Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° 3500 N Horizontal Clamp With Safety Lock, M10x70 Spindle - Kukamet
Take advantage of a compact, reliable clamping solution that combines a high clamping force, a secure safety lock and space-saving vertical-foot mounting for consistent cycle times and safe workholding; order directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 — horizontal lever clamp with safety lock and vertical foot (Kukamet) The Horizontal clamp 112 is a robust horizontal clamping lever designed for fixture and jig applications where repeatable, secure clamping and compact mounting are required Safety lock for secure clamping Max clamping force 3,500 N Vertical foot for space-saving mounting Black-oxide finish for surface protection Dependable clamping performance that speeds setup The clamping mechanism delivers a clearly specified maximum clamping force of 3,500 N and a holding force of 3,650 N, providing a reliable margin between applied clamp pressure and static retention. The difference between the two values represents the device’s ability to maintain position under load after the lever is engaged, which reduces rework and the need for frequent re-adjustment. The integrated M10 x 70 mm pressure spindle allows simple fine adjustment of contact pressure, enabling repeatable setups on jigs and fixtures. This results in faster changeovers and fewer production interruptions. Secure locking and compact mounting for safer workflows A mechanical safety lock prevents accidental release of the clamping arm during machining or handling, reducing the risk of part movement and operator injury. The clamp’s vertical foot mounting keeps the body close to the work surface, making it suitable where horizontal space is limited or where multiple clamps are arranged in a grid. The unit’s small mass (0.81 kg) and 90° lever orientation allow compact fixture layouts without compromising accessibility to the clamped workpiece. The safety mechanism and compact footprint together improve both shop-floor ergonomics and process security. Durable finish and low-maintenance operation for long service life The component is supplied with a black-oxide finish, giving a protective surface layer that helps resist corrosion and reduces light reflection in precision setups. Key wear points are straightforward to inspect and maintain; periodic lubrication of the spindle and lever pivot keeps the mechanism operating smoothly without complex service routines. As a product from Kukamet, the clamp is suited to everyday industrial use in assembly and machining jigs where a combination of durability, clear specification and simple adjustment is required. Choose the Kukamet Horizontal clamp 112 for secure, compact clamping — contact Metav Werkzeuge for ordering and tailored technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B112-4-L GTIN: 8680731507317 Name: Horizontal clamp 112 Manufacturer: Kukamet Facts Max clamping force: 3,500 N Max holding force: 3,650 N Spindle: M10 x 70 mm Angle: 90° Weight: 0.81 kg Special features Safety lock Vertical foot mounting Black-oxide finish Horizontal lever clamp Category: Clamping device FAQ What maximum clamping force does this clamp provide? The Horizontal clamp 112 delivers a maximum clamping force of 3,500 N and a holding force of 3,650 N to ensure secure retention during machining. How is the clamp mounted to a fixture? Mounting is by a vertical foot arrangement that keeps the clamp body close to the work surface and allows compact placement within jigs and tool fixtures. Does the clamp include a mechanism to prevent accidental release? Yes — the clamp features an integrated safety lock that secures the lever in the clamped position until deliberately released. What adjustment options are available for contact pressure? Contact pressure is adjusted via the M10 x 70 mm pressure spindle, permitting fine tuning of clamping force for repeatable setups. Is the surface treated for corrosion resistance? The clamp is supplied with a black-oxide finish, providing surface protection and reduced reflectivity for precision environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 3500N Horizontal Clamp With Safety Lock, Zinc Plated - Kukamet
Take advantage of the combination of robust clamping force, a secure safety lock, and a compact, galvanised design for dependable fixture work in production and assembly. Order the 112-4-L horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. 112-4-L horizontal clamp by Kukamet — galvanised, safety lock The 112-4-L horizontal clamp is a compact horizontal clamping solution designed for jigs, fixtures and general workshop fixturing where repeatable, locked clamping at 90° is required. Safety lock for secure clamping Galvanised finish for corrosion resistance 3,500 N maximum clamping force Vertical foot for stable mounting Consistent clamping performance for repetitive work A compact design delivers a high clamping force within a small footprint, enabling reliable repeatable operations in assembly and machining jigs. The unit’s rated maximum clamping force of 3,500 N and holding force of 3,650 N mean reduced slippage and stable workpiece retention under load. For non-specialist readers: the clamping force is the pushing force applied by the clamp to hold the workpiece, while the holding force describes the resistance to unintended release. These measurable values support planning for process stability and help assess whether the clamp meets specific fixture requirements. Secure locking and safe handling reduce downtime Equipped with a safety lock, the clamp prevents accidental opening during processing or handling, increasing operator safety and avoiding workpiece damage. The interlock feature is particularly valuable in automated or semi-automated setups where movement or vibration might otherwise lead to unintended release. The safety mechanism therefore reduces stoppages for re-clamping and supports a smoother production flow, contributing to higher overall equipment effectiveness. Durable finish and simple mounting for workshop longevity A galvanised finish protects the clamp from corrosion in humid shop environments, extending service life and reducing the need for frequent replacement. The vertical foot mounting style allows secure attachment to fixture plates and benches, while the M10x70 spindle thread provides a standardised connection for many fixture designs. At just 0.81 kg, the clamp combines portability with robustness, making it easy to reposition across different jigs without compromising stability. Clear integration into existing fixturing With a 90° operating angle and a concise design, the clamp integrates cleanly into slide-and-lock fixture concepts and modular tooling frames. The compact actuator path minimises interference with adjacent components, and the standard thread and mounting arrangement facilitate retrofitting into established setups. Where process documentation is required, the numeric specifications support engineering decisions and risk assessments. For supply, availability and expert assembly advice on the Kukamet 112-4-L horizontal clamp, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixturing tasks and rapid delivery options Technical Data SKU: 112-4-L GTIN: 8680731500639 Brand: Kukamet Category: Spanner Material: galvanised Facts Maximum clamping force: 3,500 N Maximum holding force: 3,650 N Angle: 90° Thread: M10x70 Weight: 0.81 kg Special features Safety lock included Vertical foot mounting Compact horizontal clamp design Corrosion-resistant galvanised finish FAQ What is the maximum clamping force of this clamp? The Kukamet 112-4-L horizontal clamp provides a maximum clamping force of 3,500 N, making it suitable for medium-duty fixturing and assembly tasks. Is the clamp protected against corrosion? Yes, the clamp has a galvanised finish, which offers corrosion resistance for use in workshop and light industrial environments. Can the clamp be mounted on standard fixture plates? The clamp uses a vertical foot mounting arrangement and an M10x70 spindle thread, enabling straightforward mounting on many standard fixture plates and modular frames. Does the product include a safety mechanism? The 112-4-L includes a safety lock to prevent accidental opening, improving operator safety and process reliability. What is the weight and portability of the clamp? Weighing 0.81 kg, the clamp is compact and easy to reposition between jigs while remaining robust enough for routine production use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 4 000 N Pneumatic Three-Point Clamp With Pneumatic Cylinder, Zinc-Plated - Kukamet
Take advantage of the combination of rapid pneumatic actuation, high holding capacity and corrosion-resistant construction for reliable, repeatable clamping in production fixtures — order directly via Metav Werkzeuge or consult our specialists for integration advice. Pneumatic clamp 682 — Horizontal-foot pneumatic clamp with 18,000 N holding force by Kukamet The 682 pneumatic clamp is a compact pneumatic clamping device designed for fixture and jig applications where fast, repeatable securing at a 90° angle is required. Pneumatic actuation with integrated cylinder Horizontal mounting foot for stable installation Holding force up to 18,000 N Galvanised construction for corrosion resistance Fast, repeatable clamping for efficient production The combination of an integrated pneumatic cylinder and engineered mechanics delivers consistent cycle times and repeatable positioning, reducing set-up variance on production lines. With a holding force of 18,000 N and a clamping or pressing capacity of 4,000 N, this clamp is suited to medium- and heavy-duty jigs where secure retention and rapid operation shorten takt times. The measured forces translate directly into process reliability, enabling predictable machining and assembly sequences while supporting higher throughput. Straightforward mounting and compact installation footprint Designed with a horizontal foot, the clamp installs cleanly onto fixture plates and tooling blocks, keeping the clamping axis parallel to the workplane for compact layouts. The 90° operating angle allows simple integration into right-angle stations and multi-clamp fixtures. At approximately 9.944 kg, the unit balances robustness and manageable mass for automated or manual tooling systems. Conceived for easy alignment, the device helps reduce set-up time and facilitates repeatable positioning across batch runs. Robust finish for long service life in workshop environments Constructed from galvanised steel, the clamp resists corrosion and maintains surface integrity under typical workshop conditions. The protective finish lowers the risk of rust-related seizure and extends maintenance intervals, contributing to lower lifecycle costs and fewer unscheduled stops. Components that rely on pneumatic actuation are designed for straightforward maintenance access, enabling rapid servicing of seals and connections without complex disassembly. Versatile use across fixtures, jigs and assembly stations This pneumatic clamping device suits a wide range of industrial tasks, from production fixtures and test jigs to welding and assembly stations where secure holding and rapid release are essential. The compact mechanism fits dense tooling arrangements and is compatible with standard pneumatic controls. By providing reliable retention and fast actuation, the clamp supports processes that demand consistent part orientation and minimal manual handling, improving both efficiency and workplace ergonomics. Choose the Kukamet 682 pneumatic clamp for dependable, repeatable clamping — contact Metav Werkzeuge in Emmerich for specification support and ordering at info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: 682-6 GTIN: 8680731505146 SKU: 682-6 Manufacturer: Kukamet Facts Holding force: 18,000 N Clamping force (max): 4,000 N Angle: 90° Weight: 9.944 kg Special features Material: galvanised Mounting: horizontal foot Feature: with pneumatic cylinder Category: clamp FAQ What holding and clamping forces does this device provide? The Kukamet pneumatic clamp 682 offers a holding force of 18,000 N and a maximum clamping (pressing) force of 4,000 N, suitable for robust fixture applications. How is the clamp mounted to a fixture plate? Mounting is by a horizontal foot designed for secure attachment to tooling plates and blocks; the clamp’s 90° operating angle aids compact fixture design. Is the pneumatic cylinder included and ready for connection? Yes, the unit is specified as supplied with an integrated pneumatic cylinder for direct connection to standard compressed-air controls. What environmental resistance does the clamp offer? The clamp is manufactured in a galvanised finish, providing corrosion resistance appropriate for workshop and production environments. Can the clamp be integrated into automated systems? The compact footprint and pneumatic actuation of the 682 allow straightforward integration into automated jigs and assembly stations, supporting consistent cycle times. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 4,000 N Pneumatic Clamp Horizontal Base Without Pneumatic Cylinder, Zinc Plated - Kukamet
