Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
750N Vertical Clamp 94mm Arm, Massive Holding Arm & Safety Latch, Horizontal Base - Kukamet
Combine a compact 94 mm arm, a 1,000 N holding force and a robust safety lock to secure repetitive production tasks. The durable blackened finish and lightweight design ensure straightforward integration into fixtures. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 211 — compact vertical clamping device with 94 mm arm and 1,000 N holding force (Kukamet) The Vertical clamp 211 is a compact vertical clamping device for workshop and light industrial fixtures, featuring a solid holding arm and an integrated safety lock for repeatable securing of workpieces Solid 94 mm holding arm and safety lock Up to 1,000 N holding force Horizontal base for stable mounting Blackened finish for corrosion resistance Consistent clamping performance in confined spaces This vertical clamping device delivers a predictable combination of holding force and pressing force, with a maximum holding capacity of 1,000 N and a pressing force of 750 N. The defined separation between holding and pressing values allows planners to design jigs where retention and clamping pressure are treated independently: the retention rating prevents part movement during operations, while the pressing rating denotes the achievable clamp pressure. The 94 mm arm provides a good lever length for manual actuation without adding bulk, and the low mass of 0.155 kg keeps the fixture lightweight for easy handling. The blackened finish contributes to wear resistance and reduces visible corrosion in everyday workshop environments. Secure mounting and reduced downtime through mechanical safety A horizontal base enables a stable footprint for bench or plate mounting, while the massive holding arm and integrated safety lock significantly lower the risk of accidental release under vibration. For production cells and assembly benches this translates into fewer interruptions and less rework: once engaged, the latch maintains position until deliberately released, which is particularly advantageous in repetitive hand-assembly or test applications. The clamp’s compact frame simplifies retrofitting into existing tooling plates where space is restricted, delivering dependable clamping without complex adaption. Ready for fixtures, jigs and small-series assembly The design is suited to fixtures, holding devices and small-series manufacturing where repeatability and quick manual operation matter. The combination of robust mechanics and compact dimensions supports ergonomic handling in assembly tasks and quick changeovers on test benches. The unit’s surface finish and solid construction favour long service intervals, decreasing replacement frequency and supporting a sustainable workshop approach through durable components and low maintenance requirements. For secure, compact clamping from Kukamet, contact Metav Werkzeuge for technical advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B211-1-D-L-C2 Manufacturer: Kukamet Facts Arm length: 94 mm Max pressing force: 750 N Max holding force: 1,000 N Weight: 0.155 kg ECLASS: 21041717 ETIM: EC011973 Special features Horizontal base mounting Massive holding arm Safety lock Material: blackened finish FAQ What is the difference between the pressing and holding forces? The pressing force (750 N) describes the clamp’s achievable clamping pressure, while the holding force (1,000 N) indicates retention strength against displacement; both values apply to the Vertical clamp 211 from Kukamet. Can the clamp be mounted on a horizontal plate? Yes. The clamp is supplied for horizontal base mounting and is intended for stable fixation on bench plates and fixture boards. Is the clamp suitable for repetitive manual operation? The solid holding arm and safety lock are designed for frequent manual actuation, offering reliable repeatability for jigs and small-series assembly. What surface treatment does the clamp have? The clamp is finished with a blackened finish, providing enhanced resistance to wear and a degree of corrosion protection appropriate for workshop environments. How much does the clamp weigh and does that affect mounting? With a weight of 0.155 kg, the device is lightweight, simplifying mounting and reducing additional load on fixture plates Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With 1000N Holding Force, Horizontal Foot, M5x35 Pressure Spindle - Kukamet
Compact, reliable clamping with a 1,000 N holding force and a 750 N clamping force, supplied in a space-saving 0.155 kg body with horizontal-foot mounting for simple fixture integration. Order the 211 vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 211 Vertical clamp — Kukamet, 1,000 N holding force, horizontal foot The 211 vertical clamp is a compact vertical hold-down designed for production jigs and workshop fixtures, providing dependable, repeatable clamping for small- to medium-sized workpieces. Horizontal-foot mounting for stable installation 1,000 N holding force for secure retention 750 N clamping force for firm workpiece pressure Blackened finish for a durable surface Secure holding for repeatable machining The combination of a 1,000 N holding force and a 750 N clamping force ensures stable retention in machining and assembly fixtures. These measurable values describe two distinct effects: the holding force indicates the static retention capacity of the clamp, while the clamping force refers to the downward pressure applied to the workpiece by the spindle. The compact construction and low mass of 0.155 kg reduce load on moving fixtures and permit close packing of multiple clamps on a single jig, supporting consistent, repeatable operation without excessive bulk. Easy mounting and fine adjustment for precise alignment Equipped with a horizontal foot for mounting, the clamp installs quickly on flat fixture plates or baseboards and aligns with common jig layouts. The M5x35 pressure spindle allows fine height adjustment and compensates for workpiece irregularities, enabling accurate contact without additional shims. The blackened finish provides a modest protective layer and a subdued aesthetic that reduces glare and visual distraction at the workbench, while the simple geometry of the device facilitates straightforward replacement and low-maintenance operation. Practical benefits for workshop throughput Designed for straightforward integration into clamping systems, this vertical hold-down supports faster set-ups and reduced rework. The robust mechanical values and compact form factor contribute to lower cycle times and improved process reliability in repetitive tasks. Beyond technical performance, the product delivers predictable behaviour in series production and small-batch work, helping maintain quality standards across multiple operators and shifts. Contact Metav Werkzeuge to discuss deployment of the Kukamet 211 vertical clamp and secure reliable clamping for production fixtures — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: B211-1 GTIN: 8680731503807 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Clamping force (max): 750 N Holding force (max): 1000 N Weight: 0.155 kg Pressure spindle: M5x35 Special features Horizontal-foot mounting Blackened finish Arm: Not applicable No special additional features FAQ What types of fixtures suit this clamp? The Kukamet 211 vertical clamp is intended for jigs and fixtures where a compact vertical hold-down with a horizontal foot is required, such as assembly benches and small machining fixtures. Can the clamping pressure be adjusted? Yes. Adjustment is achieved via the M5x35 pressure spindle; the 211 vertical clamp enables fine tuning of contact pressure and compensation for variable workpiece heights. Is the clamp corrosion-resistant? The clamp has a blackened finish that provides basic surface protection; for aggressive environments additional corrosion protection should be considered. How much holding force does the device provide? The device specifies a holding force of 1,000 N and a clamping force of 750 N, offering clear benchmarks for fixture design and safety margins. Which SKU should be ordered for this item? Order SKU B211-1 for the Kukamet 211 vertical clamp; this identifier corresponds to the standard configuration described above. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With 1000N Holding Force, Zinc Plated, Vertical Base - Kukamet
Take advantage of a compact, galvanised lever clamp offering 750 N clamping force and 1,000 N holding capacity for reliable workholding; its M5x35 pressure spindle and vertical-foot mounting enable quick integration into fixtures. Order the Vertical Clamp 212 directly via Metav Werkzeuge or consult our specialists if needed. Vertical Clamp 212 — Vertical lever clamp with 750 N clamping force (Kukamet) The Vertical Clamp 212 is a compact vertical lever clamp designed for secure upright workholding in jig and fixture applications across production and workshop environments. Galvanised finish for corrosion resistance 750 N maximum clamping force 1,000 N holding force capacity M5x35 adjustable pressure spindle Vertical-foot mounting for upright installation Consistent clamping performance in compact form The Vertical Clamp 212 combines a compact construction with measurable power: a maximum clamping force of 750 N and a holding capacity of 1,000 N. These figures translate into dependable restraint of workpieces during assembly and machining operations, reducing repositioning and rework. The light overall mass of approximately 0.155 kg supports installations where space and weight are critical without compromising stability. By specifying clamping and holding values, selection and comparability become objective: the clamp performs predictably under known loads, which simplifies integration into fixtures and repeatable processes. Durable galvanised body for workshop resilience A galvanised surface treatment provides robust protection against condensation and common workshop contaminants, extending service life in demanding environments. Galvanisation minimises surface corrosion and reduces maintenance cycles, supporting continuous operation in production settings. The corrosion-resistant finish also preserves mechanical tolerances and contact surfaces, ensuring the clamp maintains repeatable positioning over time. For buyers seeking low-maintenance components that withstand routine exposure, the protective coating represents a clear operational advantage. Fast adjustment and simple mounting for efficient setup Equipped with an M5x35 pressure spindle, the clamp allows for fine adjustment of contact pressure and compensates for workpiece tolerances, enabling swift set-up and secure contact without auxiliary shims. The vertical-foot mounting is specifically designed for upright attachment to plates and fixtures, simplifying alignment in vertical assemblies and saving assembly time. These design choices reduce fixture complexity and support faster changeovers, which improves overall throughput in batch and small-series production. Practical suitability and integration guidance This lever clamp is conceived for modular fixtures, jigs and assembly stations where a reliable, repeatable vertical clamp is required. The straightforward mechanical design supports standard workshop maintenance and inspection routines, while the measurable parameters help quality planning and load calculations. For applications that demand a compact clamp with predictable force characteristics and corrosion protection, the 212 model provides an efficient balance of performance and simplicity. For purchase or technical advice about the Kukamet Vertical Clamp 212, contact Metav Werkzeuge for tailored guidance and reliable supply from Emmerich Technical data Article number: 212-1 GTIN: 8680731501476 Manufacturer: Kukamet Facts Weight: 0.155 kg Maximum clamping force: 750 N Maximum holding force: 1,000 N Pressure spindle: M5x35 Mounting: vertical foot eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Type: vertical lever clamp Arm: not applicable Special feature: none Category: clamp FAQ What clamping capacity does the Vertical Clamp 212 offer? The Vertical Clamp 212 delivers a maximum clamping force of 750 N and a holding capacity of 1,000 N, specified for reliable workholding in fixture assemblies. How is the clamp mounted in upright installations? Mounting is via a vertical foot, enabling upright attachment to plates and fixtures for secure vertical clamping. Can the contact pressure be adjusted? Yes. The clamp uses an M5x35 adjustable pressure spindle for fine tuning contact pressure and compensating for workpiece variations. Is the clamp suitable for harsh workshop environments? The galvanised finish provides corrosion resistance suitable for standard workshop conditions, reducing maintenance needs and preserving function. What is the item number for ordering and identification? The clamp is listed as article number 212-1 (GTIN 8680731501476) for ordering and inventory management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With Safety Lock, Horizontal Base, Blackened Finish - Kukamet
