Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
7mm ER16 Collet With 5.5mm Internal Square For Thread Cutting, 15µm Runout - TECWERK
High concentricity with a 15 µm runout combined with a 7 mm clamping diameter and a 5.5 mm internal square delivers precise tapping and thread-cutting results in compact tool setups. Order the ER16-GB collet directly via Metav Werkzeuge or request advice from our consultants to confirm suitability and stock. ER16-GB collet — compact 7 mm clamping diameter, 5.5 mm internal square (TECWERK) ER16-GB collet for precision tapping and thread cutting in ER-type collet chucks, designed for compact installations where runout and repeatability are critical. High runout accuracy 15 µm Clamping diameter 7 mm Internal square 5.5 mm for tapping Short length 27.5 mm Deliver consistent thread quality with low runout The 15 µm runout accuracy of this ER16-GB collet reduces wobble during rotation, which directly improves thread concentricity and tool life. In practical terms, the reduced radial deviation translates to fewer rejects and more predictable tapping forces; this is particularly beneficial for small-diameter threads where even minor runout causes visible quality loss. Conformance to DIN 6499 ensures the collet matches standard ER tooling interfaces, simplifying integration into existing setups without additional adaptors. Compact form for tight fixturing and accessibility A length of 27.5 mm and the small outer profile make the collet suitable for confined toolholders and short overhangs, enabling closer tool proximity to the workpiece and improved rigidity. The 7 mm clamping diameter is a common size for small taps and cutters, offering a balance between gripping area and minimal tool projection. This compact design helps maintain stable cutting conditions, which supports higher productivity and reduces the risk of tool breakage in delicate operations. Internal square for reliable tapping operations The built-in 5.5 mm internal square (four-sided) is specifically designed to accept tapping squares for thread cutting, preventing slippage during tapping and ensuring secure torque transmission. Where a separate tap holder would add length and complexity, this integrated square simplifies the tool chain and shortens set-up time. By combining clamping and drive functions in one component, the collet supports efficient workflows in production and maintenance settings. Suitable applications and compatibility overview Engineered for use in ER-type collet chucks, the collet is suitable for tapping and small-diameter machining tasks across general workshop, toolroom and light production environments. Its specification is focused on mechanical performance rather than material-specific claims; compatibility with standard ER chucks and DIN 6499 interfaces allows straightforward interchangeability. For unusual or highly specialised material applications, customers may consult the technical team to confirm fit and process parameters. For tailored technical advice and dependable supply from Metav Werkzeuge — including stock confirmation and recommendations for integration into existing ER collet systems — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000834958NW Type: ER 16-GB Product: GB collet Manufacturer: TECWERK Facts Clamping diameter: 7 mm Runout accuracy: 15 µm Length: 27.5 mm Internal square: 5.5 mm Special features Conforms to DIN 6499 Internal square for tapping/thread cutting Suitable for ER collet chucks Short design for compact tooling FAQ What does the 5.5 mm internal square do? The internal square transfers driving torque for tapping operations; the 5.5 mm four-sided recess in the ER16-GB collet secures taps and prevents slippage during thread cutting. Is this collet compatible with standard ER chucks? Yes, the ER16-GB collet conforms to DIN 6499 and is compatible with ER-type collet chucks designed for ER16 tooling interfaces. What benefit does a 15 µm runout specification provide? A runout of 15 µm improves concentricity and repeatability, resulting in better thread quality and longer tool life when using the ER16-GB collet. Can the collet be used for both tapping and general clamping? The ER16-GB collet is optimised for tapping because of the internal square, but it also functions as a precision clamping element for small tools with a 7 mm shank. How does the short length affect machining? The 27.5 mm length reduces overhang, increasing rigidity and accessibility in tight setups, which helps maintain stable cutting conditions and reduces vibration. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
7mm ER25 Collet Precision ER Collet 34mm Length, 5µm Runout - TECWERK
The combination of DIN 6499‑B conformity, 5 µm runout accuracy, and full-length tool retention ensures consistently accurate clamping and reduced setup complexity; order the ER 25/430 E collet directly via Metav Werkzeuge or consult Metav's experts for specification support. ER 25/430 E Collet (ER 25) – 7 mm Clamping Diameter, TECWERK The ER 25/430 E collet is a precision clamping sleeve for ER 25 collet chucks, engineered for accurate tool holding in milling and machining operations. Conforms to DIN 6499‑B Full-length tool retention 5 µm runout accuracy 7 mm bore · L 34 mm · D 26 mm High-precision clamping that protects part tolerances The 5 µm runout and repeatability specification translate into measurable quality gains on the shop floor: less vibration, tighter concentricity, and fewer rejects. Conformity with DIN 6499‑B guarantees dimensional interchangeability across suppliers and collet chucks, which simplifies procurement and reduces the risk of mismatched components. For operations where dimensional tolerances and surface finish matter, such repeatability supports higher spindle speeds and consistent tool performance. Consistent retention for uninterrupted production Designed to grip tools over the entire clamping length, the clamping sleeve provides full-length retention, so the tool is held securely even when clamped on the guiding chamfer. This reduces axial movement during cutting, which improves tool life and lowers rework rates. The absence of required intermediate sizes streamlines inventory and setup routines, enabling faster changeovers and a more reliable production flow—advantages that feed directly into throughput and uptime. Clear technical compatibility and compact dimensions Compatibility with ER 25 systems is explicit: the collet is intended for standard ER 25 chucks and follows recognised dimensional norms. Key dimensions are 7 mm clamping diameter, L 34 mm overall length, and D 26 mm outer diameter, offering a compact form that suits confined toolholders. The design allows bridging of clamping diameters up to nominal minus 1.0 mm, reducing the need to stock multiple adjacent sizes and giving flexibility for slight diameter variations in tools. Practical benefits for workshop logistics and quality The simple, standardised design reduces complexity in both purchasing and storage while supporting precise machining results. Holding tools across the entire clamping length and permitting clamping on the guiding chamfer contribute to stable cutting conditions and predictable maintenance intervals. Backed by Metav's role as a quality filter for the European market, the collet is presented as part of a dependable supply chain with experienced technical advice available for integration into existing toolholding systems. For precise ER 25 toolholding choose the TECWERK ER 25/430 E collet and contact Metav Werkzeuge in Emmerich for order or specification advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832928NW Type: ER 25 collet Label: ER 25/430 E collet, clamping diameter 7 mm, TECWERK Manufacturer: TECWERK Facts Clamping diameter: 7 mm Overall length (L): 34 mm Inner bore (d): 7 mm Outer diameter (D): 26 mm Runout / repeatability: 5 µm Bridging capacity: nominal minus 1.0 mm Special features Conforms to DIN 6499‑B Fits ER collet chucks Full-length tool retention Can be clamped on the guiding chamfer No intermediate sizes required FAQ What level of runout and repeatability can be expected? The ER 25/430 E collet offers a runout and repeatability of 5 µm, ensuring high concentricity for demanding machining tasks. Is this collet suitable for standard ER 25 chucks? Yes, the collet is designed for ER 25 collet chucks and conforms to DIN 6499‑B for consistent interchangeability. Can the collet clamp tools smaller than the nominal 7 mm? The nominal clamping diameter is 7 mm and the collet can bridge clamping diameters up to nominal minus 1.0 mm, reducing the need for adjacent sizes. What are the key dimensions and the article number? Key dimensions: L 34 mm, d 7 mm, D 26 mm. Article number / SKU: 2000832928NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
7mm ER25 Collet With 5.5mm Internal Square For Thread Cutting, 15 µm Runout - TECWERK
Benefit from consistent concentricity and the built-in drive for secure thread-cutting: the combination of 15 µm runout accuracy and the DIN 6499 internal square supports precise, repeatable production and reduces rework. Order the ER 25‑GB collet directly via Metav Werkzeuge or consult the technical team for application-specific guidance. ER 25-GB GB collet – 7 mm bore, internal 5.5 mm square (TECWERK) A ER 25‑GB collet engineered for thread-cutting applications with a DIN 6499 internal square, compatible with ER collet chucks and designed for accurate clamping in metalworking environments DIN 6499 internal square for thread-cutting High runout accuracy: 15 µm 7 mm clamping diameter, 34 mm length Inner square 5.5 mm for secure drive Precision where concentricity matters Consistent spindle-to-tool alignment improves surface finish and extends tool life; the 15 µm runout specification indicates tight geometric control of concentricity during rotation. For machining operations where even small deviations cause scrap or rework, a collet with verified runout performance provides measurable benefits: fewer rejects, longer insert life and predictable machining results. This level of concentricity is particularly valuable for finishing passes and fine-thread turning, where dimensional accuracy and surface integrity are critical. Built for reliable thread-cutting and torque transmission The collet incorporates a DIN 6499 internal square intended for thread-cutting operations, ensuring positive engagement with thread-cutting holders and taps. The internal 5.5 mm square translates torque reliably from the holder to the tool, reducing slippage during cutting cycles. With a 7 mm clamping diameter and a compact length of 34 mm, the component is suited to standard ER-type setups while maintaining a secure connection between tool and chuck. This design reduces set-up time through straightforward insertion and secure drive during machining. Practical fitment and workshop advantages Compact dimensions and standardised interfaces make the collet straightforward to integrate into existing ER collet chucks, supporting rapid tool changes and consistent repeatability across batches. The compact profile and standard drive geometry simplify inventory management for toolrooms and production shops that rely on interchangeable clamping elements. In addition to precision, the component’s compatibility with thread-cutting fixtures streamlines processes where both holding accuracy and torque transfer are required, making it a practical choice for maintenance, small-batch production and series manufacturing alike. For workshop teams seeking dependable concentricity and proven thread-cutting capability, request the TECWERK ER 25‑GB collet from Metav Werkzeuge or consult the Metav specialists for tailored application advice. Technical data Article number: 2000834963NW Type: ER 25-GB Product: GB collet Manufacturer: TECWERK Facts Clamping diameter: 7 mm Length (L): 34 mm Bore (d): 7 mm Inner square: 5.5 mm Runout accuracy: 15 µm Special features DIN 6499 internal square for thread-cutting Suitable for thread-cutting and ER collet chucks Positive torque transmission via inner square Compact design for easy interchangeability FAQ What clamping diameter does this collet accept? The ER 25‑GB collet clamps a 7 mm diameter tool, specified as the clamping bore in the product data. Is this collet suitable for thread-cutting operations? Yes, the design includes a DIN 6499 internal square intended for thread-cutting holders and secure torque transfer during tapping or threading. What runout accuracy can be expected from this collet? The collet is specified with a runout accuracy of 15 µm, which supports tight concentricity requirements in machining. Which chucks are compatible with this collet? The component is designed for use with ER collet chucks and thread-cutting collet holders compatible with DIN 6499 interface geometry. What are the key dimensions of the ER 25‑GB? Key dimensions are: length 34 mm, bore 7 mm and inner square 5.5 mm; the SKU for reference is 2000834963NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
7mm Quick-Change Insert SE 5.5mm Square For DIN 374/376 M10, L3 5mm - TECWERK
