Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° 62mm Pneumatic Clamp With Vertical Handle And Solid Holding Arm, 1,200N Thrust / 1,400N Hold - Kukamet
Take advantage of a robust, pneumatically driven clamping solution combining consistent 1,200 N operating force, a massive galvanised holding arm, and compact mounting for space-efficient fixtures; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. 651 Pneumatic clamp — vertical-handle design with 1,200 N clamping force (Kukamet) The 651 is a pneumatic clamp for secure fixture clamping in production jigs and workshop assemblies Vertical handle with robust holding arm 1,200 N operating force for repeatable clamping 1,400 N holding force for secure locking Galvanised construction for corrosion resistance Consistent clamping force for reliable production The pneumatically actuated design delivers a consistent 1,200 N operating force that keeps parts fixed during machining and assembly, reducing variability between cycles. Built-in pneumatic actuation ensures uniform strokes and predictable pressure across repeated operations, which shortens setup time and lowers scrap rates. The unit also provides a 1,400 N holding force, offering a safety margin for transient loads; both values enable clear planning of fixture capacity and allow engineers to match the clamp to process force requirements. Compact mounting and ergonomic handling to speed workflows Designed with a vertical-foot mounting and a vertical handle, the clamp fits neatly into tight fixture layouts while remaining easy to operate during manual loading or automated cycling. The 62 mm arm gives a practical reach for many workpiece geometries without adding bulk, and the 90° orientation suits typical right-angle fixture arrangements. The combination of compact installation and an intuitive handle contributes to faster part changes and smoother cycle integration on both manual benches and automated stations. Robust construction that reduces maintenance and downtime A galvanised finish and a massive holding arm deliver resistance to corrosion and mechanical wear, which extends service intervals and supports continuous operation in demanding workshop environments. Heavy-duty components limit deformation under load, maintaining clamping accuracy over long production runs. The simple mechanical principle behind the clamp also makes servicing straightforward: fewer moving parts mean less to maintain, so assembly lines and fixtures stay productive with predictable upkeep. For specification guidance, mounting options or fast supply of the Kukamet 651 pneumatic clamp, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance and technical advice Technical data Article number: 651-2-H-D-C1 Product: Pneumatic clamp 651 Manufacturer: Kukamet Performance data Max operating force: 1,200 N Max holding force: 1,400 N Arm: 62 mm Angle: 90° eCl@ss: 21021004 ETIM: EC011973 Construction & features Galvanised finish Vertical handle Massive holding arm Vertical-foot mounting Catalogue: 611-612-631-651-652-katalogseite.pdf FAQ What clamping and holding forces does the clamp provide? The Kukamet 651 pneumatic clamp provides a maximum operating force of 1,200 N and a holding force of 1,400 N, suitable for secure part fixation in many production and fixture applications. Can the clamp be mounted in a vertical orientation? Yes, the clamp features a vertical-foot mounting and a vertical handle, making the 651 suitable for right-angle fixtures and space-limited mounting configurations. How does the construction influence service life? The galvanised finish and massive holding arm of the 651 reduce corrosion and mechanical wear, extending service intervals and supporting long-term, repetitive use on workshop and production lines. Is the 62 mm arm suitable for varied workpiece geometries? The 62 mm arm provides a practical reach for a wide range of small to medium workpieces and is designed to balance reach with compact fixture integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 6500 N Pneumatic Clamp With Pneumatic Cylinder, Zinc Plated, 30000 N Holding Force - Kukamet
Take advantage of the combination of robust galvanised construction, high holding force 30,000 N and repeatable pneumatic actuation for reliable fixture performance; this clamp supports stable production cycles and reduces rework. Order the (Kukamet Pneumatic toggle clamp 682) directly via (Metav Werkzeuge) or ask our consultants if needed. Pneumatic toggle clamp 682 by Kukamet — Pneumatic cylinder, 30,000 N holding force A pneumatic toggle clamp 682 engineered for secure horizontal mounting in jigs, fixtures and production tooling where consistent clamping and high holding performance are required. Galvanised construction for corrosion resistance Holding force 30,000 N Pneumatic cylinder actuation Horizontal base for stable mounting Consistent, measurable clamping for repeatable processes The pneumatic actuation and toggle mechanism deliver a consistent clamping force that supports repeatable cycle times and predictable process results. With a max press force of 6,500 N generated by the pneumatic cylinder and a holding force of 30,000 N once the clamp is engaged, the unit separates actuation force from static retention, reducing slip and part movement during machining or welding. This separation of functions translates into fewer rejects and shorter setup checks, a tangible efficiency argument for production lines and fixture designers. Durable construction that minimises maintenance and downtime Constructed from galvanised components and fitted with a horizontal mounting foot, the clamp provides mechanical robustness and enhanced corrosion resistance suitable for workshop environments. The substantial mass (21.269 kg) contributes to stability under dynamic loads and helps maintain alignment over repeated cycles. The galvanised finish reduces surface corrosion, extending service life and lowering lifetime maintenance effort. Simple mechanical geometry of the toggle means inspections focus on seals and pneumatic fittings rather than complex transmission elements. Integration-friendly design for industrial fixtures and automated cells The 90° toggle geometry and horizontal base facilitate straightforward integration into jigs, presses and automated assemblies, providing a compact clamping solution with a defined clamping direction. The combination of pneumatic cylinder actuation and toggle linkage enables fast actuation speeds and controlled closing behaviour, suitable for pick-and-place sequences or welding fixtures where cycle speed and safety interlocks are critical. Adjustment options in the clamping interface permit alignment with existing datum points, supporting installation in both manual and robotic workstations while maintaining repeatability across production batches. For a technical consultation or a tailored quotation for the Kukamet 682 pneumatic toggle clamp, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 682-8 GTIN: 8680731505153 Manufacturer: Kukamet Eclass: 21021004 ETIM: EC011973 Facts Weight: 21.269 kg Max holding force: 30,000 N Max press force: 6,500 N Angle: 90° Special features Material: Galvanised Mounting: Horizontal base Actuation: Pneumatic cylinder FAQ What is the difference between pressing force and holding force on this clamp? The pneumatic cylinder of the Kukamet 682 generates the pressing force of 6,500 N used to engage the toggle; the holding force of 30,000 N is the static retention capacity provided by the toggle mechanism once clamped. For which applications is this clamp most suitable? The clamp is intended for fixtures, jigs, welding and assembly operations where a defined clamping direction, fast pneumatic actuation and high retention are required; the horizontal base simplifies mounting in production tooling. How is the clamp mounted and aligned in a fixture? Mounting is via the horizontal base; alignment is achieved by positioning the base on the datum surface and securing with appropriate fasteners. The 90° toggle geometry provides a clear clamping direction for fixture design. What routine maintenance is required? Maintenance focuses on pneumatic fittings, seal condition and the toggle pivot points; periodic inspection and replacement of seals or pneumatic hoses preserves performance and repeatability. Is the galvanised finish suitable for humid or mildly corrosive environments? The galvanised surface improves corrosion resistance for workshop conditions; for continuous outdoor exposure or aggressive chemical environments, supplementary protection or specific material selection should be considered. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 6500 N Pneumatic Clamp Without Cylinder, Zinc-Plated, 30 kN Holding Force - Kukamet
Take advantage of the combination of robust holding force, galvanised durability and a compact horizontal-foot design to secure high-repeatability workholding in production. The clamp’s compatibility with customer-specified pneumatic cylinders and its lever-style 90° configuration make it a flexible choice for fixture systems; order via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic clamp 681 – Horizontal-foot 90° lever clamp (Kukamet) The Pneumatic clamp 681 is a horizontal-foot, lever-style clamp designed for secure, repeatable workholding in industrial fixture applications and supplied without a pneumatic cylinder Galvanised steel construction Max holding force 30,000 N Actuating force up to 6,500 N Horizontal foot mounting 90° lever clamp configuration Secure clamping that improves process reliability The lever-style clamping mechanism delivers a clear distinction between actuating force and holding force, with an actuating peak of 6,500 N and a steady holding capacity of 30,000 N. This separation ensures that short control pulses from valve systems achieve fast closure while the high retention force maintains parts reliably during machining or assembly, reducing rework and scrap. The galvanised finish contributes corrosion resistance and long-term dimensional stability in workshop environments. Compact mounting for flexible fixture integration Designed with a horizontal foot and a 90° lever angle, this clamp suits fixture plates and custom jigs where lateral clearance and predictable clamp geometry are essential. The unit’s mass (approx. 11.3 kg) provides inherent stability without excessive bulk, allowing straightforward bolting to tooling plates. The compact footprint supports tight nest arrangements and faster changeovers, which is beneficial for medium- to high-volume production runs demanding short cycle times. Adaptable supply concept and low-maintenance operation Delivered without pneumatic cylinder, the clamp allows selection of a cylinder to match system pressure and control schemes, enabling tailored actuation speeds and integration with existing pneumatics. The galvanised material minimises surface wear and eases maintenance cycles, while the lever configuration offers simple mechanical inspection points. Supplied by Kukamet and distributed through Metav Werkzeuge’s quality-filtered supply chain, the device is intended for reliable workshop use across a range of production environments. Contact Metav Werkzeuge today to discuss integrating the Kukamet Pneumatic clamp 681 into existing fixtures or to request application-specific advice from our specialists Technical data Article number: 681-8-M GTIN: 8680731506624 Brand: Kukamet Core specifications Weight: 11.3 kg Max holding force: 30,000 N Max actuating force (closing): 6,500 N Angle: 90° eClass: 21021004 ETIM: EC011973 Features & materials Material: galvanised steel Mounting: horizontal foot Supplied without pneumatic cylinder Lever-style clamp (hebelspanner) Category: clamp FAQ What is the difference between actuating and holding force for this clamp? The actuating force is the force required to drive the clamp into the closed position (6,500 N), while the holding force (30,000 N) is the retention capacity once the clamp is engaged; the Pneumatic clamp 681 separates these functions for efficient control and strong retention. Is a pneumatic cylinder included with the clamp? No, the clamp is supplied without a pneumatic cylinder so that an appropriate cylinder can be selected to match system pressure and cycle requirements when integrating the Kukamet clamp 681. How is the clamp mounted to a fixture plate? The clamp uses a horizontal foot mounting that is bolted to tooling plates or fixture bases; the horizontal-foot design and 90° lever geometry facilitate predictable clamping positions for jigs and fixtures. Can the clamp be used in corrosive or humid workshop environments? The galvanised steel construction provides enhanced corrosion resistance compared with untreated components, supporting longer service life in standard workshop conditions for the Kukamet Pneumatic clamp 681. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 650mm Pneumatic Clamp Vertical Handle Massive Arm, 4 500 N Pressure / 5 000 N Holding Force, Zinc Plated - Kukamet
