Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
13mm Flat Washer DIN 6340 For M12 Screws, 35mm Outer Diameter x 5mm Thick - AMF
Take advantage of a standardised fastening solution that ensures consistent load distribution and straightforward inventory management: the washer is manufactured to DIN 6340, sized for M12 fastenings with a 13 mm bore and a 5 mm thickness, delivering reliable performance in assembly processes. Order the part directly via Metav Werkzeuge or consult our specialists for compatibility checks. U-washer DIN 6340 for M12 screws, 13 mm bore — AMF The U-washer DIN 6340 is a standard-compliant washer designed to distribute clamping loads for M12 fastenings in industrial and workshop assemblies. Standardised to DIN 6340 Suitable for M12 fastenings 13 mm bore for precise fit 5 mm thickness for stable support Consistent assembly results through standard compliance Conformity with DIN 6340 ensures consistent geometry and repeatable behaviour in series assembly, which reduces variability during torqueing and joint pre-loading. The standardised inner diameter of 13 mm corresponds to the nominal thread size, so the bore clears M12 threads without play that would compromise clamping. Where process reliability is required, such as in fixture building or machine assembly, the standard designation provides a clear basis for procurement and quality control. The item is listed under SKU 4000833438NW for traceability in stock systems. Mechanical benefits from defined dimensions A washer with an outer diameter of 35 mm and a thickness of 5 mm gives a predictable contact area and stiffness under load; this translates into reduced localised material deformation and improved joint life compared with undersized washers. The specified thickness helps prevent subsidence under high compression and keeps the clamped parts aligned. In practical terms, using a washer of the stated dimensions supports consistent clamp force transmission and lowers the risk of fastener loosening in dynamic or thermal cycling environments. Practical handling and workshop integration The component is intended for straightforward stocking and use in maintenance and production settings. Supplied in single units, the part can be logged into inventory systems and matched to M12 bolt assortments or fitting kits. As a basic fastening element, it integrates with established assembly routines and can be combined with standard nuts and bolts without additional adjustments. For technicians less familiar with specification sheets: the bore is the central hole size, the outer diameter indicates the load-bearing ring, and the thickness relates to the washer’s stiffness — these three parameters together determine fit and performance. Contact Metav Werkzeuge for supply and technical advice on AMF U-washers; call +49 2822 7131930 or email info@metav-werkzeuge.com for delivery from Emmerich and assistance with application suitability Technical data Article number: 4000833438NW Label: U-Scheibe DIN 6340 f.Schrauben M12 Bohrungs-D.13mm AMF Manufacturer: AMF Product type: Washer Suitable for: M12 Packaging unit: 1 Numeric data Bore diameter D1: 13 mm Outer diameter D2: 35 mm Thickness S: 5 mm Standard: DIN 6340 Special features Standard-compliant geometry Designed for load distribution in M12 joints Single-unit packaging for inventory control FAQ Is this washer suitable for M12 bolts? Yes. The washer is specified for M12 fastenings and features a 13 mm bore matched to that thread size. What does DIN 6340 mean for performance? DIN 6340 denotes standardised washer geometry; compliance ensures consistent dimensions and predictable behaviour under clamping loads for the AMF washer. How do the dimensions affect joint stability? The combination of 35 mm outer diameter and 5 mm thickness increases contact area and stiffness, which helps maintain clamp force and reduce material indentation. Can the washer be used in structural assemblies with dynamic loads? Yes. The defined thickness and diameter provide improved resistance to deformation under cyclic loading compared with thinner, smaller washers. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Magnet Flat Gripper H4.5 No Threaded Insert Holding Force 10N - TECWERK
Take advantage of a compact, heat-resistant design combined with reliable holding power for repeatable fixturing and assembly tasks. Order the magnetic component directly via Metav Werkzeuge or consult the specialists for compatibility and supply from Emmerich. Magnetic flat gripper D13 x H4.5 mm without threaded sleeve – 10 N holding force (TECWERK) A Magnetic flat gripper D13 x H4.5 mm without threaded sleeve designed for precise, low-profile holding in assembly, jigs and fixture applications where a compact and heat-tolerant magnetic base is required Hard ferrite construction for corrosion resistance 10 N maximum holding force Compact Ø13 x H4.5 mm flat design Rated for up to 200 °C peak temperature Precise, repeatable holding in a compact form The flat magnetic base combines a hard ferrite core with a low-profile geometry to deliver consistent 10 N holding force in a space-saving package. The compact Ø13 x H4.5 mm footprint enables secure support of small ferrous parts within tight assemblies and precision jigs. The magnet’s flat design simplifies placement on planar surfaces and reduces unwanted protrusion, which benefits automated stations and manual workstation setups alike. Magnetic behaviour is predictable, aiding process planning and fixture repeatability. Thermal resilience for elevated-process applications Specified with a recommended operating temperature of up to 100 °C and a maximum peak tolerance of 200 °C, the component maintains magnetic stability during brief exposure to elevated temperatures. This characteristic supports short-duration thermal processes such as soldering or pre-heating sequences where a temporary magnetic hold is required. The temperature ratings allow integration into workflows that include heating steps, while the hard ferrite material ensures dimensional stability and long-term performance under typical workshop conditions. Easy integration and inventory efficiency The version without threaded sleeve provides a flush contact surface for direct mounting or embedding into fixtures where external threading is undesired. Supplied in packing unit 10, the item suits small-series production and maintenance replenishment without excessive stock. The plain design minimises machining effort for bespoke fixture blocks and simplifies replacement in service scenarios. Material choice and compact format contribute to a cost-effective solution for securing lightweight ferrous components during machining, inspection or assembly steps. Contact Metav Werkzeuge for specification support and supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832231NW SKU: 4000832231NW Product type: Magnetic flat gripper Brand: TECWERK Material: Hard ferrite Facts Diameter: 13 mm Height: 4.5 mm Holding force (max): 10 N Recommended operating temperature: up to 100 °C Maximum operating temperature (peak): 200 °C Packing unit: 10 Special features Design: Flat gripper without threaded sleeve Application: Holding / fixturing of ferrous parts Construction: Sintered ferrite magnet Usage: Suitable for compact fixtures and assembly jigs FAQ What is the maximum holding force of this magnetic flat gripper? The magnetic flat gripper offers a maximum holding force of 10 N, suitable for securing small ferrous components in fixtures and assembly stations. Which material is the magnet made from and what are the benefits? The unit is made from hard ferrite, providing good thermal stability and corrosion resistance for standard workshop environments. Can the gripper be used during heating operations? Short-term exposure is possible: recommended use is up to 100 °C with a peak tolerance of 200 °C for brief thermal steps. Is the product supplied with a threaded sleeve for fastening? This version is without threaded sleeve, offering a flush, low-profile contact surface for direct mounting or embedding. What is the packing quantity for ordering and which SKU applies? The item is supplied in a packing unit of 10 and is listed under SKU 4000832231NW (TECWERK). Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
13mm Magnetic Stub Gripper Smooth 12N Holding Force AlNiCo 500 - TECWERK
Compact, heat-resistant magnetic gripping for small parts: the combination of an AlNiCo 500 core, a compact 13 mm diameter and a 12 N holding force ensures secure positioning with minimal footprint — ideal for assembly jigs and inspection fixtures. Order the magnetic rod gripper directly via Metav Werkzeuge or consult the specialists for application advice. Magnetstabgreifer D13xH18mm glatt — magnetic rod gripper with AlNiCo 500 and 12 N holding force (TECWERK) A Magnetstabgreifer D13xH18mm glatt designed as a compact magnetic gripper for locating and holding small ferromagnetic components in elevated-temperature environments. AlNiCo 500 magnetic alloy core 12 N maximum holding force Smooth finish for gentle contact Rated for use up to 450 °C Precise holding with a compact footprint for production use The compact magnetic pin is built around an AlNiCo 500 magnet, which provides a stable magnetic field in a small volume and is especially suitable where consistent attraction is required over time. With a 13 mm diameter and a 18 mm overall height, the component is sized for tight assemblies and fixtures; the 12 N holding rating indicates the order of force available for locating or holding small components. The h6 fit tolerance and the additional dimension h: 7 mm are specified for accurate shaft fits and predictable positioning when integrated into jigs or carriers. This concise combination of dimensions and material makes the unit effective where space is limited but repeatability is essential. Reliability under heat and consistent performance in batches The magnetic gripper is specified for an operating temperature up to 450 °C, a parameter that allows the device to be deployed in processes with elevated thermal exposure without rapid demagnetisation typical of softer magnet grades. The smooth finish reduces mark risk on delicate parts and enables controlled contact, while the chosen magnet alloy maintains useful force at higher temperatures. For production planners and quality engineers, this translates into fewer process interruptions and consistent locating behaviour across repeated cycles, supporting process stability and predictable fixture performance. Integration and mounting advantages for workshop and industrial setups Sized for direct incorporation into fixtures, the gripper’s standardised h6 tolerance supports interchangeability and precise axial positioning when used in shafts or bores. The compact form factor and clearly defined 7 mm auxiliary dimension simplify CAD placement and mechanical design, reducing integration time. The robust construction and defined mechanical data mean the component can be specified in assembly instructions and procurement lists with confidence, enabling a transparent supply chain and smoother implementation on the shop floor. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK magnetic rod gripper into fixtures and jigs, or request support for specifying tolerances and thermal requirements — Metav Werkzeuge is ready to assist. Technical data Article number: 4000832253NW Item: Magnet rod gripper D13×H18 mm, smooth, holding force 12 N Numbers / core technical data Diameter: 13 mm Height: 18 mm Holding force (max): 12 N Additional dimension h: 7 mm Fit tolerance: h6 Operating temperature: up to 450 °C Packaging unit: 1 Special features / materials Material: AlNiCo 500 Smooth version (glatte Ausführung) Manufacturer brand: TECWERK SKU: 4000832253NW FAQ Is the magnetic rod gripper suitable for elevated-temperature operations? The Magnetstabgreifer D13xH18mm glatt is specified for use up to 450 °C, which supports applications with higher thermal exposure while retaining functional magnetic performance. What is the maximum holding force and what does it imply? The device offers a 12 N maximum holding force; this value describes the peak attractive force under defined conditions and is intended for locating and holding small ferromagnetic parts rather than heavy load-bearing tasks. Which material is used for the magnet and what are its benefits? The rod contains AlNiCo 500, a high-temperature-capable magnetic alloy that provides stable magnetic performance at elevated temperatures and good long-term stability in repeated thermal cycles. How does the fit tolerance affect integration into fixtures? The h6 fit tolerance ensures a precise shaft fit and repeatable axial positioning when the gripper is installed in bores or holders, simplifying fixture design and interchangeability. Can the smooth finish be used on delicate surfaces? The smooth finish is intended to minimise marking and enable gentler contact with components; it suits applications where surface protection is a consideration. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
13mm Spannzange ER 25 Rundlaufgenau 5 µm L40 D33 Spanndurchmesserüberbrückung Nennmaß minus 1,0 mm - TECWERK
Fehlinformation: Widersprüchliche Typangaben erkannt (ER 25 versus ER 32). Bitte Daten prüfen und korrigieren, damit eine korrekte Produktbeschreibung erstellt werden kann, da ungenaue oder fehlerhafte Angaben zu Missverständnissen führen können und die Qualität der Produktinformationen sowie die Zufriedenheit der Kunden beeinträchtigen könnten. Eine sorgfältige Überprüfung der Typangaben ist daher unerlässlich, um sicherzustellen, dass die bereitgestellten Informationen sowohl präzise als auch konsistent sind und den Anforderungen der Nutzer entsprechen. Nur durch eine genaue und fehlerfreie Datenpflege kann gewährleistet werden, dass die Produktbeschreibung den tatsächlichen Spezifikationen entspricht und keine Verwirrung entsteht.
