Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° 118mm Horizontal Clamp With Solid Holding Arm, 2.5 kN Holding Force, Zinc Plated - Kukamet
Compact, galvanised construction and a massive holding arm ensure sustained reliability and repeatable clamping with up to 2,300 N of applied force; the unit’s horizontal foot mounting makes it suitable for fixed jigs and fixtures. Order the Horizontalspanner 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontalspanner 111 — Horizontal clamp with 118 mm arm and galvanised finish by Kukamet The Horizontalspanner 111 is a robust horizontal clamp designed for secure workpiece fixation in machining, assembly and jig applications. Galvanised steel construction for corrosion resistance Massive 118 mm holding arm for secure clamping 2,300 N clamping force; 2,500 N holding capacity Durable construction for long service life The clamp’s galvanised steel body and reinforced components deliver corrosion resistance and low maintenance, which supports continuous workshop use. The massive holding arm provides rigidity where movement must be avoided during machining; this reduces rework and extends tool life. Designed for repeatable positioning, the construction balances solidity with manageable mass to keep fixtures straightforward to handle. Secure clamping that speeds production Engineered to produce up to 2,300 N of clamping force with a 2,500 N holding capacity, the device separates applied clamping force from holding capacity to ensure safety margins during operation. Clamping force refers to the force applied when the lever is engaged; holding capacity denotes sustained retention under load. The result is a measurable improvement in workpiece stability and a reduction in setup checks, supporting faster cycle times and more consistent quality. Simple mounting and adaptable use in fixtures Equipped with horizontal foot mounting and set at a 90° operating angle, the clamp integrates with standard fixture plates and jigs without complex adapters. The 118 mm arm reach offers access to workpieces while the 0.328 kg mass keeps the component compact and easy to position within confined assemblies. The lever-clamp mechanism gives an intuitive actuation method suitable for repetitive tasks on production benches and assembly lines. Contact Metav Werkzeuge for tailored supply of the Kukamet Horizontalspanner 111 and technical advice from the Emmerich team Technical data Article number: 111-3-D-C2 GTIN: 8680731500158 Brand: Kukamet Model: 111 Category: Spanner Facts Arm length: 118 mm Clamping force (max): 2,300 N Holding capacity (max): 2,500 N Weight: 0.328 kg Angle: 90° Special features Material: galvanised steel Mounting: horizontal foot mounting Massive holding arm Lever clamp design Compact, lightweight construction FAQ What is the maximum clamping force of this horizontal clamp? The Kukamet Horizontalspanner 111 delivers a maximum clamping force of 2,300 N and a holding capacity rated at 2,500 N. How long is the clamping arm and what does that mean for fixture design? The arm length is 118 mm, which provides adequate reach for many jigs and fixtures while keeping the clamping footprint compact for tight assemblies. Which mounting method does the clamp use? The device features a horizontal foot mounting, allowing direct attachment to fixture plates and base plates at a 90° orientation. What material is the clamp made from and how does this affect maintenance? The clamp is made from galvanised steel; this finish improves corrosion resistance and reduces routine maintenance in workshop environments. Is the Horizontalspanner 111 suitable for repetitive production use? Yes, the lever-clamp design and robust holding arm make the Horizontalspanner 111 well suited to repetitive clamping tasks in production and assembly contexts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Horizontal Clamp, M6x40 Spindle, Blackened Finish - Kukamet
Take advantage of a compact, right‑angle design combined with a 1,200 N holding force and a 1,000 N operating force to secure fixtures reliably while keeping setup time low. Order the clamp directly via Metav Werkzeuge or contact the consultants for specification matching and delivery options. Horizontalspanner 113 — Horizontal clamp with angled base, 90° lever design (Kukamet) The Horizontalspanner 113 is a compact horizontal clamp designed for right‑angle fixtures and repeatable clamping tasks in jigs and workholding systems. Compact horizontal clamp with angled base Holding force up to 1,200 N Operating force up to 1,000 N M6x40 pressure spindle for fine adjustment Secure right‑angle clamping for reliable production The lever clamp delivers a dependable right‑angle solution where repeatability matters. With a holding force of 1,200 N and an operating force of 1,000 N, the device secures workpieces during machining, assembly and inspection operations, reducing the risk of movement under load. The integrated M6x40 pressure spindle enables precise contact pressure and compensates for minor height differences, so fixtures remain consistent part after part. This combination of repeatable clamping and fine adjustment supports a steady production flow and shorter cycle times. Space‑saving, low‑mass design that eases fixture planning Engineered with a compact footprint and a weight of 0.27 kg, the clamp keeps added mass on moving fixtures to a minimum and facilitates retrofitting into tight jigs. The angled base (Winkelfuß) allows mounting at a 90° orientation without complex adapter plates, simplifying fixture design and lowering tooling costs. A blackened finish provides basic surface protection and a professional appearance suitable for busy shop floors, while the lever mechanism offers quick engagement and disengagement for efficient handling. Practical benefits for everyday workshop use The clamp is suited to repetitive clamping tasks in small series and prototyping environments where robust, predictable behaviour is required. The straightforward construction and defined clamping geometry make set‑up intuitive for technicians and engineers, helping to avoid trial‑and‑error adjustments. Supplied as a compact unit with the M6x40 pressure spindle, the model identified as B113-2 is easy to integrate into existing fixture plates or modular tooling systems and supports consistent part quality across runs. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal clamp B113-2 into fixtures, or request a quotation via +49 2822 7131930 / info@metav-werkzeuge.com Technical Data SKU: B113-2 GTIN: 8680731507393 Weight: 0.27 kg Material: blackened finish Mounting: angled base (Winkelfuß) Angle: 90° Pressure spindle: M6x40 Max holding force: 1,200 N Max operating force: 1,000 N Manufacturer: Kukamet Core technical data Article class: 21041719 (eClass) ETIM: EC011973 Special features Lever clamp design (hebelspanner) Compact footprint for tight fixtures Fine adjustment via pressure spindle Lightweight for minimal added mass FAQ What is the maximum holding force of this clamp? The Kukamet Horizontalspanner 113 (SKU B113-2) provides a maximum holding force of 1,200 N, suited to many light‑to‑medium fixture tasks. How is the clamp mounted in a fixture? Mounting is via an angled base (Winkelfuß) designed for 90° orientation, enabling direct installation in right‑angle jigs and tooling setups. Which pressure spindle is included and what does it do? The clamp includes an M6x40 pressure spindle that allows fine adjustment of contact pressure and compensation for small height variances in the workpiece. Is the clamp suitable for retrofitting existing plates? Yes, the compact design and standard fixing approach make the clamp convenient for retrofitting into existing fixture plates and modular tooling systems. Who supplies this product and where can specifications be confirmed? The clamp is supplied under Kukamet; for detailed specifications or integration advice, Metav Werkzeuge can provide technical guidance and order handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Massive Holding Arm, Zinc Plated - Kukamet
Robust vertical mounting, galvanised corrosion resistance and repeatable clamping force ensure dependable fixture performance; order the Pneumatic clamp 652 directly via Metav Werkzeuge or request integration advice from our consultants. Pneumatic clamp 652 — Vertical-foot pneumatic lever clamp with 62 mm arm by Kukamet The Pneumatic clamp 652 is a compact, vertical-foot pneumatic lever clamp designed for repetitive clamping in production fixtures and workshop jigs. Vertical base for stable mounting 62 mm robust holding arm Up to 1,400 N holding force Galvanised construction resists corrosion Consistent clamping for production workflows The 652 model delivers a dependable, repeatable hold designed for short cycle production and fixture use. The vertical foot keeps the footprint compact while permitting secure attachment to benches or plates. The 62 mm arm provides sufficient reach for common workpieces without compromising rigidity, and the massive holding arm reduces deflection during clamping. This combination supports stable cycle times and reduces rework by keeping parts accurately positioned throughout machining or assembly operations. Engineered force and wear resistance Designed with industrial duty in mind, the clamp provides a max. clamping force of 1,200 N and a max. holding force of 1,400 N, values that allow reliable fixation of medium-sized components. The body is galvanised, offering corrosion protection that extends service life in workshop environments. The pneumatic actuation reduces operator effort and enables consistent force application, which improves process reliability compared with manual toggles and helps maintain quality across repeated cycles. Simple integration into fixtures and tooling Mounting is performed via the vertical base, which simplifies alignment in modular fixturing systems and saves space on the tooling plate. The 90° lever orientation supports common clamping geometries and streamlines actuation paths in automated setups. The compact design and standard interface make the clamp suitable for retrofit into existing jigs or as part of new fixture concepts, supporting fast commissioning and predictable performance in serial production. Practical benefits for workshop and industrial use By combining a robust arm, clear force ratings and a galvanised finish, this clamp reduces downtime related to part slippage and corrosion-related maintenance. The pneumatic actuation contributes to ergonomic operation and consistent outcomes across shifts. For procurement strategies that favour long service intervals and predictable fixture behaviour, the 652 offers a balance of durability and straightforward installation that supports efficient production logistics. Contact Metav Werkzeuge for project-specific advice on integrating the Kukamet 652 into fixturing systems and to request item SKU 652-2-D-C1 for delivery and scheduling Technical data Article number: 652-2-D-C1 Product name: Pneumatic clamp 652 Manufacturer: Kukamet Core technical data Arm length: 62 mm Max. clamping force: 1,200 N Max. holding force: 1,400 N Angle: 90° eCl@ss: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: vertical foot Massive holding arm Application: lever clamp Mass-produced part suitable for fixtures FAQ What clamping forces can be expected from this clamp? The Kukamet Pneumatic clamp 652 delivers a maximum clamping force of 1,200 N and a holding force up to 1,400 N, offering stable fixation for typical workshop components. How is the clamp mounted to a fixture plate? Mounting is performed via the vertical foot arrangement; the vertical base ensures a compact attachment and simple alignment in modular fixtures. Is the surface treatment suitable for workshop environments? Yes, the body is galvanised, giving corrosion resistance that prolongs service life under standard workshop conditions. Can the clamp be used in automated cycle applications? The pneumatic actuation and repeatable lever geometry make the 652 model suitable for automated or semi-automated production where consistent clamping cycles are required. Which SKU should be ordered for this configuration? Order item SKU 652-2-D-C1 for the described configuration of the Kukamet Pneumatic clamp 652. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Massive Holding Arm, Zinc-Plated, Vertical Base - Kukamet
