Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° Horizontal Clamp 850 N Clamping Force, Safety Lock, Stainless Steel - Kukamet
Compact stainless‑steel construction, a positive safety lock and reliable holding performance make this horizontal lever clamp ideal for repeatable fixtures; combine 1000 N holding force, a 90° lever and compact weight for efficient set‑ups. Order the Horizontalspanner 111 directly via Metav Werkzeuge or ask our consultants for specification advice. Horizontalspanner 111 — Horizontal clamp in stainless steel with safety lock Horizontalspanner 111 is a compact horizontal lever clamp intended for secure workholding in jigs, fixtures and assembly stations where repeatable clamping and a positive lock are required Stainless steel construction Integrated safety lock Holding force 1000 N Horizontal foot mounting Consistent clamping power for repeatable results The clamp delivers 1000 N holding force with a maximum pressing or clamping force of 850 N, providing dependable retention for short cycles and batch work. Forces are given in Newtons (N); the higher holding force reduces slippage and keeps workpieces stationary during machining, assembly or inspection. For production planners this means fewer re‑runs and steadier process output, while engineers benefit from predictable, measurable clamping performance. Durable construction for rough workshop use Made from stainless steel, the unit combines corrosion resistance with a light footprint — approximately 125 g — allowing integration into compact fixtures without adding excessive mass. The material choice reduces maintenance needs and extends service life in environments exposed to coolant, humidity or occasional contamination. The compact profile supports close‑packed fixture layouts and simplifies storage and transport within the workshop. Safe, fast operation that protects processes An integrated safety lock secures the lever in the closed position, preventing accidental release under vibration or handling. The 90° lever offers a clear locked/unlocked position and enables quick motion for rapid set‑ups. As a lever clamp, it converts a short manual movement into substantial clamping force, accelerating changeover times and reducing operator fatigue compared with multiple screw adjustments. Simple installation and precise adjustment for fixtures The clamp is supplied with an M5 x 35 mm spindle, allowing fine axial adjustment and easy replacement with standard threaded parts. Horizontal foot mounting is suited to tabletop jigs and plate fixtures, enabling a stable base and straightforward bolting. The compact design and standard thread size mean the unit integrates with existing fixture plates and can be positioned to suit part geometry and tool paths without complex machining. Contact Metav Werkzeuge today to discuss specification and integration of the Kukamet Horizontalspanner 111 — our consultants will advise on fixture layout, compatibility and supply from Emmerich Technical Data SKU: S111-1-L GTIN: 8680731508888 Manufacturer: Kukamet Facts Weight: 0.125 kg Max pressing force: 850 N Max holding force: 1000 N Lever angle: 90° Special features Material: Stainless steel Mounting: horizontal foot Spindle: M5 x 35 mm Safety lock: yes FAQ What clamping and holding forces does the Horizontalspanner 111 provide? The Kukamet Horizontalspanner 111 has a maximum holding force of 1000 N and a maximum pressing/clamping force of 850 N, giving consistent retention for fixture work. How is the clamp mounted in a fixture? Mounting is by a horizontal foot; the clamp is designed to be bolted to plates or bases and positioned for direct lateral clamping. Is there a safety mechanism to prevent accidental opening? Yes, an integrated safety lock secures the lever in the closed position to reduce the risk of accidental release during vibration or handling. What adjustment options are available for fine positioning? Adjustment is via the M5 x 35 mm spindle, allowing axial tuning and simple replacement with standard threaded components. Is the clamp suitable for tight or compact fixture layouts? Its compact stainless‑steel construction and low weight (0.125 kg) make it suitable for close‑packed fixtures and applications where space and corrosion resistance matter Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 850 N Hold Force With Safety Lock, Blackened Steel - Kukamet
A compact, high-performance clamp that combines a strong holding force of up to 1,000 N with a secure safety lock, enabling reliable, repeatable workholding; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 112 (B112-1-L) by Kukamet — 90° lever clamp with safety lock and 1,000 N holding force A Horizontal clamp 112 designed for safe, repeatable clamping at a right angle, suitable for jigs and fixtures with vertical-foot mounting Compact 90° lever clamp Up to 1,000 N holding force Safety lock included Vertical-foot mounting Secure clamping that keeps jobs on schedule The Horizontal clamp 112 delivers dependable clamping for light- to medium-duty assembly and fixturing. With a rated holding force of 1,000 N and a maximum pressing force of 850 N, the device reduces workpiece movement and the risk of rework, improving throughput and process stability. The integrated safety lock maintains the clamp position under vibration, providing measurable gains in repeatability and operator confidence during cyclical production. Compact, rapid handling for shopfloor efficiency Designed with a vertical-foot mounting and a compact body weighing only 0.125 kg, the clamp is easy to integrate into existing jigs and small fixtures without adding bulk. The pressure spindle M5x35 permits fine adjustment of contact pressure while the lever action ensures fast engagement and release, shortening cycle times. The low mass and small footprint help to optimise machine accessibility and simplify fixture layout in limited spaces. Durable finish and consistent right-angle locating A blackened finish provides corrosion resistance and a discreet appearance that resists grime in busy workshops. The fixed 90° angle ensures consistent lateral positioning of components, supporting accurate assembly and machining set-ups. The lever mechanism and hardened contact surfaces are configured for frequent operation, so the clamping unit performs reliably across long production runs while preserving the quality of the clamped parts. Clear benefits for workshop integration and safety Beyond mechanical performance, the clamp offers practical advantages: straightforward mounting reduces installation time, the locking mechanism enhances operator safety during unattended cycles, and the mechanical design requires minimal maintenance. As a compact lever clamp, it is particularly suitable for small-batch production, repair benches, and prototype fixtures where secure, repeatable clamping and quick handling make a measurable difference to productivity. For secure, compact workholding choose the Kukamet Horizontal clamp 112 — order via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com or +49 2822 7131930 for application guidance and compatibility checks. Technical data SKU: B112-1-L GTIN: 8680731507164 Manufacturer: Kukamet Facts Weight: 0.125 kg Holding force max: 1,000 N Pressing force max: 850 N Angle: 90° Pressure spindle: M5x35 eClass: 21041719 ETIM: EC011973 Special features Material: blackened finish Mounting: vertical-foot mounting Safety lock: yes Product type: horizontal lever clamp FAQ How much clamping force does the device provide? The Kukamet Horizontal clamp 112 provides a holding force of up to 1,000 N and a maximum pressing force of 850 N for secure positioning. Can this clamp be mounted on a fixture plate? Yes, the clamp is supplied for vertical-foot mounting, making it suitable for attachment to fixture plates and small jigs. Is there an adjustment for contact pressure? The unit includes a pressure spindle M5x35 for fine adjustment of contact pressure, allowing precise setting for different workpiece materials. What safety features are included on the clamp? The horizontal lever clamp is fitted with a safety lock to secure the lever in the closed position and prevent unintended release during vibration or cyclic operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 91mm Arm, Massive Holding Arm With Safety Lock, Zinc-Plated - Kukamet
Reliable clamping performance and a compact footprint make the horizontal toggle clamp an efficient choice for fixture work. With a galvanised finish, a massive holding arm and a 91 mm clamping reach, it delivers repeatable results and long service life. Order the clamp directly via Metav Werkzeuge or ask the consultants if further specification support is required. Horizontal toggle clamp 113 by Kukamet — galvanised, 91 mm arm The Horizontal toggle clamp 113 is a robust horizontal clamping solution for jigs and fixtures, designed for secure workpiece retention in production and assembly processes Galvanised corrosion-resistant finish Massive holding arm with safety lock 91 mm clamping arm for tight spaces 3,650 N maximum holding force Precise, repeatable retention for production tasks The compact horizontal clamp combines a massive holding arm with a positive safety lock, providing consistent clamping and reduced movement during machining or assembly. The device is specified with a maximum holding force of 3,650 N and a pressing capability of 3,500 N, values that support secure fixation without overloading standard jigs. The robust mechanical action is optimised for repeatability, which reduces set-up time and minimizes rework in repetitive production steps. Space-efficient mounting for tight fixture layouts Thanks to its 91 mm arm length and an angle foot mounting arrangement, the clamp fits into compact fixture designs while maintaining an effective leverage ratio. The 90° operating orientation allows integration on base plates or side rails where vertical space is limited. The geometry supports close-packed layouts on modular tooling plates, enabling more workstations per fixture without sacrificing clamping force or accessibility. Corrosion protection and workshop durability Constructed with a galvanised finish, the clamp resists corrosion in workshop environments and requires minimal maintenance. At just 0.94 kg, the component is light enough for easy handling during assembly but engineered to withstand industrial use because of its solid arm design. Galvanisation extends component life in mixed-environment applications, promoting predictable service intervals and lower total cost of ownership for maintenance teams. Quick installation and reliable operation under load The clamp is supplied with an angle-foot mounting format for straightforward attachment to plates and braces; the lever mechanism engages quickly and locks securely to the preset clamping position. The simple mechanical principle means no auxiliary power is required, and the design is suited for high-cycle applications where fast clamping and unclamping contribute to throughput. The model’s specification supports integration into manual and semi-automated workflows where dependable mechanical holding is required. Contact Metav Werkzeuge for precise application advice and to secure the Kukamet horizontal toggle clamp 113 for workshop or production use Technical Data Article number: 113-4-D-L-C1 GTIN: 8680731500950 Model: 113 Name: Horizontal toggle clamp Facts Arm length: 91 mm Maximum holding force: 3,650 N Maximum pressing force: 3,500 N Angle: 90° Weight: 0.94 kg ECLASS: 21041719 ETIM: EC011973 Special features Galvanised finish Angle foot mounting Massive holding arm Safety lock Horizontal lever clamp design FAQ What clamping forces can be expected from this clamp? The Kukamet horizontal toggle clamp 113 provides a maximum holding force of 3,650 N and a pressing capacity of 3,500 N, making it suitable for secure retention in light to medium-duty fixtures. Is the clamp suitable for installation in compact fixtures? Yes, the 91 mm arm and angle-foot mounting of the 113 make it particularly well suited for tight layouts and modular tooling plates where space is restricted. How does the safety lock work and why is it important? The integral safety lock on the toggle clamp secures the lever in the closed position, preventing accidental release under vibration or impact and ensuring consistent process reliability with Kukamet clamps. What environmental protection does the clamp offer? The clamp is finished with a galvanised coating to resist corrosion in standard workshop environments, which helps extend service life and reduces maintenance frequency. Can this clamp be used in production lines with frequent cycles? The solid arm and mechanical toggle action of the 113 are engineered for high-cycle use; the design supports fast manual or semi-automated clamping operations with consistent repeatability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 93mm Massive Arm 850N Thrust, 1,000N Hold Force, Blackened Finish - Kukamet
