Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° 112 Horizontal Clamp Heavy-Duty Arm Vertical Base 2.5 kN Hold Force Galvanised - Kukamet
Take advantage of a robust, galvanised construction and a massive holding arm to secure workpieces reliably; combine this with a compact vertical-foot mount and a holding force of up to 2,500 N for steady production processes. Order the clamp directly via Metav Werkzeuge or contact our consultants for specification advice. Horizontal clamp 112 — Kukamet lever toggle clamp with 2,500 N holding force Horizontal clamp 112 is a lever-type toggle clamp designed for fastening workpieces in fixtures and jigs, offering a compact mounting footprint and workshop-grade durability. Galvanised steel construction 118 mm arm length for versatile reach Holding force up to 2,500 N Vertical-foot mount for secure installation Secure clamping that speeds up throughput The clamp delivers a clear mechanical advantage through a lever toggle design, providing a holding force of 2,500 N and a maximum pressing force of 2,300 N. These figures translate into reliable retention of components during machining, welding or assembly, reducing part movement and minimising rework. The term holding force here refers to the clamping capacity that resists displacement under load; expressed in newtons, it is a comparable, objective indicator of performance. Integrating this clamp into production fixtures supports repeatable results and shorter cycle times thanks to fast actuation and robust contact pressure. Compact, corrosion-resistant design for workshop environments With a galvanised finish and a massive holding arm, the clamp resists surface corrosion while providing torsional stability under load. The 118 mm arm length offers a balance between reach and compactness, allowing fixtures to remain slim without compromising clamping leverage. The vertical foot mounting suits bench plates and welded fixtures, and the 90° orientation ensures predictable positioning of the clamped part. These design choices mean longer service intervals and fewer replacements, which is particularly valuable where tool changeover costs and downtime must be kept low. Practical supply and integration for professional users Supplied by Kukamet and available through Metav Werkzeuge, this lever toggle clamp fits workshop and industrial settings where dependable mechanical clamping is needed. The clamp’s straightforward geometry simplifies integration into jigs, pallet systems and welded frames; fixing points and orientation are standardised for rapid installation. Metav’s role as a central supplier provides access to stock, technical information and ordering from Emmerich, with the benefit of consolidated sourcing for measurement and clamping systems. The combination of robust clamping, corrosion protection and supply reliability supports consistent quality across production runs. Request a tailored quote from Metav Werkzeuge for the Kukamet Horizontal clamp 112, specifying required clamping configuration and mounting preference — phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 112-3-D-C2 GTIN: 8680731500509 Manufacturer: Kukamet Numbers / Core technical data Arm length: 118 mm Weight: 0.326 kg Holding force (max): 2,500 N Pressing force (max): 2,300 N Angle: 90° Design / Special features Material: galvanised steel Mounting: vertical foot Massive holding arm Type: lever toggle clamp FAQ What holding and pressing forces does the clamp provide? The Horizontal clamp 112 (Kukamet, SKU 112-3-D-C2) offers a holding force of up to 2,500 N and a pressing force of up to 2,300 N for secure retention under load. What is the clamp made from and how resistant is it to corrosion? The clamp is made from galvanised steel, which provides a protective zinc finish for improved resistance to rust in workshop conditions. How is the clamp mounted and what orientation does it have? Mounting is via a vertical foot, with the clamp designed to operate at a 90° orientation suitable for bench plates and welded fixture assemblies. Which applications suit this lever toggle clamp? The clamp is appropriate for fixture work, assembly jigs, welding fixtures and general workshop clamping tasks where a compact, strong toggle clamp is required. What is the reach of the clamping arm? The clamping arm measures 118 mm, offering practical reach for a wide range of component sizes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp Heavy-Duty Holding Arm, 2.5 kN Holding Force, Galvanised - Kukamet
Combine the galvanised construction, massive holding arm and 90° lever action for reliable, repeatable clamping; order the 112 horizontal clamp via Metav Werkzeuge or consult their specialists for procurement and application advice. 112 Horizontal Clamp — Kukamet lever clamp with 90° action and 168 mm arm The 112 horizontal clamp is a galvanised lever clamping device designed for fixed-angle holding in workshop, jig and assembly applications Massive holding arm for stable clamping Galvanised finish for corrosion resistance 90° lever action for secure positioning 168 mm arm reach for deep fixtures Faster, more reliable clamping for production workflows The lever-style design delivers a high clamping force with compact movement, turning manual operations into reproducible tasks. With a maximum clamping force of 2,300 N and a peak holding force of 2,500 N, the device secures workpieces reliably while reducing rework and downtime. The massive holding arm concentrates force where it is needed, improving stability in jigs and fixtures. This repeatability supports efficient batch work and helps maintain consistent part quality on assembly lines. Compact mounting and rapid operation for tight spaces Fitted with a vertical foot for simple installation, the clamp occupies minimal bench space while providing a robust anchoring point. The 168 mm arm reach allows engagement over deeper fixtures without compromising access, and the lever action enables quick open/close cycles that shorten handling times. At 0.354 kg, the unit is lightweight enough for retrofitting existing fixtures yet sturdy in operation. The combination of compact footprint and rapid actuation supports ergonomic handling and smoother process flows in small to medium workshops. Durable finish and low-maintenance service life Constructed from galvanised steel, the clamp resists corrosion in workshop environments, extending service intervals and lowering life-cycle costs. The simple mechanical design limits wear points and enables straightforward inspection; when regular checks are scheduled, the fixture retains accuracy for longer. Suitable for repetitive use in production and maintenance settings, the 112 is designed to integrate into existing tooling setups with minimal adjustment, delivering long-term reliability for demanding clamping tasks. Contact Metav Werkzeuge for a tailored quote or technical advice on integrating the 112 horizontal clamp into existing fixtures — Metav Werkzeuge provides specialist procurement and application support from Emmerich. Technical Data SKU: 112-3-D-C3 GTIN: 8680731500516 ECLASS: 21041719 ETIM: EC011973 Facts Weight: 0.354 kg Arm length: 168 mm Angle: 90° Max clamping force: 2,300 N Max holding force: 2,500 N Special features Material: galvanised Mounting: vertical foot Design: lever clamp Massive holding arm Category: clamp / fixture component FAQ What clamping and holding forces does the clamp provide? The 112 horizontal clamp offers a maximum clamping force of 2,300 N and a holding force of 2,500 N, suitable for robust fixture work in production environments. What material and finish are used for the clamp? The clamp is made from galvanised steel, giving the assembly enhanced resistance to corrosion and longer service life in workshop conditions. How is the clamp mounted and what space does it require? Mounting is via a vertical foot; the lever clamp is compact with a 168 mm arm reach and a weight of 0.354 kg, allowing integration into tight jigs and benches. Is the clamp suitable for repetitive production use? Yes — the lever action and massive holding arm deliver repeatable performance for batch production and jig applications, maintaining clamping consistency over many cycles. Which SKU identifies this product for ordering? Order reference is SKU 112-3-D-C3; the clamp is supplied by Kukamet and can be procured through Metav Werkzeuge for European distribution. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp With 1,000 N Thrust, Massive Holding Arm, Galvanised - Kukamet
Benefit from a compact, high-performance clamp that combines a galvanised finish, a solid holding arm and reliable holding power for repeatable workshop tasks. Use the robust 166 mm reach and up to 1,200 N holding force to speed fixture setup — order via Metav Werkzeuge or contact their consultants for application advice. Horizontal clamp 112 by Kukamet — galvanised, 166 mm arm, 90° mounting A horizontal lever clamp designed for secure, repeatable fixing in jigs and fixtures across small-scale production and maintenance environments. Robust solid holding arm design 166 mm arm for versatile clamping reach Max holding force 1,200 N for secure fixing Vertical foot mounting at 90° for space-saving setup Reliable clamping performance for repetitive workflow The clamp delivers consistent mechanical performance via a lever-actuated mechanism that converts operator motion into secure locking force. With a maximum holding capacity of 1,200 N and a maximum clamping (pressing) force of 1,000 N, the device is suitable for repetitive clamping cycles where repeatability and safety matter. The compact reach of 166 mm gives flexibility in fixture layouts while the light overall mass supports quick repositioning of tooling. These measurable specifications allow planners to integrate the clamp into production cells with predictable outcomes. Compact mounting and ergonomic integration Engineered for a vertical foot installation at 90°, the clamp minimises footprint on benches and fixture plates, making it suitable for dense tooling arrangements and modular jigs. The 90° mounting orientation simplifies alignment with mating parts and reduces the need for additional brackets. Operation is straightforward thanks to the lever design, enabling rapid engagement and release during manual assembly or inspection steps. This combination of compact mounting and intuitive actuation improves throughput without compromising operator ergonomics. Durable material choice and workshop suitability Constructed in galvanised steel, the clamp resists corrosion in typical workshop atmospheres while keeping maintenance requirements low. The solid holding arm increases stiffness and wear resistance under lateral loads, supporting long service life even under frequent cycling. At 0.254 kg, the unit is light enough for easy handling yet engineered for secure fixation when mounted. Its practical design suits small-batch production, maintenance rigs and laboratory fixtures where dependable clamping and low upkeep are priorities. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal clamp 112 into existing fixtures or production lines — Metav Werkzeuge provides industry-grade guidance and rapid supply from Emmerich. Technical Data Article number: 112-2-D-C3 GTIN: 8680731500431 Brand: Kukamet Weight: 0.254 kg SKU: 112-2-D-C3 Facts Arm length: 166 mm Max holding force: 1,200 N Max clamping (pressing) force: 1,000 N Angle: 90° Special features Material: galvanised steel Mounting: vertical foot Design: lever clamp (horizontal) Feature: solid holding arm FAQ What clamping forces can be expected from this clamp? The Kukamet horizontal clamp 112 provides a maximum holding force of 1,200 N and a maximum clamping force of 1,000 N, enabling secure fixing for many workshop fixtures. Is the clamp suitable for compact fixture arrangements? Yes, the 90° vertical foot mounting and 166 mm arm make the clamp suitable for space-conscious installations and dense jig configurations. What material is the clamp made from and how does that affect maintenance? The clamp is made from galvanised steel; this finish reduces corrosion risk and lowers routine maintenance compared with untreated components. Can the clamp be used in high-cycle production environments? The lever mechanism and solid holding arm are designed for repeatable operation, making the clamp appropriate for repetitive manual or semi-automated clamping tasks in production or maintenance. Which product code should be referenced when ordering accessories or spare parts? Reference the article number / SKU 112-2-D-C3 and the Kukamet brand when enquiring about spare parts or compatible fittings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp With Massive Holding Arm And Safety Lock, 5 000 N Holding Force, Zinc-Plated - Kukamet
