Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
90° 93mm Horizontal Clamp, Solid Holding Arm, 850N Closing Force, 1000N Holding Force, Blackened - Kukamet
Take advantage of the 112 horizontal clamp's combination of a 1,000 N holding force, a massive holding arm and a compact 93 mm reach for secure, repeatable fixturing. Order directly via Metav Werkzeuge or ask our consultants for configuration and delivery from Emmerich. Kukamet 112 Horizontal clamp — 1,000 N holding force, 93 mm arm Kukamet 112 Horizontal clamp designed as a robust 90° toggle clamp for jigs, fixtures and light‑assembly tasks where repeatable, secure holding is required Massive holding arm for rigid clamping Vertical-foot mount for stable attachment 1,000 N holding force at 90° clamp Consistent, measurable clamping performance With a rated holding force of 1,000 N and a maximum actuation force of 850 N, this horizontal toggle clamp delivers predictable retention for short‑run assembly and prototyping tasks. The force ratings are useful when planning fixture layouts or when comparing clamping solutions: the numerical values enable straightforward selection for parts that require defined clamping pressure. The device’s repeatable action reduces repositioning and inspection time, supporting efficient production cycles. Robust construction for workshop conditions The clamping mechanism incorporates a massive holding arm and a blackened finish, combining mechanical stiffness with improved surface protection. A 93 mm arm provides a practical lever length for most light‑duty fixtures while the vertical‑foot mount enables a compact attachment to plates or bases. At just 0.136 kg, the component adds negligible mass to assemblies yet contributes significant structural stability where it is fitted. Easy integration into existing jigs and fixtures Engineered as a horizontal toggle clamp, the product slips into established clamping patterns without complex modifications. The 90° clamp angle suits right‑angle seating and edge fixation, and the clamp’s simple mounting arrangement allows quick positioning in modular setups. For questions about fixing dimensions or to check compatibility with specific fixtures, technical advice is available to ensure smooth integration. Low-maintenance operation and reliable supply chain The mechanical design is intentionally straightforward to limit wear and simplify periodic checks; fewer moving parts and the sturdy holding arm reduce maintenance intervals. Metav’s role as a precision supplier adds procurement confidence: stock and quality control from Emmerich support timely delivery and consistent product standards across batches. Discuss the Kukamet 112 horizontal clamp with Metav Werkzeuge to confirm suitability for specific fixtures and to arrange delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: B112-1-D-C2 GTIN: 8680731507140 Manufacturer: Kukamet ECLASS: 21041719 ETIM: EC011973 Core data Holding force: 1,000 N Maximum actuation force: 850 N Arm length: 93 mm Clamp angle: 90° Weight: 0.136 kg Features Horizontal toggle clamp Vertical-foot mounting Massive holding arm Blackened finish 90° clamping action FAQ What is the maximum holding force of the clamp? The Kukamet 112 horizontal clamp provides a holding force of up to 1,000 N (SKU B112-1-D-C2), a specification intended for planning fixture retention and comparative selection. How is the clamp mounted? The device uses a vertical‑foot mount that allows stable attachment to fixture plates or baseplates; the mounting arrangement suits compact layouts and straightforward bolting. What protective finish does the clamp have? The clamp is supplied with a blackened finish, offering improved surface protection compared with untreated steel and helping to reduce the visibility of minor wear. What are the key dimensions to consider when integrating this clamp? Key values are a 93 mm arm length and a 90° clamping angle; the weight is approximately 0.136 kg. These figures help determine clearance and lever geometry in a fixture. Is this a toggle clamp or a different clamping type? This is a horizontal toggle clamp (lever‑actuated), designed to provide quick, repeatable 90° clamping suitable for jigs and light assembly operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 1000 N Clamping Force, Massive Holding Arm, Vertical Base, Blackened Finish - Kukamet
The robust combination of a massive holding arm, a 166 mm reach and a holding force of 1,200 N ensures secure, repeatable clamping for everyday workshop tasks. Benefit from a compact, light design that supports efficient setup and fast cycle times. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 — horizontal clamp with 166 mm arm and 1,200 N holding force (Kukamet) A Horizontal clamp 112 designed for secure horizontal clamping in workshop and light industrial applications, featuring a solid holding arm and vertical base for stable mounting. Massive holding arm for robust clamping 166 mm arm length for extended reach Holding force up to 1,200 N Vertical base for straightforward mounting Reliable clamping performance for consistent production The clamp delivers high holding force with a maximum holding capacity of 1,200 N, combined with a defined pressing force of 1,000 N to secure workpieces during machining or assembly. The solid construction minimises flex under load, which reduces rework by stabilising parts during operations. Designed for repetitive use, the device supports accurate positioning at a fixed right angle (90°) and helps maintain consistent process quality across runs, translating into predictable throughput and reduced downtime. Compact design that simplifies workstation integration With a reach of 166 mm and a weight of just 0.254 kg, the unit integrates easily into crowded fixtures and reduces added mass on assemblies. The vertical base mounting allows for straightforward attachment to plates or tooling blocks, speeding up fixture set-up and changeover times. A dark, blackened finish provides corrosion-resistant protection while remaining unobtrusive in the work environment. These attributes make the clamp suitable where space is at a premium but reliable clamping is essential. Broad applicability and dependable construction Intended for general clamping tasks, the component performs well across routine workshop applications where a durable toggle-style horizontal clamp is required. The massive holding arm improves resistance to lateral forces, supporting machining, inspection and light assembly tasks. Built for endurance, the item is a practical choice for engineers and toolroom staff seeking a balance of strength, reach and compactness without unnecessary complexity. For tailored advice on integrating the Kukamet Horizontal clamp 112 into existing fixtures, contact Metav Werkzeuge for practical recommendations and delivery options Technical data SKU: B112-2-D-C3 GTIN: 8680731507201 Name: Horizontal clamp 112 Brand: Kukamet Facts Arm length: 166 mm Holding force: 1,200 N Pressing force: 1,000 N Weight: 0.254 kg Angle: 90° eCl@ss: 21041719 ETIM: EC011973 Special features Vertical base mounting Massive holding arm Blackened (blued) finish Compact, lightweight design FAQ What maximum holding force does the clamp provide? The Kukamet Horizontal clamp 112 offers a maximum holding force of 1,200 N, enabling secure fixation of workpieces during machining and assembly. Can the clamp be mounted directly to a tooling plate? Yes, the clamp uses a vertical base mounting that allows direct attachment to tooling plates or fixture blocks for stable integration in jigs and fixtures. Is the arm length suitable for extended reach applications? The 166 mm arm length provides extended reach for many standard workstation setups while maintaining a compact footprint for versatile positioning. What finish protects the clamp against corrosion? The component is supplied with a blackened (blued) finish that offers corrosion resistance suitable for typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 110mm Arm Massive Holding Arm, 1,000N Press Force, 1,200N Hold Force - Kukamet
Take advantage of a compact, heavy-duty lever clamp that combines a 110 mm solid holding arm with a maximum holding force of 1,200 N and 90° angle-foot mounting for secure, repeatable workholding. Order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 113 — Lever clamp with 110 mm arm and 1,200 N holding force by Kukamet Horizontal clamp 113 is a workshop-grade lever clamp intended for fixed 90° configurations where stable, repeatable clamping is required Solid 110 mm holding arm 1,200 N maximum holding force 90° angle-foot mounting Black burnished finish Consistent clamping performance reduces rework and cycle time The clamp delivers a maximum holding force of 1,200 N and a pressing capability of 1,000 N, a combination that provides reliable fixation for a wide range of machining and assembly tasks. The lever mechanism converts operator input into a high, repeatable clamping output, ensuring parts remain stationary during cutting or inspection. This performance reduces the risk of workpiece movement, lowering scrap rates and saving time on rework. The compact geometry and 110 mm arm length balance reach and rigidity, making the device suitable for fixtures where space is limited but secure retention is essential. Simple integration with angle-foot mounting for stable set-ups Fitted with an angle foot for right-angle attachment, the clamp is intended for permanent or semi-permanent fixture installation. The 90° mounting orientation facilitates quick alignment on vertical or horizontal plates and supports straightforward positioning within a jig or machine table. The mounting style minimises assembly steps and supports consistent repeatability in production environments. Where fixture space and repeat accuracy matter, this design reduces set-up time and contributes to a more efficient workflow. Durable design with low maintenance for everyday workshop use Finished in a black burnished surface and featuring a solid holding arm, the clamp resists wear in demanding environments while retaining smooth lever action. The compact unit weighs approximately 0.282 kg, offering a high strength-to-weight ratio that eases handling during fixture assembly without compromising robustness. The corrosion-resistant finish provides basic environmental protection, and the simple mechanical construction allows straightforward inspection and replacement of wear components, supporting long-term uptime with minimal maintenance. For robust, repeatable clamping choose the Kukamet Horizontal clamp 113 — contact Metav Werkzeuge in Emmerich for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: B113-2-D-C2 GTIN: 8680731507416 Category: Spanner ECLASS: 21041719 ETIM: EC011973 Measured values Arm length: 110 mm Maximum holding force: 1,200 N Maximum pressing force: 1,000 N Angle: 90° Weight: 0.282 kg Materials & features Finish: black burnished Mounting type: angle foot Design: lever clamp with solid holding arm Robust holding arm: yes FAQ What is the primary application of this clamp? The Horizontal clamp 113 by Kukamet is designed for fixed 90° fixture applications where secure, repeatable clamping is required, for machining, assembly and inspection set-ups. How much clamping force does the unit provide? The lever clamp offers a maximum holding force of 1,200 N and a pressing force rating of 1,000 N, giving dependable retention for medium-duty workshop tasks. How is the clamp mounted to a fixture or plate? Mounting is via an angle foot at 90°, enabling attachment to vertical or horizontal plates for stable fixture integration. Is the clamp suitable for heavy-duty industrial use? With a solid holding arm and a black burnished finish, the clamp is intended for daily workshop use and provides durable performance in production environments. What are the key dimensions to consider when integrating the clamp? Key dimensions are the 110 mm arm length, the unit weight of 0.282 kg and the 90° mounting angle; these govern reach, mass, and mounting orientation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 117mm Arm Massive Hold Arm With Safety Lock, 4.5kN Thrust - Kukamet
