Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
8mm ER 32 Collet Precision Clamping, 5 µm Runout Accuracy, L 40mm - TECWERK
Combine high-precision runout of 5 µm with full-length tool support and DIN 6499‑B compatibility for reliable clamping in production environments; order the collet directly via Metav Werkzeuge or ask our consultants if needed. TECWERK ER 32 collet (ER 32/470 E) — 8 mm clamping diameter A TECWERK ER 32 collet (ER 32/470 E, 8 mm) is a precision clamping element for ER collet chucks, engineered for consistent runout control and secure tool retention in milling and drilling applications Precision runout ≤ 5 µm Full-length tool retention DIN 6499‑B compatible 8 mm clamping diameter, L 40 mm High-precision clamping for consistent production results The ER collet delivers precision where it matters: with a documented runout and repeatability of 5 µm, this clamping sleeve reduces vibration and tool deflection, improving surface finish and tool life. Built to the DIN 6499‑B standard, the component provides a verifiable basis for repeatable setup in batch production. By converting this technical accuracy into measurable process stability, the collet helps to shorten rework cycles and supports predictable machining tolerance achievement. Secure grip and extended support prevent tool movement Designed to hold tools along the full clamping length, the clamping element ensures uniform pressure distribution and minimises radial runout during cutting operations. The ability to clamp on the guiding chamfer adds practical flexibility when seating tools of varying shank profiles. These characteristics mean fewer tool changes due to slippage and a lower risk of concentricity loss, which in turn raises throughput and reduces unexpected machine downtime. Compact dimensions with workshop-friendly installation With a clamping diameter of 8 mm, an overall length of 40 mm and an outer diameter of 33 mm, the collet integrates easily into standard ER 32 collet chucks. The nominal clamping bridging of nominal −1.0 mm allows reliable gripping across the specified tolerance range without additional spacers. The compact form factor supports tight setups in crowded toolholders while maintaining the mechanical stability required for medium-duty milling and drilling tasks. Clear specification and compatibility reduce procurement risk Compliance with DIN 6499‑B and the explicit mechanical data make the product straightforward to specify for purchasing and quality assurance. As a standard ER 32 accessory, the component is compatible with typical ER collet chucks, simplifying stockkeeping and replacement procedures. The documented metrics—such as 5 µm runout, 40 mm length and 33 mm outer diameter—offer a concise verification checklist for incoming inspection and fixture planning. Discuss the TECWERK ER 32 collet and its 5 µm runout capability with Metav Werkzeuge to confirm fitment and application suitability—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832944NW Type: ER 32 Product: ER collet Manufacturer: TECWERK Packaging unit: 1 Core specifications Clamping diameter: 8 mm Length (L): 40 mm Outer diameter (D): 33 mm Runout / repeatability: 5 µm Clamping diameter bridging: nominal −1.0 mm Special features DIN 6499‑B compliance Fits ER collet chuck Held along full clamping length Can be clamped on the guiding chamfer FAQ What level of runout can be expected from this collet? The TECWERK ER 32 collet is specified with a runout and repeatability of 5 µm, which supports high-precision machining and consistent concentricity. Is this collet compatible with standard ER 32 chucks? Yes, the component is designed to DIN 6499‑B and fits standard ER 32 collet chucks, making it suitable for common toolholding systems. Can tools be clamped on the lead chamfer with this collet? The collet allows clamping on the guiding chamfer, enabling secure seating of tools with varied shank geometries. What are the physical dimensions relevant for fixture planning? Key dimensions are 8 mm clamping diameter, 40 mm length and 33 mm outer diameter, which should be considered during holder and spindle integration. How much clamping range is bridged by the collet? The clamping diameter bridging is specified as nominal −1.0 mm, indicating the effective gripping range relative to the nominal diameter. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm ER Collet Precision Clamping, 5 µm Runout, L 27mm - TECWERK
Data inconsistency detected: the item is described in one place as an ER 11 collet while the product label and listed dimensions correspond to an ER 16 collet (nominal clamping diameter 8 mm, length 27 mm, outer diameter 17 mm). These conflicting specifications prevent the creation of a reliable, standards‑compliant product description. This discrepancy could lead to confusion or errors in applications where precise specifications are critical. Please provide corrected, consistent data—confirm the collet series and the exact dimensions—so an accurate EN‑GB technical and commercial description can be produced, ensuring clarity and compliance with relevant technical standards and customer expectations.
8mm ER16 Collet With 6.2mm Internal Square For Thread Cutting, 15µm Runout - TECWERK
The compact design and proven runout specification make this collet a dependable choice for precision clamping: its clamping diameter of 8 mm and runout of 15 µm deliver repeatable concentricity for toolholding and thread‑cutting tasks. Order the collet directly via Metav Werkzeuge or ask our consultants if needed. TECWERK ER 16-GB collet – clamping diameter 8 mm, internal square drive 6.2 mm The ER 16-GB collet is a DIN‑compliant clamping sleeve designed for secure toolholding and thread‑cutting operations in workshop and production environments. DIN 6499 with internal square Clamping diameter 8 mm Runout 15 µm for high concentricity Length 27.5 mm, compact design Precision concentricity for reliable machining The design prioritises repeatable accuracy: with a specified runout of 15 µm, this clamping sleeve maintains concentricity under normal operating conditions, reducing tool wear and improving surface finish. The specification is intended for users who require measurable stability during rotation; the DIN 6499 compliance and the internal square drive ensure that torque transfer during thread cutting is consistent, while the clamping geometry controls radial deflection for cleaner results. Secure clamping and thread‑cutting capability Equipped with an internal square, the collet suits both ER collet chucks and thread‑cutting collet chucks, enabling controlled torque transmission when tapping or forming threads. The combination of the GB variant and the square drive is particularly useful when axial forces and rotational torque must be transferred without slippage. This results in safer threading operations and minimises the need for rework, supporting higher process uptime in toolrooms and maintenance shops. Compact dimensions for versatile toolholding With a total length of 27.5 mm and a clamping diameter of 8 mm, the component fits into compact toolholders where space is limited. The small footprint makes it suitable for fine finishing, small‑part machining, and setups where multiple tools are arranged closely. The internal square measures 6.2 mm, matching standard GB specifications and enabling compatibility with dedicated thread‑cutting fixtures and ER‑type chucks. Practical benefits for workshop workflows Specified as a Type ER‑GB collet, this sleeve offers a pragmatic balance between accuracy and ease of replacement. The predictable runout and standardised interface simplify inventory and reduce setup time when swapping tools. For procurement and planning, the compact format and DIN conformity support consistent machine setup across multiple centres, helping to maintain steady throughput and product quality without elaborate calibration routines. For TECWERK clamping solutions, contact Metav Werkzeuge for expert advice and fast supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930; Metav’s specialists will advise on suitable collets and delivery options. Technical data Article number: 2000834953NW Type: ER 16-GB Product: Collet (GB variant) Facts Clamping diameter: 8 mm Square drive: 6.2 mm Length (L): 27.5 mm Runout accuracy: 15 µm Packaging unit: 1 Special features DIN 6499 with internal square for thread cutting Suitable for ER collet chucks and thread‑cutting chucks Compact design for limited‑space toolholders Label: Spannzange ER16-GB Spann-D.8mm 4-KT.6,2mm TECWERK FAQ What machines is this collet compatible with? This ER‑GB collet is compatible with standard ER collet chucks and thread‑cutting collet holders designed for DIN 6499 interfaces; check the chuck specification for ER 16 compatibility. Can the collet be used for thread cutting? Yes, the internal square drive and the GB configuration are intended to support thread‑cutting operations, providing secure torque transfer during tapping. How precise is the concentricity of the collet? The collet specification indicates a runout of 15 µm, which supports consistent concentricity for general precision toolholding. What are the exact dimensions of the collet? Key dimensions: clamping diameter 8 mm, square drive 6.2 mm, and overall length 27.5 mm. What is the product designation or SKU for ordering? The article is listed as ER 16-GB with SKU 2000834953NW for ordering and stock reference. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
8mm ER25 Collet 34mm Length Nominal Minus 1.0mm Clamping Range, DIN 6499-B - TECWERK
Reliable, precise clamping for repeatable machining: the ER 25 collet combines DIN 6499‑B compatibility, full‑length tool holding and a tight runout of 5 µm, delivering consistent surface quality and reduced rework; order the collet directly via Metav Werkzeuge or ask our consultants if needed Collet type ER 25/430 E — ER 25 collet, 8 mm clamping diameter (TECWERK) Collet type ER 25/430 E provides secure clamping for ER 25 collet chucks in general machining applications, optimised for consistent concentricity and fast changeovers DIN 6499-B compatible design Full-length holding of tools Runout and repeat accuracy 5 µm Clamping diameter 8 mm, length 34 mm Consistent concentricity for better surface quality The ER collet is engineered to maintain tight concentricity, with a specified runout and repeat accuracy of 5 µm. This level of precision reduces vibration, improves tool life and delivers a more consistent surface finish on the machined part. Compatibility with DIN 6499‑B ensures interchangeability with standard ER 25 chucks, so set‑ups are repeatable and less prone to error. For production environments where repeatability matters, the measurable improvement in process stability is an immediate operational benefit. Fast set-up and secure gripping to reduce cycle time Designed for straightforward integration, the clamping sleeve permits full‑length holding of tools, which spreads clamping forces along the tool shank and improves stability under load. The collet’s clamping diameter 8 mm, with overall L: 34 mm and D: 26 mm, keeps installation and removal simple and predictable. The feature described as span bridging (nominal minus 1.0 mm) allows the collet to compensate for slight size variations without intermediate spacers, reducing set‑up steps and lowering the risk of incorrect seating during tool changes. Practical use and machining contexts This ER 25 item is intended for use in standard ER collet chucks for general machining tasks where reliable gripping and concentricity are required. The geometry allows the tools to be held on the guiding chamfer as well as along the full clamping length, which is useful for short tool overhangs and limited clamping surfaces. The simple, standards‑based design supports quick tool swaps in milling, drilling and reaming operations, improving throughput without introducing complex handling procedures. Why supply through Metav supports production reliability Sourcing this TECWERK ER 25 collet via Metav adds a layer of procurement confidence: a European stock point in Emmerich acts as a quality filter and ensures reliable fulfilment. Metav’s experience as a precision partner, a broad catalogue covering workshop needs and an established customer base underline dependable supply and technical competence. For buyers seeking predictable delivery and traceable product specifications, this route reduces supplier complexity and supports consistent workshop performance. For expert recommendations and reliable supply of TECWERK ER 25 collets, contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich Technical data Article number: 2000832929NW Type: ER 25 Product: ER 25 collet Packaging unit: 1 Facts Clamping diameter (d): 8 mm Length (L): 34 mm Outer diameter (D): 26 mm Runout / repeat accuracy: 5 µm Span bridging: nominal minus 1.0 mm Special features Compatible with DIN 6499‑B Fits ER collet chucks No intermediate sizes required Tools held along entire clamping length Can be clamped on the guiding chamfer Runout and repeat accuracy: 5 µm FAQ What chuck type is this collet compatible with? This collet is compatible with ER 25 collet chucks and follows DIN 6499‑B compatibility for standardised interchangeability. What does the 5 µm runout specification mean in practice? A runout of 5 µm indicates the maximum deviation from true rotation; the TECWERK ER 25 collet maintains this tolerance to support consistent tool life and surface finish. Can the collet clamp tools on the chamfer as well as the shank? Yes, the design permits clamping on the guiding chamfer and along the full clamping length, which is useful for short tool overhangs. What is the span‑bridging capability of this collet? The collet bridges tool size variations up to nominal minus 1.0 mm, allowing secure clamping without the need for intermediate shims. