Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
800x280 Cross Slide Table Precision Cross Table, 144mm Height - SAIM
Benefit from a stable 800 x 280 mm platform, a low 144 mm profile and a substantial mass of 93 kg for reliable positional stability; order the SAIM-800XY directly via Metav Werkzeuge or consult our advisors for tailored guidance. SAIM-800XY — XY cross table with 800 x 280 mm platform The SAIM-800XY is a compact XY cross table designed for precise positioning in machining, inspection and assembly tasks. Large 800 x 280 mm travel area Low profile 144 mm for tight setups Heavy 93 kg mass for reduced vibration Stable, compact base for repeatable positioning The cross slide is built around a generous 800 x 280 mm platform and a low 144 mm overall height, which together provide a compact footprint while maintaining a stable working surface. The substantial mass of 93 kg dampens vibrations and supports repeatable results on milling machines, drill presses or inspection benches. For workshops and light production, this combination of scale and solidity reduces micro-movements during cutting or measurement operations, improving process consistency without requiring additional fixture mass. Smooth XY handling that shortens setup time Manual longitudinal and transverse adjustments on the table enable controlled incremental movement and fast coarse positioning. The design supports precise incremental shifts for alignment and repeat operations, translating into fewer tool changes and less time lost to re-clamping. Where accurate relative movement is required between operations, the XY slide ensures predictable motion; this simplifies workflow planning and contributes to measurable gains in productivity on small to medium batch runs. Easy integration and professional documentation The low-profile frame and standard mounting pattern make the unit straightforward to install on conventional machine tables or measurement platforms; no bespoke alterations are necessary in most cases. Technical drawings and gallery images are provided for planning and fixture layout, supporting rapid integration into existing setups. The robust construction also reduces the frequency of alignment checks, helping to maintain uptime and protect downstream processes from position-related rework. For secure, precision positioning in workshop and light production environments, request a technical quote for the SAIM-800XY from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery options. Technical data Article number: SAIM-800XY GTIN: 4061905082429 eClass: 21041714 Label: Kreuztisch Manufacturer: SAIM Dimensions & weight Top platform: 800 x 280 mm Height: 144 mm Weight: 93 kg Versions & features Type: XY cross table Model designation: SAIM-800XY Gallery images and technical drawing available FAQ What are the travel dimensions of the table? The SAIM-800XY provides a travel area of 800 x 280 mm, suitable for medium-format fixtures and workpieces. Is the table suitable for use on a milling machine? Yes, the cross table is designed for machining and inspection environments and mounts easily on standard machine tables. How does the mass affect performance? The 93 kg mass of the SAIM-800XY increases stability and vibration damping, which improves repeatability during cutting and measuring operations. Are technical drawings available for planning? Technical drawings and gallery images are provided to assist with fixture design and integration for the SAIM-800XY. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x280 Cross Table Precision Movement, 115.5mm Height - SAIM
Take advantage of a stable, compact positioning solution that combines a large 800 x 280 mm working surface with a solid 75 kg construction for improved vibration damping and repeatable alignment; order directly via Metav Werkzeuge or consult their specialists for integration support. SAIM-800X Cross Slide Table — 800 x 280 mm working surface, 75 kg mass The SAIM-800X is a robust cross slide table designed for precise positioning tasks in machine-shop and inspection environments, offering a compact footprint and stable support for medium-sized workpieces. 800 x 280 mm working surface 75 kg solid base 115.5 mm overall height Precise positioning through mass and surface area A heavy base is a decisive advantage when repeatability matters: the 75 kg mass significantly reduces vibration during machining and measurement, which improves positional accuracy and surface finish. The 800 x 280 mm working surface provides sufficient room for fixturing medium workpieces or tooling, enabling secure clamping without excessive overhang. By combining mass with a well-proportioned top, the unit supports consistent results across repeated cycles — an important factor for production runs and quality-controlled inspection procedures. Reference drawings in the gallery support exact mounting planning. Low profile for straightforward integration into setups A compact overall height of 115.5 mm gives the table a low profile that simplifies integration into milling, drilling or inspection stations without major modification to fixtures. The modest vertical dimension helps keep the clamping centre close to the machine spindle axis or measuring plane, reducing lever forces and improving stability. The available technical drawing and product images support planning for mounting points and alignments, so customers can assess fitment before installation and reduce setup time on the shop floor. Designed for workshop and production use Classified under eClass 21041714, this cross slide table is intended for positioning and machining tasks common in industrial workshops. The construction and weight promote damping and stable form-holding during light to medium machining or measurement processes. The design is straightforward, lending itself to use as a dedicated fixture plate, a component of a measuring station, or an auxiliary table on drilling and milling stands. The compact footprint and robust build together support reliability in daily production use, increasing machine uptime and consistency. Contact Metav Werkzeuge for tailored advice on integrating the SAIM-800X into existing production lines — technical drawings and delivery from Emmerich are available; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SAIM-800X GTIN: 4061905082412 Product: Cross slide table Manufacturer: SAIM Facts Table top: 800 x 280 mm Weight: 75 kg Height: 115.5 mm eClass: 21041714 Features & resources Heavy mass for improved damping Compact, low-profile design Technical drawing and gallery available Suitable for positioning, fixturing and inspection setups FAQ What size of workpiece fits comfortably on this table? The SAIM-800X cross slide table (SKU SAIM-800X) has an 800 x 280 mm working surface, which accommodates medium-sized components and offers room for standard fixturing and clamps. Is the table suitable for use with a milling machine for light machining? Yes, the table’s solid construction and 75 kg mass provide enhanced damping and stability suitable for light to medium machining tasks and positioning duties. Are technical drawings available to plan installation? Technical drawings and gallery images are provided for the SAIM-800X to assist with precise mounting and integration into existing setups. What classification or standard identifies the product type? This unit is listed under eClass 21041714, identifying it as a positioning/slide table suitable for workshop and production use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x280 Cross Table Precision Positioning Stage, 173mm Height - SAIM
Take advantage of the 800 x 280 mm work platform and the 108 kg mass for enhanced stability and precise X–Y positioning; the low-profile 173 mm stage reduces vertical build while delivering a steady work surface for machining tasks. Order the SAIM-800XYG cross table directly via Metav Werkzeuge or ask our consultants if needed. SAIM-800XYG cross table — precision X–Y stage with 800 x 280 mm platform SAIM-800XYG is a compact, heavy-duty cross table designed to provide accurate X–Y movement for machine-shop and tooling applications, offering a broad work surface within a reduced vertical envelope. 800 x 280 mm work platform Robust 108 kg construction Low 173 mm profile for tight setups Increased stability for consistent machining results A heavier stage mass improves damping of cutting forces and vibration; the 108 kg construction of this cross table provides a stable base that reduces chatter and helps maintain surface finish quality. The 800 x 280 mm platform gives ample room for medium-sized fixtures and components, allowing clamping solutions to be placed without compromising access. Stability is a direct contributor to reproducible outcomes, making the stage suitable where repeatable positioning and finish are priorities. Clear, measurable stability reduces scrap rates and supports efficient production planning. Compact design that simplifies integration The low profile of just 173 mm minimises the required vertical clearance, which is particularly useful when retrofitting into existing milling or inspection setups. A compact stage profile permits closer tool approaches and can simplify chip evacuation and guarding arrangements. Because the unit is presented as a standalone X–Y stage, integration into workbenches, rotary tables or fixture systems can be planned without extensive machine modification. For customers requiring precise dimensional matching, Metav Werkzeuge offers consultation to verify compatibility with intended machines and fixtures. Precise X–Y positioning to speed up workflows Engineered as a cross table for exact lateral movement, this stage focuses on delivering reliable positional control for machining, drilling and inspection tasks. Fine adjustment reduces the need for repeated clamping and rework, increasing throughput in jigs and small-batch production. The combination of a generous work surface and a substantial mass supports both positional stability and handling of varied workpiece geometries. For workshop managers, the outcome is a tangible improvement in setup efficiency and a reduction in cycle variation across serial tasks. Contact Metav Werkzeuge for advice on integrating the SAIM-800XYG into current machinery or to request detailed drawings and delivery options; Metav Werkzeuge can support specification checks from Emmerich with direct phone and email assistance. Technical data Article number: SAIM-800XYG GTIN: 4061905082443 eClass: 21041714 Facts Platform dimensions: 800 x 280 mm Weight: 108 kg Height: 173 mm Special features Product type: Kreuztisch / cross table Manufacturer: SAIM Suitable for machine-shop positioning and workholding FAQ What are the primary dimensions of the stage and how much mass does it offer? The SAIM-800XYG features an 800 x 280 mm work platform and a mass of 108 kg, providing a broad, stable surface for fixtures and components. Is the cross table suitable for retrofitting into existing milling machines? Yes. The low 173 mm profile is intended to ease integration into many machine and fixture configurations; Metav Werkzeuge can assist with compatibility checks. For which workshop tasks is this cross table best suited? The stage is aimed at precision X–Y positioning tasks such as milling, drilling and inspection where stability and repeatable lateral movement are required; it supports medium-sized workpieces on its 800 x 280 mm platform. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x280 Cross Table Precision Stage, Height 114.5mm - SAIM
