Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90mm Horizontal Clamp With Massive Holding Arm, Safety Lock, 850N Thrust/1000N Hold, Zinc-Plated - Kukamet
Take advantage of a compact, zinc-plated lever clamp that combines a massive holding arm with a safety lock for secure, repeatable workholding; benefit from measurable clamping and holding forces to stabilise assembly processes. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal Clamp 113 — Kukamet horizontal lever clamp with 90 mm arm and safety lock The Horizontal Clamp 113 is a compact horizontal lever clamp designed for secure, repeatable workholding in light assembly, jigs and fixtures Massive holding arm and safety locking mechanism Zinc-plated finish for corrosion resistance Angled-foot mounting for simple fixture attachment 1000 N holding force with compact 90 mm arm Secure, measurable clamping for consistent production The clamp delivers a clearly defined combination of holding force and actuation reliability, making it suitable for repetitive tasks where consistency matters. With a maximum holding force of 1000 N and an operational clamping force of 850 N, the device reduces part movement during joining, drilling or light machining operations. The robust construction and safety lock minimise unintentional release, improving process safety and reducing rework. These quantifiable values support predictable cycle times and easier quality control during series production. Compact mounting that simplifies fixture design Designed with a 90 mm arm and an angled foot mounting, the clamp integrates into tight jigs and fixtures without adding unnecessary bulk. The 90° operating angle and low unit weight of 0.155 kg allow multiple clamps to be positioned close to the workpiece for even pressure distribution. The angled foot lets the clamp be secured to plates or frames with standard fasteners, shortening setup time and simplifying retrofitting into existing assemblies. Reduced complexity in fixturing translates into faster changeovers and higher uptime. Durable finish and construction for low maintenance A zinc-plated finish protects the clamp’s surfaces against corrosion in workshop environments, while the massive holding arm provides long-term mechanical stability under frequent use. The simple lever mechanism requires minimal upkeep and the built-in safety locking feature reduces the risk of accidental opening during handling. This combination supports sustained performance in daily shop-floor use and contributes to lower total cost of ownership through reduced downtime and fewer replacements. Choose Kukamet’s Horizontal Clamp 113 for reliable, compact clamping and contact Metav Werkzeuge in Emmerich for supply and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 113-1-D-L-C2 GTIN: 8680731505757 ECLASS: 21041719 ETIM: EC011973 Designation: Horizontal clamp 113 Core technical data Arm length: 90 mm Angle: 90° Maximum clamping force: 850 N Maximum holding force: 1000 N Weight: 0.155 kg Materials & special features Material: zinc-plated steel Mounting: angled foot Massive holding arm Safety locking mechanism Compact lever clamp design FAQ What is the maximum holding capacity of the clamp? The Kukamet Horizontal Clamp 113 provides a maximum holding force of 1000 N and a clamping force of 850 N for secure workholding. How is the clamp mounted to a fixture? The unit is fitted with an angled foot mounting designed for straightforward attachment to plates or fixture bases. Which materials is the clamp suitable for in assembly fixtures? The clamp is intended for light assembly and fixturing applications across common workshop materials; its zinc-plated finish supports use in standard industrial environments. Is a safety mechanism included to prevent accidental opening? Yes, the clamp incorporates a safety locking mechanism to prevent unintended release during handling and operation. What are the identifying codes for ordering or inventory? Refer to SKU 113-1-D-L-C2 and GTIN 8680731505757 when ordering or checking stock Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90mm Horizontal Clamp With Safety Lock, M12x80 Pressure Spindle, Angled Base - Kukamet
Take advantage of a galvanised body, a positive safety locking mechanism and adjustable pressure via the M12x80 spindle for reliable, repeatable clamping in assembly and jigging. Order the clamp directly via Metav Werkzeuge or request tailored advice from our consultants for integration into production workflows. 113 Horizontal toggle clamp by Kukamet — galvanised, safety-lock model 113 Horizontal toggle clamp designed for secure horizontal clamping in production and workshop fixtures Galvanised steel construction Safety locking mechanism included Max clamping force 4,500 N Angle-base mounting for stable fit Consistent, high-force clamping for production needs The robust, galvanised construction delivers long-term resistance to corrosion and wear, making this clamp suitable for repetitive industrial use. With a maximum clamping force of 4,500 N and a holding capacity of 5,000 N, the unit converts operator input into a secure hold, reducing rework and downtime. The mechanical behaviour is predictable: the toggle action maintains pressure even under vibration, which supports consistent part positioning and repeatable cycle times on production lines. For operations that require durable, low-maintenance clamping, this model provides a dependable mechanical solution. Built-in safety locking reduces accidental release Equipped with a safety locking mechanism, the clamp prevents unintended opening during machining or handling, improving workshop safety and process reliability. The lock engages positively once the handle is closed, so clamps remain secure when subjected to shocks or material shifts. This feature not only lowers the risk of damaged parts but also supports compliance with internal safety routines by adding a physical safeguard where procedural checks alone may be insufficient. The result is fewer interruptions and a more confident assembly workflow. Fine adjustment and secure mounting for versatile use Adjustment is straightforward: the M12x80 spindle provides precise pressure setting and compensates for part tolerances, enabling controlled clamping pressure without specialised tools. The angle base (Winkelfuß) ensures stable attachment to fixtures, plates or jigs and simplifies alignment in tight spaces. Together, these details make retrofitting into existing tooling layouts uncomplicated and permit adaptable clamping distances while retaining full mechanical strength. Suitable for workshops and production lines alike Engineered for daily use, the clamp balances performance and user-friendly handling. The moderate weight (1.84 kg) and compact footprint allow it to be mounted where accessibility and space are considerations, while the galvanised finish supports longevity in workshop environments. Whether integrated into a welding jig, assembly station or testing fixture, the clamp delivers repeatable holding performance that supports throughput and reduces process variability. Contact Metav Werkzeuge for specification matching or to request a tailored quotation for the Kukamet 113 clamp; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: 113-5-L GTIN: 8680731501070 Manufacturer: Kukamet Category: Clamp Facts Max clamping force: 4,500 N Max holding force: 5,000 N Spindle size: M12x80 Weight: 1.84 kg ETIM: EC011973 ECLASS: 21041719 Special features Galvanised steel construction Angle-base mounting (Winkelfuß) Safety locking mechanism Catalogue PDF available FAQ What is the maximum clamping force of this clamp? The Kukamet 113 horizontal toggle clamp provides a maximum clamping force of 4,500 N and a holding capacity of 5,000 N. Can the clamping pressure be adjusted for delicate parts? Yes — the M12x80 spindle enables fine adjustment of the applied pressure to suit sensitive components while keeping the clamp stable. Is the clamp suitable for use in humid or corrosive workshop environments? The galvanised finish on the 113 clamp offers enhanced resistance to corrosion, making it suitable for standard workshop conditions and where occasional moisture exposure occurs. How is the clamp mounted to a fixture or jig? The clamp uses an angle base for secure mounting; the base allows straightforward attachment to plates or jigs and aids alignment in confined spaces. Does the clamp include a mechanism to prevent accidental release? Yes, the unit features a positive safety locking mechanism that holds the handle in position and prevents unintended opening during operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90mm MK1 Taper Shank With B12 Drill Chuck Mount, Hardened And Ground - TECWERK
Take advantage of a DIN 238 drill‑chuck taper with a true‑to‑size MK1 taper and a B12 chuck mount in one compact arbor; the hardened and ground finish ensures repeatable seating and long service life. Order the taper arbor directly via Metav Werkzeuge or consult the technical advisers for compatibility checks and fast delivery. Taper arbor MK1 x B12, hardened and ground – 90 mm (TECWERK) Taper arbor MK1 x B12, hardened and ground, for drill‑chuck mounting on drill and lathe spindles DIN 238 drill‑chuck taper Hardened and ground seating For drill and lathe chuck mounting Overall length 90 mm Precise seating for accurate drill‑chuck mounting The taper arbor provides a controlled interface between machine spindle and chuck: the MK1 taper mates to standard Morse‑taper spindles while the B12 bore accepts a matching drill chuck taper. Conformance to DIN 238 guarantees dimensional compatibility with common chucks and spindles, which reduces run‑out and wobble. With a fully hardened and ground finish, the arbor maintains concentricity over repeated mounting cycles, so operators benefit from consistently accurate hole positions and longer tool life. Robust design for workshop reliability and low maintenance Manufactured for daily workshop use, the arbor’s hardened and ground surfaces resist wear and minimise fretting between taper faces. This construction improves repeatability and lowers the need for frequent re‑setting or adjustment. The compact 90 mm overall length keeps the centre of mass close to the spindle, reducing overhang and vibration during drilling and light turning operations. Where dependable alignment matters, this component supports stable, efficient machining with minimal upkeep. Clear standards and simple compatibility checks Marked to the applicable standard (DIN 238), the arbor simplifies equipment matching: the MK1 external taper and B12 chuck mount form a direct, measurable specification for procurement and machine setup. For integrators and workshop managers, this removes ambiguity when specifying chucks or spindle adapters, enabling faster purchasing decisions and fewer returns. If uncertainty remains about compatibility with a specific chuck or spindle, Metav’s advisers can supply the necessary fit data and confirm suitability for the intended machine. For precise chuck mounting and reliable workshop operation, contact Metav Werkzeuge for technical advice and to secure the TECWERK MK1 x B12 taper arbor for immediate supply. Technical data Article number: 2000832312NW Designation: Taper arbor MK1 x B12, hardened and ground, overall length 90 mm Manufacturer: TECWERK Facts Overall length: 90 mm Standard: DIN 238 Taper: MK1 Chuck mount: B12 Special features Drill‑chuck taper to DIN 238 Fully hardened and ground surfaces Intended for mounting drill chucks on drill and turning machines FAQ Is this arbor compatible with standard drill chucks? The taper arbor is manufactured to DIN 238 and accepts chucks with a B12 drill‑chuck taper, so it is compatible with standard B12 chucks when the machine spindle provides an MK1 external taper. What does the hardened and ground finish mean for workshop use? The hardened and ground finish on the arbor improves wear resistance and keeps the seating surfaces stable, which in turn reduces run‑out and extends the service life of both the arbor and the mounted chuck. Can the arbor be used on lathes as well as pillar drills? Yes. The arbor is intended for the mounting of drill chucks on both drill and turning machine spindles when the spindle taper is MK1 and the chuck uses a B12 mount. How should the taper arbor be maintained to preserve accuracy? Keep the taper faces clean and free from chips or coolant residue; periodic inspection and light cleaning before mounting helps preserve concentricity. The hardened and ground surface reduces servicing frequency compared with untreated components. Which SKU identifies this product for ordering? The product is listed under SKU 2000832312NW and supplied under the TECWERK designation for a taper arbor MK1 x B12, overall length 90 mm. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