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
8mm ER25 Collet With 6.2mm Internal Square For Thread Cutting, 15 µm Runout - TECWERK
Taking advantage of the combination of 15 µm runout accuracy and an internal 6.2 mm square for secure tapping operations ensures reliable thread cutting and consistent tool holding; order the ER 25-GB collet directly via Metav Werkzeuge or consult our team for application advice. ER 25-GB collet — 8 mm clamping diameter, internal 6.2 mm square (TECWERK) ER 25-GB collet designed for ER-style chucks; DIN 6499-compliant and optimised for 8 mm tools with a 6.2 mm internal square for tapping DIN 6499-compliant design Internal 6.2 mm square for tapping 8 mm clamping diameter Runout accuracy 15 µm Precision that keeps production predictable The ER 25-GB collet delivers runout accuracy of 15 µm, a figure that directly reduces vibration and tool wear in high-precision operations. Measured concentricity is crucial when producing threaded components or working at higher spindle speeds; the tight specification helps to preserve cutting edges and maintain dimensional tolerances. The collet’s conformity with DIN 6499 guarantees standardised interfaces with ER chucks, simplifying tool change procedures and ensuring repeatable clamping performance. Secure torque transmission for tapping and thread cutting An integrated 6.2 mm internal square provides a positive drive for taps and other thread-cutting tools, preventing slippage under torque and lowering the risk of tap breakage. This functional detail turns the collet into a reliable interface between spindle and tool, improving process stability during threading operations. By using a GB-style internal square, the collet facilitates controlled torque transfer while keeping setup straightforward and maintenance predictable. Compact dimensions for easy integration and replacement With a length of 34 mm and an outer diameter indicated as 8 mm, the collet fits standard ER25 systems and requires minimal adapter work for integration. The compact form supports close-packed tool arrangements and quick swaps from the chuck, reducing downtime. Durable geometry and standardised sizing make the component a convenient spare-part option for workshop inventories and machining centres that demand consistent clamping quality. Contact Metav Werkzeuge to discuss TECWERK ER 25-GB collets and secure 15 µm runout performance for reliable tapping applications Technical data Article number: 2000834964NW Type: ER 25-GB Manufacturer: TECWERK Product type: Collet GB Core specifications Clamping diameter: 8 mm Internal square: 6.2 mm Length L: 34 mm Outer diameter d: 8 mm Runout accuracy: 15 µm Special features DIN 6499 compliant Internal square for thread cutting Suitable for ER tapping and collet chucks Packaging unit: 1 FAQ Is the ER 25-GB collet suitable for tapping operations? Yes. The ER 25-GB collet by TECWERK features an internal 6.2 mm square specifically intended for tapping and thread cutting to reduce slippage and improve torque transmission (SKU 2000834964NW). What runout can be expected from this collet? The ER 25-GB is specified with a runout accuracy of 15 µm, a level that supports precise machining and helps to extend tool life in repetitive operations. Which chuck systems is this collet compatible with? This GB collet is designed for standard ER-style chucks and conforms to DIN 6499, ensuring compatibility with ER collet chucks and tapping chucks that accept ER25 components. What tool sizes does the collet hold and what are its dimensions? The collet clamps 8 mm tools and includes a 6.2 mm internal square for taps; overall length is 34 mm with an outer diameter noted as 8 mm. Does the ER 25-GB meet industry standards for interchangeability? Yes. The ER 25-GB collet meets DIN 6499 requirements, which promotes interchangeability and predictable performance across compliant ER systems. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm ER32 Collet With 6.2mm Internal Square For Threading, 15µm Runout, 40mm Length - TECWERK
Take advantage of the DIN 6499 compliance and the internal square for thread cutting together with a verified runout accuracy of 15 µm to ensure reproducible clamping and minimal rework. The compact dimensions — 8 mm clamping diameter with a 6.2 mm internal square and L 40 mm — make this collet a practical choice for integration in standard ER tooling systems; order via Metav Werkzeuge or consult the specialists for application advice. ER 32-GB Collet – 8 mm clamping diameter, 6.2 mm internal square (TECWERK) The ER 32-GB collet is a DIN‑compliant clamping sleeve designed for precise thread cutting and secure holding in ER-type collet chucks. DIN 6499 with internal square for threading Suitable for ER collet chucks and thread-cutting chucks Runout accuracy 15 µm ensures repeatability Compact dimensions: 8 mm clamping diameter Consistent clamping for accurate threading and minimal scrap The collet is engineered to meet DIN 6499 standards with an internal square for thread‑cutting tools, which reduces tool slippage and positional error during operations. With a specified runout accuracy of 15 µm, the design supports high repeatability and helps maintain thread quality across batches. For production environments where consistent geometry and reduced rework are priorities, the ensured concentricity translates directly into lower scrap rates and steadier cycle times. Seamless compatibility with ER systems and straightforward integration Designed as a type ER‑GB component, the sleeve mates with standard ER chucks and thread‑cutting holders, making retrofits and tool changes straightforward. The 8 mm clamping diameter and 6.2 mm internal square correspond to common thread‑cutting shank sizes, while the overall length (L 40 mm) keeps the tool‑holder assembly compact. This compatibility reduces setup complexity and supports lean tooling strategies in workshops and small production lines. Practical workshop benefits and handling advantages The compact form factor and defined dimensions support efficient tool storage and quick identification on the bench. The combination of a precise internal square and verified runout offers mechanical security during high‑torque operations, helping to protect both expensive cutting tools and workpiece surfaces. For maintenance planning, the uncomplicated geometry allows routine inspection with a dial indicator or a precision measuring device to confirm ongoing concentricity and service intervals. Typical applications and target equipment The collet suits thread‑cutting tasks and general clamping duties within metalworking and fabrication shops that employ ER collet systems. Typical users include contract workshops, toolrooms and small series production lines requiring reproducible results with standardised clamping hardware. The component’s specification supports use with thread‑cutting heads and collet chucks where precision and interchangeability are essential. Contact Metav Werkzeuge for availability, specification matching and expert advice — Metav Werkzeuge GmbH in Emmerich can confirm stock and compatibility; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000834972NW Type: ER 32-GB Label: Spannzange ER32-GB Spann-D.8mm 4-KT.6,2mm TECWERK Product type: Spannzange GB Manufacturer: TECWERK Packaging unit: 1 Numbers / core technical data Clamping diameter: 8 mm Internal square: 6.2 mm Length (L): 40 mm Shank diameter (d): 8 mm Runout accuracy: 15 µm Designs / special features DIN 6499 compliant Internal square for thread cutting Suitable for thread-cutting and ER collet chucks Type ER‑GB specification FAQ What material is the collet made from? The available data does not specify a material for the ER 32-GB collet; material information should be requested from Metav Werkzeuge or the manufacturer for application‑specific guidance. Can the collet be used for other machining tasks besides thread cutting? Yes. The ER 32-GB collet, designed for thread cutting with an internal square, is also suitable for general clamping in ER chucks where its dimensions match the tool shank. How precise is the concentricity of the ER 32-GB collet? The collet offers a runout accuracy of 15 µm, which supports repeatable positioning for many precision‑oriented workshop operations. Is the collet compatible with standard ER 32 chucks? The ER 32-GB is specified as compatible with ER‑type collet chucks and thread‑cutting holders; confirmation with the specific chuck model is recommended. What are the exact dimensions to check before selection? Key dimensions include the 8 mm clamping diameter, 6.2 mm internal square and L 40 mm overall length; verify these against the tool shank and holder specifications. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm ER40 Collet With 46mm Length, 5 µm Runout, Fits ER Collet Chucks - TECWERK
