Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
110mm Tilting Milling Vice 0.01mm Accuracy, 1200 kgf Clamp Force - Vertex
Combining a cast-iron body with a 1200 kgf clamping force and repeatable accuracy to 0.01 mm, the tilting milling vice delivers steady, vibration-resistant workholding for precision machining. Order the unit directly via Metav Werkzeuge or consult our technical team for specification support. VWT-4B Vertex tilting milling vice — cast-iron, 1200 kgf clamping force The VWT-4B is a tilting milling vice engineered for secure workholding in machine shops and toolrooms, suitable for operations where accurate clamping and angular flexibility are required Robust cast-iron body for stable clamping High clamping force: 1200 kgf Jaw opening 0–220 mm for versatile workpieces Precision repeatability to 0.01 mm Consistent precision for demanding milling tasks The vice combines a cast-iron construction with finely machined guideways to deliver reliable precision on every job. With a repeatability rated at 0.01 mm and a substantial 1200 kgf clamping force, it secures workpieces against chatter and tool deflection, translating machining parameters into predictable results. This level of control benefits setups that require tight tolerances, reducing rework and increasing first-pass yield while maintaining a straightforward rigging process. Flexible angles and efficient part handling Featuring a tilting function and a jaw opening of 0–220 mm, the design allows angled milling and varied part sizes without extensive fixturing changes. The compact footprint (110 x 240 x 230 mm) and moderate mass help to integrate the vice into milling tables and smaller machining centres where space is at a premium. Quick angle adjustments save setup time and support smoother production flow, providing tangible gains in throughput for batch work and one-off prototypes alike. Built to last with predictable uptime Durability is engineered into the vice through material choice and sound mechanics: robust cast-iron mass dampens vibration, while the construction supports stable clamping over repeated cycles. Weighing 33.3 kg, the unit offers a stable base that contributes to cutting accuracy across the workpiece. Regular, simple maintenance preserves repeatability and minimises downtime, so workshop schedules stay on track and tooling investment delivers long-term value. Secure the Vertex VWT-4B via Metav Werkzeuge for dependable precision and angular flexibility; for technical questions or a detailed spec sheet contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VWT-4B GTIN: 4061905083402 ETIM: EC002173 ECLASS: 21020601 Facts Clamping force: 1200 kgf Jaw opening: 0–220 mm Accuracy: 0.01 mm Weight: 33.3 kg Dimensions: 110 x 240 x 230 mm Special features Material: cast iron Version: tilting milling vice Manufacturer: Vertex FAQ What materials can be machined with this vice? The vice is a general-purpose workholding device; the Vertex VWT-4B tilting milling vice is suitable for securing metal and non-metal workpieces that fit the jaw opening and fixture requirements. How precise is the clamping repeatability? Repeatability is specified at 0.01 mm for the tilting milling vice, enabling consistent positioning across multiple setups and parts. What range of jaw opening is available for clamping? The jaws open from 0 to 220 mm, accommodating a broad range of component sizes without additional adapters. Is the vice stable under heavy cutting forces? With a clamping force of 1200 kgf and a cast-iron body, the VWT-4B provides stable workholding for many milling operations that require high clamping pressure. How large is the unit and how much does it weigh? The vice measures 110 x 240 x 230 mm and weighs 33.3 kg, offering a compact yet solid footprint for many machine tables. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
110mm Toggle Clamp Horizontal Base With Safety Lock, Zinc Plated, 10kN Push / 11kN Hold - Kukamet
Take advantage of a compact lever clamp that combines high holding capacity and a corrosion-resistant finish for reliable jig and fixture work. Order directly via Metav Werkzeuge for consistent supply from Emmerich or ask the consultants for application advice. 351 Toggle Clamp – horizontal-foot lever clamp with safety lock and hook (Kukamet) The 351 Toggle Clamp is a horizontal-foot lever clamp designed for secure workholding in jigs and fixtures; it combines a safety lock, zinc-plated corrosion protection and a compact, hook-equipped design for repeatable clamping in production and workshop settings. Horizontal foot mounting for stable installation Safety lock prevents accidental release Zinc-plated corrosion-resistant finish 11,000 N maximum holding force Durable construction for dependable, repeatable clamping The clamp is manufactured with a zinc-plated finish that protects against corrosion and abrasion, making it suitable for repeated use in shop and light industrial environments. The metal finish reduces maintenance requirements and extends component life, which supports continuous production cycles and fewer interruptions. The compact housing and the included hook provide versatile attachment options for fixtures and jigs while keeping the footprint small and manageable. High clamping and holding forces for secure workholding Designed to deliver substantial forces, the device achieves a 10,000 N clamping force and an 11,000 N holding force, ensuring reliable retention of workpieces during machining, assembly or testing operations. The toggle mechanism converts a short lever travel into a stable, high-force hold; this mechanical advantage offers fast actuation with minimal operator effort while maintaining positional accuracy of the clamped part. Integration and mounting made straightforward A horizontal foot mounting design permits direct installation onto flat fixture plates or machine tables, allowing for simple alignment and fixation. The 110 mm thread length enables fine adjustment of clamp reach and engagement height, supporting a range of component thicknesses. At under 0.945 kg, the unit is light enough for easy handling during fixture setup yet robust enough for repeated cycles without deformation. Safety and practical benefit in everyday use The built-in safety lock secures the lever in closed position to prevent unintentional release, an important feature for applications where accidental actuation could damage parts or endanger operators. The simple lever action ensures rapid clamping and unclamping for high-throughput operations, while the corrosion-resistant treatment supports longevity even in humid workshop conditions. As a compact, mechanically reliable workholding device, it contributes to consistent process quality and reduced cycle variability. For secure, high-force clamping choose the Kukamet 351 toggle clamp—contact Metav Werkzeuge for tailored application advice and reliable delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 351-5-L GTIN: 8680731504842 SKU: 351-5-L Facts Maximum clamping force: 10,000 N Maximum holding force: 11,000 N Thread length: 110 mm Weight: 0.945 kg Special features Material: zinc-plated Mounting: horizontal foot Feature: safety lock With hook: yes Suitable application: lever/toggle clamping FAQ What is the maximum holding capacity of the clamp? The clamp offers a maximum holding force of 11,000 N, specified for the Kukamet 351 toggle clamp. Is the 351 suitable for fixture mounting on flat plates? Yes, the horizontal-foot design of the 351 toggle clamp allows stable mounting on flat fixture plates or machine tables. Does the clamp include a safety mechanism? A safety lock is integrated into the lever mechanism to prevent accidental release while the clamp is engaged. What surface treatment does the clamp have for corrosion resistance? The device is zinc-plated, which provides corrosion-resistant properties suitable for workshop conditions. How is the clamp adjusted for different workpiece heights? Adjustment is achieved via the threaded spindle with a thread length of 110 mm, enabling fine reach and engagement settings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110mm Toggle Clamp Vertical Base With Hook, 10kN Closing Force, Zinc Plated - Kukamet
Reliable clamping with a zinc-plated finish, up to 11,000 N holding force and a compact 0.86 kg weight ensure secure, repeatable fixture performance. The vertical mounting foot and 110 mm thread length support stable installation and deep engagement. Order the clamp directly via Metav Werkzeuge or consult the specialists for application advice. Toggle Latch Clamp 332 — Kukamet, vertical base, zinc-plated The Toggle Latch Clamp 332 is a zinc-plated lever clamp for secure fixture and transport latching, designed for vertical-foot mounting in industrial and workshop applications. Zinc-plated corrosion protection Up to 11,000 N holding force Vertical mounting foot for stability 110 mm thread length for deep engagement Heavy-duty performance for repeatable clamping The clamp delivers a clear mechanical advantage through its lever mechanism, providing a maximum clamping force of 10,000 N and a holding force of 11,000 N, values that reduce slip and maintain position under load. The lever-actuated closure converts manual input into consistent output force, useful for production jigs, transport latches and fixtures where repeatability is required. The compact mass of 0.86 kg keeps inertia low while enabling robust operation in continuous use. Durable finish and installation benefits A zinc-plated surface gives basic corrosion resistance for workshop and light industrial environments, reducing maintenance frequency and protecting mating parts. The clamp is supplied with a vertical base, allowing direct mounting to panels or fixture plates and improving load distribution across the mounting footprint. The 110 mm thread length supports secure engagement when paired with adjustable strike plates or hooks; the integrated hook option enables positive latching and safe retention during movement. Practical applications and operational advantages Suitable for fixture building, machine doors and container closures, this lever clamp is particularly advantageous where compact, repeatable securing is needed. The simple mechanical design minimises potential failure modes and facilitates quick visual checks in production lines. Combined with Metav Werkzeuge’s supply network, the unit is positioned as a pragmatic choice for workshops seeking reliable clamping without unnecessary complexity — a balance of functionality and serviceability for daily industrial tasks. For secure and reliable clamping solutions, request detailed availability and application support for the Kukamet Toggle Latch Clamp 332 from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific fixtures and batches. Technical data Article number: 332-5 GTIN: 8680731503975 Brand: Kukamet Core figures Weight: 0.86 kg Max clamping force: 10,000 N Max holding force: 11,000 N Thread length: 110 mm Materials & features Material: zinc-plated Mounting type: vertical base With hook: yes eClass: 21041718 ETIM: EC011973 FAQ What is the difference between clamping force and holding force for this clamp? Clamping force refers to the maximum force applied during closure (10,000 N), while holding force (11,000 N) describes the resistance to separation when engaged; both values are specified for the Kukamet toggle latch clamp 332 (SKU 332-5). Can the clamp be mounted on panels and fixture plates? Yes, the vertical base design allows direct mounting to panels or fixture plates, providing stable load distribution for workshop fixtures. Is the surface finish suitable for industrial environments? The zinc-plated finish offers corrosion protection suitable for many workshop and light industrial settings; for aggressive environments, additional surface treatment should be considered. Does the clamp include a hook for positive latching? The product is supplied with a hook option, enabling secure mechanical retention in transport and enclosure applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110mm Toggle Clamp Vertical Base With Safety Lock, 10 000N Thrust, Zinc Plated Hooked - Kukamet
