Schnellwechseleinsatz SES Manufacturer: TECWERK Facts Diameter: 6 mm Square drive: 4.9 mm L1: 18.5 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm D1: 19 mm Suitable for: DIN 371 M5 Packaging unit: 1 Special features Adjustable safety clutch for torque limitation Avoidance of tap breakage Torque transmission via shank square Requires matching inserts for different shank sizes Compact form for tight installation spaces FAQ What is the primary safety feature of this insert? The insert uses an adjustable safety clutch to limit torque and reduce the likelihood of tap breakage when using the TECWERK SES size 1. Which tap standard is this insert compatible with? This quick‑change insert is compatible with DIN 371 M5 taps and is specified for a 6 mm receiving diameter with a 4.9 mm square drive. How does torque get transmitted through the unit? Torque is transmitted via the shank square, ensuring secure drive transfer under normal cutting conditions and safe disengagement at overload. Are there different sizes available for other shank dimensions? Yes, the design requires different inserts for alternative shank sizes; the TECWERK SES family provides matching sizes to suit various drives. Which dimensions are relevant when checking for machine clearance? Use the provided geometric figures (for example L1, L3, D and D1) from the technical data to verify installation space and collision clearances for the SES unit. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
6mm Schnellwechseleinsatz SES Vierkant 4,9mm für DIN 371 M6 mit einstellbarer Sicherheitskupplung - TECWERK
Schnellwechseleinsatz SES 6mmx4,9mm Gr.1 f.DIN 371 M6 – Schnellwechseleinsatz Schnellwechseleinsatz SES 6mmx4,9mm Gr.1 f.DIN 371 M6 ist ein robuster Schnellwechseleinsatz zur sicheren Gewindebearbeitung nach DIN 371 Schnellwechseleinsatz SES »SES 6mmx4,9mm Gr.1« von TECWERK Einstellbare Sicherheitskupplung gegen Bohrerbruch Drehmomentübertragung über Schaft-Vierkant Passend für Gewinde nach DIN 371 M6 Kompakte Bauform L1 18,5mm für enge Aufnahmen Reduzierte Ausfallzeiten durch intelligente Drehmomentbegrenzung Der Schnellwechseleinsatz wurde entwickelt, um produktive Zeit zu maximieren: Die einstellbare Sicherheitskupplung sorgt für eine präzise Drehmomentbegrenzung, wodurch Gewindebohrerbruch effektiv verhindert wird. Werkstätten profitieren davon, weil ungeplante Unterbrechungen seltener auftreten und Ersatzwerkzeuge sowie Nacharbeiten minimiert werden. Diese Funktion ist besonders für Serienfertigung und anspruchsvolle Materialkombinationen relevant, da sie Werkzeugkosten und Stillstandszeiten reduziert. Präzise Kraftübertragung und vielseitige Einsetzbarkeit Die Kraftübertragung erfolgt über den Schaft-Vierkant, wodurch ein spielfreier Sitz und zuverlässige Momentenübertragung gewährleistet sind. Der Einsatz ist speziell ausgelegt für Gewinde nach DIN 371 M6 und erlaubt durch die kompakte Bauform schnelle Werkzeugwechsel. Für unterschiedliche Aufnahmeschaftmaße werden entsprechende Einsätze benötigt, wodurch die Kompatibilität in modernen Werkstätten erhöht wird und Flexibilität beim Einsatz verschiedener Maschinen entsteht. Für wen dieses Produkt gedacht ist und wie es die Arbeit erleichtert Zielgruppe sind Industrie- und Handwerksbetriebe, die Gewindebearbeitung mit hoher Sicherheit und geringer Ausfallrate durchführen. Der Einsatz unterstützt Anwender, die Wert auf sichere Prozesse legen und die Lebensdauer von Gewindewerkzeugen verlängern möchten. Dank der durchdachten Konstruktion ist die Handhabung intuitiv, der Wechselprozess beschleunigt und die Wiederholgenauigkeit bei wiederholten Fertigungsschritten erhöht sich nachhaltig. Empfehlung: Der Einsatz mit einstellbarer Sicherheitskupplung von TECWERK empfiehlt sich besonders für Werkstätten, die Gewindebohren effizienter und sicherer gestalten wollen; bei Fragen oder für technische Beratung eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930_ Produktmerkmale Artikelnummer: 4000832665NW Marke: TECWERK Produktart: Schnellwechseleinsatz Typ: Größe 1 Geeignet für: DIN 371 M6 Verpackungseinheit: 1 Fakten Durchmesser: 6 mm Vierkant: 4,9 mm L1: 18,5 mm L3: 24,5 mm L4: 21,5 mm L5: 25,5 mm D: 32 mm D1: 19 mm Besonderheiten Einstellbare Sicherheitskupplung: zur Drehmomentbegrenzung Zur Vermeidung von Gewindebohrerbruch Drehmomentübertragung: über Schaft-Vierkant Passend für Gewinde nach DIN 371 M6 FAQ Wie verhindert der Einsatz Gewindebohrerbruch? Der Schnellwechseleinsatz SES von TECWERK nutzt eine einstellbare Sicherheitskupplung, die bei überschrittenem Drehmoment auskuppelt und so Gewindebohrerbruch minimiert; die Funktionsweise reduziert zudem Folgeschäden an Werkstück und Maschine. Ist der Einsatz direkt für DIN 371 M6 geeignet? Ja, der Schnellwechseleinsatz SES 6mmx4,9mm Gr.1 ist für Gewinde nach DIN 371 M6 ausgelegt und gewährleistet sichere Kraftübertragung über den Schaft-Vierkant. Welche Abmessungen sind relevant für die Aufnahme? Wesentliche Maße sind Durchmesser 6 mm und Vierkant 4,9 mm; weitere Maße wie L1 18,5 mm oder D 32 mm finden sich in den technischen Daten der SKU 4000832665NW. Brauche ich für andere Schaftmaße zusätzliche Einsätze? Ja, für unterschiedliche Schaftmaße sind verschiedene Einsätze erforderlich; das System ist modular aufgebaut, um Flexibilität in der Werkstatt zu gewährleisten. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
6mm Slot Bar Accessory for Precision Slot Head, 210mm Length - Vertex
Combining a 6 mm slot profile with a stable 0.56 kg mass and a 210 mm length delivers steady, repeatable slotting performance for production environments; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. VSH-6C slot bar accessory by Vertex — 6 mm precision fit, 210 mm length A VSH-6C accessory designed for precision slotting heads, providing a compact 6 mm slot profile for repeatable slotting and secure mechanical integration. Precision 6 mm slot bar Robust 0.56 kg construction Compatible with Vertex slotting heads Consistent slotting accuracy for dependable results The accessory supports precision slotting workflows by providing a defined 6 mm guided profile that stabilises the cutting interface. Fitted to a precision slotting head, the component reduces lateral play and helps maintain alignment across repetitive cycles. This results in fewer rework operations and improved first-pass yield, which is especially relevant in small-batch production and precision workshops. The design emphasises dimensional control, so tolerances are upheld even under frequent use, supporting higher throughput with consistent quality. Built for mechanical stability and straightforward integration Mechanical stability is achieved through a compact but substantial form factor; the 0.56 kg mass and 210 mm length balance rigidity with accessibility for typical machining set-ups. The bar is intended to be mounted to precision slotting heads where secure engagement and repeatability are essential. Installation is performed using standard fastening methods, so integration into existing toolheads is straightforward and setup times are reduced. The component’s form factor minimises vibration transfer and contributes to predictable tool behaviour, aiding in cycle-time optimisation and reducing maintenance intervals. Improved inventory control and production reliability As a standardised accessory with a clear SKU and GTIN, the unit simplifies spare-part management and procurement planning. The standardisation supports structured inventory policies and reduces machine downtime by enabling quick replacements. For workshops and production lines aiming to maintain uninterrupted operations, adopting uniform accessories enhances traceability and ensures compatibility across multiple machines. The measured, repeatable performance contributes to process reliability and supports a more efficient production flow. For secure procurement of Vertex precision accessories such as the VSH-6C, rely on Metav Werkzeuge in Emmerich for expert advice and reliable dispatch to keep production running smoothly. Technical data Article number: VSH-6C GTIN: 4061905084713 Manufacturer: Vertex Facts Weight: 0.56 kg Length: 210 mm Slot width: 6 mm Special features Accessory for precision slotting head Category: Accessory SKU: VSH-6C Brand: Vertex FAQ What is the intended application of this accessory? The VSH-6C is an accessory intended for use with precision slotting heads to provide a defined 6 mm slot profile for repeatable slotting operations. What are the key dimensions and weight? The component measures 210 mm in length, has a slot width of 6 mm and a weight of 0.56 kg as specified for the VSH-6C accessory by Vertex. Is the accessory compatible with Vertex precision slotting heads? Yes, the design of the VSH-6C matches Vertex precision slotting head interfaces and is intended to ensure secure compatibility and repeatable mounting. Which identifiers should be used for ordering and stock control? Use the SKU VSH-6C and GTIN 4061905084713 for clear identification and inventory tracking of this Vertex slot bar accessory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6mm T-Slot Nut M5 DIN 508, Height 8mm - AMF