Take advantage of the combination of precise 5 µm runout, full-length clamping and a compact 46 mm design for reliable tool holding and consistent production results; order the collet via Metav Werkzeuge or consult our technical team for application support. ER collet type ER 40/472 E – clamping 8 mm (TECWERK) The ER collet type ER 40/472 E is a precision clamping accessory for ER 40 collet chucks, designed to hold tools securely along the full clamping length and to be used where high runout and repeatability standards are required. DIN 6499-B compatibility with ER chucks Full-length clamping for stable tool support Runout and repeatability 5 µm Compact length 46 mm for tight setups Consistent spindle accuracy for repeatable machining The ER collet is engineered to deliver consistent spindle accuracy, with a declared runout and repeatability of 5 µm, which reduces tool vibration and improves surface finish. Conformity to DIN 6499-B ensures interchangeability with standard ER 40 systems and simplifies toolholder selection. The specification for clamping diameter bridging (nominal minus 1.0 mm) allows the collet to accommodate slight differences between nominal shank sizes and actual tool diameters, so the clamping interface compensates for small tolerances without the need for intermediary sleeves. This leads to fewer changeover interruptions and a measurable improvement in process stability. Stable gripping and compact footprint for workshop efficiency With full-length clamping and the ability to be clamped on the lead chamfer, the design keeps the tool securely supported over its entire gripped length, which extends tool life and lowers scrap rates. The compact dimensions (46 mm length, bore 8 mm, outer diameter 41 mm) make it suitable for congested spindle environments and multi-spindle machines where space is at a premium. Compatibility with ER 40 collet chucks means straightforward integration into existing setups; no intermediate sizing measures are required, enabling faster tool changes and reduced downtime, which improves overall equipment effectiveness. Practical supply and partner support for seamless procurement Sourcing the collet through Metav provides more than a component: it offers access to a supplier committed to democratising precision. Metav’s logistics and quality filtering from Emmerich support reliable stock levels and straightforward ordering for production planners and maintenance teams. The Metav approach combines technical competence with a broad product range, making it easier to consolidate supply chains and maintain consistent workshop availability without compromising on quality or traceability. Contact Metav Werkzeuge for application advice and procurement of TECWERK ER collets; our team in Emmerich is ready to assist by phone or e‑mail to ensure the right fit for the machine and the operation Technical data Article number: 2000832966NW Type: ER 40 Product: ER collet Brand: TECWERK Packaging unit: 1 Facts Clamping diameter: 8 mm Runout / repeatability: 5 µm Length L: 46 mm Bore d: 8 mm Outer diameter D: 41 mm Clamping diameter bridging: nominal − 1.0 mm Special features DIN 6499-B standard conformity Suitable for ER 40 collet chucks Full-length clamping Can be clamped on lead chamfer No intermediate sizes required FAQ What clamping diameter does the collet accommodate? The ER collet clamps a nominal shank of 8 mm, with a clamping diameter bridging allowance of nominal minus 1.0 mm to compensate for slight size variations. What runout can be expected when using this collet? The collet delivers a runout and repeatability of 5 µm, giving stable concentricity for precise machining with the TECWERK ER 40/472 E collet. Is this collet compatible with standard ER 40 chucks? Yes, the collet is made to DIN 6499-B and is compatible with ER 40 collet chucks, enabling direct use without additional adapters. Can tools be clamped on the lead chamfer with this collet? The design permits clamping on the lead chamfer as well as along the full clamping length, providing versatile and secure holding options. What are the physical dimensions of the collet? Key dimensions: length 46 mm, bore 8 mm, outer diameter 41 mm; article number 2000832966NW identifies the exact item. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm Magnet Rod Gripper Smooth, 4N Holding Force, AlNiCo 500 - TECWERK
Compact magnetic handling and high-temperature resilience combine in this compact unit: reliable 4 N holding force, AlNiCo 500 construction and a smooth finish enable secure part handling in demanding production settings; order directly via Metav Werkzeuge or consult our specialists for integration advice. Magnet rod gripper D8×H12 mm — smooth finish, 4 N holding force (TECWERK) A Magnet rod gripper D8×H12 mm designed for precise part pick-up and positioning in assembly, inspection and light automation tasks. AlNiCo 500 magnetic alloy construction High holding force: 4 N Compact D8×H12 mm smooth design Operates up to 450 °C with h6 tolerance Secure grip for delicate handling and repeatable pick-up The compact magnetic gripper delivers a 4 N holding force while preserving component surfaces thanks to its smooth finish. Constructed from AlNiCo 500, the alloy combines stable magnetic properties with resistance to demagnetisation at elevated temperatures, which translates into predictable performance across production cycles. The moderate holding capacity is ideal for small fixtures, rotating inspection stations and sensitive parts where over‑clamping would risk deformation. By converting raw magnetic parameters into practical outcomes, the unit supports consistent pick-and-place tasks with minimal setup time and reduced part damage. Built for heat and tolerance-critical processes Designed to tolerate temperatures up to 450 °C, the gripper is suitable for heat-treatment, brazing or processes near ovens where standard magnets would lose effectiveness. The supplied specification includes a h6 tolerance and a secondary dimension 3 mm for the interface, ensuring reproducible fits into housings or dedicated mounting sleeves. Explaining the terms: h6 denotes a tight shaft-to-bore fit class that helps preserve concentricity, and the declared operating temperature indicates retained magnetic performance rather than mere thermal resistance. These attributes make the device a reliable choice when thermal cycles and dimensional precision are combined requirements. Space-saving design for straightforward integration With outside dimensions D8×H12 mm and a smooth execution, the component is optimised for compact assemblies and retrofit into existing grippers or end‑of‑arm toolings. The minimal footprint reduces interference in dense layouts and simplifies collision avoidance in automated cells. The polished surface minimises friction and particulation, aiding maintenance in cleaner environments, while the magnetic alloy construction reduces the need for mechanical clamps on small parts. As a small, ready-to-install magnetic element, it supports faster machine cycles and lower tooling complexity without compromising positional repeatability. Contact Metav Werkzeuge for tailored supply and technical advice on TECWERK magnetic rod grippers; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000832251NW Product: Magnet rod gripper Brand: TECWERK Material: AlNiCo 500 Finish: smooth Core data Diameter: 8 mm Height: 12 mm Holding force (max): 4 N Operating temperature: up to 450 °C Tolerance class: h6 Dimension h: 3 mm Packaging unit: 1 Special features Compact D8×H12 mm design Smooth execution for minimal marking Suitable for high-temperature applications up to 450 °C Repeatable magnetic performance due to AlNiCo 500 FAQ What is the maximum holding capacity of this magnetic element? The maximum holding capacity is 4 N for the Magnet rod gripper D8×H12 mm, suitable for light part handling and positioning tasks. Can the gripper be used in high-temperature environments? Yes, the TECWERK magnetic rod gripper maintains performance up to 450 °C, making it appropriate for processes with elevated temperatures. What does the h6 tolerance mean for installation? A h6 tolerance indicates a close fit for the interface dimension; the gripper’s specified 3 mm dimension h and h6 class enable precise, reproducible mounting in housings or sleeves. Is the surface finish suitable for fragile components? The smooth execution reduces surface abrasion and particulation, so the device is well suited for handling delicate parts where marking must be minimised. Which alloy is used and why is it relevant? The gripper is made from AlNiCo 500, an alloy known for stable magnetic properties at higher temperatures and resistance to demagnetisation, which supports consistent handling performance. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm Quick-Change Insert SE 6.2mm Square Shank for DIN 371 M8, L3 4mm L4 21.5mm - TECWERK
Combine rapid tool changes with reliable torque transfer in a compact Size 1 insert. The combination of DIN compatibility and precise square-shank drive reduces setup time and wear—order the quick-change insert directly via Metav Werkzeuge or consult our specialists for tailored delivery. Quick-change insert SE 8 mm x 6.2 mm, Size 1 – TECWERK A Quick-change insert SE designed for secure holding of taps and fast swaps in production and workshop environments, compatible with DIN 371 M8 tap applications. Quick-change system for rapid tool swaps Torque via 6.2 mm square shank drive Compatible with DIN 371 M8 tapping tools Compact Size 1 for tight toolholders Faster changeovers that keep production moving The quick-change insert concept focuses on efficiency: taps are held by a quick-clamping device, allowing swift replacements without time-consuming re-clamping. Because the insert is specified for DIN 371 M8, it fits established tap geometries and reduces the need for special tooling. For workshops where every minute of spindle time matters, the reduced setup and tool-change time translates directly into improved throughput. The compact design also minimises the space required in toolholders, helping maintain line density without compromising accessibility. Secure torque transmission for precise threads Torque is transmitted via the square shank (6.2 mm), which provides a positive drive and lowers the risk of slippage during tapping cycles. The insert is supplied without a safety coupling, so torque transfer is direct and immediate—suitable for controlled production environments where a positive drive is required. The direct transfer method supports consistent thread quality and repeatability, while the standardised drive geometry simplifies integration into existing holders and spindles. Dimensions and mechanical compatibility explained Key dimensions are provided to ensure correct selection and fit: D: 30 mm, D1: 19 mm, L1: 18.5 mm, L3: 4 mm, L4: 21.5 mm, L5: 7 mm. These measurements define the insert’s envelope and engagement depth, making it straightforward to verify clearance and reach for specific tapping operations. Where different shank sizes are used, matching inserts are required to maintain the intended torque path and clamping interface; this modular approach keeps inventories lean while offering flexibility across a range of threaded operations. Practical considerations for purchase and deployment The insert is delivered as a single unit (packaging unit: 1), allowing precise inventory control for production planners. Because the component is intended for use with taps held in a quick-clamping device, ensure the holder and the tap meet DIN 371 specifications for optimum performance. For workshops seeking reliable sourcing and consistent quality, Metav’s distribution from Emmerich ensures dependable supply and a broad range of compatible toolholders and replacement inserts. Contact Metav Werkzeuge for assistance with selection, compatibility checks and delivery coordination—rely on our expertise to integrate TECWERK quick-change inserts into your workflow efficiently Technical data SKU: 4000832638NW Product type: Quick-change insert SE Size designation: Size 1 Suitable for: DIN 371 M8 Facts Diameter: 8 mm Square shank: 6.2 mm D: 30 mm D1: 19 mm L1: 18.5 mm L3: 4 mm L4: 21.5 mm L5: 7 mm Packaging unit: 1 Special features Without safety coupling Inserts in which taps are held by the quick-clamping device Torque transmission via the shaft square Different inserts required for different shank sizes FAQ Is this insert compatible with all M8 taps? Compatibility depends on the tap complying with DIN 371 M8 dimensions; the insert is designed to work with taps that meet that standard and with holders using the specified quick-clamping interface. How does the 6.2 mm square shank affect performance? The 6.2 mm square shank provides direct torque transmission and reduces slippage compared with cylindrical drives, supporting consistent thread quality during repetitive tapping cycles. Can the insert be used with a safety coupling? This version is supplied without a safety coupling; where torque-limiting protection is required, pairing with a compatible coupling or selecting an alternative insert designed for torque release is recommended. What should be checked before fitting the insert? Verify the holder’s quick-clamping mechanism, the tap’s DIN 371 conformity and the required engagement lengths (see L1, L4, L5) to ensure correct fit and reach. Is the insert suitable for automated tapping machines? Yes—when the machine’s holder and the tap conform to the same standards. The direct square-shank drive is appropriate for controlled automated cycles where a positive torque transfer is desired. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm Quick-Change Insert SE 6.2mm Square Shank For DIN 371 M8, L3 5mm - TECWERK