Compact and robust, the Kukamet horizontal clamp 111 pairs a massive holding arm with a 1,000 N maximum holding force and an effective lever length of 93 mm, delivering repeatable clamping for jig and fixture work. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 111 — Kukamet horizontal toggle clamp with 1,000 N holding force The Horizontal clamp 111 is a horizontal toggle clamp designed for secure fixture clamping in jigs, assembly and light production environments. Massive holding arm for secure clamping 1,000 N maximum holding force Horizontal base for stable fixture mounting Consistent clamping for repeatable production This horizontal toggle clamp delivers reliable results through a clear performance profile: a maximum holding force of 1,000 N combined with a clamping force of 850 N ensures components remain secure during machining, assembly or testing. The robust holding arm transfers clamping energy with minimal flex, reducing variation between cycles and supporting consistent part quality. The specification distinguishes holding and clamping values to help planners size clamps correctly for the required safety margins and process loads. Space‑saving design that suits tight fixtures Compact dimensions make this clamp straightforward to place into jigs and benches where space is limited. The lever projects 93 mm, the clamp locks at 90°, and the unit weighs only 0.134 kg, allowing multiple devices to be installed without excessive mass or interference. The horizontal base is intended for stable fixture mounting and aligns the clamping force close to the workpiece, which improves access and reduces overhang. These features are particularly useful in small-batch production and manual assembly cells where footprint and operator access matter. Durable finish and simple integration for workshop use The component carries a blackened finish, offering basic surface protection and a professional appearance that blends with common workshop tooling. The massive holding arm and lever clamp design support frequent operation and reduce the need for early replacement. Mounting is via a horizontal foot, enabling quick integration into existing fixtures or bespoke jigs. For planners and technicians, the clamp provides a balance of durability and compactness that aids uptime and keeps toolroom logistics straightforward. Contact Metav Werkzeuge today for personalised advice on the Kukamet horizontal clamp 111 and to arrange prompt supply from our Emmerich quality hub — phone +49 2822 7131930, email info@metav-werkzeuge.com Technical Data SKU: B111-1-D-C2 GTIN: 8680731506921 Brand: Kukamet Category: Clamp (Spanner) ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 93 mm Maximum holding force: 1,000 N Maximum clamping force: 850 N Angle: 90° Weight: 0.134 kg Special features Mounting: horizontal foot Material/finish: blackened finish Massive holding arm Lever clamp design Model designation: 111 FAQ What is the maximum holding and clamping force of this clamp? The Kukamet horizontal clamp 111 provides a maximum holding force of 1,000 N and a clamping force of 850 N, suitable for light to medium fixture applications. How is the clamp mounted in a fixture? Mounting is by a horizontal foot; the horizontal base is designed for secure attachment to jigs, plates or assembly benches. What are the key dimensions to consider for installation? Key dimensions: lever arm 93 mm, locking angle 90°, and a unit weight of 0.134 kg for layout planning. Is the surface finish suitable for workshop environments? The clamp has a blackened finish that gives basic protection against handling wear; for corrosive conditions, additional surface treatment or maintenance is recommended. Which applications is this clamp best suited for? The unit is intended for jigs, assembly fixtures and light production where compact, repeatable clamping and easy integration are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Heavy-Duty Zinc-Plated Horizontal Foot, 1.75 kN Thrust / 2.6 kN Hold - Kukamet
Benefit from a compact, corrosion‑resistant clamp that combines a galvanised finish with a solid arm for reliable rigidity and repeatable fixture performance; order the Horizontal clamp 141 directly via Metav Werkzeuge or consult our technical advisers for application support. Horizontal lever clamp 141 by Kukamet — galvanised, solid‑arm horizontal base clamp The Horizontal lever clamp 141 is a 90° horizontal base clamp designed for secure, repeatable workholding in jigs and fixtures across general workshop and light industrial applications. Galvanised steel finish for corrosion resistance Solid arm design for high rigidity Holding force up to 2,600 N Clamping force up to 1,750 N Reliable clamping for repeatable fixture work The clamp delivers a defined clamping force of up to 1,750 N and a holding force of up to 2,600 N, values that ensure components remain stationary during machining and assembly. The forces are given in newtons (N) to allow straightforward comparison with technical requirements; clamping force denotes the applied pressure on the workpiece, while holding force indicates the static retention capability once the lever is engaged. The combination of a solid arm and a robust mechanism reduces deflection under load, which directly supports higher process reliability and consistent quality in repetitive production runs. Fast integration into horizontal fixtures and jigs Configured with a horizontal base mounting and a 90° orientation, this clamp is intended for integration into flat fixture plates and modular tooling systems. Its compact mass—approximately 0.5 kg—keeps the added weight on the fixture low while preserving rigidity, simplifying layout calculations and reducing the need for heavy supporting structures. The galvanised surface protects against corrosion in workshop environments, extending service intervals and preserving repeatability over time. Where quick setup and repeatable positioning are priorities, this type of lever clamp provides an efficient mechanical solution without complex actuation. Durability and maintenance advantages that reduce downtime Constructed from galvanised steel and featuring a massive arm, the design focuses on longevity and low upkeep. A corrosion‑resistant finish minimises surface degradation, while the sturdy arm reduces wear on contact points, lowering the frequency of replacements. For workshop managers aiming to keep fixtures operational with minimal intervention, the robust construction translates into fewer interruptions and predictable maintenance cycles. The straightforward lever operation supports rapid manual cycles and can be combined with existing clamping patterns to speed changeovers and increase machine utilisation. Contact Metav Werkzeuge for tailored advice on fixture integration and secure the Kukamet horizontal lever clamp 141 for durable, repeatable workholding in your production process. Technical data Article number: 141-4 GTIN: 8682843520161 Manufacturer: Kukamet SKU: 141-4 ECLASS: 21041719 ETIM: EC011973 Facts Weight: 0.5 kg Clamping force: 1,750 N Holding force: 2,600 N Angle: 90° Special features Material: galvanised steel Mounting: horizontal base Design: solid (massive) arm Category: clamp (spanner) FAQ What materials is this clamp suitable for? The Horizontal lever clamp 141 is manufactured in galvanised steel and is suitable for general fixture use; material compatibility depends on the workpiece and fixture design rather than the clamp itself. How are the force figures defined for this clamp? Clamping force (1,750 N) refers to the pressure applied to the workpiece during engagement; holding force (2,600 N) is the static retention capability when the lever is locked, both stated for the Horizontal lever clamp 141 by Kukamet. Is the clamp suitable for modular fixturing plates? Yes—its horizontal base mounting and 90° orientation are intended for integration into flat fixture plates and modular tooling systems. What maintenance is required to preserve performance? Periodic inspection for wear at contact points and ensuring the galvanised finish remains intact are recommended; the solid arm design reduces maintenance frequency for the Kukamet clamp. Can the clamp be used in corrosive environments? The galvanised finish offers basic corrosion resistance suitable for typical workshop conditions; for aggressive environments, consider additional protective measures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Heavy-Duty Zinc-Plated Three-Point Fast Action, 1,750 N Thrust / 2,600 N Hold - Kukamet
Take advantage of a galvanised, solid-arm design and precise 90° mounting to secure workpieces reliably. The combination of robust construction, clear force ratings and compact weight supports consistent fixture performance — order the Horizontal clamp 142 directly via Metav Werkzeuge or consult our specialists if required. Horizontal clamp 142 — Kukamet horizontal lever clamp, galvanised, 90° mounting A robust Horizontal clamp 142 for fixture and jig applications, engineered to lock workpieces with defined clamping and holding forces in welding, assembly and general workshop fixtures. Galvanised finish for corrosion resistance Solid arm construction for high rigidity 90° horizontal base for secure fixture mounting Clamping force 1,750 N – holding force 2,600 N Reliable holding where precision counts The clamp is manufactured with a galvanised surface to resist corrosion in workshop environments and features a solid arm that reduces flex under load, improving positional stability. For production jigs and assembly stations, consistent component placement is essential; the specified force figures make the performance predictable and measurable. Explaining the numbers: the 1,750 N value denotes the maximum clamping force generated by the lever mechanism, while the 2,600 N rating indicates the static holding capacity once the clamp is engaged — both values aid in selecting the right fixture solution for a given workpiece. Designed for repeatable workflows and straightforward integration The horizontal base with a fixed 90° orientation simplifies integration into bespoke fixtures and modular tooling racks. The lever-operated mechanism enables rapid engagement and release, supporting short cycle times in repetitive tasks. Lightweight yet sturdy, at 0.39 kg, the device minimises added mass on moving fixtures and is easily mounted using the horizontal-foot configuration. The clamp’s defined mechanical properties reduce setup variation, which in turn helps to cut rework and maintains consistent throughput in serial operations. Compact workshop solution with transparent specification Engineered as a practical, no-frills toggle clamp, the unit suits welding jigs, assembly benches and inspection fixtures where a secure, repeatable hold is required. Corrosion protection and a robust arm construction extend service life in demanding environments; maintenance needs are limited to regular inspection and lubrication of pivot points. Supplied under the Kukamet name, the component fits into broader tooling strategies where clear, comparable technical data supports purchasing decisions and process planning. Contact Metav Werkzeuge today to discuss the Kukamet Horizontal clamp 142 for your fixture needs or to request stock and technical information directly from our Emmerich location. Technical data Article number: 142-4 GTIN: 8682843520185 Brand: Kukamet Facts Weight: 0.39 kg Clamping force max: 1,750 N Holding force max: 2,600 N Angle: 90° ECLASS: 21041719 ETIM: EC011973 Special features Galvanised material Solid arm design Horizontal foot mounting Lever-operated toggle clamp Compact workshop clamp FAQ What materials is this clamp suitable for? The Kukamet horizontal clamp 142 is a general-purpose lever clamp designed for standard workshop materials; suitability depends on the specific workpiece and fixture design, with the force ratings provided for selection guidance. How should the clamping and holding forces be interpreted? Clamping force (1,750 N) refers to the force applied by the lever during engagement; holding force (2,600 N) refers to the maximum static resistance when the clamp is closed. Can the clamp be used in welding fixtures? Yes, the galvanised finish and solid-arm construction make the clamp appropriate for welding and assembly jigs where a reliable, repeatable hold is required. Is the clamp easy to integrate into modular fixtures? The 90° horizontal base and compact form factor allow straightforward mounting in bespoke or modular fixture systems; the lightweight design reduces added mass on moving parts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Lever Action 2.3 kN Hold 2.5 kN Zinc Plated - Kukamet