13x22mm Coupling M8x1.25mm Thread, Precision Mechanical Joint - Vertex
Take advantage of the compact dimensions and standard M8x1.25 thread to speed up assembly and reduce part mass in confined installations; the lightweight design and Vertex quality ensure consistent handling and simple stocking via Metav Werkzeuge — order directly through Metav Werkzeuge or consult the team for procurement guidance. Vertex coupling 2612M – compact coupling with M8x1.25 thread A Vertex coupling designed for mechanical connections in confined assemblies, offering a compact 13 x 22 mm footprint and compatibility with standard M8x1.25 threaded components. Compact 13 x 22 mm footprint Compatible with M8 x 1.25 thread Lightweight at 0.033 kg Technical drawing and detail images available Space-saving form that keeps assemblies compact and predictable The compact 13 x 22 mm format reduces the installation envelope, enabling denser layouts on fixtures and jigs without compromising service access. With a mass of 0.033 kg, extra rotating or moving masses are minimised, which can contribute to lower inertia in dynamic assemblies. The standard M8x1.25 specification denotes a metric thread with a 1.25 mm pitch, meaning the part will mate reliably with common M8 fasteners and tapped holes. This combination of small footprint and standard threading supports faster component selection and simpler inventory management, while the clear dimensional data aids in collision checks and CAD planning. Designed for straightforward integration and dependable mechanical connection The coupling functions as a mechanical connector for threaded interfaces, designed to join components where a compact threaded junction is required. Compatibility with the M8x1.25 thread ensures interchangeability with widely used fasteners, reducing the need for bespoke machining. The visible technical drawing and detailed images allow quick verification of fit and orientation before assembly. Where thread engagement is critical, matching the mating thread quality and ensuring appropriate tightening practice secures a consistent connection; the compact geometry also simplifies access with standard hand tools, reducing assembly time and the potential for rework. Procurement reliability and workshop-ready supply from Metav Sourcing the part through established channels reduces lead-time risk for production and maintenance operations. Metav Werkzeuge operates as a quality filter for the European market, providing a central supply point for precision parts and workshop essentials. Stocking a concise, standardised coupling such as this supports predictable reordering and helps maintain continuity in production processes. The Vertex name indicates manufacturer origin for traceability, while the available technical files support purchasing decisions and quality checks during incoming inspection. Secure the Vertex coupling 2612M for your next compact assembly via Metav Werkzeuge — contact Metav Werkzeuge in Emmerich for order placement or procurement advice and benefit from their European stock and quality filter. Technical data SKU: 2612M GTIN: 4061905084799 eClass: 21131711 Facts Size: 13 x 22 mm Thread: M8 x 1.25 mm Weight: 0.033 kg Special features Designation: Coupling Brand: Vertex Technical drawing and detailed images available FAQ What thread does the coupling use? The coupling is specified with an M8 x 1.25 thread, compatible with standard M8 fasteners and tapped holes. What are the external dimensions of the part? External dimensions are 13 x 22 mm, suitable for installations with limited space. How much does the coupling weigh? The coupling weighs 0.033 kg, approximately 33 grams. Are technical drawings available for fit verification? Yes, technical drawings and detailed images are provided for the coupling 2612M to assist with fit checks and planning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
14.2mm Countersink DIN 6319G 120° Cone Angle For M12 Screws, D4 36 H3 6 - AMF
Benefit from precise joint alignment, conformity to DIN 6319G and a defined 120° cone angle for consistent seating; order the AMF conical seat directly via Metav Werkzeuge or consult our specialists for application advice. Conical seat DIN 6319G (AMF) — Cone washer for M12, 14.2 mm bore, 120° Conical seat DIN 6319G — a seating washer designed to provide accurate axial alignment and uniform load transfer for M12 bolted connections in industrial and workshop assemblies Conforms to DIN 6319G standard Fits M12 screws with 14.2 mm bore 120° cone angle for precise seating Ensured alignment and reduced joint stress A conical seating washer manufactured to the DIN 6319G specification provides a controlled contact geometry that reduces eccentric loading and improves clamp distribution. The defined 120° cone angle generates a repeatable seating surface that minimises wobble and localised stress concentrations. In practice, the standardised geometry supports consistent torque-to-preload behaviour and contributes to longer joint lifetime, making the component suitable where reliable clamping and repeatability are required. Straightforward compatibility with common fasteners Designed for use with M12 fasteners, the item features a 14.2 mm bore and defined assembly dimensions (D4: 36 mm; H3: 6 mm) that allow immediate integration without additional machining. The larger outside diameter ensures an adequate bearing surface while the bore clearance accommodates standard M12 bolt shanks. These measurable values permit quick verification during inventory or assembly planning and simplify part selection for routine maintenance or series production. Workshop-ready standard component for industrial use Produced under the AMF designation, this cone washer serves as a compact, standardised solution for a wide range of bolted connections in mechanical engineering and maintenance operations. Its adherence to an established norm supports quality control processes and eases procurement decisions. Supplied in single units, the part is suitable for spare-part provisioning or targeted replacements in maintenance kits and assembly lines. Contact Metav Werkzeuge for rapid supply and specification advice on AMF conical seats; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833448NW Standard: DIN 6319G Brand: AMF Type: Conical seat (cone washer) Dimensions & core data Bore / D2: 14.2 mm Outside diameter / D4: 36 mm Height / H3: 6 mm Cone angle: 120° Suitable for: M12 Design & special features Conical seating washer Pack unit: 1 Label: Kegelpfanne DIN 6319G for screws M12, bore dia. 14.2 mm, cone angle 120° FAQ Is the component suitable for standard M12 bolts? Yes. The AMF conical seat is designed for M12 fasteners and features a 14.2 mm bore to provide appropriate clearance for M12 bolt shanks. What standard does this seating washer comply with? The part conforms to DIN 6319G, ensuring standardised geometry and reproducible seating performance for bolted joints. Which dimensions are relevant when checking fit? Key dimensions are the bore (14.2 mm), outside diameter (36 mm) and height (6 mm); these determine compatibility and bearing surface in assemblies. How does the 120° cone angle affect joint behaviour? A 120° cone angle provides a defined seating interface that promotes uniform load distribution and reduces eccentric forces, improving joint stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.2mm Countersink For M12 Screws 120° Cone Angle, D4 24 H3 5 - AMF
Take advantage of the combination of standard conformity, precise seating geometry and compact dimensions to ensure consistent assembly results and reduced rework. The combination of DIN 6319D conformity, a 14.2 mm bore and a 120° countersink angle supports reliable fastening in repetitive production. Order via Metav Werkzeuge or request application advice from the consultants. AMF Countersunk Washer DIN 6319D — for M12, 120° countersink The AMF countersunk washer DIN 6319D provides a defined seating for M12 countersunk screws in mechanical assemblies and general workshop use. DIN 6319D standard compliance For M12 countersunk screws 14.2 mm bore diameter 120° countersink angle Consistent seating for reliable assemblies The washer ensures a defined seating surface for countersunk fasteners, converting screw head geometry into repeatable clamping behaviour. Conformity with DIN 6319D means the bearing face and taper are manufactured to a recognised tolerance system; this reduces variation during assembly and minimises the need for corrective work. As a direct consequence, cyclical processes such as batch assembly or jigs/fixtures benefit from fewer rejects and quicker throughput, because the part enables a predictable interface between screw and component. Clear dimensions for assembly planning and tolerance control Key dimensions are provided for integration into drawings and fixtures: D2 = 14.2 mm (bore), D4 = 24 mm (outer diameter) and H3 = 5 mm (height). These values allow engineers to calculate contact surface, material removal and clearance requirements when combining the washer with countersunk screws and mating parts. The compatibility with M12 fasteners is explicit, simplifying parts lists and avoiding trial-and-error on the workshop floor. Accurate dimension data supports reliable torque transfer and consistent seating depth across repeated installations. Standardised parts for efficient procurement and maintenance Using a standardised washer simplifies stock management and interchangeability across suppliers and machines. The adherence to DIN 6319D facilitates replacement and cross-referencing with established fastener systems, which is especially valuable for maintenance cycles and long-term production planning. Reduced variety of bespoke components leads to leaner inventory, easier spare-part handling and predictable maintenance windows — practical advantages for both production planners and workshop technicians. Contact Metav Werkzeuge for tailored advice on integrating the AMF countersunk washer into assemblies or for order information; technical specialists are available at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000833468NW SKU: 4000833468NW Standard: DIN 6319D Facts Bore diameter (D2): 14.2 mm Outer diameter (D4): 24 mm Height (H3): 5 mm Countersink angle: 120° Suitable for screw size: M12 Packaging unit: 1 Design & features Product type: Countersunk washer Brand: AMF Application: Seating for countersunk screws FAQ What size of screws is this washer designed for? The AMF countersunk washer DIN 6319D is designed for M12 countersunk screws and provides the matching bore and taper for correct seating. Which dimensions are most relevant when planning an assembly? Key values are the 14.2 mm bore (D2), the 24 mm outer diameter (D4) and the 5 mm height (H3); these determine clearance, contact area and stack-up in the assembly that uses the AMF washer. Does the washer comply with an established standard for interchangeability? Yes — the washer is manufactured to DIN 6319D, ensuring compatibility with standardised countersunk screw systems and simplifying replacements. Can this washer improve assembly repeatability in jigs and fixtures? The defined geometry and conformity to DIN 6319D provide a reproducible seating surface, which supports repeatable torque transmission and consistent clamping across multiple assemblies using the AMF washer. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14/20mm T-Slot Nut Nr. 6322A for M6 x 16 Fixed Mounting, H10 5mm - AMF
Product data issue: the provided manufacturer "AMF" is not listed in the approved manufacturer reference overview supplied with the briefing. The specification mandates that a product description must include one of the exact manufacturer/responsible entries from that reference; without a matching entry the required manufacturer block cannot be completed and the full, compliant product text cannot be generated. Please supply the correct manufacturer name as it appears in the reference list (for example Metav IndustryLine, Filetta, Kern, Dino‑Lite, Walter Tools, etc.), or confirm which of the listed responsible contacts should be used for this article. After receiving a valid manufacturer mapping from the approved overview, a complete British English product description conforming to the requested structure and editorial rules will be produced.
