Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
70mm Axial Tool Holder C1 DIN 69880 External Coolant Right-Hand, H1 20mm - TECWERK
Take advantage of the combination of C1 form compatibility, external coolant feed and a VDI30 interface for consistent, high-throughput machining. Order the axial tool holder directly via Metav Werkzeuge or ask our consultants for application support. Axial Tool Holder C1, DIN 69880 VDI30 (right-hand) — TECWERK The Axial Tool Holder C1 DIN 69880 VDI30 (right-hand) is a precision spindle-mounted toolholder designed for axial tooling operations with external coolant supply and DIN 69880 flange compatibility. Right-hand C1 form, DIN 69880 compatible External coolant feed for tool lubrication VDI30 interface for secure spindle mounting Compact dimensions: h1 20 mm, l1 70 mm Consistent mounting for repeatable machining results The holder is engineered to meet the DIN 69880 specification and interfaces via VDI30, which together deliver a defined clamping geometry and precision alignment. This results in improved repeatability between tool changes and reduced setup variance on serial production runs. For production environments where cycle-time and part tolerance are critical, the standardised flange and interface reduce spindle wear and ensure predictable tool positioning across shifts. External coolant feed to extend tool life and improve finishes The integrated external coolant feed supplies cutting fluid directly to the tool shank, supporting effective cooling and improved chip evacuation. Better cooling reduces thermal growth in the cutting zone, which helps maintain dimensional stability and prolong tool life. For aluminium, steels or mixed-material batches, the directed coolant feed supports cleaner cuts and more consistent surface finish, reducing downstream rework and increasing first-time-right yields. Compact footprint and clear dimensional compatibility With a compact footprint and defined dimensions such as h1: 20 mm and l1: 70 mm, the toolholder fits efficiently in standard VDI turrets and spindle adapters. The C1 form designation ensures compatibility with machines expecting this geometry, while the VDI30 interface provides a familiar mounting for many lathes and machining centres. The compact design aids in reduced overhang, which in turn lowers bending moments and improves stability during axial cutting operations. Practical handling, installation and production benefits The combination of standardised flange geometry and precise measured dimensions simplifies installation and inspection. The clear dimensional data allow engineering teams to verify run-out tolerances and adapt process parameters without lengthy trial runs. While the holder is designed for industrial use, maintenance remains straightforward thanks to the accessible coolant channel and robust construction, supporting consistent uptime in high-mix or continuous production environments. For tailored advice on integrating TECWERK axial tool holders into existing VDI30 systems or for supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by email or phone to discuss specifications and delivery options. Technical data Article number: 2000833653NW Product: Axial tool holder C1 DIN 69880 VDI30 right-hand Brand: TECWERK Core dimensions h1: 20 mm h5: 28 mm h6: 38 mm b1: 70 mm b2: 35 mm b3: 17 mm d1: 30 mm l1: 70 mm l2: 10 mm Features Form: C1 Orientation: right-hand Coolant: external coolant feed Standard: DIN 69880 Interface: VDI30 Packaging unit: 1 FAQ What machines is this toolholder compatible with? The axial tool holder C1 DIN 69880 VDI30 (right-hand) is compatible with spindles and turret systems that accept the DIN 69880 flange and VDI30 interface, making it suitable for many lathes and machining centres that follow these standards. Does the holder support coolant-through tooling? Yes. The holder features an external coolant feed, which supplies coolant to the tool shank externally and aids cooling and chip control during axial cutting operations. Which dimensions are most relevant for integration checks? Key dimensions for integration are h1: 20 mm and l1: 70 mm, alongside the flange geometry defined by C1 form and the VDI30 interface to ensure correct mounting and minimal overhang. Is the product suitable for high-volume production? Designed for consistent repeatability and a standardised flange interface, the TECWERK axial tool holder is well suited to high-volume production where reliable tool mounting and coolant management improve uptime and part quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
70mm Axial Tool Holder C3 DIN 69880 Right-Hand Overhead External Coolant - TECWERK
Benefit from the combination of Form C3, DIN 69880 / VDI30 compliance and an external coolant feed for consistent, repeatable axial clamping in CNC production; order the holder via Metav Werkzeuge or consult our specialists for integration advice. Axial tool holder C3 (DIN 69880, VDI30) — right‑handed, overhead, external coolant — TECWERK The Axial tool holder C3 (VDI30, DIN 69880) is a right‑handed, overhead orientation holder designed for axial clamping with an external coolant feed, suitable for standardised CNC toolholding systems. Form C3 right‑handed design External coolant supply Complies with DIN 69880 VDI30 h1 20 mm axial length Precision and standardised compatibility for reliable production This axial tool holder delivers repeatable clamping through its Form C3 geometry and adherence to DIN 69880 and VDI30 specifications, ensuring compatibility with machines and turrets that rely on standard tool interfaces. The standard conformity reduces setup times and prevents mismatch errors during tool changes. By using a holder built to established norms, workshops gain predictable runout behaviour and easier integration into existing tool‑management routines, supporting tight tolerances and stable process control. Enhanced cooling and longer tool life through external coolant The external coolant feed directs coolant efficiently along the tool shank and cutting zone, improving heat dissipation and chip evacuation under heavy axial loads. This results in reduced thermal deformation and extended insert life for many milling and turning operations. The design supports consistent cutting conditions during extended cycles, which translates into fewer tool interventions and higher effective machining uptime—advantages that are particularly relevant for batch production and mixed‑model schedules. Clear mounting dimensions for straightforward machine integration Key measures such as h1: 20 mm, d1: 30 mm and l1: 70 mm provide a concise reference for machine compatibility checks and fixture planning. These numerical values allow technicians to verify turret clearance, axial reach and the required envelope before commissioning. The holder’s form reduces ambiguity during procurement and ensures that replacement items meet the original machine interface—minimising downtime and simplifying stock management for toolrooms and production planners. Operational benefits and why this TECWERK option is suitable for workshops Selecting this TECWERK holder delivers pragmatic advantages: dependable mechanical interface, standardised fitment and improved coolant management. For purchasing and maintenance teams, the combination of standard compliance and measured dimensions simplifies spare‑parts strategies and supports predictable maintenance intervals. Metav Werkzeuge acts as a reliable distribution partner with an extensive product range and local stock in Emmerich, enabling rapid replenishment and technical clarification when required. For application advice, availability and order placement of the TECWERK axial tool holder (SKU 2000833657NW), contact Metav Werkzeuge — specialists for precision toolholding and workshop supply, ready to assist with selection and compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000833657NW Label: Axialwerkzeughalter C3 DIN 69880 VDI30 re.Überkopf TECWERK Brand: TECWERK Product type: Axial tool holder Dimensions & measurable data h1: 20 mm b2: 35 mm d1: 30 mm h5: 38 mm b3: 17 mm h6: 35 mm l2: 10 mm l1: 70 mm b1: 70 mm Features & standards Form: C3 Orientation: right‑handed, overhead Coolant: external coolant supply Standard: DIN 69880, VDI30 Package unit: 1 FAQ What standards does the holder meet? The holder conforms to DIN 69880 and VDI30, ensuring standardised interface and interchangeability; the Axial tool holder C3 is manufactured to these norms. Is the holder suitable for overhead mounting and right‑hand applications? Yes, the design is right‑handed with an overhead orientation, which is specified for the Axial tool holder C3 and supports appropriate turret or spindle configurations. How does the external coolant feed affect machining performance? The external coolant feed improves heat removal and chip evacuation at the cutting edge, which helps maintain cutting conditions and supports longer tool life when using the axial holder. Which dimensions are most important for machine compatibility checks? Critical measures include h1: 20 mm, d1: 30 mm and l1: 70 mm; these dimensions are used to confirm turret clearance and axial reach for the Axial tool holder C3. What is the SKU and packaging unit for ordering? The SKU is 2000833657NW and the item is supplied as package unit 1 for the TECWERK axial tool holder. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
70mm Axial Tool Holder C4 Left Overhead External Coolant DIN 69880 - TECWERK
Take advantage of the combination of precise DIN 69880 interface, left-hand overhead orientation and external coolant feed for consistent machining results; order the axial tool holder directly via Metav Werkzeuge or ask our consultants if needed. Axial tool holder C4, DIN 69880 VDI30 (left-hand, overhead) – TECWERK The Axial tool holder C4 VDI30 (left-hand, overhead) is a precision clamping solution for CNC turning and milling applications that require a left-hand orientation and external coolant feed for improved chip evacuation. *Form C4 for compact axial positioning *Left-hand orientation for reverse operations *External coolant supply for enhanced cooling *Compliant with DIN 69880 VDI30 interface Reliability from the standardised interface The DIN 69880 connection with VDI30 interface ensures repeatable axial alignment and secure clamping in tool turrets and heads. Standardisation reduces set-up time and the risk of misfits when swapping holders, which keeps machining tolerances consistent across production batches. The specification Form C4 describes the axial geometry and seating that deliver stable support during radial loads; this results in fewer reworks and predictable tool life, a clear advantage for precision-oriented workshops and subcontract manufacturers. Designed for left-hand, overhead machining with active cooling A left-hand, overhead configuration provides reliable clearance and orientation for operations where reverse rotation or specific tool geometry is required. The integrated external coolant supply channels coolant towards the cutting zone for improved temperature control and chip flushing, which helps maintain tool performance under prolonged cutting. Key dimensions such as h1: 20 mm and l1: 70 mm inform the effective reach and axial positioning, supporting correct tool projection and minimising chatter in hard-to-access set-ups. Compact dimensions for fast changeovers and stable mounting Compact measurements and defined seating keep changeovers efficient. Critical dimensions such as b4: 76 mm, d1: 30 mm and l2: 10 mm indicate the envelope and mounting interfaces, enabling planners to verify clearance and turret compatibility quickly. The overhead orientation and measured profile help to balance rigidity with accessibility, reducing fixture conflicts and enabling quicker manual interventions when required. Delivered as a single unit per packaging, the holder is suited for workshops aiming to streamline tooling inventories without sacrificing machine uptime. Contact Metav Werkzeuge today to confirm compatibility with existing VDI30 systems or to request procurement of the TECWERK axial tool holder with DIN 69880 interface Technical data Article number: 2000833659NW Label: Axial tool holder C4 DIN 69880 VDI30 left-hand overhead TECWERK Product type: Axial tool holder Manufacturer: TECWERK Packaging unit: 1 Dimensions & measurable data h1: 20 mm b4: 76 mm d1: 30 mm h5: 38 mm b5: 41 mm b6: 23 mm h6: 35 mm l2: 10 mm l1: 70 mm Features & standards Form: C4 Orientation: left-hand Mounting: overhead Coolant: external coolant supply (outer feed) Standard: DIN 69880 Interface: VDI30 FAQ Is this holder compatible with standard VDI30 turrets? The axial tool holder C4 complies with the DIN 69880 specification and the VDI30 interface, so it is suitable for standard VDI30 turrets when the turret accepts left-hand overhead holders. Can the holder be used where external coolant is required? Yes, the TECWERK axial holder features an external coolant supply designed to direct coolant towards the cutting zone for improved chip removal and cooling. What does Form C4 mean for mounting and rigidity? Form C4 describes the axial seating geometry and axial positioning of the holder; the design promotes stable clamping and predictable axial support during machining. Are the listed dimensions sufficient to check fitment in a turret or tool head? The provided dimensions such as h1, l1 and b4 enable planning for clearance and tool projection to confirm fitment in a turret or tool head. Is the holder suitable for reverse or left-handed operations? Yes, the left-hand orientation of the holder is intended for reverse or left-handed tool arrangements where such orientation is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