Take advantage of standardised compatibility, compact dimensions and high tensile class for secure, repeatable clamping in workshop fixturing. Order the AMF component directly via Metav Werkzeuge or consult our specialists for application advice. T-Nutenstein DIN 508 T-Nut 6mm M5 AMF — standardised T-slot nut with M5 thread T-Nutenstein DIN 508 T-Nut 6mm M5 AMF is a compact, DIN‑compliant slot nut designed for secure clamping in 6 mm T‑slot systems and industrial fixturing DIN 508 standardised component 6 mm T-slot compatible M5 internal thread High strength class 10 Reliable, standardised fastening that reduces setup time The DIN 508 conformity ensures predictable fit and interchangeability in a wide range of clamping rails and machine tables. With a 6 mm T-slot interface and an M5 thread, the component allows rapid assembly with common fastening hardware, shortening set‑up cycles and lowering machine downtime. This standardisation supports efficient inventory management and simplifies procurement for maintenance and production teams. Robust strength for demanding clamping tasks Designed with strength class 10, the part provides elevated tensile strength for repeatable clamping forces in everyday shop use. The listed axial parameters (A: 5.7; E: 10; K: 4) indicate the measured performance characteristics that support reliable force transmission under load. Such mechanical consistency reduces the need for frequent replacement and contributes to stable machining setups in both prototyping and small‑series production. Compact height for low‑profile fixtures and precise positioning At an 8 mm height, the nut offers a low-profile solution for fixtures where vertical clearance is limited. The reduced profile helps avoid interference with workpieces while maintaining firm thread engagement via the M5 bore. This physical compactness is particularly beneficial for modular clamping systems and jigs where space optimisation and exact positioning are priorities. Practical choice for workshops and industrial users As a straightforward fastening element, the slot nut combines easy handling with technical reliability. Its clear specification supports planners and buyers in selecting compatible parts for retrofit or new builds without time‑consuming compatibility checks. Paired with Metav’s quality filter and broad product range, the component becomes part of a dependable supply chain solution for trades, maintenance departments and small industrial operations. For secure, standardised workholding, select the AMF T‑slot nut via Metav Werkzeuge or request tailored advice from Metav Werkzeuge’s application consultants. Technical data Article number: 4000833200NW Label: T-Nutenstein DIN 508 T-Nut 6mm M5 AMF Manufacturer: AMF Product type: T-Nutenstein Packaging unit: 1 Facts Height: 8 mm T-slot width: 6 mm Thread: M5 Standard: DIN 508 Strength class: 10 Axial values: A = 5.7; E = 10; K = 4 Special features DIN 508 compliant For 6 mm T-slots Internal M5 thread Strength class 10 Compact, low-profile design FAQ Is this part suitable for standard 6 mm T-slots? Yes. The T-Nutenstein DIN 508 T-Nut 6mm M5 AMF is specified for 6 mm T-slots and is manufactured to DIN 508 tolerances for compatibility with standard rails. What does strength class 10 mean for workshop use? Strength class 10 denotes a high tensile rating for the slot nut, so the AMF T-slot nut delivers robust clamping performance and durability in routine fixturing applications. Can the component be used with common M5 bolts? Yes. The internal M5 thread is compatible with standard M5 bolts and fastening hardware used in clamping and machine table assemblies. How does the 8 mm height affect installation in fixtures? The 8 mm height provides a low-profile solution that minimises interference while ensuring sufficient thread engagement for secure fastening within compact fixtures. What reference identifies the part for ordering? Order using article number 4000833200NW; the product is listed as T-Nutenstein DIN 508 T-Nut 6mm M5 AMF for clear identification. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6W LED Lamp Accessory, For LED Lamps - Vertex