Robust galvanised construction combined with a 5,000 N holding capacity and a 130 mm holding arm delivers reliable, repeatable fixturing for industrial production. Order the clamp directly via Metav Werkzeuge or consult our advisors for application support. Pneumatic clamp 651 – Vertical-handle pneumatic clamp with massive holding arm (Kukamet) A Pneumatic clamp 651 designed for secure, repeatable workholding in industrial jigs and fixtures with a vertical handle and galvanised, heavy-duty arm Vertical handle for compact actuation Massive galvanised holding arm for durability Holding force up to 5,000 N for secure fixturing Pressure force rating 4,500 N for pneumatic drive 130 mm arm length with 90° operating angle Stable, measurable clamping for efficient production The clamp delivers a quantifiable improvement in workholding: holding force 5,000 N and a pressure force of 4,500 N ensure components remain stationary through machining or assembly. This measurable performance reduces rework and inspection time by improving process stability. The vertical-actuation layout provides predictable force transfer into the fixture, supporting repeatable clamping cycles and consistent quality control across batches. Durable design reduces downtime and maintenance Constructed with a galvanised finish and a massive holding arm, the unit resists corrosion and mechanical wear in workshop environments. The vertical foot mounting secures the clamp rigidly to fixture plates, while the robust arm geometry distributes load away from the fastenings. As a consequence, equipment service intervals are lengthened and fixture downtime is reduced, supporting continuous production and lower total cost of ownership. Compact integration that speeds up setup and cycle time With a 130 mm arm and a fixed 90° operating angle, the clamp is engineered for compact integration into jigs and automated cells. The vertical handle orientation saves lateral space on tooling plates and enables simple pneumatic line routing. Pneumatic actuation provides rapid, controllable motion suitable for short cycle times, aiding throughput and process automation without extensive mechanical complexity. Suitable use cases and operational guidance The device is aimed at heavy-duty fixturing tasks in industrial workshops, assembly lines and machining fixtures where stable, repeatable holding is required. The galvanised construction and solid arm make it particularly appropriate where robustness and corrosion resistance are expected. Basic preventive checks—visual inspection of mounting points and air connections—help preserve long-term reliability and consistent clamping performance. For secure, high-force clamping from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: 651-5-H-D-C1 Model: 651 Type: Pneumatic clamp Brand: Kukamet Core specifications Arm length: 130 mm Holding force max: 5,000 N Pressure force max: 4,500 N Angle: 90° eCl@ss: 21021004 ETIM: EC011973 Special features Mounting: vertical foot Handle: vertical handle Holding arm: massive, galvanised Material: galvanised steel Image asset: 651-H-D-main.jpg FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 5,000 N as specified for the Pneumatic clamp 651 (SKU 651-5-H-D-C1). Is the clamp designed for vertical mounting? Yes, the unit features a vertical foot for mounting and a vertical handle for compact actuation in fixtures. What material is used for the clamp's arm and body? The main components are finished in galvanised steel; the holding arm is delivered as a massive, durable element. Which angle does the clamp operate at? The mechanism is set to operate at a 90° angle, suitable for many standard fixture geometries. Is the clamp suitable for automated production lines? The pneumatic actuation and compact footprint make this clamp suitable for automated jigs and short-cycle production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 652 Pneumatic Clamp With Vertical Base, 2,000 N Stroke Force, Zinc Plated — Kukamet
Combine a massive 67 mm clamping arm with up to 2,500 N holding force and a galvanised finish for dependable, low-maintenance fixture control; order the pneumatic clamp directly via Metav Werkzeuge or consult our advisors for specification support. Pneumatic Clamp 652 by Kukamet — 67 mm arm, 2,500 N holding force The pneumatic clamp 652 is a vertical-foot lever clamp engineered for rapid, repeatable workpiece securing in production, assembly and fixture applications. Massive 67 mm clamping arm Galvanised corrosion protection Vertical-foot mounting for bench use Up to 2,500 N holding force 90° lever angle for compact clamping Consistent clamping force for stable production output The clamp delivers measurable performance: a holding force of 2,500 N and a pressing force of 2,000 N, providing reliable retention during machining, assembly or inspection operations. The pronounced 67 mm arm length and robust lever geometry reduce vibration and movement under load, which improves process stability and reduces rework. Specified forces are primary indicators for fixture design and allow planners to calculate safety margins and clamping layouts; the clear numeric values support rapid integration into existing jigs and fixtures. Easy integration and compact mounting for workshop efficiency Built for bench and fixture use, the device features vertical-foot mounting and a 90° lever angle, enabling compact installation and unobstructed access to the clamped area. The vertical-foot base simplifies attachment to plates or tooling blocks and keeps the clamp profile low, which is advantageous where space is limited. The galvanised finish contributes to long-term durability in busy workshop conditions, lowering maintenance intervals and enabling uninterrupted production runs. These design choices accelerate set-up times and contribute to smoother workflow. Durable construction with maintenance-focused design The clamp’s galvanised construction and massive clamping arm provide corrosion resistance and structural longevity in industrial environments. The lever-style actuation offers straightforward pneumatic operation compatible with standard shop air systems and control valves; the compact mechanism reduces points of wear and simplifies routine inspection. Supplied as a model with clear identification (SKU: 652-3-D-C1), the device is suitable where repeatable, high-load clamping is required and where robustness and low lifecycle maintenance are priorities. Kukamet’s design emphasis on solid materials supports high-utilisation settings. For tailored procurement or specification advice on the Kukamet pneumatic clamp 652, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and reliable supply. Technical data SKU: 652-3-D-C1 Manufacturer: Kukamet Model: 652 eClass: 21021004 ETIM: EC011973 Core measurements Arm length: 67 mm Max holding force: 2,500 N Max pressing force: 2,000 N Lever angle: 90° Materials & special features Material: galvanised Mounting: vertical-foot Massive clamping arm Lever-type pneumatic clamp Category: Spanner FAQ What maximum holding force does this clamp provide? The clamp offers a maximum holding force of 2,500 N as stated for the Kukamet pneumatic clamp 652 (SKU 652-3-D-C1). Can the clamp be mounted on a tooling plate or bench? Yes. The vertical-foot mounting of the 652 is intended for secure attachment to plates or benches and supports compact fixture layouts. What is the arm length and why does it matter? The device has a 67 mm clamping arm; arm length affects leverage, access to the workpiece and the distribution of clamping force within a fixture. Is the clamp suitable for harsh workshop environments? The galvanised finish and solid arm construction of the Kukamet unit are intended to resist corrosion and withstand continuous workshop use, reducing maintenance frequency. Which forces should be considered when designing a fixture with this clamp? Use the 2,000 N pressing force and 2,500 N holding force figures to calculate safety margins and to determine the number and placement of clamps in the fixture. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 652 Pneumatic Clamp With Vertical Base, 2 000 N Stroke Force, 2 500 N Holding Force, Galvanised - Kukamet
Take advantage of a robust combination of high holding force (2,500 N), reliable pneumatic actuation (2,000 N) and a zinc-plated finish that resists corrosion — delivering secure, repeatable clamping for production environments. Order directly via Metav Werkzeuge or consult the specialists for integration advice. 652 Pneumatic Clamp by Kukamet — vertical-foot mounting, zinc-plated, 2,500 N holding force 652 Pneumatic Clamp designed for secure, space-saving vertical installation in production jigs and assembly fixtures. Massive holding arm for stable clamping Zinc-plated corrosion-resistant finish Vertical-foot mounting with 90° clamping angle Holding force up to 2,500 N, pneumatic force 2,000 N Secure, high-force clamping for repeatable production The 652 pneumatic clamp offers a combination of holding force (2,500 N) and pneumatic actuation (2,000 N) that ensures components remain fixed during machining, welding and assembly. High clamping capacity reduces vibration and part movement, which in turn lowers scrap rates and rework. The result is a measurable improvement in process stability and component quality; operators benefit from predictable repeatability and reduced inspection workload. Technical planners will value the clear specification of force values when calculating fixture safety margins. Built for longevity and easy integration into fixtures Constructed with a zinc-plated surface and a massive holding arm, the clamp resists corrosion and maintains rigidity under cyclic loading, extending service intervals and preserving clamping accuracy. The unit is supplied for vertical-foot mounting, offering a compact footprint and a 90° clamping angle that suits many standard jig layouts. With an arm reach of 167 mm, the design balances accessibility and stiffness for a broad range of part sizes. These attributes simplify fixture design and help maintain clamping geometry during repeated cycles, supporting consistent machining tolerances. Practical benefits in the workshop and on the production line This pneumatic clamping solution fits into automated feed systems and manual fixtures alike; pneumatic actuation enables fast, controlled clamping cycles that reduce set-up time and lift throughput. The clamp requires minimal routine maintenance thanks to its robust construction and corrosion protection; scheduled inspections typically focus on pneumatic connections and wear points only. Engineers will find the device straightforward to specify for benches, jigs and small-batch production, while purchasing benefits from a proven component supplied through established distribution channels. Integration with existing compressed-air systems is direct, offering immediate functional gains without complex retrofits. For technical consultation, delivery options and integration support for the Kukamet 652 pneumatic clamp, contact Metav Werkzeuge for professional advice and reliable supply from Emmerich. Technical Data Article number: 652-3-D-C3 Manufacturer: Kukamet Model: 652 Facts Holding force (max): 2,500 N Pneumatic force (max): 2,000 N Arm length: 167 mm Clamping angle: 90° eClass: 21021004 ETIM: EC011973 Special features Vertical-foot mounting Zinc-plated finish Massive holding arm Pneumatic actuation Category: Clamps FAQ What clamping forces can be expected from this unit? The Kukamet 652 pneumatic clamp provides a holding force of up to 2,500 N with pneumatic actuation delivering up to 2,000 N, suitable for demanding production clamping tasks. How is the clamp mounted to a fixture? Mounting is by a vertical foot designed for secure attachment; the vertical-foot mounting and 90° clamping angle allow compact installation in standard fixture plates. Is the surface finish suitable for workshop environments? Yes. The clamp features a zinc-plated finish that offers corrosion resistance and helps maintain performance in typical workshop atmospheres. What applications is the clamp best suited for? The device is intended for jigs, fixtures, assembly and light machining operations where fast pneumatic actuation and consistent clamping force improve throughput and part quality. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 66mm Horizontal Clamp With 1000N Closing Force, Zinc Plated, Massive Arm & Safety Lock - Kukamet