Robust high-force clamping in a compact assembly-ready design: galvanised steel construction and an integrated safety lock combine to safeguard fixtures while reducing downtime. The vertical base and hook enable rapid engagement and reliable holding under repetitive use. Order the 312 locking clamp directly via Metav Werkzeuge or ask our consultants if needed. 312 locking clamp – Vertical-base lever toggle clamp with safety lock (Kukamet) 312 locking clamp is a vertical-base lever clamp intended for secure fixture clamping in jigs, assembly stations and production tooling. Vertical base for stable mounting Integrated safety lock prevents accidental release Galvanised steel for corrosion resistance Clamping force up to 10,000 N Consistent high-force performance for production use The 312 locking clamp delivers measurable holding capacity, with a clamping force of 10,000 N and a holding force of 11,000 N, making it suitable for repetitive clamping tasks where process stability matters. The lever-action toggle translates operator input into a secure hold with minimal travel, reducing cycle time in fixture operations. A threaded adjustment of 110 mm allows fine tuning of the engagement point, while the modest weight of 0.945 kg keeps handling and fixture load low. These measurable values support predictable process design and faster setup in production environments. Safer operation through mechanical locking and quick engagement Built-in safety measures limit unintended release during machining or handling. The integrated safety lock secures the lever once closed, preventing accidental opening under vibration or shock. The included hook provides a positive engagement point for quick connection and repeatable positioning. The toggle mechanism, explained simply, converts lever motion into axial clamping force, so operators can achieve strong, repeatable closure with limited travel. This combination reduces rework and enhances operator confidence when securing parts. Durable construction with low upkeep for busy shops The clamp is manufactured from galvanised steel, offering enhanced resistance to corrosion in workshop and light industrial environments. The vertical-foot mounting enables a compact footprint on fixtures and jigs while providing a rigid anchoring point for heavy-duty cycles. Corrosion protection and simple mechanical design translate into lower maintenance intervals and predictable lifetime performance, which supports continuous production without frequent part replacement. Routine inspection is straightforward: check the locking action and adjust the thread to compensate for wear. Integrates into fixtures for quicker throughput Designed for fixturing, the clamp’s vertical orientation and hook make it suitable for layered fixtures, assembly tables and clamping plates. Its reliable holding values allow design engineers to reduce the number of corrective checks and to streamline process flows. The mechanical nature of the device removes reliance on external power sources, improving uptime during shift changes or in constrained automation cells. For procurement and production planners, the clamp offers a pragmatic balance of force, durability and simplicity that supports consistent output. For secure, high-force clamping with proven safety, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 to discuss specification and supply of the 312 locking clamp. Technical Data Article number: 312-5-L GTIN: 8680731504903 ECLASS: 21041718 ETIM: EC011973 Core specifications Clamping force (max): 10,000 N Holding force (max): 11,000 N Thread length: 110 mm Weight: 0.945 kg Materials & features Material: galvanised steel Mounting: vertical base Hook: yes Safety lock: integrated SKU: 312-5-L FAQ What maximum clamping force does this clamp provide? The clamp offers a maximum clamping force of 10,000 N; the holding force is rated up to 11,000 N for the 312 locking clamp (SKU 312-5-L). Is the clamp suitable for use in environments with moisture or light corrosion risk? The galvanised steel finish improves corrosion resistance, so the clamp is suitable for workshop and light industrial environments where routine exposure to moisture may occur. How is the clamp mounted and adjusted on a fixture? The clamp is fitted via a vertical base designed for rigid mounting; adjustment of the engagement point is achieved by the threaded spindle with a length of 110 mm. Does the clamp include safety features to prevent accidental release? Yes, the device includes an integrated safety lock that secures the lever in the closed position to prevent unintended opening under vibration or impact. What role does the hook play in operation? The hook provides a positive engagement point for quick connection and repeatable positioning, enabling fast clamping cycles and consistent part registration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110x110x190mm Mini Chip Collector Handheld, Weighs 0.7 Kg - Vertex
Take advantage of the combination of a compact footprint, handheld operation and clear traceability to keep benches tidy with minimal interruption to production. Order the mini chip collector directly via Metav Werkzeuge or consult our team for advice on integration and stocking. VCC-16 Mini chip collector (handheld) by Vertex — compact 110 × 110 × 190 mm, portable The VCC-16 is a compact, handheld mini chip collector designed for manual removal of swarf and debris in confined workshop areas, ideal for quick spot cleaning and maintenance tasks. Compact 110 × 110 × 190 mm footprint Handheld design for easy spot cleaning Lightweight 0.7 kg for effortless handling Small footprint, big effect for busy benches The compact dimensions of this collector (110 × 110 × 190 mm) make it simple to store on crowded workbenches and to manoeuvre around fixtures. A small physical profile reduces obstruction during machining or inspection tasks and supports a quicker tidying routine, which in turn helps to maintain uninterrupted workflows. The portable form factor is particularly suited to trade shops and maintenance teams that require dependable, space-saving tools for daily operations. Handheld handling that speeds up cleaning cycles Designed as a handheld version, the unit offers fast, targeted removal of chips where vacuums and brushes can't reach without dismantling fixtures. At a listed weight of 0.7 kg, the collector balances stability with manoeuvrability to reduce user fatigue during repetitive clearing tasks. The manual operation enables precise control in sensitive areas, lowering the risk of dislodging fine components while accelerating routine cleaning and reducing machine downtime. Traceability and practical workshop benefits Supply chain and ordering are simplified through clear identifiers: SKU VCC-16 and GTIN 4061905083587 provide traceable procurement and inventory management. The mini collector’s robust, straightforward design supports minimal maintenance and easy replacement when needed, making it a pragmatic choice for both production and maintenance crews. Its handheld nature ensures quick response to swarf accumulation, protecting quality-critical processes and contributing to a tidier, safer working environment. For compact and reliable chip removal, request the Vertex VCC-16 from Metav Werkzeuge in Emmerich — contact info@metav-werkzeuge.com or call +49 2822 7131930 for recommendations and stock information Technical Data Article number: VCC-16 GTIN: 4061905083587 Manufacturer: Vertex Facts Dimensions: 110 × 110 × 190 mm Weight: 0.7 kg eClass: 21101790 Special features Handheld version Mini chip collector Suitable for weights up to 0.65 kg FAQ What is the primary purpose of this collector? The VCC-16 mini chip collector is intended for manual removal of swarf and debris in confined workshop areas, enabling quick spot cleaning. Is the unit suitable for frequent use on production benches? Yes, the handheld design and lightweight construction make the VCC-16 suitable for regular spot clearing without significant operator strain. What are the exact dimensions of the device? The collector measures 110 × 110 × 190 mm, providing a compact footprint for crowded benches. How is the VCC-16 identified for ordering? Ordering can be completed using the SKU VCC-16 or GTIN 4061905083587 to ensure accurate procurement. Does the product include information about material or coatings? Material and coating details are not specified in the provided data for the VCC-16, so please consult Metav Werkzeuge for further technical clarification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
110° Pneumatic Toggle Clamp Heavy Duty Horizontal Base Left Handle 2000 N Push, 11000 N Hold - Kukamet
Taking advantage of robust 11,000 N holding force, 2,000 N actuation and a left-hand, horizontal mounting for straightforward integration ensures consistent clamping and reduced setup time; order the Pneumatic Clamp directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Clamp 683-6-H-L — heavy-duty lever clamp with 2,000 N actuation (Kukamet) The Pneumatic Clamp 683-6-H-L is a heavy-duty lever-style clamp designed for secure, repeatable workholding in fixtures and jigs across demanding production environments. Heavy-duty lever clamp, 2,000 N actuation Holding force up to 11,000 N Horizontal base with left-hand handle Blackened, corrosion-resistant finish Reliable clamping power for production-grade fixtures The clamp delivers a 2,000 N actuation force that converts into a holding force of up to 11,000 N, providing confidence for medium to heavy machining and assembly tasks. The mechanism is lever-based, enabling fast engagement and secure locking without complex hydraulic systems. This direct mechanical action reduces cycle variability, which benefits processes that demand consistent clamping pressure and repeatability. The solid build and precise kinematics support integration into jigs where dependable, repeatable fixation is essential. Designed for efficient integration and ergonomic operation A horizontal base with a left-hand handle simplifies mounting and positioning on worktables and fixture plates, allowing the clamp to be fitted where space and access dictate orientation. The left-hand handle orientation is especially useful where operator clearance or automated loading routines favour that side. At 8.13 kg, the unit offers stable mass for vibration resistance while remaining manageable for fitting and alignment. The 70° operating angle provides a compact footprint, reducing interference with neighbouring components and enabling straightforward toolpath planning. Durability and serviceability for long-term uptime Finished in a blackened, corrosion-resistant coating, the clamp withstands workshop environments and resists surface wear from repeated operation. The heavy-duty execution and robust materials mean fewer unplanned interventions and lower maintenance frequency, supporting uninterrupted production. Where routine checks are required, the mechanical design allows straightforward inspection and replacement of wear parts without specialised equipment. Sourcing through Metav ensures a transparent supply chain and local stock buffering from Emmerich for predictable replenishment. Discuss the heavy-duty Kukamet 683-6-H-L with Metav Werkzeuge — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to secure reliable supply and technical advice from our Emmerich hub Technical Data SKU: 683-6-H-L GTIN: 8682843521779 Manufacturer: Kukamet Facts Actuation force: 2,000 N Holding force: 11,000 N Weight: 8.13 kg Angle: 70° eClass: 21021004 ETIM: EC011973 Special features Horizontal base with handle Handle positioned left Heavy-duty configuration Blackened finish Lever-style pneumatic clamp Category: Spanner FAQ How much clamping force does the clamp provide? The Kukamet Pneumatic Clamp 683-6-H-L provides an actuation force of 2,000 N and a holding force of up to 11,000 N, suitable for medium to heavy workholding tasks. Is the clamp suitable for automated fixture systems? Yes, the lever-style actuation and compact 70° operating angle make the clamp appropriate for integration into automated or semi-automated fixtures; the horizontal base supports stable mounting. What are the mounting and orientation options for this model? The unit is supplied with a horizontal base and a left-hand handle orientation, allowing direct installation on fixture plates where left-side actuation is required. How durable is the surface treatment in workshop conditions? The blackened finish offers corrosion resistance and improved surface hardness, supporting long-term use in typical workshop environments. Can Metav provide further technical documentation or CAD data? Technical documentation and specifications can be requested through Metav Werkzeuge; the product is distributed from Emmerich to support predictable supply. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
111mm Massiver Haltearm Vertikalspanner, 2000N Druckkraft, WinkelfuĂź, 0,468kg - Kukamet