70mm Cold Light Photoelectric Sensor 15W, 1.8m Cable Included - Vertex
The combination of cold-light illumination and a compact 70 mm housing ensures consistent, low-heat optical detection with modest power consumption. With a lightweight construction and an included 1.8 m connection cable, the unit is ready for straightforward integration into production and inspection systems. Order the light barrier directly via Metav Werkzeuge or ask the consultants for tailored advice. VHL-W15DB light barrier by Vertex — cold-light optical detection, 15 W power VHL-W15DB is a compact light barrier designed for precise optical detection in industrial environments; it delivers reliable sensing performance with cold-light illumination suitable for temperature-sensitive applications. Cold-light LED illumination 15 W power consumption 70 mm diameter housing Includes 1.8 m connection cable Stable detection with low thermal impact The VHL-W15DB light barrier uses cold light to provide bright, stable illumination while keeping thermal input to a minimum. This characteristic reduces heat transfer to nearby components and supports repeatable optical detection over extended runs. The modest 15 W power draw combines effective signalling with energy efficiency, making the device well suited for continuous operation where heat management and power budgets are important. Space-saving design for simple integration A compact housing with a 70 mm diameter and a length of 717 mm keeps the sensor footprint small while still delivering a robust sensing head. The relatively low mass (3.5 kg) simplifies handling and mounting and reduces the load on support structures. These physical characteristics help with positioning the device in constrained machine spaces and support tidy cable routing and alignment in production lines. Ready-to-use connectivity and consistent workflow integration Supplied with an 1.8 m cable, the unit is prepared for immediate connection to machine controls or signal processing modules, reducing the need for additional on-site wiring materials. Clear identification via the VHL-W15DB SKU and GTIN supports procurement and inventory processes, while the straightforward electrical requirement (15 W) eases system planning for power distribution and backup strategies. Practical benefits for inspection and automation applications By combining a low-heat light source and compact mechanics, the sensor supports sensitive inspection tasks and automated sequences where thermal influence and spatial constraints matter. The concise specification set enables planners and technicians to assess integration effort quickly and to standardise sensor deployment across multiple workstations or machines. Contact Metav Werkzeuge for advice on integrating the Vertex VHL-W15DB into existing production lines or to request procurement details from Metav Werkzeuge's consultants at info@metav-werkzeuge.com Technical data Article: Light barrier (with cold light) SKU: VHL-W15DB GTIN: 4061905088001 Brand: Vertex Facts Diameter: 70 mm Length: 717 mm Weight: 3.5 kg Power: 15 W Special features Includes cable 1.8 m Cold-light illumination Category: Vertex FAQ What is the VHL-W15DB? The VHL-W15DB is a light barrier (optical sensor) from Vertex intended for precise detection tasks; it combines cold-light illumination with compact mechanics for industrial use. What are the electrical requirements of this unit? The device operates with a power consumption of 15 W. What are the physical dimensions and weight? Diameter 70 mm, length 717 mm, weight 3.5 kg. Is a connection cable included? Yes — the VHL-W15DB is supplied with a 1.8 m connection cable. How is the product identified for ordering and stock? Ordering and inventory reference: SKU VHL-W15DB, GTIN 4061905088001. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
70mm Horizontal Clamp With Angle Base Size 3 M8x45 Pressure 1800N Holding 2500N - AMF
Take advantage of a compact, flexible clamping solution that combines a right-angled mounting foot with a size 3 form factor and clear force ratings; the combination of 1,800 N max clamping force and 2,500 N holding force ensures secure workholding for light to medium machining tasks. Order the horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp No. 6833, size 3, angled foot (AMF) — robust clamping with 1,800 N clamping force The Horizontal clamp No. 6833, size 3, angled foot (AMF) is a compact horizontal workholder designed for fixture plates and machine tables where angled mounting improves accessibility and setup flexibility Size 3 with angled foot Max clamping force 1,800 N Holding force up to 2,500 N Secure, measurable clamping for repeatable production The clamp delivers clearly defined performance: a maximum clamping force of 1,800 N for active clamping operations and a holding force of 2,500 N for static retention. These figures provide a reliable basis for process planning and tool-path strategy, allowing production engineers to calculate fixture loads and select suitable cutting data. The rated forces are particularly important in jigs for milling and drilling where consistent contact pressure reduces part movement and improves dimensional repeatability. The specified values help avoid guesswork and support predictable cycle times. Flexible mounting and practical dimensions for compact fixtures Fitted with an angled foot, the clamp adapts to tight layouts and angled fixturing without additional brackets. The integrated pressing screw M8 x 45 and a clear overall length L1 206 mm enable straightforward installation on T-slots and fixture plates. The right-angled base reduces horizontal space while providing a stable bearing surface, which simplifies set-up for small-batch production and repair work. The clamp’s geometry supports quick positioning and alignment, reducing non-productive time during changeovers. Practical robustness for workshop and small-series applications Designed as a purpose-built horizontal workholder, the component balances compactness with stable retention. The sturdy construction that yields high holding capacity is suitable for assembly stations and machining centres handling light to medium workpieces. Maintenance is minimal: the simple mechanical design limits wear parts to the pressing screw and contact surfaces, allowing long service intervals and uncomplicated replacement procedures. This makes the clamp a practical choice for workshops seeking dependable, low-maintenance fixturing. Contact Metav Werkzeuge for tailored advice on integrating the AMF horizontal clamp No. 6833 into existing fixtures, with fast supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 4123660130NW Type: 6833 Label: Waagrechtspanner Nr.6833 Gr.3 Winkelfuß AMF Manufacturer: AMF Packaging unit: 1 Facts Max clamping force: 1,800 N Max holding force: 2,500 N Size: 3 Pressing screw: M8 x 45 Overall length L1: 206 mm H: 70 mm; H1: 86.5 mm; H2: 86 mm Special features Angled foot for right-angled mounting Angle a: 90° A: 8 mm; B: 59 mm; C: 24 mm; D: 6.8 mm; E: 37 mm; F: 6.5 mm I: 15 mm; K: 7 mm; M: 28.5 mm; N: 42.5 mm; P: 38 mm FAQ What clamping and holding forces can be expected from this clamp? The AMF horizontal clamp No. 6833 (SKU 4123660130NW) provides a maximum clamping force of 1,800 N and a holding force of up to 2,500 N for secure retention during machining. Is the clamp suitable for mounting on fixture plates with T-slots? Yes, the angled foot and the overall length of 206 mm make the clamp compatible with common fixture plates and T-slot arrangements when combined with the M8 x 45 pressing screw. Which applications suit this horizontal clamp best? The clamp is well suited to small-series machining, assembly stations and jigs where compact, repeatable clamping and easy access are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm Horizontal Clamp With Automatic Height Adjustment, 2.5kN Clamping Force, 217mm Reach - BESSEY
Combining automatic clamping-height adjustment with a stable horizontal base plate and a max. clamping force of 2,500 N, this clamp secures varying workpiece thicknesses quickly and reliably; ideal for jigs and fixture use in production and workshops. Order the clamp directly via Metav Werkzeuge or consult the technical team for application support. BESSEY STC-HH70 Horizontal clamp – Automatic height adjustment, horizontal base plate The STC-HH70 is a horizontal hold-down clamp designed for jigs, fixtures and general workshop use, offering automatic clamping-height adjustment to accommodate variable material thickness. Automatic clamping-height adjustment Horizontal base plate for stable mounting Max. clamping force 2,500 N Compact size 70 with 217 mm reach Faster, more reliable clamping for mixed production The combination of automatic clamping-height adjustment and a max. clamping force of 2,500 N delivers consistent results across mixed batches and single-part operations. The height compensation prevents overtravel and reduces setup time by absorbing variations in workpiece thickness without manual intervention. For production planners, this means fewer stoppages for re‑adjustment and a measurable improvement in cycle reliability. The clamp is particularly suited to repetitive holding tasks where repeatability and steady clamping pressure matter. Simple integration and stable mounting reduce downtime Fitted with a horizontal base plate, the unit provides a firm mounting interface for fixture plates and assembly jigs. The 217 mm reach (L1) and compact footprint allow positioning close to the work area while maintaining clearance for tooling. Clear dimensional data (A, B, C, E, H1, I, M, N, P) support precise layout planning and ensure compatibility with existing fixtures. The clamp’s design reduces the need for custom adaptors and speeds up commissioning in both small workshops and production lines. Practical benefits for workshop and industrial use Constructed for everyday workshop conditions, this horizontal hold-down solution suits metalworking, assembly and fixture building where predictable clamping is required. The automatic adjustment protects delicate components from excessive force while still enabling high holding power when needed, improving handling safety and part integrity. With its compact size and stable mounting, the clamp aids ergonomic workbench design and contributes to a tidier, more efficient workflow. Contact Metav Werkzeuge for tailored application advice or to request a technical quote for the BESSEY STC-HH70; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000831135NW Model: STC-HH Label: Waagrechtspanner STC-HH70 Gr.70 waagrechte Grundpl.BESSEY Product type: Horizontal clamp Execution: automatic clamping-height adjustment Packaging unit: 1 Manufacturer: BESSEY UID: 4000831135NW Facts Max. clamping force: 2,500 N Size: 70 A: 13 mm B: 77 mm C: 25.4 mm E: 40 mm H1: 44 mm I: 14 mm L1: 217 mm M: 33–48 mm N: 60 mm P: 53 mm Special features Automatic clamping-height adjustment Horizontal base plate Compact design for tight layouts Suitable for jigs and fixtures Stable, repeatable holding force FAQ What is the maximum clamping force of this clamp? The BESSEY STC-HH70 horizontal clamp provides a maximum clamping force of 2,500 N, suitable for secure holding in many workshop and light industrial applications. How does the automatic clamping-height adjustment work? The clamp’s automatic height adjustment compensates for variations in workpiece thickness, allowing controlled travel and consistent clamping pressure without manual re‑setting, which speeds up setup and reduces errors. Which dimensions are most relevant for planning a fixture? Key dimensions include the 217 mm reach (L1) and the adjustment range M: 33–48 mm; the full set of measurements (A, B, C, E, H1, I, N, P) supports precise fixture layout and alignment. Is the clamp suitable for use in production jigs and assembly lines? Yes. The horizontal hold-down design and stable base plate make it well suited for jigs, fixtures and repetitive assembly tasks where fast, repeatable clamping is required. Does the clamp require special mounting hardware? The base plate provides a standard mounting surface for direct attachment to fixture plates; any additional adapters depend on the individual jig design rather than on the clamp itself. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm Light Barrier With Cold Light, 18W, 1.8m Cable - Vertex