The combination of a compact, galvanised body with a 2,300 N clamping force and a secure horizontal foot mounting ensures reliable, repeatable workholding in production and jigs. Order the clamp directly via Metav Werkzeuge or request further technical clarification from the consultants in Emmerich. 111 Horizontal Toggle Clamp — galvanised finish, horizontal foot (Kukamet) A 111 Horizontal Toggle Clamp designed for secure, repeatable clamping in jigs, fixtures and assembly stations where a compact, robust lever clamp is required Horizontal foot mounting for stable attachment Galvanised finish for corrosion resistance 2,300 N clamping force and 2,500 N holding force Consistent clamping where it matters The 111 provides a defined 2,300 N clamping force with a measured holding capacity of 2,500 N, delivering predictable contact pressure for repetitive operations. The lever-action mechanism converts manual input into a stable locking position, reducing setup variance and improving process repeatability. The spindle is specified as M8x50, allowing fine adjustment of contact position; the compact body and the horizontal base simplify integration into fixtures and jigs on production lines. Space-saving design with robust fixing A low-profile layout and the horizontal foot mounting make the clamp suited to confined workspaces and multi-clamp assemblies. The galvanised surface finish offers basic corrosion protection for workshop environments where occasional exposure to humidity or coolant mist occurs. With a small mass of 0.34 kg, the clamp minimises added load on assemblies and enables placement where larger clamps would be impractical, keeping tooling setups compact without sacrificing stability. Simple mechanics for dependable operation The lever clamping principle provides an easily serviceable and clearly understandable mechanism: when the lever is engaged, the toggle locks in position and resists opening under load. This mechanical locking reduces the need for continuous monitoring in repetitive tasks and supports rapid workpiece changeover. The robust holding figures demonstrate suitability for light- to medium-duty clamping tasks in assembly, maintenance and fixture work. Integration and workshop logistics Designed for fast installation, the clamp’s horizontal foot allows straightforward bolting to benches, plates or fixture blocks. Identification data such as SKU 111-3 and GTIN 8680731500134 facilitate inventory and procurement processes. Delivered as a galvanised unit with the declared spindle specification, the clamp fits standard workshop procedures and maintenance practices, supporting efficient asset management and clear replacement planning. Contact Metav Werkzeuge today for procurement and technical advice on the Kukamet 111 horizontal toggle clamp — available from the Emmerich quality hub; phone +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 111-3 GTIN: 8680731500134 Model: 111 ECLASS: 21041719 ETIM: EC011973 Core specifications Clamping force: 2,300 N Holding force: 2,500 N Angle: 90° Weight: 0.34 kg Spindle: M8x50 Materials & features Galvanised finish Horizontal foot mounting Lever/toggle action No additional special features specified FAQ What clamping and holding forces does this clamp provide? The Kukamet 111 horizontal toggle clamp (SKU 111-3) delivers a clamping force of 2,300 N and a holding force of 2,500 N for repeatable workholding. How is the clamp mounted in fixtures? Mounting is via the horizontal foot, which enables direct bolting to plates, fixture blocks or workbenches for stable attachment. What spindle adjustment is available for set-up? Adjustment is provided by the M8x50 spindle, permitting fine positioning of the contact point to suit different workpiece profiles. Is the finish suitable for workshop environments? The galvanised finish offers corrosion resistance suitable for general workshop and assembly applications where occasional humidity or coolant exposure occurs. How compact is the clamp for multi-station systems? With a weight of 0.34 kg and a low-profile horizontal design, the clamp is well suited to multi-clamp arrays and confined fixture layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M10x70, 3.5 kN Clamping Force, Blackened Finish - Kukamet
Take advantage of a compact, high‑force clamping solution that combines reliable holding performance with simple mounting and low weight for flexible fixture use. Order the clamp directly via Metav Werkzeuge or consult the Metav team for specification support and rapid supply. Horizontal clamp 111 — horizontal foot mount, 3,500 N clamping force (Kukamet) The Horizontal clamp 111 is a compact lever clamp designed for secure workholding where a horizontal foot and a 90° clamping orientation are required, suitable for fixtures and jigs in small to medium production runs. Horizontal foot for secure mounting 3,500 N maximum clamping force 3,650 N holding force Blackened finish resists wear Reliable holding for repeatable production results The lever design delivers a measurable and consistent clamping force of 3,500 N with a holding force of 3,650 N, values that support repeatable positioning and vibration resistance in assembly or machining jigs. This performance reduces rework and inspection time by offering stable part retention during intermittent operations. Reporting of these forces provides a rational basis for selecting the correct workholding component for a given application and supports process standardisation on the shop floor. Practical installation and straightforward operation Mounting is achieved via a horizontal foot, allowing direct attachment to flat fixture plates or workbenches. The device is equipped with an M10x70 spindle, indicating an M10 thread with a 70 mm spindle length that permits easy adjustment of workpiece height and contact pressure. The 90° actuation keeps the handle clear of neighbouring operations, while the toggle action secures the clamped part without continuous manual force. These design choices translate into faster job changeovers and reduced operator effort during repetitive tasks. Robust finish and compact build for daily workshop use Finished in a blackened finish that improves corrosion resistance and conceals wear marks, the clamp combines durability with a compact design and a weight of 0.81 kg, making it simple to integrate into portable fixtures or dense fixture layouts. The lever mechanism is engineered for low maintenance; occasional lubrication of pivot points is sufficient to maintain long service life. The straightforward construction supports economical replacement and keeps downtime minimal, contributing to steady throughput and predictable machine availability. For specification advice or to secure supply of the Kukamet Horizontal clamp 111 from Metav Werkzeuge — with fast dispatch from Emmerich and technical guidance on fixture integration — contact Metav Werkzeuge by email or phone today Technical data SKU: B111-4 GTIN: 8680731503784 ECLASS: 21041719 ETIM: EC011973 Model: 111 Manufacturer: Kukamet Facts Maximum pressing force: 3,500 N Maximum holding force: 3,650 N Angle: 90° Spindle: M10x70 Weight: 0.81 kg Special features Horizontal foot mounting Blackened finish Lever clamp design No additional special features noted FAQ What clamping and holding forces does this clamp provide? The Kukamet horizontal clamp 111 provides a clamping force of 3,500 N and a holding force of 3,650 N, values suitable for reliable retention in many jigs and fixtures. How is the clamp mounted and adjusted on a fixture? Mounting is via the horizontal foot; adjustment is made with the M10x70 spindle on the Horizontal clamp 111, which allows fine setting of the contact position and pressure. Is the finish suitable for workshop use? Yes, the clamp features a blackened finish that increases resistance to wear and surface corrosion, helping to maintain appearance and function in daily use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M12x80, 4.5 kN Closing Force, Black Oxide Finish - Kukamet
A compact, right-angle clamping solution that combines 4,500 N clamping force, an adjustable M12x80 spindle and a corrosion-resistant finish for reliable fixture work. The clamp supports secure holding up to 5,000 N and is supplied ready for straightforward integration; order directly via Metav Werkzeuge or consult our specialists for application advice. 133 Horizontal clamp (Kukamet) — M12x80 spindle, 90° right-angle clamp A 133 horizontal clamp designed for secure right-angle workholding in jigs, fixtures and production tooling. 4,500 N clamping force capacity 5,000 N holding resistance Angled foot for rigid 90° mounting Blackened, burnished corrosion-resistant finish Secure, measurable clamping performance for production use The clamp delivers a clear, quantifiable performance: 4,500 N clamping force and 5,000 N holding resistance. Clamping force refers to the applied compressive force that secures a workpiece, while holding resistance denotes the clamp’s ability to resist pull-out under load. This distinction matters for fixture design because a higher holding resistance reduces the risk of displacement during machining or assembly. The robust force figures translate into stable workholding for repetitive cycles and medium-duty metalworking tasks. Simple integration and precise adjustment for fixtures Mounting is facilitated by the angled foot that fixes the clamp at a true 90° orientation, enabling repeatable right-angle positioning in assemblies and jigs. The M12x80 pressure spindle provides fine adjustment of clamping height and compensates for varying workpiece thickness, while the moderate mass of 1.191 kg keeps the unit compact for dense fixture arrays. Installed as a lever-style clamp, the device is compatible with standard bench and fixture plates, allowing straightforward retrofit into existing tooling layouts. Durable finish and low-maintenance operation for daily use The component is finished in a blackened, burnished finish, offering surface protection against corrosion and reduced light reflection in workshop environments. The lever clamping principle minimises moving parts exposed to chips and coolant, which reduces maintenance intervals and supports consistent clamping over time. Built for professionals, the unit is suitable for industrial jigs, small-series production and repair benches that demand dependable, low-maintenance workholding. Contact Metav Werkzeuge for expert advice and reliable supply of the Kukamet 133 horizontal clamp — direct dispatch from Emmerich and tailored specification support Technical data SKU: B133-5 GTIN: 8680731507591 Article: Horizontal clamp 133 eClass: 21041719 ETIM: EC011973 Facts Clamping force max: 4,500 N Holding resistance max: 5,000 N Weight: 1.191 kg Angle: 90° Pressure spindle: M12x80 Special features Angled foot mounting Blackened, burnished finish Lever clamp style No additional special features stated FAQ What clamping and holding forces does the clamp provide? The Kukamet 133 horizontal clamp offers a maximum clamping force of 4,500 N and a holding resistance of 5,000 N, giving measurable security for medium-duty fixture tasks. How is the clamp mounted and positioned at 90°? Mounting is via an angled foot that secures the unit in a 90° orientation; the design of the Kukamet 133 horizontal clamp facilitates repeatable right-angle installation in jigs and fixtures. Is the spindle adjustable for different workpiece thicknesses? Yes, the M12x80 pressure spindle on the Kukamet 133 horizontal clamp allows fine height adjustment to accommodate varying material thicknesses and to set precise clamping travel. What surface protection does the clamp have? The unit is supplied with a blackened, burnished finish, which reduces corrosion risk and surface glare while supporting a low-maintenance service life for the Kukamet 133 horizontal clamp. Which applications are most suitable for this clamp? The clamp is intended for jigs, fixtures and production tooling in workshops and light to medium industrial use where reliable right-angle clamping and repeatable positioning are required; the Kukamet 133 horizontal clamp is a practical choice for such tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M12x80, 4.5 kN Closing Force, Zinc-Plated, 1.52 kg - Kukamet
