Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° 191mm Horizontal Clamp With Massive Holding Arm And Safety Lock, Zinc-Plated - Kukamet
Take advantage of the combination of a compact, galvanised design, a 191 mm solid holding arm and dependable clamping performance (up to 3,500 N) for smooth, repeatable fixturing in small to mid-size assemblies. Order the clamp directly via Metav Werkzeuge or consult the specialists for application support and rapid supply. Horizontal lever clamp 113 — horizontal clamp with 191 mm arm and safety lock The Horizontal lever clamp 113 is a compact industrial clamp designed for secure 90° mounting in jigs, fixtures and workstation fixturing for metalworking and general workshop use. Galvanised steel construction 191 mm solid holding arm 90° angle-foot mounting Safety lock with high holding force Consistent clamping performance that keeps production moving The 113 lever clamp delivers reliable clamping with a maximum clamping force of 3,500 N and a holding force of 3,650 N, ensuring workpieces remain stable during machining, welding or assembly. These figures describe the difference between applied clamp force and sustained holding capacity: the former refers to the maximum force exerted when the lever is actuated, the latter to the sustained resistance against displacement. The compact form factor and low mass (approx. 0.94 kg) mean this clamp integrates easily into existing fixtures without adding excessive dead weight, contributing to faster cycle times and reduced fixture inertia. Space‑saving design and quick setup for workshop efficiency A short 191 mm arm and a 90° angle‑foot mounting allow the clamp to be positioned close to the workpiece and mounted in tight toolrooms or fixture plates. The galvanised finish gives corrosion resistance for long service life in daily use, while the solid holding arm and smooth lever action reduce set‑up time and permit repeatable positioning. For operations that demand frequent changeovers or multiple clamping stations, the compact horizontal form decreases interference with tooling and cutting paths, supporting uninterrupted workflow and maximised machine uptime. Robust safety features and material compatibility for practical use Built with a massive holding arm and an integrated safety lock, the clamp reduces the risk of unintentional release during processing and provides secure retention for medium‑duty applications. The galvanised steel construction is suitable for general workshop environments and offers durable surface protection. As a lever clamp suited to fixture and jig applications, it performs well on a range of workshop tasks where a sturdy, manually actuated clamp is required; the combination of robust mechanics and a positive locking feature supports operator confidence and safer handling in daily production. For secure, repeatable fixturing with the Kukamet Horizontal lever clamp 113, contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: 113-4-D-L-C3 GTIN: 8680731500974 Brand: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 191 mm Maximum clamping force: 3,500 N Maximum holding force: 3,650 N Weight: 0.94 kg Mounting angle: 90° Special features Galvanised steel material Angle‑foot (Winkel‑foot) mounting Massive holding arm Safety locking mechanism Horizontal lever clamp design FAQ What is the maximum clamping force of this clamp? The Kukamet Horizontal lever clamp 113 offers a maximum clamping force of 3,500 N and a holding force of 3,650 N for secure retention during machining and assembly. Which mounting orientation is recommended for this model? The clamp is designed for 90° angle‑foot mounting, making it suitable for horizontal fixtures and jig plates where a compact footprint is required. Is the surface treated for corrosion resistance? Yes, the clamp features a galvanised steel finish that provides enhanced corrosion resistance for workshop environments. How heavy is the clamp and how does that affect fixture design? The clamp weighs approximately 0.94 kg, which keeps fixture deadweight low and simplifies handling during frequent changeovers. Does the clamp include a locking mechanism to prevent accidental release? The model includes a safety lock and a massive holding arm, offering a positive retention feature to prevent unintentional opening during operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 191mm Horizontal Clamp With Solid Holding Arm, 3.65kN Hold Force, Galvanised - Kukamet
Take advantage of a robust, zinc‑plated horizontal clamp that combines a massive holding arm, reliable clamping forces and compact installation to keep fixtures secure and processes uninterrupted. Order the clamp directly via Metav Werkzeuge or contact the consultants for technical advice and delivery options. Horizontal clamp 113 by Kukamet — zinc‑plated horizontal toggle clamp, 90° fixed angle The Horizontal clamp 113 secures workpieces at a 90° angle with a massive holding arm and zinc‑plated finish for reliable workshop and jig use Massive holding arm for secure clamping Zinc‑plated corrosion‑resistant finish 90° fixed angle for consistent positioning Holding force 3,650 N and clamping force 3,500 N Faster, repeatable clamping that reduces set‑up time The horizontal toggle provides consistent locking behaviour so cycle times are shortened and rework is reduced. With a high holding force and repeatable kinematics, the clamp maintains the same pressure every cycle, improving machining accuracy and operator confidence. The mechanical design enables quick manual actuation while stabilising the workpiece during light to medium operations, translating into measurable efficiency gains on production benches and assembly jigs. Built for longevity: corrosion resistance and sturdy construction Corrosion protection and robust components extend service life in busy workshops. The zinc‑plated surface slows surface degradation in humid or mixed‑use environments, while the massive arm resists bending and wear during repeated clamping. The solid construction means fewer replacements and lower maintenance overheads compared with lighter, stamped alternatives, supporting a reliable toolroom inventory and long‑term cost control. Compact mounting and versatile fixture integration A compact footprint and angle‑base mounting suit confined fixtures and retrofit applications, allowing secure installation without extensive rework of existing jigs. The 90° fixed orientation and a 191 mm arm length make the clamp suitable for repeatable edge and face clamping tasks. Lightweight assembly and standard mounting holes simplify retrofitting into existing assemblies; if uncertain whether this variant fits a specific fixture, technical advisors can clarify compatibility and suggest alternatives. Practical benefits for everyday workshop use The clamp delivers pragmatic advantages: faster throughput, safer workholding and dependable repeatability under routine loads. Thanks to the compact design and clear mechanical limits, setup errors are reduced and operator training time is minimised. Combined with supply reliability and product screening from Metav, this toggle clamp supports uninterrupted operations and predictable tool performance in both small workshops and larger production environments. Contact Metav Werkzeuge for tailored advice, fast supply and secure sourcing of Kukamet horizontal clamps to match production requirements Technical data Article number: 113-4-D-C3 GTIN: 8680731500943 Model: 113 Brand: Kukamet Core specifications Arm length: 191 mm Angle: 90° Clamping force: 3,500 N Holding force: 3,650 N Weight: 0.98 kg Materials & features Zinc‑plated material Massive holding arm Mounting: angle foot Suitable for lever‑type clamping (toggle clamp) eClass: 21041719 ETIM: EC011973 FAQ What maximum clamping force does this clamp provide? The Kukamet horizontal clamp 113 provides a clamping force of 3,500 N and a holding force of 3,650 N (SKU 113-4-D-C3) for secure workpiece retention in typical jigging and assembly tasks. Is the surface protected against corrosion? Yes, the clamp is zinc‑plated, which provides enhanced corrosion resistance for workshop environments and helps extend the component's service life. Can the clamp be fitted to existing fixtures with limited space? The compact design and angle‑foot mounting allow straightforward integration into constrained fixtures; the 191 mm arm length offers reach while keeping the overall footprint small. Which applications suit this type of toggle clamp? The device is suited to repetitive clamping tasks such as assembly jigs, light machining and inspection fixtures where a 90° fixed clamp orientation and reliable repeatability are required. Is the clamp durable under frequent use? Constructed with a massive holding arm and robust zinc plating, the clamp is designed for repeated operation with minimal deformation and predictable clamping behaviour. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2000 N Pneumatic Clamp With Massive Hold Arm, Galvanised - Kukamet
Combine the robust 167 mm arm, galvanised construction and up to 2,500 N holding force to secure fixtures reliably and reduce setup times. Benefit from rugged pneumatic actuation and vertical-foot mounting for rapid, repeatable clamping — order the clamp directly via Metav Werkzeuge or consult the specialists for integration advice. Kukamet 651 Pneumatic Toggle Clamp – 2,500 N holding force, 167 mm arm The 651 is a pneumatic toggle clamp engineered for repetitive production clamping and jigs, delivering quick actuation and a 90° clamping angle with vertical-foot mounting for secure bench or fixture integration. Robust 167 mm holding arm Galvanised corrosion protection 2,500 N maximum holding force Vertical-foot mounting, 90° clamping angle Reliable high-force clamping for production environments The pneumatic toggle clamp provides consistent, measurable clamping performance that supports efficient machining and assembly. With a maximum holding force of 2,500 N and an actuation capacity up to 2,000 N, the device ensures workpieces remain immobile during secondary operations. The long 167 mm arm increases lever reach for deeper engagement while the massive holding arm construction minimises deformation and deflection under load. This combination reduces rework and improves process capability by lowering positional variation in fixtures. Technical distinctions such as the difference between actuation force and holding force are important: the pneumatic drive generates the actuation input, whereas the mechanical toggle multiplies this into a higher, sustained clamping load, delivering secure fixation without overloading the actuator. Designed for durability and straightforward integration into fixtures Corrosion resistance and robust mounting options extend service life and simplify installation. The clamp is finished in galvanised steel to resist workshop environments and maintain reliable surface properties over time. A vertical-foot mounting plate allows direct attachment to t-slots, plates or fixture bases, while the 90° clamping angle provides a low-profile solution for vertical or horizontal tooling arrangements. The reinforced arm and welded components are specified for industrial use, translating into lower maintenance frequency and predictable lifetime costs. Where space and alignment matter, the clamp’s defined geometry reduces the need for additional support hardware, saving assembly time and enabling compact fixture layouts. Fast, controllable actuation that improves throughput Pneumatic actuation delivers short cycle times and repeatable motion, making the clamp suitable for automated and semi-automated lines. The toggle mechanism converts compressed-air input into a secure clamping position quickly and with minimal operator effort, supporting higher cycle counts and reduced takt times. The massive holding arm and mechanical interlock improve safety against accidental release during vibration or shocks common in production. Integration with pneumatic control valves and simple exhaust-line fittings allows easy commissioning. For teams refining process flow, the unit’s predictable behaviour under varying air pressures enables straightforward tuning of clamp timing and sequencing to match downstream operations. For robust, high-force clamping from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and supply solutions. Technical data Article number: 651-3-D-C3 GTIN: 8682843521649 Model: 651 Brand: Kukamet Facts Arm length: 167 mm Maximum actuation force: 2,000 N Maximum holding force: 2,500 N Clamping angle: 90° Special features Galvanised steel Vertical-foot mounting Massive holding arm Pneumatic actuation Category: Clamp ECLASS: 21021004 ETIM: EC011973 FAQ What is the difference between the actuation force and holding force? The actuation force refers to the pneumatic input capacity (2,000 N) that drives the mechanism; the holding force is the effective clamping result (2,500 N) achieved through the toggle mechanics of the 651 pneumatic clamp. Can the clamp be mounted on standard t-slot plates? Yes, the 651 is supplied with a vertical-foot mounting arrangement suitable for attachment to t-slot plates and fixture bases, enabling straightforward integration into standard tooling setups. Is the clamp suitable for repetitive, high-cycle production? The pneumatic actuation and reinforced construction of this toggle clamp are designed for frequent cycling in production environments, offering fast actuation and long service life under typical workshop conditions. What materials and environments is the clamp prepared for? Finished in galvanised steel, the clamp resists corrosion in general workshop atmospheres and is intended for robust industrial use where durability and surface protection are required. How does the 167 mm arm affect clamping applications? The extended arm reach facilitates deeper engagement and improved leverage in fixtures, allowing secure clamping of larger or irregularly positioned workpieces while maintaining mechanical stiffness. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2000 N Pneumatic Clamp With Massive Holding Arm, Zinc Plated, Vertical Base - Kukamet