Take advantage of a compact, high-performance vertical clamp that combines a safety lock with reliable clamping and holding forces to keep small workpieces fixed during jigs and fixtures. The unit’s horizontal base and slim profile allow easy integration into assemblies while the blackened finish provides corrosion resistance and a professional appearance. Order via Metav Werkzeuge or request technical advice for fast supply from Emmerich. Vertikalspanner 211 – vertical clamp with safety lock (Kukamet) A Vertikalspanner 211 is a compact vertical clamping lever designed for secure fixation of small workpieces in jigs, fixtures and assembly rigs. Safety lock for secure clamping Horizontal base for fixed mounting Clamping force up to 750 N Holding force up to 1,000 N Reliable clamping for repeatable production The lever clamp delivers consistent, measurable force that supports repeatable assembly and testing cycles. With a clamping force rated at 750 N and a holding force of 1,000 N, the device reduces rework caused by slippage and misalignment. The integrated safety lock prevents unintentional release during handling and vibration-prone processes, thus improving process reliability and reducing downtime. Brief technical specifications such as spindle size are chosen to balance load capacity and compactness. Space-saving construction and durable finish The clamp’s compact form and lightweight construction make it suitable where space is limited or multiple clamps are required in close proximity. A blackened finish provides a protective surface that resists wear and presents a tidy workbench appearance. The small mass offers low inertia during actuation while maintaining structural rigidity, enabling secure clamping without bulky fixtures. The included spindle thread and length ensure stable contact with the workpiece while preserving adjustability. Straightforward installation and safe operation Designed for a horizontal base mounting, the clamp is easy to mount on plates, tooling blocks or fixture rails and can be retrofitted into existing jigs with minimal modification. The M5x35 spindle specification allows controlled pressure transfer and simple swapping of contact pads if required. The mechanism is engineered for simple lever action, enabling fast clamping cycles that help maintain throughput in manual and semi-automated stations. The incorporated safety lock supports safe handling during maintenance or intermittent processes. Practical applications and workshop benefits This vertical clamping lever is well suited for small- to medium-scale fixtures in inspection, assembly and light machining contexts. Its combination of compactness and performance is particularly useful when multiple clamps must be positioned near one another without obstructing access. The robust finish and decisive locking behaviour enhance confidence in repeated operations, making it a dependable component for routine production tasks and workshop projects. For secure, compact clamping with an integrated safety lock, request availability and technical advice from Metav Werkzeuge — supplied directly from Emmerich for quick integration into production. Technical Data Article number: B211-1-L GTIN: 8680731507645 Manufacturer: Kukamet Facts Clamping force: 750 N Holding force: 1,000 N Weight: 0.155 kg Spindle: M5x35 Special features Mounting: horizontal base Safety lock: yes Finish: blackened SKU: B211-1-L FAQ What maximum clamping and holding forces does the clamp provide? The Vertikalspanner 211 delivers a clamping force of up to 750 N and a holding force of up to 1,000 N, suitable for secure fixation in many jig and fixture applications. How is the clamp mounted in a fixture? Mounting is performed via a horizontal base; the clamp is intended for plate or tooling-block installation where a horizontal foot is required. Does the device include a safety mechanism to prevent accidental release? Yes, the unit is equipped with a built-in safety lock to prevent unintended opening during vibration or handling. What is the finish and how does it affect durability? The clamp features a blackened finish that enhances surface protection against wear and provides a clean, durable appearance for workshop environments. Which spindle specification is used for contact adjustment? The clamp uses an M5x35 spindle, offering a balance between fine adjustment and secure contact pressure. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With Safety Lock, Horizontal Base, Stainless Steel - Kukamet
Benefit from a compact, corrosion‑resistant clamp that combines a stainless steel build with an integrated safety lock and delivers up to 750 N clamping force; order the unit directly via Metav Werkzeuge or contact our consultants for guidance. 211 Vertical Clamp — stainless steel vertical clamping element with safety lock (Kukamet) The 211 Vertical Clamp provides secure vertical clamping via a horizontal‑foot mounting and is suitable for production and workshop fixture applications. Stainless steel construction Integrated safety lock Max clamping force 750 N Horizontal-foot mounting Consistent clamping for repeatable production setups The vertical clamping element delivers predictable holding performance thanks to a rated clamping force of 750 N and a holding force of 1000 N, which supports repeatable workpiece positioning in serial operations. The compact design minimises fixture bulk while the low mass of 0.155 kg reduces the load on assemblies and allows quicker cycle times. These measurable values facilitate process planning and enable a reliable comparison of clamping resources across fixtures. Corrosion resistance and straightforward integration Constructed from stainless steel, the clamp resists corrosion and maintains functional surfaces in humid or oil‑prone shop environments, reducing replacement intervals and cleaning cycles. The unit is supplied for horizontal‑foot mounting, enabling straightforward attachment to tooling plates or subplates, while the pressure spindle M5x35 provides fine seating adjustment. This combination supports long service life and simplifies retrofitting into existing jigs without complex modifications. Safety features that protect parts and operators An integrated safety lock prevents accidental release during machining or handling, lowering the risk of workpiece displacement and subsequent rework. The lever‑style actuation gives a tactile, quick engagement and release, supporting efficient setup changes and safer manual operation. Built to industrial standards, the clamp contributes to consistent quality outcomes and reduces unplanned downtime through secure fixturing. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 211 Vertical Clamp into existing fixtures or to request a tailored quotation from our Emmerich team. Technical data Article number: S211-1-L GTIN: 8680731509113 eClass: 21041717 ETIM: EC011973 Facts Weight: 0.155 kg Max clamping force: 750 N Max holding force: 1000 N Pressure spindle: M5x35 Special features Material: stainless steel Integrated safety lock Horizontal-foot mounting Lever-style actuator FAQ What clamping and holding forces does the 211 offer? The Kukamet 211 Vertical Clamp provides a clamping force of 750 N and a holding force of 1000 N, specified for consistent fixture performance (SKU S211-1-L). Is the clamp suitable for corrosive or humid workshop environments? Yes, the clamp is manufactured from stainless steel, which improves corrosion resistance and is suitable for demanding shop environments where moisture or cutting fluids are present. How is the clamp mounted to a fixture plate? The unit uses a horizontal‑foot mounting that allows secure attachment to tooling plates or subplates; the pressure spindle M5x35 provides adjustment for precise seating. Does the clamp include a safety mechanism to prevent accidental release? An integrated safety lock is provided to reduce the risk of unintended release during machining or handling, enhancing both part security and operator safety. What type of actuation does the clamp use for engagement and release? The device employs a lever‑style actuator for quick manual engagement and release, supporting fast setup changes and reliable operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp With Safety Lock, Zinc Plated, M5x35 Spindle, 1000N Holding Force - Kukamet
A galvanised vertical clamp with an integrated safety lock and angle base delivers secure, repeatable clamping up to 750 N while keeping fixture weight to just 0.17 kg; ideal where compact, reliable vertical holding is required. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. 213 Vertical Clamp — Kukamet galvanised, safety-lock, angle base A 213 Vertical Clamp designed for secure vertical clamping in jigs and fixtures, featuring an angle base and an integrated safety lock for safe, repeatable operation Galvanised corrosion-resistant finish Integrated safety lock mechanism Clamping force up to 750 N Compact 0.17 kg lightweight design Consistent, measurable clamping for reliable production The clamp delivers a defined clamping force of 750 N and a holding force of 1000 N, providing clear, comparable performance figures that aid fixture design and process planning. These numerical values enable rational decision-making: machines and jigs can be specified with predictable load limits, reducing the risk of over- or under‑dimensioning. The screw is sized M5x35, which simplifies replacement and integration with common fixture components. By stating objective metrics, the clamp supports efficient setup and predictable repeatability on the shop floor. Space-saving design that supports flexible fixtures With a galvanised finish and a weight of just 0.17 kg, this vertical clamp suits compact jigs and modular tooling where mass and corrosion resistance matter. The angle base mounting allows secure positioning on plates and frames without extra adapters, so assembly time is shortened and footprint is minimised. The small form factor and standard threaded pressure spindle make the unit suitable for both retrofits and new fixture concepts, helping maintain throughput with minimal impact on existing tooling layouts. Safety-first features and dependable sourcing Built-in safety lock prevents accidental release during machining or handling, lowering the chance of workpiece movement and downstream rework. The clamp is produced under the Kukamet name and supplied via Metav’s European distribution channel, which acts as a quality filter to ensure consistent delivery and traceable stock. This combination of a mechanical safety feature and a reliable supply chain reduces operational risk and supports continuous production. For applications where operator safety and fixture integrity are priorities, this vertical clamping solution offers a pragmatic balance of protection and performance. For expert advice or to secure supply of Kukamet clamping solutions, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored ordering and technical information Technical data SKU: 213-1-L GTIN: 8680731501858 eClass: 21041717 ETIM: EC011973 Facts Clamping force (max): 750 N Holding force (max): 1000 N Weight: 0.17 kg Pressure spindle: M5x35 Special features Material: galvanised Mounting: angle base Safety lock: integrated Arm: not applicable Brand: Kukamet FAQ What maximum clamping force does the clamp provide? The clamp offers a maximum clamping force of 750 N and a holding force of 1000 N, suitable for many light to medium fixture tasks with defined load requirements. Is the unit protected against corrosion? Yes, the clamp is supplied with a galvanised finish for enhanced corrosion resistance in workshop environments. How is the clamp mounted to a fixture plate? Mounting is via an angle base, allowing direct attachment to plates and frames without additional adapters. Does the clamp include a safety mechanism to prevent accidental release? An integrated safety lock is provided to secure the clamping position during machining and handling. Which thread is used for the pressure spindle? The pressure spindle is specified as M5x35, compatible with standard fixture components. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Centre Point 60° Pro Accuracy Extended Nose MK2, Runout 0.005 mm, 7000 min⁻¹ - RÖHM