Take advantage of a combination of robust construction, measurable holding and clamping forces, and compact weight for reliable fixturing in production environments; order the clamp directly via Metav Werkzeuge or contact our consultants for application advice. Horizontal clamp 113 — horizontal toggle clamp with 90° angled foot and massive holding arm (Kukamet) The Horizontal clamp 113 is a lever-operated horizontal clamp designed for secure 90° fixtures in machining and assembly applications. Massive holding arm with safety lock 90° angled foot mounting Holding force up to 5,000 N Compact 1.84 kg robust design Secure, repeatable clamping for production workflows The horizontal toggle design provides a consistent clamping force and a short actuation path, ensuring parts are held reliably during machining or assembly. With a measured holding force of 5,000 N and a clamping force of 4,500 N, the device enables predictable fixture behaviour that benefits process planning and reduces rework. The lever mechanism converts manual input into reliable restraint, supporting both short-cycle production and occasional set-up tasks while maintaining positional stability. Built for workshop durability and safety A massive holding arm combined with an integrated safety locking mechanism reduces the risk of accidental release and extends the useful life under frequent use. The component is finished in a blackened finish that offers surface protection against everyday wear and supports corrosion resistance in standard workshop environments. The compact construction at 1.84 kg minimises added mass on fixtures while still delivering robust performance, which helps protect jigs and machine tables from unnecessary loading. Quick installation and versatile mounting options Fitted with an angled foot for 90° mounting, the clamp simplifies alignment on frames, fixtures and assembly jigs, enabling fast integration into existing setups. The straightforward mechanical attachment reduces set-up time and allows for repeatable repositioning. The simple lever action and safety latch make the clamp suitable for both skilled operators and production staff who require rapid, reliable clamping without complex adjustment. Where precision fixturing is required, the compact form factor and clear mechanical parameters support predictable results. For tailored advice on integrating the Kukamet horizontal clamp 113 into production fixtures or to reserve stock for an upcoming project, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data Article number: B113-5-D-L-C1 ECLASS: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 117 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Weight: 1.84 kg Angle: 90° Special features Mounting: angled foot Massive holding arm Safety locking mechanism Finish: blackened Category: Horizontal clamp FAQ What materials can be clamped with this device? The Kukamet horizontal clamp 113 is a mechanical clamping device suitable for general fixturing of metal and non-critical composite components; material-specific cutting or machining limits depend on the overall fixture and process. How is the clamp mounted to a fixture? Mounting is via the angled foot at 90°, allowing secure attachment to plates or frames; the 90° foot simplifies alignment on standard fixtures. What forces can be expected during operation? The clamp provides a clamping force of up to 4,500 N and a holding force of up to 5,000 N, values that define usable limits for secure fixturing in many workshop processes. Is there a safety feature to prevent accidental release? Yes, the unit includes a safety locking mechanism and a massive holding arm to reduce the risk of unintentional opening under load. What is the product’s weight and how does that affect fixtures? The clamp weighs 1.84 kg, offering a balance between robustness and low added mass for versatile fixture design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 117mm Massive Holding Arm 5,000 N Holding Force, 4,500 N Closing Force - Kukamet
Combine a robust holding arm, high clamping forces and a compact 90° angle base to secure jigs and fixtures with confidence; benefit from straightforward integration, long service life and reliable repeatability. Order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — Kukamet horizontal toggle clamp, 5,000 N holding force, 90° angle base A Horizontal clamp 113 designed for secure horizontal clamping in jigs, fixtures and assembly applications, featuring a sturdy arm and compact angled mounting for space-efficient installation 90° locking angle for consistent positioning Robust holding arm for heavy-duty use Up to 5,000 N holding force 117 mm arm length for extended reach Blackened finish for corrosion resistance Reliable clamping performance that supports throughput The clamp delivers consistent holding force and rapid actuation for repetitive production tasks. With a rated holding force of 5,000 N and a maximum applied pressure of 4,500 N, the device ensures secure fixation of workpieces during machining, welding or assembly. The combination of measured clamping values and a substantial arm length of 117 mm reduces the need for repeated adjustments and supports higher machine utilisation. These quantifiable strengths translate directly into less rework and improved process stability. Simple integration into existing fixtures and jigs Engineered for quick installation, the unit uses an angle base that fixes at a 90° locking angle, enabling straightforward mounting on benches, plates or fixture plates. The compact footprint and standard fixing geometry make retrofit into existing tooling simple, reducing downtime during changeovers. The toggling mechanism provides rapid open/close cycles, which benefits automated sequences or manual operations that require frequent clamping and unclamping. Durability and serviceability for daily workshop use Constructed with a massive holding arm and a blackened finish, this clamp resists wear and minor corrosion while maintaining alignment under load. The robust design minimises deformation risk and supports steady repeatability over prolonged use. Where occasional maintenance is required, the straightforward mechanical layout keeps servicing and replacement of wearable parts efficient, helping to preserve uptime and reduce total cost of ownership. Procurement advantage and confidence from a trusted supplier Sourcing the clamp via Metav provides more than a single item: it connects procurement to a curated supply chain with comprehensive stock and technical filtering in Emmerich. Metav’s broad range and long-standing market presence bring transparency to delivery and specification matching, which is particularly valuable for small and mid-size workshops seeking industrial-grade clamping technology without compromising on quality or supply reliability. Contact Metav Werkzeuge for detailed ordering information and expert advice on integration and delivery for the Kukamet Horizontal clamp 113 Technical Data SKU: B113-5-D-C1 GTIN: 8680731507553 Brand: Kukamet Weight: 1.705 kg Facts Arm length: 117 mm Holding force: 5,000 N Maximum applied pressure: 4,500 N Locking angle: 90° Special features Angle base mounting (Winkelfuß) Massive holding arm Blackened finish (Schwarz brüniert) Category: Toggle clamp / Horizontal clamp FAQ What is the maximum holding force of this clamp? The clamp achieves a maximum holding force of 5,000 N, providing secure fixation for a wide range of workshop applications. Is the clamp suitable for fixture plates and jig systems? Yes, the 90° angle base and compact design make it suitable for integration into fixture plates and jig systems where horizontal clamping is required. What is the arm reach and how does it affect clamping range? The arm length is 117 mm; this extended reach permits clamping of larger or offset workpieces while maintaining stable hold-down force. Which finish is applied and what are the benefits? A blackened finish reduces the risk of surface corrosion and improves wear resistance, supporting longevity in workshop environments. Who manufactures this clamp and what is the SKU? The clamp is manufactured by Kukamet and is listed under SKU B113-5-D-C1 for clear identification in procurement. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 118mm Arm, Massive Clamp Arm & Safety Lock, 2.3kN Pressure, Blackened Finish - Kukamet
Take advantage of a compact fixture clamp that combines up to 2,500 N holding force, a massive holding arm with safety lock, and a vertical-foot mounting for straightforward integration into production jigs. Order the clamp via Metav Werkzeuge or consult our advisors for installation and application guidance. Horizontal clamp 112 by Kukamet — robust horizontal lever clamp with safety lock The Horizontal clamp 112 is a compact horizontal lever clamp designed for reliable workholding in jigs, fixtures and general assembly operations, combining high clamping forces with a space-saving vertical-foot mount Robust holding arm with safety lock Up to 2,500 N clamping force Vertical-foot mount, 90° position Consistent clamping power for repeatable results The clamp delivers a measurable clamping performance with a maximum holding force of 2,500 N and a maximum pressing force of 2,300 N, values that translate directly into more reliable fixtures and fewer rework cycles. Measurable figures such as these support efficient process planning and reduce variance between parts; the repeatability of the clamp helps maintain tolerances across batch runs. For production environments where cycle stability matters, the quantifiable forces provide a sound basis for fixture design and risk assessment. Small footprint, easy integration into jigs and fixtures With an 118 mm arm and a total mass of just 0.3 kg, the design is optimised for confined assemblies and compact stations. The vertical-foot mounting and fixed 90° orientation enable direct bolting to plates and subplates without elaborate adapters, saving assembly time and simplifying retrofit to existing tooling. The compact dimensions reduce shadowing and interference in multi-clamp fixtures, allowing closer spacing of clamping points and consequently improving part support and machining access. Safety and durability tailored to everyday workshop use A massive holding arm combined with an integrated safety locking mechanism reduces the risk of unexpected release during handling and machining, increasing operator confidence on the shop floor. The component is finished in a blackened blued surface that helps resist corrosion and wear in general industrial environments. Durable construction and straightforward mechanical design mean predictable maintenance intervals and easy replacement of consumables, supporting continuous operation in small-series production and repair work. Choose the Kukamet horizontal clamp 112 for robust, compact workholding — contact Metav Werkzeuge for product availability and application advice from Emmerich. Technical data SKU: B112-3-D-L-C2 Product name: Horizontal clamp 112 Manufacturer: Kukamet Facts Arm length: 118 mm Maximum press force: 2,300 N Maximum holding force: 2,500 N Angle: 90° Weight: 0.3 kg eCl@ss: 21041719 ETIM: EC011973 Special features Vertical-foot mounting (senkrechter Fuß) Massive holding arm and safety locking mechanism Blackened blued finish Category: Clamping devices / Spanner FAQ What clamping forces can be expected from this clamp? The Kukamet horizontal clamp 112 specifies a maximum holding force of 2,500 N and a pressing force of 2,300 N, values that are useful for fixture design and force calculations. Is the clamp suitable for tight jigs and close spacing? Yes, the compact design with an 118 mm arm and a vertical-foot mount makes the clamp well suited to confined jigs and fixtures. Does the clamp include a locking feature for safety? The clamp is equipped with a safety locking mechanism and a masssive holding arm to prevent accidental release during handling or machining. What surface protection does the clamp have? The component is supplied with a blackened blued finish, which provides basic corrosion resistance and a robust surface for workshop use. Can this clamp be mounted directly to plates without adapters? The vertical-foot mounting and 90° orientation are designed for direct bolting to mounting plates and subplates, simplifying integration into existing tooling layouts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 129mm Arm, 5,000 N Holding Force, Solid Arm With Safety Lock - Kukamet