Take advantage of the combination of energy efficiency and a compact, lightweight design to maintain reliable workshop illumination with minimal installation effort. Combine steady, low-power lighting and simple replacement logistics for uninterrupted operations. Order directly via Metav Werkzeuge or consult the Metav team for application-specific advice. LED6W — Vertex 6 W LED bulb accessory, compact and energy-efficient A LED6W accessory lamp offering low-power illumination for workshop and industrial lighting tasks, designed as a compact replacement solution for compatible LED fittings. *6 W energy-efficient LED bulb for steady illumination *Compact form factor for confined fittings *Lightweight 140 g for easy installation and replacement Reduced energy use without sacrificing practicality The small 6 W rating reflects a design focused on low power draw, which helps reduce operating costs where many fittings run continuously. The lamp’s compact profile allows integration into crowded luminaires and task lights commonly found in workshops and production benches. For procurement and inventory planning, the combination of low wattage and compact dimensions supports efficient energy management and straightforward stocking. Designed for straightforward installation and handling Built as an accessory for LED fittings, the unit’s lightweight 140 g construction simplifies handling during maintenance cycles and reduces strain on sockets and fixtures. The modest mass and compact geometry enable easy replacement and minimise downtime during shift changes. Technical teams benefit from the ease of handling when retrofitting or standardising illumination across workstations. Practical fit for industrial and workshop environments Although specified as an accessory for LED lamps, the component is intended for applications where dependable, focused lighting is required rather than architectural illumination. The accessory characteristic supports modular lighting strategies, permitting targeted upgrades without overhauling entire luminaires. This approach assists maintenance planners and production managers in achieving consistent lighting levels across critical work areas. Compatibility and procurement clarity The article is listed under Vertex and carries the SKU LED6W, facilitating straightforward ordering and stock management. The classification data included supports compatibility checks and catalogue integration for procurement systems. Specifiers and warehouse staff can use the SKU and GTIN entries to match existing fixtures and to ensure rapid replenishment from central stock. For tailored supply and application guidance on Vertex LED accessories, contact Metav Werkzeuge in Emmerich for reliable delivery and expert advice via email (info@metav-werkzeuge.com) or phone (+49 2822 7131930) to confirm suitability for intended fittings and lighting layouts. Technical data SKU: LED6W GTIN: 4061905089480 Manufacturer: Vertex Core specifications Power: 6 W Weight: 0.14 kg Features and compatibility Accessory for LED lamps Category: Zubehör für LED-Lampen ECLASS: 27110390 FAQ What is the intended application for this LED accessory? The LED6W is intended as an accessory lamp for LED fittings, suitable for workshop and industrial task lighting where compact, low-power illumination is required. How heavy is the Vertex LED6W unit? The Vertex LED6W weighs 0.14 kg, which supports easy handling and replacement in standard fixtures. Which identifiers help with ordering and inventory? Ordering and inventory reference values include the SKU LED6W and the GTIN 4061905089480, used to match the correct accessory in procurement systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6x4-1/2x5" Angle Plate High-Strength Cast Steel - Vertex
Taking advantage of high-strength cast-steel construction and a compact 6 x 4-1/2 x 5 in footprint, this workholding angle delivers stable clamping and consistent dimensional support for machining and inspection tasks; order directly via Metav Werkzeuge or consult the team for tailored advice. VR-60 Angle Clamp (Aufspannwinkel) — high-strength cast-steel workholding, 6 x 4-1/2 x 5 in | Vertex The VR-60 Angle Clamp provides rigid, low-vibration support for precision machining and measurement setups, designed for integration into benches, fixtures and inspection stations High-strength cast-steel construction Compact 6 x 4-1/2 x 5 in footprint Stable 3.2 kg mass for vibration damping Designed for precision machining setups Dependable stability for repeatable machining The primary benefit of a rigid workholding component is repeatability. Built from high-strength cast steel, this angle clamp offers a mass and stiffness that resist chatter and flex under cutting loads. The combination of material density and engineered geometry improves positional stability, reducing the risk of workpiece movement during milling, drilling or light grinding operations. As a result, set-up tolerances are easier to maintain and downstream rework is reduced, which supports higher throughput and consistent part quality. Compact footprint that fits modern workshop workflows With a nominal footprint of 6 x 4-1/2 x 5 in, the