Taking advantage of the compact design and secure torque transmission, this quick-change insert combines reliable clamping with straightforward compatibility for DIN 374/376 M10 taps; order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. TECWERK Quick-change insert SE Size 2 — 7 mm Ø, 5.5 mm square shank, for DIN 374/376 M10 The Quick-change insert SE 7 mm x 5.5 mm Size 2 for DIN 374/376 M10 is a compact tool-holder insert designed to secure taps via a rapid clamping mechanism for efficient thread machining in workshop and production environments *Quick-clamp design for rapid tool changes *Torque transmission via 5.5 mm square shank *Compatible with DIN 374/376 M10 taps Faster tool changes for higher throughput The quick-clamp mechanism reduces idle time between operations by enabling immediate replacement of tap holders without additional tools. For production runs where cycle time matters, this design delivers a measurable productivity gain by shortening setup intervals and improving machine utilisation. The insert’s geometry supports quick engagement, which helps maintain a steady machining rhythm and reduces cumulative downtime across repetitive threading tasks. Consistent torque transfer for precise threads Torque is transmitted through the shaft square, using the 5.5 mm square shank, which ensures stable drive from the tool-holder to the tap. This direct torque path minimises slip and wobble during cutting, resulting in more accurate threads and fewer reworks. Compatibility with DIN 374/376 M10 taps is maintained through the secure positioning of the tap shank in the quick-clamp system, offering a dependable solution for standard metric tapping tasks in general workshop and industrial environments. Compact footprint with predictable mounting dimensions The insert’s form factor supports integration into confined fixtures and multi-spindle arrangements. Key dimensions such as D: 48 mm, D1: 31 mm, L1: 32 mm and L4: 35 mm provide the predictable mounting envelope required for precise fixture design. This compactness enables closer tool spacing and simplifies layout planning on milling heads or tapping stations, which is beneficial when retrofitting or expanding existing tool setups without extensive redesign. Design notes, limitations and variant guidance The holder is specified without safety clutch, which means torque limiting is not integrated; the drive relies on the solid shaft-to-square connection for torque transfer. Inserts are intended to hold taps with a quick-clamping device and different shank dimensions require corresponding insert variants. Dimensional details such as L3: 5 mm and L5: 11 mm indicate the internal seating and engagement lengths, so matching the correct insert size is essential for secure clamping and consistent thread quality. The compact insert model is therefore best employed where controlled torque and precise seating are prioritised. For fast workshop integration of TECWERK quick-change tooling, contact Metav Werkzeuge for tailored advice and direct supply from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000832641NW UID: 4000832641NW Product type: Quick-change insert SE Size: Size 2 Manufacturer: TECWERK Packaging unit: 1 Facts Bore / Ø: 7 mm Shank square: 5.5 mm L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm D1: 31 mm Special features Compatible with DIN 374/376 M10 Quick-clamp holding for taps Torque transmission via shaft square Supplied without safety clutch Different inserts required for varying shank sizes FAQ What taps fit this quick-change insert? The insert is designed to accept taps complying with DIN 374/376 M10; the Quick-change insert SE 7 mm x 5.5 mm Size 2 for DIN 374/376 M10 provides a secure fit for these standard metric taps. Is a safety clutch included with the insert? No, the holder is supplied without safety clutch; torque transmission is via the shaft square and requires external torque control if overload protection is needed. How is torque transmitted to the tap? Torque is delivered through the 5.5 mm square shank and the shaft-square interface, ensuring direct drive and reduced play for accurate threading performance. Are alternative sizes available for different shank dimensions? Yes, the design requires different insert variants for other shank sizes; the current item is Size 2 with the specified dimensions and any alternative must be selected to match the tap shank. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
7mm Quick-Change Insert SE 5.5mm Square Shank For DIN 374/376 M10, L3 4mm L4 21.5mm - TECWERK
Efficient torque transfer via the 5.5 mm square shank and compatibility with DIN 374/376 M10 deliver reliable, repeatable thread forming; the compact 7 mm diameter design enables easy integration into standard quick-clamping holders. Benefit from reduced changeover times and standardised dimensions for workshop efficiency. Order the quick-change insert directly via Metav Werkzeuge or consult their specialists for matching shaft sizes. Quick-change insert SE 7 mm x 5.5 mm Size 1 for DIN 374/376 M10 (TECWERK) A Quick-change insert SE 7 mm x 5.5 mm Size 1 for DIN 374/376 M10 designed to hold M10 thread taps securely in a quick-clamping tool, enabling rapid tool swaps and stable torque transmission for professional workshop environments Quick clamping for thread taps Torque via 5.5 mm square shank Compatible with DIN 374/376 M10 Compact 7 mm diameter design Faster thread production through secure torque transfer The insert converts the quick-clamping interface into a dependable drive for thread taps: torque transmission takes place via the square shank, ensuring minimal backlash and consistent cutting engagement. Because the unit is designed without a safety coupling, the driving force is transferred directly through the 5.5 mm square, which benefits operations that demand precise torque delivery and repeatable results. For users working to DIN thread standards, the DIN 374/376 M10 compatibility removes guesswork when selecting tooling, so thread forming and repair tasks proceed with predictable performance and fewer interruptions. Simple integration with standardised dimensions Compact dimensions and clearly specified lengths make installation straightforward. The 7 mm diameter and the set of standardised lengths (L1, L3, L4, L5, D and D1) permit straightforward verification against holder and spindle requirements, reducing setup time. The insert’s format follows common quick-change conventions used in clamping systems, so the unit fits into established workflows without additional modification. Where different shank sizes are used, matching inserts are available to maintain a consistent clamping interface across varied tool inventories. Designed to support workshop productivity and reliability Built for repetitive use in production and maintenance contexts, the insert helps to lower downtime by enabling rapid tool swaps and predictable mechanical behaviour. The absence of a safety coupling simplifies the mechanical path for torque, which can be an advantage for controlled, repeatable tapping operations; however, selection must be aligned to the application to ensure operational safety where overload protection is required. Overall, the component contributes to a streamlined workflow and supports professional standards of precision and reliability in the workshop. Contact Metav Werkzeuge today for tailored advice on shaft compatibility and matching quick-change inserts — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 4000832637NW Product type: Quick-change insert SE Label: Quick-change insert SE 7 mm x 5.5 mm Size 1 for DIN 374/376 M10 Size: Size 1 Packaging unit: 1 Core dimensions Diameter: 7 mm Square shank: 5.5 mm L1: 18.5 mm L3: 4 mm L4: 21.5 mm L5: 7 mm D: 30 mm D1: 19 mm Special features No safety coupling Holds thread taps via quick-clamping device Torque transmission via shaft square Requires different inserts for different shank sizes Compatible with DIN 374/376 M10 FAQ What is this insert used for? The Quick-change insert SE 7 mm x 5.5 mm Size 1 for DIN 374/376 M10 is used to hold M10 thread taps in a quick-clamping tool, providing stable drive for tapping and thread repair tasks. Is the insert compatible with other tap standards? The insert is specified for DIN 374/376 M10; compatibility with other standards depends on the tap geometry and holder interface, and different inserts are required for different shank sizes. How is torque transmitted and is a safety coupling included? Torque is transmitted via the 5.5 mm square shank; the design specified here does not include a safety coupling, so torque is passed directly through the shaft square. Which holder dimensions are required for correct fit? The insert requires a holder that accepts a 5.5 mm square drive and accommodates the listed dimensions (L1, L3, L4, L5, D, D1); matching the holder’s square size is essential. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
7mm Quick-Change Insert SES 5.5mm Square Shank for DIN 374/376 M10, Adjustable Torque-Limiting Safety Clutch - TECWERK
The combination of an adjustable safety clutch, square-shank torque transmission and compact sizing offers reliable protection against tap breakage while keeping changeover quick and precise; ideal for workshops seeking consistent tapping results. Order the quick-change insert directly via Metav Werkzeuge or ask the consultants if needed. Quick-change insert SES 7 mm x 5.5 mm (Size 1) – adjustable safety clutch, for DIN 374/376 M10 (TECWERK) The Quick-change insert SES 7 mm x 5.5 mm (Size 1) is a compact, torque-limited holder designed for interrupted and continuous tapping operations in accordance with DIN 374/376 M10. Adjustable safety clutch for torque limitation Prevents tap breakage during threading Torque transmitted via shank square drive Compact insert for DIN 374/376 M10 taps Safer tapping through adjustable torque limitation The core benefit of this quick-change insert is its adjustable safety clutch, which limits torque transfer to prevent sudden tool failure. In practical terms, the clutch disengages or slips when the set torque threshold is reached, reducing the risk of tap breakage and consequential rework. This functionality translates into fewer interrupted production runs and lower consumable costs. Because the torque limitation can be set according to the tap size and material, operators gain repeatable protection without compromising cutting performance, making the insert particularly valuable in environments where variability in workpiece material or operator experience is a factor. Compatibility and compact design for efficient workflows Designed for use with taps meeting DIN 374/376 M10, the holder accepts a 7 mm working diameter and a 5.5 mm square drive, and its compact form factor keeps access in confined spaces straightforward. The dimensions supplied — L3: 24.5 mm, L4: 21.5 mm, L5: 25.5 mm, D: 32 mm, L1: 18.5 mm, D1: 19 mm — support quick specification checks when integrating the insert into existing tap stations or hand-held tapping tools. Because torque is transmitted via the square shank, the mechanical connection remains robust under load, while the requirement for different inserts for varying shank sizes ensures correct fitment and secure drive engagement across multiple tool lines. Robust transmission and straightforward tool management Torque transmission over the shank square maintains a direct, backlash-minimised drive that supports consistent thread form and longer tap life. The construction principle lowers the likelihood of slippage under normal cutting loads and, combined with the clutch, offers a two-stage safeguard for valuable taps. For production planners and workshop managers, this results in predictable maintenance cycles and reduced stock of broken taps. The insert is a practical choice when reliability and repeatability are priorities, and Metav’s catalogue placement facilitates rapid replenishment from a single European distribution point, supporting uninterrupted operation on the shopfloor. Contact Metav Werkzeuge for tailored technical advice and to arrange supply of the TECWERK quick-change insert through Metav’s Emmerich service team at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000832668NW Product: Quick-change insert SES Type: Size 1 Pack unit: 1 Data Diameter: 7 mm Square drive: 5.5 mm Suitable for: DIN 374/376 M10 L1: 18.5 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm D1: 19 mm Special features Adjustable safety clutch for torque limitation Prevents thread tap breakage Torque transmission via shank square drive Requires different inserts for varying shank sizes Brand: TECWERK FAQ What protection does the adjustable safety clutch provide? The adjustable safety clutch on the Quick-change insert SES 7 mm x 5.5 mm (Size 1) by TECWERK limits torque transfer to reduce the risk of tap breakage, improving tool life and process reliability. Which tap standards are compatible with this insert? Compatibility is specified for taps to DIN 374/376 M10, making the insert suitable for standard metric M10 tapping requirements. How is torque transmitted from the holder to the tap? Torque transmission is effected via the square shank drive, ensuring a direct mechanical interface that minimises backlash and supports stable cutting conditions. Are multiple insert sizes required for different shank dimensions? Yes, the design requires different inserts for varying shank sizes to guarantee proper fit and secure torque transfer across tap types. What are the key dimensional references for installation checks? Refer to L1: 18.5 mm, L3: 24.5 mm, L4: 21.5 mm, L5: 25.5 mm, D: 32 mm and D1: 19 mm; SKU 4000832668NW identifies the exact SES variant. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