Take advantage of the combination of high runout precision, extended tip support and a sturdy MT2 taper for reliable turning operations; the result is consistent concentricity and fewer reworks. Order the RÖHM HVL Pro MK2 centre directly via Metav Werkzeuge or ask our consultants if needed. RÖHM HVL Pro MK2 centre — MT2 taper with extended running point for precision turning RÖHM HVL Pro MK2 is a pro‑grade centring centre designed for demanding lathe work, offering extended tip support and high concentric accuracy for stable machining. Pro accuracy design, extended tip 60° precision running tip MT2 shank, 17.78 mm diameter Max 7000 rpm and 140 kg load Consistent concentricity for reduced rework The pro version delivers exceptional concentricity thanks to a guaranteed runout of max. 0.005 mm, which keeps the workpiece rotation true even under load. This measurable accuracy shortens inspection cycles and reduces scrap rates, making the tool an economical choice for repetitive turning operations. The 60° tip geometry provides a standard contact that is compatible with common centre holes, while the extended tip improves support for longer workpiece projections, translating technical precision into tangible production benefits. Built for higher speeds and heavier parts Engineered for dynamic use, the centre accepts speeds up to 7000 rpm and a recommended maximum workpiece mass of 140 kg, enabling faster cycle times without compromising stability. The compact 43 mm housing and balanced construction contribute to smooth rotation, reducing vibration and tool wear. Where faster spindle speeds are required, the combination of robust bearings and the MT2 taper reduces the risk of slippage and runout drift, supporting efficient throughput in modern turning applications. Straightforward integration and durable fit The Morse taper MT2 shank and a shaft diameter of 17.78 mm ensure secure seating in standard lathe sockets, allowing quick changeover between centres and other Morse‑taper tooling. The unit’s overall projection of 75 mm and a tip length of 34 mm provide a practical balance between reach and rigidity. Lightweight at approximately 0.5 kg, the centre is easy to handle and install, while the precise construction maintains alignment over repeated cycles, improving process reliability in the workshop. Practical benefits for workshop productivity Beyond raw numbers, the design focuses on uptime and operator confidence: the pro execution reduces the need for frequent re‑centering, and the extended running point helps maintain support on elongated components. These attributes mean fewer interruptions and more predictable part quality, which is particularly valuable in batch production and precision turning tasks. The HVL Pro MK2 pairs measurable technical performance with practical advantages that simplify daily machining workflows. Contact Metav Werkzeuge today for tailored technical advice, compatibility checks and to place an order for the RÖHM HVL Pro MK2 centre via Metav Werkzeuge GmbH — specialists in precision tools and workshop supplies. Technical data Article number: 4000832081NW Brand: RÖHM Product type: Centre Facts Projection: 75 mm Tip length: 34 mm Tip angle: 60° Housing diameter: 43 mm Shaft diameter: 17.78 mm Runout deviation: max. 0.005 mm Max. rpm: 7000 rpm Max. workpiece weight: 140 kg Weight: 0.5 kg Special features Pro accuracy version with extended running point MT2 (Morse taper 2) shank Packaging unit: 1 SKU: 4000832081NW FAQ What shank does this centre use? The RÖHM HVL Pro MK2 centre is supplied with an MT2 (Morse taper 2) shank for secure seating in standard lathe sockets. What is the maximum rotational speed for safe operation? The centre is specified for up to 7000 rpm; running within this limit ensures the designed balance and bearing performance. How accurate is the running tip concentricity? The RÖHM HVL Pro MK2 live centre guarantees a runout deviation of max. 0.005 mm, supporting precision turning and reduced scrap. Can it support heavy or long workpieces? With a maximum recommended workpiece weight of 140 kg and an extended tip length, the centre provides enhanced support for longer components within the stated limits. What identifiers should be used when ordering? Order using SKU 4000832081NW and specify RÖHM HVL Pro MK2 centre to ensure correct supply and compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Clamp Toggle Closure Clamp With Hook, 2.2kN Thrust / 3.2kN Hold, Blackened Finish - Kukamet
High holding performance and a compact, hook-equipped design combine to deliver secure, repeatable closures in assembly and fixture applications; the clamp’s horizontal base simplifies integration into production jigs. Order the Kukamet 351 via Metav Werkzeuge or consult the Metav technical team for specification support. Kukamet Hook Latch Toggle Clamp 351 — robust hold with 3,200 N capacity and horizontal base A Kukamet 351 hook latch toggle clamp designed for reliable clamping and closure tasks in workshop and industrial fixtures, featuring a horizontal mounting foot for stable installation. Holding force up to 3,200 N Pressing force up to 2,200 N Horizontal base for stable mounting Blackened finish for wear resistance Reliable clamping performance that reduces rework The latch delivers a high holding force of 3,200 N together with a pressing force of 2,200 N, engineered to secure components under dynamic loads. These figures translate into consistently low slippage and a reduced need for rework in repetitive assembly cycles. For production planners and workshop engineers, the measurable load ratings support process reliability and allow straightforward comparison with alternative clamping solutions. Durable finish and compact design for long service life Constructed with a blackened finish, the clamp resists wear and provides basic corrosion protection while retaining a compact footprint at 0.335 kg. The finish is suited to industrial environments where moderate protection is required without the cost or bulk of plated alternatives. The robust build and lightweight nature support mobile fixtures and jigs, enabling faster handling during set-up and fewer replacements over time. Practical mounting and quick action for efficient workflows The horizontal foot mating allows straightforward integration into flat mounting surfaces and tooling plates, while the integrated hook ensures a positive engagement with the mating part. The combination of stable mounting and quick action closure reduces cycle times when securing panels, lids or moulds. Thread engagement of 75 mm provides adjustment range for compensating tolerances in fixture design, simplifying alignment without additional parts. For dependable clamping in fixtures and closures, select the Kukamet 351 from Metav Werkzeuge — available with direct dispatch from Emmerich; technical advice and order support from Metav’s specialists at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: B351-3 GTIN: 8680731508543 SKU: B351-3 Facts Max pressing force: 2,200 N Max holding force: 3,200 N Weight: 0.335 kg Thread length: 75 mm Special features Mounting: horizontal base Finish: blackened With hook Category: Spanner FAQ What loads can the clamp handle in continuous operation? The Kukamet 351 hook latch toggle clamp is rated with a holding force of 3,200 N and a pressing force of 2,200 N (SKU B351-3), suitable for repetitive fixture use within those limits. Is the clamp suitable for jig and fixture mounting on flat plates? Yes, the horizontal base is designed for secure mounting on flat tooling plates and jigs; the latch clamp from Kukamet offers stable installation and alignment. What adjustment range does the threaded section provide? The threaded engagement has a length of 75 mm, giving sufficient adjustment for compensating workpiece tolerances and positioning in assembly fixtures for the Kukamet 351. How does the finish affect longevity in a workshop environment? The blackened finish on this latch clamp increases surface wear resistance and provides basic corrosion protection, extending service life in standard workshop conditions. Can the latch be used to secure removable panels or transport lids? The hook-equipped toggle latch is suitable for securing removable panels and lids where a positive mechanical engagement and repeatable clamping force are required; refer to the Kukamet 351 specification (SKU B351-3) for load guidance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Clamp With Horizontal Foot, Safety Lock, 2.2kN Press Force, 3.2kN Holding Force, Hook, Blackened - Kukamet
Reliable clamping for production: the combination of a 3,200 N holding force, a 2,200 N closing force and an integrated safety lock provides secure fixture retention and repeatable operation on production jigs. Order the clamp directly via Metav Werkzeuge or request specification advice from our consultants. 351 toggle latch clamp – horizontal base, safety lock (Kukamet) The 351 toggle latch clamp is a compact industrial clamp for horizontal mounting that delivers high holding forces and secure locking for fixtures and jigs. Horizontal base for stable mounting Safety lock prevents accidental release Holding force up to 3,200 N Thread length 75 mm for versatile fixing Reliable, high-force clamping for repeatable fixes The clamp delivers a holding force of 3,200 N and a closing force of 2,200 N, values that translate into confident part retention and reduced movement during machining or assembly. These figures indicate the maximum sustained grip and the actuating force respectively; in practice this means fewer rejects and less rework when used in production fixtures. Built for repetitive cycles, the design reduces setup variation and supports process stability on automated or manual lines. Robust mounting and integrated safety for workshop use A horizontal base simplifies installation on machine tables or fixture plates and ensures a compact, low-profile setup. The mechanism includes a safety lock that prevents unintended release, increasing operator safety and protecting workpieces during transport or vibration-prone processes. The component’s blackened finish gives corrosion resistance in everyday workshop conditions while maintaining a professional appearance suitable for industrial environments. Practical integration and clear technical fitment The clamp features a thread length of 75 mm, enabling flexible attachment and depth adjustment in a wide range of jigs. At 0.335 kg mass and with a compact hook version, the unit is easy to fit where space is limited; the model is supplied as SKU B351-3-L for straightforward ordering. For applications where reliable repeatability is essential, the latch mechanism offers a balance of accessible handling and robust performance, minimising machine downtime and supporting consistent assembly quality. For secure, production-ready clamping with Kukamet quality, contact Metav Werkzeuge in Emmerich for tailored advice and ordering information on the 351 toggle latch clamp Technical Data Article number: B351-3-L GTIN: 8680731508550 Manufacturer: Kukamet Material finish: blackened finish Weight: 0.335 kg Core specifications Closing force (max): 2,200 N Holding force (max): 3,200 N Thread length: 75 mm Weight: 0.335 kg Features and variants Horizontal base mounting With hook Safety lock included Model: 351 Category: Toggle latch clamp FAQ Is this clamp suitable for horizontal mounting? Yes. The 351 toggle latch clamp is designed for horizontal base mounting, making it suitable for machine tables and fixture plates where a low profile is required. What grip and actuation forces are provided? The device offers a holding force of up to 3,200 N and a closing force up to 2,200 N, values that support secure retention and robust actuation for production use. Does the clamp include a safety mechanism? Yes. The clamp includes an integrated safety lock that prevents accidental release and increases operational safety during vibration or handling. Which finish and model should be ordered for a hook version? The hook version is supplied with a blackened finish under model designation 351 and is available as SKU B351-3-L Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Clamping Screw M10x1.5P Heat-Treated Steel − Vertex
