Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
1500 N Closure Clamp Horizontal Base With Hook, Stainless Steel, 45mm Thread Length - Kukamet
Take advantage of the combination of robust stainless steel construction, a horizontal-foot mounting for secure installation, and high clamping and holding capacities to ensure reliable fixture performance in production or workshop settings. Order directly via Metav Werkzeuge or consult our specialists for selection advice. Toggle latch clamp 331 — stainless steel latch with hook for horizontal mounting A Toggle latch clamp 331 engineered for secure fastening where quick engagement and compact horizontal installation are required in jigs, enclosures and closures Stainless steel construction for corrosion resistance Horizontal-foot design for flush mounting Hook latch for quick and secure engagement 1,500 N clamping force; 2,000 N holding capacity Consistent clamping force for secure processes The clamp delivers a defined 1,500 N clamping force and a 2,000 N holding capacity, giving repeatable retention for fixtures and closures. These measurable values mean less variation during assembly or transport, which supports process reliability and reduces rework. The mechanism is optimised for quick engagement via the integrated hook, allowing fast operation in repetitive tasks and contributing to shorter cycle times on production lines. Corrosion resistance and longevity in demanding environments Constructed from stainless steel, the design resists corrosion and maintains mechanical integrity in humid or exposed environments. The material choice minimises maintenance intervals and lowers the risk of surface degradation affecting clamp performance. For workshops or production areas where cleanliness and durability are priorities, the robust build translates into predictable lifetime behaviour and consistent clamping characteristics. Space-saving horizontal mount and straightforward installation The horizontal-foot mounting enables a flush installation that preserves valuable bench or panel space and facilitates integration into existing fixtures. The compact footprint and a 45 mm thread length simplify alignment and allow secure attachment with standard fasteners. Mounting horizontally also reduces protrusion, which is beneficial where clearance is limited or where a neat, low-profile solution is required. Practical applications and material compatibility Suitable for use in fixtures, transport boxes, equipment doors and assembly jigs, this latch is especially useful where rapid closure is needed alongside secure retention. The combination of hook engagement and stainless-steel construction makes it appropriate for manufacturing, laboratory environments and maintenance lockers. The measured clamping and holding forces provide clarity when matching the latch to panel materials and expected loads. Contact Metav Werkzeuge for application advice and specification matching to ensure the toggle latch clamp 331 meets the required clamping and holding criteria for the intended use Technical Data Article number: S331-2 GTIN: 8680731509472 SKU: S331-2 Facts Clamping force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Weight: 0.16 kg Special features Material: Stainless steel Mounting: Horizontal foot Hook: Yes eClass: 21041718 ETIM: EC011973 Category: Spanner / Toggle clamps Manufacturer: Kukamet FAQ What clamping capacity does this latch provide? The toggle latch clamp 331 offers a clamping force of 1,500 N and a holding capacity of 2,000 N, suitable for reliable retention in many fixture and enclosure applications. Is the latch suitable for outdoor or corrosive environments? Yes. The stainless steel construction of the Kukamet latch provides enhanced corrosion resistance, reducing maintenance and extending service life in damp or exposed conditions. How is the latch mounted and what clearance is needed? The clamp is designed for horizontal-foot mounting and requires standard fasteners engaging the 45 mm thread length; its low-profile layout reduces protrusion and conserves installation space. Does the latch include a hook mechanism for quick engagement? The model features an integrated hook latch for fast and secure engagement, making it appropriate for repeated opening and closing cycles. Which applications are recommended for this type of clamp? Typical uses include jigs and fixtures, equipment doors, transport boxes and assembly stations where compact, repeatable clamping and quick engagement are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Closure Clamp Vertical Base With Hook, 45mm Thread Length, Stainless Steel - Kukamet
Take advantage of robust clamping performance, corrosion‑resistant stainless‑steel construction and a compact vertical‑mount design to secure light‑duty fixtures reliably. Order or request consultancy via Metav Werkzeuge for specification checks and application advice. Toggle latch clamp 332 — Kukamet stainless‑steel vertical‑mount latch with hook The Toggle latch clamp 332 is a compact stainless‑steel closure designed for vertical mounting on panels and fixtures, delivering a reliable holding solution for light industrial and workshop applications. Stainless steel construction Vertical‑mount foot for panel fitting Hook‑type latch included Holding force up to 2,000 N Consistent clamping performance that keeps assemblies secure The clamp provides a clear performance advantage through a holding force of 2,000 N and