Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
75mm Toggle Clamp Horizontal Base With Hook, 2.2kN Thrust, 3.2kN Hold, Black Oxide Finish - Kukamet
The combination of a robust blackened finish, a 2,200 N clamping force and a compact 0.31 kg construction delivers dependable, repeatable holding for jigs and fixtures; order the clamp directly via Metav Werkzeuge or consult the specialists if required. Toggle Latch Clamp 331 — Hook type, 2,200 N clamping force (Kukamet) A practical Toggle Latch Clamp 331 for horizontal-base fixtures, engineered to secure components rapidly and reliably in repetitive production and assembly tasks. Compact design, 0.31 kg Powerful clamping force 2,200 N Hooked toggle for secure closure Consistent clamping performance for series work This latch offers 2,200 N of clamping force and a 3,200 N holding capacity, values that ensure stable retention during machining, welding or assembly operations. The mechanical advantage of the toggle mechanism provides a secure closure with minimal operator effort, reducing setup time and the risk of part movement. For process planning, the clearly stated forces create a verifiable basis for selecting the right clamp for repetitive production runs, improving throughput and lowering scrap rates. Space-saving mounting with adjustable engagement Designed for a horizontal base mounting, the unit takes up little space on fixtures while delivering strong contact pressure. At only 0.31 kg, the clamp minimises added mass on moving jigs and is easier to position during assembly. The 75 mm thread length allows flexible adjustment of the hooked arm for varied part heights, while the hooked latch simplifies engagement with mating catches. The blackened finish provides basic surface protection and a professional appearance suitable for workshop environments. Rapid integration and low maintenance for everyday use The latch clamp is optimised for frequent open–close cycles where reliability matters. The toggle design translates operator motion into a positive locking action, enabling fast clamping and unclamping with consistent results. Its compact construction and standardised thread make incorporation into custom fixtures straightforward, and the simple mechanical layout keeps maintenance low: periodic inspection and lubrication are normally sufficient to preserve performance. This makes the component a pragmatic choice for engineering shops and production lines seeking durable, user-friendly workholding. Secure reliable fixturing with the Kukamet 331 — contact Metav Werkzeuge for supply and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B331-3 GTIN: 8680731508420 Model: 331 Facts Clamping force: 2,200 N Holding capacity: 3,200 N Weight: 0.31 kg Thread length: 75 mm Mounting: horizontal base eClass: 21041718 ETIM: EC011973 Special features Hooked latch Finish: blackened Category: Clamps Material indication: blackened/brüned surface FAQ What clamping force does this latch provide? The latch delivers a clamping force of 2,200 N and a holding capacity of 3,200 N, suitable for many light to medium-duty fixturing tasks with the Kukamet Toggle Latch Clamp 331 (SKU B331-3). Can the hooked arm be adjusted for different part heights? Yes, the hooked arm uses a threaded engagement with a 75 mm thread length, allowing adjustment to suit varying workpiece heights and ensuring secure closure. Is this clamp suitable for frequent cycle use in production? The toggle mechanism and robust construction are designed for repetitive use; the clamp provides rapid locking and low maintenance, making it appropriate for series assembly and jigs. How is the clamp mounted to a fixture? The unit is intended for a horizontal base mounting and can be fastened to jigs or plates using the standard mounting pattern; its compact footprint supports space-efficient fixture design. What surface protection is applied to the clamp? The component features a blackened finish, offering basic corrosion resistance and a professional appearance suitable for workshop and production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Horizontal Base With Safety Lock, Stainless Steel, 2.2kN Thrust, Hook - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines high clamping and holding forces with a secure safety lock for reliable fixture performance; order directly via Metav Werkzeuge or consult our specialists for application advice. Toggle latch clamp 351 (S351-3-L) — Stainless-steel horizontal-base clamp with safety lock by Kukamet A Toggle latch clamp 351 engineered for secure, repeatable clamping in industrial fixtures, featuring a horizontal mounting foot and integrated safety lock for vibration-prone environments Stainless-steel construction Safety locking mechanism Horizontal mounting foot High clamping force 2,200 N Secure holding where production tolerances matter The S351-3-L offers a dependable combination of 2,200 N clamping force and a maximum 3,200 N holding force, making it suitable for medium-duty fixturing where consistent contact pressure is essential. The clamp’s mechanism converts a short handle travel into a substantial axial force, providing repeatable results across batches. This mechanical advantage reduces the need for readjustment and supports smoother downstream processes by keeping components aligned during machining or assembly. Designed for safe, vibration-resistant operation A distinct benefit of this model is the integrated safety lock, which prevents unintentional opening under vibration or impact. Paired with the horizontal base mounting, the latch ensures secure engagement in jigs, conveyors and fixture plates. The locking feature simplifies workplace safety planning by providing a positive retention state; this reduces the risk of sudden release during handling and contributes to a lower incidence of scrap or rework in production runs. Fast installation and durable materials for long service life Constructed from stainless steel, the clamp resists corrosion in workshop environments and tolerates regular cleaning cycles without loss of function. Installation is straightforward: the clamp is secured via its horizontal mounting foot and the thread 75 mm accepts standard fasteners for rigid attachment. At a mass of 0.335 kg, the unit is light enough for retrofitting yet robust enough to deliver sustained performance, reducing the frequency of replacement and maintenance interventions. Practical advantages for workshop and industrial use As a toggle latch with hook and safety features, this model streamlines both manual and semi-automated handling operations by delivering precise engagement with minimal operator effort. The product’s mechanical design emphasises holding force and repeatability rather than electronic controls, which simplifies integration into existing fixtures and lowers lifecycle complexity. For manufacturers seeking cost-effective clamping that prioritises durability and consistent results, this clamp offers measurable operational benefits. Choose Kukamet quality for dependable fixture security — contact Metav Werkzeuge in Emmerich for product guidance and availability at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S351-3-L GTIN: 8680731506754 SKU: S351-3-L Manufacturer: Kukamet Numbers Max clamping force: 2,200 N Max holding force: 3,200 N Thread length: 75 mm Weight: 0.335 kg Special features Material: stainless steel Mounting: horizontal base Safety lock included With hook FAQ What is the maximum clamping force of this clamp? The maximum clamping force is 2,200 N for the Kukamet toggle latch clamp S351-3-L. Can the clamp remain locked during vibration or transport? Yes, the integrated safety lock on the S351-3-L prevents unintended release, ensuring secure retention under vibration. Is the clamp suitable for corrosive workshop environments? Made from stainless steel, the toggle latch clamp is designed to resist corrosion and tolerate routine cleaning. How is the clamp mounted to a fixture plate? The clamp uses a horizontal mounting foot and a threaded attachment (thread length 75 mm) for secure fastening to fixture plates. Does the product include a hook for engagement? This Kukamet model is supplied with a hook for positive engagement in latching applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Base With Hook, 2.2kN Thrust, 3.2kN Holding, Zinc Plated - Kukamet
Reliable workholding and corrosion resistance make for consistent jig performance; the combination of 2.2 kN clamping force and a zinc-plated finish ensures secure, long-lasting operation. Order the toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Toggle clamp 312 by Kukamet — vertical-base, zinc-plated hook model The Toggle clamp 312 is a vertical-base lever clamp designed for secure workholding in jigs, fixtures and production tooling. Vertical base for compact fixture integration Zinc-plated for corrosion resistance 2.2 kN clamping force, 3.2 kN holding power Integrated hook for fast engagement Dependable force where it matters The clamp delivers a 2.2 kN clamping force with a 3.2 kN holding power, providing measurable and repeatable results for assembly and machining operations. This level of force reduces slippage and maintains component position under load, so setups stay stable throughout the production cycle. The lever action converts operator motion into consistent clamping pressure, reducing setup time and increasing throughput in batch production or fixture work. Built to resist wear and fit tight spaces The zinc-plated surface protects against corrosion in workshop environments, extending service life without compromising mechanical function. The vertical-base design allows installation on narrow or densely populated fixture plates where horizontal mounts would not fit, enabling compact tool layouts and simpler fixture design. With a low mass of 0.335 kg and a short mounting footprint, the clamp integrates cleanly into existing jigs while maintaining robustness for daily industrial use. Practical features for faster operation Equipped with an integrated hook and a 75 mm thread length, the lever clamp offers quick engagement and straightforward height adjustment for a range of workpiece profiles. The hook version simplifies temporary holding and makes repetitive operations more efficient, while the threaded spindle permits fine tuning of contact height without additional shims. These practical details support a faster changeover and more ergonomic handling for operators on the shop floor. For reliable clamping from Kukamet and expert procurement support, contact Metav Werkzeuge — consult our Emmerich team for specification matching and secure supply to your workshop Technical Data Article number / SKU: 312-3 GTIN: 8680731502367 Manufacturer: Kukamet Material: Zinc-plated Mounting type: Vertical base Hook: Yes ECLASS: 21041718 ETIM: EC011973 Facts Max clamping force: 2200 N Max holding force: 3200 N Thread length: 75 mm Weight: 0.335 kg Special features Vertical base mounting Integrated hook for engagement Zinc-plated finish Lever-operated mechanism FAQ What is the maximum clamping and holding force of the clamp? The Kukamet toggle clamp 312 provides a maximum clamping force of 2.2 kN and a holding power of 3.2 kN, suitable for many workshop fixtures. Can the clamp be mounted on narrow fixture plates? Yes, the vertical-base configuration of this lever clamp is designed for compact fixture integration and tight installation spaces. Is the surface protected against corrosion? The clamp is zinc-plated, offering corrosion resistance appropriate for standard workshop and production environments. How is the clamping height adjusted? Height adjustment is achieved via the threaded spindle (75 mm thread length) and hook arrangement, enabling fine tuning of contact height without additional parts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Base With Safety Lock, 2.2kN Thrust / 3.2kN Hold - Kukamet