Take advantage of the combination of a massive holding arm, a secure safety lock and a zinc-plated finish for dependable, repeatable clamping in workshop fixtures; order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 — Kukamet heavy-duty horizontal lever clamp with safety lock The Horizontal clamp 112 is a zinc-plated horizontal lever clamp designed for secure workholding and fixture use in workshops and light industrial jigs. Massive holding arm and safety lock Zinc-plated corrosion-resistant finish Holding force up to 5,000 N 179 mm reach with vertical base mount Consistent clamping performance that reduces rework The clamp delivers reliable clamping with a holding force of 5,000 N and a maximum clamping force of 4,500 N, values that support repeatable setups and reduced part movement during machining or assembly. The lever mechanism provides fast actuation and stable force transmission; this makes the device especially suitable for fixtures where cycle time and positional accuracy matter. Technical terms: "holding force" refers to the maximum static retention, while "clamping force" denotes the applied compressive force during closure. Built for workshop conditions and long service life Constructed from zinc-plated steel and equipped with a massive holding arm, the clamp resists corrosion and mechanical wear typical in busy shops. The vertical foot mounting simplifies fixture attachment and maintains a compact footprint on the workbench or jig plate. With a reach of 179 mm, the arm offers clearance for a wide range of components while the unit weight of 1.42 kg balances stability with ease of handling. Zinc plating is a sacrificial barrier that slows rust formation and prolongs component life. Safe, easy integration into existing fixtures A robust safety lock secures the lever in the clamped position, preventing accidental release during operation and enhancing operator safety. The clamp operates at a fixed 90° angle, facilitating standardised positioning in production fixtures. The lever action means rapid engagement and disengagement, reducing set-up time and increasing throughput in repetitive tasks. The compact design allows integration into bespoke jigs or modular fixture systems without complex modifications. Typical applications and practical benefits Designed as a horizontal lever clamp, the unit is well suited to workholding in assembly benches, inspection fixtures and light machining jigs. It supports tasks requiring repeatable positioning or quick part loading and unloading. The combination of a heavy-duty arm and safety locking mechanism offers confidence when clamping irregular or tall workpieces. Delivered through Metav’s European supply chain, the clamp benefits from local quality oversight and straightforward logistics for professional users. For secure, repeatable clamping choose the Kukamet Horizontal clamp 112 — contact Metav Werkzeuge for purchasing and detailed technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 112-5-D-L-C2 GTIN: 8680731500691 SKU: 112-5-D-L-C2 eClass: 21041719 ETIM: EC011973 Facts Weight: 1.42 kg Arm length: 179 mm Max clamping force: 4,500 N Max holding force: 5,000 N Angle: 90° Special features Material: Zinc-plated Mounting: Vertical foot Massive holding arm Safety lock Lever clamp type FAQ What clamping forces can be expected from the clamp? The Kukamet horizontal clamp 112 provides a maximum clamping force of 4,500 N and a holding force of up to 5,000 N for secure retention in fixtures. How is the clamp mounted to a fixture plate? Mounting is by the vertical foot, which allows the clamp to be bolted directly to a bench or jig plate for a compact installation. Is the clamp suitable for outdoor or humid workshop environments? The zinc-plated finish provides corrosion resistance that is appropriate for humid workshop conditions; periodic inspection and maintenance will extend service life. What safety features prevent accidental release? A dedicated safety lock secures the lever in the clamped position, preventing unintended opening during handling or machine operation. Can the clamp be used for quick-change fixturing and repeated cycles? Yes, the lever action and robust construction make it well suited to repeated engagement and fast part changes in production setups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp With Massive Holding Arm And Safety Lock, 66mm Reach, 1 000N Thrust - Kukamet
Take advantage of a compact, lever-operated horizontal clamp that combines robust holding power and a space-saving vertical base for dependable fixture work; order the clamp directly via Metav Werkzeuge or contact the consultants for clarification. Horizontal clamp 112 — lever clamp with 66 mm arm, 90° orientation (Kukamet) The 112 is a horizontal lever clamp engineered for fixture and workholding tasks, featuring a 90° arm and a vertical base for compact mounting in jigs and assembly stations. Massive holding arm with safety lock Vertical base for compact assembly 66 mm arm length for precise reach Holding force 1,200 N; clamping force 1,000 N Black oxide finish for corrosion resistance Consistent clamping performance for production use The lever-operated horizontal clamp delivers measurable holding and clamping capability: holding force 1,200 N and clamping force 1,000 N, values that define secure fixation under machining and assembly loads. The distinction between holding and clamping force is relevant for fixture planning: holding force indicates the static retention capacity, while clamping force denotes the direct pressure applied by the lever mechanism. These specifications support predictable cycle times and reduced rework in small-batch and repetitive production environments. Compact vertical mounting saves bench space Designed with a vertical base, the clamp enables installation on narrow fixture plates and tooling blocks without compromising reach. The 66 mm arm and 90° orientation provide a defined clearance envelope that simplifies layout planning in compact jigs. Vertical mounting reduces the footprint of the workholding setup and allows closer packing of clamps along a rail or plate, supporting efficient use of table space in crowded benches and automated cells. Robust construction for workshop reliability A massive holding arm and integrated safety lock ensure stable engagement and resistance to vibration during operation. The component’s black oxide finish offers practical corrosion resistance and a non-reflective surface for workshop environments. At approximately 0.2 kg, the unit balances low mass with mechanical resilience, making it suitable for frequent handling and retrofit use in existing fixtures without heavy additional load on tooling plates. Quick integration into fixtures and jigs The lever-action design facilitates fast clamping and unclamping to speed up workstation throughput while maintaining consistent pressure. The horizontal orientation and standardised dimensions make the clamp suitable for a wide range of fixture concepts, including manual jigs and semi-automated stations. The unit’s straightforward mechanics reduce maintenance effort and support uninterrupted operation in production and repair workshops; the clamp is particularly suited to tasks where reliable, repeatable fixation is required. Choose the Kukamet lever clamp via Metav Werkzeuge for dependable fixture clamping; contact Metav Werkzeuge for tailored advice or to confirm compatibility with existing tooling at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B112-2-D-L-C1 Manufacturer: Kukamet SKU: B112-2-D-L-C1 Facts Arm length: 66 mm Angle: 90° Holding force: 1,200 N Clamping force: 1,000 N Weight: 0.2 kg Special features Vertical base (senkrechter Fuß) Massive holding arm Safety locking mechanism Black oxide finish (Schwarz brüniert) Lever-operated horizontal clamp FAQ What clamping and holding forces can be expected from this clamp? The clamp provides a clamping force of 1,000 N and a holding force of 1,200 N, values specified for the Kukamet horizontal clamp 112 to indicate safe fixation under typical workshop loads. Is the clamp suitable for compact fixture layouts? Yes, the vertical base and 66 mm arm make the unit well suited to tight layouts and close-packed clamping arrangements in jigs and small benches. Does the product include a safety feature to prevent accidental release? A built-in safety lock is integrated into the clamp design to secure the lever in the closed position and reduce the risk of unintended release during machining or handling. What surface treatment is applied to the clamp? The product features a black oxide finish, providing corrosion resistance and a matt surface ideal for workshop conditions. Can the clamp be used in manual and semi-automated stations? Yes, the lever-action mechanism and standard geometry allow straightforward use in manual jigs and many semi-automated fixturing systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp With Massive Holding Arm And Safety Lock, 850 N Thrust, Galvanized - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that combines robust holding capacity, a massive holding arm with safety locking, and straightforward vertical mounting for reliable fixture in repetitive production tasks; order directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Horizontal clamp 112 by Kukamet — galvanised lever clamp with safety lock The Horizontal clamp 112 is a galvanised horizontal lever clamp designed for fixed mounting on vertical bases and for secure 90° clamping in small‑scale production and workshop jigs. Galvanised steel construction for corrosion resistance Massive holding arm with integrated safety lock Vertical base fixing for secure installation 93 mm arm length, 90° clamping angle Dependable clamping force that secures workpieces reliably The clamp delivers a maximum holding force of 1,000 N and a maximum pressing force of 850 N, providing measurable resistance to slipping during machining or assembly. The distinction between holding force and pressing force is important: the first indicates the resistant force that keeps the workpiece in place, while the second describes the compressive load the clamp applies. These figures support rational planning of fixture layouts and allow engineers to compare clamping capacity with process forces, reducing reject rates and improving cycle reliability. The galvanised finish contributes to longevity in harsher shop environments. Robust mechanics minimise unplanned downtime A massive holding arm and an integrated safety locking mechanism reduce the risk of accidental release under vibration or impact, increasing operator safety and process stability. The clamp’s lever actuation operates with a direct mechanical linkage that is easy to inspect and service; simple maintenance routines preserve repeatability. The vertical base configuration ensures the clamp remains rigid after mounting, helping to keep set‑ups consistent across batches and limiting fixture adjustments during production changeovers. Compact design for flexible fixture integration With an arm length of 93 mm and a 90° clamping angle, the unit fits into confined jig spaces while maintaining effective reach. The low unit weight supports quick replacement and easy handling during fixture assembly without adding significant mass to tooling. The clamp’s compact geometry is suitable for repeatable positioning in fixtures where space is at a premium, enabling designers to pack multiple clamps around complex part geometries without compromising access for machining or inspection. Corrosion protection and workshop suitability The galvanised surface treatment provides a corrosion‑resistant layer that extends service life in environments subject to coolant mists or elevated humidity. Galvanisation also reduces the frequency of surface maintenance, supporting a straightforward upkeep regime and a predictable lifecycle cost for workshop managers. Combined with the clamp’s solid mechanical construction, the finish contributes to a tool that performs consistently under day‑to‑day production conditions. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal clamp 112 into your fixtures — telephone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 112-1-D-L-C2 GTIN: 8680731502312 Model designation: 112 ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 93 mm Maximum pressing force: 850 N Maximum holding force: 1,000 N Weight: 0.1 kg Clamping angle: 90° Special features Material: galvanised Fixing: vertical base Massive holding arm Safety locking mechanism Lever clamp FAQ What maximum holding force does the clamp provide? The clamp provides a maximum holding force of 1,000 N as stated for the Horizontal clamp 112 (SKU 112-1-D-L-C2). Is the clamp suitable for wet or humid workshop environments? Yes, the galvanised finish on the Kukamet clamp provides corrosion resistance suitable for humid shop conditions and reduces surface maintenance needs. How is the clamp mounted to a fixture? Mounting is performed via a vertical base fixing; the clamp is designed for secure installation on vertical fixture plates. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp With Massive Holding Arm, 4.5 kN Thrust / 5 kN Holding Force, Zinc Plated - Kukamet