a closing force of 1,500 N, values that translate directly into secure closures under dynamic load. These figures describe the maximum retention and actuation effort respectively: the holding force is the static retention capacity when engaged, while the closing force indicates the manual or actuator effort required to bring the latch into position. Such measurable data supports predictable behaviour in repetitive production and assembly tasks, improving process reliability and reducing rework. Long‑lasting stainless‑steel build for corrosive environments Constructed from stainless steel, the unit resists corrosion and maintains dimensional stability where moisture or mild chemicals are present, prolonging service life compared with plated alternatives. The compact mass of 0.16 kg keeps added weight minimal on movable panels. The integrated hook provides positive engagement for over‑centre latching, ensuring a firm connection that resists vibration and accidental release — a practical choice for small enclosures, access panels and jigs. Space‑saving vertical mounting that simplifies installation The vertical‑mount foot allows the latch to be fitted on narrow edges or tight panels where horizontal options would not fit. A 45 mm thread length is provided for secure anchoring through standard panel thicknesses; this dimension aids correct fastener selection and ensures consistent clamp alignment. The overall compact footprint supports close‑packed arrangements on fixture plates, making the component suitable for assembly lines and compact workstations where space optimisation matters. Easy integration, low maintenance, high repeatability The lever‑style toggle design yields fast operation and straightforward mechanical behaviour, minimising set‑up time and maintenance requirements. The Kukamet toggle latch clamp 332 (SKU S332-2) fits common clamping workflows in the clamping technology segment and requires only occasional inspection for wear and lubrication. Its simple mechanics mean fewer points of failure and consistent cycle life when used within the specified load limits, supporting efficient production throughput. For tailored advice on integrating the Kukamet latch into fixtures or to confirm suitability for a specific application, contact Metav Werkzeuge in Emmerich by phone at +49 2822 7131930 or email info@metav-werkzeuge.com to discuss technical details and ordering. Technical Data Article number: S332-2 GTIN: 8680731509502 eClass: 21041718 ETIM: EC011973 Facts Holding force: 2,000 N Closing force: 1,500 N Thread length: 45 mm Weight: 0.16 kg Special features Material: Stainless steel Mounting: Vertical foot Hook: Yes Design: Lever / toggle clamp Category: Spanner (clamping technology) Brand: Kukamet FAQ What maximum holding and closing forces does the clamp provide? The Kukamet toggle latch clamp 332 (SKU S332-2) specifies a maximum holding force of 2,000 N and a closing force of 1,500 N, which guides selection for retention and actuation requirements. Is the latch suitable for corrosive or damp environments? Yes; the latch is made from stainless steel, offering enhanced corrosion resistance for workshop and light industrial settings where moisture or cleaning agents may be present. How is the clamp mounted and what fixing length is required? The component uses a vertical‑mount foot and a 45 mm thread length for secure fastening, allowing installation on thin to medium‑thickness panels with standard fasteners. Does the product include a hook for positive engagement? Yes; the unit is supplied with a hook‑type latch for firm over‑centre engagement, improving resistance to vibration and accidental release. What applications are typical for this type of latch? This latch is intended for clamping technology applications such as access panels, enclosures, jigs and light‑duty fixtures where compact, repeatable fastening and easy manual operation are needed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Druckkraft, 12 mm Kolbendurchmesser, waagerechter Fuß, verzinkt mit Gusskörper, Haltekraft 3700 N - Kukamet
Der Pneumatische Schubstangenspanner kombiniert verzinkten Gusskörper, kompakte Bauform und 1500 N Schubkraft für zuverlässige Spannlösungen in der Werkstatt; die hohe Haltekraft von 3700 N sorgt für sichere Fixierung, der waagerechte Fuß erleichtert den Einbau. Bestellen Sie das Gerät direkt über Metav oder kontaktieren Sie unsere Beratung bei technischen Fragen. Pneumatischer Schubstangenspanner von Kukamet Der Pneumatische Schubstangenspanner ist ein pneumatisch betätigter Spannkörper für wiederholte Spannvorgänge in Fertigung und Montage und eignet sich insbesondere für robuste Werkstattanwendungen. Verzinkter Gusskörper für lange Lebensdauer Waagerechter Fuß für einfache Montage Druckkraft 1500 N für schnellen Vorschub Haltekraft 3700 N für sichere Fixierung Kompaktes Gewicht 1,37 kg für flexible Einbaustandorte Robuste Bauweise reduziert Wartungsaufwand und Ausfallzeiten Der verzinkte Gusskörper bietet effektiven Korrosionsschutz und mechanische Stabilität bei häufiger Beanspruchung. Durch die Oberflächenveredelung wird die Lebensdauer erhöht, somit sinken Wartungsaufwand und Stillstandszeiten. Anwender profitieren von geringeren Instandsetzungskosten und verlässlicher Wiederholgenauigkeit bei Serienprozessen. Präzise Kraftverteilung für sichere Spannvorgänge Mit einer Druckkraft von 1500 N und einer Haltekraft von 3700 N gewährleistet das Gerät kraftvolle Bewegung