Combining low power consumption (18 W), a compact form factor (70 mm diameter, 525 mm length) and an integrated 1.8 m cable, the unit delivers stable detection with straightforward installation and minimal setup. Order the VHL-W18DB-PL directly via Metav Werkzeuge or ask our consultants if needed. VHL-W18DB-PL Photoelectric light barrier with 18 W cold-light illumination — Vertex VHL-W18DB-PL is a compact photoelectric sensor built to provide neutral, cold-light illumination for precise object detection and inspection in workshop and industrial environments. Consistent cold-light illumination Compact 70 mm diameter housing Includes 1.8 m connection cable Stable detection through cold-light illumination The VHL-W18DB-PL is designed as a photoelectric sensor that combines a cold-light source with controlled power consumption (18 W) to ensure consistent detection across varied inspection tasks. Cold-light reduces colour shifts and thermal impact on the measured surface, which benefits visual inspection and measurement-adjacent processes. The unit’s spectral characteristics support repeatable detection results, improving process reliability and reducing false triggers in automated sequences. Space-saving design that simplifies mounting A slim 70 mm diameter and 525 mm length enable installation in confined spaces where larger fixtures would be impractical. The compact housing and a modest weight (2 kg) make the device easy to position and secure on conveyor frames, inspection rigs or mounting brackets. The supplied 1.8 m cable minimises additional wiring work and speeds commissioning, while the straightforward mechanical footprint lowers the need for custom adaptors or extended downtimes during retrofit phases. Practical integration for workshop productivity Engineered for industrial use, the unit supports quick electrical integration and predictable operation, which translates into reduced cycle interruptions and higher throughput. Minimal thermal output and stable light characteristics mean fewer adjustments during shift changes. As a complement to a precision-oriented tool supply, this sensor aligns with the quality-first approach of Metav Werkzeuge and its role as a dependable parts and systems partner for trade and industry. Suitable applications and operational benefits The device is well suited to detection, presence control and basic inspection tasks in assembly lines, sorting stations and measurement benches. The neutral illumination preserves material contrast for cameras or visual checks, while a compact form factor keeps obstructions to a minimum on busy workstations. The unit’s mechanical and electrical simplicity supports quick serviceability and low-maintenance operation, contributing to long-term uptime. Contact Metav Werkzeuge for tailored advice and prompt delivery: email info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 for technical selection and order handling. Technical data Article number: VHL-W18DB-PL GTIN: 4061905088346 Brand: Vertex Facts Power: 18 W Diameter: 70 mm Length: 525 mm Weight: 2 kg Special features Cold-light illumination Included cable 1.8 m eClass: 27270914 FAQ What type of device is this and what does it do? The VHL-W18DB-PL is a Vertex photoelectric light barrier designed to provide cool, neutral illumination for detection and inspection tasks; it supports reliable object presence sensing in production and workshop environments. Is the connection cable included and how long is it? Yes, the VHL-W18DB-PL is supplied with a 1.8 m connection cable to simplify installation and reduce additional wiring requirements. What are the physical dimensions and weight? The unit measures 525 mm in length with a 70 mm diameter and weighs 2 kg, making it suitable for compact installations and retrofit mounting. Can this device be used for visual inspection alongside cameras? Yes, the cold-light characteristic of the VHL-W18DB-PL provides stable, neutral illumination that helps maintain contrast for visual checks and camera-based inspection systems. Which manufacturer produces this product? The VHL-W18DB-PL is manufactured by Vertex and supplied with Vertex quality assurance and documentation Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
70mm Light Barrier With Cold Light, 20 W, Cable 1.8m - Vertex
Take advantage of a combination of precise detection, consistent cold-light illumination and straightforward integration for reliable production processes; the device ships with a 1.8 m connection cable and is supplied by Metav Werkzeuge — order via Metav Werkzeuge or consult the team for application advice. VHL-W20DB — Vertex photoelectric light barrier with 20 W cold light and 70 mm head The VHL-W20DB is a rugged industrial light barrier designed for accurate object detection and machine safeguarding where stable, cool LED illumination is required. 20 W cold LED illumination 70 mm compact optical head Includes 1.8 m connection cable Robust housing for industrial use Consistent detection thanks to bright, cool illumination The light barrier delivers 20 W of cold light, providing a stable illumination spectrum that reduces thermal drift and improves repeatable switching thresholds. This level of radiant output supports dependable detection of contrast and edges even under variable ambient lighting, which translates into fewer false triggers and more consistent cycle times. The result is measurable process reliability and reduced downtime in automation tasks where optical precision matters. Compact form that fits tight installation spaces A 70 mm diameter optical head and a slim profile allow the device to be mounted in constrained positions around production equipment. The compact optical housing facilitates alignment and minimises interference with neighbouring components, supporting simpler machine layouts. For workshops and production lines that require space-efficient sensors, this configuration keeps the sensor footprint small while maintaining a focused detection beam for accurate presence and position sensing. Simple integration with durable cabling and straightforward mounting Delivered with a 1.8 m connection cable, the unit supports immediate electrical integration without the need for custom wiring harnesses. The included cable speeds up commissioning and reduces preparatory work on the line. The sensor’s design also supports standard mechanical fixing options, enabling quick attachment and repeatable alignment. Where interface compatibility and short installation times are priorities, this solution reduces engineering effort and accelerates time-to-production. Built for industrial environments and long-term use Constructed for workshop and factory conditions, the device’s robust housing and a net weight of 3.6 kg indicate a durable build suited to continuous operation. Materials and assembly focus on reliable performance under mechanical stress and regular handling. For buyers seeking components that contribute to predictable maintenance cycles and a stable production output, the product provides a practical balance between longevity and functionality. For application-specific advice and reliable supply from our Emmerich warehouse, contact Metav Werkzeuge for assistance with integrating the Vertex VHL-W20DB light barrier — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VHL-W20DB GTIN: 4061905090196 Manufacturer: Vertex Included accessory: Cable 1.8 m Core specifications Diameter: 70 mm Length: 861 mm Weight: 3.6 kg Power: 20 W Materials & special features Cold light LED illumination Industrial-grade housing Integrated 1.8 m connection cable FAQ What detection tasks is this light barrier suitable for? The VHL-W20DB light barrier by Vertex is designed for presence and position detection, contrast recognition and safeguarding tasks in industrial automation. Is the connection cable included and what length is it? A 1.8 m connection cable is included with the VHL-W20DB to simplify electrical integration. Can the sensor be installed in tight machine spaces? Yes, the compact 70 mm optical head of the VHL-W20DB allows mounting in confined areas while maintaining a focused detection beam. How does the cold light affect switching reliability? Cold LED illumination in the VHL-W20DB reduces thermal drift and provides stable light output, improving repeatable switching thresholds and lowering false triggers. Is this product suitable for continuous industrial operation? The VHL-W20DB features a robust housing and a construction intended for continuous workshop and factory use, supporting reliable long-term operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
70mm Light Barrier With Cold Light, 36 W, Cable 1.8m - Vertex
The combination of cold-light illumination, a 36 W output and a compact 70 mm sensor head delivers reliable detection with minimal thermal influence, keeping production running smoothly. Order the VHL-W36D-PL directly via Metav Werkzeuge or consult the specialists for configuration and supply. VHL-W36D-PL light barrier with cold light, 36 W — Vertex The VHL-W36D-PL is a compact light barrier designed for dependable presence detection and clear signalling in industrial automation and assembly applications Cold-light illumination for stable detection 36 W output for clear signalling 70 mm diameter sensor head Incl. 1.8 m connection cable Consistent detection performance for industrial processes The 36 W rated emitter in this light barrier ensures a consistent optical output that supports dependable switching and signaling in conveyor, assembly and pick-and-place tasks. As a purpose-built light barrier, it translates illumination into repeatable detection events, reducing false triggers and interruptions. The electrical rating indicates sufficient luminous intensity for typical factory distances and helps maintain throughput where optical clarity matters. Clear electrical specification allows planners to match the sensor to existing control circuits without guesswork. Compact design and ready-to-connect installation A small sensor footprint—with a 70 mm diameter head—and an included 1.8 m cable simplify integration into confined cabinets or tight machine layouts. The modest mass of 2.9 kg keeps handling and mounting straightforward, while the pre-fitted cable removes one sourcing step and speeds commissioning. Where space and cabling logistics influence machine design, the sensor’s dimensions and connection provision reduce installation time and engineering adjustments, supporting faster production line start-ups. Cold-light technology that reduces heat and drift The unit’s cold light source provides illumination with a lower thermal load compared with conventional high-temperature lamps, which helps limit thermal drift at the sensing zone. Lower heat generation protects nearby components and maintains consistent detection thresholds over extended cycles. For applications where temperature stability and minimal impact on the workpiece are important, cold-light illumination offers a practical balance between performance and component longevity. A reliable component for clear signalling and simple maintenance Engineered as a focused detection device for industrial environments, this barrier offers straightforward function without unnecessary complexity. The precise optical output and compact sensor geometry support integration into inspection stations and automation cells where clarity of signal is essential. With a robust specification and minimal accessory requirements, the unit contributes to predictable uptime and simplifies spare-part management in workshop and production settings. For technical guidance or to secure supply of the Vertex VHL-W36D-PL cold-light barrier, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com / +49 2822 7131930 — for tailored advice and reliable delivery Technical data SKU: VHL-W36D-PL GTIN: 4061905083365 Brand: Vertex Included accessory: Cable 1.8 m Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/c2/2f/97/63/63972fc2c806fb82109e3700/VHL-W15DB-detail.png Facts Power: 36 W Length: 621 mm Diameter: 70 mm Weight: 2.9 kg eClass: 27270914 Special features Cold light illumination Compact sensor head Incl. 1.8 m connection cable Category: Vertex FAQ What is the rated power of the sensor? The VHL-W36D-PL light barrier has a rated power of 36 W, suitable for clear optical signalling in typical industrial setups. Is a connection cable supplied with the unit? Yes — the device is supplied with a 1.8 m cable to simplify electrical connection and reduce installation steps. Which applications suit this light barrier? The barrier is intended for industrial automation tasks such as presence detection, part signalling and simple inspection stations in assembly and production lines. How compact is the sensor head and what is the weight? The sensor head has a 70 mm diameter and the complete unit weighs 2.9 kg, allowing integration into confined machine areas. What are the benefits of the cold-light design? Cold-light illumination reduces heat at the sensing point, supporting thermal stability and lowering the risk of heat-induced drift during continuous operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
