Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
130mm Vertical Clamp Three-Point Massive Holding Arm, 5,000 N Hold Force - Kukamet
The combination of a massive holding arm, compact dimensions and a 5,000 N holding force ensures reliable fixture performance and consistent clamping results. Order the component directly via Metav Werkzeuge or request technical advice from our consultants for swift integration into production. Vertical clamp 211 by Kukamet — 130 mm arm, 5,000 N holding force A Vertical clamp 211 engineered for secure, repeatable holding in fixtures and jigs, featuring a horizontal base and a robust holding arm for demanding workshop and production tasks Massive holding arm for stable clamping Horizontal base for fixture mounting 130 mm arm length for broad reach Up to 5,000 N static holding force Consistent force for repeatable production results The clamp delivers a holding force of 5,000 N and a maximum clamping force of 4,500 N, values that support repeatable fixturing and reduce rework. These figures indicate how firmly a workpiece is secured and how much dynamic clamping load can be applied; the former relates to secure static retention, the latter to the peak force applied during actuation. Specified forces allow process planners to match the clamp to machining and assembly cycles where defined, measurable performance is required. The compact design and measured output make the component suitable for production fixtures where predictable clamping is essential. Robust design and protective finish for workshop use Constructed with a massive holding arm and a blackened finish, the clamp is designed for regular industrial use. The substantial arm provides mechanical stability under load, while the blackened surface treatment gives a durable external layer that reduces surface glare and offers basic protection against wear. With a unit mass of 1.364 kg, the device remains compact enough for dense fixture layouts yet substantial enough to contribute to a stable clamping arrangement. These characteristics support long service intervals and predictable behaviour in demanding environments. Mounting flexibility and straightforward integration Equipped with a horizontal base, the clamp is intended for secure mounting to fixture plates and machine tables. The base configuration simplifies alignment in assemblies and is compatible with common fixture layouts, enabling integration into jigs, welding fixtures and assembly stations. The 130 mm arm length gives additional reach without compromising rigidity, allowing effective clamping of larger or irregularly positioned workpieces. Where repeatability and fast set-up are priorities, this clamp provides clearly defined mechanical parameters that can be incorporated into process documentation. Typical applications and process benefits The unit is suited to production and workshop tasks that require dependable, repeatable clamping: fixture plates, assembly jigs and repetitive machining set-ups benefit from the clamp’s measurable performance and compact footprint. By selecting a clamp with specified static and dynamic force values, engineers can reduce trial-and-error in fixture design and ensure that clamping behaviour aligns with machining and handling requirements. The device’s balance of reach, mass and holding capability supports efficient production workflows and contributes to higher first-pass yield. For a reliable fixture solution from stock at Metav Werkzeuge, request the Kukamet Vertical clamp 211 (SKU B211-5-D-C1) for technical consultation or a tailored quotation by contacting Metav Werkzeuge at info@metav-werkzeuge.com or calling +49 2822 7131930 Technical data SKU: B211-5-D-C1 GTIN: 8680731507775 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Core technical data Arm length: 130 mm Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Weight: 1.364 kg Special features Horizontal base mounting Massive holding arm Blackened finish Category: Spanner FAQ What is the maximum holding force of this clamp? The Kukamet Vertical clamp 211 has a maximum holding force of 5,000 N, specified for static retention in fixtures. How is the clamp mounted to a fixture plate? Mounting is performed via the horizontal base; the clamp’s base is designed for secure attachment to fixture plates and machine tables. What is the reach of the clamping arm? The clamping arm provides a reach of 130 mm, suitable for a broad range of workpiece sizes within compact fixture layouts. Is the surface treated for workshop environments? The clamp is supplied with a blackened finish, providing a durable outer layer and basic surface protection appropriate for workshop use. Which SKU should be ordered for this model? Order using SKU B211-5-D-C1 to ensure the correct Kukamet Vertical clamp 211 is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Horizontal Base, 5,000N Holding Force, Massive Arm & Safety Lock - Kukamet
Take advantage of a robust holding arm, mechanical safety locking and proven clamping capacity to secure components reliably in repetitive production tasks. The combination of sturdy construction, compact weight and easy horizontal mounting supports efficient workstation layouts. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 211 — horizontal-base lever clamp with 4,500 N clamping capacity (Kukamet) The Vertical clamp 211 is a lever-style vertical clamp designed for secure workpiece retention in machining and assembly fixtures, suitable for workshop and industrial jigs where compact, repeatable clamping is required. Massive holding arm and safety lock Horizontal base mounting Clamping force up to 4,500 N Holding force up to 5,000 N Consistent, measurable clamping for reliable processes The clamp delivers a defined clamping force of up to 4,500 N with a maximum holding force of 5,000 N, values that support reproducible set-ups and reduce repositioning time. Specified forces offer a clear basis for fixture design and safety calculations; the numerical ratings enable planners to compare alternative clamps objectively and to size tooling for process stability. The compact performance helps maintain cycle times while ensuring workpiece security during machining or assembly. Secure mounting and durable construction for everyday use A horizontal base enables flush mounting to fixture plates and tooling blocks, simplifying integration into existing jigs. The massive holding arm and mechanical safety lock reduce the risk of accidental release during handling or vibration-prone operations, enhancing operator safety and process reliability. The clamp’s blackened finish provides a corrosion-resistant surface that withstands workshop environments while keeping running tolerances and contact surfaces protected over time. Compact integration and practical workshop benefits Weighing approximately 1.51 kg, the device is light enough for retrofit into compact toolholders yet rigid enough to resist deflection under load. The lever-clamp design supports quick manual actuation and clear visual indication of engagement, which accelerates cycle times without adding complexity. As part of a broader tooling strategy, this clamp contributes to fewer supplier interfaces and dependable supply chains when ordered via Metav, a partner known for consistent inventory and expert advice. Contact Metav Werkzeuge to discuss the Kukamet Vertical clamp 211 and its suitability for specific fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: B211-5-D-L-C1 Model: 211 Manufacturer: Kukamet SKU: B211-5-D-L-C1 Facts Arm length: 130 mm Max clamping force: 4,500 N Max holding force: 5,000 N Weight: 1.51 kg ECLASS: 21041717 ETIM: EC011973 Special features Material: blackened finish Mounting: horizontal base Massive holding arm Safety locking mechanism FAQ What clamping and holding forces does the clamp provide? The Vertical clamp 211 offers a clamping force up to 4,500 N and a holding force rating of 5,000 N, values intended for reliable fixation in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is by a horizontal base that allows secure attachment to fixture plates and tooling blocks for compact integration. Does the clamp include a safety feature to prevent accidental release? Yes, the design incorporates a mechanical safety lock together with a robust holding arm to reduce the risk of unintended opening under vibration. Is the clamp suitable for retrofitting into existing fixtures? The compact weight of 1.51 kg and lever actuation make the unit suitable for retrofitting into many existing jigs where space is limited but rigid clamping is required. Which company supplies this model and how is it sourced? This model is supplied by Kukamet and distributed through Metav Werkzeuge; ordering via Metav ensures consistent availability and supply-chain reliability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust / 5kN Clamp Force, Blackened - Kukamet
Take advantage of a robust clamping solution that combines a massive holding arm, high clamping performance and compact mounting for reliable fixture stability in production. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Vertikalspanner 212 vertical clamp by Kukamet — massive holding arm, vertical foot mounting The Vertikalspanner 212 is a compact vertical clamp designed for secure workholding in jigs, fixtures and general workshop applications, combining high holding capacity with space-saving mounting. Robust 130 mm holding arm Vertical foot mounting for stable set-up Holding force up to 5,000 N Blackened finish for corrosion resistance Dependable clamping power for repeatable production quality The clamp brings consistent clamping performance to repetitive operations thanks to a high holding force of 5,000 N and an actuation force rating of 4,500 N, which together reduce part movement and rework. The massive holding arm transmits force evenly across the clamped component, improving repeatability in serial fixturing and supporting process reliability. These measurable values allow planners to assess suitability for specific machining and assembly tasks with confidence. Compact mounting that simplifies fixture design and set-up With a 130 mm arm and a vertical foot mounting, the device integrates into tight assemblies and upright fixture plates without major redesign. The modest mass of 1.381 kg keeps added load low while maintaining rigidity, so tooling plates remain stable during handling and machining. This combination shortens set-up times and supports more efficient jig layouts, helping to keep cycle times predictable in small-batch and series production. Durable finish and solid construction for low maintenance The clamp is manufactured with a blackened finish, giving enhanced surface protection and a subdued appearance suitable for workshop environments. The heavy-duty construction minimises wear under frequent use and helps preserve clamping accuracy over time, reducing maintenance intervals. The design intent focuses on straightforward longevity rather than complex servicing, which supports continuous operation in demanding applications. For reliable fixturing backed by Kukamet quality, contact Metav Werkzeuge to request a quotation or technical clarification on the Vertikalspanner 212 and its suitability for specific fixtures and jigs. Technical data Article number: B212-5-D-C1 GTIN: 8682843522363 Manufacturer: Kukamet Facts Arm length: 130 mm Maximum holding force: 5,000 N Maximum actuation/pressing force: 4,500 N Weight: 1.381 kg eClass: 21041717 ETIM: EC011973 Special features Massiver Haltearm (massive holding arm) Vertical foot mounting (senkrechter Fuß) Blackened finish (Schwarz brüniert) Category: Spanner FAQ What clamping and actuation forces does the clamp provide? The vertical clamp offers a holding force of 5,000 N and an actuation (pressing) force of 4,500 N, values that help assess suitability for machining and assembly fixtures using the Vertikalspanner 212 Is the clamp suitable for compact fixtures and upright plates? Yes, the vertical foot mounting and a 130 mm arm length make the device appropriate for compact jigs and upright fixture plates where space is limited How does the finish contribute to longevity? The blackened finish provides surface protection against corrosion and abrasion, reducing maintenance and helping to retain clamping accuracy over time Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Vertical Base, 4.5kN Thrust, 5kN Holding Force, Galvanised Heavy-Duty Arm - Kukamet