Take advantage of a robust pneumatic clamping solution that combines high holding force, corrosion-resistant galvanised construction and compact installation for reliable fixture performance; order via Metav Werkzeuge or request advice from our consultants to ensure the right configuration for the application. Pneumatic Clamp 651 by Kukamet — Vertical‑foot mounting, 67 mm arm, 90° The Pneumatic Clamp 651 is a compact pneumatic hold‑down clamp designed for fixture and jig applications where consistent 90° clamping and a vertical‑foot mounting are required. Pneumatic actuation for fast cycle times 2500 N holding force for secure clamping Galvanised finish resists corrosion Massive holding arm for high rigidity Reliable clamping for repetitive production The unit delivers repeatable clamping through pneumatic actuation that converts compressed air into controlled linear force, making it suitable for medium‑ to high‑volume assembly and machining operations. With a 67 mm arm and a defined 90° clamping angle, the device secures workpieces with minimal setup variation, reducing rework and downtime. The combination of actuation and mechanical design supports consistent part positioning, which is essential for automated or semi‑automated lines seeking measurable process stability. Strong hold and structural durability Engineered with a massive holding arm and a maximum holding capacity of 2500 N, the clamp ensures firm fixation even under lateral loads. The quoted actuation force of 2000 N provides an efficient transfer into the clamping element; the result is a high clamping force relative to footprint. The galvanised material offers a maintenance‑friendly surface that slows corrosion, preserving clamping geometry and service life in workshop environments where exposure to coolant or ambient humidity occurs. Compact mounting that integrates with fixtures Vertical‑foot mounting facilitates low‑profile installation at the edge of jigs or on fixture plates without compromising base‑plate access. The compact construction supports close part spacing and efficient use of workbench real estate. Where tooling designers need to maintain a clear tool path or integrate sensors and tooling stops, the vertical mounting and short arm length deliver installation flexibility while keeping the clamping vector predictable for process planning. Operational benefits and application guidance The clamp is suited to metalworking and general workshop environments that require secure, repeatable holds—examples include assembly, welding tacks, and secondary machining operations. The simple pneumatic control enables integration with common valve systems and PLC logic to achieve fast cycle times and safe interlocks. For users less familiar with pneumatic sizing, specifying supply pressure and valve response will determine cycle speed; the clamp’s mechanical data support straightforward system engineering and predictable performance. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Kukamet Pneumatic Clamp 651 (SKU 651-3-D-C1) for reliable, high‑force clamping in production environments — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data SKU: 651-3-D-C1 eClass: 21021004 ETIM: EC011973 Numbers / Core technical data Arm length: 67 mm Max actuation force: 2000 N Max holding force: 2500 N Clamping angle: 90° Design / Special features Vertical‑foot mounting Massive holding arm Galvanised finish Pneumatic actuation Category: Clamps (Spanner) FAQ What is the maximum holding force of this clamp? The Kukamet Pneumatic Clamp 651 offers a maximum holding force of 2500 N, suitable for secure fixation in many workshop and light industrial applications. How is the clamp mounted to a fixture plate? Mounting is by a vertical‑foot arrangement designed for secure installation at the edge of jigs or on fixture plates, enabling compact placement and clear tool paths. Is the surface treated to resist corrosion? Yes, the clamp is supplied with a galvanised finish that improves resistance to corrosion and supports longer service life in damp or coolant‑exposed environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2000 N Pneumatic Clamp With Vertical Handle And Massive Arm, Galvanised - Kukamet
Combine a galvanised body with a 90° orientation and a vertical handle to achieve secure, repeatable clamping with up to 2,500 N holding force; order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. 651 Pneumatic clamp — vertical handle, galvanised construction, 90° orientation by Kukamet The 651 pneumatic clamp is a vertical-foot, right-angle clamping solution designed for fixture plates, jigs and automated workholding where compact, reliable clamping is required. Vertical handle for compact control Galvanised body for corrosion resistance 90° orientation for right-angle fixturing 2,500 N clamping force Reliable clamping performance for production use The unit delivers a consistent 2,500 N holding force with an actuation capacity of 2,000 N, providing a clear safety margin for medium-duty workholding. Pneumatic actuation enables fast cycle times and repeatable strokes, which reduces variability in batch production and supports stable machining results. The technical difference between actuation force and holding force is useful in design: actuation describes the force applied by the cylinder, while holding force indicates the maximum secure clamping load once the clamp is engaged. This separation ensures planners can size the actuator and supply pressure appropriately while preserving workpiece integrity. Built to last in demanding workshop environments Constructed from galvanised steel with a massive holding arm, the clamp resists corrosion and mechanical wear in industrial settings. The robust design minimises deflection under load and extends service life in repetitive production tasks. A compact arm length of 67 mm reduces intrusion into the workspace while still providing ample reach to secure components. The vertical-foot mounting simplifies integration into fixture plates and tooling blocks, allowing secure bolting and straightforward alignment in existing setups. Simple integration into automated cells and jigs Designed for a 90° clamping orientation, the clamp is suited to right-angle fixtures and pallets where space is constrained. The pneumatic mechanism and vertical handle allow reliable actuation from standard compressed-air supplies, enabling direct connection to solenoid valves and pneumatic control lines. The compact footprint and clear mechanical function make the component appropriate for retrofit projects and new automation designs alike, reducing engineering time for layout and signalling. Where cycle consistency matters, pneumatic actuation contributes to predictable process timing. Practical advantages for maintenance and workshop use The solid construction and straightforward mounting reduce the need for frequent adjustments, delivering low operational downtime. The vertical handle and accessible mounting points allow quick installation and inspection during routine checks. The absence of complex electronic control on the clamping unit itself keeps maintenance tasks mechanical and tangible, while the physical design supports easy replacement of wear parts when required. Technical documentation supplied with the component can be referenced during commissioning to confirm torque settings and mounting geometry. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 651 pneumatic clamp into fixtures and automated cells — eMail info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultancy and supply options Technical data Article number: 651-3-H-D-C1 Manufacturer: Kukamet Facts Arm: 67 mm Max actuation force: 2,000 N Max holding force: 2,500 N Angle: 90° Mounting: vertical foot SKU: 651-3-H-D-C1 ECLASS: 21021004 ETIM: EC011973 Special features Galvanised material Vertical handle Massive holding arm Right-angle (90°) clamping orientation Senkrechter Fuß (vertical foot) mounting FAQ What clamping capacity does this unit provide? The Kukamet 651 pneumatic clamp provides a holding force of up to 2,500 N, with an actuation force of 2,000 N specified for sizing the pneumatic supply. Is the clamp suitable for automated production cells? Yes, the pneumatic actuation and compact 90° orientation of the clamp make it well suited for integration into automated fixtures and pallet systems. What material is the clamp made from and how does that affect durability? The clamp is galvanised, which improves corrosion resistance and contributes to longer service life in workshop environments. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot arrangement that secures the unit to the fixture plate, providing a compact and stable attachment for right-angle clamping setups. Can the clamp reach into tight spaces while maintaining stability? With a 67 mm arm and a massive holding arm design, the clamp offers a balance of reach and rigidity suitable for constrained tooling areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2000 N Pneumatic Clamping Arm, Massive Hold Arm, Zinc-Plated, 2500 N Hold Force - Kukamet
Benefit from a robust clamping solution that combines a massive holding arm, a vertical-foot base and a galvanised finish for reliable performance on production jigs. With a maximum holding force of 2,500 N and an actuation force of 2,000 N, the unit secures workpieces consistently; order the Pneumatic clamp 651 via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic clamp 651 — vertical-foot design with massive holding arm (Kukamet) The Pneumatic clamp 651 is a vertical-foot clamping device engineered for secure, repeatable workpiece fixation in jigs, fixtures and assembly lines. Massive holding arm for high rigidity Vertical-foot mounting for compact fixtures Holding force up to 2,500 N Galvanised finish for corrosion resistance Secure clamping that keeps production moving The unit delivers consistent holding force through pneumatic actuation, providing a measurable improvement in process stability. The combination of a massive holding arm and a vertical-foot mounting reduces vibration and movement during machining and assembly, which decreases rework and scrap rates. The design supports a clear clamping angle of 90°, ensuring that forces are applied in a controlled direction for repeatable results on jigs and fixtures. Durable construction for long service intervals Constructed with a galvanised finish, the clamp resists corrosion in workshop environments and maintains surface quality over time. The robust arm, specified at 117 mm, minimises deflection under load and extends service intervals by protecting critical contact points. These features translate into lower maintenance downtime and predictable component life, helping to sustain throughput without unexpected interruptions. Fast integration into existing setups The vertical-foot configuration simplifies mounting to plates and tooling plates where space is limited. Pneumatic actuation offers rapid cycle times and straightforward control integration with standard compressed-air systems. The design's maximum actuation force of 2,000 N pairs with the high holding capacity to provide an efficient clamp cycle that is compatible with automated and manual workstations alike. Versatile application across production tasks Engineered for general