Compact durability for reliable clamping: the galvanised, heavy‑duty construction and 4,500 N clamping force combine to deliver consistent fixture stability and low maintenance. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 112 Horizontal clamp (lever clamp) by Kukamet — 4,500 N clamping force, 179 mm arm A robust horizontal lever clamp 112 designed for fixtures and jigs, featuring a vertical foot mounting and galvanised steel construction for lasting workshop performance Massive holding arm, 179 mm reach Vertical foot mounting for secure fit Galvanised steel construction, rust-resistant 4,500 N clamping force, 5,000 N hold force Consistent clamping power for production use The lever clamp delivers a 4,500 N rated clamping force and a maximum 5,000 N holding force, providing measurable stability for repetitive operations. Such numeric values indicate the clamp's capacity to resist displacement under load, which reduces rework and maintains machining tolerances. The clear specification of forces supports process planning and risk assessment in fixtures and assembly stations, enabling informed decisions about clamping points and safety margins. Built for durability and low upkeep Constructed from galvanised steel, the unit resists corrosion in workshop environments, which extends service life and reduces replacement frequency. The massive holding arm with a reach of 179 mm gives improved leverage and load distribution compared with slim-profile alternatives, lowering the risk of deformation under heavy use. The vertical foot mounting at a 90° angle ensures a compact footprint on fixture plates while providing robust attachment to stands or baseplates. Fast integration and dependable operation The horizontal lever mechanism offers straightforward actuation and repeatable clamping behaviour, simplifying jigs and fixture design and shortening setup times. The clamp’s moderate weight (1.485 kg) balances portability and stability, allowing relocation between stations without compromising rigidity. For workshop planners, this means predictable cycle performance and minimal adjustment during batch changes, supporting efficient production flow and fewer stoppages. For tailored guidance on integrating the Kukamet 112 horizontal clamp into fixtures or assemblies, contact Metav Werkzeuge for expert advice and secure supply from our Emmerich operations. Technical data Article number: 112-5-D-C2 GTIN: 8680731500660 ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 179 mm Angle: 90° Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.485 kg SKU: 112-5-D-C2 Special features Material: galvanised steel Mounting: vertical foot Massive holding arm Suitable for fixture and jig use Category: clamps FAQ What clamping and holding forces can be expected from this clamp? The Kukamet 112 horizontal clamp provides a clamping force of 4,500 N and a holding force up to 5,000 N, suitable for medium‑to‑heavy fixture applications. How is the clamp mounted to a workbench or fixture plate? Mounting is via a vertical foot arrangement; the vertical foot mounting ensures a compact, secure attachment to plates or stands for stable operation. Is the clamp suitable for use in humid or dusty workshop environments? The galvanised steel construction offers enhanced corrosion resistance, making the clamp appropriate for typical workshop conditions where moisture or airborne particles may occur. What reach does the holding arm provide and why does it matter? The holding arm extends 179 mm, offering increased leverage and better load distribution, which helps reduce the risk of deformation during repeat clamping cycles. Can this clamp be used for automated fixture systems? The lever action and defined clamping values make the clamp compatible with many fixture concepts; integration depends on the specific automation interfaces and mounting requirements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp With Massive Holding Arm, Safety Lock, 5 000 N Hold Force, Galvanised - Kukamet
Robust galvanised construction and a 129 mm arm combine with up to 5,000 N holding force to deliver dependable, repeatable clamping for jigs and fixtures; the built-in safety lock and vertical-foot mounting speed up setup and reduce downtime. Order the 112 horizontal clamp via Metav Werkzeuge or consult our advisors for application-specific recommendations. Kukamet 112 — Horizontal lever clamp, galvanised finish, 129 mm arm The Kukamet 112 is a horizontal lever clamp designed for secure fixturing in assembly and machining applications, offering a compact profile with a robust locking mechanism. Galvanised steel body for corrosion resistance Compact 129 mm arm for tight setups Safety lock prevents unintentional release Consistent, measurable clamping for reliable production The clamp delivers a clear performance advantage through its combination of 4,500 N clamping force and 5,000 N holding force, ensuring workpieces remain stable during processing. The specification values are directly relevant for fixture design: the holding force reflects the device’s resistance to shear and vibration, while the clamping force defines the pressure applied to the workpiece. For planners and shop managers this means fewer reworks and predictable process stability. Built for durability and operator safety A galvanised finish and a robust arm structure reduce maintenance cycles and protect against surface corrosion in workshop environments. The integrated safety lock provides a positive mechanical stop, preventing accidental opening under load and improving workplace safety. Mounted via a vertical foot, the clamp can be installed on plates or fixturing blocks and oriented at a 90° angle to suit horizontal clamping stations, combining compactness with secure operation. Fast installation and versatile application in fixtures The clamp’s 129 mm arm length and compact footprint make it suitable for use in confined jig spaces and automated assemblies. At only 1.42 kg, the device is easy to position during setup yet sufficiently heavy to remain stable once fixed. Its lever-style actuation allows quick engagement and release, shortening cycle times and supporting higher throughput. The design is particularly suitable for repetitive production, fixture retrofits and toolroom applications where reliable, repeatable clamping is required. Contact Metav Werkzeuge today for tailored guidance on integrating the Kukamet 112 into production fixtures and to confirm suitability for specific materials or machining processes. Technical Data Article number: 112-5-D-L-C1 GTIN: 8680731500684 Manufacturer: Kukamet Facts Weight: 1.42 kg Arm length: 129 mm Clamping force max: 4,500 N Holding force max: 5,000 N Angle: 90° eCl@ss: 21041719 ETIM: EC011973 Special features Material: galvanised steel Mounting: vertical foot Massive holding arm Safety lock Suitable for lever clamping applications FAQ What materials can the Kukamet 112 clamp reliably secure? The Kukamet 112 is designed for general-purpose clamping in jigs and fixtures; its galvanised steel body and robust arm make it suitable for a wide range of common workshop materials used in assembly and machining. How much space is required for installation of the clamp? Installation requires consideration of the 129 mm arm and the vertical-foot mounting; allocate clearance for lever travel and a 90° orientation when integrating the clamp into a fixture. Does the clamp include a locking mechanism to prevent accidental release? Yes, the Kukamet 112 is fitted with a safety lock that provides positive retention of the lever under load to reduce the risk of unintentional opening. Which SKU should be ordered for this horizontal clamp? Order the unit under SKU 112-5-D-L-C1; this refers to the Kukamet 112 horizontal lever clamp in the galvanised finish. Is the clamp suitable for demanding production environments? The galvanised surface and solid arm construction of the Kukamet 112 support durability in regular production use; the quick lever action also helps maintain cycle times in repetitive operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp With Vertical Base, Massive Holding Arm, 1,200 N Hold Force - Kukamet
Take advantage of a compact, high‑force clamping solution that combines a massive holding arm with a vertical foot for secure installation; the result is reliable, repeatable workholding that supports efficient production. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 — compact toggle clamp with massive holding arm and vertical foot (Kukamet) The Horizontal clamp 112 is a compact toggle clamp designed for secure workholding in jigs and fixtures, suitable for light‑duty assembly, welding and general workshop tasks Massive holding arm for rigid clamping Vertical foot for stable installation Max clamp force 1,000 N Lightweight 0.228 kg Increased process reliability through rigid construction The clamp’s massive holding arm provides consistently high clamping stiffness, reducing part movement during machining or assembly and improving repeatability. A robust lever design converts operator input into a controlled clamping action, so fixtures remain stable even under variable loads. The blackened finish offers basic surface protection and reduces visible wear, supporting longer intervals between replacement components and fewer unplanned stops. High clamping and holding forces for small fixtures With a clamp force of 1,000 N and a holding force of 1,200 N, the device supplies notable restraint for its size. The 116 mm arm length balances reach and mechanical advantage, allowing secure engagement with a variety of workpiece profiles while keeping the overall footprint small. These measurable values enable planners to calculate safety margins and select appropriate clamps for specific tasks, avoiding over‑engineering and ensuring efficient use of fixture space. Simple mounting and effortless integration into production Designed with a vertical foot and a 90° operating angle, the clamp is straightforward to attach to standard fixture plates or stops. At 0.228 kg, the component is light enough for rapid assembly into modular jigs yet rigid enough to withstand repetitive cycles. The unit’s toggle mechanism gives a clear locked position, making it suitable for assembly lines, inspection stations and welding jigs where fast manual operation and unmistakable engagement are required. For bespoke fixture concepts, the compact lever clamp adapts well to confined spaces and repetitive handling processes. Contact Metav Werkzeuge for procurement or technical advice on the Kukamet horizontal clamp 112 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: B112-2-D-C2 GTIN: 8682843522189 Manufacturer: Kukamet Facts Arm length: 116 mm Clamp force: 1,000 N Holding force: 1,200 N Weight: 0.228 kg Operating angle: 90° Special features Vertical foot mounting Massive holding arm Blackened finish Compact toggle clamp Model: 112 FAQ What load capacities does this clamp support? The Kukamet horizontal clamp 112 provides a clamp force of 1,000 N and a holding force of 1,200 N, values suitable for many light‑duty fixtures and assembly tasks. Can the clamp be mounted on standard fixture plates? Yes, the vertical foot design of the clamp allows direct mounting to standard fixture plates and modular jig systems. Is the finish corrosion‑resistant? The unit has a blackened finish that offers basic surface protection against wear and light corrosion during normal workshop use. What is the reach of the clamping arm? The clamping arm measures 116 mm, offering a balance between reach and mechanical advantage for typical small‑part applications. Which applications are suitable for this clamp? The clamp is intended for light‑duty assembly, welding jigs, inspection fixtures and general workshop workholding where a compact, repeatable toggle clamp is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 112 Horizontal Clamp, Heavy-Duty Arm, 2.3 kN Thrust, 2.5 kN Hold Force, Black Oxide Finish - Kukamet