Combining a robust 80 kg construction with a compact 800 x 280 mm platform and a low-profile 114.5 mm height, the SAIM-800XG delivers stable, repeatable positioning for machine-tool and workshop applications. Order the cross table directly via Metav Werkzeuge or consult our specialists for integration and delivery guidance. SAIM-800XG cross table — 800 x 280 mm platform, 114.5 mm height The SAIM-800XG is a compact cross table engineered for precise XY positioning in workshop and machine-tool environments. Robust 80 kg construction Platform 800 x 280 mm travel Low-profile 114.5 mm height Ideal for machine-tool positioning Stable positioning that improves process reliability The compact cross table provides a mechanically stable base for precise part positioning. Its platform dimensions of 800 x 280 mm allow secure clamping of components while the substantial 80 kg mass reduces sensitivity to external vibration. In practical terms, a heavier stage translates into fewer micro-movements during machining and measurement, which supports consistent repeatability in serial operations. The construction is intended to integrate with standard machine tables and fixturing systems, enabling improved throughput without complex auxiliary supports. Compact design for easy integration and efficient workflows A low-profile 114.5 mm height keeps the working envelope minimal, facilitating integration under toolheads and within measurement setups where vertical space is restricted. The reduced overall height helps maintain a short tool overhang and optimised centre-of-gravity for mounted parts, which can contribute to smoother axis motion in production flows. The cross-slide concept (an XY stage) concentrates travel where it is needed, making it particularly suitable for retrofits, assembly jigs and small-batch production where floor space and machine compatibility matter. Clear documentation and application-ready details Technical drawings and gallery images are supplied to support planning and machine integration. The presence of a detailed technical drawing allows planners to check mounting interfaces and clearances before installation, reducing lead times and installation uncertainties. The SAIM-800XG is presented as an industrial-grade positioning solution with emphasis on precision, stability and straightforward adaptation to workshop and manufacturing environments. Specification-based decision-making is supported by the available product documentation and numerical data. For specification checks, delivery timing or integration advice, contact Metav Werkzeuge's technical team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss how this cross table fits existing equipment and workflows. Technical data Article number: SAIM-800XG GTIN: 4061905082436 Facts Platform dimensions: 800 x 280 mm Height: 114.5 mm Weight: 80 kg eClass: 21041714 Special features Cross table / XY stage design Suitable for machine tool positioning Technical drawing and gallery images available FAQ What are the main dimensions of the stage? The platform measures 800 x 280 mm, with an overall height of 114.5 mm, making it suitable for compact integration into machine tables. How much does the unit weigh and why does that matter? The stage weighs 80 kg; the mass contributes to vibration damping and improved positional stability during machining and measurement. Is the SAIM-800XG suitable for machine-tool retrofits? Yes, the SAIM-800XG cross table is designed for integration with machine tools and workshop fixtures, supported by technical drawings for mounting checks. What documentation is available to support installation? A detailed technical drawing and gallery images are provided to verify mounting clearances and plan fixture attachment for the SAIM-800XG. Which applications are best suited to this cross table? The stage is suited to precision positioning tasks such as small-part machining, measurement setups and assembly fixtures where a compact, stable XY solution is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x800mm Angle Plate 90° With T-Slots M12, 800x550mm Foot, 577 kg - Vertex
Take advantage of the 90° T-slot configuration and the large 800×800 mm measuring surface to secure heavy, vibration-sensitive workpieces with confidence; for reliable supply and tailored delivery, order via Metav Werkzeuge or consult our product specialists. BP22-80 angle plate — 90° clamping plate with M12 T-slots, large 800×800 mm table (Vertex) The BP22-80 angle plate provides a rigid 90° reference plane for fixturing and inspection in industrial workshops and metrology setups, designed for stable positioning and repeatable alignment. 90° precision angle plate with M12 T-slots Measuring table 800×800 mm Stable base 800×550 mm footprint Substantial mass 577 kg for vibration damping Stable reference for repeatable setups and quicker throughput The heavy-duty construction creates a stable reference plane that reduces setup variability and shortens inspection cycles. The significant mass of 577 kg increases inertial damping, which stabilises mounted parts during measurement or machining, translating into fewer re-clamps and higher process throughput. The M12 T-slots permit modular fixturing with standard clamping hardware, enabling efficient transitions between jobs while maintaining positional accuracy. Large working surface that integrates into existing workflows A broad 800×800 mm table surface provides ample room for common components and assemblies, while the 800×550 mm base footprint ensures a manageable mounting area on workshop tables or measuring stands. The deep T-slots accept commonly used M12 fixtures and locating elements, which simplifies integration with existing tooling and reduces the need for custom adapters. This results in shorter lead times from setup to measurement and a smoother production flow. Robust design that supports precision and long-term reliability Precision-ground faces deliver the orthogonal relationship necessary for repeatable measurements and machining references. The T-slot arrangement, coupled with the plate's mass, improves resistance to external vibration and handling disturbances—an advantage when consistent geometry control is required. Manufactured under the Vertex name, the component is built for continuous industrial use, offering a predictable lifecycle that supports planning and maintenance schedules. Practical benefits for inspection and clamping applications By combining a true 90° datum with standard M12 clamping compatibility and a substantial working area, this fixture reduces the number of bespoke setups and potential alignment errors. The result is improved process reliability and measurable time savings during inspection and production runs. For workshops seeking a durable, low-maintenance fixturing solution, this component delivers clear operational gains without complex adaptation. Choose the Vertex BP22-80 for robust, repeatable fixturing and contact Metav Werkzeuge in Emmerich for delivery coordination and tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BP22-80 GTIN: 4061905085963 eClass: 21020601 Facts Measuring table: 800×800 mm Base footprint: 800×550 mm Weight: 577 kg T-slot size: M12 Special features 90° clamping angle with T-slots Designed for fixturing and inspection tasks Standard M12 bolt compatibility Brand: Vertex FAQ What are the main dimensions and mass of the BP22-80? The BP22-80 angle plate has a measuring surface of 800×800 mm, a base footprint of 800×550 mm and a mass of 577 kg. Which clamping hardware is compatible with the T-slots? M12 bolts and standard M12 clamping elements are compatible with the BP22-80's M12 T-slots, enabling the use of common clamping kits and locating parts. Is the BP22-80 suitable for precision inspection tasks? Yes; the 90° reference faces and stable mass of the BP22-80 make it suitable as a datum for inspection and alignment where repeatability is essential. How does the plate's weight affect measurements? The substantial weight of 577 kg increases vibration damping and stabilises mounted workpieces, which improves measurement consistency and reduces the risk of movement during inspection. Can the angle plate be integrated into existing workshop setups? The plate's standard M12 T-slots and defined footprint allow straightforward integration with common workshop tables and modular fixturing systems, reducing the need for custom adapters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
80mm 18mm T-Slot Screw M16 Grade 8.8 With Nut And Washer, DIN 787 - AMF
Robust fastening for fixture tables: the T-slot bolt DIN 787 combines standard-compliant design and a metric M16 thread with an 80 mm length for secure clamping, supplied complete with nut and washer; order directly via Metav Werkzeuge or consult the technical advisors for specification support. AMF T-slot bolt DIN 787 — 18 mm T-slot, M16 × 80 mm AMF T-slot bolt DIN 787 for machine tables and fixture systems, designed to secure workpieces and tooling in 18 mm T-slots. DIN 787 standardised design Suitable for 18 mm T-slot rails Metric M16 thread for strong clamping Supplied with nut and washer Secure clamping that fits standard fixtures The T-slot bolt is produced to DIN 787 dimensions and is intended for industrial and workshop fixture systems where repeatable positioning is required. The combination of an M16 thread and an 80 mm overall length provides a reliable grip through standard clamping plates and fixtures; this ensures consistently low setup times and stable fixation during machining or assembly, improving cycle-time efficiency. Compatibility with 18 mm T-slot rails reduces the need for custom adapters and supports quick integration into existing systems. High-strength performance for demanding applications Manufactured for strength and operational reliability, the fastener is specified as grade 8.8 in the product label, indicating a hardened steel class suited to medium- to high-load clamping tasks. The inclusion of a nut and washer in the delivery supports even pressure distribution and reduces the risk of loosening under vibration. Where repeatable torque application is required, this bolt’s mechanical rating allows predictable clamping forces and contributes to a safer, more stable production environment. Clear dimensions and quick verification at the workbench Critical dimensions are provided for rapid assessment and installation. The head and shank geometry (A: 17.7 mm, B: 55 mm, E: 28 mm, K: 10 mm) enables verification against fixture drawings and ensures the bolt seats correctly in the 18 mm T-slot. Such explicit measures assist in planning tooling layouts and avoiding assembly errors; the standardised geometry also simplifies inventory management by matching established fixture specifications. For reliable fixtures using AMF components, contact Metav Werkzeuge for ordering or technical clarification — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833337NW Manufacturer: AMF Product type: T-slot bolt Standard: DIN 787 UID: 4000833337NW Key dimensions T-slot width: 18 mm Thread: M16 Overall length: 80 mm Axite dimensions: A 17.7 mm; B 55 mm; E 28 mm; K 10 mm Features Supplied with nut and washer Grade: 8.8 (as stated in label) Packaging unit: 1 Label: T-Nutenschraube DIN 787 T-Nut 18mm M16 L.80mm Güte 8.8 m.Mutter u.Scheibe AMF FAQ What T-slot size does this bolt fit? The AMF T-slot bolt DIN 787 is designed specifically for 18 mm T-slots and matches common fixture table profiles. Is the thread standard metric and what size is it? Yes, the fastener uses a standard metric M16 thread suitable for general fixture clamping applications. What does grade 8.8 indicate for performance? Grade 8.8 denotes a medium-high tensile strength class for steel fasteners; the AMF bolt’s specification supports reliable clamping under substantial loads while maintaining predictable elongation and torque behaviour. Are nut and washer included with the bolt? The delivery includes the corresponding nut and washer, allowing immediate installation and even load distribution across the clamped surface. Does the bolt comply with recognised standards for interchangeability? Compliance with DIN 787 ensures dimensional interchangeability with other components designed to the same standard, simplifying replacement and system planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Accessory Plate For LED Lamps - Vertex