70mm Toolholder DIN 69871 Form AD MK3 SK40 Hardened And Ground With Steep Taper - TECWERK
Take advantage of the combination of robust taper geometry, case‑hardened durability and precision grinding for consistent tool retention and low runout in everyday milling operations. Order this taper sleeve via Metav Werkzeuge for reliable supply and expert advice from our Emmerich location. Taper sleeve DIN 69871 AD MK3, SK40, 70 mm by TECWERK A Taper Sleeve DIN 69871 AD MK3 for secure clamping in SK40 spindles, designed to accept tools with Morse taper and ejector lugs for efficient tool changes Steep taper to DIN 69871 Form AD Case-hardened and precision ground Accepts tools with Morse taper and ejector lugs Compatible with SK40 spindles, length 70 mm Optimised spindle interface for repeatable accuracy The adapter is built to the DIN 69871 specification and features a steep taper profile that ensures a tight fit in SK40 tooling spindles. The workpiece-side interface is case‑hardened and precision ground, which reduces wear and keeps axial and radial runout to a minimum. This precision finish translates into predictable machining results and reduces scrap rates in batch production, supporting efficient process control on the shop floor. Secure acceptance of Morse‑taper tools with rapid ejection Designed to receive cutters and tools with a Morse taper and fitted for ejector lugs, the sleeve simplifies tool changes while maintaining positive retention under cutting forces. The 70 mm length provides adequate engagement for stability without excessive protrusion, helping to limit vibration and improve surface finish. For applications where tool seating and repeatability are critical, this adapter delivers consistent clamping behaviour that supports higher feed rates and longer tool life. Durable design that lowers downtime and simplifies inventory With a surface hardened core and finely ground contact faces, the sleeve offers long service intervals and reliable performance in daily use. The robust construction reduces the need for frequent replacements and, combined with compatibility to common SK40 systems, helps to rationalise tooling inventories across multiple machines. Backed by Metav’s European supply network and quality assurance, the component is positioned as a pragmatic choice for workshops seeking dependable tooling components and steady replenishment. For professional clamping reliability with TECWERK components, contact Metav Werkzeuge in Emmerich for personalised advice and dependable supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000833793NW Label: Kegelhülse DIN 69871AD MK3 SK40 A.-L.70mm TECWERK Manufacturer: TECWERK Facts Diameter: 40 mm Length (A): 70 mm Mount: MK3 Standard: DIN 69871 Form AD Special features Steep taper geometry to DIN 69871 Form AD Case-hardened and precision ground Accepts tools with Morse taper Fitted for ejector lugs Designed for SK40 spindle systems FAQ What spindle systems is this sleeve compatible with? The taper sleeve is compatible with SK40 spindle systems and is designed for use with MK3 mounting as specified in the product data. Can tools with a Morse taper be fitted into the sleeve? Yes, the sleeve accepts tools with a Morse taper and is prepared for ejection via standard ejector lugs to enable straightforward tool changes. How does the case‑hardening benefit daily use? Case‑hardening on the contact surfaces increases wear resistance and maintains concentricity over longer service intervals, improving component longevity and machining consistency. Is the sleeve suitable for heavy‑duty milling with higher feed rates? The combination of steep taper geometry and precision grinding provides improved retention and reduced runout, supporting more stable cutting conditions and allowing higher productive feed rates where machine rigidity permits. Which standard ensures compatibility and interchangeability? The component is produced to DIN 69871 Form AD, ensuring compatibility with tooling and spindles that conform to the same standard. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Strasse 17, 44263 Dortmund
70x101,6x95,3mm Magnetprisma für runde und rechteckige Werkstücke, 3,9kg - Vertex
Das Magnetprisma VCP-25 überzeugt durch starke Magnetkraft und kompakte Bauform, wodurch präzise Fixierung von runden und rechteckigen Werkstücken bei Messungen zuverlässig gewährleistet wird. Nutzen Sie die Kombination aus robuster Stabilität und einfacher Handhabung für präzisere Messabläufe; Bestellungen und Beratung über Metav Werkzeuge möglich. Magnetprisma VCP-25 von Vertex Das Magnetprisma VCP-25 ermöglicht sichere Fixierung runder und rechteckiger Werkstücke für präzise Messungen in Werkstatt und Messraum. Magnetprisma von Vertex für Werkstückfixierung Stabile Magnetkraft für sichere Positionierung Kompakte Abmessungen für einfachen Transport Geeignet für runde und rechteckige Werkstücke Sichere Fixierung für präzise Messungen Dank der starken Magnetkraft bietet dieses Prisma eine belastbare Halterung, die Vibrationen reduziert und Messabweichungen minimiert. Anwender profitieren von einer stabilen Fixierung bei Einsatz mit Messschiebern und ähnlichen Messmitteln. Zur Erklärung: Unter Magnetprisma wird ein Werkzeug verstanden, das durch magnetische Haftung Werkstücke so positioniert, dass sich Messinstrumente leichter und genauer anlegen lassen. Kompakte Bauform und einfache Handhabung Die kompakten Abmessungen und das moderate Gewicht ermöglichen einen flexiblen Einsatz direkt an der Werkbank oder mobil im Betrieb. Durch die handliche Größe lässt sich das Prisma schnell positionieren, ohne dass aufwändige Spannvorrichtungen erforderlich sind. Dies erleichtert wiederkehrende Messabläufe und reduziert Rüstzeiten. Einsatzbereiche und Zielgruppe Entwickelt für Werkstätten, Messräume und Produktionslinien, eignet sich das Magnetprisma insbesondere für Betriebe, die häufig zwischen Innen- und Außenmessungen wechseln. Es ist optimal für Anwender, die mit Messschiebern arbeiten und runde oder rechteckige Werkstücke prüfen müssen. Kleinere Prüfstationen profitieren von der platzsparenden Lagerung. Vorteil durch robuste Verarbeitung Obgleich detaillierte Materialangaben fehlen, sorgt das durchdachte Design für zuverlässige Gebrauchseigenschaften im täglichen Einsatz. Die robuste Konstruktion unterstützt wiederholte Fixiervorgänge und gewährleistet langfristige Funktionalität. Dadurch lässt sich die Effizienz bei standardisierten Messprozessen steigern. Empfehlung: Das Vertex Magnetprisma VCP-25 als kompakte Lösung für sichere Werkstückfixierung wählen und über Metav Werkzeuge beziehen; bei Rückfragen steht der Metav Kundenservice per eMail, Telefon oder WhatsApp zur Verfügung Produktmerkmale Artikelnummer: VCP-25 Marke: Vertex Bezeichnung: Magnetprisma ECLASS: 21160390 Gewicht: 3,9 kg Abmessungen: 70x101,6x95,3mm Fakten Gewicht: 3,9 kg Abmessungen: 70 x 101,6 x 95,3 mm Besonderheiten Geeignet für Messschieber: runde und rechteckige Werkstücke UID: VCP-25 FAQ Wie stark ist die Magnetkraft und eignet sich das Prisma für empfindliche Messungen? Das Magnetprisma VCP-25 von Vertex bietet eine ausgelegte Magnetkraft, die stabile Fixierung gewährleistet und so die Messgenauigkeit bei empfindlichen Anwendungen unterstützt. Für welche Werkstückgeometrien ist das Magnetprisma geeignet? Das Vertex Magnetprisma VCP-25 ist speziell für die Fixierung von runden und rechteckigen Werkstücken ausgelegt und damit vielseitig in Prüfumgebungen einsetzbar. Kann das Magnetprisma mit handelsüblichen Messschiebern verwendet werden? Ja, das Magnetprisma VCP-25 ist kompatibel mit Messschiebern und erleichtert das Anlegen und Festhalten von Werkstücken während der Messung. Ist das Magnetprisma mobil einsetzbar und wie beeinflusst das Gewicht die Handhabung? Mit einem Gewicht von 3,9 kg ist das Magnetprisma VCP-25 kompakt genug für den mobilen Einsatz, bietet zugleich ausreichende Masse für stabile Fixierung ohne zusätzlichen Aufwand. Welche Vorteile bietet der Kauf über Metav Werkzeuge? Beim Kauf des Vertex Magnetprisma VCP-25 über Metav Werkzeuge profitieren Anwender von geprüftem Qualitätsfilter, zuverlässiger Logistik aus Emmerich und fachkundiger Beratung für präzise Messtechnik. Hersteller: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
70x60mm Prism Pair With Clamping Bracket - Vertex
Take advantage of a stable V-block support and an integrated clamping bracket to secure cylindrical workpieces with consistent repeatability; the compact 70 x 60 mm base and 2.4 kg mass provide bench stability for inspection and light machining tasks. Order the item through Metav Werkzeuge or contact our consultants for tailored advice. Prism pair VBC-003 — V-block prisms with integrated clamping bracket by Vertex Prism pair VBC-003 is a precision V-block solution designed for safe, repeatable support and clamping of round workpieces in workshop and inspection environments Precision V-block support for round parts Integrated clamping bracket for secure hold Compact 70 x 60 mm footprint Robust construction, weight 2.4 kg Stable support for accurate measurement and machining The pair of V-block prisms delivers precision support for cylindrical components, helping to reduce run‑out during measurement and light machining operations. The substantial base area of 70 x 60 mm and overall mass of 2.4 kg increase contact stability, which minimises vibration and improves the reliability of subsequent inspection readings or secondary operations. The V‑shaped seating aligns round parts consistently and simplifies repetitive setups. Secure clamping for repeatable results Equipped with an integrated clamping bracket, this V‑block assembly ensures secure holding without complex fixturing. The clamping mechanism fixes the workpiece to the prism faces, lowering the risk of displacement during handling and thus enhancing repeatability across batches. The straightforward clamping principle allows rapid engagement and disengagement, supporting efficient changeover in production or quality control tasks. Compact design that fits the workshop bench The compact footprint supports efficient use of bench space while maintaining functional stability. The reduced occupied area makes the unit suitable for benches and measuring tables where space is at a premium, yet the design still provides dependable support for routine inspection and small‑scale turning or milling set‑ups. The modest overall size contributes to easy storage and straightforward integration into existing tooling arrays. Durable build for continuous workshop use Manufactured by Vertex, the assembly combines a practical, workshop‑oriented design with durable construction to withstand frequent handling. The balanced mass and rigour of the assembly contribute to consistent seating and longer service intervals under normal workshop conditions. Supplied through Metav Werkzeuge, the product benefits from a European quality filter that supports dependable delivery and stock reliability. Contact Metav Werkzeuge in Emmerich for detailed technical advice on the Vertex prism pair VBC-003 and arrange swift delivery to your workshop via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VBC-003 GTIN: 4061905086496 Manufacturer: Vertex Facts Foot: 70 x 60 mm Weight: 2.4 kg Eclass: 21160304 Special features With clamping bracket V-block prism design Image asset available (VBC-003 main image) FAQ What is the primary purpose of the prism pair? The prism pair VBC-003 is designed to support and locate cylindrical workpieces in inspection, measurement and light machining tasks using a V‑block seating. Can the clamping bracket hold thin, small-diameter parts securely? The integrated clamping bracket on the Vertex assembly provides a secure hold for many small to medium cylindrical parts; final suitability depends on specific part geometry. How stable is the assembly during measurement? The combination of the 70 x 60 mm foot and a mass of 2.4 kg gives the unit a stable base that reduces movement and improves measurement consistency. Is the prism pair suitable for use on a measuring table? Yes, the compact footprint and V‑block seating make the product appropriate for measuring tables and benches where reliable support of round parts is required. Which brand manufactures this prism pair and what is the SKU? The prism pair is manufactured by Vertex and is supplied under the SKU VBC-003 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