Take advantage of the combination of secure holding, compact vertical mounting and effortless repeatability for reliable clamping in production or workshop jigs. The integrated safety lock and robust mechanical design ensure secure engagement under load; order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. B312-3-L Latch Clamp (Toggle latch clamp) – Vertical base, safety lock (Kukamet) The B312-3-L latch clamp is a compact toggle latch clamp engineered for secure fastening of panels, fixtures and jigs, featuring a vertical mounting foot and an integrated safety lock for repeatable operation. Vertical base for compact mounting Built-in safety lock Hook included for secure engagement Holding force 3,200 N Consistent clamping performance for production use The clamp delivers a measurable clamping force of 2,200 N and a holding force of 3,200 N, values that support consistent fixture retention in repetitive workflows. Such quantifiable performance enables planners and production engineers to define safety factors and cycle procedures with confidence. The toggle mechanism converts operator input into high retention force, reducing slippage during handling and machining. Where predictable results are required, the mechanical advantage of this design minimises variations between operators and cycles, improving overall process reliability. Built-in safety features that protect assemblies Safety and secure engagement are prioritised by the integrated safety lock and the supplied hook which prevents accidental release under vibration or incidental contact. The latch incorporates a vertical-foot mounting arrangement that keeps the clamping plane compact, making it suitable for tight fixtures and assembly stations. The safety lock provides a tactile locking position so operators can verify engagement quickly; this reduces the risk of unsecured parts and supports safer machine loading and transport. Easy adjustment and integration into fixtures Adjustment is straightforward thanks to the thread length of 75 mm, which allows fine tuning of the engagement point and clamping travel without additional adaptors. The clamp’s modest mass and compact footprint make it simple to incorporate into existing jig plates or bespoke fixtures. The blackened surface finish offers a degree of corrosion resistance and a subdued appearance that blends with workshop tooling. For designers, the simple geometry and hook attachment permit rapid iteration of fixture layouts while keeping component count low. Durable construction for low-maintenance operation Manufactured with a focus on practical longevity, the clamp’s materials and finishes are selected to give long service life in workshop conditions. The mechanical toggle principle avoids electronic components, so there is no need for calibration or batteries; maintenance is limited to routine inspection and lubrication of pivot points. This straightforward construction reduces downtime and total cost of ownership in applications where reliable, repetitive clamping is required. Contact Metav Werkzeuge today to discuss how the Kukamet B312-3-L latch clamp can be specified for fixtures and jigs, or request tailored advice from our technical consultants at Metav Werkzeuge. Technical data Article number: B312-3-L GTIN: 8680731508345 SKU: B312-3-L Facts Max clamping force: 2,200 N Max holding force: 3,200 N Thread length: 75 mm Weight: 0.335 kg eClass: 21041718 ETIM: EC011973 Special features Material / finish: blackened finish Mounting: vertical base Includes hook With safety lock Category: Clamps FAQ What maximum holding and clamping forces does this latch provide? The Kukamet latch clamp B312-3-L offers a clamping force of 2,200 N and a holding force of 3,200 N, providing measurable retention for fixture applications. Is the clamp suitable for compact or tight fixture layouts? Yes, the vertical base design and compact footprint of the B312-3-L make it well suited to tight jigs and compact assembly fixtures. How is the engagement adjusted? Adjustment is achieved via the threaded engagement (thread length 75 mm), allowing precise setting of clamping travel without additional parts. Does the clamp include a means to prevent accidental release? The latch clamp is fitted with an integrated safety lock and a hook for secure engagement, reducing the chance of unintended opening under vibration. What maintenance is required for reliable operation? Routine inspection and occasional lubrication of pivot points are typically sufficient; the mechanical toggle design avoids electronics and simplifies upkeep. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Base With Safety Lock, 2.2kN Thrust, Zinc Plated Hook, 3.2kN Hold - Kukamet
Take advantage of a compact, corrosion-resistant latch clamp that combines robust holding force, a safety lock and a space-saving vertical mounting foot for reliable fixture closure — order the component directly via Metav Werkzeuge or consult our specialists for application advice. 312 Latch Clamp — Vertical-foot closure clamp with safety lock (Kukamet) The 312 latch clamp is a vertical-foot closure device designed for securing panels and fixtures in production and assembly environments, combining a compact footprint with a positive safety lock and a hook for fast engagement. Vertical-foot mounting Integrated safety lock Zinc-plated corrosion protection 2,200 N clamping force Reliable closure that protects the process The closure offers a consistent clamping action thanks to its lever-based mechanism, delivering a 2,200 N clamping force that secures workpieces without deformation. This level of force is suitable for repeatable fixture tasks where secure contact is essential; the distinct difference between the clamping and holding figures means the device both closes and retains assemblies under load. The safety lock adds a mechanical safeguard against accidental release, increasing operational safety in automated or manual workflows. Compact mounting with fast engagement Designed with a vertical foot for space-efficient installation, the clamp mounts vertically on tooling plates or frames and keeps the working area clear. The integrated hook and a thread length of 75 mm enable simple adjustment and rapid engagement, reducing setup times. At just 0.335 kg, the unit minimises added mass on moving fixtures while remaining robust enough for industrial use. Corrosion resistance and dependable materials Constructed with a zinc-plated finish, the clamp resists surface corrosion in typical workshop atmospheres, extending service life and reducing maintenance intervals. The device’s 3,200 N holding capacity provides a safety margin for dynamic forces that occur during machining or transport. For operators unfamiliar with these terms: clamping force refers to the active closing pressure, while holding force describes the maximum load that the closed clamp can resist without slipping. Practical benefits for workshop and production As a lever-style closure clamp, this model simplifies fixture design and shortens cycle times by enabling quick manual or pneumatic actuation. The mechanical safety lock supports compliance with shop-floor safety routines, and the zinc plating lowers lifecycle costs by decreasing corrosion-related replacements. The combination of compact form, reliable locking and measurable force ratings supports predictable, repeatable production results. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 312 latch clamp (SKU 312-3-L) into existing fixtures and to arrange fast dispatch from our Emmerich warehouse Technical data Article number: 312-3-L GTIN: 8680731502374 Manufacturer: Kukamet Facts Clamping force (max): 2,200 N Holding force (max): 3,200 N Weight: 0.335 kg Thread length: 75 mm Materials & features Material: zinc-plated Mounting: vertical foot Hook: yes Safety lock: yes Category: Clamps FAQ What clamping capacity does this latch clamp provide? The 312 latch clamp provides a maximum clamping force of 2,200 N and a holding capability of up to 3,200 N, suitable for secure fixture closing and retention. Is the clamp suitable for harsh workshop conditions? The zinc-plated finish on the Kukamet 312 offers corrosion resistance appropriate for standard workshop atmospheres and reduces the need for frequent replacements. How is the clamp mounted? Mounting is performed via a vertical foot, allowing compact installation on plates or frames; the unit includes a threaded adjustment with a 75 mm thread length. Does the clamp include a hook and a locking function? Yes, the closure clamp features an integrated hook and a mechanical safety lock for secure engagement and protection against unintended release. What is the weight of the unit and how does it affect fixtures? At 0.335 kg the clamp adds minimal mass to moving fixtures while remaining sturdy enough for repeated industrial use. Which SKU should be ordered for this model? Order the unit under SKU 312-3-L; the product is listed as the Kukamet 312 latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp Vertical Foot With Hook, 2.2kN Thrust, 3.2kN Holding, Stainless Steel - Kukamet
Combining stainless steel construction with a compact 0.31 kg body and a holding force of 3,200 N ensures reliable, corrosion-resistant clamping and long-term fixture stability. Order the clamp directly via Metav Werkzeuge or ask the consultants for application-specific advice. Toggle latch clamp 332 — vertical-foot lever clamp in stainless steel with hook and high holding force Toggle latch clamp 332 is a robust closure clamp designed for secure fixture locking and fast engagement in industrial and workshop environments Stainless steel construction Holding force 3,200 N Vertical-foot mounting option Integrated hook for quick engagement Consistent, measurable clamping performance for production use The clamp delivers a clear performance profile: a clamping force of 2,200 N during operation and a holding force of 3,200 N once engaged. The distinction is important: clamping force refers to the active force applied to create the closure, while holding force indicates the sustained resistance to part movement after locking. Such quantifiable values support predictable cycle times and repeatable results on jigs and fixtures, making this clamp suitable for assembly lines where component stability under load is critical. The stainless build keeps mechanical performance consistent under regular use. Space-saving mount that simplifies fixture design A vertical-foot mounting reduces the clamp’s footprint on the tooling surface and enables low-profile installations in confined spaces. With a thread length of 75 mm and a net mass of 0.31 kg, the unit is compact yet sturdy, allowing for straightforward integration into existing fixtures without heavy countermeasures. Short setup times are achieved thanks to the vertical base and standardised thread, which together facilitate rapid alignment and secure fastening on plates or rails. Corrosion resistance and quick-engage hook for demanding environments Constructed from stainless steel, the clamp resists rust and maintains surface integrity where humidity or coolants are present. The integrated hook provides an immediate mechanical engagement that reduces the risk of accidental release and speeds up manual or semi-automatic closing operations. This material choice lowers long-term maintenance requirements and supports applications in workshops, food-adjacent production zones or outdoor assemblies where exposure could otherwise degrade components. Designed to improve workflow and reduce setup interruptions The latch mechanism is tuned to provide firm locking with minimal overtravel, decreasing rework and the need for frequent retorquing. Compatibility with standard fixture dimensions and the clamp’s robust holding characteristics mean fewer clamps are needed to secure a workpiece, simplifying inventory and lowering changeover complexity. Where repeat accuracy matters—such as in welding jigs or inspection fixtures—this clamp promotes steady throughput and reduced downtime while supporting safer handling procedures. For robust, corrosion-resistant clamping from Kukamet, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S332-3 GTIN: 8680731509526 Manufacturer: Kukamet Facts Weight: 0.31 kg Thread length: 75 mm Clamping force (max): 2,200 N Holding force (max): 3,200 N eCl@ss: 21041718 ETIM: EC011973 Special features Material: stainless steel Vertical-foot mounting (senkrechter Fuß) With hook (integrated hook for engagement) Category: Spanner FAQ What is the difference between clamping force and holding force? Clamping force is the active force applied during engagement, while holding force is the sustained resistance once locked; the Toggle latch clamp 332 lists 2,200 N clamping and 3,200 N holding force for predictable fixture behaviour. Is the clamp suitable for corrosive or humid environments? Yes, the stainless steel construction of the latch clamp 332 provides corrosion resistance and reduced maintenance in damp or coolant-exposed workshop settings. How is the clamp mounted to a fixture? The clamp uses a vertical-foot mounting arrangement; the 75 mm thread length allows for standardised installation into plates or rails with secure fastening. Can the clamp be used for automated processes? The robust holding characteristics and repeatable engagement make the clamp appropriate for semi-automated jig operations; check the mechanical interface and stroke requirements against your automation setup. Which SKU should be ordered for this model? Order the unit under SKU S332-3; this identifier corresponds to the stainless steel toggle latch clamp with hook and the performance data listed above. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Toggle Clamp With Hook, Vertical Mount, 2.2kN Thrust, 3.2kN Holding, Zinc Plated - Kukamet