Robust galvanised lever clamp with a compact horizontal‑foot base and a 90° lever angle combined with a holding force of 18,000 N and clamping force of 4,000 N ensures dependable fixation in jigs and fixtures. Order the Kukamet 682 directly via Metav Werkzeuge or ask our consultants for application and integration advice. 682 Pneumatic Clamp (lever clamp) by Kukamet — galvanised, horizontal‑foot, 90° angle The 682 is a galvanised pneumatic lever clamp designed for fixed‑angle holding in production jigs and fixture systems, ideal where compact, robust clamping is required. Galvanised construction for corrosion resistance Horizontal‑foot mounting for jig integration Holding force up to 18,000 N Clamping force up to 4,000 N Stable fixation for demanding fixtures The lever clamp is engineered to provide reliable holding in demanding production environments. Its galvanised finish protects the mechanism against corrosion, extending service life in workshops and assembly lines. The compact horizontal‑foot base allows direct fixture mounting, reducing installation complexity while keeping the clamp stable under load. At a mass of 4.9 kg the unit balances rigidity and manageable handling for repair or repositioning, helping to maintain consistent part positioning during repetitive operations. High forces for secure machining and assembly With a clamping force of 4,000 N and a holding force of 18,000 N, this lever clamp secures large or heavy components where slip resistance is critical for process repeatability. The 90° lever orientation converts actuator input into a compact locking motion, minimising interference with surrounding tooling. These force values translate into improved repeatability and reduced rework in metalworking and assembly tasks, supporting efficient cycle times and predictable results on production lines. Designed for integration and low‑maintenance use Supplied without a pneumatic cylinder, the clamp is intended for integration into systems where the actuator is chosen separately to match control architecture. The horizontal‑foot mounting eases retrofitting into existing jigs and fixtures, while the simple lever mechanism reduces maintenance needs and downtime. The product’s straightforward design simplifies inspection and replacement of wear parts, supporting uninterrupted production and a practical service strategy for maintenance teams. Contact Metav Werkzeuge today to discuss how the Kukamet 682 lever clamp fits into existing fixtures or to request tailored integration guidance from our specialists. Technical Data Article number: 682-6-M GTIN: 8680731505092 Brand: Kukamet Material: Galvanised Mounting: Horizontal foot Special: Without pneumatic cylinder Facts Weight: 4.9 kg Clamping force max: 4,000 N Holding force max: 18,000 N Angle: 90° eCl@ss: 21021004 ETIM: EC011973 Special features Lever clamp design Horizontal‑foot mounting for jig assembly Galvanised finish SKU: 682-6-M Category: Spanner FAQ What clamping and holding forces does the Kukamet 682 provide? The Kukamet 682 pneumatic lever clamp delivers a clamping force up to 4,000 N and a holding force up to 18,000 N (SKU 682-6-M). Is a pneumatic cylinder included with the clamp? No, the 682 is supplied without a pneumatic cylinder and is designed for integration with a separate pneumatic actuator selected to match the system requirements. How is the clamp mounted in a jig or fixture? Mounting is via the horizontal foot, allowing direct attachment to jigs and fixtures; the 90° lever angle provides compact locking clearance for adjacent tooling. What is the material and weight of the unit? The clamp is finished galvanised and weighs 4.9 kg, offering a balance of corrosion resistance and structural stability for workshop use. Which applications benefit most from this clamp? The 682 is suitable for production jigs, assembly fixtures and machining set‑ups where compact, high‑force holding and straightforward integration are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp Massive Holding Arm, 850N Thrust / 1000N Hold, Zinc Plated - Kukamet
Take advantage of the combination of a massive 40 mm holding arm, galvanised construction and a compact, 90° angle-foot mount for reliable fixture clamping in small jigs and production lines. Order directly via Metav Werkzeuge or consult the specialists for application advice. Horizontalspanner 113 — Horizontal clamp with 40 mm arm and angle-foot mounting by Kukamet Horizontalspanner 113 is a 90° horizontal clamp designed for secure holding in fixtures, jigs and assembly benches where compact, reliable clamping is required Robust 40 mm holding arm Galvanised steel for corrosion resistance Holding force up to 1,000 N Angle-foot mounting at 90° Consistent, measurable holding for production and workshop use The clamp provides a precise, reproducible hold thanks to a 1,000 N holding force and a closing force of 850 N, offering clear performance figures for process planning. The 40 mm arm delivers an extended lever for stable contact with workpieces, reducing the need for repeated adjustment in series production. These measurable values support faster setup times and predictable clamping behaviour, making the device suitable for small-batch fixtures as well as repeated manual operations. Durable materials for long service life in workshops Constructed from galvanised steel, the unit resists corrosion in humid shop environments and offers low maintenance over time. The massive holding arm improves stiffness under load, which helps maintain positional accuracy during machining or assembly tasks. At a weight of approximately 0.136 kg, the component is light enough for easy handling while still robust in operation, allowing straightforward retrofitting into existing clamping assemblies without significant additional support. Compact mounting and simple integration into jigs The angle-foot mounting at 90° enables immediate installation on fixture plates and machine tables where horizontal clamping is required. The compact footprint and standardised mounting style ease integration into bespoke jigs, while the lever-clamp design suits quick manual operation in assembly and inspection stations. The clamp’s form factor supports ergonomic interaction on the shop floor and reliable repeatability when used in combination with other clamping elements. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Horizontalspanner 113 into existing workholding systems and for assistance selecting complementary components Technical Data Article number (SKU): 113-1-D-C1 GTIN: 8680731505436 Manufacturer: Kukamet Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Facts Arm: 40 mm Weight: 0.136 kg Holding force: 1,000 N Closing force: 850 N Angle: 90° Special features Material: galvanised steel Mounting: angle-foot (Winkelfuß) Massiver Haltearm (massive holding arm) Suitable as a horizontal lever clamp in fixtures FAQ What maximum holding force does the clamp provide? The Kukamet Horizontalspanner 113 delivers a holding force of up to 1,000 N, with a closing force of 850 N stated for planning and comparison. Is the clamp suitable for corrosive or humid workshop environments? Yes, the clamp’s galvanised construction offers enhanced corrosion resistance, making the Horizontalspanner 113 appropriate for standard workshop conditions. Can the clamp be mounted on existing fixture plates? The 90° angle-foot mounting is designed for easy integration on fixture plates and benches; the Horizontalspanner 113’s compact footprint simplifies retrofitting. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp With Massive Arm And Safety Locking, Zinc Coated - Kukamet
Benefit from a robust, low-maintenance workholding solution that combines a galvanised finish, a 40 mm heavy-duty arm and a secure safety latch for consistent clamping performance. With holding capability up to 1,000 N and a compact 90° mounting, this horizontal clamp delivers reliable repeatability on assembly fixtures and jigs — order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 113 — galvanised horizontal clamp with 40 mm arm and safety latch (Kukamet) A Horizontal clamp 113 designed for secure 90° workholding, featuring a heavy holding arm and an integrated safety lock for safe clamping in production and workshop fixtures. Robust galvanised finish 40 mm heavy-duty clamping arm Safety locking mechanism 90° angled foot mounting Holding force up to 1,000 N Consistent clamping force for productive workflows The horizontal clamp offers defined mechanical performance with a maximum holding force of 1,000 N and a pressing capability of 850 N, providing a measurable basis for fixture design and process planning. The galvanised surface reduces corrosion risk in mixed workshop environments, extending service life and maintaining repeatability. For system planners, the clamp’s compact footprint and 90° angle allow straightforward integration into modular jigs, while the specificationed forces support load calculations and cycle-time optimisation. Fast mounting and safe operation reduce stoppages Designed with an angled foot mounting, the clamp installs quickly on profile plates and base plates without complex adapters, enabling shorter fixture assembly times. The safety latch prevents accidental release during handling or vibration, reducing the chance of workpiece slippage and unplanned downtime. The massive holding arm provides rigidity under load; this robust construction simplifies maintenance routines and supports continuous use in light industrial and craft applications where reliability matters. Durable materials minimise lifecycle costs Constructed from galvanised steel and weighing just 0.155 kg, the clamp is lightweight yet sturdy for repeated operation. Galvanisation protects the component in humid or mildly corrosive atmospheres, lowering replacement frequency and contributing to predictable maintenance budgets. The straightforward mechanical design means inspections and part swaps can be completed quickly, supporting lean workflows and helping sourcing teams rationalise supplier lists without compromising on quality. Discuss specification alignment and fixture compatibility with Metav Werkzeuge in Emmerich — our consultants provide precise technical guidance and secure supply for Kukamet fixtures Technical data SKU: 113-1-D-L-C1 GTIN: 8680731505740 Brand: Kukamet Core figures Arm length: 40 mm Weight: 0.155 kg Holding force: 1,000 N Maximum pressing force: 850 N Angle: 90° Special features Material: galvanised steel Mounting type: angled foot Massive holding arm Safety locking mechanism Category: Spanner FAQ What load can the clamp safely hold in fixtures? The clamp provides a maximum holding force of 1,000 N; this specification for the Horizontal clamp 113 supports dimensioning of workholding arrangements and safety margins. Is the surface finish suitable for workshop environments? Yes, the galvanised finish on the Horizontal clamp 113 protects against corrosion and is suitable for typical workshop and light industrial conditions. How is the clamp mounted to a fixture? Mounting uses an angled foot interface at 90°, allowing direct attachment to profile plates and base plates without special adapters. Does the clamp include any anti-release features? A dedicated safety locking mechanism is integrated to prevent unintentional opening during vibration or handling, improving process safety. Which brand and article should be specified for procurement? Specify Kukamet Horizontal clamp, SKU 113-1-D-L-C1, to ensure correct supply and compatibility. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 850N Pressure - Kukamet