und zuverlässige Verriegelung der Spannposition. Der Kolbendurchmesser von 12 mm sorgt für direkte Kraftübertragung, wodurch wiederholte Spannzyklen kontrolliert und reproduzierbar ablaufen. Pneumatische Betätigung bedeutet zudem schnelle Reaktionszeiten und einfache Anbindung an vorhandene Druckluftinstallationen. Einbaufreundliche Konstruktion und vielseitige Einsetzbarkeit Die Befestigungsart mit waagerechtem Fuß vereinfacht die Montage auf Vorrichtungen und Spannvorrichtungen; das geringe Gewicht von 1,37 kg ermöglicht den Einsatz auch in beengten Einbausituationen. Das Gerät ist als Hebelspanner konzipiert und eignet sich für Werkstattautomation, Prüffelder und Fertigungsstraßen, wo kompakte, zuverlässige Spanntechnik gefragt ist. Bestellen Sie den Kukamet Pneumatischen Schubstangenspanner über Metav und sichern Sie sich robuste Spannkraft, schnelle Verfügbarkeit sowie kompetente Beratung per eMail (info@metav-werkzeuge.com) oder Telefon (+49 2822 7131930) Produktmerkmale Artikelnummer: 641-3-Q12 Marke: Kukamet Bezeichnung: Pneumatischer Schubstangenspanner, 641 Fakten Druckkraft (max): 1500 N Haltekraft (max): 3700 N Durchmesser Kolben: 12 mm Gewicht: 1,37 kg Besonderheiten Material: Verzinkt mit Gusskörper Befestigungsart: waagerechter Fuß Hebelspanner FAQ Für welche Anwendungen eignet sich der Spannkörper am besten? Der Pneumatische Schubstangenspanner von Kukamet eignet sich für wiederholte Spannvorgänge in Montage, Prüftechnik und Fertigung, SKU 641-3-Q12, und bietet durch seine robusten Eigenschaften hohe Prozesssicherheit. Welche Unterschiede bestehen zwischen Druckkraft und Haltekraft? Die Druckkraft beschreibt die Schubbewegung des Kolbens (bei diesem Modell 1500 N), die Haltekraft (3700 N) gibt an, wie stark die Fixierung im verriegelten Zustand wirkt; diese Werte gewährleisten beim Kukamet Pneumatischen Schubstangenspanner sichere Spannvorgänge. Wie wird der Spanner montiert und ausgerichtet? Die Montage erfolgt über den waagerechten Fuß; beim Kukamet Schubstangenspanner 641 empfiehlt sich eine feste Befestigung auf der Vorrichtung, um präzise Wiederholpositionen zu gewährleisten. Ist das Gerät für den Einsatz in feuchten Umgebungen geeignet? Der verzinkte Gusskörper bietet einen grundsätzlichen Korrosionsschutz, wodurch der Pneumatische Schubstangenspanner von Kukamet für normale Werkstattbedingungen gut geeignet ist; bei aggressiven Medien sind zusätzliche Schutzmaßnahmen zu prüfen.
1500 N Hold Force Vertical Foot Toggle Clamp With Hook, Stainless Steel 45mm Thread Length - Kukamet
Robust stainless-steel construction, vertical-foot mounting and a holding force of 1,500 N deliver secure and repeatable closures for jigs, fixtures and panel fastenings. The hook-equipped lever design with a pressing force of 1,000 N enables fast engagement and reliable retention. Order the S312-1 directly via Metav Werkzeuge or ask our consultants if specialised application advice is required. S312-1 Hook Latch Clamp by Kukamet — Stainless steel, vertical foot The S312-1 Hook Latch Clamp is a lever-operated latch designed to secure panels and fixtures in workshop and light industrial applications, fitted with a vertical-foot mounting for stable attachment Stainless-steel construction Vertical-foot mounting Holding force up to 1,500 N Hook-equipped lever latch Consistent clamping performance for reliable production The lever-operated latch delivers a compact and repeatable clamping action, optimised for fixtures where quick closure and secure retention matter. The device provides a holding force of 1,500 N while offering a pressing force of 1,000 N, values that describe the maximum retention and the applied clamping load respectively. The hook-equipped design converts lever travel into secure engagement, reducing bounce and slippage during cyclic operation. This results in fewer re-adjustments and a steadier production flow, which supports efficiency and process stability in small-batch and series production alike. Straightforward mounting and fast installation Mounting is achieved via a vertical foot that ensures a low-profile, stable attachment to plates or tooling bases, facilitating retrofit into existing jigs. The component includes a thread length of 45 mm, which allows adequate thread engagement for common mounting thicknesses and for the use of standard fasteners. Weighing just 0.135 kg, the unit is lightweight yet sturdy, simplifying handling during assembly and minimising additional load on moving fixtures. The simple geometric design of the foot and hook makes alignment easier and reduces set-up time at the workbench. Corrosion resistance and economical upkeep Made from stainless steel, the clamp resists corrosion in workshops and damp environments, lowering maintenance frequency and extending service life compared with untreated parts. The material choice also supports cleaning with common workshop agents without immediate surface degradation. The mechanical simplicity of the lever and hook mechanism means that wear parts are limited and inspection routines remain straightforward; periodic lubrication and a visual check of the hook engagement suffice for most applications. The combination of material and design thus reduces downtime and total cost of ownership over the device’s service life. Contact Metav Werkzeuge for tailored application advice or to request a quotation for the Kukamet S312-1 Hook Latch Clamp — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S312-1 