Benefit from a robust combination of high clamping force, a massive holding arm and simple fixture integration for consistent, repeatable production. Take advantage of the 129 mm reach and the reliable safety lock to reduce setup time and secure workpieces. Order the Kukamet Horizontal clamp 111 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp »111« – Horizontal toggle clamp with 129 mm arm, Kukamet A 111 horizontal toggle clamp designed for secure workpiece holding in jigs, fixtures and workshop assemblies. 129 mm arm for extended reach Horizontal foot mounting for fixture integration Massive holding arm with safety lock Clamping force up to 4,500 N Secure clamping power for repeatable production results The clamp provides a clear technical advantage through its 4,500 N maximum clamping force and 5,000 N maximum holding force, which together ensure that components remain fixed under load during machining or assembly. High holding and clamping values translate into improved process stability and fewer reworks; in practical terms, fixtures experience less movement and tolerances are maintained. The reliable mechanical action of the device supports consistent cycle times and predictable outcomes for production runs. Robust construction and straightforward fixture integration Constructed with a massive holding arm and a blackened finish, the unit is engineered for durability in workshop environments. The horizontal foot mounting and a 90° lever angle simplify integration into existing jigs and clamping plates, while the 129 mm arm offers extended reach for larger or irregular workpieces. At 1.4 kg, the clamp combines solidity with manageable mass, making installation and replacement straightforward. The built form and finish reduce the need for frequent replacements and support long service life under regular use. Safer operation and traceable specification for procurement Safety is addressed by the integrated safety lock, which prevents accidental opening during handling or vibration-prone processes. The device’s design as a horizontal toggle clamp allows quick manual actuation while maintaining a locked state under load, reducing downtime from unintended releases. For ordering and documentation the SKU: B111-5-D-L-C1 provides an exact reference, ensuring the correct component is specified for fixtures and assembly equipment. The combination of mechanical reliability and clear product reference supports both purchasing and quality assurance routines. Secure your fixtures with Kukamet reliability — contact Metav Werkzeuge for specialist advice and procurement support at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: B111-5-D-L-C1 Designation: Horizontal clamp "111" Manufacturer: Kukamet Facts Arm length: 129 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Weight: 1.4 kg Angle: 90° Special features Massive holding arm Safety lock Horizontal foot mounting Finish: blackened FAQ What clamping and holding forces does the clamp provide? The Kukamet horizontal clamp 111 delivers a maximum clamping force of 4,500 N and a maximum holding force of 5,000 N, providing secure fixation for many jig and fixture applications. Can the clamp be mounted to existing fixture plates? Yes, the clamp is supplied with a horizontal foot mounting designed for straightforward integration into fixture plates and jigs in workshop assemblies. How does the safety lock improve operation? The built-in safety lock on the 111 prevents unintentional release of the lever under vibration or handling, ensuring the workpiece remains secured until deliberately unlocked. Is the arm length suitable for larger workpieces? With a 129 mm arm, the clamp gives extended reach compared with compact variants, making it practical for a wide range of component sizes within fixture systems. What reference should be used when ordering this clamp? Use SKU B111-5-D-L-C1 and the designation Horizontal clamp "111" by Kukamet to ensure the correct item is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 129mm Massive Holding Arm 5,000N Holding Force, Blackened Finish - Kukamet
Robust construction with a massive holding arm, a 129 mm reach and up to 5,000 N holding force delivers consistent, repeatable clamping for small-batch and workshop production; order the Kukamet Horizontal clamp 112 directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp 112 — Kukamet lever clamp with vertical foot and 129 mm reach A Horizontal clamp 112 designed as a lever-operated workholding solution for metalworking and general workshop applications, providing secure, fast clamping where repeatability and space-saving mounting are required Vertical base for stable mounting Massive holding arm 129 mm arm length for extended reach Up to 5,000 N holding force Reliable clamping that keeps production moving The design focuses on measurable performance: a 5,000 N holding force combined with a massive holding arm reduces part movement under load and maintains positional accuracy across repeated cycles. The robust construction minimises elastic deformation during clamping, which contributes directly to shorter setup times and fewer rejected parts. For production environments where consistent grip and repeatability are critical, this configuration supports reliable process control and less rework. Fast lever action for efficient cycles A lever-operated concept with a defined 90° angle enables rapid engagement and release, giving practical gains in cycle time without complex mechanisms. The unit provides a 4,500 N clamping force under dynamic operation, which is sufficient for many workshop fixtures and jig applications. The simple mechanical action is easy to integrate into fixtures or manual workflows, offering clear efficiency benefits through straightforward handling and lower actuation effort compared with bulkier systems. Compact, corrosion-resistant finish for workshop resilience Finished in a blackened finish, the clamp resists surface corrosion and handles everyday workshop conditions with reduced maintenance requirements. With a reach of 129 mm and a compact mass of 1.385 kg, the component is easy to position and mount while still providing substantial holding capability. The combination of compact footprint and durable surface treatment supports flexible placement on benches or fixtures, preserving workspace while prolonging service life. Practical applications and mounting advantages Engineered for bench and fixture installation, the vertical foot mounting simplifies attachment and alignment on machine tables or dedicated jigs. The lever clamp format suits repetitive assembly operations, clamping for machining setups and fixture-based inspection tasks. The defined lever geometry and sturdy arm reduce the need for frequent adjustments, supporting faster changeovers and consistent part handling in mixed-production environments. Contact Metav Werkzeuge for application-specific recommendations and supply from Emmerich — Tel +49 2822 7131930 or e-mail info@metav-werkzeuge.com Technical data SKU: B112-5-D-C1 GTIN: 8680731507331 Manufacturer: Kukamet Facts Arm length: 129 mm Holding force: 5,000 N Max clamping force: 4,500 N Weight: 1.385 kg Angle: 90° Special features Vertical foot mounting Massive holding arm Blackened finish Lever clamp design FAQ What materials is the clamp suitable for? The Kukamet Horizontal clamp 112 is suitable for general workshop applications and provides secure clamping for common machinable materials; selection should be matched to the fixture and process requirements. How is the clamp mounted? Mounting is by the vertical foot; the design facilitates direct bench or fixture attachment and fixed alignment at a 90° lever position for reliable operation. What forces can be expected during use? The device offers a holding force of up to 5,000 N and a maximum clamping force of 4,500 N, which supports secure positioning in many metalworking and assembly tasks. Which feature reduces corrosion in workshop environments? The blackened finish on the Horizontal clamp 112 provides surface protection that lessens corrosion risk and reduces routine maintenance demands. Is the arm length suitable for reach-critical fixtures? With a 129 mm arm length, the clamp balances reach and compactness, making it appropriate for fixtures where extended reach is needed without sacrificing rigidity. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 141mm Arm, Massive Holding Arm & Safety Lock, 3.65kN Hold Force - Kukamet
Combine a high clamping performance with a compact, lightweight design for secure and versatile fixture use; the robust holding arm and safety lock ensure reliable repeatability under production conditions. Purchase the clamp through Metav Werkzeuge or contact the technical advisers for specification support. Horizontal clamp 113 — Kukamet horizontal toggle clamp with 3,650 N holding force The Horizontal clamp 113 is a horizontal toggle clamp designed for secure workpiece retention in jigs and fixtures, offering a 90° clamping orientation and a compact 141 mm arm. Robust holding arm with safety lock 3650 N maximum holding force 90° horizontal clamping angle Blackened finish, weight 0.94 kg Secure, measurable clamping performance for production The horizontal toggle clamp delivers 3650 N holding force, translating technical specification into tangible benefit: consistent, high-clamp retention that reduces slippage and part movement during machining or assembly. The 90° clamping geometry supports right-angle fixtures and repeatable positioning, while the 141 mm arm gives sufficient reach in compact jigs. Specified forces are measured values that allow planners to calculate clamping margins and ensure process safety, so the component selection can be integrated into existing fixture designs with predictable results. Space-saving construction that speeds up workflow A 0.94 kg body and blackened finish make the device suitable for dense fixture layouts where weight and surface treatment matter. The lightweight construction simplifies retrofitting of stations and reduces load on moving fixtures, while the protective finish helps resist wear in workshop environments. The angle-foot mounting provides a stable base for bench or plate installation and enables fast repositioning of clamps without complex substructure changes. These features together shorten set-up times and support higher throughput on small- to medium-scale production runs. Durable mechanism designed for repeatability and safety With a 3,500 N pressing force rating and a safety lock, the clamp converts mechanical input into reliable retention while guarding against accidental release during handling. The massive holding arm and locking function extend service intervals by reducing micro-movements that accelerate wear, which supports predictable maintenance planning and minimises unscheduled downtime. The mechanism’s repeatability contributes directly to process quality: fewer adjustments, less rework and improved part consistency across batches. Practical integration for fixture and jig applications The clamp is intended for fixture and jig use where a horizontal toggle clamp is required; its compact footprint and angle-foot fixing allow integration into modular tooling plates and bespoke assemblies. The device’s mechanical characteristics suit a range of production tasks where right-angle retention and a secure lock are priorities. For technical planning, the SKU B113-4-D-L-C2 and the declared specifications are suitable inputs for CAD layouts and parts lists when preparing workholding equipment. Purchase the Kukamet Horizontal clamp 113 via Metav Werkzeuge for dependable fixture clamping; contact Metav Werkzeuge in Emmerich for application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: B113-4-D-L-C2 Name: Horizontal clamp 113 eClass: 21041719 ETIM: EC011973 Numbers Max holding force: 3650 N Max pressing force: 3500 N Arm length: 141 mm Clamping angle: 90° Weight: 0.94 kg Special features Robust holding arm Safety locking mechanism Blackened finish Angle-foot mounting Horizontal toggle clamp design FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal clamp 113 provides a maximum holding force of 3650 N, allowing planners to calculate secure clamping margins for fixture design. Can the clamp be mounted on a plate or bench? Yes. Angle-foot mounting is specified for straightforward plate or bench installation and supports integration into modular tooling systems. Is there a locking mechanism for added safety? A safety locking mechanism is included; the lock maintains the clamping position and reduces the risk of accidental release during handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 143mm Massive Holding Arm Zinc‑Plated, 850 N Press Force 1000 N Hold Force - Kukamet