Benefit from the combination of a massive holding arm, a safety locking mechanism and zinc-plated corrosion protection for reliable, repeatable clamping in production environments. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Vertical clamp 212 – Kukamet, zinc-plated with safety lock The vertical clamp 212 is a lever-operated holding solution for fixtures and workbenches, designed for secure, repeatable clamping in industrial and workshop applications. Vertical mounting with foot base Zinc-plated body resists corrosion 130 mm robust holding arm Safety locking mechanism included Reliable clamping that keeps production moving The vertical toggle design delivers consistent closing action and rapid engagement, translating into shorter cycle times and fewer handling errors. With a clamping force max 4,500 N and holding force max 5,000 N, the device secures workpieces reliably during machining, assembly or inspection operations. The term clamping force refers to the active force applied to press the part in position, while holding force indicates the static retention capacity once the clamp is engaged. This distinction helps planners choose the right clamp for load-bearing or positioning tasks and reduces downtime due to slipping or repositioning. Durable construction for long service life Constructed from zinc-plated steel, the clamp resists surface corrosion common in workshop atmospheres, extending maintenance intervals and protecting contact faces. The massive holding arm increases rigidity under load and reduces vibration transfer to the clamped component, which benefits precision tasks. A safety locking mechanism prevents accidental release during vibration or impact; this mechanical lock secures the lever in its clamped position and supports operator confidence during repetitive operations. Simple integration into fixtures and workstations The vertical foot mounting allows direct attachment to plates, clamps or bespoke fixtures, offering compact installation and stable support. At 130 mm arm length and a weight of 1.32 kg, the unit balances accessibility with a small footprint, suitable for tight assembly cells or machine tables. The lever-operated action enables quick manual cycle times without auxiliary drives, while the robust design minimises the need for frequent replacements—supporting continuous production and predictable maintenance planning. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet vertical clamp 212 into production setups; our team in Emmerich can provide specification checks, delivery options and practical installation tips Technical data Article number: 212-5-D-L-C1 GTIN: 8680731501803 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 130 mm Clamping force max: 4,500 N Holding force max: 5,000 N Weight: 1.32 kg Special features Material: zinc-plated Mounting: vertical foot Massive holding arm Safety locking mechanism Lever clamp operation FAQ What is the difference between clamping force and holding force? Clamping force refers to the active pressing force (here 4,500 N) applied during engagement; holding force indicates the static retention capability (here 5,000 N) after the clamp is closed. The Kukamet vertical clamp 212 (SKU 212-5-D-L-C1) is specified with both values to support correct selection for machining and fixturing tasks. Is the clamp suitable for workshop environments with occasional moisture? Yes. The zinc-plated finish on the Kukamet vertical clamp provides basic corrosion resistance suitable for general workshop atmospheres, helping to protect surfaces and prolong service life without specialised coatings. How is the clamp mounted and what does vertical mounting mean? The clamp uses a vertical foot mounting arrangement, meaning the base is fixed to a horizontal surface so the lever and arm operate in a vertical plane—ideal for bench fixtures and machine tables where a compact, upright clamp is required. What advantages does the 130 mm arm length provide? A 130 mm arm gives a good balance between reach and leverage, allowing secure clamping of a variety of workpiece sizes while keeping the operating lever within comfortable reach for manual actuation. Can this lever clamp be used for repetitive automated sequences? The robust lever action and safety locking mechanism of the Kukamet vertical clamp 212 make it well suited to repetitive manual cycles and semi-automated stations; for fully automated use, ensure compatibility with the cell’s actuation methods and cycle timing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamp With Vertical Base, 4.5kN Thrust, 5kN Holding Force, Hardened Black Finish - Kukamet
Take advantage of a compact, robust clamping solution that combines a massive holding arm with safety lock, a 130 mm arm and reliable holding force up to 5,000 N for secure fixturing. Order the clamp directly via Metav Werkzeuge or contact our consultants for specification advice and dependable supply from Emmerich. Vertical clamp 212 – Kukamet vertical clamp with 130 mm arm and 5 kN holding force The Vertical clamp 212 is a vertical clamping device designed for secure fixturing in workshop and light industrial environments, offering a compact footprint and robust retention for repeatable setups. Massive holding arm with safety lock 130 mm effective arm length Up to 5,000 N clamping hold Dependable holding force that stabilises production The primary advantage of this clamping device is its consistent clamping performance. With a maximum holding force of 5,000 N and a maximum pressing force of 4,500 N, the clamp secures workpieces reliably during machining or assembly. Holding force refers to the tensile retention once the clamp is engaged, ensuring parts remain immobile under lateral or dynamic loads. For workshop managers and process engineers, this translates into fewer re-clamps, reduced rework and steadier cycle times. The combination of measured forces and mechanical design supports repeatability across batches and aids quality control. Compact footprint speeds up setup and saves bench space Fitted with a 130 mm arm and a vertical foot for upright mounting, the unit is optimised for areas where space is at a premium. The compact design reduces interference with tooling and allows closer placement of adjacent fixtures, shortening tool paths and improving accessibility. At approximately 1.32 kg, the clamp is lightweight enough for flexible fixturing yet solid in feel, making it suitable for modular jig systems and agile production cells. The smaller footprint supports efficient workstation layout and faster part loading and unloading. Safety features that protect operators and processes A prominent safety lock and a massive holding arm are integrated to prevent accidental release under load, which reduces the risk of mishaps and unscheduled downtime. The safety lock maintains clamping engagement even in the event of vibration or transient forces, providing operators with extra confidence during manual handling or automated cycles. From a compliance point of view, mechanical locking reduces reliance on additional secondary restraints and simplifies risk assessments for routine operations. Robust finish and low-maintenance reliability The clamp is finished in a blackened finish that offers corrosion resistance and a uniform, workshop-tolerant appearance. Constructed for regular industrial use, the device requires minimal maintenance: periodic inspection of the locking mechanism and occasional lubrication of pivot points keep performance consistent. The robust build and low service demands contribute to a lower total cost of ownership over time, supporting continuous production without frequent replacements. For secure, compact fixturing choose the Kukamet Vertical clamp 212 and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: B212-5-D-L-C1 Model: 212 Type: Vertical clamp Dimensions & Performance Arm length: 130 mm Weight: 1.32 kg Maximum pressing force: 4,500 N Maximum holding force: 5,000 N Features & Materials Material: blackened finish Attachment: vertical foot Massive holding arm Safety lock Category: Spanner FAQ What maximum load can the clamp retain? The clamp provides a maximum holding force of 5,000 N; the Vertical clamp 212 is specified to keep workpieces secure under the loads indicated. How is the clamp mounted to a fixture? Mounting is by a vertical foot; the Vertical clamp 212 is designed for upright installation on jigs and fixture plates. Is the locking mechanism reliable for vibration-prone processes? Yes, the integrated safety lock and massive holding arm minimise the risk of unintended release under vibration, making the clamp suitable for many workshop processes. What finish does the clamp have and how should it be maintained? The unit has a blackened finish that resists corrosion; routine lubrication of moving parts and visual inspections are sufficient to maintain serviceability. Can this clamp be used in automated clamping stations? The compact design and robust retention characteristics make the Vertical clamp 212 compatible with many automated or semi‑automated fixturing setups, subject to verification of forces and mounting details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Clamping Toggle Clamp With Massive Holding Arm, 5,000 N Holding Force - Kukamet
Take advantage of a combination of robust clamping force, a massive holding arm and a compact vertical mount to secure fixtures reliably in workshop and production settings. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice and rapid supply from Emmerich. Kukamet 212 Vertical Clamp — galvanised, heavy-duty with 130 mm arm A 212 Vertical Clamp designed for vertical mounting and reliable fixture clamping in general workshop and light industrial applications. Massive holding arm, 130 mm reach Galvanised steel construction Holding force up to 5,000 N Vertical foot mount for secure installation Stable clamping for repeatable production quality The clamp delivers dependable fixture retention through a massive holding arm and a high-rated holding force. With a maximum holding force of 5,000 N and a pressing capacity of 4,500 N, the device is intended to keep workpieces secure during machining and assembly operations. The result is fewer interruptions for repositioning and reduced scrap rates, supporting throughput and consistent output quality. The lever-style actuation provides rapid engagement and reliable lock‑up for repetitive tasks. Built for workshop conditions and low upkeep Constructed from galvanised steel, the unit resists typical workshop wear while remaining straightforward to maintain. The corrosion-resistant finish extends service life in mixed environmental conditions, while the modest weight of 1.381 kg keeps handling and installation manageable. These attributes combine to lower total ownership effort: effective protection from surface corrosion plus simple periodic inspections ensure steady performance over time. Space-efficient form that adapts to fixturing layouts The compact profile and 130 mm arm length make the clamp suitable for dense fixture arrangements where vertical clearance and footprint matter. The vertical foot mount allows the device to be fixed directly to plates or subplates, saving horizontal space and enabling close‑packed tooling. The lever action supports quick cycle times and facilitates ergonomic operation when multiple clamps are used across a fixture. Practical integration into production workflows Designed as a pragmatic tool for everyday production use, the clamp supports straightforward integration into jigs and fixtures without complex adaptations. The galvanised body and robust arm provide secure installation and predictable behaviour under load, which simplifies process planning and reduces the need for contingency measures. For detailed layout planning, refer to the technical sheet and component dimensions to match fixture tolerances and mounting patterns. For tailored fixturing solutions including the Kukamet 212 Vertical Clamp, contact Metav Werkzeuge in Emmerich for specification support and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data SKU: 212-5-D-C1 GTIN: 8680731501773 EClass: 21041717 ETIM: EC011973 Facts Arm length: 130 mm Max holding force: 5,000 N Max pressing force: 4,500 N Weight: 1.381 kg Special features Material: galvanised steel Mounting: vertical foot Massive holding arm Lever clamp type FAQ What clamping and holding forces does the clamp provide? The Kukamet 212 vertical clamp specifies a maximum holding force of 5,000 N and a maximum pressing (clamping) force of 4,500 N. Which construction material is used for the clamp? The device is made from galvanised steel, providing enhanced surface protection suitable for workshop environments. How is the clamp mounted in a fixture? Mounting is via a vertical foot, intended for direct bolting to plates or subplates to enable compact fixturing. What are the arm length and the unit weight? Arm length is 130 mm and the unit weight is 1.381 kg. Is routine maintenance required to preserve performance? The galvanised finish reduces corrosion risk; regular visual inspection and standard lubrication of moving parts are recommended. Specific maintenance intervals are not specified in the basic data. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