Robust clamping with a 112 mm holding arm and a galvanised finish delivers dependable performance; the vertical-foot, 90° pneumatic design provides up to 1,400 N holding force while the actuator generates 1,200 N of operating force. Order the clamp directly via Metav Werkzeuge or consult our advisors for application support. Pneumatic clamp 652 — vertical-foot, galvanised lever clamp with 1,400 N holding force (Kukamet) A Pneumatic clamp 652 designed for 90° fixtures, combining a massive holding arm with vertical-foot mounting for secure, repeatable clamping in production and jig assemblies. Robust 112 mm holding arm Galvanised corrosion-resistant finish Vertical-foot mounting at 90° angle Up to 1,400 N holding force Consistent clamping where it matters The clamp is built for repetitive, industrial use: a massive holding arm and a 112 mm reach reduce deflection under load, maintaining part position through machining or assembly operations. The galvanised surface protects against humidity and oil while preserving sliding surfaces, so the fixture requires less frequent replacement. This construction supports stable process capability and reduces scrap rates in continuous production environments. Efficient force transmission for faster cycles An air-operated lever clamp converts the actuator's power into a reliable clamping force: the actuator delivers a 1,200 N actuating force, translated by the mechanism to a 1,400 N holding force, which secures components without excessive overpressure. The simple force relationship allows predictable set-up for cycle planning and tooling design, improving throughput while keeping energy consumption moderate compared with oversized pneumatic systems. Simple integration into existing fixtures Designed for vertical-foot mounting at a 90° orientation, the clamp fits common jig plates and fixture blocks without complex adaptors. The compact mounting footprint helps when space is limited and supports consistent repeatability across multiple stations. The lever-style actuation is compatible with standard pneumatic controls, enabling straightforward retrofits and reducing engineering time during line changes. Durable design and low-maintenance operation The galvanised finish and robust mechanical parts mean a long service life under normal workshop conditions, lowering total cost of ownership through reduced downtime. The massive arm and straightforward construction simplify inspection and maintenance tasks, allowing planned lubrication and wear checks rather than frequent unexpected repairs. For workshops and production lines seeking reliability, this clamp delivers predictable performance over many cycles while supporting compliance with industrial process requirements. Contact Metav Werkzeuge today to specify the Kukamet Pneumatic Clamp 652 for your fixture or request technical advice from our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 652-2-D-C2 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Arm length: 112 mm Angle: 90° Max actuating force: 1,200 N Max holding force: 1,400 N Special features Galvanised finish Vertical-foot mounting Massive holding arm Lever-style pneumatic clamp Category: Spanner FAQ What is the maximum holding force of this clamp? The pneumatic clamp 652 provides a maximum holding force of 1,400 N, derived from a 1,200 N actuator and the mechanism’s leverage. How is the clamp mounted in a fixture? Mounting is via a vertical foot at a 90° angle; the Kukamet clamp 652 is made for direct installation on jig plates and fixture blocks. Is the finish suitable for humid or oily workshop environments? Yes, the galvanised surface on the Pneumatic clamp 652 resists corrosion and extends service life in typical workshop conditions. Can this clamp be used for automated production lines? The lever-style, air-operated design of the Kukamet Pneumatic clamp 652 is compatible with standard pneumatic control systems and suits automated or semi-automated stations. What makes this clamp low maintenance? A robust arm and simple mechanical layout reduce wear points; the galvanised finish and accessible mounting lower the frequency of preventive maintenance for the clamp. Manufacturer: Kukamet Fevzi Çakmak Mah. 10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Vertical Base, Massive Holding Arm, Galvanised - Kukamet
Take advantage of a robust, galvanised clamp that combines high holding capacity with a compact arm for dependable fixturing in production. Order the Pneumatic clamp 651 via Metav Werkzeuge or consult the Metav team for integration advice. Pneumatic clamp 651 – Vertical-foot mounting with 1,400 N holding force (Kukamet) The Pneumatic clamp 651 is a 90° lever-style pneumatic clamp designed for secure, repeatable workholding in workshop fixtures and production jigs. Galvanised steel construction 1,400 N maximum holding force 162 mm solid holding arm Vertical-foot mounting, 90° clamping angle Consistent clamping for series production The pneumatic actuation of this lever-style clamping unit delivers a reproducible closing action with an actuation force of 1,200 N and a sustained holding force of 1,400 N, enabling consistent part location across repetitive cycles. This predictability reduces rework and scrap by maintaining clamping pressure within narrow tolerances, which is particularly beneficial in medium- to high-volume machining or assembly operations. The driven mechanism is suitable for integration into automated sequences where cycle stability and repeatability are priorities. Rigid build for vibration-free machining Constructed from galvanised material and fitted with a solid holding arm of 162 mm, the clamp provides mechanical stiffness that resists movement during cutting or pressing processes. The 90° clamping orientation and vertical-foot mounting create a compact footprint while ensuring the clamp’s reaction forces are reliably transferred into the fixture or machine table. For customers requiring firm anchorage during demanding operations, the robust arm and mounting arrangement lower the risk of component shift and improve surface finish quality. Designed for straightforward fixture integration The lever-style pneumatic design simplifies installation into existing tooling setups: the vertical-foot base allows direct attachment to fixture plates or machine beds without complex adapters, while the pneumatic supply provides rapid, low-effort actuation. The unit’s mechanical layout supports short cycle times and reduced manual handling in assembly or welding stations. Specification-conscious buyers will appreciate the clear force ratings and compact arm length, which aid in positioning the clamp where it supports both accessibility and effective part restraint. Durable, low-maintenance performance A galvanised finish offers corrosion resistance that prolongs service life in workshop environments. Pneumatic operation minimises wear-prone mechanical actuation components, translating into fewer maintenance intervals and lower lifecycle disruption. The solid construction and clear force ratings simplify preventative maintenance planning and spare-parts management, supporting long-term uptime and reliable supply to production lines. For operations focused on steady throughput, the combination of durability and simple pneumatic control promotes operational continuity. Discuss integration and procurement with Metav Werkzeuge to secure the Kukamet Pneumatic clamp 651 for reliable, repeatable fixturing in production; Metav’s specialists can advise on mounting and system compatibility. Technical Data Article number: 651-2-D-C3 Manufacturer: Kukamet Product name: Pneumatic clamp 651 Facts Arm length: 162 mm Actuation (max) force: 1,200 N Holding force (max): 1,400 N Clamping angle: 90° Special features Material: galvanised Mounting: vertical-foot Solid holding arm Lever-style pneumatic clamp eClass: 21021004 ETIM: EC011973 FAQ What clamping forces can be expected from this clamp? The Kukamet Pneumatic clamp 651 provides an actuation force of 1,200 N and a maximum holding force of 1,400 N, suitable for a range of medium-duty fixturing tasks. Is the clamp suitable for integration into automated fixtures? Yes, the lever-style pneumatic actuation of the 651 is intended for easy integration into automated jigs and production lines where repeatable, fast clamping is required. How is the clamp mounted to a fixture or machine table? The unit uses a vertical-foot mounting arrangement that allows direct bolting to fixture plates or machine beds for a compact, stable installation. What material is used and how does it affect durability? The clamp is galvanised, which offers corrosion resistance and contributes to a longer service life under typical workshop conditions. Which model and SKU should be ordered for this specification? Order the Kukamet Pneumatic clamp 651, SKU 651-2-D-C3, for the specified arm length and force ratings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp With Vertical Handle And Heavy-Duty Arm, Galvanised - Kukamet
Benefit from the combination of 1,200 N actuation force, galvanised durability and a 112 mm solid holding arm for dependable fixture performance; order the Kukamet 651 pneumatic clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet 651 Pneumatic clamp — vertical-handle design, 112 mm holding arm The 651 is a pneumatic clamping unit for production fixtures and workshop jigs, engineered for vertical-foot mounting and reliable, repeatable clamping in assembly and machining applications Galvanised construction for durable use Vertical handle and solid holding arm 1,200 N actuation force, 1,400 N holding force Vertical-foot mounting at 90° for compact fixtures Secure clamping that keeps production moving The pneumatic clamping unit delivers 1,200 N actuation force and a maximum 1,400 N holding force, providing secure workholding for repeatable operations. High clamping and holding figures translate into reduced slippage and fewer reworks, which supports consistent cycle times and better overall equipment effectiveness. Where repeatability and fixture stability are critical, the robust force ratings ensure components remain stationary during machining, assembly or inspection. Robust materials and construction for low maintenance Constructed from galvanised steel with a massive holding arm, the device is designed to resist corrosion and mechanical wear in industrial environments. The substantial 112 mm arm length increases leverage and contact area while reducing flex under load. This combination of materials and geometry reduces maintenance intervals and prolongs service life, lowering total cost of ownership through fewer replacements and less unplanned downtime. Space-saving mounting for compact fixture design The 90° orientation and vertical-foot mounting allow the clamp to be integrated into tight jigs and tooling plates without compromising accessibility or component clearance. The vertical handle orientation keeps the actuator clear of the work envelope, enabling denser fixture layouts and simpler part loading. This makes the clamping unit suitable for both manual and automated handling stations where floor space and fixture real estate are at a premium. Pneumatic actuation for fast, repeatable cycles and safe operation Pneumatic actuation provides repeatable cycles with rapid response, making the unit suitable for high-throughput environments. The vertical handle and solid arm geometry aid safe interaction during loading and unloading, while the pneumatic drive reduces operator effort compared with manual lever clamps. For customers seeking consistent cycle rates and reliable clamping across batch production, the Kukamet 651 represents a practical balance of durability and operational speed. Contact Metav Werkzeuge for specification support and ordering of the Kukamet 651 pneumatic clamp — call +49 2822 7131930 or email info@metav-werkzeuge.com for delivery from Emmerich Technical data Article number: 651-2-H-D-C2 Brand: Kukamet Model: 651 Type: Pneumatic clamp Classification: eClass 21021004 ETIM: EC011973 Facts Arm length: 112 mm Actuation force max: 1,200 N Holding force max: 1,400 N Angle: 90° Special features Vertical handle Massive holding arm Vertical-foot mounting Material: galvanised FAQ How is the clamp mounted to a fixture? The Kukamet 651 pneumatic clamp is secured via a vertical-foot mounting arrangement, allowing installation at a 90° orientation to suit compact jigs and tooling plates. What forces can be expected in operation? Rated actuation is 1,200 N with a maximum holding force of 1,400 N; these figures describe the typical clamping and retention performance of the Kukamet 651 pneumatic clamp. Is the clamping unit suitable for harsh workshop environments? Yes, the unit’s galvanised construction and massive holding arm are intended to increase resistance to corrosion and wear in industrial settings. Can the clamp be used in automated stations? Pneumatic actuation and rapid, repeatable cycles make this clamp suitable for integration into automated or semi-automated production lines. What is the exact product identifier for ordering? Order or reference the clamp using SKU 651-2-H-D-C2 for the Kukamet 651 pneumatic clamp when contacting Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Clamp, Massive Holding Arm, Galvanised - Kukamet