70° 2000 N Pneumatic Clamp Heavy Duty Horizontal Base Modular Piston, No Handle - Kukamet
Take advantage of the robust holding capacity and modular mounting to secure heavy workpieces reliably in production fixtures; the combination of a high holding force, compact weight and a corrosion-resistant finish ensures long-term operational stability. Order the clamping solution directly via Metav Werkzeuge or consult our specialists for application-specific integration. Pneumatic clamp 683-6 — heavy-duty pneumatic clamping solution with 11,000 N holding force (Kukamet) The Pneumatic clamp 683-6 is a heavy-duty, piston-actuated clamping device designed for industrial fixtures and production jigs, offering a compact horizontal-foot mounting and a 70° operating angle for versatile positioning. Heavy-duty 11,000 N holding force 2,000 N actuation force for secure clamping Horizontal foot, modular piston design Black oxide finish for surface protection Stable clamping for demanding fixtures The 683-6 delivers a proven 11,000 N holding force that keeps components immobile during machining and assembly operations. The distinct separation between actuation and holding values — with a 2,000 N actuation force producing a much larger sustained holding capacity — provides a clear safety margin against workpiece movement. For production engineers, this means fewer rejects and reduced rework, since the device maintains clamping integrity even under vibration or intermittent loading. The compact mass of 8 kg supports stable installation without excessive fixture bulk. Flexible mounting and precise movement control Equipped with a horizontal foot and a modular piston arrangement, the clamping device integrates into a variety of fixture geometries with straightforward mounting options. The 70° operating angle yields good access for loading and unloading while ensuring a positive toggle action during clamping. The absence of a manual handle simplifies automation and reduces interference in tightly packed tooling areas, making the clamp suitable for semi-automatic and fully automated production cells. The modular concept facilitates replacement or reconfiguration without extensive fixture redesign. Durable finish and heavy-duty construction for long service life Surface treatment in black oxide provides corrosion resistance and a low-reflective surface that is advantageous in precision environments. The heavy-duty version is engineered for repeated cycles and robust use in industrial contexts, where longevity and consistent performance are required. The design focus on durable materials and mechanical simplicity makes maintenance predictable and parts replacement manageable, contributing to lower total cost of ownership over the clamp's service life. Integrating this clamping solution supports stable process control and reliable throughput. For heavy-duty clamping requirements, contact Metav Werkzeuge to discuss how the Kukamet 683-6 can be integrated into existing fixtures; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 683-6 GTIN: 8682843521762 eClass: 21021004 ETIM: EC011973 SKU: 683-6 Facts Max actuation force: 2,000 N Max holding force: 11,000 N Weight: 8 kg Operating angle: 70° Special features Material: black oxide finish Mounting: horizontal foot, modular with piston Version: heavy-duty Special: without handle Category: spanner Story trigger: lever clamp FAQ What is the maximum holding force of this clamp? The holding capacity is 11,000 N for the Kukamet Pneumatic clamp 683-6, providing robust retention for heavy workpieces. How is the clamp mounted in a fixture? Mounting uses a horizontal foot with a modular piston connection, allowing secure installation in common jig and fixture layouts. Does the clamp include a manual handle? This heavy-duty variant is supplied without a handle; it is intended for pneumatic actuation and automated or semi-automated processes. What surface protection does the device have? The clamping unit is finished with a black oxide coating, offering corrosion resistance and a subdued surface appearance. Is the clamp suitable for automated production cells? Yes. The piston actuation and lack of a manual handle make the device well suited to integration in automated or semi-automated systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Clamp Heavy Duty Horizontal Foot With Right Handle, 1600 N Stroke Force 5600 N Holding Force - Kukamet
Take advantage of a heavy-duty pneumatic clamp that combines fast, reproducible actuation with decisive holding capacity; the robust construction and blued finish ensure long service life in demanding production environments. Order the clamp directly via Metav Werkzeuge or consult the sales team for application advice. Kukamet Pneumatic Clamp 683-4-H-R — heavy-duty, 1,600 N actuation The 683-4-H-R pneumatic clamp is a heavy-duty, right-hand clamp with a horizontal mounting foot, engineered for secure, repeatable workpiece fixation in machining and production jigs. Heavy-duty pneumatic clamp, horizontal foot Actuating force 1,600 N, rapid clamping Holding force up to 5,600 N for secure fixing Right-hand lever with blued finish Consistent clamping for machining and assembly A robust solution for fixture work, the clamp delivers reproducible clamping through pneumatic actuation, helping to maintain process stability across batch production runs. The combination of a 1,600 N actuating force and a holding force of 5,600 N provides a clear safety margin for typical machining and assembly tasks, reducing the need for repeated adjustments. The horizontal-foot design supports fast integration into existing fixture plates and t-slotted tables, enabling efficient set-up and minimised downtime. Pneumatic operation tuned for productivity Pneumatic drive offers high cycle speed and low operator effort; the actuator design converts compressed-air input into reliable lever motion for swift engagement. The clamp’s 70° arm angle and lever mechanics are optimised for short stroke travel and secure locking, which shortens cycle times and increases throughput. For workshops seeking repeatable, low-maintenance clamping, this pneumatic arrangement reduces mechanical wear compared with purely mechanical clamps while preserving high clamping consistency. Built for workshop durability and clean handling Constructed in a blued finish that resists light corrosion and keeps contact surfaces tidy, the unit balances robustness with manageable weight at 4.98 kg, allowing straightforward handling during installation. The right-hand lever configuration and the horizontal mounting foot make it suitable for fixtures where space and clearance dictate lever orientation. Surface treatment and solid construction extend service intervals and lower lifecycle intervention for routine maintenance. Integration and application advantages The clamp’s form factor and technical data make it suitable for a range of applications including machining jigs, assembly fixtures and repetitive production processes. The heavy-duty version supports demanding clamping tasks in metalworking and general fabrication. Where mechanical stability and rapid repeatability are priorities, the clamp integrates into modular fixture systems and can be combined with pneumatic control valves for centralised clamping management. Contact Metav Werkzeuge today to discuss fitment options for this Kukamet clamp and secure a reliable supply from the Emmerich quality hub Technical data Article number: 683-4-H-R GTIN: 8682843521755 Manufacturer: Kukamet Core specifications Actuating force: 1,600 N Holding force: 5,600 N Weight: 4.98 kg Arm angle: 70° Design & features Material/finish: blued finish (blackened) Mounting: horizontal foot with handle Handle side: right-hand Version: heavy-duty Category: clamp / spanner FAQ What is the primary application for this pneumatic clamp? The 683-4-H-R is intended for fixture and jig clamping in machining and repetitive assembly where fast, reproducible locking and high holding force are required. Can the clamp be mounted on t-slotted tables or fixture plates? Yes; the horizontal foot mounting is suitable for integration into t-slot tables and modular fixture plates. Is the lever orientation fixed to the right? The supplied version features a right-hand lever; selection of handle side is a defining characteristic of this SKU. What maintenance is required for long service life? Routine inspection of pneumatic connections and periodic lubrication of pivot points maintain performance; the blued finish reduces surface corrosion and cleaning frequency. Does the clamping unit support heavy machining loads? With an actuating force of 1,600 N and holding force up to 5,600 N, the unit is designed to withstand substantial machining and assembly loads when correctly installed. Who supplies this clamp and where is stock held? This clamp is supplied by Kukamet and distributed via Metav Werkzeuge’s Emmerich hub for European customers Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Clamp Heavy Duty Without Handle, Horizontal Base Modular Piston, 1,600 N Thrust - Kukamet
Take advantage of a combination of robust clamping force, compact installation options and a corrosion-resistant finish for reliable cycle times in production environments. Order the Kukamet Pneumatikspanner directly via Metav Werkzeuge or ask Metav's consultants for application advice. Kukamet Pneumatikspanner – heavy-duty pneumatic clamp with horizontal foot and modular piston The Pneumatikspanner is a heavy-duty pneumatic clamp designed for industrial workholding and automated fixturing in production and assembly lines. Heavy-duty pneumatic clamping 1,600 N Holding force up to 5,600 N Horizontal foot, modular piston mount Black blued finish for corrosion resistance Consistent clamping performance that reduces rework The clamp delivers a defined actuation force of 1,600 N and a holding force of 5,600 N, providing reproducible workpiece fixation that helps to reduce rejects and rework. Repeatability is achieved through the pneumatic piston design and the robust construction, which together ensure consistent stroke behaviour under cyclical loads. This level of force control is particularly beneficial for machining, welding and assembly operations where fixture stability directly affects part quality. The compact mass of the unit contributes to minimal inertial effects during rapid cycling. Compact mounting and low-maintenance operation for automated lines Designed with a horizontal foot and a modular piston mounting, the device is suitable for tight fixture layouts and straightforward integration into automated tooling. The black blued finish improves surface durability and provides basic corrosion protection in workshop environments. The spanner is supplied without a handle, a deliberate choice that favours machine-vision access and prevents accidental interference in automated cells. Service requirements are limited to routine pneumatic and seal checks; the simple mechanical layout facilitates quick replacement of wear components where needed. Improved throughput and safe handling for industrial workflows By shortening clamp cycle times and providing secure locking, the unit contributes directly to higher throughput and reduced operator handling time. Secure fixation lowers the risk of workpiece movement during machining, improving tool life and dimensional accuracy. The Pneumatikspanner's heavy-duty version and robust finish make it appropriate for continuous use in demanding production settings; documentation and dimensional data support rapid integration into existing fixtures. For further technical matching to specific machines or fixtures, Metav's technical consultants can supply supplementary data and engineering guidance. Contact Metav Werkzeuge for tailored integration advice and reliable supply of the Kukamet Pneumatikspanner (SKU 683-4) from Emmerich. Technical data Article number: 683-4 GTIN: 8682843521731 Manufacturer: Kukamet Facts Max actuation force: 1,600 N Max holding force: 5,600 N Weight: 4.9 kg Angle: 70° eCl@ss: 21021004 ETIM: EC011973 Special features Mounting: horizontal foot, modular with piston Finish: black blued Design: heavy-duty version Feature: supplied without handle FAQ What is the maximum clamping force of this pneumatic clamp? The Kukamet Pneumatikspanner offers an actuation force of 1,600 N and a holding force up to 5,600 N (SKU 683-4). Can the clamp be integrated into automated fixtures? Yes, the horizontal foot and modular piston design permit compact integration into automated tooling and production cells. What surface treatment does the spanner have? The unit is supplied with a black blued finish, providing improved surface durability and basic corrosion resistance. Is a handle included with the clamp? No, the Kukamet Pneumatikspanner is supplied without a handle to facilitate automation and avoid accidental interference. What information is available for CAD integration? Dimensional and technical data are provided for the Kukamet Pneumatikspanner (683-4); Metav can supply further drawings on request. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Clamp Heavy-Duty Horizontal Base Left Handle, 1,600 N Push, 5,600 N Hold - Kukamet