Take advantage of a compact, purpose-built solution that combines precise Ø 80 mm dimensions with lightweight handling to simplify LED lamp installation. The steel‑framed design ensures reliable fixing and reduced assembly time; order the V-23 plate directly via Metav Werkzeuge for fast procurement and expert guidance. V-23 Plate Ø 80 mm — LED mounting plate by Vertex The V-23 is a compact mounting plate for fastening LED lamps, engineered for workshop and industrial lighting applications where a precise Ø 80 mm interface and dependable support are required Compact Ø 80 mm mounting plate Lightweight 0.27 kg construction Designed for LED lamps Secure fixing that speeds installation The compact mounting plate offers a consistent Ø 80 mm footprint that simplifies alignment during assembly. By providing a standardised contact surface, the plate reduces iterative adjustments and supports a faster, more predictable installation process. The clear dimensional specification and the product's GTIN: 4061905094545 support traceability and inventory management in production environments, contributing to efficient procurement and reduced downtime. Straightforward integration with LED fittings Engineered as an accessory for LED lamps, the plate enables reliable mechanical connection between luminaires and their mounting points. The simple form factor permits quick engagement with existing fixtures that accept an 80 mm interface, helping to cut installation time and lower logistic complexity. As a compact component from Vertex, it integrates into lighting assemblies where repeatable positioning and a minimal footprint are priorities, improving workshop throughput. Lightweight design for practical workshop handling Weighing just 0.27 kg, the plate is easy to handle during repetitive assembly tasks and exerts minimal load on mounting structures. The low mass reduces operator fatigue and lessens stress on brackets and housings over time, which is beneficial in both retrofit and new‑build scenarios. Its accessory role for LED systems makes it particularly useful where compact, reliable components are required to maintain long‑term fixture stability and serviceability. For procurement of the Vertex V-23 plate or tailored advice on integrating this LED mounting solution, contact Metav Werkzeuge for direct support from our Emmerich team Technical data Article number: V-23 GTIN: 4061905094545 Type: Plate Ø 80 mm Category: Accessory Core data Weight: 0.27 kg ECLASS: 27110390 Special features Accessory for LED lamps Brand: Vertex SKU: V-23 FAQ What are the exact dimensions of the plate? The plate provides a defined Ø 80 mm interface; the designation refers to the nominal outer diameter of the mounting surface. Is the plate suitable for all LED lamp types? The accessory is designed for use with LED lamps that accept an 80 mm mounting interface; specific compatibility depends on the luminaire's mounting design. How much does the mounting plate weigh? The plate has a mass of 0.27 kg, offering lightweight handling during installation. Does the product include a manufacturer identifier for traceability? Yes, the product is listed with GTIN: 4061905094545 and the SKU V-23 for inventory and procurement control. Who manufactures the plate? The plate is produced by Vertex and distributed under the designation V-23 as an LED accessory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
80mm Adapter Sleeve With 30mm Bore For Large Boring Bars, Quick-Change Steel Holder Head Compatibility - TECWERK
Benefit from reduced changeover times and a robust clamping interface: the holder’s 30 mm cylindrical bore and 80 mm length enable direct mounting of large boring bars and Morse taper sleeves for efficient shop-floor operation. Order the holder directly via Metav Werkzeuge or consult the specialists for integration advice. TECWERK quick-change holder for steel holder head A — 30 mm bore, 80 mm length A TECWERK quick-change holder designed for direct mounting of large boring bars and Morse taper sleeves, intended for use with steel holder head A in lathe and boring-bar applications Quick-change design for fast tool swaps 30 mm cylindrical bore for large boring bars Direct mount for Morse taper sleeves Compatible with steel holder head A Faster changeovers and steadier production flow The quick-change concept reduces non-productive time by allowing rapid swapping of tooling components, which improves throughput on batch and single-piece production runs. The combination of a 30 mm bore and an 80 mm length creates a compact, repeatable interface that supports stable clamping of large-diameter boring bars; this leads to fewer alignments and shorter setup cycles. Where uptime and predictable cycle times matter, the design contributes directly to smoother manufacturing processes. Secure reception for large boring bars and Morse tapers A cylindrical inner diameter accepts substantial tool shanks and facilitates direct mounting of Morse taper sleeves, eliminating intermediate adapters in many setups. The cylindrical reception helps to centre the shank and transfer clamping force evenly, which reduces vibration and deflection during cutting. For users less familiar with Morse tapers: these sleeves enable secure, taper-based seating of cutting tools and are routinely used where axial stability and concentricity are required. Straightforward compatibility with standard quick-change systems Engineered specifically for the steel holder head A, the adapter integrates into established quick-change tool-holder assemblies without the need for customised fixtures. This compatibility simplifies inventory management and reduces the number of variant parts held in the toolroom. The compact design also supports consistent repeatability when replacing inserts or switching bar tooling, improving part-to-part uniformity on precision operations. Practical workshop use and handling The holder is supplied as a single unit and is convenient to store as a standard spare in maintenance kits. Its simple geometry makes surface inspection and routine checks quick, and the lack of complex moving parts reduces service intervals. In practice, adopting standardised quick-change holders contributes to a tidier workflow and fewer tooling errors, supporting both small engineering shops and larger production departments that prioritise reliability. Contact Metav Werkzeuge for tailored integration advice and to secure the TECWERK quick-change holder for improved lathe and boring-bar operations; Metav Werkzeuge supports delivery and technical consultation from Emmerich Technical data Article number: 2000832171NW Label: Quick-change holder for steel holder head A, 30 mm bore Manufacturer: TECWERK Product type: Quick-change holder Numbers Overall length: 80 mm Bore diameter: 30 mm Length (l): 80 mm Packaging unit: 1 Special features with cylindrical bore direct reception of large boring bars for Morse taper sleeves for quick-change steel holder head suitable for steel holder head A FAQ What is the primary function of this holder? The TECWERK quick-change holder is designed to provide a stable, repeatable interface for large boring bars and Morse taper sleeves, streamlining tool changes in lathe and boring applications. Which tool-holding systems is it compatible with? Compatibility is intended for the quick-change steel holder head A and standard Morse taper sleeves; the 30 mm cylindrical bore accommodates larger shank diameters used in heavy-duty boring. What are the key dimensions to check before ordering? Verify the bore diameter (30 mm) and overall length (80 mm); these dimensions determine fit with the existing steel holder head and the required reach for the machining operation. Can Morse taper sleeves be mounted directly? Yes, the design allows direct mounting of Morse taper sleeves, enabling a secure taper-based seating without additional adapters in many cases. What is the SKU or article number for ordering? The article number is 2000832171NW; this identifies the TECWERK quick-change holder for procurement and stock control. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
80mm Clamping Base Open Mounting Hole M10, Height Extension 80mm - BESSEY
Take advantage of a robust mounting solution that combines a compact design with a clear 80 mm clamping height extension and an M10 fixing thread for reliable machine-side installation; order directly via Metav Werkzeuge or request advice from our consultants for precise application support. BESSEY clamping base 80 mm — open fixing bore, M10 thread BESSEY clamping base 80 mm for BAS compact clamps, designed to provide increased clamping height and straightforward attachment via an open fixing bore suitable for M10 fastening Compact base for BAS clamping systems 80 mm clamping height extension Open fixing bore with M10 thread Compatible with DIN 912 M10 / M12 screws Increased setup flexibility through measurable clamping height The 80 mm clamping height extension offers a measurable advantage when adapting fixtures and jigs to different workpiece geometries. Designed as a clamping base for BAS compact clamps, the unit converts vertical clearance into usable clamping range, reducing the need for additional spacers. The straightforward specification of the height extension and thread means predictable setup times and fewer trial adjustments on the shop floor, which improves overall process efficiency and repeatability. Reliable fastening with standardised threads for quick integration Equipped with an M10 thread and prepared for DIN 912 cylinder screws in sizes M10 / M12, the component integrates with common fastening hardware used across maintenance and production environments. The specification ensures mechanical compatibility with industry-standard screws, enabling secure, vibration-resistant mounting. This standardisation reduces inventory complexity and simplifies procurement, supporting faster tool changeovers and a lower risk of incorrect fasteners being used at the workstation. Compact form factor that supports modular fixturing The product’s configuration for Compact clamp BAS systems and its open fixing bore make it an effective modular element in clamping assemblies. The compact footprint preserves workspace and allows closer placement of clamps for better load distribution. Where space constraints or tight clamping patterns are present, this mounting base helps maintain accessibility while delivering the required stability for machining, assembly, or inspection tasks. Clear benefits for production and workshop environments By combining a compact design, standard thread compatibility and a defined clamping height extension, the component offers an immediate productivity payoff: fewer bespoke adapters and faster fixture assembly. The clarity of technical parameters supports maintenance planning and quality control procedures, helping to ensure that fixtures perform predictably under repeated use. For workshops seeking pragmatic, durable mounting elements, the specification-driven approach lowers the barrier to consistent, repeatable clamping. For bespoke advice on integrating this BESSEY clamping base into existing BAS clamp setups or for ordering and logistics, contact Metav Werkzeuge — fast delivery from Emmerich and technical consultancy available by phone or e‑mail Technical Data Article number: 4123716070NW Label: Aufspannsockel 80mm Befestigungsbohrung offen Gew.M10 BESSEY Product type: Clamping base Manufacturer: BESSEY Version: for Compact clamp BAS; open fixing bore Facts Clamping height extension: 80 mm Thread: M10 For cylinder screw DIN 912: M10 / M12 Packaging unit: 1 Special features Open fixing bore Designed for BAS compact clamp systems Standardised thread compatibility FAQ What is the main function of this clamping base? The clamping base provides an 80 mm increase in clamping height for BAS compact clamps and a stable mounting point via an open fixing bore designed for M10 fastening. Which screws are compatible with the fixing bore? The fixing bore accepts cylinder screws to DIN 912, specifically stated for M10 and M12 sizes to ensure reliable mechanical attachment. Can this base be used with other clamping systems? Although configured for BAS compact clamps, the BESSEY clamping base can be integrated into other modular fixtures where an M10 threaded mounting and 80 mm height extension meet the application requirements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Machine Mounting Foot M12 x 1.25 x 120, Zinc-Plated, 41mm Height - TECWERK