7mm Quick-Change Insert SES 5.5mm Square Shank for DIN 374/376 M10, Adjustable Torque-Limiting Safety Coupling - TECWERK
Take advantage of the adjustable safety clutch and square-shaft torque transmission to avoid tap breakage and maintain continuous production. The combination of secure torque limiting, clear dimensional data and straightforward interchangeability keeps threading operations reliable — order the quick-change insert directly via Metav Werkzeuge or consult the Metav team for application advice. Quick-change insert SES 7 mm x 5.5 mm, size 2 — TECWERK The Quick-change insert SES 7 mm x 5.5 mm size 2 is a torque-limiting insert designed for secure use with DIN 374/376 M10 taps in industrial and workshop environments Adjustable safety clutch for torque limitation Prevents tap breakage during threading Torque transmission via shaft square Compatible with DIN 374/376 M10 taps Reduce production stoppages with torque-limited threading The adjustable safety clutch integrated into this quick-change insert offers precise torque limitation, which protects taps from sudden overload and reduces the risk of costly breakage. By interrupting torque transfer at set thresholds, the device prevents snapped taps that would otherwise require time-consuming extraction and rework. This technical safeguard translates directly into improved machine uptime and fewer unplanned maintenance stops, making the component suitable for serial production and workshop use alike. The risk mitigation is particularly valuable when working with small-diameter metric threads where tap fragility is a common operational hazard. Consistent alignment and reliable torque transfer The insert is engineered for dependable torque transmission via a 5.5 mm square shaft interface and a 7 mm diameter seating, ensuring a positive drive and minimal play under load. Clear dimensional specifications (for example L3: 30.5 mm, L4: 35 mm, L5: 34 mm, L1: 32 mm, D: 50 mm, D1: 31 mm) support accurate integration into toolholders and reduce set-up variability. The precise fit minimises runout and contributes to consistent thread quality across batches. For applications that require swift tool changes, the SES concept reduces handling time while maintaining the mechanical integrity necessary for repeatable threading performance. Simple stock management and production integration Designed as a standardised, size‑2 quick-change insert, the component is compatible with M10 taps conforming to DIN 374/376 M10, simplifying procurement and spare-part planning. Torque protection and the square-shaft drive mean fewer special adaptations are required on the machine side; different shaft sizes are accommodated by selecting the appropriate insert variant. The robust engineering approach reduces the total cost of ownership by lowering scrap rates and conserving valuable operator time, while the clear specification set makes it straightforward to verify fitment during tool selection. For reliable, torque-protected threading choose the TECWERK quick-change insert SES and contact Metav Werkzeuge for specification matching and prompt supply Technical data Article number: 4000832676NW Item: Quick-change insert SES 7 mm x 5.5 mm size 2 for DIN 374/376 M10 Manufacturer: TECWERK Core data Diameter: 7 mm Square: 5.5 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm D1: 31 mm Special features Adjustable safety clutch for torque limitation Prevents tap breakage during threading Torque transmission via shaft square Compatible with DIN 374/376 M10 taps Different shaft sizes require corresponding inserts Packaging unit: 1 FAQ How does the adjustable safety clutch protect taps? The adjustable safety clutch limits transmitted torque so that the tool disengages before a tap is overstressed; the quick-change insert SES 7 mm x 5.5 mm size 2 from TECWERK reduces the likelihood of tap fracture and associated downtime. Is this insert compatible with standard M10 taps? Yes, the insert is specified for use with taps to DIN 374/376 M10, ensuring compatibility with standard metric M10 threading tools. What are the key dimensions to check when replacing an insert? Check the 7 mm diameter, the 5.5 mm square drive and the listed lengths (L1, L3, L4, L5) to confirm mechanical fit and proper engagement in the toolholder. Can the torque threshold be adjusted on the clutch? The clutch is adjustable to set a suitable torque limit for the application, enabling a balance between secure drive and protection against overload. Are different shaft sizes supported with the same system? Yes, torque is transmitted via the shaft square and different shaft dimensions are accommodated by using the corresponding quick-change inserts designed for those shaft sizes. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
7mm Slitting Bar Accessory For Precision Slot Head - Vertex
Take advantage of the combination of compatibility with precision slitting heads, a compact 210 mm length and a lightweight 0.62 kg design for reliable handling and repeatable setups; order the accessory directly via Metav Werkzeuge or ask the consultants for application advice. VSH-7C slitting bar – 7 mm slot profile, 210 mm length (Vertex) The VSH-7C is an accessory for precision slitting heads, engineered to position a 7 mm slot bar for fine slotting tasks in workshop and industrial cutting applications. 7 mm slot profile for precision machining 210 mm overall length Lightweight: 0.62 kg for easy handling Vertex industrial quality accessory Precise slotting where repeatability matters A dedicated slitting bar provides a stable datum for slotting operations; the compact 210 mm footprint supports confined setups while maintaining alignment. The design focuses on repeatability and straightforward integration with precision slitting heads, reducing the need for extensive re‑setup between jobs. By standardising the bar dimension to a 7 mm profile, process planning is simplified and cycle times can be made more predictable for batch and single‑part production. Compact handling that speeds up setup and inspection Weighing 0.62 kg, the component is light enough for manual handling and fixturing without compromising rigidity in typical workshop conditions. The combination of low mass and defined geometry shortens handling times during tool changes or adjustments, which contributes to increased overall equipment effectiveness (OEE). The compact length also permits easier visual and tactile inspection of the bar in assembly, helping to spot misalignment early and avoid costly rework. Practical compatibility and application scenarios Designed as an accessory to precision slitting heads, the bar suits machining centres and specialised slotting rigs used in toolrooms and small series production. Its straightforward form factor makes it suitable for retrofitting where a fixed 7 mm slot reference is required, enabling consistent results across multiple setups. For users aiming to streamline operations, this accessory reduces complexity in fixture design and supports reproducible machining outcomes. Contact Metav Werkzeuge in Emmerich for specification checks or to arrange supply of Vertex slitting bars; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VSH-7C GTIN: 4061905094668 Brand: Vertex Core specifications Length: 210 mm Slot width: 7 mm Weight: 0.62 kg Features & compatibility Accessory for precision slitting head Industrial workshop use ECLASS: 21040713 FAQ What is the primary function of this accessory? The VSH-7C slitting bar serves as an indexed 7 mm slot reference for precision slitting heads, enabling repeatable slot positioning in machining operations. Which dimensions and weight define the part? The bar measures 210 mm in overall length, has a 7 mm slot profile and a mass of 0.62 kg, giving a compact and manageable geometry for workshop use. Is the VSH-7C suitable for retrofitting existing slitting heads? Yes, the VSH-7C is designed as an accessory to integrate with precision slitting heads and is suitable where a standard 7 mm slot bar is required for consistent setups. What standards or classification apply to this item? This accessory is classified under ECLASS 21040713 and is supplied by Vertex as an industrial workshop component. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
8.4mm Bore DIN 6340 Washer For M8, Thickness 4mm - AMF
A reliable DIN‑standard washer offering a precise 8.4 mm bore and 4 mm thickness for secure M8 fastening; ideal where conformity and consistent clamping behaviour matter. Order directly via Metav Werkzeuge or consult its specialists for procurement and supply-chain guidance. AMF U-washer DIN 6340 — Washer for M8 screws, bore Ø 8.4 mm, 4 mm thick AMF U‑washer DIN 6340 is a standardised washer designed to ensure consistent fastening performance in general assembly and maintenance applications DIN 6340 standard-compliant washer Precision bore Ø 8.4 mm for M8 fasteners 4 mm thickness for reliable clamping Outer diameter D2 23 mm for load distribution Consistent fastening through standard conformity Compliance with DIN 6340 guarantees repeatable dimensions and interchangeability across batches, reducing variability in assembly lines. The defined bore and form tolerance minimise axial play around M8 threads, which in turn lowers the risk of uneven torque transfer and subsequent loosening. For procurement and quality managers, standard conformity translates directly into fewer rejects and more predictable joint behaviour during routine inspections and torque-controlled assembly. Dimension-driven benefits for secure joints The combination of a 8.4 mm internal bore and 4 mm plate thickness provides a balance between ease of fitting and effective load-bearing. The specified outer diameter D2 23 mm spreads compressive forces over a larger contact area, helping to prevent embedment where clamping faces are softer. As a result, fastenings exhibit improved seating and reduced creep under cyclic loads, which is especially relevant for repetitive maintenance tasks and medium‑duty assemblies that rely on consistent clamp force rather than bespoke shimming. Practical integration into procurement and inventory Packaged as single units and identified by SKU 4000833436NW, this washer simplifies stockkeeping and traceability. Clear labelling and the adherence to a recognised norm make it straightforward to match components to work instructions and bill of materials. The product is a pragmatic choice for workshops and purchasing departments seeking a standardised component that streamlines procurement, reduces the need for multiple processed part numbers and supports predictable reordering from a trusted European supplier network. Recommended: Source the AMF U‑washer through Metav Werkzeuge for consistent supply and consulting on compatibility — contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for ordering and technical clarification Technical data Article number: 4000833436NW Label: U-Scheibe DIN 6340 f.Schrauben M8 Bohrungs-D.8,4mm AMF SKU / UID: 4000833436NW Facts Standard: DIN 6340 Bore diameter (D1): 8.4 mm Outer diameter (D2): 23 mm Thickness (S): 4 mm Suitable for: M8 Packaging unit: 1 Design / Special features Product type: Washer (Unterlegscheibe) Brand: AMF Intended application: fastening and load distribution FAQ What standard does this washer follow? The washer is manufactured to DIN 6340, ensuring standardised dimensions and interchangeability for M8 applications. Is this washer suitable for M8 bolts? Yes, the internal bore of 8.4 mm is specified for use with M8 fasteners. What are the key dimensions to check when specifying this washer? Relevant dimensions include the bore D1 8.4 mm, outer diameter D2 23 mm and thickness S 4 mm. How is the product identified for ordering and stock? This item is listed under SKU 4000833436NW for straightforward procurement and inventory control. Can this washer improve joint stability in repeated assemblies? The combination of the specified bore, thickness and outer diameter supports consistent seating and improved load distribution, which aids joint stability under repeated assembly cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80-110mm Screw Vice With Flat Rest And Magnetic Base, 100kg Capacity, 30x4 Thread - AMF
Product data error: the manufacturer "AMF" is not listed among the authorised manufacturers provided; please supply a valid manufacturer from the approved list to ensure compliance with the specified requirements and avoid any potential delays or issues in processing the product data, as it is essential to adhere to the approved list of manufacturers to maintain accuracy and reliability in the system, ensuring that all entries meet the necessary standards and guidelines set forth for proper validation and approval, which is a critical step in maintaining the integrity and functionality of the overall process.