GTIN: 8682843523315 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.135 kg Pressing force max: 1,000 N Holding force max: 1,500 N Thread length: 45 mm Special features Material: stainless steel Mounting: vertical foot Hook-equipped Category: Clamps FAQ What maximum holding and pressing forces does this clamp provide? The clamp offers a holding force of up to 1,500 N and a pressing force of up to 1,000 N, as stated for the S312-1 hook latch clamp. Can the clamp be mounted on existing fixture plates? Yes. The vertical-foot mounting is suitable for attachment to standard plates and tooling bases; the 45 mm thread length permits secure engagement with common fasteners. Is the clamp suitable for use in humid or corrosive workshop environments? The S312-1 is manufactured from stainless steel, which improves resistance to corrosion and supports use in workshops where occasional exposure to moisture occurs. How heavy is the clamp and does weight affect retrofitting? At approximately 0.135 kg, the clamp is lightweight, which simplifies handling and generally makes retrofitting into existing fixtures straightforward. What maintenance does the hook latch mechanism need? Maintenance is minimal: regular visual inspections, periodic lubrication of moving joints and checking hook engagement are usually sufficient to maintain reliable operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Horizontal Foot Toggle Clamp With Hook, 50mm Thread Length, Black Oxide - Kukamet
Take advantage of a compact toggle design combined with a holding force of 1,800 N and a blackened finish for reliable, low-maintenance clamping—order the locking clamp 411 directly via Metav Werkzeuge or request advice from their consultants. Locking clamp 411 — horizontal-base toggle clamp with hook (Kukamet) The Locking clamp 411 is a horizontal-base toggle clamp with integrated hook, designed for secure workholding in light-duty fixtures and jigs. Horizontal base mounting for stable installation Holding force up to 1,800 N Blackened finish for corrosion resistance Integrated hook and 50 mm thread length Consistent clamping performance for repetitive tasks The robust holding force of 1,800 N together with a clamping pressure of 1,500 N ensures steady fixation during repeated operations. These figures describe two different aspects of performance: the clamping/pressure value indicates the force applied at the contact point, while the holding force refers to the maximum load the latch withstands when closed. For production contexts that require repeatable positioning, the mechanical toggle action converts lever movement into a secure lock, reducing the risk of part movement and improving process reliability. Simple installation and flexible integration into jigs Fitted with a horizontal base and a 50 mm threaded rod, the clamp is ready for straightforward mounting to plates or fixtures. The horizontal foot allows the device to be fastened flush to a workbench or fixture plate, while the threaded length gives room for height adjustment and fine alignment. At 0.21 kg, the component is light enough for compact assemblies yet sturdy enough for secure engagement, making it suitable for small assembly stations and dedicated holding fixtures. Low-maintenance surface and long service life The blackened finish provides a protective layer that reduces visible wear and offers basic corrosion resistance in standard workshop environments. This surface treatment minimises the need for frequent upkeep and keeps functional parts moving smoothly under normal operating conditions. Combined with the simple mechanical design, the result is a maintenance-friendly clamping solution that contributes to predictable uptime in workshop settings. Compact lever design for quick latching and safe operation The lever-operated mechanism with an integrated hook enables fast closing and release cycles, which supports efficient workflows in repetitive assembly or testing operations. The toggle principle creates secure locking without continuous operator force, improving ergonomics and reducing handling time. For light to medium duty applications where space is limited and cycle speed matters, this compact latch offers a reliable balance of performance and usability. For procurement or technical clarification regarding the Kukamet locking clamp 411, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number / SKU: B411-2 GTIN: 8680731508604 Eclass: 21041718 ETIM: EC011973 Facts Weight: 0.21 kg Holding force: 1,800 N Clamping/pressure force: 1,500 N Thread length: 50 mm Special features Horizontal base mounting Blackened finish Integrated hook Toggle/lever locking mechanism Category: Clamping technology (toggle clamp) FAQ What is the maximum load the clamp tolerates? The clamp provides a holding force of 1,800 N, which is the maximum load the closed latch can safely resist under normal conditions. Can the clamp be mounted on flat fixture plates? Yes, the horizontal foot is intended for secure mounting on flat plates and bench tops; the 50 mm threaded rod enables height adjustment during installation. Is the surface finish suitable for workshop environments? The unit’s blackened finish offers basic protection against corrosion and wear, making it appropriate for standard workshop use with routine maintenance. Does the device include a hook for quick latching? Yes, the model is supplied with an integrated hook, allowing for fast engagement and release in assembly and jigs. Is this clamp appropriate for heavy industrial machining? The latch is designed for light to medium duty workholding; for heavy machining applications, devices with higher load ratings should be selected. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Horizontal Foot Toggle Clamp With Hook, Stainless Steel, 50mm Thread Length - Kukamet