Benefit from a secure machine stand and effective vibration isolation with the zinc-plated machine foot Size 1 ALBRECHT; its M12 x 1.25 x 120 mm threaded stud and 41 mm overall height ensure straightforward levelling and reliable load support — order via Metav Werkzeuge or consult our specialists for precise selection. Machine foot Size 1 ALBRECHT (TECWERK) – Zinc-plated, Ø 80 mm A robust machine foot, Machine foot Size 1 ALBRECHT, designed to stabilise lathes, milling machines and saws while providing two-way vibration isolation and precise levelling. Zinc-plated finish for corrosion resistance Suitable for lathes, milling machines and saws Max static load 50–500 kg per foot Height incl. levelling plate 41 mm Secure support with measurable performance The machine foot delivers a stable base by combining a large contact diameter with a threaded stud for secure fastening. The Ø 80 mm base distributes forces and reduces point loads, while the M12 x 1.25 x 120 mm stud provides a standardised connection for most machine frames. For reliable selection, establish the machine weight and divide by the number of mounting points to determine the max static load required per foot; the range offered here is 50–500 kg, which covers many bench and shop-floor applications. This calculation ensures a rational, data-led decision and avoids underspecification. Precise levelling and quick adjustment on site Levelling is achieved through the integrated adjustment range: height incl. levelling plate 41 mm and a levelling adjustment of 18 mm. The adjustment thread is designed for secure setting and repeatable alignment, so precision equipment remains level even under dynamic conditions. Installation is completed by fastening the stud and adjusting the foot until the machine sits correctly; once set, the levelling plate locks the position. The straightforward mechanical design minimises maintenance and supports continuous production with predictable machine alignment. Durable finish and broad machine compatibility The zinc-plated surface protects the mount against corrosion in industrial environments and prolongs service life where exposure to humidity or light contaminants occurs. Designed for use with lathes, milling machines and saws, the mount isolates vibrations both from the machine to the surroundings and from external sources to the machine, improving measurement stability and machining accuracy. Where sensitivity to vibration is critical, this levelling foot offers a practical compromise between load capacity and damping, ensuring machines retain their positional accuracy over time. Contact Metav Werkzeuge in Emmerich for expert advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and order the TECWERK machine foot with SKU 4000832072NW Technical data Article number: 4000832072NW Product: Machine foot Size 1 ALBRECHT Brand: TECWERK Packaging unit: 1 Key dimensions & loads Height incl. levelling plate H: 41 mm Levelling adjustment N: 18 mm Base diameter Ø D: 80 mm Threaded stud G: M12 x 1.25 x 120 mm Max static load per foot: 50–500 kg Materials & compatibility Zinc-plated finish Suitable for lathes, milling machines, saws and similar machinery Provides two-way vibration isolation Gives machines a secure stand and repeatable levelling FAQ What load can a single machine foot support? The Machine foot Size 1 ALBRECHT (TECWERK, SKU 4000832072NW) is rated for a max static load of 50–500 kg per foot, depending on application and mounting. How is the levelling adjustment performed? Levelling is achieved by rotating the threaded stud and setting the levelling plate within the 18 mm adjustment range; final position is secured mechanically to maintain alignment. Is the finish suitable for workshop environments? Yes, the zinc-plated surface resists corrosion and is suitable for typical workshop conditions, extending the service life of the mounting. Which machines are compatible with this mount? Designed for use with lathes, milling machines and saws, the mount gives a stable base and vibration isolation for precision and general-purpose machines. How to calculate the required load capacity per foot? Determine the total machine weight and divide by the number of mounting points to find the required static load per foot; then select a mount within the 50–500 kg range provided. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
80mm Reducer Sleeve MK1 to MK0 Hardened Ground DIN 2185 - TECWERK
Take advantage of a hardened, precision-ground adapter that preserves concentricity while enabling straightforward tool changes between Morse tapers; the combination of standard conformity (DIN 2185) and robust surface finish supports reliable workshop operation. Order directly via Metav Werkzeuge or consult our advisors for specification support. TECWERK Reducing Sleeve DIN 2185 MK1→MK0, hardened & ground The TECWERK reducing sleeve DIN 2185 MK1→MK0 provides a secure adapter for converting an MK1 outer taper to an MK0 inner taper, ideal for machine shops and toolrooms requiring dependable Morse-taper compatibility. DIN 2185 standard-compliant Hardened and ground inside and out Adapts MK1 to MK0 Morse taper Accurate taper adaptation for repeatable toolholding The reducing sleeve is designed for precise adaptation between Morse tapers, maintaining concentricity and minimising axial runout during machining operations. Manufactured to DIN 2185, the component supports consistent alignment of tooling and spindles, which directly reduces rework and scrap rates in batch production. By translating taper geometry faithfully from MK1 to MK0, the sleeve helps preserve the original tool geometry and cutting conditions, enabling predictable results across successive tool changes. Durable finish and heat treatment for long service life A combination of thorough hardening and precision grinding on both internal and external surfaces ensures the sleeve withstands repeated seating and withdrawal without notable wear. The hardened substrate provides resistance to deformation, while the ground finish guarantees close-fit contact with mating tapers, reducing the likelihood of fretting and ensuring stable torque transmission. These properties lower maintenance intervals and contribute to a reliable toolholding routine in heavy-use environments. Practical benefits for workshop efficiency With an overall length of 80 mm, the adapter offers a compact yet stable interface that suits lathes, drill presses and milling machines where interchangeability is required. The straightforward mechanical compatibility with tools featuring a Morse taper simplifies inventory management by allowing a smaller set of expensive taper-mounted tooling to serve multiple machines. The component's predictable behaviour supports workflow optimisation and saves setup time during frequent tool changes. Guidance for selection and safe operation Select the sleeve where conversion from MK1 to MK0 is required and where adherence to DIN 2185 is beneficial for quality assurance. The hardened and ground finish reduces the need for immediate reconditioning, but regular inspection for wear and cleanliness of mating tapers is recommended to preserve performance. For specific tolerance requirements or special machine interfaces, technical consultation can clarify suitability and minimise the risk of incompatibility. For reliable taper adaptation, specify the TECWERK reducing sleeve and arrange supply through Metav Werkzeuge — orders and technical enquiries are handled from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832351NW Norm: DIN 2185 Product type: Reducing sleeve Facts Outer taper: MK1 Inner taper: MK0 Overall length: 80 mm Packaging unit: 1 Special features Hardened and ground inside and out For tools with Morse taper Execution: hardened and ground FAQ What taper conversion does this sleeve perform? The sleeve converts an MK1 outer taper to an MK0 inner taper, as specified for the TECWERK reducing sleeve (SKU 2000832351NW). Is the adapter suitable for frequent tool changes? Yes, the hardened and ground surfaces of the reducing sleeve are intended to withstand repeated seating and withdrawal consistent with routine workshop use. Does the sleeve conform to a recognised standard? The component is manufactured to DIN 2185, ensuring standardised taper geometry and compatibility with other DIN-compliant tooling. What is the overall length and how does it affect stability? The overall length is 80 mm, providing a compact yet stable interface that supports accurate toolholding during machining. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
80mm Set Screw DIN 6379 Hardened 8.8, M16 Thread - AMF
Take advantage of a durable, standard-compliant fastener that combines consistent mechanical performance with straightforward installation; the heat-treated property class 8.8 and M16 thread ensure dependable clamping strength for industrial assemblies. Order directly via Metav Werkzeuge or consult Metav’s experts for specification advice and secure supply from their Emmerich facility. Stud screw DIN 6379 – M16 x 80 mm, heat-treated to property class 8.8 (AMF) Stud screw DIN 6379 – M16 x 80 mm, heat-treated to property class 8.8 (AMF) is a purpose-made fastener for load-bearing machine and structural joints, specified to DIN 6379 for repeatable mechanical performance DIN 6379 compliant design Heat-treated to property class 8.8 M16 thread with 80 mm overall length Across-flats tool engagement 19 mm Reliable clamping performance for industrial assemblies The stud screw is manufactured to DIN 6379, delivering a predictable combination of tensile and yield strength thanks to the heat-treated finish at property class 8.8. This material treatment increases load capacity while maintaining ductility, which helps prevent sudden brittle failure in cyclic or dynamic applications. In practice, that means the fastener sustains higher preloads and resists relaxation under vibration—attributes that promote longer service intervals and fewer rework cycles in production lines and maintenance schedules. Clear specification for correct component selection Critical specifications are immediately usable for procurement and engineering documentation: M16 thread, 80 mm overall length and a spanner engagement of 19 mm indicate the intended mating hardware and tool sizes. The part is listed under SKU 4000833272NW and packaged as Packaging unit 1, which simplifies traceability and inventory management. Specifying the fastener by these data points reduces the risk of ordering mismatched items and supports consistent assembly quality across batches. Efficient workshop handling and installation The combination of standard thread sizing and a conventional across-flats dimension enables rapid installation with common workshop tools, reducing downtime during assembly or repair. Because the component adheres to a recognised DIN standard, it integrates smoothly into existing bills of materials and quality checks. The result is improved shop-floor throughput and fewer interruptions caused by atypical fasteners, supporting a leaner workflow in both manufacturing and maintenance contexts. Suitable applications and material compatibility Designed for general steel construction, machinery assembly and repair work, this stud screw is a pragmatic choice where a reliable threaded connection is required. The AMF designation denotes the brand origin; the fastener’s heat treatment to 8.8 offers a suitable balance for medium-duty structural tasks. Where higher hardness classes or corrosion resistance are necessary, selection should be guided by specific environmental and mechanical requirements to ensure optimal longevity. Contact Metav Werkzeuge for tailored advice on integrating this AMF stud screw into production or maintenance planning and to arrange prompt delivery from Emmerich. Technical data Article number: 4000833272NW Label: Stud screw DIN 6379 M16x80 mm heat-treated to 8.8 AMF Manufacturer: AMF Facts Thread: M16 Overall length: 80 mm Width (across flats/tool engagement): 19 mm Packaging unit: 1 Special features Heat-treated to property class 8.8 Compliant with DIN 6379 Product type: Stud screw FAQ What mechanical class does this stud screw have? The stud screw is heat-treated to property class 8.8, providing a balanced tensile and yield strength suitable for many industrial fastening tasks. Is the fastener compliant with recognised standards? Yes, the component is specified to DIN 6379, ensuring dimensional and mechanical conformity for use in standard assemblies. Which thread and length are supplied with this SKU? The item is supplied as an M16 thread with an 80 mm overall length under SKU 4000833272NW. For which applications is this fastener most suitable? This AMF stud screw is suitable for steel construction, machine assembly and maintenance where medium-duty tensile properties and standardised dimensions are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M10 Heat-Treated Class 10.9 DIN 6379 - AMF