Die kompakte Konstruktion kombiniert Druckkraft 2000 N mit einer Haltekraft 2500 N und einem stabilen Haltearm, sodass produktive Spannvorgänge sicher und präzise ausgeführt werden können; bestellen Sie den Vertikalspanner direkt über Metav oder kontaktieren Sie unsere technische Beratung bei Bedarf. Vertikalspanner von Kukamet Der Vertikalspanner ist ein robuster Hebelspanner für präzise Spannaufgaben in Werkstatt und Produktion. Vertikalspanner »B213-3-D-C2« von Kukamet Druckkraft bis 2000 N für sicheren Halt Haltekraft bis 2500 N gegen Verrutschen Arm 111 mm, massiver Haltearm aus Stahl Befestigungsart: Winkelfuß, Gewicht 0,468 kg Robuste Bauweise für zuverlässige Spannlösungen Die Auslegung mit einem massiven Haltearm sorgt für stabile Fixierung auch bei wechselnden Lasten. Die Oberfläche Schwarz brüniert reduziert Korrosion und verlängert die Lebensdauer von beweglichen Teilen. Durch die robuste Konstruktion lassen sich Werkstücke sicher positionieren, wodurch Nacharbeiten reduziert und die Prozesssicherheit erhöht werden. Die Kombination aus mechanischer Festigkeit und kompakter Bauform ermöglicht eine einfache Integration an vorhandenen Vorrichtungen. Präzise Kraftdaten für wiederholbare Ergebnisse Mit einer Druckkraft von 2000 N und einer Haltekraft von 2500 N bietet das Gerät belastbare Kenndaten für wiederholbare Spannprozesse. Diese Werte ermöglichen das sichere Halten mittelstarker Bauteile ohne unnötige Überdimensionierung. Anwender profitieren von klaren, messbaren Parametern, die die Auswahl für definierte Fertigungsaufgaben erleichtern und Planungsunsicherheit reduzieren. Kompakte Abmessungen vereinfachen Montage und Einsatz Der 111 mm Arm und das geringe Gewicht 0,468 kg machen die Einheit handlich und montagefreundlich. Die Befestigung über den Winkelfuß erlaubt flexible Positionierung an Maschinentischen und Vorrichtungsplatten. Für Montagebetriebe und Wartungsteams bedeutet das weniger Aufwand bei Umrüstungen und höhere Effizienz beim Einrüsten von Prüfständen oder Prototypen. Einfache Handhabung und geringe Pflegeanforderung Als Hebelspanner ausgelegt, arbeitet das Produkt ergonomisch und schnell, wodurch Taktzeiten gesenkt werden. Die brünierte Oberfläche verlangt nur minimale Pflege und ist unempfindlich gegenüber üblichen Werkstattbedingungen. So bleibt der Fokus auf Fertigungsqualität und nicht auf aufwändiger Instandhaltung. Die robuste Mechanik bietet lange Nutzungszyklen und konstante Spannkraft über viele Einsätze hinweg. Setzen Sie auf die Präzision von Kukamet: Den Vertikalspanner B213-3-D-C2 erhalten Sie direkt bei Metav in Emmerich — bei Fragen erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: B213-3-D-C2 Bezeichnung: Vertikalspanner 213 Marke: Kukamet Daten Druckkraft: 2000 N Haltekraft: 2500 N Arm: 111 mm Gewicht: 0,468 kg Besonderheiten Befestigungsart: Winkelfuß Material: Schwarz brüniert Haltearm: massiver Haltearm Funktionsprinzip: Hebelspanner FAQ Wie hoch ist die maximale Druckkraft des Spanners? Der Vertikalspanner B213-3-D-C2 von Kukamet verfügt über eine maximale Druckkraft von 2000 N und eine Haltekraft von 2500 N, womit er für viele Montage‑ und Spannaufgaben in Werkstatt und Produktion geeignet ist. Welche Befestigungsart ist vorhanden und wie wird montiert? Der Spannfuß ist als Winkelfuß ausgeführt; die Montage erfolgt über gängige Befestigungsbohrungen am Tisch oder an Vorrichtungen, wodurch sich der Kukamet Vertikalspanner flexibel integrieren lässt. Für welche Einsatzbereiche ist dieses Modell gedacht? Das Modell B213-3-D-C2 ist für Handwerk, Instandhaltung und industrielle Vorrichtungen konzipiert, insbesondere dort, wo kompakte Abmessungen und wiederholbare Spannkraft gefragt sind. Wie widerstandsfähig ist die Oberfläche gegen Werkstattbedingungen? Die Oberfläche ist Schwarz brüniert, was Korrosionsschutz bietet und die Pflegeanforderung reduziert; dadurch bleibt die Funktionalität über lange Einsatzzyklen erhalten. Welches Maß hat der Haltearm und wie beeinflusst das die Anwendung? Der Haltearm misst 111 mm; diese Länge ermöglicht eine sichere Spannwirkung bei gleichzeitig kompakter Bauweise, ideal für beengte Einbausituationen.
111mm Vertical Clamp 2,000N Closing Force, Zinc Coated Heavy-Duty Arm, Angle Base - Kukamet
Order the 213 Vertical clamp for reliable, repeatable workholding thanks to its galvanised construction, compact 111 mm arm and high holding capacity; order the clamp directly via Metav Werkzeuge or consult the specialists for fixture integration. 213 Vertical clamp by Kukamet — galvanised, 2,500 N holding force The 213 Vertical clamp is a lever-type workholding device intended for fixtures and jigs, offering a sturdy clamping arm and angle-foot mounting for secure positioning in production and assembly environments Robust massive holding arm Angle-foot mounting for stable fit Galvanised finish resists corrosion 2,500 N maximum holding force Consistent, measurable holding for production use The 213 Vertical clamp is engineered to deliver consistent clamping results: a 2,500 N maximum holding force combined with a 2,000 N maximum pressing force provides clearly defined limits for fixture design and process planning. These figures make it straightforward to select the clamp where repeatable retention under load is required, reducing the risk of part movement during machining or assembly. The clamping concept is lever-actuated, which converts operator input into reliable force transmission and keeps cycle times short. Compact construction that fits into tight fixtures A compact arm length of 111 mm and a total unit weight of 0.468 kg allow integration into dense tool layouts without excessive mass or bulk. The Galvanised finish protects the component against workshop humidity and coolant splash, extending service life and preserving appearance. The Sturdy clamping arm construction minimises flex under load, improving repeatability and cutting down on rework caused by micro-movement in the fixture. The reduced footprint makes the clamp suitable for both manual jigs and automated clamping stations. Fast installation and dependable alignment Fitted with an Angle-foot mounting, the clamp locates cleanly on flat fixture plates and ensures a stable, moment-resistant attachment point. The lever clamp mechanism offers an intuitive positive action and visible engagement, which supports process control and operator confidence. Installation requires only standard fastening hardware to the angle foot, enabling rapid retrofit into existing tooling. The simple mechanical design minimises maintenance requirements and keeps ownership straightforward. Designed for workshop reliability and supply-chain confidence Produced by Kukamet and supplied via Metav Werkzeuge, the vertical clamp is part of a practical selection of clamping elements that balance robustness with accessibility. The galvanised material and solid construction make the clamp a low-complexity, high-value component for production lines where downtime and variability must be reduced. Metav’s logistics from Emmerich provide consistent availability for small-batch and large-scale orders, supporting predictable lead times for maintenance and fixture build projects. Contact Metav Werkzeuge to discuss how the Kukamet 213 Vertical clamp (SKU 213-3-D-C2) fits into existing fixtures, and request tailored advice from the Emmerich-based specialists at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 213-3-D-C2 GTIN: 8680731501964 Manufacturer: Kukamet eClass: 21041717 ETIM: EC011973 Facts Weight: 0.468 kg Arm length: 111 mm Max pressing force: 2,000 N Max holding force: 2,500 N Special features Angle-foot mounting Massive holding arm Galvanised material Lever-type clamp (lever clamp) FAQ What maximum holding and pressing forces does the clamp provide? The Kukamet 213 vertical clamp achieves a maximum holding force of 2,500 N and a maximum pressing force of 2,000 N (SKU 213-3-D-C2), providing defined limits for fixture design. Is the clamp suitable for humid or coolant-exposed environments? Yes; the galvanised finish on the 213 Vertical clamp offers corrosion resistance suitable for workshop conditions with occasional coolant splash or elevated humidity. How is the clamp mounted to a fixture plate? The unit uses an angle-foot mounting that secures to a flat plate with standard fasteners, enabling stable positioning and simple retrofit into jigs and fixtures. What are the main benefits of the clamp's arm and overall size? The robust arm construction and compact 111 mm footprint limit flex and save space in dense tool layouts, while the overall weight of 0.468 kg keeps the fixture mass low. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Collet Chuck High Clamping Force 0.03mm Accuracy, 1200 kgf - Vertex
Take advantage of reliable clamping performance and high rotational speed in a compact package to keep machining cycles efficient. Order directly via Metav Werkzeuge or consult Metav's advisors for matching accessories and mounting advice. VSK-4 lathe chuck — Compact 112 mm with 1,200 kgf clamping force The VSK-4 is a compact lathe chuck designed for secure workholding in turning and general-purpose machining applications. 112 mm compact diameter for small workpieces 1,200 kgf clamping force for secure hold High precision runout of 0.03 mm Rated up to 2,500 r.p.m. for fast machining Dependable clamping that improves machining consistency The chuck delivers consistent clamping force thanks to a rated 1,200 kgf holding capacity, which reduces slippage and supports repeatable setups. With a diameter of 112 mm and a moderate weight of 3.45 kg, it is suitable for compact toolrooms and versatile enough for varied workpieces. The specified accuracy of 0.03 mm refers to radial runout tolerance and indicates tight concentricity during rotation, which helps maintain surface finish and dimensional conformity across production runs. Faster spindle speeds without compromising control Rated for operation up to 2,500 r.p.m., the chuck enables higher spindle speeds that shorten cycle times on many turning operations. The ability to sustain elevated revolutions while maintaining low runout supports more efficient material removal and smoother cutting conditions. This performance characteristic is especially beneficial where throughput and short setup times are priorities in small and medium-sized workshops. Practical workshop handling and compatibility The compact form factor supports easy installation and handling on a broad range of lathes where space and accessibility are limited. At 3.45 kg, the unit balances ease of mounting with robust construction suitable for regular use. The product classifies as a clamping technology item for lathe workholding and integrates straightforwardly into established workflows, reducing downtime during tool changes and enabling quicker job swaps on mixed-production benches. Built for reliability and straightforward sourcing Manufactured under the Vertex brand, the chuck focuses on core functionality: secure holding, repeatable accuracy and straightforward operation. Sourcing through Metav provides the added benefit of a European distribution channel with a quality filter in Emmerich, supporting reliable supply and accessory availability. The combination of a compact footprint, precise runout, and reliable clamping makes it a practical choice for workshops seeking to standardise workholding without excessive complexity. Discuss the Vertex VSK-4 with Metav Werkzeuge to verify fitment and accessory needs for the 1,200 kgf clamping solution — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: VSK-4 GTIN: 4061905084614 Title: Vertex Spannfutter einfach Online bestellen Facts Diameter: 112 mm Weight: 3.45 kg Clamping force: 1,200 kgf Max speed: 2,500 r.p.m. Accuracy (runout): 0.03 mm Special features Category: Clamping technology (lathe chuck) Brand: Vertex eClass: 21020590 Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/93/db/9a/63/639adb93fb5a6051082e2fb8/VSK-4-main.png Shop note: Lathe chuck with fast shipping; wide range of tools available FAQ What is the maximum rotational speed for this chuck? The VSK-4 is specified for operation up to 2,500 r.p.m., allowing higher-speed turning where appropriate. How precise is the clamping concentricity? The chuck offers an accuracy (runout) of 0.03 mm, which supports consistent concentricity during rotation. What clamping force does the unit provide? The Vertex VSK-4 provides a rated clamping force of 1,200 kgf to secure workpieces during machining. Is the chuck suitable for small workshop lathes? With a 112 mm diameter and a weight of 3.45 kg, the unit is optimised for compact setups and smaller lathes common in toolrooms. Where can accessories or mounting advice be obtained? Metav Werkzeuge supplies accessories and can advise on compatible mounting options for the VSK-4 to match specific machine spindles. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
112mm MT2 Taper Arbor With B16 Chuck Mount, Hardened And Ground DIN 238 - TECWERK