Take advantage of stainless steel durability, a horizontal-foot design and a compact, hook-equipped form to secure fixtures reliably with up to 1,500 N clamping force; order the toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Toggle clamp 411 – stainless steel horizontal-foot clamp with hook, 1,500 N clamping force (Kukamet) A Toggle clamp 411 engineered for rapid, repeatable fastening in jigs, fixtures and assembly stations, featuring a horizontal foot and integrated hook for secure, low-profile locking. Stainless steel construction for corrosion resistance Horizontal-foot mounting for bench or fixture use 1,500 N maximum clamping force Integrated hook with 50 mm thread length Reliable clamping that keeps production moving The compact design delivers consistent clamping performance under repetitive use. With a maximum clamping force of 1,500 N and a rated holding force of 1,800 N, the device provides measurable, verifiable restraint for short-cycle assembly and test rigs. Its stainless steel build reduces the risk of material degradation in workshop environments, while the horizontal-foot format enables low-profile installation into bespoke fixtures. These technical characteristics translate into fewer interruptions on the line and a more predictable production rhythm. Quick installation and repeatable positioning for jigs Fitted with a 50 mm threaded spindle, the clamp facilitates straightforward adjustment of reach and engagement depth during setup. The relatively low weight of 0.21 kg and compact footprint make the unit suitable for dense fixture layouts where space is limited. Because adjustments are mechanical and retention is provided by the integrated hook, repeat cycles return to the same position with minimal rework. This contributes to higher throughput and reduced set-up times for medium-duty clamping tasks. Maintenance-friendly materials for long service life Constructed from stainless steel, the clamp resists common workshop contaminants and requires only basic inspection to maintain performance. The material choice and simple mechanical design reduce maintenance intervals and the need for specialised spare parts. For operations prioritising reliability and low life-cycle effort, these attributes mean lower total cost of ownership over time and predictable availability for production schedules. Where this clamp adds value on the shop floor Designed primarily for jigs, assembly stations and small fixture systems, the clamp suits applications where compact locking with a hook is needed — for example panel holding, temporary part positioning and test fixturing. The horizontal-foot mounting style enables secure anchoring to flat surfaces such as fixture plates or bench tops. Its combination of hook engagement and adjustable thread length makes it versatile for both woodworking and light fabrication tasks where fast, repeatable locking is required. For corrosion-resistant, repeatable clamping select the Kukamet Toggle clamp 411 and contact Metav Werkzeuge for tailored advice and supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: S411-2 GTIN: 8680731504149 Manufacturer: Kukamet eClass: 21041718 ETIM: EC011973 Facts Weight: 0.21 kg Max clamping force: 1,500 N Max holding force: 1,800 N Thread length: 50 mm Mounting type: horizontal foot Special features Material: stainless steel Integrated hook Category: Clamps Story trigger: lever clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet toggle clamp (SKU S411-2) provides a maximum clamping force of 1,500 N and a maximum holding force of 1,800 N, suitable for medium-duty fixture and assembly tasks. Is the clamp suitable for corrosive or humid workshop environments? The clamp is made from stainless steel, offering enhanced corrosion resistance for workshop and light outdoor conditions; proper cleaning extends service life. How is the clamp mounted and adjusted? Mounting is via a horizontal foot; adjustment is achieved through the 50 mm threaded spindle that sets the engagement length and locking position. What applications is this clamp intended for? Typical uses include jigs, fixture plates, assembly stations and temporary part positioning where a hook-engagement, low-profile locking solution is required. What are the physical dimensions and weight of the unit? The clamp weighs 0.21 kg and includes a 50 mm thread length for adjustment; refer to the SKU S411-2 for detailed dimensional drawings if required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Horizontal Toggle Clamp With Safety Lock, Stainless Steel, Hook 45mm Thread - Kukamet