Benefit from precise torque transmission via the shank square and compatibility with DIN 371 M8 taps for consistent thread forming; the compact dimensions and quick-clamping design reduce set-up time and save space in crowded toolholders. Order this insert directly via Metav Werkzeuge or consult our technical advisers for guidance. SE 8mm x 6.2mm Quick-change Insert (Size 2) – for DIN 371 M8, TECWERK The SE 8mm x 6.2mm Quick-change Insert (Size 2) is a dedicated replacement insert for quick-change tap holders, optimised for secure tapping operations with taps conforming to DIN 371 M8. Shank-square torque transmission Designed for DIN 371 M8 taps Quick-clamping insert — no safety clutch Compact dimensions for tight toolholders Consistent torque transfer for reliable thread forming The insert is engineered so that torque is transmitted directly through the shank square, providing a mechanically secure connection between holder and tap. This arrangement reduces backlash and improves repeatability during tapping cycles; the absence of a safety clutch means torque is applied without slip, which is beneficial where precise torque application is required. For users working with the DIN 371 M8 standard, this results in predictable performance and fewer rejected threads, particularly in production environments where consistency matters. Compact design that simplifies toolholder integration With a compact footprint, the insert fits into tight assemblies and keeps overall holder length to a minimum. Key dimensions (L1: 32 mm, L3: 5 mm, L4: 35 mm, L5: 11 mm, D: 48 mm, D1: 31 mm) support integration into standard quick-change systems without major adaptations. Because different shank sizes require matching inserts, the modular concept enables straightforward interchangeability across a workshop’s tool inventory, reducing downtime and streamlining tool management. The compact format also improves access in confined workspaces, making it easier to position the tap accurately. Practical workshop advantages and supplier support The design focuses on practical benefits: reduced set-up time from the quick-clamping device, reliable mechanical drive via the shank square, and clear compatibility with DIN 371 M8 taps. When additional information is needed on suitability for specific machines or tapping cycles, Metav Werkzeuge provides technical assistance and product guidance, supporting selection and ensuring the insert meets application requirements. For operations seeking dependable, easy-to-fit components, this insert offers a pragmatic balance of precision and simplicity. Choose the TECWERK SE quick-change insert for dependable tap retention and streamlined set-up — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832642NW Product type: Quick-change insert SE Product label: SE 8mm x 6.2mm Quick-change Insert (Size 2) for DIN 371 M8 Brand: TECWERK Packaging unit: 1 Facts Diameter: 8 mm Shank square: 6.2 mm L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm D1: 31 mm Suitable for: DIN 371 M8 Special features Without safety clutch Inserts hold taps via quick-clamping device Torque transmission via shank square Different shank sizes require corresponding inserts FAQ What taps are compatible with this quick-change insert? The SE 8mm x 6.2mm Quick-change Insert (Size 2) is intended for use with taps conforming to DIN 371 M8; compatibility is achieved through the specified shank square and quick-clamping interface. How does the absence of a safety clutch affect operation? Because the insert transfers torque directly via the shank square and has no safety clutch, the drive connection is positive and slip-free, offering consistent torque delivery during tapping cycles. Can this insert be used in tight toolholder assemblies? Yes, the compact dimensions (for example L1: 32 mm and D: 48 mm) make the insert suitable for installations where space is limited and precise positioning is required. Are different sizes available for other shank standards? The insert design requires matching inserts for differing shank sizes; for alternative shank dimensions, select the corresponding quick-change insert version to ensure correct torque transmission. Which measuring values should be checked when replacing an insert? Verify the shank square dimension (6.2 mm), the overall insertion length (L1: 32 mm) and the relevant diameters (D: 48 mm, D1: 31 mm) to ensure proper fit in the quick-change holder. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm Quick-Change Insert SES 6.2mm Square Shank for DIN 371 M8, Adjustable Torque-Limit Coupling - TECWERK
Benefit from an adjustable safety clutch and secure shank-square torque transmission to avoid tap breakage and reduce downtime; a compact quick-change solution that fits DIN 371 M8 tapping applications. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. Quick-change insert SES 8 mm x 6.2 mm (Size 1) – torque-limited for DIN 371 M8 The Quick-change insert SES 8 mm x 6.2 mm (Size 1) is a compact, torque-limited drive insert designed for protected tapping of DIN 371 M8 threads in workshop and industrial settings. Adjustable safety clutch reduces tap breakage Torque via shank square for secure drive Compatible with DIN 371 M8 taps Compact size 8 mm diameter, 6.2 mm square Reliable tapping through controlled torque transmission The core benefit of this insert is its adjustable safety clutch, which limits torque to prevent costly tap breakage and interruption of production. By interrupting torque transfer at a set threshold, the clutch safeguards both the tap and the workpiece; this reduces the risk of scrapped parts and extends tool life. The mechanism operates independently of the machine, providing a predictable safety margin when using hand-held or machine-driven tapping tools. Secure connection and compatibility for consistent results Torque transfer is achieved via the shank square, ensuring a positive mechanical drive that minimises slippage under load. The insert is specified for DIN 371 M8 taps and is supplied in Size 1 with an 8 mm diameter and a 6.2 mm shank square, so it suits standardised tapping operations. The design requires matching inserts for alternative shank dimensions, which allows workshops to standardise on the appropriate insert per shank size without compromising on drive reliability or repeatability. Compact design with clear dimensional guidance for easy selection The quick-change format simplifies tool changes and reduces machine downtime, while the compact geometry supports confined working spaces. Key dimensions are provided for accurate selection and setup: L3: 24.5 mm, L4: 21.5 mm, L5: 25.5 mm, D: 32 mm, L1: 18.5 mm, D1: 19 mm. These values help determine clearance and insertion depth, enabling planners and operators to verify fitment quickly. The combination of small footprint and torque control makes the insert well suited to repetitive tapping tasks in small-batch and serial production alike. For dependable tapping performance choose the TECWERK torque-limited SES insert and contact Metav Werkzeuge for tailored advice and fast supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000832669NW Article number: 4000832669NW Type: Size 1 Product: Quick-change insert SES Facts Diameter: 8 mm Shank square: 6.2 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm L1: 18.5 mm D1: 19 mm Packaging unit: 1 Special features Adjustable safety clutch for torque limiting Prevents tap breakage Torque transmission via shank square For different shank dimensions, corresponding inserts required Suitable for DIN 371 M8 tapping FAQ What is the primary function of the adjustable safety clutch? The adjustable safety clutch in the quick-change insert limits torque to protect taps and workpieces; it disconnects torque transmission when the preset threshold is exceeded. Is this insert suitable for standard M8 taps? Yes, the Quick-change insert SES 8 mm x 6.2 mm (Size 1) is specified for use with DIN 371 M8 taps and provides a secure drive for that thread form. How does the insert transfer torque to the tap? Torque is transferred via the shank square, which provides a positive mechanical connection and reduces the risk of slippage under load. Are different shank sizes supported by the system? The system requires corresponding inserts for differing shank dimensions; select the insert that matches the shank square required for each tapping application. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm Quick-Change Insert SES 6.2mm Square Shank for DIN 371 M8, Adjustable Torque-Limiting Safety Coupling - TECWERK
Take advantage of the combination of reliable torque control, DIN 371 M8 compatibility and straightforward integration to reduce tap breakage and downtime. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. Quick-change insert SES 8 mm × 6.2 mm, Size 2 – Adjustable safety clutch (TECWERK) The Quick-change insert SES 8 mm × 6.2 mm Size 2 is a compact tapping tool adapter designed for secure torque limitation and safe use with DIN 371 M8 taps in workshop and production environments Adjustable safety clutch for torque limitation Prevents tap breakage during tapping operations 6.2 mm square drive for solid torque transmission Compatible with DIN 371 M8 taps Safer tapping through controlled torque The core advantage of the SES quick-change insert is its adjustable safety clutch, which limits applied torque to protect taps from sudden overload. By decoupling excessive torque at the clutch setting, the risk of tap breakage is significantly reduced, especially when working in interrupted cuts or with hard materials. This torque control also lowers rework rates and preserves tooling life, resulting in a measurable increase in process reliability and lower overall downtime. Robust drive engagement for accurate torque transfer A secure drive connection ensures predictable performance: torque is transmitted via the 6.2 mm square drive on the shaft, providing a positive mechanical interface between the adapter and the tap holder. This method of torque transfer minimises slip and wear compared with friction-based couplings and supports consistent thread quality. Compatibility with DIN 371 M8 taps means the insert integrates with widely used tapping standards, simplifying tool selection and stock management in mixed-tool workshops. Compact dimensions for flexible integration The insert’s form factor supports straightforward mounting and keeps the tool train compact. Key mounting dimensions such as L1: 32 mm, L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm and D1: 31 mm define clearance and fit in common holders and quick-change systems. These measured values allow engineers to verify seating depth and overall assembly length in CAD or on the shop floor, ensuring the adapter suits existing setups. Where different shank diameters are in use, matching inserts are required to maintain the intended drive fit and torque characteristics. For tailored advice on TECWERK quick-change inserts and to confirm fitment with existing tapping equipment, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 4000832677NW Product: Quick-change insert SES Size: Size 2 Label: Schnellwechseleinsatz SES 8mmx6,2mm Gr.2 f.DIN 371 M8 Manufacturer: TECWERK Facts Diameter: 8 mm Square drive: 6.2 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm D1: 31 mm Packaging unit: 1 Special features Adjustable safety clutch for torque limitation Prevents tap breakage Torque transmitted via shaft square Compatible with DIN 371 M8 taps Different shank sizes require specific inserts FAQ Is this insert suitable for DIN 371 M8 taps? The Quick-change insert SES 8 mm × 6.2 mm Size 2 is specified for use with DIN 371 M8 taps and provides a standard-compliant connection for those thread-cutting tools. How does the adjustable safety clutch protect taps? The adjustable safety clutch in the SES insert limits the transmitted torque to a preset threshold; when overload occurs, the clutch slips to prevent torque peaks from reaching the tap and causing breakage. Can the same insert be used with different shank sizes? No, the SES insert transmits torque via the shaft square and requires matching inserts for other shank dimensions; different shank sizes necessitate the corresponding quick-change insert. What mounting dimensions should be checked before installation? Verify the key dimensions L1 (32 mm), L3 (30.5 mm), L4 (35 mm), L5 (34 mm), D (50 mm) and D1 (31 mm) to ensure correct seating and clearance in the tool holder. Manufacturer / Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