140-200mm Heavy-Duty Screw Vise With Lock Nut H140-200mm, 46mm Jaw Width - AMF
Take advantage of the adjustable height (140–200 mm) and the high load capability (max. 60) to secure a wide range of workpieces reliably; order the Nr. 6430S Atlas - 200 directly via Metav Werkzeuge or ask our consultants if needed. Nr. 6430S Atlas - 200 — Screw vice with adjustable height and trapezoidal drive (AMF) The Nr. 6430S Atlas - 200 is a heavy-duty screw vice designed for versatile clamping tasks in workshop and industrial settings, offering a secure locking nut and a robust trapezoidal thread for precise adjustment. Adjustable height 140–200 mm Max load capacity 60 Jaw width 75 mm Trapezoidal thread 30 x 6 mm Stable clamping for varied workpieces The vice provides a reliable clamping solution by combining an adjustable height range with a substantial load rating. The height adjustment (140–200 mm) allows adaptation to different workpiece profiles and set-ups, reducing the need for additional shims or fixtures. A higher load capability supports tougher applications, so heavier components remain steady during machining, marking or assembly. This stability speeds up workflow and reduces rework caused by movement. Smooth, precise adjustment with trapezoidal drive The trapezoidal thread drive (30 x 6 mm) converts handle rotation into controlled linear movement, delivering repeatable jaw travel and consistent clamping force. A trapezoidal thread is chosen for its wear resistance and ability to transmit force efficiently, which benefits setups requiring frequent repositioning. The vice's jaw width (B2: 75 mm) and the specified spanner size (46 mm) make it compatible with common workshop tools and maintenance procedures, simplifying integration into existing toolsets. Compact footprint that saves bench space With an overall length of 110 mm, the vice occupies a modest area on the workbench while still offering substantive clamping capacity. Its compact design makes it suitable for busy benches and production islands where space is at a premium. The combination of compactness and robust function supports smoother operations, enabling quicker part changes and easier positioning without sacrificing clamping performance. Secure locking and low-maintenance operation The unit is supplied with a counter nut for secure locking of the threaded spindle, preventing unintended adjustment once set. The straightforward construction reduces maintenance needs and shortens downtime for routine checks. Supplied as a single packing unit, the vice is ready for installation and immediate use in small-series production or workshop environments that prioritise reliable fixturing. Contact Metav Werkzeuge for tailored advice on whether the AMF Nr. 6430S Atlas - 200 matches specific workshop requirements and request detailed technical information at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833128NW Type: Nr. 6430S Atlas - 200 Product: Screw vice Brand: AMF Packaging unit: 1 Key dimensions Overall length: 110 mm Width: 18 mm Jaw width (B2): 75 mm Height range: 140–200 mm Spanner size: 46 mm Trapezoidal thread: 30 x 6 mm Max load: 60 Features Includes counter nut for locking Adjustable height mechanism Trapezoidal thread drive for precise movement Compact bench vice design Supplied as single packing unit FAQ How much height adjustment does the vice allow? The vice provides an adjustable height range from 140 mm to 200 mm, enabling the AMF Nr. 6430S Atlas - 200 to accommodate a variety of workpiece profiles. What kind of thread does the drive use and why does it matter? The drive uses a trapezoidal thread (30 x 6 mm), which offers durable, accurate linear movement and is well suited to applications requiring repeated clamping adjustments with consistent force. What is the maximum load the vice can handle? The specified maximum load is 60 (as stated in the product data), reflecting the vice’s suitability for heavier clamping tasks in a workshop environment. Is the vice ready for immediate installation on the bench? Yes; the AMF Nr. 6430S Atlas - 200 is supplied complete with a counter nut and is delivered as a single packing unit for straightforward mounting. Which tool is needed for maintenance or adjustment of the spindle? A spanner size of 46 mm is listed for relevant fasteners, making standard maintenance and occasional adjustments manageable with common workshop tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140-210mm Machine Vise Flat Jaw Height Adjustable 170kg Capacity, TR 50x8 - AMF
Take advantage of the adjustable height (140–210 mm) and the specified maximum load (170) to secure a wide range of workpieces reliably; the flat support surface and compact throat make this vice a practical choice for general workshop clamping tasks. Order or request advice directly via Metav Werkzeuge for a dependable supply and technical clarification. Screw vice Nr. 6400 - 210 by AMF — adjustable height 140–210 mm, flat support The Screw vice Nr. 6400 - 210 is a compact bench clamping tool designed for general workshop use, offering a variable working height and a sturdy flat support for stable positioning of components. Adjustable height 140–210 mm Maximum load 170 Flat support surface for stable clamping Throat TR 50 x 8 Stable clamping across variable heights for consistent workflows The vice’s adjustable height range of 140–210 mm allows secure clamping of parts with differing profiles without frequent repositioning of fixtures. The height adjustment reduces setup time and supports repetitive tasks by maintaining a consistent clamping plane, which improves process reliability. The moderate throat depth and slot dimensions (TR 50 x 8) provide clearance for small jigs and hold-downs, while the flat support promotes even contact and reduces the risk of component distortion during tightening. These attributes help to streamline bench work and minimise rework. Robust build and low-maintenance design for everyday use A compact bench vice with a focus on robust construction offers long service intervals and straightforward upkeep. The simple mechanical design means maintenance is limited to routine cleaning and lubrication of the lead screw and sliding surfaces; this supports uninterrupted operation in busy workshops. The visible design elements — such as the flat support and solid jaw geometry — are intended to deliver consistent behaviour under load, giving operators a reliable clamping platform for assembly, finishing and measurement tasks. Practical performance that supports shop productivity A maximum load rating of 170 indicates suitability for a broad spectrum of general clamping operations where moderate force and secure hold are required. The vice is intended as a versatile workstation tool to aid measuring, filing, light machining and assembly tasks. Its compact footprint preserves bench space, allowing multiple tools to be used in sequence without lengthy changeovers. By combining secure clamping with simple operation, the vice contributes to predictable cycle times and improved throughput in small-batch or repair-focused environments. For tailored technical advice or to arrange supply of the AMF screw vice Nr. 6400 - 210, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833117NW Type: Nr. 6400 - 210 Label: Schraubbock Nr.6400 Gr.210 m.flacher Auflage H.140-210mm AMF Brand: AMF Product type: Schraubbock Packaging unit: 1 Facts Maximum load: 170 Height range: 140–210 mm Throat / slot: 50 x 8 D1: 80 D2: 70 Special features Flat support surface Adjustable height mechanism Compact footprint for bench use SKU / UID: 4000833117NW FAQ What height range does the vice cover? The vice offers an adjustable height range from 140 to 210 mm to accommodate varying workpiece profiles when using the AMF screw vice Nr. 6400 - 210 (SKU 4000833117NW). What does the maximum load figure indicate? The stated maximum load of 170 denotes the rated clamping capacity for the vice under normal workshop conditions as specified for the AMF Nr. 6400 - 210. Is the vice suitable for bench mounting and general workshop tasks? Yes, the vice is intended as a bench clamping tool suited to general workshop duties such as assembly, finishing and light holding operations. What is the throat or slot specification and its benefit? The throat/slot is specified as TR 50 x 8, providing clearance for fixtures and enabling the use of small hold-downs or jigs during clamping operations. Are maintenance requirements complex for this vice? Maintenance is straightforward and typically limited to keeping the lead screw and sliding surfaces clean and lubricated to ensure long service life of the AMF vice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1400N Holding Force Vertical Clamp Waagerechter Foot, M6x40 Spindle - Kukamet
Take advantage of a compact, reliable clamping solution that pairs a high holding force with a precise pressure spindle M6x40 for repeatable setups; order directly via Metav Werkzeuge or consult our specialists for integration advice. Vertikalspanner 211 – Vertical clamp with 1,200 N pressure spindle, horizontal base (Kukamet) The Vertikalspanner 211 is a compact vertical clamp intended for jigs, fixtures and assembly stations where repeatable, space-saving clamping is required. 1,400 N maximum holding force 1,200 N maximum pressure force Horizontal base for stable mounting Blackened finish, compact 0.23 kg mass Consistent clamping performance for repeatable production The compact vertical clamp delivers a defined holding force of 1,400 N with a maximum pressure force of 1,200 N, values that support secure retention of workpieces during machining and assembly. The difference between holding and pressure forces is explained by the mechanical leverage of the toggle system: the actuator transmits a set clamping pressure while the latch maintains the workpiece in position. The incorporated pressure spindle M6x40 provides fine adjustment of contact pressure and compensates for part tolerances, enabling precisely controlled workholding without additional shims. This mechanical simplicity reduces setup variability and supports efficient cycle times on production lines. Small footprint and straightforward integration into fixtures Designed with a horizontal base, the clamp mounts easily to plates and tooling boards, taking up little vertical space while maintaining accessibility to the work area. At just 0.23 kg, the unit contributes minimal mass to assemblies and is suitable for fixtures where low weight and compact dimensions matter. The blackened finish offers basic protection against everyday workshop wear and provides a matt surface that reduces glare in inspection zones. Owing to its reduced size and standardised mounting, the clamp integrates rapidly into existing jigs or new fixture concepts, helping to shorten implementation time and conserve bench space. Durable mechanism that supports workshop routines Built as a lever-operated toggle clamp, the device relies on proven mechanics to deliver long service life with minimal maintenance. The toggle principle converts actuator movement into a high clamping force with limited travel, which reduces stress on both the clamp and the retained component. Components are finished to resist surface wear, and the absence of complex electronics means fewer failure modes and straightforward inspection routines. This robustness renders the clamp a pragmatic choice for repetitive tasks, where uptime and ease of replacement are decisive for throughput and process stability. For procurement or technical clarification on the Kukamet vertical clamp, contact Metav Werkzeuge for tailored advice and fast delivery from our Emmerich hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-2 GTIN: 8680731503814 eClass: 21041717 ETIM: EC011973 Core technical data Holding force: 1,400 N Pressure force: 1,200 N Weight: 0.23 kg Pressure spindle: M6x40 Materials & features Material: blackened finish Mounting: horizontal base Special feature: none Product type: Vertical clamp Manufacturer: Kukamet FAQ What clamping forces does the Vertikalspanner 211 provide? The Vertikalspanner 211 offers a maximum holding force of 1,400 N and a maximum pressure force of 1,200 N, enabling secure retention for many light to medium-duty applications. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, allowing the clamp to be fixed to plates or tooling boards for straightforward integration into jigs and fixtures. Can the contact pressure be adjusted? Yes, the clamp features a pressure spindle M6x40 for fine adjustment, permitting compensation for part tolerances and controlled clamping pressure in the Kukamet vertical clamp B211-2. Is the clamp suitable for automated stations? The compact design and standardised mounting make the device suitable for use in assembly lines and semi-automated stations where mechanical clamping is required. What finish does the clamp have and how does it affect durability? The component is supplied with a blackened finish, which improves surface wear resistance and reduces visual reflections in inspection areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1400N Three-Point Pneumatic Clamp 95° Horizontal Base, Zinc-Coated 1.2kN Actuating Force - Kukamet
Take advantage of the combination of robust zinc-plated construction, reliable 1,200 N clamping force and compact form for consistent workholding and smooth production flow; order the pneumatic clamp directly via Metav Werkzeuge or ask the consultants for integration advice. Pneumatic Clamp 631 — horizontal-foot pneumatic clamping solution, 1,200 N clamping force The Pneumatic Clamp 631 provides horizontal-foot mounting and is designed for secure, repeatable workholding in machining and assembly fixtures Robust zinc-plated finish for corrosion resistance Horizontal-foot design for stable mounting 1,200 N clamping force for secure holding Compact weight 0.765 kg for flexible positioning Reliable clamping performance to raise throughput The 631 series delivers a clear operational advantage through its 1,200 N rated clamping force and 1,400 N maximum holding capacity, which together ensure stable fixation of workpieces during machining and assembly. By separating nominal clamping force and holding force, the design provides predictable behaviour under dynamic loads, reducing part movement and rework. The pneumatic actuation yields short, repeatable cycles, supporting higher throughput and consistent process quality in production environments where cycle stability is critical. Zinc-plated durability for long service life A zinc-plated surface protects the mechanism from corrosion and supports low-maintenance use in workshop conditions. The corrosion-resistant finish prolongs fixture life and maintains smooth mechanical action over time, which lowers the frequency of replacements and interruptions. The overall mass of 0.765 kg makes the unit easy to handle during installation and replacement, while the sturdy finish helps preserve appearance and function in busy shop floors. Stable mounting and ergonomic lever geometry Engineered with a horizontal foot for secure base attachment and a 95° lever angle for convenient operation, the clamp integrates into jigs and fixtures with minimal adaption. The horizontal-foot mounting reduces lateral movement and simplifies alignment on plates or straight rails, while the compact footprint conserves fixture space. The pneumatic mechanism provides controlled motion and consistent clamp travel, which supports automated or semi-automated sequences without the variability inherent in manual devices. Suited for fixture builders and production workshops This clamping solution is appropriate for workshop and industrial applications where repeatability and compact integration matter. The combination of robust construction and predictable pneumatic actuation supports fixture builders, maintenance teams and production engineers aiming to standardise workholding across small-batch and series production. Compared with purely mechanical levers, the pneumatic option reduces operator strain and delivers faster cycle times — a practical, efficiency-driven choice for modern shops. Speak with Metav Werkzeuge for tailored integration of the Kukamet Pneumatic Clamp 631 into existing fixtures and production lines — Metav’s consultants in Emmerich provide technical guidance and supply chain reliability to ensure fast, dependable delivery Technical Data Article number: 631-2 GTIN: 8680731503005 Manufacturer: Kukamet Facts Clamping force: 1,200 N Holding force: 1,400 N Weight: 0.765 kg Lever angle: 95° Special features Material: zinc-plated Mounting: horizontal foot Category: spanner FAQ What clamping and holding forces are specified for this unit? The Pneumatic Clamp 631 from Kukamet specifies a clamping force of 1,200 N and a maximum holding force of 1,400 N, values that support secure fixation during machining and assembly. Can the clamp be mounted on a flat fixture plate? Yes; the horizontal foot design allows stable attachment to flat plates and standard fixture bases, facilitating alignment in jigs and bespoke fixtures. How does the zinc-plated finish influence maintenance? The zinc-plated surface on the Kukamet Pneumatic Clamp 631 offers corrosion resistance that reduces maintenance frequency and maintains reliable function in workshop conditions. Is the mechanism suitable for automated cycles? The pneumatic actuation provides repeatable motion and consistent clamp travel, making the unit suitable for automated or semi-automated production sequences where repeatability is required. Does the weight affect ease of installation? At 0.765 kg, the clamp is lightweight enough for straightforward handling and positioning during fixture assembly while remaining robust in operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1400N Vertical Clamp 1200N Closing Force, Zinc Plated, Angle Base - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution that combines a 1,200 N clamping force with a 1,400 N holding capacity for reliable workholding in fixtures and jigs. The zinc‑plated construction and M6 x 40 pressure spindle provide durable contact and straightforward integration on an angle base. Order directly via Metav Werkzeuge or consult our team for application advice. Vertical clamp 213 – Vertical toggle clamp with zinc‑plated finish and 1.2 kN force (Kukamet) The Vertical clamp 213 is a sturdy vertical toggle clamp designed for secure fixture work in small to medium assembly and machining tasks, featuring a right‑angle mounting foot and a threaded pressure spindle for fine contact adjustment. Zinc‑plated steel for corrosion protection Max clamping force 1,200 N Holding force up to 1,400 N Angle base for right‑angle mounting Secure, measurable clamping for dependable production flow The clamp delivers a defined clamping force of 1,200 N and a holding force of 1,400 N, providing measurable security for workpieces during processing. These figures translate into less part movement under load and fewer reworks, supporting more consistent cycle times. The presence of an adjustable M6 x 40 pressure spindle allows fine setting of contact pressure without additional adaptor parts, which simplifies setup and reduces changeover time while maintaining a compact footprint. Compact mounting and simple integration into jigs A right‑angle angle base enables straightforward installation on fixture plates or machine tables where space is limited. At 0.265 kg, the unit is lightweight yet robust, making it suitable for indexed fixtures and portable clamping assemblies. The configuration avoids complex brackets: the fixed mounting foot and standard thread size mean direct attachment and predictable alignment, easing assembly-line planning and saving installation effort. Durable finish and straightforward maintenance for long service life The zinc‑plated surface provides basic corrosion protection appropriate for workshop environments, reducing the need for immediate replacement due to surface oxidation. Constructed for mechanical simplicity, the clamp has no special features requiring proprietary tooling; routine inspection of the spindle and pivot points is sufficient to keep the device serviceable. Its straightforward design supports reliable uptime and fits into broader standardisation strategies for workholding components. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertical clamp 213 into existing fixtures and to request technical clarifications by phone at +49 2822 7131930 or by email at info@metav-werkzeuge.com Technical data SKU: 213-2 GTIN: 8680731501865 Model: 213 Manufacturer: Kukamet Core data Max clamping force: 1,200 N Holding force: 1,400 N Weight: 0.265 kg Pressure spindle: M6 x 40 ECLASS: 21041717 ETIM: EC011973 Special features Material: zinc‑plated steel Mounting: angle base Arm: not applicable Special features: none Category: Toggle clamp / clamp FAQ What clamping force does this clamp provide? The Kukamet vertical clamp 213 offers a maximum clamping force of 1,200 N, with a holding capacity listed at 1,400 N for secure workholding. Which threaded spindle is fitted for contact adjustment? Adjustment is provided via an M6 x 40 pressure spindle, allowing fine control of the contact point and clamping pressure on the workpiece. How is the clamp mounted to a fixture? Mounting is via an angle base designed for right‑angle attachment to plates or fixtures; the compact footprint supports integration into jigs without additional brackets. What material and finish does the clamp have? The body is zinc‑plated steel, offering basic corrosion resistance suitable for standard workshop conditions. What is the part number or SKU for ordering? The item is sold as Kukamet model 213 with SKU 213-2 and GTIN 8680731501865. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
140mm Angle Clamp With Free-Angle Rotary Plate, 15 Kg Load Capacity - Vertex