Take advantage of the combination of high holding force, corrosion-resistant finish and compact vertical-foot design for reliable, repeatable clamping in production and workshop assemblies. Order the clamp directly via Metav Werkzeuge or consult our team for specification support. 332 Toggle Latch Clamp with Hook – Vertical Foot, Zinc-Plated (Kukamet) A 332 toggle latch clamp engineered for secure closure and rapid engagement in jigs, fixtures and workshop assemblies. Zinc-plated steel construction Vertical-foot mounting for compact setups Integrated hook for secure latching Holds up to 3,200 N of retention force Secure retention for demanding closures The clamp delivers a holding force of 3,200 N and a closing force of 2,200 N, giving measurable assurance that components remain fixed under load. These two figures describe different functions: the closing force is the mechanical input generated when the lever is actuated, while the holding force is the sustained retention available once the hook is engaged. This distinction matters for engineers specifying fixtures where dynamic or vibration loads occur, as the high holding force reduces the risk of unintended release and supports consistent machining, welding or assembly operations. Space-saving mounting with adjustable installation Designed with a vertical-foot mounting, the mechanism occupies minimal horizontal space, making it suitable for tight fixture arrangements and stacked assemblies. The thread length 75 mm allows for adjustability during installation, so alignment can be fine-tuned without custom adapters. At only 0.31 kg, the unit adds negligible mass to moving subassemblies, which benefits automated or hand-guided systems where inertia and balance are considerations. Durable finish for workshop conditions The zinc-plated finish enhances resistance to corrosion in workshop and light industrial atmospheres, extending service life compared with bare steel. Zinc plating provides a sacrificial barrier that retards rust formation and eases maintenance cycles; it is therefore a practical choice where regular exposure to coolant mist, oil or humidity is expected but stainless steel is not required. The protective layer also supports reliable repeatability in clamping performance over time. Fast engagement and dependable levers Equipped with an integrated hook and lever-style toggle action, the design enables quick, one-handed engagement and a clear mechanical lock when closed. The toggle mechanism converts manual input into substantial holding capacity while maintaining a compact user stroke, which speeds up repetitive operations and improves ergonomics on the shop floor. This combination of rapid actuation and robust retention makes the clamp well suited for production fixtures, transport locks and repeatable assembly processes. For reliable closures in fixtures and jigs choose the Kukamet 332 toggle latch clamp — contact Metav Werkzeuge in Emmerich for specification advice or to request order details at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 332-3 GTIN: 8680731506051 Weight: 0.31 kg Material: Zinc-plated Mounting: Vertical foot With hook: Yes Facts Closing force max: 2,200 N Holding force max: 3,200 N Thread length: 75 mm Special features Lever-type toggle mechanism Compact vertical-foot design Integrated hook for secure latching Suitable for jig, fixture and assembly applications FAQ What holding and closing forces are specified for this clamp? The Kukamet 332 toggle latch clamp provides a holding force of 3,200 N and a closing force of 2,200 N, figures intended for specifying retention and actuation effort in fixtures. Is the finish suitable for workshop environments? The zinc-plated surface on the 332 clamp offers enhanced corrosion resistance for typical workshop and light industrial conditions, extending service life compared with untreated steel. How is the clamp mounted and adjusted? Mounting is via a vertical foot; the clamp features a thread length of 75 mm to facilitate alignment and adjustment during installation. Can the clamp be used for quick-release or repetitive operations? Yes — the lever-type toggle action combined with the integrated hook enables fast, repeatable engagement ideal for quick-release fixtures and high-cycle assembly tasks. Which SKU should be referenced when ordering? Reference SKU 332-3 for this toggle latch clamp when enquiring about the Kukamet model. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Tool Holder For Steel Turning Inserts 20mm Clamping Height - TECWERK
Take advantage of a compact quick-change system that combines reliable compatibility with Steel holder head A, a defined 20 mm clamping height and a short overall length for space-critical lathe setups; order the holder via Metav Werkzeuge or consult the Metav team for application advice. TECW ERK Quick-change holder for steel holder head A — 20 mm clamp height The TECW ERK Quick-change holder for steel holder head A is a compact toolholder designed to accept turning bars and to provide a stable clamping interface in confined lathe environments. Quick-change system for turning bars Compatible with steel holder head A 20 mm clamp height for consistent seating Compact overall length 75 mm for tight setups Minimise set-up variance with defined clamp geometry The holder’s 20 mm clamping height creates a consistent datum for tool seating, which is essential for repeatable turning operations and reduced set-up adjustments. With a defined seating plane, the risk of axial runout is lowered and tool repeatability is improved; this supports predictable machining tolerances and fewer trial cuts. The modular clamping interface is intended to be integrated into established tool stations, where reliable positioning shortens calibration time and helps maintain process stability. Fit into restricted toolpost spaces without compromise A short overall length of 75 mm enables installation in tight toolpost arrangements and minimises interference with workpiece fixtures. The compact form factor allows closer tool-to-tailstock setups and better access for coolant or chip evacuation, which can improve surface finish and extend insert life. Where machine envelopes are constrained, such a small footprint helps maintain flexibility in tool layout and reduces the need for workarounds that can slow production. Interchangeability for faster changeovers and workflow continuity Designed for turning bars and matched to Steel holder head A, the quick-change concept supports rapid tool swaps and straightforward reconfiguration of the tool carousel. Changeover times are reduced because the holder is compatible with a standard head interface, enabling consistent clamping behaviour across similar toolholders. This interchangeability is conducive to lean workflows, as fewer bespoke fixtures are required and tool inventory can be standardised for easier storage and replacement. Practical scope and workshop integration The toolholder is intended for use in conventional lathe toolposts where a fixed clamping height and compact length deliver repeatable results. Routine maintenance is straightforward since the mechanical interface is deliberately simple and robust; components that determine clamping behaviour are easily inspected and cleaned. Specifications such as the defined clamp height and overall length make the holder suitable for applications where predictable tool setting and minimal setup time are priorities. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK quick-change holder into workshop setups or request application-specific specifications via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832156NW SKU: 2000832156NW Product type: Quick-change holder Facts Overall length: 75 mm Clamp height: 20 mm Packaging unit: 1 Special features For turning bars Compatible with Steel holder head A Manufacturer: TECWERK FAQ How does the 20 mm clamp height affect repeatability? A defined 20 mm clamp height creates a consistent reference plane that improves repeatability by reducing variations in tool seating and minimizing axial runout for the TECW ERK quick-change holder. Is this holder suitable for compact lathe toolposts? Yes. The 75 mm overall length is designed for tight setups and allows installation in compact toolpost arrangements while maintaining secure clamping behaviour. Can the holder be used with other head types? The holder is specified for compatibility with Steel holder head A; use with other head types should only be considered if mechanical compatibility is confirmed. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
75mm Workshop Vise With 360° Swivel Base, 1300 Kgf Clamp Force - Vertex
Take advantage of a robust 1,300 kgf clamping force, a 0–75 mm jaw opening and a 360° rotatable base to streamline benchwork and small-scale machining tasks; order directly via Metav Werkzeuge or consult their technical advisors for specification checks and delivery options. Vertex BVV-3 Workshop Vice — 1,300 kgf clamping force, 360° rotatable base The BVV-3 is a compact workshop vice designed for secure clamping during general machining, assembly and repair tasks, featuring a 360° rotatable base for flexible positioning Robust 1,300 kgf clamping force 360° rotatable base for flexible setup 0–75 mm jaw opening Compact footprint 178 x 280 x 138 mm Precise, reliable clamping for everyday workshop tasks The combination of a high clamping force and a moderate jaw travel makes this vice especially suited to repetitive bench tasks where consistent grip is essential. The 1,300 kgf rating ensures a firm hold on components without frequent readjustment, reducing rework and saving time in small-batch production and repair workflows. The 0–75 mm jaw opening covers a broad range of common parts, from small brackets to medium-sized castings, allowing straightforward setup for most workshop jobs. Where unfamiliar terms occur, the clamping force indicates the maximum gripping capacity and the jaw opening the usable width between the jaws when fully retracted. Flexible positioning keeps setups efficient and ergonomic A 360° rotatable base provides rapid access to the workpiece from multiple angles without repeated re-clamping, improving ergonomics and cycle times on the bench. The design combines a stable base with rotational freedom, helping maintain alignment during milling, filing or drilling operations. With a compact footprint of 178 x 280 x 138 mm and a net weight of 6 kg, the vice offers a balance of stability and portability, suitable for fixed benches or mobile workstations where space is at a premium. The compact dimensions also simplify integration into existing jigs or fixtures. Built for dependable workshop performance and straightforward integration This bench vice supports consistent daily use thanks to its focused engineering: a solid clamping mechanism and a rotatable mounting that keeps setups repeatable and secure. The compact footprint and moderate mass mean the vice resists tipping and vibration under normal bench operations without requiring heavy anchoring. For specification checks, bespoke mounting advice or to confirm suitability for specific materials and tasks, Metav Werkzeuge’s technical team is available to advise on integration and compatibility so that the vice meets operational requirements with minimal adjustment. Speak to Metav Werkzeuge in Emmerich for tailored advice and reliable supply of the Vertex BVV-3 workshop vice and to arrange prompt fulfilment. Technical data Article number: BVV-3 GTIN: 4061905083389 ETIM: EC002173 ECLASS: 21020601 Facts Opening: 0–75 mm Clamping force: 1,300 kgf Dimensions: 178 x 280 x 138 mm Weight: 6 kg Special features Brand: Vertex 360° rotatable base Designed for general workshop clamping tasks FAQ What is the maximum jaw opening of the vice? The vice offers a jaw opening of 0–75 mm, enabling secure clamping of small to medium workpieces. How strong is the clamping capacity? The unit delivers a clamping force of 1,300 kgf, designed to hold components firmly during machining and assembly. Is the base rotatable and does it lock in place? Yes, the vice has a 360° rotatable base that permits flexible positioning; locking is provided to secure the required orientation during work. What are the dimensions and weight for bench planning? Dimensions are 178 x 280 x 138 mm with a weight of 6 kg, allowing straightforward bench integration and stable operation. Is this vice suitable for precision tasks on small components? The vice’s firm clamping and controlled jaw travel make it appropriate for many precision bench tasks; for highly specialised metrology fixtures, further discussion with Metav Werkzeuge is recommended. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75x100x75mm Precision Angle Clamp, ±0.005mm Accuracy, Alloy Steel 2.2kg - Vertex