Take advantage of the combination of DIN 6379 compliance, M10 x 80 mm dimensions and tensile class 10.9 for secure, high-strength connections in mechanical and assembly applications; order the stud screw directly via Metav Werkzeuge or ask our consultants for application advice. Stud screw DIN 6379 M10 x 80 mm — high-strength, tempered to 10.9 (AMF) A stud screw DIN 6379 M10 x 80 mm designed for demanding fastening tasks in mechanical assemblies, driven where high clamping force and standard conformity are required High tensile class 10.9 Standard-compliant DIN 6379 M10 thread for standard fittings Hex width 13 mm across flats Robust fastenings where strength matters The combination of a M10 x 80 mm thread and tensile class 10.9 delivers reliable clamp loads for connections that must withstand vibration and dynamic stress. The heat treatment to property class 10.9 means the component maintains a high yield and tensile strength compared with untreated fasteners, reducing the risk of elongation or failure under load. Specified to an industrial standard, this fastening solution supports consistent assembly quality and predictable mechanical behaviour in production environments. Clear standards and predictable compatibility Manufactured to DIN 6379, the fastener ensures compatibility with industry-standard nuts and threaded holes, simplifying parts procurement and inventory management. The M10 thread size is widely used across machines and jigs, enabling straightforward replacement and retrofit operations. Where interchangeability and conformity to engineering drawings are essential, the adherence to DIN 6379 reduces inspection time and supports a smoother approval process in quality-controlled workshops. Practical design for efficient installation With a 13 mm across-flats width and an overall length of 80 mm, the stud is suited to common installation tools and sockets, enabling quick assembly and maintenance. The geometry balances grip and accessibility, which can shorten fixture time on production lines or during on-site servicing. Where torque control is used, the combination of thread form and heat treatment provides predictable torque–tension behaviour, aiding correct preload without excessive settling. Application guidance and material suitability Tempered to property class 10.9, this stud is intended for high-strength steel applications rather than for corrosion-critical environments unless additional surface protection is specified. The product is particularly suitable for mechanical assemblies, frames, and tooling where high clamping force is prioritised. For specific substrate combinations or environmental exposures, specification checks are recommended to confirm suitability and any need for coatings or alternative materials. Procurement reliability and traceable identification Each item is traceable by SKU and designation for streamlined logistics and quality records. Consistent labelling and standard conformity facilitate batch checks and integration into inventory systems. Choosing industry-standard fasteners like this stud supports reduced downtime through easier sourcing of spares and predictable interchangeability across equipment from different suppliers. For secure, high-strength connections and ordering support, contact Metav Werkzeuge for procurement advice and reference SKU 4000833252NW — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance. Technical data Article number: 4000833252NW Designation: Stiftschraube DIN6379 M10x80mm vergütet auf 10.9 AMF Brand: AMF Facts Thread: M10 Overall length: 80 mm Width across flats: 13 mm Packaging unit: 1 UID: 4000833252NW Addition: b: 50 Special features Tempered to property class 10.9 Standard: DIN 6379 Product type: Stud screw FAQ What mechanical strength does this stud provide compared with standard bolts? This stud is heat-treated to tensile class 10.9, providing higher tensile and yield strength than untreated or lower-class fasteners, making it suitable for applications requiring increased clamp force. Is the thread size compatible with common M10 nuts and inserts? Yes, the M10 thread conforms to standard dimensions and mates with conventional M10 nuts and threaded inserts specified for metric fastenings. Can this stud be used in corrosive environments? The item is supplied tempered to class 10.9; corrosion resistance depends on surface finish or coating, which is not specified for this SKU, so additional protection should be considered for corrosive conditions. How is the product identified for ordering and inventory? The stud is referenced by SKU 4000833252NW and the DIN 6379 designation; these identifiers support traceability and correct procurement. What tooling is recommended for installation? A 13 mm across-flats tool or socket matches the stud geometry for safe torque application and efficient installation during assembly or maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M12 Hardened 10.9, DIN 6379 - AMF
Take advantage of the combination of DIN 6379 compliance, heat treatment to property class 10.9 and standard M12 dimensions for dependable, repeatable fastening in mechanical assemblies; order the AMF stud bolt via Metav Werkzeuge or consult Metav’s technical team for specification advice. AMF stud bolt DIN 6379 M12 x 80 mm – heat-treated to property class 10.9 The AMF stud bolt DIN 6379 M12 x 80 mm is a high-strength fastening component intended for mechanical assemblies, maintenance tasks and industrial repair jobs where standardised threads and certified tensile properties are required. Complies with DIN 6379 standard Heat-treated to property class 10.9 M12 thread for common industrial fittings 80 mm overall length for deep connections Robust connection performance for critical joints The stud is manufactured to DIN 6379, which guarantees interchangeability and predictable mechanical behaviour across assemblies. Heat treatment to property class 10.9 increases yield and tensile strength compared with lower classes, making this stud suitable for demanding bolted joints where service loads are significant. By choosing a component that adheres to an established standard, maintenance planners benefit from faster part selection and reduced downtime when replacements are required. Precise dimensions for reliable assembly and fit With an M12 thread and 80 mm overall length, this stud offers a straightforward fit into standard tapped holes and mating nuts. The supplied nominal width of 15 mm ensures consistent engagement and clamping force when torqued to the appropriate values for class 10.9 fasteners. Clear dimensional data reduces the need for trial fittings and simplifies inventory management thanks to the predictability of thread and length specifications. Practical advantages for procurement and workshop use Standardisation and traceable mechanical properties make stock rotation and quality assurance easier for purchasing and workshop teams. The stud is supplied in a single-piece packaging unit, reducing handling complexity for small maintenance tasks. Compliance with recognised norms supports audits and documentation requirements, while the robust heat treatment reduces the likelihood of premature failure in service, contributing to safer and more reliable installations. For reliable high-strength fastening from AMF order directly via Metav Werkzeuge GmbH or contact Metav’s specialists at info@metav-werkzeuge.com / +49 2822 7131930 for specification support and availability Technical data Article number: 4000833259NW Standard: DIN 6379 Manufacturer: AMF Product type: Stud bolt Facts Thread: M12 Overall length: 80 mm Width: 15 mm Packaging unit: 1 UID: 4000833259NW Special features Heat-treated to property class 10.9 Complies with DIN 6379 Brand: AMF Additional dimension b: 50 FAQ What standard does this stud follow? The stud conforms to DIN 6379, ensuring standardised thread and form for the AMF stud bolt (SKU 4000833259NW). What mechanical class is this fastener? This AMF stud bolt is heat-treated to property class 10.9, providing enhanced tensile and yield performance for demanding applications. Which thread and length are specified? The fastening element is an M12-thread stud with an overall length of 80 mm, suitable for common industrial fittings. How is the product supplied for workshop use? The AMF stud bolt (4000833259NW) is supplied in a single-piece packaging unit for straightforward handling and inventory control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M6 Hardened Grade 8.8, DIN 6379 - AMF
Reliable connection through Grade 8.8 hardness and a standardised M6 thread combine to deliver secure assemblies with consistent clamping force; suitable for industrial fixtures and maintenance work. Order the part directly via Metav Werkzeuge or consult our product advisers for specification matching. Stiftschraube DIN6379 M6x80mm — hardened M6 stud bolt for metric fastening A Stiftschraube DIN6379 M6x80mm designed for secure joins in mechanical and assembly applications, complying with DIN standards and tempered to Class 8.8 for enhanced tensile strength. DIN 6379 standard-compliant Hardened to grade 8.8 Metric thread M6 80 mm overall length Proven strength for industrial fastening The fastener is manufactured to DIN 6379, ensuring dimensional consistency and interchangeability across assemblies. With a M6 metric thread and an 80 mm overall length, the component delivers predictable engagement depth and reliable load distribution. The specified Grade 8.8 tempering indicates a high tensile strength and improved fatigue resistance, making the fastener suitable for repetitive load cycles in production and maintenance environments. This combination reduces downtime by lowering the risk of premature failure and simplifies procurement through standard conformity. Practical compatibility and installation advantages Compatibility with standard metric tooling and thread tolerances reduces set-up time on the shop floor. The stud’s metric thread enables straightforward integration with tapped holes, nuts or coupling components commonly used in mechanical assemblies. Where adjustment or replacement is required, the standardised dimensions support rapid part matching and inventory harmonisation, contributing to a leaner spare-parts strategy. The AMF designation denotes the manufacturer label on the article, assisting traceability and supplier selection. Durable performance and application guidance Tempering to 8.8 enhances yield and tensile limits while preserving machinability for secondary operations where minor thread finishing may be needed. For applications demanding secure, reusable mechanical joints—such as fixture construction, machine rebuilds and conveyor supports—the hardened stud provides consistent clamping behaviour. When specifying for critical joints, pair the stud with matching grade washers and nuts to maintain the assembly’s rated strength and to avoid galvanic or mechanical incompatibilities. For procurements of hardened metric stud bolts and further technical advice on AMF fasteners, contact Metav Werkzeuge for tailored recommendations and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833244NW SKU: 4000833244NW Standard: DIN 6379 Description: Stiftschraube M6x80mm, tempered to 8.8, AMF Measurements / Core data Thread: M6 Overall length: 80 mm Width: 9 Materials / Special features Hardness class: 8.8 Packaging unit: 1 Addition: b: 50 Manufacturer: AMF FAQ What standard does this stud comply with? The stud complies with DIN 6379, ensuring standardised dimensions and interchangeability for metric fastening applications. What are the key mechanical characteristics of this fastener? The stud is tempered to Grade 8.8, providing enhanced tensile strength and good fatigue performance for industrial use. Which thread size is provided and what is the overall length? The fastener features a M6 metric thread and an overall length of 80 mm (SKU 4000833244NW). Is this stud suitable for repeated assembly and disassembly? Yes; the Grade 8.8 temper combined with standard metric threading supports multiple assembly cycles when paired with compatible nuts and washers. How is the article packaged? The article is supplied in a packaging unit of 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Bolt M8 Heat Treated 10.9, DIN 6379 - AMF