130mm Vertical Toggle Clamp 4.5kN Thrust, Massive Holding Arm, Zinc Plated, 5kN Hold - Kukamet
Take advantage of a robust clamping solution that combines a galvanised finish, a massive hold arm and up to 5,000 N holding force for dependable workholding in jigs and fixtures; order via Metav Werkzeuge or consult the specialists for matching accessories and mounting advice. Vertikalspanner 211 — Vertical clamp with 130 mm arm, galvanised (Kukamet) A Vertikalspanner 211 is a lever-operated vertical clamp intended for secure, repeatable clamping in workshop fixtures and production jigs. Galvanised corrosion-resistant finish 130 mm solid hold arm Holding force up to 5,000 N Horizontal-foot mounting Consistent clamping force for reproducible results The 130 mm arm and massive hold arm construction deliver stable leverage and reduced flex during operation, providing a 5,000 N holding force with a maximum pressing capacity of 4,500 N. These measurable values translate into fewer rework cycles and a steadier production flow since the clamp maintains consistent contact pressure across repetitive cycles. Integrating this vertical clamp into a fixture reduces setup variation and supports process reliability in small-batch and series manufacturing. Robust finish and compact mounting for everyday workshop use A galvanised finish protects exposed surfaces against corrosion, supporting longer service life in workshop environments where humidity or coolant exposure may occur. The horizontal-foot mounting design simplifies installation to plates and fixtures, while the clamp’s compact mass of 1.364 kg makes integration into jigs straightforward without adding excessive weight. These practical attributes reduce maintenance frequency and make the device suitable for bench-mounted fixtures or welded bases in assembly operations. Efficient lever operation tailored to fixture and jig applications Designed as a lever clamp, the unit enables fast manual actuation and secure vertical locking, accelerating cycle times on test rigs, assembly stations and custom tooling. The geometry of the clamping arm and the specified forces make this device well suited to repeatable positioning tasks and light to medium-duty machining or assembly work. The item is supplied under the Kukamet brand and carried by Metav Werkzeuge for consistent availability and quality assurance. Contact Metav Werkzeuge for tailored selection advice or to confirm compatibility with existing fixtures; Metav Werkzeuge’s specialists in Emmerich can advise on suitable mounting plates and delivery options Technical Data Article number: 211-5-D-C1 GTIN: 8680731501407 Weight: 1.364 kg Arm length: 130 mm Core specifications Max holding force: 5,000 N Max pressing force: 4,500 N Mounting: horizontal foot eCl@ss: 21041717 ETIM: EC011973 Special features Galvanised finish Massive hold arm Lever-operated vertical clamp Suitable for fixtures and jigs FAQ What maximum holding and pressing forces does the Vertikalspanner 211 provide? The Vertikalspanner 211 offers a holding force of up to 5,000 N and a maximum pressing force of 4,500 N, suitable for secure workholding in repetitive tasks. How is the clamp mounted to a fixture or plate? Mounting is achieved via a horizontal-foot configuration; the Vertikalspanner 211 is designed for straightforward bolting to plates and jig bases. What protective finish does the product have and what does that mean for workshop use? This clamp features a galvanised finish, which enhances corrosion resistance and helps to extend service life in humid or coolant-exposed workshop environments. Is the Vertikalspanner 211 suitable for quick manual operation in assembly lines? Yes, the lever-operated vertical design enables fast manual actuation and reliable locking, making the Vertikalspanner 211 appropriate for assembly and testing stations. Which brand manufactures this vertical clamp and what is the SKU for ordering? The clamp is produced by Kukamet and is listed under SKU 211-5-D-C1 for ordering and stock reference. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
131mm MK3 x B16 Taper Arbor Hardened And Ground With DIN 238 Drill Chuck Mount - TECWERK
Take advantage of the combination of precision, robust toolholding and straightforward compatibility to maintain consistent machining tolerance and minimise unplanned downtime; order the taper arbor directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK taper arbor MT3 to B16 — hardened and ground, 131 mm TECWERK taper arbor MT3×B16, designed for reliable mounting of drill chucks on drilling and turning machines Drill-chuck taper DIN 238 compatible Fully hardened and ground finish Morse taper MT3 external taper For mounting drill chucks on lathes and drills Precision toolholding to boost machining accuracy This taper adaptor delivers precise concentricity and consistent runout control by combining a Morse taper MT3 external taper with a matched B16 shank interface. The adherence to DIN 238 for the drill-chuck taper ensures compatibility with common chucks, translating into repeatable hole positions and reduced scrap rates. For production environments where dimensional consistency is critical, the adaptor provides a measurable improvement in process stability and setup repeatability. Durable construction that reduces maintenance intervals Constructed in a fully hardened and ground execution, the arbor resists wear at contact surfaces and maintains seating accuracy over prolonged use. The heat treatment and finishing process minimise fretting and micro-movements between taper surfaces, lowering the frequency of regrinding or replacement. Workshops benefit from fewer interruptions and predictable maintenance cycles, which supports higher machine availability and lower total cost of ownership. Seamless compatibility for quick integration into existing fleets The arbor is engineered to accept standard drill chucks via the DIN 238 chuck taper and mates with machines using a Morse taper MT3 nose. The B16 shank provides a conventional connection for many drill and lathe tailstocks or spindle noses, so adaptation is straightforward and does not require special fixtures. This compatibility shortens setup times and simplifies tooling logistics across small-batch and serial production. Practical advantages for workshop and toolroom workflows For metalworking shops, maintenance departments and toolrooms, the adaptor supports flexible toolholding strategies: exchange chucks quickly, perform bench-mounted drilling or transfer operations between machines with minimal rework. The robust finish and standard interfaces make it suitable for repetitive use in production and for demanding reaming or drilling tasks. If questions arise about suitability for a particular machine or chuck, technical consultation is recommended to confirm fit and function. For reliable toolholding with proven compatibility, choose the TECWERK taper arbor — contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832336NW Manufacturer: TECWERK Product type: Taper arbor Facts Overall length: 131 mm Taper: Morse taper MT3 Shank: B16 Standard: DIN 238 Package unit: 1 Special features With drill-chuck taper DIN 238 Fully hardened and ground For mounting drill chucks on drilling and turning machines Hardened and ground execution FAQ What taper standard does the arbor use? The arbor uses a Morse taper MT3 external taper for spindle seating and a B16 shank interface to mate with conventional machine fittings. Is the arbor suitable for mounting drill chucks? Yes, the arbor is designed to receive drill chucks via the DIN 238 chuck taper; the chuck itself is not included. How does the hardened and ground finish benefit workshop use? The hardened and ground surfaces maintain seating accuracy, reduce wear and limit fretting, which extends service life and preserves concentricity during repeated mountings. Which machines can use this taper arbor? The unit is intended for drilling and turning machines that accept Morse taper MT3 spindles and a B16 shank connection; compatibility depends on the machine’s spindle or arbor configuration. Can the arbor be used in precision production environments? Yes, by combining MT3 taper geometry with the DIN 238 chuck taper and a hardened finish, the arbor supports precision toolholding suitable for controlled production processes. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
132mm Three-Point Chuck, 3-Jaw, 1500 kgf Clamping Force, 2500 rpm Accuracy 0.03 - Vertex
High clamping force and consistent precision make this three‑jaw chuck a reliable choice for repetitive turning tasks; its 132 mm diameter with a rated clamping force of 1500 kgf ensures secure workholding, while an accuracy of 0.03 supports tight tolerances. Order the VSC-5 directly via Metav Werkzeuge or ask our consultants if needed. Vertex VSC-5 three‑jaw chuck — 132 mm diameter, 1500 kgf clamping force The Vertex VSC-5 is a three‑jaw chuck engineered for secure, repetitive workholding on lathes and turning centres, offering robust clamping for medium‑duty production environments High clamping force 1500 kgf 132 mm nominal diameter Precision accuracy 0.03 Max. speed 2,500 r.p.m. Secure workholding that reduces rework The VSC-5 delivers a measurable benefit in process reliability thanks to its high clamping force and consistent gripping behaviour. With a rated 1500 kgf of clamp capacity, the chuck maintains component position during machining, which reduces vibration and the likelihood of rework. The design focuses on a single core advantage per setup: reliable fixation that contributes directly to higher first‑pass yield in batch turning operations. Precision that supports tighter tolerances Engineered for repeatability, the chuck provides a defined concentricity performance that is reflected in the specified 0.03 mm accuracy and a nominal seating size of 132 mm. These figures indicate stable positioning across successive clamping cycles and help to maintain uniform part geometry. The specification for rotational speed up to 2,500 r.p.m. ensures the unit is suitable for common turning speeds used in conventional and CNC lathes while keeping balance and concentricity under control. Practical integration with machine tools The three‑jaw configuration offers a straightforward solution for round and hexagonal stock where centred gripping is required. The configuration supports quick mounting and repeatable centring on standard chucks and spindle interfaces, making the unit compatible with everyday workshop workflows on the lathe. The emphasis on a clear mechanical advantage—secure grip combined with straightforward setup—minimises downtime between batches and simplifies operator routines. Built for steady production and dependable supply Manufactured by Vertex and listed through Metav as a European supply option, this chuck is aimed at workshops needing dependable parts availability and consistent quality. The construction targets long service intervals and dependable repeatability to support ongoing production. Selecting components with documented technical values helps to build predictable processes and reduces unplanned stoppages in the machining cycle. Contact Metav Werkzeuge to specify the Vertex VSC-5 for high clamping‑force turning operations and arrange prompt delivery from Emmerich; our consultants will advise on compatibility and lead times Technical data Article number: VSC-5 GTIN: 4061905096037 Manufacturer: Vertex Facts Diameter: 132 mm Accuracy: 0.03 Maximum speed: 2,500 r.p.m. Clamping force: 1,500 kgf Special features Three‑jaw configuration ECLASS: 21020590 SKU: VSC-5 Images available in product gallery FAQ What materials can be machined with this chuck? The chuck is a mechanical workholding device; material suitability depends on the mounted tool and machine setup rather than the chuck itself, and the VSC-5 is commonly used for turning a wide range of metals when paired with appropriate tooling. What does the accuracy value 0.03 indicate? The stated 0.03 figure refers to the precision target for concentricity and repeatable positioning of the workpiece when clamped in the VSC-5, supporting consistent part geometry across batches. Is the VSC-5 suitable for high‑speed turning? The specification lists a maximum rotational speed of 2,500 r.p.m., which makes the chuck suitable for many standard turning applications; higher speeds should be evaluated against machine balance and workpiece geometry. How is the clamping force specified expressed in practical terms? The 1,500 kgf rating describes the mechanical clamping capacity of the chuck, indicating strong retention for medium‑duty turning operations and improved resistance to axial and radial displacement during machining. Which Vertex model number should be quoted when ordering? Quote the model VSC-5 and the GTIN 4061905096037 to ensure the correct three‑jaw chuck version is supplied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