clamping duties within industrial workshops, the device suits a range of fixturing tasks that demand secure fixation and quick release. The unit’s properties make it appropriate for repetitive assembly, light machining and inspection fixtures where a reliable mechanical interface is required. The compact footprint and standard pneumatic control allow for straightforward adaptation into existing tooling concepts. For heavy-duty clamping requirements, contact Metav Werkzeuge to specify the Kukamet Pneumatic clamp 651 (SKU 651-3-D-C2) for production use or to request tailored technical guidance — Metav Werkzeuge GmbH, info@metav-werkzeuge.com, +49 2822 7131930. Technical data Article number: 651-3-D-C2 Manufacturer: Kukamet Designation: Pneumatic clamp 651 ECLASS: 21021004 ETIM: EC011973 Core technical data Maximum holding force: 2,500 N Maximum actuation force: 2,000 N Arm length: 117 mm Clamping angle: 90° Special features Vertical-foot mounting Massive holding arm Galvanised material Category: Spanner / Pneumatic clamp FAQ What maximum holding force does the clamp provide? The Kukamet Pneumatic clamp 651 offers a maximum holding force of 2,500 N, providing secure fixation for many fixturing tasks. How is the clamp mounted to a fixture? Mounting is via the vertical foot, which is designed for direct attachment to tooling plates and compact fixture bases. What actuation method is used and what force is required? The device uses pneumatic actuation with a reported maximum actuation force of 2,000 N, suitable for integration with standard compressed-air systems. Is the clamp suitable for harsh workshop environments? Yes; the galvanised finish provides enhanced corrosion resistance, increasing longevity in typical workshop conditions. Which applications are typical for this type of clamp? Typical uses include jigs, fixtures, assembly stations and light machining setups where reliable, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2000N Pneumatic Clamp With Vertical Handle And Massive 117mm Arm, Zinc Plated - Kukamet
Take advantage of robust pneumatic actuation, a vertical handle and a massive holding arm for dependable 90° workholding; the combination of clear force ratings and galvanised construction ensures consistent production performance. Order the unit directly via Metav Werkzeuge or consult Metav's specialists for integration advice. 651 Pneumatic clamp — vertical-handle toggle clamp with 90° mounting (Kukamet) 651 is a pneumatic toggle clamp intended for secure 90° fixture mounting in production and assembly environments, offering a compact 117 mm arm and galvanised construction for long-term service. Vertical handle for upright operation Massive holding arm for high rigidity Up to 2,500 N holding force Galvanised corrosion protection High clamping force for precise, repeatable holds The pneumatic mechanism delivers a defined actuation force of 2,000 N, which in combination with the clamp geometry produces a holding force of 2,500 N. This ratio of actuation to holding force ensures reliable workpiece retention during machining, assembly or testing cycles. By using pneumatic power for the closing motion, the device offers fast, consistent clamping action and reduced operator variability. The measured force values provide a verifiable basis for fixture design and allow planners to calculate safety margins and cycle loads with confidence. Durable construction that reduces maintenance and downtime Constructed in galvanised material and fitted with a massive holding arm, the clamp is engineered for resilience in daily industrial use. The vertical handle and vertical foot mounting create a compact footprint and simplify integration into benches and jigs where space is limited. The 117 mm arm provides a balance between reach and rigidity, reducing deflection under load. Galvanising delivers corrosion resistance to extend service life in humid or workshop environments, reducing the need for frequent replacement and lowering lifecycle costs. Designed for fast integration and consistent throughput This toggle clamp supports quick installation into existing fixtures and is suitable for series production where reliable repeatability and short cycle times matter. The 90° orientation makes it a practical choice for perpendicular clamping tasks and indexing stations. With clear specification data and a compact form factor, the clamp simplifies fixture engineering and shortens commissioning. The supplied SKU (651-3-H-D-C2) and technical ratings aid purchasing and inventory processes, while the robust design contributes to fewer interruptions in the production flow. For specification support or to arrange supply of the Kukamet 651 pneumatic clamp (SKU 651-3-H-D-C2), contact Metav Werkzeuge for expert advice and rapid delivery from Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 651-3-H-D-C2 Brand: Kukamet eClass: 21021004 ETIM: EC011973 Facts Arm length: 117 mm Actuation force: 2,000 N Holding force: 2,500 N Angle: 90° Special features Vertical handle Massive holding arm Vertical foot mounting Galvanised material Robust toggle mechanism FAQ What maximum holding force does the clamp provide? The clamp achieves a holding force of up to 2,500 N as specified for the Kukamet 651 pneumatic clamp (SKU 651-3-H-D-C2). What is the actuation force required for the pneumatic mechanism? The pneumatic actuation is specified at 2,000 N, which produces the rated holding performance for the 651 clamp. How is the clamp mounted to a fixture? Mounting is by a vertical foot, designed for 90° orientation to integrate into perpendicular fixture setups. What materials and surface treatment are used? The clamp is supplied in a galvanised finish with a massive holding arm for improved corrosion resistance and structural stability. Which reference should be used when ordering or specifying this clamp? Use the SKU 651-3-H-D-C2 and the Kukamet 651 pneumatic clamp designation when ordering or requesting technical documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 200mm Horizontal Clamp With Massive Holding Arm, 3.65kN Hold Force, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that combines a 200 mm reach, a massive holding arm and up to 3.5 kN clamping force for dependable fixture work. Order the clamp through Metav Werkzeuge or consult our specialists for application‑specific advice. Horizontal Clamp 112 by Kukamet — 200 mm reach, 3.5 kN clamping force Horizontal Clamp 112 is a sturdy, galvanised horizontal clamp for secure workpiece holding in assembly, welding and fixture applications Massive holding arm for enhanced stability Galvanised construction for corrosion resistance 200 mm reach for versatile clamping positions 3.5 kN clamping force, 3.65 kN holding capacity Built for endurance and steady clamping The clamp’s galvanised finish and massive holding arm deliver a durable solution for repetitive production tasks where resistance to corrosion and mechanical stress matter. The robust construction reduces deformation under load and keeps clamping geometry consistent over time, which supports repeatable setups and lowers rework rates. The combination of a reinforced arm and a vertical base provides a stable interface for jigs and fixtures, helping maintain alignment during welding or machining. Measured performance for reliable process integration With a reach of 200 mm and a rated clamping force of 3.5 kN (holding capacity 3.65 kN), the unit supplies predictable holding power for medium‑duty operations. These figures enable planners to select an appropriate clamp based on quantified load requirements rather than estimation. The compact weight of 0.844 kg and the 90° orientation make it suitable for confined fixtures and modular tooling plates, simplifying integration into existing production cells and reducing cycle‑time impact. Easy mounting and long‑term operational benefits The vertical foot mounting allows secure attachment to workbenches, fixtures or weldments without complex adapters. The galvanised surface reduces maintenance frequency and extends service life in humid or workshop environments. Where repeated clamping is required, the solid arm construction minimises wear and preserves clamping accuracy, supporting consistent quality and lower total cost of ownership over many production cycles. Contact Metav Werkzeuge for tailored mounting options or to discuss the Horizontal Clamp 112 for specific fixture designs — expert advice and fast, reliable supply from our Emmerich location Technical Data SKU: 112-4-D-C3 GTIN: 8680731500592 Manufacturer: Kukamet Category: Spanner Key Figures Weight: 0.844 kg Arm length: 200 mm Maximum clamping force: 3,500 N Maximum holding force: 3,650 N Angle: 90° eCl@ss: 21041719 ETIM: EC011973 Features & Versions Galvanised finish Vertical foot mounting Massive holding arm Category: horizontal clamp Storytrigger: lever clamp (hebelspanner) FAQ What is the primary application for this horizontal clamp? The Horizontal Clamp 112 is designed for secure workpiece holding in assembly, welding and fixture applications where a compact, robust clamp with corrosion protection is required. Can the clamp be mounted on custom jigs and fixtures? Yes, the vertical foot mounting enables secure attachment to benches, fixture plates or custom jigs; the 200 mm reach helps position the clamping force where needed. What materials is the clamp suitable for? The clamp is a general‑purpose horizontal clamp; suitability depends on the workpiece and clamping requirements — the galvanised construction ensures durability in workshop environments. How much clamping force does the unit provide? Rated clamping force is 3,500 N with a maximum holding capacity of 3,650 N, giving quantifiable performance for fixture planning and safety margins. Is special maintenance required to preserve performance? Routine inspection and cleaning keep the clamp reliable; the galvanised finish reduces corrosion and maintenance frequency, while the massive arm design minimises wear. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 200mm Horizontal Clamp With Solid Holding Arm, 3.65 kN Holding Force, Galvanised - Kukamet
Take advantage of the combination of a massive holding arm, zinc-plated durability and a compact 200 mm reach to secure workpieces reliably on fixtures; order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. 111 Horizontal clamp by Kukamet — zinc-plated toggle clamp with 3650 N holding force The 111 horizontal clamp is a compact horizontal toggle clamp designed for secure, repeatable workpiece holding in jigs, fixtures and light assembly lines. Massive holding arm 3650 N maximum holding force Zinc-plated steel construction 200 mm reach with horizontal foot Reliable clamping that keeps production moving The clamp delivers a consistently high holding force of 3650 N and a maximum clamping force of 3500 N, which translates into dependable fixation during loading, machining or inspection. The robust, heavy-duty arm reduces the risk of slippage under transverse loads, and the horizontal mounting foot makes it straightforward to fit into existing jigs. For production planners, this means fewer rejects and less rework because components remain stable during processing. Built for durability and simple integration Constructed from zinc-plated steel, the unit resists corrosion in workshop environments and keeps maintenance requirements low. The straightforward toggle mechanism requires minimal adjustment once aligned, enabling quick cycle times and reduced setup effort. A 200 mm reach provides improved access where space is constrained, while the compact form factor allows multiple clamps to be positioned closely on fixtures, improving workholding flexibility without increasing footprint. Practical performance data for workshop use The device combines compact weight (0.847 kg) with a massive holding arm design to deliver high clamping performance without unnecessary bulk. The 90° arm angle is suited to conventional fixture geometries and reduces interference with neighbouring tooling. Because the clamp is zinc-plated and mechanically simple, routine inspection consists mainly of visual checks and occasional lubrication, which supports continuous operation with predictable maintenance intervals. Select Kukamet quality for robust, repeatable clamping and contact Metav Werkzeuge in Emmerich for tailored advice and order support — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 111-4-D-C3 GTIN: 8680731500257 eClass: 21041719 ETIM: EC011973 Core specifications Weight: 0.847 kg Arm length (reach): 200 mm Maximum clamping force: 3500 N Maximum holding force: 3650 N Angle: 90° Materials & special features Material: zinc-plated steel Mounting: horizontal foot Special feature: massive holding arm Category: Spanner Manufacturer: Kukamet FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 3650 N, suitable for secure fixation in many light to medium-duty jigs and fixtures. Can the clamp be mounted on existing fixture plates? Yes, the horizontal foot mounting is compatible with standard fixture plates and is intended for easy integration into jigs and tooling. Is the surface finish suitable for humid workshop environments? The zinc-plated steel finish offers corrosion resistance appropriate for typical workshop and assembly settings. What is the effective reach of the clamp arm? The clamp has a 200 mm arm reach, giving improved access for parts positioned away from the mounting base. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 200mm Horizontal Clamp With Solid Holding Arm, 3.65kN Holding Force - Kukamet