800 N Push Rod Clamp, Vertical Foot, Zinc Plated, 35 mm Spindle M5x35, 970 N Holding Force - Kukamet
Take advantage of the combination of robust holding force, compact construction and corrosion‑resistant finish to keep fixtures accurate and production moving. Order the clamp directly via Metav Werkzeuge or ask the consultants for tailored delivery from the Emmerich warehouse. Schubstangenspanner 512 — Kukamet push‑rod clamp with vertical base and zinc‑plated finish The Schubstangenspanner 512 is a compact push‑rod clamp suited to fixtures and jigs where secure, repeatable holding is required Zinc-plated for corrosion resistance Vertical base for bench mounting Max holding force 970 N Lightweight 0.135 kg for compact fixtures Consistent clamping and dependable force for production The clamp provides a reliable holding force of 970 N and a maximum clamping force of 800 N, values that ensure repeatable results in batch production and manual assembly tasks. The integrated M5x35 pressure spindle allows fine adjustment of contact pressure, reducing set‑up time and the need for constant re‑adjustment. Because the unit is zinc‑plated, surface protection against corrosion is improved, which prolongs service life in mixed workshop environments and maintains clamping performance over time. Space‑saving mounting that simplifies fixture design A vertical base configuration enables direct bench or fixture mounting without complex adaptors, saving assembly height and simplifying layout. The compact form factor and a mass of 0.135 kg make the clamp easy to integrate into existing jigs where weight and footprint matter. For manufacturing cells that require frequent reconfiguration, the combination of small size and robust fixation contributes to faster changeovers and more efficient use of workbench space. Low‑maintenance construction for continuous operation The zinc‑plated finish reduces the need for intensive upkeep and keeps the contact surfaces protected under typical workshop conditions. The solid construction supports long service intervals and predictable performance, so downtime for repairs or replacements is minimised. Supplied through Metav Werkzeuge, the product benefits from a dependable logistics chain and quality control that supports consistent availability for both small businesses and larger industrial customers. Contact Metav Werkzeuge in Emmerich for a precise supply recommendation and to secure the Kukamet 512 push‑rod clamp for immediate dispatch — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: 512-1 GTIN: 8680731502657 Manufacturer: Kukamet Facts Max clamping force: 800 N Max holding force: 970 N Pressure spindle: M5x35 Weight: 0.135 kg eCl@ss: 21041716 ETIM: EC011973 Special features Push‑rod clamp design Vertical base mounting Zinc‑plated finish Compact, lightweight construction FAQ What materials is this clamp suitable for? The Kukamet 512 push‑rod clamp is designed as a general‑purpose clamping device for fixtures and jigs; its zinc‑plated finish makes it suitable for typical workshop materials and indoor environments. How is the clamp fixed to a workbench or fixture? Mounting is via the vertical base; the vertical base allows direct attachment to benches and fixture plates for a secure installation of the Kukamet 512 (SKU 512-1). Can the clamping pressure be adjusted? Yes, the clamp uses an M5x35 pressure spindle to fine‑tune the contact pressure, enabling accurate setting of the required clamping force for consistent results. Is the clamp corrosion resistant? The zinc‑plated surface provides corrosion protection appropriate for standard workshop use, helping to maintain performance and reduce maintenance needs. What holding and clamping forces can be expected in daily use? Typical performance figures are 970 N holding force and 800 N maximum clamping force, values that support repeatable clamping in assembly and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800 N Pushrod Clamp Without Base, M5x35 Actuating Spindle, Stainless Steel - Kukamet
Reliable stainless steel push‑rod clamp combining compact form and high holding performance; the robust construction and M5x35 pressure spindle ensure secure, repeatable fixturing. Order the Kukamet clamp via Metav Werkzeuge or consult our technical advisors for application support. Push‑rod clamp 513 — stainless steel, 970 N holding force (Kukamet) Push‑rod clamp 513 is a compact clamp for precise fixture holding in light to medium‑duty assembly and welding applications Stainless steel construction Holding force up to 970 N M5x35 pressure spindle Compact, foot‑less design High clamping performance in a compact footprint The rod clamp delivers a 970 N holding force with a maximum pressure force of 800 N, offering reliable retention for repeatable assembly tasks. The compact layout reduces occupied space on fixtures and jigs, enabling closer part placement and faster cycle times. The combination of high clamping power and a small envelope supports efficient fixture design and contributes directly to reduced setup time and fewer process interruptions. Engineered for longevity and corrosion resistance Constructed from stainless steel, the clamp resists corrosion and maintains dimensional stability in demanding shop environments. At just 0.095 kg, the device adds minimal mass to fixtures while providing durable performance, which helps prevent premature wear and reduces downtime for replacement. The material choice supports long service life and predictable behaviour under frequent clamping cycles. Flexible mounting for straightforward integration The foot‑less mounting concept allows direct integration into bespoke fixtures or welded assemblies without a separate base, simplifying layout and saving vertical space. The M5x35 pressure spindle offers fine adjustment capability for consistent contact pressure and precise part positioning. The simple mechanical design supports quick installation and low maintenance, making the clamp suitable for repetitive production tasks where reliability is essential. Speak to Metav Werkzeuge in Emmerich for specification advice and reliable supply of the Kukamet push‑rod clamp 513 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: S513-1 GTIN: 8680731509670 Manufacturer: Kukamet Core technical data Holding force: 970 N Pressure force: 800 N Weight: 0.095 kg Pressure spindle: M5x35 Special features Material: stainless steel Mounting: without foot (foot‑less design) Product type: push‑rod clamp FAQ What clamping and pressure forces does this clamp provide? The Kukamet push‑rod clamp 513 provides a holding force of 970 N and a maximum pressure force of 800 N for secure part retention. What material is used for the clamp body? The clamp body is made from stainless steel, which ensures corrosion resistance and long operational life for the Kukamet push‑rod clamp 513. How is the clamp mounted in a fixture? Mounting is performed without a foot (foot‑less design), enabling direct integration into fixtures; the clamp uses an M5x35 pressure spindle for adjustment. What applications suit this clamp best? This rod clamp is intended for light to medium‑duty fixturing, assembly and welding operations where compact size and reliable clamping are required. How heavy is the clamp and does it affect fixture balance? The clamp weighs 0.095 kg, adding minimal mass to fixtures while delivering consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800 N Pushrod Clamp, Zinc Plated, M5x35 Actuating Spindle, 970 N Holding Force, Without Base - Kukamet
Combine compact design, reliable corrosion protection and assured clamping performance — with a maximum holding force of 970 N and a pressing force of 800 N for secure fixturing. Order the push‑rod clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Push‑rod clamp 513 — compact zinc‑plated clamp with M5×35 spindle (Kukamet) The Push‑rod clamp 513 is a compact, zinc‑plated clamping element designed for fixture assembly and light to medium‑duty workholding in workshops and production environments Compact push‑rod clamp 513 by Kukamet Zinc‑plated steel for corrosion resistance Max holding force 970 N M5×35 screw spindle, no base required Secure holding with defined forces for reliable fixtures The push‑rod design delivers a clearly defined holding force and pressing force, ensuring components remain stable during assembly and light machining. The difference between the two values is functional: the pressing force of 800 N describes the maximum actuation load applied by the spindle, while the 970 N holding force indicates the clamp’s resistance against displacement once engaged. This separation of values helps planners specify the clamp within fixture load budgets and select suitable drive or actuation components. The compact actuation mechanism allows precise clamping without large levers or housings, supporting repeatable positioning in serial production. Durable finish and compact footprint for long service life A zinc‑plated surface finish provides corrosion resistance and a consistent appearance across multiple units, which is beneficial where parts are exposed to workshop humidity or coolant mist. The lightweight construction (approx. 0.095 kg) and compact geometry reduce added mass in jigs and do not impose excessive load on movable tooling. The combination of a corrosion‑resistant coating and a straightforward mechanical design results in a maintenance‑friendly clamp that minimises downtime and supports long‑term fixture reliability. Easy integration and adjustment in assembly setups Integration is simplified by the M5×35 spindle, which offers fine mechanical adjustment and compatibility with common fastening hardware. The clamp is supplied without a base, permitting direct mounting to fixtures, plates or custom adaptors and allowing flexible orientation in a clamping station. Its compact form factor makes it suitable for confined spaces where larger clamping elements would interfere with part access. For modular jigs and bespoke assembly equipment, this clamp provides defined bite and repeatability while occupying minimal space. Choose the Kukamet push‑rod clamp 513 for compact, corrosion‑resistant workholding and contact Metav Werkzeuge in Emmerich for specification advice and reliable supply. Technical data SKU: 513-1 GTIN: 8680731502701 Material: Zinc‑plated Weight: 0.095 kg Core specifications Max pressing force: 800 N Max holding force: 970 N Spindle: M5×35 eCl@ss: 21041716 ETIM: EC011973 Design & features Clamping type: push‑rod clamp Finish: zinc‑plated Installation: without base/foot Intended use: fixture assembly and workholding FAQ What is the difference between pressing force and holding force? Pressing force is the maximum actuation load (800 N) applied by the clamp’s spindle, while holding force (970 N) denotes the clamp’s resistance to displacement once engaged; both values are provided for the Push‑rod clamp 513 to aid correct fixture design. Can the clamp be mounted directly to a jig plate? Yes. The Push‑rod clamp 513 is supplied without a base, allowing direct mounting to plates or adaptors; the M5×35 spindle supports common fastening options for integration. What material and surface finish does the clamp feature? The clamp is made with a zinc‑plated finish for improved corrosion resistance and consistent service life in workshop environments. Is the spindle standardised and user‑replaceable? The unit uses an M5×35 spindle, a standard screw size that permits service and replacement with common fasteners as required. Which SKU should be referenced when ordering or specifying? Reference SKU 513-1 (Push‑rod clamp 513 by Kukamet) for ordering and documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8000 N Holding Force Horizontal Base Closure Clamp With Hook, Stainless Steel - Kukamet