Take advantage of the combination of MK2 taper, B16 drill-chuck shank and a fully hardened and ground finish for consistent concentricity and long service life. The compact 112 mm length ensures straightforward integration into standard drilling and turning machines. Order the taper arbor directly via Metav Werkzeuge or ask our consultants if additional technical data is required. Taper arbor MK2 x B16, hardened and ground – TECWERK The TECWERK taper arbor MK2 x B16 for secure drill-chuck mounting on drilling and turning machines, compliant with DIN 238 and finished hardened and ground for repeatable precision MK2 taper with B16 drill-chuck shank Conforms to DIN 238 for interchangeability Fully hardened and ground for durability Designed for drill and lathe chuck mounting Secure mounting for consistent concentricity and repeatable results The arbor is engineered as a purpose-built solution for mounting drill chucks on both drilling and turning machines. The combination of the MK2 taper on the outer cone and the B16 drill-chuck shank provides a standardised interface that simplifies tool changes and maintains axial and radial run-out within tight tolerances. Because the shank is hardened and ground, wear is minimised and concentricity remains stable over extended use, reducing the need for frequent re-alignment and preventing scrapped workpieces. Fast compatibility with common machine spindles and chucks Conformity with DIN 238 ensures the arbor mates reliably with established drill-chuck tapers and machine spindles, promoting cross-machine compatibility across a workshop. The compact 112 mm overall length makes the component easy to handle and fit in confined setups while still providing sufficient engagement to secure the chuck. The result is a predictable interface that lowers setup time and increases productive machining time. Robust construction that reduces downtime and maintenance By specifying a fully hardened and ground finish, the arbor resists deformation and abrasion under repeated insertion and removal cycles. This durability translates into fewer replacements and lower lifetime costs for the tooling inventory. The robust surface treatment also makes the component less sensitive to small contamination, so cleaning intervals can be extended without compromising safety or performance. Practical handling and workshop benefits The straightforward geometry and standardised tapers mean the arbor is quick to inspect and easy to replace if required. Its design focuses on the essential workshop needs: reliable clamping of drill chucks, predictable run-out, and durable contact surfaces. Combined with the technical documentation reference DIN 238, the arbor provides a clear specification for purchasing, inventory management and machine setup procedures. For procurement or technical advice regarding the TECWERK MK2 x B16 taper arbor, contact Metav Werkzeuge for precise delivery and application guidance – phone +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data Article number: 2000832326NW Standard: DIN 238 Shank connection: B16 Outer taper: MK2 Overall length: 112 mm Manufacturer: TECWERK Product type: Taper arbor Additional information: with drill-chuck taper DIN 238 · fully hardened and ground · for mounting drill chucks on drilling and turning machines · Execution: hardened and ground Core specifications Taper size: MK2 Drill-chuck shank: B16 Length: 112 mm Compliance: DIN 238 Materials & features Hardened and ground finish For drill and lathe chuck mounting Standardised interface for interchangeability FAQ What machines is this taper arbor compatible with? The TECWERK taper arbor MK2 x B16 is designed for use with drilling and turning machines that accept an MK2 outer taper and a B16 drill-chuck shank, following DIN 238 specifications. How does the hardened and ground finish benefit workshop use? A hardened and ground surface on the arbor reduces wear and maintains concentricity, which prolongs service life and minimises run-out-related rework when the arbor is used to mount chucks. Is this arbor compliant with any industry standard? Yes, the arbor conforms to DIN 238, ensuring compatibility with standard drill-chuck tapers and facilitating interchangeability across machines. Can the arbor be used with different drill chucks? Provided the drill chuck accepts a B16 taper, the arbor will accept it; the standardised interface supports a range of chucks designed to DIN 238. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
112mm Quick-Change Tool Holder Head D1 With Eccentric Clamp, Hardened 40-Tooth 9° Indexing - TECWERK
Benefit from rapid tool changes, secure eccentric clamping and a proven 0.01 mm repeatability for stable, high-throughput machining. The hardened and ground contact surfaces extend service life while 40 indexing positions allow fast retooling at 9° increments — order directly via Metav Werkzeuge or consult our specialists for application-specific advice. TECWERK Quick-change Toolholder Head Gr. D1 — 40-position indexing, 40 mm bore A TECWERK Quick-change Toolholder Head Gr. D1 designed for fast swaps of cutting tools in lathe and CNC toolpost systems, featuring eccentric clamping and industrial-grade repeatability. Eccentric clamp for secure rapid tool change Repeatability to 0.01 mm for consistent results 40-position indexing with 9° increments Hardened, ground gear and contact surfaces Reduce downtime with faster, repeatable tool changes The quick-change head uses an eccentric clamping mechanism to lock cutters reliably, enabling significantly reduced tool-change time compared with conventional fixtures. Because the system delivers a repeatability of 0.01 mm, process variation is minimised and set-up time for recurring operations is cut. Eccentric clamping converts a short lever action into strong radial force, so the head holds the cutting insert or holder firmly without complex tightening sequences — a practical advantage on busy turning centres and manual lathes where cycle time matters. Flexible indexing and precise height adjustment for versatile set-ups With 40 teeth in the indexing ring, each position corresponds to a 9° increment, allowing a wide range of tool angles without disassembly. The central bore of 40 mm accepts the mounting body, and three maximum overhang options (112 / 116 / 124 mm) permit selection according to reach and rigidity requirements. Tip height is set via a dedicated adjustment screw on the toolholder, which simplifies achieving correct centre height and avoids repeated scraping or shimming — an essential feature for shops that switch between facing, turning and profiling operations. Hardened components for durable accuracy and low maintenance The gearing and mating contact faces are hardened and ground, ensuring long-term resistance to wear and preserving datum accuracy even under repetitive indexing cycles. This construction reduces the need for frequent regrinding or replacement, supporting predictable maintenance intervals and lower lifetime cost of ownership. Built to integrate into workshop tool systems, the head is suited for demanding production environments where repeatable alignment and robust clamping determine part quality and process stability. For tailored advice on selecting the right TECWERK quick-change head for specific machines and to arrange supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support. Technical Data Article number: 2000832154NW Type: D1 Designation: Quick-change toolholder head Gr. D1 Brand: TECWERK Facts Bore diameter: 40 mm Index positions: 40 Index increment: 9° Repeatability: 0.01 mm Maximum overhang: 112 / 116 / 124 mm Packaging unit: 1 Special features Eccentric clamping for rapid tool changes Tip height adjustable via set screw at the holder Hardened and ground gear and contact surfaces 40-position indexing for multiple tool angles FAQ Is the quick-change head compatible with standard toolposts? Compatibility depends on the toolpost and mounting body interface; the TECWERK Quick-change Toolholder Head Gr. D1 is designed around a 40 mm bore and common D1-type interfaces, so matching the mounting shank or adapter is required for direct fitment. How precise is the indexing and how is it achieved? Indexing is achieved by a 40-tooth ring giving 9° increments; the mechanism provides secured positions and, together with the hardened contact faces, supports the stated 0.01 mm repeatability during re-clamping. Can the tip height be fine-tuned after installation? Yes, the tip height on the quick-change holder is adjusted by a set screw on the toolholder, enabling fine height correction without removing the head from the machine. What are the implications of the different maximum overhangs? Choosing between 112, 116 or 124 mm overhang balances reach against rigidity: shorter overhangs improve stiffness and reduce deflection, while longer overhangs permit greater access to larger workpieces. Is the head suitable for heavy-duty production use? The hardened, ground gear and main contact surfaces are specified for extended wear resistance, making the head well suited to repetitive production tasks where durable accuracy is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
112mm Reduction Sleeve MK3 to MK2 Hardened Ground DIN 2185, Fully Hardened - TECWERK
Benefit from a hardened and ground construction combined with DIN 2185 conformity for consistent concentricity and long service life; order the Reducer sleeve DIN 2185 MK3xMK2 directly via Metav Werkzeuge or request compatibility advice from our technical consultants. Reducer sleeve DIN 2185 MK3xMK2 – hardened, ground adapter (TECWERK) Reducer sleeve DIN 2185 MK3xMK2 for adapting MK3 spindles to MK2 tools; hardened and ground for secure seating and repeatable concentricity in workshop and industrial machining DIN 2185 standardised design Fully hardened and ground finish Outer taper MK3 – inner taper MK2 Overall length 112 mm for deep insertion Durable, standard-compliant construction for stable tool holding The hardened and ground finish of this adapter ensures a reliable mechanical fit and reduced wear over time. Conformance to DIN 2185 gives a clear, verifiable basis for integration into existing toolholding systems and supports consistent interchangeability across machines. Hardening increases resistance to deformation under clamping loads, while the ground surfaces improve surface contact and reduce micro-movements that can cause increased runout. This combination supports sustained precision in repetitive production tasks and lowers the frequency of rework. Compact compatibility that simplifies spindle-to-tool transitions Designed as a spindle reducer from MK3 to MK2, this sleeve provides a straightforward solution for machines that require occasional downgrades in taper size without changing the spindle or toolholder. The internal MK2 and external MK3 tapers are machined to mating tolerances that facilitate safe seating of Morse taper tooling. Workshops benefit from greater flexibility in tooling choices and reduced inventory of dedicated arbors. The adapter’s controlled geometry helps maintain rotational accuracy when using smaller shank tooling in larger spindles. Measured length and fit improve insertion control and accessibility With an overall length of 112 mm, the sleeve allows for deeper insertion where tool overhang or reach is required, while maintaining sufficient contact length for secure clamping. The extended length assists in axial alignment during installation and can be particularly advantageous when working with through-spindle coolant or longer tooling assemblies. Clear, measurable dimensions help planning for toolchanger clearances and collision checks, supporting safe integration into automated setups. Practical benefits for workshop reliability and lifecycle costs By choosing a hardened, ground adapter made to standards, maintenance intervals can be extended and the risk of taper damage reduced. The robust finish supports repeatable seating, which in turn preserves spindle and tooling condition. For procurement, selecting a standard reducer sleeve minimises the need for bespoke solutions and streamlines spare-part lists. This contributes to predictable uptime and supports the operational reliability demanded by both small workshops and production environments. Contact Metav Werkzeuge for application guidance or to request a technical compatibility check for the TECWERK reducer sleeve; Metav Werkzeuge can advise on fitment and delivery from Emmerich. Technical Data Article number: 2000832354NW Designation: Reducer sleeve DIN 2185 MK3xMK2 Brand: TECWERK Data Standard: DIN 2185 Overall length: 112 mm Inner taper: MK2 Outer taper: MK3 Special features Hardened and ground inside and out Suitable for tools with Morse taper Execution: hardened and ground FAQ Is this sleeve compatible with all MK3 spindles? Compatibility depends on spindle tolerance and seating condition; the Reducer sleeve DIN 2185 MK3xMK2 is manufactured to DIN 2185 and fits standard MK3 tapers, but spindle inspection is recommended prior to use. Can the sleeve be used with Morse taper tooling? Yes, the adapter is suitable for tools with a Morse taper, providing secure seating when matched with corresponding MK2 tooling. What is the insertion depth and how does the length affect operation? The overall length is 112 mm, allowing for deeper insertion and improved axial alignment, which assists with tool reach and stability during machining. Does the hardened and ground finish reduce runout? Hardened and ground surfaces enhance contact quality and resist deformation, contributing to lower runout and more consistent rotational accuracy during use. Which SKU identifies this product for ordering? Order reference: 2000832354NW (TECWERK reducer sleeve, DIN 2185 MK3xMK2) Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