Take advantage of a compact, galvanised design combined with a high holding force of 5,000 N and a reliable pressing force of 4,500 N for consistent fixture performance. The robust vertical-foot mounting and the M12x80 spindle ensure quick integration into workshop fixtures. Order the clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Kukamet Horizontal lever clamp 112 — galvanised, 5,000 N holding force Kukamet Horizontal lever clamp 112 is a compact horizontal clamp designed for secure fixturing in confined workstations and light to medium machining tasks. Galvanised steel construction 5,000 N holding force Vertical-foot mounting M12x80 spindle included Reliable clamping in limited spaces The horizontal lever clamp delivers a predictable clamping result where footprint matters. With a holding force of 5,000 N and a maximum pressing force of 4,500 N, the device keeps components steady during assembly and machining, reducing rework. Its compact mass of 1.52 kg supports quick handling and simple fixture changes, while the low-profile design preserves workspace around the workpiece. This balance of force and size supports higher throughput without compromising stability. Built to endure everyday workshop demands Constructed from galvanised steel, the clamp resists surface corrosion and withstands the mechanical demands of regular use. The vertical-foot mounting allows firm attachment to plates and bases, producing a rigid clamping point that minimises vibration and slippage. The lever mechanism is designed for repeated cycles, providing reliable repeatability and long service life, which reduces downtime and maintenance interventions in production environments. Straightforward installation and clear specifications The clamp features an M12x80 spindle, enabling straightforward integration with common threaded fixtures and accessories. A fixed 90° operating angle provides predictable movement and easy alignment in existing jigs. Technical clarity—stated forces, weight and mounting method—simplifies selection for engineers and purchasers, ensuring compatibility with production processes and fixture designs. Specification-driven choice supports rational decisions and predictable machine shop outcomes. For secure, compact clamping solutions request the Kukamet horizontal lever clamp 112 through Metav Werkzeuge for tailored application advice and assured delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 112-5 GTIN: 8680731500646 SKU: 112-5 Facts Weight: 1.52 kg Holding force: 5,000 N Max pressing force: 4,500 N Angle: 90° Spindle: M12x80 Special features Material: galvanised steel Mounting: vertical foot Arm: not applicable Category: Spanner Brand: Kukamet eClass: 21041719 ETIM: EC011973 Catalogue PDF: 112-katalogseite.pdf FAQ What materials can this clamp be used with? The Kukamet horizontal lever clamp 112 is suitable for general workshop use where a robust mechanical clamp is required; selection should consider component geometry and fixture design rather than material limitations. How is the clamp mounted to a fixture? Mounting is via the vertical foot; the clamp is designed to be fixed to a base plate and used with the M12x80 spindle for secure attachment. What maintenance is required to preserve performance? Routine inspection for wear and ensuring the galvanised surfaces remain clean will maintain performance; lubricate moving parts where appropriate to extend service life. Is the clamp suitable for high-cycle production use? Yes. The lever mechanism and construction are intended for repeated clamping cycles in light to medium production environments; confirm compatibility with specific cycle rates during planning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M4x25 Quick-Action Metal Handle, 450 N Thrust / 520 N Hold - Kukamet
Combining a zinc-plated finish with a compact horizontal foot and measurable clamping performance, this clamp offers robust, repeatable workholding for small fixtures and assembly tasks. Benefit from a clamping force of 450 N and a holding force of 520 N for secure fixation and reduced rework. Order the horizontal clamp directly via Metav Werkzeuge or ask the consultants for application advice. Horizontal clamp 111 by Kukamet — zinc-plated with 450 N clamping force Horizontal clamp 111 is a compact horizontal toggle clamp for secure fixturing in workshop, assembly and light production environments. Zinc-plated corrosion resistance Clamping force 450 N Holding force 520 N Metal handle for durable operation Measurable force for confident clamping The clamp delivers a clamping force of 450 N and a holding force of 520 N, figures that make it straightforward to plan fixtures with predictable results. The distinction between clamping and holding force is important: the first is the active force applied during locking, the second is the residual force keeping a workpiece in place. Specified forces allow accurate selection for tasks such as short-run assembly, jigs, and manual machining operations, reducing the risk of slippage and helping to minimise scrap rates. Built to withstand everyday use A zinc-plated finish protects the component against corrosion in workshop atmospheres, while the metal handle ensures long service life under repeated operation. The horizontal foot mounting keeps the clamp low-profile on the fixture plate, saving valuable space and enabling closer part spacing on fixtures. These design elements combine to deliver dependable performance in demanding day-to-day use, supporting consistent results across batches without frequent maintenance. Simple integration and clear mechanics The clamp features an M4x25 spindle, enabling fine height adjustment of the contact point and straightforward alignment with bespoke jig geometries. Its lever clamp design gives rapid engagement and release, shortening cycle times during manual operations and aiding operator ergonomics. At just 0.042 kg, the unit is lightweight to handle during assembly yet designed to provide a secure hold once installed, simplifying retrofits to existing fixtures and reducing downtime during tool changes. For a practical and reliable workholding solution from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and to secure prompt delivery to the workshop Technical data Article number: 111-0-M GTIN: 8680731500011 ECLASS: 21041719 ETIM: EC011973 Brand: Kukamet Facts Clamping force (max): 450 N Holding force (max): 520 N Weight: 0.042 kg Angle: 90° Spindle: M4x25 Special features Zinc-plated finish Metal handle Horizontal foot mounting Lever clamp design Suitable for fixtures and assembly jigs FAQ What is the difference between clamping force and holding force? Clamping force refers to the active force applied when the clamp is engaged; holding force is the residual securing force once the clamp is locked. The Horizontal clamp 111 lists both values (450 N clamping, 520 N holding) so fixture designers can assess suitability. Which materials can be used with this clamp? The clamp itself is zinc-plated and intended to secure workpieces made from metals or plastics commonly used in assembly and light machining; selection should be based on the workpiece geometry and the specified forces of the Horizontal clamp 111. How is the clamp mounted to a fixture plate? Mounting uses the horizontal foot configuration; the clamp is designed for low-profile attachment to fixture plates to enable close part spacing and simple integration into existing jigs. Is the handle suitable for frequent operation? Yes, the metal handle provides durable operation for repeated engagement and release, making the clamp appropriate for assembly lines and manual production tasks. Can the contact point be adjusted to match different part heights? Adjustment is achieved via the M4x25 spindle, permitting fine alignment of the contact point to ensure consistent clamping across varying workpiece heights and tolerances. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp M6x40, 1,000 N Thrust / 1,200 N Holding Force, Black Oxide - Kukamet
Take advantage of robust 1,000 N clamping and 1,200 N holding force in a compact, low-mass horizontal lever clamp; the combination supports repeatable fixtures and uncomplicated integration on jigs. Order directly via Metav Werkzeuge or consult the specialist team for application advice. Horizontal Clamp 111 — Kukamet horizontal lever clamp with 1,000 N clamping force Horizontal Clamp 111 is a compact horizontal lever clamp engineered for secure workpiece holding in fixtures, jigs and small production rigs Compact blackened finish 1,000 N clamping force 1,200 N holding force Horizontal foot mounting Secure clamping for repeatable setups The Horizontal Clamp 111 delivers a measurable increase in fixture reliability thanks to its 1,000 N clamping and 1,200 N holding capacities. These figures mean fewer shifting incidents during machining or assembly, reducing rework and improving throughput. The clamp’s straightforward lever action converts operator input into consistent clamping pressure, supporting repeatable setups and steady cycle times. Emphasis on technical reproducibility makes it suited to both workshop jigs and small-scale production lines. Compact mounting that saves space and time Integration into existing fixtures is simplified by the horizontal foot mounting and the right-angled configuration; the clamp occupies minimal footprint while presenting a clear clamping direction at 90°. The pressure spindle is specified as M6x40, enabling standardised interfacing with threaded elements in bespoke fixtures. Weighing just 0.225 kg, the unit minimises added mass on moving assemblies and is therefore easy to position during installation and maintenance, supporting quicker assembly and fewer alignment steps. Robust finish and low-maintenance operation A blackened finish provides corrosion resistance and an unobtrusive appearance for workshop environments, while the simple lever design reduces the number of wear points. The clamp’s construction focuses on longevity and predictable behaviour rather than superfluous features; this straightforward approach keeps maintenance intervals longer and replacement parts minimal. For users seeking dependable clamping without complex servicing, the compact lever clamp offers a practical balance between durability and operational simplicity. Choose the Kukamet Horizontal Clamp 111 for secure, repeatable clamping — contact Metav Werkzeuge in Emmerich for tailored advice and availability at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: B111-2 GTIN: 4061905075353 Model: 111 Brand: Kukamet Category: Clamp (Spanner) Measurements & performance Clamping force (max): 1,000 N Holding force (max): 1,200 N Weight: 0.225 kg Angle: 90° Pressure spindle: M6x40 Design & features Finish: blackened finish Mounting: horizontal foot Design: horizontal lever clamp Special feature: none FAQ What are the clamping and holding forces of this clamp? The Horizontal Clamp 111 provides a clamping force of 1,000 N and a holding force of 1,200 N, suitable for repeatable jigs and fixture applications. How is the clamp mounted and aligned in a fixture? Mounting is via a horizontal foot with a fixed 90° orientation; the unit uses an M6x40 pressure spindle for standard threaded interfacing. What finish and weight can be expected? The clamp has a blackened finish for improved corrosion resistance and weighs 0.225 kg, keeping added mass on assemblies low. Is this clamp suited to small production rigs and assembly jigs? Yes, the compact lever design and defined clamping values make it appropriate for small production rigs, assembly jigs and fixture applications requiring repeatability. Which product identifiers are relevant when ordering spare parts or referencing the item? Refer to SKU B111-2, Model 111 and GTIN 4061905075353 for order and documentation purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Quick-Action Three-Point Clamp, Metal Handle, Zinc-Plated, 450 N Thrust / 520 N Hold - Kukamet