Combining a massive holding arm, 1,000 N clamping force and a zinc-plated finish yields a compact, robust fixture that secures workpieces reliably in demanding shop environments; order directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 112 — zinc-plated, 1,000 N clamping force, vertical-foot mount (Kukamet) Horizontal clamp 112 is a compact lever-style clamp designed for secure horizontal fixturing in metalworking and general workshop applications, mounted via a vertical foot for 90° operation. *Zinc-plated steel body for corrosion resistance *1,000 N maximum clamping force *Massive holding arm with safety lock *Vertical-foot mounting, 90° operation Consistent holding for repeatable production The combination of a 1,000 N clamping force and a 1,200 N holding force provides a clear technical basis for repeatable fixture performance in small-batch production or jigs. The lever mechanism is configured for horizontal action at 90°, ensuring the clamping direction is constant and predictable. A massive holding arm with an integrated safety lock reduces the risk of unintentional release during machining or assembly, which contributes to process reliability and fewer reworks. Thanks to the robust mechanical design, cycle-to-cycle variation is minimised, supporting tighter tolerances on finished parts. Space-saving design that integrates easily into jigs With a vertical-foot mounting and a compact 66 mm arm, this clamp is intended for fixtures where space is limited but secure holding is mandatory. The low profile and small mass (approx. 0.2 kg) facilitate multiple mounting positions without adding bulk to a fixture plate. The zinc-plated finish protects exposed surfaces, helping maintain appearance and function in humid or mildly corrosive workshop atmospheres. These characteristics make the clamp suitable for retrofitting into existing tooling layouts or for inclusion in new fixture concepts where accessibility and orientation are constraints. Robust materials and simple upkeep for long service life Constructed from zinc-plated steel and featuring a massive holding arm, the clamp is built to withstand workshop conditions while keeping maintenance straightforward. The lever action and the mechanical safety catch are designed for long duty cycles with minimal interventions; routine checks and lubrication are generally sufficient to preserve function. The simple geometry avoids complicated service procedures, enabling faster turnaround during maintenance windows and reducing overall downtime. For purchasers seeking dependable clamping hardware from a trusted supply channel, the unit’s specification supports continued operation with predictable maintenance effort. For supply, compatibility checks or delivery from stock, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com; our specialists advise on application and fast dispatch Technical data Article number: 112-2-D-L-C1 GTIN: 8680731500448 Manufacturer: Kukamet Facts Arm: 66 mm Angle: 90° Maximum clamping force: 1,000 N Maximum holding force: 1,200 N Weight: 0.2 kg EClass: 21041719 ETIM: EC011973 Special features Material: zinc-plated steel Mounting: vertical foot Massive holding arm Safety lock Category: clamps FAQ What is the maximum clamping force of the clamp? The clamp delivers a maximum clamping force of 1,000 N; the holding capacity is specified as 1,200 N for the Horizontal clamp 112 (SKU 112-2-D-L-C1). Is the clamp suitable for humid or mildly corrosive environments? The zinc-plated steel finish provides corrosion resistance, making the clamp suitable for workshops where occasional moisture or mild corrosion risk is present. How is the clamp mounted and what is the operating angle? Mounting is via a vertical foot and the clamp operates at a 90° angle, enabling horizontal clamping action while saving fixture plate space. What safety features are incorporated? A mechanical safety lock is integrated into the lever system and the design includes a massive holding arm to reduce the chance of accidental release. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 66mm Horizontal Clamp with Heavy Duty Arm, Safety Locked, 1,200 N Holding Force - Kukamet
Benefit from a robust, compact clamping solution that combines a massive holding arm, a secure safety lock, and galvanised corrosion resistance for dependable fixture performance. Order the Horizontal clamp 111 directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 111 — Kukamet horizontal lever clamp with 66 mm arm and safety lock The Horizontal clamp 111 is a compact horizontal lever clamp designed for reliable fixture and assembly work, offering a strong holding capability and a galvanised finish for extended service life. Robust holding arm with safety lock Zinc-plated for corrosion resistance Holding force up to 1,200 N Compact 66 mm arm and 90° locking Dependable clamping power for fixtures and jigs The clamp delivers reliable holding force and controlled pressure that suits repetitive assembly and jigging operations. With a maximum holding force of 1,200 N and a maximum pressure of 1,000 N, the device provides the mechanical stability required for secure workholding. The safety-locking mechanism reduces the risk of unintended release during handling, while the massive arm construction minimises elastic deformation under load. These technical characteristics translate into fewer repositioning steps and more consistent process quality in production environments. Long service life thanks to corrosion protection and compact design Constructed from galvanised steel, the unit resists corrosion in workshop environments and maintains dependable operation over time. The small 66 mm arm and the 90° locking position make the clamp suitable for tight fixture layouts where space is limited. At just 0.2 kg, the component adds minimal mass to assemblies, simplifying jig balance and reducing dynamic stresses during automated handling. The horizontal mounting foot ensures a low-profile attachment to plates and rails, enabling straightforward integration into existing tooling. Easy integration and safe operation in production workflows As a lever clamp with horizontal base mounting, the product supports fast manual locking and quick visual confirmation of engagement, improving throughput at assembly stations. The safety lock provides secondary retention to prevent accidental opening, which benefits both manual workbenches and automated cells where inadvertent release can cause downtime. The compact form factor and standardised mechanical parameters make it suitable for serial installations, reducing complexity when specifying multiple clamping points and simplifying spare-part management. For secure and immediate supply of Kukamet lever clamps, contact Metav Werkzeuge for product selection and delivery from our Emmerich stock; our specialists are available at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: 111-2-D-L-C1 GTIN: 8680731500097 Manufacturer: Kukamet eCl@ss: 21041719 ETIM: EC011973 Facts Arm length: 66 mm Locking angle: 90° Maximum pressure force: 1,000 N Maximum holding force: 1,200 N Weight: 0.2 kg Special features Galvanised (zinc-plated) finish Waagerechter Fuß (horizontal foot) mounting Massive holding arm and safety-locking Lever clamp type (lever action) Catalogue PDF available FAQ What materials can be clamped with this device? The Horizontal clamp 111 is designed for general workholding; its galvanised steel construction suits common workshop materials and fixture components rather than acting as a cutting or machining tool. How is the clamp mounted to a fixture plate? Mounting is effected via the horizontal foot; the clamp’s low-profile base allows attachment to plates or rails in standard jig and fixture setups. How does the safety lock function improve operational safety? The safety lock secures the lever in the engaged position, preventing accidental release and maintaining the set clamping force during handling and intermittent loads. Is the 66 mm arm suitable for confined spaces? Yes. The 66 mm arm combined with a 90° locking position provides a compact footprint that is beneficial in tight fixture arrangements. Are technical drawings or catalogue pages available for planning? A catalogue PDF is available for specification and planning purposes, showing dimensions and installation guidance for the Horizontal clamp 111. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 66mm Horizontal Clamp With Massive Holding Arm, 1,200N Holding Force, Zinc Plated - Kukamet
Take advantage of the combination of a solid holding arm, galvanised construction and compact form factor for consistent clamping in fixtures and jigs. Order the component directly via Metav Werkzeuge or consult our specialists for application advice. 111 horizontal clamp by Kukamet — Solid-arm design, galvanised steel The 111 horizontal clamp is a compact horizontal clamping unit designed for secure fixture and jig applications in workshops and light industrial environments. Solid holding arm for increased stability Galvanised steel for corrosion resistance 1200 N retaining force, 1000 N clamping force Horizontal foot mount with 90° clamping angle Reliable clamping performance for machining and assembly The clamp delivers clear, measurable performance: a clamping force (1000 N) for workpiece securing and a higher retaining force (1200 N) to resist lateral movement during handling. These figures support repeatable, process-stable results when used in small-series production or fixture setups. The forces quoted refer to static capacities under recommended mounting conditions; this ensures predictable behaviour during light machining, assembly or inspection tasks. Such quantified performance facilitates integration into process planning and reduces the need for over‑engineering of fixtures. Durable construction that lowers maintenance needs A galvanised finish protects the unit against corrosion, extending service life in humid or mildly corrosive environments. The clamp’s solid holding arm is engineered for torsional rigidity, reducing deflection under load and maintaining alignment of clamped parts. The compact 66 mm arm length supports close-packed fixturing without compromising stability. This combination of protective coating and robust geometry results in fewer replacements and less unscheduled downtime, which contributes to measurable savings over the lifespan of the fixture. Space-efficient layout for versatile fixture design The horizontal foot mounting and the 90° clamping orientation allow the clamp to be positioned flush to surfaces or rails, optimising bench and fixture real estate. The 90° clamping angle provides a consistent stop for workpieces, simplifying repeatable positioning in jigs. The compact footprint is particularly valuable for modular tooling systems where accessible clamping and unobstructed tool paths are critical. This design supports both manual and semi‑automated processes by keeping the clamp out of the immediate work envelope while still delivering secure hold. Straightforward specification and workshop suitability Identified by SKU and GTIN for easy procurement, the clamp is suitable for workshop and small industrial settings that require robust, easy-to-specify components. The combination of measurable forces, a 66 mm arm and a galvanised finish makes the unit a practical choice for general fixturing tasks, repetitive assembly or inspection stations. The design is compatible with common bench and fixture standards, enabling rapid retrofitting into existing jigs. The 111 is therefore a reliable building block for consistently repeatable clamping solutions. For tailored application advice or to secure the Kukamet 111 horizontal clamp for your fixtures, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and supply from Emmerich Technical data SKU: 111-2-D-C1 GTIN: 8680731500066 Category: Spanner ETIM: EC011973 ECLASS: 21041719 Facts Arm length: 66 mm Clamping force: 1000 N Retaining/holding force: 1200 N Clamping angle: 90° Weight: 0.204 kg Special features Material: galvanised steel Mounting: horizontal foot Massive/solid holding arm Suitable for fixture and jig applications FAQ What clamping and holding forces does the unit provide? The unit provides a clamping force of 1000 N and a retaining (holding) force of 1200 N as specified for the Kukamet 111 horizontal clamp. Is the clamp suitable for use in humid or mildly corrosive environments? Yes, the galvanised finish of the clamp offers corrosion resistance, making it suitable for humid conditions and typical workshop atmospheres. Can the clamp be mounted on common bench plates or T-slot rails? The clamp uses a horizontal foot mount and a 90° clamping orientation, which allows mounting on flat surfaces and many standard fixture layouts. How does the arm length affect fixture layout? The 66 mm arm length provides a compact reach that supports dense fixture arrangements while maintaining effective leverage and stability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 66mm Horizontal Clamp With Solid Arm, 1,000 N Thrust / 1,200 N Hold - Kukamet