The combination of a solid holding arm, compact 40 mm swing and high holding force ensures reliable, repeatable workholding for light industrial and workshop fixtures; order directly via Metav Werkzeuge or consult our specialists for application guidance. Horizontal clamp 113 — horizontal toggle clamp with 40 mm arm and 1,000 N holding force (Kukamet) Horizontal clamp 113 is a compact horizontal toggle clamp designed for secure fixturing and repetitive assembly tasks in workshops and light industry. Solid holding arm with safety lock 1,000 N maximum holding force 40 mm swing arm for compact fixtures Angled base for 90° mounting Consistent hold for repeat processes The Horizontal clamp 113 delivers a dependable clamping solution where repeatability matters. With a 1,000 N holding force and an additional 850 N clamping pressure, the unit secures parts reliably during machining, welding or assembly. The lever-style mechanism provides fast locking and release, reducing cycle times and supporting efficient production flow. For teams less familiar with clamp terminology: holding force refers to the maximum resistance against pull-out, while clamping pressure denotes the compressive force applied to the workpiece. Space-saving design that improves bench layout A short, 40 mm swing arm and an angled base allow the clamp to be mounted close to fixtures without obstructing adjacent tooling. This compact footprint supports denser jig arrangements and simplifies fixture design in confined workspaces. The angled mounting foot sets the clamping plane at 90°, enabling straightforward integration into right-angle fixtures and reducing the need for additional adapters. The compact construction contributes to faster set-ups and a tidier workbench. Safe operation and long-term durability Constructed with a solid holding arm and equipped with a safety lock, the clamp minimises accidental opening during process steps, improving operator safety. The component surfaces are supplied with a blackened finish, which helps resist corrosion and wear in standard workshop environments. The robust build reduces the frequency of replacements, supporting sustainable procurement and steady uptime for production lines. Contact Metav Werkzeuge for purchasing details or to request tailored technical advice on the Kukamet Horizontal clamp 113 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number / SKU: B113-1-D-L-C1 Manufacturer: Kukamet Facts Arm length: 40 mm Maximum holding force: 1,000 N Maximum clamping pressure: 850 N Mounting angle: 90° Mounting type: angled base Weight: 0.155 kg Special features Solid holding arm Safety lock Blackened finish Toggle / lever clamp design FAQ What materials can be clamped with this device? The Kukamet horizontal toggle clamp 113 is suitable for a wide range of workshop materials; its solid holding arm and clamping pressure make it appropriate for common metals, plastics and assemblies where the specified forces are sufficient. How is the clamp mounted to a fixture? Mounting is performed via the angled base supplied with the clamp; the 90° orientation supports direct attachment to right-angle fixtures or plates. Does the clamp stay locked under vibration? Yes, the integrated safety lock ensures the clamp remains engaged under typical shop-floor vibration and during intermittent process movement. Is the surface treated to resist corrosion? The clamp features a blackened finish, providing enhanced resistance against wear and mild corrosion in standard workshop conditions. What are the key dimensions relevant for fixture design? Important dimensions for layout are the 40 mm arm length, the 90° mounting angle and the compact body, plus the stated holding and clamping forces for calculating fixture loads. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 40mm Horizontal Clamp With Solid Arm, 850 N Thrust / 1,000 N Hold - Kukamet
Reliable clamping performance and compact dimensions combine to secure fixtures efficiently; the 40 mm solid holding arm and up to 1,000 N holding force ensure repeatable results while the angled foot allows simple right-angle mounting. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for technical matching. Horizontal clamp 113 — Kukamet horizontal lever clamp with 40 mm arm and 90° angled foot The Horizontal clamp 113 is a right-angle lever clamp designed for firm workpiece holding in jigs and fixtures across machining and assembly tasks Massive holding arm 40 mm arm length Holding force 1,000 N Angled foot mount, 90° Consistent, measurable clamping for reliable repeatability The clamp delivers a clear distinction between clamping and holding: a clamping force of 850 N produces the active locking action while the holding force of 1,000 N secures the workpiece once engaged. This separation improves process reliability in repeated setups, reducing rework and minimising fixture adjustments. Measurable forces allow planners to calculate safety margins for delicate or heavy components, supporting predictable production flows. Durable construction that reduces downtime With a massive holding arm and a black oxide finish, the unit resists surface wear while remaining lightweight at 0.136 kg. The robust arm reduces elastic deflection during clamping, which contributes directly to positional stability in fixtures. The angled foot mounting offers a compact footprint and straightforward attachment to plates or blocks, enabling long service life with minimal maintenance in workshop conditions. Fast integration into jigs and modular fixtures The lever action of this horizontal lever clamp provides quick engagement and release, speeding up cycle times at assembly or machining stations. The 40 mm arm length and 90° orientation suit right-angle clamping tasks where a compact, repeatable solution is required. Installation into standard fixture arrangements is simplified by the angled-foot mounting style, enabling engineers to adapt the clamp for prototypes and production without complex redesigns. Contact Metav Werkzeuge for tailored fixture advice and to source the Kukamet Horizontal clamp 113 with 1,000 N holding force; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B113-1-D-C1 GTIN: 8682843522196 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 40 mm Weight: 0.136 kg Holding force: 1,000 N Clamping force: 850 N Angle: 90° Special features Mounting type: angled foot Massive holding arm Finish: black oxide Lever clamp design FAQ What maximum holding force does the clamp provide? The Kukamet horizontal clamp 113 has a holding force of 1,000 N and a clamping force of 850 N for secure retention once engaged. How is the clamp mounted in a fixture? Mounting is via an angled foot at 90°, allowing straightforward attachment to right-angle plates and modular fixture elements. How long is the clamp arm? The arm length is 40 mm, which offers a compact reach suitable for many jigs and small fixtures. Is the arm construction robust enough for frequent use? Yes, the clamp features a massive holding arm with a black oxide finish for improved wear resistance and durability under repeated cycles. Which article number should be referenced when ordering? Reference SKU B113-1-D-C1 for the Kukamet Horizontal clamp 113 when enquiring or ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 43mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 850N/1000N - Kukamet
Take advantage of high holding capacity and compact mounting to keep fixtures stable and cycle times predictable; the combination of a massive holding arm, an integrated safety lock and a small footprint supports reliable clamping in production jigs — order via Metav Werkzeuge or contact the consultants for specification advice. 112 horizontal clamp by Kukamet — 850 N clamping force, 90° lever The 112 horizontal clamp is a compact lever clamp designed for secure fixturing at a 90° angle, suitable for fixtures, jigs and small assembly stations where space and repeatable fixation matter 850 N clamping force for reliable fixation 1,000 N holding capacity for secure retention Massive holding arm with safety lock Blackened finish for corrosion resistance Stable clamping that keeps processes running The clamp delivers a clear performance advantage through its 850 N clamping force and 1,000 N holding capacity, which together reduce part movement during machining or assembly. The difference between clamping force and holding capacity is practical: clamping force is the operative pressure applied to the workpiece, while holding capacity indicates the maximum static retention the device can withstand. By combining these figures with a robust lever mechanism, the component ensures repeatable positioning and fewer reworks, supporting improved throughput and lower scrap rates. The compact format contributes to efficient use of bench and fixture space without sacrificing performance. Robust construction and enhanced operator safety Constructed with a massive holding arm and an integrated safety lock, the device is built for frequent use in industrial environments. The heavy-duty arm increases torsional stiffness at the clamping point, reducing flex under load and improving positional stability. The safety lock prevents unintentional release once clamped, which protects both the operator and the workpiece during handling or transfer. A blackened finish provides basic corrosion resistance and a low-reflective surface that is advantageous in measurement and assembly areas. Vertical-foot mounting allows stable attachment to plates or fixtures while keeping the clamp accessible and compact. Compact dimensions for versatile fixture integration With an arm reach of 43 mm and a fixed 90° lever orientation, the clamp integrates easily into bespoke jigs and standardised fixture plates. Weighing approximately 0.1 kg, the unit is light enough to permit dense placement of multiple clamps where several locating points are required. The vertical-foot mounting type is particularly suitable when base-space is limited or when clamps must be fitted to upright plates. Given its mechanical simplicity, maintenance is straightforward: periodic inspection of the locking mechanism and lubrication of the pivot are sufficient to maintain consistent performance. For tailored applications, technical documentation is available to verify fit and clearances before integration. For secure, repeatable fixturing choose the Kukamet 112 horizontal clamp and contact Metav Werkzeuge in Emmerich for ordering and technical advice — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B112-1-D-L-C1 Brand: Kukamet Material: Blackened finish Mounting: Vertical foot Numbers / Core technical data Clamping force: 850 N Holding capacity: 1,000 N Arm reach: 43 mm Angle: 90° Weight: 0.1 kg Special features Massive holding arm Safety locking mechanism Vertical-foot mounting Compact lever clamp FAQ What is the maximum clamping force of this clamp? The clamp provides a clamping force of 850 N and a holding capacity of 1,000 N for secure fixation of parts. Can the clamp be mounted on vertical plates? Yes, the vertical-foot mounting is designed for attachment to upright plates and fixture bases. Is the locking mechanism secure for repeated handling? The integrated safety lock prevents accidental release and is suitable for repetitive production use. What dimensions are relevant when planning fixture layouts? Key dimensions include a 43 mm arm reach, a fixed 90° lever orientation and a unit weight of approximately 0.1 kg. Is the finish suitable for workshop environments? The blackened finish offers basic corrosion protection and a non-reflective surface suited to assembly and measurement areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 43mm Horizontal Clamp With Massive Holding Arm, 850N Closing Force / 1000N Retaining Force, Zinc Plated - Kukamet