90mm x 40mm x 40mm Adjustable Permanent Magnet Positioner 250N Holding Force, Max Temp 450°C - TECWERK
Take advantage of the compact dimensions, adjustable alignment and 250 N holding force to secure reliable fixturing in heat-exposed production steps; order via Metav Werkzeuge or consult the technical team for application advice. TECWERK Adjustable permanent magnet positioner, 90 x 40 x 40 mm – 250 N holding force The TECWERK adjustable permanent magnet positioner for secure orientation and positioning in workshop and light industrial fixturing applications. Adjustable orientation for versatile clamping Compact 90 x 40 x 40 mm footprint Holding force 250 N for stable fixturing Tolerates magnet temperatures up to 450 °C Secure fixturing under heat and load The device delivers a holding force of 250 N, ensuring robust retention during light machining and assembly tasks where steady clamping is essential. The maximum magnet operating temperature of 450 °C means the unit maintains magnetic performance in many elevated-temperature processes; the specified lacquer curing temperature of 200 °C further clarifies suitability for environments where painted components or cured coatings are involved. This combination of thermal tolerance and predictable clamping force supports consistent throughput with fewer repositioning operations. Fast alignment with a compact footprint With outer dimensions 90 x 40 x 40 mm and a total length of 190 mm, the positioner occupies minimal bench or fixture space while still offering precise orientation. The adjustable execution allows small angular or positional corrections without swapping tools, reducing setup time and improving cycle efficiency. For workshops needing tight layouts or rapid changeovers, the compact form factor and adjustability translates into measurable time savings and fewer fixture variants. Practical design for workshop reliability Built as a pragmatic fixturing aid, the unit combines a simple mechanical adjustment with magnetic clamping that avoids extra bolts or complex jigs. The TECWERK construction provides repeatable positioning and easy integration into existing fixtures. Supplied as a single unit (packaging unit: 1), the component is suited for replacement or staged use across multiple workstations, supporting a streamlined inventory. The clear technical parameters permit straightforward planning for process engineers and workshop planners seeking dependable magnetic positioning. For an application match or to arrange supply from Metav Werkzeuge, request product advice on the TECWERK adjustable permanent magnet positioner 4000832286NW and discuss delivery from Emmerich. Technical data Article number: 4000832286NW Description: Adjustable permanent magnet positioner, 90 x 40 x 40 mm, holding force 250 N Facts Dimensions: 90 x 40 x 40 mm Total length: 190 mm Holding force: 250 N Maximum magnet operating temperature: 450 °C Lacquer curing temperature: 200 °C Packaging unit: 1 Special features Execution: adjustable Product type: Permanent magnet positioner Brand: TECWERK SKU: 4000832286NW FAQ What holding capacity does the positioner provide? The unit provides a holding force of 250 N, specified for stable fixturing and repeatable magnetic clamping. Can the positioner be used in applications with elevated temperatures? Yes. The positioner’s magnet is rated up to 450 °C, and the lacquer curing temperature is listed as 200 °C, indicating suitability for many high-temperature processes. How compact is the device for integration into fixtures? The footprint is 90 x 40 x 40 mm with a total length of 190 mm, which allows easy integration into tight fixture layouts. Is the orientation adjustable during setup? The execution is adjustable, enabling fine alignment without replacing the unit, which reduces setup time and increases flexibility. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
90psi Pneumatic Tension Rod 200 ft‑lb Torque, 3000 rpm, AC110/220V or DC24V - Vertex
Take advantage of high continuous torque and flexible supply options to maintain steady production while reducing changeover time. The combination of 200 ft‑lb torque, 3,000 rpm capability and a nominal 90 psi / 6.3 kg/cm² air feed supports reliable, repeatable fastening and tensioning operations. Order the pneumatic tension rod directly via Metav Werkzeuge or consult Metav's specialists for application advice. Pneumatic Tension Rod (PD-200-NT50) — 200 ft‑lb torque, 3,000 rpm, Vertex Pneumatic Tension Rod (PD-200-NT50) is an air‑operated tensioning unit for industrial assembly and fastening tasks, designed to deliver consistent torque and rapid cycle rates for production environments 200 ft‑lb torque for heavy-duty fastening High-speed operation: 3,000 rpm Nominal air supply 90 psi / 6.3 kg/cm² Supply options AC 110/220 V and DC 24 V Consistent torque for precise assembly The unit delivers 200 ft‑lb torque, enabling secure fastening and reliable clamping force where reproducibility matters. Torque is the turning force applied at the tool output; specifying a constant torque reduces rework and improves joint integrity. The design is focused on repeatability: the mechanical output is stabilised by the air drive and gearing, which means fewer torque variations in serial processes. The combination of robust torque and controlled actuation reduces assembly errors and supports quality assurance protocols in manufacturing lines. Fast cycle rates with industrial air and electrical options High throughput is supported by a maximum speed of 3,000 rpm, which allows rapid tightening cycles and short takt times in automated or semi-automated lines. The unit operates from a nominal 90 psi / 6.3 kg/cm² compressed‑air supply and accepts multiple electrical feeds (AC 110V, 220V or DC 24V) for control electronics or integrated sensors. These characteristics make the product suitable for integration with PLC systems and pneumatic manifolds. A compact overall mass of 11 kg keeps handling and fixturing requirements moderate while preserving rigidity during operation. Designed for industrial workflow and straightforward integration Built by Vertex and identified as PD-200-NT50, this tension rod is intended for continuous industrial use where durability and serviceability are required. The drive is engineered to be mounted within assembly fixtures or on tool balancers; electrical and pneumatic interfaces are standardised to ease commissioning. Maintenance is simplified by accessible connection points and replaceable wear components, which supports predictable uptime and planned servicing. Compatibility with common factory supplies and control systems reduces installation complexity and streamlines adoption into existing production cells. Contact Metav Werkzeuge for availability, tailored delivery options and technical matching of Vertex pneumatic tension rods — refer to PD-200-NT50 when enquiring and benefit from Metav's local stock and application consultancy. Technical Data SKU: PD-200-NT50 GTIN: 4061905092282 Manufacturer: Vertex eClass: 23309104 Core Specifications Torque: 200 ft‑lb Speed: 3,000 rpm Air pressure: 90 psi / 6.3 kg/cm² Weight: 11 kg Supply voltage: AC 110V / 220V, DC 24V Special features Air‑operated tensioning unit Designed for integration with PLC control Compact, serviceable construction Suitable for repetitive industrial assembly FAQ What applications is this tension rod suitable for? This pneumatic tension rod by Vertex (PD-200-NT50) is suitable for industrial assembly and fastening tasks requiring consistent torque and rapid cycle times. What air and electrical supplies are required? The unit requires a nominal air supply of 90 psi / 6.3 kg/cm² and accepts AC 110V or 220V or DC 24V for control interfaces. How does the specified torque relate to fastening quality? The 200 ft‑lb torque rating indicates the maximum consistent turning force; using the PD-200-NT50 at the specified torque improves joint reliability and reduces the risk of under‑ or over‑tightening. Is the unit ready for PLC integration? Yes, the PD-200-NT50 is designed with standard electrical and pneumatic interfaces to facilitate integration with PLCs and automated control systems. What maintenance is recommended to ensure long service life? Regular inspection of pneumatic seals and drive components, adherence to filtered and lubricated air supply specifications, and scheduled replacement of wear parts will maintain performance of the Vertex tension rod. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
90° 1000 N Horizontal Clamp With Massive Holding Arm And Safety Lock, Galvanised - Kukamet
Benefit from a durable combination of a 93 mm holding arm, galvanised finish and a secure safety latch for dependable clamping in repeat production; order the clamp directly via Metav Werkzeuge or consult the technical advisors for selection and delivery. Horizontal toggle clamp 111 by Kukamet — horizontal clamp with 93 mm arm and safety latch 111 is a compact horizontal toggle clamp designed for reliable 90° workpiece retention in assembly, jigs and fixture applications, featuring a galvanised body and a heavy-duty holding arm. Horizontal mounting with 90° clamping angle Massive holding arm and safety latch Galvanised for corrosion resistance Holding force up to 1,000 N Consistent clamping power for repeatable processes The unit delivers a precise combination of clamping force 850 N and holding force 1,000 N, which translates into dependable retention during repetitive operations and reduces the likelihood of part movement or rework. The toggle action converts small handle movement into significant locking force via the toggle mechanism, enabling rapid clamping cycles and consistent results on the production line. This mechanical advantage supports efficient throughput without reliance on complex actuators. Corrosion-resistant construction with integrated safety A galvanised finish protects the clamp against corrosion in standard workshop environments, extending service life and retaining reliable function over time. The massive holding arm and the built-in safety latch ensure locked parts remain secure even under vibration or intermittent loading, providing both process security and operator reassurance. Where visible locking is required, the latch gives a clear mechanical indication that the clamp is engaged. Space-saving design that simplifies fixture layout With a 93 mm arm and horizontal foot mounting, the clamp occupies minimal space on a fixture plate while providing a defined 90° clamping angle for perpendicular retention. The low-profile configuration and light weight (approx. 0.1 kg) allow multiple units to be arranged densely on jigs or modular tooling racks without adding significant mass. For engineers planning fixture layouts, the compact form factor facilitates flexible placement and fast part changeovers. Secure production with Kukamet build quality — contact Metav Werkzeuge for procurement, specification support and supply from Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 111-1-D-L-C2 GTIN: 8680731505290 Manufacturer: Kukamet Facts Arm length: 93 mm Clamping force: 850 N Holding force: 1,000 N Angle: 90° Weight: 0.1 kg Special features Material: Galvanised Mounting: Horizontal foot Massive holding arm Safety latch Category: Clamp FAQ What maximum holding force does this clamp provide? The 111 horizontal toggle clamp offers a holding force of up to 1,000 N, giving robust retention for many assembly and fixturing tasks. Is the clamp suitable for use in humid workshop environments? Yes, the galvanised finish on the 111 provides corrosion resistance suited to standard workshop and light industrial conditions. How much travel does the clamp arm offer and what is its length? The clamp features a 93 mm arm length; travel is determined by fixture geometry and the toggle stroke of the unit. Can the clamp be secured visibly when engaged? The integrated safety latch provides a positive mechanical lock and a clear indication when the clamp is engaged. What mounting arrangement is required for installation? The unit is supplied for horizontal foot mounting and is designed to secure workpieces at a 90° clamping angle. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1000 N Horizontal Clamp With Safety Lock, Stainless Steel - Kukamet