Taking advantage of its 1,200 N clamping force and galvanised, heavy-duty arm, this pneumatic clamp ensures reliable, repeatable workholding with minimal upkeep. The robust 112 mm reach and vertical-base mounting support stable fixture integration for production and jig applications. Order the Pneumatic clamp 651 directly via Metav Werkzeuge or ask our consultants if needed. 651 Pneumatic clamp by Kukamet — vertical base, 1,200 N clamping force The 651 Pneumatic clamp is a lever-style workholding device designed for secure, repeatable clamping in production fixtures and workshop jigs using a vertical base mounting. Massive holding arm, 112 mm reach Vertical base for stable mounting Galvanised steel construction resists corrosion Max. clamping force 1,200 N; holding force 1,400 N Consistent, measurable clamping for production use The pneumatic lever design delivers a clearly defined clamping force that stabilises components during machining and assembly. With a rated clamping force of 1,200 N and a separate holding force of 1,400 N, the device provides a reliable force balance that reduces variances between cycles and supports repeatable positioning. The 112 mm reach of the heavy-duty arm allows secure engagement with a wide range of workpieces, while the vertical-base mounting simplifies integration into stands and fixtures. This performance-oriented configuration supports efficient production workflows by reducing rework and setup time. Durable construction lowers maintenance and downtime Constructed from galvanised steel with a massive holding arm, the clamp is designed to withstand workshop conditions and limit corrosion effects on moving parts. Galvanisation forms a protective zinc layer that reduces surface oxidation and extends service intervals, helping to keep maintenance effort low. The robust mechanical components of the lever mechanism resist wear, which contributes to a longer lifecycle and dependable operation in repetitive tasks. These properties combine to support stable uptime and predictable tool behaviour across extended production runs. Easy integration into jigs, fixtures and automation The lever clamping principle and a 90° locking angle enable compact, space-efficient mounting and quick actuation within bespoke fixtures. The vertical-base mounting offers a stable footprint for bolting the clamp to plates or subframes, simplifying alignment in modular tooling systems. Because the unit operates pneumatically, it can be incorporated into semi-automated stations or manual workbenches where rapid, repeatable clamping cycles are required. The simple mechanical interface and standard mounting orientation make the clamp suitable for retrofits as well as new installations, supporting faster project implementation. Discuss specification and delivery with Metav Werkzeuge to configure the Kukamet 651 Pneumatic clamp for the intended fixture or production cell and arrange supply from Emmerich. Technical data SKU: 651-2-D-C2 Name: Pneumatic clamp 651 Manufacturer: Kukamet Facts Arm length: 112 mm Clamping force (max): 1,200 N Holding force (max): 1,400 N Locking angle: 90° Special features Vertical base mounting Galvanised material Massive holding arm Lever clamp type FAQ What maximum clamping force does this clamp provide? The Kukamet 651 Pneumatic clamp (SKU 651-2-D-C2) provides a maximum clamping force of 1,200 N and a holding force rated at 1,400 N. Is the clamp suitable for heavy-duty workshop environments? Yes, the galvanised construction and massive holding arm make the unit appropriate for robust workshop use, offering improved resistance to corrosion and reduced wear. How is the clamp mounted in a fixture? The unit is supplied for vertical-base mounting, allowing bolting to plates or subframes and straightforward integration into jigs and modular tooling. Can the 651 be integrated into semi-automated stations? The pneumatic actuation and lever-style mechanism enable integration into semi-automated or manual stations where consistent, repeatable clamping cycles are required. What maintenance is required to keep the clamp reliable? Regular inspection of the lever mechanism and pneumatic connections is recommended; the galvanised finish reduces corrosion-related maintenance and supports long-term reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1200 N Pneumatic Vertical Base Clamp Without Handle, Zinc Coated, 1400 N Retaining Force - Kukamet
Take advantage of reliable pneumatic actuation, a compact vertical-foot design and corrosion-resistant galvanised construction to secure fast, reproducible clamping cycles. Order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Pneumatikspanner 651 — Pneumatic toggle clamp with 1,200 N actuation (Kukamet) The Pneumatikspanner 651 is a pneumatic toggle clamp designed for secure, repeatable holding in assembly and machining fixtures; suited to vertical-foot mounting and 90° clamping applications Galvanised steel construction for durability 1,200 N pneumatic actuation force 90° clamping angle for vertical mounting Compact 0.57 kg body reduces fixture load Consistent clamping performance for high-throughput production The Pneumatikspanner 651 delivers a controlled pneumatic actuation that translates to 1,200 N of clamping force and a holding force of 1,400 N, ensuring stable workpiece retention during machining and assembly operations. This level of repeatable force reduces the need for readjustment and lowers scrap rates, which benefits production efficiency and quality control. The pneumatic mechanism provides short cycle times and consistent force application, making the clamp suitable for automated or semi-automated fixtures where process stability is critical. Space-saving design that fits into compact fixtures A compact unit mass of 0.57 kg combined with a vertical foot mounting option and a 90° clamping angle allows the clamp to be integrated into confined tooling layouts with minimal modification. The galvanised finish offers basic corrosion resistance, extending service life in standard workshop environments. The absence of a manual handle minimises interference in tight assemblies and prevents inadvertent actuation, which is advantageous in densely packed jigs and when multiple clamps operate in close proximity. Simple integration and low-maintenance operation The pneumatic toggle configuration simplifies connection to existing compressed-air systems and supports standard pneumatic control hardware for synchronized operation. The compact construction and zinc-coated surfaces require only routine inspection and basic cleaning; there are no elaborate user-servicing procedures. Installation uses the vertical base for secure fastening to tooling plates or fixture blocks, and compatibility with common clamping arrangements makes commissioning straightforward. The result is a dependable clamp that keeps downtime and maintenance effort to a minimum while supporting continuous production. Contact Metav Werkzeuge for tailored application guidance on Kukamet pneumatic clamps—call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange supply from Emmerich and ensure the right configuration for the task Technical data SKU: 651-2 GTIN: 8680731503081 Manufacturer: Kukamet Facts Max actuation force: 1,200 N Max holding force: 1,400 N Weight: 0.57 kg Clamping angle: 90° Mounting: vertical foot eCl@ss: 21021004 ETIM: EC011973 Special features Material: galvanised Without handle Pneumatic toggle clamp Category: Spanner FAQ What is the maximum clamping force of this clamp? The Pneumatikspanner 651 provides a pneumatic actuation force of 1,200 N and a maximum holding force of 1,400 N for secure retention during machining and assembly. Can the clamp be mounted in confined fixtures? Yes, the compact design and vertical-foot mounting of the pneumatic toggle clamp make it suitable for integration into tight tooling layouts and stacked fixture arrangements. Is the surface finish suitable for workshop environments? The galvanised construction on the Pneumatikspanner 651 offers basic corrosion resistance appropriate for standard workshop and industrial environments. Does the clamp require a manual handle for operation? This model is supplied without a manual handle; the pneumatic actuation is intended for use with compressed-air control systems or automatic fixture controls. What maintenance does the clamp need? Routine inspection, cleaning and verification of pneumatic connections are sufficient; the clamp’s simple construction avoids complex maintenance procedures and supports long service intervals. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp Heavy-Duty Lever Clamp, 4 500N Thrust / 5 000N Hold, Galvanised - Kukamet
Take advantage of the robust galvanised construction, the massive holding arm and the clear mounting option with a vertical foot for dependable fixture performance; order directly via Metav Werkzeuge or ask our consultants for application advice. Horizontal clamp 112 — lever-operated horizontal clamp with massive holding arm and 5,000 N holding force (Kukamet) The Horizontal clamp 112 is a lever clamp designed for fixture and jig use in workshops and production, featuring a vertical foot for stable mounting and a 90° clamping angle for precise positioning. Massive holding arm for high rigidity Vertical foot mount for secure installation Galvanised steel construction for corrosion resistance 5,000 N maximum holding force for heavy-duty clamping Consistent clamping performance for repetitive production The robust lever-operated design provides reliable, repeatable clamping cycles suited to short-run and batch production. With a maximum holding force of 5,000 N and a corresponding pressing force of 4,500 N, the unit secures components without the need for constant readjustment. The clamping behaviour is predictable and measurable, which simplifies fixture design and minimises setup time on the shop floor. Built to reduce maintenance and withstand workshop conditions Constructed from galvanised steel, the clamp resists corrosion in workshop environments and requires minimal upkeep. The massive holding arm increases stiffness under load, lowering the risk of deformation and reducing downtime for replacements. At 1.385 kg, the assembly is sturdy yet manageable for retrofitting into existing jigs, helping to extend the life of fixtures while keeping handling straightforward. Simple integration into production jigs and tooling plates The clamp’s vertical foot mount allows direct attachment to baseplates and tooling fixtures, keeping the clamping plane aligned at 90° for consistent locating. An arm length of 129 mm provides good leverage and reach for a variety of workpiece geometries. The compact footprint and predictable kinematics of the mechanism make it suitable as a primary hold-down in dedicated fixtures or as part of modular clamping systems. Clear specifications for engineering and procurement All essential technical characteristics are stated in measurable terms to support selection and documentation: holding force, pressing force, mounting type, and material finish. The clamp is ideal where stable, long-lasting clamping is required without elaborate maintenance procedures. For procurement and CAD planning, the unit’s SKU and identifiers are provided in the technical data below to ensure correct ordering and traceability. For robust, repeatable clamping choose Kukamet’s Horizontal clamp 112 — contact Metav Werkzeuge for delivery options and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 112-5-D-C1 GTIN: 8680731500653 Manufacturer: Kukamet Specifications Maximum holding force: 5,000 N Maximum pressing force: 4,500 N Arm length: 129 mm Clamping angle: 90° Weight: 1.385 kg eClass: 21041719 ETIM: EC011973 Materials & features Material: galvanised steel Mounting type: vertical foot Massive holding arm: yes Design: lever-operated horizontal clamp Category: clamps (Spanner) FAQ What clamping forces does the Horizontal clamp 112 provide? The Horizontal clamp 112 from Kukamet delivers a maximum holding force of 5,000 N and a pressing force of 4,500 N, suitable for heavy-duty fixture tasks. Can the clamp be mounted on tooling plates with existing holes? Yes, the vertical foot mounting is intended for secure attachment to baseplates and jig surfaces; the robust foot improves repeatability when integrated into fixture plates. Is the finish suitable for humid workshop environments? The clamp features a galvanised steel finish that offers corrosion resistance, making it appropriate for standard workshop and production conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc-Plated 4.5kN Pressure - Kukamet