Benefit from a combination of DIN-compliant specification, high tensile strength and precise dimensions for dependable mechanical assemblies; order the threaded stud directly via Metav Werkzeuge or consult our advisors if technical clarification is required. Threaded stud DIN 6379 M8 x 80 mm, hardened to 10.9 — AMF Threaded stud DIN 6379 M8 x 80 mm, hardened to 10.9 — AMF is a metric fastener designed for secure mechanical joining in industrial and workshop applications. DIN 6379 compliant Hardened to property class 10.9 Metric thread M8 x 80 mm Packaging unit 1 piece Long-term load capacity for high-stress joints The threaded stud is engineered to meet the demands of high-stress mechanical connections by combining standardised dimensions with a strength class of 10.9. The heat treatment to property class 10.9 increases yield and tensile strength, which allows assemblies to resist shear and tensile loads more reliably than untreated fasteners. In practice, this means fewer service interventions and a reduced risk of mechanical failure in critical joints. The conformity to DIN 6379 ensures interchangeability in repair and production environments, simplifying procurement and replacement processes. Precise dimensions that reduce assembly time With a metric thread M8 x 80 mm and a nominal width of 11 mm, the component provides predictable fitment in threaded holes and mating components. The standard thread geometry and overall length are manufactured to tolerances that support consistent torque values during assembly. Consistent dimensions reduce rework and enable faster line-side installation because torqueing procedures and tool settings remain stable across batches. The result is improved production flow and less downtime during assembly changes. Material properties and practical benefits in service Hardened and tempered to reach the specified property class, the fastener exhibits enhanced resistance to deformation under load. This resistance is particularly beneficial where vibration or cyclic loading is present, since the mechanical properties of the material help maintain clamping force over time. The component’s simple geometry—fully threaded stem with standard metric pitch—facilitates predictable load distribution and makes it suitable for a broad range of industrial fastening tasks. Where traceability is required, the clear specification to DIN 6379 supports documentation and verification during quality checks. Supply and ordering reliability for production planning Supplied individually in a packaging unit of 1, the item is suitable for spare-part provisioning, maintenance tasks and small-batch production use without oversupply. The clear SKU and standard specification allow purchasing departments to integrate the part into inventory systems with confidence. Sourcing from an established distribution partner reduces logistics uncertainty and supports just-in-time replenishment strategies, particularly where exact conformity to standards is mandatory for safety or certification purposes. For technical advice or to secure a dependable supply of the AMF threaded stud (DIN 6379, M8 x 80 mm, property class 10.9), contact Metav Werkzeuge for personalised procurement and application support. Technical data SKU: 4000833247NW Product type: Threaded stud Label: Threaded stud DIN 6379 M8 x 80 mm, hardened to 10.9, AMF Numbers / Core technical data Thread: M8 Overall length: 80 mm Width: 11 mm Packaging unit: 1 Special features Standard: DIN 6379 Strength class: 10.9 (heat-treated) Addition b: 50 FAQ What strength class does this stud have? The threaded stud is heat-treated to property class 10.9, providing elevated tensile and yield strength suitable for demanding assemblies. Is the part manufactured to an established standard? Yes, the component conforms to DIN 6379, which ensures standard dimensions and interchangeability for industrial use. Which thread and length are specified for this item? The item features a metric M8 thread with an overall length of 80 mm, as indicated by the product specification and SKU 4000833247NW. How is the fastener supplied for maintenance tasks? The fastener is supplied in a packaging unit of 1, allowing precise replenishment for repairs and small-batch requirements. Can this stud be used where vibration is present? Due to the 10.9 strength class and heat treatment, the stud offers improved resistance to deformation, making it suitable for applications subject to vibration and cyclic loads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Stud Screw DIN 6379 Hardened Grade 8.8, M20 Thread - AMF
Take advantage of the combination of standardised DIN 6379 geometry, a metric M20 thread and property class 8.8 strength for reliable medium‑duty assemblies; order directly via Metav Werkzeuge or consult our advisers for specification matching. Stud bolt DIN 6379 M20x80 mm — heat-treated to 8.8, AMF A Stud bolt DIN 6379 M20x80 mm designed for secure, repeatable fastening in machinery and equipment where standard conformity and predictable mechanical behaviour are required. DIN 6379 standardised geometry Property class 8.8, heat‑treated Thread M20 for metric assemblies Overall length 80 mm, shank b = 32 mm Reliable strength for medium‑duty fastening tasks Manufactured to DIN 6379, the fastener delivers consistent form and fit, while the 8.8 property class denotes a heat‑treated component suited to medium‑duty connections. Such classification ensures a dependable balance between tensile strength and ductility, which reduces the risk of unexpected failure under typical assembly loads. The result is a fastener that supports predictable performance in recurring maintenance and production environments, lowering downtime and rework. Predictable fit and easy installation with metric standards The M20 metric thread and the defined shank dimension b = 32 mm provide compatibility with common nuts and threaded holes used across industrial applications. Compliance with the DIN specification simplifies procurement and assembly planning because mating parts can be selected with confidence. The clear geometric definition reduces assembly variability, shortens installation times and supports consistent torque application during tightening. Practical logistics and assured sourcing for workshops Supplied by the brand AMF and offered as an individual unit, the component is suitable for replacements and small batch assemblies where single items are required. Sourcing via Metav Werkzeuge benefits from a European quality filter and centralised stock management, enabling reliable supply to workbenches and workshops. The SKU and standard reference help to integrate the component into inventory systems and maintenance lists for streamlined operations. Contact Metav Werkzeuge for specification advice and secure supply of AMF stud bolts directly from our Emmerich warehouse Technical data Article number: 4000833282NW Product type: Stud bolt Brand: AMF Standard: DIN 6379 Thread: M20 Overall length: 80 mm Width: 27 mm Shank b: 32 mm Packaging unit: 1 Facts Thread size: M20 Length: 80 mm Width: 27 mm Shank b dimension: 32 mm Pack: 1 piece Special features Heat‑treated to property class 8.8 Metric DIN standardised geometry Suitable for repeatable industrial assemblies FAQ Does this fastener conform to a recognised standard? Yes. The item is produced in accordance with DIN 6379, ensuring standardised geometry and interchangeability for metric assemblies. What does property class 8.8 indicate for the stud bolt? Property class 8.8 means the fastener is heat‑treated to provide elevated tensile strength and yield characteristics suitable for medium‑duty fastening tasks where reliable mechanical performance is required. What are the key dimensions to check for compatibility? Key dimensions are M20 thread, overall length 80 mm, width 27 mm and a shank section b = 32 mm; reference the SKU 4000833282NW when cross‑checking mating parts. Is the component sold individually or in bulk? This item is supplied as a single unit (packaging unit: 1), which is practical for replacement parts or small assembly runs. Can the stud bolt be used in machinery and equipment assemblies? Yes. The combination of standard conformity and property class makes it suitable for many machinery and equipment fastening applications; however, specific load and safety calculations should follow the relevant engineering guidelines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm T-Nut Clamp Bar 10mm Slot DIN 6314, For M10 - AMF
Secure and repeatable clamping for machine tables is achieved with the combination of DIN 6314 standard compliance, compatibility with 10 mm T-slots, and an 80 mm overall length; these features support efficient set-ups and reliable fixture assembly. Order or consult Metav Werkzeuge for tailored supply and immediate availability. Clamping iron DIN 6314 for 10 mm T-slot, 80 mm – AMF A robust Clamping iron DIN 6314 intended for secure workholding in 10 mm T-slots on machine tables and fixtures DIN 6314 standardised design Fits 10 mm T-slots 80 mm effective clamping length Suitable for M10 fastening Consistent, standardised workholding for production use The DIN 6314 specification ensures a familiar, industrially accepted geometry that simplifies fixture design and interchangeability. The clamping iron offers an 80 mm overall length paired with an 11 mm flange width, providing a predictable contact area for securing components. Because the part is designed for a 10 mm T-slot, mechanical engineers and workshop technicians benefit from reduced set-up times and consistent clamping force across repeated operations, which supports higher throughput and fewer reworks. Straightforward compatibility with common fastening systems Designed to accept M10 fastenings, the component integrates seamlessly into existing clamping assemblies and retrofit projects. The standard thread compatibility removes the need for special adapters, while the T-slot geometry supports modular fixturing. For production planners, this means quicker tool changes and a reduction in bespoke parts inventory, enabling smoother transitions between jobs and better utilisation of machine time. Practical benefits for maintenance and workshop workflows The compact dimensions and standard form factor of this clamping element make inspection, replacement and layout planning uncomplicated. The predictable interface to 10 mm T-slots simplifies spare-part lists and eases procurement. In day-to-day repair or assembly tasks, the uniformity of parts like this AMF clamping iron helps maintain uptime, as technicians can rely on a known datum and clamping behaviour when positioning workpieces on the machine table. For reliable T-slot clamping with AMF quality and fast supply from Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss availability and delivery options Technical data Article number: 4000833002NW Standard: DIN 6314 Description: Clamping iron for T-slot 10 mm, 80 mm, AMF Facts T-slot width: 10 mm Width: 11 mm Total length: 80 mm Suitable for: M10 Packaging unit: 1 Special features Label: Spanneisen DIN 6314 f.T-Nut 10mm L.80mm AMF Axite enrichment: A: 15; B2: 30; B3: 12; E1: 15; E2: 30 FAQ What T-slot size is this clamping iron intended for? The clamping iron is made for a 10 mm T-slot, matching standard table profiles that accept 10 mm slot widths and ensuring secure seating and repeatable fixturing. Which thread size should be used with this component? Use an M10 fastening for assembly; the geometry is specified to work with M10 bolts to ensure proper clamping force and compatibility. Does the component conform to any standard? Yes, the part is manufactured to DIN 6314, which defines the form and dimensions for this category of clamping element and supports interchangeability. Is this suitable for modular fixturing and repeat setups? The standardised shape and 80 mm length make the AMF clamping iron well suited to modular fixturing, helping to reduce set-up times and improve repeatability across production runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm T-Slot Bolt M12 12mm T-Slot With Nut And Washer Grade 10.9 - AMF