132mm Universal Centre With Live Centre Mounting, 0.005mm Accuracy, Alloy Steel - Vertex
Take advantage of precision, robust alloy construction and high operational speed for dependable spindle support and consistent concentricity in turning operations. Benefit from a compact 132 mm length and a runout tolerance of 0.005 mm that together maintain machining quality and repeatability. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Universal live centre VPC-MT2 — alloy steel, 132 mm by Vertex Universal live centre VPC-MT2 for lathe work, providing revolving tailstock support and stable axial alignment across general turning applications Universal revolving centre for lathes Accuracy within 0.005 mm Up to 2,800 rpm operational speed Alloy steel construction for long service life Precision where concentricity matters The revolving tailstock point delivers a defined support point that reduces axial runout and maintains workpiece concentricity throughout turning cycles. Built to an accuracy of 0.005 mm, the centre stabilises the cutting process, which translates into fewer rework cycles and improved first-pass yields. The close tolerance is particularly beneficial when producing tight-shaft diameters or precision components where concentricity is decisive for assembly or balancing. Stable performance at practical spindle speeds Rated for operation up to 2,800 rpm, the centre is suitable for a broad range of workshop turning speeds without compromising bearing life. Its rotating bearing assembly minimises friction and heat generation, supporting continuous operation during longer batch runs. The modest weight of 0.5 kg and compact profile help maintain lathe balance and reduce axial deflection, supporting reliable machining of medium-duty parts. Durable construction for everyday workshop use Manufactured from alloy steel, the centre is engineered for wear resistance and dimensional stability under cyclic loading. The material choice safeguards the running surface against premature abrasion, extending service intervals and lowering lifetime costs. The robust construction makes the centre a sound component for mixed-material workflows where consistent support and repeatability are required. Practical dimensions and workshop integration With a length of 132 mm, the centre suits common tailstock configurations and leaves sufficient engagement for shorter and medium workpieces. The compact form factor eases storage and handling while the balanced design supports steady rotation under typical lathe forces. Where interchangeability and compatibility with existing setups are priorities, the compact profile and industry-standard format facilitate straightforward use in general workshop environments. Contact Metav Werkzeuge in Emmerich for tailored application advice and ordering details; the Metav team provides technical guidance and reliable European supply from stock Technical Data SKU: VPC-MT2 GTIN: 4061905085635 Manufacturer: Vertex Facts Length: 132 mm Weight: 0.5 kg Maximum speed: 2,800 rpm Accuracy (runout): 0.005 mm Special features Material: alloy steel Revolving/live centre design Compact form factor for standard tailstocks FAQ What turning applications suit this live centre? The VPC-MT2 universal live centre is designed for general lathe work where axial support and concentricity are required; it performs well on medium-duty turning tasks and routine batch production. How does the VPC-MT2’s accuracy affect finished parts? An accuracy of 0.005 mm reduces runout-related errors, improving surface finish and dimensional repeatability for turned components produced with the centre. Is the material suitable for heavy-duty machining environments? Constructed from alloy steel, the centre offers enhanced wear resistance for everyday workshop use; for extreme-duty or specialised alloys, application-specific assessment is recommended. Which lathe speeds are appropriate for this centre? The centre is rated up to 2,800 rpm, covering a wide range of common turning speeds without compromising bearing durability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
132x185mm Tilting Vice Table 45° Swivel, 95mm Height, 6 Kg Load Capacity - Vertex
Take advantage of the combination of FC25 cast iron stability, a compact 132×185 mm work surface and a 45° swivelling function to speed up setup times and secure small workpieces with repeatable accuracy. Order the VP-180 directly via Metav Werkzeuge or ask the Metav consultants for application advice. Vertex VP-180 Tilting Clamping Table – 45° swivel, 132×185 mm work surface The VP-180 tilting clamping table is a compact workholding device designed for precise angular positioning in milling, drilling and inspection tasks. Swivels 45° for angular clamping Compact table 132×185 mm FC25 cast iron body for stability Max load 6 kg for small workpieces Stable base for repeatable precision The VP-180 is built from FC25 cast iron, a material chosen for its excellent damping and dimensional stability. This construction reduces vibration during machining, which in turn preserves tool life and improves surface finish. The 132×185 mm top provides a defined clamping area that is easy to align on small milling machines or inspection benches; the low centre of gravity, ensured by a weight of 7.38 kg, keeps the unit secure under load. For users unfamiliar with material grades, FC25 refers to a grey cast iron grade commonly used in machine components where stiffness and vibration absorption are required. Faster setups with accurate angular clamping A 45° swivel capability allows angled operations to be completed without repeated repositioning of the workpiece, saving time and reducing cumulative alignment errors. The tilting mechanism is engineered for stable indexing so that once an angle is set it remains fixed under machining forces. With a max load of 6 kg, the device is suited to smaller components and precision fixtures where control and repeatability matter more than raw clamping capacity. The workholding concept reduces auxiliary operations and supports more efficient batch processing for small to medium series. Compact, easy to integrate into existing workflows At a height of 95 mm, the unit integrates smoothly into many machine set-ups and measuring stations without raising the centre of operation excessively. The compact footprint and predictable mounting interfaces simplify fixturing and allow the table to be combined with modular clamps or vices. Routine maintenance is straightforward: surfaces should be kept clean and light lubrication applied to the swivel joint to maintain smooth indexing. The design supports quick adoption in workshops seeking a reliable, cost-effective solution for angled clamping and inspection. For compact, accurate angular clamping from Vertex, contact Metav Werkzeuge in Emmerich for tailored advice and ordering support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VP-180 GTIN: 4061905084287 ECLASS: 21020702 Core figures Weight: 7.38 kg Height: 95 mm Table surface: 132×185 mm Max load: 6 kg Materials / Special features Material: FC25 cast iron Function: Swivels 45° Type: Tilting clamping table FAQ What is the maximum load capacity of the VP-180? The VP-180 tilting clamping table has a maximum load capacity of 6 kg, suitable for small components and precision fixtures. Which material is used for the body and why is it important? The body is made of FC25 cast iron; this material provides vibration damping and dimensional stability, which improves surface finish and tool life during machining. How large is the usable table surface? The usable table surface measures 132×185 mm, providing a compact yet well-defined area for clamping small workpieces and fixtures. Can the table be integrated into existing milling or inspection setups? Yes, with a height of 95 mm and a compact footprint, the unit is designed for straightforward integration into many machine tables and inspection benches. Is the swivel angle fixed or adjustable? The clamping table swivels 45°, enabling angled machining operations without repeated repositioning of the workpiece. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
133mm Precision Angle Clamping Mount Height-Adjustable Rotating, T-Slot M12 - Vertex
Take advantage of the combination of precision, robust stability and flexible fixturing to speed up setup times and improve repeatability on the shop floor. Order the Vertex VUA-408 directly via Metav Werkzeuge or contact our advisers for specification guidance. VUA-408 Precision Clamping Angle — height-adjustable and rotatable (Vertex) The VUA-408 Precision Clamping Angle is a height-adjustable, rotatable clamping solution intended for accurate fixturing on machine tables and inspection setups Height-adjustable, rotatable clamping geometry Robust base: 110 x 182 mm footprint Compatible with 100 x 200 mm machine tables T-slot M12 for secure fixture mounting Faster setups and measurable repeatability The VUA-408 delivers precision fixturing that reduces setup time and minimises rework. The height-adjustable and rotatable design allows components to be positioned quickly and locked in place without complex shims or auxiliary tooling. The presence of a T-slot M12 means standard clamping bolts can be used to secure the angle directly to fixtures or machine tables; for operations that require repeated referencing, this configuration improves positional repeatability and shortens overall cycle time. Stable support for machining and inspection A substantial mass and contact area contribute to consistent results during machining or metrology checks. With a footprint of 110 x 182 mm and a gross mass of 15 kg, the unit resists vibration and maintains orientation once clamped. This inherent stability benefits both cutting and measuring tasks by reducing chatter, lowering the risk of part deviation and enabling tighter tolerances to be maintained without elaborate damping measures. Flexible fixturing compatible with common tables Designed for integration with common machine and inspection tables, the angle is compatible with 100 x 200 mm table patterns and accepts M12 T-slot mounting. This makes the device suitable for a range of components and fixture setups found in production, toolroom and quality departments. The rotatable head permits angular adjustments without unclamping the base, offering a practical way to adapt to varying workpiece geometries while maintaining a single datum reference. Practical benefits on the workshop floor Beyond technical advantages, the clamping angle simplifies daily workflows: fewer setup steps, reliable clamping interfaces and less reliance on bespoke fixtures. For operations seeking productivity gains, the combination of robust construction and convenient adjustment supports faster throughput and steadier quality. Supplied as a compact, ready-to-install item, the unit integrates into existing fixturing strategies with minimal additional tooling. Contact Metav Werkzeuge in Emmerich for tailored fixturing advice and to arrange delivery of the Vertex VUA-408 — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VUA-408 GTIN: 4061905085048 Manufacturer: Vertex Weight: 15 kg Height: 133 mm Footprint: 110 x 182 mm Machine table compatibility: 100 x 200 mm T-slot size: M12 Facts Weight: 15 kg Height: 133 mm Footprint: 110 x 182 mm Machine table: 100 x 200 mm T-slot: M12 Special features Height-adjustable and rotatable Designed for machine table fixturing T-slot M12 mounting SKU: VUA-408 FAQ What applications is this clamping angle intended for? The VUA-408 is intended for precision fixturing on machine tables and inspection setups where controlled angular positioning and stable support are required. How is the VUA-408 mounted to a machine table? Mounting is achieved via the integrated T-slot interface; the unit accepts M12 clamping hardware for secure attachment to compatible 100 x 200 mm table patterns. Does the device require additional fixtures to allow rotation? No additional fixtures are required for basic rotation; the height-adjustable and rotatable mechanism permits angular adjustment and locking without auxiliary shims. What are the physical dimensions relevant for bench or table planning? Key dimensions are a footprint of 110 x 182 mm and an overall height of 133 mm, with a mass of 15 kg—useful for planning base support and clamping arrangements. Is the VUA-408 suitable for repeated production referencing? Yes. The combination of stable mass, secure M12 T-slot mounting and adjustable geometry makes the VUA-408 well suited for repeated referencing in production and inspection processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