Take advantage of heat-treated steel construction and a standard M10x1.5P thread to secure fixtures reliably; the compact 75 mm length and low weight support repeatable setups and simple inventory handling. Order Vertex clamping components directly via Metav Werkzeuge or contact our consultants for tailored advice. Clamping screw 1333M – M10x1.5P, 75 mm, heat‑treated steel (Vertex) Clamping screw 1333M for general-purpose fixture and jigs applications, combining a compact profile with robust material properties for consistent workholding. Heat-treated steel construction Thread M10x1.5P for secure fixation Length 75 mm for compact setups Weight 0.04 kg per item Robust clamping for consistent setups This component has been engineered for dependable clamping in production and workshop environments. Manufactured from heat-treated steel, the part offers a balance of hardness and toughness that reduces deformation under load; this translates into fewer re-tightenings during batch work and more consistent part positioning. The compact geometry supports tight spacing on fixtures while the M10x1.5P thread provides a widely used metric connection that mates with common threaded holes and nuts, simplifying replacement and interchangeability. For technicians and buyers seeking predictable repeatability, the material choice and thread standard help to lower variance in clamped assemblies. Precision thread and compact design for reliable fixation The metric M10x1.5P thread combined with the 75 mm length is designed to deliver secure engagement without excessive protrusion, which is advantageous when space is limited on tool plates or modular clamping systems. The relatively low mass (0.04 kg) reduces inertia during handling and stock rotation, easing manual assembly and automated feeding where small form‑factor clamping hardware is required. For users less familiar with thread terminology: the designation refers to a 10 mm diameter with a 1.5 mm thread pitch, a common configuration that ensures compatibility across a wide range of fixtures and fasteners. Durability that reduces maintenance and downtime Using a heat-treated alloy means the fastener resists wear and surface damage better than untreated alternatives. The treatment process improves fatigue resistance, which is particularly valuable in cycling clamp applications or where repeated assembly and disassembly occur. Fewer damaged threads and less frequent replacement result in smoother workflows and reduced spare parts consumption. The component’s straightforward design also supports easy inspection and replacement as part of routine maintenance, contributing to more stable production throughput. Practical integration and inventory benefits Supplied under the Vertex SKU 1333M, this clamping bolt fits seamlessly into standard tooling inventories. The conventional M10x1.5P thread reduces the need for specialised mating parts, and the modest length makes it suitable for a variety of jigs, vises and bespoke fixture assemblies. For procurement teams, a consistent spec across fasteners streamlines stock management and reduces the risk of ordering incompatible items. Where traceability is required, the product can be logged by SKU and GTIN for controlled replenishment cycles. For reliable clamping components from Vertex, contact Metav Werkzeuge in Emmerich for expert advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing fixtures Technical data SKU: 1333M GTIN: 4061905092770 Manufacturer: Vertex Facts Weight: 0.04 kg Length: 75 mm Thread: M10x1.5P Special features Material: heat-treated steel Brand: Vertex FAQ What material is the clamping screw made from? The clamping screw 1333M is manufactured from heat-treated steel to enhance wear and fatigue resistance in routine clamping applications. Which thread and dimensions should be expected? The part uses an M10x1.5P thread and has a length of 75 mm, providing standard metric compatibility for fixtures and jigs. Is this component suitable for tight fixture spacing? Yes, the compact 75 mm length and conventional thread make the clamping screw well suited to applications with limited clearance. How does heat treatment benefit long‑term use? Heat treatment increases hardness and fatigue strength, meaning the Vertex clamping screw maintains clamping performance longer and reduces replacement frequency. Can the clamping screw be used with common nuts and threaded holes? The M10x1.5P specification matches standard metric mating parts, allowing straightforward interchange with existing hardware. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75mm Clamping Screw M12x1.75, Heat-Treated Steel - Vertex
Take advantage of the combination of heat-treated steel construction, a precise M12×1.75 thread and a compact 75 mm length to secure fixtures reliably and reduce setup variability; order the component via Metav Werkzeuge or consult our specialists for specification support. Clamping screw — heat-treated steel, M12×1.75 thread (Vertex) A clamping screw designed for secure fixture and jig fastening in industrial and workshop clamping technology, offering a durable steel body and metric fine thread for consistent engagement. Heat-treated steel for high strength M12×1.75 metric thread for precision fit 75 mm length for compact clamping Consistent strength from heat-treated construction The component’s heat-treated steel body provides a uniform balance between toughness and hardness, which reduces the risk of deformation under repeated load. In practice this means fewer re-torques and more predictable clamping forces when used in jigs, fixtures or machine tooling. The material choice supports longevity in demanding production environments and contributes to consistent function over many cycles, helping to lower maintenance intervals and downtime. Precise metric thread for repeatable alignment A M12×1.75 thread ensures compatibility with standard metric nuts and threaded holes commonly found on clamping plates and tooling adaptors. The defined pitch promotes repeatable axial movement and fine adjustment when aligning components, enabling accurate positioning without excessive play. Supplied under SKU 1343M, the fastener’s thread geometry minimises micro-movement, which is critical where secure, vibration-resistant fastening is required. Compact form with dependable holding capacity With a 75 mm length and a mass of 0.06 kg, this fastener occupies minimal space while delivering secure engagement in shallow or confined assemblies. The compact profile permits close-packed fixture layouts and contributes to ergonomic handling during repetitive setups. Reduced bulk also aids in preventing interference with adjacent tooling components, allowing denser and more efficient fixture design without sacrificing clamping performance. Designed for integration into clamping technology Engineered for use in clamping systems and workshop fixtures, the fastener integrates smoothly with common clamping elements and modular tooling. The robust construction supports frequent tightening cycles typical of production environments and lends itself to both manual and machine-driven assembly processes. As part of a broader clamping solution, this component helps shorten fixture changeover times and supports precise production repeatability. Quality provenance and procurement confidence Produced by Vertex and offered through Metav Werkzeuge’s European quality distribution, the part combines manufacturer expertise with a procurement channel that acts as a quality filter for the market. Traceable specifications and consistent material processing reduce uncertainty in procurement decisions, supporting long-term reliability in industrial applications and reinforcing workshop confidence in component performance. Contact Metav Werkzeuge to confirm compatibility for specific fixtures or to request a quotation for Vertex clamping screws (SKU 1343M) delivered from our Emmerich quality centre Technical Data Article number: 1343M GTIN: 4061905088063 Manufacturer: Vertex Dimensions & Specifications Length: 75 mm Thread: M12×1.75 Weight: 0.06 kg Materials & Features Material: Heat-treated steel eClass: 21022190 Application: Clamping technology FAQ What thread specification does this fastener use? The fastener is supplied with an M12×1.75 thread, making the clamping screw suitable for standard metric nuts and threaded holes. What material is the clamping screw made from? The screw is manufactured from heat-treated steel, which enhances strength and wear resistance for repeated clamping cycles. Is the length suitable for shallow fixture assemblies? Yes; the 75 mm length and compact mass make the component well suited to confined or close-packed fixture arrangements. Which SKU should be ordered for this item? Order reference 1343M when specifying this Vertex clamping screw to ensure the correct thread and length combination. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75mm Clamping Screw M16x2P, Heat-Treated Steel - Vertex
Take advantage of robust heat-treated steel construction and a precise M16x2 thread for consistent, secure clamping; combine reliable performance with straightforward handling and order the clamping screw directly via Metav Werkzeuge or ask our consultants for application advice. Clamping screw 1353M — M16x2 thread, heat-treated steel (Vertex) A versatile Clamping screw 1353M designed for secure workholding and fixture applications in machine shops and assembly lines. Durable heat-treated steel construction M16x2 precision thread for secure clamping 75 mm length for deep engagement Compact weight 0.09 kg for easy handling Consistent clamping for repeatable setups The robust design ensures repeatable fixture performance across production runs. The M16x2 thread provides fine pitch engagement that resists loosening under vibration, while the heat-treated steel body maintains dimensional stability during repeated use. This combination reduces rework and minimises setup time, supporting higher throughput and consistent part quality. The fastening element is suitable for routine industrial use where reliability matters. Durable materials that cut downtime Made from heat-treated steel, the fastening component is built to withstand mechanical stress and wear. The treated surface improves fatigue resistance and prolongs service life compared with untreated fasteners. A lighter mass of 0.09 kg eases manual handling without compromising strength, and the 75 mm length ensures sufficient thread engagement for secure clamping in deeper fixtures. These characteristics translate into fewer replacements and less unplanned maintenance. Easy integration into existing jigs and fixtures The standard M16x2 specification allows direct replacement or integration into common clamping systems and machine fixtures. Installation is straightforward with conventional tools; torque requirements follow standard practice for the thread size and material class. The compact geometry and standard thread form support compatibility with a wide range of nuts, threaded inserts and tapped holes, enabling quick retrofits and streamlined inventory management for workshop environments. For advice on matching the Vertex clamping screw 1353M to specific fixtures or to confirm stock and delivery options, contact Metav Werkzeuge for a tailored recommendation and concise technical documentation. Technical data Article number: 1353M GTIN: 4061905094439 Manufacturer: Vertex Facts Length: 75 mm Weight: 0.09 kg Thread: M16x2P Special features Material: Heat-treated steel Suitable for machine and fixture clamping Brand: Vertex SKU: 1353M FAQ What material is the clamping screw made from? The clamping screw 1353M is manufactured from heat-treated steel, providing improved wear and fatigue resistance for industrial use. Which thread size does the product use? This Vertex clamping screw features an M16x2 precision thread suitable for standard tapped holes and compatible fasteners. What is the effective length of the screw? The overall length is 75 mm, chosen to ensure sufficient engagement for most fixture and workholding applications. How much does the clamping screw weigh? The weight of the clamping screw 1353M is 0.09 kg, making it easy to handle during setup and maintenance tasks. Is the screw suitable for use in vibrating environments? The precise M16x2 thread and heat-treated construction provide good resistance to loosening under vibration when used with correct torque and locking methods. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75mm Clamping Screw M18x2.5P Heat-Treated Steel, 0.12kg - Vertex