Take advantage of a compact clamp that pairs stainless steel durability with a safety locking mechanism and reliable clamping performance to streamline fixture work and reduce rework. Order this horizontal toggle clamp directly via Metav Werkzeuge or consult our specialists for selection support. Horizontal toggle clamp 112 — Kukamet horizontal clamp with stainless steel body and safety lock The Horizontal toggle clamp 112 secures workpieces at a 90° clamping angle for fixtures and jigs in repetitive assembly and light machining operations. Stainless steel construction Integrated safety lock Up to 1,000 N clamping force Vertical-foot mounting, 90° clamping Consistent clamping where accuracy matters This horizontal toggle clamp delivers reliable repeatability in production environments by converting operator motion into a defined 1,000 N clamping force with a holding capability of 1,200 N. The 90° clamping orientation stabilises parts in fixtures and simplifies alignment, reducing cycle time and the need for frequent repositioning. Clear mechanical action and a defined clamping stroke support consistent process quality and fewer rejects, which benefits small-batch assembly as well as serial production. Durability engineered for busy workshops Constructed from stainless steel, the unit resists corrosion and stands up to daily handling and cleaning regimes typical in busy workshops. The integrated safety lock prevents accidental release under vibration or during handling, improving operator safety and process security. At approximately 0.225 kg, the clamp is lightweight for easy integration into portable jigs while remaining robust enough for repeated use, lowering maintenance requirements and total life-cycle cost. Fast installation and broad fixture compatibility Designed for vertical-foot mounting, the clamp accepts an M6x40 spindle for simple attachment to plates and bases, streamlining assembly of bespoke fixtures. The compact footprint and standard fixing dimensions ease retrofitting into existing tooling layouts and enable quick fixture changes on the shop floor. Clear mechanical function and standardised interfaces help accelerate tooling set-up and reduce downtime, supporting more efficient production flows. For secure, repeatable clamping solutions from Kukamet, contact Metav Werkzeuge for specification advice and fast supply from our Emmerich hub — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: S112-2-L GTIN: 8680731508963 Manufacturer: Kukamet Core technical data Max clamping force: 1,000 N Holding force: 1,200 N Angle: 90° Weight: 0.225 kg Spindle thread: M6x40 Special features Material: stainless steel Mounting: vertical foot Safety lock: integrated Category: spanner FAQ What types of applications suit this clamp? The clamp is suitable for fixtures, jigs and light assembly work where a horizontal clamping action at 90° is required; the Horizontal toggle clamp 112 is designed for repeatable positioning and fixture integration. Is the clamp corrosion resistant? Yes, the stainless steel construction of the Kukamet clamp provides good resistance to corrosion and supports use in workshops with routine cleaning. How is the clamp mounted to a fixture? Mounting is by a vertical foot with a spindle thread M6x40, enabling straightforward bolting to plates and bases for secure attachment. Can the clamp hold parts under vibration? The integrated safety lock prevents unintended release, improving holding reliability under vibration or intermittent impact. What identifiers are used for ordering or inventory? Reference SKU S112-2-L and GTIN 8680731508963 for procurement and stock management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1000 N Horizontal Clamp With Safety Lock, Zinc Plated - Kukamet
Combine compact design, galvanised corrosion resistance and a secure safety lock to ensure reliable clamping in production fixtures; order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Horizontal clamp 113 — galvanised toggle clamp with safety lock by Kukamet Horizontal clamp 113 is a compact galvanised toggle clamp designed for robust fixture and workholding tasks where a fixed 90° mounting and positive safety locking are required. Galvanised steel construction for corrosion resistance Integrated safety locking mechanism for secure hold Angle-foot mount for 90° installation Suitable for light-duty industrial clamping Reduce setup time with a compact, secure clamp The compact toggle clamp design offers straightforward integration into jigs and fixtures, combining a small footprint with reliable performance. The angle-foot mounting allows a fixed 90° installation that eliminates alignment guesswork, which speeds up machine setup and repeatable positioning. With a galvanised finish, the clamp resists corrosion in workshop environments, extending service life and reducing maintenance intervals. The lever action provides a positive mechanical advantage for efficient clamping, translating a short handle travel into dependable holding power. Confident holding force and controlled actuation for safer work Engineered for repeatable clamping performance, this model provides a distinct separation between actuation and holding capacities: a defined clamping force and a higher holding force ensure components remain secure during machining or assembly. The safety locking mechanism prevents unintentional release under vibration or incidental contact, improving workplace safety and reducing the risk of part movement. The actuating spindle specification allows fine adjustment of the clamping point to accommodate variations in workpiece thickness without sacrificing clamping integrity. Durable materials and simple installation for productive workflows Manufactured in galvanised steel, the clamp resists surface corrosion common in busy workshops and light industrial environments, contributing to predictable long-term behaviour. The supplied actuating spindle thread matches common fixture hardware standards, enabling rapid integration with existing tooling. The overall lightweight construction supports easy handling during assembly without compromising the mechanical stability required for repeated cycles. Where compact, reliable clamping is needed, this clamp supports continuous production runs with minimal intervention. Practical advantages for fixture builders and maintenance teams For fixture designers and maintenance technicians the product delivers practical benefits: reduced inventory complexity through a standardised mounting style, a dependable safety lock that meets common workshop safety expectations, and a straightforward mechanical concept that requires no electricity or pneumatics. The combination of measurable holding force and a compact lever arrangement makes this clamp particularly suitable for small jigs, assembly stations and manual machining fixtures where quick operation and secure retention are priorities. Contact Metav Werkzeuge to specify the Kukamet horizontal clamp 113 for your fixtures and discuss mounting or adjustment options — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 113-2-L GTIN: 8680731500813 Brand: Kukamet Model: 113 Actuating spindle: M6x40 Mounting type: Angle foot Safety locking: Yes Material: Galvanised Angle: 90° Weight: 0.27 kg Maximum pressing force: 1,000 N Maximum holding force: 1,200 N Facts Weight: 0.27 kg Angle: 90° Pressing force: 1,000 N Holding force: 1,200 N Special features Galvanised finish Angle-foot mounting for 90° installation Integrated safety locking mechanism Actuating spindle M6x40 Compact toggle clamp design FAQ What is the maximum holding force of this clamp? The Kukamet horizontal clamp 113 has a maximum holding force of 1,200 N, providing secure retention for light-duty fixture tasks. Can the clamp be mounted at other angles besides 90°? The clamp is supplied with an angle-foot intended for 90° installation; alternative mounting orientations require customised fixture arrangements. Is the locking mechanism automatic or manual? The device features an integrated safety locking mechanism that secures the lever in the clamped position and prevents accidental release during operation. What material is the clamp made from and how does it perform in humid environments? The clamp is manufactured in galvanised steel, which offers improved resistance to corrosion and is suitable for workshop environments with moderate humidity. Which spindle thread is used for adjustment? Adjustment is via an M6x40 actuating spindle, allowing simple fine-tuning of the clamping point to match workpiece thickness. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 100mm Horizontal Clamp With Heavy-Duty Arm And Safety Lock, 3.65kN Hold Force - Kukamet
Robust clamping with a massive holding arm, a secure safety lock and a compact 100 mm reach deliver dependable, repeatable workholding for jigging and fixturing; benefit from high holding and pressing forces for efficient cycle times. Order directly via Metav Werkzeuge or ask the technical consultants for application advice. Horizontal clamp 112 — 100 mm arm, 90° lever clamp (Kukamet) The Horizontal clamp 112 is a compact 90° lever clamp designed for secure, repeatable workholding in fixtures and jigs where space and reliability matter Massive holding arm for durable operation Safety locking mechanism for secure clamping 100 mm arm length for compact applications Max holding force 3,650 N for heavy clamping Durable clamping that shortens cycle times A compact lever design combines a massive holding arm with a dedicated safety lock, producing consistent clamping forces that reduce rework and downtime. The specification of 3,650 N holding force and 3,500 N pressing force ensures that the clamp holds components steadily during machining or assembly, so setups remain precise across repeated cycles. For production environments the combination of robust mechanics and repeatable force contributes directly to throughput gains and fewer fixture interventions. Compact mounting and straightforward integration Designed for fixed installation on a vertical foot, the clamp offers a measured reach of 100 mm at a right angle, enabling secure positioning in space-constrained jigs. The compact mass—approximately 0.73 kg—and the blackened finish make the device easy to integrate without adding excessive weight to the fixture. The 90° lever geometry enables quick actuation yet delivers high clamping efficiency; the vertical foot mounting keeps the tool accessible while maintaining a low profile on the workbench. Practical benefits for workshops and small series production Where repeatability and reliability are decisive, this lever clamp supports faster setup and safer handling. The straightforward mechanism minimises operator adjustments and the safety locking mechanism reduces the risk of accidental release, supporting safer workflows. Sourced through Metav’s distribution network, procurement is backed by a quality filter in Emmerich and access to application advice for bespoke requirements. For additional technical data or material compatibility questions, the Metav team is available by email or phone. Secure fixture performance with Kukamet’s robust 112 clamp—contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery. Technical data SKU: B112-4-D-L-C1 Article: Horizontal clamp 112 EClass: 21041719 ETIM: EC011973 Facts Arm length: 100 mm Angle: 90° Max pressing force: 3,500 N Max holding force: 3,650 N Weight: 0.73 kg Special features Mounting: vertical foot Finish: blackened Massive holding arm Safety locking mechanism Lever clamp type FAQ What clamping force can be expected from this clamp? The Horizontal clamp 112 from Kukamet delivers a maximum holding force of 3,650 N and a pressing force of 3,500 N, providing secure fixation for demanding tasks. Is the clamp suitable for confined fixture spaces? Yes, the 100 mm arm and compact 90° lever layout make the Kukamet Horizontal clamp 112 well suited to tight jigs and compact fixtures. How is the clamp mounted to a fixture? Mounting is by a vertical foot; the design of the Horizontal clamp 112 (SKU B112-4-D-L-C1) keeps the unit stable while allowing accessible actuation. Does the finish offer any practical benefits? The clamp is supplied with a blackened finish, which is typical for workshop hardware and helps to reduce visible wear while retaining a compact visual profile. What safety features does the clamp provide? A dedicated safety locking mechanism prevents accidental release during machining; the robust holding arm further increases operational reliability in Kukamet’s Horizontal clamp 112. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 100mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 3.65kN Hold Force - Kukamet