Take advantage of a compact, heavy-duty clamp that combines a massive holding arm, reliable vertical-foot mounting and a verified 2,500 N max hold to secure repeatable production results; order the Horizontal clamp 112 directly via Metav Werkzeuge or consult the technical team for integration advice. Horizontal clamp 112 — Kukamet horizontal toggle clamp with 2.5 kN holding force A Horizontal clamp 112 designed for fixture and jig applications where a robust, compact toggle clamp with vertical-foot mounting and a blackened finish is required Massive holding arm construction Vertical-foot mounting for secure fixing Max holding force 2,500 N Blackened finish for wear resistance Secure clamping for consistent machining results The clamp delivers a clear, measurable benefit: 2,500 N maximum holding force paired with a clamping pressure of 2,300 N, providing stable fixation for repeated cycles. This level of force reduces part movement and vibration during machining, which leads to fewer rejects and less rework. The combination of a rigid arm and defined closing travel supports repeatable workholding, increasing throughput on small and medium-sized production runs without complex adjustments. Compact mounting that fits into jigs and fixtures With vertical-foot mounting and a right-angled orientation of 90°, the component integrates easily into tight fixture layouts. The short arm length and low mass (approx. 0.354 kg) make it suitable where minimised inertia and compact design matter. These attributes aid in straightforward jig retrofits and new fixture designs, shortening assembly time and maintaining a low profile on the workbench while still delivering industrial clamping performance. Durable construction for long service life Finished in a blackened coating, the clamp resists surface wear and provides corrosion protection for workshop environments. The massive holding arm and robust lever components are engineered for repeated manual actuation, so maintenance intervals remain long and unexpected downtime is minimised. The solid build quality supports continuous use in metalworking and assembly operations, where durability translates directly into lower lifecycle costs. Simple toggle mechanism for fast, repeatable operation The lever-style toggle design offers fast engagement and reliable locking without complex controls. The mechanism delivers consistent clamping travel and lock position, simplifying set-up and enabling predictable cycle times. For production contexts that need dependable manual clamps, this solution offers straightforward operation and low maintenance, so fixture repeatability and operator ergonomics are improved without added system complexity. Contact Metav Werkzeuge to discuss Kukamet clamp integration and to arrange prompt supply from Emmerich with application-specific advice and technical documentation Technical Data Article number: B112-3-D-C3 GTIN: 8680731507256 Manufacturer: Kukamet Numbers Arm length: 168 mm Max holding force: 2,500 N Max clamping pressure: 2,300 N Weight: 0.354 kg Angle: 90° Special features Mounting type: vertical foot Finish: blackened Massive holding arm Category: toggle clamp FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 2,500 N; the clamping pressure is specified as 2,300 N for the Horizontal clamp 112 from Kukamet. How is the clamp mounted in a fixture? Mounting is by a vertical foot, intended for secure attachment to fixtures and jigs using standard fastening methods compatible with the clamp’s base. Is the finish suitable for workshop environments? Yes, the blackened finish offers surface wear resistance and basic corrosion protection ideal for general workshop and production use. Can this clamp be used for repeated production cycles? The toggle mechanism and massive holding arm are designed for repeatable manual actuation, supporting continuous use with low maintenance requirements. What is the arm length and overall weight? Arm length is 168 mm and the unit weight is approximately 0.354 kg, making it suitable for compact fixtures with limited mass allowance. Does the clamp lock at a specific angle? The clamp has a 90° orientation and provides a defined locked position typical for horizontal toggle clamps. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 113 Horizontal Clamp Heavy-Duty Arm With Safety Lock, Zinc-Plated - Kukamet
Combining a galvanised construction with a 217 mm lever arm and up to 5,000 N holding force, this horizontal clamp delivers secure, repeatable workpiece retention for fixture and jig applications. Benefit from a robust design with a safety locking mechanism and straightforward mounting on a 90° angle base; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 113 (Kukamet) — galvanised, 5,000 N holding force The Horizontal clamp 113 is a lever clamp designed for stable, repeatable clamping in jigs, fixtures and production benches Galvanised steel construction Massive holding arm with safety lock 5,000 N holding force 90° angle base for stable mounting Secure, measurable clamping performance for production The 113 delivers clearly defined figures for industrial use: a holding force of 5,000 N and a maximum clamping/pressing force of 4,500 N, transmitted via a 217 mm lever arm. These values describe different aspects of performance — the clamping force reflects the active pressing action, while the holding force indicates the static retention capability once the clamp is engaged. On-shop-floor decision-making benefits from these objective numbers, as they enable direct comparison with other clamping elements and ensure that fixtures meet necessary retention and safety margins. The galvanised finish adds a predictable layer of protection in moderate workshop environments. Built for durability and safe repetition A massive holding arm combined with a positive safety lock reduces the risk of accidental release during repeated cycles. The structural design focuses on longevity under frequent use: components that take the load are dimensioned to limit deformation, and the locking feature secures the lever in the closed position for safe handling and transport of clamped assemblies. For production lines and jigs where consistency and operator safety are priorities, the combination of robust mechanics and a locking device supports uninterrupted operation and fewer rejects caused by shifting workpieces. Flexible mounting and compact integration The right‑angle or 90° angle base enables straightforward mounting to plates, fixture blocks and assembly tables while keeping the clamp profile compact. With a lever length of 217 mm, the device offers useful leverage without excessive reach, permitting close placement to neighbouring clamps or tooling. At 1.84 kg the unit is light enough for simple positioning yet heavy enough to remain stable once fixed. This balance supports integration into existing fixture designs and makes retrofitting on modular clamping plates uncomplicated. Low maintenance, high repeatability Designed for workshop reliability, the clamp requires only basic upkeep — periodic lubrication of the pivot points and occasional inspection of the locking mechanism. The galvanised body helps reduce surface corrosion and the solid lever geometry minimises play over the life cycle, ensuring repeatable clamping cycles and predictable positioning tolerance. For operations seeking to reduce rework and set-up time, the clamp contributes to a stable production flow by delivering consistent clamp engagement with minimal intervention. Discuss the Kukamet horizontal clamp 113 and mounting options with Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and specification support Technical data SKU: 113-5-D-L-C3 GTIN: 8680731501063 Category: Spanner EClass: 21041719 ETIM: EC011973 Core figures Arm length: 217 mm Holding force (max): 5,000 N Clamping/pressing force (max): 4,500 N Angle: 90° Weight: 1.84 kg Special features Galvanised steel body Angle base (right-angle) mounting Massive holding arm Safety locking mechanism Lever clamp type FAQ What is the difference between holding force and clamping force? The holding force refers to the static retention after the clamp is engaged (the 113: 5,000 N), while the clamping or pressing force is the active force applied during closure (4,500 N for this unit). Is the clamp corrosion-resistant? The horizontal clamp 113 has a galvanised finish that provides basic corrosion protection suitable for general workshop and production environments. How is the clamp mounted in a fixture? Mounting uses the 90° angle base to fasten the clamp to plates or fixture blocks; the right‑angle foot allows secure attachment and compact placement in jig assemblies. What routine maintenance does the clamp require? Maintenance is limited to periodic lubrication of pivots and visual checks of the safety locking mechanism and lever for wear to ensure long-term repeatability. Which applications are best suited to this lever clamp? The 113 is intended for jigs, fixtures and assembly benches where a reliable, repeatable horizontal clamping action is required and a clear specification for holding and clamping forces is needed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 113 Horizontal Clamp With Massive 90mm Arm, 850 N Closing Force, Zinc Plated - Kukamet
Reliable clamping performance is delivered by the combination of a massive holding arm and 1,000 N holding force, while the galvanised 90 mm arm offers corrosion resistance for workshop environments; order the Horizontal toggle clamp 113 via Metav Werkzeuge or consult the technical team for application guidance. Horizontal toggle clamp 113 — 90 mm arm, galvanised, angle base Horizontal toggle clamp 113 is a compact horizontal hold-down clamp intended for secure fixturing in jigs and assembly fixtures, equipped with a 90° opening angle and an angle base for stable mounting. Massive holding arm for reduced deflection 1,000 N holding force for secure fixturing Galvanised finish for corrosion protection Angle base with 90° clamp position Secure clamping for repeatable setups The clamp offers a 1,000 N holding force combined with a pressing force of 850 N, providing consistent retention during repetitive operations. The robust toggle mechanism converts handle movement into reliable clamping action, reducing cycle times and the need for rework. Where repeatability and speed are priorities, the substantial holding performance of this clamp helps maintain process stability and improves throughput on assembly lines and fixture stations. Built for workshop conditions and long service life Constructed from galvanised steel and featuring a massive holding arm, the unit resists wear and environmental exposure while remaining compact and lightweight at approximately 0.156 kg. The solid arm reduces bending and improves load distribution, which translates into longer service intervals and lower maintenance demands. Corrosion-resistant coatings preserve function in humid or workshop environments, supporting dependable operation over time without frequent replacement. Simple integration into existing fixtures The clamp is supplied with an angle base for straightforward mounting at a 90° orientation, enabling fast incorporation into standard jigs and benches. The 90 mm arm length provides a balance between reach and leverage, making it suitable for a wide range of fixturing tasks. Its compact footprint and standardised mounting pattern facilitate retrofitting to existing tooling, while the mechanical toggle design ensures tool-free actuation for rapid clamping and unclamping during production cycles. For purchasing information or application advice on the Kukamet Horizontal toggle clamp 113, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 113-1-D-C2 GTIN: 8680731502930 Manufacturer: Kukamet SKU: 113-1-D-C2 Facts Weight: 0.156 kg Arm length: 90 mm Opening angle: 90° Holding force: 1,000 N Pressing force: 850 N eClass: 21041719 ETIM: EC011973 Special features Galvanised material Massive holding arm Angle base mounting Category: Clamp (Spanner) FAQ What materials is the clamp suitable for? The Horizontal toggle clamp 113 (Kukamet, SKU 113-1-D-C2) is designed for general-purpose fixturing and performs well on common workshop materials when used in appropriate setups. How is the clamp mounted to a fixture? Mounting is achieved via the supplied angle base; the Kukamet Horizontal toggle clamp 113 installs at a 90° position for secure attachment to jigs and benches. What are the key forces provided by the clamp? The device delivers a holding force of 1,000 N and a pressing force of 850 N, ensuring reliable retention during repetitive assembly tasks with the Kukamet Horizontal toggle clamp 113. Is the finish suitable for humid workshop environments? Yes, the galvanised finish on the Kukamet Horizontal toggle clamp 113 provides enhanced corrosion resistance suited to typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 113 Horizontal Clamp With Massive Holding Arm, 2.5 kN Hold Force, Galvanised - Kukamet