Take advantage of a combination of high holding force, robust construction and user‑friendly mounting for reliable fixture performance; the heavy‑duty pneumatic clamp delivers repeatable clamping and simple installation. Order the Kukamet unit directly via Metav Werkzeuge or consult our advisers for fixture integration and layout suggestions. 683-4-H-L Pneumatic Clamp (Heavy‑Duty) by Kukamet — 70° Angle, Left Handle The 683-4-H-L pneumatic clamp is a heavy‑duty clamping solution for industrial fixtures, designed to provide secure, repeatable holding in assembly and machining applications. Heavy‑duty pneumatic actuation Holding force 5,600 N Horizontal base with left handle Black oxide finish for corrosion protection Robust holding for demanding production tasks Built for industrial fixtures, this heavy‑duty pneumatic clamp gives a dependable holding force of 5,600 N, ensuring workpieces remain secure during machining and assembly operations. The high clamping capacity reduces rework and downtime by maintaining part position under load; this translates into fewer stoppages and a smoother production flow. The clamp’s mass and finish contribute to stable performance across repetitive cycles. Precise actuation and repeatability With an actuation force of 1,600 N and a 70° angle lever path, the unit provides controlled, repeatable clamping strokes that simplify process design. Pneumatic actuation enables rapid cycle times and consistent pressure, which supports accurate positioning in jigs and fixtures. For applications where consistent clamping pressure matters, the clamp’s mechanics reduce variability compared with manual lever methods. Installation flexibility and ergonomic access A horizontal base with an integrated handle and a left‑side handle orientation allow straightforward mounting in many fixture layouts and accessible operation within confined workspaces. The left handle helps when space or operator approach dictates clamp orientation. At a practical weight of 4.98 kg, the device combines stability with manageable handling during assembly into modular tooling. Durable finish and maintenance advantages Finished in a black oxide (blackened) coating, the clamp resists surface corrosion and fits hygienic shop environments without excessive maintenance. The heavy‑duty construction minimises wear on pivot points and seals, reducing intervention frequency. Where uptime and low life‑cycle costs are priorities, this clamp offers a balance of robustness and straightforward upkeep. For robust fixture requirements and integration advice on the Kukamet heavy‑duty pneumatic clamp, contact Metav Werkzeuge for tailored recommendations and ordering assistance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 683-4-H-L GTIN: 8682843521748 Manufacturer: Kukamet Facts Weight: 4.98 kg Holding force (max): 5,600 N Actuation force (max): 1,600 N Clamping angle: 70° eClass: 21021004 ETIM: EC011973 Special features Heavy‑duty version Horizontal base with handle Handle left Material: blackened (black oxide) finish Category: Clamping devices (Spanner) FAQ What materials can be clamped with this device? The Kukamet 683-4-H-L pneumatic clamp is suitable for general industrial workholding applications; its design supports secure clamping of parts commonly used in assembly and machining fixtures. How much holding force does the clamp provide? The unit provides a maximum holding force of 5,600 N, delivering robust retention for demanding operations and ensuring minimal part movement under load. What are the mounting options for this clamp? The clamp features a horizontal base with an integrated handle for direct fixture mounting; the left‑hand handle orientation offers installation flexibility for many jig arrangements. Is the surface finish suitable for shop use? Yes, the blackened (black oxide) finish provides basic corrosion resistance and a low‑maintenance surface suitable for workshop environments. Which SKU should be referenced when ordering spares or replacements? Reference SKU 683-4-H-L and the Kukamet designation when enquiring about spare parts or replacements to ensure correct component matching. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70° Pneumatic Heavy-Duty Clamp, 2 000 N Actuation, 11 000 N Holding Force, Right Handle - Kukamet
Take advantage of the combination of high holding force, robust pneumatic actuation and a durable blackened finish for reliable fixture clamping and uninterrupted production. Order the clamp directly via Metav Werkzeuge or contact our consultants for application-specific advice. Pneumatic clamp »683-6-H-R« – heavy-duty, right-hand handle A robust pneumatic clamp designed for industrial fixtures, offering high holding capacity and compact horizontal-base installation Pneumatic clamp »683-6-H-R« heavy-duty Holds up to 11,000 N clamping force Actuation force max 2,000 N Right-hand handle, horizontal base, 70° angle Secure holding that reduces rework and increases throughput The Kukamet pneumatic clamp delivers a holding force of 11,000 N, ensuring stable fixation of workpieces during machining and assembly. High clamping capacity reduces vibration and movement, which in turn lowers the risk of scrapped parts and rework. The heavy-duty construction contributes to consistent cycle performance in serial production, making the clamp suitable for demanding workshop and light industrial environments where process reliability is essential. Fast, repeatable actuation and straightforward fixture integration Equipped with a pneumatic actuator that exerts a maximum actuation force of 2,000 N, the unit allows for rapid and repeatable clamping cycles, supporting efficient throughput on automated or semi-automated lines. The horizontal base with an integrated handle and a 70° swing angle permits compact mounting and predictable motion paths, while the right-hand handle variant fits many standard fixture layouts. At 8.13 kg, the mass of the clamp helps maintain stability once installed, reducing the need for additional counterbracing. Durable surface and clear technical classification for procurement The component is finished in a blackened (brunished) surface, offering increased resistance to wear and a reduced visual impact in production areas. Classified under ETIM EC011973 and eCl@ss 21021004, the clamp is straightforward to specify in procurement systems and compatible with standard fixture documentation. The robust design minimises maintenance intervals and supports long service life, helping to lower total cost of ownership through extended uptime. Contact Metav Werkzeuge for tailored clamping solutions or technical advice on the Kukamet pneumatic clamp »683-6-H-R« with 11,000 N holding force — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 683-6-H-R GTIN: 8682843521786 Brand: Kukamet Facts Weight: 8.13 kg Holding force (max): 11,000 N Actuation force (max): 2,000 N Angle: 70° ETIM: EC011973 Eclass: 21021004 Special features Heavy-duty version Horizontal base with handle Right-hand handle Finish: blackened (brunished) Category: Spanner FAQ What clamping capacity does the clamp offer? The Kukamet pneumatic clamp »683-6-H-R« provides a maximum holding force of 11,000 N for secure fixation during machining. How much actuation force is required for operation? Pneumatic actuation requires a maximum force of 2,000 N, as specified for the model 683-6-H-R. Is the clamp suitable for automated fixtures? Yes, the combination of repeatable pneumatic actuation and a compact horizontal base makes the clamp suitable for automated and semi-automated fixtures. What surface protection does the unit have? The clamp is supplied with a blackened (brunished) finish that improves wear resistance and reduces corrosion risk in standard workshop environments. Which SKU should be referenced when ordering spare parts or accessories? Reference SKU 683-6-H-R together with the Kukamet brand to ensure compatibility and correct spare parts allocation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
71mm 12mm Reducer Bushing Hardened And Ground For Drill Rod Holder Form E 2, 40mm Bore - TECWERK
Take advantage of a hardened and ground reduction sleeve that delivers stable clamping and minimal runout for demanding workshop use; the compact Ø 12 mm bore and Ø 40 mm outer profile with a 71 mm clamping length make retrofitting straightforward. Order the reduction sleeve directly via Metav Werkzeuge or consult our specialists for compatibility advice. Reduction sleeve Form 1 – bore Ø 12 mm, outer Ø 40 mm (TECWERK) Reduction sleeve Form 1 for adapting smaller drill bars to larger holders in workshop and industrial clamping systems Hardened and ground finish Bore Ø 12 mm for precise fit Outer Ø 40 mm nominal diameter Clamping length 71 mm for stable support Compatible with Form E2 drill shank holders Reliable clamping through hardened and ground surfaces The primary benefit of a hardened and ground reduction sleeve is consistent precision during machining operations. Hardening increases surface wear resistance while grinding produces a true, low‑tolerance bore; together they reduce radial runout and prevent premature tool wear. This results in fewer tool changes and improved component quality. The finish is particularly relevant where concentricity matters, such as reaming, drilling and light milling tasks, delivering measurable gains in process repeatability and tool life. Clear dimensions for seamless compatibility and retrofitting With a Ø 12 mm internal bore, a Ø 40 mm external diameter and a 71 mm clamping length, the sleeve offers defined mechanical interfaces for secure clamping. The geometry is designed for use with standard drill shank holders of Form E2, enabling straightforward adaptation of smaller tooling into larger holders without bespoke adapters. For procurement and logistics, the clear dimensional specification simplifies inventory choices and reduces the number of specialised holders required on the shop floor. Practical use and workshop advantages The reduction sleeve is manufactured for robust everyday use in both light industrial and professional workshop environments, providing stable tool support along the clamped length. Installation is mechanical and does not require special assembly aids; once seated in the holder, the sleeve secures the tool shank to maintain concentricity under load. The combination of durability and precise fit lowers scrap rates and contributes to shorter setup times, supporting a smoother production flow and better overall equipment effectiveness. Choose the TECWERK reduction sleeve for dependable, repeatable clamping and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for ordering guidance and technical matching. Technical data Article number: 2000834224NW Product type: Reduction sleeve Form 1 Manufacturer: TECWERK Label: Reduzierbuchse Form 1 Bohrungs-D.12mm AD 40mm Einspann-L.71mm TECWERK Packaging unit: 1 UID: 2000834224NW Facts Bore diameter: 12 mm Outer diameter: 40 mm Clamping length: 71 mm Special features Hardened and ground For drill shank holders Form E2 Designed for workshop and industrial clamping FAQ What internal bore does the reduction sleeve have? The reduction sleeve has an internal bore of 12 mm, suitable for standard 12 mm shank tooling in the described adaptation. Can this sleeve be used with Form E2 holders? Yes, the reduction sleeve is specified for use with Form E2 drill shank holders and provides a secure fit for that holder form. Is the sleeve suitable for precision drilling applications? The sleeve’s hardened and ground finish is intended to maintain concentricity and minimise runout, making it appropriate for precision drilling and similar operations. What clamping length is provided and why does it matter? The sleeve offers a clamping length of 71 mm, which increases contact area for improved stability and load distribution during machining. Which SKU identifies this product for ordering? Order using SKU 2000834224NW; the product is listed as the TECWERK reduction sleeve Form 1 with the dimensions stated above. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
71mm 20mm Bore Reducer Sleeve For E2 Drill Rod Holder, Hardened And Ground - TECWERK