Benefit from the combination of a heavy-duty retaining arm with safety lock, galvanised construction and a high holding force for consistent clamping results. Order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Horizontal clamp 112 by Kukamet — heavy-duty arm, up to 3.65 kN holding force The Horizontal clamp 112 is a compact toggle clamp designed for secure workholding in workshop and production fixtures, featuring a vertical-foot mounting for stable installation. Heavy-duty retaining arm with safety lock Galvanised finish for corrosion resistance 3,650 N maximum holding force Vertical-foot mounting for stable installation Consistent clamping force that reduces rework The clamp delivers a maximum holding force of 3,650 N and a pressing force of 3,500 N, values that ensure firm fixation of small to medium workpieces during machining, assembly or testing tasks. Stated forces describe the mechanical capacity under normal operating conditions; the clear numerical specification enables reliable selection against process demands and contributes to reduced cycle times and fewer clamp-related rejects. The robust force figures make this toggle clamp a practical choice where repeatable pressure and positional stability are required. Durable construction for long service life Constructed from galvanised steel and equipped with a heavy-duty arm, the device resists corrosion and mechanical wear in demanding workshop environments. The integrated safety lock prevents accidental opening under vibration or impact, enhancing operator safety and process reliability. These attributes translate into lower replacement frequency and predictable maintenance intervals, supporting continuous production with minimal interruptions. Space-conscious mounting with precise geometry The clamp is supplied for vertical-foot installation and features a 100 mm arm, allowing compact fixture layouts and straightforward integration into jigs and benches where space is limited. The defined 90° operating angle facilitates repeatable positioning and simplifies fixture design, while the modest weight of 0.73 kg supports easy handling during assembly of clamping stations. Clear mounting geometry reduces setup time and supports efficient fixture standardisation across similar tasks. Practical applications and handling notes Designed for general-purpose clamping tasks, this toggle clamp suits repetitive holding operations in light industrial, maintenance and fabrication settings. The galvanised finish and mechanical locking make it suitable for environments where occasional exposure to moisture occurs. For installation, use secure fastening to the mounting surface and verify the locking engagement before first production runs. The emphasised mechanical features support operators who prioritise reliability and quick clamping cycles without complex adjustments. Choose the Kukamet Horizontal clamp 112 for dependable, low-maintenance clamping — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 112-4-D-L-C1 GTIN: 8680731500608 Manufacturer: Kukamet Facts Weight: 0.73 kg Arm length: 100 mm Angle: 90° Maximum pressing force: 3,500 N Maximum holding force: 3,650 N Mounting type: vertical foot eClass: 21041719 ETIM: EC011973 Special features Galvanised material Heavy-duty arm and safety lock Vertical-foot mounting Compact, low-weight design FAQ What maximum holding force does this clamp provide? The clamp offers a maximum holding force of 3,650 N as specified for the Kukamet Horizontal clamp 112 (SKU 112-4-D-L-C1). Is the clamp suitable for damp workshop environments? Yes, the galvanised finish on the Kukamet clamp provides enhanced corrosion resistance, making it appropriate for workshops with occasional moisture exposure. How is the clamp mounted? Mounting is via a vertical foot; the design and the specified 100 mm arm simplify installation into jigs and bench fixtures. Does the clamp have a safety feature to prevent accidental opening? A mechanical safety lock is integrated in the heavy-duty arm to prevent unintended release under vibration or impact. Can the clamp be used in automated fixtures? The clamp’s compact geometry and repeatable 90° operating angle make it suitable for standardised fixtures; evaluation for specific automation systems is recommended. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 100mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 3500N Clamp Force - Kukamet
Robust clamping with a 3,650 N holding force and a zinc-plated finish ensures dependable fixation in repetitive production tasks; the compact 100 mm arm and horizontal base enable space-efficient installation. Benefit from a solid build and safety locking for consistent results — order through Metav Werkzeuge or contact our advisers for application support. Horizontalspanner 111 — horizontal clamp with 100 mm arm and safety lock (Kukamet) Horizontalspanner 111 is a sturdy horizontal clamp for quick, secure fixture in workshop and light-production environments, optimised for repetitive clamping and compact setups Massive holding arm with safety lock Zinc-plated corrosion-resistant finish 100 mm arm for compact clamping Holding force up to 3,650 N Secure fixation for repeatable production The Horizontalspanner 111 delivers a measurable improvement in process reliability through its high holding force and concise geometry. With a holding force of 3,650 N and a closing force of 3,500 N, the unit maintains consistent clamping pressure across multiple cycles, reducing workpiece shift and scrap rates. The 100 mm arm minimises overhang while the compact mass (approx. 0.73 kg) keeps inertial loads low, making the clamp suitable for jigs, fixtures and short-cycle production where repeatability and cycle time are decisive. Durable construction that reduces downtime Constructed with a zinc-plated finish and a massive holding arm, the clamp resists corrosion and mechanical wear in workshop conditions, extending service life and lowering maintenance needs. The integrated safety locking mechanism secures the lever in the clamped position, preventing accidental release during machining or handling and contributing to workplace safety. The horizontal base mounting provides a flat, stable interface for plate or fixture attachment, enabling straightforward replacement of older or less robust clamping elements. Compact layout and practical mounting for flexible setups A 90° orientation and the horizontal-foot design allow the clamp to be mounted close to the workpiece, conserving valuable table space and enabling denser fixture arrangements. The zinc-plated material combines cost-efficiency with corrosion protection, and the clamp’s geometry supports rapid manual operation as well as integration into semi-automated workstations. For applications requiring controlled press-in or holding operations, the device’s performance characteristics offer a clear, measurable benefit in cycle consistency and fixture stability. Contact Metav Werkzeuge for tailored advice and secure supply of the Kukamet Horizontalspanner 111 from our Emmerich stock, including guidance on integration into existing jigs and delivery options Technical Data SKU: 111-4-D-L-C1 GTIN: 8680731500264 eClass: 21041719 ETIM: EC011973 Facts Arm length: 100 mm Holding force max: 3,650 N Closing force max: 3,500 N Weight: 0.73 kg Angle: 90° Special features Material: zinc-plated Mounting: horizontal base Massive holding arm Safety locking mechanism FAQ What clamping forces does the Horizontalspanner 111 provide? The Horizontalspanner 111 offers a holding force of up to 3,650 N and a closing force of 3,500 N, suitable for light to medium-duty fixture tasks. Is the clamp suitable for corrosive workshop environments? Yes, the zinc-plated finish on the Horizontalspanner 111 provides corrosion resistance for typical workshop conditions and extends service life. How is the clamp mounted to a fixture plate? The clamp is designed for horizontal base mounting, allowing secure attachment to flat fixture plates or jig bases in a 90° orientation. Can the safety locking mechanism prevent accidental release during machining? The integrated safety locking mechanism secures the lever in the clamped position, reducing the risk of unintended opening during handling or machining. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 100mm Horizontal Clamp With Massive Holding Arm, 3.65kN Hold Force - Kukamet
Take advantage of the combination of robust construction, a 3,650 N holding capacity and a 100 mm solid arm for reliable and repeatable workholding. Order the horizontal toggle clamp directly via Metav Werkzeuge or request advice from our consultants. Horizontal toggle clamp 111 — horizontal workholding clamp with 100 mm arm (Kukamet) The Horizontal toggle clamp 111 is a rugged horizontal clamp designed for secure fixture work and repeatable positioning in jigs and assembly stations. Horizontal mounting with robust foot 3,650 N maximum holding force Galvanised finish for corrosion resistance 100 mm solid holding arm Consistent, measurable clamping for production use The clamp delivers a 3,650 N holding force with a maximum clamping or pressing force of 3,500 N, providing measurable results that reduce variation between setups. The reinforced, massive holding arm maintains alignment under load, which helps to lower rework rates and improves component repeatability in series production. The right-angle design (90°) facilitates predictable clamping geometry, while the solid arm length of 100 mm offers a balance between reach and stiffness for fixtures that require defined workpiece clearance. Durable materials and straightforward integration into fixtures Constructed from galvanised steel, this horizontal clamp resists corrosion in workshop environments and sustains long service life with minimal upkeep. The horizontal foot mounting allows direct fastening to plates or tooling blocks, enabling fast integration into jigs without complex adapters. Weighing approximately 0.72 kg, the clamp is compact yet sturdy, supporting toolroom and light-industrial applications where durability and compact footprint matter. The toggle mechanism provides rapid locking and unlocking for efficient cycle times on manual and semi-automated stations. Practical benefits and typical applications Designed for robust workholding in welding jigs, assembly fixtures and general clamping tasks, the clamp offers a reliable toggle action that secures components quickly and safely. Its reinforced arm and secure foot mounting reduce fixture drift and maintain consistent pressure across repetitive cycles. For toolmakers and production engineers looking for a straightforward mechanical clamping solution, this model simplifies fixture design while delivering repeatable holding performance. Where consistent clamping force and corrosion resistance are priorities, the combination of materials and mechanics yields improved process stability. Contact Metav Werkzeuge for ordering, detailed technical advice and fixture recommendations for the Kukamet Horizontal toggle clamp 111; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 111-4-D-C1 GTIN: 8680731500233 Model: 111 Manufacturer: Kukamet Facts Arm length: 100 mm Holding force: 3,650 N Clamping force (max): 3,500 N Weight: 0.72 kg Clamping angle: 90° Special features Material: galvanised Mounting: horizontal foot Massive holding arm Reinforced toggle mechanism eClass: 21041719 ETIM: EC011973 FAQ What is the maximum holding force of this clamp? The maximum holding force is 3,650 N for the Kukamet Horizontal toggle clamp 111, providing a measurable basis for fixture design and repeatability. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot; the horizontal foot design of the Horizontal toggle clamp 111 allows direct bolting to plates or tooling blocks for straightforward integration. What material and finish does the clamp have? The clamp is made from galvanised steel, which gives the product corrosion resistance suitable for typical workshop conditions. Is the arm length suitable for jig work with limited clearance? The 100 mm solid arm offers a compromise between reach and rigidity, making the clamp suitable for many jigs where defined clearance and stiffness are required. Can the clamp be used for repeated production cycles? Yes. The reinforced arm and toggle action of the Kukamet Horizontal toggle clamp 111 are designed for repeatable clamping in production and assembly environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 100mm Horizontal Clamp With Massive Holding Arm, Max Hold 3,650N, Galvanised - Kukamet