Combining 0.005 mm metrological accuracy with a robust alloy steel design and a compact 75 x 100 x 75 mm footprint delivers repeatable, space‑efficient fixturing for precision machining and inspection. Order the VRS-33 directly via Metav Werkzeuge or consult our experts for application advice VRS-33 — Precision clamping angle, 0.005 mm accuracy (Vertex) the VRS-33 is a precision clamping angle designed for stable right‑angle fixturing in small‑part machining and metrology applications High accuracy 0.005 mm tolerance Robust alloy steel construction Compact 75 x 100 x 75 mm footprint Stable 2.2 kg mass for vibration damping Consistent tolerances for finished parts The VRS-33 provides a declared 0.005 mm accuracy, which translates into reliable squaring and repeatability when setting up workpieces for milling, drilling or inspection. This level of precision reduces the need for iterative adjustments on the machine and shortens setup cycles. The stated tolerance should be interpreted as the maximum deviation under normal operating conditions; in practice, the fixture supports high‑precision tasks where controlled geometries and consistent datum alignment are essential. Explanation of the figure: 0.005 mm denotes the permissible deviation from true 90° after manufacturing and quality control. Durable construction that supports process stability Manufactured from alloy steel, the unit combines structural rigidity with long service life. The dense material contributes to a higher mass for passive damping, which helps reduce vibrational influence during cutting operations and contributes to consistent finishes. The design focuses on secure clamping and stable contact surfaces; the construction therefore benefits both short production runs and repetitive tasks where fixture wear could otherwise affect accuracy. The robust build also eases handling during frequent mounting and demounting. Space-saving design with easy integration With compact dimensions of 75 x 100 x 75 mm and a mass of 2.2 kg, this clamping angle is suited to confined set‑ups and multi‑fixture arrangements on smaller machine beds. The reduced footprint allows closer packing of workholding devices while maintaining stable support for small to medium components. The moderate weight provides sufficient inertia for vibration damping without imposing excessive load on positioning stages or rotary fixtures. When paired with complementary tooling, the unit supports versatile fixturing strategies without consuming valuable bench or table space. Contact Metav Werkzeuge for tailored application advice and availability from our Emmerich stock: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data SKU: VRS-33 GTIN: 4061905083150 Manufacturer: Vertex Material: alloy steel Accuracy: 0.005 mm Dimensions: 75 x 100 x 75 mm Weight: 2.2 kg eClass: 21020601 Facts Accuracy: 0.005 mm Weight: 2.2 kg Dimensions: 75 x 100 x 75 mm GTIN: 4061905083150 Special features Product type: precision clamping angle Manufacturer: Vertex Compact, high‑rigidity design FAQ What level of angular accuracy can be expected from this clamping angle? The VRS-33 offers an indicated angular accuracy of 0.005 mm, providing high repeatability for right‑angle fixturing in both machining and inspection contexts. Which material is the VRS-33 made from and why does it matter? Constructed from alloy steel, the VRS-33 delivers structural rigidity and improved damping compared with lighter materials, which supports stable machining and longer service life. Is the VRS-33 suitable for use on smaller machine tables? Yes, the compact 75 x 100 x 75 mm format and 2.2 kg mass make the VRS-33 well suited to confined set‑ups and multi‑fixture arrangements on smaller tables. How does the clamping angle contribute to shorter setup times? By providing a precise, repeatable datum, the VRS-33 reduces the need for iterative alignment and corrective machining, accelerating the transition from setup to production. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75x164mm Hand Lubrication Pump 230cc, 15 Kg/cm² - Vertex
Take advantage of the combination of lever-operated precision, 230 cc capacity and a compact, lightweight design to keep lubrication tasks efficient and uninterrupted; order directly via Metav Werkzeuge or contact our consultants for specification support. LT-4 — Hand lubricant pump with lever action, compact 230 cc reservoir The LT-4 is a hand-operated lubricant pump with lever action designed for routine workshop and machinery maintenance where precise, portable lubrication is required. Hand-operated pump with lever action 230 cc reservoir for extended use 15 kg/cm² working pressure capacity Compact 75 x 164 mm, weight 0.7 kg Faster, more predictable lubrication for maintenance workflows The LT-4 lever-operated pump delivers a practical balance between reservoir size and portability. With a 230 cc reservoir and an efficient dispensing mechanism, the unit reduces refill frequency during repetitive maintenance tasks. The lever action provides controlled strokes for consistent output, which is particularly useful when servicing bearings, joints or small transmission components. The compact footprint and 0.7 kg mass keep handling effort low while the robust working pressure rating ensures the lubricant reaches seals and fittings reliably. Reach tight assemblies and maintain pressure where it matters Designed for workshop use, the pump generates up to 15 kg/cm² working pressure, making it suitable for pushing grease into confined spaces and couplings that require higher feed pressure. The measured 4 cc per stroke dosing enables repeatable lubrication cycles, aiding inventory planning and process documentation. For technicians and maintenance planners, this predictability translates into fewer interruptions and better control of lubricant consumption across scheduled servicing rounds. Practical design that supports everyday use and simple upkeep The hand pump’s compact dimensions (75 x 164 mm) and low weight make it easy to carry between workstations or to keep at a service bench without occupying valuable space. The lever-operated mechanism is straightforward to use and reduces operator fatigue during longer jobs. Visual inspection and basic cleaning are uncomplicated thanks to the accessible reservoir design and clear separation of moving parts, supporting fast turnaround in busy workshops while preserving operational readiness. For reliable, lever-operated lubrication solutions from Vertex, contact Metav Werkzeuge for purchasing advice and rapid delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific maintenance tasks Technical data Article number: LT-4 GTIN: 4061905083143 ECLASS: 23069090 Manufacturer: Vertex Facts Dimensions: 75 x 164 mm Capacity: 230 cc Weight: 0.7 kg Working pressure: 15 kg/cm² Dispensed quantity: 4 cc per stroke Special features Hand-operated lubricant pump Lever action for controlled dispensing Compact, workshop-friendly format Gallery image available (LT-4-detail.png) FAQ How much lubricant does the reservoir hold? The LT-4 reservoir holds 230 cc, providing extended intervals between refills for routine maintenance. What is the working pressure of the pump? The pump achieves up to 15 kg/cm² working pressure, allowing lubricant to be forced into tight fittings and seals. How much lubricant is dispensed per stroke? Each lever stroke of the LT-4 dispenses approximately 4 cc, enabling consistent and repeatable dosing. Is the LT-4 suitable for mobile workshop use? Yes, the LT-4’s compact size (75 x 164 mm) and 0.7 kg weight make it ideal for carrying between workstations or keeping at a service bench. Can the pump deliver precise lubrication for bearings and gearboxes? The lever-operated design and measurable 4 cc per stroke dosing of the LT-4 support controlled lubrication of bearings, couplings and small gearboxes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75x67x150mm Adjustable Jaw Chuck 900 kgf Clamping Force, Includes 2x M12x75L & 2x M12x125L - Vertex
Take advantage of the combination of high clamping force, compact footprint and robust construction for consistent workholding. Benefit from the adjustable design and included mounting bolts to reduce setup time. Order the FV-350 adjustable chuck jaws directly via Metav Werkzeuge or ask our consultants if needed. FV-350 Adjustable Chuck Jaws by Vertex — 900 kgf clamping force, compact size the FV-350 adjustable chuck jaws provide a versatile clamping solution for workshop and industrial setups, designed for reliable holding of medium to large workpieces 900 kgf clamping force for secure workholding Adjustable design for versatile clamping setups Compact dimensions: 75×67×150 mm Includes two M12x75L and two M12x125L Consistent high-force clamping for repeatable results The jaws deliver a rated 900 kgf clamping force, which translates into stable fixation during machining and grinding processes and reduces the risk of workpiece movement. The high clamping force is particularly valuable where precise tolerances matter: it minimises vibration and supports repeatable results across batches. With a mass of 7.5 kg, the device provides inherent stability on the chuck, improving overall machining accuracy without the need for additional mass. These characteristics make the component a dependable element in production workflows that demand consistent performance. Quick set-up and adaptable holding options Designed as an adjustable clamping system, the jaws allow quick repositioning and fine adjustment to match varied part geometries, cutting down non-productive time between jobs. The inclusion of mounting hardware — M12x75L and M12x125L bolts — means the unit can be fitted with standard tooling fixtures immediately, simplifying integration into existing chucks and fixtures. The compact footprint of 75 × 67 × 150 mm supports use in constrained setups where space is limited, while still offering sufficient bite depth for secure gripping. This combination of adaptability and fast mounting improves throughput and reduces setup complexity. Robust design and practical accessories for workshop use Manufactured for industrial use, the workholding jaws feature a construction aimed at durability and dependable service life under regular load cycles. The set comes complete with the specified fastening bolts, enabling straightforward installation and replacement of jaws when required. The product’s chuck jaws design focuses on practical usability: clear mechanical interfaces and standardised mounting reduce the need for special tools. Where predictable clamping and minimal rework are priorities, this workholding solution supports efficient processes and lowers the likelihood of downtime caused by insufficient gripping performance. For tailored advice or to request fast dispatch from Metav Werkzeuge in Emmerich, contact our specialists today by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav Werkzeuge supports precise procurement and reliable delivery across Europe Technical data Article number: FV-350 GTIN: 4061905084393 Eclass: 21029107 Facts Dimensions: 75 × 67 × 150 mm Weight: 7.5 kg Clamping force: 900 kgf Special features Adjustable chuck jaws Accessories included: 2x M12x75L, 2x M12x125L Manufacturer brand: Vertex FAQ What clamping force can be expected from these jaws? The FV-350 adjustable chuck jaws provide a rated clamping force of 900 kgf, ensuring secure fixation for machining and grinding operations. Are mounting bolts supplied with the jaws? Yes. The delivery includes two M12x75L and two M12x125L bolts for immediate installation. What are the overall dimensions and weight of the unit? The jaws measure 75 × 67 × 150 mm and weigh 7.5 kg, offering a compact yet stable workholding solution. Can these jaws be adjusted for different part geometries? The adjustable design of the FV-350 allows fine repositioning to match a variety of workpiece shapes and sizes, reducing set-up time. Is the FV-350 suitable for industrial production environments? Yes. The construction and clamping capacity of the FV-350 make it suitable for repeated use in workshop and industrial settings where reliable workholding is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