unit is compact enough to integrate into crowded benches and vice-mounted fixtures without sacrificing contact area. The small footprint simplifies fixturing and allows close access for tooling and inspection probes, while the 3.2 kg mass provides damping where a lightweight clamp would transmit vibration. This makes the component suitable for inspection benches as well as production machines where floor space and fixture real estate are at a premium. Low-maintenance robustness for reliable production A robust casting reduces the need for frequent replacement and keeps fixture inventories lean. The durable construction resists deformation from repeated clamping cycles, preserving reference faces and alignment points over time. For operations that require dependable workholding day after day, this approach minimises interruptions and supports predictable maintenance schedules. The result is a practical balance between longevity and straightforward handling that complements standard workshop procedures. Contact Metav Werkzeuge for tailored ordering advice and precise compatibility checks for the VR-60 Angle Clamp — reliable supply from Emmerich and expert consultation available. Technical Data SKU: VR-60 GTIN: 4061905091841 Eclass: 21020601 Facts Dimensions: 6 x 4-1/2 x 5 in Weight: 3.2 kg Special features Material: high-strength cast steel Manufacturer: Vertex FAQ What applications is this angle clamp suited for? The VR-60 Angle Clamp is intended for precision machining and inspection support where a rigid workholding solution is required, including milling, drilling and bench-based measurement setups. How does the material affect performance? The high-strength cast-steel construction of the VR-60 provides enhanced stiffness and damping, improving dimensional stability and reducing the likelihood of chatter during machining. Is the clamp compatible with standard vices and fixtures? Yes, the compact 6 x 4-1/2 x 5 in footprint of the VR-60 allows integration with common vices and fixture plates used in machine shops and inspection benches. How much does the angle clamp weigh and why does that matter? Weighing 3.2 kg, the unit provides sufficient mass to damp vibrations, which helps maintain positional accuracy during cutting and measuring operations. Who manufactures the VR-60 and where is it supplied from? Vertex manufactures the VR-60 Angle Clamp; Metav Werkzeuge supplies the product from its European distribution hub for reliable local delivery. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6x6x6" Angle Plate High-Strength Cast Steel, 0.01mm Accuracy, 7kg - Vertex
Combine the high-strength cast steel construction with 0.01 mm accuracy and a solid 7 kg mass to secure reliable right-angle fixturing and repeatable inspection set-ups; order the angle plate directly via Metav Werkzeuge or consult our specialists for application-specific advice. Angle plate VR-66 — Vertex precision angle plate with 0.01 mm accuracy and cast-steel construction The angle plate VR-66 is a right-angle fixture designed for secure workpiece support, repeatable alignment and inspection in machine shops and metrology benches. High-strength cast steel construction 0.01 mm accuracy for precise set-ups Solid 7 kg mass for vibration damping Stable reference for accurate set-ups A machined right-angle fixture provides a dependable datum for positioning and inspection. Built from high-strength cast steel, the plate’s mass and structure reduce vibration and deflection, delivering consistent stability during clamping and measurement tasks. For workshop applications this means fewer rechecks and shorter set-up times, since a stable reference surface keeps geometries true while workpieces are secured for milling, drilling or gauging operations. Precision explained: what 0.01 mm achieves in practice An accuracy of 0.01 mm denotes that the reference surfaces are finished to tight tolerances, suitable for demanding inspection and layout work. In practice this level of precision ensures right-angle relationships are maintained within small margins, which benefits tasks such as square checks, bore alignment and finish machining set-ups. The measurable tolerance reduces uncertainty in downstream operations and supports quality control routines that rely on repeatable fixturing. Made for workshop use: durability and simple integration The selection of high-strength cast steel offers wear resistance and thermal stability compared with softer materials; the robust 7 kg mass aids in damping machining vibrations. The design integrates readily with standard clamping systems and inspection benches, providing