Take advantage of precise, repeatable clamping with a solid holding arm and zinc-plated finish for long-term durability; combine clear measurable forces with simple horizontal mounting to streamline jig setup and fixture reliability. Order the clamp through Metav Werkzeuge or consult their specialists for integration advice. Horizontal toggle clamp 111 — zinc-plated, 90° horizontal base (Kukamet) A Horizontal toggle clamp 111 designed for secure 90° clamping in jigs and fixtures, featuring a robust holding arm and compact 43 mm reach. Zinc-plated construction for corrosion protection Massive holding arm for stable clamping 43 mm arm and 90° clamping angle Up to 1,000 N holding force, 850 N clamping force Consistent, measurable clamping performance for production The clamp delivers clearly specified mechanical values that support reliable process control: a clamping force of 850 N and a holding force of 1,000 N. The distinction matters in practice — clamping force is the applied closing pressure during engagement, while holding force indicates the resistance to part movement once secured. These figures enable planners and machinists to select a component that meets repeatability requirements and reduces rework due to slippage, supporting higher first-pass yield in assembly and machining operations. Robust mounting and fast actuation reduce cycle time With a horizontal base for secure fixture attachment, a massive holding arm and a 90° action, this clamp is built for quick engagement and repeatable positioning. The 43 mm arm provides sufficient reach and leverage for common jigs while keeping the actuation compact. The toggle mechanism converts hand force into a reliable locking action, which speeds up manual and semi-automated workflows and lowers operator fatigue during frequent clamping cycles. Workshop-ready finish and lightweight installation The zinc-plated surface gives corrosion resistance suited to general workshop environments, extending service life under regular use. At 0.108 kg, the component is light enough for straightforward mounting yet robust in operation, allowing secure attachment without adding unnecessary mass to delicate fixtures. The finish also simplifies cleaning and maintenance, helping to maintain consistent contact surfaces and predictable clamping behaviour over time. Practical compatibility and trusted sourcing for industrial use Designed for integration into standard fixtures, the clamp’s compact footprint and 90° orientation make it compatible with common jig layouts and modular tooling systems. Supplied under the Kukamet product line and distributed via Metav Werkzeuge, it benefits from Metav’s role as a quality filter for the European market — combining broad availability with documented reliability. The supplier’s experience and extensive range support efficient procurement and reduced vendor complexity for production departments and workshops. For tailored advice on integrating the Kukamet Horizontal toggle clamp 111 into fixtures or to request technical documentation and procurement through Metav Werkzeuge, contact Metav Werkzeuge for expert guidance and reliable delivery. Technical data SKU: 111-1-D-C1 GTIN: 8680731506457 ECLASS: 21041719 ETIM: EC011973 Core data Arm length: 43 mm Angle: 90° Clamping force max: 850 N Holding force max: 1,000 N Weight: 0.108 kg Special features Zinc-plated material Horizontal base mounting Massive holding arm 90° toggle action Category: Spanner FAQ What do the two force values mean for fixture design? Clamping and holding values indicate different performance aspects; the Horizontal toggle clamp 111 specifies 850 N clamping force for engagement and 1,000 N holding force for resistance to part movement, which helps engineers size clamps for secure fixturing. Is this clamp suitable for everyday workshop use? Yes, the zinc-plated finish on the Kukamet clamp offers corrosion resistance for typical workshop conditions while the robust arm and toggle action support frequent operation. How is the clamp mounted to a jig or fixture? The clamp is designed for a horizontal base mounting; secure the base to a flat fixture plate so the 90° arm movement aligns with the workpiece datum. What clearance and reach does the arm provide? The 43 mm arm provides compact reach and good leverage for most standard jigs, balancing clearance and clamping stability. Can this clamp be used in modular tooling systems? Its compact design and standard mounting orientation make it compatible with many modular jig systems; check fixture hole patterns and clearances before installation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 43mm Horizontal Clamp With Solid Holding Arm, 1,000N Holding Force, Galvanised - Kukamet
Take advantage of the combination of galvanised construction, 1,000 N holding force and a compact vertical mounting foot to secure fixtures reliably in confined jigs; order the horizontal clamp directly via Metav Werkzeuge or consult our advisers for integration support. Horizontal clamp 112 — Kukamet horizontal clamp with galvanised finish and 1,000 N holding force Horizontal clamp 112 is a lever-style horizontal clamp for fixture and workholding applications; designed for compact installations and repeatable clamping performance Galvanised construction for corrosion resistance Holding force 1,000 N for secure clamping Clamping force 850 N for reliable fixing Vertical mounting foot for compact installation Built to last where fixtures need reliable corrosion resistance The clamp combines a galvanised finish with a massive holding arm, delivering robustness in environments where surface protection matters. The corrosion-resistant coating reduces the risk of surface degradation over time, which translates into lower maintenance and a longer service life for workshop fixtures. The substantial arm provides dimensional stability under repeated cycles, ensuring the clamping geometry remains consistent and minimises rework due to component movement. Consistent force for secure, repeatable workholding Engineered for dependable performance, the device offers a holding force of 1,000 N and a clamping force of 850 N, values that support secure retention of workpieces in light to medium-duty operations. These figures reflect the mechanical advantage of the lever mechanism and allow planners to assess suitability against fixture design requirements. The predictable force output aids process reliability and reduces variability during machining or assembly sequences, contributing directly to higher first-pass yield and fewer interruptions. Space-saving mounting and straightforward integration into jigs With a vertical mounting foot and a short 43 mm arm, the clamp occupies minimal lateral space while providing a 90° clamping orientation, ideal for tight fixture layouts. The low mass and compact footprint permit multiple units to be fitted in close proximity, enabling flexible clamping arrangements without significant added weight. The component’s modest weight supports easy handling during jigs assembly and replacement, simplifying fixture configuration changes on the shop floor. Speak to Metav Werkzeuge about the Kukamet horizontal clamp 112 with its 1,000 N holding force — our advisers in Emmerich will assist with specification and supply for immediate integration Technical data SKU: 112-1-D-C1 GTIN: 8680731500998 Brand: Kukamet Article name: Horizontal clamp 112 Facts Holding force: 1,000 N Clamping force: 850 N Arm length: 43 mm Angle: 90° Weight: 0.114 kg EClass: 21041719 ETIM: EC011973 Special features Galvanised material Massive holding arm Vertical mounting foot 90-degree configuration FAQ What materials is this clamp suitable for? The horizontal clamp 112 is supplied in a galvanised finish and is suitable for general fixture applications with a range of common workshop materials; suitability depends on the fixture design and the holding force required. How is the clamp mounted in a jig? Mounting is via the vertical mounting foot; the 90° orientation and compact base allow direct attachment to fixture plates or subplates, enabling close-packed arrangements. What retention and clamping forces can be expected? Rated values are a holding force of 1,000 N and a clamping force of 850 N, which provide reliable retention for light to medium-duty workholding tasks. Is the arm suitable for repeated cycle use? The clamp’s massive holding arm is designed for durability under repeated cycles, delivering consistent clamping geometry and reducing the need for frequent adjustments. Can multiple clamps be used together in a confined space? Yes, the compact 43 mm arm length and vertical foot allow multiple units to be positioned closely for multi-point clamping strategies. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 450 N Horizontal Clamp With 520 N Holding Force, Stainless Steel - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution with stainless steel construction and a reliable 450 N pressing capacity; the robust 90° horizontal foot makes integration into fixtures straightforward. Order the horizontal clamp directly via Metav Werkzeuge or consult the team for configuration advice. Horizontal clamp 111 — Kukamet | Stainless steel, 90° horizontal foot The Horizontal clamp 111 is a compact 90° horizontal clamping lever engineered for light industrial fixturing and workshop bench applications, offering dependable holding during assembly and testing. Stainless steel construction 450 N maximum pressing force 520 N holding force Horizontal-foot mounting, 90° orientation Strong, corrosion‑resistant clamping for reliable fixtures This compact clamping lever is manufactured from stainless steel, delivering long‑term resistance to corrosion and wear in shop environments where durability matters. The combination of a 450 N maximum pressing force and a 520 N holding force provides a predictable clamping regime that supports repeatable assembly and machining tasks. By specifying a corrosion‑resistant material together with clearly defined force values, the device enables process planners to match fixture loads to component and tooling requirements, reducing downtime caused by slippage or rework. Simple horizontal mounting that saves space and assembly time Designed with a horizontal foot and a 90° orientation, the clamp is intended for installation on flat fixture plates and machine tables where lateral access is required. The clamping spindle is supplied as M4x25, a common thread/length for compact fixtures, which simplifies integration into existing setups without special adapters. At just 0.042 kg, the unit keeps mass low, helping maintain balance on delicate jigs and reducing the load on movable subassemblies. Technical terms: the spindle designation M4x25 denotes a metric thread with a 4 mm diameter and a 25 mm thread length. Versatile application and dependable sourcing for production environments The device suits small to medium fixturing tasks across workshops and light production lines where compact, hygienic materials are required—stainless steel being particularly suitable in environments with regular cleaning or exposure to coolants. Supplied by Kukamet and distributed via Metav Werkzeuge, the clamp benefits from a quality‑filtered supply chain that supports reliable stock and consistent specifications. This supply assurance helps maintenance planners and purchasers ensure compatibility across batches and reduces the administrative burden of multiple suppliers. For corrosion‑resistant, space‑efficient fixturing choose the Kukamet Horizontal clamp 111 — contact Metav Werkzeuge in Emmerich for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S111-0 GTIN: 8680731504675 Manufacturer: Kukamet Material: Stainless steel Weight: 0.042 kg Pressing force, max: 450 N Holding force, max: 520 N Fastening type: Horizontal foot Spindle thread/length: M4x25 Angle: 90° Facts Weight: 0.042 kg Pressing force (max): 450 N Holding force (max): 520 N Angle: 90° Special features Material: Stainless steel Fastening: Horizontal foot Spindle: M4x25 Category: Spanner eCl@ss: 21041719 ETIM: EC011973 SKU: S111-0 GTIN: 8680731504675 FAQ What materials is this clamp suitable for? The clamp is made from stainless steel and is suitable for general workshop use; the Kukamet Horizontal clamp 111 is commonly used with metal components and fixtures where corrosion resistance is required. How much clamping force does the device provide? Maximum pressing force is 450 N and the maximum holding force is 520 N as specified for the Kukamet clamp, allowing planners to assess suitability for light to medium clamping tasks. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot with a 90° orientation; the clamping spindle is M4x25 for straightforward attachment to most fixture plates and compact jigs. Is the clamp suitable for hygienic or coolant‑exposed environments? Yes—constructed from stainless steel, the clamp withstands regular cleaning and moderate exposure to coolants, making the unit appropriate where corrosion resistance is required. What is the unit weight and why does it matter? The unit weight is 0.042 kg; the low mass reduces added load on movable fixtures and aids balance on precision jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 450 N Horizontal Clamp, Zinc Plated, 520 N Holding Force - Kukamet