Take advantage of a robust lever design, high clamping force and compact footprint for reliable fixture clamping; order the horizontal clamp directly via Metav Werkzeuge or ask their consultants for application advice. Horizontal clamp 112 — Kukamet, 200 mm lever, up to 3,650 N holding force Horizontal clamp 112 secures workpieces in horizontal jigs and fixtures with a solid lever arm and a vertical-foot mount for stable attachment in production and workshop environments. Massive solid holding arm 200 mm lever for extended reach Clamping force up to 3,500 N Vertical-foot mounting for stability Fast, reliable clamping for repetitive production The horizontal clamp offers an immediate solution for repeatable holding tasks: its lever geometry converts operator action into a consistent clamping force of up to 3,500 N, while the maximum holding force is 3,650 N, ensuring components remain fixed during machining, assembly or inspection. This consistent performance reduces setup variation and the need for rework, so cycle times remain predictable. The mechanism is designed for fast engagement and disengagement, supporting lean workflows in small-batch and series production alike. Robust construction that stands up to workshop use Built with a massive solid holding arm and a durable blackened finish, the clamp withstands abrasive and oily shop conditions without appearing corrosive at first signs of use. The vertical-foot mounting provides a secure base that minimises vibration transfer to the workpiece and fixture plate. At a weight of 0.844 kg, the device balances rigidity with a compact footprint, allowing integration into existing jigs without significant strengthening of carrier plates or tooling plates. Practical integration and straightforward handling Designed as a horizontal lever clamp suitable for fixtures, the device fits into manual and semi-automatic assemblies where a right-angle clamping action is required (90° actuation). The extended 200 mm arm provides added reach for clamping over obstructed or uneven surfaces, while the toggle-style action keeps the arm locked under load for safe handling. For workshop engineers and maintenance planners, the unit simplifies fixture design and supports repeatable quality control in assembly and light machining operations. For secure, high‑force horizontal clamping from a trusted partner, contact Metav Werkzeuge for Kukamet products — Metav IndustryLine supplies and supports this clamp; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical advice and ordering. Technical data Article number: B112-4-D-C3 GTIN: 8680731507300 Model: 112 Facts Arm length: 200 mm Clamping force (max): 3,500 N Holding force (max): 3,650 N Angle: 90° Weight: 0.844 kg Special features Massive holding arm Vertical-foot mounting Blackened finish Horizontal toggle/lever clamp Category: Clamps FAQ What clamping force can be expected from this clamp? The clamp provides a clamping force of up to 3,500 N and a holding force of 3,650 N as specified for the Kukamet horizontal clamp 112. How is the clamp mounted to a fixture plate? Mounting is by a vertical-foot arrangement that secures the clamp to the fixture plate for stable, low-vibration clamping. Is the lever arm suitable for obstructed workpieces? Yes, the 200 mm lever gives extended reach for clamping over partially obstructed components and uneven surfaces. What surface treatment does the clamp have and why does it matter? The unit has a blackened finish which offers basic protection against wear in workshop environments and helps to reduce visible marks on the component support. Can this clamp be used in automated fixtures? The toggle-style mechanism and compact footprint make the clamp suitable for integration into manual and semi-automatic fixtures where horizontal clamping action is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 200mm Horizontal Clamp, Massive Holding Arm with Safety Lock, 3.65 kN Hold Force - Kukamet
Take advantage of robust clamping performance, a massive holding arm with safety lock and a compact design that simplifies fixture layout. Order the clamp directly via Metav Werkzeuge or contact the consultants for configuration advice. Horizontal clamp 112 — Kukamet — robust lever clamp with safety lock and 200 mm arm Horizontal clamp 112 is a lever-style horizontal clamp designed for secure workholding in jigs, fixtures and bench mounting where repeatable clamping and quick operation are required. Massive holding arm with safety lock 3,650 N maximum holding force 200 mm arm for extended reach Vertical foot for secure mounting Consistent clamping power to reduce rework and increase uptime The clamp delivers a high and reliable holding force—rated at 3,650 N—with a corresponding closing force of 3,500 N, providing stable fixation for machining, assembly and inspection tasks. High, measurable forces reduce part movement during operations, which lowers scrap rates and minimises repeat runs. The numeric ratings enable planners and engineers to calculate fixture safety margins and select the clamp where the force figures match the application requirements. For users familiar with clamping technology, these values indicate suitability for medium-duty production and repetitive handling environments. Robust construction and integrated safety for everyday workshop use A massive holding arm combined with an integrated safety lock ensures that the clamp remains secure under load and during process interruptions. The component is finished in a blackened finish, which offers basic corrosion resistance and a professional appearance on the shop floor. The supplied design features a vertical foot for bench or fixture mounting and a fixed 90° lever orientation, which supports compact layouts and straightforward mechanical integration. These construction details translate into predictable wear behaviour, easier inspection intervals and a longer service life compared with lightweight alternatives. Easy integration into jigs and fixtures with defined reach and compact mass With a 200 mm arm, the clamp provides additional reach for larger workpieces or for positioning behind obstructing components while keeping a modest mass of 0.73 kg, which simplifies balancing of moving subassemblies. The lever-action mechanism enables fast clamping and unclamping cycles, shortening process times and improving throughput when integrated into assembly lines or test rigs. Installation is simplified by the vertical foot mounting; the design is compatible with conventional fixture plates and can be secured with standard fasteners. Clear, quantitative values for arm length, forces and angle support straightforward CAD integration and process planning. Select the Kukamet 112 horizontal clamp for dependable, measurable clamping performance — contact Metav Werkzeuge for supply and technical assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B112-4-D-L-C3 Name: Horizontal clamp 112 Manufacturer: Kukamet Facts Arm length: 200 mm Max closing force: 3,500 N Max holding force: 3,650 N Weight: 0.73 kg Angle: 90° Special features Vertical foot mounting Massive holding arm Safety lock Blackened finish Lever-style horizontal clamp FAQ What clamping force can be expected from this clamp? The Kukamet horizontal clamp 112 offers a maximum holding force of 3,650 N and a closing force of 3,500 N, figures that support medium-duty fixturing and repetitive assembly tasks. Can the clamp be mounted to a workbench or fixture plate? Yes, the clamp features a vertical foot for secure mounting to bench tops or fixture plates using standard fasteners. Does the clamp include any safety mechanism to prevent accidental release? A built-in safety lock is integrated into the design to hold the lever in place under load and prevent unintended opening. What reach does the clamp provide for offset or recessed workpieces? The lever arm extends to 200 mm, giving improved reach behind obstructions and flexible placement within jigs and fixtures. Is the finish suitable for workshop environments? The blackened finish offers basic corrosion resistance and a durable surface for everyday workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 200mm Horizontal Toggle Clamp, Massive Arm And Safety Lock, Galvanised - Kukamet
Secure, repeatable clamping with a 200 mm solid arm and galvanised construction; benefit from up to 3,650 N holding force combined with a built-in safety lock for safe operation. Order the Kukamet horizontal toggle clamp 111 directly via Metav Werkzeuge or consult our team for application advice. Horizontal toggle clamp 111 — 200 mm arm, galvanised finish (Kukamet) The Horizontal toggle clamp 111 is a durable horizontal lever clamp designed for secure workholding in metalworking, assembly and general workshop applications. 200 mm solid holding arm Galvanised steel for corrosion resistance Horizontal base for easy bench mounting Safety locking mechanism for secure clamping Consistent clamping force for production environments The clamp delivers a reliable holding force of 3,650 N and a maximum operating thrust of 3,500 N, providing the mechanical certainty required for repetitive tasks. The lever mechanism converts operator effort into a firm, repeatable clamp action, which reduces repositioning and cycle time. Specified forces are a decisive factor when securing components for machining, drilling or welding; the numeric values enable straightforward selection against fixture requirements and process tolerances, ensuring the clamp meets production demands. Simple mounting and robust build minimise downtime Fitted with a horizontal base, this clamp is intended for easy bench or fixture mounting, allowing fast integration into jigs and assembly lines. The solid holding arm and galvanised finish offer resistance against mechanical wear and corrosion in busy workshop environments. A visible safety lock retains the clamp in the closed position, preventing accidental release during handling. These design choices reduce maintenance intervals and help maintain uptime, which supports steady throughput on the shop floor. Practical design that supports operator safety and versatility The 90° arm geometry and lever action enable secure engagement with a short operating stroke, making the clamp suitable where space is limited yet secure fixation is essential. The galvanised construction balances durability with affordability, delivering a corrosion-resistant surface without costly coatings. For fixtures that require quick manual clamping and dependable retention, this toggle clamp provides a compact, effective solution that fits standard workshop workflows while enhancing operator confidence through its locking feature. Contact Metav Werkzeuge for reliable supply and technical advice on the Kukamet horizontal toggle clamp 111 — email info@metav-werkzeuge.com or call +49 2822 7131930 to verify suitability and delivery from Emmerich Technical Data Article number: 111-4-D-L-C3 GTIN: 8680731500288 Manufacturer: Kukamet SKU: 111-4-D-L-C3 eClass: 21041719 ETIM: EC011973 Facts Arm length: 200 mm Holding force: 3,650 N Maximum thrust: 3,500 N Weight: 0.73 kg Clamping angle: 90° Special features Galvanised material Horizontal base mounting Solid/massive holding arm Safety locking mechanism Designed as a lever/lever-action clamp FAQ What holding force can be expected from this clamp? The Kukamet horizontal toggle clamp 111 provides a holding force of up to 3,650 N and a maximum thrust of 3,500 N, suited for medium-duty workholding. Which mounting method is used for installation? Mounting is via a horizontal base designed for bench or jig attachment, enabling straightforward integration into existing fixtures. Is the clamp suitable for corrosive workshop conditions? Yes, the galvanised finish of the clamp offers enhanced corrosion resistance for standard workshop environments. Can the clamp be used for repetitive machining operations? The lever mechanism and robust construction make the clamp well suited for repetitive tasks, offering consistent clamping and reduced repositioning time. What safety features are included? A mechanical safety locking mechanism secures the clamp in the closed position, preventing unintended release during handling or machining. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 200mm Pneumatic Clamp With Vertical Handle And Solid Arm, 3000N Push / 3300N Hold, Zinc-Plated - Kukamet