Combine a heavy-duty 108 mm arm, galvanised steel construction and a reliable 2,500 N holding force for consistent, repeatable fixturing; order the clamp directly via Metav Werkzeuge or consult our technical advisors for specification support. Horizontal clamp 113 — angle-foot mounting with galvanised heavy-duty arm (Kukamet) A Horizontal clamp 113 designed for robust 90° fixturing in jigs and production fixtures, supplied with an angle-foot mount for compact and repeatable installation. Heavy-duty holding arm Galvanised steel construction 90° angle-foot mounting Max holding force 2,500 N Secure, repeatable clamping for production workflows The Horizontal clamp 113 from Kukamet delivers dependable clamping where repeatability matters. Its heavy-duty holding arm and lever-style actuation ensure a firm mechanical hold with a max holding force of 2,500 N and a maximum clamping (pressing) force of 2,300 N, giving a clear distinction between sustained retention and instantaneous clamp pressure. This separation supports safer setup design and consistent cycle-to-cycle performance, reducing rework and downtime in batch production. Space-efficient mounting with corrosion-resistant construction Designed for compact fixturing, the clamp’s 90° angle-foot mounting and 108 mm arm length enable low-profile installation on fixtures and benches where space is limited. The body is galvanised, which provides a practical level of corrosion resistance suitable for general workshop and assembly environments; the light overall mass (approx. 0.414 kg) makes the unit easy to incorporate into portable jigs while still offering stable performance for repetitive operations. Durable design for long service life and simple integration Built with a massive holding arm and straightforward mounting, the clamp is aimed at production and maintenance settings that require long-lasting components. The compact horizontal layout and lever actuation allow integration into welding jigs, assembly stations and machining fixtures with minimal modification. The robust construction reduces maintenance intervals and, when combined with simple inspection routines, helps maintain clamping accuracy throughout the service life. For reliable clamping performance and tailored advice, request a technical consultation or quote from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance. Technical data Article number: 113-3-D-C2 GTIN: 8680731500844 SKU: 113-3-D-C2 Brand: Kukamet Model: 113 Facts Arm length: 108 mm Angle: 90° Weight: 0.414 kg Max clamping force: 2,300 N Max holding force: 2,500 N eCl@ss: 21041719 ETIM: EC011973 Special features Material: galvanised steel Mounting: angle foot Massive holding arm Category: horizontal clamp / spanner Suitable for lever clamping applications FAQ What clamping and holding forces does the Horizontal clamp 113 provide? The Horizontal clamp 113 by Kukamet offers a maximum clamping (pressing) force of 2,300 N and a maximum holding force of 2,500 N, values that distinguish initial clamp pressure from sustained retention for reliable fixture performance. Is the Horizontal clamp 113 suitable for corrosive or humid workshop environments? The Horizontal clamp 113 has a galvanised steel finish that provides practical corrosion resistance for general workshop and assembly environments; for aggressive or specialised atmospheres, additional surface protection should be considered. How is the clamp mounted and what footprint is required? The Horizontal clamp 113 is fitted with an angle-foot mount for secure 90° installation; the arm length is 108 mm, allowing a compact footprint suitable for jigs, fixtures and bench mounting. Which applications are best suited to this horizontal lever clamp? Kukamet’s Horizontal clamp 113 is designed for jigs, welding fixtures, assembly stations and light production fixturing where a secure, repeatable hold and compact mounting are required. What are the key identifiers and dimensions for ordering and integration? The Horizontal clamp 113 (SKU 113-3-D-C2, GTIN 8680731500844) has an arm length of 108 mm, angle 90°, weight approx. 0.414 kg, and is supplied in galvanised steel for straightforward integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 113 Horizontal Clamp With Massive Holding Arm, 3.65 kN Holding Force - Kukamet
The combination of a massive holding arm and a compact, angled mounting makes this clamp a reliable choice for repetitive horizontal fixturing; its 3,500 N rated clamping force supports stable production processes. Order the clamp directly via Metav Werkzeuge or consult Metav’s specialists for application advice. Horizontal clamp 113 — Kukamet lever clamp with 3,500 N clamping force and 191 mm arm The Horizontal clamp 113 is a robust lever clamp designed for secure horizontal fixturing in workshop and production environments, offering a compact footprint with an angled base for straightforward attachment. Massive holding arm for high rigidity 191 mm arm for extended reach 3,650 N maximum holding force Angle foot for secure horizontal mounting Stable, measurable clamping for reliable processes A focus on measurable performance ensures predictability on the shop floor: the fixture delivers 3,500 N rated clamping force with a maximum holding capability of 3,650 N, values that support repeatable workholding under load. The substantial holding arm reduces elastic deformation during clamping, which in practice means fewer reworks and faster cycle times. These objective figures enable planners to match the clamp to specific jigs or fixtures and to calculate safety margins for machining or assembly tasks. Built for rigidity and simple installation The lever clamp features a 191 mm arm that increases reach without substantially raising the overall bulk of the device. The angled mounting plate (Winkelfuß) allows secure horizontal attachment to tables or fixtures, simplifying integration into existing setups. A blackened finish provides basic surface protection and a discrete industrial appearance. The overall weight of 0.98 kg keeps the clamp manageable for retrofit work while the massive holding arm contributes to torsional stability during operation. Practical advantages that support daily workshop use Designed as a lever-operated horizontal clamp, the unit suits repetitive fixturing where quick engagement and secure retention are required. The compact dimensions and the angled base reduce interference with neighbouring clamps, supporting denser workholding layouts and therefore higher throughput. Robust metalwork and a focused feature set translate into lower maintenance requirements; the simple mechanical design supports long service intervals and straightforward spare-part logic. Discuss application specifics with Metav Werkzeuge for tailored fixturing solutions and the best variant for the intended workload — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B113-4-D-C3 GTIN: 8680731507522 Model: 113 Core specifications Arm length: 191 mm Weight: 0.98 kg Clamping force (max): 3,500 N Holding force (max): 3,650 N Angle: 90° Special features Angle foot mounting Massive holding arm Finish: blackened Category: Spanner eClass: 21041719 ETIM: EC011973 FAQ What materials can be clamped with this lever clamp? The horizontal clamp 113 is a mechanical fixture intended for use with typical workshop workpieces; suitability depends on the clamping surface and fixture design rather than the clamp alone. How is the clamp mounted to a fixture plate? Mounting is achieved via the angled foot, which provides a stable horizontal mounting surface for bolting to tables or fixture plates. Does the clamp resist corrosion in a workshop environment? The device has a blackened finish that offers basic surface protection; further corrosion protection should be considered for aggressive environments. Is the lever arm replaceable if damaged? The clamp’s straightforward mechanical design allows for individual component servicing; check spare-part availability with the supplier or manufacturer. What distinguishes this clamp from lighter-duty fixtures? The combination of a massive holding arm, a 191 mm reach and a 3,500 N clamping rating delivers greater rigidity and holding capacity compared with lighter-duty clamps. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 113 Horizontal Clamp With Safety Lock, Zinc Plated, 2.3 kN Thrust / 2.5 kN Hold - Kukamet
Take advantage of the combination of robust 2,500 N holding force, fast-action lever operation and a zinc‑plated corrosion‑resistant finish for dependable, repeatable clamping in light industrial and workshop jigs. Order the horizontal clamp directly via Metav Werkzeuge or consult our technical team for integration advice. Horizontal clamp 113 (SKU 113-3-L) by Kukamet — 90° angle base, safety lock Horizontal clamp 113 is a compact lever clamp intended for fast, repeatable workholding at a fixed 90° mounting angle, featuring a safety locking mechanism for secure operation. Compact lever clamp with safety lock Zinc‑plated corrosion resistance 2,500 N holding force capacity Angle base for 90° mounting Faster, repeatable clamping that keeps production moving The lever‑actuated design provides immediate clamping action while maintaining high repeatability across multiple setups. With a holding force of 2,500 N and a maximum clamping force of 2,300 N, the device delivers measurable performance suitable for light to medium workholding tasks. The M8 x 50 spindle transfers actuation force reliably, reducing setup time compared with screw‑only fixtures. The compact profile of the clamp minimises interference in fixtures and jigs, enabling denser part layouts on assembly stations and reducing cycle times through quicker clamp engagement and release. Built for workshop durability and operator safety A zinc‑plated surface finish protects the clamp against surface corrosion in typical workshop environments and supports long service intervals. The angle base lets the clamp be mounted at a true 90° orientation, which simplifies incorporation into modular fixture plates and welded frames. The integrated safety lock prevents accidental opening under load, improving operator confidence and process safety when parts are being machined or assembled. At only 0.42 kg, the unit is light enough for hand positioning during jig assembly but robust enough to withstand daily use. Practical integration into fixtures and jigs Designed as a lever clamp, the component is suited for repetitive clamping in metalworking and assembly fixtures where quick access and secure holding are required. The lever clamp format allows rapid manual operation or straightforward adaptation to simple mechanical actuation systems. The compact dimensions and standard spindle thread make the clamp straightforward to incorporate into bespoke fixtures or adjustable locating blocks. Clear numerical specifications for force and mounting angle enable planners and buyers to match the clamp to fixture loads and cycle demands without ambiguity. Contact Metav Werkzeuge today to discuss how the Kukamet horizontal clamp with safety lock and 90° angle base can improve fixture reliability; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 113-3-L GTIN: 8680731500899 eClass: 21041719 ETIM: EC011973 Core specifications Holding force (max): 2,500 N Clamping force (max): 2,300 N Angle: 90° Weight: 0.42 kg Spindle: M8 x 50 Materials and features Zinc‑plated finish Angle base mounting Safety locking mechanism Lever clamp design FAQ What maximum holding force does the clamp provide? The Horizontal clamp 113 (Kukamet, SKU 113-3-L) offers a maximum holding force of 2,500 N. How is the clamp mounted in fixtures? Mounting is via an angle base designed for 90° installation; the clamp is supplied for secure bolting to plates or frames. Does the clamp include a safety device to prevent accidental release? Yes, the product from Kukamet incorporates a safety locking mechanism to prevent unintended opening under load. What finish and weight can be expected from the unit? The clamp has a zinc‑plated finish for surface protection and weighs 0.42 kg. What spindle specification is used for force transmission? The clamp uses an M8 x 50 spindle for actuation and force transfer. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp With Solid Arm And Safety Lock, 1,000 N Closing Force - Kukamet