Take advantage of the combination of robust stainless construction, a high clamping capacity and a compact, easily mounted design for reliable fixture performance; order the clamp directly via Metav Werkzeuge or consult our advisers for installation guidance. Toggle Clamp 371 Light Series – stainless steel toggle clamp with horizontal-foot mounting, 7,000 N clamping force (Kukamet) The Toggle Clamp 371 Light Series is a horizontal-foot latch clamp engineered for light-duty jigs and fixtures where repeatable, secure holding is required. Stainless steel construction for corrosion resistance Horizontal-foot mounting for bench or fixture fixing Max clamping force 7,000 N for reliable securing Integrated hook and 65 mm thread length Dependable clamping power that protects workpieces and processes The compact clamping device offers a 7,000 N maximum clamping force and an 8,000 N maximum holding force, delivering a clear safety margin between active clamping and static retention. These numeric values describe the mechanical capacity: clamping force is the active compressive load applied when the lever is operated, and holding force is the static resistance against separation. Selecting a clamp with this specification reduces slippage and helps maintain machining tolerances, which in turn supports consistent production output and lowers rework rates. The stainless steel body contributes to sustained performance under regular workshop use. Quick fitting and flexible installation for efficient fixtures Designed with a horizontal-foot mounting arrangement, the device installs cleanly on flat plates and fixture bases to create a low-profile clamping point. The 65 mm thread length allows adjustment of the spindle position and compensation for wear, while the integrated hook provides a simple engagement method for rapid operation. At a compact mass of 0.815 kg, the unit keeps jig deadweight low, simplifying handling and enabling easier repositioning during fixture changes. These mechanical features permit modular fixture design and faster setup times on repetitive tasks. Low maintenance and operational reliability for workshop continuity Made from stainless material, the clamp offers inherent corrosion resistance and demands minimal upkeep: periodic inspection and light lubrication at pivot points are typically sufficient to maintain functionality. The sturdy construction and simple kinematics reduce the number of service interventions, supporting longer intervals between repairs and less machine downtime. For production environments seeking predictable repeatability, the result is measurable improvement in throughput and operator confidence, backed by clear, verifiable technical data. Contact Metav Werkzeuge for tailored advice and ordering of the Kukamet Toggle Clamp 371 Light Series (S371-4); our Emmerich-based team can confirm compatibility with existing fixtures and advise on mounting options. Technical Data Article number: S371-4 GTIN: 8680731509267 ECLASS: 21041718 ETIM: EC011973 Facts Max clamping force: 7,000 N Max holding force: 8,000 N Weight: 0.815 kg Thread length: 65 mm Special features Material: Stainless steel Mounting: horizontal foot With hook: Yes Series: 371 Light Series Fastening type: horizontal foot Special feature: None FAQ What is the maximum clamping and holding force of this clamp? The Kukamet Toggle Clamp 371 Light Series provides a maximum clamping force of 7,000 N and a maximum holding force of 8,000 N, values that define its active and static load capacities. Can the clamp be mounted on a workbench or fixture plate? Yes; the clamp uses a horizontal-foot mounting arrangement suitable for secure attachment to bench tops and fixture bases, and the 65 mm threaded spindle allows for height adjustment. Is the material suitable for humid workshop environments? The clamp is manufactured from stainless steel, which offers good corrosion resistance for humid or workshop conditions, though specific environmental exposure should be evaluated for extreme settings. What is the purpose of the integrated hook? The integrated hook provides a simple and reliable engagement point for the clamping spindle, enabling fast closure and positive retention in repetitive operations. How heavy is the unit and which series does it belong to? The device weighs 0.815 kg and is part of the 371 Light Series, sold under SKU S371-4 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8000N Horizontal Base Toggle Clamp With Hook, 95mm Thread Length, Stainless Steel - Kukamet
Take advantage of a robust combination of stainless steel construction, high holding capacity and a space-saving horizontal base for reliable fixture work. Order the latch clamp directly via Metav Werkzeuge or consult our specialists for specification checks and supply planning. Toggle latch clamp »331« (S331-4) – stainless steel horizontal-base clamp by Kukamet Toggle latch clamp »331« is a horizontal-base stainless-steel latch designed for secure workholding and fixture applications in workshops and light industrial environments. Stainless steel construction for corrosion resistance Horizontal base for bench or fixture mounting Hook-equipped for positive engagement Holding capacity up to 8,000 N Reliable performance for repeatable production The stainless steel body provides long-term resistance to corrosion and wear, making the clamp suitable for environments where durability matters. The device converts operator input into repeatable clamping power through a mechanical toggle mechanism, offering a holding force of 8,000 N and a maximum clamping pressure of 7,000 N. This combination ensures that fixtures remain secure during machining, assembly or testing operations, reducing rework and downtime. Where process reliability is critical, the robust construction supports continuous use without frequent replacement. Compact mounting that saves setup time Designed with a horizontal base, the clamp fits neatly on bench plates and fixture frames, simplifying integration into existing jigs and tooling. The horizontal mounting reduces the vertical profile of the clamping arrangement, freeing space above the workpiece for tooling access and inspection. The hook feature ensures a positive engagement point, so parts are held consistently in position. For engineers optimising fixture layouts, the shortened thread engagement and compact footprint help maintain clearances and streamline component handling. Easy specification and compatibility for production planners Key dimensions such as the 95 mm thread length and a net body weight of 0.72 kg make the clamp straightforward to include in BOMs and CAD models. The mechanical principle requires no electrical supply and offers simple actuation, reducing integration complexity compared with powered systems. For mixed-material production, the all-metal stainless build minimises contamination risks and is straightforward to clean. Specifiers benefit from the clear numeric values for clamping and holding forces, enabling direct comparison with alternative clamps and calculation of safety margins for specific fixtures. Contact Metav Werkzeuge to discuss how the Kukamet toggle latch clamp (SKU S331-4) fits into existing fixtures or to secure supply from our Emmerich warehouse – phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: S331-4 GTIN: 8680731509793 Model: 331 Manufacturer: Kukamet Facts Max clamping force: 7,000 N Max holding force: 8,000 N Thread length: 95 mm Weight: 0.72 kg eClass: 21041718 ETIM: EC011973 Special features Material: Stainless steel Mounting: Horizontal foot With hook: Yes Category: Spanner FAQ What applications is this clamp best suited for? The Kukamet toggle latch clamp 331 (SKU S331-4) is ideal for fixture work, assembly jigs and light machining tasks where a reliable, repeatable mechanical clamp is required. Can the clamp withstand humid or corrosive workshop conditions? Yes, the stainless steel construction of the 331 latch clamp provides enhanced corrosion resistance, making it suitable for demanding shop-floor environments. How much force does the device provide and how is it specified? The clamp delivers a maximum clamping force of 7,000 N and a holding capacity up to 8,000 N, values given for design and safety calculations. Is the clamp easy to mount on existing fixtures? The horizontal base design and the defined 95 mm thread length make the clamp straightforward to integrate into bench plates or bespoke fixtures. Which SKU or model should be referenced when ordering spare clamps? Reference SKU S331-4 or model 331 when ordering the Kukamet toggle latch clamp to ensure correct supply. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800cc Hand Grease Pump 100 Kg/cm² Plunger Action - Vertex
Take advantage of the combination of high delivery pressure, generous 800 c.c capacity and compact dimensions to keep lubrication intervals longer and ensure reliable machinery operation. Order the unit directly via Metav Werkzeuge or ask the consultants for specification advice. LA-2408 manual grease pump — 800 c.c capacity, 100 kg/cm² delivery pressure (Vertex) The LA-2408 is a hand-operated grease pump designed for press-type lubrication tasks in workshops and maintenance applications, providing controlled high-pressure delivery for bearings and fittings. 800 c.c capacity for extended operation 100 kg/cm² delivery pressure Press-type operation for grease Compact 90 x 310 mm footprint Consistent high-pressure lubrication for dependable operation The LA-2408 manual grease pump is engineered to supply 100 kg/cm² delivery pressure, enabling forced grease flow into tight clearances and high-resistance fittings. High delivery pressure reduces the risk of under-lubrication in bearings and joints, which in turn helps to maintain rotational accuracy and prolong component life. The pump’s manual operation provides control over grease metering without reliance on external power, making it suitable for both stationary workshop benches and mobile maintenance teams. The design focuses on repeatable performance rather than luxury features, delivering measurable results where consistent lubrication is critical. Fewer refills and simpler workflow with 800 c.c capacity A notable benefit of the specification is the 800 c.c capacity, which extends intervals between refills and supports uninterrupted maintenance cycles during routine servicing. Larger capacity decreases handling time and the associated risk of contamination from frequent cartridge changes, which is particularly valuable in production environments where downtime is costly. The pump’s dimensional profile—90 x 310 mm—allows storage in standard tool cabinets or a service van tray while retaining easy access for rapid lubrication tasks. Together, capacity and compactness improve workflow efficiency and contribute to a predictable maintenance rhythm. Robust, straightforward operation for everyday maintenance As a press-type device for grease applications, the unit combines a straightforward actuation