Robust, compact and corrosion-resistant: benefit from the combination of high holding capacity, a galvanised finish and a compact 129 mm arm for secure fixture clamping in confined workstations. Order this clamp directly via Metav Werkzeuge or ask our consultants for specification support. Horizontal clamp 111 by Kukamet — 90° lever, galvanised finish The 111 horizontal clamp is a compact lever clamping solution for workshop and production fixtures, designed for horizontal-base mounting and medium-duty applications. Heavy-duty 129 mm holding arm 5,000 N maximum holding force 4,500 N maximum clamping force Galvanised finish for corrosion resistance Secure clamping where space is limited The compact lever design provides a small footprint while maintaining a 129 mm reach, making the clamp suitable for confined jigs and fixture arrays. The horizontal-base configuration ensures stable attachment to machine tables and fixture plates, reducing the need for frequent repositioning. Thanks to the robust arm construction, set-up time is shortened and repeatable positioning is supported, which improves cycle-time consistency on small-batch production runs. Reliable force ratings for consistent fixtures Rated at 4,500 N clamping force and 5,000 N holding force, the unit delivers predictable performance under load. Clamping force denotes the pressure applied to the workpiece during actuation, while holding force indicates the resistance to displacement once engaged; both values are essential when designing a fixture to prevent movement during machining or assembly. The clear specification allows planners to match the clamp to fixture requirements and avoid over- or under-sizing, helping to reduce rework and downtime. Corrosion protection and safe operation prolong service life A galvanised surface finish provides corrosion resistance for workshop environments, while the integrated safety lock prevents unintended release under vibration or impact. The lever actuates to a defined 90° position and the overall unit remains lightweight at approximately 1.4 kg, which eases handling during assembly of multiple clamps. These features combine to deliver a durable solution that lowers total cost of ownership by extending maintenance intervals and supporting safe, reliable operation. Choose Kukamet's compact 90° lever clamp for dependable fixture retention — contact Metav Werkzeuge for technical advice or to reserve stock at our Emmerich warehouse: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: 111-5-D-L-C1 GTIN: 8680731500349 Manufacturer: Kukamet Facts Arm length: 129 mm Angle: 90° Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Weight: 1.4 kg eClass: 21041719 ETIM: EC011973 Special features Galvanised material Massive holding arm Safety lock Horizontal base mounting Lever clamp design FAQ What mounting arrangement does the clamp require? The clamp is designed for horizontal base mounting; the horizontal foot provides a stable attachment point for machine tables and fixture plates. Can the clamp withstand workshop conditions and moisture? Yes, the galvanised finish gives corrosion resistance suitable for typical workshop environments and helps to extend service life. What is the difference between clamping force and holding force? Clamping force (4,500 N for this unit) is the applied force during actuation; holding force (5,000 N) is the resistance to displacement once engaged, relevant for fixture stability. Is this clamp suitable for automated fixtures or manual jigs? Its compact lever form and reliable safety lock make it suitable for both manual jigs and many automated or semi-automated fixture applications where the specified forces meet process requirements. Which item code identifies this clamp for ordering? Order using SKU 111-5-D-L-C1; the clamp is supplied by Kukamet and distributed through Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp With Solid Arm And Safety Lock, 5 000 N Holding Force - Kukamet
Take advantage of the combination of high holding power, a 129 mm robust arm, and a secure safety lock for consistent fixture performance. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 — horizontal lever clamp with 5,000 N holding force and 129 mm arm (Kukamet) The Horizontal clamp 112 is a compact horizontal lever clamp designed for jigs, fixtures and repetitive workholding where reliable 90° locking and vertical-foot mounting are required. 5,000 N maximum holding force 4,500 N clamping force 129 mm robust support arm Vertical-foot mounting, 90° locking Reliable clamping where repeatability matters The clamp combines a high holding force with a compact footprint to secure components during machining or assembly. The separation between clamping force (4,500 N) and holding force (5,000 N) ensures the fixture resists release under load, reducing rework and downtime. With a 129 mm support arm and a locking angle of 90°, the device stabilises workpieces accurately in repeat processes. The blackened finish contributes to wear resistance and a professional workshop appearance. Built for secure, long-term operation A massive support arm and a positive safety lock reduce the risk of accidental release and support continuous production use. The vertical-foot mounting simplifies integration into standard fixture plates and dedicated tooling plates without additional adapters. At 1.42 kg, the unit balances rigidity with manageable mass for modular fixture construction. Components subject to frequent clamping cycles benefit from the robust mechanical design and the clear distinction between temporary clamping and permanent holding states. Easy integration and straightforward maintenance The horizontal lever design allows fast actuation and straightforward placement in lean production setups. The mounting style and compact dimensions enable multiple clamps to be arranged closely for complex workholding tasks, improving cycle efficiency. Routine inspection focuses on the lever pivot and lock engagement; lubrication intervals are dictated by operating conditions. Technical teams will appreciate the clear specification of holding and clamping forces, which permits rapid calculation of required clamping layouts for both manual and automated cells. For reliable industrial workholding through Kukamet’s proven lever technology, request supply and advice from Metav Werkzeuge — contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: B112-5-D-L-C1 Manufacturer: Kukamet Weight: 1.42 kg Arm length: 129 mm Angle: 90° Mounting: vertical foot Facts Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Special features Massive support arm Safety lock for secure holding Blackened finish Horizontal lever clamp design FAQ What holding and clamping forces does this clamp provide? The Horizontal clamp 112 offers a maximum holding force of 5,000 N and a clamping force of 4,500 N, allowing clear distinction for fixture design. Is a safety lock included with the clamp? Yes, the unit features a mechanical safety lock and a massive support arm to prevent unintended release during operations. How is the clamp mounted in a fixture? The clamp is designed for vertical-foot mounting, enabling direct attachment to fixture plates or dedicated mounting blocks at a 90° locking angle. What are the dimensions relevant for tool layout? Key dimensions are a 129 mm support arm and a compact body weight of 1.42 kg, suitable for dense arrangements in jigs and fixtures. Can this clamp be used in automated setups? The robust lever and locking mechanism make the clamp suitable for manual and automated fixtures where consistent repeatability is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 129mm Horizontal Clamp With Solid Holding Arm, 5 000 N Hold Force, Galvanised - Kukamet
Take advantage of a galvanised, heavy-duty design combined with a high 5,000 N holding capacity and a compact 129 mm arm for secure fixture clamping and reliable production runs. Order the clamp via Metav Werkzeuge or request advice from our specialists for seamless integration. Horizontal clamp 111 — Kukamet horizontal toggle clamp, galvanised, 5,000 N holding force The Horizontal clamp 111 is a robust horizontal toggle clamp designed for fixture and jig use in metalworking and general workshop assembly, providing secure retention at a 90° lever angle. Galvanised steel construction 5,000 N maximum holding force 129 mm solid holding arm Horizontal base for secure mounting Secure clamping that keeps production moving The clamp delivers a clear technical advantage: a 5,000 N maximum holding capacity with a 4,500 N maximum clamping pressure, ensuring components remain immobile during machining, welding or assembly. This difference between holding and clamping values reflects the device’s dual role — the higher holding force secures parts against movement, while the clamping pressure is the direct force applied to the workpiece. The reliable mechanical action of the toggle mechanism reduces rework and improves throughput by maintaining consistent positioning under cyclical loads. Durable construction for workshop conditions Made from galvanised steel with a solid holding arm, the device resists corrosion and mechanical wear typical in production environments. The compact mass and build quality (weight approx. 1.378 kg) deliver a stable feel without excessive bulk, enabling close-packed fixture layouts. The robust arm and pivot points are engineered for frequent operation, so maintenance intervals are extended and component replacement is minimised — a tangible benefit for routine production processes. Simple integration and precise positioning A horizontal base and a defined 90° lever geometry allow straightforward mounting into benches, jigs and welding fixtures. The 129 mm arm provides effective leverage for fast clamping action while keeping the overall footprint small, making the clamp suitable for both CNC tooling jigs and manual assembly stations. The flat base simplifies alignment and repeatable positioning, which shortens set-up times and stabilises cycle performance across batches. Practical applications and efficiency gains This clamp is intended for use wherever secure, repeatable retention is required: fixture plates, welding jigs, assembly benches and test rigs. Its galvanised finish and solid arm make it appropriate for demanding shop-floor situations where reliability and uptime matter. By integrating this clamp into a fixture, operators benefit from reduced handling time and fewer positional errors, contributing to measurable process efficiency and a more predictable production flow. Opt for the Kukamet horizontal clamp 111 for dependable fixture retention — contact Metav Werkzeuge in Emmerich for technical clarification or to secure supply direct from stock. Technical data Article number: 111-5-D-C1 GTIN: 8680731500318 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 129 mm Weight: 1.378 kg Holding force (max): 5,000 N Clamping force (max): 4,500 N Angle: 90° Special features Material: galvanised Mounting: horizontal base Solid holding arm Category: clamp FAQ What is the difference between holding force and clamping force for this clamp? The holding force refers to the maximum retention capability (5,000 N) of the clamp once engaged; the clamping force (4,500 N) denotes the direct pressure applied to the workpiece by the mechanism during closure. Can the clamp be mounted on a fixture plate or bench? Yes. The horizontal base is intended for secure mounting to fixture plates, benches and jig assemblies, allowing repeatable positioning and easy alignment. Is the clamp suitable for welding fixtures and humid environments? The galvanised steel construction improves corrosion resistance, making the clamp suitable for welding jigs and general workshop environments where occasional exposure to moisture occurs. How compact is the arm and what leverage does it provide? The arm length is 129 mm, offering a balance of compact footprint and effective leverage for fast, secure clamping action in confined fixture arrangements. Which SKU should be referenced when ordering spare parts or additional units? Reference SKU 111-5-D-C1 and GTIN 8680731500318 when ordering additional clamps or enquiring about compatibility. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 130mm Pneumatic Clamp With Vertical Foot, Massive Holding Arm, 4.5kN Push / 5kN Hold, Galvanised - Kukamet