8mm Reduction Bush Form 1 56mm Clamping Length, Hardened and Ground - TECWERK
Take advantage of a hardened, ground finish together with tight dimensional control — Ø 8 mm bore, Ø 32 mm outer diameter and 56 mm clamping length — for reliable concentricity and reduced runout in drill-bar applications; order the component directly via Metav Werkzeuge or consult our specialists for system integration. TECWERK reducing bushing, Form 1 — 8 mm bore, 32 mm outer Ø A TECWERK reducing bushing Form 1 designed to seat 8 mm shanks securely in 32 mm toolholders, optimised for drill-bar holders of Form E and engineered for repeatable mounting accuracy. Hardened and ground finish For drill-bar holders Form E Clamping length 56 mm Bore Ø 8 mm, outer Ø 32 mm Consistent concentricity for precision machining The combination of a hardened and ground surface with tight tolerances delivers a secure fit that preserves precision across repeated tool changes. With a bore of Ø 8 mm and an outer diameter of Ø 32 mm, the sleeve maintains axial alignment over its 56 mm clamping length, which reduces wobble at the spindle and lowers the risk of scrap. In practice, this means more dependable hole geometry and less time spent reworking parts when the component is used in a clamping system for drill bars. Lower vibration, longer tool life and better finishes By improving the interface between shank and holder, the reducer reduces vibration and minimises runout, which translates directly into extended tool life and improved surface finish. The mechanical stability provided by the sleeve helps cutters and drills operate closer to their optimal parameters, enabling higher effective feed rates or more consistent cycle times — a clear efficiency advantage for production environments where throughput matters most. Clear compatibility and straightforward installation The sleeve is specified for holders of Form E, ensuring reliable integration with compatible drill-bar systems. Installation is straightforward: the component slides into the toolholder and provides a direct, repeatable seating for the shank. The design supports conventional clamping workflows and is suitable for retrofit into existing fixtures that accept a 32 mm outer diameter insert, simplifying upgrade paths without the need for elaborate adapters. Robust construction reduces downtime and maintenance Manufactured to industrial clamping standards, the component is built to resist wear under frequent use. The hardened and ground treatment preserves concentricity over time, reducing maintenance intervals and the need for frequent regrinding or replacement. For workshops aiming to consolidate suppliers, the sleeve represents a small inventory item that delivers measurable uptime benefits when applied consistently across compatible holders. For reliable supply and technical advice about the TECWERK reducing bushing, contact Metav Werkzeuge to confirm fitment from our Emmerich stock — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000834212NW Brand: TECWERK Product type: reducing bushing Form: 1 Facts Bore diameter: Ø 8 mm Outer diameter: Ø 32 mm Clamping length: 56 mm Packaging unit: 1 Special features Hardened and ground finish For drill-bar holders Form E Designed for repeatable seating and reduced runout FAQ What shank diameter does the sleeve accept? The sleeve is made for an Ø 8 mm shank; the internal bore is specified to secure that diameter reliably for drilling applications. Is the reducing bushing hardened? Yes — the component is hardened and ground, providing wear resistance and stable concentricity under repeated use. Which holder types is it compatible with? The sleeve is intended for drill-bar holders of Form E and fits holders that accept an outer diameter of Ø 32 mm. What is the clamping length and why does it matter? The clamping length is 56 mm; this length increases the contact surface for the shank, enhancing stability and reducing the chance of movement under load. Can this sleeve improve tool life? When used correctly, the reducer reduces runout and vibration, which contributes to longer tool life and more consistent machining results with the TECWERK reducer (SKU 2000834212NW). Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
8mm Slot Bar For Precision Slitting Head, 210mm Length - Vertex
Take advantage of a compact solution that combines precision, straightforward integration and robust handling for more consistent slotting operations; the VSH-8C slotted bar (8 mm, 210 mm) supports stable setups while keeping changeover efficient. Order or request tailored advice via Metav Werkzeuge to ensure optimal fit for production workflows. VSH-8C Slotted Bar 8 mm — Accessory for precision slotting head, 210 mm The VSH-8C is a slotted bar designed as an accessory for precision slotting heads, intended to provide consistent alignment and a compact connection for 8 mm engagements in workshop and industrial slotting applications. 8 mm engagement for standard slotting interfaces 210 mm overall length for extended reach Robust handling weight of 0.8 kg Compatible with precision slotting head assemblies Secure positioning and measurable accuracy for slotting set-ups The slotted bar is engineered to offer repeatable alignment in slotting operations, translating into fewer setup iterations and improved process reliability. With an 8 mm engagement and an overall 210 mm length, the component permits precise placement while maintaining a compact footprint. For shops aiming to reduce rework and improve cycle-time consistency, this accessory provides a measurable improvement in fixture accuracy by stabilising the slotting head interface. Reduced set-up time and dependable handling in routine work By combining a deliberately balanced mass with a compact profile, the bar delivers stable handling during assembly and operation. The specified 0.8 kg mass helps to damp small vibrations and supports steady manual handling when mounting or removing the accessory. This contributes to fewer alignment checks between operations and a smoother workflow, especially in environments where frequent tool changes are required for varied slotting tasks. Straightforward integration with existing slotting heads and maintenance regimes The component is intended for direct use with precision slotting heads that accept an 8 mm slotted element; the design emphasises compatibility and uncomplicated integration into existing fixtures. The straightforward geometry makes inspection and routine maintenance simple, reducing downtime for cleaning or replacement. Where questions about fitment or technical details arise, clear specification of the VSH-8C and the host slotting head model enables rapid confirmation of compatibility. Contact Metav Werkzeuge today for compatibility guidance and a tailored supply recommendation for the Vertex VSH-8C slotted bar to support precise and reliable slotting set-ups Technical data SKU: VSH-8C GTIN: 4061905095245 ECLASS: 21040713 Core measurements Length: 210 mm Weight: 0.8 kg Designs & special features Accessory for precision slotting head Type: Slotted bar, 8 mm engagement Brand: Vertex FAQ What are the exact dimensions of the slotted bar? The VSH-8C has an overall length of 210 mm and an 8 mm engagement; the listed mass is 0.8 kg. Which slotting heads is the slotted bar compatible with? The slotted bar is designed for precision slotting heads that accept an 8 mm slotted element; compatibility depends on the host clamping geometry and should be verified against the host head's interface. Is the VSH-8C suitable for repetitive industrial use? The VSH-8C is a workshop-grade accessory by Vertex intended to provide stable positioning and handling in routine slotting operations. How is the slotted bar secured to the slotting head? The slotted bar provides a standard 8 mm engagement for mechanical clamping systems used by precision slotting heads; the exact securing method follows the host head's clamping procedure. Does the product include standard classifications or identifiers? Yes, the VSH-8C is listed with GTIN 4061905095245 and ECLASS 21040713 for identification and procurement processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
8x5x6" Angle Clamp High-Strength Cast Steel, 7.4kg - Vertex
Achieve reliable right‑angle set‑ups and secure workholding with the combination of high‑strength cast steel construction, a balanced mass of 7.4 kg and precise machined faces; these features translate into repeatable alignment and reduced rework. Order the VR-80 angle plate directly via Metav Werkzeuge or ask our consultants for application advice. VR-80 Angle Plate by Vertex — high‑strength cast steel, 7.4 kg The VR-80 angle plate is a compact clamping angle designed as a stable right‑angle reference for machining, inspection and assembly tasks in metalworking and toolmaking. High-strength cast steel construction Stable right-angle reference surface Compact footprint, 7.4 kg mass Consistent alignment for precision machining The VR-80 serves as a dependable right‑angle datum, delivering repeatable positioning for milling, drilling and inspection operations. Machined faces provide a true planar reference that reduces set‑up variation; this leads to fewer adjustments during batch runs and a lower scrap rate. The combination of a dense mass and robust casting minimises vibration and improves cutting stability, which is particularly beneficial when working with sensitive geometries or finishing passes. Where exact perpendicularity is required, the angle plate functions as a simple, low‑risk solution to maintain machining tolerances and throughput. Integrates smoothly into existing workholding setups With a compact footprint and straightforward mounting options, the device slips easily into existing fixture layouts and vice systems. The supplied dimensions (8x5x6") and a mass of 7.4 kg balance portability with form stability, enabling quick repositioning on the machine table while keeping the reference surface rigid under clamp loads. Flat, machined faces allow direct clamping or use with parallel bars and angle clamps, reducing set‑up time. For workshops aiming to streamline operations, this component supports faster job changeovers and consistent part orientation without the need for complex jigs. Built to last with low maintenance demands Constructed from high‑strength cast steel, the angle plate resists distortion and offers strong wear characteristics for extended service life. The material choice provides a corrosion‑resistant base suitable for general workshop environments; periodic cleaning and a light protective coating are sufficient to maintain the accuracy of the reference faces. This durability translates to long‑term cost efficiency: fewer replacements, reduced downtime and sustained precision across many production cycles. For quality‑focused facilities, the robustness of the design supports dependable measurement and machining practices. Contact Metav Werkzeuge for tailored advice, delivery options and to secure the VR-80 angle plate from our Emmerich warehouse, where product selection is curated for European industry standards. Technical Data Article number: VR-80 GTIN: 4061905093784 Manufacturer: Vertex Facts Material: high-strength cast steel Weight: 7.4 kg Dimensions: 8x5x6" ECLASS: 21020601 Special features Machined right-angle faces Compact workholding footprint Suitable for milling, drilling and inspection FAQ How is the VR-80 mounted on a machine table? The VR-80 angle plate is clamped using standard machine‑table clamps or mounted alongside vises and support blocks; its machined faces permit direct clamping or use with parallel bars. What materials is the angle plate suitable for use with? The VR-80 supports workholding for a wide range of materials in machining contexts; the high‑strength cast steel body ensures stability when processing metals and engineering plastics. How does the weight of 7.4 kg affect performance? A mass of 7.4 kg improves vibration damping and cut stability, helping maintain precision during milling and finishing operations without being so heavy as to hinder repositioning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