Take advantage of a compact, reliable clamping solution that combines a massive holding arm with zinc-plated durability and measured clamping performance for consistent fixture results — order directly via Metav Werkzeuge or consult the technical team for application advice. Horizontal clamp 112 by Kukamet — massive holding arm, zinc-plated finish A Horizontal clamp 112 designed for 90° clamping in fixtures and workholding, offering a sturdy vertical-foot mounting for jigs and repeatable production tasks. Massive holding arm for stable clamping Zinc-plated finish for corrosion resistance 143 mm arm for extended reach Clamping force 1000 N for reliable hold Closing force 850 N for secure pressure Consistent, measurable holding performance for production use The clamp delivers defined forces that simplify process design: a clamping force of 1000 N combined with a closing force of 850 N ensures repeatable retention without excessive over‑stress on components. The robust design with a massive holding arm reduces elastic deformation at the contact point, which in turn lowers scrap rates and minimises setup checks. Where reliable part retention is crucial for machining or assembly, this unit provides quantifiable performance that supports productivity and quality-control routines. Durable finish and compact handling for workshop longevity A zinc-plated surface treatment provides corrosion resistance for harsh workshop environments, while the overall weight of 0.155 kg keeps the clamp easy to position during jig assembly. The combination of a protective coating and a compact mass means longer service intervals under standard shop conditions and straightforward replacement when required. This durability translates into lower lifecycle disruption and reduced maintenance planning compared with untreated alternatives. Designed for flexible integration into fixtures and jigs The clamp features a 143 mm arm and a fixed 90° clamping orientation, together with a vertical foot mounting option that simplifies incorporation into bespoke fixtures or modular tooling plates. The straight‑forward geometry enables precise positioning and repeatable motion paths, supporting efficient setup times and improved throughput. Where tooling space is limited, the reach and orientation of the arm help maintain access to the workpiece while delivering the necessary holding action. Procurement and workshop advantages grounded in supply reliability Supplied by Kukamet and distributed via Metav Werkzeuge, this clamp aligns with a sourcing strategy that favours dependable availability and consistent quality. Choosing a component with documented mechanical data and a corrosion‑resistant finish reduces the need for frequent checks and replacement, supporting lean inventory policies and steady production flow. The product’s clear specifications make it suitable for inclusion in procurement lists where technical comparability and supplier traceability are required. Contact Metav Werkzeuge for stock confirmation and application guidance—call +49 2822 7131930 or email info@metav-werkzeuge.com to request the Kukamet Horizontal clamp 112 (SKU 112-1-D-C3) and technical documentation Technical data SKU: 112-1-D-C3 GTIN: 8680731505627 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 143 mm Angle: 90° Clamping force: 1000 N Pressing force: 850 N Weight: 0.155 kg Special features Zinc-plated finish Massive holding arm Vertical foot mounting Lever-clamp design Category: Clamps FAQ What is the maximum clamping force of the clamp? The clamping force is 1000 N; the Kukamet Horizontal clamp 112 is specified with this retention capacity for reliable workholding. How is the clamp mounted in a fixture? Mounting is by a vertical foot; the clamp is intended for secure attachment to jig plates or fixture bases in a vertical‑foot arrangement. Is the surface treated for corrosion resistance? Yes, the clamp has a zinc‑plated finish that improves resistance to corrosion in standard workshop environments. What reach does the clamp arm provide? The arm reach is 143 mm, offering extended access for components in confined or crowded tooling layouts. Which applications are suited to this clamp model? The design suits jigs, fixtures and repetitive production tasks where a defined 90° clamping action and measured forces are required; refer to SKU 112-1-D-C3 for ordering and specification checks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 158mm Arm Massive Holding Arm Zinc Coated 2.3kN Closing Force, 2.5kN Holding Force - Kukamet
Benefit from the combination of a galvanised construction, a massive holding arm and a high 2,300 N closing force to keep fixtures secure and repeatable in daily production. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 113 Horizontal toggle clamp by Kukamet — 2,300 N closing force, 90° angle The 113 horizontal toggle clamp is a right‑angle lever clamp designed for fixture and jig applications where secure, repeatable clamping at a 90° orientation is required Robust galvanised steel construction Massive holding arm for secure clamping 2,300 N closing force, 2,500 N holding force 90° angle base for right-angle fixtures Dependable force for repetitive fixture tasks The toggle clamp delivers a controlled 2,300 N closing force with a maximum holding force of 2,500 N, making it suitable for repetitive production sequences where consistent pressure is essential. The combination of a massive holding arm and a lever mechanism ensures minimal loss of clamping power over repeated cycles, which reduces rework and machine downtime. Specified values give planners a verifiable basis for fixture design and enable comparison with alternative clamping elements. Space-saving, corrosion-resistant construction for workshop use A galvanised finish and a compact footprint make the component suitable for busy benches and jig assemblies where corrosion resistance and mounting flexibility matter. The angle foot mounting permits right-angle attachment to fixture plates, while the comparatively light 0.432 kg mass simplifies integration without a heavy load on the substructure. The 158 mm reach of the arm provides practical clearance for common workpiece sizes while keeping the overall profile compact. Fast action and repeatability that save setup time The lever clamp mechanism offers rapid operation and reliable repeatability during batch operations and manual assembly steps. Quick clamp/unclamp sequences speed up cycle times on assembly lines and simplify changeovers in modular fixture systems. The sturdy design and precise kinematics contribute to predictable clamping behaviour, which supports consistent quality in downstream processes and reduces inspection effort. For application advice or to request supply of the Kukamet 113 horizontal toggle clamp, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide pragmatic guidance for fixture integration and procurement. Technical data Article number: 113-3-D-C3 GTIN: 8680731500851 Manufacturer: Kukamet Core specifications Closing force: 2,300 N Maximum holding force: 2,500 N Arm length: 158 mm Angle: 90° Weight: 0.432 kg Construction & features Material: galvanised steel Mounting: angle foot Massive holding arm Lever clamp design FAQ What clamping forces does this clamp provide? The Kukamet 113 horizontal toggle clamp offers a closing force of 2,300 N and a maximum holding force of 2,500 N, values suitable for repeatable fixture tasks. Can the clamp be mounted at right angles to a fixture plate? Yes — the clamp features an angle foot mounting that secures the device at a 90° orientation for right‑angle jigs and assembly fixtures. Is the surface finish corrosion resistant? The component is supplied with a galvanised finish, providing basic corrosion protection appropriate for workshop and assembly environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 166mm Massive Arm, 1,000N Push Force / 1,200N Hold Force, Blackened - Kukamet
Robust clamping for dependable jigs and fixtures: benefit from the massive holding arm, a 1,200 N maximum holding capacity and a compact 166 mm reach for repeatable cycle times. Order the clamp directly via Metav Werkzeuge or consult our specialists for compatibility and mounting options. 111 horizontal toggle clamp by Kukamet — massive arm, 90° lever A 111 horizontal toggle clamp designed for secure, repeatable workholding in jigs, fixtures and assembly stations Massive holding arm for stable clamping Horizontal foot mounting for fixture plates 166 mm arm length for extended reach Max holding force 1,200 N for secure workholding Consistent force where it matters The clamp delivers a reliable holding force of 1,200 N, which ensures components remain stationary during machining, assembly and inspection. The difference between pressing force and holding capacity is designed into the mechanism: a 1,000 N pressing capability secures the workpiece while the toggle action locks the position, reducing the risk of slip. This mechanical advantage makes the device suitable for medium-duty production tasks where reproducible clamping pressure and quick release are required. The compact weight and size support tight fixture layouts without sacrificing clamping performance. Simple mounting and repeatable operation Fitted with a horizontal foot mounting, the clamp installs directly to fixture plates and baseplates for a low-profile solution. The 166 mm arm provides extended reach while the 90° lever travel offers intuitive operation in confined spaces. The component's blackened finish gives corrosion resistance and a professional appearance, and the massive holding arm increases rigidity under load. At just 0.254 kg, the unit is lightweight enough to be integrated across multiple stations while providing stable, repeatable clamping cycles that reduce set-up time and improve throughput. Practical benefits for workshop and production use The lever mechanism is optimised for frequent actuation: the toggle design enables quick locking and unlocking with minimal operator effort, supporting higher takt times and reducing fatigue on the shop floor. The combination of robust construction and a compact footprint suits both manual jigs and automated fixtures where space is limited. Supplied by a recognised manufacturer, the device supports consistent quality control and simplifies fixture design choices by delivering predictable clamping performance across batches. For mounting advice, compatibility checks or to secure dependable supply of Kukamet horizontal toggle clamps, contact Metav Werkzeuge GmbH by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: B111-2-D-C3 GTIN: 8680731506976 ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 166 mm Angle: 90° Max pressing force: 1,000 N Max holding force: 1,200 N Weight: 0.254 kg Special features Material/finish: blackened finish Mounting: horizontal foot Massive holding arm Clamp type: horizontal toggle / lever clamp Manufacturer: Kukamet FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 1,200 N, delivering secure fixation for medium-duty applications. Which mounting method is required for installation? The unit is designed for horizontal foot mounting, allowing direct attachment to fixture plates and baseplates. Is the clamp suitable for automated fixtures? Yes, the toggle action and compact design make it suitable for both manual jigs and automated fixture systems where repeatable clamping is required. What is the arm length and lever travel angle? The arm length is 166 mm and the lever operates through a 90° travel for intuitive actuation. Who supplies this clamp and how can it be ordered? This Kukamet horizontal toggle clamp (SKU B111-2-D-C3) is available via Metav Werkzeuge; contact details are provided above for enquiries and ordering. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 179mm Arm, 4.5kN Closing Force, 5kN Holding Force, Massive Arm & Safety Lock - Kukamet