133mm Precision Clamping Angle, Height Adjustable and Rotary, 126x250mm Table M12 T-Slot - Vertex
Benefit from a compact footprint, robust mass and precise adjustment range to secure repeatable set-ups and fast changeovers on inspection and small-machine tables. Order the VUA-510 directly via Metav Werkzeuge or consult our advisers for application-specific guidance. VUA-510 Precision angle clamp — height-adjustable and rotatable by Vertex The VUA-510 is a height-adjustable, rotatable precision angle clamp designed for accurate workholding and set-up tasks on inspection tables and small machine tables. Height-adjustable and rotatable design Measuring table 126 x 250 mm T‑slot M12 for secure clamping Compact base 110 x 182 mm Stable, repeatable workholding for precision setups The VUA-510 delivers a stable platform for precise alignment thanks to its substantial mass and compact footprint. The compact base 110 x 182 mm and overall weight of 18.1 kg minimise movement under load, providing repeatable orientation during measurement and machining operations. The combination of a firm base and clearly defined datum faces simplifies fixture planning and reduces rework, which supports efficient batch processing and inspection regimes. Fast alignment with height and swivel adjustment Adjustability is central to the unit’s efficiency: the height-adjustable and rotatable features permit rapid orientation of parts without reclamping. This flexibility reduces setup time and increases throughput by allowing multiple faces to be accessed from a single clamping operation. The swivel axis is engineered for controlled movement, enabling fine alignment for measurement routines and small-scale machining tasks where secure, accurate positioning is required. Designed to integrate with inspection and machining workflows The measuring table 126 x 250 mm and the T‑slot M12 enable straightforward attachment of clamps, fixtures and gauges commonly used in metrology and workshop environments. Integration with surface plates, small machine tables and modular fixture systems is facilitated by the generous table area and standard T‑slot format, making the unit suitable for assembly, quality control and prototype work where reliable workholding speeds up verification and reduces bottlenecks. Durable geometry and quality manufacturing for consistent results Constructed with precision geometry and a focus on longevity, the angle clamp maintains alignment across repeated cycles. The solid mass and engineered contact surfaces preserve set-up integrity, lowering the risk of position drift during measurement or light machining operations. Supplied under the Vertex range, the unit supports a professional shop floor approach where durability and consistent performance are prerequisites for predictable production results. For flexible, repeatable set-ups with Vertex precision, contact Metav Werkzeuge to arrange supply of the VUA-510 from our Emmerich stock or to request technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VUA-510 GTIN: 4061905087271 Manufacturer: Vertex Key dimensions Base (foot): 110 x 182 mm Measuring table: 126 x 250 mm Height: 133 mm Weight: 18.1 kg T‑slot: M12 Features Height-adjustable Rotatable eClass: 21020601 Category: Vertex FAQ What are the measuring table dimensions? The measuring table on the VUA-510 is 126 x 250 mm, providing a stable area for fixtures and gauges. Does the device allow height and swivel adjustment? Yes, the unit features both height-adjustable and rotatable functions to simplify multi-face alignment. What clamping interface is provided? Clamping is via a standard T‑slot M12, suitable for common clamping elements and fixtures. Which applications suit this angle clamp? The device is intended for precision workholding, inspection set-ups and small-part machining tasks where stable orientation is required. What are the base and overall dimensions? The compact base measures 110 x 182 mm, overall height is 133 mm and the unit weighs 18.1 kg. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
135mm Universal Machine Vise Reinforced Left-Handed, 0.01mm Accuracy - Vertex
Take advantage of the force‑amplified design and a substantial 40 kN clamping force combined with a wide 0–165 mm opening for secure, time‑saving workholding; order this vice directly via Metav Werkzeuge or request application advice from the consultants. VQCV-125H-L Universal Machine Vice (left‑hand, force‑amplified, Vertex) The VQCV-125H-L is a mechanical, force‑amplified universal machine vice designed for secure clamping across milling and general machining tasks Force-amplified design with 40 kN clamping force Left-hand version for specialised setups Opens 0–165 mm for wide workpiece range High positional accuracy of 0.01 mm Consistent clamping for uninterrupted machining The VQCV-125H-L delivers a force‑amplified clamping mechanism that converts operator input into significantly higher holding force, specified at 40 kN, ensuring workpieces remain immobile during heavy cuts. This conversion reduces repeated re‑clamping and minimises the need for corrective measures, improving cycle stability on the machine table. The vice’s 0–165 mm opening range accommodates a broad variety of parts, lowering the number of different vices required in a busy toolroom. The substantial mass and compact footprint contribute to inherent stability, enabling confident machining of tougher operations without compromising setup speed. Precision and repeatability that protect tolerances Positioning is specified to 0.01 mm, which corresponds to repeatability in the ten‑micron range and supports close tolerance work. Such positional accuracy is advantageous when performing multiple operations that demand consistent datum referencing, because the clamping system preserves alignment between setups. Where inspection and quality traceability matter, this level of control reduces scrap rates and the need for secondary finishing. Technical design elements that govern jaw parallelism and spindle interaction ensure that the measured accuracy translates into real‑world repeatability on the shop floor. Robust, workshop‑ready construction for daily use Built for demanding environments, the machine vice combines a compact external profile (135 x 477.5 x 180 mm) with a working mass of 53 kg, providing the inertia required to damp vibration under load. The left‑hand execution offers flexible integration into fixtures and special arrangements where handedness is a factor. The universal configuration and force‑amplified operation make the vice suitable for sequential machining tasks on small to medium machines, shortening tool changes and reducing fixture handling. The overall design aims for longevity in industrial use while keeping maintenance straightforward, thus supporting consistent throughput. Integration into procurement and supply chains Sourcing the VQCV-125H-L through Metav Werkzeuge gives access to a broad inventory, described by Metav as a practical "quality filter" for the European market. Rapid dispatch options and a comprehensive product range help to consolidate procurement and reduce lead times for production lines. Metav’s experienced advisory service is available for technical clarification and application matching, while the documented specifications—such as 40 kN clamping force, 0–165 mm opening and 0.01 mm accuracy—provide a clear basis for planning Fixturing and Process Control. For workshops seeking dependable, repeatable clamping, this vice supports both productivity and quality objectives. Contact Metav Werkzeuge to discuss application suitability of the Vertex VQCV-125H-L, arrange supply or obtain detailed technical advice by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: VQCV-125H-L GTIN: 4061905083372 ETIM: EC002173 Type: Mechanical Manufacturer: Vertex Facts Opening: 0–165 mm Dimensions: 135 x 477.5 x 180 mm (L x W x H) Weight: 53 kg Clamping force: 40 kN Accuracy: 0.01 mm EClass: 21020601 Special features Universal machine vice Left‑hand execution Force‑amplified / power‑enhanced design Rapid dispatch noted in product description FAQ What clamping force does the vice provide? The VQCV-125H-L offers a clamping force of 40 kN, providing robust holding power for heavy machining tasks. Which opening range is suitable for workpieces? This universal machine vice supports an opening range of 0–165 mm, allowing a wide variety of part sizes to be secured. How precise is the VQCV-125H-L in repeated setups? The vice is specified with an accuracy of 0.01 mm, delivering repeatable positioning for tight tolerance work. Is this a left‑hand or right‑hand version? The supplied model is the left‑hand execution of the force‑amplified universal machine vice. Can Metav Werkzeuge provide application advice for this vice? Metav Werkzeuge can advise on the application suitability of the Vertex VQCV-125H-L and support procurement decisions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
136mm Assembly Aid Movable, DIN 69871A - Vertex
Take advantage of a compact, compliant mounting solution that streamlines tool handling while keeping the workshop workflow efficient; the movable design and DIN 69871A compatibility ensure quick, repeatable set-up. Order the unit directly via Metav Werkzeuge or ask our consultants for application advice. Assembly Aid VTL-BT40 — Movable BT40 mounting, DIN 69871A A Assembly Aid VTL-BT40 engineered for safe, flexible positioning of BT40 toolholders and designed to match the DIN 69871A spindle interface for reliable workshop integration DIN 69871A compatibility for spindle mounting Movable design for flexible positioning Compact base 117x91 mm for small footprints Robust weight 4.3 kg for stable handling Faster set-up, fewer interruptions The VTL-BT40 delivers measurable time savings during tool change and set-up sequences by offering a purpose-built mounting surface that matches the BT40 taper. Compatibility with DIN 69871A means the unit aligns with common spindle standards, reducing the need for adapters and ensuring that toolholders seat accurately. This reduces rework caused by misalignment and shortens machine downtime, which translates into improved line efficiency and predictable cycle planning. The design supports efficient workflows without adding complexity to existing processes. Stable handling in a compact footprint With a base of 117 x 91 mm and a height of 136 mm, the device occupies minimal bench space while providing a stable platform for assembly tasks. The 4.3 kg mass gives the fixture inherent stability, limiting vibration during handling and placement of toolholders. For workshops where bench space is at a premium, this compact footprint allows closer organisation of tools and accessories, improving ergonomics and contributing to a tidier, safer working environment. The movable configuration permits quick repositioning without compromising steadiness. Built for routine workshop reliability Constructed to serve as a practical aid for repetitive mounting operations, this product supports consistent, repeatable handling of tapered tooling. The movable character of the fixture assists technicians when aligning and loading holders into machines, streamlining set-up steps that otherwise consume skilled time. Where traceability and conformity to standards matter, the adherence to DIN 69871A provides assurance that the assembly procedure meets established machine-interface norms. The result is a dependable accessory that integrates smoothly into day-to-day production. Contact Metav Werkzeuge for tailored advice on integrating this Vertex BT40 mounting aid into existing processes — Metav Werkzeuge combines decades of precision expertise with a comprehensive product range to simplify procurement and ensure the right fit for every workshop. Technical data SKU: VTL-BT40 GTIN: 4061905090578 Brand: Vertex Facts Height: 136 mm Base dimensions: 117 x 91 mm Weight: 4.3 kg eClass: 21029203 Special features Movable configuration BT40 taper interface Compliance with DIN 69871A FAQ Is the mounting aid compatible with all BT40 toolholders? Yes. The Assembly Aid VTL-BT40 is designed for BT40 taper toolholders and matches the DIN 69871A interface to ensure correct seating of compatible holders. What are the physical dimensions and weight for bench planning? The unit measures 136 mm in height with a base of 117 x 91 mm and weighs 4.3 kg, making the VTL-BT40 compact yet stable for bench use. Does the product conform to recognised spindle standards? Compliance with DIN 69871A is specified for the VTL-BT40, providing compatibility with standard BT40 spindle interfaces. Can the movable design withstand regular workshop handling? The movable configuration of the VTL-BT40 is intended for routine repositioning and assembly tasks; its mass and base size support stable handling during normal use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