Take advantage of a compact, robust clamping solution that combines a solid holding arm with reliable forces of up to 1,200 N for repeatable fixation in small jigs and fixtures. Order the unit through Metav Werkzeuge or contact our consultants for technical advice and stock information. Horizontal Clamp 111 — Horizontal lever clamp with 1,200 N holding force (Kukamet) A Horizontal Clamp 111 designed as a horizontal lever clamp for secure workpiece fixation in machining, assembly and inspection setups, offering a compact footprint and dependable repeatability. Solid 66 mm holding arm Horizontal foot for flush mounting 1,200 N max holding force 90° locking angle, robust lever Stable clamping in confined workspaces The clamp is engineered for fixtures where space is limited and repeatable results are required. Its solid holding arm with a length of 66 mm provides a stable contact area, while a lightweight body (approx. 0.204 kg) keeps fixture mass low. The rated 1,200 N holding force is provided by the lever mechanism, enabling consistent retention of components during light machining and assembly tasks. For planners and production engineers, this combination reduces rework and accelerates setup cycles without adding significant mass to the jig. Precise mounting and reliable locking Designed with a horizontal foot for flush or base mounting, the device is suited to perpendicular and lateral clamping arrangements on workbenches and tooling plates. The 90° locking angle ensures a clear audible and tactile engagement, simplifying operator verification of a secure clamp. The lever action converts manual input into a controlled clamping force; explained simply, the mechanical linkage amplifies hand movement into holding force, which means consistent clamping pressure is achieved with limited operator effort. Durable finish and straightforward integration A blackened finish provides basic surface protection and reduces glare in bright production environments, while the massive holding arm and robust lever design are intended for repetitive industrial use. The compact unit integrates smoothly into modular fixture systems and can be combined with standard dowels and fasteners for quick retrofitting. Component identification is straightforward for procurement and inventory: SKU B111-2-D-C1 and GTIN are available for ordering and traceability purposes. Contact Metav Werkzeuge for delivery options and technical guidance on the Kukamet horizontal lever clamp from our Emmerich stock. Technical data Article number: B111-2-D-C1 GTIN: 8680731506952 Manufacturer: Kukamet Facts Arm length: 66 mm Angle: 90° Weight: 0.204 kg Max clamping force: 1,000 N Max holding force: 1,200 N Special features Solid/masÂsive holding arm Horizontal foot for flush/base mounting Blackened finish Robust lever mechanism FAQ What maximum holding force does the clamp provide? The clamp delivers a maximum holding force of 1,200 N for secure retention; the mechanical drive also allows a maximum clamping thrust of 1,000 N for operational force considerations. Is the clamp suitable for mounting on a flat tooling plate? Yes. The horizontal foot design allows flush mounting on tooling plates and ensures stable positioning in modular fixtures for machining and assembly. How compact is the unit for confined fixtures? With a 66 mm holding arm and a weight of approximately 0.204 kg, the clamp is compact and well suited to confined workstations and lightweight jigs. What surface protection does the clamp have? The device features a blackened finish that provides basic corrosion resistance and reduces reflected light in bright environments. Which SKU should be ordered for inventory and procurement? Order using SKU B111-2-D-C1; the GTIN 8680731506952 is available for catalogue and system entry. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TĂśRKÄ°YE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 682 Pneumatic Clamp Without Cylinder, 6500 N Thrust / 30000 N Hold, Galvanised - Kukamet
Benefit from a 30,000 N maximum holding force combined with a 6,500 N clamping capacity in a galvanised pneumatic clamp supplied without an integrated pneumatic cylinder; this combination delivers robust fixture retention and straightforward integration into existing actuator systems. Order or request specification support via Metav Werkzeuge for reliable delivery and technical consultancy. Kukamet 682 Pneumatic clamp — galvanised, 30,000 N holding force The Kukamet 682 is a heavy-duty pneumatic clamp designed for horizontal-foot mounting in industrial fixturing, supplying high holding and clamping capacities while allowing external actuation. Galvanised construction for corrosion resistance Maximum holding force 30,000 N Maximum clamping force 6,500 N Horizontal-foot mounting for stable installation Dependable clamping capacity for demanding fixtures The clamping unit delivers a high holding force of 30,000 N and a clamping force of 6,500 N, ensuring secure retention of workpieces in repetitive production and machining tasks. These figures indicate suitability for medium to heavy-duty fixturing where reliable workpiece retention prevents slippage and reduces rework. The numerical performance supports planning of fixture layouts and cycle times and allows comparison with alternative clamping solutions. Corrosion resistance and mechanical longevity Constructed with a galvanised surface, the device resists corrosion in workshop environments and maintains consistent contact geometry over long service intervals. The protective finish reduces the frequency of surface maintenance and minimises the risk of contamination in production processes. The relatively compact mass of 11.6 kg balances robustness with manageable handling during installation, while the zinc coating supports longevity under typical shop-floor conditions. Flexible integration and mounting advantages With a horizontal foot mounting arrangement, the clamp is intended for stable attachment to fixture plates and subplates, simplifying alignment within modular tooling systems. Supplied without a pneumatic cylinder, the unit is compatible with third-party actuators or central pneumatic systems, allowing planners to select stroke and pressure characteristics that match specific cycle requirements. The design therefore supports customisation of actuation while keeping the clamp’s core mechanical ratings constant. Practical operation and service considerations The mechanism’s straightforward design reduces downtime for routine inspection and replacement of wear parts. Where regular cycle rates and high clamping loads are expected, the clear specification of maximum holding and clamping forces enables maintenance scheduling based on measured loads rather than guesswork. Integration into production cells benefits from the unit’s clear numeric data and the absence of an integrated cylinder, which simplifies both procurement and spares management. Contact Metav Werkzeuge for tailored integration advice or to arrange procurement from Emmerich; technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 682-8-M Model: 682 GTIN: 8680731505108 ETIM: EC011973 Core figures Maximum holding force: 30,000 N Maximum clamping force: 6,500 N Weight: 11.6 kg Materials & features Galvanised surface Horizontal foot mounting Supplied without pneumatic cylinder Category: Clamp FAQ What is the maximum holding force of the Kukamet 682? The Kukamet 682 pneumatic clamp provides a maximum holding force of 30,000 N, specified for stable retention in demanding fixturing applications. Is a pneumatic cylinder included with the clamp? No, the clamp is supplied without a pneumatic cylinder, enabling integration with external actuators or central pneumatic systems to match specific stroke and pressure requirements. What mounting arrangement does the device use? The unit features a horizontal foot mounting style, designed for secure attachment to fixture plates and modular tooling systems. Which surface treatment does the clamp have? The clamp is galvanised, offering corrosion resistance suitable for industrial workshop environments and reducing surface maintenance. How heavy is the clamp and does weight affect installation? The device weighs 11.6 kg, a mass that balances durability with manageable handling during installation and alignment. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 68mm Horizontal Clamp With Massive Clamping Arm And Safety Lock, 2300 N Closing Force - Kukamet
Robust combination of a galvanised body, massive holding arm and up to 2,500 N holding force ensures secure, repeatable clamping for jigs and fixtures; order the Horizontal clamp 112 directly via Metav Werkzeuge or consult their specialists for application advice. Horizontal clamp 112 — Kukamet horizontal toggle clamp with vertical-foot mounting and 2,500 N holding force A Horizontal clamp 112 engineered for reliable workholding in fixtures and production jigs, mounted on a vertical foot for compact installation and rapid lever action clamping. Galvanised steel construction 68 mm arm reach for compact fixtures Up to 2,500 N holding force Vertical-foot mounting for low-profile set-ups Safety locking mechanism and robust arm Secure, measurable clamping for series production The clamp provides clearly defined performance values: a maximum clamping force (push) of 2,300 N and a maximum holding force of 2,500 N, specified in newtons for objective comparison in procurement and machine design. These figures support predictable seating forces when securing parts for machining, assembly or inspection, reducing rework. The massive holding arm and integrated safety locking convert lever motion into a positive toggle action that resists accidental release, which is particularly valuable in repetitive tasks where consistent clamping is essential. Compact mounting and fast cycle times Designed for installation on a vertical foot, the clamp minimises lateral space while delivering a horizontal clamping action at a right angle (90°). The 68 mm arm reach balances compactness with clearance for most small to medium fixtures; at only 0.3 kg the component adds negligible mass to a jig while remaining robust. The lever-style mechanism permits rapid engagement and disengagement, improving throughput on manual pick-and-place or semi-automated stations. Where set-up time is critical, the clamp’s simple mechanics allow quick integration without complex drives or pneumatics. Durability and low-maintenance operation for the workshop Constructed from galvanised steel, the unit resists corrosion and keeps maintenance intervals long even in humid environments. The solid arm and zinc coating ensure longevity under frequent cycling, while the simple mechanical design reduces points of failure. Specification and SKU data allow traceability in procurement and spare-part planning: the model is a straightforward toggle clamp suited to production environments where reliability and predictable performance are the primary criteria. For robust, repeatable clamping with a galvanised 2,500 N hold, contact Metav Werkzeuge for purchase options and technical advice. Technical Data SKU: 112-3-D-L-C1 GTIN: 8680731500523 eClass: 21041719 ETIM: EC011973 Facts Arm length: 68 mm Angle: 90° Weight: 0.3 kg Max clamping force: 2,300 N Max holding force: 2,500 N Materials & Features Material: Galvanised steel Mounting: Vertical foot Massive holding arm Safety locking mechanism Category: Clamp / toggle clamp FAQ What maximum holding force does this clamp provide? The Kukamet Horizontal clamp 112 delivers a maximum holding force of 2,500 N, specified to support predictable workholding in fixtures. How is the clamp mounted in a jig or fixture? Mounting is via a vertical foot; the design provides a low-profile horizontal clamping action suited for compact fixture layouts. Is the clamp suitable for corrosive or humid environments? The galvanised steel construction of the Horizontal clamp 112 offers enhanced resistance to corrosion compared with untreated steel, extending service life in damp conditions. What is the effective arm reach and how does it affect clearance? The clamping arm measures 68 mm, providing a balance between compact installation and sufficient clearance for small to medium workpieces. Does the clamp include a safety mechanism to prevent accidental release? Yes, the unit features a safety locking mechanism and a robust holding arm to prevent unintended opening during operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 68mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 2.3kN Thrust - Kukamet