Benefit from 3.3 kN holding power, a massive zinc-plated arm and an ergonomic vertical handle for reliable, repeatable clamping in medium-duty production environments. Order the Pneumatic clamp 651 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic clamp 651 — Vertical handle, 3.3 kN holding force (Kukamet) Pneumatic clamp 651 is a workshop-grade pneumatic clamping device designed for secure fixturing at a 90° angle, suitable for assembly fixtures and production jigs. Vertical handle for easy operation Massive holding arm for stable clamping 3.3 kN maximum holding force Zinc-plated corrosion protection Consistent clamping force for dependable throughput The clamp delivers a maximum holding force of 3.3 kN, backed by a pneumatic operating force of 3,000 N, which supports consistent workholding across repeat cycles. This level of force reduces vibration and part movement during machining, leading to fewer rejects and less rework. The pneumatic actuation enables fast, uniform strokes for improved cycle times in repetitive tasks, while the clear separation between operating and holding forces contributes to predictable performance on the shop floor. Robust construction built for workshop conditions Constructed with a zinc-plated finish and a massive holding arm, the unit resists corrosion and mechanical wear in demanding environments. The solid arm and 90° orientation provide a stable reaction path, minimising deflection under load. These design choices extend service life and lower lifetime maintenance needs, delivering a durable clamping solution where longevity and reliability are priorities. Ergonomic layout and straightforward integration Featuring a vertical handle and a vertical foot mounting plate, the clamp is intended for installation at bench level or within fixture frames where space is limited. The 200 mm arm gives a practical reach for a wide range of workpieces without compromising stability. The vertical handle supports intuitive operation during manual loading, and the compact base simplifies positioning in modular fixtures or conveyor-based assemblies. Efficient for automated and manual workflows Thanks to pneumatic actuation and a lever-style concept, the clamp suits both semi-automated stations and manual assembly points. The design supports fast engagement and consistent clamping, promoting steady throughput and repeatable positioning. Integration into pneumatic control loops is straightforward, making it a practical choice for production lines that require dependable, medium-force clamping without complex control systems. Contact Metav Werkzeuge for application advice and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 651-4-H-D-C3 Model: 651 Product: Pneumatic clamp Brand: Kukamet Mounting: vertical foot Facts Maximum operating force: 3,000 N Maximum holding force: 3,300 N Arm length: 200 mm Angle: 90° ECLASS: 21021004 ETIM: EC011973 Special features Zinc-plated material Massive holding arm Vertical handle and solid holding arm Lever clamp design (hebelspanner) Material: Verzinkt FAQ What clamping force can be expected from this clamp? The Pneumatic clamp 651 offers a maximum holding force of 3,300 N and a pneumatic operating force of 3,000 N, providing reliable fixation for medium-duty applications. How is the clamp mounted in a fixture? Mounting is via a vertical foot; the clamp is designed for vertical-foot installation in bench fixtures or frame-mounted jigs. Which materials is the clamp suitable for handling? The clamp’s robust arm and zinc-plated finish make it suitable for typical workshop materials handled in assembly and light machining operations. Is the arm length sufficient for small to medium workpieces? With a 200 mm arm, the clamp provides practical reach for many small to medium components while maintaining stability under load. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 229mm Horizontal Clamp With Solid Holding Arm, 4 500 N Thrust / 5 000 N Hold - Kukamet
Benefit from a compact, heavy‑duty clamp that combines a 229 mm arm with a 5,000 N holding force and a robust blackened finish for dependable, repeatable workholding. Request tailored advice or place an order via Metav Werkzeuge for fast supply and local support. 111 horizontal clamp by Kukamet — 229 mm arm, 5,000 N holding force The 111 is a horizontal lever clamp designed for secure workholding in jigs, fixtures and production tooling where reliable repeatability and quick operation are essential 229 mm reach for extended clamping 5,000 N maximum holding force Robust blackened finish Horizontal-foot mounting at 90° Reliable clamp performance for production environments The lever design delivers a high holding force while remaining quick to operate, providing a dependable clamp for repetitive tasks. With a rated holding force of 5,000 N and a clamping force of 4,500 N, the unit ensures components are held securely during machining, assembly or inspection cycles. These measurable values support process planning and risk assessment in production lines, enabling planners to size clamps to the required safety margins and avoid slippage during operations. Durable construction that reduces downtime A massive holding arm and blackened finish create a combination of strength and surface protection that suits workshop conditions. The finish (blackened burnish) helps resist corrosion and conceal wear from regular handling, while sturdy arm construction limits deformation under load. A total weight of 1.58 kg balances robustness with ease of handling, keeping fixtures manageable during set-up and maintenance and reducing the need for frequent replacements. Space-saving mounting with precise positioning The clamp’s horizontal foot mounting and 90° angle are engineered for integration into fixtures where lateral clamping is required. The 229 mm arm gives extended reach for larger or offset workpieces without increasing the overall footprint of the jig, which supports compact station design and easier access for operators. The mounting style simplifies installation into standard plates or tooling blocks and supports repeatable positioning across multiple workstations. Fast operation and low-maintenance handling As a lever clamp in the toggle family, the mechanism enables quick engagement and release with clear tactile feedback, speeding up cycle times on assembly and machining processes. The simple mechanical design means routine upkeep is limited to periodic inspection and lubrication of pivot points rather than complex servicing. This straightforward maintenance profile contributes to consistent uptime and predictable lifecycle costs for production tooling. For procurement or technical integration of Kukamet clamping solutions, contact Metav Werkzeuge in Emmerich for expert advice and secure supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: B111-5-D-C3 GTIN: 8680731507096 Manufacturer: Kukamet Model: 111 Weight: 1.58 kg Facts Arm length: 229 mm Angle: 90° Holding force: 5,000 N Clamping force: 4,500 N Special features Mounting: horizontal foot Finish: blackened (brünierte Oberfläche) Massive holding arm Category: lever clamp / horizontal clamp eClass: 21041719 ETIM: EC011973 FAQ What is the maximum holding capacity of this clamp? The clamp provides a maximum holding force of 5,000 N; the rated clamping force is 4,500 N for the Kukamet 111 horizontal clamp (SKU B111-5-D-C3). Is the clamp suitable for integration into production fixtures? Yes. The horizontal-foot mounting and 90° orientation allow straightforward integration into jigs and fixture plates for repeatable positioning. What finish does the arm have and how does it affect durability? The arm has a blackened finish that improves corrosion resistance and conceals surface wear, supporting longer service intervals in workshop environments. How large is the working reach of the clamp? The working reach is provided by a 229 mm arm, which extends access to offset or larger workpieces while keeping the fixture compact. Does the clamp require special maintenance or tools? Maintenance is limited to routine inspection and lubrication of pivot points; no specialised tools are required for standard upkeep of the Kukamet lever clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 229mm Horizontal Clamp, Massive Holding Arm With Safety Lock, Zinc-Plated, 4.5kN Pressure - Kukamet
Take advantage of a compact, high-capacity clamp that combines robust holding power and secure locking for reliable fixture work. With a galvanised construction and a 229 mm arm, the unit supports repeatable positioning and reduced downtime; order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. 111 Horizontal clamp by Kukamet — galvanised lever clamp, 90° operation The 111 horizontal clamp is a lever-style horizontal clamp made for fixture and jig applications, offering strong static retention and a compact footprint for workshop and light industrial use. Galvanised construction for corrosion resistance 90° horizontal mounting for compact fixtures Up to 5,000 N holding force for secure retention Massive holding arm with safety lock Dependable clamping that increases process reliability The clamp delivers measurable performance through a clear separation of forces: a clamping force of 4,500 N establishes the working pressure applied by the lever, while a higher holding force of 5,000 N ensures parts remain secure when idle. These figures translate into fewer re-clamping cycles and more consistent production runs, which supports predictable cycle times and less rework. The 229 mm arm provides an extended reach for a range of fixture sizes while keeping the overall footprint small, making the device suitable where space is at a premium. Robust build quality that reduces maintenance needs Constructed from galvanised steel, the unit resists surface corrosion and maintains functional precision in demanding environments. The massive holding arm and integrated safety locking mechanism reduce the risk of accidental release during handling and machining. For operations that require long-term dependability, the mechanical simplicity of this lever clamp minimises wear points and supports straightforward replacement or refurbishment, helping to lower lifecycle costs and unplanned downtime. Simple integration for efficient fixture design Designed for horizontal mounting on a foot base at a 90° operating angle, the clamp integrates with standard fixture plates and jigs without specialised adaptors. Its light weight of 1.4 kg and compact form factor allow rapid positioning and mounting while still providing substantial holding capacity. The lever clamping principle means fast actuation and repeatable clamping cycles, which benefits setups that demand both speed and repeatability. Clear numerical data for arm length, forces and angle facilitates CAD integration and fixture planning. For secure, compact horizontal clamping from Kukamet, contact Metav Werkzeuge for tailored advice and availability; reach out to info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best configuration for specific fixtures Technical data SKU: 111-5-D-L-C3 GTIN: 8680731500363 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 229 mm Weight: 1.4 kg Clamping force max: 4,500 N Holding force max: 5,000 N Angle: 90° Special features Material: galvanised Mounting: horizontal foot Massive holding arm Safety locking mechanism Lever-style clamp FAQ What is the difference between clamping force and holding force? The clamping force refers to the active force applied by the lever (4,500 N) while the holding force (5,000 N) indicates the maximum static retention capability of the Kukamet 111 horizontal clamp after actuation. Is the clamp suitable for outdoor or humid workshop environments? Yes, the galvanised finish on the 111 horizontal clamp provides improved resistance to corrosion, making it suitable for humid workshop conditions; regular maintenance still extends service life. Can the clamp be mounted on custom fixture plates? The clamp is designed for horizontal foot mounting at 90°, which allows integration into custom fixture plates and jigs when correct mounting holes and clearances are provided. How compact is the clamp for tight fixture layouts? With a 229 mm arm and a total weight of 1.4 kg, the unit offers a compact footprint while delivering strong holding capacity, making it suited to space-constrained fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 229mm Horizontal Clamp, Massive Holding Arm, 4.5kN Press Force, 5kN Holding Force, Zinc-Plated - Kukamet