principle with a compact footprint that fits most workshop setups. The mechanical design emphasises reliability and ease of use: lubrication cycles are initiated by a deliberate press action that translates into a consistent grease pulse, aiding precise application to bearings, linkages and grease nipples. For technicians and maintenance planners, the pump represents a practical tool that supports preventive maintenance schedules and reduces the variability associated with manual greasing tasks. The Vertex brand and SKU LA-2408 identify a product line focused on practical maintenance solutions rather than optional extras. For supply and technical advice from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Vertex LA-2408 manual grease pump and its suitability for specific maintenance tasks Technical Data Article number: LA-2408 GTIN: 4061905092145 ECLASS: 23069090 Facts Capacity: 800 c.c Pressure: 100 kg/cm² Dimensions: 90 x 310 mm Special features Type: Press operation for grease Manufacturer: Vertex FAQ What maximum delivery pressure does the pump provide? The Vertex LA-2408 achieves a delivery pressure of 100 kg/cm², designed to force grease into tight fittings and bearing housings. What is the grease capacity and how does it affect maintenance intervals? The unit holds 800 c.c of grease, which extends the time between refills and reduces handling during regular servicing. Is the pump suitable for mobile service vans and bench use? Yes, the compact dimensions (90 x 310 mm) make the LA-2408 suitable for both bench-mounted and mobile maintenance environments. What type of operation does this pump use? The device is a press-type manual grease pump intended for controlled, mechanical actuation to deliver precise grease pulses. Which manufacturer produces this pump? The pump is produced by Vertex and sold under the SKU LA-2408 for industrial maintenance applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
800cc Hand Oil Pump 5 Kg/cm² Low-Pressure Lever-Actuated, 122x221mm - Vertex
Take advantage of a reliable manual lubrication solution with an 800 cc reservoir, 5 kg/cm² maximum pressure and metered delivery of 1–8 cc per stroke for consistent process results; order the unit directly via Metav Werkzeuge or contact our consultants for application advice. LA-8R Hand Lubricant Pump — 800 cc reservoir, 5 kg/cm² pressure (Vertex) The LA-8R is a hand-operated lubricant pump designed for controlled dosing in workshop and industrial maintenance environments, delivered as a press‑down unit with the lever mounted on the right side. 800 cc reservoir capacity 5 kg/cm² maximum pressure Dispenses 1–8 cc per stroke Press‑down actuation, right‑hand lever Consistent metering for dependable production routines The LA-8R provides precise dosing through an adjustable delivery range of 1–8 cc per stroke, enabling reliable lubrication cycles that reduce variance between operations. With a 800 cc reservoir the need for frequent refills is lowered, which helps maintain uninterrupted workflows in maintenance bays and workshop lines. The specified 5 kg/cm² maximum pressure ensures the pump can build sufficient force for common lubrication points while keeping operation safe and predictable. Technical terms: “per stroke” describes the volume released each time the lever is actuated, allowing planners to estimate lubricant consumption and service intervals. Ergonomic press‑down control that speeds routine tasks Designed for repetitive use, the press‑down mechanism with a right‑hand lever offers a compact solution that integrates smoothly into bench or trolley setups. The pump’s 122 × 221 mm footprint and 1.4 kg mass make it straightforward to position and relocate where needed, while the simple actuation reduces operator fatigue during prolonged use. The mechanical simplicity supports consistent cycle times and predictable dosing, which contributes directly to shop-floor efficiency and less downtime between lubrication points. Low-maintenance manual design for workshop reliability The straightforward mechanical construction of this hand lubricant pump minimises service complexity and supports long service intervals under normal workshop conditions. As a manual operation device, the pump avoids reliance on compressed air or electrical supply for basic dispensing tasks, offering resilience in varied environments. The robust, user‑centric layout is suited for routine maintenance and keeps spare parts and servicing requirements to a minimum, supporting steady throughput in repair and production settings. Source the Vertex LA-8R through Metav Werkzeuge in Emmerich for dependable manual lubrication supply and specialist advice on workshop integration Technical data Article number: LA-8R GTIN: 4061905090646 ECLASS: 23069090 Numbers / Core technical data Capacity: 800 cc Maximum pressure: 5 kg/cm² Delivery per stroke: 1–8 cc per stroke Dimensions: 122 × 221 mm Weight: 1.4 kg Special features Press‑down actuation, lever on right Hand‑operated lubricant pump SKU: LA-8R Brand: Vertex FAQ What volume does the pump hold? The pump has a reservoir capacity of 800 cc, which is suitable for extended intervals between refills in typical workshop use. How much lubricant is dispensed with each stroke? Delivery is adjustable between 1–8 cc per stroke, permitting controlled metering for various lubrication points. What pressure can the unit achieve? The device is rated to a maximum of 5 kg/cm², providing sufficient force for common manual lubrication tasks. Is the LA-8R suitable for bench and mobile use? Yes, the compact footprint (122 × 221 mm) and weight of 1.4 kg make the unit easy to position on benches or transfer between workstations. How is the pump actuated? The LA-8R uses a press‑down action with the lever mounted on the right side for ergonomic operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
800cc Hand Oil Pump, Lever-Action Press Type, 5 Kg/cm² Pressure - Vertex
Reliable lubrication performance with an 800 cc reservoir and a maximum discharge pressure of 5 kg/cm² reduces refill intervals and keeps machines running. The compact footprint of 122 x 221 mm combined with a 1.4 kg weight allows easy placement and transport in busy workshops — order the LA-8L directly via Metav Werkzeuge or ask our consultants if needed. LA-8L Hand lubricant pump by Vertex — 800 cc, 5 kg/cm² The LA-8L is a manual hand lubricant pump designed for workshop and maintenance lubrication tasks, featuring a push-down action with a left-hand lever for controlled delivery. 800 cc reservoir for extended operation 5 kg/cm² maximum discharge pressure Compact dimensions: 122 x 221 mm Lightweight 1.4 kg for easy handling Continuous lubrication with measurable performance The pump delivers a consistent discharge pressure of 5 kg/cm², providing a quantifiable output that supports planned lubrication intervals and reduces unexpected downtime. The 800 cc reservoir minimises refill frequency, which is particularly effective in production lines or maintenance bays where regular top-ups interrupt workflow. Specified dimensions and weight allow straightforward integration into workstations, while the measured pressure figure offers a clear basis for comparing lubrication tools and planning maintenance cycles. Ergonomic handling that improves routine work A push-down mechanism with a left-hand lever ensures controlled operation and safer handling during repetitive tasks. The compact size and 1.4 kg mass make the unit simple to position on benches or trolleys and easy to move between workstations. Operators benefit from a steady delivery rate and reduced physical strain, which streamlines routine servicing and supports efficient workshop processes without complex training or adjustments. Robust design with practical workshop benefits Constructed for everyday workshop use, the pump combines practicality with ease of maintenance. The straightforward design reduces potential failure points and allows quick cleaning or inspection between jobs. Measured technical values and a compact form factor make the pump a pragmatic choice for facilities aiming to standardise lubrication equipment across multiple benches while keeping spares and logistics manageable. Contact Metav Werkzeuge today for purchasing advice or to discuss how the LA-8L can fit specific maintenance workflows — Metav’s team in Emmerich provides a quality filter for reliable European supply. Technical Data Article number: LA-8L GTIN: 4061905092817 eClass: 23069090 Core data Capacity: 800 cc Discharge pressure: 5 kg/cm² Dimensions: 122 x 221 mm Weight: 1.4 kg Special features Type: push-down (left lever) Manufacturer: Vertex FAQ What is the reservoir capacity of the pump? The reservoir holds 800 cc, providing extended operation between refills for the LA-8L hand lubricant pump by Vertex. What discharge pressure can be expected from this unit? The unit delivers a maximum of 5 kg/cm², suitable for controlled lubrication tasks in workshop environments. Is the lever orientation interchangeable? This model features a push-down action with a left-hand lever as specified for the LA-8L; lever orientation is fixed for this SKU. How portable is the pump for use across multiple workstations? At 1.4 kg and compact dimensions (122 x 221 mm), the pump is lightweight and easy to move between benches or trolleys. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
800cc Hand Press Oil Pump 60 Kg/cm² Niederdrücken For Machine Oil - Vertex
Take advantage of a compact, high-pressure solution that combines a generous 800 cc reservoir and a press-down mechanism for reliable machine-oil delivery; a robust, space-saving tool that keeps maintenance intervals predictable. Order the pump directly via Metav Werkzeuge or consult our specialists for tailored supply from the European warehouse. Vertex LA-1408 Manual Lubrication Pump — 800 cc, 60 kg/cm² press-down type LA-1408 is a hand-operated lubrication pump engineered for dispensing machine oil in workshops and industrial maintenance environments 800 cc reservoir capacity Press-down operation for machine oil 60 kg/cm² maximum pressure Compact 90 x 310 mm footprint Prolonged machine life through controlled lubrication The combination of an 800 cc reservoir and a 60 kg/cm² maximum pressure provides consistent, deep-reaching lubrication for bearings and drive components. The press-down mechanism delivers precise metering, minimising over-application and reducing lubricant waste. This controlled delivery supports longer service intervals and more predictable maintenance scheduling, translating technical capacity into measurable uptime improvements for production lines and workshop machinery. Compact form factor that suits tight workspaces Designed with a compact 90 x 310 mm footprint, this hand-operated lubrication pump fits neatly on tool trolleys or maintenance benches where space is limited. The compact dimensions, coupled with a straightforward press-down action, enable quick positioning and operation without complex setup. The slim profile and robust construction make it practical for benchtop use and for servicing confined assemblies where a powered lubrication system would be impractical. Simple handling and maintenance for dependable performance The press-down design offers a direct mechanical action that is easy to service and unlikely to suffer from electrical faults—an advantage in busy industrial environments. Refilling the