Take advantage of the combination of compact design, high holding force and a secure safety lock for reliable clamping in fixtures and jigs. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask the consultants for application-specific advice. Horizontal clamp 112 — 68 mm arm, 90° lever clamp (Kukamet) The Horizontal clamp 112 is a robust 90° lever clamp designed for secure horizontal workholding in jigs, fixtures and fixed machining stations. Massive hold arm with safety lock 68 mm arm for compact setups Holding force up to 2,500 N Vertical-foot mounting for fixed stations Consistent, measurable clamping performance for production use The clamp delivers quantifiable results: clamping force of 2,300 N and a holding force of 2,500 N, providing stable fixation during machining and assembly operations. These values translate into fewer rework cycles and a predictable process window when the clamp is integrated into repetitive production tasks. The lever mechanism ensures quick actuation while the pressure figures support use with medium-duty fixtures, making the component suitable for series production and workshop jigs alike. Space-saving format that eases fixture design With a compact 68 mm arm and an overall mass close to 0.3 kg, the unit is intended for applications where space is limited but process reliability remains essential. The vertical-foot mounting facilitates direct attachment to plates and bases without elaborate adapters, simplifying layout and reducing setup time. The 90° lever orientation helps keep the clamping profile low, allowing close stacking of clamps on a fixture plate and efficient use of working area. Built for durability and operator safety Constructed with a blackened finish for surface protection and featuring a massive hold arm and mechanical safety lock, the clamp is designed to withstand regular workshop use while maintaining consistent clamping geometry. The safety lock prevents accidental release under load, supporting safer changeover procedures and reducing the risk of component movement during machining. The robust build quality reduces long-term maintenance requirements and contributes to consistent process quality. Easy integration into standard tooling and fixtures As a 90° lever clamp, the unit is compatible with a wide range of jigs, fixtures and assembly stations where repeatable horizontal clamping is required. The combination of compact dimensions, measurable force ratings and standard mounting style enables rapid substitution into existing setups or incorporation into new fixture designs. For buyers seeking a reliable, no-frills clamping solution for medium-duty applications, this lever clamp offers a practical balance of performance and simplicity. Choose Kukamet’s Horizontal clamp 112 for secure, repeatable clamping — contact Metav Werkzeuge for procurement guidance or detailed technical clarification. Technical data Article number: B112-3-D-L-C1 Manufacturer: Kukamet eCl@ss: 21041719 ETIM: EC011973 Facts Arm length: 68 mm Clamping force (max): 2,300 N Holding force (max): 2,500 N Angle: 90° Weight: 0.3 kg Special features Vertical-foot mounting Massive hold arm Safety locking mechanism Blackened finish 90° lever clamp FAQ What clamping and holding forces does the clamp provide? The clamp achieves a maximum clamping force of 2,300 N and a holding force up to 2,500 N, suitable for medium-duty workholding applications. Can the clamp be mounted on a fixture plate? Yes, the vertical-foot mounting is designed for direct attachment to plates and bases, enabling straightforward integration into fixtures. What material protection is applied to the surface? The component has a blackened finish for surface protection and improved wear resistance during workshop use. Is there a safety feature to prevent accidental release? A mechanical safety lock is incorporated to prevent unintended opening under load and to support safe operation during changeovers. Which SKU identifies this model for ordering? The clamp is listed under SKU B112-3-D-L-C1 for procurement and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 68mm Horizontal Clamp With Massive Holding Arm, 2.5kN Hold, 2.3kN Thrust - Kukamet
Take advantage of a compact, robust lever clamp that combines a massive holding arm with a high clamping capability to secure components reliably in tight fixtures. The combination of a 68 mm reach, a vertical-foot mounting and proven holding capacity supports steady production processes. Order directly via Metav Werkzeuge or consult the technical team for integration advice. Kukamet Horizontal Clamp 112 — 68 mm reach, 2,300 N clamping force The Horizontal Clamp 112 is a compact lever clamp designed for secure horizontal workholding in jigs, fixtures and small assembly stations. Massive holding arm for extra rigidity 68 mm reach for compact clamping setups 2,500 N maximum holding force Vertical-foot mounting for stable installation Stable contact and repeatable positioning A massive holding arm and defined lever geometry deliver consistent pressure across cycles, transforming applied actuation into a reliable clamping result. With a rated 2,300 N clamping force and a 2,500 N holding force, the unit keeps workpieces immobile during machining or assembly, reducing rework and inspection time. The design supports precise positioning in production tooling, where stable contact and repeatability are essential for quality assurance. Compact layout for space-constrained fixtures The compact 68 mm reach and right-angled orientation make this clamp suited to dense fixture arrangements and small workstations. The vertical-foot mounting allows secure attachment to baseplates or tooling plates while keeping the clamping profile low. At approximately 0.292 kg, the component contributes minimal mass to moving subassemblies, simplifying dynamic balance and handling in automated setups. Durable finish and dependable duty cycle A blackened finish provides basic surface protection and a uniform appearance that resists light abrasion in workshop environments. The clamp operates as a lever clamp, converting operator or machine input into a strong holding action with minimal maintenance requirements. Specified forces indicate suitability for repetitive clamping tasks in production runs, and the construction supports long-term wear resistance under typical industrial conditions. Easy integration into existing tooling systems Mounting by a vertical foot and a 90° working angle allow straightforward incorporation into existing fixture plates and jig systems. The compact form factor and clear mechanical specification simplify layout calculations and ensure predictable interaction with neighbouring clamps or locators. The robust arm and defined force ratings support secure workholding without complex adjustments, enabling efficient setup changes and reduced downtime. Enquire with Metav Werkzeuge for tailored integration advice or a quotation on the Kukamet Horizontal Clamp 112 — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B112-3-D-C1 GTIN: 8680731507232 Manufacturer: Kukamet Facts Arm length: 68 mm Clamping force, max: 2,300 N Holding force, max: 2,500 N Angle: 90° Weight: 0.292 kg Special features Mounting: vertical foot Material/finish: blackened finish Massive holding arm Category: Clamps FAQ What materials is this clamp suitable for? The Kukamet Horizontal Clamp 112 is a mechanical lever clamp suitable for general workholding applications; material compatibility depends on the fixture design rather than the clamp itself. How does clamping force differ from holding force? Clamping force (2,300 N for this model) refers to the generated actuation pressure, while holding force (2,500 N) indicates the maximum static retention capacity once the clamp is engaged in the Kukamet Horizontal Clamp 112. What mounting options are available? This model features a vertical-foot mounting style for attachment to baseplates and tooling plates, enabling low-profile installation in jigs and fixtures. Is the clamp corrosion-resistant? The blackened finish provides basic surface protection and improved wear characteristics for workshop environments when used as intended with the Kukamet Horizontal Clamp 112. Can the clamp be used in automated production cells? Yes, the compact design, defined force specifications and repeatable lever action make the clamp suitable for use in automated fixtures and assembly stations where mechanical actuation is compatible. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 68mm Horizontal Clamp With Massive Holding Arm, 2.5kN Holding Force - Kukamet
Robust clamping performance combined with a compact footprint makes this lever clamp ideal for fixtures where space and repeatability are critical; the massive holding arm and 2.5 kN holding force ensure secure workpiece retention. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 111 (B111-3-D-C1) by Kukamet — 90° lever clamp, 2.5 kN holding force A Horizontal clamp 111 designed for secure 90° positioning in jigs and fixtures, featuring a heavy-duty holding arm and a horizontal mounting foot for compact assembly. Massive holding arm for durable clamping 2.5 kN maximum holding force Compact 68 mm arm length Horizontal mounting foot, 90° open angle Improved fixture reliability through high holding force The solid lever design delivers a holding force of 2,500 N (2.5 kN) and a maximum pressing force of 2,300 N, providing measurable stability during machining or assembly cycles. This mechanical performance reduces micro-movement of the workpiece, which in turn increases process reliability and repeatability. The compact arm minimises interference in dense fixtures while retaining a high clamping capacity, making the component suitable for repetitive, short-cycle operations in production and workshop environments. Space-saving mounting and durable finish for long service life Equipped with a horizontal mounting foot and a fixed 90° open angle, the clamp integrates easily into base plates and custom jigs without additional adapters. The black blued finish offers corrosion resistance and wear protection for the steel components, helping to preserve contact surfaces and geometry over time. The massive arm construction concentrates material where strength is needed, lowering the risk of deformation under load and reducing the frequency of maintenance interventions. Fast, repeatable clamping that improves throughput Weighing just 0.3 kg and featuring a 68 mm lever arm, the clamp combines low mass with high effectiveness; the low inertia speeds manual handling and positioning in assembly tasks. The lever mechanism provides a clear tactile engagement, allowing operators to apply consistent clamping force quickly and with minimal adjustment. For small to medium production runs, the result is reduced setup time and stable process outputs, supporting smoother production flow and fewer rejected parts. Select the Kukamet Horizontal clamp 111 for dependable 2.5 kN clamping in compact fixtures — contact Metav Werkzeuge for tailored application advice and product availability: info@metav-werkzeuge.com / +49 2822 7131930 Technical data SKU: B111-3-D-C1 GTIN: 8680731506990 Manufacturer: Kukamet Eclass: 21041719 ETIM: EC011973 Facts Arm length: 68 mm Holding force max: 2,500 N Pressing force max: 2,300 N Angle: 90° Weight: 0.3 kg Special features Massive holding arm Horizontal mounting foot Black blued finish Compact lever clamp design FAQ What is the maximum holding force of this clamp? The clamp offers a maximum holding force of 2,500 N (2.5 kN); the Kukamet Horizontal clamp 111 is specified for demanding retention in fixtures. How is the clamp mounted in a fixture? Mounting is via a horizontal mounting foot designed for secure attachment to base plates and jigs; the 90° open angle suits perpendicular clamping arrangements. What material and finish are used for the clamp? The unit is supplied with a black blued finish on steel components to enhance wear resistance and surface protection. Is the clamp suitable for tight or compact assemblies? Yes, the compact 68 mm arm and low weight (0.3 kg) make the clamp suitable for confined fixture spaces where interference must be minimised. Which SKU should be ordered for this model? Order reference SKU B111-3-D-C1 for the Kukamet Horizontal clamp 111. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 68mm Horizontal Clamp With Solid Holding Arm, 2.3kN Closing Force, Galvanised - Kukamet