Benefit from a compact, high‑force clamping solution that combines a 179 mm hold arm with up to 5,000 N holding force and a robust safety latch for consistent, repeatable positioning. The durable blackened finish and horizontal foot mounting minimise setup changes and extend service intervals. Order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 111 — Kukamet horizontal lever clamp with 179 mm arm and 5,000 N holding force A robust horizontal lever clamp, the Horizontal clamp 111 secures workpieces at a 90° angle with a massive holding arm and integrated safety latch for workshop and production use. Massive holding arm and safety latch Holding force up to 5,000 N 179 mm arm for compact setups Horizontal foot mounting, 90° clamping Consistent clamping for repeatable setups The lever design delivers a reliable holding force that keeps fixtures stable through machining and assembly operations. With a 179 mm arm and a defined 90° clamping angle, the device reduces repositioning and shortens setup times, which supports higher process throughput. The combination of measurable holding and pressing forces ensures predictable behaviour during cycles, making the clamp suited to jigs and fixture applications where repeatability matters. Built for safety and durable workshop service A massive holding arm and a mechanical safety latch prevent unintended release under load, increasing operational safety and reducing downtime from clamp failures. The blackened finish offers corrosion resistance appropriate for industrial environments while maintaining a professional workshop appearance. At approximately 1.4 kg mass, the component provides solidity without adding unnecessary bulk to fixtures, supporting long life with minimal maintenance. Straightforward integration into fixtures and benches The clamp’s horizontal foot mounting facilitates direct attachment to fixture plates and workbenches, simplifying retrofits and new setups. As a horizontal lever clamp it fits compact arrangements and works well where vertical space is limited. The clear mechanical function of the device allows planners and operators to estimate clamping performance quickly, enabling efficient layout decisions and reduced fixture complexity. Contact Metav Werkzeuge to discuss integrating the Kukamet horizontal clamp 111 into existing fixtures or to request a tailored supply recommendation from our specialists. Technical Data SKU: B111-5-D-L-C2 Brand: Kukamet ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 179 mm Holding force (max): 5,000 N Pressing force (max): 4,500 N Weight: 1.4 kg Clamping angle: 90° Special features Massive holding arm and safety latch Horizontal foot mounting Blackened finish Mounting type: horizontal foot FAQ What holding force does the clamp provide? The Kukamet horizontal clamp 111 provides a holding force of up to 5,000 N, with a separate pressing force rating of 4,500 N for actuation. How is the clamp mounted to fixtures? Mounting is via the horizontal foot; the clamp is designed for direct attachment to fixture plates and benches, enabling compact, 90° clamping arrangements. Is the clamp suitable for continuous workshop use? Yes. The massive hold arm, safety latch and blackened finish ensure durability for regular workshop and light production use; the device’s mass and mechanical design support stable operation with low maintenance. What are the main dimensional and weight characteristics? Key dimensions include a 179 mm arm length and a defined 90° clamping angle. The unit weighs approximately 1.4 kg. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 179mm Arm, 5 000N Hold Force, 4 500N Closing Force, Zinc-Plated, Massive Arm & Safety Lock - Kukamet
Take advantage of a robust clamping solution that combines a galvanised finish, a massive holding arm and a secure locking mechanism to maintain production reliability; the compact design and 5,000 N holding force ensure consistent results in jigs and fixtures. Order the horizontal toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. 111 Horizontal toggle clamp by Kukamet — galvanised, 5,000 N holding force The 111 horizontal toggle clamp is a heavy-duty horizontal clamp designed for jig and fixture applications, offering a 90° clamping angle and secure locking for repetitive production tasks. Massive holding arm for enhanced stability Safety locking mechanism for secure clamping Galvanised finish for corrosion resistance 5,000 N maximum holding force Reliable clamping for production and jigs This horizontal clamp delivers repeatable clamping with a measured holding force of 5,000 N and a clamping force of 4,500 N, making it suitable where consistent workpiece positioning is essential. The 179 mm lever length balances reach and leverage, enabling firm contact without excessive handle travel. By converting high mechanical input into stable holding performance, the device reduces rework and downtime, supporting efficient process chains and higher throughput in small-batch and serial production alike. Safety and durability built in for everyday workshop use A safety locking mechanism prevents accidental release during handling, while the massive holding arm minimises deformation under load, improving long-term stability. The galvanised surface finish offers enhanced resistance to corrosion in standard workshop environments, so fixtures retain alignment and service intervals are extended. These characteristics combine to protect both components and personnel, fostering a reliable working environment and reducing unplanned maintenance. Compact integration into fixtures and easy assembly With a horizontal base mounting and a compact mass of 1.4 kg, the clamp integrates cleanly into bespoke jigs and modular tooling systems without adding excessive bulk. The 90° clamp angle suits a wide range of machining, welding and assembly operations, while the lever geometry simplifies manual operation. The lightweight yet sturdy construction supports frequent repositioning on fixtures and ensures compatibility with common clamping patterns in production setups. Contact Metav Werkzeuge for tailored advice on specifying the Kukamet 111 horizontal toggle clamp, or request a technical data sheet and mounting recommendations via phone or email. Technical Data Article number: 111-5-D-L-C2 GTIN: 8680731500356 SKU: 111-5-D-L-C2 EClass: 21041719 ETIM: EC011973 Facts Weight: 1.4 kg Arm length: 179 mm Clamp angle: 90° Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Special features Mounting: horizontal base Material: galvanised Massive holding arm Safety locking mechanism Category: Clamps (Spanner) FAQ What holding and clamping forces does this clamp provide? The Kukamet 111 horizontal toggle clamp provides a maximum holding force of 5,000 N and a clamping force of 4,500 N for secure positioning in fixtures. Is the clamp suitable for use in humid or spray-prone environments? The galvanised finish on the Kukamet 111 offers improved corrosion resistance for standard workshop and light industrial environments; for continuous outdoor exposure, additional protection is recommended. How is the clamp mounted to a fixture? Mounting is via a horizontal base designed for secure attachment to jigs and fixture plates; the clamp’s compact footprint simplifies integration. What are the main dimensions and weight to consider for fixture design? Relevant values for the 111 are a 179 mm lever arm, a 90° clamp angle and a mass of 1.4 kg, which aid planning for reach and balance in tooling layouts. Does the clamp include a safety feature to prevent accidental release? Yes, the clamp is equipped with a safety locking mechanism and a robust holding arm to prevent unintended opening during handling or machining. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 217mm Massive Arm 5,000N Holding Force, Blackened Finish - Kukamet
Robust workshop fixturing is delivered by a heavy-duty holding arm paired with up to 5,000 N of holding force and a 217 mm reach for secure positioning. With a compact mass of 1.906 kg and an angled base for 90° mounting, the clamp supports consistent cycle times and safe part retention. Order directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontalspanner 113 (B113-5-D-C3) — Kukamet horizontal lever clamp, 5,000 N holding force The Horizontalspanner 113 is a compact horizontal lever clamp designed for industrial workholding and fixture applications, providing secure part retention and straightforward integration into assembly jigs. Massive holding arm, heavy-duty construction 5,000 N maximum holding force 217 mm reach for larger workpieces Angled base (Winkelfuß) for 90° positioning Secure clamping for uninterrupted production The clamp delivers a high, defined holding force that keeps components immobile during machining or assembly. A rated 5,000 N retention capability, combined with a closing pressure of 4,500 N, ensures that the workpiece remains stable under lateral and axial loads. This performance reduces rework and scrap rates by limiting micro-movement during processing. The robust lever geometry converts operator input into consistent clamping, which is especially useful where repeatable fixture performance is required. Flexible mounting and extended reach for varied parts The angled base offers a reliable method to mount the clamp at 90°, enabling direct fixation to vertical or horizontal plates without additional adapters. The 217 mm arm reach permits clamping of larger or awkwardly shaped workpieces while keeping the main body clear of obstructing tooling. The design suits both batch production and single-station jigs, allowing easy integration into existing fixture plates and modular tooling systems. The combination of reach and compact footprint supports versatile fixture layouts. Durable finish and construction for workshop environments A blackened finish (Schwarz brüniert) protects metal surfaces against corrosion and wear in typical workshop conditions, improving lifetime and appearance. The massive holding arm is engineered to resist bending and vibration, sustaining clamp accuracy over extended use. At 1.906 kg, the device balances rigidity with manageable weight for fixture assembly. These material choices contribute to predictable behaviour and reduced maintenance intervals in everyday industrial use. Practical handling and technical clarity for purchasing teams The clamp’s clear technical ratings simplify selection and risk assessment for procurement and engineering: measurable holding and clamping forces, defined reach and a standardised mounting style reduce uncertainty during machine integration. The compact construction supports quick installation and repeatable positioning in production cells. Where higher volumes or specialised setups are planned, the documented force values and mounting type enable accurate fixture design and finite-element checks if required. Contact Metav Werkzeuge today to specify Kukamet’s Horizontalspanner 113 (SKU B113-5-D-C3) for your fixture project; our Emmerich-based consultants will advise on mounting options and delivery to fit production schedules. Technical data Article number: B113-5-D-C3 GTIN: 8680731507577 eClass: 21041719 ETIM: EC011973 Facts Holding force max: 5,000 N Clamping/closing force: 4,500 N Arm length: 217 mm Angle: 90° Weight: 1.906 kg Special features Material/finish: blackened finish (Schwarz brüniert) Massive holding arm Mounting type: angled base (Winkelfuß) Robust lever clamp design SKU: B113-5-D-C3 FAQ What holding capacity does this clamp provide? The Horizontalspanner 113 (Kukamet horizontal lever clamp, SKU B113-5-D-C3) is rated for a maximum holding force of 5,000 N with a closing force of 4,500 N, offering secure retention for many workshop applications. How is the clamp mounted in a fixture? Mounting is via an angled base (Winkelfuß) designed for 90° positioning, allowing direct attachment to fixture plates or modular tooling systems without special adapters. Which materials and environments suit this clamp? The clamp’s blackened finish offers corrosion resistance suitable for standard workshop environments; the heavy-duty arm and solid construction are intended for metalworking and assembly fixtures. What is the effective reach of the clamp arm? The arm provides a 217 mm reach, enabling clamping of larger or irregularly shaped parts while keeping the body clear of adjacent tooling. Is the clamp heavy to handle during fixture setup? At 1.906 kg, the clamp balances rigidity with manageable weight for manual fixture assembly and positioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 3.5 kN Clamping Force, M10x70 Spindle, Blackened - Kukamet