Take advantage of the combination of compact design, reliable clamping performance and corrosion protection for consistent fixture results. Order the clamp directly via Metav Werkzeuge or request technical advice from their consultants if required. Kukamet Horizontalspanner 112 — lever clamp with vertical foot and galvanised finish The Kukamet Horizontalspanner 112 is a compact lever clamp designed for securing workpieces in jigs and fixtures where a 90° mounting orientation is required. Galvanised steel body for corrosion resistance 450 N clamping force for reliable fixation 520 N holding force maintains secure grip Vertical foot with 90° angle for fixture mounting Consistent fixation through measured forces The clamp delivers defined clamping force and holding force, specified at 450 N and 520 N respectively, which translates into predictable performance in repetitive operations. Measured values enable planners to calculate fixture loads and select suitable fastenings, while the integrated M4x25 spindle provides fine pressure adjustment. The result is a secure mechanical connection that reduces slippage and supports repeatable cycle times in assembly or machining fixtures. Quick mounting and durable operation for busy workshops A vertical foot with a fixed 90° angle simplifies integration into standard plates and mating components, minimising setup time for fixture production. The galvanised finish offers basic corrosion protection for everyday workshop environments, and the metal handle withstands frequent actuation. With a lightweight construction of about 0.042 kg, the clamp can be placed without overloading light jigs while still providing solid mechanical resistance. Suited to repetitive tasks and straightforward maintenance The lever-style mechanism is optimised for frequent engagement and disengagement, ensuring rapid clamping action and consistent part location. Simple mechanical design means maintenance is limited to occasional inspection and lubrication of moving parts rather than complex servicing. This straightforward reliability supports continuous production runs and reduces unexpected downtime, making the clamp a pragmatic choice for toolrooms and small-series manufacturing. Request availability or a technical datasheet from Metav Werkzeuge for the Kukamet Horizontalspanner 112; contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt service from Emmerich Technical data Article number: 112-0-M GTIN: 8682843520116 Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Key figures Clamping force: 450 N Holding force: 520 N Weight: 0.042 kg Angle: 90° Materials & features Galvanised steel M4x25 pressure spindle Vertical foot (senkrechter Fuß) Metal handle Lever clamp design SKU: 112-0-M FAQ What mounting configuration does the clamp require? The clamp is supplied with a vertical foot and a fixed 90° orientation, allowing direct mounting into fixture plates or jigs where a perpendicular clamping action is required. What are the specified forces and what do they mean? Clamping force (450 N) refers to the applied pressure for securing a workpiece, while holding force (520 N) indicates the static retention capacity; both values are stated for the Kukamet Horizontalspanner 112 to aid in fixture planning. Which spindle size is provided for pressure adjustment? The pressure spindle is M4x25, enabling fine adjustment of contact pressure and simple replacement if necessary. How resistant is the clamp to workshop conditions? The component is galvanised for basic corrosion protection and features a metal handle suited to frequent actuations, supporting everyday workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Vertical Base M10x70 Bolt, 3.65 kN Hold, Zinc-Plated - Kukamet
Take advantage of the combination of galvanised construction and a 3,500 N clamping force for secure, repeatable fixture work and long service life. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal toggle clamp 112 — Kukamet (galvanised, 3,500 N) The Horizontal toggle clamp 112 is a horizontal clamping device designed for fixtures and jigs, delivering a 90° toggle action for fast and reliable workpiece securing. Galvanised steel for corrosion resistance 3,500 N clamping force at 90° toggle Vertical foot mounting for stable fixing Adjustable M10x70 pressure spindle Proven holding power for demanding fixtures The clamp provides a 3,500 N clamping force with a holding force of 3,650 N, offering a dependable hold during machining, assembly and welding tasks. High measured force values translate directly into process reliability: components remain immobile under load, reducing rework and downtime. The robust toggle mechanism ensures consistent performance cycle after cycle, which supports efficient production runs and predictable quality outcomes. Corrosion resistance and long service life Constructed from galvanised steel, the unit resists workshop humidity and routine exposure to oils and coolants, extending service intervals and reducing replacement rates. The corrosion protection combined with a compact mass of 0.81 kg results in a durable yet lightweight clamping element that integrates into existing tooling without adding unnecessary bulk. The material choice offers a practical route to long-term cost-efficiency through lower maintenance needs. Quick mounting and simple adjustment for jigs Designed with a vertical foot mounting, the clamp sits securely on a base plate or fixture plate and aligns neatly within tight layouts. The M10x70 pressure spindle is adjustable; this denotes an M10 threaded spindle with a 70 mm length, enabling fine setting of clamping height and contact pressure for different workpiece geometries. The 90° toggle action gives a low-profile clamped position, making the device suitable for repetitive, ergonomic operation in production and assembly environments. Contact Metav Werkzeuge today for application support and to secure the Kukamet horizontal toggle clamp 112 with proven 3,500 N clamping performance — call +49 2822 7131930 or email info@metav-werkezeuge.com Technical data Article number (SKU): 112-4 GTIN: 8680731500561 Brand: Kukamet Facts Clamping force: 3,500 N Holding force: 3,650 N Weight: 0.81 kg Angle: 90° Pressure spindle: M10x70 Materials & special features Material: Galvanised steel Mounting: Vertical foot Model: Horizontal toggle clamp 112 ECLASS: 21041719 ETIM: EC011973 FAQ What clamping and holding forces does this clamp provide? The clamp delivers a clamping force of 3,500 N and a holding force of 3,650 N, providing secure retention during machining and assembly operations. Is the finish suitable for humid or mildly corrosive workshop environments? The galvanised finish offers enhanced corrosion resistance for standard workshop conditions, making the clamp well suited to environments where occasional exposure to coolant or moisture occurs. How is the clamp mounted and adjusted? Mounting is by a vertical foot. Adjustment of the contact point is via the M10x70 pressure spindle (M10 thread, 70 mm length) for precise clamping height and contact pressure. Which applications are typical for this type of clamp? Common uses include jigs, welding fixtures, assembly stations and repeatable workholding tasks where a low-profile, reliable horizontal toggle clamp is required. What is the product reference for ordering or specification? Reference the Kukamet horizontal toggle clamp 112, SKU 112-4, when enquiring or ordering to ensure the correct model is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Vertical Base Stainless Steel 450 N Thrust, 520 N Hold - Kukamet
Take advantage of the combination of compact design, stainless steel durability and reliable clamping forces for repeatable fixture work. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 — Kukamet lever clamp in stainless steel, 90° action Horizontal clamp 112 is a compact lever clamp designed for secure 90° positioning and fixed mounting in jigs and fixtures, offering robust holding and clamping capacity for repetitive production tasks Stainless steel construction Vertical-foot mounting for fixed setup Holding force 520 N for secure clamping M4x25 pressure spindle, 90° lever angle Precision clamping that keeps processes steady The compact lever design provides a consistent clamping force that reduces variation between cycles, supporting predictable production outcomes. With a holding force of 520 N and a maximum clamping (pressing) force of 450 N, the device is suited to small assemblies and verification fixtures where reliable retention is required. The stainless construction ensures resistance to corrosion in workshop environments, while the 90° lever geometry gives a low-profile clamping action that integrates easily into tight fixture spaces. This combination of force values and mechanical simplicity contributes directly to process stability and lower reject rates. Simple integration for compact fixtures and jigs Thanks to the vertical-foot mounting, installation onto plates and tooling bases is straightforward and repeatable, making the clamp well suited for series production and manual assembly stations. At just 0.042 kg, the unit adds minimal mass to sub-assemblies and can be positioned without affecting delicate workpieces. The M4x25 pressure spindle provides a fine mechanical interface for adapting contact pressure, enabling precise setting of clamp travel without complex adjustments. For engineers specifying small-scale clamping elements, this lever clamp offers a compact footprint while preserving functionality expected from larger devices. Durable materials and low-maintenance operation Constructed from stainless steel, the clamp resists surface wear and provides a service life that supports continuous operation with minimal upkeep. The straightforward mechanical design means fewer wearing parts and easier inspection intervals compared with more complex clamping solutions. The M4x25 spindle is a commonly sized component, simplifying replacement should normal wear occur. Where longevity and predictable maintenance schedules matter, the combination of robust material choice and simple mechanical architecture reduces downtime and total cost of ownership over the lifetime of the fixture. Contact Metav Werkzeuge for application guidance and to secure the Kukamet Horizontal clamp 112; call +49 2822 7131930 or email info@metav-werkzeuge.com for detailed specifications and ordering support Technical data SKU: S112-0 GTIN: 8682843523247 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Max clamping force: 450 N Max holding force: 520 N Angle: 90° Weight: 0.042 kg Special features Material: Stainless steel Mounting: Vertical foot Pressure spindle: M4x25 Special features: none FAQ What material is the clamp made from and why does it matter? The Kukamet Horizontal clamp 112 is made from stainless steel, which offers corrosion resistance and long service life in workshop and industrial environments. What clamping and holding forces does the unit provide? The clamp provides a maximum clamping (pressing) force of 450 N and a maximum holding force of 520 N, giving a reliable retention range for small fixtures and assemblies. How is the clamp mounted to a fixture plate? Mounting is by a vertical foot arrangement; the vertical-foot mounting enables fixed, repeatable installation on plates and bases. What is the specification of the pressure spindle and is it replaceable? The pressure spindle is M4x25; standard sizing allows for straightforward replacement or adjustment as part of routine maintenance for the Kukamet clamp S112-0. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Vertical Base Zinc Plated, 450 N Thrust / 520 N Hold - Kukamet