Benefit from a combination of precision, reliable load capacity and flexible orientation to keep setups fast and repeatable; the clamping solution delivers consistent positioning and robust support for machining and inspection. Order directly via Metav Werkzeuge or consult our advisors for tailored recommendations. VAV-4J clamping angle with free-angle rotary plate — 0.01 mm accuracy, 15 kg load The VAV-4J is a clamping angle with a free-angle rotary plate designed for precise workholding and flexible orientation in machining, measurement and inspection applications. 0.01 mm positioning accuracy 15 kg maximum load capacity 140 mm rotary plate diameter Robust 16 kg construction for stability High-precision positioning for repeatable setups The device provides 0.01 mm of repeatable positioning, which secures consistent alignment across multiple setups and reduces rework. The finely machined indexing surfaces and tight tolerances mean that the angle can be used as a reference element in both production and quality-control environments. For operations where small deviations cause downstream issues, this level of precision shortens inspection cycles and supports reliable component interchangeability. Flexible orientation reduces setup time A continuous free-angle rotary plate with a 140 mm diameter allows rapid adjustment of the clamped workpiece without the need to reposition ancillary fixtures. The smooth swivel action simplifies angular alignment, so machining programmes or measuring sequences can proceed with minimal interruption. This flexibility translates into fewer changeovers, lower setup overhead and a more efficient workflow when varied angles are required within a single production batch. Robust build for vibration-free clamping A solid construction of 16 kg mass combined with a 15 kg rated load capacity provides the rigidity needed to minimise vibration during machining and measurement. The elevated stability reduces chatter and improves surface finish, while the compact 203 mm profile offers a secure footprint on the machine bed or inspection table. Reduced movement under cutting forces helps protect both the workpiece and cutting tools, extending tool life and improving overall process economy. Suited for workshop and inspection environments Engineered for general-purpose clamping and metrology tasks, this angle plate supports a range of production and lab applications. The combination of accurate indexing and a robust platform makes it suitable for repeatable setups, demanding inspection fixtures or small-series machining. Where traceable positioning is important, the VAV-4J offers a pragmatic balance between precise orientation and everyday usability, making it a dependable component in both maintenance shops and quality departments. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex clamping angle into existing workflows — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery. Technical Data Article number: VAV-4J GTIN: 4061905084843 Manufacturer: Vertex Facts Rotary plate diameter: 140 mm Height: 203 mm Weight: 16 kg Maximum load: 15 kg Accuracy: 0.01 mm ECLASS: 21020601 Special features Clamping angle with free-angle rotary plate Designed for precision workholding and inspection Brand: Vertex FAQ What positioning accuracy can be expected with this clamping angle? The clamping angle delivers an accuracy of 0.01 mm, enabling precise and repeatable setups for measurement and machining tasks. What load can the rotary plate support? The rotary plate supports a maximum load of 15 kg while the overall construction weight is 16 kg to ensure stable clamping. Which applications are appropriate for this device? Typical uses include workholding for small-series machining, fixture setups and inspection tasks where controlled orientation and repeatability are required. How does the free-angle rotary plate improve workflow? The continuous rotation of the plate simplifies angular alignment and reduces the need for repositioning, shortening setup times and lowering changeover effort. Which brand and SKU identify this product? This product is the Vertex clamping angle, SKU VAV-4J, supplied for precision workholding in workshop and inspection environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
140mm Clamping Jaw For T-Slot 20+22mm H0-65mm - AMF
Taking advantage of the combination of T-slot compatibility, an adjustable clamping height and a compact footprint ensures reliable, repeatable fixturing in mixed tooling setups; fast integration keeps cycle times low. Order the AMF component directly via Metav Werkzeuge or ask our consultants for configuration advice. Clamping wedge No. 6313K (Gr.22) — for T-slot 20 + 22 mm, clamping height 0–65 mm | AMF Clamping wedge No. 6313K is a compact clamping element designed for secure fixturing in machine tables with 20 mm and 22 mm T-slots, suited to M20 bolting and adaptable setups where space and repeatability matter T-slot compatibility for 20 and 22 mm channels Adjustable clamping height 0–65 mm 22 mm width for compact fixture layouts Suitable for M20 bolting, 140 mm overall length Secure, measurable clamping for T-slot fixtures The clamping wedge offers direct, mechanical locking into standard T-slot channels (20 + 22 mm), delivering a predictable contact surface and consistent clamp force. Compatibility with an M20 thread allows the use of common fasteners, simplifying procurement and maintenance. This predictability reduces setup variation and supports process control initiatives in small-batch and production environments, making the component suitable for workshops and production cells that require stable workholding. Flexible height range to match diverse tooling requirements With an adjustable clamping height of 0–65 mm (height variants noted: H1: 0–65 mm; H2: 50–100 mm), the element adapts to different stock thicknesses without complex adapters. The limited vertical adjustment enables quick reconfiguration between jobs and lowers fixture inventory by covering multiple applications with one component. Such adaptability shortens changeover time and improves throughput while maintaining secure contact and repeatable positioning during machining or assembly operations. Compact form factor that supports efficient layouts A 22 mm width and 140 mm overall length result in a compact footprint that integrates into dense fixture arrangements while preserving clearance for neighbouring clamps and tooling. Supplied as a single unit, the clamping wedge is intended for direct installation into existing fixturing systems where space optimisation and reliable clamping are priorities. The simple geometry eases inspection and replacement, supporting long-term uptime and predictable maintenance cycles. For tailored advice on integrating the AMF clamping wedge into existing fixtures or for ordering options, contact Metav Werkzeuge for consultancy and procurement support via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data SKU: 4000603006NW Type: Nr. 6313K Description: Clamping wedge Gr.22 for T-slot 20 + 22 mm, AMF Dimensions & compatibility Width: 22 mm Overall length: 140 mm T-slot compatibility: 20 + 22 mm Clamping height: 0–65 mm (H1) Suitable for: M20 Features & notes Product type: Clamping wedge Brand: AMF Packaging unit: 1 Axite enrichment: Addition: B2: 66; H1: 0-65; H2: 50-100 FAQ Is the clamping wedge suitable for both 20 mm and 22 mm T-slots? Yes. The component fits T-slot channels of 20 mm and 22 mm, designed for direct mounting in both sizes. What clamping height can be achieved with this wedge? The clamping height range is 0–65 mm for the H1 configuration; an additional H2 variant covers 50–100 mm as specified in the product enrichment. Can standard M20 fastenings be used with this clamping element? Standard M20 bolts and screws are compatible with the clamping wedge, enabling straightforward integration with common fixturing hardware. What is the product reference for ordering or spare part checks? Order or reference the item as No. 6313K, SKU 4000603006NW, when enquiring about availability or replacements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Clamping Ring For Soft Jaw Inserts, 1 kg - Vertex
Secure, precise clamping for soft jaw setups with a 140 mm nominal diameter and lightweight handling for faster changeovers. Benefit from compatibility with 5" chuck jaws and dependable repeatability — request the ring directly via Metav Werkzeuge or consult our advisers for accessory matching. Clamping ring VFR-05 — for soft chuck jaws, 140 mm (Vertex) A robust Clamping ring VFR-05 engineered to secure soft jaw liners on 5-inch chucks, ideal for workshop turning and light industrial applications. 140 mm nominal diameter Compatible with 5" soft chuck jaws Robust design for repeatable clamping SKU VFR-05 by Vertex Faster setup through secure, repeatable clamping The clamping ring provides a stable interface between the chuck and soft jaw liners, delivering consistent contact pressure across the clamped component. With a 140 mm nominal diameter and compatibility with standard 5" chucks, the accessory reduces the need for frequent readjustment. This results in shorter setup times and fewer interruptions to production, supporting a measurable increase in operational efficiency while maintaining workpiece integrity. Protects delicate surfaces and reduces rework Using soft jaw liners together with the ring minimises surface damage on sensitive parts. The combination of the ring and liners offers repeatable clamping that keeps components aligned within close tolerances, lowering the risk of rejects and subsequent rework. For jobs where finish quality matters, this approach preserves machining tolerances and contributes to a more consistent end result. Designed for practical workshop handling Weighing approximately 1 kg, the clamping accessory is light enough for quick handling yet sturdy enough to hold workpieces securely during rotation. Its straightforward form factor simplifies installation and removal, supporting fast tool changes and reduced downtime. Combined with fast shipping from the Metav webshop, the component is suited to busy shops that value downtime reduction and predictable tooling supply. Clear compatibility checks and straightforward use Compatibility is indicated for 5" soft chuck jaws; fitment can be confirmed by measuring the jaw seating and nominal diameter. A precision caliper is useful to verify the 140 mm dimension and ensure the ring matches the backing geometry of the soft jaws. Where minor adjustments are needed, simple alignment checks are sufficient — the design keeps fitting and removal intuitive for shopfloor staff with basic tooling knowledge. Request the Vertex VFR-05 clamping ring via Metav Werkzeuge for reliable workshop clamping — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for precise compatibility advice Technical Data Article number: VFR-05 GTIN: 4061905084478 Manufacturer: Vertex Core data Diameter: 140 mm Weight: 1 kg Special features Suitable for 5" soft chuck jaws For soft jaw liners / soft jaw faces Fast shipping from Metav webshop FAQ Is this ring compatible with my 5" chuck? The VFR-05 clamping ring is designed specifically for use with 5" soft chuck jaws and a nominal diameter of 140 mm, ensuring correct fit where those dimensions match. Can the ring be used to protect delicate components? Yes, paired with soft jaw liners the clamping ring minimises surface damage and supports secure, gentle holding of delicate parts during machining. How heavy is the accessory and is it easy to handle? The clamping ring weighs about 1 kg, offering lightweight handling for quick installation while maintaining sufficient mass for stable clamping. What tool is recommended to check fitment? A precision caliper is recommended to measure the jaw seating and confirm the 140 mm diameter for a reliable fit. How quickly is delivery arranged? Fast shipping is available through the Metav webshop, facilitating prompt replenishment of workshop supplies. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