112mm Self-Centring 6-Jaw Chuck High Speed 1200r.p.m. - Vertex
Take advantage of reliable, fast clamping through the combination of a six-jaw, self-centring design and a 112 mm clamping diameter for consistent production results; order via Metav Werkzeuge or consult the technical team for machine-specific integration. VAS-4 Vertex six-jaw self-centring chuck, 112 mm, 1,200 rpm A VAS-4 six-jaw, self-centring chuck engineered for precise clamping in machining and assembly environments 112 mm clamping diameter Six-jaw self-centring design Rated up to 1,200 rpm Robust build at 4.2 kg High-performance clamping for steady throughput The primary design focus is repeatable clamping accuracy under production conditions. The six-jaw layout provides even force distribution around the workpiece, which reduces vibration and enhances concentricity compared with fewer-jaw solutions. Rated for up to 1,200 rpm, the chuck supports efficient spindle speeds while maintaining secure holding power. Built to be compact yet substantial, the device’s 4.2 kg mass contributes to mechanical stability during machining cycles, thereby improving final part quality. Precision mechanics that simplify setup and increase uptime A self-centring jaw system reduces the need for repeated manual alignment, shortening setup times and lowering the risk of misalignment during batch runs. The 112 mm diameter accommodates a range of common part sizes while the six-jaw configuration enables uniform gripping force, which helps to protect delicate surfaces and maintain dimensional tolerances. For environments where repeatability matters, this clamping solution offers a straightforward method to improve process consistency and reduce scrap rates. Designed for dependable operation and straightforward maintenance Mechanical simplicity is a key benefit: the chuck’s construction prioritises long service intervals and predictable behaviour under load. The robust components support everyday industrial use, and the accessible design facilitates inspection and routine lubrication without complex disassembly. Using a well-engineered clamping device reduces unplanned downtime and contributes to a more productive workflow, translating directly into lower operational costs over the long term. Confidence through partnership and practical service Choosing this Vertex clamping solution brings both a technical benefit and a reliable supply route: the product is available through Metav Werkzeuge, which provides a wide selection of precision tools and a practical logistics base in Emmerich. For procurement planning and integration into existing tool inventories, expert advice from the supplier helps ensure the chuck matches machine interfaces and process requirements, supporting a smooth commissioning phase. For specification confirmation or tailored advice on integrating the Vertex VAS-4 into a production cell, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options. Technical data Article number: VAS-4 GTIN: 4061905083754 Brand: Vertex Product type: chuck Facts Diameter: 112 mm Max. speed: 1,200 rpm Weight: 4.2 kg Special features Six-jaw, self-centring Precision clamping for machining applications Compact, robust construction FAQ What is the maximum rotational speed for this chuck? The chuck is rated for up to 1,200 rpm; this limit should be observed to maintain optimal clamping performance of the VAS-4 Vertex chuck. Is the chuck self-centring and what benefit does that provide? Yes, the VAS-4 is a six-jaw, self-centring unit; the feature reduces setup time and improves concentricity across production batches. Which clamping diameter does the chuck support? The chuck provides a nominal clamping diameter of 112 mm, suitable for a wide range of standard workpieces. How heavy is the chuck and why does weight matter? The device weighs 4.2 kg; the mass contributes to mechanical stability and helps dampen vibration during machining. Can this chuck be used for precision production runs? Designed for repeatable clamping, the VAS-4 Vertex chuck is suited to precision production where consistent concentricity and minimal setup variation are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
112mm Three-Point Chuck, 3-Jaw Self-Centring, 1200 kgf Clamping Force, 2500 rpm - Vertex
Take advantage of the combination of robust 1,200 kgf clamping force, high repeatability with 0.03 mm accuracy, and a compact 112 mm diameter for secure, consistent workholding. Order the VSC‑4 directly via Metav Werkzeuge or consult the team for application advice. Three‑jaw chuck VSC‑4 — 112 mm diameter, 1,200 kgf clamping force (Vertex) The Three‑jaw chuck VSC‑4 is designed as a reliable workholding solution for turning and general lathe operations across workshops and production environments 112 mm nominal diameter 1,200 kgf clamping force Up to 2,500 rpm operational speed Repeatability accuracy 0.03 mm Consistent clamping that keeps production moving The central advantage of this workholding device is its high clamping force, which provides a secure grip on the workpiece and reduces the likelihood of slippage during machining. With a rated 1,200 kgf capacity, the chuck maintains stable contact under cutting loads, supporting consistent surface finish and fewer rejects. The result is improved process reliability and a measurable reduction in downtime caused by re-clamping or part displacement. Precision that minimises rework and inspection time Accuracy is a key metric in precision turning. The unit delivers 0.03 mm repeatability, which supports tighter tolerances and more predictable part runout between cycles. For production environments where inspection steps add cost, this level of consistency helps to lower the frequency of corrective machining and the need for secondary measuring operations. The 112 mm nominal diameter provides a balance between compact footprint and practical jaw travel for a wide range of turning tasks. Performance tailored to standard lathe speeds The chuck is specified for operation up to 2,500 rpm, enabling efficient cycle times on typical shop-floor lathes without compromising concentricity. Operating at these spindle speeds, the device supports both batch and single-piece workflows, where rotational stability translates directly into improved tool life and surface integrity. The combination of speed capability and clamping capacity contributes to shorter machining cycles while preserving part quality. Designed for straightforward integration and dependable use Built for industrial use under Vertex quality standards, the VSC‑4 combines measurable technical data with practical benefits for workholding setups. The three-jaw configuration simplifies centring and reduces setup time compared with multi-component fixturing, while the documented repeatability and speed ratings allow planners to assess cycle capability with confidence. For applications requiring verified performance, the chuck’s specification aids in process planning and risk assessment. Contact Metav Werkzeuge today for specific mounting information or to discuss how the VSC‑4 can be integrated into existing turning processes; Metav’s consultants are available to support technical selection and delivery from Emmerich. Technical data SKU: VSC-4 GTIN: 4061905095818 Manufacturer: Vertex Facts Diameter: 112 mm Repeatability/accuracy: 0.03 mm Maximum speed: 2,500 rpm Clamping force: 1,200 kgf eClass: 21020590 Special features Three jaws configuration Suitable for lathe workholding Designed for consistent repeatability Compact nominal diameter FAQ What machining tasks is this chuck suited for? The VSC‑4 three‑jaw chuck is suited for general turning and standard lathe workholding where a 112 mm nominal diameter and strong clamping are required; its specification supports typical workshop turning operations. How precise is the clamping performance? The chuck offers a repeatability of 0.03 mm, which helps to maintain tight runout tolerances across repeated setups and reduces rework in serial production. Can the VSC‑4 be used at high spindle speeds? Yes, the VSC‑4 is rated for operation up to 2,500 rpm, enabling efficient cycle times on many conventional and CNC lathes without compromising concentricity. What does the clamping force rating mean in practice? A clamping force of 1,200 kgf indicates the chuck’s capacity to hold workpieces securely under cutting loads, improving stability and minimising the risk of slippage during machining. Which identifier should be quoted when ordering or checking compatibility? Please refer to the SKU VSC‑4 and the GTIN 4061905095818 when enquiring about this Vertex three‑jaw chuck. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
112mm Vertical Clamp 1,200N Pressing Force, Massive Holding Arm, Black Oxide Finish - Kukamet
Benefit from secure, compact workholding with a massive holding arm, a 112 mm span and up to 1,400 N holding force for reliable fixture performance. Order the vertical clamp via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 – Kukamet vertical clamp with 112 mm arm and 1,400 N holding force The Vertikalspanner 212 is a vertical clamp designed for compact, repeatable fixturing in assembly and light machining setups. Solid 112 mm holding arm Vertical foot mounting Holding force up to 1,400 N Compact 228 g weight Secure clamping for consistent production results The clamp delivers a holding force of 1,400 N and a pressing force of 1,200 N, providing stable fixation for small to medium workpieces during repetitive operations. The massive holding arm reduces deflection under load, which translates into fewer repositioning steps and less rework. By converting force ratings into practical outcome, this fixturing element supports higher throughput and predictable process quality in jigs, fixtures and assembly lines. Space-saving mounting that fits workshop grids and plates Featuring a vertical foot mounting, the device is optimised for direct installation on fixture plates or bench tops where vertical actuation is required. The 112 mm arm reach balances accessibility and compactness, while the 228 g mass keeps the component lightweight for modular fixture designs. The blackened surface finish allows integration into existing toolrooms without visual contrast, and the overall footprint suits dense fixture layouts where every millimetre counts. Durable finish and robust construction for long service intervals Constructed with a blackened finish and a reinforced arm, the clamp is engineered for repetitive use in industrial environments. The hardened arm geometry improves resistance to wear and minimises play over many clamping cycles, supporting consistent clamping forces over time. Intended for use in assembly, holding during light machining and repeatable fixture operations, this component combines compact design with industrial-grade endurance to help maintain stable production quality. Secure workshop fixturing with Kukamet reliability — contact Metav Werkzeuge for product details and supply from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B212-2-D-C2 GTIN: 8682843522271 Manufacturer: Kukamet Facts Arm: 112 mm Weight: 0.228 kg Holding force: 1,400 N Pressing force: 1,200 N eClass: 21041717 ETIM: EC011973 Special features Material / finish: blackened finish Mounting: vertical foot Massive holding arm Category: Spanner FAQ What maximum clamping forces does the Vertikalspanner 212 provide? The Vertikalspanner 212 offers a holding force of up to 1,400 N and a pressing force of 1,200 N for secure fixturing in repetitive processes. How is the clamp mounted in a fixture? Mounting is via a vertical foot, making the clamp suitable for direct installation on fixture plates and bench tops where vertical actuation is required. What is the effective reach of the clamping arm? The device has an arm length of 112 mm, providing a balance between reach and compact fixture integration for dense layouts. Is the finish suitable for workshop environments? The Vertikalspanner 212 features a blackened finish that helps resist surface wear and reduces glare in production settings. Which applications suit this clamp best? Designed for assembly, jigs and light machining fixtures, the clamp is intended for repeatable workholding tasks where compact size and consistent clamping force are important. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp 1200N Closing Force, Heavy-Duty Arm & Safety Lock, Zinc-Plated - Kukamet