A compact, heavy‑duty solution: galvanised construction plus a 130 mm massive hold arm and up to 5,000 N holding force deliver secure right‑angle clamping and long service life; order the Pneumatic clamp 651 directly via Metav Werkzeuge or consult their specialists for application advice. Pneumatic clamp 651 — 90° vertical‑foot pneumatic clamp by Kukamet A Pneumatic clamp 651 designed for reliable right‑angle holding in jigs, fixtures and repetitive assembly processes. Galvanised steel construction 130 mm heavy-duty hold arm 90° lock with 5,000 N holding force Vertical-foot mounting for stable fixing High‑force pneumatic actuation for consistent production results The pneumatic actuation provides a measurable and repeatable clamping action, driven by a maximum actuation force of 4,500 N and a holding capacity of 5,000 N. This combination reduces variation between cycles and supports process reliability in medium‑ to high‑volume operations. The clearly defined forces help planners calculate fixture loads and safety factors, while the pneumatic drive enables fast clamping and unclamping without manual effort. Built for durability on the shop floor Constructed from galvanised steel and fitted with a massive holding arm, the unit resists wear and corrosion in demanding environments. The 130 mm arm offers extended reach for deeper workpieces, maintaining stiffness and preventing deflection under load. These material and design choices translate into longer maintenance intervals and stable clamping performance over time, which is beneficial where uptime and consistency matter most. Space‑efficient mounting and right‑angle positioning The vertical‑foot mounting places the clamp base beneath the fixture plate, saving horizontal space and simplifying layout in tight assemblies. The integrated 90° locking position secures workpieces at a precise right angle, making the device suitable for welding jigs, inspection fixtures and repeatable assembly stations where orthogonal alignment is required. The mounting arrangement supports straightforward integration into existing tooling. Practical installation and predictable upkeep The mechanical design emphasises straightforward installation and predictable service needs. The robust components minimise wear items, while the pneumatic operation reduces operator intervention. For system planners, the clear numeric data for actuation and holding forces enables exact load calculations and helps select suitable pneumatic valves and safety devices. Replacement parts and routine checks focus on seals and pivot points to preserve consistent clamp function. Contact Metav Werkzeuge for Kukamet 651 enquiries, availability and specification support — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fixture integration and delivery from Emmerich Technical Data SKU: 651-5-D-C1 Brand: Kukamet eClass: 21021004 ETIM: EC011973 Facts Arm length: 130 mm Holding force max: 5,000 N Actuation force max: 4,500 N Angle: 90° Features Material: galvanised steel Mounting: vertical foot Massive holding arm Design type: pneumatic clamp FAQ Is the clamp suitable for automated production lines? The Kukamet Pneumatic clamp 651 is designed for repetitive work and its pneumatic actuation with 4,500 N actuation force supports integration into automated or semi‑automated lines. What holding force can be expected from this clamp? Rated holding force for the Pneumatic clamp 651 is 5,000 N, providing secure fixation for many assembly and fixture applications. How is the clamp mounted to a fixture? Mounting is via a vertical foot, enabling the clamp to be fixed beneath or alongside a plate for space‑efficient integration. What advantage does the 130 mm arm offer? The 130 mm heavy‑duty arm increases reach for deeper workpieces while maintaining rigidity and repeatable clamping geometry. Is the clamp corrosion‑resistant for workshop environments? The unit is galvanised, offering enhanced resistance to corrosion and making it suitable for typical shop floor conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 1400 N Vertical Clamp Zinc Plated, 1625 N Holding Force - Kukamet
Take advantage of reliable, compact clamping with a galvanised finish, 1,400 N clamping force and a horizontal base that fits into light to medium-duty fixtures; order the Vertical Clamp 251 directly via Metav Werkzeuge or ask our consultants if needed. Vertical Clamp 251 (251-3) — Kukamet vertical lever clamp, 90° angle, galvanised A Vertical Clamp 251 designed for secure workholding in jigs and fixtures where a compact, lightweight lever clamp is required for repeatable vertical clamping. Galvanised finish for corrosion resistance 1,400 N clamping force for secure holding 90° clamping angle for vertical operation Compact 0.27 kg with horizontal base mount Reliable clamping performance for production use The clamp delivers a clear technical benefit: a 1,400 N maximum clamping force combined with a 1,625 N holding force ensures stable retention of workpieces during machining, assembly or inspection. The specification translates directly into fewer relocations and faster cycle times on production benches. By converting the raw figures into operational terms, the unit provides predictable clamping capacity for light to medium-duty tasks and makes process planning more straightforward for workshop managers. Durable finish and compact construction reduce maintenance A galvanised coating protects the metal surfaces from corrosion, extending service life in everyday workshop environments. Its 0.27 kg weight and compact geometry reduce added mass on fixtures, which is particularly useful for jigs that must be repositioned frequently. The lever mechanism is simple to maintain; with fewer moving parts the risk of downtime is minimised, supporting a cost-effective, long-term workflow without complex servicing requirements. Practical integration into fixtures and jigs Designed with a horizontal base and a 90° clamping angle, the Vertical Clamp 251 fits common jig plate layouts and offers straightforward mounting on flat surfaces. The lever-style actuation provides rapid engagement and disengagement for repetitive tasks, improving throughput where frequent clamp operations are required. The clamp’s design suits applications such as small-part assembly, light machining and inspection fixtures, where reliable vertical clamping and compact footprint matter most. For consistent workshop clamping with Kukamet quality, contact Metav Werkzeuge for tailored advice or to arrange supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 251-3 GTIN: 8680731504521 Brand: Kukamet Material: galvanised Weight: 0.27 kg Mounting: horizontal base Angle: 90° Max clamping force: 1,400 N Max holding force: 1,625 N eClass: 21041717 ETIM: EC011973 Core specifications Clamping force (max): 1400 N Holding force (max): 1625 N Weight: 0.27 kg Angle: 90° SKU: 251-3 Features Lever clamp design Galvanised coating Horizontal foot for base mounting No special features FAQ What maximum clamping force does the clamp provide? The clamp provides a maximum clamping force of 1,400 N; the specified holding force is 1,625 N for secure retention. Which materials is this clamp suited for in fixtures? The clamp’s design is suitable for a wide range of workshop applications including light machining and assembly of metals and engineering plastics where vertical clamping is required. How is the clamp mounted? Mounting is via a horizontal base (horizontal foot), making it compatible with flat jig plates and baseboards. What surface protection does the clamp have? The component is galvanised, offering corrosion resistance suitable for standard workshop environments. What is the product SKU and brand for ordering reference? Ordering reference: Kukamet Vertical Clamp 251, SKU 251-3, GTIN 8680731504521. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 140mm Horizontal Clamp With Heavy Duty Arm, 850N Thrust, Zinc-Plated - Kukamet
Take advantage of a robust, galvanised construction combined with a massive 140 mm holding arm and up to 850 N clamping force for secure, repeatable workholding. Order the clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Horizontal toggle clamp 113 by Kukamet — galvanised, 140 mm arm, 850 N clamping force A Horizontal toggle clamp 113 engineered for reliable fixture work and quick, positive locking where compact, right-angle mounting is required. Galvanised steel construction Massive 140 mm holding arm 850 N clamping force 90° angle-foot mounting Secure, repeatable clamping that improves process reliability The clamp delivers a consistent 850 N clamping force and a separate 1,000 N holding capacity, providing a clear technical basis for dependable fixturing in serial and single-piece production. The combination of a massive holding arm and a galvanised body reduces vibration and movement during machining and assembly operations, which in turn improves dimensional repeatability. Designed for lever-action use, the mechanism locks positively in the horizontal plane, minimising the need for readjustment and supporting efficient cycle times. Compact mounting for flexible fixture design With a 140 mm arm and a 90° angle-foot mounting, the clamp integrates into tight jigs and modular fixture plates while keeping the working envelope small. The low mass of 0.164 kg supports lightweight fixture systems without compromising on strength, and the angled foot provides straightforward, space-saving attachment to plates or frames. The toggle action allows rapid engagement and release, reducing handling time and supporting smoother workflow on the shop floor. Galvanised finish and robust mechanics for low maintenance Constructed from galvanised material and featuring a substantial holding arm, the clamp is intended for prolonged use with minimal upkeep. The corrosion-resistant surface treatment extends service life in typical workshop environments and simplifies routine cleaning. Reliable mechanical locking reduces unintended release, supporting operator confidence and workplace safety. The unit is identified by SKU 113-1-D-C3 and manufactured by Kukamet, offering a compact, pragmatic solution for demanding workholding tasks. Contact Metav Werkzeuge today to discuss the Kukamet horizontal toggle clamp 113 and how its robust galvanised construction and high clamping force can be applied to improve fixture stability in production or maintenance setups. Technical data Article number: 113-1-D-C3 GTIN: 8680731505733 Facts Arm length: 140 mm Clamping force: 850 N Holding force: 1,000 N Angle: 90° Weight: 0.164 kg Special features Mounting: angle foot Material: galvanised steel Massive holding arm Model: 113 Brand: Kukamet FAQ What clamping force can be expected from this toggle clamp? The Kukamet horizontal toggle clamp 113 provides a clamping force of 850 N and a holding capacity of 1,000 N, suitable for secure fixturing under typical workshop loads. How is the clamp mounted to a fixture plate? Mounting is carried out via the 90° angle foot, allowing direct attachment to plates or frames; the compact design supports integration into tight fixture layouts. What is the arm length of the clamp and why does it matter? The arm length is 140 mm, which balances reach and leverage to deliver consistent force while keeping the fixture footprint compact. Is the clamp suitable for use in humid or corrosive workshop conditions? The clamp has a galvanised finish that improves resistance to corrosion in standard workshop environments; regular inspection and cleaning are still recommended. Which SKU should be ordered for this model? Order the unit with SKU 113-1-D-C3; the clamp is identified as model 113 from Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 140mm Horizontal Clamp With Massive Arm, Safety Lock, 1,000N Holding Force - Kukamet