reservoir is straightforward, and the reliable dispensing mechanism reduces downtime associated with blocked lines or inconsistent flow. The manual nature of the pump ensures operation even where no compressed air or electricity is available, providing a dependable, low-maintenance lubrication method for routine servicing tasks. Contact Metav Werkzeuge in Emmerich for expert advice and supply of the Vertex LA-1408 — email info@metav-werkzeuge.com or call +49 2822 7131930 for delivery from our European warehouse Technical Data Article number / SKU: LA-1408 GTIN: 4061905093029 ECLASS: 23069090 Designation: Hand lubricant pump Manufacturer: Vertex Type: Press-down (for machine oil) Dimensions: 90 x 310 mm Capacity: 800 cc Pressure: 60 kg/cm² Numbers / Core technical data Capacity: 800 cc Maximum pressure: 60 kg/cm² Dimensions: 90 x 310 mm GTIN number: 4061905093029 Special features / Versions Hand-operated press-down mechanism Intended for machine oil application Compact, workshop-friendly design Manufacturer: Vertex FAQ Is the pump suitable for all common machine oils? The LA-1408 manual lubrication pump is designed for standard machine oils; viscosity extremes should be checked before use to ensure compatibility with the press-down mechanism. How often does the 800 cc reservoir need refilling in daily maintenance use? Refill intervals depend on application and usage frequency; the 800 cc capacity of the LA-1408 typically supports multiple small service tasks before replenishment is required. Can the pump achieve lubrication points under slight backpressure? With a maximum rating of 60 kg/cm², the pump is capable of overcoming moderate backpressure encountered in bearing and fitting lubrication points. Is specialised training required to operate the pump? Operation of this hand-operated pump is straightforward; basic familiarisation with press-down dispensing is sufficient for routine maintenance personnel. Are replacement parts or seals available for the Vertex LA-1408? Replacement seals and service parts are available for the Vertex LA-1408; refer to the manufacturer documentation for part numbers and maintenance intervals. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
800mm Independent Four-Jaw Chuck, 200 r.p.m., 8-M20 T-Slots - Vertex
Take advantage of a combination of large-capacity clamping, stable rotational performance and straightforward mounting for consistent workshop results; order the VKC-32 through Metav Werkzeuge or consult our specialists for tailored integration. VKC-32 Independent four-jaw chuck, Ø 800 mm — Vertex A VKC-32 independent four-jaw chuck engineered for heavy‑duty lathe work and precise workholding across large components. Independent four-jaw clamping system Large Ø 800 mm clamping diameter 200 rpm maximum rotational speed Robust construction, weight 265 kg High-capacity clamping for large components The Ø 800 mm clamping diameter provides capacity for substantial workpieces while the independent jaws permit individual adjustment for irregular shapes and offset turning. This flexibility translates into reliable datum setting and reduced setup time when fitting castings or asymmetrical parts. The design brings a balance of accessibility and control, supporting production processes that demand both capacity and repeatable alignment. Stable rotation for heavy machining tasks With a rated 200 rpm maximum and an overall mass of 265 kg, the chuck offers enhanced stability during low‑to‑medium speed operations typical of heavy turning and facing. The substantial mass reduces vibration and improves surface finish when machining large diameters, while the conservative speed rating aligns with safety and longevity in demanding industrial environments. This combination supports consistent part quality and lower tool wear over extended runs. Flexible mounting adapted to workshop fixtures Mounting is facilitated by T-slots configured for M20 fastenings, enabling secure installation on a variety of spindle adaptors and faceplate arrangements. The provision for multiple fastening points ensures even load distribution and simple integration with existing lathe tooling. Clear mechanical interfaces reduce the need for bespoke adapters and help maintain concentricity when repeating setups across medium‑ to large‑batch production. Durable design built for industrial workflows Constructed for repetitive, heavy‑use scenarios, the chuck emphasises robust materials and serviceability to meet shopfloor expectations. The independent clamping principle provides controlled force application to each jaw, supporting delicate adjustment without compromising grip. Backed by Vertex engineering, the solution aligns with precision workflows and contributes to predictable throughput in component turning and repair shops. For reliable heavy‑duty workholding with traceable quality, order the Vertex VKC-32 through Metav Werkzeuge — our Emmerich team will advise on integration and delivery options. Technical Data Article number: VKC-32 GTIN: 4061905085949 Name: Four-jaw chuck, independent Facts Clamping diameter: 800 mm Maximum speed: 200 rpm Weight: 265 kg Special features T-slots: 8-M20 Operation: independent jaws Manufacturer: Vertex ECLASS: 21020490 FAQ What types of workpieces suit this chuck? The VKC-32 independent four-jaw chuck is suitable for large, irregular and asymmetrical workpieces where individual jaw adjustment is required; it performs well on heavy turning tasks. Can the chuck be used at high spindle speeds? The chuck is rated to 200 rpm; this specification for the VKC-32 aligns with heavy‑duty turning and is chosen to optimise stability and tool life. How is the chuck mounted to the lathe? Mounting uses T-slots prepared for M20 fastenings, allowing the VKC-32 to be secured to compatible spindle adaptors or faceplates with even load distribution. Does the independent jaw design improve accuracy? Yes; independent jaws permit precise jaw-by-jaw adjustments so the chuck can be centred to non‑cylindrical parts, improving alignment and reducing rework on large components. Who manufactures this chuck? The chuck is manufactured by Vertex and supplied to European customers through Metav Werkzeuge, offering industrial reliability for workshop applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
800N Push Rod Clamp Horizontal Base Zinc-Plated, 970N Holding Force - Kukamet
Take advantage of a compact, high‑force clamp that combines secure holding, corrosion‑resistant finish and simple adjustment for repetitive fixture work; order directly via Metav Werkzeuge or consult our specialists for integration advice. Pushrod clamp 511 by Kukamet — horizontal foot, 800 N clamping force The Pushrod clamp 511 is a horizontal‑foot lever clamp designed for fixture and jig applications, offering reliable repeatable clamping with an adjustable M5x35 pressure spindle. Horizontal foot mounting for stable installation Zinc‑plated finish for corrosion resistance Up to 800 N clamping force M5x35 adjustable pressure spindle Secure clamping that boosts process reliability The compact unit delivers a clamping force of 800 N with a holding force of 970 N, providing consistent pressure for small to medium assembly and fixturing tasks. Its low mass (0.135 kg) makes it suitable where low inertia is required, while the robust force figures ensure components remain stationary during machining, inspection or assembly. Clear numerical ratings enable engineering planners to compare performance and to calculate safety margins for repeated production cycles. Fast mounting and tool‑room friendly adjustment Featuring a horizontal foot for secure attachment, the clamp integrates easily into existing fixtures and jig plates. The M5x35 pressure spindle (metric thread M5, 35 mm length) allows fine adjustment of contact point and clamping travel, enabling precise set‑up without additional parts. The simple mechanical interface reduces set‑up time and supports frequent changeovers, which is particularly advantageous in small batch runs or mixed production environments. Corrosion protection for long service life A zinc‑plated finish provides corrosion resistance suitable for workshop atmospheres and environments where occasional coolant or humidity exposure occurs. The surface treatment lowers the need for frequent replacement and keeps maintenance requirements to a minimum, contributing to dependable uptime and reduced lifecycle costs. The straightforward design means servicing is limited to routine inspection and occasional lubrication of the spindle thread. Compact solution for fixtures and production jigs Engineered for use in clamping applications, this lever‑style pushrod clamp is ideal for assembly benches, holding devices and portable jigs where space and repeatability are priorities. The combination of a low profile mounting foot, adjustable spindle and defined force ratings supports modular fixture design and predictable part handling. Integrators benefit from a component that is easy to specify, fits standard metric hardware and helps maintain consistent production quality. Contact Metav Werkzeuge to discuss how the Kukamet pushrod clamp 511 can be specified for fixtures and jigs, and to receive tailored advice from our Emmerich‑based team Technical data Article number: 511-1 GTIN: 8680731502602 Manufacturer: Kukamet SKU: 511-1 Core measurements Clamping force (max): 800 N Holding force (max): 970 N Weight: 0.135 kg Pressure spindle: M5x35 Materials & features Material: zinc‑plated Mounting type: horizontal foot Special features: none FAQ What clamping and holding forces does this clamp provide? The pushrod clamp 511 offers a maximum clamping force of 800 N and a holding force of 970 N, providing defined values for fixture design and safety calculations. How is the pressure point adjusted on this clamp? Adjustment is via the M5x35 pressure spindle; the thread size (M5) and 35 mm length permit fine setting of the contact point without additional components. Which mounting option is required for installation? The unit is supplied for horizontal foot mounting, allowing stable fixation to jig plates or fixture bases in a low‑profile arrangement. Is the clamp suitable for workshop environments with occasional moisture? Yes, the zinc‑plated finish offers corrosion resistance for typical workshop atmospheres, reducing maintenance and extending service life. Can the component be used in small batch or reconfigurable fixtures? Designed for repeatable clamping and easy integration, the pushrod clamp 511 is well suited to modular jigs, changeover fixtures and small‑batch production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800N Push Rod Clamp Horizontal Foot, 970N Holding Force, Black Oxide - Kukamet