Take advantage of a massive holding arm, 5,000 N maximum holding force and a zinc-plated finish for reliable fixture performance in production and workshop environments. The robust design and compact footprint ensure consistent clamping at a 90° orientation; order directly via Metav Werkzeuge or consult our specialists for application advice. Horizontalspanner 111 — horizontal lever clamp with massive holding arm by Kukamet A Horizontalspanner 111 lever clamp designed for secure horizontal mounting in jigs and fixtures, offering a compact 229 mm arm and high clamping capacity for demanding assembly and production tasks. Massive holding arm for secure clamping 5,000 N holding force Zinc-plated body for corrosion resistance Horizontal foot mount, 90° angle Reliable clamping performance for demanding fixtures The Horizontalspanner 111 delivers consistent, reproducible clamping with a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, values that support stable workholding under repeated cycles. The lever mechanism has been designed to transfer force efficiently while reducing operator effort, which increases throughput and reduces fixture setup time. The compact mass and balanced geometry enable installation in confined jigs while maintaining secure contact pressure, contributing to improved process reliability and shorter downtime between operations. Easy integration and space-saving mounting A horizontal foot mounting configuration and a 229 mm arm length allow for flexible placement on fixture plates and machine tables. The clamp is supplied in a form that permits straightforward bolting to a flat surface, with a fixed 90° operating angle that simplifies positioning during fixture design. The unit’s modest mass of 1.58 kg reduces additional load on assemblies and makes handling and alignment easier during installation, while the robust construction supports long-term, low-maintenance operation. Durable finish and workshop suitability Constructed with a zinc-plated body and a massive holding arm, this horizontal lever clamp is built for workshop conditions where mechanical robustness matters. The surface finish gives basic corrosion protection, extending service life in industrial environments. The compact design and dependable clamping characteristics make the clamp well suited to repeated use in production jigs, assembly fixtures and manual workstations, where secure retention and quick action are priorities. Contact Metav Werkzeuge for an application assessment and fast supply from Emmerich—our consultants will advise on fixture integration and delivery options Technical data Article number: 111-5-D-C3 GTIN: 8680731500332 SKU: 111-5-D-C3 Core specifications Max holding force: 5,000 N Max clamping force: 4,500 N Arm length: 229 mm Weight: 1.58 kg Angle: 90° Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Category: clamp FAQ What holding force does the clamp provide? The Horizontalspanner 111 from Kukamet provides a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N (SKU 111-5-D-C3). How is the clamp mounted in a fixture? Mounting is via a horizontal foot; the clamp is designed for bolting to a flat surface and operates at a fixed 90° angle for straightforward integration. What is the arm length and overall mass? The lever arm extends 229 mm and the unit weighs 1.58 kg, allowing compact installation without excessive added mass. Is the clamp suitable for repeated production use? Yes, the zinc-plated body and massive holding arm are intended for regular operation in production jigs and workshop fixtures where reliable retention is required. Which brand manufactures this clamp? This clamp is supplied by Kukamet and listed under SKU 111-5-D-C3 for workshop and fixture applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 229mm Horizontal Clamping Lever Spindle, Massive Holding Arm, 5 000N Holding Force - Kukamet
Take advantage of a compact, heavy-duty lever clamp that combines a massive holding arm, a vertical base for secure mounting and a long 229 mm reach for flexible fixture design; order the clamp directly via Metav Werkzeuge or consult the specialists for application advice. Horizontal clamp 112 — Kukamet horizontal lever clamp with 229 mm arm and 5 kN holding force The Horizontal clamp 112 is a robust lever clamp designed for horizontal workpiece fixation in jigs, fixtures and assembly stations, offering a vertical-base mounting and a 90° clamping angle for stable, repeatable clamping. Massive holding arm Vertical base mounting 229 mm arm length Up to 5,000 N holding force Consistent clamping performance for productive workflows The clamp delivers reliable, measurable clamping forces: a holding force of 5,000 N and a pressing force of 4,500 N, enabling secure fixation of medium-duty components during machining, assembly or inspection. These quantified values support process stability and allow planners to size fixtures with confidence, reducing rework and downtime. The lever operation ensures quick actuation and repeatable force transmission, which is particularly advantageous where cycle times and consistency matter. The documented force ratings provide a clear, rational basis for selection in production and workshop environments. Durable construction that reduces setup variation Built with a massive holding arm and a blackened finish, the clamp delivers mechanical stiffness and basic corrosion protection without adding unnecessary weight. The robust arm minimises elastic deformation under load, preserving alignment and repeatability across repeated cycles. With a 90° clamping angle and a 229 mm reach, the component clearance is increased while the fixture footprint remains compact. The unit’s overall mass of 1.6 kg contributes to solidity during operation while keeping the clamp easy to integrate into existing assemblies. Simple integration into jigs and fixtures The vertical base mounting option facilitates direct attachment to plates or tooling blocks, allowing the clamp to be positioned precisely in the fixture layout. The horizontal lever action provides a clear clamping direction, making it suitable for applications where transverse clearance and unobstructed access are required. The compact design and standardised dimensions support modular tooling concepts and make the clamp a practical choice for both single-station workholding and small-series production. Suited to workshop and light industrial use with clear value As a straightforward, mechanically driven workholding element, the clamp offers an efficient balance of strength and simplicity that fits maintenance workshops, toolrooms and production fixtures. The durable finish and compact mass mean fewer replacements and less servicing, contributing to predictable operating costs and uptime. For additional technical information or if application-specific data are required, Metav Werkzeuge provides consultancy and can supply detailed drawings or order information to support integration into existing systems. Choose the Kukamet Horizontal clamp 112 for robust, repeatable clamping in fixtures and contact Metav Werkzeuge for supply and technical guidance Technical data SKU: B112-5-D-C3 GTIN: 8680731507355 Model designation: Horizontal clamp 112 Manufacturer: Kukamet Core specifications Arm length: 229 mm Clamping angle: 90° Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Weight: 1.6 kg ECLASS: 21041719 ETIM: EC011973 Materials & features Finish: blackened Mounting: vertical base Design detail: massive holding arm Type: horizontal lever clamp Category: clamps FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal clamp 112 provides a maximum holding force of 5,000 N (holding force) and a pressing force rated at 4,500 N. Can the clamp be mounted directly to a tooling plate? Yes, the clamp uses a vertical-base mounting which allows direct attachment to plates or tooling blocks for secure fixture integration. What is the reach of the clamp arm? The arm length is 229 mm, offering extended clearance for workpieces and flexible positioning in jigs and fixtures. Is the clamp suitable for repeated production cycles? The robust construction, massive holding arm and measured force ratings make the clamp appropriate for repeated use in workshop and light industrial production settings; the blackened finish gives basic corrosion protection. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2300 N Horizontal Clamp With Safety Lock, Blackened Finish - Kukamet
Compact, secure clamping with measurable performance: the combination of a compact 90° angle base, a safety lock and a holding force of 2,500 N ensures reliable fixture retention and consistent process throughput. Order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — 90° angle base, safety lock (Kukamet) The Horizontal clamp 113 is a robust lever-style horizontal clamp designed for secure, repeatable clamping where space is limited and operator safety is required With safety lock for secure clamping 90° angle base for flush mounting Holding force up to 2,500 N Consistent clamping force for repeatable fixtures The clamp delivers a maximum holding force of 2,500 N and a maximum clamping force of 2,300 N, values that support reliably fixed workpieces in production and assembly jigs. These figures translate directly into less repositioning and lower rework rates, since the applied forces are quantifiable and consistent. The pressure spindle is specified as M8×50, which enables fine adjustment of the clamping contact and simplifies integration with existing fixture plates. Space-saving mounting that keeps tooling accessible A compact footprint and the integrated 90° angle base enable fixing the unit close to edges or within tight fixture layouts. The angled mounting reduces obstruction in dense setups and supports ergonomic access for operators during quick-change tasks. With a mass of just 0.42 kg, the clamp adds minimal load to movable fixtures and is well suited to modular tooling where weight matters for handling and position accuracy. Built for safety and uninterrupted operation Equipped with a safety lock, the clamp secures the lever in its closed position to prevent accidental release during machining or handling. The lever-style mechanism provides rapid actuation while the locking feature meets typical workshop safety expectations for manual clamps. The external finish is a blackened finish, which offers corrosion protection and helps maintain a professional workshop appearance over long service intervals. Simple integration and clear identification The clamp’s compact design and standard spindle size make it straightforward to incorporate into existing jigs and fixtures. Mechanical characteristics are transparent and measurable, supporting quality assurance processes and fixture documentation. The model is supplied under the Kukamet range and is identified by SKU B113-3-L, enabling clear inventory tracking and reorder management. For project-specific advice on the Kukamet Horizontal clamp 113, or to arrange supply and technical information from Metav Werkzeuge, contact our consultants at Metav Werkzeuge in Emmerich Technical Data SKU: B113-3-L GTIN: 8680731507485 ECLASS: 21041719 ETIM: EC011973 Core specifications Weight: 0.42 kg Maximum holding force: 2,500 N Maximum clamping force: 2,300 N Pressure spindle: M8×50 Clamping angle: 90° Materials & features Finish: blackened finish Mounting type: angle base Safety lock: yes Device type: horizontal lever clamp FAQ What holding and clamping forces does this clamp provide? The Kukamet horizontal clamp 113 offers a maximum holding force of 2,500 N and a maximum clamping force of 2,300 N, values suited for secure fixture retention. How is the clamp mounted in a fixture? Mounting is via an integrated 90° angle base, designed for flush or edge mounting in modular jigs and fixture plates. Which spindle size is fitted to adjust contact pressure? The clamp uses an M8×50 pressure spindle, allowing fine adjustment of the clamping contact. Is there a safety mechanism to prevent accidental release? Yes — the unit is supplied with a safety lock to secure the lever in the closed position. How heavy is the clamp and what impact does that have on fixtures? The clamp weighs 0.42 kg, which keeps additional load minimal for movable or lightweight fixture assemblies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2300 N Horizontal Clamp With Vertical Foot, Massive Holding Arm, Galvanised - Kukamet