Take advantage of the solid 140 mm holding arm, integrated safety lock and up to 1,000 N holding force for dependable, repeatable workholding; order via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 113 — Kukamet horizontal lever clamp with 140 mm arm and 1,000 N holding force Horizontal clamp 113 is a compact lever-style clamp for secure, repeatable fixture work, designed for mounting on an angle base in jigs and small assembly stations 140 mm solid holding arm 90° angle base for fixed positioning Up to 1,000 N holding force Safety lock for secure clamping Reliable clamping where repeatability matters The lever-style clamp delivers a clear mechanical advantage: a holding force of 1,000 N and a maximum pressing force of 850 N translate into stable fixation of workpieces during assembly or light machining operations. The 140 mm arm provides reach while keeping the overall footprint small, allowing integration into tight fixtures. Built with a solid holding arm and a positive safety lock, the mechanism prevents accidental release and supports consistent cycle times on production lines and test rigs. Compact design with industrial finishes for durability Finished in a black oxide (brüniert) surface treatment, the clamp resists corrosion in workshop environments while maintaining a low visual profile in fixtures. Weighing approximately 0.155 kg, the device balances strength with minimal added mass to moving assemblies. The 90° angle base simplifies positional alignment on plates and blocks; the robust mounting makes it suitable for repeated clamping cycles and saves assembly time compared with loose or makeshift holding methods. Simple integration and clear technical advantages Mounting is straightforward: a fixed angle foot secures the clamp to a base plate and ensures a precise lever trajectory. The mechanical design avoids complex adjustment, so set-up time is reduced and throughput improves. For applications where safe, repeatable holding is required—such as small-batch production, inspection fixtures or fixture prototypes—this lever clamp provides a pragmatic combination of compact dimensions, measurable clamping force and a safety mechanism that supports operator confidence. Contact Metav Werkzeuge for tailored advice or to secure a Kukamet Horizontal clamp 113 for reliable workholding — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B113-1-D-L-C3 eClass: 21041719 ETIM: EC011973 Arm length: 140 mm Holding force: 1,000 N Maximum pressing force: 850 N Angle: 90° Weight: 0.155 kg Material: black oxide finish Mounting: angle foot Special features: solid holding arm and safety lock Story trigger: lever clamp FAQ What clamping force can be expected from this horizontal clamp? The Kukamet Horizontal clamp 113 provides up to 1,000 N holding force with a maximum pressing force of 850 N, giving a reliable mechanical hold for assembly and light machining tasks. How is the clamp mounted in a fixture? The clamp is fitted via a 90° angle foot, allowing secure bolting to base plates or fixture blocks; the fixed mounting ensures repeatable lever movement and alignment. Is the lever mechanism safe for repeated manual use? Yes, the unit incorporates a safety lock and a solid holding arm to prevent accidental release and to support safe, repeatable operation during frequent clamping cycles. Which finish and material characteristics support durability? The device is supplied with a black oxide finish that reduces corrosion risk while maintaining surface integrity under typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 140mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc-Plated - Kukamet
Take advantage of a compact, galvanised clamp that combines a 140 mm robust holding arm with a secure safety locking mechanism, delivering up to 1,000 N holding force for reliable positioning. Order the clamp directly via Metav Werkzeuge or contact the consultants for specification advice. Horizontal toggle clamp 113 — galvanised lever clamp with safety lock (Kukamet) Horizontal toggle clamp 113 is a compact lever clamp designed for fixture workholding in machining and assembly, providing repeatable clamping at a 90° angle. Heavy-duty galvanised construction 140 mm robust holding arm Safety locking mechanism Holding force 1,000 N, pressure 850 N Consistent clamping for production environments The galvanised construction delivers corrosion resistance and long service life in workshop settings while maintaining a compact footprint. The 140 mm holding arm and solid build translate directly into repeatable clamping performance, reducing setup variation in jigs and fixtures. With a rated holding force of 1,000 N and a maximum applied pressure of 850 N, the device is suited to light- and medium-duty workholding tasks where reliable part retention is essential for process stability. Safe handling and fast integration into tooling A reinforced holding arm with a dedicated safety lock minimises unintentional release during handling or vibration-prone operations. The clamp’s angled base facilitates mounting on fixture plates and modular frames, allowing quick mechanical integration without complex adaptors. This combination of secure locking and straightforward attachment supports efficient changeovers and reduces the risk of downtime due to unclamping. Material choice and workshop suitability Constructed from galvanised steel, the clamp resists surface corrosion common in humid or coolant-exposed environments, helping to preserve function and surface finish over time. The lightweight design (0.155 kg) keeps added mass on tooling low, which is advantageous for mobile fixtures and handheld jigs. The robust mechanical design favours longevity and predictable wear behaviour, simplifying maintenance schedules and inventory planning. Designed for clear specification and reliable performance Technical specification such as arm length, holding and pressure forces are stated clearly to support selection and documentation in procurement and engineering planning. The solid lever principle ensures mechanical advantage without electrical components, reducing potential failure modes and facilitating straightforward inspection routines. This mechanical simplicity supports both operational reliability and ease of replacement within existing clamping systems. Contact Metav Werkzeuge for application guidance or to request the Kukamet Horizontal toggle clamp 113 (SKU 113-1-D-L-C3) directly from stock in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 113-1-D-L-C3 GTIN: 8680731505764 Designation: Horizontal toggle clamp 113 Manufacturer: Kukamet Facts Arm length: 140 mm Holding force max: 1,000 N Pressure force max: 850 N Angle: 90° Weight: 0.155 kg Eclass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: angled base (Winkelfuß) Massive holding arm Safety locking mechanism Category: Spanner FAQ What clamping forces does the horizontal toggle clamp provide? The Horizontal toggle clamp 113 offers a holding force of 1,000 N and a maximum applied pressure of 850 N, suitable for light to medium workholding tasks. How is the clamp mounted to a fixture or jig? Mounting is via an angled base (Winkelfuß) that allows attachment to fixture plates and modular frames; the design supports quick mechanical integration. Which material is the clamp made from and how does that affect use? The clamp is galvanised, providing corrosion resistance for workshop environments and coolant exposure while ensuring a long service life. Does the clamp include a safety feature to prevent accidental release? Yes, the device includes a safety locking mechanism and a massive holding arm to secure the lever in the clamped position and reduce accidental opening. What are the dimensions and weight relevant to fixture design? Key dimensions are a 140 mm holding arm and a 90° operating angle; weight is 0.155 kg, which minimises added mass to tooling assemblies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 140mm Horizontal Clamp With Solid Holding Arm, 850 N Actuation Force, 1000 N Holding Force - Kukamet
Combining a robust massive holding arm, precise holding force of 1,000 N and compact 140 mm reach results in dependable clamping with minimal setup effort; order the Kukamet 113 horizontal clamp directly via Metav Werkzeuge or consult our advisors for system integration. Kukamet 113 horizontal clamp — 140 mm arm, 850 N clamping force The 113 horizontal clamp is a lever-operated horizontal clamp designed for jigs and fixtures where secure, repeatable 90° positioning and compact mounting are required. Solid 140 mm holding arm 850 N maximum clamping force 1,000 N rated holding force Angled foot mount for 90° positioning Secure, repeatable clamping for production use The robust design delivers consistent clamping and repeatable positioning, making it suitable for assembly jigs and repetitive fixture tasks. With a holding force of 1,000 N and a maximum clamping force of 850 N, the device maintains workpiece stability during machining, welding or inspection operations. The massive holding arm increases leverage and reduces deformation under load, which translates into fewer reworks and improved process reliability. Technical terms such as clamping force (actual applied force during engagement) and holding force (resistance against unintended release) are purposely separated to help in process planning and safety assessment. Compact mounting and straightforward integration into fixtures The angled foot mounting allows a compact footprint where floor or plate space is limited, while the 90° orientation assists in aligning clamps in confined setups. The 140 mm arm provides reach without excess bulk, and the light overall mass of 0.164 kg keeps added inertia to a minimum on moving assemblies. Where quick retrofitting of a clamping point is required, the angled base simplifies alignment and reduces the need for additional brackets. The blackened/brünished finish offers a uniform appearance that integrates easily into existing tooling layouts. Workshop durability and low-maintenance operation Finished in a blackened brünished coating, the clamp resists wear and surface corrosion typical in workshop environments, preserving contact geometry over time. The lever mechanism is engineered for frequent actuation, supporting high-cycle production without complex servicing. Built from hardened steel components and a massive arm, the product is intended for long-term use in demanding industrial conditions, reducing total cost of ownership through fewer replacements. For customers seeking predictable performance in jigs and fixtures, this clamp provides a balance of strength, compactness and durability. Choose Kukamet’s 113 horizontal clamp for secure, compact fixturing—contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B113-1-D-C3 GTIN: 8682843522219 Manufacturer: Kukamet ECLASS: 21041719 ETIM: EC011973 Core specifications Arm length: 140 mm Clamping force max: 850 N Holding force max: 1,000 N Angle: 90° Weight: 0.164 kg Design & features Mounting type: angled foot Massive holding arm Finish: blackened/brünished Category: Clamp (Spanner) SKU: B113-1-D-C3 FAQ What clamping and holding forces are specified for this clamp? The clamp offers a maximum clamping force of 850 N and a holding force of 1,000 N for secure fixation in fixtures; values are intended for static and typical workshop use. Is the clamp suitable for 90° fixtures and tight layouts? Yes, the angled foot and 90° orientation make the clamp suitable for compact jigs and tight fixture configurations where space optimisation is required. What materials and finish are used on the clamp? The fixture is supplied with a blackened/brünished finish and robust steel construction to resist workshop wear and surface corrosion. How long is the reach of the clamp arm? The clamp features a 140 mm arm, providing a balance between reach and compactness for typical jigs and fixtures. Can the clamp be used for high-cycle industrial applications? The lever and massive arm design are intended for frequent actuation and offer long service life under regular industrial cycling when maintained according to standard workshop practices. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141 Horizontal Clamp With Safety Lock, Zinc Plated, 1.75 kN Thrust / 2.6 kN Hold - Kukamet