a practical solution for everyday jigs and fixtures. With minimal maintenance—periodic cleaning and corrosion protection of machined faces—the component remains a lasting part of a productive fixturing workflow and aligns with professional workshop standards. Arrange supply or application advice for the Vertex angle plate VR-66 through Metav Werkzeuge in Emmerich; our consultants can recommend matching clamping accessories or delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VR-66 GTIN: 4061905090820 eClass: 21170130 Dimensions & mass Dimensions: 6 x 6 x 6 (as provided) Weight: 7 kg Accuracy: 0.01 mm Materials & features Material: high-strength cast steel Brand: Vertex Product type: angle plate FAQ What is the primary purpose of this angle plate? The angle plate VR-66 is intended as a precision right-angle fixture for clamping, inspection and set-up tasks where a stable reference surface is required. Can the VR-66 be used directly on a machining centre or only on inspection benches? The VR-66 from Vertex is suitable for both inspection benches and workshop fixturing; its mass and cast-steel construction provide stability during light machining and layout operations. How does the 0.01 mm accuracy affect everyday use? An accuracy of 0.01 mm means the machined faces maintain tight right-angle relationships, reducing the need for repeated alignment checks and improving repeatability in measurement and finishing tasks. What maintenance is required to keep the plate accurate? Regular cleaning of the machined faces and protection from corrosion are the primary maintenance steps to preserve the accuracy and longevity of the VR-66. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
6–25mm Collet Set 7 Pc 5C With 6/8/10/12/16/20/25mm Collets – Vertex
Take advantage of the combination of precise clamping, a practical range of sizes and robust workshop usability for reliable machining results; order the set directly via Metav Werkzeuge or ask the consultants for application advice. 5C Collet Set VE-102 — 7-piece precision collets, sizes 6–25 mm, Vertex The 5C collet set is a compact clamping solution designed for accurate workpiece holding in workshop and toolroom operations. 5C collet set, 7 pieces Sizes 6–25 mm for common tasks Runout tolerance 0.02 mm for precision Compact set weight approx. 1.5 kg Consistent concentricity for superior machining quality The 5C collet set (VE-102) delivers a high degree of precision thanks to a specified runout tolerance of 0.02 mm, which keeps workpieces centred and reduces vibration during cutting. This level of concentricity directly contributes to an improved surface finish and less rework, particularly when performing light milling, drilling or turning operations in the toolroom. By maintaining stable clamping, the set supports predictable tool life and repeatable production results. Practical size range reduces setup changes and downtime Supplied as a 7-piece assortment with sizes 6–25 mm, the collection covers the most common shaft and bar diameters encountered in daily workshop tasks. The range of collet diameters allows rapid changeovers between components, cutting down setup time and improving throughput. The compact format and moderate weight make the set convenient to store beside a machine or in a tool cabinet, ensuring the right clamping option is always at hand without unnecessary bulk. Workshop-grade reliability and a trusted supply chain Manufactured to the 5C system standard, the set is intended for durable, everyday use in maintenance and small-series production environments. The precise tolerances support consistent results across repeated cycles, while the set configuration simplifies inventory and procurement for workshops. Metav Werkzeuge acts as a quality filter for the European market, combining decades of toolroom expertise with broad product availability—backed by a large customer base and comprehensive stock—so that reliable clamping solutions remain both accessible and dependable. For detailed suitability checks or to discuss machine compatibility for the Vertex 5C collet set (VE-102), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VE-102 GTIN: 4061905095153 Manufacturer: Vertex Facts Accuracy / runout: 0.02 mm Length: 87 mm Weight: 1.5 kg Pieces per set: 7 Special features Contents: collets 6 / 8 / 10 / 12 / 16 / 20 / 25 mm 5C collet system Set: yes FAQ What sizes are included in the set? The set contains collets in 6, 8, 10, 12, 16, 20 and 25 mm as standard workshop sizes, supplied together as the Vertex 5C collet set (VE-102). What does the 0.02 mm runout specification mean