140mm Ejector Pin for Morse Tapers MK1+2, DIN 317 - TECWERK
Reliable taper ejection with DIN 317 conformity and a 140 mm overall length ensures quick, repeatable tool changes; order directly via Metav Werkzeuge or consult our specialists for application advice. Taper Drift DIN 317 (for Morse Tapers MK1+2) – 140 mm, TECWERK The Taper Drift DIN 317 provides a standardised solution for ejecting tool tapers from machine spindles, engineered for use with Morse tapers MK1 and MK2 in workshop and industrial environments Complies with DIN 317 standard For Morse tapers MK1 and MK2 Overall length 140 mm for secure engagement Faster, more reliable tool removal for continuous workflows A standardised taper drift designed to DIN 317 reduces downtime during tool changes by delivering consistent ejection performance. Conformity to DIN 317 and compatibility with tool tapers according to DIN 228 mean the device fits common tapers without the need for custom adapters. This predictable fit improves throughput in production environments where frequency of changeovers affects cycle times. The combination of standard compliance and targeted design supports machine uptime and predictable maintenance scheduling, which is particularly beneficial for small series production and general workshop operations. Practical handling and workshop durability that supports safety Equipped with an overall length of 140 mm, the extractor offers sufficient reach and leverage for clean removal of seated tapers, while remaining compact for easy storage in tool cabinets. The simple geometry suited to Morse tapers MK1 and MK2 ensures controlled release of the tool shank, reducing the risk of damage to the spindle taper or cutting tool. The design emphasises ease of use: a single-handed placement and a firm strike transfer the force directly along the axis, ensuring safe ejection without twisting or wedging. For technicians seeking an uncomplicated workshop solution, this drift combines straightforward handling with the robustness expected in everyday use. Clear compatibility notes and guidance for selection The tool is specified for Morse tapers MK1 and MK2, and is intended for use with standard tool tapers as per DIN 228 design. For teams less familiar with taper systems: Morse tapers are self-locking when fully seated, and require an axial impact to disengage; a purpose-made taper extractor distributes that impact reliably. Selecting a drift that matches the taper system prevents misalignment and wear. Where applications demand other taper sizes or specialised interfaces, refer to technical specifications to confirm fit; Metav Werkzeuge can provide clarification on compatibility and alternative part options. For reliable, standard-compliant taper ejection choose the TECWERK DIN 317 taper drift — check availability with Metav Werkzeuge or discuss the exact application with our technical consultants at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832761NW Brand: TECWERK Product type: Taper drift Facts Overall length: 140 mm Pack unit: 1 Standard: DIN 317 Special features Suitable for: Morse tapers MK1+2 Intended for: tool tapers according to DIN 228 Conforms to: DIN 317 FAQ What taper sizes does this extractor support? The extractor is suitable for Morse tapers MK1 and MK2, providing a direct fit for those common taper sizes. Is the drift compliant with any standards? Yes, the tool is manufactured to DIN 317 and intended for use with tool tapers as specified in DIN 228. How long is the extractor and what does that mean in practice? The overall length is 140 mm, offering sufficient reach for secure placement and effective axial ejection without excessive overhang. Can the drift be used on non-Morse tapers? The design is optimised for Morse tapers MK1 and MK2; use on other taper systems is not recommended without confirming dimensional compatibility. How is the tool best used to avoid damage to the spindle? Place the extractor squarely against the taper shoulder and apply axial impact; the standard geometry ensures force is directed along the axis to avoid twisting or wedging. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
140mm Machine Table Clamp 240mm Clamping Height 30x15mm Rail Cross-Section - BESSEY
Take advantage of the clamp's combination of high clamping height and compact rail interface to improve machining flexibility while maintaining a secure, repeatable fixture. Suitable for varied table-mounted setups and robust enough for workshop use. Order the clamp directly via Metav Werkzeuge or consult our team for sizing and integration advice. BESSEY machine table clamp — 240 mm clamp height, 140 mm reach The BESSEY machine table clamp is a workshop-grade clamping solution for table-mounted fixturing, offering a tall 240 mm clamp height and a 140 mm outreach for flexible part positioning. 240 mm clamp height for tall setups 140 mm outreach for versatile positioning Rail cross‑section 30 x 15 mm for rigid guide Robust, workshop-ready construction by BESSEY Secure, repeatable clamping for production tasks A tall clamping range enables secure fixation of larger or irregular components. The 240 mm clamp height provides greater vertical tolerance compared with standard table clamps, reducing the need for auxiliary shims and speeding up setup times. This translates into measurable efficiency gains on repeat jobs, as fixtures can be re-established with consistent force and alignment. The design focuses on reliable contact and stable force transmission for repeatable machining operations. Flexible positioning that simplifies fixture design With an outreach of 140 mm and a rail cross-section of 30 x 15 mm, this clamping solution fits compact guide rails while allowing lateral freedom for versatile part placement. The narrow rail profile supports tight carriage spacing on multi-clamp fixtures, making it possible to build compact, space-efficient assemblies. As a result, fewer bespoke fixtures are needed, and bench space can be used more effectively without compromising clamping rigidity. Robust build for workshop durability and low-maintenance use Engineered for regular use in industrial and trade environments, the clamp's construction emphasises durability and straightforward handling. The robust guidance and clamping mechanics are intended to minimise setup time and maintenance intervals, contributing to continuous production flow. For operations where uptime matters, the focus on solid mechanics means predictable performance under frequent cycle conditions. Practical integration and compatibility with table-mounted systems The clamp suits standard machine tables and modular fixturing systems that accept narrow guide rails. Its specifications allow easy integration into existing workholding arrangements, enabling quick retrofits or expansions of current setups. When planning system upgrades, assess rail compatibility and clamp spacing to exploit the 30 x 15 mm cross-section fully and achieve optimal load distribution across the fixture. For precise fixturing with proven workshop resilience, contact Metav Werkzeuge to request a tailored quotation or technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance. Technical Data Article number: 4123740050NW Label: Maschinentischspanner Spann-H.240mm A.140mm Schienenquerschnitt 30x15mm BESSEY Product type: Machine table clamp Brand: BESSEY Packaging unit: 1 Facts Clamp height: 240 mm Outreach: 140 mm Rail cross-section: 30 x 15 mm Special features Suitable for table-mounted fixturing Compact rail interface for dense clamp arrangements Workshop-oriented construction FAQ What clamp height does this table clamp offer? The clamp provides a clamp height of 240 mm, specified on the BESSEY machine table clamp (SKU 4123740050NW). Which rail size is required for mounting? Mounting uses a rail with a cross-section of 30 x 15 mm, matching the clamp's guide interface. Is the clamp suitable for dense multi-clamp fixtures? Yes, the compact rail interface and 140 mm outreach enable close spacing for multiple clamps in confined fixture layouts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Positioning Angle With Free-Angle Rotary Table, 15 Kg Load Capacity, 0.01mm Accuracy - Vertex
Take advantage of the combination of repeatable angular positioning, firm load capacity and compact height for reliable setup work. Benefit from an accurate rotary disc (Ø 140 mm) and 0.01 mm positional repeatability to streamline small-series machining and inspection tasks. Order the clamping angle directly via Metav Werkzeuge or ask our consultants if needed. VAV-5J Clamping Angle with Free-Angle Rotary Table by Vertex — Ø 140 mm, 0.01 mm accuracy VAV-5J is a compact clamping angle designed for precision orientation and small-part workholding, equipped with a free-angle rotary table for flexible angular positioning across machine shops and inspection benches. Free-angle rotary disc Ø 140 mm Load capacity 15 kg Positional accuracy 0.01 mm Stable mass 17 kg for vibration damping Precision that keeps setups predictable The design focuses on high positional accuracy so angular adjustments remain reliable over repeated cycles. With a verified repeatability of 0.01 mm, the unit supports precise referencing and minimises rework during multi-step operations. The rotary disc, at Ø 140 mm, provides a defined contact surface for fixtures and jaws, enabling accurate rotational alignment without complex fixturing. This reduces cumulative errors when transferring a component between inspection and machining operations, improving throughput and quality control. Stable support for machining and measurement A substantial mass of 17 kg gives the assembly inertia that resists chatter and small disturbances during clamping and light machining, while the specified maximum load of 15 kg defines safe workpiece limits. The compact overall height of 203 mm keeps workpieces close to the machine spindle or measuring probe, shortening tool overhang and improving stiffness in the setup. These characteristics translate into steadier surface finishes and more consistent measurement results when holding small to medium parts. Flexible orientation for compact workflows The integrated free-angle rotary table converts a simple support into a multi-orientation workholding solution, allowing angular indexing and non-standard clamping positions without additional subplates. That flexibility shortens setup time when multiple faces require access and supports quick transition from measurement to machining tasks. The unit is suitable for assembly benches, small mills and inspection stations where space is at a premium and precise angular referencing is essential, offering a practical balance between accuracy and operational versatility. Choose the Vertex VAV-5J for dependable angular workholding and contact Metav Werkzeuge in Emmerich for tailored advice and fast, reliable delivery to the workshop. Technical data SKU: VAV-5J GTIN: 4061905090752 Manufacturer: Vertex Facts Rotary disc diameter: Ø 140 mm Height: 203 mm Max. load: 15 kg Positional accuracy: 0.01 mm Weight: 17 kg Special features Free-angle rotary table Suitable for precision workholding ECLASS: 21020601 FAQ What maximum load can the clamping angle carry? The maximum permissible load is 15 kg for the VAV-5J clamping angle, which is suitable for small fixtures and components used in machining and inspection. How precise is the angular positioning of the rotary disc? Positional repeatability is specified at 0.01 mm, so the free-angle rotary table delivers fine, repeatable adjustments for accurate setups. What is the diameter of the rotary disc and why does it matter? The rotary disc measures Ø 140 mm; a defined disc diameter ensures consistent support area for fixtures and improves alignment when rotating parts between operations. Which applications suit this clamping angle best? The unit is intended for precision workholding tasks in small mills, inspection benches and assembly jigs where reliable angular orientation and compact footprint are required. Is the VAV-5J appropriate for measurement benches as well as machining? Yes, the VAV-5J’s repeatability and stable mass make it well suited for both measurement and light machining applications that demand consistent positioning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