Combine a solid arm with a 90° horizontal mounting and an integrated safety lock to secure workpieces reliably in fixtures and jigs. Benefit from a compact, zinc‑plated design and a holding force of 2,600 N for stable clamping under light to medium loads. Order the Horizontal clamp 141 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 141 (Kukamet) — 90° horizontal toggle clamp, zinc‑plated A Horizontal clamp 141 designed for secure 90° horizontal clamping in fixtures and jigs 90° horizontal mounting base Zinc‑plated corrosion resistance Solid arm for robust clamping Safety locking mechanism included Consistent clamping performance for production tasks The clamp delivers defined mechanical restraint with a clamping force of up to 1,750 N and a holding force of 2,600 N, values that ensure steady fixation during positioning and light machining. Measured in newtons, these figures describe the force transmitted through the toggle action and indicate the clamp’s ability to resist workpiece movement under load. This results in fewer interruptions, reduced rework and a more predictable production flow when the clamp is integrated into modular jigs or assembly fixtures. Built to endure workshop conditions Constructed from zinc‑plated components and fitted with a solid arm, the clamp offers enhanced resistance to corrosion and mechanical wear while remaining compact at approximately 0.5 kg. The finish extends service life in busy workshop environments and simplifies maintenance cycles. The robust construction supports repeated actuation and contributes to consistent clamping geometry over time, which lowers long‑term operating costs through reduced replacement and less downtime. Integrates safely into jigs and fixtures Designed with a horizontal base and a fixed 90° mounting orientation, the device is straightforward to position on flat fixtures or benches. The built‑in safety locking mechanism prevents accidental opening once the toggle is engaged, improving operator safety and process reliability. As a toggle clamp, it provides quick actuation and secure locking without complex handling, allowing fast part loading and unloading while maintaining repeatable clamping behaviour. Choose the Kukamet Horizontal clamp 141 for dependable, space‑saving clamping — contact Metav Werkzeuge in Emmerich for technical advice and reliable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 141-4-L GTIN: 8682843520178 Manufacturer: Kukamet Model designation: 141 Category path: Spanner Facts Weight: 0.5 kg Clamping force (max): 1,750 N Holding force (max): 2,600 N Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Material finish: zinc‑plated Mounting: horizontal base / horizontal foot Safety locking mechanism: yes Solid arm: yes Clamp type: toggle clamp FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 141 provides a clamping force up to 1,750 N and a holding force up to 2,600 N, giving defined restraint for fixture applications. How is the clamp mounted on a fixture? Mounting is via a horizontal base with a fixed 90° angle, intended for attachment to flat jigs or benches. Does the clamp include a safety feature to prevent accidental release? Yes, the device is fitted with a safety locking mechanism that secures the toggle in position once engaged. What material and finish does the clamp have? The clamp is zinc‑plated, combining corrosion resistance with a solid arm for mechanical robustness. Which applications suit this type of toggle clamp? Ideal for jigs, fixtures and assembly stations where quick clamping, repeatability and a secure lock at 90° are required; the compact, robust design supports frequent actuation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141mm Horizontal Clamp Heavy-Duty Arm, 3.65 kN Hold Force, Blackened Finish - Kukamet
Take advantage of a compact yet powerful clamping solution that combines a massive holding arm, a 141 mm reach and up to 3,650 N holding force for secure fixture setup. Order the horizontal clamp directly via Metav Werkzeuge or consult our technical advisers for specification matching and delivery from Emmerich. Horizontalspanner 113 — horizontal clamp with 90° angle foot and 141 mm arm (Kukamet) Horizontalspanner 113 is a horizontal clamp designed for robust fixturing at 90° with an angle foot mounting and a heavy-duty holding arm for repeatable clamping performance in workshop and light industrial environments Massive holding arm for high rigidity 141 mm reach for versatile workpiece clearance Up to 3,650 N holding force for secure clamping Angle foot mounting for stable 90° installation Reliable clamping where stiffness matters The horizontal clamp delivers a concentrated, repeatable clamping action thanks to its massive holding arm and compact geometry. The heavy arm reduces flex under load, which directly improves machining stability and repeatability when holding workpieces at right angles. With a blackened finish the component resists corrosion in workshop atmospheres while presenting a professional appearance. For applications where fixture rigidity and predictable behaviour determine part quality, this clamp provides a straightforward mechanical solution that reduces rework and keeps cycle times low. Engineered forces for consistent production Designed for measurable performance, the device offers a maximum holding force of 3,650 N and a pressing capacity of 3,500 N, values that translate into secure fixation for a wide range of materials such as mild steel, aluminium and cast components. The specification of force is given in newtons to ensure objective comparison with other clamping elements and to support process calculations for fixture design. The 141 mm arm provides clearance for tooling while keeping the centre of force close to the clamped surface, which helps to avoid unwanted moments and improve tool life. Practical mounting and durable finish for workshop use The 90° angle foot mounting enables direct installation on t-slotted tables, fixture plates or custom brackets, keeping the clamp firmly located without complex adapters. The blackened/brünierung finish offers surface protection and reduces glare during set-up. This compact unit, weighing approximately 0.915 kg, is easy to incorporate into existing assemblies and is particularly suitable for jigs and fixtures where space is limited but high holding force is required. The solid construction limits maintenance needs and keeps performance predictable across production shifts. Choose the Kukamet 113 horizontal clamp for robust right‑angle fixturing and contact Metav Werkzeuge for order placement or technical matching — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: B113-4-D-C2 GTIN: 8680731507515 Manufacturer: Kukamet Facts Arm length: 141 mm Angle: 90° Weight: 0.915 kg Max holding force: 3,650 N Max pressing force: 3,500 N eClass: 21041719 ETIM: EC011973 Special features Mounting: angle foot Finish: blackened (Schwarz brüniert) Massive holding arm (massiver Haltearm) Category: Spanner FAQ What materials can be clamped securely with this horizontal clamp? The horizontal clamp is suitable for common workshop materials including steel and aluminium; its rated holding force and robust arm design make it effective for machining and assembly tasks. How is the clamp mounted to a fixture or table? The clamp uses an angle foot mounting to enable firm 90° installation on t-slot tables, fixture plates or custom brackets for stable positioning. What does the specified holding force mean in practice? The holding force of 3,650 N indicates the maximum tensile force the clamp can reliably maintain; it helps assess suitability for the specific workpiece and machining forces. Is the finish corrosion resistant? The blackened finish provides surface protection appropriate for workshop environments and reduces surface glare during set-up. Which SKU identifies this model? This model is supplied as SKU B113-4-D-C2 and is listed under the Kukamet 113 horizontal clamp series. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141mm Horizontal Clamp With Heavy-Duty Arm And Safety Lock, Galvanised - Kukamet
Combine galvanised durability, a 3650 N holding force and a secure safety locking mechanism for dependable fixture clamping; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 113 – Kukamet, galvanised toggle clamp with angled foot and 3650 N holding force Horizontal clamp 113 is a compact industrial toggle clamp built for secure workholding in fixtures and jigs across workshop and light production environments Robust galvanised steel construction Safety latch for secure clamping 3650 N holding force 141 mm arm length for extended reach Precision clamping that reduces rework and stoppages The horizontal clamp 113 offers a clearly measurable clamping solution: with a holding force of 3650 N and a clamping force of 3500 N, the mechanism provides consistently repeatable pressure. The galvanised finish resists corrosion in workshop atmospheres, while the massive holding arm minimises deformation under dynamic loads. Translating these figures into shop-floor advantage, the clamp reduces component movement during machining or assembly, which lowers scrap rates and shortens inspection loops. Simple integration into fixtures and jigs for faster set-ups Engineered with an angled foot and a fixed 90° orientation, the clamp is intended for straightforward bolting to benches, fixtures or dedicated jigs. The 141 mm arm length extends reach without sacrificing stability, and the unit’s compact mass of 0.94 kg keeps additional fixture weight low. These attributes allow quick retrofitting into existing tooling or new production cells, cutting fixture build time and supporting lean changeovers. Built for safe, everyday workshop use Safety and longevity are central: a positive safety latch secures the clamp in the closed position and prevents accidental release, while the robust mechanics are designed for repetitive operation. The galvanised construction simplifies maintenance by offering corrosion protection and easy cleaning. For production environments seeking reliable mechanical clamping with minimal servicing, this toggle clamp delivers steadiness and predictable performance that supports continuous operation and operator confidence. Secure workshop reliability with the Kukamet horizontal clamp 113 — contact Metav Werkzeuge for tailored advice and direct supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 113-4-D-L-C2 GTIN: 8680731500967 Category: Toggle clamp Facts Holding force: 3650 N Clamping force: 3500 N Arm length: 141 mm Angle: 90° Weight: 0.94 kg Special features Material: galvanised steel Mounting: angled foot Safety locking mechanism Massive holding arm FAQ What clamping performance can be expected from this clamp? The Kukamet horizontal clamp 113 provides a holding force of 3650 N and a clamping force of 3500 N, ensuring secure fixation in common workshop fixtures. How is the clamp mounted in a fixture? Mounting is via an angled foot designed for bolting to benches, jigs or fixture plates; the 90° orientation simplifies integration into standard setups. Is the clamp suitable for continuous use in production? Yes, the galvanised construction and robust mechanics of the horizontal clamp 113 are intended for repetitive operation with low maintenance requirements. Does the clamp include a safety feature to prevent accidental release? A dedicated safety locking mechanism secures the clamp in the closed position, reducing the risk of unintended opening during handling or machining. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 141mm Horizontal Clamp With Solid Holding Arm, 3.65kN Holding Force - Kukamet