8x8x8" Angle Plate, High-Strength Cast Steel, 0.01mm Accuracy, 15.2kg - Vertex
Angle plate VR-88 — high-strength cast steel, ±0.01 mm accuracy (Vertex) An Angle plate VR-88 engineered for precision fixturing, inspection and machine setup in industrial workshops. *High-strength cast steel construction *Accuracy 0.01 mm for precise setups *Robust 15.2 kg mass for stability *Compact 8 x 8 x 8" footprint Measurable precision that reduces rework and inspection time The Angle plate VR-88 delivers a certified ±0.01 mm level of accuracy, which translates into consistent reference faces for inspection and setup tasks. Such precision reduces measurement scatter and the need for repeat checks, enabling faster quality decisions on the shop floor. For users unfamiliar with tolerance terminology: ±0.01 mm means the plate maintains its reference plane within one hundredth of a millimetre, supporting tight inspection limits and reliable component alignment. Mass and material that improve clamping stability A mass of 15.2 kg combined with high-strength cast steel construction gives the fixture inherent damping and resistance to movement under clamping forces. The increased inertia lowers vibration transfer during machining and provides a rigid datum when using surface plates or portable metrology equipment. The benefit is fewer positional shifts during set-up, which leads to better first-pass yields and reduced cycle interruptions for rework. Small footprint, flexible placement and consistent shop performance The compact 8 x 8 x 8" footprint suits confined benches and inspection benches while still offering full-face clamping capability. The robust design supports a range of workshop tasks from routine inspection to final assembly fixturing, creating a versatile reference tool for both production and quality departments. Metav Werkzeuge’s role as a European quality filter ensures the component arrives ready for industrial use, backed by dependable supply and technical guidance. Contact Metav Werkzeuge to discuss how the Vertex angle plate VR-88 can enhance fixture stability and measurement reliability; specification advice and rapid supply from Emmerich are available by e-mail or phone Technical Data Article number: VR-88 GTIN: 4061905091056 Eclass: 21170130 Facts Accuracy: 0.01 mm Weight: 15.2 kg Dimensions: 8 x 8 x 8" Materials / Special features Material: High-strength cast steel Suitable for inspection and fixturing Robust, vibration-damping design FAQ What level of accuracy does this plate provide? The Angle plate VR-88 provides an accuracy of 0.01 mm, offering a reliable datum for precise inspection and setup work. Is the VR-88 suitable for machining fixturing as well as inspection? Yes, the Vertex VR-88 is designed for both fixturing and inspection; its cast steel construction and mass make it suitable for stable clamping during light machining operations. How heavy is the plate and how does that affect use? At 15.2 kg the plate provides stability and vibration damping for more consistent measurement and clamping results without excessive handling for standard inspection benches. Can the plate be used on small benches and mobile inspection rigs? The compact 8 x 8 x 8" footprint allows placement on smaller benches and mobile rigs while still delivering full-face support for components during measurement tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
8–32mm Clamp Bar T‑Slot 10mm With M10x10x80 Clamp Screw, Range 8–32mm - AMF
Combine 10 mm T‑slot compatibility with an adjustable clamping height of 8–32 mm to achieve stable, repeatable fixturing and faster set‑up times; order the AMF clamping bar directly via Metav Werkzeuge or consult their specialists for application-specific advice. AMF Clamping Bar Nr. 6314V — 10 mm T‑slot, clamping height 8–32 mm The AMF Clamping Bar Nr. 6314V is a compact clamping bar for 10 mm T‑slot workholding, offering an adjustable clamping height from 8 to 32 mm and supplied with an M10 clamping screw for immediate integration into standard fixtures Designed for 10 mm T‑slot Adjustable clamping height 8–32 mm Includes M10 x 10 x 80 clamping screw Compact width 11 mm for tight setups Secure, repeatable clamping for faster production changeovers Engineered for compatibility with standard 10 mm T‑slot fixtures, this clamping bar provides a defined clamping range of 8–32 mm, enabling consistent pressure across a variety of workpiece heights. The supplied M10 x 10 x 80 clamping screw simplifies assembly and reduces the need for additional components, which shortens set‑up times and lowers the risk of incorrect screw selection. The result is improved process reliability and reduced machine downtime through predictable, repeatable fixturing. Space-efficient dimensions that suit confined workstations The compact form factor is designed for situations where space is at a premium: with a width of 11 mm and an overall length of 80 mm, the component fits into tight fixturing arrangements without obstructing adjacent tooling. These measurable dimensions enable precise planning of fixture layouts and contribute to more efficient use of table real estate. The relatively short overall length also supports close‑packed clamping patterns, which can improve throughput on batch machining operations. Simple integration and transparent specification for procurement Delivered as a single‑unit package that includes the clamping screw, the component is ready for immediate installation into T‑nut rails and modular clamping setups. Clear, numeric specifications—such as the clamping height band, thread size and physical dimensions—facilitate technical comparison and procurement decisions, ensuring the bar aligns with existing clamping hardware. Documentation of key values supports compatibility checks and helps maintain traceability in production planning. Contact Metav Werkzeuge today for a technical match of the AMF clamping bar Nr. 6314V to specific fixturing requirements or to request detailed dimensional drawings from the Metav Werkzeuge team Technical data SKU: 4000833071NW Type: Nr. 6314V Product: Clamping bar (Spanneisen) Brand: AMF Packing unit: 1 Dimensions & core data T‑slot width: 10 mm Clamping height: 8–32 mm Width: 11 mm Overall length: 80 mm Thread: M10 A: 15 B2: 30 E1: 15 E2: 30 LS: 39 Included components & features Includes clamping screw M10 x 10 x 80 Suitable for T‑nut 10 mm Product type: Spanneisen FAQ Which T‑slot size is the clamping bar suited for? The clamping bar is designed for a 10 mm T‑slot and mates directly with T‑nut systems specified for that slot width. What is the adjustable clamping height range? Clamping height is adjustable between 8–32 mm, providing flexibility for different workpiece thicknesses. Is a clamping screw supplied with the unit? Yes, the AMF clamping bar Nr. 6314V is supplied with a clamping screw M10 x 10 x 80 as part of the standard delivery. What are the key external dimensions to consider when planning fixtures? Key dimensions are width 11 mm and overall length 80 mm; additional specification values include A: 15, B2: 30, E1: 15, E2: 30 and LS: 39. Is this clamping bar suitable for modular production fixtures? The design and specification values of the AMF clamping bar Nr. 6314V (SKU 4000833071NW) make it suitable for modular T‑slot fixturing and repetitive production clamping tasks Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
9 W LED Inspection Light Waterproof Halogen Option, Light IP67 Arm IP20, 110V/220V, 1.8m Cable - Vertex
Take advantage of the 9 W LED energy efficiency and the IP67-protected light head for reliably bright, low-heat illumination in demanding workshop environments; the compact 220×220 mm arm and included 1.8 m cable make installation and immediate use straightforward — order directly via Metav Werkzeuge or ask our consultants for tailored advice. VLED-400M workshop inspection lamp by Vertex — 9 W LED, IP67 light head The VLED-400M is a waterproof inspection lamp designed for machine and workshop lighting, offering low-energy LED illumination and a compact square arm for targeted task lighting. 9 W LED for energy-efficient illumination Light head rated IP67 for wet environments Compact 220×220 mm square arm for precise positioning Includes 1.8 m cable for immediate installation Reliable illumination where accuracy matters The inspection lamp delivers steady LED light that supports close visual work without the high temperatures associated with older halogen solutions. With a rated output of 9 W, the lamp head provides efficient, continuous illumination that improves visibility on fine details and reduces operator fatigue during lengthy tasks. The low power draw also helps maintain a cooler work environment near sensitive components, contributing directly to process reliability and operator comfort. Durable protection for the lamp head, clear limits for the arm The light head is IP67-rated, meaning the illumination unit is protected against dust ingress and temporary immersion — a significant advantage when coolant splashes or wet-cleaning cycles occur. The supporting arm carries an IP20 rating, which highlights that while the lamp head is sealed against moisture, the arm is intended for use in standard workshop atmospheres rather than submerged or continuously wet conditions. This distinction allows confident placement of the fixture where protection is needed most, while clarifying suitable mounting scenarios. Voltage compatibility and practical on-site readiness Electrical compatibility with 110–220 V mains permits straightforward integration across varied supply networks, avoiding the need for custom transformers in many installations. The lamp is supplied with a 1.8 m cable, enabling immediate connection and flexible routing to nearby power sources. The relatively compact form and weight of 1.96 kg support secure mounting on machine guards, benches or stands without excessive strain on fixtures, making the unit a practical choice for retrofit and new-equipment setups alike. Designed for workshop use and straightforward procurement The fixture’s square 220×220 mm arm gives precise positioning for focused tasks such as inspection, assembly or maintenance checks. Classified under ETIM and ECLASS identifiers, the product supports structured procurement and integration into parts lists and inventories. The lamp is available in LED or halogen variants, allowing selection according to lighting preference and application needs. Supplied ready to install with cable, the unit reduces commissioning time and simplifies stocking for facilities managers. For reliable workshop lighting from a recognised brand, contact Metav Werkzeuge to discuss the Vertex VLED-400M and receive expert guidance and swift delivery from our Emmerich warehouse — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VLED-400M GTIN: 4061905088414 Manufacturer: Vertex Facts Power supply: 110V/220V Light output: 9 W (LED) Arm size: 220×220 mm (square) Weight: 1.96 kg Special features Light head IP67, arm IP20 Available in halogen or LED versions Included accessory: Cable 1.8 m Classified: eClass 27110640, ETIM EC001959 FAQ Is the light head fully waterproof and suitable for wet-cleaning? The light head is rated IP67, so temporary immersion and splash-prone cleaning are supported; the arm, however, is IP20 and should not be submerged. Can the lamp be used on both 110 V and 220 V supplies? Yes, the unit supports 110–220 V operation, making the lamp compatible with common mains voltages in most regions. What cable length is supplied and is the lamp ready to install? The lamp is supplied with a 1.8 m cable, enabling immediate connection and straightforward installation without additional cabling. Is there a halogen option as well as the LED version? The product range includes halogen or LED versions; the LED variant offers 9 W efficiency and lower operating temperatures compared with halogen. Which Vertex model should be specified for procurement lists? Specify the VLED-400M SKU and GTIN 4061905088414 to ensure correct ordering of the LED inspection lamp from Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