A compact, lever-operated clamp that combines a 100 mm reach with a 3,650 N holding force for secure, repeatable workholding; galvanised construction and a vertical-foot mount make it robust and simple to integrate on fixtures. Order the clamp directly via Metav Werkzeuge or ask our consultants if additional specifications are required. Horizontal clamp 112 by Kukamet — 100 mm reach, 3,650 N holding force The Horizontal clamp 112 is a lever-operated workholding clamp designed for fixture and jig applications, mounted on a vertical foot at a 90° orientation for compact assembly-line integration. Massive holding arm for secure clamping Vertical-foot mounting, 90° orientation 100 mm reach for versatile setups Galvanised construction resists corrosion Secure clamping that keeps production moving The robust lever mechanism delivers a high holding force and reliable contact pressure, ensuring components remain fixed during machining, assembly and testing. With a holding force of 3,650 N and a maximum pressing capacity of 3,500 N, the clamp provides the mechanical certainty required for repetitive processes. The defined clamping values reduce rework and downtime, supporting predictable cycle times and stable throughput in production environments. Space-efficient design for flexible fixture layouts A compact footprint and vertical-foot mounting allow the clamp to be fitted in tight fixtures without sacrificing access or tool clearance. The 100 mm arm reach gives a practical balance between reach and compactness, while the massive holding arm improves load distribution and contact stability. At approximately 0.72 kg, the unit is lightweight enough for modular fixturing yet heavy-duty in behaviour, aiding fast reconfiguration and reduced handling effort during setup. Durable finish and low-maintenance operation Finished in galvanised steel, the clamp resists corrosion in workshop environments and maintains consistent performance over time. The simple lever actuation minimises moving parts susceptible to wear, which reduces maintenance intervals and service costs. Installation on a vertical foot at 90° is straightforward, and routine care typically involves only periodic inspection and light lubrication to preserve smooth operation and clamping accuracy. For tailored advice on integrating the Kukamet 112 into existing fixtures, contact Metav Werkzeuge for specification support and fast supply from Emmerich. Technical data Article number: 112-4-D-C1 GTIN: 8682843524084 Category: Spanner eClass: 21041719 ETIM: EC011973 Numbers / Core technical data Arm length: 100 mm Weight: 0.72 kg Max pressing force: 3,500 N Max holding force: 3,650 N Angle: 90° Special features Material: Galvanised Mounting: Vertical foot Massive holding arm Model: 112 SKU: 112-4-D-C1 FAQ What clamping forces does the clamp provide? The Kukamet horizontal clamp 112 offers a maximum holding force of 3,650 N and a pressing capacity of 3,500 N, values intended for secure and repeatable fixture clamping. How is the clamp mounted and oriented? Mounting is on a vertical foot with a 90° orientation, enabling compact integration into fixtures and jigs while maintaining clear lever access. What is the construction and finish of the clamp? The unit is made from galvanised steel and features a massive holding arm to improve contact stability and resistance to workshop corrosion. Is the clamp suitable for modular fixture systems? Yes, the 100 mm arm length and compact, lightweight design support modular fixturing and quick reconfiguration in production and assembly lines. What maintenance is required? Routine maintenance is minimal: periodic inspection, light lubrication of the pivot points and checking fastenings are typically sufficient to retain consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 100mm Horizontal Clamp With Solid Holding Arm, 3.65kN Holding Force - Kukamet
Benefit from a 100 mm arm, up to 3,500 N clamping force and a massive holding arm for secure, repeatable fixturing. The compact weight of 0.72 kg supports easy handling without compromising stability. Order the clamp directly via Metav Werkzeuge or ask the consultants if needed. Horizontal clamp 112 — Kukamet lever clamp with 100 mm arm and 3,500 N force Horizontal clamp 112 is a lever-operated clamp for fixture and jig applications, offering a vertical-foot mounting and a 90° clamping angle for space-saving installation 100 mm holding arm Up to 3,500 N clamping force Vertical-foot mounting Blackened finish for corrosion resistance Reliable force for demanding clamping tasks The clamp delivers a clear performance specification: 3,500 N maximum clamping force with a 3,650 N holding capability, making it suitable for repetitive securing of workpieces in production and assembly. These figures indicate how much axial load the mechanism can resist; in practice this enables secure retention during machining, routing or positioning operations where consistent pressure is required. The solid lever design and the massive holding arm reduce flexing under load, improving repeatability and reducing rework. Fast set-up and compact integration into jigs Designed for quick, repeatable operation, the device features a 100 mm arm and a right-angle (90°) actuation that keeps the lever clear of adjacent tooling. The vertical-foot mounting simplifies integration into fixtures and reduces the overall footprint on the fixture plate. At 0.72 kg the unit is lightweight enough to handle during assembly yet substantial enough to provide a rigid clamping point, supporting efficient changeovers and reduced cycle times in manual and semi-automated routines. Durable finish and workshop-ready construction Finished in a blackened finish that improves corrosion resistance and blends into industrial environments, the clamp is built for everyday workshop use. The combination of robust materials and simple lever mechanics means low maintenance and predictable lifecycle behaviour; occasional lubrication and inspection are typically sufficient to maintain performance. The compact geometry and clear force ratings support planning for fixtures where precise and repeatable holding is essential. Contact Metav Werkzeuge for expert advice and reliable supply of the Kukamet Horizontal clamp 112 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B112-4-D-C1 GTIN: 8680731507287 Manufacturer: Kukamet Weight: 0.72 kg Facts Arm length: 100 mm Maximum clamping force: 3,500 N Maximum holding force: 3,650 N Angle: 90° Mounting: vertical foot eClass: 21041719 ETIM: EC011973 Special features Material / finish: blackened finish Massive holding arm Lever-operated horizontal clamp Category: Clamps FAQ What clamping force can be expected in routine use? The Kukamet Horizontal clamp 112 specifies a maximum clamping force of 3,500 N; in routine use this allows secure retention for machining and assembly tasks that require consistent pressure. Is the clamp suitable for integration into jigs and fixtures? Yes — the vertical-foot mounting and compact 90° lever geometry are designed for easy installation into jig plates and fixture assemblies. How durable is the surface treatment? The clamp features a blackened finish that enhances corrosion resistance for workshop environments and reduces visible wear from handling. Can the clamp be used for heavy-duty production cycles? With a massive holding arm and rated holding capability of 3,650 N, the device is designed for repetitive production use where a robust, repeatable clamp point is required. What identifiers should be quoted when ordering spare parts or replacements? Please quote the SKU B112-4-D-C1 and the GTIN 8680731507287 to ensure correct identification of the Kukamet horizontal clamp Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 100mm Pneumatic Clamp With Massive Holding Arm, 3,000N Thrust 3,300N Hold, Galvanised - Kukamet
Benefit from the combination of a 100 mm holding arm, galvanised construction and up to 3,300 N holding force for secure, repeatable clamping in production environments. Order the pneumatic clamp directly via Metav Werkzeuge or consult our specialists for fixture configuration. Pneumatic clamp 651 — Kukamet, 100 mm arm, vertical base The Pneumatic clamp 651 is a compact lever clamp intended for vertical mounting, providing a robust 100 mm holding arm and precise 90° positioning for repeatable workholding. Robust 100 mm holding arm Vertical base for stable mounting Galvanised finish resists corrosion Up to 3,300 N holding force Consistent clamping for reliable cycle times The pneumatic actuation and specified force ratings ensure repeatability across long production runs. With a maximum holding force of 3,300 N and a maximum pressing force of 3,000 N, the unit secures components reliably without frequent retightening, which reduces cycle interruptions and rejects. The pneumatic drive converts compressed-air input into a rapid, consistent clamping motion, making the solution suitable for automated or semi-automated stations where predictable clamping behaviour is essential. Clear numerical ratings support process planning and fixture design. Durable construction for tough workshop environments A galvanised finish and a massive holding arm provide long service life in demanding conditions. The vertical base offers a compact footprint while enabling secure attachment to jigs and fixture plates; the lever clamp layout concentrates force into a short, stiff clamp lever to minimise deflection. Corrosion-resistant coating extends maintenance intervals and preserves tolerances in mixed-material workshops. The robust mechanical design is intended to withstand repetitive loads and retain clamping accuracy over thousands of cycles, supporting consistent quality control. Simple integration and predictable positioning Designed for 90° clamping applications, the unit installs via a vertical base that simplifies alignment in common fixture geometries. The combination of a defined clamp angle and 100 mm arm length reduces the need for extensive adapter hardware, accelerating assembly of modular fixtures. Standardised eClass and ETIM identifiers support parts lists and CAD procurement, while the compact actuator requires minimal space on the assembly table. The consistent stroke and force values ease the calculation of required air pressure and safety margins when integrating the clamp into pneumatic systems. Practical benefits for workshop and production planners Specification-driven data—arm length, angle, material and rated forces—translates directly into operational advantages: shorter setup times, improved throughput and lower rework rates. The galvanised body and sturdy lever design reduce service downtime and extend replacement intervals, which improves total cost of ownership for fixture fleets. When selection or integration questions arise, product documentation and technical codes allow straightforward comparison with existing clamps and ensure coherent fixture planning across multiple lines. Discuss fixture requirements and specify the Kukamet 651 with Metav Werkzeuge to ensure optimal clamping performance in your production set-up Technical data Article number: 651-4-D-C1 Manufacturer: Kukamet Model: 651 Brand: Kukamet Material: Galvanised Mounting: Vertical base Facts Arm length: 100 mm Angle: 90° Max pressing force: 3,000 N Max holding force: 3,300 N eClass: 21021004 ETIM: EC011973 Special features Massive holding arm Lever clamp design Galvanised finish Vertical base for stable mounting FAQ What clamping forces does this unit provide? The Kukamet pneumatic clamp 651 delivers up to 3,300 N holding force and a maximum pressing force of 3,000 N, suitable for medium-duty fixture applications. Is the clamp suitable for outdoor or humid workshop conditions? The galvanised finish on the unit provides enhanced corrosion resistance, making it better suited to humid environments than uncoated alternatives. How is the clamp mounted to a fixture plate? Mounting is via a vertical base designed for stable attachment to fixture plates and modular assembly tables. Can the clamp be used in automated stations? Yes, the pneumatic actuation and repeatable stroke make the clamp appropriate for automated and semi-automated production lines. Does the clamp support 90° positioning only? The design provides a defined 90° clamping orientation; adaptations for other angles would require custom fixturing or adapters. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 108mm Horizontal Clamp Massive Holding Arm, 2.5kN Hold Force - Kukamet