Take advantage of the combination of compact design, reliable clamping force and corrosion-resistant finish for steady fixture performance; order directly via Metav Werkzeuge or consult our specialists for application advice. 112 Horizontal lever clamp by Kukamet — 450 N clamping force, zinc-plated The 112 is a compact horizontal lever clamp intended for secure, repeatable workholding in jigs and fixtures across light industrial and workshop environments. Zinc-plated corrosion resistance 450 N clamping force 520 N maximum holding force Vertical foot for secure mounting Reliable clamping where space is limited The compact lever design delivers a 450 N clamping action with a 520 N maximum holding capability, making it suitable for short-cycle production and fixture use where repeatability matters. The low mass of 0.042 kg keeps added inertia minimal and enables dense placement of multiple clamps on a fixture plate. The clamping spindle is an M4x25 thread, permitting fine contact pressure adjustment and straightforward replacement without special tools. These characteristics reduce set-up time and support consistent machining tolerances. Simple mounting for consistent repeat performance Equipped with a vertical foot mounting, the device is designed for straightforward installation onto flat plates or subplates, providing a stable base for lateral clamping forces at a right angle. The fixed 90° lever orientation ensures predictable actuation and makes the component easy to integrate into existing jigs. The zinc-plated surface aids secure seating and helps prevent surface corrosion in normal workshop conditions, which contributes to long-term fixture reliability and fewer maintenance interventions. Durable finish and maintenance benefits The zinc-plated surface offers practical corrosion resistance for workshop environments without intensive maintenance demands. The simple mechanical construction minimises wear points and supports long operational life under regular use. Where replacement or adjustment is needed, the standard-thread pressure spindle and accessible mounting reduce downtime. These design choices combine to keep operating costs low while providing the repeatable performance expected in production and assembly settings. Choose Kukamet’s compact 112 horizontal lever clamp for dependable, space-saving workholding and contact Metav Werkzeuge for tailored supply and application guidance from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: 112-0 GTIN: 8682843520109 SKU: 112-0 Facts Weight: 0.042 kg Angle: 90° Clamping force: 450 N Holding force: 520 N Pressure spindle: M4x25 Special features Material/coating: zinc-plated Mounting type: vertical foot Product type: horizontal lever clamp Brand: Kukamet FAQ What is the maximum clamping force and holding force? The clamp provides a clamping force of 450 N and a maximum holding force of 520 N for secure fixture holding with Kukamet’s horizontal clamp (SKU 112-0). How is the clamp mounted to a fixture? Mounting is via a vertical foot, designed to be fastened to a flat plate or subplate for stable lateral clamping action with the Kukamet 112. Can the contact pressure be adjusted? Yes, the contact pressure is adjustable via an M4x25 pressure spindle fitted to the lever clamp, allowing precise setting of workpiece contact. Is the finish suitable for workshop environments? The zinc-plated finish provides practical corrosion resistance suitable for typical workshop environments and reduces routine maintenance. Is this clamp suitable for dense fixture layouts? With a compact form and a weight of 0.042 kg, the clamp is suitable for close placement on fixture plates where space efficiency is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp Waagerechter Foot M12x80, 4.5 kN Thrust 5 kN Hold, Blackened - Kukamet
Reliable clamping, compact construction and straightforward integration ensure steady workholding for production and assembly tasks. Benefit from the combination of 4.5 kN clamping force and 5.0 kN holding force for repeatable results. Order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontalspanner 111 — horizontal toggle clamp, 4.5 kN clamping force (Kukamet) The Horizontalspanner 111 is a horizontal toggle clamp for secure workholding in jigs and fixtures across production and assembly environments. 4.5 kN clamping force 5.0 kN holding force Black blued finish Horizontal foot mounting Dependable clamping for consistent production The core advantage of this toggle clamp is its predictable clamping force and holding force, which translate directly into fewer setup errors and reduced rework. With a rated clamping force of 4.5 kN and a maximum holding force of 5.0 kN, the device secures components firmly during machining, assembly or inspection operations. The mechanical action of the toggle mechanism converts lever motion into a locked holding state, offering a reliable, vibration-resistant hold that supports repeatable cycle times and consistent quality outcomes. Space-saving design that fits jigs and fixtures A compact footprint and dedicated horizontal foot mounting make integration into bespoke fixtures straightforward. The unit weighs 1.52 kg, allowing it to be positioned on modular plates and small tooling stations without excessive load. The adjustable pressure spindle M12x80 permits fine tuning of clamping height and contact pressure, while the 90° clamping angle suits many common workpiece geometries. The black blued finish provides a basic protective surface and a low-reflective appearance that is practical in busy production environments. Easy setup and long service life Assembly and maintenance are simplified by the clamp’s robust mechanical design and accessible adjustment features. The pressure spindle and lever arrangement minimise the need for frequent retuning, supporting extended uptime in repetitive processes. Supplied as SKU B111-5, the unit is well suited to jigs, fixtures and bench-mounted applications where a horizontal toggle clamp is required. If there is uncertainty about fitment or technical details, the Metav team can provide additional product data or advise on integration and compatibility. Contact Metav Werkzeuge for tailored advice on Kukamet clamps — quote SKU B111-5 when enquiring to ensure the right configuration for the application; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B111-5 GTIN: 8680731503791 Brand: Kukamet eClass: 21041719 ETIM: EC011973 Facts Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.52 kg Angle: 90° Pressure spindle: M12 x 80 Special features Finish: black blued Mounting: horizontal foot Design: horizontal toggle clamp Special feature: none FAQ What clamping and holding forces does the clamp provide? The Horizontalspanner 111 (Kukamet) provides a clamping force of 4,500 N and a holding force of 5,000 N for secure workholding. How is the clamp fixed to a fixture or base plate? The clamp is intended for horizontal foot mounting at a 90° angle and is compatible with standard fixture plates. Can the clamping height be adjusted? Yes — the unit uses an M12x80 pressure spindle that allows adjustment of clamping height and fine control of contact pressure. Is the surface finish suitable for workshop use? The clamp features a black blued finish that offers basic surface protection and a practical appearance for production environments. What applications is this clamp best suited to? The horizontal toggle design and compact form make it suitable for jigs, fixtures and bench-mounted assembly or inspection tasks where consistent clamping is required. Which SKU should be quoted when ordering or enquiring? Quote SKU B111-5 (Horizontalspanner 111) to ensure the correct clamp specification is referenced. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 1,000 N Pull, 1,200 N Hold, Zinc Plated - Kukamet
Take advantage of the combination of robust zinc-plated finish, precise 1,000 N clamping force and compact installation for reliable fixturing in production environments; order directly via Metav Werkzeuge or consult the team for application advice. Horizontal clamp 111 — Kukamet horizontal toggle clamp with 1,000 N clamping force and zinc-plated finish The Horizontal clamp 111 is a compact horizontal toggle clamp designed for secure, repeatable holding in jigs and fixtures across workshop and light industrial applications. Compact lever clamp design Zinc-plated corrosion resistance 1,000 N clamping force Horizontal-foot mounting, 90° operating angle Consistent clamping performance for machining and assembly The clamp delivers a rated 1,000 N clamping force with a maximum holding force of 1,200 N, providing a reliable restraint for light to medium loads during machining, welding or assembly. The integrated M6x40 pressure spindle allows for fine height adjustment and consistent contact pressure, reducing variability between cycles. Specified forces refer to mechanical performance under standard conditions and are intended to support efficient cycle times and process stability in production jigs. Easy integration into fixtures, saving space and setup time With a horizontal foot mounting and a fixed operating angle of 90°, the unit integrates seamlessly into bench-mounted fixtures and modular clamping plates. The compact weight of 0.225 kg and simple fastening arrangement make retrofitting and replacement straightforward, while the lever-style actuation keeps the footprint small. These characteristics reduce fixture complexity and assist in achieving repeatable part positioning without extensive redesign of existing tooling. Durable finish and low-maintenance operation A zinc-plated finish protects the clamp against corrosion in humid workshop environments, lowering the frequency of part replacement and upkeep. The mechanical design is free of electronics and requires only periodic visual checks and light lubrication of pivot points, which supports long service intervals with minimal downtime. The lever concept provides tactile feedback during operation, helping operators identify proper locking position quickly and confidently. Application suitability and workplace benefits Designed as a general-purpose horizontal toggle clamp, the device suits small-batch production, prototype fixtures and school or training workshops where straightforward, dependable clamping is needed. The combination of adjustable pressure spindle and stable holding capacity supports consistent quality outcomes, helping to reduce rework and maintain throughput. Where simplicity and repeatability are priorities, this clamp offers a practical balance between performance and ease of use. Contact Metav Werkzeuge for project-specific recommendations on the Kukamet horizontal clamp 111 and to ensure rapid, reliable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 111-2 GTIN: 8680731500059 Brand: Kukamet eClass: 21041719 ETIM: EC011973 Core technical data Clamping force max: 1,000 N Holding force max: 1,200 N Weight: 0.225 kg Angle: 90° Pressure spindle: M6x40 Special features Zinc-plated finish Horizontal foot mounting Lever clamp design No additional special features specified FAQ What is the maximum clamping force of this clamp? The Kukamet Horizontal clamp 111 (SKU 111-2) provides a rated clamping force of 1,000 N and a maximum holding force of 1,200 N. How is the clamp mounted in a fixture? Mounting is via the horizontal foot arrangement; the unit is designed to be fixed to a bench or fixture plate in the horizontal orientation with a 90° operating angle. Can the clamping pressure be adjusted? Yes, the clamp uses an M6x40 pressure spindle for fine adjustment of contact height and pressure to suit different workpiece thicknesses. Is the surface finish suitable for workshop environments? The zinc-plated finish offers corrosion resistance appropriate for typical workshop and light industrial conditions, helping to extend service life with minimal maintenance. What types of applications are typical for this clamp? The device is suitable for jigs, fixtures and assembly work where compact, repeatable horizontal clamping is required, such as light machining, welding fixtures and general assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 118mm Arm, Massive Holding Arm & Safety Lock, 2.5kN Holding Force - Kukamet