Take advantage of a compact lever clamp that combines a massive holding arm, galvanised corrosion protection and reliable forces up to 2,500 N for secure fixturing; order directly via Metav Werkzeuge or contact our consultants for specification advice. Horizontal clamp 112 by Kukamet — massive holding arm, 90° lever clamp The Horizontal clamp 112 is a compact lever clamp designed for secure fixturing at a fixed 90° angle, suitable for jigs, fixtures and general workshop applications Massive holding arm for stable clamping Galvanised construction for corrosion resistance 90° lever clamp with vertical foot mounting Holding force up to 2,500 N Consistent, measurable clamping performance for production use The lever design delivers a repeatable clamping action that supports reliable process control in assembly and machining tasks. With a holding force of 2,500 N and a clamping force of 2,300 N, this clamp provides clear, comparable performance figures for fixture planning. The quantifiable forces reduce uncertainty during setup and allow accurate load calculations, helping to maintain stable part position throughout handling and machining. Robust construction that minimises downtime Constructed in galvanised steel and fitted with a massive arm, the clamp offers mechanical durability and enhanced resistance to workshop environments. The low component weight of 0.292 kg combines the benefits of a solid clamping element with minimal added mass in fixtures, easing handling during assembly while providing the stiffness required for repetitive clamping cycles. Corrosion protection helps extend service intervals and supports long-term availability of fixturing assets. Space-saving mounting and precise geometry for fixtures A compact 68 mm arm and vertical foot mounting enable flexible installation on fixture plates and small jigs where space is limited. The fixed 90° orientation keeps locating geometry straightforward and avoids angular deviations during clamping operations, simplifying repeatability checks and reducing cycle-time adjustments. Thanks to the vertical foot, the clamp integrates cleanly into modular clamping systems and indexed tooling setups. Safe handling and straightforward integration into workflows The lever mechanism provides fast engagement and a clearly defined end position for secure holding without complex adjustment. As a horizontal lever clamp from Kukamet it is suitable for a wide range of light- to medium-duty applications where a reliable, manual clamping action is required. Measurable forces and compact dimensions make it straightforward to specify in CAD layouts and to include in work instructions for operators, supporting consistent quality on the shop floor. For workshop-ready clamping with Kukamet's robust lever design, contact Metav Werkzeuge for availability and local delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 112-3-D-C1 GTIN: 8680731500493 Model: 112 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Core measurements Arm length: 68 mm Weight: 0.292 kg Angle: 90° Clamping force (max): 2,300 N Holding force (max): 2,500 N Materials & features Galvanised Massive holding arm Vertical foot mounting 90° lever clamp Category: Clamps FAQ What holding and clamping forces does the clamp provide? The horizontal clamp 112 offers a holding force of 2,500 N and a clamping force of 2,300 N as specified for fixture calculations. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot; the clamp is designed for vertical-foot installation on jig and fixture plates. Is the construction suitable for workshop environments prone to moisture? The galvanised finish provides corrosion resistance, making the clamp suitable for typical workshop conditions and reducing maintenance frequency. What are the key dimensions to consider for layout? Relevant figures are the arm length of 68 mm, a fixed 90° orientation and a unit weight of 0.292 kg, which help with CAD integration and balance calculations. Which SKU identifies this clamp for ordering or spare parts? This lever clamp is listed as SKU 112-3-D-C1 and marketed as the Horizontal clamp 112 by Kukamet Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 2500N Pneumatic Clamp Without Cylinder, Horizontal Base, Zinc-Plated - Kukamet
Take advantage of the combination of high holding force, a zinc-plated, compact design, and a stable horizontal-foot mounting for dependable clamping in fixtures; order the device directly via Metav Werkzeuge or request advice from our consultants. Pneumatic clamp 681 – Kukamet horizontal-foot clamp, zinc-plated, no cylinder A Pneumatic clamp 681 designed for secure right-angle clamping in fixtures and jigs, offering high holding capacity with a compact, corrosion-resistant construction. Horizontal foot for stable mounting High holding force: 9,000 N Zinc-plated corrosion protection Reliable clamping for heavy-duty fixtures The 9,000 N holding force combined with a 2,500 N actuation capability makes this clamp suitable for securing substantial workpieces during machining and assembly operations. The zinc-plated finish contributes to long-term resistance against routine workshop wear and humidity, while the unit's compact mass of 2.8 kg keeps fixture loads low. These characteristics translate into fewer workpiece shifts, reduced rework and more consistent process outcomes, which supports higher productivity and predictable cycle times. Flexible integration with existing pneumatic systems Designed with a horizontal foot and a 90° clamp angle, the clamp fits into common jig and fixture layouts for right-angle holding. Supplied without a pneumatic cylinder, the design gives system integrators the flexibility to match cylinder type and size to specific plant air systems and control strategies, simplifying maintenance planning and spare-part management. The omission of an integrated cylinder reduces initial complexity while enabling tailored pneumatic configurations to optimise actuation speed and endurance. Durable construction for continuous workshop use Built on the lever-clamp tradition, this unit delivers practical robustness for recurring production demands. The zinc-plated surface and proven mechanical layout ensure resistance to corrosion and mechanical fatigue, helping to extend service intervals and lower downtime. The horizontal mounting pad eases alignment during installation and supports consistent clamping behaviour over many cycles. Overall, the design promotes steady performance in fixtures, jigs and custom assemblies where repeatable clamping is essential. Discuss integration and ordering options for the Kukamet Pneumatic clamp 681 with Metav Werkzeuge in Emmerich — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid supply. Technical data SKU: 681-4-M GTIN: 8680731505054 Manufacturer: Kukamet Facts Weight: 2.8 kg Holding force: 9,000 N Clamping force (max): 2,500 N Clamp angle: 90° Special features Material: Zinc-plated Mounting: Horizontal foot No pneumatic cylinder included Category: Clamp FAQ What is the maximum holding force of this clamp? The Kukamet Pneumatic clamp 681 offers a maximum holding force of 9,000 N, providing secure retention for heavy or force-prone workpieces. Does the clamp include a pneumatic cylinder? No; the unit is delivered without a pneumatic cylinder, allowing the cylinder selection to be matched to the specific pneumatic system and actuation requirements. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, designed for stable attachment to fixture bases and jigs at a 90° clamp angle. What material and surface finish does the clamp have? The clamp is zinc-plated, giving corrosion resistance suitable for typical workshop environments. Can this clamp be used for right-angle holding in jigs? Yes. The 90° clamp angle and horizontal-foot mounting make the device suitable for right-angle clamping tasks in jigs and fixtures; refer to the SKU 681-4-M for ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3.5 kN Horizontal Clamp, Zinc Plated, M10x70 Spindle, 3650 N Holding Force - Kukamet
Take advantage of robust holding performance and corrosion protection combined with a compact, easy-to-mount design for dependable fixture clamping; order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal toggle clamp 113 by Kukamet — zinc‑plated, 90° lever clamp The Horizontal toggle clamp 113 is a compact zinc‑plated lever clamp designed for secure horizontal workpiece holding in fixtures, jigs and assembly stations where repeatable positioning and corrosion resistance are required. Zinc-plated steel finish 90° clamping angle for fixtures 3,500 N clamping force Angled foot mounting for easy fixing Corrosion protection that keeps production running The zinc‑plated finish provides reliable corrosion resistance, extending service intervals and reducing unexpected downtime in humid or workshop environments. A protective coating prevents early surface degradation, maintaining consistent contact geometry and thus preserving clamping accuracy over time. For users seeking long‑term reliability, the coated surface reduces the need for frequent replacement or refurbishment, supporting continuous production and predictable fixture behaviour. Strong, repeatable clamping for stable setups With a rated 3,500 N clamping force and a maximum holding force of 3,650 N, this lever clamp supplies the consistent pressure required for repeatable operations. The adjustable M10x70 spindle allows fine tuning of contact height and compression, enabling exact workpiece positioning without resorting to makeshift shims. Clear separation of clamping and holding values means fixtures can be designed with predictable safety margins, improving process stability and reducing rework in assembly or inspection tasks. Simple integration to fixtures and jigs The angled foot mounting simplifies attachment to plates or frames and supports a secure 90° operating position for horizontal action. Weighing 0.94 kg, the unit adds minimal mass to moving assemblies while offering a compact footprint that fits tight fixture layouts. The combination of compact dimensions and standardised spindle thread enables straightforward replacement or retrofit into existing tooling without extensive redesign, helping to shorten installation time and maintain production flow. Practical use and low‑effort maintenance Designed as a practical lever clamp for light to medium‑duty applications, the model is suitable for routine assembly, welding jigs and general workshop fixturing where frequent manual clamping is required. Routine upkeep is limited to keeping pivot points clean and applying light lubrication to the toggle joint; the standard spindle allows simple replacement if wear occurs. The robust construction ensures dependable operation with minimal servicing, supporting an efficient workflow and predictable fixture availability. Request a tailored technical consultation or delivery schedule from Metav Werkzeuge for the Kukamet horizontal toggle clamp 113 — contact info@metav-werkzeuge.com or call +49 2822 7131930 for details and assistance Technical data Article number: 113-4 GTIN: 8680731500912 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Numbers / Core technical data Max clamping force: 3,500 N Max holding force: 3,650 N Weight: 0.94 kg Angle: 90° Spindle: M10x70 Design / Special features Material: zinc‑plated Mounting: angled foot mounting (Winkelfuß) Category: Spanner Arm: not applicable Story trigger: lever clamp FAQ What clamping force can be expected from this lever clamp? The clamp delivers a rated clamping force of 3,500 N and a maximum holding force of 3,650 N for stable fixturing. Can the clamp be adjusted for different workpiece heights? Yes, the M10x70 spindle allows height adjustment to accommodate varying workpiece thicknesses and achieve repeatable contact pressure. Is the finish suitable for workshop environments? The zinc‑plated finish provides corrosion resistance appropriate for typical workshop and assembly conditions, helping to prolong service life. How is the clamp mounted to a fixture base? Mounting is via the angled foot, designed for straightforward attachment to plates or frames in a 90° horizontal orientation. Is this clamp suitable for retrofitting existing jigs? The compact design and standard spindle thread make the clamp suitable for retrofit into many existing fixture layouts without major modifications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3000 N Pneumatic Clamp Vertical Handle, Zinc Plated, 3300 N Hold Force - Kukamet