77mm Plate Lifting Magnet With Leather Strap 150N Holding Force - TECWERK
Take advantage of the compact design and reliable retention of this lifting magnet to speed handling of small ferrous plates while maintaining safe grip through the supplied leather strap; order directly via Metav Werkzeuge or contact their consultants for application advice. Plate hand lifting magnet L77 x W37 x H14.5 mm with leather strap, 0.15 kN (TECWERK) Plate hand lifting magnet L77 x W37 x H14.5 mm with leather strap, 0.15 kN is a compact manual lifting aid for handling small ferrous sheets and components in workshop environments Compact dimensions 77 x 37 x 14.5 mm Leather strap for secure handling Holding force up to 150 N Suitable for sheet thickness from 2 mm Faster handling of small ferrous parts with predictable retention The compact lifting magnet delivers a consistent holding force that simplifies short-distance handling and positioning tasks. With external dimensions of 77 x 37 x 14.5 mm, the unit fits into confined work areas and on small benches where larger devices would be impractical. The specified maximum holding force of 150 N (0.15 kN) provides a clear, quantifiable performance figure that supports planning of manual handling processes and reduces handling time in repetitive tasks. By stating the retention value explicitly for thin material conditions, the specification enables pragmatic selection and integration into existing workflows. Secure grip and safer handling thanks to the leather strap Equipped with a leather strap, the tool offers improved manual control during lifting and transfer operations; the strap reduces the risk of slippage and allows a steady grip when manoeuvring small plates. The combination of a dedicated strap and compact geometry reduces hand fatigue during repeated cycles and supports safer, more controlled handling in assembly and maintenance applications. Where consistency matters, the visible mechanical retention figure and the strap together help ensure repeatable results when placing or removing components. Clear material suitability and application guidance Technical notes attached to the product indicate a suitable sheet thickness from 2 mm, while the stated retention data refers to conditions at 1 mm for reference. This distinction aids selection: the tool is intended for relatively thin ferrous plates but performs reliably once minimum thickness is observed. The transparent specification supports risk-aware use in light fabrication, repairs and small-part logistics, where predictable magnetic grip is needed rather than heavy lifting capacity. Compact design that supports workshop efficiency The small footprint of the device makes it particularly useful where space is limited or where multiple items must be handled in close proximity. The design reduces obstruction on workbenches and allows rapid placement and retrieval of parts without complex handling fixtures. As a straightforward manual aid, the magnet contributes to smoother workflows and faster cycle times in repetitive tasks, delivering a measurable productivity benefit for small-batch or shop-floor operations. Contact Metav Werkzeuge for tailored advice on application suitability and supply; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss this TECWERK lifting magnet and delivery from Emmerich Technical data Article number: 4000832301NW Product type: Plate hand lifting magnet Brand: TECWERK Execution: with leather strap Packing unit: 1 Core data Dimensions: 77 x 37 x 14.5 mm Total height: 14.5 mm Maximum holding force: 150 N Specified holding force reference: at 1 mm sheet thickness Suitable sheet thickness: from 2 mm Special features Leather strap included Compact form factor for confined spaces Manual, non-powered operation FAQ What is the maximum holding force of this lifting magnet? The TECWERK plate hand lifting magnet has a maximum holding force of 150 N (0.15 kN) as specified for reference conditions. Which sheet thicknesses are suitable for use? The unit is designed for sheet thicknesses from 2 mm, with the manufacturer providing retention data referenced at 1 mm for comparative purposes. Is a leather strap included and how does it help? Yes, the device is supplied with a leather strap, which improves grip and handling safety when moving or positioning small ferrous plates. Can the magnet be used for heavy lifting tasks? This compact hand-held magnet is intended for light handling and positioning; the 150 N rating defines its practical limit and is not suitable for heavy lifting applications. What is the SKU for ordering or reference? Reference SKU: 4000832301NW for procurement and technical enquiries. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
77x181x110mm V-Block Prism, Fine-Grain Cast Iron, Accuracy 0.05mm, 12kg - Vertex
Combining 0.05 mm accuracy with a 12 kg mass for stable, repeatable positioning, this V‑block ensures dependable alignment in inspection and machining setups. Order the V‑7V directly via Metav Werkzeuge or contact our consultants for specification support and delivery from Emmerich. V-7V V-block by Vertex — fine-grain cast iron, 0.05 mm accuracy A V-block V-7V designed for secure, repeatable workholding of cylindrical components during measurement and machining operations. Fine-grain cast iron construction Accuracy 0.05 mm for precise alignment Stable 12 kg mass for vibration damping Compact 77 x 181 x 110 mm footprint Precise alignment for reliable measurement results The V‑7V delivers 0.05 mm accuracy, making it suitable where tight tolerances are required. The defined V‑groove geometry centres round workpieces and minimises lateral movement, enabling consistent repeatability when setting up indicators or precision calipers. By translating the numerical tolerance into predictable positioning, the block reduces setup time and the need for iterative adjustments, directly supporting efficient quality control procedures. Mass and material that improve stability and longevity Constructed from fine-grain cast iron, the block combines inherent damping properties with dimensional stability under normal workshop conditions. The substantial 12 kg mass absorbs cutting and measuring vibrations, which improves surface contact and stability during inspection or light machining tasks. The material selection and mass together promote long service life and help maintain alignment, reducing the frequency of recalibration in daily use. Compact footprint for flexible workshop integration With a compact dimension of 77 x 181 x 110 mm, this prism block fits easily on measurement tables and small machine beds while still accommodating a wide range of cylindrical parts. The solid design supports fixed-angle clamping and simple fixturing with standard clamps or stop blocks, facilitating seamless integration into existing workflows. Whether used for bench inspection or as an intermediary workholding aid during secondary operations, the component offers practical versatility and straightforward handling. Contact Metav Werkzeuge in Emmerich for tailored advice on specifying the Vertex V-7V V-block and secure supply directly from our European quality hub (info@metav-werkzeuge.com) Technical data Article number: V-7V GTIN: 4061905090158 ECLASS: 21160304 Core technical data Dimensions: 77 x 181 x 110 mm Weight: 12 kg Accuracy: 0.05 Special features Material: fine-grain cast iron Manufacturer: Vertex SKU: V-7V FAQ What level of accuracy can be expected from this V-block? The V‑7V V-block from Vertex provides an accuracy of 0.05 mm, making it suitable for precision alignment and repeatable measurement tasks. What material is the prism block made from and why does it matter? The prism block is made from fine-grain cast iron, which offers good vibration damping and dimensional stability; this enhances repeatability and durability in workshop environments. What are the physical dimensions and how do they affect use? The compact footprint of 77 x 181 x 110 mm means the block fits comfortably on measurement benches and small machine tables, allowing flexible positioning for small to medium cylindrical parts. Is the V-7V suitable for inspection and machining setups? Yes, the Vertex V-7V V-block is designed for secure positioning during inspection and light machining operations, supporting precise centring and consistent fixturing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
78mm ER-50 Collet Chuck For ER Collets, Morse Taper Mount - Vertex
Take advantage of precise clamping, simple integration with Morse taper spindles and robust build quality for uninterrupted machining. Order the collet chuck directly via Metav Werkzeuge or contact the consultants for application advice. Collet chuck V-411 — ER collet compatibility, ER-50, 78 mm diameter (Vertex) V-411 is a compact collet chuck designed for secure clamping of ER collets with a Morse taper mounting, suitable for turning and milling spindles ER collet compatibility ER-50 78 mm external diameter Morse taper mounting for direct spindle fit Robust 2.9 kg construction Consistent clamping accuracy for reliable machining The design delivers repeatable clamping that reduces setup time and scrap rates. By using standard ER collets, the chuck provides concentricity and grip suited to high-precision operations; this benefits tasks where tool runout and workpiece wobble must be minimised. The interface is engineered for secure axial and radial retention, so components stay stable during interrupted cuts and high-torque feeds. As a result, process reliability improves and downstream measuring and finishing steps require fewer corrections. Effortless integration with Morse taper spindles Fitted for a Morse taper mounting, the chuck installs directly into conventional machine spindles without additional adapters. The ER-50 collet system is compatible with a wide range of ER sizes, enabling quick tool or workpiece changes while maintaining clamping force and alignment. This direct-mount approach shortens changeover times and supports lean workflows in production environments. Clear labelling of the interface and standard conformity make verification and replacement straightforward for maintenance staff. Durable construction to withstand shop-floor demands Constructed with a focus on longevity, the chuck’s robust construction and balanced geometry reduce vibration and wear. The measured 78 mm external diameter and a mass of 2.9 kg contribute to stability during sustained cycles. Where continuous operation is required, this solidity translates into longer service intervals and more consistent part quality. For mixed-production shops, the combination of standard ER collets and a heavy-duty mounting minimises the need for multiple specialised fixtures, supporting efficient use of inventory. Contact Metav Werkzeuge for compatibility checks, application recommendations and ordering assistance — our Emmerich-based team acts as the quality filter for European workshops and will advise on the right accessories for the Vertex V-411 collet chuck Technical Data Article number: V-411 GTIN: 4061905085925 Manufacturer: Vertex Diameter: 78 mm Weight: 2.9 kg Collet system: ER collets (ER-50) Mounting: Morse taper (MK) Facts eClass: 21020405 Mass: 2.9 kg External diameter: 78 mm Special features Compatible with ER collets ER-50 size specification Morse taper mounting for direct spindle fit Designed for turning and milling spindle use FAQ What collet system does this chuck use? The V-411 collet chuck uses the ER collet system and is specified for ER-50 format, compatible with standard ER collets. Which mounting does the chuck require? The chuck is designed for a Morse taper (MK) mounting to fit directly into suitably prepared spindles. Is the chuck suitable for production environments? Yes, the robust build and balanced geometry of the Vertex V-411 collet chuck make it suitable for continuous production use and repeatable clamping. What is the external diameter and mass of the chuck? External diameter is 78 mm and mass is 2.9 kg, which contributes to stability during machining. Can the chuck be used with standard ER collets of different sizes? The chuck accepts ER collets; the ER-50 specification allows use of the corresponding range of ER collet sizes for flexible clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