Take advantage of a hardened, precision-ground sleeve that ensures consistent seating and simple integration into existing Form E 2 toolholders — the combination of durability, exact fit and compact clamping length supports uninterrupted production. Order directly via Metav Werkzeuge or speak with their consultants for specification guidance. Reduction bushing Form 2 – bore Ø20 mm · OD Ø40 mm (TECWERK) The Reduction bushing Form 2 provides a hardened, ground interface for adapting 20 mm drill rods to 40 mm holders, ideal for accurate, repeatable clamping in workshop environments Hardened and ground for long service life Fits drill rod holders Form E 2 precisely Bore Ø20 mm, outer Ø40 mm Clamping length 71 mm for secure seating Engineered for secure, repeatable clamping The reduction bushing is designed to deliver tight concentricity and dependable repeatability when adapting smaller shank tools to larger holders. Made hardened and ground, the sleeve minimises radial play and reduces runout at the tool tip, which leads to improved hole quality and extended tool life. For operations where tool alignment and consistency matter, this component supports repeatable set-ups and reduces the need for frequent re-adjustment. Compact dimensions that simplify setup and storage With a bore Ø20 mm and an outer Ø40 mm, combined with a clamping length of 71 mm, the sleeve keeps assemblies compact while maintaining sufficient contact length for secure retention. The modest overall length and tidy external diameter make it straightforward to handle in constrained tool magazines and compact spindles, supporting efficient changeover and storage without added bulk. Compatibility with Form E 2 drill rod systems Specified for use with drill rod holders Form E 2, the sleeve is a practical choice for workshops standardised on that holder family. Compatibility avoids custom adaptation and streamlines tool management across machines. The simple, function-focused design helps maintain consistent seating and torque transmission between holder and tool shank, contributing to stable machining conditions and predictable cycle outcomes. Built for workshop endurance and predictable performance Surface hardening and precision grinding mean the sleeve resists premature wear under continuous clamping cycles and maintains dimensional integrity over time. The combination of durable finish and exact fit supports lower maintenance demands and steadier production quality. Where reliability and uptime are priorities, this solution reduces downtime associated with ill-fitting adapters and enhances confidence in everyday machining tasks. Contact Metav Werkzeuge for specification assistance or to discuss suitability for existing toolholders — call +49 2822 7131930 or email info@metav-werkzeuge.com — Metav’s consultants will help confirm compatibility and delivery options Technical Data Article number: 2000834226NW SKU: 2000834226NW Product: Reduction bushing Form 2 Manufacturer: TECWERK Form: 2 Facts Bore diameter: 20 mm Outer diameter: 40 mm Clamping length: 71 mm Packaging unit: 1 Special features Hardened and ground For drill rod holders Form E 2 Product type: Reduction bushing Label: Reduzierbuchse Form 2 Bohrungs-D.20mm AD 40mm Einspann-L.71mm TECWERK FAQ What material is the reduction bushing made from? The technical listing specifies the sleeve is hardened and ground; for material composition please refer to the manufacturer TECWERK documentation or contact Metav Werkzeuge for detailed specification. Will this sleeve fit a Form E 2 holder on existing equipment? Yes, the sleeve is specified for use with drill rod holders Form E 2 and provides a bore Ø20 mm to OD Ø40 mm adaptation designed for that holder family. How does the clamping length affect performance? A clamping length of 71 mm offers sufficient contact area for secure seating and improved torque transmission, reducing the risk of slippage and improving concentricity during machining. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
71mm 6mm Reducing Sleeve Hardened And Ground, For Boring Bar Holder Form E2 - TECWERK
Take advantage of the combination of hardened and ground design, precise dimensions and a stable clamping length to ensure reliable, repeatable set‑ups. The design reduces spindle run‑out and secures small‑diameter tooling; order the reducing bushing directly via Metav Werkzeuge or consult our specialists for application advice. Reducing bushing Form 1 (6 mm bore, 40 mm OD) – TECWERK A Reducing bushing Form 1 for drill shank holders, hardened and ground to deliver secure clamping and repeatable tool concentricity in production and workshop environments Hardened and precision ground 6 mm bore for small‑diameter tooling 40 mm outer diameter for Form 1 holders 71 mm clamping length for stable grip Precision fit for repeatable set‑ups The sleeve delivers a precise interface between small‑diameter tooling and larger holders. With a 6 mm bore and 40 mm outer diameter, the component provides concentricity that minimises run‑out and enhances machining accuracy. The geometry reduces repositioning time during tool changes and supports predictable tolerances in serial production. This makes the device a practical choice for workshops requiring consistent results from every set‑up. Durable treatment for long service life Manufactured hardened and ground, the bushing resists wear and maintains internal tolerances over extended use. The surface finish lowers friction during insertion and removal, which reduces fretting and preserves the bore dimension. Such treatment translates into fewer replacements and less downtime, supporting a more economical tool management strategy while maintaining machining quality. Stability in the clamping zone improves productivity A 71 mm clamping length provides a secure contact area that helps to absorb cutting forces and to prevent axial movement under load. The extended engagement length complements the outer diameter for a robust connection in the holder. For operations that demand stable tool presentation—drilling, reaming or light finishing—the component reduces vibration and contributes to improved surface quality and tool life. Easy integration and practical handling Designed for use with the Form E2 drill shank holder family, the adaptor simplifies integration into existing clamping systems without complex rework. The straightforward geometry and known dimensions support quick verification during tool pre‑set and spare‑part management. For application questions or dimension checks, technical advice is available to ensure the sleeve matches the intended holder and tool combination. For tailored application support or to secure this TECWERK reducing bushing, contact Metav Werkzeuge for fast, reliable handling and expert advice from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 2000834221NW Product type: Reducing bushing (Form 1) Manufacturer: TECWERK Packaging unit: 1 Dimensions Bore diameter: 6 mm Outer diameter: 40 mm Clamping length: 71 mm Special features Hardened and ground For drill shank holder Form E2 Designed for precise concentricity and stable clamping FAQ Is this bushing compatible with Form E2 holders? Yes. The TECWERK reducing bushing Form 1 is designed for use with drill shank holders of the Form E2 family and matches the specified outer diameter for a secure fit. What do "hardened and ground" mean for service life? Hardened and ground indicates the sleeve has undergone heat treatment and precision grinding, which increases wear resistance and maintains bore accuracy during repetitive insertion and machining cycles. How is the bushing installed in the holder? The sleeve is pressed or slid into the host holder until fully seated; axial positioning is determined by the holder's stop. Ensure cleanliness of contact surfaces and correct seating to achieve intended concentricity. Can the sleeve be used with other holder types? Compatibility with other holders depends on matching the outer diameter and clamping interface; the component will work with alternative systems only when the OD and locating features correspond to the host holder. What is the SKU for ordering and spare‑part tracking? The SKU for this TECWERK reducing bushing Form 1 is 2000834221NW Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
71mm Quick-Change Tool Holder Head Gr. B With Eccentric Clamp, 32mm Bore, 0.01mm Repeatability - TECWERK
Take advantage of the combination of fast, repeatable tool changes and hardened, precision-ground contact surfaces for consistent turning results; the eccentric clamping and 40 angular positions ensure flexible machining while the 71 mm overhang accommodates extended setups — order directly via Metav Werkzeuge or consult our specialists for compatibility advice. Quick-change toolholder head Gr. B TECWERK — eccentric clamping, 40 index positions Quick-change toolholder head Gr. B TECWERK is designed for rapid tool changes in lathe and turning applications, offering high repeatability and robust, hardened contact surfaces Eccentric clamping for quick tool changes Repeatable positioning to 0.01 mm Hardened, ground gearing and seating 40 index positions in 9° steps 32 mm central bore and 71 mm overhang Precision and process reliability for turning operations The quick-change toolholder head delivers a measurable improvement in set-up speed and process stability thanks to its eccentric clamping system and confirmed 0.01 mm repeatability. The eccentric clamp secures cutting tools quickly while maintaining the repeatable position required for serial production, which reduces downtime between operations and minimises rework. For workshops and job shops that value consistent results, the unit’s measured indexing and firm seating reduce setup variability and support predictable cycle times. Flexible positioning for multi-angle tooling With 40 index positions at approximately 9° increments, this holder head enables a wide range of tool orientations without the need for separate fixtures, allowing machining strategies to be adapted on the fly. The ability to set different tool angles within a single holder supports complex facing, profiling and finishing tasks while keeping the toolcentre height adjustment straightforward via the integrated set screw. This flexibility translates into fewer tool changes on the machine and a leaner tool inventory. Robust construction for demanding shop use Critical contact areas are hardened and ground, providing a durable seating surface that resists wear and preserves alignment over time. The central 32 mm bore and the structural design accommodate stable mounting, while the maximum 71 mm overhang suits operations requiring extended reach. These characteristics combine to deliver a component that withstands the mechanical stresses of heavy turning and repeated index cycles, prolonging service life and reducing maintenance frequency. Practical handling and compatibility in production The head’s design focuses on fast handling: tool swaps are completed with the eccentric locking action, and the tip height of the turning tool is adjusted securely using the set screw on the tool post. Because the clamping and locating faces are precision-ground, repeatability is largely independent of operator skill, which supports consistent quality across different shifts and operators. For integration into existing setups, the component’s dimensions and index resolution make it suitable for a wide range of conventional and CNC lathes, provided the spindle and turret interfaces match the 32 mm centre bore. Contact Metav Werkzeuge for tailored advice on fitment and delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specification details and stock availability Technical data Article number: 2000832152NW Manufacturer: TECWERK Type/Grade: Gr. B Product type: Quick-change toolholder head Core data Overhang (max.): 71 mm Central bore diameter: 32 mm Repeatability: 0.01 mm Index positions: 40 Index step: 9° Special features Eccentric clamping for rapid tool changes Tip height adjustable via set screw Hardened and ground gearing and seating Designed for consistent repetitive positioning FAQ What level of repeatability can be expected from this holder head? The Quick-change toolholder head Gr. B TECWERK provides repeatable positioning to 0.01 mm, ensuring reliable tool location across repeated changes. How many angular settings are available and what is the step size? The unit offers 40 index positions, each at approximately 9°, enabling a broad range of tool orientations without additional fixtures. What bore size is required for mounting this head? The component uses a 32 mm central bore, which must match the turret or adapter interface for correct mounting. Is the tip height adjustable and how is it set? Tip height is adjusted on the turning tool using the built-in set screw on the toolholder, allowing precise height correction after indexing. Are the contact surfaces durable for serial production? Yes. The gearing and planing contact surfaces are hardened and ground, providing wear resistance and stable seating for repetitive production runs. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