Compact, robust and easy to integrate: the Kukamet Horizontal clamp 113 combines a massive holding arm, a compact 108 mm reach and a blackened finish to provide repeatable clamping up to 2,500 N; order the clamp directly via Metav Werkzeuge or consult their specialists for fixture integration. Kukamet Horizontal clamp 113 – horizontal lever clamp with angle foot mounting and heavy-duty arm The Horizontal clamp 113 is a horizontal lever clamp designed for jigs, fixtures and general workshop applications where strong, repeatable clamping at a right angle is required Heavy-duty holding arm for stable clamping Angle foot mounting for secure installation 2,500 N maximum holding force Compact 108 mm arm reach for tight setups Blackened finish for workshop resilience Consistent, high-force clamping for reliable production A robust clamp construction ensures consistent clamping with a maximum holding force of 2,500 N and a maximum clamping force of 2,300 N. The combination of a massive holding arm and compact design reduces elastic deformation under load, improving repeatability in fixture work. This makes the component particularly suitable for mechanical assembly, welding jigs and machining fixtures where a stable, right‑angle hold is essential. Technical figures like force values and arm reach enable straightforward planning for fixture safety factors and cycle reliability. Space-efficient mounting and durable surface for workshop use The integrated angle foot mounting lets the clamp be mounted close to the workpiece, saving valuable fixture space and enabling low-profile layouts. The blackened finish offers increased resistance to surface wear and a discreet appearance that suits industrial environments. With a compact mass of 0.414 kg and a 108 mm arm length, the unit is easy to position on pallets and plates without adding unnecessary bulk, while the sturdy mounting connection keeps the clamping plane fixed at 90° during repeated cycles. Easy integration into existing tooling and long-term operation Designed as a straightforward mechanical solution, this lever clamp fits conventional fixture patterns and can be combined with locating pins, stops and other clamping elements. The compact footprint and well-defined mechanical data simplify fixture design and allow predictable energy distribution across the clamping system. For production environments seeking durability and predictable behaviour, the clamp supports long service intervals with basic inspection and lubrication rather than extensive upkeep, reducing downtime and maintenance overhead. For reliable, high-force clamping from a trusted brand, order the Kukamet Horizontal clamp 113 via Metav Werkzeuge for secure supply from Emmerich; contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and order coordination Technical data Article number: B113-3-D-C2 GTIN: 8680731507461 eClass: 21041719 ETIM: EC011973 Facts Arm length: 108 mm Angle: 90° Holding force: 2,500 N Clamping force: 2,300 N Weight: 0.414 kg Special features Mounting: angle foot mounting Massive holding arm Finish: blackened finish Category: Spanner Manufacturer: Kukamet FAQ What is the maximum holding force of the clamp? The Kukamet Horizontal clamp 113 delivers a maximum holding force of 2,500 N and a clamping force of 2,300 N. Can this clamp be mounted on a fixture plate at low profile? Yes, the angle foot mounting is intended for secure, space-saving installation close to the workpiece. Is the arm suitable for repetitive production cycles? The heavy-duty arm and robust construction of this lever clamp are designed for repeated clamping operations with predictable repeatability. Which surface treatment does the clamp have? The unit is supplied with a blackened finish, offering improved surface resilience for workshop environments. What size reach does the clamp provide? The compact arm reach is 108 mm, allowing use in tight fixturing situations without excessive overhang. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 108mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 2.5kN Clamping Force - Kukamet
Combine robust galvanised construction with a 2,500 N holding capacity and a compact 90° mounting for reliable, space-saving fixturing; order the horizontal clamp directly via Metav Werkzeuge or consult our advisors if further specification is required. Horizontal Clamp 113 — Kukamet lever clamp with 108 mm arm and safety lock The Horizontal Clamp 113 is a lever-operated horizontal clamp with an angled foot, engineered for secure fixture work in jigs, assembly and repetitive production tasks. Galvanised steel body for corrosion resistance 108 mm heavy-duty holding arm 2,500 N maximum holding force 90° angled foot with safety locking mechanism Consistent clamping force for repeatable results The clamp delivers a 2,500 N maximum holding capacity combined with a robust 108 mm holding arm, providing consistent force across repeated cycles. This lever clamp design converts simple manual actuation into reliable clamping pressure, reducing variability in production runs. The result is fewer rework steps and a measurable improvement in process stability when used in fixtures and assembly jigs where constant force matters. Fits tight layouts and supports flexible mounting A 90° angled foot enables edge-mounted installation on plates and frames, saving workspace and improving tool accessibility. At approximately 0.42 kg, the unit is light enough for compact fixtures yet substantial enough to remain stable during operation. The angled attachment prevents interference with adjacent components and allows integration into modular tooling systems without complex adapters or extensive modification. Durable construction that lowers maintenance requirements Constructed from galvanised steel with a massive holding arm, the clamp resists corrosion and mechanical wear in workshop environments. The integrated safety lock secures the lever in the clamped position, preventing accidental release during handling or vibration-prone processes. These features reduce downtime for upkeep and inspection, delivering longer service intervals and predictable lifecycle performance in everyday industrial use. Streamlines assembly while offering simple adjustment As a compact, toggle-style fixture, this clamp speeds up manual cycle times and simplifies workholding setup. The combination of quick lever action and positive locking provides immediate tactile feedback, which helps operators maintain uniform clamping across batch work. For bespoke fixtures or series production the clamp suits welding, finishing and inspection stations where fast, repeatable operation is required. If clarification on selection or integration is needed, Metav’s technical advisors can provide specification guidance and compatibility checks. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal Clamp 113 into production jigs — our Emmerich team will advise on mounting options and delivery: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 113-3-D-L-C2 GTIN: 8680731500875 Manufacturer: Kukamet Facts Arm length: 108 mm Weight: 0.42 kg Holding force: 2,500 N Maximum pressing force: 2,300 N Angle: 90° Special features Material: Galvanised Mounting: Angled foot (Winkelfuß) Massive holding arm and safety locking mechanism Category: Spanners eClass: 21041719 ETIM: EC011973 FAQ What holding force does the clamp provide? The clamp provides a maximum holding force of 2,500 N, suitable for secure fixture tasks in assembly and jig applications. How is the clamp mounted? Mounting is via an angled foot at 90°, allowing edge installation on plates and fixture frames for compact layouts. Is the clamp suitable for workshop environments with moisture? Yes, the galvanised finish protects the clamp against corrosion, improving durability in workshop conditions. What are the key dimensions to consider for fixture design? Important values are the 108 mm arm length and the overall weight of 0.42 kg; these determine reach and balance in the fixture. Does the clamp include a locking feature for safety? A mechanical safety lock secures the lever in the clamped position to prevent accidental release during operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 110mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 1 200N Hold Force - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution that combines a massive holding arm, a safety lock and a 110 mm lever for reliable fixturing; order the clamp directly via Metav Werkzeuge or consult our specialists if specification guidance is required. Horizontal clamp 113 — horizontal lever clamp with 110 mm arm, galvanised finish (Kukamet) The Horizontal clamp 113 is a right‑angle lever clamp designed for secure, repeatable clamping in workshop and light industrial fixturing applications Robust holding arm with safety lock Galvanised finish for corrosion resistance 110 mm lever arm for extended reach 1,200 N maximum hold capacity Secure, repeatable clamping for production use The 113 is built as a toggle clamp for consistent repeatability in fixture setups. The combination of a massive holding arm and an integrated safety lock reduces the risk of accidental release during machining or assembly, converting manual leverage into stable holding force. With a clearly defined maximum pressing force and a separate holding capacity, the clamp enables precise selection of fixturing components for repeat processes. For production environments where cycle consistency matters, the mechanical simplicity of the design minimises maintenance requirements while maintaining high functional reliability. Fit and functionality for workshop and jigs A galvanised finish protects the clamp against corrosion, making the unit suitable for workshop benches and moderate ambient humidity. The 110 mm arm provides extra reach when working on fixtures where clearance is limited, and the right‑angle orientation supports fixtures that require perpendicular clamping. The compact mass and modest weight allow straightforward retrofitting to existing jigs and tooling boards without compromising rigidity. Where a compact footprint and dependable clamping are required, this lever clamp offers a pragmatic balance between holding capability and ease of integration. Installation, durability and operational benefits Mounting is via an angled base that secures the clamp at a fixed 90° orientation, simplifying alignment during installation and ensuring consistent clamping geometry. The galvanised material finish contributes to long‑term durability under typical workshop conditions, while the mechanical safety lock adds a layer of operational security during handling and transfer. The robust mechanical design reduces the need for frequent adjustments and supports uninterrupted workflows, helping to lower downtime and keep small‑batch or series production running smoothly. Discuss the suitability of the Kukamet 113 horizontal clamp with Metav Werkzeuge — for specification advice and supply from Emmerich please contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 113-2-D-L-C2 GTIN: 8680731500790 Model: 113 Brand: Kukamet Core specifications Arm length: 110 mm Angle: 90° Max pressing force: 1,000 N Max holding capacity: 1,200 N Weight: 0.27 kg Materials and special features Material: galvanised steel Mounting type: angled base (Winkelfuß) Massive holding arm Safety lock Right‑angle lever (toggle) clamp FAQ What maximum holding force can be expected from this clamp? The Horizontal clamp 113 (Kukamet, SKU 113-2-D-L-C2) specifies a maximum holding capacity of 1,200 N and a maximum pressing force of 1,000 N, which should be considered when designing fixtures. Is the clamp suitable for use in a humid workshop environment? The galvanised steel finish on the 113 provides corrosion resistance suitable for typical workshop conditions, extending service life compared with untreated components. How is the clamp mounted and aligned on a fixture? The unit mounts via an angled base at a fixed 90° orientation; this simplifies alignment and ensures consistent clamping geometry for repeatable assembly or machining operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 110mm Horizontal Clamp With Massive Holding Arm, 1,200N Clamp Force - Kukamet