Robust clamping performance combined with precise metric threading and durable heat-treated steel makes this fastening solution ideal for workshop fixtures; order the clamping screw directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw 1363M — heat-treated steel, M18×2.5 thread (Vertex) The clamping screw 1363M is a compact industrial fastening element designed for secure fixture clamping in machining and assembly operations, offering a standard metric thread and a 75 mm overall length for stable engagement. Heat-treated steel construction M18×2.5 thread for secure fit 75 mm overall length Lightweight: 0.12 kg Secure hold for demanding fixtures The combination of a standard M18×2.5 thread and a 75 mm length delivers reliable axial engagement, reducing the risk of loosening under load. Manufactured from heat-treated steel, the fastener provides enhanced tensile strength and wear resistance compared with non-treated alternatives. This contributes to consistent clamping force over repeated cycles, so machinery setups and jigs remain dimensionally stable. The technical design is optimised for repeatable fixation rather than decorative use, focusing on performance where it matters. Ease of handling and integration into setups With a mass of just 0.12 kg, this fastening element minimises added weight to fixtures and tooling, simplifying handling during assembly and repositioning. The standard metric thread simplifies compatibility with existing threaded holes, nuts and clamping blocks commonly used in industrial workshops. As a dedicated clamping component, it supports quick installation and removal, which streamlines fixture changes and reduces machine downtime during production shifts. Durability through heat treatment and quality manufacturing The use of heat-treated steel enhances fatigue resistance and extends service life in cyclic clamping applications. Heat treatment increases hardness and improves the material’s ability to withstand mechanical stress, which is beneficial in repetitive production environments. Produced by Vertex, the component reflects established manufacturing standards and is intended for integration into professional clamping systems and industrial fixtures where longevity and reliability are required. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex clamping screw 1363M and ensure the correct fastener for the specific workshop application Technical data Article number: 1363M GTIN: 4061905089398 Manufacturer: Vertex Material: Heat-treated steel Facts Thread: M18×2.5 Length: 75 mm Weight: 0.12 kg Special features Clamping screw design Heat-treated steel construction Metric standard thread FAQ What material is the clamping screw made from? The clamping screw 1363M is made from heat-treated steel, which increases strength and wear resistance for industrial clamping use. Which thread does the fastener use and is it compatible with standard fixtures? The fastener uses an M18×2.5 metric thread, making it compatible with standard M18 threaded holes and components commonly found in workshop fixtures. How long is the clamping screw and how does length affect application? The overall length is 75 mm; this length provides sufficient engagement for secure clamping while remaining suitable for many fixture and jig configurations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75mm Clamping Toggle Clamp Vertical Base, Black Oxide Finish, 2.2kN Closing Force - Kukamet
Take advantage of the combination of compact mounting, high holding capacity and robust finish for reliable fixture work; order the clamp via Metav Werkzeuge or contact our consultants for application advice. Kukamet 332 Closure Toggle Clamp — Vertical-foot lever clamp with hook and 3,200 N holding force The Kukamet 332 is a vertical-foot toggle clamp designed for rapid, secure workpiece holding in fixtures, jigs and assembly stations. Vertical-foot mounting for compact fixtures High holding force: 3,200 N maximum Hook-equipped lever for secure engagement Blackened finish resists surface wear Reliable clamping performance that boosts throughput The Kukamet 332 delivers a holding force of 3,200 N with a clamping force of 2,200 N, values that translate into stable, repeatable retention of components during machining, welding or assembly. The forces cited are measurable specifications and indicate how firmly a workpiece is retained; higher holding force reduces the need for secondary supports, which in turn shortens cycle times and improves process consistency. The lever-operated mechanism is engineered for a positive mechanical lock, so the clamp remains closed under load and is released quickly when the operation is complete. Compact mounting and fast operation for versatile fixtures Fitted with a vertical base and a hook-equipped lever, this clamp is intended for space-conscious fixture layouts where vertical mounting is preferred. The 75 mm thread length allows for fine adjustment of engagement depth, while the low mass of 0.31 kg keeps added inertia to a minimum in moving assemblies. Because the design is lever-driven, actuation is immediate and ergonomic; the clamp can be integrated into manual or semi-automated production cells where repeatable, quick clamping and unclamping reduce operator effort and speed up part handling. Durable finish and straightforward maintenance for workshop longevity A blackened finish provides surface protection that resists everyday wear in workshop environments and gives the clamp a uniform appearance that is tolerant of light surface contamination. The robust lever and hook interface are simple to inspect; any required servicing is limited to routine checks and lubrication of pivot points, which keeps downtime low. The clamp’s construction is suited to standard industrial use in fixtures and jigs, offering a balance of durability and mechanical simplicity that supports long-term reliability. Contact Metav Werkzeuge to discuss how the Kukamet 332’s 3,200 N holding capacity and vertical-foot design can be integrated into existing fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and supply from Emmerich. Technical data Article number: B332-3 GTIN: 8680731508475 ECLASS: 21041718 Specifications Holding force: 3,200 N Clamping force: 2,200 N Thread length: 75 mm Weight: 0.31 kg Features Closure toggle clamp (lever clamp) design Blackened finish With hook Vertical-foot mounting FAQ What maximum holding force does this clamp provide? The Kukamet 332 closure toggle clamp (SKU B332-3) provides a maximum holding force of 3,200 N, which is suitable for secure retention in many fixture and assembly applications. How is the clamp mounted and adjusted? Mounting is via a vertical foot, and adjustment is achieved through the 75 mm thread length, allowing precise setting of the engaging height for the hooked lever. Is the clamp suitable for frequent workshop use? The lever-operated design combined with a blackened finish and robust hook makes the clamp appropriate for regular use in jigs and fixtures; routine lubrication of pivot points is recommended to maintain performance. How heavy and compact is the clamp for integration into fixtures? With a mass of 0.31 kg and a vertical-foot form factor, the clamp is compact and lightweight, which assists integration into space-limited fixture arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah. 10644 Sk. No: 61-63, 42050 Karatay / Konya, Turkey / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Closing Clamp Vertical Base With Hook, 2.2kN Thrust / 3.2kN Hold, Black Oxide Finish - Kukamet
Robust performance and compact design combine in a single clamping solution: a high holding force of 3,200 N, a maximum pressing force of 2,200 N, and a vertical-foot mounting for stable fixture set-ups. Lightweight construction at 0.335 kg and an integrated hook make this clamp suited for repetitive jigs and fast-change operations. Order directly via Metav Werkzeuge or consult Metav’s specialists for application advice and specification checks. Locking Lever Clamp 312 by Kukamet — 3,200 N holding force, vertical base A Locking Lever Clamp 312 engineered for quick, secure fastening in jig and fixture work, combining a vertical foot mounting and integrated hook for repeatable positioning. Vertical base for stable mounting Holding force up to 3,200 N Blackened finish for surface protection Integrated hook for secure latching Dependable clamping that keeps production moving The clamp delivers a decisive mechanical advantage through a lever mechanism, translating operator motion into a holding force of 3,200 N and a maximum pressing force of 2,200 N. This difference between pressing and holding forces means fixtures remain secure under load while the operator benefits from low actuation effort. The compact mass of 0.335 kg supports rapid handling and reduces inertial load on moving jigs. In practice, this results in shorter cycle times and fewer readjustments, which contributes directly to higher throughput and process stability. Designed for straightforward mounting and integration Featuring a vertical base for mounting, the latch clamp is suited to upright fixture plates and vertical jig faces. The supplied thread length of 75 mm provides sufficient engagement depth for common clamping bolts, enabling flexible attachment and precise alignment. An integrated hook facilitates positive latching with mating catches, reducing the need for additional parts. The combination of these design choices simplifies retrofitting into existing tooling and supports modular fixturing strategies in small to medium production runs. Durable finish and predictable behaviour over many cycles A blackened finish provides surface protection and a professional appearance while limiting glare in workshop lighting. The lever mechanism and hook are engineered for repetitive use, with mechanical limits that keep operation predictable and safe under instruction. The clamp’s straightforward mechanical design eases maintenance and replacement planning, allowing workshop managers to specify reliable components without overcomplicating inventory. Where consistency and repeatability are required, this latch is a practical choice for industrial clamping tasks. Contact Metav Werkzeuge for tailored clamp selection, quote requests or technical clarification on the Kukamet locking lever clamp (SKU B312-3) via eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data SKU: B312-3 GTIN: 8680731506761 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.335 kg Max pressing force: 2,200 N Max holding force: 3,200 N Thread length: 75 mm Special features Type: Locking lever / toggle latch clamp Mounting: Vertical foot Finish: Blackened Hook: Integrated Brand: Kukamet FAQ What holding and pressing forces does the clamp provide? The clamp offers a holding force of 3,200 N and a maximum pressing force of 2,200 N; these values describe the static retention and actuation pressure respectively for the Kukamet locking lever clamp (SKU B312-3). How is the clamp mounted to a fixture plate? Mounting is via the vertical foot; the clamp’s thread length of 75 mm allows secure bolting to upright plates or vertical faces typically found on jigs and fixtures. Is the finish suitable for workshop environments? The blackened finish resists surface wear and reduces glare, making it appropriate for standard workshop conditions where mechanical protection is required. Can the clamp be used for quick-change tooling and modular fixtures? Yes; the integrated hook and lever action enable rapid latch-and-release cycles, supporting modular fixturing and frequent component changes in production. What is the weight and handling characteristic of the latch? Weighing 0.335 kg, the clamp is lightweight for easy handling while still providing high clamping performance for repetitive operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Closure Clamp Horizontal Base With Safety Lock, Zinc Plated, Hook, Max Hold 3,200N - Kukamet