The galvanised design and compact 116 mm arm deliver dependable clamping with rated retention up to 1,200 N and an actuation capacity of 1,000 N, ensuring stable fixturing in light industrial and workshop applications. Order the clamp directly via Metav Werkzeuge or consult the team for specification advice. 111 Horizontal Lever Clamp – Galvanised, 116 mm arm (Kukamet) A 111 horizontal lever clamp designed for secure workholding and repeatable positioning in jigs, fixtures and assembly benches. Galvanised steel construction Massive holding arm with safety lock 116 mm reach for versatile clamping Holds up to 1,200 N retention force Consistent clamping force for reliable production The unit supplies a consistent holding force of up to 1,200 N, with an actuation capacity of 1,000 N, which translates into reliable part retention during machining and assembly operations. The 116 mm arm length provides a practical reach for a wide range of fixturing tasks while occupying minimal bench space. Specified numerical values provide a factual basis for integration in fixtures and enable planners to compare components objectively, supporting efficient process decisions. Robust construction that reduces set-up time A massive holding arm and an integrated safety lock reduce the risk of accidental release and make the clamp suitable for repetitive cycles. The horizontal foot mount aligns the clamp at a fixed 90° angle for secure lateral positioning. The galvanised finish offers enhanced corrosion resistance for workshop environments, while the small mass (0.2 kg) keeps the component easy to handle during assembly. These design choices lower setup time and contribute to sustained production uptime. Compact, service-friendly design for fixtures and jigs The clamp is engineered for quick integration into existing jigs: the horizontal base facilitates stable mounting and simple alignment in modular fixture plates. Low maintenance requirements follow from the galvanised surface and straightforward mechanical locking; routine checks focus on the lock mechanism and pivot points. The compact profile supports dense fixture layouts and is compatible with common workshop tooling standards, making it a pragmatic choice for manufacturers seeking efficient, dependable fixturing components. For specification support or to acquire the Kukamet horizontal lever clamp, contact Metav Werkzeuge — specialist advice and ordering assistance are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 111-2-D-L-C2 GTIN: 8680731500103 Manufacturer: Kukamet Category: Spanner Image: 111-D-L-main.jpg Datasheet: 111-112-113-l-katalogseite.pdf Core specifications Arm length: 116 mm Weight: 0.2 kg Max retention force: 1,200 N Max actuation force: 1,000 N Angle: 90° Features Material: galvanised Mounting: horizontal foot Massive holding arm Safety locking mechanism Story trigger: lever clamp FAQ What clamping forces are specified for this clamp? The Kukamet 111 horizontal lever clamp offers a retention force of up to 1,200 N and an actuation capacity of 1,000 N, suitable for light industrial fixturing. How is the clamp mounted in a fixture? Mounting is via a horizontal foot base; the design fixes the clamp at a 90° angle for lateral workholding and straightforward alignment in jig plates. Is the clamp protected against corrosion? The component is galvanised, which provides a protective zinc layer that increases resistance to rust in workshop and light industrial environments. Does the clamp include a safety mechanism to prevent accidental release? Yes, the clamp features a mechanical safety lock combined with a massive holding arm to reduce the risk of unintended opening during operation. Which SKU should be specified when ordering replacement parts or additional units? Specify SKU 111-2-D-L-C2 and GTIN 8680731500103 when ordering or requesting technical details for this horizontal lever clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp With Solid Arm And Safety Lock, 1200N Hold Force - Kukamet
Thanks to its robust holding arm, compact 116 mm reach and a safety lock, this clamp delivers safe, repeatable workholding under high loads; combine dependable holding force and a vertical mounting to simplify fixture design. Order the (Horizontal clamp 112) directly via (Metav Werkzeuge) or ask our consultants if needed. Horizontal clamp 112 — horizontal toggle clamp with 116 mm arm and safety lock The Horizontal clamp 112 is a compact horizontal toggle clamp designed for stable workholding in fixtures and jigs where predictable clamping force and a secure locking mechanism are required Robust holding arm with safety lock Vertical base for stable mounting Holding force 1,200 N max 116 mm arm, 90° operating angle Secure, repeatable clamping for production fixtures The clamp's robust holding arm and integrated safety lock provide a reliable means of securing components in repetitive operations. The mass of the arm and the positive locking action reduce the risk of unintentional release during handling, which improves process safety and repeatability. Designed for use where a firm, fixed clamping position is required, the device supports consistent part positioning and reduces rework. The blackened finish offers surface protection while keeping the appearance of workshop tooling professional and functional. Clear performance figures for engineering decisions With a maximum holding force of 1,200 N and a maximum push/pull value of 1,000 N, the clamp supports moderate to high clamping loads suitable for jigs in assembly and light machining contexts. An arm length of 116 mm and a 90° operating angle make the unit simple to integrate into fixtures where a perpendicular clamping stroke is needed. These numeric specifications enable straightforward comparisons with alternative clamping elements and support rapid selection for design bills of materials or workholding layouts, reducing downtime during fixture procurement. Simple mounting, durable finish and maintenance advantages The vertical base (upright foot) allows secure attachment to plates or tooling blocks, making the clamp easy to fit into multi-station jigs. The blackened finish provides corrosion resistance and a low-reflective surface suitable for industrial environments. Maintenance is limited to periodic inspection of the locking mechanism and fasteners; the solid construction minimises wear and keeps service intervals long, which lowers lifetime handling costs. For questions about integration into an existing fixture, consult the technical team for quick advice on compatibility and mounting recommendations. For supply and technical advice on Kukamet horizontal clamps, contact Metav Werkzeuge for fast local availability from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm fit and delivery. Technical Data SKU: B112-2-D-L-C2 Model: 112 Manufacturer: Kukamet Facts Arm length: 116 mm Operating angle: 90° Maximum holding force: 1,200 N Maximum actuation (push) force: 1,000 N Weight: 0.2 kg eCl@ss: 21041719 ETIM: EC011973 Special features Vertical base (upright foot) mounting Massively constructed holding arm with safety lock Blackened finish Compact horizontal toggle clamp suitable for fixtures and jigs FAQ What mounting method does this clamp use? The clamp uses a vertical base (upright foot) for stable attachment to fixture plates and tooling blocks. What forces can the clamp handle in typical use? The unit provides a maximum holding force of 1,200 N and a maximum actuation (push) force of 1,000 N, suitable for many assembly and light machining applications. Is the locking mechanism reliable for repeated cycles? Yes, the clamp's massive holding arm and integrated safety lock are designed to provide secure engagement and dependable performance over repeated cycles. Which materials and environments is the clamp suited for? The blackened finish improves surface resistance; the clamp is intended for industrial workshop and fixture environments where a low-reflective, durable tool is preferred. Can this clamp be integrated into custom jigs and fixtures? Yes, the compact 116 mm arm and 90° operating angle make the clamp straightforward to incorporate into bespoke jigs; technical specifications support quick design decisions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp, Massive Holding Arm & Safety Lock, Zinc-Plated, 1,200N Hold - Kukamet
Take advantage of the combination of robust galvanised construction, a massive holding arm with safety lock, and compact dimensions for reliable fixture clamping; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal toggle clamp 112 — galvanised steel, 116 mm arm (Kukamet) The Horizontal toggle clamp 112 is a compact lever clamp for workshop jigs and fixture applications, designed for secure, repeatable clamping at a 90° angle. Horizontal toggle clamp »112« by Kukamet Massive holding arm with safety lock 116 mm arm for secure workpiece access Vertical foot mounting, 90° clamping angle Durable clamp performance that keeps production moving The horizontal toggle clamp 112 combines a galvanised steel construction with a massive holding arm and integrated safety lock, providing a secure means of holding workpieces during machining, assembly or inspection operations. The specified figures — 1200 N holding force and 1000 N clamping force — indicate the clamp’s capacity to resist movement under load; holding force refers to the maximum sustained retention, while clamping force denotes the pressure applied to the workpiece. These metrics translate into fewer repositioning steps on the production line and more consistent processing quality, supporting efficient throughput and predictable fixture behaviour. Compact layout that simplifies fixture design Engineered for confined workstations, the clamp’s 116 mm arm and vertical foot mounting enable flexible placement on plates and jigs without consuming excessive space. The 90° clamping angle creates a reliable right-angle lock that is easy to integrate in modular fixtures and assembly benches. At approximately 0.2 kg, the unit is light enough for compact nests yet substantial in feel, allowing designers to position multiple clamps in close proximity for even clamping pressure distribution. This compactness helps reduce cycle times and keeps fixture stacks lower, aiding accessibility for operators and robots alike. Safe handling and maintenance for daily workshop use The clamp’s safety lock secures the lever in the closed position, preventing accidental release during handling or transport of assemblies. Galvanised finish offers corrosion resistance, reducing the need for frequent surface treatment in humid or workshop environments and extending service intervals. The simple lever mechanics are suited to repetitive use and straightforward inspection routines; periodic lubrication of the pivot points and a visual check of the lock mechanism are usually sufficient to maintain dependable function. The robust design supports long service life under normal workshop conditions. Practical applications and integration notes Ideal for small-series production, testing rigs and manual assembly stations, this horizontal clamp performs consistently where repeatable positioning and quick clamping cycles are required. Typical tasks include holding parts for drilling, welding fixtures, inspection fixturing and press operations where a secure, right-angle clamp is required. The clamp mounts via a vertical foot, which simplifies attachment to fixture plates or welded frames. For bespoke fixtures or large-scale automation, integration advice is available to ensure correct spacing, force distribution and actuator compatibility. Contact Metav Werkzeuge for application guidance and prompt supply from our Emmerich warehouse — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 112-2-D-L-C2 GTIN: 8680731500455 Brand: Kukamet Material: galvanised steel Mounting: vertical foot Arm length: 116 mm Clamping angle: 90° Weight: 0.2 kg SKU: 112-2-D-L-C2 Facts Holding force max: 1200 N Clamping (press) force max: 1000 N Arm: 116 mm Angle: 90° Weight: 0.2 kg eClass: 21041719 ETIM: EC011973 Special features Massive holding arm Safety locking mechanism Galvanised surface finish Vertical foot for mounting Compact, light design FAQ What mounting method does this clamp use? The clamp is fitted with a vertical foot mounting method suitable for bolting to fixture plates and jigs; the vertical foot is part of the clamp’s standard configuration. What forces can be expected from the clamp in use? The Kukamet horizontal toggle clamp 112 provides up to 1200 N holding force and 1000 N clamping force, figures intended to indicate its retention and applied pressure under normal conditions. Is the clamp suitable for corrosive workshop environments? The unit features a galvanised steel finish that improves resistance to corrosion and reduces the need for frequent surface maintenance in typical workshop settings. Can the clamp be locked to prevent inadvertent release? Yes, the clamp includes a safety lock that secures the lever in the closed position to prevent accidental release during handling or transport. Which applications are appropriate for this type of clamp? Common uses include jigs for drilling and welding, assembly fixtures, inspection plates and other scenarios requiring quick, repeatable right-angle clamping; the clamp suits manual and semi-automatic production processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 116mm Horizontal Clamp, Massive Support Arm, 1 200N Holding Force, Blackened Finish - Kukamet