Take advantage of the combination of galvanised durability, compact design and reliable holding force for consistent production results; order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal toggle clamp 111 – galvanised horizontal foot, 520 N holding force (Kukamet) Horizontal toggle clamp 111 is a compact horizontal clamp intended for repeatable workholding in assembly jigs and light-duty fixtures, offering corrosion-resistant construction and dependable clamping performance. Galvanised corrosion protection 520 N holding force Horizontal foot for secure mounting M4x25 pressure spindle for fine adjustment Consistent clamping for repetitive production The toggle mechanism delivers a reproducible clamping action that reduces setup variance and shortens cycle times. With a specified holding force of 520 N and a maximum clamping force of 450 N, the unit provides measurable performance that supports predictable process control. The compact construction and defined 90° operating angle allow integration into small fixtures without compromising access or visibility, while the low mass contributes to reduced inertia in automated assemblies. Simple mounting and precise adjustment for jig builders Equipped with a horizontal foot, the clamp mounts easily to flat plates and bench fixtures, creating a low-profile workholding point that keeps components accessible. The M4x25 pressure spindle permits fine adjustment of contact pressure and compensates for part tolerances, translating into fewer rejected parts and less rework. The design is optimised for quick fixture changes and repeatable positioning, which benefits production lines that require frequent part turnover or short runs. Robust finish and low-maintenance operation A galvanised surface treatment safeguards against corrosion in typical workshop environments, extending service life and reducing maintenance cycles. The clamp is supplied without an arm fitted, keeping the mechanism straightforward and reliable for general-purpose clamping tasks. The lightweight construction (approx. 0.042 kg) and lever-style actuation support ergonomic handling during installation and manual operation, while the simple geometry minimises wear points over long-term use. Contact Metav Werkzeuge for availability, specification support or a tailored quotation — Metav Werkzeuge can supply the Kukamet Horizontal toggle clamp 111 directly from Emmerich (info@metav-werkzeuge.com | +49 2822 7131930) Technical data Article number: 111-0 GTIN: 8680731500004 Manufacturer: Kukamet Facts Max clamping force: 450 N Max holding force: 520 N Weight: 0.042 kg Angle: 90° Spindle: M4x25 Special features Galvanised finish Horizontal foot mounting No arm fitted Lever-style clamp (horizontal) FAQ What is the primary use of this clamp? The Kukamet Horizontal toggle clamp 111 is intended for repeatable workholding in assembly jigs and light fixtures where a reliable horizontal clamping action is required. Can the clamp be adjusted to compensate for part tolerances? Yes, the M4x25 pressure spindle on the Horizontal toggle clamp 111 allows fine adjustment of the contact point to account for varying part thicknesses. Is the clamp suitable for outdoor or humid workshop environments? The galvanised finish on the Horizontal toggle clamp 111 provides corrosion resistance suitable for typical workshop and sheltered outdoor conditions. What mounting method does the clamp use? The clamp uses a horizontal foot for secure mounting to flat surfaces and fixture plates. How much holding force does the clamp provide? The clamp offers a maximum holding force of 520 N and a clamping force up to 450 N, giving measurable performance for light-duty applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 4500 N Pneumatic Clamp Three-Point Massive Holding Arm, Galvanised - Kukamet
Benefit from 5,000 N holding force, a 230 mm reach and a galvanised, 90° vertical mounting that secures workpieces reliably in repetitive production. Order the Kukamet pneumatic clamp 651 directly via Metav Werkzeuge or ask our consultants for tailored fixture advice. 651 Pneumatic clamp — vertical mounting, 230 mm reach A robust 651 pneumatic clamp designed for secure, repeatable clamping in jigs and assembly fixtures, ideal where space is limited and high holding forces are required Massive holding arm for high stability 230 mm reach for deep clamping tasks 90° vertical base for space-saving fixation Galvanised body for workshop resilience Consistent clamping power that keeps production running The pneumatic clamping device delivers a combination of controlled actuation and measurable retention: a maximum actuation force of 4,500 N with a steady holding force of 5,000 N ensures components remain locked during machining cycles or assembly operations. This predictability reduces rework and scrap rates, supporting higher first-pass yields. The pneumatic mechanism provides fast cycle times compared with manual levers, enabling shorter takt times while keeping clamping pressure consistent across shifts. For engineers and production managers, that translates into fewer stoppages and a more reliable process flow. Space-saving vertical mounting that simplifies fixture design With a vertical base and a fixed 90° operating angle, the clamp is intended for compact fixture layouts where lateral space is at a premium. The 230 mm reach gives the clamping arm extended access to recesses and deep-set workpieces without requiring bulky substructures. Mounting on a vertical foot simplifies integration into existing plates or pallets and keeps the clamping geometry predictable for repeat setups. This design supports modular tooling concepts and makes the component straightforward to specify in CAD assemblies and fixture bills of materials. Built for workshop durability and low intervention Constructed in a galvanised finish and fitted with a massive holding arm, the clamp resists corrosion and mechanical wear typical in shop-floor environments. The robust build reduces the frequency of replacements and supports long-term fixture integrity, lowering total cost of ownership. Routine checks are limited to pneumatic supply and visible wear points; because the device is mechanically simple, in-house maintenance teams can perform inspections quickly without specialist tools. The result is dependable uptime and reduced logistic effort for spare items. For reliable, high‑force pneumatic clamping choose the Kukamet 651 via Metav Werkzeuge — contact Metav Werkzeuge for advice and specification support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 651-5-D-C3 Brand: Kukamet Model designation: 651 Eclass: 21021004 ETIM: EC011973 Facts Arm length: 230 mm Max actuation force: 4,500 N Max holding force: 5,000 N Operating angle: 90° Special features Material: galvanised Mounting: vertical base (vertical foot) Massive holding arm Category: Spanner FAQ What clamping force can be expected from this device? The Kukamet 651 pneumatic clamp achieves a maximum actuation force of 4,500 N and a holding force up to 5,000 N, providing secure retention for repetitive operations. Is the clamp suitable for compact fixture layouts? Yes, the 90° vertical base and the 230 mm reach make the clamp well suited to space‑limited fixtures and palletised systems where a vertical mounting is required. What materials and finishes ensure workshop durability? The galvanised construction and the massive holding arm give the clamp enhanced resistance to corrosion and mechanical wear, reducing maintenance frequency. Can this clamp be integrated into existing jigs and CAD assemblies? The compact vertical mounting and standardised geometry allow straightforward integration into jigs and fixture designs; the SKU 651-5-D-C3 can be referenced in bills of materials and CAD models. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 4500 N Pneumatic Vertical-Handle Clamp, Zinc-Plated, 5000 N Holding Force - Kukamet
Compact, corrosion-resistant and designed for secure fixture work: the Kukamet 651 combines a galvanised housing, a vertical base for straightforward mounting and a vertical handle to save space, delivering 4,500 N actuation and 5,000 N holding force for reliable clamping — order the product directly via Metav Werkzeuge or ask our consultants if needed. 651 Pneumatic clamp — vertical-foot design, 90° handle (Kukamet) The 651 pneumatic clamp is a compact pneumatic clamping solution intended for fixture and production-line applications where a right‑angled hold and robust retention are required. Pneumatically actuated for fast cycles Vertical handle for compact operation Galvanised finish for corrosion resistance 4,500 N actuation, 5,000 N holding Reliable clamping where repeatability matters The pneumatic actuation of this clamping unit provides a consistent clamping force that suits repetitive production tasks. With a maximum actuation force of 4,500 N and a maximum holding force of 5,000 N, the device is built to maintain secure fixation during machining, assembly or welding processes. The controlled, pneumatic operation reduces cycle variability when compared with manual lever clamps, enabling a more predictable throughput and fewer rejects. The relatively low mass of 3.9 kg supports installation in compact jigs without adding excessive weight. Robust construction for industrial environments Constructed from galvanised components, the clamp resists corrosion in workshop conditions and offers extended service life where occasional exposure to moisture or coolants occurs. The vertical base simplifies attachment to fixture plates, while the 90° handle orientation creates a clear load path and occupies minimal lateral space on the workbench. These mechanical choices reduce the need for frequent replacement and contribute to stable clamping geometry, which is essential for precision operations and repeatable part placement. Simple integration and practical maintenance The upright actuation concept with a vertical handle enables compact layouts on fixtures and jig assemblies. The clamp is supplied as a compact unit ready for pneumatic connection and mechanical fixing to a vertical baseplate. Routine maintenance is limited to standard pneumatic practice — checking supply cleanliness and connection integrity — which keeps downtime low and service requirements straightforward. Clear, measurable values for actuation and holding force aid planning when integrating the unit into automated or semi‑automated systems. Suited applications and process benefits Engineered for use in fixture construction and series production, the clamp supports fast cycle times and secure part retention where right‑angled clamping is necessary. The combination of a galvanised finish, defined clamping forces and compact mounting makes the device appropriate for jigs in metalworking and general workshop setups where robust, repeatable fixation is required. By specifying a component with known technical figures, process engineers and workshop managers gain transparency for layout and force calculations during fixture design. For tailored advice on Kukamet pneumatic clamps and reliable supply from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 651-5-H GTIN: 8682843521670 eClass: 21021004 ETIM: EC011973 Core specifications Weight: 3.9 kg Material: galvanised Mounting: vertical base Angle: 90° Arm: Not applicable Special features Vertical handle Pneumatic actuation Max. actuation force: 4,500 N Max. holding force: 5,000 N Compact design for fixture integration FAQ What maximum clamping force does the unit provide? The Kukamet 651 pneumatic clamp delivers a maximum actuation force of 4,500 N and a maximum holding force of 5,000 N for reliable fixation in production fixtures. How is the clamp mounted in a fixture? Mounting is achieved via the vertical base supplied on the unit; the vertical base allows secure attachment to fixture plates and jigbeds. Is the clamp suitable for humid workshop environments? The galvanised finish of the 651 provides corrosion resistance appropriate for typical workshop conditions, helping to extend service life. What is the weight and how does it affect fixture design? The clamp weighs 3.9 kg; its modest mass simplifies placement within jigs and minimises additional structural demands on the fixture. Does the clamp include a manual lever or is it fully pneumatic? Operation is pneumatic with a vertically oriented handle arrangement for compact actuation; manual lever operation is not part of the standard design. Which document should be consulted for integration details? Refer to the technical datasheet and the product catalogue page provided by Kukamet for mounting dimensions and pneumatic connection recommendations for the 651 pneumatic clamp (SKU 651-5-H). Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 5,000 N Horizontal Clamp With Right-Angle Base Zinc-Plated - Kukamet