Combine secure holding, a galvanised finish and a compact horizontal mounting for dependable fixture performance; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Toggle Latch Clamp 351-3-L — galvanised, safety lock for horizontal mounting Kukamet 351-3-L is a robust toggle latch clamp designed for horizontal-base installation, offering secure closure and straightforward integration in production jigs and workshop fixtures. Horizontal base mount for stable installation Galvanised corrosion-resistant finish Safety lock for secure clamping Holding force up to 3,200 N Space-saving mounting with reliable corrosion protection The compact design of this toggle latch delivers a small installation footprint while providing a dependable clamping point for fixtures and doors. The galvanised finish protects the mechanism against corrosion in workshop environments, reducing downtime for maintenance and extending service life. With a net weight of 0.335 kg, the unit is easy to position and replace in assemblies where minimal added mass is required. The horizontal mounting arrangement simplifies alignment on flat surfaces and makes the component suitable for repetitive clamping tasks in production cells. Measured forces for secure and predictable clamping Designed for industrial use, the latch provides a defined closing force of 2,200 N and a holding force of 3,200 N, values that enable planners to calculate safety margins and fixture performance. The distinction between closing and holding force is important: closing force refers to the applied actuation force during engagement, while holding force indicates the maximum static load the engaged latch resists. These ratings support rational decisions when specifying clamps for repeatable assembly, welding or transport fixtures where predictable retention is essential. The model designation 351-3-L helps ensure the correct part is selected for such calculations. Built-in assurance: hook engagement and safety lock Operational safety is enhanced by a positive hook engagement and an integrated safety lock, which prevent unintended release under vibration or incidental loads. The mechanical lock engages automatically when the latch is closed, delivering an added layer of protection for secured components. This feature reduces the risk of workpiece movement during machining or handling and contributes to consistent process quality. Simple, tool-accessible locking and unlocking also maintain efficient cycle times on production lines. Straightforward installation and low-maintenance use Installation is tailored to horizontal fixtures, with a thread length of 75 mm allowing flexible fixing depth to match plates and frames. The zinc-treated body requires only minimal upkeep; routine inspection and occasional lubrication of pivot points are sufficient in most industrial settings. The latch’s construction and finish make it a practical choice for workshops and small-batch production alike, where durable, easy-to-fit hardware helps streamline fixture assembly and maintenance routines. Choose the Kukamet 351-3-L toggle latch clamp for robust, low-maintenance clamping; contact Metav Werkzeuge for ordering or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 351-3-L GTIN: 8680731502497 ECLASS: 21041718 ETIM: EC011973 Core technical data Closing force (max): 2,200 N Holding force (max): 3,200 N Thread length: 75 mm Weight: 0.335 kg Materials / Special features Galvanised Horizontal base mounting With hook With safety lock FAQ What load can the latch withstand during static use? The latch resists a holding force of 3,200 N when properly mounted; this value refers to the maximum static load the engaged hook can hold. Is the latch suitable for outdoor or humid environments? The galvanised surface provides corrosion resistance for workshop and moderately humid conditions; harsher atmospheres may require additional protection. How is the latch mounted to a fixture? Mounting is intended for a horizontal base; the 75 mm thread length allows secure fastening through plates and frames to accommodate different material thicknesses. Does the safety lock engage automatically? Yes, the integrated safety lock engages upon closure, preventing accidental release under vibration or incidental impact. Which SKU should be ordered for this configuration? Order the 351-3-L SKU for the galvanised toggle latch with hook and safety lock from Kukamet Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Closure Clamp Vertical Base Three-Point Clamp With Hook, Stainless Steel, 2.2kN Thrust - Kukamet
Benefit from robust stainless steel construction and a 3,200 N maximum holding force for dependable clamping in demanding workflows; combine durable materials, compact mounting and a hooked latch for secure transport and fixture applications — order the closure clamp 312 directly via Metav Werkzeuge or ask our consultants if needed. Closure clamp 312 — Stainless steel toggle latch with hook and vertical-foot mounting (Kukamet) A robust closure clamp 312 designed for secure over-centre holding in fixtures, transport attachments and quick-release applications. Stainless steel construction Max holding force 3,200 N Closing force up to 2,200 N Vertical-foot mount with hook Secure clamping performance that reduces rework The design focuses on measurable performance: a max holding force of 3,200 N combined with a closing force of 2,200 N results in dependable retention under dynamic loads. These values translate into fewer loose parts during transport and a lower risk of workpiece displacement in jigs and fixtures. The over‑centre mechanism converts lever motion into a consistent clamping action, ensuring repeatable results and easier process validation when integrative fixtures require documented holding capacities. Compact mounting for flexible integration With a vertical‑foot mounting arrangement and a thread length of 75 mm, the clamp integrates with limited mounting space and standard fixture plates. The compact footprint and hooked latch version allow secure engagement with a variety of mating catches and keepers, simplifying retrofits and reducing fixture redesign. Installation requires only conventional fastenings to the vertical foot, which helps speed up assembly time and minimises downtime during tool changes or maintenance. Corrosion resistance and low maintenance for long service life Constructed from stainless steel, the mechanism provides enhanced corrosion resistance where humidity or light contamination is present. The material choice reduces the need for frequent replacement and supports continuous operation with minimal upkeep, contributing to lower total cost of ownership. For shops aiming to standardise on durable components, this clamp offers a resilient option that aligns with quality‑driven procurement strategies and steady production output. Practical details that support shopfloor efficiency Lightweight at 0.335 kg yet robust in function, the clamp is supplied in the hooked configuration and marked as SKU S312-3, facilitating inventory control and reordering. The latch’s straightforward geometry makes it compatible with common catch plates and mounting patterns, while the stainless construction keeps cleaning and inspection routines simple. Technical documentation and a product sheet are available in the attached catalogue for quick reference during layout planning. For specification checks or procurement advice on Kukamet toggle solutions, contact Metav Werkzeuge for tailored recommendations and reliable supply of the closure clamp 312 (SKU S312-3) via info@metav-werkzeuge.com or by phone — Metav’s specialists will advise on fixture compatibility and delivery options. Technical data Article number: S312-3 GTIN: 8680731509410 Brand: Kukamet Material: Stainless steel Facts Max pressing force: 2,200 N Max holding force: 3,200 N Weight: 0.335 kg Thread length: 75 mm Special features Mounting: Vertical foot Hook: Included ETIM: EC011973 EClass: 21041718 FAQ What load can the clamp handle in industrial fixtures? The closure clamp 312 from Kukamet is specified with a maximum holding force of 3,200 N; the SKU S312-3 is therefore suitable for medium‑duty fixture and transport securing tasks where this retention level is required. Is the clamp suitable for outdoor or humid environments? Yes, the Kukamet closure clamp 312 is made of stainless steel, which provides good corrosion resistance and makes the S312-3 appropriate for environments with occasional moisture or light contamination. How is the clamp mounted to a fixture plate? The clamp uses a vertical‑foot mounting arrangement and a 75 mm thread length, enabling straightforward attachment to standard fixture plates or vertical supports without special adapters. Does the hooked version work with standard catch plates? The hooked latch on the S312-3 is designed for compatibility with common catch plates and keepers; matching the plate geometry ensures secure engagement and repeatable clamping. What maintenance is required to keep the clamp operational? Routine inspection and light lubrication of the pivot points are typically sufficient for the Kukamet closure clamp 312; stainless steel construction minimises corrosion and helps reduce maintenance intervals. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm E1 Toolholder For Indexable Drill With 32mm Shank, DIN 69880 - TECWERK
Combining the DIN 69880 interface, a VDI30 shank and a 32 mm clamping diameter, this holder provides a stable, repeatable connection for indexable‑insert drilling applications. Order the TECWERK Form E1 tool holder directly via Metav Werkzeuge or consult our specialists for application‑specific recommendations. TECWERK Tool holder for indexable‑insert drills »E1« — VDI30, DIN 69880, 32 mm clamping A TECWERK tool holder (Form E1) designed for indexable‑insert drills, compatible with DIN 69880 spindles and VDI30 tool interfaces for precise drilling and turning with internal coolant capability. Form E1 compliant with DIN 69880 VDI30 shank for robust spindle interface 32 mm clamping diameter for insert drills Internal coolant feed for effective cooling Reliable interface for repeatable machining quality The Form E1 design, realised to DIN 69880 tolerances and paired with a VDI30 shank, creates a stable connection that reduces runout and vibration during drilling cycles. This stability improves repeatability across batches and lowers the risk of premature insert wear. Because the holder secures the cutting assembly with a defined clamping diameter of 32 mm, setup times are shortened and process deviations are minimised, which translates directly into higher first‑pass yield and consistent bore quality. Integrated coolant and improved tool life An internal coolant provision channels cutting fluid directly to the insert zone, enhancing cooling and chip evacuation. The internal coolant feed reduces thermal load on the insert and improves surface finish, especially in deep or interrupted drilling. For users unfamiliar with the term: internal coolant means the coolant is delivered through the holder and tool body to the cutting edge, rather than being directed externally; this is more efficient for heat removal and helps extend tool life while maintaining cutting performance. Straightforward compatibility with existing toolrooms Designed for indexable‑insert drills and turning tools, the holder fits standard VDI interfaces and a wide range of machine spindles, enabling quick integration into established setups. The combination of VDI30 and compliance with DIN standards simplifies tool selection and interchangeability, reducing the need for extensive rework of tool change procedures. Labelling and dimensional conformity support predictable mounting behaviour and make the holder suitable for mixed‑fleet environments where consistency and uptime matter. Engineered for industrial workflows and reliability Built with production use in mind, the unit supports continuous machining cycles and suits demanding shopfloor conditions where precision and throughput are priorities. By coupling a standardised interface with internal coolant capability and a dedicated clamping diameter, the design balances rigidity, cooling efficiency and serviceability—factors that matter for high‑volume parts runs. Metav’s distribution from Emmerich acts as an additional quality filter, ensuring dependable supply and consistent product specification for industrial and trade customers. For a reliable upgrade to precision drilling operations, request tailored advice from Metav Werkzeuge and arrange supply of the TECWERK Form E1 holder from our Emmerich quality hub Technical data Article number: 2000833664NW SKU: 2000833664NW Form: E1 Product type: Tool holder for indexable‑insert drills Label: Werkzg.h.E1 DIN 69880 Spann‑D.32mm VDI30 z.Wendeplattenbohrer TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Clamping diameter (d2): 32 mm h1: 28 mm Clamping seat diameter (d1): 30 mm d3: 52 mm h2: 30 mm l3: 22 mm d6: 68 mm l1: 75 mm Form: E1 Standard: DIN 69880 Special features Suitable for indexable‑insert drills Cylindrical shank For drilling and turning tools with internal coolant feed Interface: VDI30 Designed for DIN 69880 compatibility FAQ What machines is this holder compatible with? This holder fits spindles and turret interfaces that accept VDI30 tooling; compatibility is ensured by its DIN 69880 form and standardised dimensions. Can the holder support internal coolant supply? Yes. The holder is specified for drilling and turning tools with internal coolant feed to the cutting edge, improving cooling and chip control. Which clamping diameter is required for the intended drills? The unit secures tools with a 32 mm clamping diameter, matching common indexable‑insert drill requirements for this size class. Is the Form E1 design suitable for production cycles? The Form E1 configuration and VDI interface provide the rigidity and repeatability required for continuous production and high‑volume machining. Can the holder be used for turning operations as well as drilling? Yes; the holder supports tools intended for both drilling and turning where a VDI30 interface and DIN 69880 form are applicable. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
75mm E2 Tool Holder For 16mm Boring Bars Through-Coolant, DIN 69880 - TECWERK