Take advantage of the combination of high clamping strength, DIN‑standard compatibility and complete fastening set for dependable fixture assembly; order the AMF T-slot screw directly via Metav Werkzeuge or consult our specialists for application advice. AMF T‑slot screw DIN 787 – M12 x 80 mm, Grade 10.9 The AMF T‑slot screw DIN 787 M12 x 80 mm serves as a high‑strength T‑slot fastener for standard 12 mm T‑slot profiles, engineered for machine fixtures, assembly tables and industrial tooling applications. Grade 10.9 high tensile strength Fits 12 mm T‑slot profiles Complete set with nut and washer DIN 787 compliant fastening Secure clamping with proven high‑strength performance The fastener is specified as Grade 10.9, indicating a high tensile class suitable for demanding clamping tasks; combined with the M12 thread, this produces a robust connection that reduces slippage and maintains positional accuracy under load. Manufactured to DIN 787, the design conforms to a recognised standard for T‑slot bolts, which simplifies engineering decisions and supports consistent assembly quality across fixtures. This technical reliability translates into fewer reworks and steadier production output. Precision fit for standard 12 mm T‑slot systems Designed for 12 mm T‑slot profiles, the screw’s geometry matches common machine‑table channels to ensure a secure engagement and predictable torque behaviour. The 80 mm overall length accommodates thicker clamping stacks, while the inclusion of nut and washer in the delivery means a complete fastening set is available straight away, shortening preparation time for installation. Clarifying the function of a T‑slot fastener: the head slides into the slot and, when tightened, converts axial clamping force into a secure hold against lateral displacement. Efficient installation and practical workshop advantages A standardised fastening such as this reduces selection time and simplifies inventory management in busy workshops and production facilities. With consistent dimensions and documented conformity to DIN 787, planning for fixture changes or repeat production runs becomes more straightforward, lowering downtime between jobs. Specification details such as thread size, slot compatibility and set contents support engineers and buyers in choosing the correct component for assembly and maintenance tasks, enhancing operational continuity. For procurement or application-specific advice on the AMF T‑slot screw and its suitability for particular fixtures, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical details and supply options. Technical data Article number: 4000833311NW Standard: DIN 787 Product type: T‑slot screw Brand: AMF Facts T‑slot width: 12 mm Thread: M12 Overall length: 80 mm Packing unit: 1 Special features Grade 10.9 Includes nut and washer Axite enrichment: A: 11.7; B: 55; E: 18; K: 7 FAQ Is this fastener compatible with 12 mm T‑slot profiles? Yes. The AMF T‑slot screw DIN 787 M12 x 80 mm is designed specifically for 12 mm T‑slot profiles and engages the slot geometry defined by that standard. What does Grade 10.9 indicate for this T‑slot screw? Grade 10.9 denotes a high tensile class for the bolt, giving increased clamping strength and resistance to shear compared with lower grades; the AMF item is intended for heavy‑duty fixture applications. Does the delivery include the necessary assembly parts? Yes. The product is supplied as a complete set with nut and washer included, enabling immediate assembly without sourcing additional components. Is the material or coating specified for corrosion resistance? The provided product data does not specify material or coating details; material/coating information should be checked on the technical datasheet before use where corrosion resistance is a requirement. Is the fastener manufactured to an established standard? Yes. The fastener conforms to DIN 787, ensuring standardised form and fit for T‑slot fastening applications; refer to SKU 4000833311NW for ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm T-Slot Screw 14mm T-Slot M12 Grade 10.9 With Nut And Washer - AMF
Take advantage of the combination of DIN conformity, high tensile strength and precise T‑slot compatibility for reliable clamping performance in production environments; order the fastener directly via Metav Werkzeuge or consult our specialists if further specification is required. AMF T-slot bolt DIN 787 — 14 mm T-slot, M12, grade 10.9 A T-slot bolt DIN 787 engineered for secure clamping in 14 mm T‑slots on machine tables and tooling fixtures DIN 787 standard compliance High-strength grade 10.9 Fits 14 mm T-slots Includes nut and washer Consistent, standardised clamping for industrial use Conformity with DIN 787 ensures uniform dimensions and interchangeability across machine tables and clamping systems, simplifying parts management and reducing setup time. The combination of an M12 thread and a grade 10.9 specification delivers a high tensile rating suitable for demanding fixtures, so production runs remain stable and repeatable. This fastener is designed for systems that require both reliable clamping force and adherence to industrial standards. Precise fit for 14 mm T-slots and defined axial geometry Optimised for a 14 mm T‑slot, the fastener's geometry supports consistent seating and load distribution in the slot profile. The supplied dimensional values (Addition: A: 13.7 mm; B: 55 mm; E: 22 mm; K: 8 mm) indicate the axial and engagement measures relevant for selection and clearance checks on tables and fixtures. Clear dimensional data reduces trial-and-error during installation and helps engineers verify compatibility with existing tooling quickly. Durable components and ready-to-install supply Supplied complete with nut and washer, the assembly reduces procurement complexity and avoids mismatched components at installation. The grade 10.9 designation denotes a high-strength steel fastener designed to withstand the mechanical stresses typical of clamping operations, contributing to longer service intervals and lower maintenance frequency. Choosing a complete fastener assembly supports uptime and consistent clamping behaviour in workshop environments. Practical benefits for workshops and production planners Using a standardised T‑slot fastener streamlines inventory and assembly procedures, aiding lean production and minimising machine downtime. The clear specification and inclusion of the fastening hardware mean fewer order lines and faster fits on the shop floor, while conformity to recognised standards supports quality assurance and documentation. For buyers seeking dependable supply and technical advice, Metav Werkzeuge provides centralised sourcing and expertise tailored to precision workshop needs. For procurement or technical consultation on the AMF T-slot bolt DIN 787, contact Metav Werkzeuge in Emmerich for reliable supply and specification support Technical Data Article number: 4000833318NW Label: T-Nutenschraube DIN 787 T-Nut 14mm M12 L.80mm Güte 10.9 m.Mutter u.Scheibe AMF Manufacturer: AMF Packaging unit: 1 UID: 4000833318NW Facts Standard: DIN 787 T-slot width: 14 mm Thread: M12 Total length: 80 mm Axial dimensions (A/B/E/K): A 13.7 mm / B 55 mm / E 22 mm / K 8 mm Special features Grade 10.9 high-strength Includes nut and washer Product type: T-slot bolt (T-Nutenschraube) FAQ What T-slot width is this fastener designed for? This fastener is designed for a 14 mm T‑slot; the axial and engagement dimensions (A: 13.7 mm; B: 55 mm; E: 22 mm; K: 8 mm) support correct seating in that slot size. Which thread and length are specified for the bolt? The bolt uses an M12 thread and a total length of 80 mm as stated for the AMF T‑slot bolt DIN 787 (SKU 4000833318NW). Does the delivery include the matching nut and washer? Yes, the supply is complete with nut and washer included, reducing the need to source separate components for assembly. What does grade 10.9 indicate for this fastener? Grade 10.9 denotes a high-strength steel fastener suitable for demanding clamping applications, providing improved tensile performance over lower-grade alternatives. Is the fastener made to an industry standard for interchangeability? Manufactured to DIN 787, the fastener adheres to defined dimensions for interchangeability across compliant machine tables and clamping systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Threaded Stud M14x80 Heat-Treated 8.8, DIN 6379 - AMF
Combining standard-compliant dimensions with high tensile performance, this stud bolt delivers secure, repeatable fastening for machinery and fixtures; its M14 thread and 80 mm overall length suit medium‑duty assemblies while heat treatment to strength class 8.8 improves durability. Order the fastener directly via Metav Werkzeuge or consult the technical team for application guidance. AMF Stud bolt DIN 6379 – M14 x 80 mm, strength class 8.8 A AMF Stud bolt DIN 6379 engineered for robust, standardised fastening in mechanical assemblies and fixture work. Stud bolt to DIN 6379, standardised Thread size M14 for medium-heavy joints Length 80 mm, precise metric dimensions Quenched and tempered to strength class 8.8 Engineered strength for demanding joints The fastener is supplied quenched and tempered to class 8.8, which translates into a clear operational benefit: greater resistance to yield and improved fatigue performance under cyclic loads. For assembly planners and maintenance engineers, the combination of high tensile strength and standardised manufacture reduces unexpected failures and extends service intervals. The metallurgical treatment concentrates performance where it matters, enabling secure clamping in structural connections while keeping handling straightforward for workshop technicians. Standardised dimensions for repeatable assembly Manufactured to DIN 6379, the component provides consistent geometry so that fit and function remain predictable across production runs. The M14 nominal thread diameter and 80 mm overall length support common metric mating parts and fixtures, making inventory integration and automated assembly simpler. Clear adherence to the recognised standard minimises the need for on-the-spot adjustments and supports quality control processes, permitting quicker inspection and acceptance during incoming goods checks. Practical workshop compatibility and supply continuity With precise metric specification and a compact footprint, the stud is compatible with standard installation tools and torque procedures used in mechanical workshops. Supplied singly (packaging unit 1) and identified by SKU 4000833265NW, the item suits targeted replacement tasks and small-scale maintenance orders without committing to large quantities. For procurement and inventory managers the reliable specification reduces supplier ambiguity, while planners benefit from a maintained parts list that supports uptime and predictable lead times. Contact Metav Werkzeuge for application advice and stock availability for AMF stud bolts and related fasteners; the team in Emmerich provides prompt technical information and order handling Technical Data Article number: 4000833265NW Designation: Stud bolt DIN 6379 M14 x 80 mm Manufacturer: AMF Packaging unit: 1 Core figures Thread: M14 Overall length: 80 mm Width: 17 Strength class: 8.8 Standard: DIN 6379 Special features Quenched and tempered Addition: b: 50 Product type: Stud bolt Label: Stiftschraube DIN6379 M14x80mm vergütet auf 8.8 AMF FAQ What strength class does the stud bolt have? The AMF stud bolt is heat treated to strength class 8.8, offering improved tensile and yield performance suitable for medium‑duty fastening applications. Which standard governs the dimensions of this fastener? Dimensions and manufacturing tolerances conform to DIN 6379, ensuring interchangeability with components specified to the same standard. What thread and length does the fastener have? The fastener is M14 threaded with an overall length of 80 mm, matching common metric fittings and allowing straightforward integration into existing assemblies. How is the product supplied for workshop use? The item is supplied as a single unit (packaging unit 1) and is listed under SKU 4000833265NW for ordering and stock management. Is this stud compatible with standard installation tools? Yes, the metric M14 thread and standard geometry permit installation with common torque tools and fixtures used in mechanical workshops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
82° 3500 N Clamping Screw Clamp With Flat Base, Zinc Plated, 4000 N Holding Force - Kukamet