Take advantage of the combination of robust clamping performance, galvanised durability and compact design to improve fixture reliability and reduce rework. Order the Horizontal clamp 113 directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 113 — galvanised horizontal clamp with 5,000 N holding force (Kukamet) The Horizontal clamp 113 is a galvanised lever-style clamp intended for stable 90° fixtures and jig applications, offering high clamping and holding forces with an angled base for secure mounting. Holding force 5,000 N for secure clamping Clamping force 4,500 N for high-pressure fixation Galvanised steel resists corrosion and wear Angle base fixed at 90° for consistent positioning Secure production through measurable clamping performance The clamp delivers a defined holding force of 5,000 N and a clamping force of 4,500 N, values that translate directly into reliable piece stability during machining and assembly. These figures reduce part movement, lower scrap rates and shorten setup times by enabling a predictable workholding environment. The forces are particularly relevant for repeatable fixtures and batch production, where reproducible results underpin throughput and cost-efficiency. Compact, corrosion-resistant design for durable jigs Constructed from galvanised steel, the unit withstands workshop atmospheres and maintains functional surfaces over time, reducing the need for frequent replacement. The angled base (Winkelfuß) and fixed 90° orientation simplify integration into existing jigs and plates, while the moderate mass of 1.84 kg balances solidity with ease of handling. These aspects support long service life and low maintenance, offering an economical route to dependable clamping. Straightforward integration and workshop versatility As a lever-style fixture component with an angle base, the clamp suits a wide range of applications from assembly benches to bespoke tooling frames. The compact footprint and clearly specified performance figures permit straightforward planning for fixture design and risk assessment. Identifiable by SKU 113-5 and a clear GTIN, the item can be logged into inventory systems and specified on engineering drawings for traceable part management. Contact Metav Werkzeuge to discuss Kukamet’s Horizontal clamp 113 for reliable fixture upgrades and bespoke integration advice from our specialists Technical data Article number: 113-5 GTIN: 8680731501001 Brand: Kukamet Core specifications Weight: 1.84 kg Holding force: 5,000 N Clamping force: 4,500 N Angle: 90° Mounting thread for pressure spindle: M12x80 Design & features Material: galvanised steel Mounting type: angled base (Winkelfuß) Arm: not applicable Special feature: none FAQ What clamping forces does the Horizontal clamp 113 provide? The Kukamet Horizontal clamp 113 delivers a holding force of 5,000 N and a clamping force of 4,500 N, enabling stable fixation for machining and assembly operations. Is the clamp suitable for corrosive workshop environments? Yes, the clamp is made from galvanised steel, which provides enhanced resistance against corrosion and extends service life in typical workshop conditions. How is the clamp mounted within a fixture? The unit uses an angled base fixed at 90°, designed for direct mounting to plates or jigs where consistent right-angle positioning is required. Can the clamp be specified in assembly documentation? Yes, the product can be referenced by SKU 113-5 and GTIN 8680731501001 for clear identification in bills of materials and engineering drawings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 5,000 N Pneumatic Clamp Vertical Handle Massive Zinc Arm, 4,500 N Closing Force - Kukamet
Robust galvanised construction and a heavy holding arm ensure dependable, repeatable clamping with up to 5,000 N holding force and 4,500 N clamping force; the pneumatic actuation also delivers consistent cycle times for production environments. Order the Kukamet 651 directly via Metav Werkzeuge or consult our specialists for application support. 651 Pneumatic Clamp (Kukamet) – Vertical handle, galvanised heavy holding arm 651 is a pneumatic clamp for right-angle holding in jigs and fixtures, combining a vertical handle with a massive galvanised holding arm for secure positioning in assembly and machining setups Vertical handle for compact operation Heavy-duty galvanised holding arm 5,000 N maximum holding force 90° clamp angle for right-angle clamping Secure, repeatable clamping for production use The combination of pneumatic actuation and a long 230 mm arm delivers a measured balance between reach and force: with a maximum holding force of 5,000 N and a clamping output rated at 4,500 N, the device maintains consistent pressure cycle after cycle. This level of performance supports repeatability in high-volume tasks and reduces the need for readjustment during shift changes. Pneumatic control ensures strokes are uniform, which helps preserve tolerances on fixtures and mating parts. Built to withstand workshop conditions and minimise downtime Constructed from galvanised materials and fitted with a massive holding arm, the unit resists corrosion and mechanical wear in demanding environments. The vertical handle layout and solid arm design reduce flex under load, lowering the likelihood of unexpected maintenance. The robust design translates into longer service intervals and predictable tool life, supporting continuous operation on the shop floor and contributing directly to reduced unplanned downtime. Compact mounting and straightforward integration into fixtures Designed for a vertical foot mounting arrangement, the clamp occupies minimal lateral space and fits neatly into standard jig plates or dedicated fixtures. The 90° clamp orientation is particularly suited to right-angle clamping tasks in welding, assembly and machining fixtures. Integration is simplified by a clear mechanical interface; the pneumatic actuation can be incorporated into existing compressed-air circuits without complex controls, enabling a rapid set-up of automated or semi-automated stations. Practical advantages for industry and craft Engineered for metalworking and industrial assembly, the unit is suitable for production lines, toolroom jigs and fixture setups where secure, repeatable clamping is essential. The solid construction and measured force ratings make it appropriate for heavy-duty tasks while remaining manageable for smaller workshops that require industrial-grade reliability. Supplied via Metav Werkzeuge, the clamp benefits from a quality filter at the European logistics hub in Emmerich, backed by a wide product range and longstanding service expertise. Contact Metav Werkzeuge to discuss how the Kukamet 651 pneumatic clamp can increase clamping reliability on production lines and to arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 651-5-H-D-C3 Manufacturer: Kukamet Core specifications Arm length: 230 mm Max clamping force: 4,500 N Max holding force: 5,000 N Clamp angle: 90° Materials and features Material: galvanised Vertical handle and massive holding arm Mounting: vertical foot Heavy-duty construction eClass: 21021004 ETIM: EC011973 FAQ What maximum holding force does the clamp provide? The Kukamet 651 pneumatic clamp provides a maximum holding force of 5,000 N, suitable for robust fixture applications. Is the clamping force delivered by pneumatic actuation adjustable? Yes, the pneumatic actuation of the 651 allows clamping force adjustment via pressure regulation in the compressed-air supply to match process requirements. What mounting method is required for installation? The unit uses a vertical foot mounting arrangement; the 651 is designed for secure attachment to jig plates or fixture bases in a vertical orientation. Can the clamp be used in corrosive workshop environments? The galvanised finish on the 651 offers enhanced corrosion resistance compared with plain steel, improving suitability for shop-floor conditions. Which industries and applications suit this clamp? The Kukamet 651 is intended for metalworking, assembly and welding fixtures where repeatable right-angle clamping is required; it is also applicable in automated production cells when integrated with pneumatic control systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 5,000N Horizontal Toggle Clamp With Safety Lock, Blackened Finish - Kukamet
Take advantage of a high holding force and a secure safety lock combined with a compact, horizontally mounted design to keep production cycles consistent and safe; order via Metav Werkzeuge or contact our consultants for technical guidance. Horizontal toggle clamp 111 (B111-5-L) by Kukamet — horizontal base, safety lock The Horizontal toggle clamp 111 (B111-5-L) is a robust lever clamp designed for repetitive workholding at a 90° angle, suited to jigs, fixtures and assembly stations in industrial and workshop environments. Safety lock for secure holding Horizontal base for stable mounting Holding force up to 5,000 N Pressure spindle M12×80 Reliable high-force clamping for repeatable processes The lever mechanism delivers a consistent 4,500 N clamping force with a maximum 5,000 N holding force, providing dependable retention for machining and assembly operations. The integrated M12×80 pressure spindle enables fine adjustment of contact pressure, so clamping can be adapted to different workpiece geometries without changing the fixture. These measurable values translate into fewer repositionings, reduced process variation and improved throughput in batch production. Safe, durable build for everyday workshop use Constructed with a blackened finish for corrosion resistance and a compact mass of 1.52 kg, the unit combines wear resistance with easy handling during installation. The built-in safety lock prevents accidental release under load, improving operator safety and protecting fixtures during vibration-prone processes. The horizontal base design allows secure attachment to plates or machine beds, offering a stable mounting solution that minimises setup time and preserves alignment across repeated cycles. Versatile integration that speeds up assembly and jigs As a classic lever clamp, this model is straightforward to incorporate into bespoke fixtures or standard clamping racks, delivering consistent clamping action without complex controls. The 90° operating angle provides clear actuation space and predictable kinematics, which supports faster cycle times and simplifies process planning. Transparent technical values and rugged construction make this clamp a practical choice where reliable, manual workholding must be combined with repeatability and safety. Contact Metav Werkzeuge for tailored technical advice and a quotation for the Kukamet Horizontal toggle clamp 111 (B111-5-L), available from our Emmerich warehouse Technical data SKU: B111-5-L GTIN: 8680731507102 Model: 111 Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Performance data Clamping force max: 4,500 N Holding force max: 5,000 N Pressure spindle: M12×80 Angle: 90° Weight: 1.52 kg Design & features Horizontal mounting foot Safety lock Blackened finish Lever clamp type FAQ What maximum holding and clamping forces does this clamp provide? The Kukamet Horizontal toggle clamp 111 (B111-5-L) offers a maximum clamping force of 4,500 N and a holding force up to 5,000 N. How is the clamp mounted to a fixture or machine table? Mounting is via the horizontal base; the horizontal mounting foot on the 111 (B111-5-L) allows secure attachment to plates or beds used in jigs and fixtures. Is there an adjustable contact point on the clamp? Yes, the clamp uses an M12×80 pressure spindle for adjustment of the contact pressure and to accommodate varying workpiece heights. Does the clamp include any feature to prevent accidental release? The unit is fitted with a safety lock to maintain engagement under load and to reduce the risk of unintentional opening during operation. What finish and durability can be expected from this model? The clamp is supplied with a blackened finish, providing corrosion resistance and a robust surface suitable for daily workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 58mm Horizontal Clamp With Massive Holding Arm And Safety Lock, 2500N Holding Force - Kukamet