9 W LED Waterproof Inspection Lamp, 110V/220V, IP67, 1.8m Cable - Vertex
VLED-500S — Vertex waterproof LED work lamp, IP67, 9 W The VLED-500S is a robust, compact work lamp for industrial and workshop use, delivering splash‑proof illumination and flexible positioning for detailed assembly and inspection tasks. IP67 protection against dust and water 9 W LED for energy-efficient light 110V/220V dual-voltage compatibility Supplied with 1.8 m cable Consistent, bright light for precision work The VLED-500S provides reliable, shadow‑reducing illumination that supports accurate measurement and fine assembly. With a 9 W LED light source, the lamp produces steady, colour‑stable illumination while consuming minimal energy; this reduces heat generation and extends service intervals compared with filament options. The high ingress protection (IP67) ensures light output remains consistent even in dusty or wet production environments, contributing to fewer process interruptions and a measurable reduction in rejects during visual inspection tasks. The lamp’s compact form factor and low thermal footprint make it suitable for close‑up workbenches and machine‑tended inspection stations. Flexible mounting and targeted positioning for varied setups Designed with a single‑joint round arm, the lamp allows simple, repeatable repositioning for task‑specific illumination, from soldering and inspection to tool setting. The unit operates on 110V/220V supplies, enabling use across different regions and on mobile equipment without additional transformers. A 1.8 m cable is included, supporting easy integration into existing workstations and minimising the need for immediate rewiring. The combination of adjustable positioning and universal voltage support makes the lamp an adaptable asset for maintenance teams and production lines that require quick reconfiguration and minimal downtime. Durable construction that supports operational reliability Constructed for the workshop environment, this LED work lamp balances portability and robustness at 1.6 kg; it is simple to move yet substantial enough to remain steady during adjustment. The IP67 rating certifies protection against dust ingress and temporary immersion in water, offering tangible safety and compliance benefits in harsh or washdown conditions. Long service life of the LED module and the lamp’s sealed design reduce maintenance cycles and spare‑parts logistics, helping to lower total cost of ownership while maintaining safe, well‑lit work areas. Sourcing through an experienced distributor further improves supply reliability for production planners and procurement teams. Contact Metav Werkzeuge in Emmerich for expert advice on integrating the VLED-500S into existing workstations and for prompt, reliable dispatch from our European stock Technical Data Article number: VLED-500S GTIN: 4061905005725 Protection class: IP67 Light output: 9 W (LED) Voltage: 110V/220V Weight: 1.6 kg Included accessory: Cable 1.8 m Arm: Single‑joint (round) Facts Weight: 1.6 kg Power: 9 W (LED) Voltage range: 110V/220V Cable length: 1.8 m Special features Waterproof design Single‑joint round arm for targeted positioning Supplied cable 1.8 m Brand: Vertex FAQ Is the VLED-500S suitable for wet environments? Yes. The VLED-500S carries an IP67 rating, which provides protection against dust ingress and temporary immersion in water, making the lamp suitable for washdown and splash‑prone areas. What voltage supplies does the lamp accept? The VLED-500S supports 110V/220V operation, enabling flexible use across different installations and regions without an external converter. Does the lamp come ready to install? The lamp is supplied complete with a 1.8 m cable, allowing immediate connection to the mains and straightforward mounting via its adjustable arm. How does the LED compare to halogen in workshop use? The LED version offers longer service life, lower heat emission and reduced energy consumption compared with halogen alternatives; the VLED-500S’s sealed LED module also requires less maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
9 W LED Waterproof Work Lamp IP67 110V/220V With 1.8m Cable - Vertex
Robust IP67 protection combined with a low-energy 9 W LED and dual-voltage operation ensures dependable illumination in wet or dusty workshop environments; the integrated 1.8 m cable and compact arm simplify installation and reduce downtime. Order the VLED-500M through Metav Werkzeuge or consult the technical team for detailed specifications. VLED-500M LED Work Lamp by Vertex — IP67 waterproof, 9 W The VLED-500M is a compact, waterproof work lamp intended for industrial and workshop use, offering flexible supply voltages and a sturdy mounting arm for localised task lighting. IP67 waterproof protection 9 W LED energy efficiency Dual voltage 110V/220V compatibility Includes 1.8 m cable Durable illumination for harsh conditions The lamp’s IP67 rating guarantees resistance to dust and temporary immersion, making it suitable for wet production halls and outdoor workstations where resilience matters. Constructed for continuous operation in challenging settings, this lighting solution combines a sealed housing with a compact profile so that maintenance intervals are extended and unplanned downtime is reduced. The robust build supports reliable performance in environments that demand consistent, protected illumination. Low power consumption with wide voltage range Equipped with a 9 W LED module and compatible with 110V/220V mains, the unit delivers energy-efficient task lighting while remaining simple to integrate into different supply systems. The LED source minimises heat generation and offers longer service life compared with traditional lamps, which reduces replacement frequency and operating costs. This technical combination provides a practical balance of efficiency and performance for sustained workshop use. Simple installation and flexible mounting The lamp is supplied with a 1.8 m cable and fitted to a 220 x 220 mm rounded arm, enabling straightforward positioning above benches or machines without complex wiring. With a weight of 2.3 kg, the luminaire is heavy enough to remain stable yet light enough for safe handling during installation or repositioning. The included cable length and compact arm dimension favour rapid setup, lowering downtime during assembly or equipment changes. Trusted supply chain and reduced procurement risk Sourced from a recognised manufacturer and distributed via a specialist partner, this lighting solution benefits from a quality filter that supports consistent product standards and reliable availability. Metav’s role as a precision partner ensures items reach European workshops with transparent logistics and an established reputation; the company’s broad catalogue and longstanding customer base reflect a commitment to dependable supply and technical competence. Choose the Vertex VLED-500M for dependable IP67 workshop lighting — contact Metav Werkzeuge in Emmerich for specification support and availability Technical Data SKU: VLED-500M GTIN: 4061905005749 Type: Lampe Brand: Vertex Protection class: IP 67 Facts Power supply: 110V/220V Light output: 9 W (LED) Arm size: 220 x 220 mm (round) Cable length included: 1.8 m Weight: 2.3 kg Special features Waterproof Variants: Halogen or LED Supplied accessory: Cable 1.8 m FAQ What environments is this lamp suitable for? The VLED-500M by Vertex is designed for workshops and industrial areas where IP67 protection against dust and temporary immersion is required. Can the lamp be used with different mains supplies? Yes, the unit supports 110V/220V operation, allowing deployment across sites with varying supply voltages. Is the cable included and what length is it? The Vertex VLED-500M is supplied with a 1.8 m cable, simplifying installation at typical workbench heights. How heavy is the luminaire and does it require special mounting? The luminaire weighs 2.3 kg, enabling secure mounting on standard arms such as the supplied 220 x 220 mm rounded bracket without heavy-duty fixings. Are halogen options available alongside the LED version? The product range includes halogen or LED variants; the listed model features a 9 W LED light source. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
9/16" T-Slot Adapter Single, 7/8x1-1/8x5/8" Thread 1/2-12" & 1/12-13" - Vertex
Secure clamping with compact dimensions and compatible thread options ensures efficient fixture set-up and repeatable positioning on machine tables. Combine the 9/16" T-slot compatibility with a lightweight single-piece design for reliable, low-maintenance operation. Order directly via Metav Werkzeuge or consult our specialists for further technical clarification. 3414I T-slot nut by Vertex — 9/16" T-slot, compact dimensions The 3414I is a T-slot nut designed to secure fixtures and clamps in 9/16" T-slots, providing a straightforward solution for machine tables and modular fixturing. T-slot 9/16" compatible Compact dimensions 7/8×1-1/8×5/8" Single-piece design Lightweight: 0.048 kg Secure clamping for precise setups A T-slot nut is the fundamental interface between a workholding element and the machine table. With the 9/16" T-slot compatibility and the compact external dimensions, this fastener delivers a secure connection for clamps and locators while keeping the clamping assembly low-profile. The reduced mass, at 0.048 kg, helps to simplify handling and positioning during frequent tool changes and fixturing operations, which in turn improves throughput and reduces set-up time in serial production. Faster assembly, fewer complications The single-piece construction and defined thread options mean straightforward installation and repeatable results. Threaded options are supplied as stated, supporting standard clamping hardware and enabling consistent torque transfer to the clamping element. This reduces the likelihood of movement under load and minimises rework. For workshops that prioritise efficiency, the predictable fit and stable retention characteristics translate into fewer interruptions and more reliable machining cycles. Confidence from established supply and stock reliability Sourced from Vertex, this fastener benefits from a focused manufacturing standard and traceable SKU control, giving procurement teams clarity when integrating components into production supplies. Delivered via a specialist supplier, stock is picked and inspected in Emmerich to act as a quality filter for the European market, supporting continued availability and consistent product quality across repeat orders. Contact Metav Werkzeuge today for expert advice on integrating the Vertex 3414I T-slot nut into existing fixturing systems and to arrange prompt supply from our Emmerich stock Technical data Article number: 3414I GTIN: 4061905092596 Manufacturer: Vertex Facts Weight: 0.048 kg Dimensions: 7/8×1-1/8×5/8" T-slot width: 9/16" Thread: 1/2-12" and 1/12-13" Special features Single-piece T-slot nut Designed for fixture and clamp attachment Model family: 3414I FAQ Is this compatible with standard 9/16" T-slots? Yes. The 3414I T-slot nut is specified for 9/16" T-slots and is intended for securing clamps and fixtures within that slot dimension. Which thread sizes are provided? The product data lists thread options as 1/2-12" and 1/12-13", which are supplied as stated in the technical information for the Vertex 3414I. What material is the nut made of? Material information is not specified in the provided data for this item; material details should be requested if required for a specific application. Can this fastener be used for modular fixturing on milling tables? Yes. The T-slot nut is intended for machine table fixturing and offers a low-profile clamping interface suitable for milling and general fixture applications. What is the article number and weight for inventory purposes? Article number (SKU) is 3414I and the weight is 0.048 kg as documented in the product specifications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