Take advantage of a robust clamping solution that combines a massive clamping arm, reliable safety locking and a compact, horizontal-foot mount for straightforward fixture integration; order the horizontal clamp directly via Metav Werkzeuge or ask the consultants for application advice. Horizontal clamp 111 — horizontal toggle clamp with 2,500 N holding force (Kukamet) The Horizontal clamp 111 is a compact horizontal toggle clamp designed for fixtures and jigs where secure, repeatable workholding at a 90° orientation is required. Heavy-duty clamping arm with safety lock 2,500 N maximum holding force Horizontal-foot mounting for bench fixtures Blackened burnished finish Secure force specification for reliable machining The clamp delivers a 2,500 N holding force alongside a 2,300 N pressing force, values that ensure workpieces remain stationary during assembly and light machining tasks. The distinction between holding and pressing force is important: holding force describes the maximum retention capacity once the clamp is engaged, while pressing force indicates the direct clamp pressure applied during engagement. These figures support predictable performance in production jigs, where consistent clamp force reduces rework and improves cycle reliability, making the solution particularly suitable for repetitive tasks in small series and workshop setups. Robust construction that prioritises safety and repeatability Built around a massive clamping arm and equipped with a safety lock, the unit prevents unintended release during operation and supports safe, repeatable clamping cycles. The 90° arm geometry provides compact clearance for fixtures and allows simple orientation within existing jigs. The blackened burnished finish gives a uniform surface appearance and resists everyday wear, contributing to long-term dimensional stability of the clamp and consistent contact with the workpiece. Fast integration into fixtures and compact handling The horizontal-foot mounting simplifies assembly into benches, fixtures and welding jigs, enabling secure bolting without additional adapters. With an 118 mm arm and a lightweight construction of 0.3 kg, the clamp is easy to position during setup and causes minimal load on delicate fixtures while still providing substantial retention. This makes the component a practical choice for toolrooms and production lines that require flexible, low-profile clamping without complex installation. Contact Metav Werkzeuge for supply from Emmerich and expert advice on integrating the Kukamet horizontal clamp 111 into existing fixtures. Technical data Article number: B111-3-D-L-C2 Model: 111 Brand: Kukamet Eclass: 21041719 ETIM: EC011973 Facts Maximum holding force: 2,500 N Maximum pressing force: 2,300 N Arm length: 118 mm Angle: 90° Weight: 0.3 kg Special features Massive clamping arm Safety lock Horizontal mounting foot Blackened burnished finish FAQ What clamping forces does the horizontal clamp provide? The Kukamet horizontal clamp 111 provides a maximum holding force of 2,500 N and a pressing force of 2,300 N, suitable for secure retention in fixtures. Can the clamp be mounted directly to a workbench or jig? Yes, the unit features a horizontal mounting foot that is intended for bolting directly to benches, fixtures and welding jigs. Is the clamp suitable for repetitive production use? The robust arm construction and safety lock on the Horizontal clamp 111 ensure repeatable operation and safe clamping cycles, making it appropriate for repetitive tasks. What is the arm reach and how does it affect setup? The clamp has an 118 mm arm length, which offers reach for most small to medium fixtures while keeping the overall footprint compact. What finish does the clamp have and how does it affect durability? The clamp is supplied with a blackened burnished finish that provides a durable surface and consistent contact behaviour over time. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 160mm Arm, 1,200N Hold Force, Massive Holding Arm - Kukamet
Take advantage of the combination of robust clamping force, a massive holding arm and compact mounting for reliable, repeatable fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 113 horizontal clamp by Kukamet — 90° angle mounting, massive holding arm The 113 horizontal clamp secures workpieces at a fixed 90° angle for repetitive clamping tasks in workshops and production lines. Massive holding arm for reliable clamping 1,200 N holding force for secure fixturing 1,000 N clamping force for demanding tasks Angle foot mounting for stable 90° installation Consistent, powerful clamping that speeds up series production With a holding force of 1,200 N and a clamping force of 1,000 N, this clamp delivers measurable performance for repeated operations. The numeric forces indicate how much load the device withstands before slipping, which makes planning of fixtures straightforward and reduces rework. Specified forces translate directly into higher throughput and shorter setup cycles when used in jigs or assembly fixtures. The compact footprint and clear mechanical specification support integration into lean production sequences where predictable, strong clamping is required. Robust construction designed for long service life in workshops The clamp features a massive holding arm and a blackened finish that reduces glare and resists light surface wear, combining solid mechanics with an understated industrial appearance. The 160 mm arm provides reach for a variety of workpiece sizes while keeping the centre of gravity close to the mounting base. Built for repeated actuation, the component’s materials and design reduce the risk of premature fatigue in frequently used fixtures. These attributes contribute to dependable operation and fewer unplanned stoppages during batch runs. Practical mounting and versatile use in fixtures and jigs The clamp is supplied with an angle foot for fixed 90° installation, enabling quick alignment in standard fixturing setups and CNC workstations where lateral clearance is limited. The mounting method ensures a stable connection to plates and bases, simplifying repeatable positioning of parts. Due to its compact mass and clearly defined mechanical data, the unit is suitable for both manual and semi-automated stations, offering a straightforward way to improve clamp repeatability without complex retrofitting. Choose Kukamet quality with the 113 horizontal clamp (SKU B113-2-D-C3) — contact Metav Werkzeuge for ordering and technical advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: B113-2-D-C3 GTIN: 8680731507423 eClass: 21041719 ETIM: EC011973 Facts Weight: 0.306 kg Arm length: 160 mm Angle: 90° Max. clamping force: 1000 N Max. holding force: 1200 N Special features Mounting: angle foot Finish: blackened finish Feature: massive holding arm FAQ What holding and clamping forces does the clamp provide? The clamp delivers a holding force of 1,200 N and a clamping force of 1,000 N; these values describe the maximum static retention and active clamp pressure respectively for the 113 horizontal clamp from Kukamet. Is the clamp suitable for use in series production fixtures? Yes, the combination of a massive holding arm and defined force ratings makes the 113 horizontal clamp well suited to repetitive fixturing and series production applications. How is the clamp mounted to a fixture plate? Mounting is via an angle foot for fixed 90° installation, enabling stable attachment to plates and bases in typical workshop and production setups. What material and finish does the clamp have? The clamp has a blackened finish, providing surface protection and a reduced-reflective industrial appearance while supporting workshop durability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 2.3 kN Closing Force, Stainless Steel, Horizontal Foot - Kukamet
Combining a stainless steel body, 2,300 N clamping force and a compact 90° lever layout, this clamp provides secure, repeatable holding for fixtures and jigs; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 111 (S111-3) by Kukamet – stainless steel, 2.3 kN clamping force A compact Horizontal clamp 111 designed for horizontal mounting and robust workpiece retention in assembly, welding and testing fixtures. Stainless steel construction Clamping force up to 2,300 N M8x50 pressure spindle included Horizontal foot, 90° lever position Reliable clamping for continuous production The clamp delivers a defined clamping force of 2,300 N and a holding force of 2,500 N, giving clear, verifiable values for fixture design and load calculations. These measured forces support process stability and reduce rework by keeping components immobile during machining or assembly. The numeric specifications enable planners to compare options objectively and to integrate the device where a compact, high-retention solution is required. Easy mounting and compact integration The horizontal foot mounting and 90° lever orientation allow straightforward installation into existing jigs and test benches without complex adapters. The integrated M8x50 pressure spindle permits fine adjustment of contact pressure and compensates for part tolerances, while the low mass of 0.34 kg minimises added inertia in automated fixtures. These characteristics translate into faster setup times and lower fixture complexity. Corrosion-resistant design for demanding environments Constructed from stainless steel, the unit resists corrosion and maintains surface integrity in humid workshops or light wash-down applications. The durable finish reduces maintenance needs and preserves repeatability over long service intervals. Where part cleanliness and longevity matter, the material choice ensures reliability without frequent replacement or extra protective measures. Practical performance for everyday clamping tasks Built to a simple, robust design, the clamp supports diverse workshop tasks such as assembly, positioning and holding during inspection. The 90° lever angle provides clear actuation geometry for automated or manual handling, while the compact footprint frees up valuable bench and fixture space. The combination of precise mechanical data and solid construction makes the device well suited for production, repair and prototyping environments. Contact Metav Werkzeuge for personalised ordering and application advice on the Kukamet Horizontal clamp 111 (S111-3) — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: S111-3 GTIN: 8680731503944 Manufacturer: Kukamet Core specifications Clamping force: 2,300 N Holding force: 2,500 N Weight: 0.34 kg Angle: 90° Pressure spindle: M8x50 Materials & features Material: stainless steel Mounting type: horizontal foot Special features: none FAQ What is the maximum clamping force of this clamp? The clamp provides a clamping force of 2,300 N and a holding force of 2,500 N, suitable for many fixture and assembly applications. Can the clamp be adjusted for different workpiece thicknesses? Adjustment is achieved via the M8x50 pressure spindle, allowing fine tuning of contact position and pressure for varying part dimensions. Is the clamp suitable for corrosive environments? The stainless steel construction gives enhanced resistance to corrosion and makes the clamp appropriate for environments with occasional humidity or light cleaning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 2.3 kN Closing Force, Zinc Plated, Right-Angle Base - Kukamet