136mm HSK 63 Coolant Transfer Tube Key, Total Length 136mm - TECWERK
Robust engagement for HSK 63 connections and a 136 mm working length deliver reliable handling and improved service times; order supply or request advice directly through Metav Werkzeuge for fast fulfilment. Key HSK 63 for coolant transfer pipes, 136 mm — TECWERK Key HSK 63 for coolant transfer pipes is a precision service key designed to engage and secure coolant transfer pipes in HSK 63 tool holders, offering a compact 136 mm overall length suited to maintenance and workshop servicing. Compatible with HSK 63 tool holders Designed for coolant transfer pipes Overall length 136 mm for accessible reach Reduced downtime through precise engagement A correctly matched engagement tool minimises the risk of misalignment and wear when handling coolant lines in tool holders. The HSK 63 interface ensures a consistent contact geometry, which reduces slippage and the chance of damaging the transfer connection. By using a dedicated service key, maintenance operations become more predictable and repeatable, so machining cycles return to normal faster and costly interruptions are less frequent. This benefit is especially relevant in production environments that demand tight tolerances and steady coolant delivery. Better access and ergonomics for routine servicing With an overall length of 136 mm, the service key provides enough reach to work comfortably within the recesses of HSK tool holders while remaining compact for quick tool changes. The length balances accessibility and control, allowing technicians to manipulate coolant transfer pipes with minimal repositioning. Improved handling reduces task time and physical strain during repetitive servicing procedures, supporting efficient workshop workflows and safer operation around spindle areas. Seamless integration into maintenance workflows The tool is specified for the engagement of coolant transfer pipes and fits the HSK 63 standard, enabling straightforward incorporation into existing tool sets. Packaged as a single unit, it complements other HSK service items and helps standardise the maintenance kit for machines using this interface. Standardisation lowers training effort and streamlines spare-part management, contributing to a leaner inventory and fewer procurement steps across the workshop. For procurement teams requiring precise HSK 63 engagement and reliable handling of coolant transfer pipes, contact Metav Werkzeuge for supply and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832716NW Product type: Key Manufacturer: TECWERK SKU: 4000832716NW Facts Overall length: 136 mm Key size: HSK 63 Packaging unit: 1 Special features For coolant transfer pipes Suitable for HSK 63 tool holders Service key for maintenance applications FAQ Is the key compatible with standard HSK 63 tool holders? The key is specified for HSK 63 connections and is compatible with standard HSK 63 tool holders; reference SKU 4000832716NW for ordering. What is the working length and why does it matter? The overall length is 136 mm, which provides access into the tool-holder recess while keeping handling compact for routine servicing. Can this tool be used for coolant line replacement and adjustment? Yes, the service key is designed to engage coolant transfer pipes for secure handling during replacement or adjustment operations. How is the item supplied for inventory management? The tool is supplied as a single unit (packaging unit 1), making it easy to add to maintenance kits and spares lists. Who manufactures the key and where can further product details be found? The product is offered under the brand TECWERK; use article number 4000832716NW for precise identification and procurement. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
138mm 90° Head For R-Type Drill Shank, Max 2000 r.p.m., Fits 85.725–86mm Bore - Vertex
A compact 90° right-angle head that pairs a 138 mm body diameter with up to 2,000 rpm for dependable angled machining and reduced cycle times. Its sturdy 12.5 kg construction provides stable cutting conditions and consistent surface quality. Order the VRA-R8 directly via Metav Werkzeuge or ask our consultants if needed. VRA-R8 90° right-angle head — Max 2,000 rpm, 138 mm body VRA-R8 is a right-angle milling head designed for precision angled machining on milling centres and machining stations, offering a compact footprint and reliable performance for workshop and industrial applications 90° right-angle head for angled machining Max 2,000 rpm operational speed 138 mm body diameter for robust support Sturdy 12.5 kg construction for stability Consistent performance for angled operations The 90-degree configuration delivers reliable, repeatable results when the tool axis must be reoriented. With a rated maximum speed of 2,000 rpm, the head maintains stable rotational behaviour under typical finishing and roughing feeds. The relatively large 138 mm body diameter increases bearing spacing, reducing deflection and helping to preserve tool geometry during side loads. That translates into fewer reworks and better dimensional adherence on angled faces. Heavy-duty build that minimises vibration A mass of 12.5 kg and a compact, rigid housing combine to dampen vibration and improve surface finish during aggressive cuts. The robust construction supports consistent concentricity and reduces chattering, which in turn extends cutting-edge life and lowers tooling costs over time. The design concentrates mass close to the mount, keeping inertia where it benefits machining stability without compromising accessibility at the workpiece. Integration and compatibility with Type R drill heads The head is compatible with a Type R drill head diameter range of 85.725–86 mm, enabling straightforward integration with existing spindle interfaces of the same family. The connection geometry and maximum speed rating should be checked against the host machine’s spindle specification; where matched, the attachment functions as an efficient means to add angled machining capability without major machine modifications. Clear geometric compatibility shortens retrofit time and reduces setup complexity. Logistics, supply certainty and workshop benefits Availability is supported by fast dispatch from stock, reducing downtime compared with long-lead custom units. For shops seeking to add angled operations without complicating production flow, this right-angle head provides a pragmatic balance between performance and ease of supply. Combined with routine maintenance, the unit supports predictable throughput and helps maintain delivery reliability in production schedules. Contact Metav Werkzeuge in Emmerich for technical compatibility checks and to reserve a Vertex VRA-R8 90° right-angle head; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VRA-R8 GTIN: 4061905084720 EClass: 21019290 Facts Body diameter: 138 mm Maximum speed: 2,000 rpm Weight: 12.5 kg Drill head (Type R) diameter: 85.725–86 mm Special features 90° orientation for angled machining Compatible with Type R drill head Ø 85.725–86 mm Fast dispatch from stock Brand: Vertex FAQ What spindle speed is recommended for this right-angle head? The VRA-R8 is rated to a maximum of 2,000 rpm; adherence to this limit ensures bearing life and consistent performance under normal cutting conditions. Is the VRA-R8 suitable for heavy side-loading operations? The 12.5 kg mass and 138 mm body diameter give the unit improved damping and reduced deflection, making it suitable for moderate side loads typical of angled milling and finishing. Which drill head sizes are compatible with the attachment? Compatibility is provided for Type R drill heads with a diameter of 85.725–86 mm, permitting direct integration where the host machine accepts that interface. How does the head contribute to tool life and surface quality? Stable bearing spacing and rigid housing minimise vibration and runout, which helps to extend cutting tool life and produce a more consistent surface finish on angled faces. Can this head be used across different machining centres? Where the spindle or mounting interface matches the Type R dimension range and the machine can operate within the head’s maximum speed, the VRA-R8 is suitable for retrofit on compatible milling centres. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
138mm Vertical Clamp With Massive Holding Arm, 750N Press Force, 1000N Hold Force - Kukamet
Take advantage of a compact clamping solution that combines a robust holding arm, precise holding force and straightforward mounting for reliable fixture work. The combination of a blackened finish, a 138 mm arm and measurable clamping values supports consistent set-up and long service life—order directly via Metav Werkzeuge or contact the consultancy team for application advice. Vertikalspanner 213 vertical clamp by Kukamet — robust holding arm and angle-foot mounting Vertikalspanner 213 is a vertical clamp engineered for fixture and jig applications in production and assembly environments, providing repeatable clamping with a compact footprint. Robust 138 mm holding arm Holding force 1,000 N capacity Clamping force 750 N performance Angle-foot mounting for secure installation Faster, more reliable fixture setup with measurable clamping performance The clamp delivers a tangible improvement in fixture reliability through its holding force 1,000 N and clamping force 750 N, values that translate directly into secure workpiece retention during machining and assembly. The measured forces allow planners to match clamping capacity with process requirements, reducing setup iterations and downtime. The device’s compact dimensions and 138 mm arm length make it particularly suited to confined fixture layouts where predictable force application is essential. Durable construction and finish for long service intervals Constructed with a blackened finish, the unit resists corrosion and surface wear while maintaining a professional appearance on the production bench. The massive holding arm provides mechanical stiffness that minimises deformation under load, preserving positional accuracy across repeated cycles. For technicians and production engineers, this means fewer adjustments, consistent part quality and a longer service life for fixture components. Integration and practical mounting for workshop efficiency Equipped with an angle-foot mounting, the clamp installs securely on plates and tooling blocks, enabling straightforward retrofitting into existing jigs. The compact form factor and clear technical data support planning and procurement: the clamp can be specified with confidence for small-batch production or series manufacture alike. Backed by a recognised manufacturer, the unit supports efficient workflow design and reliable clamping across varied applications. Discuss Kukamet’s 213 vertical clamp with Metav Werkzeuge to assess fit for specific fixtures—Metav Werkzeuge offers technical guidance and reliable supply from Emmerich Technical data Article number: B213-1-D-C3 GTIN: 8682843522424 Manufacturer: Kukamet Facts Arm length: 138 mm Holding force: 1,000 N Clamping (pressing) force: 750 N Weight: 0.196 kg eClass: 21041717 ETIM: EC011973 Special features Material: blackened finish Mounting: angle foot Massive holding arm Type: vertical clamp SKU: B213-1-D-C3 FAQ What clamping forces does this vertical clamp provide? The vertical clamp provides a holding force of 1,000 N and a clamping force of 750 N, values specified for the Kukamet 213 vertical clamp and useful for matching to workpiece requirements. Is the clamp suitable for fixture use in confined spaces? Yes, the compact design and 138 mm arm length make the device suitable for tight fixture layouts while maintaining reliable force transmission. What surface protection does the clamp feature? The clamp is finished with a blackened surface, offering increased resistance to corrosion and wear in workshop environments. Who supplies and supports this clamp in Europe? The Kukamet 213 vertical clamp is supplied via Metav Werkzeuge, which provides distribution and technical consultancy from Emmerich. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