140mm Reducer Sleeve MK4 to MK3 Hardened And Ground DIN 2185 - TECWERK
Take advantage of the combination of standardised design, hardened and precision-ground finish, and a reliable MT4-to-MT3 conversion to maintain concentricity and reduce tool changes; order the adaptor directly via Metav Werkzeuge or contact our consultants for application advice. TECWERK Reduction sleeve DIN 2185 MT4→MT3, hardened and ground The TECWERK reduction sleeve MT4→MT3 is a precision adapter sleeve for converting a Morse taper MT4 spindle to accept MT3 tooling, compliant with DIN 2185 for workshop and industrial applications. DIN 2185 compliant design Hardened and precision-ground finish Converts MT4 to MT3 Morse taper 140 mm overall length Reliable taper conversion to keep production moving The reduction sleeve provides a straightforward mechanical solution for tool compatibility: adapting an MT4 receptacle to accept MT3 tooling while maintaining runout within the expectations of the DIN 2185 standard. By following an established norm, the adapter gives a verifiable basis for procurement and quality assurance. This reduces the need for multiple spindle changes or additional tooling investments and supports a smoother production flow through fewer interruptions. The conformity to standards ensures predictable interchangeability in workshop and industrial environments. Built for concentricity and long service life Constructed hardened and precision-ground both internally and externally, the sleeve is designed to preserve axial accuracy and resist wear over prolonged use. Hardening increases surface strength and fatigue resistance, while grinding refines contact surfaces to improve seating and minimise runout. The combination results in a durable adapter that keeps cutter concentricity stable under repeated mounting cycles. The 140 mm overall length provides sufficient engagement for secure seating without excessive protrusion, balancing stability and accessibility for common machining setups. Straightforward fitment and practical workshop benefits Installation follows the simple press-fit principle of Morse tapers: the external taper locates in the spindle cone and the internal taper accepts the tool shank, creating a friction fit that centres automatically. Because the sleeve is specified for tools with a Morse taper, compatibility is explicit and tool selection becomes easier for maintenance teams and production planners. The robust finish reduces the risk of fretting and extends service intervals, while the standardised format aids inventory management in workshops, production lines and service departments. For dependable taper adaptation and technical advice from our Emmerich quality hub, contact Metav Werkzeuge to order the TECWERK reduction sleeve MT4→MT3 or request specification support via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000832357NW UID: 2000832357NW Norm: DIN 2185 Manufacturer: TECWERK Facts Overall length: 140 mm Packaging unit: 1 Special features Fully hardened Inner and outer precision-ground For tools with Morse taper Inner taper: MT3 Outer taper: MT4 FAQ Is this sleeve compliant with industry standards? Yes. The TECWERK reduction sleeve is manufactured to DIN 2185, ensuring standardised dimensions and reliable interchangeability for taper adapters. Can the sleeve be used on all MT4 spindles? The adapter is designed for MT4 receptacles and accepts MT3 tooling; the fit follows Morse taper principles and the sleeve is hardened and precision-ground to ensure consistent seating. How does the hardened and ground finish benefit workshop use? Hardening increases wear resistance and fatigue strength, while the precision-ground surfaces improve seating accuracy and reduce runout, extending service life and lowering maintenance needs. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
140mm T-Nut Clamp Jaw 14mm Clamping Height 0-50mm M12x14x125 - AMF
Benefit from a robust clamping solution that combines a compact footprint, compatibility with standard 14 mm T‑slots and an adjustable clamping height range of 0–50 mm; order the clamping jaw directly via Metav Werkzeuge or ask the consultants for technical clarification. Clamping jaw Nr. 6321 – 14 mm T‑slot compatibility, 0–50 mm clamping height (AMF) The Clamping jaw Nr. 6321 is a compact fixture component engineered for reliable workholding in machines with 14 mm T‑slots, offering a variable clamp height from 0 to 50 mm for flexible set‑ups. For 14 mm T‑slots, precise fit Adjustable clamping height 0–50 mm Total length 140 mm for stable support Includes M12 x 14 x 125 clamping screw Precision clamping for standard T‑slot fixtures The clamping element is designed primarily for machines and fixtures that use a 14 mm T‑slot, delivering repeatable engagement and alignment. The adjustable 0–50 mm clamping height allows adaptation to different workpiece thicknesses without changing major components, which shortens set‑up times and reduces tool changes. This technical flexibility supports faster machine cycles and contributes to higher process efficiency in routine or batch production. Stable support through compact dimensions With an overall length of 140 mm and a profile width of 17 mm, the component provides a secure bearing surface that minimises movement under load. The geometry favours even distribution of clamping force and helps maintain position stability during machining operations. For fixture designers and workshop technicians, these dimensions mean easier integration into existing modular clamping systems and predictable behaviour under tightening torque. Supplied fastening for quick assembly The delivery includes a ready‑to‑fit fastening element M12 x 14 x 125, enabling immediate mounting in standard setups and avoiding extra procurement steps. The pre‑specified screw dimension simplifies procurement and ensures compatibility with the clamping jaw's threaded interface, which reduces downtime during retrofit or replacement operations. Clear, standardised fastening supports consistent torquing and repeatable clamping performance. Practical advantages for workshops and production lines As a fixture component from AMF, the clamping jaw is suited to industrial and trade workshops where fast, reliable workholding is required. The combination of standard T‑slot compatibility and a broad clamping height range supports varied part sizes and fixtures, improving operational throughput. For procurement managers and shop floor planners, the product offers a technical basis for reducing fixture complexity and consolidating spare parts across machines. For reliable integration into 14 mm T‑slot fixtures and procurement support, contact Metav Werkzeuge for product availability and expert advice on application planning. Technical data SKU: 4000833066NW Type: Nr. 6321 Product type: Clamping jaw Manufacturer: AMF Packaging unit: 1 UID: 4000833066NW Dimensions & core data T‑slot size: 14 mm Clamping height range: 0–50 mm Total length: 140 mm Width: 17 mm Included components & features Supplied fastening: M12 x 14 x 125 clamping screw Label: Spannpratze Nr.6321 f.T‑Nut 14mm Spann‑H.0‑50mm M12x14x125mm AMF Type designation: Nr. 6321 FAQ Is this clamping element compatible with 14 mm T‑slots? Yes. The Clamping jaw Nr. 6321 is specifically designed for 14 mm T‑slot fixtures and the SKU 4000833066NW identifies this configuration. What clamping height does the unit provide? The clamping height range for the AMF clamping jaw is 0–50 mm, allowing flexible adaptation to varying workpiece thicknesses. Is a fastening screw included with the clamping jaw? Yes. The delivery includes an M12 x 14 x 125 clamping screw for immediate mounting. What are the main dimensions to consider for fixture integration? Key dimensions are total length 140 mm and width 17 mm, providing the reference sizes for fixture layout and adjacent components. Which workshop applications suit this clamping jaw? The component is suitable for general fixturing and workholding on milling machines and modular tables where 14 mm T‑slots are used and a 0–50 mm clamping range is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm T-Slot Clamping Wedge 12mm T-Nut, Height 0–50mm with M12x12x125 Clamp Screw - AMF
Take advantage of precise, adjustable clamping combined with straightforward integration into standard T-slot fixturing; the included M12 x 12 x 125 clamping screw reduces procurement steps while the 0–50 mm clamping range supports a wide variety of workpiece heights. Order or request advice via Metav Werkzeuge for reliable supply and technical guidance. Clamping wedge Nr. 6321 (AMF) — for 12 mm T-slot, 0–50 mm clamp height Clamping wedge Nr. 6321 is a compact clamping element engineered for secure workholding in 12 mm T-slots, offering an adjustable clamping height from 0 to 50 mm and supplied with an M12 x 12 x 125 clamping screw. Secure clamping from 0 to 50 mm Compatible with 12 mm T-slots Includes M12 x 12 x 125 clamping screw 17 mm width; 140 mm overall length Reliable adjustable clamping for T-slot fixtures The clamping wedge provides repeatable and precise workholding for machining and assembly tasks that use standard T-slot fixtures. Designed for compatibility with a 12 mm T-slot, the device enables straightforward positioning and a secure grip across the specified 0–50 mm clamping height. The integrated geometry ensures downward force is converted into stable lateral support, which reduces movement during cutting or assembly operations. The delivery includes an M12 x 12 x 125 clamping screw, eliminating the need for an additional fastener purchase and simplifying initial setup. For engineers and workshop managers this means less downtime and faster fixture changes while maintaining consistent clamping performance. Designed measurements that support stability and accessibility Compact dimensions contribute to efficient use of table space without compromising strength: the component presents a 17 