Take advantage of a compact clamping solution that combines high holding capability with precise actuation: sturdy 970 N holding force, reliable 800 N maximum thrust and a space-saving horizontal foot for straightforward integration. Order directly through Metav Werkzeuge or consult our specialists for specification support and dependable European supply. Kukamet 511 Push-rod Clamp — 800 N thrust, horizontal foot A Kukamet 511 push-rod clamp designed for fixture and jig applications where compact, repeatable clamping and reliable holding are required. 800 N maximum thrust 970 N holding force Horizontal foot mounting Compact, blackened finish Robust clamping performance for reliable fixtures The compact push-rod clamp delivers dependable force where consistent workholding is essential. With a rated 800 N maximum thrust and 970 N holding force, the device secures components with minimal movement during machining or assembly, improving process stability. The blackened finish protects surfaces and reduces glare at the workstation. Built-in simplicity reduces potential failure points while maintaining the performance expected in professional workshop environments. Easy integration and precise adjustment Equipped with an M5x35 pressure spindle, the clamp allows fine adjustment of contact pressure and stroke end position, supporting precise seating without complex setup. The horizontal foot mounting facilitates low-profile installation on jigs and fixtures, saving vertical space on the workbench. Weighing just 0.135 kg, the unit contributes negligible mass to the assembly, aiding balance on lightweight tooling and reducing inertia during rapid positioning. Practical benefits for production workflows The small footprint and straightforward design of this clamp enable rapid fixture assembly and repeatable results across batches. Robust mechanical characteristics support applications where consistent clamping is required but extensive adaptation is not practical. Supplied by Kukamet and distributed via Metav Werkzeuge, the product benefits from quality filtering and dependable stock handling in Emmerich, ensuring continuity of supply for industrial users and specialist workshops. Choose the Kukamet 511 for robust 800 N thrust and 970 N holding force — contact Metav Werkzeuge for tailored procurement and reliable delivery from Emmerich Technical data SKU: B511-1 GTIN: 8680731503852 EClass: 21041716 ETIM: EC011973 Facts Maximum thrust: 800 N Holding force (max): 970 N Weight: 0.135 kg Pressure spindle: M5 x 35 Special features Mounting: horizontal foot Finish: blackened (blued) Product category: Clamp (Spanner) FAQ What is the main clamping capacity of this unit? The Kukamet 511 push-rod clamp provides a maximum thrust of 800 N and a holding force of 970 N, offering reliable fixture clamping for small to medium applications. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the Kukamet 511 is designed for low-profile installation on jigs and fixtures to conserve vertical space. Can the contact pressure be adjusted? Yes, the clamp uses an M5x35 pressure spindle for fine adjustment of contact pressure and end position to suit specific workpieces. Is the clamp suitable for lightweight tooling setups? With a weight of 0.135 kg the Kukamet 511 is lightweight and well suited for integration into delicate or compact tooling assemblies. Where is supply and distribution handled? Distribution and stock handling for the Kukamet 511 is managed via Metav Werkzeuge in Emmerich, ensuring consistent European supply. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800N Push Rod Clamp Vertical Base, 970N Holding Force, Blackened Finish 0.135kg - Kukamet
Take advantage of the combination of secure holding force, compact design and a durable black‑blued finish for reliable clamping in confined fixtures. Order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. Push-rod Clamp 512 by Kukamet — vertical-foot clamp with M5x35 pressure spindle The Push-rod Clamp 512 is a compact vertical-foot clamping device designed for light‑duty fixtures and assembly jigs, providing repeatable holding performance where space is limited. Vertical-foot mounting for space-saving set-up High holding force: 970 N for secure clamping 800 N clamping thrust for repeatable action Black blued finish resists wear and glare Secure, measurable clamping for consistent results The clamp delivers a clearly defined holding force of 970 N and a clamping thrust of 800 N, values that translate directly into dependable fixture performance. Such numerical ratings support predictable process planning: the specified forces enable the selection of suitable workpiece supports and mating hardware, reducing rework and downtime. The pressure spindle (M5x35) allows fine contact adjustment, so the actuator achieves firm engagement without excessive preload. For operations that demand repeatability rather than brute force, this balance of thrust and hold ensures consistent part positioning across cycles. Space-saving installation and robust finish for workshop use At just 0.135 kg, the unit is lightweight enough to integrate into compact assemblies while the vertical-foot mounting minimises the required footprint on trolleys or small tooling plates. The black blued surface offers basic corrosion protection and a low-reflective appearance that helps avoid glare under strong workshop lighting. The simple geometry and modest mass reduce inertia in automated or manually actuated setups, which is advantageous where quick, frequent clamping actions are needed. Installation is straightforward thanks to the dedicated foot mounting and standard spindle thread. Low-maintenance actuation with practical application scope The mechanical design focuses on straightforward function: a push-rod mechanism with an M5x35 contact spindle gives tactile adjustment and quick replacement if required. The finish and materials support routine workshop environments without specialised upkeep; occasional lubrication of the spindle and a visual check of the mounting suffice for normal service intervals. The device is intended for light to medium fixture tasks in metalworking and assembly contexts, offering a pragmatic solution when compact, reliable clamping is a priority rather than heavy-duty harvesting of holding forces. For secure, compact clamping solutions, contact Metav Werkzeuge for ordering and tailored advice on the Kukamet Push-rod Clamp 512 — reliable guidance from Emmerich for immediate integration into your fixtures Technical data SKU: B512-1 GTIN: 8680731508697 Model designation: 512 Manufacturer: Kukamet Facts Clamping thrust: 800 N Holding force: 970 N Weight: 0.135 kg Pressure spindle: M5x35 Mounting type: vertical foot Surface finish: black blued eClass: 21041716 ETIM: EC011973 Special features Compact push‑rod clamping mechanism Low mass for tight installations Durable black‑blued surface Suitable for light‑duty fixture and jig applications Category: Spanner FAQ What clamping and holding forces does the clamp provide? The Kukamet Push-rod Clamp 512 specifies a clamping thrust of 800 N and a holding force of 970 N, enabling predictable fixture performance for repeatable operations. How is the clamp mounted in a fixture? Mounting is by a vertical foot; the vertical‑foot arrangement of the clamp simplifies installation on narrow plates and tight jig layouts. What contact spindle is fitted and can it be adjusted? The device uses an M5x35 pressure spindle, which permits fine adjustment of contact pressure and straightforward replacement if necessary. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
800N Push-Pull Hand Clamp, M5x35 Actuating Spindle, 970N Holding Force, Blackened Finish - Kukamet
Take advantage of a compact, low-mass clamp that delivers 800 N pressing force and 970 N holding force for reliable part retention; the simple M5x35 pressure spindle and black oxide finish keep maintenance low and integration straightforward. Order directly via Metav Werkzeuge or consult our team for application advice. Push-rod clamp 513 — Kukamet compact clamp with 800 N pressing force The Push-rod clamp 513 is a compact mechanical clamp designed for secure workholding in light-duty fixtures and jigs, offering a robust holding capacity in a small footprint. Compact push-rod clamp for light fixtures 800 N maximum pressing force 970 N holding force for reliable retention Black oxide finish for corrosion resistance Secure retention for light fixtures and jigs The rod-style clamping mechanism provides a measurable retention effect that is well suited to assembly fixtures, inspection jigs and small machining setups. With a rated holding force of 970 N and a separate pressing force of 800 N, the device delivers consistent clamping performance that reduces part movement during operation. This stability translates into fewer rejects and less rework, supporting a more economical production flow without needing heavy-duty equipment. Precise actuation and compact installation Actuation is achieved via the integrated pressure spindle in size M5x35, which enables fine adjustment and secure locking. The compact design, with a mass of 0.095 kg, allows for installation in confined spaces and makes the component particularly suitable where several clamps must be arranged densely. Because the unit is supplied without a mounting foot, it can be built directly into bespoke fixture plates or modular tooling systems, permitting tailored placement and improved accessibility in complex assemblies. Robust surface treatment for workshop use A black oxide finish provides a protective layer that reduces visible wear and offers moderate corrosion resistance in typical workshop atmospheres. This surface treatment helps to preserve functional surfaces and maintains the clamp’s reliable operation over repeated cycles. The finish also minimises reflective surfaces, which is advantageous in inspection areas and optical setups where glare is a concern. Straightforward integration and dependable supply The mechanical simplicity of the clamp minimises service needs: routine checks and occasional spindle lubrication suffice to maintain performance. The compact architecture and standard spindle thread make retrofitting into existing fixtures practical and time-efficient. Backing this hardware is Metav Werkzeuge’s distribution and quality-control presence in Emmerich, ensuring consistent supply and a traceable quality filter for European workshops and small-scale production environments. Contact Metav Werkzeuge for application support on the Kukamet push-rod clamp 513 — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability for specific fixtures or to request order information. Technical data SKU: B513-1 GTIN: 8680731508741 Manufacturer: Kukamet Weight: 0.095 kg Maximum pressing force: 800 N Maximum holding force: 970 N Pressure spindle: M5x35 Facts Category: Clamp Mounting: without base Finish: black oxide finish Special features Compact design for dense fixture layouts Low mass for minimal load on substructures Suited for light-duty workholding and jigs FAQ What materials is the clamp suited for? The clamp 513 is intended for light-duty workholding and can be used with a wide range of workpiece materials in fixture and jig applications, depending on the specific process and fixturing strategy. How is the clamp adjusted? Adjustment is performed with the integrated M5x35 pressure spindle; the spindle allows fine setting of clamping travel and pressure to match the application. Can the clamp be mounted directly to a fixture plate? Yes, the unit is supplied without a mounting foot so it can be integrated directly into fixture plates or modular tooling systems. Is the surface treatment corrosion resistant? The black oxide finish provides moderate corrosion protection appropriate for typical workshop environments and helps reduce surface reflections. Which SKU should be ordered for this model? Order SKU B513-1 for the Kukamet push-rod clamp 513; reference GTIN 8680731508741 for logistics. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com