Take advantage of a compact, robust clamping solution with a 3,650 N holding force, a 90° locking angle and an angle-foot mount for secure fixture attachment; order the horizontal clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Horizontal Clamp 113 — 3,650 N holding force, 90° angle foot mount Horizontal Clamp 113 is a lever-operated horizontal clamping device designed for fixed jigs and fixtures in workshop and light industrial settings, offering reliable holding and compact installation where repeatable clamping is required Blackened finish for corrosion resistance 3,650 N maximum holding force 90° locking angle for secure positioning Angle-foot mounting for stable fixture attachment Reliable clamping for repetitive production The lever-operated horizontal clamp delivers consistent performance across batch and single-piece production. With a maximum holding force of 3,650 N, the device provides secure workpiece retention that reduces slippage during machining and assembly operations. The lever mechanism converts operator input into repeatable clamping, which supports shorter cycle times and fewer adjustments on the jig. Where process stability and throughput matter, this compact clamping solution contributes to predictable results and fewer rejects. Compact design that supports fast installation Engineered for confined jigs, the clamp’s angle-foot mounting permits straightforward attachment to fixture plates and tooling blocks without additional adapter components. The integrated spindle (M10x70) enables precise adjustment of clamping travel and contact pressure, while the blackened finish offers enhanced surface protection in workshop environments. At approximately 0.94 kg, the unit combines low weight with robust construction, making it suitable for portable fixtures or where multiple clamps are required without overloading the assembly. Practical benefits for workshop and small-scale production Installation at a 90° locking angle simplifies positioning and ensures the clamp holds the workpiece down and across the intended datum line, improving repeatability in downstream processes. The clamp’s rated pressing force (3,500 N) and holding force are clearly specified, enabling engineers to assess suitability against material characteristics and machining forces. The mechanism is particularly useful in fixture plates, assembly jigs and testing rigs where a compact, dependable lever clamp helps cut set-up times and supports consistent part quality. For procurement or technical questions regarding the Kukamet Horizontal Clamp 113, contact Metav Werkzeuge for tailored advice and ordering information via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: B113-4 GTIN: 8682843522226 Manufacturer: Kukamet Facts Weight: 0.94 kg Maximum holding force: 3,650 N Maximum pressing force: 3,500 N Locking angle: 90° Spindle: M10x70 eClass: 21041719 ETIM: EC011973 Special features Mounting type: Angle foot Surface: Blackened finish Product type: Horizontal lever clamp Intended use: Fixture and jig clamping FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal Clamp 113 provides a maximum holding force of 3,650 N as specified for fixture retention. Can the clamp be adjusted for different workpiece heights? Yes, the clamp features an M10x70 spindle that allows adjustment of the clamping point to accommodate varying workpiece heights. Is the clamp suitable for heavy-duty machining fixtures? The clamp is designed for robust holding in workshop fixtures; assess the specified holding and pressing forces against the machining loads to confirm suitability for heavy-duty operations. What mounting options are available for this model? This variant comes with an angle-foot mounting for direct attachment to fixture plates and tooling blocks. Which surface protection does the clamp have? The device is supplied with a blackened finish that improves resistance to corrosion and wear in typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 43mm Arm Massive Support With Safety Lock, Zinc Coated - Kukamet
Take advantage of the combination of 850 N clamping force, a massive clamping arm and a secure safety lock for dependable fixture holding and uninterrupted production. The galvanised finish and horizontal-foot mount ensure simple integration into jigs and assemblies. Order directly via Metav Werkzeuge or contact our consultants for specification checks. 111 — Horizontal clamp with massive arm and safety lock (Kukamet) The 111 horizontal clamp is a lever-operated holding device for secure workpiece clamping in fixtures, jigs and assembly stations, designed for reliable repetitive use in workshop and light industrial environments. Massive clamping arm for stable fixation Safety locking device for secure retention 850 N clamping force for dependable holding Galvanised finish for corrosion resistance High clamping performance that stabilises production The lever clamp delivers a reliable 850 N clamping force and a holding capacity of 1,000 N, values that translate directly into fewer unclamp cycles and improved setup repeatability. The robust arm construction, described as a massive clamping arm, reduces elastic deformation under load and helps keep workpieces in the correct position during machining or assembly. The integrated safety locking prevents unintended release, lowering the risk of stoppages and rework. For planners and production engineers, these measurable figures provide a clear basis for fixture design decisions and process reliability improvements. Corrosion-resistant finish and compact mounting for long service life Constructed with a galvanised surface treatment, the clamp resists chemical and humidity-related wear common in workshop atmospheres, extending service life and reducing replacement frequency. The horizontal foot mounting and a 43 mm arm length allow compact installation in confined fixture layouts, while the component’s low mass (approx. 0.1 kg) minimises added inertia on moving subassemblies. This combination of materials and dimensions supports a cost-effective, space-saving solution when integrating clamps into pallets, modular fixtures or bespoke jigs. Simple integration, safe operation and supply confidence Designed for easy mechanical attachment and straightforward operation, the lever mechanism operates at a 90° travel angle and is compatible with standard fixture patterns. The secure locking reduces operator error and contributes to a safer workplace routine. Sourcing through an experienced precision partner ensures consistent quality and availability: products pass a quality filter intended for durable workshop use, supporting reliable procurement and inventory planning. For engineering teams seeking predictable performance in repetitive tasks, this clamp provides a practical balance of durability, ease of installation and measurable holding power. Contact Metav Werkzeuge for technical matching and supply: call +49 2822 7131930 or eMail info@metav-werkzeuge.com to confirm suitability and place orders through our Emmerich distribution. Technical data SKU: 111-1-D-L-C1 GTIN: 8680731505269 Manufacturer: Kukamet Facts Max clamping force: 850 N Max holding force: 1,000 N Arm length: 43 mm Angle: 90° Weight: 0.1 kg eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Massive clamping arm Safety locking device FAQ What clamping and holding forces does this clamp provide? The 111 horizontal clamp offers a maximum clamping force of 850 N and a holding capacity of 1,000 N, providing dependable retention for fixture applications. Is the clamp suitable for humid or corrosive workshop conditions? Yes, the galvanised finish on the Kukamet horizontal clamp improves corrosion resistance and is intended to extend service life in typical workshop environments. How is the clamp mounted in fixtures? The device is designed for a horizontal-foot mount and a compact footprint, enabling straightforward attachment in pallets, jigs and modular fixture systems. Does the clamp include a safety lock to prevent accidental release? A safety locking device is integrated into the lever clamp to secure the arm in the engaged position and reduce the risk of unintended unclamping. What are the physical dimensions relevant for integration? Key dimensions include a 43 mm arm length, a 90° lever travel angle and an overall mass of approximately 0.1 kg, suitable for tight fixture layouts and light assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 43mm Arm, 850N Thrust 1000N Holding Force, Zinc Plated, Locking Lever - Kukamet
Robust zinc-plated construction, a massive holding arm and a safety locking mechanism ensure secure clamping at a 90° angle; with an 850 N clamping force and 1,000 N holding capacity the device keeps fixtures stable during machining. Order the clamp directly from Metav Werkzeuge or consult the team for application advice. Horizontal clamp 112 — zinc-plated, 850 N clamping force (Kukamet) The Horizontal clamp 112 is a lever-operated horizontal clamp with vertical-foot mounting, designed for secure workholding at a 90° angle in general workshop and light industrial fixtures. Solid holding arm with safety lock Zinc-plated finish for corrosion resistance Vertical-foot mounting for fixture attachment 850 N clamping force, 1,000 N holding capacity Reliable clamping for stable machining The toggle-style mechanism delivers a dependable 850 N clamping force, while the specified 1,000 N holding capacity represents the maximum resistance against unintended part movement. Clamping force indicates the nominal pressure applied by the spindle, whereas holding capacity reflects the static resistance under load; together these values give a clear indication of process stability. This level of performance reduces rework and downtime when used for light-to-medium assembly and machining tasks, ensuring components remain fixed during cutting, drilling or inspection. Flexible mounting and compact integration Designed with a vertical-foot mounting and a compact 43 mm arm, the unit integrates easily into bespoke fixtures and jigs where a 90° clamping direction is required. The vertical foot permits rigid attachment to a base plate or fixture block, allowing the clamp to sit flush and save space on the workbench. At only 0.1 kg, the device is lightweight enough for modular fixturing yet robust in operation thanks to the solid holding arm, making it suitable for repetitive production processes and quick fixture changes. Durable finish and safety-oriented design A zinc-plated coating protects the steel construction from corrosion in workshop environments, extending service life and reducing maintenance intervals. The safety locking mechanism prevents accidental release under vibration or handling, increasing operator confidence during set-up. The lever-operated design offers quick actuation and tactile feedback, combining operational speed with a reliable mechanical lock for repeated cycles. For application guidance and to purchase the Kukamet Horizontal clamp 112, contact Metav Werkzeuge in Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored fixture advice and prompt processing. Technical data Article number: 112-1-D-L-C1 GTIN: 8680731501384 Brand: Kukamet eClass: 21041719 ETIM: EC011973 Core specifications Clamping force: 850 N Holding capacity: 1,000 N Arm length: 43 mm Angle: 90° Weight: 0.1 kg Materials & special features Zinc-plated steel Vertical-foot mounting Solid holding arm Safety locking mechanism SKU: 112-1-D-L-C1 FAQ What clamping and holding forces does the clamp provide? The Horizontal clamp 112 specifies an 850 N clamping force and a 1,000 N holding capacity, values that indicate both applied pressure and the maximum static resistance under load. How is the clamp mounted in a fixture? The device features a vertical-foot mounting that allows rigid attachment to a base plate or fixture block; the design suits integration into bespoke jigs where space is constrained. Is the surface finish suitable for workshop environments? Yes, the zinc-plated finish on the Horizontal clamp 112 protects the steel body from corrosion and reduces the need for frequent maintenance. Does the clamp include a safety feature to prevent accidental release? A mechanical safety locking mechanism is incorporated to prevent unintended opening under vibration or handling, improving process safety. What are the typical applications for this type of clamp? This lever-operated horizontal clamp is intended for general workholding in assembly, drilling and light machining operations where reliable 90° clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 43mm Arm, Solid Holding Arm, 1,000 N Hold Force, 850 N Thrust - Kukamet