138mm Vertical Clamp With Massive Holding Arm, 750N Thrust / 1000N Hold - Kukamet
The combination of a galvanised finish, a massive holding arm and a compact 138 mm reach ensures reliable, long-lasting clamping and secure positioning in small fixtures; benefit from robust holding force and straightforward integration via an angle foot mounting—order or request advice through Metav Werkzeuge for fast delivery and expert guidance. Vertikalspanner 213 – Vertical clamp with galvanised finish and 1,000 N holding force Vertikalspanner 213 is a compact vertical clamp intended for precision workholding and fixture applications in workshops and light production environments Galvanised steel construction Massive holding arm design 138 mm arm length for versatile reach Holding force up to 1,000 N Dependable clamping performance for routine production The vertical clamp performs as a dependable fixture element where reproducible clamping is required. With a holding force of 1,000 N and a maximum clamping force of 750 N, the device secures workpieces reliably during machining, assembly or inspection operations. The compact 138 mm arm provides a useful reach without excessive bulk, making the clamp suitable for confined setups and jigs. Technical values are geared to repeatable results, supporting shorter setup times and improved process stability. Built for stability and corrosion resistance A galvanised surface treatment protects the clamp against corrosion in standard workshop environments, extending service life and reducing maintenance intervals. The massive holding arm design increases rigidity at the clamping point, lowering the risk of vibration and micro-movement under load. The clamp is supplied with an angle foot mounting for straightforward attachment to fixture plates or tooling blocks, enabling a stable connection and reliable force transmission during cyclical use. Quick integration into existing fixtures and modular systems Integration into modular fixturing is simplified by the clamp’s compact footprint and standardised mounting style. Lightweight construction at approximately 0.196 kg facilitates handling and positioning when assembling multi-point clamping arrangements or retrofitting existing jigs. The combination of compact size and significant clamping capability supports versatile use across inspection benches, light milling fixtures and general workshop fixturing, improving throughput without adding complexity to the setup process. Contact Metav Werkzeuge for a tailored quotation and specification advice on the Kukamet Vertikalspanner 213 to ensure optimal integration in the production workflow Technical Data Article number: 213-1-D-C3 GTIN: 8680731505863 Brand: Kukamet Facts Arm length: 138 mm Weight: 0.196 kg Holding force max: 1,000 N Clamping force max: 750 N eCl@ss: 21041717 ETIM: EC011973 Special features Material: galvanised steel Mounting: angle foot Massive holding arm Category: Clamps SKU: 213-1-D-C3 FAQ Is the clamp suitable for fixture use in small production runs? The Kukamet Vertikalspanner 213 is designed for fixture and workholding tasks in workshops and small production, offering repeatable fixation with up to 1,000 N holding force. How is the clamp mounted to a fixture plate? Mounting is performed via the supplied angle foot; the vertical clamp provides a compact interface for secure attachment to plates or tooling blocks. What material and surface protection does the clamp have? The device is made from steel with a galvanised finish, providing corrosion resistance appropriate for standard workshop conditions. What reach can be expected from the clamp arm? The arm length is 138 mm, providing a compact reach that is suitable for tight jig spaces while still allowing reliable engagement with the workpiece. Where can the technical drawing or catalogue information be found? A catalogue page and product documentation are available for the Vertikalspanner 213, showing dimensions and mounting details for planning and integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
139mm Morse Taper MT3 Collet Arbor Hardened And Ground With B18 Shank, DIN 238 - TECWERK
Benefit from a hardened, ground MT3–B18 taper arbor that complies with DIN 238 and measures 139 mm overall — combining a secure chuck fit with durable construction for consistent machining results; order directly via Metav Werkzeuge or consult our specialists for application advice. MT3–B18 taper arbor — hardened and ground with DIN 238 drill‑chuck taper (TECWERK) The MT3–B18 taper arbor is a hardened, ground arbor designed to accept drill chucks on drilling and turning machines, offering a precision interface for reliable toolholding. DIN 238 drill-chuck taper Hardened and ground finish MT3 shank with B18 reception Secure, low‑runout mounting for accurate machining The design provides a Morse taper (MT3) interface mated to a B18 reception, giving a rigid and concentric connection between machine spindle and chuck. A correctly fitted taper arbor reduces runout and vibration, which directly improves hole quality and tool life. For users unfamiliar with the term, runout describes the deviation of the rotating axis from true centre; minimising it prevents uneven wear and poor surface finish. The hardened, ground surfaces ensure a repeatable, tight fit that aids in maintaining precision across repeated mounting cycles. Broad compatibility with standard drill chucks and machines Compliance with DIN 238 means the taper conforms to the recognised drill‑chuck standard, simplifying selection and ensuring compatibility with commonly used chucks. The arbor’s MT3 shank is suitable for machines accepting Morse taper shanks and, via the B18 reception, accepts Jacobs‑style drill chucks for a secure union. This combination offers practical flexibility in workshops that use both drill presses and toolroom lathes, enabling straightforward interchange of chucks without modification. The clear standardisation reduces downtime and supports predictable tool setup. Built to last: hardened and ground for dependable workshop use Manufactured with a focus on durability, the arbor is hardened and ground to resist wear and maintain concentricity over time. This robust construction reduces the need for frequent replacement and supports steady production schedules. In routine use, simple cleaning and correct withdrawal methods will preserve the taper condition; light lubrication of the contact faces during storage avoids corrosion without impairing the fit. The result is a component that contributes to lower maintenance needs and dependable everyday performance on the shopfloor. Contact Metav Werkzeuge today for tailored technical advice or to request a quotation; reliable supply direct from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832338NW Manufacturer: TECWERK Product type: Taper arbor Label: Kegeldorn MK3xB18 geh.u.geschl.Gesamt-L.139mm TECWERK Facts Total length: 139 mm Shank taper: MT3 Reception: B18 Standard: DIN 238 Packaging unit: 1 Special features With drill‑chuck taper DIN 238 Ganz gehärtet und geschliffen (hardened and ground) For acceptance of drill chucks on drilling and turning machines Execution: hardened and ground FAQ Which machines are suitable for this taper arbor? The MT3–B18 taper arbor by TECWERK is intended for drilling machines and lathes that accept a MT3 shank; its B18 reception takes standard drill chucks. Does the arbor comply with any standards? Yes — the arbor features a drill‑chuck taper according to DIN 238, ensuring compatibility with chucks manufactured to that standard. How does the arbor affect machining accuracy? Using this hardened and ground arbor reduces runout and vibration, which improves hole quality and extends drill bit life compared with less precise toolholding options. Is specialised maintenance required? Routine cleaning and light protection against corrosion are sufficient; the hardened and ground finish is designed for longevity under normal workshop conditions. What is the article number for ordering or reference? The article number (SKU) is 2000832338NW for the TECWERK MT3–B18 taper arbor. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
13mm 5C Collet, 0.02mm Runout Accuracy, 87mm Length - Vertex
Take advantage of the combination of high clamping accuracy (0.02 mm), a 13 mm bore for standard shank sizes and a compact 87 mm overall length to ensure reliable holding in precision machining. Order the 5C-13 collet directly via Metav Werkzeuge or consult the Metav team for tailored technical guidance. 5C-13 5C Collet — 13 mm bore, 87 mm length (Vertex) The 5C-13 is a 5C collet designed for secure clamping of 13 mm cylindrical shanks in general workshop turning and milling operations Precision runout tolerance 0.02 mm 13 mm bore for standard shank sizes 87 mm overall length for deeper clamping Lightweight 0.21 kg for easy handling Consistent precision for repeatable machining quality The collet delivers repeatable clamping via a close runout tolerance of 0.02 mm, which reduces vibration and improves surface finish on turned and milled components. A small runout specification means tools and workpieces are held concentrically, translating into fewer rejects and less rework. The 13 mm bore matches common shank diameters used in toolholding and workpiece fixtures, enabling straightforward integration into existing tooling setups. This combination of dimensional control and standard sizing supports efficient production cycles where accuracy matters. Practical compatibility and application benefits Built to the 5C standard, this clamping solution fits established 5C tooling systems and supports everyday workshop demands. The 87 mm overall length allows for deeper engagement where extended reach is required without sacrificing grip stability, helping to secure longer workpieces or tooling extensions. Lightweight construction at 0.21 kg simplifies handling during changeover and reduces operator fatigue over repeated swaps. Where quick, reliable clamping is required, this collet provides a pragmatic balance between accessibility and machining performance. Robust handling, serviceability and supply assurance Maintenance is straightforward: keep the collet and mating surfaces clean and lubricated to preserve clamping accuracy and lifetime performance. The product benefits from Vertex manufacturing standards and is supplied through Metav Werkzeuge, whose European fulfilment in Emmerich functions as a quality filter for the market. This distribution approach ensures consistent availability and reliable delivery, backed by Metav’s decades of experience in precision tools and workshop equipment. Contact Metav Werkzeuge in Emmerich for tailored advice on Vertex 5C-13 collets — email info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarification and procurement Technical data SKU: 5C-13 GTIN: 4061905088452 Brand: Vertex Core specifications Diameter: 13 mm Length: 87 mm Weight: 0.21 kg Runout accuracy: 0.02 mm ECLASS: 21041712 Special features System: 5C Type: collet Manufacturer: Vertex FAQ What shank diameter does this collet accept? The 5C-13 collet accepts a 13 mm shank and is intended for standard cylindrical tool or workpiece shanks. How accurate is the clamping runout? The Vertex 5C-13 offers a runout accuracy of 0.02 mm, supporting precise concentricity for machining tasks. Is the 5C-13 compatible with existing 5C toolholders? Yes, the collet conforms to the 5C system and is compatible with standard 5C chucks and holders. What is the overall length and how does it affect use? The overall length is 87 mm, which provides deeper clamping engagement for extended shanks while maintaining stability. Who supplies this collet in Europe? Metav Werkzeuge distributes the Vertex 5C-13 collet and provides technical advice and fulfilment via its Emmerich site. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
13mm Ball Washer DIN 6319C For M12 Screws, Bore 13mm - AMF