Take advantage of a compact, galvanised construction combined with dependable clamping and holding forces for steady fixture performance; order the Horizontalspanner 113 directly via Metav Werkzeuge or consult our advisors for integration support Horizontalspanner 113 — Kukamet angle-base horizontal lever clamp, galvanised, 2.3 kN clamping force Horizontalspanner 113 is a compact horizontal lever clamp designed to secure workpieces at 90° in jigs, fixtures and assembly stations for light- to medium-duty production Galvanised steel for corrosion resistance 2.3 kN clamping force for reliable hold Lightweight at 0.42 kg for easy handling Angle-base mounting for 90° fixture integration Consistent hold for repetitive production processes The Horizontalspanner 113 delivers a measurable clamping performance with a 2.3 kN clamping force and a 2.5 kN maximum holding capacity, providing predictable results in repeat operations. These rated forces translate into a stable, vibration-resistant grip that reduces rework and rejects. For production planners, the precise force specification supports risk assessment and fixture design choices, enabling more efficient cycle planning and less downtime. Built for durability and compact handling Constructed from galvanised material, this horizontal lever clamp resists surface corrosion in everyday workshop environments without the need for special coatings. At only 0.42 kg, the unit is easy to position and handle during assembly of jigs, yet robust enough for continuous use. The M8x50 pressure spindle allows straightforward adjustment of contact pressure and compensation for part tolerances, combining longevity with operator convenience. Quick integration into 90° fixtures and clamping stations The angle base allows direct installation into right‑angled fixtures, making the clamp suitable for modular tooling and machine beds. The horizontal lever action reduces the required clearance above the workpiece and simplifies loading and unloading. By integrating a compact horizontal clamp rather than a bulkier device, engineers can free up valuable table space and shorten set-up times, improving overall workstation ergonomics and throughput. Practical fit for workshops and small production lines This lever clamp is aimed at toolroom technicians, fixture builders and small-series manufacturers who value compact design and consistent performance. The uncomplicated construction and clear technical values support fast specification in CAD and parts lists. Supplied by Kukamet and distributed through Metav Werkzeuge, the unit benefits from reliable European logistics and the supplier’s quality control filter, helping to maintain uninterrupted workshop supply. Contact Metav Werkzeuge to discuss the Kukamet Horizontalspanner 113 for your fixture project — our Emmerich team will advise on integration and supply: +49 2822 7131930, info@metav-werkzeuge.com Technical data Article number: 113-3 GTIN: 8680731500820 Manufacturer: Kukamet Facts Clamping force max: 2300 N (2.3 kN) Holding force max: 2500 N (2.5 kN) Weight: 0.42 kg Angle: 90° Spindle: M8x50 ECLASS: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: angle base (Winkelfuß) Clamp type: horizontal lever clamp Special features: none FAQ How much clamping force does the clamp provide? The Kukamet Horizontalspanner 113 offers a clamping force of 2300 N (2.3 kN) with a maximum holding capacity of 2500 N (2.5 kN). What material is the clamp made from and how does it resist corrosion? The unit is made from galvanised steel, giving the clamp basic corrosion protection suitable for general workshop environments. What mounting method is required for installation? The clamp uses an angle base for 90° fixture mounting, making it suitable for direct installation into right-angled jigs and assemblies. Which spindle is fitted and how is pressure adjusted? An M8x50 pressure spindle is fitted, allowing manual adjustment of contact pressure to accommodate part tolerances. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 4.5 kN Thrust, 5 kN Holding Force, M12x80 Spindle, Black Oxide - Kukamet
Take advantage of the combination of 4,500 N clamping force, an angled base for 90° mounting and an adjustable M12×80 pressure spindle to secure components reliably in jigs and fixtures; order the Horizontal toggle clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal toggle clamp 113 — horizontal clamp with 4,500 N clamping force (Kukamet) The Horizontal toggle clamp 113 is a compact horizontal clamping device designed for fixed-position workholding in jigs, fixtures and assembly processes, providing robust mechanical locking at a 90° clamp angle. 4,500 N clamping force for secure fixtures 5,000 N holding force for vibration resistance Angled base for flexible mounting at 90° M12×80 pressure spindle for precise adjustment Reliable clamping performance for production and assembly The clamp offers consistent mechanical locking thanks to its high nominal clamping force and elevated holding capacity, which reduces slippage and rework in repetitive operations. With a rated clamping force of 4,500 N and a holding force of 5,000 N, the device is suitable where firm, repeatable retention is required. The adjustable M12×80 pressure spindle allows fine tuning of contact pressure, while the compact build contributes to fast cycle times and minimal interference in tight fixture arrangements. Such measurable performance supports efficient throughput and predictable process behaviour. Flexible mounting and straightforward integration into fixtures Engineered for simple attachment, the clamp’s angled base permits installation on vertical or angled mounting plates without additional adapters, saving set-up time and reducing spare-part requirements. The 90° clamp orientation fits common jig geometries, and the blackened, brünished finish provides corrosion resistance and a discreet workshop appearance. Integration is simplified by the standardised spindle thread and the clamp’s compact mass of 1.84 kg, which eases handling during fixture assembly and minimises load on support structures. Durable finish and dependable supply for workshop standards Constructed with a hardened mechanism and a blackened finish that reduces surface glare and wear, the unit is designed for long service intervals under regular workshop use. The horizontal toggle concept combines mechanical simplicity with longevity, resulting in low maintenance demands and predictable life-cycle costs. Delivered through Metav’s European distribution hub, the clamp benefits from a transparent supply chain and the company’s experience in precision tooling, which supports reliable replenishment and consistent product quality. Contact Metav Werkzeuge for specification advice and to secure supply of the Kukamet Horizontal toggle clamp 113 — Metav’s technical team in Emmerich is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B113-5 GTIN: 8680731507546 eClass: 21041719 ETIM: EC011973 Core technical data Clamping force: 4,500 N Holding force: 5,000 N Weight: 1.84 kg Clamp angle: 90° Pressure spindle: M12×80 Special features Angled base (Winkelfuß) for 90° mounting Blackened (brünished) finish Horizontal toggle clamp design Lever-clamp family (hebelspanner) Category: Clamps FAQ What clamping force can be expected from this clamp? The Kukamet Horizontal toggle clamp 113 provides a clamping force of 4,500 N with a holding capacity listed at 5,000 N, offering secure retention for many jigs and fixture applications. How is the clamp fixed to a fixture plate? The unit features an angled base for mounting at 90°, allowing direct attachment to vertical or angled fixture plates without additional adapters. Is the pressure spindle adjustable and what size is it? Yes, the clamp uses an M12×80 pressure spindle, enabling precise adjustment of contact position and clamping preload. What is the weight and footprint of the clamp for planning fixtures? The clamp weighs 1.84 kg, and its compact horizontal design reduces interference in dense fixture arrangements. What surface treatment does the clamp have and why does it matter? The part is finished in a blackened (brünished) surface, which enhances wear resistance and reduces surface reflections in workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp With 5 kN Holding Force, 4.5 kN Closing Force, Massive Arm & Safety Lock - Kukamet
Take advantage of the combination of a robust holding arm, compact mounting and high retention force for dependable clamping in production. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 — horizontal clamp with 229 mm arm and 5,000 N holding force by Kukamet Horizontal clamp 112 is a lever clamp designed for secure workholding in jigs, fixtures and small-batch production where space, strength and repeatability matter Massive holding arm with safety lock 5,000 N holding force for secure fixtures 229 mm arm length for reach and clearance Vertical base mounting for compact set-ups Secure retention that reduces rework The clamp delivers a 5,000 N holding capacity combined with a maximum pressing force of 4,500 N, providing a measurable, reliable clamping result for repetitive operations. The robust holding arm and integrated safety lock keep components stable during machining or assembly, which reduces part movement and the need for corrective work. For users less familiar with clamping data, holding force refers to the maximum load the device resists without releasing; this is a direct indicator of how well a fixture will hold workpieces under process forces. Space-efficient design for versatile fixture layouts With an arm length of 229 mm and a vertical base mount, the unit is tailored to fixtures where horizontal clearance is limited but reach is required. The compact footprint and 90° operating angle facilitate placement close to other tooling or adjacent clamps, improving workflow density on modular plates. Finished in a blackened finish, the clamp resists superficial corrosion and presents a low-reflectivity surface that is useful in optical inspection setups and assembly lines. Durable construction that supports long service cycles Constructed with a massive holding arm and a lever mechanism developed for frequent operation, the clamp combines low mass — 1.42 kg — with structural rigidity to balance manoeuvrability and longevity. The mechanical design keeps maintenance straightforward: routine checks on the locking mechanism and lubrication of the pivot points are sufficient to maintain performance. Supplied by Kukamet, the unit is suitable where dependable, low-maintenance clamping is a priority and consistent part location is required. Contact Metav Werkzeuge for advice on integrating the Kukamet horizontal clamp 112 into existing fixtures, or to arrange supply from our Emmerich warehouse and European quality filter. Technical Data SKU: B112-5-D-L-C3 Product: Horizontal clamp 112 Manufacturer: Kukamet Core data Arm length: 229 mm Holding force max: 5,000 N Pressing force max: 4,500 N Weight: 1.42 kg Angle: 90° eCl@ss: 21041719 ETIM: EC011973 Special features Vertical base mounting Massive holding arm Safety lock Blackened finish Lever clamp (lever operation) Category: Clamps / Spanner FAQ What materials can be clamped with this lever clamp? The clamp is suitable for a broad range of workpiece materials; selection of clamping pads and fixturing accessories dictates specific compatibility for delicate or coated parts when using the Horizontal clamp 112 from Kukamet. How does the holding force relate to machining applications? Holding force (5,000 N for this model) indicates the maximum static retention; for dynamic machining forces the pressing force of 4,500 N and correct fixture design determine safe operation with the Kukamet horizontal clamp. Is the clamp suitable for dense fixture patterns on tooling plates? Yes, the compact footprint, 229 mm arm and vertical base mounting allow close spacing in dense fixture layouts without compromising access or stability. What maintenance is required to keep the clamp reliable? Periodic inspection of the pivot and locking mechanism and light lubrication are recommended; the durable construction and blackened finish help reduce routine upkeep for long service cycles. Does the clamp include a safety mechanism to prevent accidental release? A mechanical safety lock is integrated to prevent unintended opening during process steps, improving operator safety and process reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com