78mm ER-50 Collet Chuck MT-4 For ER Collets — Vertex
Take advantage of precision clamping for ER-50 collets combined with a secure MT-4 taper interface and a compact 78 mm diameter to improve consistency on production runs; order directly via Metav Werkzeuge or consult our technical team for application advice. V-409 Collet chuck – ER-50 collet system with MT-4 taper, 78 mm V-409 collet chuck for ER-50 collets, designed for secure clamping in machines with an MT-4 taper and compact external dimensions. Precise clamping for ER-50 collets MT-4 taper for straightforward spindle mounting 78 mm external diameter Solid 2.2 kg construction Consistent clamping for repeatable results The V-409 is engineered to provide precision clamping for ER collet tooling, ensuring repeatable concentricity and dependable tool holding across batches. By using the widely adopted ER-50 collet system, the chuck maintains tight tolerances during machining, which reduces rework and improves first-pass yield. The design focuses on delivering high repeatability, making it suitable for workshops that demand predictable outcome and minimal inspection overhead. Easy integration with standard taper spindles A dedicated MT-4 taper ensures a straightforward and secure connection to compatible spindles, simplifying machine set-up and tool changes. The taper interface is designed to seat reliably, transferring torque and axial loads without unnecessary play. This seamless integration reduces downtime during tooling swaps and supports efficient changeover procedures in both single-part and small-series production environments. Robust dimensions for workshop use With a compact 78 mm external diameter and a weight of 2.2 kg, the chuck offers a balance between rigidity and manageable mass, suitable for a wide range of machining centres and toolroom lathes. The measured build provides stable support for ER collets while keeping the overall tool envelope modest, which helps preserve clearance and access in crowded spindle noses. The result is a robust construction that withstands daily workshop demands without excessive bulk. Practical advantages for everyday machining Employing an ER-50 compatible chuck reduces the number of specialised holders required while enabling fine adjustment of clamping diameters with standard collets. The compact form factor and taper mounting contribute to reduced set-up time and steadier machining conditions, which together increase throughput and lower per-part labour. For operations prioritising consistent cycle times and reliable clamping, this solution offers measurable productivity benefits. Choose Vertex quality for dependable clamping — contact Metav Werkzeuge in Emmerich for an expert assessment or to arrange a supply of the V-409 collet chuck via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: V-409 GTIN: 4061905087479 Manufacturer: Vertex Facts External diameter: 78 mm Weight: 2.2 kg Collet system: ER-50 Taper: MT-4 Special features For ER collets with MT-4 taper mounting Compact external diameter for restricted spaces Designed for consistent clamping and repeatability FAQ What collet system does this chuck use? The V-409 collet chuck uses the ER-50 collet system, compatible with standard ER-50 collets. Which spindle taper is required for mounting? Mounting is via an MT-4 taper, allowing installation in spindles designed for MT-4 tooling. Is the chuck suitable for high-production workshops? Yes, the V-409 from Vertex is built for reliable, repeatable clamping that supports steady production workflows. What are the external dimensions and weight? The chuck has an external diameter of 78 mm and a weight of 2.2 kg. Can standard ER collets be used with this chuck? Standard ER-50 collets are compatible with the V-409, enabling flexible clamping ranges with off-the-shelf collets. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
78mm ER-50 Collet Chuck, 2 kg - Vertex
Spannzangenfutter — Collet Chuck Spannzangenfutter Collet Chuck for precision toolholding in machine shops and toolroom applications, designed to secure cutting tools with consistent concentricity and dependable clamping force. ER-50 taper for robust clamping 78 mm Diameter for compact mounting Lightweight at 2 kg for easy handling Compatible with standard toolholders Precise concentricity for high-accuracy machining Exceptional precision for repeatable results The Spannzangenfutter is engineered to deliver consistent concentricity and repeatable clamping, making it a reliable choice where Accuracy matters. Built around the ER-50 taper, the Collet Chuck minimises runout and supports high-speed machining operations. Its compact 78 mm Diameter and balanced design reduce vibration, which translates into improved Surface Finish and longer tool life. For workshops seeking measurable performance gains, this toolholder offers a direct improvement in process stability and component Quality. Practical design that eases everyday use This Collet Chuck combines functional simplicity with robust construction to reduce setup time and handling effort. With a Weight of 2 kg, the unit is easy to fit and remove, while remaining sturdy during machining. The ER-50 system enables fast collet changes and broad tool compatibility, reducing idle time between operations. The straightforward geometry means less maintenance and fewer alignment checks—benefits that support higher throughput in busy production environments and make the toolholder particularly suited to small and medium-sized enterprises looking to increase Efficiency. Who benefits and where it excels Toolrooms, CNC workshops and maintenance departments will appreciate the clear advantages in repeatability and handling. The V-105 Collet Chuck is appropriate for general milling and drilling setups where precise toolholding is required without overcomplication. Because the design focuses on mechanical reliability rather than electrical features, it is ideal for environments that value straightforward, low-failure tooling solutions. Operators will notice fewer adjustments and more predictability in cycle-to-cycle results, which supports consistent Quality control. Why choose Metav and Vertex for your tooling needs Metav stands for the democratisation of Precision: supplying accurate measuring and tooling solutions that are affordable for every workshop while acting as a quality filter for the European market. With a long-standing partnership approach and an extensive range of products, Metav ensures reliable supply and informed advice from its base in Emmerich. Choosing the Vertex Collet Chuck through Metav combines Vertex engineering with a supply chain focused on trust, stock availability and service continuity for industry and trade. Choose the Vertex Collet Chuck V-105 for superior clamping precision and contact Metav for tailored technical advice and reliable supply from Emmerich — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Product Features Article number: V-105 Brand: Vertex Product: Spannzangenfutter (Collet Chuck) Taper: ER-50 Diameter: 78 mm Weight: 2 kg Facts Diameter: 78 mm Weight: 2 kg Features Kegel: ER-50 SKU: V-105 eClass: 21020405 FAQ What taper does this collet chuck use? The Vertex Spannzangenfutter V-105 uses an ER-50 taper, providing robust clamping suitable for many standard collet sizes and ensuring reliable tool retention during machining. Is the Collet Chuck suitable for high-speed milling? Yes, the Vertex Collet Chuck (Spannzangenfutter) V-105 is designed with balanced geometry and precise concentricity, making it appropriate for many high-speed operations where reduced vibration is essential. How heavy is the V-105 and does weight affect handling? The V-105 Collet Chuck weighs 2 kg, which offers a good balance between sturdy performance and easy handling during setup and tool changes. What diameter is the chuck and how does that affect mounting? This collet chuck has a 78 mm Diameter, allowing compact mounting arrangements and compatibility with a wide range of standard toolholders used in workshop environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
78mm ER-50 Collet Chuck, 4 kg, ER50 Mount - Vertex
Take advantage of precise clamping, a standard ER-50 taper and a compact 78 mm design for stable machining. Order the tool holder directly via Metav Werkzeuge or request expert advice from our consultants. V-108 collet chuck by Vertex — ER-50 taper, 78 mm diameter The V-108 collet chuck is a precision tool holder designed for secure clamping in demanding machining and toolholding applications, featuring an ER-50 taper and a 78 mm outer diameter for enhanced stability ER-50 taper for standard toolholders 78 mm outer diameter for robust gripping 4 kg weight for stable machining Reliable clamping for consistent cycle times The ER-50 taper form delivers a standardised interface that supports repeatable seating and stable transmission of spindle forces, ensuring consistent clamping across production runs. With a 78 mm outer diameter and a mass of 4 kg, the tool holder adds inertial stability that reduces vibration and helps maintain cutting accuracy. These characteristics result in measurable benefits at the shop floor level: shorter setup validation, fewer rejected parts and steadier surface finishes. The compact construction of the collet system also facilitates reliable concentricity, making it suitable where precision and repeatability matter most. Compatibility and practical toolholding advantages Designed around the ER-50 collet family, the chuck accepts common ER collets and integrates with standard spindle tapers and toolholder setups. This compatibility streamlines tool inventory and simplifies changeover procedures, supporting efficient workshop logistics. The collet-based clamping provides uniform radial pressure, which reduces tool runout compared with many clamping alternatives and improves tool life under comparable cutting conditions. For operations that demand steady performance, the design supports stable torque transfer and predictable behaviour during both light finishing and heavier roughing cycles. Robust design that eases daily operation While specific material specifications are not listed, the mechanical concept focuses on durability and serviceability. The geometry and mass distribution contribute to robust performance under continuous use, while the standard ER-50 interface eases replacement or upgrade of collets and accessories. Routine maintenance is straightforward: keep the taper and collet contact surfaces clean, inspect for wear, and ensure correct assembly torque. These simple practices preserve concentricity and extend service intervals, translating into lower downtime and a reliable toolholding solution for daily production demands. Short setup, long-term value in the workflow Integration into existing workstations is fast due to the standardised taper and widely available collets, allowing machine shops to reduce the number of specialised holders required. The collet chuck’s combination of precision and stability supports predictable cycle times and fewer adjustments at the machine, which in turn lowers indirect costs and increases throughput. For procurement and planning, choosing a standardised ER-50 tool holder simplifies spare-part strategies and harmonises tooling across multiple machines, supporting efficient stock management and smoother production planning. For reliable ER-50 toolholding from Vertex, contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: V-108 GTIN: 4061905086922 EClass: 21020405 Facts Outer diameter: 78 mm Weight: 4 kg Taper standard: ER-50 Special features Taper: ER-50 Manufacturer: Vertex Image asset available FAQ Which collet family fits this chuck? The chuck accepts ER-50 collets; matching ER collets should be used to achieve rated concentricity with the V-108 collet chuck. Is the V-108 suitable for CNC machining centres? Yes, the V-108 collet chuck is designed around the ER-50 taper, a common standard for CNC toolholding and workshop spindles. How should the tool holder be maintained for best performance? Regularly clean the taper and collet surfaces, inspect for wear, and assemble with the correct tightening practice to preserve concentric clamping and prolong service life. What benefit does the 78 mm diameter provide? The 78 mm outer diameter contributes to increased stability and inertial mass, helping to reduce vibration and support accurate machining results. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