Take advantage of a massive holding arm, compact footprint and clear force ratings to secure workpieces reliably in repeat production; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 111 Horizontal clamp — horizontal foot mounting, 1,000 N holding force (Kukamet) A 111 horizontal clamp designed for secure lateral workholding in jigs and fixtures, featuring a robust holding arm and clearly specified force values for controlled clamping. Massive holding arm Max holding force 1,000 N Max pressing force 850 N Horizontal mounting foot, 90° angle Secure clamping for repeatable production The combination of a massive holding arm and a rated holding force of 1,000 N delivers consistent workpiece retention across repeated cycles. Specified force values remove uncertainty during fixture design: the difference between the pressing force (850 N) and the holding force allows planners to assess both actuation load and static retention separately. For production environments this means reduced rework, fewer fixture adjustments and predictable process stability when the clamp is integrated into a repeat operation or a jig. Compact, lightweight design that simplifies setup With a short arm of 43 mm and a nominal mass of 0.108 kg, the clamp keeps additional mass on assemblies to a minimum while providing a solid contact surface. The horizontal mounting foot and fixed 90° angle are suited to confined fixtures where lateral restraint is required without complex sub‑structures. The blackened finish gives the component a uniform industrial appearance and allows straightforward alignment in modular clamping systems, easing both installation and interchangeability within existing tooling. Clear actuation and versatile fixture integration A horizontal foot and lever geometry ensure reproducible actuation in standard jig arrangements; the clamp’s pressing and holding ratings enable correct actuator selection and safe margin calculation. Specification of the clamp’s pressing force and holding force supports rational decision‑making when choosing pneumatic or manual actuation. The unit’s compact profile and robust arm make it suitable for workholding tasks where secure lateral restraint is essential, such as machining fixtures, assembly jigs and inspection stations. Discuss compatibility with Metav Werkzeuge to confirm the Kukamet clamp fits the intended fixture and to arrange supply from our Emmerich distribution centre Technical Data Article number: B111-1-D-C1 GTIN: 8682843522141 Manufacturer: Kukamet Material finish: Blackened finish Core specifications Arm length: 43 mm Angle: 90° Max holding force: 1,000 N Max pressing force: 850 N Weight: 0.108 kg Special features Massive holding arm Horizontal mounting foot Compact, lightweight construction Suitable for jig and fixture integration FAQ What clamping and pressing forces are specified for this clamp? The 111 horizontal clamp specifies a maximum holding force of 1,000 N and a pressing force of 850 N, allowing clear calculation of retention and actuation loads for fixture design. Is the clamp suitable for tight‑space fixtures? Yes, the short 43 mm arm and low weight (0.108 kg) make the clamp appropriate for confined jigs and modular fixture systems where minimal added mass is required. How is the clamp mounted and oriented? The clamp uses a horizontal mounting foot and provides a fixed 90° angle, making it straightforward to integrate into lateral workholding arrangements. What does the blackened finish indicate for use in production? The component is supplied with a blackened finish which provides a consistent industrial surface appearance suitable for workshop and production environments. Which applications match the clamp’s design? The unit is intended for lateral workholding in jigs, fixtures, assembly stations and inspection setups where secure, repeatable restraint is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 450 N Clamping Force, Metal Handle, Blackened Finish - Kukamet
Take advantage of the compact design, 520 N holding force and 450 N clamping force for secure, repeatable workholding in light fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Horizontal clamp 111 by Kukamet — 520 N holding force, metal handle A robust horizontal clamp 111 for light-duty fixtures and jigs, designed to deliver reliable positioning and rapid locking in confined spaces. Horizontal mounting foot Metal handle for long service life 520 N max holding force Compact 0.042 kg body Stable fixing for precise, repeatable setups The lever-style clamp provides a holding force of 520 N and a clamping force of 450 N, which together ensure secure retention of small components during assembly and light machining. The short spindle with its M4x25 specification allows precise adjustment and consistent torque transmission, reducing rework and downtime. This performance is particularly valuable where repeatability matters and every second on the production line counts. Durable finish and compact integration With a blackened finish and a metal handle, the device resists surface wear and offers a tactile, dependable actuation under frequent use. The horizontal mounting foot and a 90° configuration enable space-saving placement on fixtures and plates, while the unit’s compact design (approx. 0.042 kg) minimises added mass on delicate jigs. These attributes simplify retrofit into existing assemblies and support efficient toolroom workflows. Practical applications and quick handling Engineered for jigs, small clamping plates and light assembly work, the clamp suits environments that demand quick manual locking and reliable retention. Its lever mechanism shortens setup time and the robust handle ensures comfortable operation over repeated cycles. Where small components must be held steadily for inspection or light processing, this clamp delivers a balance of stiffness and user-friendly handling that supports consistent throughput. Choose the Kukamet 111 horizontal clamp for compact, reliable workholding — contact Metav Werkzeuge for stock information and tailored assembly guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical details SKU: B111-0-M GTIN: 8680731506907 Manufacturer: Kukamet Core technical data Holding force: 520 N Clamping force: 450 N Weight: 0.042 kg Angle: 90° Spindle: M4x25 Special features Mounting: horizontal foot Handle: metal Finish: blackened Category: Spanner eClass: 21041719 ETIM: EC011973 FAQ What is the difference between holding force and clamping force? The holding force indicates the maximum retention the clamp can maintain under load, while the clamping force describes the applied downward or lateral force when the lever is engaged; the Kukamet 111 combines both to keep small workpieces secure. How is the clamp mounted? The unit is designed for a horizontal mounting foot arrangement and is fastened directly to fixture plates or jigs for rigid attachment. What is the spindle specification? The clamp uses an M4x25 spindle, which defines the thread size and travel for adjustment. Is the finish suitable for workshop use? The blackened finish provides basic surface protection against wear and is suitable for general workshop environments. Which applications are recommended for this clamp? Best suited to jigs, small assembly fixtures and light machining operations where compact, repeatable clamping is required; the Kukamet 111 is intended for quick manual locking and frequent operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 450 N Thrust, Metal Handle, Stainless Steel, Wafer Base - Kukamet
Take advantage of durable stainless steel construction, a compact 90° locking position and a reliable holding force 520 N for stable fixturing in jigs and fixtures. Order the horizontal toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 111 — Kukamet horizontal toggle clamp, stainless steel, 90° lock The Horizontal clamp 111 is a compact horizontal toggle clamp designed for fixture and jig applications where a secure 90° locking position and corrosion resistance are required Stainless steel construction 90° locking position Holding force 520 N Horizontal foot mounting Secure, repeatable clamping for series production The horizontal toggle clamp delivers a consistent hold, making it suitable for repeated operations in assembly and machining environments. Its robust stainless steel body resists corrosion and mechanical wear, which translates into predictable clamping cycles and reduced downtime for maintenance. By combining a compact profile with a solid locking geometry, this device supports higher throughput and fewer reworks in jigs or small fixture assemblies. Clear performance metrics that simplify integration Performance is expressed in measurable terms for straightforward selection and planning: holding force 520 N and clamping force 450 N indicate the secure retention and compressive capability respectively. The unit features an M4x25 pressure spindle, enabling fine adjustment of contact pressure. These specifications allow engineers and buyers to assess suitability against component mass and process forces without extensive trial-and-error, reducing setup time and ensuring compatibility with downstream operations. Fast mounting and dependable operation on the shop floor The horizontal foot mounting offers simple installation onto flat fixture plates or tooling blocks, and the 90° locking position establishes an unmistakable engaged state for operators. The metal handle provides tactile feedback and long service life under frequent actuation. Lightweight and compact, the clamp minimises additional mass on moving fixtures while maintaining secure contact, which supports faster cycle times and ergonomic handling during manual or semi-automated workflows. Practical fit for workshops and production lines Designed for use in industry, craft workshops and toolrooms, the clamp is particularly well suited to jigs, assembly stations and small fixtures where corrosion resistance and repeatability matter. Procurement and maintenance benefit from standardised threads and a straightforward mechanical design that technicians can inspect and replace with common tooling. For businesses seeking reliable fixturing components, the combination of stainless construction and quantified clamping values supports long-term process stability. For procurement advice or to secure delivery from our Emmerich warehouse, request the Kukamet horizontal toggle clamp 111 via Metav Werkzeuge — our consultants will advise on integration and lead times Technical data SKU: S111-0-M GTIN: 8680731508871 Manufacturer: Kukamet Weight: 0.042 kg Holding force (max): 520 N Clamping/pressing force (max): 450 N Angle: 90° Pressure spindle: M4x25 eClass: 21041719 ETIM: EC011973 Material: stainless steel Mounting: horizontal foot Handle: metal Product type: horizontal toggle clamp Category: clamps FAQ What is the primary use for this horizontal clamp? The horizontal clamp 111 from Kukamet is intended for securing workpieces in fixtures, jigs and small assembly stations where a 90° locking position and repeatable clamping are required. Can the clamp be adjusted to change contact pressure? Yes. The clamp uses an M4x25 pressure spindle for fine adjustment of the contact pressure to match different workpiece thicknesses and surface conditions. Is the clamp suitable for corrosive environments? The clamp’s stainless steel construction provides enhanced corrosion resistance, making it appropriate for environments where moisture or common workshop contaminants are present. What mounting method is required for installation? A horizontal foot mounting is provided for attachment to flat fixture plates or tooling surfaces; standard machine screws compatible with the mounting holes can be used. Which forces should be considered when selecting this clamp? Consider the holding force 520 N and clamping force 450 N as primary selection criteria; these values describe retention capability and compressive load capacity for stable fixturing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 60mm Arm, Massive Arm With Safety Lock, 1,000N Press Force - Kukamet