Benefit from a compact, high‑rigidity clamp with a massive holding arm and reliable holding force up to 1,200 N for repeatable setups; order the Horizontal clamp 111 directly via Metav Werkzeuge or consult our advisors for specification support. Horizontal clamp 111 — horizontal clamping lever with 116 mm arm, Kukamet A robust Horizontal clamp 111 for secure workholding in jigs, fixtures and assembly applications, featuring a horizontal foot and a massive holding arm for stable clamping at a 90° angle. Massive holding arm for high rigidity Horizontal foot for stable mounting Holding force up to 1,200 N Compact weight: 0.23 kg Consistent clamping for repetitive production The lever design delivers a repeatable clamping action that keeps setups stable across production runs. With a holding force of up to 1,200 N and a pressing capacity of 1,000 N, this clamp secures components reliably during machining, testing or assembly. The rigid arm construction reduces deflection, enhancing positional accuracy and minimising rework—an advantage for engineers planning short changeovers or small-batch production. Space‑efficient fixture integration Designed for confined fixtures, the unit’s 116 mm arm and horizontal foot enable compact layout without sacrificing accessibility. The 90° angle supports low‑profile installations where clearance is limited, while the overall compact weight (0.23 kg) reduces load on positioning devices. This combination of dimensions and mass makes the clamp suitable for modular jig systems and lean production cells where footprint and repeatability matter. Durable finish and simple, low‑effort maintenance Finished in a professional blackened coating, the clamp resists corrosion and presents a uniform appearance within workshop environments. The massive holding arm and lever mechanism are engineered for frequent operation, offering longevity under regular use. Maintenance is straightforward: periodic inspection and light lubrication keep the mechanism operating smoothly, preserving clamping performance and uptime in demanding applications. Speak with Metav Werkzeuge in Emmerich for tailored fixture advice and a specification match; contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss supply and integration. Technical data SKU: B111-2-D-C2 GTIN: 8680731506969 Model: 111 Facts Arm length: 116 mm Weight: 0.23 kg Holding force: 1,200 N Pressing force: 1,000 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Massive holding arm Horizontal foot (waagerechter Fuß) Blackened finish Lever clamp design Category: clamp FAQ What maximum holding and pressing forces does the clamp provide? The clamp offers a holding force up to 1,200 N and a pressing force of 1,000 N; the data is specified for the Horizontal clamp 111 (SKU B111-2-D-C2). For which applications is this clamp suitable? The lever clamp is intended for jigs, fixtures and assembly work where stable, repeatable workholding is required; it is commonly used in small‑batch production and assembly benches. How is the clamp mounted in a fixture? Mounting is via the horizontal foot at a 90° orientation; the 116 mm arm provides reach while maintaining a low profile for compact fixture layouts. What material finish does the clamp have and why does it matter? The unit has a blackened finish, offering surface protection and a consistent workshop appearance while helping to reduce corrosion in standard industrial environments. How heavy is the clamp for fixture design considerations? The clamp weighs 0.23 kg and is therefore easy to integrate into modular jigs and lightweight fixture systems without significantly increasing mass. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 117mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc Coated - Kukamet
Rely on galvanised construction, a 117 mm arm and up to 4,500 N clamping force for stable, repeatable fixture work; order the Horizontal clamp 113 directly via Metav Werkzeuge or consult the specialists if technical clarification is required. Horizontal clamp 113 — Galvanised horizontal lever clamp with angled base (Kukamet) The Horizontal clamp 113 is a galvanised horizontal lever clamp designed for secure, repeatable positioning in jigs and fixtures where a 90° hold is required. Galvanised for corrosion resistance Massive holding arm with safety lock 117 mm lever arm for deep reach Up to 4,500 N clamping force Secure clamping performance that reduces rework The Horizontal clamp 113 delivers a measurable improvement in process reliability through its 4,500 N clamping force and 5,000 N holding force, which provide stable restraint during machining and assembly operations. The 117 mm lever ensures access to recessed or awkward positions while maintaining consistent pressure, reducing the likelihood of part movement and subsequent rejects. By translating nominal forces into practical holding capacity, the clamp supports faster cycle times and fewer interruptions in small-batch production and fixture-based processes. Built to last and safe in daily use Durability and operator safety are integral to the design: the galvanised finish resists corrosion in workshop environments, while the massive holding arm and integrated safety lock prevent unintended release during handling. At 1.84 kg the unit combines a robust feel with manageable mass for fixture assembly and service. The construction minimises maintenance requirements and extends service intervals, contributing to lower lifetime resource consumption and more predictable plant availability. Simple integration into jigs, fixtures and assembly stations With an angled base designed for 90° mounting, the clamp fits standard fixture plates and can be incorporated into purpose-built jigs or modular tooling systems. The lever mechanism provides rapid clamping and unclamping, supporting high-repeatability setups and hand-operated assembly tasks. For projects that demand straightforward retrofitting, the clamp’s compact footprint and deep reach make it a practical choice for toolroom jigs, welding fixtures and manual assembly lines; if specifications need tailoring, Metav Werkzeuge can advise on compatibility and layout. Contact Metav Werkzeuge for tailored advice and availability — Metav Werkzeuge supplies from Emmerich and can confirm suitability for production applications Technical Data Article number: 113-5-D-L-C1 GTIN: 8680731501049 ECLASS: 21041719 ETIM: EC011973 Facts Clamping force (max): 4,500 N Holding force (max): 5,000 N Lever arm length: 117 mm Weight: 1.84 kg Angle: 90° Special features Material: galvanised Mounting: angled base Massive holding arm Safety lock Category: Spanner Manufacturer: Kukamet FAQ What clamping and holding forces does the clamp deliver? The clamp provides a maximum clamping force of 4,500 N and a maximum holding force of 5,000 N, as stated for the Horizontal clamp 113. Which materials and environments suit this clamp? The Horizontal clamp 113 is galvanised, making it suitable for general workshop environments where corrosion resistance is required; it is intended for fixture and jig applications rather than corrosive process baths. How is the clamp mounted in a fixture? Mounting is via an angled base designed for 90° installation, enabling integration into plates and jigs where a horizontal lever action is needed. What is the lever reach and unit weight? The lever arm length is 117 mm and the unit weighs 1.84 kg, offering a balance between reach and manageable mass for fixture assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 117mm Horizontal Clamp With Massive Holding Arm, 5 000N Holding Force - Kukamet
Take advantage of a robust combination of secure holding and corrosion resistance for consistent clamping in jigs and fixtures. The galvanised finish and massive holding arm support a reliable 5,000 N holding capacity while the compact 117 mm arm and 90° mounting keep workflows efficient and space-saving. Order the clamp directly via Metav Werkzeuge or consult our advisors for selection guidance. Horizontal clamp 113 — 90° angle-foot clamp, galvanised, Kukamet The Horizontal clamp 113 is a 90° angle-mounted clamping device for secure workpiece retention in production jigs, fixture plates and assembly rigs Massive holding arm for increased rigidity Galvanised finish for corrosion protection 90° angle foot for space-saving mounting Holding force 5,000 N for robust clamping Stable clamping where precision matters The 113 model delivers a significantly higher retention capacity compared with light-duty fixtures, using a massive holding arm that resists deflection under load. With a rated holding force of 5,000 N and a maximum pressing force of 4,500 N, the clamp reduces rework and downtime by keeping components immobile during machining or assembly. Stated forces refer to static holding and pressing values and provide a clear basis for fixture design and process planning. Built for workshop durability and quick installation A galvanised finish gives extended corrosion resistance in workshop environments, lowering maintenance cycles and preserving contact geometry. The 90° angle foot mounting simplifies integration into fixture plates and T-slot tooling, while the 117 mm arm length provides clearance for many workpiece contours without increasing the overall footprint. These attributes combine to offer low-maintenance durability and straightforward mechanical fitment in repetitive production tasks. Compact weight and consistent handling for repetitive tasks Weighing 1.705 kg, the clamp balances solidity with manoeuvrability during fixture assembly and repositioning. The compact construction supports efficient storage and reduced handling effort in dynamic work environments. Designed for repetitive clamping operations, this unit is suitable for small to medium-sized jigs where stable, repeatable holding is required and space is at a premium. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontal clamp 113 into your fixtures and benefit from local stock and expert selection at Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 113-5-D-C1 GTIN: 8680731501018 Manufacturer: Kukamet Facts Arm length: 117 mm Weight: 1.705 kg Holding force max: 5000 N Pressing force max: 4500 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Mounting: angle foot Material: galvanised Massive holding arm Category: Spanner SKU: 113-5-D-C1 FAQ What materials is the clamp suitable for? The Kukamet Horizontal clamp 113 is a general-purpose fixture clamp; material compatibility depends on the overall fixture design rather than the clamp alone. How is the clamp mounted to fixture plates? Mounting is via the 90° angle foot; the design is intended for integration into plates, T-slots or welded brackets in jigs and assembly fixtures. What is the difference between holding force and pressing force? Holding force (5,000 N for this clamp) refers to the maximum retention capacity; pressing force (4,500 N) denotes the maximum load the clamping action can apply during engagement. Is the surface treatment suitable for humid environments? The galvanised finish provides enhanced corrosion resistance compared with bare steel, making the clamp suitable for typical workshop and light industrial conditions. Can the clamp be used in automated fixtures? Yes, the robust construction and consistent clamping values make the model appropriate for mechanical fixtures and automated jigs where repeatability is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 118mm Horizontal Clamp Massive Holding Arm, 2.5kN Clamping Force, Blackened Steel - Kukamet