79mm Centre Cone MK3 Taper 60° Sharp Tip, Housing Ø56mm, Max Workpiece 400kg - RÖHM
Take advantage of precise centring with a robust rotating design: the combination of an MK3 shank, 60° cone angle and a 79 mm projection delivers reliable alignment and reduced setup time for turning operations; order the centring cone directly via Metav Werkzeuge or consult our specialists for selection and delivery. RÖHM centring cone MK3, projection 79 mm — rotating pointed form, 60° cone angle A RÖHM centring cone MK3 engineered for precise workpiece alignment in lathe and turning-centre applications, featuring a pointed rotating form and a 60° cone angle for secure, repeatable centring. MK3 shank for standard Morse taper fittings 60° pointed cone for secure centring 79 mm projection for deep workpiece reach Supports workpieces up to 400 kg Accurate centring that reduces rework and increases throughput The rotating pointed form with a 60° cone angle provides a consistent contact geometry that minimises runout and improves concentricity. Fitted with an MK3 shank (Morse taper 3), this centring solution is suitable for standard toolholders and tailstocks, enabling quick integration into existing setups. The precision of the contact surface reduces the need for repeated alignment checks, which in turn shortens setup times and supports higher manufacturing throughput without compromising component quality. Robust support for heavy and extended components A solid housing with a 56 mm diameter and a projection of 79 mm extends reach into deeper workpieces while maintaining stability. The centring cone is specified to support workpieces up to 400 kg, making it appropriate for medium to heavy turning tasks where reliable load capacity is essential. The mechanical design focuses on rigidity and load distribution, so fixtures remain secure during machining and the risk of deflection under load is reduced. Compatibility, integration and low maintenance handling Designed to fit common Morse taper systems, the device offers straightforward integration with standard lathes and turning centres; the MK3 interface enables interchangeability with existing tooling. The rotating centre form reduces frictional heating at the contact point and minimises marking on softer materials, helping to preserve surface finish. Routine maintenance is limited to periodic inspection and lubrication of bearings where applicable, ensuring long service intervals and stable performance in production environments. Contact Metav Werkzeuge to secure expert advice on selecting the right RÖHM centring cone MK3 for specific turning applications and to arrange fast delivery from Emmerich. Technical Data Article number: 4000832105NW Manufacturer: RÖHM Product type: Centring cone Packaging unit: 1 Facts Projection: 79 mm Cone angle: 60° Housing diameter: 56 mm Max. workpiece weight: 400 kg Special features MK3 shank (Morse taper 3) Rotating pointed form Suitable for lathe and turning-centre applications FAQ What taper does the centring cone use? The RÖHM centring cone uses an MK3 shank (Morse taper 3) for direct fitting into compatible tailstocks and toolholders (SKU 4000832105NW). Which cone angle is specified and why does it matter? A 60° cone angle is specified; this geometry provides a stable, well-centred contact surface that improves concentricity and reduces workpiece runout. How deep can the cone reach into a workpiece? The unit offers a 79 mm projection, which allows access to deeper bores and extended components while maintaining centring accuracy. What load can the centring cone support? The design supports workpieces up to 400 kg, suitable for medium to heavy turning operations where robust support is required. Is the centring cone compatible with standard lathes? Yes, the MK3 interface and rotating pointed form are compatible with standard lathe tailstocks and turning centres; the form also helps reduce marking on the workpiece surface. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
79mm Synchronised Threading Chuck ER16-GB With Coolant Feed, 0.5mm Axial Compensation, DIN 69871 Form A - TECWERK
Take advantage of a tool that combines axial compensation and an integrated coolant feed to maintain thread quality and reduce scrap during synchronised tapping; the unit’s high runout accuracy and strong clamping capability support reliable production cycles — order the TECWERK synchronised tapping chuck through Metav Werkzeuge or consult the Metav team for application advice. TECWERK Synchronised Thread‑cutting Chuck (DIN 69871 AD/B, SK40) with coolant feed and axial compensation The TECWERK synchronised thread‑cutting chuck is a precision clamping unit for CNC machines with synchronised tapping spindles, designed to handle metric threads in the M3–M12 range while compensating for minor pitch or synchronisation discrepancies. Synchronised tapping for M3–M12 threads Axial compensation ±0.5 mm for sync errors Integrated coolant feed for through‑tool cooling High runout accuracy and strong clamping force Precision tapping that reduces scrap and cycle variability The chuck delivers repeatable thread quality by combining a precisely machined clamping interface with axial compensation capable of absorbing synchronisation deviations of ±0.5 mm. This mechanical compensation means fewer broken taps and reduced rework in short‑cycle CNC tapping operations, particularly where minor spindle synchronisation drift occurs. The specification to DIN 69871 and the compact ER16 interface ensure the unit fits standard synchronised tapping spindles, translating technical conformity into operational reliability on the shop floor. Built‑in coolant routing for improved tool life and finish An integrated coolant feed supplies lubricant and cooling directly to the cutting zone, supporting longer tool life and superior surface finish when cutting internal threads from M3 to M12. For materials and operations where heat and chip evacuation are critical, through‑tool coolant reduces thermal expansion and chip packing, thereby preserving thread geometry and sustaining consistent torque profiles. The combination of coolant delivery with high runout accuracy contributes directly to process stability and predictable maintenance intervals. Compatibility, clamping force and application scope Engineered for CNC machines equipped for synchronised tapping, the unit mates to standard spindle interfaces conforming to DIN 69871 AD/B and uses an ER16‑GB connection for the tap collet. The compact 22 mm outer diameter and 79 mm length (A) keep the tool assembly compact while maintaining high clamping force through the tensioned tap collet with integrated square, enabling secure retention of taps for both right‑ and left‑hand threads. This construction is particularly suitable for small to medium thread series where fast indexing and consistent torque transfer are required. Practical sourcing and supply reliability for production use Metav’s procurement and distribution model ensures that devices like this synchronised tapping chuck are available with transparent logistics from Emmerich, backed by decades of experience in precision tooling. Combining verified technical data with stable stock handling reduces lead‑time uncertainty and supports uninterrupted production planning. For complex installations or to confirm machine compatibility, technical clarification is available from Metav Werkzeuge to ensure the chuck integrates smoothly into existing tapping cells. Contact Metav Werkzeuge to discuss integration of the TECWERK synchronised tapping chuck into existing CNC tapping lines or to request application‑specific data and sourcing from Emmerich Technical data Article number: 2000834914NW Product: Synchronised thread‑cutting chuck Brand: TECWERK Connection: ER16‑GB Standard: DIN 69871 AD/B Core data Outer diameter: 22 mm Length (A): 79 mm Axial compensation (longitudinal): -/+ 0.5 mm Thread range: M3–M12 Special features Integrated coolant feed Compensates synchronisation errors under push and pull Suitable for right‑ and left‑hand threads High runout accuracy High clamping force via tensioned tap collets with integrated square FAQ What thread sizes does the chuck support? The TECWERK synchronised thread‑cutting chuck supports thread sizes from M3 to M12, as stated in the product specification (SKU 2000834914NW). Can left‑hand threads be produced with this unit? Yes. The chuck is specified for both right‑ and left‑hand threads and handles reversing tapping operations when fitted to a compatible synchronised spindle. How much axial compensation does the chuck provide? Axial compensation is ±0.5 mm, allowing the unit to absorb minor synchronisation discrepancies between the tap and the synchronised spindle. Which machine interfaces are required? The chuck conforms to DIN 69871 AD/B with an ER16‑GB connection, making it suitable for CNC machines equipped with synchronised tapping spindles matching those standards. Does the chuck supply coolant to the tool? Yes. The unit features an integrated coolant feed to support through‑tool lubrication and improved chip evacuation during threading operations. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
7kg Horizontal Base Quick-Action Toggle Clamp, Screw Clamp Style, 1000N Thrust / 2500N Holding - Kukamet
The robust combination of galvanised construction, a horizontal foot for secure mounting and a 2,500 N holding force ensures stable, repeatable clamping in production and workshop environments. Order the quick clamp directly via Metav Werkzeuge or consult our specialists for specification support. Kukamet 811 Quick Clamp — galvanised lever clamp with horizontal foot and 2,500 N holding force The Kukamet 811 Quick Clamp is a lever-operated clamping solution designed for industrial fixturing and heavy-duty workshop applications, offering reliable holding capacity and corrosion-resistant construction. Galvanised steel construction for corrosion resistance Horizontal foot mounting for secure bench attachment 2,500 N maximum holding force for heavy fixtures 1,000 N clamping force for reliable pressure Robust 7 kg body for stable clamping Durable construction for long service life The clamp is built from galvanised steel, providing corrosion protection where wet or variable environments occur; this surface finish reduces maintenance intervals and extends component lifetime. The heavy-bodied design contributes to stable clamping, minimising vibration during machining or assembly. With a focus on robustness rather than lightweight convenience, this tool suits benches and jigs where permanence and strength are priorities. Consistent performance and measurable holding power Engineered for repeatable results, the device delivers a holding force of 2,500 N and a clamping force of 1,000 N, values that support securing medium to heavy workpieces without slipping. These numerical specifications enable planners and engineers to assess suitability for specific setups and calculate safety margins. Where repeatability is required across multiple cycles, the lever mechanism gives consistent clamp pressure with straightforward visual verification. Practical mounting and ergonomic operation A horizontal foot attachment provides a low-profile mounting option that integrates easily into fixture plates and workbenches, keeping the clamp body clear of overhead interference. The lever-operated action allows rapid engagement and release, reducing cycle times in repetitive tasks. Because the unit is supplied as a self-contained clamp, installation involves simple bolting to the work surface and immediate commissioning for production use. Typical applications and compatibility Designed for general workshop and industrial fixturing, the clamp is suitable for use in assembly jigs, test rigs and fixture systems where a dependable quick-action hold is needed. The screw-clamp style configuration gives compatibility with screw-jawed fixtures and standard bench arrangements. Its sturdy mass and mounting method make it a practical choice for permanent or semi-permanent setups that demand continuous, reliable clamping. Speak to Metav Werkzeuge about specifying the Kukamet 811 Quick Clamp for robust, repeatable fixturing — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data SKU: 811-1 GTIN: 8680731504224 eClass: 21020701 ETIM: EC011973 Facts Weight: 7 kg Maximum holding force: 2,500 N Maximum clamping force: 1,000 N Special features Material: galvanised steel Mounting: horizontal foot Clamp type: screw-clamp style / lever-operated Category: quick clamp / lever clamp FAQ What maximum holding force does the clamp provide? The Kukamet 811 Quick Clamp provides a maximum holding force of 2,500 N, suitable for medium to heavy workpieces in fixture applications. Is the clamp suitable for use in humid or corrosive environments? Yes, the galvanised steel construction of the Kukamet 811 offers enhanced corrosion resistance for use in environments with elevated humidity or occasional exposure to moisture. How is the unit mounted to a workbench or fixture plate? The clamp mounts via a horizontal foot that is bolted to the workbench or fixture plate, providing a low-profile and secure attachment. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7mm 5C Collet For Lathe Chuck, High Precision 0.02mm Runout - Vertex