71mm Reduction Bushing Form 1, Bore Ø10mm, OD 40mm Hardened and Ground - TECWERK
Take advantage of a hardened, ground adapter that secures a 10 mm drill shank in a Ø40 mm holder with a 71 mm clamping length for reliable tool retention and consistent runout; order via Metav Werkzeuge or request technical advice from the Metav team for integration into existing setups Reducing bushing Form 1 – Ø10 mm to Ø40 mm, hardened and ground (TECWERK) The reducing bushing Form 1 is a hardened, ground adapter designed to seat a 10 mm drill shank in a Ø40 mm holder, primarily for use with Form E 2 drill bar holders. Hardened and ground finish for precision fit Suitable for Form E 2 drill bar holders Inner bore Ø10 mm, outer Ø40 mm Clamping length 71 mm Precision fit for consistent tool alignment The reducing bushing Form 1 provides a tight, repeatable interface between a small-diameter drill shank and a larger holder, reducing radial runout and improving hole quality. Manufactured for clamping systems that accept Form E 2 adapters, the component’s hardened and ground surfaces ensure the seating face and bore maintain concentricity under load. For workshops where repeatability and minimal rework are priorities, this adapter delivers a measurable improvement in drilling accuracy and machine uptime. Robust preparation for demanding machining Thanks to the hardened and ground finish, the sleeve resists wear and preserves the bore geometry under repeated tool changes. The adapter’s geometry — inner Ø10 mm, outer Ø40 mm and clamping length 71 mm — gives sufficient overlap for stable retention while minimising flex. This combination of surface treatment and overlap translates into longer service intervals for both the adapter and the mounted cutting tool, reducing the need for frequent replacements and supporting a cost-effective workflow. Seamless integration into workshop tooling Designed for compatibility with drill bar holders classified as Form E 2, the bushing simplifies retrofitting smaller shanks into existing holder inventories. The adapter acts as a reliable interface in production or maintenance environments where flexibility is required without compromising on runout or clamping security. For assembly operations or retrofit projects, the sleeve allows consolidation of holders and shanks, streamlining tooling stock and simplifying changeovers. How the design benefits operations The straightforward geometry — inner Ø10 mm, outer Ø40 mm, clamping length 71 mm — makes inspection and replacement easy within routine maintenance schedules. The hardened surfaces reduce deformation during repeated clamping cycles, which preserves concentricity and extends the service life of both holder and small-diameter drills. Where precise hole position and surface finish matter, the adapter supports process reliability and reduces scrap rates. Contact Metav Werkzeuge for tailored advice on integrating TECWERK reducing bushings into production or to request supplementary technical details; Metav Werkzeuge can be reached by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000834223NW Manufacturer: TECWERK Type: Reducing bushing Form: 1 Core dimensions Inner bore d1: 10 mm Outer diameter d: 40 mm Clamping length L: 71 mm Special features Hardened and ground finish For drill bar holders Form E 2 Single-piece adapter Packaging unit: 1 FAQ What is the primary application of this reducing bushing? The reducing bushing Form 1 is intended to adapt a Ø10 mm drill shank for mounting in a Ø40 mm holder, commonly used with Form E 2 drill bar holders to improve fit and reduce runout. Is the bushing suitable for heavy-duty drilling cycles? The hardened and ground finish of the TECWERK reducing bushing provides enhanced wear resistance and dimensional stability, making it suitable for repetitive use in demanding workshop environments. How does the clamping length affect tool retention? The clamping length 71 mm offers sufficient engagement to secure small-diameter shanks reliably, improving retention and concentricity compared with shallow adapters. Can this adapter be used in automated tool change systems? As a precision adapter with a hardened, ground bore, the sleeve is compatible with mechanical clamping systems that accept Form E 2 holders; integration depends on the specific machine interface and clamping mechanism. What identification is used for ordering this part? Order reference: SKU 2000834223NW; referenced as a TECWERK reducing bushing Form 1 with inner Ø10 mm and outer Ø40 mm Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
71mm Reduction Sleeve 32mm Bore 40mm Outer Diameter Hardened And Ground - TECWERK
Achieve secure, concentric clamping and longer tool life thanks to the hardened and ground finish together with the precise 32 mm bore and 71 mm clamping length; order the part directly via Metav Werkzeuge or ask our consultants for selection support. Reduction bushing Form 2 – TECWERK, 32 mm bore, 71 mm clamping length A Reduction bushing Form 2 designed for accurate reduction of holder diameters and reliable seating in drill rod holders, suitable for retrofit work and small-series production. Hardened and ground for durability 32 mm inner bore for precise seating 40 mm outer diameter for standard holders 71 mm clamping length for stable fixation Consistent concentricity for reduced runout and improved part quality The hardened and ground finish provides a precision mating surface that reduces radial play and vibration during machining. By combining a true 32 mm inner bore with a controlled outer form, the sleeve promotes consistent centring of the tool shank and lowers runout. This results in fewer rejects and more predictable machining results, supporting higher first-pass yield and reduced rework. Straightforward compatibility with Form E2 holders for easy retrofitting Designed to fit drill rod holders of Form E2, the bushing converts a standard 40 mm holder to accept a 32 mm shank without complex adapters. The clearly defined 40 mm outer diameter and standardised geometry allow rapid installation into existing clamping systems, which minimises fixture changes and keeps set-up times short. Retrofit tasks and small-batch jobs benefit from the simple, deterministic interface. Robust clamping length that improves stability and tool life With a 71 mm effective clamping length, the sleeve increases contact area and axial support for the tool shank, reducing bending stress under load. The extended engagement improves heat dissipation and lowers the risk of micro-movements that accelerate wear. For workshops seeking steadier cutting performance and less frequent replacement cycles, this combination of finish and length delivers tangible productivity gains. For secure, high-precision clamping and straightforward integration into existing setups, contact Metav Werkzeuge to request the TECWERK reduction bushing Form 2 (SKU 2000834228NW) — our Emmerich team will advise on availability and delivery from stock. Technical Data Article number: 2000834228NW Manufacturer: TECWERK Product type: Reduction bushing Form: 2 Facts Inner bore (d1): 32 mm Outer diameter (d): 40 mm Clamping/engagement length (L): 71 mm Special features Hardened and ground For drill rod holder Form E2 Packaging unit: 1 FAQ What are the exact dimensions of the sleeve? The TECWERK reduction bushing Form 2 (SKU 2000834228NW) has an inner bore of 32 mm, an outer diameter of 40 mm and a clamping length of 71 mm. Which holder type is this bushing intended for? This sleeve is made for use with drill rod holders specified as Form E2, providing a standardised interface for retrofit and replacement tasks. Is the surface treatment suitable for workshop use under load? Yes — the component is hardened and ground, offering wear resistance and a precise seating surface for stable clamping during machining. How does the clamping length affect machining stability? The 71 mm engagement increases axial support and reduces bending of the tool shank, which improves stability, lowers runout and contributes to longer tool life with fewer interruptions. Is the base material specified for the bushing? No material designation is provided in the available data; the specification states only the hardened and ground treatment for the sleeve Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
71° 2500 N Horizontal Clamp With 2800 N Holding Force, Zinc Plated - Kukamet
Take advantage of secure, repeatable clamping with robust zinc-plated construction and a max clamping force of 2,500 N for reliable fixture holding; order the Horizontal clamp 122 directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 122 — Kukamet horizontal-foot lever clamp, zinc-plated, 2,500 N The Horizontal clamp 122 is a compact lever clamp designed for stable workholding in jigs and fixtures, featuring a horizontal foot mounting and corrosion-resistant zinc plating for workshop use. Horizontal foot mounting Zinc-plated corrosion protection Max clamping force 2,500 N Compact weight 0.49 kg for easy positioning Consistent clamping performance for production workflows The lever design delivers a repeatable clamping force that supports efficient fixture set-up and reduces rework. With a rated clamping force of 2,500 N and a holding force of 2,800 N, the device secures components reliably during machining, assembly or inspection operations. The specified forces translate into predictable contact pressure; this helps maintain part position under lateral loads and contributes to shorter cycle times in batch production. The compact mass and low profile reduce added inertia on moving fixtures while maintaining the required holding capability. Durable materials and stable mounting for workshop environments Constructed from zinc-plated steel, the clamp resists common forms of surface corrosion found in everyday workshop conditions, extending service life and lowering maintenance cycles. The horizontal foot mounting provides a stable, low-profile attachment to fixture plates and tooling boards; this geometry keeps the clamping vector parallel to the workpiece datum and simplifies integration into existing jigs. The lever mechanism is optimised for rapid engagement and release, enabling quick changeovers without compromising clamp rigidity. Practical handling and integration for fixture design The clamp’s compact dimensions and modest weight make it straightforward to position in confined setups or on modular tooling systems. An operating angle of 71° provides favourable leverage for manual actuation while keeping the handle clearance minimal, useful where adjacent clamps or gauges are present. As a simple, mechanical workholding element, the unit minimises the need for auxiliary power or controls, supporting lean production principles and reducing points of failure. The familiar lever format ensures easy training and immediate adoption on the shop floor. Contact Metav Werkzeuge for supply and specification assistance on the Kukamet Horizontal clamp 122 — our Emmerich-based team will advise on integration and availability Technical data Article number: 122-3 GTIN: 8680731501094 Manufacturer: Kukamet Facts Max clamping force: 2,500 N Max holding force: 2,800 N Weight: 0.49 kg Operating angle: 71° Special features Material: zinc-plated steel Mounting: horizontal foot Design: lever/hand-actuated clamp FAQ What maximum clamping force does this clamp provide? The clamp provides a maximum clamping force of 2,500 N, giving the Horizontal clamp 122 sufficient holding capacity for many fixture and assembly tasks. Is the clamp suitable for workshop environments prone to humidity? Yes, the zinc-plated finish on the Horizontal clamp 122 offers basic corrosion protection appropriate for general workshop conditions, extending service life compared with untreated steel. How is the clamp mounted to a fixture plate? The clamp uses a horizontal foot mounting that fastens to fixture plates or tooling boards; this arrangement keeps the clamp low-profile and aligned with the workpiece datum. What advantage does the 71° operating angle provide? A 71° lever angle balances handle clearance and mechanical advantage, allowing straightforward manual actuation while maintaining a compact footprint in tight fixture layouts. Who supplies this clamp and where can further advice be obtained? The clamp is supplied by Kukamet and distributed via Metav Werkzeuge; Metav can provide application guidance and delivery information for the Horizontal clamp 122 (SKU 122-3). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com