Take advantage of reliable clamping performance and a compact, corrosion-resistant design to keep fixtures productive and maintenance straightforward; order the Kukamet clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Kukamet 651 Pneumatic Clamp – Vertical-Foot, 90° Actuation The 651 pneumatic clamp is a vertical-foot clamping solution for industrial jigs and fixtures, providing a 90° actuation and a vertical handle for ergonomic and automated operation Vertical-foot mount with vertical handle Holding force up to 3,300 N Actuating force 3,000 N for secure clamping Galvanised steel body, durable industrial finish Predictable clamping force for repeatable production results The pneumatic clamp delivers a clearly defined balance between holding and actuation, with a holding force of up to 3,300 N and a maximum actuating force of 3,000 N. This numeric performance creates a predictable clamping outcome in serial production and reduces variability at the workpiece. Because force values are specified in newtons, engineers can calculate fixture safety margins and cycle loads precisely, enabling shorter setup validation and fewer scrapped parts. The controlled pneumatic actuation also minimises shock loads and protects delicate components during securing. Saves space and simplifies fixture layout Designed with a vertical-foot mount and a vertical handle, this clamp occupies a small footprint while keeping the actuator clear of adjacent tooling. The vertical arrangement suits congested fixtures and allows integration into multi-clamp arrays without obstructing part transfer paths. The 90° actuation angle provides a compact movement arc, which reduces the need for additional clearance and simplifies CAD layout for new jigs. Overall, the compact geometry supports denser clamp placement and faster changeovers in lean production cells. Built for industrial environments and low maintenance The housing is finished in galvanised steel to resist corrosion in workshop and shop-floor environments, ensuring long service intervals and predictable wear characteristics. At a mass of 2.1 kg the unit combines a robust construction with manageable weight for handling during assembly and retrofitting. The galvanised surface reduces the need for frequent recoating or special storage, which in turn lowers lifecycle maintenance costs and keeps mean time between failure (MTBF) high in everyday use. Straightforward integration into production systems This pneumatic clamp is suitable for a wide range of assembly, welding and testing fixtures where stable, repeatable clamping is required. The clamp’s actuation profile and measured forces make it straightforward to specify within pneumatic control circuits and to match with existing valves and pressure settings. For applications that require quick part access, the vertical handle assists manual intervention; in automated cells the actuator can be coupled to existing pneumatic lines for synchronized operation. The design emphasises dependable function in industrial fixtures while keeping installation and commissioning effort to a minimum. For advice on integrating the Kukamet 651 into specific fixtures or for procurement via Metav Werkzeuge, contact Metav Werkzeuge by phone or e‑mail to discuss technical details and delivery options Technical Data SKU: 651-4-H GTIN: 8682843521663 Manufacturer: Kukamet Weight: 2.1 kg Maximum actuating force: 3,000 N Maximum holding force: 3,300 N Actuation angle: 90° Material: Galvanised steel Mounting: Vertical-foot mount Special feature: Vertical handle FAQ What clamping forces can be expected from this pneumatic clamp? The Kukamet 651 pneumatic clamp provides a maximum holding force of 3,300 N and an actuating force of 3,000 N, values that support predictable clamping in production fixtures. Is the clamp suitable for welding fixtures? Yes, the galvanised steel construction and robust actuation make the 651 suitable for many welding and assembly fixtures where repeatable clamping is required. How is the clamp mounted to a fixture plate? The clamp uses a vertical-foot mounting arrangement designed to be bolted to fixture plates, allowing a compact installation and easy integration into existing jig geometry. Can the vertical handle be used for manual operation? The vertical handle is intended to assist manual positioning and access; where full automation is needed, pneumatic actuation provides repeatable, valve-controlled operation. Which SKU and GTIN identify this clamp? The product is listed as SKU 651-4-H with GTIN 8682843521663 for procurement and logistics purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3000 N Pneumatic Clamp With Vertical Base, Massive Holding Arm, Zinc-Plated - Kukamet
Take advantage of the combination of sturdy construction, repeatable pneumatic actuation and a long 200 mm holding arm for secure, efficient fixturing. Order the Pneumatic Toggle Clamp 651 directly via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic Toggle Clamp 651 — Galvanised toggle clamp with 200 mm arm (Kukamet) The Pneumatic Toggle Clamp 651 is a vertical-foot clamping unit designed for fixtures and jigs in production environments, combining a long reach with robust, repeatable pneumatic actuation for secure workholding. Galvanised construction for corrosion resistance 200 mm massive holding arm Vertical-foot mounting for stable setup 3,300 N maximum holding force Dependable force where repeatability matters The unit delivers a clearly defined combination of pneumatic actuation and mechanical toggle locking, providing a maximum actuation force of 3,000 N and a holding force of 3,300 N. This separation between actuation input and static clamping capacity means the clamp secures components reliably without constant actuator load. For production runs and repeatable assembly tasks, the pneumatic drive offers consistent cycle-to-cycle behaviour, while the toggle mechanism maintains clamp position under sustained loads — a practical solution for automated or semi-automated workstations that demand predictable clamping performance. Built for workshop environments and low maintenance Constructed from galvanised steel and fitted with a massive holding arm, the clamp resists everyday workshop wear and moderate corrosion, reducing the need for frequent replacement. The robust arm geometry distributes load across the toggle, improving component life and reducing maintenance intervals. Where surface protection is a priority, the galvanised finish provides a durable barrier; routine inspection of seals and supply-line filtration keeps the pneumatic components performing reliably over long production cycles. Easy integration into fixtures and jigs With a 200 mm arm length and a vertical-foot mounting arrangement, the clamp fits a wide range of fixture layouts and allows secure attachment to flat bases or tooling plates. The 90° actuation angle gives a compact movement path suitable for tight assemblies while still delivering an extended reach during clamping. Installation requires straightforward mechanical mounting and standard pneumatic supply components; the design supports quick retrofitting into existing tooling or purpose-built pallets, improving workstation throughput without complex modifications. Contact Metav Werkzeuge for technical advice on integrating the Kukamet pneumatic toggle clamp into production fixtures or to arrange supply from Emmerich. Technical data Article number: 651-4-D-C3 Manufacturer: Kukamet Eclass: 21021004 ETIM: EC011973 Facts Arm length: 200 mm Max actuation force: 3,000 N Max holding force: 3,300 N Angle: 90° Special features Material: galvanised Vertical-foot mounting Massive holding arm Category: toggle clamp / spanner SKU: 651-4-D-C3 FAQ What clamping and actuation forces does this clamp provide? The Pneumatic Toggle Clamp 651 provides a pneumatic actuation force of up to 3,000 N and a maximum holding force of 3,300 N, delivering reliable static clamping for fixture and jig operations. Is the clamp suitable for use in damp or mild-corrosive workshop conditions? The clamp features a galvanised finish which offers good resistance to corrosion in typical workshop environments; however, for highly corrosive or marine atmospheres, additional protection or alternative materials should be considered. How is the clamp mounted to a fixture plate? Mounting is via a vertical-foot arrangement that secures the base plate to a tooling surface, providing a stable connection for demanding clamping cycles and simple alignment within existing fixtures. Can the clamp be used in automated or repeat-cycle systems? Yes. The pneumatic actuation and toggle locking are suitable for automated or semi-automated production lines, offering consistent cycle performance when paired with appropriate control valves and air preparation. What is the reach and movement characteristic of the clamping arm? The clamp has a 200 mm holding arm and a 90° actuation angle, providing extended reach with a compact movement path that suits confined assembly spaces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3500 N Horizontal Clamp With Safety Lock, Galvanised - Kukamet
Take advantage of the galvanised construction, integrated safety lock and a compact 90° angle base for consistently secure clamping. The robust M10x70 pressure spindle and up to 3,500 N clamping force ensure repeatable workholding and reduced setup time. Order via Metav Werkzeuge or consult the team for application advice. 113 Horizontal clamp »113« – Galvanised horizontal clamp, 3,500 N clamping force (Kukamet) The 113 Horizontal clamp is a compact horizontal clamp for secure 90° workholding in fixtures and jigs, designed for reliable production and frequent use Galvanised steel body for corrosion resistance 3,500 N clamping force for firm workholding Integrated safety lock prevents accidental release Angle base for 90° mounting flexibility Secure clamping that keeps production running The clamp delivers a defined clamping force of 3,500 N and a holding force of 3,650 N, providing stable fixation for machining, assembly and inspection tasks. The M10x70 pressure spindle converts lever motion into consistent contact pressure, which reduces rework and minimises position drift during secondary operations. For workshops that value throughput and repeatability, this lever-style workholding device supports shorter cycle times and predictable process results. Durable construction with safety integrated A galvanised finish protects the mechanism against corrosion in workshop environments, extending service life and lowering maintenance frequency. The unit includes an integrated safety lock that secures the lever in the clamped position and prevents unintentional release during handling or vibration-prone processes. The angle base at 90° enables straightforward mounting on fixtures or machine tables, offering a compact footprint without compromising robustness. These design choices support safer workplaces and reduce unscheduled stoppages. Fast setup and versatile fixture integration The horizontal layout and lever actuation permit rapid clamping and unclamping, cutting setup times on repetitive jobs. The compact form and standard thread allow easy integration into bespoke jigs or multi‑station fixtures, while the galvanised surface maintains appearance and function under regular use. The mechanism is particularly suitable where frequent part changes demand quick, secure workholding and where a reliable mechanical lock is required for peace of mind. For procurement or technical advice on the Kukamet horizontal clamp, contact Metav Werkzeuge for tailored guidance and secure delivery from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data SKU: 113-4-L GTIN: 8680731500981 eClass: 21041719 ETIM: EC011973 Core Data Clamping force: 3,500 N Holding force: 3,650 N Weight: 0.94 kg Angle: 90° Materials & Features Material: galvanised steel Mounting: angle base Pressure spindle: M10x70 Safety lock: integrated Category: clamp / workholding FAQ What clamping and holding forces does this clamp provide? The 113 horizontal clamp provides a clamping force of 3,500 N and a holding force of 3,650 N for secure fixation during machining and assembly. Can the clamp be mounted at right angles to the work surface? Yes, the clamp features an angle base for 90° mounting, making it suitable for fixtures and machine tables requiring perpendicular workholding. Is the finish suitable for workshop environments? The galvanised construction offers corrosion resistance and helps extend service life under normal workshop conditions. Does the clamp include a safety mechanism to prevent accidental release? Yes, an integrated safety lock secures the lever in the clamped position to prevent unintended opening during vibration or handling. Which spindle size is used to apply pressure? The clamp uses an M10x70 pressure spindle to transfer lever motion into consistent contact pressure. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com