Robust 58 mm arm combined with a massive holding arm and a secure safety latch ensures consistent clamping performance up to 2.3 kN; the angled base enables fixed 90° mounting for repeatable jig setups. Order the clamp through Metav Werkzeuge or consult our advisers for application-specific recommendations. Horizontal toggle clamp 113 — Kukamet horizontal clamp with 58 mm arm and 2.3 kN clamping force The Horizontal toggle clamp 113 is a compact, 90° horizontal workholding clamp with an angled foot for stable mounting in fixtures and jigs. Massive holding arm and safety latch 58 mm arm for compact clamping reach 2.3 kN clamping force, 2.5 kN holding force Angled base for 90° horizontal mounting Reliable clamping performance for production use The toggle clamp delivers a defined clamping force of up to 2,300 N, supported by a maximum holding force of 2,500 N, offering predictable behaviour in repetitive operations. Such reproducible force levels reduce set-up variance and contribute to shorter cycle times when used in fixtures or assembly jigs. The concise arm length of 58 mm provides a compact reach that fits tight toolroom spaces while maintaining effective leverage. These measurable values allow planners to calculate clamp placement and fixture stability in advance, improving process planning and operational efficiency. Durable design that stands up to daily workshop demands Constructed with a massive holding arm and finished in a black oxide finish, the clamp resists wear and handling in busy environments. The integrated safety latch secures the lever in the closed position, preventing accidental release and enhancing operator safety in semi-automated and manual workflows. At approximately 0.42 kg, the unit combines low mass with structural robustness, enabling easy integration into portable jigs without compromising strength. Material choices and mechanical locking ensure long service life and minimal maintenance, supporting continuous production without unexpected downtime. Simple mounting and fast operation for versatile fixtures The clamp features an angled foot mounting design set at 90°, allowing direct attachment to plates and fixture boards for horizontal workholding. This geometry simplifies alignment when clamping flat or profiled parts and reduces the need for additional brackets. The toggle mechanism offers quick actuation for rapid part loading and unloading, improving throughput in batch tasks. Its compact footprint and standard mounting arrangement make the component suitable for a wide range of applications, from inspection stations to light-duty press or assembly fixtures, while maintaining consistent clamping behaviour across cycles. Contact Metav Werkzeuge for tailored fixture advice or to secure the Kukamet Horizontal toggle clamp 113 (SKU B113-3-D-L-C1) for your production line; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: B113-3-D-L-C1 SKU: B113-3-D-L-C1 ECLASS: 21041719 ETIM: EC011973 Facts Clamping force (max): 2,300 N Holding force (max): 2,500 N Arm length: 58 mm Weight: 0.42 kg Angle: 90° Special features Angled foot (Winkelfuß) mounting Massive holding arm Safety latch (Sicherheitsverriegelung) Black oxide finish (Schwarz brüniert) Model designation: 113 Category: Spanner FAQ What maximum clamping force does the clamp provide? The Kukamet Horizontal toggle clamp 113 provides a maximum clamping force of 2,300 N with a holding force rated up to 2,500 N. Is the clamp suitable for fixture mounting at 90°? Yes. The clamp is designed with an angled foot for direct 90° horizontal mounting, making it suitable for plates and fixture boards in jigs. What is the arm length and how does it affect reach? The unit has a 58 mm arm length, offering a compact reach that is ideal for confined fixture spaces while maintaining effective leverage. Does the clamp include any safety features to prevent accidental release? The clamp is equipped with a safety latch that secures the lever in the closed position to reduce the risk of unintended opening. Which finish and materials contribute to durability? The clamp is supplied with a black oxide finish, and a massive holding arm construction designed to withstand regular workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 58mm Horizontal Clamp With Massive Holding Arm, 2.5kN Hold Force, Zinc Plated - Kukamet
Benefit from a combination of high holding performance and durable construction: a 58 mm solid holding arm, zinc-plated corrosion protection and a rated holding force of 2,500 N provide reliable, repeatable clamping for production and assembly tasks. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Horizontal toggle clamp 113 — 58 mm arm, zinc-plated The Horizontal toggle clamp 113 is a 90° horizontal clamp with an angled foot mount, designed for secure workpiece fixation in workshop and assembly environments Massive 58 mm holding arm Zinc-plated corrosion protection Clamping force up to 2,500 N 90° angle foot mounting Reliable holding power for repeatable processes The clamp delivers a measurable holding capacity, with a holding force of 2,500 N and a pressing force of 2,300 N, providing the mechanical certainty required for repeatable clamping operations. These numerical values translate into stable fixation during machining, welding or assembly, reducing re-clamping and cycle interruptions. The compact, 58 mm arm ensures short lever travel and consistent contact pressure, which supports process consistency on production lines and in small-batch workshops. Built to endure workshop conditions Constructed with a zinc-plated finish and a solid holding arm, the device resists corrosion and mechanical wear typical of industrial environments. The combination of robust materials and a lightweight design (approx. 0.37 kg) keeps handling and integration straightforward while extending service life under frequent use. The corrosion-resistant coating reduces maintenance intervals and preserves appearance and function where exposure to humidity or coolant splash is present, supporting lower total cost of ownership over time. Fast integration and versatile mounting The 90° angle foot mounting simplifies installation on jigs, fixtures and machine tables, allowing the clamp to be positioned close to the workpiece for efficient space utilisation. The compact base profile and standardised fixing pattern make retrofitting into existing tooling straightforward, while the clamp’s solid construction ensures secure engagement even in repetitive production cycles. For advice on specific mounting configurations or to confirm compatibility with a particular fixture, technical guidance is available. Contact Metav Werkzeuge for technical guidance on integrating the Kukamet horizontal toggle clamp 113 into production setups — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 113-3-D-C1 GTIN: 8680731500837 Brand: Kukamet Core data Arm length: 58 mm Angle: 90° Holding force: 2,500 N Pressing force: 2,300 N Weight: 0.37 kg Material: zinc-plated Special features Mounting type: angle foot Solid holding arm Category: clamp (Spanner) eClass: 21041719 ETIM: EC011973 FAQ What holding capacity does the clamp offer? The Kukamet horizontal toggle clamp 113 provides a holding force of 2,500 N and a pressing force of 2,300 N (SKU 113-3-D-C1), suitable for many light to medium production tasks. Is the clamp suitable for humid or coolant-prone environments? The clamp’s zinc-plated finish offers corrosion resistance, making the Kukamet horizontal toggle clamp 113 appropriate where occasional moisture or coolant exposure occurs. How is the clamp mounted to a fixture? Mounting is via a 90° angle foot; the compact base allows secure attachment to jigs, fixtures and machine tables for close workpiece access. Can the clamp be used in automated fixtures? The clamp’s compact design and solid holding arm support integration into fixtures and assembly lines; consult Metav Werkzeuge for compatibility details with specific automation setups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 58mm Horizontal Clamp With Massive Holding Arm, Safety Lock, 2.5 kN Hold Force, Zinc Plated - Kukamet
Combine robust safety locking and a zinc‑plated 58 mm arm with reliable clamping performance up to 2,300 N to secure fixtures in repetitive production tasks—order the clamp directly via Metav Werkzeuge or consult our technical advisors for application support. Horizontal toggle clamp 113 — Kukamet horizontal clamp with angled foot and zinc finish The Horizontal toggle clamp 113 is a right‑angle mounting clamp designed for workshop jigs and industrial fixturing, offering a compact profile with a reinforced holding arm and a safety locking mechanism. Massive holding arm with safety lock Angled foot for secure right‑angle mounting Clamping force up to 2,300 N Zinc‑plated finish for corrosion resistance Reliable high‑force holding for repeated operations The clamp delivers a defined clamping force of up to 2,300 N and a holding force of 2,500 N, features that translate into secure, vibration‑resistant workholding in series production. The reinforced arm and toggle mechanism reduce play under load, which improves positional accuracy on jigs and fixtures. For users replacing makeshift clamps with a robust solution, the mechanical design provides predictable performance and repeatability in every cycle. Easy integration into right‑angle jigs and assemblies Engineered for right‑angle mounting via an angled foot, the device mounts cleanly to plates and fixture bases at a 90° orientation, saving setup time and aligning with standard jig geometry. The compact 58 mm arm length balances reach and clearance, making the clamp suitable where space is limited yet a firm hold is required. At just 0.42 kg, the assemble‑friendly weight simplifies handling during fixture build‑up and reduces load on moving sub‑assemblies. Corrosion protection, safety and application range A zinc‑plated surface provides corrosion resistance suitable for workshop environments, extending service life where moisture or splash is present. The massive holding arm combined with a positive safety lock prevents accidental release under vibration, supporting secure clamping in automation and manual production lines. Typical applications include fixture clamping, welding jigs, assembly benches and repetitive machining operations where a robust, right‑angle clamp improves throughput and operator confidence. Choose the Kukamet 113 horizontal clamp for dependable high‑force fixture holding—contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich Technical data Article number: 113-3-D-L-C1 GTIN: 8680731500868 ECLASS: 21041719 ETIM: EC011973 Core specifications Arm length: 58 mm Clamping force: 2,300 N Holding force: 2,500 N Angle: 90° Weight: 0.42 kg Materials and special features Material: zinc‑plated Mounting: angled foot Massive holding arm Safety locking mechanism Category: clamp FAQ What maximum clamping and holding forces does the clamp provide? The Kukamet Horizontal toggle clamp 113 offers a clamping force of up to 2,300 N and a holding force of 2,500 N for secure fixture retention. Which mounting method is required for installation? Mounting is via an angled foot at a 90° orientation, intended for secure right‑angle attachment to fixture plates and bases. Is the clamp suitable for corrosive or humid workshop environments? The zinc‑plated finish on the Horizontal toggle clamp 113 provides corrosion resistance appropriate for typical workshop conditions. What are typical use cases for this clamp? Common applications are welding jigs, assembly benches, machining fixtures and repetitive production tasks where a compact, reliable right‑angle clamp is needed. How compact is the clamp for tight fixtures? With a 58 mm arm and a lightweight 0.42 kg construction, the clamp fits into confined setups while maintaining substantial clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 60mm Horizontal Clamp With Massive Holding Arm, Safety Lock, 1,200N Holding Force - Kukamet