for accuracy? A runout tolerance of 0.02 mm indicates the expected concentricity when the collet grips a workpiece; for the VE-102 this supports consistent surface quality and reduced vibration during machining. Is this set suitable for both milling and turning tasks? Yes, the 5C collet system in this set is commonly used for general workshop milling and light turning where standard 5C clamping is applicable. How many pieces are in the set and how is it supplied? The product is supplied as a 7-piece set containing the listed collet diameters; the SKU for ordering is VE-102. Can the collets be used on standard 5C chucks and fixtures? The collets are manufactured to the 5C system standard and are intended for use with compatible 5C chucks and fixtures, ensuring straightforward integration into existing toolroom equipment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
7,000 N Horizontal Toggle Clamp With Safety Lock, Zinc Plated, 65mm Thread Length - Kukamet
Take advantage of the combination of reliable clamping force, compact zinc-plated construction and a vibration-proof safety lock for consistent fixture performance; order the 371-4-L directly via Metav Werkzeuge or consult our experts for specification support. 371-4-L Toggle Clamp (371 light series) — Horizontal base, Safety lock — Kukamet The 371-4-L Toggle Clamp is a compact horizontal-base closure clamp designed for secure, repeatable workholding in light industrial fixtures and assembly jigs. Horizontal base for stable mounting Safety lock for vibration-proof clamping 7,000 N clamping force for secure holding Zinc-plated finish for corrosion resistance Faster, more reliable clamping for small series production The 371-4-L provides a definable clamping force of up to 7,000 N and a holding force rated to 8,000 N, delivering a measurable improvement in part security compared with generic manual clamps. In practice, this means fewer relocated parts during machining or assembly and a lower rate of rework. The mechanical design converts lever travel into a firm lock, so operators benefit from quicker fixture cycles and consistent repeatability without complex adjustment. Explaining the numbers: clamping force denotes the axial pressure applied to the workpiece, while holding force indicates the load the closed clamp resists before release — both are key to predictable process outcomes. Robust finish and compact footprint for workshop integration Constructed with a zinc-plated surface treatment and weighing approximately 0.815 kg, the device offers corrosion resistance and a low mass that suits confined jig layouts. The horizontal base mounting allows direct attachment to flat tooling plates and reduces vertical profile, saving space when multiple clamps are used in close proximity. The included hook allows quick engagement with mating fixtures, reducing set-up time. For engineers specifying fixtures, this combination supports a compact, durable solution that integrates easily into existing tooling without the need for additional corrosion protection. Safety lock and hook for vibration-prone environments Equipped with an integrated safety lock, the clamp secures the lever against unintended opening, an important safeguard when fixtures are exposed to vibration or impact. The locking mechanism prevents loss of clamping pressure during intermittent operations, maintaining positional accuracy across cycles. The simple mechanical hook provides positive engagement and facilitates fast manual operation without sacrificing safety. As a result, the component is particularly suitable for assembly lines, test benches and light machining processes where operational safety and steady clamping are priorities. Contact Metav Werkzeuge today for reliable supply and expert advice on integrating the 371-4-L toggle clamp into production fixtures — Metav Werkzeuge provides stock-backed delivery from Emmerich and technical guidance to ensure the clamp meets application requirements Technical data Article number: 371-4-L GTIN: 8682843521106 Manufacturer: Kukamet Series: 371 light series Facts Clamping force max: 7,000 N Holding force max: 8,000 N Weight: 0.815 kg Thread length: 65 mm Special features Finish: zinc-plated Mounting: horizontal base Safety lock: included With hook: yes eClass: 21041718 ETIM: EC011973 FAQ What maximum clamping force does the clamp deliver? The 371-4-L toggle clamp delivers a maximum clamping force of 7,000 N and a holding force of 8,000 N, providing firm, measurable retention for light-duty fixtures. Is the clamp suitable for use in humid or corrosive workshop environments? The zinc-plated