Take advantage of a compact, corrosion‑resistant clamp that combines a stainless steel body with a mechanical safety locking mechanism and a secure hook for reliable holding; the robust holding force of 2,000 N and a clamping force of 1,500 N ensure stable fixturing. Order the Locking Toggle Clamp 351 directly via Metav Werkzeuge or ask our consultants if needed. Locking Toggle Clamp 351 — stainless‑steel latch clamp with safety lock Locking Toggle Clamp 351 is a stainless‑steel locking latch clamp designed for horizontal mounting in jigs, fixtures and production tooling where secure, repeatable holding is required. Stainless steel construction for durability Safety locking mechanism for safe retention Holding force 2,000 N for secure clamping Horizontal foot for stable mounting Integrated hook for reliable engagement Corrosion resistance and predictable holding performance Made from stainless steel, this clamp is designed to resist corrosion in workshop and light industrial environments, reducing maintenance intervals and preserving dimensional integrity over time. With a holding force 2,000 N and a clamping force 1,500 N, the device gives a quantifiable performance baseline for fixture design; these values allow engineers to calculate safety margins and select appropriate fasteners and support elements. The robust mechanical characteristics support repeatable positioning and help maintain cycle stability in automated or semi‑automated production. Safer operation through mechanical locking and secure engagement The built‑in safety locking mechanism prevents unintended release during vibration or handling, improving operator safety and process reliability. An integrated hook ensures positive engagement with the mating striker, while the horizontal foot mounting provides a low‑profile base that simplifies attachment to plates and tooling boards. Fine adjustment is enabled by the thread length 45 mm, allowing precise setting of the clamping point and compensation for wear without replacing major components. These features together reduce the risk of workpiece movement and minimise rework. Compact, lightweight design for easy integration At weight 0.175 kg, the clamp is light enough to be fitted into tight assemblies without adding significant mass, yet robust enough for demanding clamping tasks. The compact form factor facilitates use in small jigs, modular fixture systems and retrofit applications where space is limited. The combination of mechanical reliability and modest footprint supports higher throughput by enabling quicker changeovers and fewer interruptions for fixture maintenance. As a component within a clamping technology portfolio, this model balances strength, adjustability and longevity. Contact Metav Werkzeuge for a specification check or to arrange procurement: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: S351-2-L GTIN: 8680731504736 Manufacturer: Kukamet Facts Weight: 0.175 kg Holding force: 2,000 N Clamping force: 1,500 N Thread length: 45 mm SKU: S351-2-L eClass: 21041718 ETIM: EC011973 Special features Material: stainless steel Mounting: horizontal foot Safety locking mechanism Integrated hook With hook: yes FAQ What maximum holding and clamping forces does the clamp provide? The Locking Toggle Clamp 351 delivers a holding force of 2,000 N and a clamping force of 1,500 N, values that support reliable retention in a wide range of fixture applications. Can this clamp be mounted on vertical or horizontal surfaces? The clamp is designed with a horizontal foot for stable mounting; alternative orientations require validation of load paths and mounting strength for the intended application. Is the clamp suitable for corrosive or humid workshop environments? Yes, the stainless‑steel construction of the Locking Toggle Clamp 351 improves resistance to corrosion and makes it suitable for workshop conditions where moisture is present. How is fine adjustment achieved on this model? Adjustment is provided via the threaded spindle with a thread length of 45 mm, which permits precise setting of the clamping point to accommodate component tolerances and wear compensation. What typical applications are recommended for this clamp? The clamp is intended for jigs, fixtures and small production tooling where secure, repeatable holding is required; it is particularly suited to light industrial assembly and machining setups. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Pneumatic Pushrod Clamp Horizontal Base, Zinc-Plated Cast Body, 12 mm Piston - Kukamet
Take advantage of the robust galvanised cast body combined with 3,700 N holding force and a compact 1.09 kg mass for dependable clamping in repetitive production tasks. Order the Pneumatic push‑rod clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Pneumatic Push‑rod Clamp 671 by Kukamet — 1,500 N thrust, 3,700 N holding force A versatile pneumatic push‑rod clamp, 671, designed for secure workholding in assembly lines, fixtures and automated jigs. Galvanised cast body Max holding force 3,700 N Piston diameter 12 mm Thrust force up to 1,500 N Compact design, weight 1.09 kg Consistent clamping that keeps production moving The Pneumatic push‑rod clamp 671 delivers reproducible clamping with a holding force of 3,700 N and a thrust force of 1,500 N, making it suitable for short-cycle production and fixture applications where repeatability matters. The piston diameter 12 mm balances force and stroke control, enabling precise engagement without excessive air consumption. For production planners, this combination translates into fewer rejects and steadier throughput, as the pneumatic actuation provides fast, reliable motion that integrates into pick-and-place sequences or repeated part positioning. Built to endure daily use with low maintenance Constructed with a galvanised cast body, the unit resists corrosion and mechanical wear in workshop and industrial environments, reducing maintenance intervals. The compact weight of 1.09 kg