The robust construction with a massive holding arm and integrated safety lock ensures consistent part retention and safe operation under repeated cycles. With a compact 60 mm lever and an angled base for stable mounting, this clamp delivers up to 1,200 N holding force and 1,000 N operating force for dependable fixture performance. Order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — Kukamet horizontal toggle clamp with 60 mm arm and safety lock The Horizontal clamp 113 is a compact horizontal toggle clamp designed for secure workpiece fixation in fixtures, jigs and assembly stations where space and repeatable clamping force are essential. Massive holding arm with safety lock 60 mm lever arm for compact fixtures Holding force up to 1,200 N Angled base (90°) for secure mounting Reliable clamping force for consistent production results The 113 delivers a measurable holding force of 1,200 N and a maximum operating force of 1,000 N, providing predictable clamping performance for medium-duty applications. These values indicate the clamp’s ability to resist displacement under lateral and withdrawal loads, which is particularly relevant for repeatable assembly and light machining tasks. Specified forces allow engineers to calculate safety margins and cycle reliability when designing fixtures and jigs, reducing scrap rates and improving overall process stability. Compact mounting and durable finish for workshop environments Equipped with a 60 mm lever arm and an angled base (90°), the clamp integrates into confined fixture layouts without compromising accessibility. The blackened finish offers surface protection against corrosion while maintaining a low-reflective appearance for inspection and optical setups. The component’s low mass (approx. 0.27 kg) makes it suitable for portable fixtures and modular clamping plates, and the compact footprint supports higher density of clamping points where space is limited. Safety features and long-term operational benefits A massive holding arm combined with a dedicated safety lock reduces accidental release during handling or vibration-heavy processes, enhancing operator safety and protecting delicate workpieces. The mechanical toggle principle ensures repeatable closure with minimal adjustment, which shortens fixture setup times and contributes to faster cycle throughput. As part of a workshop’s clamping strategy, this clamp supports robust, low-maintenance operation and helps maintain consistent quality across production runs. For reliable fixture clamping and specification advice, contact Metav Werkzeuge to discuss the Kukamet 113 or request a tailored quotation by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data SKU: B113-2-D-L-C1 Manufacturer: Kukamet Arm length: 60 mm Holding force: 1,200 N Maximum operating force: 1,000 N Angle: 90° Weight: 0.27 kg ECLASS: 21041719 ETIM: EC011973 Mounting: Angled base (Winkelfuß) Finish: Blackened finish Feature: Massive holding arm Feature: Safety lock Category: Clamping elements (toggle clamp) FAQ What is the difference between holding force and operating force? Holding force refers to the maximum retention capacity under static load, while operating force is the input force required to engage the clamp; the Horizontal clamp 113 specifies 1,200 N holding force and 1,000 N operating force. Can the clamp be mounted on angled plates or at 90° positions? Yes, the 113 features an angled base (90°) designed for secure mounting on angled plates and fixture blocks. Is the safety lock suitable for vibration-prone environments? The integrated safety lock prevents accidental opening and is intended to improve retention during vibration and frequent cycle conditions with the Kukamet horizontal clamp. Which materials and applications suit this clamp best? The clamp’s robust lever and finish make it suitable for general workshop applications such as assembly, light machining and jigs requiring reliable repeatable clamping. What are the physical dimensions relevant for fixture design? Key dimensions for integration are the 60 mm lever arm, the 90° base angle and the unit weight of approx. 0.27 kg, which support compact and portable fixture designs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 60mm Horizontal Clamp With Solid Holding Arm, 1,000 N Thrust / 1,200 N Hold - Kukamet
Compact galvanised construction and a 60 mm massive holding arm deliver dependable clamping with low maintenance and long service life, while the 1,200 N maximum holding force and 1,000 N clamping force ensure secure workpiece fixation. Order the clamp directly via Metav Werkzeuge or contact our consultants for specification support. Horizontal toggle clamp 113 — galvanised horizontal clamp with 60 mm arm The Horizontal toggle clamp 113 is a horizontal toggle clamp designed for secure, repeatable workholding in production, assembly and jig applications, providing a compact solution for fixtures that require a firm 90° mounting orientation. Robust galvanised finish 60 mm massive holding arm 1,200 N maximum holding force 90° angle foot mounting Consistent, measurable clamping performance for production use The clamp delivers 1,000 N nominal clamping force and 1,200 N maximum holding capacity, values that translate into improved process stability and fewer rejects in repetitive operations. The distinction between clamping and holding force reflects the dynamic pressure applied during locking and the static resistance to displacement once the toggle is engaged; this combination supports both short-cycle clamping and longer-term fixturing. Documented force values aid planning and risk assessment in fixture design. Galvanised finish and a rigid arm for harsh workshop environments A galvanised surface finish provides enhanced corrosion protection compared with raw steel, reducing downtime for maintenance and extending service intervals. The 60 mm massive holding arm reduces bending and wear at the contact zone, increasing repeatability over many cycles. The clamp’s 90° angle foot mount allows straightforward integration into plates and jig bases, simplifying layout and ensuring a rigid connection between fixture and workbench. Fast toggle action and lightweight installation for efficient workflows The toggle mechanism offers rapid engagement and release, cutting changeover times in assembly and inspection processes; the device is optimised for quick manual operation while delivering reliable locking. The clamp’s compact construction and 0.215 kg weight make it suitable for modular fixtures and relocatable jigs, where minimising added mass is beneficial for handling and machine loading. The toggle design also reduces the need for frequent readjustment, supporting consistent cycle times. Secure supply and specification support are available from Metav Werkzeuge — for product ordering or application advice contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 113-2-D-C1 GTIN: 8680731500752 Manufacturer: Kukamet Material: galvanised steel Mounting: angle foot SKU: 113-2-D-C1 Facts Arm length: 60 mm Weight: 0.215 kg Max clamping force: 1,000 N Max holding force: 1,200 N Mounting angle: 90° Special features Massive holding arm Galvanised finish Angle foot mounting Toggle clamp design Compact, lightweight construction FAQ Is the clamp suitable for production jigs and fixtures? Yes. The Horizontal toggle clamp 113 is designed for production jigs and fixtures, providing standardised forces (1,000 N clamping, 1,200 N holding) that support repeatable workholding. What is the mounting arrangement for the clamp? The clamp uses a 90° angle foot mount for secure attachment to plates and jig bases, simplifying integration into existing fixture layouts. Which materials are used for the clamp’s construction? The clamp is made from galvanised steel, offering improved corrosion resistance for workshop environments and reduced maintenance compared with untreated steel. How does the toggle mechanism affect cycle times? The toggle action enables fast engagement and release, reducing changeover time in assembly and inspection tasks and increasing overall process throughput. Can the clamp be used in modular, lightweight fixtures? Yes. With a weight of 0.215 kg and a compact footprint, the clamp is suitable for modular fixtures where low added mass and easy repositioning are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° 62mm Pneumatic Clamp Vertical Base, 1,200 N Push / 1,400 N Hold, Galvanised Massif Arm - Kukamet
Robust, galvanised construction combined with a 62 mm reach and reliable pneumatic actuation delivers consistent clamping performance — ideal for fixture builders who demand repeatability. Order the Kukamet 651 through Metav Werkzeuge or consult our specialists for integration advice. Pneumatic clamp 651 — vertical-base, 62 mm arm, Kukamet The Pneumatic clamp 651 is a 90° pneumatic clamping unit with a vertical base and a massive holding arm, designed for repeatable fixturing and industrial assembly applications Massive holding arm for high rigidity 62 mm reach arm for compact fixturing Vertical base mounting for bench or plate fixing Galvanised finish for corrosion resistance Consistent clamping and holding for fewer rejects Pneumatic actuation provides repeatable, measurable force that reduces variability across production runs. The unit delivers a 1,200 N actuation force and a 1,400 N holding capacity, which separates the initial clamping action from the static resistance once the part is secured. This distinction means reliable immobilisation during machining or assembly, lowering rework rates and improving throughput. The predictable performance of pneumatic actuation also simplifies cycle-time planning on automated lines. Rigid, compact design that improves process accuracy A massive holding arm combined with a 62 mm arm length and a fixed 90° orientation gives a high stiffness-to-size ratio. The vertical base mounting ensures stable anchoring to benches or fixture plates, reducing deflection under load and maintaining alignment during operations. The galvanised finish protects the mechanism in workshop environments while the compact footprint supports dense fixture layouts, freeing up space without sacrificing stability. Faster cycles with safer, low-effort operation Pneumatic operation allows rapid actuation and consistent closing speed, contributing to consistent cycle times and reduced operator fatigue compared with manual levers. The clamping motion is powered by compressed air and controlled via valves, which enables simple integration with existing pneumatic systems or PLC controls. The result is a clamping unit that accelerates repetitive tasks while maintaining a high safety margin through controlled motion and fixed geometry. Practical fit for workshops and production lines The clamping unit suits assembly jigs, welding fixtures and light machining setups where fixed-angle, repeatable clamping is required. Its combination of vertical base mounting and compact reach makes it particularly useful in modular fixtures and confined spaces. For procurement, Metav combines broad availability with a quality filter based in Emmerich, offering a straightforward supply chain for standardised fixturing components and specialist advice when planning installations. Contact Metav Werkzeuge to discuss how Kukamet's 651 pneumatic clamp with 1,200 N actuation and 1,400 N holding force can be specified for current fixtures and production needs Technical data SKU: 651-2-D-C1 Model: 651 Type: Pneumatic clamp Mounting: Vertical base Arm reach: 62 mm Angle: 90° Actuation force (max): 1,200 N Holding force (max): 1,400 N Material: Galvanised Special feature: Massive holding arm eClass: 21021004 ETIM: EC011973 Performance figures Arm: 62 mm Max actuation force: 1,200 N Max holding force: 1,400 N Angle: 90° SKU: 651-2-D-C1 Features and materials Galvanised finish Massive holding arm Vertical base mounting Pneumatic actuation Lever-style clamping concept (hebelspanner) FAQ What clamping and holding forces does the unit provide? The Kukamet 651 provides a maximum actuation force of 1,200 N and a holding capacity of 1,400 N, as stated in the technical data for reliable immobilisation during operations. Can the clamp be mounted on a fixture plate or bench? Yes. The vertical base mounting is designed for secure fixing to benches or fixture plates, enabling stable installation in modular fixturing systems. Is the arm suitable for tight or compact fixture layouts? The 62 mm arm reach and compact design make the clamp appropriate for confined fixturing arrangements while maintaining stiffness and alignment. How does pneumatic actuation benefit production environments? Pneumatic actuation on the Kukamet 651 offers fast, repeatable motion and predictable cycle times, supporting automation and reducing manual effort in repetitive tasks. Does the finish protect the clamp in workshop settings? The galvanised material provides corrosion resistance suitable for standard workshop environments, helping to extend service life and maintain consistent performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com