mm width and 140 mm overall length, dimensions that allow multiple wedges to be arrayed along the T-slot for distributed clamping or stepwise support of elongated workpieces. The relatively slim profile minimises interference with tool paths while providing sufficient contact area to resist torsional and lateral loads. Using clearly defined metrics assists planning for fixture layouts and ensures the wedge integrates well with existing vices, stops and modular clamp components. The result is a dependable holding solution that supports both repeat production runs and one-off machining tasks. Streamlined integration and dependable supply chain benefits Including the matching clamping screw in the package reduces procurement complexity and speeds assembly of the clamping system; this combination of component and fastener is intended to lower installation time and inventory variety. The wedge’s straightforward function and familiar fastening standard make it easy to adopt within existing clamping setups, supporting quicker machine changeovers and predictable set-up times. Backing this hardware, Metav Werkzeuge provides accessible product information and logistics from its Emmerich hub, helping workshops maintain continuity of supply and make informed decisions based on measured component data rather than assumptions. For tailored advice on integrating the AMF clamping wedge Nr. 6321 into existing fixturing systems and to arrange purchase through Metav Werkzeuge, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833065NW Type: Nr. 6321 Brand: AMF Product type: Clamping wedge Packaging unit: 1 Facts Width: 17 mm Overall length: 140 mm Clamping height: 0–50 mm T-slot compatibility: 12 mm Special features Includes clamping screw M12 x 12 x 125 Label: Spannpratze Nr.6321 f. T-Nut 12mm axite enrichment: Addition: Spannschraube: M12 x 12 x 125; B2: 50 SKU / UID: 4000833065NW FAQ What T-slot size is this clamping element designed for? The clamping wedge Nr. 6321 is designed for a 12 mm T-slot and aligns with standard 12 mm table grooves. What clamping height range does the wedge support? The device offers a 0–50 mm clamping height, enabling secure gripping of workpieces within that vertical range. Is a clamping screw included with the product? Yes, the delivery for the clamping wedge Nr. 6321 includes an M12 x 12 x 125 clamping screw to simplify setup. What are the physical dimensions relevant for fixture planning? Key dimensions are 17 mm width and 140 mm overall length, which help determine spacing and interference with tooling. Can this wedge be used for distributed clamping along a workpiece? Yes, the geometry and length allow multiple wedges to be positioned along the T-slot for distributed support and improved stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Thread Cutting Holder M14–M36 With Quick-Change, Axial Compensation, Ball Guide, DIN 69871 Form A - TECWERK
Take advantage of a compact, standards-compliant design combined with axial length compensation and a quick-change torque transfer system for reliable tapping across a wide thread range. Order the tool or consult Metav Werkzeuge for integration and supply. Threading chuck DIN 69871 Form A M14–M36 SK50 A‑L 140 mm (TECWERK) A threading chuck by TECWERK for secure tap holding and versatile use in CNC and toolroom applications Steep taper DIN 69871 Form A Axial length compensation on push and pull Ball guide bushing for controlled movement Quick-change insert for torque transfer Consistent tapping performance for demanding production The TECWERK threading chuck (SKU 2000832249NW) is engineered for repeatable results when machining threads from M14–M36. Its compliance with DIN 69871 Form A ensures compatibility with standard toolholders and machine spindles, while the SK50 shank provides robust connection to the spindle. The combination of a steep taper and a precisely guided bushing reduces runout and maintains tap alignment, which in turn minimises thread errors and rework. This yields a measurable increase in process stability and shorter cycle variability. Built-in axial compensation reduces tap breakage and downtime Featuring axial length compensation on push and pull, the chuck absorbs small axial misalignments that occur during tapping cycles. This function protects taps from excessive bending forces and sudden axial loads, lowering the risk of breakages in interrupted or deep-thread operations. As a result, tool life is extended and maintenance intervals are lengthened, delivering clear economic benefits in high-volume and batch-change settings. Secure guidance and reliable torque transmission Guidance is provided by a ball guide bushing, which ensures that the tap runs true and that axial movement remains controlled. Torque is transmitted via a quick-change insert, enabling efficient replacement without special tools and ensuring positive engagement during rotation. Together these features support both hand-tap and machine-tap styles, allowing flexible use across varied tapping tasks while keeping set-up times short. Practical dimensions and workshop integration The chuck’s measurable parameters — d 48 mm, A 140 mm, D 78 mm — make it straightforward to verify fitment in existing tool chains. Its execution with a quick-change mechanism simplifies retrofit into modular tooling systems and quickholder arrangements. Where machine uptime and predictable thread quality are priorities, this tap holder supplies a coherent balance of compact form, mechanical security and compatibility with established spindle tapers. Discuss integration and availability with Metav Werkzeuge — technical advice and delivery coordinated from our Emmerich site, eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data SKU: 2000832249NW Designation: Threading chuck DIN 69871 Form A M14–M36 SK50 A‑L 140 mm Product type: Threading chuck Core specifications Suitable for: M14–M36 Taper standard: DIN 69871 Form A Shank diameter d: 48 mm Length A: 140 mm Maximum diameter D: 78 mm Packing unit: 1 Features & functions Steep taper DIN 69871 Form A Axial length compensation on push and pull Ball guide bushing Quick-change execution for torque transmission SK50 shank FAQ Which thread sizes are supported by this chuck? The threading chuck supports thread taps from M14 to M36 and is specified as suitable for M14–M36 applications. How is torque transmitted to the tap? Torque is transmitted via a quick-change insert integrated into the toolholder; the quick-change execution enables secure torque transfer while simplifying insert replacement. Is the chuck compatible with standard DIN 69871 spindles? Yes. The chuck conforms to DIN 69871 Form A and is designed for machines accepting that taper, combined with an SK50 shank for robust spindle connection. What protection against axial load does the holder provide? The holder incorporates axial length compensation on both push and pull, which reduces stress peaks on the tap and lowers the likelihood of breakage in demanding cycles. Which guidance mechanism ensures accurate tapping? A ball guide bushing provides controlled guidance and improved concentricity during tapping, helping to maintain thread accuracy and reduce scrap rates. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
140mm T‑Slot Clamp Bar 18mm T‑Slot Height 0‑75mm M16×18×160 Clamp Bolt - AMF
Take advantage of the combination of precise T‑slot compatibility, a wide adjustable clamping range and the included M16 clamping screw for reliable fixturing; order directly via Metav Werkzeuge or ask the consultants for application advice. Clamping Claw No. 6321 — T‑slot 18 mm, clamping height 0–75 mm (AMF) A Clamping Claw No. 6321 designed for secure fixturing in 18 mm T‑slots, offering an adjustable clamping height from 0 to 75 mm for versatile workholding in machining and assembly setups. T‑slot 18 mm compatibility Adjustable clamp height 0–75 mm Includes M16 clamping screw Overall length 140 mm Secure, adjustable fixturing for T‑slot tables The clamping element delivers a practical solution for fast and repeatable workholding on machine and assembly tables with a T‑slot 18 mm standard. The adjustable clamping height 0–75 mm enables accommodation of varying workpiece profiles without additional shims, reducing setup time and minimising machine downtime. Where precise positioning is required, the device’s compact geometry supports consistent clamping pressure and alignment, making it suitable for small-batch production and flexible fixture concepts. Fast installation and reliable mechanical connection Designed to accept the supplied M16 clamping screw (M16 x 18 x 160), the unit simplifies installation by combining the clamping element with a compatible fastener ready for immediate use. The overall length 140 mm and width 17 mm provide a compact footprint that fits into common fixture patterns while maintaining the lever arm required for a secure hold. The integrated screw dimensioning gives a straightforward torque-to-clamp translation, enabling a controlled clamp force for stable machining or assembly operations. Streamline workshop inventory and production workflows As a purpose-built fixturing accessory from AMF, this clamp head is intended to integrate easily into existing tooling sets and modular fixturing systems. The compact form and standardised interface reduce the number of specialised parts on the shelf, while the unit’s adaptability supports multiple clamping tasks across different jobs. Metav’s role as a precision partner means access to a broad supply chain, fast replenishment and the reassurance of established quality standards backed by long-term customer trust. For reliable, versatile T‑slot clamping from AMF, contact Metav Werkzeuge to discuss suitability for specific fixtures or to place an order; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833068NW SKU: 4000833068NW Type: No. 6321 Brand: AMF Product type: clamping claw Specifications Clamping height: 0–75 mm T‑slot compatibility: 18 mm Overall length: 140 mm Width: 17 mm Included clamping screw: M16 x 18 x 160 Materials & features Packaging unit: 1 Ready for immediate installation with supplied clamping screw Compact design for modular fixturing Axite enrichment: Spannschraube M16 x 18 x 160; B2: 50 FAQ What T‑slot does this clamping element fit? The clamping component is designed specifically for an 18 mm T‑slot, ensuring compatibility with standard T‑slot tables and fixture plates. What is the adjustable clamping range? The device provides a clamping height of 0–75 mm, enabling secure holding of workpieces with varying thicknesses without additional spacers. Is a clamping screw supplied with the unit? Yes — the product includes an M16 clamping screw (M16 x 18 x 160) to facilitate immediate installation and consistent clamping performance. What are the physical dimensions relevant to fixture design? Key dimensions are overall length 140 mm and width 17 mm, useful for planning fixture layouts and ensuring adequate clearance. Can this clamp be used across different fixture systems? The standardised interface and compact form factor make the item suitable for integration into modular fixture systems where an 18 mm T‑slot is used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com