9/16" T-Slot Clamp Single, 3/8-16" Thread - Vertex
Take advantage of secure clamping in standard T-slots together with fast, repeatable assembly thanks to the 3/8-16″ threaded interface and compact dimensions; the result is reduced setup time and reliable part location on machine tables. Order the component directly via Metav Werkzeuge or ask our consultants for compatibility advice. Vertex T-slot nut 3433I — 9/16″ T-slot, 3/8-16″ thread The Vertex T-slot nut 3433I is a compact clamping element designed for use in machine table T-slots and fixtures, providing a robust threaded connection for workholding and accessory mounting. Compatible with 9/16″ T-slots 3/8-16″ threaded connection Lightweight 0.048 kg body Single-piece design for stable clamping Precise fit for standard machine tables The 9/16" T-slot dimension ensures direct compatibility with common machine tables and clamping systems used in workshops and production lines. The standardised profile delivers repeatable positioning, reducing time spent on alignment and adjustments. With a 3/8-16″ thread, the component mates with widely used bolts and studs, simplifying inventory management for fastening hardware and avoiding special-order parts. This compatibility supports faster set-ups and a smoother production flow, which is particularly relevant in batch manufacturing and jigs where every minute saved improves throughput. Small, robust and easy to handle At approximately 0.048 kg, the fastener is light enough for efficient handling yet stable during clamping procedures. The compact geometry, given as 7/8 x 1-1/8 x 5/8″, allows installation in confined slots without obstructing adjacent fixtures. The single-piece construction reduces potential points of failure and is suitable where a straightforward, low-maintenance solution is required. For operators and supervisors this means fewer replacement parts and predictable behaviour under normal workshop loads, contributing to consistent process quality. Practical in varied workshop scenarios This clamping element performs well across general machining and assembly tasks: it secures workpieces, supports jigs and holds fixturing accessories. The standardised thread and slot dimensions make the part useful in retrofit projects and when expanding existing clamping fixtures. Because the design avoids specialised interfaces, workshop planners can standardise on familiar fasteners and reduce the number of different spare parts needed at the bench, simplifying logistics and costing models in smaller operations as well as larger production sites. Reliability and traceability for professional use The component conforms to common industrial sizing, making specification and procurement straightforward. The simple, well-documented geometry supports planning, quality assurance and traceability in procurement records. Where part identification is required, the SKU 3433I and GTIN are available for accurate ordering and stock control. Combining established dimensions with consistent manufacturing tolerances helps reduce the risk of misfits and the time lost to trial-and-error adjustments on the shopfloor. Arrange procurement through Metav Werkzeuge for reliable supply and expert advice on integration into existing fixturing systems Technical data Article number: 3433I GTIN: 4061905091988 Weight: 0.048 kg Dimensions: 7/8x1-1/8x5/8" Facts T-slot size: 9/16" Thread: 3/8-16" ECLASS: 21029107 Special features Single-piece unit Brand: Vertex Suitable for standard machine table T-slots FAQ What T-slot size does the fastener fit? The fastener fits a 9/16" T-slot; this standard dimension ensures the part seats correctly in common machine table grooves. Which thread is used for bolting to the nut? The component uses a 3/8-16" thread, compatible with standard imperial bolts and studs for secure clamping. Is the item suitable for retrofitting existing fixtures? Yes, the geometry and thread standard make the part suitable for retrofit work where standard T-slot fasteners are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
90mm Horizontal Clamp M4x25 Push Spindle, 450 N Clamp Force, 520 N Holding Force - Kukamet
Combining a compact lever design, a 450 N clamping force and a horizontal foot for straightforward fixture mounting, this clamp delivers reliable, space-saving workholding for small jigs and assemblies. Order the part directly via Metav Werkzeuge or consult the product specialists for tailored integration advice. Kukamet 111 Horizontal lever clamp — horizontal foot, blackened finish The Kukamet 111 is a compact horizontal lever clamp designed for secure, repeatable workholding in fixtures and jigs where space is limited. Compact horizontal lever clamp Horizontal foot mounting Clamping force 450 N Holding force 520 N Secure clamping with clear performance benefits The compact lever mechanism provides a precise balance between size and performance. With a clamping force of 450 N and a holding force of 520 N, the unit is engineered to keep small components steady during assembly or light machining tasks. The horizontal configuration with a dedicated horizontal foot allows the clamp to be integrated into flat fixture bases without adding vertical obstruction, meaning better access for tools and operators while maintaining consistent pressure across the clamped part. Durable finish and compact construction for workshop longevity A blackened finish offers corrosion resistance and a low-reflective surface that suits industrial environments. The low mass of the device (approx. 0.042 kg) reduces inertia on moving fixtures and supports agile jig design. The combination of robust lever mechanics and a corrosion-resistant surface means the clamp is suitable for repetitive use cycles, helping to reduce maintenance intervals and support continuous production. Fast integration and specification-ready details Fitted with an M4x25 pressure spindle, the clamp is ready for straightforward mechanical integration into predrilled plates or bespoke fixtures. The compact footprint and standardised spindle thread simplify retrofits and new fixture designs alike. For planners and engineers this means predictable installation times and reliable repeatability in positioning; for workshop operatives it means fewer adjustments and faster set-up at the bench or in small production cells. Contact Metav Werkzeuge today for procurement or technical integration advice on this Kukamet horizontal lever clamp and benefit from expert guidance from our Emmerich-based team Technical data SKU: B111-0 GTIN: 8682843522134 ETIM: EC011973 ECLASS: 21041719 Core specifications Clamping force: 450 N Holding force: 520 N Weight: 0.042 kg Angle: 90° Materials & features Material: blackened finish Mounting: horizontal foot Pressure spindle: M4x25 Model designation: 111 Brand: Kukamet FAQ What is the maximum clamping force of this horizontal clamp? The Kukamet 111 horizontal lever clamp (SKU B111-0) delivers a maximum clamping force of 450 N and a holding force of 520 N. How is the clamp mounted in a fixture? Mounting is via a horizontal foot arrangement; the compact base is suited to flat fixture plates and jigs where horizontal attachment is required. What spindle thread does the clamp use for adjustments? Adjustment and contact are provided by an M4x25 pressure spindle, allowing straightforward replacement and compatibility with common fixture hardware. Is the finish suitable for industrial environments? The unit features a blackened finish that improves surface corrosion resistance and reduces glare in typical workshop conditions. Can the clamp be used in tight or space-constrained fixtures? Yes, the compact lever design and horizontal mounting allow installation in confined areas while maintaining consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90mm Horizontal Clamp With Massive Holding Arm, 850N Thrust / 1000N Hold Force - Kukamet
Combine compact design with robust clamping performance: the solid holding arm and angled base deliver dependable fixture mounting and high clamping force for repeatable production. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 113 — Kukamet horizontal clamp with 90 mm arm and 1,000 N holding force A sturdy Horizontal clamp 113 designed for horizontal fixturing and reliable workpiece retention in jigs and fixtures. Solid holding arm, 90 mm length Max. holding force 1,000 N Pressing force up to 850 N Angled base for fixture mounting Secure clamping for precision fixtures The Horizontal clamp 113 combines a solid holding arm with clearly specified forces to provide predictable clamping behaviour in series production. The distinction between pressing force (850 N) and holding force (1,000 N) gives planners measurable data for fixture design: pressing force defines the actuation load, while holding force indicates the maximum sustained grip on the workpiece. This transparent specification supports process planning and reduces setup iteration, contributing to shorter cycle times and higher first-pass yield. Compact footprint that fits tight jigs With a 90 mm arm and a light overall mass, the clamping device is suited to constrained fixture layouts where space optimisation matters. The angled base enables secure mounting on fixture plates or subplates without additional adapters, simplifying assembly and saving space in multi-clamp arrangements. A restrained form factor paired with a robust arm translates into efficient use of bench or fixture real estate while maintaining the clamping reach required for many machining and assembly tasks. Durable finish and dependable operation Durability is delivered through a blackened finish and a massive holding arm, designed for repeated actuation and consistent integrity under production loads. The combination of specified forces and materials supports use across standard metalworking and assembly applications, providing long service life with minimal maintenance. Identifiers such as SKU B113-1-D-C2 and GTIN 8682843522202 make procurement and inventory management straightforward, while the measurable technical data allow integration into tooling documentation and quality records. Discuss integration of the Kukamet Horizontal clamp 113 with Metav Werkzeuge in Emmerich — request tailored advice by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data SKU: B113-1-D-C2 GTIN: 8682843522202 Brand: Kukamet Finish: blackened finish Facts Arm length: 90 mm Angle: 90° Weight: 0.156 kg Max. holding force: 1,000 N Max. pressing force: 850 N ECLASS: 21041719 ETIM: EC011973 Special features Mounting type: angled base Solid holding arm Material: blackened, burnished steel Category: clamp FAQ What is the difference between pressing force and holding force? Pressing force is the actuation load of the clamp; holding force is the maximum sustained grip. The Horizontal clamp 113 lists 850 N pressing force and 1,000 N holding force so fixture design can be dimensioned accurately. Which mounting options are available for this clamp? The unit features an angled base for direct fixture mounting; the design is intended for plate or subplate installation in jigs and fixtures. Is the clamp suitable for frequent cycle applications? Yes. The robust construction, solid holding arm and protective blackened finish are intended for repeated actuation in production environments where consistent retention is required. How is the clamp identified for ordering and stock control? Use SKU B113-1-D-C2 or GTIN 8682843522202 when ordering or registering the component in inventory systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com