Combining a massive 110 mm holding arm, galvanised construction and up to 1,200 N holding force, this clamp secures workpieces at 90° for reliable production routines; order the clamp directly via Metav Werkzeuge or request advice from our consultants to confirm suitability for the application. Horizontal Clamp 113 — Kukamet angled-base clamp with 110 mm arm A robust Horizontal Clamp 113 for repeatable 90° clamping in jigs and fixtures, featuring a massive galvanised holding arm and an angled base for stable mounting Massive 110 mm holding arm Galvanised construction for corrosion resistance 1,200 N maximum holding force Angled base for stable 90° mounting Reliable right‑angle clamping for fixtures and jigs The design centres on consistently reproducible 90° positioning, enabled by a solid 110 mm arm and a compact body that keeps the clamping point stable under load. Measured performance figures—1,200 N holding force and 1,000 N pressing force—provide a clear basis for selecting the clamp for light to medium production tasks. The compact build and specified forces allow engineers and workshop planners to calculate clamping layouts and safety margins with confidence. Lever-action mechanism for fast, repeatable operation A lever-based actuation delivers quick engagement and release while maintaining clamping integrity. The lever action converts manual input into secure clamping without complex adjustments, making cycle times predictable in assembly processes. The difference between holding and pressing forces is explained by the mechanism geometry: the holding force denotes resistance to part movement, while the pressing force indicates the clamp’s direct contact pressure—both metrics assist process engineers in tooling decisions. Space-saving angled mounting that cuts setup time The angled base allows installation directly on vertical or horizontal fixture plates, reducing the need for additional brackets. Its 90° orientation and compact footprint support denser tooling layouts on fixture plates and welding jigs. The clamp’s low mass and small profile permit multiple clamps to be installed in close succession, enabling efficient workpiece locating and secure fixation without excessive added weight to tooling assemblies. Corrosion-resistant finish for workshop durability Constructed in galvanised steel, the clamp resists surface corrosion common in workshop environments, extending service intervals and reducing replacement cycles. The massive holding arm is dimensioned for long-term rigidity, limiting deformation under repeated loads and thereby preserving clamping accuracy. The finish also simplifies maintenance routines: occasional cleaning and inspection are typically sufficient to retain dependable operation. Practical suitability and planning advantages The clamp suits applications where a predictable manual clamp with a robust arm is required—examples include assembly, light welding jigs and general fixture work. Its measurable specifications make it straightforward to integrate into bills of materials and technical layouts, supporting procurement and production planning alike. The combination of compact form, clear force ratings and corrosion protection supports consistent throughput and reduces uncertainty in everyday shopfloor use. For reliable right‑angle clamping from Kukamet, contact Metav Werkzeuge for ordering and technical clarification — telephone +49 2822 7131930 or eMail info@metav-werkzeuge.com — and benefit from Metav’s workshop expertise and fast supply from Emmerich. Technical data SKU: 113-2-D-C2 GTIN: 8680731500769 Manufacturer: Kukamet Core specifications Arm length: 110 mm Angle: 90° Max holding force: 1,200 N Max pressing force: 1,000 N Weight: 0.282 kg Materials & features Galvanised steel construction Massive holding arm Angled base (Winkelfuß) Lever clamp design FAQ What is the maximum holding force of the clamp? The Kukamet Horizontal Clamp 113 provides a maximum holding force of 1,200 N, a specification intended to help determine suitability for fixture and jig applications. How much pressing force does the clamp deliver at the contact point? The clamp delivers up to 1,000 N pressing force at the contact surface; this value indicates the clamp’s contact pressure for securing workpieces. Can the clamp be mounted for vertical or horizontal clamping planes? Yes, the angled base enables mounting on plates to achieve secure 90° clamping, suitable for both vertical and horizontal fixture orientations. What finish protects the clamp in workshop environments? The clamp is galvanised, offering corrosion resistance to extend service life under typical workshop conditions. Is the clamp suitable for dense fixture layouts where space is limited? The compact design, combined with a 110 mm arm and low mass, supports close‑packed installations on fixture plates for efficient tooling arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 110mm Horizontal Clamp With Massive Holding Arm, Safety Lock, 1 200N Hold Force - Kukamet
Take advantage of the combination of a heavy-duty clamping arm, a reliable safety lock, and compact mounting to keep fixture setup fast and repeatable. Order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if technical matching is required. Kukamet Horizontal clamp »113« – 90° angle-foot toggle clamp with 110 mm arm The Horizontal clamp 113 is a robust toggle clamp for fixture and jig applications, offering a 90° clamping orientation with an angled mounting foot for compact, secure installation Heavy-duty clamping arm with safety lock 90° horizontal clamp with 110 mm arm Blackened finish for corrosion resistance Closing force 1,000 N · holding force 1,200 N Secure, repeatable clamping to reduce setup time The heavy-duty construction and integrated safety lock ensure that workpieces remain clamped without accidental release, which lowers rework and improves throughput on repetitive operations. The lock engages positively when the handle is closed, providing a consistent clamping position for batch production. This mechanical reliability supports efficient fixture cycles and contributes to predictable process quality. Compact mounting that fits tight fixtures and jigs Designed with an angle foot and a 110 mm arm, this toggle clamp offers reach while keeping the mounting footprint small. The 90° orientation is suited to side-loading and edge-clamping tasks in assembly, machining preparation and inspection fixtures. With a low mass of approximately 0.27 kg, the unit integrates easily into modular tooling systems where minimised inertia and quick manipulation are beneficial. Robust performance and corrosion-resistant finish With a closing force of 1,000 N and a holding force of 1,200 N, the clamp secures medium-sized components reliably for downstream processing. The blackened finish provides enhanced resistance to surface corrosion and reduces the need for frequent maintenance, extending service life in workshop environments. Built for sustained use, the clamp balances force capacity with compact dimensions to support dependable production performance. Arrange a technical consultation with Metav Werkzeuge to specify the Kukamet Horizontal clamp 113 for fixture integration and ensure fast, reliable supply from Emmerich Technical data Article number: B113-2-D-L-C2 Manufacturer: Kukamet Model: 113 Core specifications Arm length: 110 mm Clamping angle: 90° Closing force: 1,000 N Holding force: 1,200 N Weight: 0.27 kg eClass: 21041719 ETIM: EC011973 Special features Angle foot mounting Robust clamping arm Safety locking mechanism Blackened finish (Schwarz brüniert) Suitable as a lever/toggle clamp SKU: B113-2-D-L-C2 FAQ What clamping forces are provided by this clamp? The Kukamet Horizontal clamp 113 delivers a closing force of 1,000 N and a holding force of 1,200 N, suitable for securing medium-sized components in fixtures. Can the clamp be fixed to a fixture plate with an angled mounting? Yes, the clamp uses an angle foot for 90° mounting, allowing secure attachment to plates and frames in compact jig designs. Is the surface finish suitable for workshop environments? The blackened finish on the Horizontal clamp 113 provides increased resistance to corrosion and wear, reducing maintenance intervals in standard workshop conditions. For which applications is this toggle clamp most suitable? This toggle clamp is intended for assembly fixtures, inspection jigs and general workshop clamping tasks where a compact, reliable horizontal hold is required. What are the dimensions relevant to fixture planning? Key dimensions for planning are a 110 mm arm length and a 90° clamping orientation; refer to technical drawings for exact mounting-hole positions Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 111 Horizontal Clamp With Massive 116mm Holding Arm, 1,200 N Grip, Galvanised - Kukamet
Take advantage of the combination of robust clamping force, compact dimensions and a corrosion‑resistant finish for reliable fixture performance; order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 111 by Kukamet — solid holding arm, 90° mounting A Horizontal clamp 111 designed for secure right‑angle clamping in jigs and fixtures, offering a compact 116 mm arm and a galvanised finish for workshop durability. Solid holding arm for robust clamping 116 mm holding arm length Galvanised finish for corrosion resistance 90° mounting with horizontal foot Consistent clamping performance that keeps production steady The clamp delivers measurable, repeatable results: a maximum holding force of 1200 N and a thrust capability of 1000 N ensure secure fixation of components during machining and assembly. The solid holding arm reduces flex under load, which helps to maintain part position and reduces rework. For production engineers and fixture designers, this means fewer interruptions and a predictable process window. Technical terms: holding force denotes the static retention capability, while thrust indicates the applied clamping force during engagement. Compact footprint with practical mounting for fixtures With an arm length of 116 mm and a 90° mounting angle, the clamp fits into confined jig layouts without compromising accessibility. The horizontal foot mounting allows the component to sit flush with fixture plates, simplifying alignment and saving valuable bench or machine table space. At a weight of only 0.23 kg, the clamp is easy to position during assembly and contributes minimally to the overall fixture mass, which can be important when tool balance or handling is considered. Durable construction for long service life in workshops Constructed from galvanised steel, the device resists corrosion in everyday workshop environments, reducing maintenance intervals and replacement cycles. The robust design and materials support long‑term reliability, which is particularly relevant for small series production or maintenance departments seeking a durable and cost‑effective clamping solution. The clamp is suitable for integration into standard fixture plates and can be combined with other clamping elements to build modular, adaptable tooling. Choose Kukamet’s 111 horizontal clamp for dependable right‑angle clamping and contact Metav Werkzeuge for supply and technical advice. Technical Data SKU: 111-2-D-C2 GTIN: 8680731500073 eClass: 21041719 ETIM: EC011973 Facts Arm length: 116 mm Weight: 0.23 kg Angle: 90° Maximum holding force: 1200 N Maximum thrust force: 1000 N Special features Material: galvanised steel Mounting: horizontal foot Design feature: solid holding arm Category: clamps Manufacturer: Kukamet FAQ What materials can the Horizontal clamp 111 be used on? The Horizontal clamp 111 is intended for general clamping in fixture and jig applications; material suitability depends on the workpiece and fixture design rather than the clamp itself. What is the maximum clamping force of this clamp? The clamp provides a maximum holding force of 1200 N and a thrust capability of 1000 N, giving secure retention for most light to medium production tasks. How is the clamp mounted in a fixture? The unit uses a horizontal foot for 90° mounting; it is designed to sit flush on fixture plates for straightforward alignment and secure attachment. Is the finish suitable for humid workshop environments? The galvanised finish offers corrosion resistance suitable for standard workshop conditions, extending service life and reducing maintenance. Does the clamp require frequent maintenance? Due to its robust construction and galvanised surface, regular maintenance is minimal; periodic inspection for wear and lubrication of moving joints is recommended. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 111 Horizontal Clamp With Safety Lock, 2.5 kN Holding Force, Blackened Finish - Kukamet