Take advantage of a compact, lever-operated horizontal clamp that combines a massive holding arm, a 118 mm reach and a rated holding force of 2,500 N for reliable fixture work; order directly via Metav Werkzeuge or consult our product specialists for application support. 112 horizontal clamp — Kukamet, 118 mm arm, 2,500 N holding force A 112 horizontal clamp designed for fast, repeatable clamping in jigs, fixtures and assembly stations Massive holding arm for stable clamping 118 mm arm length Max holding force 2,500 N Vertical mounting foot for secure installation Consistent clamping for repetitive production The lever-action horizontal clamp delivers a repeatable holding force that simplifies fixture design and reduces cycle variability. With a maximum holding force of 2,500 N and an indicated pressing capacity of 2,300 N, the device secures workpieces reliably during machining, welding or inspection operations. The clearly specified forces allow engineers to calculate clamping loads and safety margins, ensuring process stability. The compact footprint and lever mechanism create a quick mechanical lock that eliminates the need for complex pneumatic systems while maintaining consistent part positioning. Built for workshop durability and precise positioning Constructed with a massive holding arm and finished in a blackened surface, the clamp resists wear and provides long service life in demanding environments. The 118 mm arm length offers practical reach for a wide range of panel thicknesses and tooling arrangements, while the 90° clamping angle supports low-profile fixtures. The robust build reduces deflection under load, which benefits tolerance-critical operations where small shifts can lead to scrap or rework. All components are designed to deliver mechanical stability and predictable behaviour across repeated cycles. Rapid installation and straightforward integration The clamp is supplied with a vertical mounting foot, enabling secure attachment to plates and fixture bases without additional adapters. The compact weight of 0.326 kg makes it simple to position and fasten, while the lever mechanism supports quick manual actuation for assembly-line workstations or hand-operated benches. Specified as a horizontal, lever-operated workholding device, this unit is suitable for retrofitting into existing jigs or for new fixture designs where space is limited and repeatability is essential. The straightforward mechanical concept reduces maintenance requirements and simplifies training for shop personnel. Contact Metav Werkzeuge today for advice on integrating the Kukamet 112 horizontal clamp into production or for availability details — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B112-3-D-C2 GTIN: 8680731507249 Model: 112 Category: Clamp / Spanner Facts Arm length: 118 mm Clamping angle: 90° Max pressing force: 2,300 N Max holding force: 2,500 N Weight: 0.326 kg Materials and special features Material / finish: blackened (Schwarz brüniert) Mounting: vertical foot (senkrechter Fuß) Design: horizontal, lever-operated clamp Feature: massive holding arm FAQ What industries are suitable for this horizontal clamp? The Kukamet 112 horizontal clamp is suitable for general workshop, assembly and light machining environments where lever-operated, repeatable clamping is required; it is commonly used in fixtures on production lines and jigs. What clamping force can be expected in practice? Rated holding force for the 112 horizontal clamp is 2,500 N; this value describes the maximum static holding capacity under correct installation and is useful for calculating fixture safety margins. How is the clamp mounted to a fixture plate? Mounting is performed via the supplied vertical foot; the design allows secure fastening to base plates or fixture blocks for compact, low-profile installation. Is the finish corrosion-resistant for shop use? The clamp has a blackened finish (Schwarz brüniert) that reduces surface wear and offers basic protection for typical workshop conditions; additional surface protection can be applied if required for aggressive environments. Which SKU should be ordered for this model? Order the clamp under SKU B112-3-D-C2 (Kukamet 112 horizontal clamp) for the specified configuration and documented holding force. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 118mm Horizontal Clamp With Massive Arm, Safety Lock, 2.3kN Closing Force - Kukamet
Take advantage of the combination of a heavy‑duty holding arm, galvanised corrosion protection and a 2,300 N clamping capacity for reliable, repeatable fixture work; order the clamp directly from Metav Werkzeuge or consult our team for application advice. Horizontal Toggle Clamp 111 — horizontal clamp with 118 mm arm, galvanised finish (Kukamet) A Horizontal Toggle Clamp 111 engineered for secure horizontal clamping in jigs and fixtures, featuring a robust holding arm and a positive safety locking mechanism. Heavy-duty holding arm Safety locking mechanism Galvanised corrosion protection 118 mm arm length Up to 2,300 N clamping capacity Secure and consistent clamping for serial production The clamp delivers a defined clamping force of 2,300 N and a maximum holding force of 2,500 N, providing measurable performance for repeatable assembly and machining tasks. These figures describe the force applied during engagement and the static retention capacity respectively; both values support predictable fixture behaviour and reduce variation in process set‑ups. For production environments where cycle stability matters, the measurable force characteristics assist process control and shorten set‑up validation. Durable construction for long service life Constructed from galvanised components and fitted with a heavy‑duty holding arm, the design prioritises durability and corrosion resistance. The integrated safety lock secures the clamp in engaged position, preventing inadvertent release during handling or vibration. This combination reduces downtime caused by component replacement and supports a safer workplace where clamps remain reliably locked under load. Compact mounting and straightforward integration Fitted with a horizontal foot for direct base mounting and an 118 mm arm, the clamp integrates easily into compact jigs and fixture plates. At 0.3 kg it adds very little mass to assemblies while offering strong clamping performance, which simplifies retrofitting into existing tooling. The right‑angled (90°) actuation suits side‑loaded arrangements and saves bench space, enabling efficient layout in small to medium workshops. Confidence through traceable quality and supply Supplied by a trusted partner in the industrial market, the clamp benefits from Metav’s emphasis on accessible precision and consistent availability. Metav’s established logistics and quality filtering for the European market means reliable stock and documented product characteristics, supporting procurement certainty and lean supply chains. This creates peace of mind where tool reliability and supplier transparency are valued. Contact Metav Werkzeuge for technical selection of the Kukamet Horizontal Toggle Clamp 111 (SKU 111-3-D-L-C2) or for advice on integrating the unit into existing jigs — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 111-3-D-L-C2 Manufacturer: Kukamet GTIN: 8680731500189 Facts Arm length: 118 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Angle: 90° Weight: 0.3 kg Special features Mounting: horizontal foot Material: galvanised Heavy‑duty holding arm Safety locking mechanism Compact design for jigs and fixtures FAQ What maximum clamping force does the clamp provide? The Kukamet Horizontal Toggle Clamp 111 offers a clamping capacity of 2,300 N and a holding force of 2,500 N (SKU 111-3-D-L-C2). Is the clamp suitable for workshop jigs exposed to humidity? Yes, the galvanised finish on the Horizontal Toggle Clamp 111 provides corrosion resistance suitable for typical workshop environments. How is the clamp mounted in a fixture? The unit uses a horizontal foot for base mounting, allowing direct attachment to plates and fixture boards for secure positioning. Can the clamp remain locked under vibration or handling? The incorporated safety locking mechanism secures the clamp in engaged position to reduce the risk of accidental release during vibration or handling. What are typical applications for this clamp? The clamp is designed for jigs, fixtures and assembly tooling where defined, repeatable horizontal clamping is required; consult Metav Werkzeuge for integration guidance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 118mm Horizontal Clamp With Solid Holding Arm And Safety Lock, 2.3kN Push Force, Galvanised - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines a massive holding arm, a reliable safety lock and measurable clamping power for consistent workholding. Benefit from straightforward integration into existing jigs and fixtures and order via Metav Werkzeuge or consult their technical advisors for application support. Kukamet Horizontal clamp 112 — zinc-plated horizontal clamp with safety lock The Horizontal clamp 112 is a compact horizontal clamping device with a vertical foot, intended for fixture and workholding tasks in workshops and light production environments. Massive holding arm with safety lock Zinc-plated for corrosion resistance 118 mm arm length for secure clamping Up to 2,500 N holding force Consistent clamping power for reliable fixtures The clamp delivers clearly defined force values, with a clamping force of 2,300 N and a holding force up to 2,500 N, which supports repeatable fixture results and reduces the need for constant retightening. These figures indicate the clamp’s capacity to resist displacement under load, making it suitable for assembly jigs, portable fixtures and repetitive positioning tasks. The numeric ratings provide an objective basis for selecting the correct device for common workshop applications. Robust construction to cut maintenance intervals A massive holding arm combined with a safety lock increases operational safety and minimizes accidental release during handling. The body is zinc-plated, offering corrosion resistance that prolongs service life in humid or mildly abrasive environments. The product’s compact design and sturdy components mean fewer service interventions and steady performance over many cycles, which contributes to predictable production throughput and lower total cost of ownership. Easy installation into existing setups with a vertical foot The clamp features a vertical foot mounting arrangement and a 118 mm arm, enabling straightforward retrofitting into existing jigs and tooling plates without extensive redesign. The 90° clamping angle provides secure lateral restraint where space is limited. Lightweight yet stable at approximately 0.3 kg, the device balances portability and rigidity, allowing flexible positioning across multiple fixtures while keeping system deadweight low. For practical clamping reliability choose the Kukamet 112 horizontal clamp and contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 112-3-D-L-C2 GTIN: 8680731500530 Material: zinc-plated Mounting: vertical foot Angle: 90° Facts Arm length: 118 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Weight: 0.3 kg Special features Massive holding arm Safety lock Compact horizontal clamp design Category: clamp / spanner FAQ What clamping and holding forces does this clamp provide? The Kukamet Horizontal clamp 112 offers a clamping force of 2,300 N and a holding force of up to 2,500 N (SKU 112-3-D-L-C2), providing measurable performance for light to medium-duty fixtures. Can the clamp be mounted on standard fixture plates? Yes, the device uses a vertical foot mounting arrangement and a compact footprint that permits installation on common jigs and tooling plates without major modifications. Is the clamp suitable for use in humid or mildly corrosive environments? The zinc-plated finish provides corrosion resistance, so the clamp is appropriate for workshop conditions where increased surface protection is beneficial. How does the safety lock improve operation? The integrated safety lock prevents unintended release of the clamping arm during handling or vibration, enhancing operational safety and ensuring stable clamping in repetitive processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com