Secure, compact clamping performance with a 60 mm arm and a safety locking mechanism for consistent holding; the galvanised finish provides corrosion resistance while the 1,200 N holding force keeps fixtures steady. Order the Horizontal clamp 113 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 113 — galvanised lever clamp with 60 mm arm and safety lock The Horizontal clamp 113 is a compact lever clamp designed for secure workpiece fixation at 90° in assembly and jigging applications, combining a solid holding arm with a dedicated safety locking mechanism. Robust 60 mm holding arm Safety locking mechanism included Galvanised steel for corrosion resistance Clamping force up to 1,200 N Reliable holding power for repeatable processes The clamp provides a clear technical benefit through its combination of 1,000 N clamping force and 1,200 N holding force, delivering reliable fixation for repetitive tasks and short-cycle production. The solid holding arm supports stable pressure transfer, reducing part movement during processing and inspection. This translates into fewer reworks and improved throughput when used in fixtures, jigs or small assembly stations, with the numerical values offering an objective basis for process planning. Simple integration and secure handling on the shop floor Fitted with an angle foot for straightforward mounting, the device permits quick incorporation into existing fixtures and tooling plates at a fixed 90° orientation. The lever-style actuation and safety lock reduce the risk of accidental release while enabling rapid clamping and release cycles, which supports ergonomic handling and operator confidence. Compact dimensions and a lightweight design keep the installation footprint minimal without compromising functional robustness. Durable finish and suitability for industrial environments Constructed from galvanised steel and weighing just 0.27 kg, the clamp balances corrosion resistance with easy handling during assembly and maintenance. The combination of a massive holding arm and secure locking mechanism ensures longevity under frequent use, while the compact form factor makes it suitable for confined setups and portable jigs. Clear technical specifications and mechanical simplicity make this clamp a pragmatic choice for workshops seeking dependable, low-maintenance clamping solutions. Specify Kukamet’s Horizontal clamp 113 with its 60 mm arm and safety lock via Metav Werkzeuge for professional-grade clamping; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and delivery from Emmerich Technical data Article number: 113-2-D-L-C1 GTIN: 8680731500783 SKU: 113-2-D-L-C1 Facts Arm length: 60 mm Angle: 90° Clamping force: 1,000 N Holding force: 1,200 N Weight: 0.27 kg Special features Material: galvanised steel Mounting: angle foot Safety locking mechanism Massive holding arm Category: clamp FAQ What clamping and holding forces does the clamp provide? The Kukamet Horizontal clamp 113 offers a clamping force of 1,000 N and a holding force of 1,200 N, values that support secure fixation in repetitive assembly and jigging tasks. How is the clamp mounted? Mounting is via an angle foot, allowing secure attachment at a 90° orientation for straightforward integration into fixtures and tooling plates. Is the clamp suitable for corrosive or humid environments? The galvanised finish on the Horizontal clamp 113 enhances corrosion resistance, making it appropriate for general workshop environments where surface protection is required. Does the clamp include a safety feature to prevent accidental release? Yes, the clamp is equipped with a safety locking mechanism that prevents unintentional opening and improves handling safety during operations. How compact is the clamp for use in confined fixtures? Weighing 0.27 kg with a 60 mm arm, the clamp is compact and lightweight, designed for minimal footprint in confined jigs and small assembly setups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 66mm Massive Holding Arm, 1,200N Hold Force, Blackened Finish - Kukamet
A compact, robust clamp that combines a massive holding arm with a vertical-foot attachment for secure, repeatable single-point workholding; offering up to 1,200 N static holding capacity and a responsive 1,000 N actuation force for reliable fixture performance. Order the clamp directly via Metav Werkzeuge or consult our technical team for integration advice. Horizontal clamp 112 by Kukamet — vertical-foot mounting, 66 mm arm A Horizontal clamp 112 built for light-duty jigs and fixtures, providing a rigid lever action and a short reach suited to compact workstations. Massive holding arm Vertical-foot mounting 66 mm arm length Max holding force 1,200 N Precision clamping that raises throughput The clamp delivers a clear productivity advantage through its combination of compact geometry and robust load capacity. With a holding force rated at 1,200 N and an actuation (pressing) capacity of 1,000 N, the device stabilises small components during machining, assembly or inspection. The differentiation between actuation and holding is important: the actuation force is the mechanical input applied via the lever, while the holding force denotes the maximum static load the clamp will sustain once engaged. This distinction supports predictable cycle times and reduces rework caused by part movement. Space-saving design and simple fixture integration The short 66 mm arm and vertical-foot mounting allow the clamp to be mounted close to the workpiece, reducing cantilever effects and enabling denser fixture layouts. The massive holding arm increases rigidity where it matters, improving repeatability in operations where small deviations translate to scrap. At a net weight of approximately 0.2 kg, the component adds minimal inertia to moving assemblies and is therefore suitable for both stationary fixtures and rotating jigs where mass must be minimised. Corrosion-resistant finish and low maintenance A blackened (brüniert) finish protects surfaces against light corrosion while providing a subdued appearance that suits professional workshop environments. The surface treatment reduces the need for frequent lubrication and supports consistent contact behaviour over prolonged use. For everyday workshop handling, the combination of durable surface treatment and solid lever mechanics ensures long service intervals and predictable clamping cycles, helping to reduce downtime and maintenance planning. For fast supply and expert advice on integrating this Kukamet clamp into existing fixtures, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss technical requirements and delivery options Technical Data Article number: B112-2-D-C1 GTIN: 8682843522172 eClass: 21041719 ETIM: EC011973 Facts Arm length: 66 mm Angle: 90° Max pressing force: 1,000 N Max holding force: 1,200 N Weight: 0.2 kg Special features Mounting: vertical foot Finish: blackened / brüniert Design: massive holding arm Category: clamp / spanner FAQ What is the difference between pressing force and holding force? The pressing force is the mechanical input applied during clamping; the holding force is the maximum static load the clamp will sustain once engaged. The Horizontal clamp 112 offers 1,000 N actuation and up to 1,200 N holding capacity. Can the clamp be mounted directly to a fixture plate? Yes. The vertical-foot mounting is intended for direct attachment to fixture plates and bases, simplifying integration into modular jigs. Is the surface treatment suitable for humid workshop environments? The blackened (brüniert) finish offers basic corrosion resistance and reduced maintenance compared with untreated steel; for aggressive environments additional protection is recommended. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
90° Horizontal Clamp 68mm Arm Zinc Plated Heavy-Duty Three-Point Locking, 2.5kN Hold - Kukamet
Take advantage of a galvanised construction combined with a massive holding arm and integrated safety lock for secure, repeatable clamping in production and assembly. The compact design delivers up to 2,500 N holding force while remaining lightweight for easy fixture integration. Order directly via Metav Werkzeuge or consult our specialists for application guidance. Horizontalspanner 111 — Horizontal clamp with massive holding arm and safety lock (Kukamet) A Horizontalspanner 111 is a horizontal toggle clamp engineered to secure workpieces at a 90° orientation within jigs, fixtures and assembly stations. Galvanised steel construction Massive holding arm and safety lock Holding force up to 2,500 N Horizontal base mounting, 68 mm arm Dependable clamping that improves repeatability A compact clamp delivering consistent force reduces setup variation across production runs. The unit provides a rated holding force of 2,500 N and a maximum pressing force of 2,300 N, ensuring reliable retention for a wide range of light to medium-duty operations. This force rating translates into fewer re-clamps and less part movement during machining or assembly, which improves overall process stability and lowers scrap rates. The clear, measurable values support planning for fixture design and process control. Built for workshop durability and safety Constructed from galvanised steel, the clamp resists corrosion in typical workshop environments while remaining low-maintenance. The massive holding arm improves load distribution and reduces wear at contact points, and the integrated safety lock prevents accidental release during handling or vibration-prone processes. These features combine to prolong service life and reduce downtime for replacements or repairs, delivering tangible savings over multiple production cycles. Quick to integrate into jigs and fixtures Designed for horizontal base mounting at a 90° clamping angle and a 68 mm lever arm, the clamp fits compact layouts and standard fixture plates. Its lightweight character (approx. 0.3 kg) simplifies handling during installation and positioning, while the standard mounting arrangement allows straightforward retrofitting into existing tooling. This ease of integration shortens fixture setup time and supports flexible manufacturing layouts where fast changeovers matter. Practical applications and operational advantages The clamp is suitable for repeated securing tasks in assembly, inspection and light machining fixtures where predictable retention is required. Its robust arm and locking mechanism are particularly helpful where consistent pressure and accidental release prevention are priorities. By converting technical specifications into operational benefits—stable clamping, reduced rework and simplified fixture mounting—the clamp supports more efficient workflows on the shop floor. Contact Metav Werkzeuge for detailed application advice and to request a tailored quote for the Kukamet Horizontalspanner 111 to ensure the right clamp solution for your fixtures Technical data SKU: 111-3-D-L-C1 GTIN: 8680731500172 Eclass: 21041719 ETIM: EC011973 Core data Weight: 0.3 kg Arm length: 68 mm Angle: 90° Holding force: 2,500 N Clamping/pressing force: 2,300 N Special features Material: galvanised steel Mounting: horizontal base Massive holding arm Safety lock integrated FAQ What holding force does the clamp provide? The clamp delivers a holding force of up to 2,500 N; the rated pressing force is 2,300 N, which makes it suitable for many light to medium-duty clamping tasks. How is the clamp mounted in fixtures? Mounting is via a horizontal base; the design includes a 68 mm lever arm and a 90° clamping angle for straightforward integration into jigs and fixture plates. Is the clamp suitable for harsh workshop environments? Yes. The galvanised finish offers corrosion protection appropriate for standard workshop conditions, and the robust arm with a safety lock adds operational safety. Can the clamp be used for assembly and inspection tasks? Absolutely. The clamp’s consistent retention and safety lock make it well suited to assembly, inspection and light machining fixtures where repeatable clamping is required. Which SKU should be ordered for this model? Order SKU 111-3-D-L-C1 for this Horizontalspanner 111; refer to the GTIN 8680731500172 when specifying the item. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com