Built for dependable fixturing in workshop and light industrial settings, the combination of a 4,000 N holding force, 3,500 N clamping force and a zinc-plated finish ensures secure, long-lasting performance; order the clamp directly via Metav Werkzeuge or consult our advisors for rapid delivery from Emmerich. Kukamet 841 Screw Clamp — robust lever-style screw clamp with 4,000 N holding force Kukamet 841 is a screw clamp designed for stable fixturing in workshop jigs and production benches, offering a compact footprint and robust mechanical performance. Zinc-plated body for corrosion resistance 4,000 N maximum holding force 3,500 N peak clamping force Flat base for stable fixture at 82° angle Secure clamping that reduces repositioning and rework The clamp delivers a measurable improvement in part retention thanks to its 4,000 N holding force and 3,500 N clamping force, which together provide secure fixation during machining, assembly and test operations. As a lever clamp, it converts operator input into repeatable force, reducing the risk of movement under load; this reliability translates into fewer interrupted cycles and less rework. Technical values such as the 82° working angle and specified forces make it straightforward to compare fixture options and select the right device for production requirements. Compact mounting and corrosion-resistant construction for workshops Designed with a flat base, the unit installs neatly on benches, plates or custom fixtures, keeping the clamping surface close to the workpiece for improved stability. The zinc-plated finish offers enhanced resistance to everyday workshop corrosion, extending functional life in environments where coolant splash or humidity occur. At 2.02 kg, the clamp provides a solid feel without excessive bulk, simplifying handling during setup while maintaining robust mechanical behaviour. Practical procurement and reference information for planners The clamp is suited to repetitive tasks in metalworking, fabrication and fixture building where a reliable mechanical hold is required. For ordering and inventory control, refer to SKU 841-2-D and GTIN 8680731505207 when specifying the product in procurement lists. The clear specification of forces and mounting type supports risk-averse decision-making in production planning and helps maintenance teams keep a consistent set of replacement units on hand. Contact Metav Werkzeuge for tailored advice and secure availability of the Kukamet 841 screw clamp from our Emmerich warehouse — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 841-2-D GTIN: 8680731505207 Category: Spanner Key Figures Weight: 2.02 kg Maximum clamping force: 3,500 N Maximum holding force: 4,000 N Angle: 82° Materials & Features Material: zinc-plated Mounting: flat base Clamp type: screw clamp Special feature: screw clamp design FAQ What applications are suitable for this clamp? The Kukamet 841 screw clamp (SKU 841-2-D) is intended for workshop jigs, fixture plates and light production work where a repeatable mechanical hold is required. How is the clamp mounted? Mounting is via the flat base, which allows secure attachment to benches or plates; the 82° working angle supports common fixture geometries. Which specifications should be used to compare alternatives? Compare maximum holding force (4,000 N) and maximum clamping force (3,500 N), along with base type and material finish, to assess suitability. Is the finish suitable for damp workshop environments? The zinc-plated surface provides standard corrosion resistance appropriate for many workshop conditions, extending service life compared with bare steel. How is the clamp referenced for ordering and stock control? Use SKU 841-2-D and GTIN 8680731505207 for procurement, stock management and spare-part requests. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
84mm Synchronised Thread Cutting Chuck ER25-GB With Coolant Feed, ±0.5mm Compensation DIN 69871 - TECWERK
Take advantage of the synchronised compensation and high runout accuracy to secure consistent threads in CNC production; the chuck’s ER25‑GB interface and compatibility with DIN 69871 Form A allow straightforward integration into SK40 spindles. Order directly via Metav Werkzeuge or ask the consultants for specification support. TECWERK synchronised tapping chuck, DIN 69871 Form A, SK40 – ER25‑GB, M3–M20 The TECWERK synchronised tapping chuck is a precision holder for synchronised tapping on CNC machines, engineered to compensate pitch differences and to handle M3–M20 threads with coolant feed for extended tool life. DIN 69871 Form A compatibility Compensates synchronisation errors ±0.5 mm For thread sizes M3–M20 ER25‑GB collet interface Integrated coolant feed for tool life Consistent threads through axial compensation and synchronisation The central benefit of this chuck is its axial length compensation, which bridges small pitch or timing discrepancies between the tapping tool and the machine’s synchronised spindle. Designed to absorb synchronisation errors on both push and pull, the system offers ±0.5 mm of longitudinal correction, reducing tap breakage and rework. By converting potential timing mismatch into controlled axial movement, the holder improves process reliability in high‑mix, high‑precision environments and supports both right‑ and left‑hand threads without additional tool changes. Rapid CNC integration with secure clamping and standardised interfaces Integration into conventional machining centres is simplified by adherence to DIN 69871 and a SK40 taper; the ER25‑GB collet interface ensures positive gripping of common tapping tools. The design delivers high clamping force through tensioned tapping collets with an integrated square drive, so tool slippage during torque reversal is minimised. For production planners, this means predictable repeatability and easier changeovers: standard interfaces reduce spindle adaptation time and support consistent cycle‑time planning across batches. Improved tool life and process stability with coolant and runout control A built‑in coolant feed helps evacuate chips and cool the cutting edge, extending tool life and maintaining thread quality. The holder’s construction prioritises high runout accuracy, which translates into reduced tool wear and more accurate thread forms, leading to fewer rejects and lower downstream finishing effort. In practice, this reduces maintenance intervals and contributes to a steadier production rhythm, supporting operational efficiency and lower total cost of ownership. Contact Metav Werkzeuge for tailored technical advice and to secure the TECWERK synchronised tapping chuck for reliable CNC threading solutions. Technical data Article number: 2000834915NW Manufacturer: TECWERK Product type: synchronised tapping chuck Facts Norm: DIN 69871 Form A Collet interface: ER25‑GB Outer diameter: 42 mm A (length): 84 mm Length compensation: -0.5 / +0.5 mm Suitable for threads: M3–M20 Special features With SK40 taper for direct spindle mounting Coolant feed integrated Compensates pitch differences of tapping tool and synchronised spindle Compensates synchronisation errors on push and pull Suitable for right‑ and left‑hand threads High runout accuracy High clamping force via tensioned tapping collets with integrated square drive FAQ What thread sizes can be handled with this chuck? The TECWERK synchronised tapping chuck is specified for thread sizes M3–M20, covering a broad range of common production threads. Is the chuck compatible with my CNC machine spindle? Compatibility is ensured where a SK40 taper and DIN 69871 Form A interface are available; the ER25‑GB collet adapts standard tapping tools to the spindle. How much axial compensation does the holder provide? Axial length compensation is ±0.5 mm, allowing the chuck to absorb small synchronisation deviations between tap and spindle. Can the holder be used for left‑hand threads? Yes, the design supports both right‑ and left‑hand threads without modification to the holder. Does the chuck support coolant supply? The chuck includes an integrated coolant feed to improve chip evacuation and extend tool life during tapping operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
85.725-86mm Horizontal Drill Head Max 2000 rpm, NT Shank - Vertex
Take advantage of the combination of precise NT-type compatibility, controlled high-speed operation and a solid, serviceable design for dependable drilling performance. Order the drilling attachment directly via Metav Werkzeuge or ask the consultants for integration advice. VHA-NT-30 drilling attachment (Horizontal) by Vertex — NT-type fit, max 2,000 rpm The VHA-NT-30 is a horizontal drilling attachment designed for integration with machines using NT-type bore heads, intended to provide a precise and stable drilling solution in industrial workshop environments NT-type bore head fit 85.725–86 mm Maximum 2,000 rpm operating speed Robust build; weight 26.5 kg Accurate fit for NT-head systems that reduces setup time The attachment is engineered for a defined bore head diameter range of 85.725–86 mm, which ensures a repeatable fit with NT-type interfaces. This measured tolerance minimises play between the machine spindle and the accessory, translating into improved positional accuracy and reduced rework. For operations that rely on consistent hole placement, the conformity to the NT dimension offers a direct advantage: less time on alignment and more time on production. The specification of the interface is given as a clear metric to support planning and procurement decisions. Stable high-speed operation for steady throughput Rated for operation up to 2,000 rpm, the horizontal attachment delivers balanced performance for a wide range of drilling tasks. The controlled maximum speed reduces vibration at the cutting zone and supports consistent chip formation when paired with appropriate drill geometry. The unit’s robust construction and a mass of 26.5 kg contribute to inertial stability during cycles, which helps maintain bore quality and extend tool life. These characteristics are particularly relevant when machining materials that demand steady torque and undisturbed spindle contact. Straightforward integration into NT-ready machines Compatibility with NT-type heads means the attachment can be specified where machines are prepared for standardized accessories; the defined bore head diameter removes ambiguity during selection. For workshops that plan tooling changes or upgrades, this attachment functions as a clearly defined modular element in the tool chain. Technical teams benefit from the transparent specification when assessing retrofit options or planning spindle layouts. If further technical clarification is needed for integration into a specific machine model, Metav Werkzeuge can provide consultancy and additional measurement data. Contact Metav Werkzeuge in Emmerich for expert advice and ordering of the Vertex VHA-NT-30 horizontal drilling attachment — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VHA-NT-30 GTIN: 4061905087998 Eclass: 17071990 Manufacturer: Vertex Facts Maximum speed: 2,000 r.p.m. Unit weight: 26.5 kg Bore head diameter compatibility: 85.725–86 mm (NT type) Special features Horizontal drilling attachment Designed for NT-type bore head interfaces SKU: VHA-NT-30 FAQ What machines is this attachment compatible with? The VHA-NT-30 horizontal drilling attachment is compatible with machines that accept NT-type bore head interfaces within the 85.725–86 mm diameter range; compatibility should be checked against the machine’s spindle or headstock documentation. What is the maximum operating speed of the attachment? The VHA-NT-30 by Vertex is specified for a maximum of 2,000 r.p.m., which supports steady drilling under appropriate cutting conditions. How does the attachment affect drilling accuracy? Because the accessory matches the defined NT bore head diameter tolerance, the VHA-NT-30 reduces lateral play at the interface and contributes to more consistent hole positioning and finish quality. Is the unit heavy to handle during installation? The attachment has a unit weight of 26.5 kg; the mass provides improved stability in operation but should be considered during handling and installation planning. Where can additional integration details be obtained? Metav Werkzeuge can provide further technical information and advise on integrating the Vertex VHA-NT-30 into specific machine setups; contact details are provided for direct consultation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com