Benefit from a compact, high-performance clamp with a 2,500 N holding force and an integrated safety lock for consistent, secure workholding; the M8x50 pressure spindle and horizontal base ensure fast mounting and reliable repeatability. Order the (Horizontal toggle clamp 111) directly via (Metav Werkzeuge) or ask our consultants if needed. Horizontal toggle clamp 111 — horizontal base, integrated safety lock (Kukamet) Horizontal toggle clamp 111 is a robust lever clamp designed for horizontal mounting in jigs, fixtures and assembly benches where secure, repeatable clamping is essential. Horizontal base for stable mounting Integrated safety lock for secure clamping Max. holding force 2,500 N Pressure spindle M8x50 included Keep production running with consistent clamping power The clamp delivers a combination of 2,300 N clamping force and 2,500 N holding force, providing strong, repeatable restraint for manual and semi-automatic operations. Expressed in practical terms, the holding force equates to roughly 255 kgf, which helps prevent component movement during machining, welding or assembly. The robust force ratings reduce the need for frequent re-positioning, lowering cycle times and cutting the risk of rejects. The result is an efficient workholding component that supports steady throughput and reliable fixture performance. Safety features that protect parts and personnel An integrated safety lock prevents accidental release of the lever and secures the clamped workpiece during pauses or handling. The clamp’s 90° locking angle provides a clear mechanical stop, making engagement and disengagement predictable for operators. This design reduces incidental loosening under vibration and contributes to a safer bench environment, particularly when used in repetitive processes. The locking mechanism is mechanical and visible, offering instant confirmation that the workpiece remains secure without electronic aids. Compact format for simple integration into existing tooling With a horizontal mounting foot and a light overall mass of 0.34 kg, the device is easy to fit into existing fixtures, rails or custom jigs without adding excessive bulk. The included M8x50 pressure spindle allows adjustable contact pressure and compensation for part-height variance, enabling precise set-up in confined spaces. The low profile and modest footprint make it suitable for tight assemblies and transfer systems where space and weight are critical considerations, while still delivering industrial-level clamping performance. Practical applications and finish for workshop use Engineered as a lever-style workholding element, the clamp is ideal for assembly benches, inspection fixtures and clamping points on manual or semi-automated tooling. The blackened finish provides a durable, low-reflective surface that integrates well into professional workshop environments and helps to mask surface wear. The mechanical simplicity supports quick maintenance and long service life, making the component a pragmatic choice for workshops seeking dependable, low-complexity clamping solutions. For technical advice on integrating the Kukamet 111 into fixtures or to request dimensions and mounting recommendations, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com — Metav’s specialists will assist with application guidance and suitability checks Technical data SKU: B111-3-L GTIN: 8680731507027 Article name: Horizontal toggle clamp 111 Manufacturer: Kukamet Facts Max. clamping force: 2,300 N Max. holding force: 2,500 N Clamping angle: 90° Weight: 0.34 kg Pressure spindle: M8x50 Special features Horizontal base (waagerechter Fuß) Safety lock present Blackened finish (Schwarz brüniert) Lever-style clamp (hebelspanner) ECLASS: 21041719 ETIM: EC011973 FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal toggle clamp 111 delivers a clamping force of 2,300 N and a maximum holding force of 2,500 N, suitable for robust manual and semi-automatic workholding. Does the clamp include a safety device to prevent accidental release? Yes — the clamp features an integrated safety lock that secures the lever in the engaged position to reduce the risk of accidental opening during handling. How is the clamp mounted and what spindle is supplied? Mounting is via a horizontal foot and the unit is supplied with an M8x50 pressure spindle for adjustable contact pressure and compensation for part tolerances. Is the clamp suitable for tight or compact fixtures? The device’s low weight (0.34 kg) and horizontal base make it well suited to compact fixtures, assembly benches and narrow tooling spaces. What surface finish does the clamp have? The clamp is supplied with a blackened finish, offering a professional, low-reflective appearance and corrosion-resistant surface treatment. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 111 Horizontal Clamp With Safety Lock, Stainless Steel, 2.3 kN Hold Force - Kukamet
The compact stainless steel horizontal clamp combines a secure 2,500 N holding force, adjustable pressure via an M8x50 pressure spindle and an integrated safety lock to keep fixtures stable and operators safe. Order the horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. 111 Horizontal clamp (S111-3-L) by Kukamet — stainless steel, safety lock The 111 horizontal clamp is a compact stainless steel toggle clamp for secure workholding in jigs and fixtures, designed for horizontal mounting and repeatable production clamping. *Stainless steel construction *Safety locking mechanism *2,500 N holding force *Horizontal base for stable mounting Durable stainless steel body for long service life The clamp's stainless steel construction delivers corrosion resistance and high wear tolerance, ensuring consistent performance in workshop and light industrial environments. A robust material choice reduces replacement frequency and supports continuous production, while the compact design keeps the overall fixture footprint small. This combination of durability and space efficiency helps to maintain throughput without sacrificing reliability. Measurable clamping and holding performance for stable machining Designed to provide precise workholding, the unit offers a clamping force of 2,300 N and a holding force of 2,500 N, values that translate directly into stable fixturing during machining and assembly operations. The M8x50 pressure spindle allows fine adjustment of clamping pressure and compensates for small part tolerances, improving repeatability and reducing the need for rework. These quantifiable specifications make the clamp suitable for repeat production runs where consistent clamping is essential. Safety and mounting that support efficient workflows Fitted with an integrated safety lock, the clamp prevents accidental release and secures the toggle in the closed position, enhancing operator safety and process reliability. The horizontal base (waagerechter Fuß) and a 90° lever angle provide straightforward installation into benches, plates or fixture plates, enabling rapid integration into existing jigs. At only 0.34 kg, the component is easy to handle during assembly yet substantial enough to withstand production use. Low-maintenance design that keeps machines running With a simple mechanical design and corrosion-resistant materials, maintenance requirements are minimal: periodic inspection and light lubrication are typically sufficient. The compact toggle mechanism minimises moving-part exposure and reduces the risk of contamination affecting function. For customers seeking dependable, low-intervention clamping, this clamp supports reduced downtime and predictable handling in daily production. Choose Kukamet quality with the S111-3-L horizontal clamp — contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data Article number: S111-3-L GTIN: 8680731508901 Manufacturer: Kukamet Core specifications Weight: 0.34 kg Holding force max: 2,500 N Clamping force max: 2,300 N Pressure spindle: M8x50 Angle: 90° Features and versions Material: Stainless steel Mounting: horizontal base Safety lock: yes ECLASS: 21041719 ETIM: EC011973 FAQ What materials is the clamp suitable for? The Kukamet horizontal clamp S111-3-L is a general-purpose toggle clamp with a stainless steel body; suitability for specific materials depends on the workpiece and process rather than the clamp itself. How is the clamping pressure adjusted? Adjustment is by the M8x50 pressure spindle, which permits fine tuning of the contact pressure to accommodate part tolerances and improve repeatability with the S111-3-L. Does the clamp lock in the closed position? Yes, the unit features an integrated safety lock that secures the toggle in the closed position to prevent accidental release and to enhance operator safety. Can the clamp be mounted on fixture plates? The clamp is designed for a horizontal base mounting and a 90° lever angle, making it suitable for installation on fixture plates, benches and jigs in production settings. What are the measurable forces for selection? Key values are a clamping force of 2,300 N and a holding force of 2,500 N, which allow accurate assessment for workholding requirements with the S111-3-L. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 111 Horizontal Clamp With Safety Lock, Zinc Plated, 4.5 kN Closing Force / 5 kN Holding Force - Kukamet
Benefit from robust galvanised construction, a positive safety lock and reliable holding capacity to secure fixtures with minimal downtime; order the horizontal clamp directly via Metav Werkzeuge or consult the company’s specialists if required. Horizontal clamp 111 – galvanised lever clamp with safety lock (Kukamet) The Horizontal clamp 111 is a compact 90° lever clamp designed for secure, repeatable workholding on machining and assembly fixtures, suited to integration where a horizontal base is required. Galvanised steel construction Safety lock for secure clamping Horizontal base for fixed mounting 5,000 N holding force Stable, repeatable clamping that reduces setup variance The galvanised lever device delivers a 5,000 N holding force combined with a maximum clamping thrust of 4,500 N, offering a reliable margin between holding and actuation. This performance ensures consistent part retention under machining loads and reduces the frequency of manual re-adjustment; the positive safety lock maintains clamping position during secondary operations, lowering the risk of accidental release. By converting mechanical input into secure workholding, the unit supports higher process repeatability and predictable cycle outcomes. Durable construction engineered for workshop environments A corrosion-resistant galvanised finish and robust steel construction provide long service life in industrial environments. The clamping spindle is specified as M12x80, allowing straightforward replacement or integration with standard fixture hardware. With a compact mass of 1.52 kg the clamp combines rigidity with low bulk, making it suitable for tight assemblies where space is at a premium. The 90° lever orientation yields a low-profile footprint while maintaining mechanical advantage for swift actuation. Straightforward mounting and flexible fixture integration Configured with a horizontal base, the clamp is intended for secure bolting to plates and tooling blocks, facilitating rapid installation into existing jigs or welding tables. The lever-style mechanism enables fast manual operation and simple visual confirmation of engagement, supporting efficient fixture changeovers and short setup times. As a lever clamp the device is well suited to repetitive production tasks and smaller batch runs where reliable, fast clamping is required. The combination of compact design and robust holding characteristics makes this model a practical choice for general workshop and light production use. For specification matching or a tailored quotation, contact Metav Werkzeuge in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 111-5-L GTIN: 8680731500370 Brand: Kukamet Category: Spanner Facts Holding force: 5,000 N Max clamping force: 4,500 N Weight: 1.52 kg Angle: 90° Spindle thread: M12x80 Design & features Material: galvanised Mounting: horizontal base (waagerechter Fuß) Safety lock: present Clamping type: lever clamp FAQ What clamping and holding capacities does the Horizontal clamp 111 provide? The Kukamet Horizontal clamp 111 (SKU 111-5-L) offers a maximum clamping thrust of 4,500 N and a holding force of 5,000 N for secure fixturing during machining and secondary operations. Is the clamp suitable for use in humid or workshop environments? Yes, the Horizontal clamp 111 features a galvanised finish that improves corrosion resistance, making the Kukamet horizontal clamp appropriate for general workshop and light industrial settings. How is the clamp mounted to a fixture or table? The clamp uses a horizontal base for fixed bolting to plates or tooling blocks; the design supports straightforward integration into existing fixtures and welding tables. What spindle connection does the clamping spindle use? The clamping spindle is specified as M12x80, allowing compatibility with standard fastening components and facilitating replacement or adjustment. Does the device include a mechanism to prevent accidental release during operations? Yes, the Kukamet horizontal clamp 111 is equipped with a positive safety lock that secures the lever in the clamped position and reduces the risk of unintended opening. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com