Robust galvanised construction, a 68 mm clamping arm and up to 2,500 N holding force combine to deliver reliable, repeatable clamping for light to medium jigs and fixtures. Order the clamp directly via Metav Werkzeuge or contact the consultants for detailed technical advice. Horizontal clamp 111 – horizontal clamp with 68 mm arm, galvanised (Kukamet) The Horizontal clamp 111 is a compact horizontal mounting clamp for fixtures and jigs, offering a 68 mm arm and a galvanised body for secure 90° clamping in workshop and production environments. 68 mm clamping arm for compact setups Up to 2,500 N holding force Galvanised corrosion-resistant finish Horizontal foot mounting at 90° Consistent clamping performance that improves process reliability The 68 mm arm and a massive holding arm deliver a low-profile yet stable grip that helps reduce part movement during machining and assembly. The specified figures — 2,300 N maximum pressing force and 2,500 N maximum holding force — describe two different functions: pressing force is the actuating load applied by the lever, while holding force is the sustained grip on the workpiece. Designed for repeated cycles, this clamp provides measurable, reproducible performance that supports process standardisation and reduces rework. The compact design and defined 90° clamping geometry simplify fixturing calculations and help maintain consistent tolerances. Quick mounting and simple integration into fixture assemblies Equipped with a horizontal foot for secure attachment, the clamp integrates easily into assembly jigs and fixture plates without extensive modification. At just 0.3 kg, the unit is lightweight enough to be repositioned during prototyping yet rigid enough for stable operation in serial production. The horizontal foot and compact arm length reduce space requirements on the fixture plate, enabling denser tooling layouts and faster changeovers. Precision in alignment and easy mechanical operation translate into shorter setup times and higher throughput on the shop floor. Durable finish and robust components for lower maintenance A galvanised finish protects the clamp from corrosion in workshop environments and simplifies upkeep; the protective coating extends service intervals and maintains consistent surface condition where contact and sliding occur. The robust construction of the holding arm resists deformation under repeated loading, which preserves clamping accuracy over time and minimises downtime for replacement or adjustment. Built to withstand everyday industrial use, this clamp offers economical longevity that supports reliable production schedules. Choose the Kukamet 111 horizontal clamp for dependable 2,500 N holding performance — contact Metav Werkzeuge for procurement and bespoke advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 111-3-D-C1 GTIN: 8680731500141 Manufacturer: Kukamet Facts Clamping arm: 68 mm Max pressing force: 2,300 N Max holding force: 2,500 N Angle: 90° Weight: 0.3 kg Special features Galvanised finish Massive holding arm Horizontal foot mounting Category: Clamps FAQ What is the difference between pressing force and holding force? Pressing force refers to the actuating load (listed as 2,300 N), while holding force is the sustained clamp grip (listed as 2,500 N) for the Horizontal clamp 111 Can the clamp be mounted on standard fixture plates? Yes, the horizontal foot mounting is designed for secure attachment to fixture plates and assembly jigs, enabling straightforward integration How much space does the clamp require on a jig? The 68 mm clamping arm and compact body minimise footprint, allowing denser tooling arrangements on the fixture plate Is the surface finish suitable for humid workshop environments? The galvanised finish provides corrosion resistance and helps maintain reliable operation in typical shop conditions What is the product SKU for ordering and reference? The clamp is listed under SKU 111-3-D-C1 for procurement and technical reference Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 850 N Horizontal Clamp With Massive Holding Arm And Safety Lock, Blackened Finish - Kukamet
Take advantage of a compact, high-force clamp that combines a 93 mm massive holding arm with a safety locking mechanism for reliable fixture work. The horizontal mounting foot and 90° orientation enable low-profile installation and repeatable clamping. Order the clamp directly via Metav Werkzeuge or consult the technical team for specification support. Horizontal clamp 111 — compact horizontal toggle clamp with 93 mm arm and safety lock Horizontal clamp 111 is a lever-style fixture clamp designed for secure, repeatable workholding in jigs and assemblies Robust 93 mm holding arm 90° horizontal mounting foot Safety locking mechanism Holding force up to 1,000 N Secure clamping for precision jigs and fixtures The clamp delivers a controlled, repeatable hold by combining a massive holding arm with defined clamping and holding capacities. A maximum clamping force of 850 N and a holding force of 1,000 N are specified, ensuring that components remain stationary during machining, assembly or inspection tasks. The functional principle is simple: a lever action converts operator input into a consistent clamp load, which reduces variability in batch processes and improves process reliability. This makes the device suitable for small-series production and fixture-based manufacturing where repeatability matters. Low-profile installation that saves space on the workbench Designed for horizontal mounting, the clamp uses a horizontal mounting foot set at 90°, enabling installation flush to plates and baseplates. With an arm length of 93 mm and a nominal weight of 0.1 kg, the unit minimises encroachment into the working area and is suitable for confined fixtures. The compact footprint supports close-packed tool layouts and simplifies pallet or jig design, while the lever geometry allows fast engagement and release without additional mechanisms. Robust finish and safety features for long service life Constructed with a black oxide finish, the clamp is protected against light corrosion while maintaining a professional workshop appearance. The safety locking mechanism prevents accidental opening under vibration or during handling, increasing operational safety in automated or semi-automated setups. The combination of a solid arm and locking device reduces downtime caused by clamp slippage or unexpected release, contributing to a predictable production flow and lower rework rates. Integration, compatibility and application scenarios The lever-style clamp is identified as SKU B111-1-D-L-C2 and is offered by Kukamet for use in fixture building, assembly stations and inspection tables. As a toggle clamp, it is compatible with common mounting patterns for horizontal clamps and can be incorporated into welded frames or bolted plates. The simple mechanical design requires no external power and can be paired with mechanical stops or locating pins to form a complete workholding solution. Technical buyers benefit from clear specification data when designing fixtures or comparing component options. For fixture projects requiring a compact, high-holding-force clamp, contact Metav Werkzeuge to request a quotation or technical consultation for the Kukamet Horizontal clamp 111. Technical Data Article number: B111-1-D-L-C2 E-class: 21041719 ETIM: EC011973 Facts Arm length: 93 mm Angle: 90° Clamping force max: 850 N Holding force max: 1,000 N Weight: 0.1 kg Special features Mounting: horizontal foot Finish: black oxide Massive holding arm Safety locking mechanism Model: Horizontal clamp (111) FAQ What clamping and holding forces are specified for this clamp? The clamp is specified with a clamping force of 850 N and a holding force of 1,000 N, providing stable retention for fixture applications. Is the clamp suitable for use in compact fixtures with limited headroom? Yes, the compact lever design and 90° horizontal mounting foot allow installation in low-profile jigs and close-packed fixture layouts. What safety provision prevents accidental release during vibration? A dedicated safety locking mechanism is incorporated to secure the clamp once engaged and to prevent unintended opening. Can the clamp be used without additional power sources? The lever-operated design functions mechanically and requires no external power, making it suitable for manual and semi-automatic workstations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 850N Horizontal Clamp With Safety Lock, Zinc Plated, 1000N Holding Force - Kukamet
Benefit from a cost-effective, zinc-plated solution with a secure safety lock and up to 1000 N holding force for dependable fixture clamping; order directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal Clamp 112 — compact horizontal clamp with safety lock (Kukamet) A robust Horizontal Clamp 112 engineered for secure 90° clamping in fixtures and jigs, suited to small assemblies and repetitive production tasks. Zinc-plated finish for corrosion resistance Integrated safety lock for accidental-release prevention 90° orientation for horizontal fixture applications Up to 1000 N holding force for reliable retention Dependable clamping performance for everyday production The clamp combines a compact form with robust holding capacity, delivering a measured holding force of 1000 N and a clamping force of 850 N. These figures indicate the device’s ability to retain components under load and resist movement during machining, assembly or inspection operations. The zinc-plated surface provides corrosion protection in workshop environments, prolonging service life and reducing replacement intervals. By specifying measurable force values, planners and technicians can integrate the clamp into fixtures with predictable performance. Safe, repeatable operation that simplifies handling A mechanical safety lock prevents unintended release of the lever, reducing the risk of workpiece movement and improving operator confidence during repetitive cycles. The unit’s vertical foot mounting creates a secure attachment to production tables or jigs and enables a fixed 90° clamping orientation, which is helpful when positioning components for machining or assembly. The design minimises set-up time and offers consistent clamping action, supporting a smooth workflow with fewer interruptions. Compact design for tight fixtures and quick integration With a lightweight construction and compact footprint, the clamp is suited to confined fixtures where space savings are essential. The horizontal clamp geometry permits low-profile installation without sacrificing retention capability, while the included M5x35 pressure spindle allows fine contact adjustment. The straightforward mechanical arrangement supports maintenance-friendly use and keeps consumables to a minimum, contributing to lower total operating overhead in busy production environments. For secure fixture solutions backed by Kukamet build quality, contact Metav Werkzeuge for tailored advice and ordering assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data SKU: 112-1-L GTIN: 8680731500394 Brand: Kukamet Category: Spanner eClass: 21041719 ETIM: EC011973 Core specifications Clamping force: 850 N Holding force: 1000 N Angle: 90° Weight: 0.125 kg Pressure spindle: M5x35 Features & materials Material: zinc-plated Safety lock: yes Mounting: vertical foot Type: horizontal clamp Hand lever style: lever clamp FAQ What load can this clamp safely hold? The Horizontal Clamp 112 is specified with a holding force of 1000 N and a clamping force of 850 N, values that guide safe load expectations for fixture design. Is the finish suitable for humid workshop environments? The zinc-plated surface on the Kukamet clamp provides corrosion resistance appropriate for typical workshop and production settings. How is the clamp mounted to a fixture? This model uses a vertical foot mounting arrangement, enabling secure attachment to tables and jig plates for 90° horizontal clamping. Does the clamp include an adjustable contact element? Yes, the unit features an M5x35 pressure spindle for contact adjustment to fine-tune clamping pressure and accommodate part tolerances. Will the clamp prevent accidental release during operation? An integrated safety lock is provided to reduce the risk of unintended lever release and improve safety during repetitive handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 850N Horizontal Clamp With Safety Lock, Zinc-Plated, 1000N Hold Force - Kukamet