Take advantage of a combination of robust clamping force, a massive holding arm and a corrosion-resistant finish for reliable fixture performance and reduced maintenance. Order the Horizontal toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal toggle clamp »113« by Kukamet — 3,650 N holding force, galvanised finish The Horizontal toggle clamp »113« is a lever-operated horizontal clamp designed to secure workpieces at 90° in jigs, fixtures and assembly stations for consistent positioning and repeatable processing. Massive holding arm for high rigidity Holding force 3,650 N for secure clamping Galvanised finish for corrosion resistance Angled base (90°) with right-angle foot Consistent positioning for repeatable production Built for repetitive clamping cycles, the lever clamp delivers a holding force of 3,650 N, ensuring secure fixation and stable machining conditions. The massive holding arm reduces deflection under load, which translates directly into repeatable positioning and fewer rework cycles. For production environments where fixture reliability matters, the robust construction supports predictable process outcomes and improved throughput. Durable finish that minimises downtime A galvanised surface treatment provides a protective barrier against corrosion in workshop environments, reducing the need for frequent maintenance or replacement. The corrosion-resistant finish preserves the clamp’s functional surfaces and pivot points, maintaining clamping accuracy over time. This durability lowers lifecycle interruptions and helps sustain consistent production quality with minimal intervention. Compact integration with right-angle mounting The clamp’s right-angle foot and 90° orientation allow direct mounting to fixture plates and welding jigs, saving space while offering a secure attachment. The pivot arm measures 141 mm, providing a stable lever length for effective force transfer without excessive footprint. At approximately 0.915 kg, the unit is easy to position and retro-fit into existing tooling layouts, streamlining assembly and reducing integration time. For robust fixture solutions and further integration advice, contact Metav Werkzeuge in Emmerich — request a quotation for the Kukamet Horizontal toggle clamp 113 or consult our specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 113-4-D-C2 GTIN: 8680731500936 Brand: Kukamet Model: 113 Facts Arm length: 141 mm Holding force: 3,650 N Maximum pressing force: 3,500 N Angle: 90° Weight: 0.915 kg eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: right-angle foot Massive holding arm Lever-operated horizontal clamp Category: Spanner FAQ How much clamping force does the clamp provide? The Kukamet Horizontal toggle clamp 113 offers a holding force of 3,650 N and a maximum pressing force of 3,500 N for secure fixation in fixtures and jigs. Can the clamp be mounted on a right-angle fixture plate? Yes. The clamp features a right-angle foot for direct mounting at 90°, enabling compact integration into fixture plates and welding jigs. What finish protects the clamp in workshop environments? The clamp is supplied with a galvanised finish, which provides corrosion resistance and helps reduce maintenance requirements over time. What are the key dimensions and the SKU for ordering? Key dimensions: arm length 141 mm; weight 0.915 kg. SKU for ordering: 113-4-D-C2 (model 113). Is this clamp suitable for repetitive production use? Yes. The robust construction, massive holding arm and rated holding force make the clamp suitable for repetitive clamping cycles in production and assembly applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 143mm Horizontal Clamp With Massive Holding Arm, 850N/1000N Holding Force - Kukamet
The combination of a massive holding arm, a compact vertical foot and an 850 N clamping force delivers dependable, repeatable workholding for production and jig applications; order the Horizontal Toggle Clamp B112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal Toggle Clamp B112 — horizontal toggle clamp with 850 N clamping force and 143 mm arm (Kukamet) A Horizontal Toggle Clamp B112 engineered for secure fixture work, offering a robust holding arm and vertical mounting foot for compact jig layouts. Heavy-duty holding arm, 143 mm reach 850 N clamping force, 1000 N holding force Vertical mounting foot for compact fixtures Black-oxide finish for corrosion resistance Consistent clamping performance for reliable production The toggle device provides a repeatable clamping force that supports stable machining and assembly processes. With a rated 850 N clamping force and a maximum 1000 N holding capacity, the unit secures workpieces against movement during light to medium operations; this translates into fewer stoppages and more consistent cycle output. The 143 mm arm reach increases accessibility in fixtures while the lever mechanism converts manual input into a high locking force, making the assembly suitable for repetitive tasks on the shop floor. The explanation of clamping versus holding values clarifies that one figure refers to active closing force and the other to sustained retention under load. Space-saving mounting and robust finish for long service life Designed with a vertical foot for mounting, the clamp fits tight layouts where horizontal footprint must be minimised. The massive holding arm and robust construction resist bending and wear under frequent use, reducing the need for early replacement. A black-oxide finish offers basic corrosion protection and a matte appearance that integrates well into industrial fixtures. The compact weight of 0.155 kg keeps moving fixture mass low, supporting rapid manual handling and easier indexing in modular jigs. Overall, the mechanical simplicity of this clamping solution reduces maintenance and keeps downtime to a minimum. Quick integration into jigs with clear handling characteristics The 90° lock angle provides an unmistakable end position for visual and tactile confirmation of engagement, improving operator confidence during repetitive clamping cycles. As a horizontal clamp with lever action, installation is straightforward on plates or tooling blocks where a vertical mounting option is preferred. The model’s compact dimensions and reliable locking behaviour make it a practical choice for both custom fixtures and small-batch production stations. The product’s design emphasises secure workholding and fast operation, supporting improved throughput and safer handling in everyday shop applications. Contact Metav Werkzeuge today to specify Kukamet’s B112 horizontal toggle clamp for concise fixture solutions or to arrange tailored technical advice from our consultants at Metav Werkzeuge. Technical Data SKU: B112-1-D-C3 GTIN: 8680731507157 Brand: Kukamet Core specifications Clamping force: 850 N Holding force: 1000 N Arm length: 143 mm Lock angle: 90° Weight: 0.155 kg Mounting: vertical foot Materials & special features Finish: black-oxide finish Massive holding arm Model: 112 Category: Toggle clamp / Spanner FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal Toggle Clamp B112 offers a clamping force of 850 N and a maximum holding force of 1000 N for sustained retention under load. Can the clamp be mounted on a vertical or horizontal plate? Mounting is intended via the vertical foot; the clamp is suitable for attachment to plates or tooling blocks where a vertical mounting footprint is required. Is the arm length suitable for fixture work with medium-sized workpieces? The 143 mm arm provides extended reach for a variety of jigs and fixtures while maintaining compact overall dimensions for confined layouts. What surface treatment protects the clamp from corrosion? The device is supplied with a black-oxide finish that reduces corrosion risk and offers a subdued industrial appearance. How does the 90° lock angle benefit workshop use? The defined 90° lock position gives clear visual and tactile confirmation of engagement, aiding repeatability and operator safety. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 143mm Horizontal Clamp With Massive Support Arm And Safety Lock, Galvanised - Kukamet
Galvanised construction combined with a massive holding arm and a safety lock delivers reliable, repeatable clamping for jigs and fixtures. The compact 143 mm arm and 90° horizontal mounting allow straightforward integration into existing tooling. Order the Kukamet Horizontal clamp 111 via Metav Werkzeuge or contact our consultants for tailored application advice. Horizontal clamp 111 — Kukamet horizontal toggle clamp, galvanised, 90° A Horizontal clamp 111 engineered for secure, repeatable horizontal clamping in fixtures and jigs. Galvanised steel construction 1,000 N maximum holding force 850 N clamping force rating 90° horizontal orientation with 143 mm arm Consistent clamping that keeps production moving The horizontal toggle clamp delivers a measurable advantage in repeatability and process reliability. With a maximum holding force of 1,000 N and a rated clamping force of 850 N, the device separates the force that secures a workpiece from the force that applies pressure. This distinction reduces slippage under load and helps maintain part tolerances over long production runs. The result is fewer stoppages and a steadier output, which supports leaner workflows and predictable cycle times. Compact design for tight fixture layouts Space-conscious fixtures benefit from the clamp’s compact dimensions and light weight. The arm length of 143 mm and a slim profile make the unit suitable where clearance is limited, while the 90° orientation optimises use in horizontal jigs. At approximately 0.1 kg, the clamp contributes minimal mass to moving subassemblies and can be incorporated without adding undue inertia. These traits simplify integration into existing tooling and reduce time spent redesigning fixtures. Built to withstand workshop demands Constructed from galvanised steel, the clamp offers resistance to corrosion and prolonged service life in industrial environments. The massive holding arm increases mechanical stiffness, while the integrated safety lock prevents unintended release during handling or vibration. Together, these features lower maintenance frequency and improve operator confidence in repetitive tasks, supporting a safer, more durable clamping solution. Practical choice for jigs, fixtures and assembly benches This horizontal toggle clamp is well suited for general-purpose clamping in assembly, welding and inspection fixtures where a reliable, simple mechanical hold is required. The mounting on a horizontal base allows direct attachment to tooling plates and slotted fixtures. The Kukamet 111 offers a balance of robust mechanics and uncomplicated installation, making it an economical component for scalable fixture design. For secure, repeatable clamping in production, request the Kukamet Horizontal clamp 111 from Metav Werkzeuge—our consultants at info@metav-werkzeuge.com or +49 2822 7131930 can advise on integration and ordering. Technical data SKU: 111-1-D-L-C3 GTIN: 8680731505443 eCl@ss: 21041719 ETIM: EC011973 Manufacturer: Kukamet Core specifications Weight: 0.1 kg Arm length: 143 mm Clamping force (max): 850 N Holding force (max): 1,000 N Angle: 90° Materials and features Material: galvanised steel Mounting: horizontal base Massive holding arm Safety lock Datasheet: 111-112-113-l-katalogseite.pdf FAQ What forces are specified for this clamp? The Kukamet Horizontal clamp 111 is rated for a clamping force of 850 N and a holding force of 1,000 N, suitable for light to medium fixturing tasks. How is the clamp mounted in a fixture? Mounting is via a horizontal base; the clamp is designed for direct attachment to tooling plates and slotted fixture elements. Is the clamp suitable for use in corrosive environments? The clamp is made from galvanised steel, which provides enhanced corrosion resistance compared with untreated steel. Can this clamp be used for repetitive production cycles? Yes. The combination of a massive holding arm and a safety lock ensures repeatable performance and longevity in repetitive assembly or inspection applications. What is the product code for ordering? Ordering details: SKU 111-1-D-L-C3, GTIN 8680731505443. Use these codes when requesting the Kukamet horizontal toggle clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com