Robust zinc-plated construction, a massive holding arm and an integrated safety lock deliver dependable clamping with up to 1,200 N of clamping force and 1,400 N holding force — ideal for repetitive fixture tasks. Order the Vertical clamp 212 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 — Vertical clamp with solid arm and safety lock (Kukamet) The Vertical clamp 212 is a compact vertical clamping device for jigs and fixtures, designed to secure workpieces reliably on presses, test rigs and assembly stations. Zinc-plated corrosion resistance Massive holding arm with safety lock 1,200 N clamping force, 1,400 N holding force Vertical-foot mounting for secure installation Reliable clamping performance for consistent production The clamp offers a defined clamping force of 1,200 N and a holding force of 1,400 N, values that translate into repeatable, measurable securing of components during machining or assembly. Stated in newtons, these figures indicate the axial force applied and the maximum static retention; they support process stability and reduce rework rates. For workshop planners and production engineers, the clear numeric specification simplifies integration into jigs and fixtures and helps in selecting the correct clamp for cycle times and component sizes. The compact design supports dense fixture layouts without sacrificing repeatability. Durable construction and simple integration reduce downtime Constructed from zinc-plated steel with a massive holding arm, the device resists corrosion in humid workshop environments while offering mechanical robustness for frequent actuation. The built-in safety lock prevents unintended release during set-up and inspection, improving operator safety and process reliability. The vertical foot mounting makes positioning straightforward on plates or tooling blocks; standard fixing holes accommodate common workshop practice. These attributes minimise maintenance interventions and support continuous operation in small-series and high-mix production. Practical application scenarios and ergonomic benefits This compact clamp suits workshop benches, assembly fixtures and testing rigs where space is limited but secure holding is essential. The low mass (approx. 0.21 kg) combined with a 112 mm arm length supports lightweight jigs and rapid reconfiguration, making it a pragmatic choice for toolrooms and contract manufacturers. The clamp’s tactile lever action gives a confident, audible engagement that reduces operator uncertainty and supports faster cycle handling. As a reliable element within a fixture assembly, it contributes to predictable throughput and improved operator experience. Contact Metav Werkzeuge for ordering details and specification advice on the Kukamet Vertical clamp 212, supplied directly from Emmerich and ready for rapid dispatch. Technical data Article number: 212-2-D-L-C2 GTIN: 8680731501551 Manufacturer: Kukamet SKU: 212 ECLASS: 21041717 ETIM: EC011973 Facts Weight: 0.21 kg Arm length: 112 mm Maximum clamping force: 1,200 N Maximum holding force: 1,400 N Mounting: vertical foot Special features Material: zinc-plated steel Massive holding arm Safety lock mechanism Vertical-foot attachment Compact, lightweight design FAQ What is the maximum clamping force of this clamp? The Vertical clamp 212 delivers a maximum clamping force of 1,200 N and a holding force of 1,400 N, suitable for secure fixation in many jig and fixture applications. Can the clamp be installed on a customer fixture plate? Yes; the clamp is designed for vertical-foot mounting and can be fastened to standard fixture plates or tooling blocks used in assembly and testing. What material is used for the clamp finish and why does it matter? The device is zinc-plated, which provides corrosion resistance and extended service life in workshop environments where humidity or coolant exposure may occur. Is the clamp suitable for repetitive production cycles? The combination of a massive holding arm and a safety lock makes this clamp well suited to repetitive cycles, offering consistent engagement and reduced risk of unintended release. Which manufacturer and model should be quoted for orders or technical enquiries? Refer to Kukamet Vertical clamp 212, SKU 212-2-D-L-C2, for ordering and specification sheets. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp 1200N Thrust, Massive Holding Arm With Safety Lock, Zinc Plated - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that combines a 1,400 N holding force with a massive holding arm and safety lock for secure, repeatable workholding; order directly via Metav Werkzeuge or ask our consultants for application advice. Vertical clamp 211 by Kukamet — galvanised lever clamp with safety lock The Vertical clamp 211 is a compact galvanised lever clamp intended for light industrial and workshop fixtures, providing reliable vertical clamping where space is limited and repeatability matters. Galvanised steel for corrosion resistance Max holding force 1,400 N Compact 112 mm arm length Massive arm with safety lock Secure clamping that fits tight spaces The galvanised construction and robust design deliver consistent clamping with corrosion resistance that suits damp or mixed‑use workshop environments. With a max holding force of 1,400 N and a max pressing force of 1,200 N, the unit secures parts reliably during machining, assembly or testing operations. The horizontal foot mounting enables direct fixture attachment to benches or jigs, while the massive holding arm and integrated safety lock reduce the risk of accidental release and provide a safer production flow. This combination supports productivity gains through fewer re‑set operations and less downtime. Faster set‑up and repeatable results for production runs The lever mechanism and compact arm length of 112 mm allow quick engagement and disengagement, reducing cycle time for repetitive tasks. Designed as a lever clamp, the device gives predictable clamping behaviour and helps maintain positional accuracy across batches. The repeatability advantage is particularly relevant for short runs and fixtures where consistent force application saves time in adjustment and inspection. The visible, mechanical operation requires no consumables and supports straightforward maintenance routines, contributing to operational efficiency. Lightweight, durable component for fixture integration Weighing only 0.235 kg, this clamp adds minimal mass to fixtures while offering long service life thanks to its galvanised finish. The small footprint and horizontal foot fixing make integration into custom jigs or standard tooling plates simple, enabling compact fixture design without compromising stability. The combination of lightweight construction and robust components ensures that the clamp performs reliably under continuous use, while the galvanised surface extends service life in corrosive atmospheres. Speak with Metav Werkzeuge in Emmerich for tailored application advice and a competitive quotation for the Kukamet vertical clamp 211 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 211-2-D-L-C2 GTIN: 8680731501186 Eclass: 21041717 ETIM: EC011973 Measurements & capacities Arm length: 112 mm Max holding force: 1,400 N Max pressing force: 1,200 N Weight: 0.235 kg Materials & features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety lock FAQ What is the maximum holding force of this clamp? The Kukamet vertical clamp 211 provides a maximum holding force of 1,400 N, suitable for secure clamping in light industrial and workshop fixtures. Can the clamp be mounted to a bench or jig? Yes, the clamp uses a horizontal foot mounting that permits direct attachment to benches, jigs or tooling plates for stable fixture integration. Is the finish suitable for humid workshop environments? The galvanised steel finish protects the clamp from corrosion, making it appropriate for workshops where moisture or mixed‑use conditions are present. How compact is the clamping arm for tight fixtures? The arm length is 112 mm, giving a compact footprint that works well in confined fixture layouts without sacrificing clamping performance. Does the unit include a safety mechanism to prevent accidental release? The clamp features a massive holding arm and an integrated safety lock to reduce the risk of unintended opening and enhance operator safety. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Horizontal Base, Massive Holding Arm, 1,200N Thrust / 1,400N Hold - Kukamet
Taking advantage of a massive holding arm, a compact 112 mm arm length and robust clamping capacities of 1,200 N clamping force and 1,400 N holding force, this vertical clamp ensures dependable fixture retention and repeatable setups. Order the device directly via Metav Werkzeuge or consult our specialists for application-specific advice. Vertikalspanner 211 — Vertical clamp with 112 mm arm and 1,400 N holding force (Kukamet) Vertikalspanner 211 is a compact vertical lever clamp designed for secure fixturing in production and workshop environments, offering a robust holding arm and horizontal-foot mounting for flexible installation. Solid holding arm for reliable clamping 112 mm arm length for compact fixtures Holding force 1,400 N, clamping force 1,200 N Horizontal-foot mounting for bench fixture Dependable clamping power for repeatable production The lever-style design delivers predictable clamping force and holding force, specified at 1,200 N and 1,400 N respectively, which translates into consistent workpiece retention during machining or assembly. A lever clamp converts operator motion into a secure lock, reducing setup variability; this predictable behaviour lowers the risk of slippage and the need for rework. The mechanical specification gives planners and shop floor teams an objective basis for selecting the right fixture components for repeatable processes. Compact mounting for flexible fixturing and space savings With a 112 mm arm and a horizontal-foot mounting, the unit integrates into tight fixture layouts while keeping the clamping axis clear of the work envelope. The short arm length supports space-conscious jigs and reduces interference with adjacent tooling. At 0.234 kg the component is lightweight, simplifying manual positioning during assembly and allowing multiple clamps to be deployed without substantial additional mass on the fixture. These characteristics support efficient cell design and fast changeovers in small-series and batch production. Robust execution and workshop-ready finish Constructed with a massive holding arm and a black burnished finish, the clamp combines tactile solidity with an industrial appearance that masks surface wear in daily use. The design emphasises mechanical reliability and straightforward maintenance, making it suitable for demanding clamping tasks where visual and functional durability matters. The product from Kukamet (SKU B211-2-D-C2) fits standard clamping roles in tooling and fixturing, offering a compact solution where a dependable vertical clamp is required. Discuss the Kukamet vertical clamp 211 with Metav Werkzeuge to match the clamp to the fixture requirements and secure reliable supply from our Emmerich location Technical data SKU: B211-2-D-C2 Model: 211 GTIN: 8680731507669 Brand: Kukamet Core figures Arm length: 112 mm Max clamping force: 1,200 N Max holding force: 1,400 N Weight: 0.234 kg eClass: 21041717 ETIM: EC011973 Materials & features Material: black burnished finish Design: lever clamp Mounting: horizontal-foot Feature: massive holding arm FAQ What applications are suitable for this vertical clamp? The vertical clamp 211 is intended for fixture usage in machining, assembly and general workshop fixturing where compact, reliable vertical clamping is required; its lever design suits repeatable securing tasks. How do clamping force and holding force differ for this clamp? Clamping force (1,200 N) refers to the force applied to the workpiece during active clamping, while holding force (1,400 N) indicates the maximum retention capability; the 211 vertical clamp is specified for both values to aid fixture design. Can this clamp be mounted on custom plates or fixtures? Yes, the horizontal-foot mounting allows attachment to bench plates and custom fixtures; the compact 112 mm arm assists in tight layouts without impeding neighbouring tooling. Is the finish suitable for harsh workshop conditions? The black burnished finish provides an industrial, wear-masking surface appropriate for regular workshop use; the robust holding arm supports frequent handling and clamping operations. Which product identifier should be used when ordering or specifying the clamp? Use the SKU B211-2-D-C2 and the model designation 211 when specifying the Kukamet vertical clamp to guarantee the correct item is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Massive Holding Arm, 1,200N Push / 1,400N Hold, Galvanised - Kukamet