Take advantage of the combination of high concentricity (0.02 mm), a compact 87 mm length and reliable mass for steady clamping to improve process stability and part quality. Order the collet directly via Metav Werkzeuge or consult our specialists for configuration assistance. 5C Collet – 7 mm, 0.02 mm accuracy, Vertex 5C-7 is a compact clamping sleeve designed for precise holding of 7 mm shanks in standard 5C systems 5C collet for 7 mm shanks High concentricity, 0.02 mm tolerance Compact 87 mm length for tight setups Stable mass 0.21 kg for steady clamping Precision that reduces rework and improves cycle times The combination of 0.02 mm accuracy and the standard 5C interface makes this clamping sleeve a rational choice for situations where concentricity directly impacts part quality. Reduced radial runout leads to more consistent tool engagement and fewer scrapped components, which in turn shortens rework cycles and raises effective throughput. The measurable improvement in repeatability supports predictable process windows for milling, drilling and light turning operations. Compact design for flexible machine integration With a total length of 87 mm and a nominal clamping diameter of 7 mm, the component is designed to fit into restricted spaces without compromising stability. The modest mass of 0.21 kg contributes to vibration damping and steadier tool paths, which benefits surface finish and dimensional integrity. Compatibility with standard 5C adapters and chucks simplifies integration into existing setups and keeps machine changeover times low. Practical use and care for dependable service life Engineered for routine workshop use, the collet delivers reliable clamping when handled and maintained correctly. Regular cleaning of the bore and external surfaces, inspection for wear marks and gentle lubrication of contact faces extend service intervals and protect concentricity. For bespoke applications or higher-duty cycles, technical advisors can recommend matching chucking systems or alternative clamping solutions to suit specific machining tasks. Contact Metav Werkzeuge for tailored advice on Vertex clamping solutions and to confirm suitability for specific machines — direct from Emmerich's quality filter Technical data SKU: 5C-7 GTIN: 4061905092121 Manufacturer: Vertex Facts Diameter: 7 mm Length: 87 mm Accuracy: 0.02 mm Weight: 0.21 kg eClass: 21041712 Special features Collet type: 5C Suitable for standard 5C chucks Compact form factor for restricted setups FAQ What shank diameter does this collet accept? The collet accepts a nominal 7 mm shank and is supplied as 5C-7 by Vertex for standard 5C interfaces. What level of concentricity can be expected? The clamping sleeve is specified with an accuracy of 0.02 mm, which indicates tight concentricity for consistent tool performance. Is the collet compatible with existing 5C chucks? Yes, the unit is a standard 5C format and is compatible with conventional 5C chucks and adapters used in many workshops. How should the collet be maintained to preserve accuracy? Regular cleaning, inspection for wear and light lubrication of contact surfaces will help maintain the specified 0.02 mm accuracy and prolong service life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
7mm ER 32-GB Collet With 5.5mm Internal Square, 15 µm Runout, 40mm Length - TECWERK
Combining DIN 6499 conformity, a 15 µm runout accuracy and a compact 40 mm length, the ER32-GB collet offers dependable clamping performance for threading and precision ER-system operations; order directly via Metav Werkzeuge or consult our specialists for compatibility and delivery details. ER32-GB collet by TECWERK — 7 mm clamping diameter, internal 5.5 mm square The ER32-GB collet is a DIN 6499-compatible clamping insert designed for thread-cutting and precision clamping tasks in ER collet chucks and thread-cutting attachments. DIN 6499 compatibility for standard chucks Internal square 5.5 mm for thread cutting Clamping diameter 7 mm with 15 µm runout Compact length 40 mm for tight setups Precision that reduces rework and improves throughput The compact ER system design delivers concentrated clamping force around the tool shank, translating to consistent concentricity and reduced vibration. With a specified runout accuracy of 15 µm, the collet minimises off-centre cutting, which lowers scrap rates and shortens machining cycles. This tangible gain in process reliability supports lean production aims and makes the tool especially suitable where repeatable thread quality and surface finish are required. Integration with standard tooling for faster setup Built to DIN 6499 with an internal 5.5 mm square, the collet accepts thread-cutting mandrels and fits existing ER chucks without special adaptors. The modest 40 mm overall length eases insertion in compact spindles and tooling plates, allowing simple retrofitting into current setups. By matching established standards, the component reduces changeover complexity and supports modular tooling strategies, helping workshops maintain uptime and predictable tooling stocks. Robust clamping for everyday workshop demands A 7 mm clamping diameter provides a focused solution for smaller shank tools and threading mandrels, while the ER32 size retains the stiffness expected from ER-series collets. The internal square feature ensures positive drive when used for thread cutting, preventing slippage during interrupted cuts. Combined, these attributes make the collet a pragmatic choice for maintenance shops, service departments and production cells where dependable repeatability and straightforward handling are priorities. For precise threading and reliable ER-system clamping, contact Metav Werkzeuge in Emmerich for tailored advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000834971NW Type: ER 32-GB Label: Spannzange ER32-GB Spann-D.7mm 4-KT.5,5mm TECWERK Product type: Spannzange GB Packaging unit: 1 Facts Clamping diameter: 7 mm Runout accuracy: 15 µm Length (L): 40 mm Diameter (d): 7 mm Internal square: 5.5 mm Special features DIN 6499 compatibility Internal square for thread cutting Suitable for ER collet chucks and thread-cutting holders Designed for precise concentric clamping FAQ What chuck types is this collet compatible with? The ER32-GB collet is manufactured to DIN 6499 and is compatible with standard ER collet chucks and thread-cutting adapters designed for the ER system. Can the collet be used for thread cutting operations? Yes, the internal 5.5 mm square is specifically provided for thread-cutting mandrels and ensures a positive drive in such applications with the ER32-GB collet. How does the stated runout affect machining quality? A runout accuracy of 15 µm reduces eccentricity at the tool tip, improving surface finish and thread concentricity while lowering the likelihood of premature tool wear. Is the ER32-GB suitable for compact setups with limited spindle clearance? The collet’s 40 mm length and ER32 format make it suitable for installations where axial space is restricted, enabling easier integration into compact spindles and tooling fixtures. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
7mm ER Collet Precision Clamping, 5 µm Runout, 27mm Length - TECWERK
Take advantage of high repeatability and compact design to keep production tolerances tight while simplifying inventory management; order directly via Metav Werkzeuge or consult our specialists for suitability and fast fulfilment. Collet ER 16/426 E – ER collet, clamping Ø 7 mm (TECWERK) A robust Collet ER 16/426 E designed for precise toolholding in ER-style collet chucks, suitable for small to medium machining tasks where runout and repeatability are critical. DIN 6499-B compliant Full-length tool support Runout ≤ 5 µm Clamping Ø 7 mm Consistent precision for demanding operations The ER collet is engineered to deliver consistent concentricity: a specified runout of 5 µm ensures minimal radial error during rotation, which reduces tool wear and the need for rework. Conformity with DIN 6499-B provides a recognised interface standard for ER systems, simplifying replacement and compatibility checks. The design holds tools along the full-length clamping area, improving axial support and contributing to predictable cutting results—particularly beneficial for serial production and finishing operations where repeatable tolerances matter. Secure grip with adaptable clamping behaviour This clamping sleeve offers a defined clamping diameter 7 mm and a bridging capability of nominal minus 1.0 mm, allowing secure retention of cutting tools even when slight diameter deviations occur. The option to clamp on the lead chamfer extends practical flexibility for commonplace tool geometries. Compact external dimensions (L 27 mm, D 17 mm) make it suitable where radial space is limited while maintaining the mechanical stiffness necessary for stable machining. The result is reduced setup time and greater process reliability. Easy integration and streamlined workshop logistics Designed for ER-style collet chucks, the component fits into established toolholding ecosystems without the need for bespoke adaptors. The absence of intermediate sizes reduces the number of spare items required, supporting a leaner tooling inventory and faster tool changes. The robust mechanical concept from TECWERK focuses on longevity and consistent performance, which together contribute to less downtime and smoother production flow. For application or fitting questions, Metav Werkzeuge can advise on the correct selection and supply channels for immediate needs. Contact Metav Werkzeuge today to secure TECWERK precision collets for reliable toolholding—Metav supplies from Emmerich with transparent order handling; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832918NW Name: Collet ER 16/426 E, clamping Ø 7 mm Product type: ER collet Manufacturer: TECWERK Packaging unit: 1 Facts Clamping diameter: 7 mm Length L: 27 mm Outer diameter D: 17 mm Runout / repeatability: 5 µm Clamping diameter bridging: nominal − 1.0 mm Special features Standard: DIN 6499-B Fits ER-style collet chucks Tools held along full clamping length Can be clamped on the lead chamfer No intermediate sizes required FAQ What chuck systems is this collet compatible with? The Collet ER 16/426 E is made for ER-style collet chucks and conforms to DIN 6499-B, ensuring straightforward compatibility with standard ER toolholders. What is the nominal clamping size and its tolerance bridging? The clamping diameter is 7 mm with a bridging capability of nominal minus 1.0 mm, allowing secure clamping of tools with minor dimensional variance. How precise is the concentricity of the collet? TECWERK specifies a runout and repeatability of 5 µm for this ER collet, supporting high-precision machining and consistent part quality. Can tools be clamped on the lead chamfer with this collet? Yes, the design permits clamping on the lead chamfer and supports tools along the full clamping length for improved axial stability. What are the key dimensions to check for machine compatibility? Relevant dimensions are length L = 27 mm and outer diameter D = 17 mm; the SKU for ordering is 2000832918NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com