Take advantage of the combination of DIN 6319C conformity, a precise Ø13 mm bore and compact height for consistent seating and reliable assemblies; order directly via Metav Werkzeuge or consult our technical team for specification support. Spherical washer DIN 6319C for M12 — AMF, bore Ø13 mm The Spherical washer DIN 6319C is a precision seating washer designed to compensate angular misalignment and ensure uniform load transfer beneath M12 fastenings in mechanical and structural assemblies DIN 6319C standardised seating washer For M12 fastenings with Ø13 mm bore Compact height H2 4.6 mm for tight spaces Spherical seating radius R 17 for self-alignment Secure seating and consistent load transfer The spherical washer manufactured to DIN 6319C provides a reliable bearing surface that compensates for angular errors between bolt head and component face. By matching the seating geometry to the mating surface, the washer improves load distribution across the joint and reduces peak stresses that can cause loosening or uneven clamping. For assemblies using M12 bolts, the specified Ø13 mm bore ensures correct running clearance while the spherical form promotes repeatable torque behaviour and safer mechanical connections. Engineered dimensions for predictable assembly performance Key measures such as D1 Ø13 mm, D3 24 mm, H2 4.6 mm and R 17 mm define the seating profile and overall fit. The bore diameter (D1) is selected to suit standard M12 shank tolerances; the outer diameter (D3) and spherical radius (R) determine contact area and tilting capacity. These dimensions translate directly into practical benefits: precise centring, consistent clamping force and reduced need for rework. Technical teams unfamiliar with seating washers will find that adherence to standard dimensions simplifies parts sourcing and ensures interchangeability across suppliers. Practical workshop advantages and supply reliability Delivered in single-unit packaging for controlled assembly usage, this seating disc supports quality-conscious production and maintenance workflows. The design reduces rework time and supports predictable assembly tolerances, which is particularly valuable for repeat production runs or retrofit work. For procurement and stocking, Metav Werkzeuge’s distribution from Emmerich acts as a quality filter for the European market, helping maintain steady supply and technical guidance for fitment and selection. For technical clarification or to source AMF spherical washers with DIN 6319C conformity via Metav Werkzeuge, contact our specialists in Emmerich for immediate assistance and order placement Technical data SKU: 4000833458NW Label: Kugelscheibe DIN 6319C for screws M12, bore Ø13 mm Manufacturer: AMF Product type: Spherical washer Suitable for: M12 Packaging unit: 1 UID: 4000833458NW Dimensions / Key measures D1: 13 mm (bore Ø) D3: 24 mm (outer Ø) H2: 4.6 mm (height) R: 17 mm (spherical radius) Standard: DIN 6319C Features / Applications Standardised seating element for angular compensation Designed for steel assemblies and machine construction Single-piece seating washer for consistent clamping Compact form factor for limited installation space FAQ Is this washer suitable for M12 bolts? The spherical washer is specified for use with M12 fastenings; the Ø13 mm bore provides the correct clearance for standard M12 shanks. Which standard does the seating washer comply with? The washer conforms to DIN 6319C, ensuring interchangeability and standardised seating geometry. What are the key dimensions that affect fit and function? Critical measures are D1 Ø13 mm, D3 24 mm, H2 4.6 mm and R 17 mm, which together define bore fitment, contact area and angular compensation. Can the washer compensate for uneven contact surfaces? Yes, the spherical seating radius allows the washer to correct minor misalignments between the bolt head and the mating surface, improving load distribution. How is the product supplied and identified? This item is supplied in a packaging unit of 1 and is listed under SKU 4000833458NW for ordering and inventory. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Clamping Wedge For T-Slot 12+14mm, Clamping Height 0-35mm - AMF
Take advantage of precise T‑slot compatibility and adjustable clamping height to standardise fixture setups and reduce changeover time; order the Clamping prong No. 6313K directly via Metav Werkzeuge or consult our specialists for integration advice. Clamping prong No. 6313K — compact clamping element for T‑slot fixtures The Clamping prong No. 6313K is a purpose‑built clamping element for machine tables with 12 mm and 14 mm T‑slots, engineered to deliver repeatable clamping at low profile heights. T‑slot compatible 12 + 14 mm Adjustable clamping height 0–35 mm Width 13 mm for narrow fixtures Suitable for M12 clamping bolts Faster, more repeatable setups with T‑slot compatibility The design offers direct compatibility with standard T‑slot 12 + 14 mm machine tables, which simplifies fixture planning and reduces the need for adapters. By matching the slot geometry, the clamping element provides consistent repeatability and reduces lateral play during clamping cycles. The compact footprint supports denser fixturing layouts without compromising access to the workpiece, so set‑up times are shortened and throughput is improved in repetitive production tasks. Secure clamping across a practical height range With an adjustable clamping height of 0–35 mm (H1), this clamping prong adapts to different workpiece thicknesses while maintaining a low profile. The additional dimension references (H2: 30–55 mm, B2: 38) indicate compatibility with common fixture stacks and spacer arrangements used in professional clamping systems. The part is engineered for use with M12 clamping bolts, ensuring secure axial force transmission and straightforward integration into existing clamps and tensioning elements. Robust, space‑saving form for workshop efficiency Constructed to operate reliably in demanding shop environments, the clamping element’s 13 mm width and overall compact length of 88 mm permit installation where space is limited. The narrow section and defined contact faces reduce interference with tool paths and fixturing accessories. Supplied as individual units (packaging unit 1), the component suits both one‑off jigs and serial fixture builds, enabling modular expansion of clamping systems without extensive redesign. Practical integration and application notes The clamp prong is a dedicated clamping aid for curvature‑free, mechanical clamping in metalworking and general workshop applications. It mates with standard clamping hardware; no special fasteners are required beyond the specified M12 bolts. For multi‑station fixtures, the compact design supports closer spacing of clamps, increasing usable table area and enhancing workpiece stability during machining operations. For tailored advice on integrating the AMF clamping prong into existing fixtures or to order delivery from Metav Werkzeuge, contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge provides expert support and reliable supply from Emmerich to your workshop Technical Data Article number: 4000603000NW Type: Nr. 6313K Product: Clamping prong Brand: AMF Dimensions & measurable data Width: 13 mm Overall length: 88 mm T‑slot compatibility: 12 + 14 mm Clamping height H1: 0–35 mm Additional dimension H2: 30–55 mm B2 value: 38 Suitable for: M12 Packaging unit: 1 UID: 4000603000NW Materials & features Product type: clamping element for T‑slot fixtures Supply format: single unit Intended use: mechanical clamping in workshop fixtures FAQ What T‑slot sizes does this clamping prong fit? The clamping prong is compatible with 12 mm and 14 mm T‑slots, designed to match standard table profiles for secure seating and repeatable positioning. Which clamping height range is usable with this item? The primary clamping height range is 0–35 mm (H1); further dimension references (H2: 30–55 mm, B2: 38) describe additional stack options for fixture assemblies. Which bolt size is recommended for fastening? The component is designed for use with M12 clamping bolts to provide correct axial force and integration with common clamping hardware. Is the prong suitable for dense fixture layouts? Yes, with a 13 mm width and 88 mm overall length, the element is suitable for compact fixturing where space conservation is critical. Can the prong be used in serial production fixtures? Supplied as single units, the prong is intended for modular use and can be deployed in both single‑jig and serial fixture environments to improve process stability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Flat Magnetic Gripper With Threaded Bush 10N Holding Force, Up To 200 °C - TECWERK
Compact, space-saving holding with a 13 mm diameter, M3 threaded bush and a 10 N holding force ensures dependable positioning in small fixtures; the low-profile 11.5 mm height supports tight assemblies while recommended temperatures up to 100 °C (max 200 °C) expand use cases. Order directly via Metav Werkzeuge or consult their specialists for integration advice. TECWERK Magnetic Flat Gripper D.13×H11.5mm — M3 Thread, 10 N Holding Force The magnetic flat gripper D.13×H11.5mm is a compact flat magnetic holder engineered for light-duty holding and precise positioning in assembly, fixture and small-part handling applications Compact 13 mm diameter Secure M3 threaded bush mounting Max holding force 10 N Temperature resistant up to 200 °C Space-saving holding that simplifies fixtures and jigs A low-profile design delivers efficient fixation in constrained assemblies: the 13 mm diameter and 11.5 mm height reduce interference in tight setups, while the holding force 10 N secures small components without bulky hardware. The combination of compact dimensions and measurable holding performance allows engineers to replace more complex clamping parts with a simple magnetic solution, reducing setup time and simplifying repetitive positioning tasks. This results in faster cycle times and fewer handling operations in production environments. Robust magnetic material and reliable threaded mounting Manufactured from hard ferrite, the magnet offers stable magnetic properties suited to frequent, light-duty use. The integrated M3 thread in the threaded bush enables direct, repeatable attachment to plates, brackets or small fixtures, ensuring secure mounting and straightforward integration into existing tooling. The component is recommended up to 100 °C and remains temperature resistant up to 200 °C for temporary excursions, making the unit adaptable to processes with moderate heat exposure while preserving holding performance over time. Practical applications and operational advantages Ideal for assembly, positioning of small parts, light automation end-effectors and jig construction, this flat magnetic holder reduces mechanical complexity while improving handling consistency. The simple geometry facilitates quick replacement and minimal maintenance, delivering a pragmatic way to enhance throughput without redesigning fixtures. For technical clarity and integration planning, assistance is available for selecting the correct specification and mounting approach to match specific production requirements. For tailored recommendations and local supply of TECWERK magnetic flat grippers, contact Metav Werkzeuge for professional guidance and parts provision from Emmerich. Technical data Article number: 4000832241NW Manufacturer: TECWERK Product: Magnetic flat gripper Version: with threaded bush Material: hard ferrite Facts Diameter: 13 mm Height: 11.5 mm Thread: M3 Holding force: 10 N Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C Special features With threaded bush Hard ferrite magnet Light-duty holding and positioning Packaging unit: 10 Label: Magnetflachgreifer D.13xH11,5mm m.Gewindebuchse Haftkraft 10N FAQ What material is used for the magnet? The TECWERK magnetic flat gripper is made from hard ferrite, a stable ceramic magnet material suited to light-duty holding applications. What holding force can be expected from this gripper? The magnetic flat gripper provides a holding force of 10 N, sufficient for securing small components in positioning and fixture tasks. How is the gripper mounted? Mounting is via the integrated M3 threaded bush; the M3 thread allows secure attachment to brackets or fixture plates. Can the gripper be used at elevated temperatures? The flat magnetic gripper is recommended for continuous use up to 100 °C, with a maximum short-term resistance up to 200 °C. Which applications suit this magnetic holder best? Typical uses include assembly stations, small-part fixturing, light automation end-effectors and any setup requiring compact, repeatable magnetic holding. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com