Compact, secure clamping with clear industrial specifications: the unit combines a holding force of up to 1,000 N, a clamping force of 850 N, and a zinc‑plated finish to deliver dependable, low‑maintenance performance in repetitive jigs and fixtures. Order the horizontal toggle clamp directly via Metav Werkzeuge or consult our advisors for application guidance. Horizontal toggle clamp 113 with angle base and safety lock — Kukamet The Horizontal toggle clamp 113 is a compact industrial clamp designed to secure workpieces at 90° for repetitive clamping tasks in jigs, fixtures and assembly operations. Angle base for 90° mounting Safety locking mechanism included Holding force up to 1,000 N Zinc-plated, corrosion-resistant finish Consistent force and compact design for repetitive production The clamp delivers a holding force of 1,000 N and a clamping force of 850 N, providing measurable and repeatable retention for short-cycle production tasks. The compact construction and low mass (approx. 0.155 kg) reduce inertia in movable fixtures and help maintain cycle times. The spindle thread M5x35 allows straightforward integration with standard fixture plates; the zinc-plated surface offers basic corrosion protection for workshop environments. These technical attributes support efficient part handling and predictable results in series workflows. Secure operation and simple, space-saving mounting Installation uses an angle base for right-angle mounting, making the clamp suitable for vertical or horizontal fixture faces where a fixed 90° orientation is required. A mechanical safety locking device prevents unintended release during handling or vibration, which increases operator safety and reduces the risk of loose workpieces. The compact footprint and straightforward mounting method minimise jig complexity and allow the clamp to be fitted into dense tooling layouts without extensive redesign. Practical benefits for workshops and assembly lines Engineered as a robust toggling solution, this clamp is aimed at applications that demand rapid, repeatable securing rather than fine positional adjustment. The corrosion-resistant finish and reliable locking mechanism reduce maintenance intervals and downtime, supporting continuous operation in production cells or manual assembly benches. Where quick clamping and unclamping are essential, the clamp provides dependable retention with minimal setup effort and clear numeric performance values for planning jigs and process validation. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet horizontal toggle clamp 113 into production fixtures and for supply from our Emmerich distribution centre: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 113-1-L GTIN: 8680731500738 Model: 113 Facts Clamping force max: 850 N Holding force max: 1,000 N Weight: 0.155 kg Angle: 90° Spindle thread: M5x35 Special features Material: zinc-plated Mounting: angle base Safety lock: yes Category: Clamps FAQ What is the maximum holding force of this clamp? The Kukamet horizontal toggle clamp 113 provides a holding force of up to 1,000 N and a clamping force of 850 N for predictable retention in jigs and fixtures. Can the clamp be mounted at right angles? Yes. The clamp uses an angle base for 90° mounting, making the 113 suitable for vertical or horizontal fixture faces where a right-angle orientation is required. Does the clamp include a safety mechanism? A mechanical safety locking device is integrated into the Kukamet clamp 113 to prevent accidental release during handling and vibration. What material finish does the clamp have? The Kukamet 113 is zinc-plated, offering corrosion-resistant properties suitable for standard workshop environments. Which spindle thread is provided for fixture integration? The clamp is supplied with an M5x35 spindle thread for straightforward fitting to common fixture plates. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 91mm Horizontal Clamp With Massive Arm, Safety Lock, 3.65kN Hold Force - Kukamet
Robust clamping performance meets compact installation: the combination of a massive holding arm with safety lock and a maximum holding force of 3,650 N ensures secure fixturing with minimal footprint. Fast integration is supported by the 90° angle-foot mount and a lightweight body, so ordering is straightforward — purchase the clamp directly via Metav Werkzeuge or consult the sales advisors for application advice. Horizontal clamp 113 — Kukamet horizontal clamp with massive holding arm and 3,650 N holding force The horizontal clamp 113 is a lever-style horizontal clamp designed for secure workpiece retention in fixtures and jigs, featuring an angle-foot mount for space-saving assembly. Massive holding arm with safety lock 3,650 N maximum holding force 90° angle-foot mounting Lightweight 0.94 kg body Secure retention that reduces rework and downtime The clamp delivers a maximum holding force of 3,650 N, combined with a maximum actuation force of 3,500 N, which is converted into consistent clamping pressure by the lever mechanism. This mechanical ratio means workpieces are held firmly during machining or assembly, reducing the risk of movement and subsequent rework. The presence of a safety locking mechanism prevents accidental release once the clamp is set, so fixtures remain reliable over repeated cycles. For production environments where repeatability and process stability matter, this robust clamp supports safer, more efficient workflows. Space-saving design for versatile fixture integration With an arm length of 91 mm and a 90° angle-foot mounting, the clamp is engineered for compact installation in confined jig spaces. The short arm reduces lateral projection while maintaining leverage, allowing the device to be positioned close to the workpiece without obstructing tooling paths. At 0.94 kg, the unit is light enough to be mounted on movable jigs or indexing fixtures without significantly increasing system mass. These characteristics make the clamp suitable for small to medium fixtures in metalworking, assembly stations and welding jigs where footprint and accessibility are decisive factors. Durable finish and straightforward installation for reliable daily use The body is delivered in a blackened finish, providing corrosion resistance and a professional appearance that suits workshop environments. The construction includes a massive holding arm, engineered for strength under repeated load, and an angle-foot base that simplifies secure attachment to fixture plates. Mechanical parts are designed to withstand frequent operation; routine inspection and lubrication of pivot points ensure long service life. The solid engineering of the clamp minimises maintenance intervals and supports steady production output over time. For procurement or technical clarification regarding the Kukamet horizontal clamp 113, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich. Technical data SKU: B113-4-D-L-C1 Manufacturer: Kukamet Category: Spanner Facts Arm length: 91 mm Angle: 90° Weight: 0.94 kg Maximum holding force: 3,650 N Maximum actuation force: 3,500 N Special features Mounting type: angle-foot Material/finish: blackened finish Massive holding arm Safety locking mechanism FAQ What is the maximum holding force of the clamp? The maximum holding force is 3,650 N for the Kukamet horizontal clamp 113 (SKU B113-4-D-L-C1), ensuring secure retention for typical fixture applications. How is the clamp mounted in a fixture? Mounting is performed via the 90° angle-foot, which allows the clamp to be fastened to a fixture plate with the holding arm positioned horizontally for lever action. What are the key dimensions to consider for layout? The most relevant dimension is the 91 mm arm length; the compact projection and angle-foot base make integration into tight layouts straightforward. Is the clamp suitable for frequent cycle use? Yes. The robust design with a massive holding arm and safety locking mechanism is intended for repeated operation; regular lubrication of pivot points is recommended. Which surface treatment is applied to the clamp? The clamp is supplied with a blackened finish, providing basic corrosion resistance and a uniform workshop appearance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 91mm Horizontal Clamp With Massive Holding Arm, 3.65kN Holding Force - Kukamet
Take advantage of the combination of robust holding power, a massive holding arm and compact weight for dependable fixture clamping. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists if technical advice is required. Horizontal clamp 113 – Kukamet horizontal toggle clamp with 3,500 N clamping force The Horizontal clamp 113 is a compact toggle clamp designed for secure workholding on jigs, fixtures and assembly stations, featuring a 90° angle base for straightforward mounting. Massive holding arm for high stability 3,500 N clamping force 90° angle base for fixture mounting Blackened finish for corrosion resistance Engineered for dependable, repeatable clamping This horizontal toggle clamp delivers high clamping reliability through a combination of robust mechanics and a massive holding arm that reduces deflection under load. The device’s 3,500 N clamping force and 3,650 N holding force ensure secure retention of workpieces during machining, welding or assembly operations. The mechanism is designed for rapid engagement and disengagement, offering consistent repeatability that supports efficient cycle times and predictable process results. Technical users benefit from a clear force rating that aids fixture design and risk assessment. Easy integration into fixtures and compact workstations The clamp integrates cleanly into purpose-built jigs because of its angle base and compact footprint. With an arm length of 91 mm and a total weight of 0.84 kg, it suits confined spaces without compromising stiffness. The toggle clamp principle converts short lever travel into high clamping force, which simplifies fixture layouts and reduces operator effort during manual loading. For production planners and workshop managers, this means reduced handling time and easier automation interfacing when consistent clamping is required. Durable finish and reliable supply chain for workshop use Finished in a blackened finish, the clamp resists wear and offers basic protection against corrosion in typical workshop environments. Built for everyday use, the construction supports long service intervals and predictable performance. Sourcing is supported by Metav’s logistics hub in Emmerich, which acts as a quality filter for the European market and ensures steady availability for industry and trade. This combination of durable design and dependable supply reduces downtime risk and supports continuous production. For dependable high-force clamping with the Kukamet 113, request supply and technical advice from Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Model: 113 SKU: B113-4-D-C1 GTIN: 8680731507508 eClass: 21041719 ETIM: EC011973 Facts Clamping force (max): 3,500 N Holding force (max): 3,650 N Arm length: 91 mm Weight: 0.84 kg Angle: 90° Special features Type: horizontal toggle clamp Mounting: angle base Material/finish: blackened finish Massive holding arm Brand: Kukamet FAQ What is the maximum clamping force of the clamp? The maximum clamping force is 3,500 N and the maximum holding force is 3,650 N for the Horizontal clamp 113 (Kukamet, SKU B113-4-D-C1). How is the clamp mounted to a fixture? Mounting is via a 90° angle base, designed for secure fixing to jigs and fixture plates to provide stable workholding. Is the arm suitable for repeated industrial use? Yes. The clamp features a massive holding arm and a durable blackened finish that support repeated cycles in workshop environments. What are the dimensions and weight for layout planning? Arm length is 91 mm and the overall weight is 0.84 kg, which helps when planning compact fixture layouts. Is this a toggle-type clamp suitable for assembly jigs? Yes. The device is a horizontal toggle clamp intended for jigs, fixtures and assembly stations and is supplied under Kukamet SKU B113-4-D-C1. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 91mm Horizontal Clamp With Solid Holding Arm, 3.65kN Holding Force, Galvanised - Kukamet