Take advantage of a compact, corrosion-resistant clamping solution that combines a massive holding arm with reliable clamping forces up to 1,400 N for repeatable workholding. Order the clamp via Metav Werkzeuge or consult our specialists for application advice. Kukamet Vertical toggle clamp 211 – Horizontal foot, massive holding arm The Vertical toggle clamp 211 is a zinc-plated lever clamp for secure workpiece holding in machining, assembly and fixturing, featuring a horizontal mounting foot and a robust 112 mm arm. Zinc-plated corrosion protection Robust, massiver holding arm Horizontal mounting foot for easy fixing Clamping force up to 1,400 N Dependable holding power for repeatable setups The clamp offers a measurable combination of clamping and pressing forces that supports consistent production processes. With a maximum holding force of 1,400 N and pressing capacity of 1,200 N, the device ensures components stay in place during machining or assembly, reducing rework and downtime. The lever mechanism converts operator input into secure fixture pressure, allowing faster cycle times and predictable results for batch work or single-piece manufacturing. Built for workshop conditions and long service life A zinc-plated finish provides corrosion resistance suitable for humid or mixed-environment workshops, extending service life without specialised maintenance. The robust holding arm minimises deformation under load, which supports dimensional stability of clamped parts over many cycles. These characteristics mean fewer interruptions for replacement and a lower total cost of ownership through dependable uptime. Compact mounting for flexible fixture design The horizontal mounting foot enables straightforward integration into benches, jigs or fixtures where a flat base is required. The 112 mm arm length balances reach and compactness, making the clamp suitable for confined setups while still clearing tooling and allowing safe access to the workpiece. The small mass (approx. 0.234 kg) keeps added inertia low, useful for automation or manual stations where weight on the fixture must be minimised. Fast implementation and clear specification The clamp’s simple lever action and clear mechanical parameters make specification and procurement straightforward for engineers and buyers. Supplied under a known SKU and GTIN, the component integrates into bills of materials and inventory systems without ambiguity. For customers new to clamping technology, the functional design and defined force ratings simplify decision-making and support consistent results across recurring jobs. Contact Metav Werkzeuge to discuss the Kukamet 211 for your application or to request a specification quote; call +49 2822 7131930 or email info@metav-werkzeuge.com and benefit from Metav’s precision know-how and European distribution. Technical data Article number: 211-2-D-C2 GTIN: 8680731501155 Manufacturer: Kukamet Facts Arm length: 112 mm Max pressing force: 1,200 N Max holding force: 1,400 N Weight: 0.234 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Lever-style (toggle) clamp Suitable for fixture and jig applications FAQ What materials is this clamp suitable for? The Kukamet Vertical toggle clamp 211 is designed as a general-purpose fixture clamp; its zinc-plated steel construction makes it suitable for typical metal and mixed-material workshop environments where a sturdy mechanical hold is required. How much clamping force does the clamp provide? This model delivers up to 1,400 N holding force and a pressing capacity of 1,200 N, providing a reliable benchmark for securing parts during machining or assembly. Can the clamp be mounted on machine tables or jigs? Yes, the horizontal mounting foot allows the clamp to be fixed to jigs, benches or machine tables, enabling easy integration into bespoke fixtures or standard workstations. Is the arm length suitable for tight spaces? With a 112 mm arm, the clamp balances reach and compactness, making it appropriate for confined setups while maintaining sufficient clearance for tooling and handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Solid Holding Arm And Safety Locking, 1400N Holding Force - Kukamet
Robust vertical clamping with a solid holding arm and integrated safety lock provides reliable workholding for compact fixtures; the 112 mm arm and blued finish ensure durable, repeatable performance. Order the Kukamet 212 Vertical Clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 212 Vertical Clamp — 112 mm arm, safety lock The Kukamet 212 Vertical Clamp is a compact vertical-foot clamp designed for stable, repeatable clamping in assembly and light machining fixtures. Vertical foot for stable mounting Massive holding arm for secure grip Safety locking mechanism included 112 mm arm reach, compact design Consistent force for repeatable setups The clamp delivers dependable holding capacity with a clear specification for both pressing and clamping operations. With a maximum holding force of 1400 N and a maximum pressing force of 1200 N, the device is suited to repetitive production tasks where process stability matters. The compact construction combined with a 112 mm arm length allows a short reach while maintaining effective force transmission, which reduces cycle variability and supports predictable fixture behaviour in small- to medium-batch manufacture. Built for secure, safe operation Safety and longevity are prioritised through a solid holding arm and an integrated safety lock, which prevents unintentional release under load. The bolted vertical-foot mounting ensures a rigid interface to the clamping plate or jig, enabling secure, vibration-resistant positioning during light machining or assembly. The blued finish protects contact surfaces against corrosion while maintaining a straightforward aesthetic that signals workshop-grade durability. Easy integration and low-maintenance performance The compact form factor and vertical mounting style make the component straightforward to incorporate into existing jigs and fixtures without major redesign. At just 0.21 kg, the unit is lightweight yet sturdy, reducing added mass on moveable fixtures. The mechanism is designed for straightforward upkeep: periodic inspection and cleaning of the pivot and lock are sufficient to retain clamping accuracy, helping to keep downtime and servicing effort to a minimum. Where this clamp performs best This vertical clamp is particularly effective in production and repair benches where secure, repeatable clamping of workpieces is required in constrained spaces. The combination of a massive holding arm and a reliable lock makes it suitable for fixture plates, assembly rigs and other areas where quick, positive clamping is needed without sacrificing safety. The clear force ratings support selection and verification in quality-controlled environments, enabling planners to match clamping capacity to the task at hand. For secure, compact workholding solutions, request a specification sheet or a tailored quote from Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for fast technical advice and reliable supply. Technical data Article number: B212-2-D-L-C2 ETIM: EC011973 ECLASS: 21041717 Manufacturer: Kukamet Numbers Arm length: 112 mm Weight: 0.21 kg Max. clamping force: 1400 N Max. pressing force: 1200 N Special features Mounting: vertical foot Finish: blued (blackened) Massive holding arm Integrated safety lock Asset: product image and catalogue PDF available FAQ What forces can the clamp withstand during operation? The clamp provides a maximum holding force of 1400 N and a maximum pressing force of 1200 N, making the Kukamet 212 suitable for secure clamping in many assembly and light machining applications. Is the clamp suitable for welded or plated fixtures? Yes. The vertical-foot mounting of the Kukamet 212 is compatible with welded or plated fixture plates; secure bolting and correct torque values are recommended for reliable performance. How long is the arm and how much space does it require? The arm reach is 112 mm, offering a compact footprint that is well suited to constrained setups and smaller fixtures without compromising clamping effectiveness. What finish does the clamp have and how does it affect maintenance? The unit is supplied with a blued finish, which provides basic corrosion resistance and simplifies routine maintenance—regular cleaning and occasional lubrication of the pivot will ensure long service life. Can the clamp be used in production with frequent cycles? Yes, the robust construction with a massive holding arm and safety locking mechanism is designed for repetitive use; scheduled inspections will keep cycle reliability high. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Vertical Clamp With Solid Holding Arm, 1.2kN Thrust, Galvanised - Kukamet
Take advantage of the combination of robust holding capability, corrosion-resistant construction and a compact mounting design for reliable jigs and fixtures; order directly through Metav Werkzeuge or consult our advisors for integration advice. Vertical clamp 212 by Kukamet — galvanised, solid holding arm The Vertical clamp 212 is a compact vertical lever clamp intended for fixed-position workholding in jigs and fixtures, combining a 112 mm arm with a high holding force for secure, repeatable clamping. Galvanised finish for corrosion resistance Solid 112 mm holding arm Up to 1,400 N holding force Vertical-foot mounting for stable attachment Robust clamping that keeps workpieces steady under load With a maximum holding force of 1,400 N and a pressing force of 1,200 N, this lever-style clamp delivers consistent pressure where retention and stability matter most. The mechanical advantage of the lever reduces operator effort while preserving clamping reliability; in practice this means fewer re-takes and less downtime during machining, assembly or inspection sequences. The precise force specification supports predictable fixture design and helps maintain process tolerances across repeated cycles. Workshop-ready construction for long service life The clamp is finished in galvanised steel and incorporates a solid holding arm, providing resistance to corrosion and mechanical wear in routine workshop environments. The robust construction translates directly into lower replacement rates and reduced maintenance intervals. For production environments where exposure to coolant, humidity or general handling is routine, the treated surface and sturdy arm help secure consistent performance over time. Compact form factor for efficient fixture layouts A 112 mm arm and vertical-foot mounting allow the clamp to be integrated into confined fixture spaces without sacrificing leverage or stability. The lightweight construction (0.228 kg) minimises added mass on moving fixtures and makes positioning within multi-clamp arrangements straightforward. This compact footprint supports denser clamping patterns on pallets and jigs, enabling efficient use of table space and simplifying toolpath planning for automated operations. Simple mechanism for dependable, low-maintenance operation The lever clamp design relies on a tried-and-tested mechanical principle that is easy to install and maintain. Few wear parts and a straightforward geometry mean inspections and replacements are quick, supporting continuous production demands. As a practical workholding component, the clamp offers dependable repeatability and integrates cleanly into both manual and semi-automated setups, making it a pragmatic choice for workshops seeking durable, no-fuss clamps for everyday use. For corrosion-resistant, workshop-ready clamping from Kukamet, contact Metav Werkzeuge to discuss fixture integration or request the technical datasheet — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 212-2-D-C2 GTIN: 8680731501520 Brand: Kukamet Key figures Weight: 0.228 kg Arm length: 112 mm Holding force: 1,400 N Pressing force: 1,200 N eCl@ss: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting: vertical foot Solid holding arm Massiver Haltearm (solid holding-arm design) FAQ What holding force does the Vertical clamp 212 provide? The Vertical clamp 212 offers a maximum holding force of 1,400 N and a pressing force of 1,200 N for secure retention. Is the clamp suitable for use in humid or coolant-exposed environments? The galvanised finish on the Kukamet clamp provides corrosion resistance suitable for typical workshop and coolant-exposed conditions. How is the clamp mounted in a fixture? The clamp uses a vertical-foot mounting to secure it to plates or fixture bases, allowing stable attachment in confined spaces. What is the arm length and how does it affect fixture design? The arm length is 112 mm; this compact reach supports dense clamping arrangements and simplifies positioning within jigs. Which SKU should be referenced when ordering replacement units? Reference SKU 212-2-D-C2 for this Vertical clamp 212 from Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
112mm Workholding Angle With 15x ER40 Collets Set, 15 Kg Max Load - Vertex