finish of the 371-4-L offers corrosion resistance suited to standard workshop conditions; for aggressive environments additional surface protection should be considered. How is the clamp mounted to a fixture plate? The clamp uses a horizontal base for stable mounting to flat tooling plates; the design supports low-profile integration into jigs and assembly fixtures. Does the clamp include a safety feature to prevent accidental release? Yes, the 371-4-L is fitted with a safety lock that secures the lever against unintended opening, enhancing performance in vibration-prone applications. Can the clamp be engaged quickly during manual production? The integrated hook and lever geometry enable rapid manual engagement and release, reducing set-up time while maintaining secure clamping. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7-3/8" Collet Chuck VCL-8C Lightweight 1.75 kg, 345x161mm - Vertex
Secure clamping, the 7-3/8" opening and a 114.3 mm throat depth combine to make the VCL-8C a practical choice for steady, repeatable setups. Robust build and compact dimensions support reliable handling and less downtime. Order the collet directly via Metav Werkzeuge or ask our consultants for application advice. VCL-8C Vertex precision collet with 7-3/8" opening The VCL-8C is a precision collet designed for industrial clamping tasks where a secure hold and deeper reach are required, making it suitable for production benches and specialised fixtures. Collet for secure clamping with 7-3/8" opening Throat depth 114.3 mm for deeper reach Robust construction, weight 1.75 kg Compatible with Vertex clamping accessories Consistent hold for accurate machining results The collet design delivers a concentric grip that helps maintain part alignment during machining, reducing the need for repeated adjustments. With its defined 7-3/8" opening, this clamping element enables reliable engagement for parts that fit within that maximum envelope. The result is improved process stability and fewer rejects, which supports predictable cycle times and a stronger production flow. Reach further without sacrificing stability A throat depth of 114.3 mm allows access to deeper features and facilitates work on longer components without additional fixturing. Combined with compact dimensions of 345 x 161 mm and a mass of 1.75 kg, the unit balances reach and rigidity, limiting vibration and contributing to consistent surface finishes. This configuration reduces the number of repositioning steps, saving set-up time and increasing throughput. Integrates with workshop systems and reduces complexity Engineered for the clamping-technology environment, the device fits seamlessly into existing Vertex-based setups and accessory lines. Its straightforward geometry simplifies installation and maintenance, supporting efficient changeovers. Metav’s role as a quality filter for the European market ensures that the component arrives ready for immediate use in industrial and craft workshops, backed by decades of delivery experience and a broad product range. Proven fit for professional environments Manufactured by Vertex and identified by SKU VCL-8C, the unit meets the expectations of professional users who require dependable clamping solutions. The compact footprint and focused feature set make it a pragmatic choice where space, accessibility and repeatability matter. Selecting proven components like this helps stabilise processes and supports long-term operational reliability. Discuss specific applications with Metav Werkzeuge — our consultants in Emmerich will advise on integrating the Vertex VCL-8C into existing workflows and help specify the correct clamping arrangement for best results. Technical data Article number: VCL-8C GTIN: 4061905090493 Manufacturer: Vertex Facts Weight: 1.75 kg Dimensions: 345 x 161 mm Throat depth: 114.3 mm Special features Opening: 7-3/8" Category: Clamping technology SKU: VCL-8C FAQ What size opening does the collet support? The VCL-8C supports an opening of 7-3/8", which defines the maximum workpiece envelope for secure clamping. How deep can the VCL-8C reach into a workpiece? The throat depth of 114.3 mm for the VCL-8C provides extended access for longer components without extra fixturing. What are the physical dimensions and weight? The unit measures 345 x 161 mm and weighs 1.75 kg, giving a compact footprint with good rigidity for stable clamping. Who manufactures this collet and where is it from? The VCL-8C is produced by Vertex; the SKU VCL-8C and GTIN 4061905090493 identify the item for procurement and inventory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com