Take advantage of high‑precision clamping with integrated coolant and a through‑bored design for reliable chip evacuation; combine this with DIN standard conformity for straightforward integration into VDI systems. Order the holder directly via Metav Werkzeuge or contact our consultants for application advice. TECWERK Tool holder for drill bars E2 – VDI40, through‑bored with coolant supply A TECWERK Tool holder for drill bars E2 that secures 16 mm bars with a VDI40 interface for stable boring and internal/external coolant delivery in standard DIN 69880 applications. Through‑bored for coolant flow and chip removal Compatible with 16 mm boring bars and cylindrical shank Form E2 with VDI40 interface for precise clamping No shortening of the boring bar required Reliable concentricity for consistent bore quality The holder is designed for stable clamping on VDI tool turrets, delivering reduced runout and repeatable results. With the VDI40 interface and Form E2 geometry the holder supports accurate alignment of the bar, translating into fewer rework cycles and improved process reliability. The combination of standard conformity (DIN 69880) and a defined clamping diameter of 16 mm helps maintain consistent hole tolerances across production runs. Efficient coolant routing for longer tool life A through‑bored design with internal and external coolant supply ensures effective flushing at the cutting zone. This reduces heat build‑up and promotes chip evacuation, which in turn extends insert and bar life and supports deeper or interrupted cuts. Because the bar does not need to be shortened, set‑up time is reduced and maintenance is simplified, resulting in more productive machining cycles. Seamless integration and straightforward setup Conformance to DIN standards and the classic VDI40 interface allow easy adoption in existing turret and holder systems. The cylindrical shank and the specified dimensions support quick assembly on compatible machines, enabling rapid changeover. The documented geometry provides a verifiable basis for fixture planning and quality control without the need for custom adaptations. Built for workshop efficiency and proven supply The through‑bored configuration and compatibility with standard boring bars mean less downtime and fewer adjustments during production. The holder’s features are aimed at stabilising machining processes while keeping workflow efficient; the design supports reliable coolant delivery and easy replacement of bars when required. Metav’s distribution ensures availability and a consistent quality filter for European workshops. For precision clamping with through‑cooling and DIN‑standard compatibility, contact Metav Werkzeuge for application guidance and to source the TECWERK holder directly. Technical Data Article number: 2000833681NW Product type: Tool holder for drill bars Brand: TECWERK Form: E2 Standard: DIN 69880 Facts Clamping diameter (d2): 16 mm h1: 32.5 mm d1: 40 mm d8: 55 mm l6: 75 mm l3: 22 mm d6: 83 mm Through‑bored: yes Interface: VDI40 Special features Internal and external coolant supply No shortening of the boring bar necessary Cylindrical shank Suitable for boring bars FAQ What bar diameter does the holder accept? The holder accepts a 16 mm bar clamping diameter as indicated by the specification for this TECWERK tool holder (SKU 2000833681NW). Is coolant supplied through the holder? Yes, the holder features both internal and external coolant supply and a through‑bored design to deliver cooling directly to the cutting zone. Does the bar need to be shortened before use? No shortening of the boring bar is required for this holder; the through‑bored configuration allows the bar to be used as supplied. Which standard and interface does the holder follow? The holder conforms to DIN 69880 and uses a VDI40 interface with Form E2 geometry for compatibility with standard turret systems. What material is the holder made from? The product data does not specify the holder material. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
75mm E2 Tool Holder For Boring Bars Through-Coolant 8mm, DIN 69880 - TECWERK
Take advantage of the combination of precise coolant routing, standardised mounting and secure clamping for uninterrupted drilling cycles; the unit’s through-drilled design with both internal and external coolant supply and a Form E2 interface ensures consistent performance and reduced setup time. Order the toolholder directly via Metav Werkzeuge or consult the advisers if further specification is required. Toolholder for drill bars »Form E2, clamping diameter 8 mm, VDI40« – TECWERK The Toolholder for drill bars »Form E2, clamping diameter 8 mm, VDI40« is a DIN 69880-compliant toolholder designed for secure clamping of drill bars, offering through-drilled coolant routing and a cylindrical shank for stable mounting. Through-drilled for internal coolant Form E2, VDI40 mounting interface No shortening of drill bar required Clamping diameter 8 mm (d2) Precision clamping that keeps cycles running The holder delivers repeatable clamping with a clamping diameter 8 mm and a robust cylindrical shank, reducing runout and minimising rework. By adhering to DIN 69880 and the VDI40 interface, the design enables straightforward integration into turret systems and machining centres. The combination of standard conformity and tight tolerances translates into fewer tool changes and predictable machining times, which supports productivity targets and lowers per-part labour overheads. Coolant routing for reliable chip evacuation and tool life A through-drilled configuration with both internal and external coolant supply maintains a stable cutting environment and improves chip evacuation at the cutting edge. This routing reduces heat concentration and diminishes built-up edge, extending tool life and preserving hole quality. For operations that prioritise surface finish and dimensional stability, the integrated coolant channels provide an operational advantage by sustaining cutting parameters for longer periods without manual intervention. Straightforward compatibility and reduced setup complexity Designed for drill-bar applications, the unit fits standard drill bars and avoids the need for shortening, so existing tooling stocks can be used without modification. Key dimensions such as a 75 mm projection length, a 40 mm shank diameter and a compact head profile ensure compatibility with common tool holders while keeping access clear in confined setups. The result is faster set-ups, fewer inventory variants and easier process planning for workshops aiming to simplify tooling logistics. For TECWERK tooling enquiries or to arrange an exact-match specification, contact Metav Werkzeuge GmbH in Emmerich — technical advice and order processing are available via info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 2000833678NW Product type: Toolholder for drill bars Brand: TECWERK Standard: DIN 69880 Core dimensions Form: E2 Clamping diameter d2: 8 mm Shank diameter d1: 40 mm Outer diameter d6: 83 mm Diameter d8: 55 mm Projection length l6: 75 mm Head length l3: 22 mm Height h1: 32.5 mm Design & functions Through-drilled: yes Coolant supply: internal and external Shank type: cylindrical Compatible with: drill bars Mounting interface: VDI40 Shortening of drill bar: not required FAQ Is the holder compatible with standard drill bars? Yes. The toolholder for drill bars (TECWERK, SKU 2000833678NW) is designed for use with standard drill bars and secures an 8 mm clamping diameter without modification. Does the toolholder support internal coolant supply? Yes. The holder is through-drilled and provides both internal and external coolant supply for improved cooling and chip evacuation. Is it necessary to shorten drill bars before use? No. The design specifies that no shortening of the drill bar is required, which preserves existing tooling and reduces set-up time. Which standards and mounting interfaces are used? The holder conforms to DIN 69880 and uses a Form E2 arrangement with a VDI40 mounting interface for compatibility with common turret and spindle systems. What are the key dimensions to consider for installation? Important dimensions include clamping diameter 8 mm (d2), shank diameter 40 mm (d1), projection length 75 mm (l6) and outer diameter 83 mm (d6); these values guide machine integration. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
75mm E2 Tool Holder For Boring Bars Through-Coolant Cylindrical Shank DIN 69880 - TECWERK
Taking advantage of a proven DIN 69880 interface and a compact VDI40 shank, the holder combines precise clamping with uninterrupted coolant supply to reduce setup time and improve bore quality. Order the tool holder via Metav Werkzeuge or contact the consultants for technical assistance. Tool holder E2 (VDI40) – DIN 69880, clamping Ø12 mm (TECWERK) A Tool holder E2 (VDI40) engineered for secure mounting of boring bars, providing internal and external coolant supply for CNC boring and turning operations. Internal and external coolant supply Through-drilled coolant passage VDI40 cylindrical shank, Form E2 Clamping diameter 12 mm, DIN 69880 Stable clamping for concentric bores and reduced runout The holder delivers reliable mechanical support for boring bars by combining a VDI40 interface with an E2 geometry that is optimised for axial stability. The clamping diameter 12 mm secures the bar with minimal play, which improves concentricity and reduces runout during high-precision machining. For shops upgrading spindle tooling, this results in fewer rejects and more consistent surface finishes without complex alignment procedures. Coolant routing that keeps chips away and tools cool Integrated internal and external coolant supply plus a through-drilled passage allow coolant to reach the cutting edge directly. This design removes the need to shorten the boring bar for coolant access, preserving bar length and rigidity. By flushing chips from the cutting zone and maintaining cutting temperatures, the system extends tool life and stabilises process parameters, supporting higher material removal rates with fewer interruptions. Straightforward integration into existing DIN-compliant setups Designed to DIN 69880 standards, the holder fits established toolposts and turrets while requiring minimal adaptation. The cylindrical shank with d1: 40 mm and installation length l6: 75 mm aligns with common VDI40 tool stations, enabling quick changeover between holders. Clear geometric references streamline inventory management and tool configuration in production environments focused on repeatability and predictable cycle times. Low maintenance, long-term workshop reliability The through-drilled configuration and robust E2 design minimise additional maintenance steps: there is no need for customised bar modification and flushing channels are self-contained. This simplicity reduces machine downtime and keeps fixtures serviceable with standard workshop procedures. Combined with proven material interfaces and standardised dimensions, the holder supports continuous production in demanding turning and boring applications. For specification checks or to integrate the TECWERK Tool holder E2 into an existing setup, request technical advice from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000833680NW Manufacturer: TECWERK Product type: Tool holder for boring bars Form: E2 Standard: DIN 69880 Facts Clamping diameter d2: 12 mm Shank diameter d1: 40 mm Outer diameter d8: 55 mm Installation length l6: 75 mm Head length l3: 22 mm Head diameter d6: 83 mm Height h1: 32.5 mm Special features Internal and external coolant supply Through-drilled execution Suitable for boring bars Cylindrical shank, VDI40 compatible No shortening of boring bar necessary FAQ How does the coolant flow reach the cutting edge? The holder uses an internal and external coolant supply with a through-drilled passage so coolant is delivered directly along the boring bar to the cutting zone, improving cooling and chip evacuation for the TECWERK tool holder E2. Is shortening of the boring bar required for coolant access? No; the through-drilled design eliminates the need to shorten the bar, which preserves bar rigidity and length for longer reach in machining operations. Which interface standard does this holder follow? The holder complies with DIN 69880 and uses a VDI40 cylindrical shank, allowing integration into standard VDI40 tool stations without special adapters. What clamping diameter and shank dimensions are provided? Clamping diameter is 12 mm (d2: 12 mm) and the shank diameter is 40 mm (d1: 40 mm); other key dimensions include l6: 75 mm and d8: 55 mm for installation planning. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
75mm M14x2P Clamping Screw, Heat-Treated Steel - Vertex