Take advantage of the combination of high repeatability (0.01 mm), a 15-piece ER-40 collet set and a compact footprint for stable, efficient fixturing on milling machines; order the unit directly via Metav Werkzeuge or consult our specialists if clarification is required. VUA-ER40 Angle Plate with 112 mm diameter and 15-piece ER-40 collet set — Vertex The VUA-ER40 is an angle plate designed to provide secure part fixturing and repeatable clamping for workshop and light production machining tasks. 112 mm diameter for stable clamping 15-piece ER-40 collet set included Precision manufacturing with 0.01 mm accuracy Max load 15 kg for heavy-duty fixturing Engineered for reliable workshop fixturing and repeatability The clamping assembly is engineered to deliver consistent positioning and rigid support for small- to medium-sized components. With a 112 mm diameter contact face and a robust construction, the fixture resists deflection under load, helping to maintain machining tolerances. The documented 0.01 mm accuracy reflects the manufacturing standard of the component and provides a verifiable basis for quality-critical operations. As a consequence, set-up times are reduced and the risk of rework is lowered, supporting steady production throughput. Integrated ER-40 collet set for flexible mounting of workpieces Included with the angle plate is a 15-piece ER-40 collet set, covering a wide range of shaft and tool diameters (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26 mm). The collection of collets enables direct gripping of turned parts, mandrels and tooling without additional adapters, which simplifies fixturing and reduces ancillary inventory. ER-40 is an established clamping standard; its high clamping force and concentricity make it suitable for operations where runout and concentricity matter. Precision and stability that support productive machining Mass and geometry contribute to stability: the assembly weight of 14 kg and compact dimensions (180 x 110 x 181 mm) create a low centre of gravity and minimise vibration transfer during cutting. The clearly defined max. load of 15 kg guides selection for heavier workpieces while preserving positional accuracy. These measurable characteristics help planners and machine operators compare fixtures objectively and choose the right tool for specific machining tasks. Streamlined procurement and workshop integration Supplied as a complete set, the angle plate plus collet assortment reduces the need for multiple separate purchases and simplifies shelf stocking. The configuration is particularly suitable for job shops and maintenance departments that require quick reconfiguration between jobs and reliable repeatability across batches. Availability through Metav Werkzeuge adds the assurance of European distribution and quality control from the Emmerich facility, helping to shorten lead times and ensuring parts are delivered under a consistent quality filter. Request the VUA-ER40 from Metav Werkzeuge for delivery from Emmerich, or contact our consultants via info@metav-werkzeuge.com or +49 2822 7131930 for application advice and configuration support Technical Data Article number: VUA-ER40 GTIN: 4061905083761 Manufacturer: Vertex Facts Dimensions: 180 x 110 x 181 mm Diameter: 112 mm Weight: 14 kg Accuracy: 0.01 mm Max. load: 15 kg Special features Set: 15x ER-40 collets (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26) Designed for fixturing and precise part clamping Compact footprint for flexible machine mounting FAQ What collet sizes are included with the set? The set contains 15 ER-40 collets in the following sizes: 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25 and 26 mm, supplied as a complete ER-40 collet set. Can the assembly handle larger workpieces? The angle plate is rated for a maximum load of 15 kg; for heavier components a dedicated heavy-duty fixture should be selected to maintain the specified accuracy. What level of positioning accuracy can be expected in practice? The component is manufactured to an accuracy of 0.01 mm, providing high repeatability for precise machining tasks when used with appropriate set-up procedures and machine capabilities. Is the VUA-ER40 suitable for production or only for workshop use? The VUA-ER40 is suitable for both workshop and light production environments where compact, repeatable fixturing and the included ER-40 collet range meet the application requirements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
114,5mm Centre Point HVL Pro MK4 Extended Live Centre 60° Runout 0.005mm, 3800 rpm - RÖHM
Robust centring performance with measurable stability: the HVL Pro MK4 delivers a 60° tip and runout of ≤ 0.005 mm, engineered for demanding turning tasks under loads up to 500 kg. Benefit from a MK4 taper for simple integration and a 114.5 mm overhang for flexible setup. Order the centring point directly via Metav Werkzeuge or contact our consultants for tailored application advice. HVL Pro MK4 centring point (Pro precision version, extended running tip) – 60° tip, MK4 shank – RÖHM HVL Pro MK4 centring point — a pro precision execution with an extended running tip, designed for heavy-duty turning and high-accuracy centring in workshop and production environments Precision runout ≤ 0.005 mm Supports workpiece weight up to 500 kg MK4 shank, 31.267 mm diameter 60° tip angle for reliable centring Maintain tolerances with measurable precision The primary advantage of this live centre is its repeatable accuracy: a maximum runout deviation of 0.005 mm ensures parts remain within tight tolerances cycle after cycle. The 60° tip geometry concentrates clamping force for secure centring, while the 53 mm tip length supports consistent contact with the workpiece. Such measurable performance reduces rework and inspection time, making the component a pragmatic choice where dimensional conformity is critical. Stable machining under heavy loads Designed for robust operation, the unit is specified for a maximum workpiece weight of 500 kg and a permitted speed up to 3,800 rpm, combining load capacity with controlled rotational performance. The 68.5 mm housing diameter and a total overhang of 114.5 mm contribute to mechanical stability, reducing vibration and improving surface finish. These characteristics translate into fewer rejects and steadier cycle times on medium to heavy turning applications. Easy integration and secure mounting on standard spindles Fitted with a MK4 Morse taper and a shank diameter of 31.267 mm, the centring point installs quickly in machines accepting Morse taper 4 interfaces. The overall weight of 2.3 kg and a compact housing mean minimal disturbance to balance while offering robust support. Compatibility with common machine spindles and straightforward mounting simplifies changeovers and shortens setup time, which benefits throughput and machine utilisation. Proven partner for workshop reliability Beyond technical performance, the product is backed by Metav’s positioning as a supply and quality filter for the European market: a broad stock range from Emmerich, reliable logistics and a history of trusted service support consistent operations. The combination of high-precision mechanics and dependable distribution helps maintain continuous production flow and reduces procurement complexity for workshops and small-scale manufacturers. For precise centring under heavy load, request the RÖHM HVL Pro MK4 centring point from Metav Werkzeuge to confirm fitment and delivery from our Emmerich hub Technical Data Article number: 4000832083NW Product name: HVL Pro MK4 centring point (Pro precision version, extended running tip) Manufacturer: RÖHM Product type: Centring point Core dimensions & performance Diameter: 32 mm Overhang: 114.5 mm Tip angle: 60° Tip length: 53 mm Housing diameter: 68.5 mm Shank diameter: 31.267 mm Weight: 2.3 kg Max. workpiece weight: 500 kg Runout deviation max.: 0.005 mm Max. speed: 3,800 rpm Shank type: MK4 Packaging unit: 1 Special features Pro precision execution Extended running tip Suitable for heavy-duty turning Designed for repeatable centring accuracy FAQ How precise is the centring performance? The HVL Pro MK4 centring point achieves a runout deviation of max. 0.005 mm, providing the repeatability required for tight-tolerance turning operations; SKU 4000832083NW identifies this specification. What maximum workpiece weight can be handled? This centring point is specified for workpiece masses up to 500 kg, enabling stable support for medium and heavy components during turning operations. Which spindle interface is required? The unit uses a MK4 (Morse taper 4) shank with a diameter of 31.267 mm, suitable for machines accepting MT4 connections and ensuring straightforward integration. Is the live centre suitable for higher speeds? The component is rated for operation up to 3,800 rpm; for applications beyond this speed, rotational dynamics and machine compatibility should be reviewed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
114mm Extension Lever Metal Lever Clamp Accessory - Kukamet
Take advantage of a compact, metal design and precise dimensions to extend clamping reach without adding unnecessary bulk; the combination of a 114 mm height, metal construction and low weight supports efficient, repeatable clamping operations. Order the extension lever directly via Metav Werkzeuge or consult our advisors for compatibility details. Extension lever 220 – compact metal accessory for lever clamps (Kukamet) Extension lever 220 offers a practical reach extension for lever clamp setups, designed for mechanical workshops and industrial fixtures. *Compact 114 mm extension lever *Robust metal construction *Lightweight at 0.15 kg *Compatible with lever clamps Extend reach while preserving balance and control The extension lever provides a measured increase in reach without compromising handling or balance. With a height of 114 mm, a width of 18 mm and a thickness of 10 mm, the geometry is tuned for predictable leverage and stable engagement in clamping systems. The moderate mass (0.15 kg) keeps dynamic loads low, which reduces the risk of unwanted movement during cycle changes and contributes to consistent clamping performance. This precise dimensional profile supports quick integration into existing fixturing where space and repeatability matter. Straightforward compatibility with lever-clamp assemblies Designed specifically for lever-clamp applications, the component fits into common clamping arrangements used in jigs and fixtures. The simple profile and metal construction ensure mechanical compatibility with standard lever spanners while enabling secure fastening and reliable force transmission. Clear numeric specifications allow engineers to verify fitment in CAD or shop drawings before installation, supporting efficient procurement and a short validation phase for production or repair tasks. Durable construction for dependable workshop service Made from solid metal, the extension accessory delivers a robust service life under typical workshop conditions. The straightforward design minimises failure modes and simplifies routine inspection, which helps to reduce downtime and maintenance intervals. Supplied by Kukamet and distributed through Metav’s European quality channel, the part benefits from a consistent quality check to match industrial expectations. The result is a pragmatic, cost-effective component that supports continuous operation in small-batch or high-mix manufacturing environments. Contact Metav Werkzeuge for availability and tailored advice on the Kukamet extension lever 220; email info@metav-werkzeuge.com or call +49 2822 7131930 for fast support and stock information Technical data Article number: 220-6-06 GTIN: 4061905079528 Manufacturer: Kukamet eClass: 21170613 Facts Width: 18 mm Thickness: 10 mm Height: 114 mm Weight: 0.15 kg Special features Material: Metal Category: Spanner Application: for lever clamps FAQ What is the primary purpose of the extension lever? The extension lever is intended to extend the effective reach of lever-clamp assemblies, enabling secure clamping in setups where additional clearance is required. Which materials is the part made from and how does that affect durability? The component is made from metal; this solid construction provides predictable stiffness and wear resistance suitable for repetitive workshop use. Can the extension accessory be used with different lever clamp models? Compatibility depends on clamp geometry; the extension lever's dimensions (114 mm height, 18 mm width, 10 mm thickness) allow assessment against various lever-clamp designs before selection. What identifies the correct SKU for ordering? Order using SKU 220-6-06; this reference matches the Kukamet extension lever described in the technical data. Is the piece suitable for repetitive industrial cycles? Yes, the simple metal design and precise dimensions make it well suited for repeated clamping cycles in production and assembly applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com