Take advantage of the massive holding arm, galvanised construction and high clamping ratings to ensure secure, repeatable fixturing. For straightforward integration into benches and jigs, order directly via Metav Werkzeuge or consult the technical team for application advice. Horizontalspanner 113 — Galvanised horizontal clamp with 3650 N holding force (Kukamet) The Horizontalspanner 113 is a galvanised horizontal clamp designed for reliable workholding in industrial fixtures and workshop jigs, fitted with an angle foot for secure mounting at 90°. Massive holding arm Galvanised corrosion resistance 3650 N maximum holding force 91 mm arm length Secure clamping for consistent process results The clamp delivers a high holding force of 3650 N with a maximum applied clamping pressure of 3500 N, providing stable fixation for repeatable machining and assembly tasks. The robust arm geometry, described as a massive holding arm, reduces elastic deflection during loading and thereby contributes to repeatable part positioning. In practical terms, the construction minimises rework and setup time by keeping components immobile under moderate production forces, which benefits both small workshops and shop-floor fixtures. Compact design that simplifies fixture layout A compact footprint and a 91 mm arm length make the device well suited to confined fixturing setups where access and clearances are limited. The integrated angle foot mounting permits a rigid 90° attachment to base plates or tooling plates, enabling fast installation into existing jigs. The galvanised finish offers basic corrosion protection, making the clamp suitable for general workshop environments where occasional exposure to humidity or coolant splash can occur. Robust materials and straightforward maintenance Constructed in galvanised steel and engineered for straightforward mechanical operation, the clamp combines durability with minimal upkeep. The mechanical principle is simple and serviceable: the lever-action design avoids complex internals, allowing visual inspection and basic preventive maintenance without specialised tools. For procurement and inventory management, the unit’s compact weight of 0.84 kg supports easy handling and reduces shipping volume within bulk orders. Select Kukamet quality for dependable fixturing—order the Horizontalspanner 113 via Metav Werkzeuge or contact the Metav team in Emmerich at +49 2822 7131930 or info@metav-werkzeuge.com for detailed application guidance Technical Data SKU: 113-4-D-C1 GTIN: 8680731500929 Manufacturer: Kukamet Facts Maximum holding force: 3650 N Maximum clamping pressure: 3500 N Arm length: 91 mm Weight: 0.84 kg Angle: 90° eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: angle foot Massive holding arm Category: spanner FAQ What maximum load can the clamp withstand? The clamp provides a maximum holding force of 3650 N and a maximum clamping pressure of 3500 N for the Horizontalspanner 113 (Kukamet, SKU 113-4-D-C1). Is the unit suitable for workshop environments with occasional moisture? Yes, the galvanised finish on the Horizontalspanner 113 gives basic corrosion resistance suitable for general workshop conditions. How is the clamp mounted to a fixture plate? The clamp is supplied with an angle foot for 90° mounting, enabling rigid attachment to base plates or tooling plates. What are the main benefits of the massive holding arm? The massive holding arm reduces elastic deformation under load, improving positional stability and repeatability during machining and assembly cycles. Can the clamp be used in compact fixture arrangements? With a 91 mm arm length and compact weight, the clamp is designed for integration into confined fixturing layouts where clearance is limited. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 93mm Horizontal Clamp With Solid Holding Arm, 850 N Closing Force, Galvanised - Kukamet
Take advantage of the combination of a zinc-plated finish, a massive holding arm and compact mounting for consistent, repeatable clamping in production. Use the reliable 1000 N holding force and 93 mm arm to improve workpiece stability, and order the horizontal clamp directly via Metav Werkzeuge or ask our consultants for application advice. Horizontal clamp 111 — Kukamet horizontal clamp, zinc-plated, 1000 N holding force A robust Horizontal clamp 111 designed for right‑angle, horizontal mounting in fixtures and jigs, combining compact dimensions with a heavy‑duty holding arm for secure, repeatable workholding. Zinc-plated corrosion resistance 1000 N maximum holding force 93 mm sturdy clamping arm Right-angle horizontal foot mount Secure clamping for reliable machining The clamp delivers a clear technical advantage where process stability matters: 1000 N maximum holding force with a 850 N press rating provides predictable retention in assembly and machining operations. By converting those force figures into secure fixturing, the device reduces vibration and part movement, which in turn lowers scrap rates and rework. The sturdy clamping arm is designed to hold components firmly in place, enabling consistent cycle times and fewer interruptions to production. Compact mount for space-efficient fixtures With a horizontal foot mounting and a fixed 90° orientation, the clamp fits into confined fixture layouts without adding bulk. The 93 mm arm offers reach while the overall mass remains low at 0.134 kg, allowing multiple units to be integrated into modular jigs without overloading the construction. This compact footprint supports denser tooling configurations and helps preserve clearance for tools and handling. Durable finish and workshop-ready design A zinc-plated surface protects the component from corrosion and workshop contaminants, making the clamp suitable for routine industrial use. The massive holding arm and robust construction ensure long service life under regular load cycles, reducing the need for frequent replacement. Clear, standardised dimensions and forces facilitate planning: the clamp is straightforward to specify into drawings and parts lists, supporting efficient sourcing and maintenance planning. For reliable fixturing based on Kukamet’s robust design, contact Metav Werkzeuge for tailored ordering and technical guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and procurement. Technical data SKU: 111-1-D-C2 GTIN: 8680731505726 Manufacturer: Kukamet Core specifications Arm length: 93 mm Maximum holding force: 1000 N Maximum press force: 850 N Angle: 90° Materials & special features Material: zinc-plated steel Mounting: horizontal foot Massive holding arm eClass: 21041719 ETIM: EC011973 FAQ What is the maximum holding force of this clamp? The clamp achieves a maximum holding force of 1000 N, providing secure retention for typical workshop and light industrial applications. What are the main mounting characteristics? Mounting is via a horizontal foot in a fixed 90° orientation, designed for use in right‑angle fixture assemblies. What is the effective arm length of the clamping arm? The clamping arm measures 93 mm, suitable for many common workpiece sizes and fixture layouts. What material finish is used and how durable is it? The clamp is made of zinc‑plated steel, offering corrosion resistance and robustness for routine shop environments. Which SKU should be referenced when ordering or specifying? Reference SKU 111-1-D-C2 and GTIN 8680731505726 for procurement and documentation Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 93mm Horizontal Clamp, Solid Holding Arm With Safety Lock, 850N Closing Force - Kukamet
Take advantage of the combination of robust holding performance, a compact 93 mm arm and an integrated safety lock to keep fixtures secure and production flowing. Order the clamp directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. Horizontal clamp 112 — vertical-foot lever clamp with 850 N clamping force (Kukamet) The 112 horizontal clamp is a compact lever clamp designed to provide secure workholding in fixtures and jigs, featuring a vertical mounting foot and a 90° arm for space-efficient positioning. Compact 93 mm holding arm 850 N clamping force rating Integrated safety locking mechanism Vertical foot for stable mounting Durable clamping with defined force for consistent results The robust construction delivers repeatable performance: a 93 mm holding arm combined with a rated clamping force of 850 N and a holding force of 1000 N ensures reliable fixation during machining and assembly. The precise force figures make process planning straightforward and reduce variability in throughput. The compact metalwork is finished in a blackened surface treatment that supports everyday workshop use while maintaining a professional appearance. Space-saving mounting that simplifies fixture design A vertical mounting foot reduces the clamp’s footprint on tooling plates and allows integration into tight fixture layouts. The 90° arm orientation offers a low-profile clamping direction ideal for assemblies with limited vertical clearance. With a mass of just 0.1 kg, the unit adds minimal inertia to moving assemblies and can be positioned in multiples without significantly increasing load on the base structure. Safe operation and quick handling for production environments The clamp is fitted with a safety lock and a solid holding arm, which prevent unintentional release during handling or vibration. The lever mechanism provides a clear mechanical advantage, enabling fast engagement and disengagement while maintaining a secure hold. This reduces cycle times at manual stations and supports consistent operator procedures in repetitive tasks. Practical suitability across workshop and light industrial applications Designed for general shop fitting and small-series production, the clamp suits jigs, assembly stations and inspection fixtures where a compact, dependable solution is required. The straightforward mechanical design minimises maintenance needs and allows straightforward replacement if layouts change. Supplied under the Kukamet line and identified as SKU B112-1-D-L-C2, the device integrates easily into modular clamping systems and tooling benches. Contact Metav Werkzeuge today for tailored advice on integrating the Kukamet horizontal clamp into fixtures, or request an application checklist from our consultants to ensure the best fit for production needs. Technical data Article number: B112-1-D-L-C2 Manufacturer: Kukamet Facts Arm length: 93 mm Angle: 90° Clamping force: 850 N Holding force: 1000 N Weight: 0.1 kg eClass: 21041719 ETIM: EC011973 Special features Finish: blackened/brunished Mounting: vertical foot Safety: integrated safety lock Design: solid holding arm Type: horizontal lever clamp FAQ What clamping and holding forces does the clamp provide? The clamp offers a rated clamping force of 850 N and a holding force of 1000 N, allowing planners to calculate fixture loads and safety margins with the Kukamet horizontal clamp. How is the clamp mounted in a fixture? Mounting is via a vertical foot, enabling compact installation on tooling plates and in confined fixture geometries while keeping the 90° arm orientation. Is the clamp suitable for automated stations? The mechanical lever and safety lock make the unit suitable for low-cycle automated or semi-automated operations where a reliable mechanical hold is required. What finish and durability can be expected? The clamp is supplied with a blackened/brunished surface finish that provides basic corrosion protection and a durable appearance for workshop use. How is the clamp identified for ordering or spare parts? The Kukamet horizontal clamp is listed under SKU B112-1-D-L-C2 for clear identification in procurement and spare-part planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com