Take advantage of the combination of a standard M14×2 thread, a 75 mm shaft and heat‑treated steel for reliable fixture performance and long service life. Order the clamping screw directly via Metav Werkzeuge or ask our consultants for application advice. Clamping screw 1343MA – M14×2, 75 mm shaft, heat‑treated steel (Vertex) A clamping screw designed for secure fixture of workpieces in machining and clamping systems. M14x2 metric thread for standard fittings 75 mm shaft length for deep clamping Heat-treated steel for high strength Secure hold for repeatable setups The Clamping screw 1343MA delivers a consistent, repeatable clamp point for jigs, vises and bespoke clamping fixtures. The M14×2 metric thread fits common clamping mounts and enables reliable torque transfer, which contributes to consistent clamping force and reduced setup variation. This makes the fastener suitable where repeatability and quick changeovers are required in a production environment. Engineered for strength and predictable wear Manufactured from heat‑treated steel, the fastener is designed to endure cyclic loads and resist deformation during repeated tightening. Heat treatment increases surface hardness and improves fatigue resistance, so the component maintains its clamping geometry over many cycles. The material choice supports long service intervals and reduces the need for frequent replacement, helping to keep equipment uptime high. Compatibility with industry-standard fixtures for fast integration The standardised M14×2 thread and a 75 mm overall length allow straightforward integration with existing clamping systems and female threads commonly found in fixtures and machine tables. Using a metric standard thread simplifies inventory management and avoids the need for adapters, supporting more efficient maintenance and fewer spare‑part variants on the workshop shelf. Quick installation and dependable retention Designed for straightforward installation with standard tools, the clamp bolt provides immediate retention without complex assembly steps. The combination of a standard thread and a robust shaft diameter ensures dependable retention under lateral and axial loads typical of machining and assembly tasks. Where rapid fixture changes are necessary, the fastener contributes to reduced downtime and smoother workflow. Low-maintenance choice for busy workshops With a compact mass of 0.07 kg and a straightforward design, this clamp bolt is a low‑maintenance component that requires only routine inspection. The simple geometry facilitates cleaning and visual checks, while the heat‑treated material contributes to long life in high‑use applications. For purchasing and logistics, the component’s standard dimensions simplify stocking and reorder processes. For reliable clamping hardware from Vertex, contact Metav Werkzeuge for ordering and tailored advice; Metav’s specialists in Emmerich can provide application guidance and rapid supply coordination via info@metav-werkzeuge.com or by phone Technical data Article number: 1343MA GTIN: 4061905090448 Manufacturer: Vertex Weight: 0.07 kg Facts Thread: M14 x 2 pitch Length: 75 mm Special features Material: Heat-treated steel Eclass: 21022190 Designation: Clamping screw FAQ What thread specification does this clamping screw use? The clamping screw is supplied with an M14×2 metric thread, which is the standard pitch used for many industrial clamping fixtures. Is the fastener suitable for repeated tightening and release? Yes, the heat-treated steel construction of the 1343MA provides improved fatigue resistance and dimensional stability for repeated tightening cycles. What is the overall length and mass of the component? The component has a 75 mm length and a mass of 0.07 kg, making it compact and easy to handle during fixture changes. Can this clamp bolt be used with standard machine table threads? The M14×2 thread and standard geometry allow direct use with many common clamping mounts and machine table accessories without the need for custom adapters. How does this product support workshop efficiency? By using a standard thread and a robust, low‑maintenance design, the fastener reduces inventory complexity and supports faster setup changes, contributing to smoother production flow. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75mm M20x2.5P Clamping Screw Heat-Treated Steel, Threaded Shaft - Vertex
Take advantage of a robust combination of heat-treated steel construction and a standard M20 × 2.5 metric thread for dependable fixture clamping; the compact 75 mm length and light 0.15 kg mass support accurate assembly without excess bulk. Order the clamping screw directly via Metav Werkzeuge or ask the consultants if additional details are required. Clamping screw 1373M — M20 × 2.5 thread, 75 mm, Vertex The clamping screw 1373M is a precision fastener designed for secure workpiece clamping in fixtures, jigs and general workshop assemblies where a reliable metric connection is required. Heat-treated steel for high strength Metric M20 × 2.5 thread specification 75 mm overall length for deep clamping Lightweight at 0.15 kg for easy handling Consistent clamping force from a heat-treated design The primary advantage of a heat-treated steel design is reduced deformation under load, delivering consistent clamping force in repeated cycles. The M20 × 2.5 designation identifies a 20 mm nominal thread diameter with a 2.5 mm thread pitch; this standard metric specification ensures compatibility with common nuts and threaded ports in clamping systems. In practical terms, the robust material and standard thread reduce the likelihood of thread wear and enable predictable torque application, supporting stable fixture performance across production runs. Compact dimensions for flexible workshop integration A length of 75 mm makes this clamping bolt well suited to medium-depth clamping applications, where a balance between reach and compactness is required. The modest weight of 0.15 kg minimises inert mass during handling and contributes to easier positioning in manual or semi-automated set-ups. The component’s standard metric threading simplifies procurement and replacement planning, while the clear specification supports CAD part lists and ordering systems. Integration into existing assemblies is straightforward thanks to the universal metric format and the manufacturing tolerances associated with Vertex tooling. Low-maintenance durability for reliable uptime Heat treatment increases hardness and wear resistance, which in turn extends service intervals and reduces the frequency of replacement parts in a busy workshop. Regular visual inspection and basic thread care—cleaning and light lubrication where applicable—maintain operational reliability. The straightforward geometry of this clamp bolt minimises potential failure points, helping to preserve fixture geometry and production repeatability. Where traceability is required, the Vertex brand and the 1373M SKU allow easy cross-referencing in stock records and maintenance documentation. Choose the Vertex clamping screw 1373M for proven mechanical integrity and straightforward integration — contact Metav Werkzeuge for tailored advice and reliable supply. Technical Data SKU: 1373M GTIN: 4061905094460 Manufacturer: Vertex Material: Heat-treated steel Thread: M20 × 2.5 Length: 75 mm Weight: 0.15 kg Measured Data Nominal diameter: M20 Thread pitch: 2.5 mm Overall length: 75 mm Mass: 0.15 kg Applications & Features Brand: Vertex EClass: 21022190 Suitable for fixture and jig clamping Images available: main photo, detail view, technical drawing FAQ What thread specification does this clamping screw use? The clamping screw is specified as M20 × 2.5, indicating a 20 mm nominal diameter with a 2.5 mm pitch; this is a standard metric thread used in many clamping fixtures. Which material is the fastener made from? The component is made from heat-treated steel, chosen to provide enhanced hardness and resistance to deformation under clamping loads. Is the length suitable for deep clamping on typical fixtures? With an overall length of 75 mm, the fastener provides sufficient reach for medium-depth clamping tasks while remaining compact for tight assemblies. How heavy is the part and what does that mean for handling? The fastener weighs 0.15 kg, which keeps handling straightforward and reduces added inert mass in manual or semi-automated setups. Can the part be identified in inventory systems? Yes, the item is listed under SKU 1373M and GTIN 4061905094460 for unambiguous identification and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
75mm Toggle Clamp Horizontal Base With Hook, 2.2kN Closing Force, Zinc Plated - Kukamet
Take advantage of the combination of robust holding capacity, corrosion-resistant galvanised steel and a compact horizontal base for secure, space-saving fixture integration; order the closure clamp directly via Metav Werkzeuge or consult our specialists for application advice. Closure clamp 351 — Hooked lever clamp, galvanised (Kukamet) The Closure clamp 351 is a hooked lever clamp designed for reliable securing of covers, panels and fixtures in industrial and workshop applications, mounted via a horizontal base foot for compact installation Galvanised surface for corrosion protection Holding force up to 3,200 N Clamping force up to 2,200 N Horizontal base foot for stable mounting Hooked lever for secure closure Consistent clamping performance that supports production flow The clamp delivers a measurable combination of clamping force and holding force, with a maximum clamping force of 2,200 N and a holding capacity of 3,200 N, which provides clear evidence of its load capabilities. These values allow planners and technicians to match the clamp to specific fixture loads and safety factors; the distinction between the dynamic clamping action and the static holding capacity is explained so that the component can be specified with confidence. The compact mass of 0.335 kg and the thread length 75 mm enable straightforward integration into existing jigs and fixtures while keeping added inertia low. Built for durability in demanding workshop environments A galvanised finish gives the product enhanced resistance to surface corrosion in humid or workshop atmospheres, extending service life where maintenance intervals are short. The combination of a horizontal base foot and a hooked lever creates a low-profile locking solution that resists unintended disengagement while occupying minimal space on a fixture face. Constructed from galvanised steel, the clamp is suitable for repeated actuation and offers predictable mechanical behaviour over many cycles, helping to reduce downtime and spare-part logistics in serial production. Fast fitting and low-maintenance integration for fixture designers Mounting is simplified by the horizontal foot arrangement, which permits a flush attachment to layouts where vertical clearance is limited; the hooked closure requires only basic alignment and the specified thread length of 75 mm for adjustments. Lightweight and compact, the device is easy to handle during assembly and replacement, cutting installation time on the shop floor. Routine inspection is limited to visual checks of the galvanised surface and the hook engagement; lubrication or adjustment can be performed without specialised tools, supporting uninterrupted operation in high-throughput environments. For a robust, galvanised clamping solution from Kukamet, contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our specialists will assist with suitability and ordering Technical data Article number: 351-3 SKU: 351-3 GTIN: 8680731502480 Facts Weight: 0.335 kg Clamping force (max): 2,200 N Holding force (max): 3,200 N Thread length: 75 mm Special features Material: galvanised steel Mounting: horizontal base foot Closure type: hooked lever with hook included eClass: 21041718 ETIM: EC011973 Category: clamps FAQ What maximum load can this clamp hold? The clamp provides a holding force of up to 3,200 N; the closure action offers a clamping force of up to 2,200 N, values suitable for many fixture and panel applications using the Closure clamp 351. Is the finish suitable for humid workshop conditions? Yes, the galvanised surface of the Closure clamp 351 offers corrosion protection appropriate for workshop and industrial environments, reducing the need for frequent replacement. How is the clamp mounted to a fixture? The unit is designed for mounting via a horizontal base foot; the supplied thread length of 75 mm allows adjustment and straightforward attachment to plates or frames. Can the clamp be used for serial production jigs? Its compact design, predictable force ratings and galvanised construction make the clamp well suited to repetitive use in jigs and fixtures for serial production. What maintenance is required? Maintenance is minimal: periodic visual inspections of hook engagement and the galvanised finish are normally sufficient, with lubrication or minor adjustment possible without specialised tools. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com