supports lightweight fixture designs while contributing to durable performance under continuous cycling. The horizontal foot mounting ensures a secure mechanical connection to frames and plates, and the robust housing protects internal components from impact and contamination, thereby extending service life and lowering running costs over multiple production campaigns. Simple integration for automated systems and fixtures Engineered for pneumatic installations, this clamp features a standard actuation style and mounting that eases mechanical and pneumatic integration into conveyors, jigs or assembly fixtures. The straightforward mechanical interface and stable clamping behaviour help to shorten setup time for tooling changes and accelerate commissioning in automated lines. The reliable actuation characteristics minimise process variability, supporting consistent part quality and a measurable improvement in operational efficiency for engineering and production teams. For specification advice and assured delivery, rely on Kukamet quality through Metav Werkzeuge — contact Metav Werkzeuge for detailed compatibility checks and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 671-3-Q12 GTIN: 8680731503166 Manufacturer: Kukamet Facts Weight: 1.09 kg Thrust force (max): 1,500 N Holding force (max): 3,700 N Piston diameter: 12 mm Special features Galvanised with cast body Horizontal foot mounting Category: Spanner eClass: 21041716 ETIM: EC011973 FAQ What clamping forces does the clamp provide? The Pneumatic push‑rod clamp 671 from Kukamet provides a holding force of 3,700 N and a thrust force up to 1,500 N (SKU 671-3-Q12). How is the clamp mounted to fixtures? The unit is supplied for horizontal foot mounting, allowing secure fixation to plates or jig frames for stable workholding. What is the unit weight and how does that affect fixture design? The clamp weighs 1.09 kg, which supports compact fixture design while maintaining mechanical stability during repeated cycles. Can this clamp be used in automated pneumatic systems? Yes, the pneumatic actuation with a 12 mm piston diameter is suitable for automated sequences and can be integrated into assembly lines and jigs where rapid, repeatable movement is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Pneumatic Push‑Rod Clamp Horizontal Base, Zinc Plated, 12 mm Piston - Kukamet
Take advantage of a compact, zinc‑plated clamp that delivers reliable, repeatable clamping: 2,960 N holding force and 1,500 N push force ensure secure fixation in automated fixtures. Order the pneumatic push‑rod clamp directly via Metav Werkzeuge or consult its specialists for integration advice. Pneumatic Push‑Rod Clamp 621 — Kukamet clamp with 1,500 N push force and Ø12 mm piston A Pneumatic Push‑Rod Clamp 621 engineered for secure, repeatable clamping in industrial jigs, assembly stations and automated fixtures Zinc-plated corrosion protection Max holding force 2,960 N Push force 1,500 N piston Ø12 mm Horizontal foot for secure mounting Consistent, measurable clamping performance for production lines The pneumatic push‑rod clamp provides a clearly defined mechanical output that supports process stability: max push force 1,500 N (pushing) and holding force 2,960 N (retention). The difference between push and holding forces is explained by the clamp’s mechanical advantage and internal geometry; the actuator produces the specified push force while the clamping geometry and contact area determine the holding capability. Delivered with a 12 mm piston diameter, the actuator is suited to medium‑force fixture tasks where repeatability and cycle speed matter. Specified values allow straightforward calculation of fixture loads and cycle requirements for machine designers and fixture engineers. Robust construction and straightforward mounting for long service life Built from zinc‑plated components, the clamp resists surface corrosion in typical workshop and production environments, reducing the need for frequent replacement. The horizontal foot mounting ensures stable attachment to subplates and tooling plates, simplifying alignment in modular fixture systems. At 1.14 kg the unit is compact enough for dense fixture layouts while remaining substantial enough for rugged use. Corrosion protection and solid mounting reduce downtime and maintenance effort, supporting continuous operation in series production or demanding jobbing environments. Integration, procurement and traceable specifications for engineering teams Technical classification and identifiers are provided for procurement and system integration: eClass 21041716, ETIM EC011973 and GTIN 8682843521601 allow clear matching in BOMs and ERP systems. The clamp is supplied under SKU 621-3-Q12, facilitating ordering and inventory management. Where control or sequencing is required, the actuator can be incorporated into pneumatic valve circuits; piston dimension and force data support valve sizing and cycle timing calculations. The product’s compact profile and measurable output make it suitable for retrofitting existing fixtures as well as new automation designs. Contact Metav Werkzeuge to discuss integrating the Kukamet pneumatic push‑rod clamp 621 into production equipment and to arrange fast delivery and technical documentation from Emmerich Technical data SKU: 621-3-Q12 GTIN: 8682843521601 Manufacturer: Kukamet Facts Max holding force: 2,960 N Max push force: 1,500 N Piston diameter: 12 mm Weight: 1.14 kg eClass: 21041716 ETIM: EC011973 Special features Material: zinc‑plated Mounting: horizontal foot Category: clamp Rapid dispatch noted in product listing FAQ What clamping forces are specified for this clamp? The Kukamet pneumatic push‑rod clamp 621 specifies a push force of 1,500 N and a holding force of 2,960 N, values suitable for medium‑force fixture applications. Is the clamp suitable for integration into automated jigs? Yes, the clamp’s compact build, 12 mm piston, and horizontal foot mounting make it suitable for automated jigs and modular fixture systems. Which identifiers help with procurement and parts management? Use SKU 621-3-Q12, GTIN 8682843521601, eClass 21041716 and ETIM EC011973 for BOM and ERP matching. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Push Rod Clamp Horizontal Foot, Zinc-Plated, 1700 N Holding Force - Kukamet
Take advantage of robust clamping power and compact installation for dependable production processes: the combination of galvanised construction, clear numerical performance data and easy mounting supports consistent results on assembly jigs and fixtures. Order the 511 push-rod clamp directly via Metav Werkzeuge or ask the consultants if further specification is required. 511 Push-rod clamp — galvanised, 1.5 kN pressing force (Kukamet) A 511 push-rod clamp designed for horizontal mounting, providing secure holding for light‑to‑medium assembly and welding tasks in workshop and production settings Galvanised construction for corrosion resistance Max. holding force 1,700 N Horizontal foot for secure mounting Compact design, 0.28 kg weight Dependable clamping performance for repeatable processes The 511 is engineered as a production‑grade push-rod clamp that converts manual actuation into a defined clamping action. With a max. pressing force of 1,500 N and a max. holding force of 1,700 N, the device supplies quantifiable restraint suitable for repeatable operations on jigs and small fixtures. The pressure spindle specified as M6x40 permits fine contact adjustment and straightforward replacement; this mechanical clarity simplifies setup decisions and reduces downtime compared with more complex systems. The clear numeric ratings enable planners and buyers to evaluate cycle‑by‑cycle performance precisely. Space-efficient mounting and simple integration into tooling The clamp’s horizontal foot mounting supports low‑profile installation where lateral clearance and predictable clamping direction are required. At 0.28 kg, the component is compact and light enough to be integrated into modular fixtures without adding significant mass, yet robust enough for repetitive use. The galvanised finish enhances corrosion resistance, which lengthens service intervals in non‑controlled environments and keeps maintenance cycles predictable. For engineers designing fixture panels, this translates into lower fixture weight, minimal rebalancing and easier handling during reconfiguration. Low-maintenance specification with workshop‑grade reliability Constructed from galvanised material and devoid of auxiliary electronics, the clamp emphasises mechanical simplicity and longevity. The absence of complex maintenance routines reduces total cost of ownership while preserving steady clamping behaviour across production runs. Specification transparency—threads, forces and mounting type—supports procurement confidence and simplifies spare‑part planning. Paired with a reliable supplier network, the unit suits small workshops and industrial buyers seeking a pragmatic balance between performance and lifecycle stability. Secure production‑grade clamping with the Kukamet 511 — contact Metav Werkzeuge for specification advice and reliable supply from Emmerich Technical Data SKU: 511-2 GTIN: 8680731504163 EClass: 21041716 ETIM: EC011973 Facts Weight: 0.28 kg Max pressing force: 1,500 N Max holding force: 1,700 N Pressure spindle: M6x40 Special features Material: galvanised Mounting: horizontal foot Special feature: none FAQ What is the maximum holding force of this clamp? The 511 push-rod clamp from Kukamet provides a maximum holding force of 1,700 N as specified for secure temporary fixation. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, intended for fixed attachment to jigs or fixture plates; the compact footprint supports low‑profile integration. Which spindle is fitted for pressure adjustment? The unit is supplied with a pressure spindle with thread M6x40, allowing precise contact adjustment and easy replacement. Is the surface finish suitable for humid workshop environments? The clamp is galvanised, offering enhanced corrosion resistance compared with untreated steel and supporting longer maintenance intervals in typical workshop conditions. Can the clamp be used in welding fixtures? Yes, the mechanical clamping action and specified forces make the 511 suitable for many light‑to‑medium welding and assembly fixtures where lateral mounting and repeatable clamping are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base With Hook, 2000 N Holding Force - Kukamet
Take advantage of a compact clamp that combines robust clamping force, a horizontal foot for stable mounting and a quick hook closure to keep production jigs secure. Order the clamp directly via Metav Werkzeuge or consult our advisors for matching fixtures and implementation support. Toggle Latch Clamp 331 — horizontal foot, hook variant by Kukamet A Toggle Latch Clamp 331 designed for secure, repeatable fastening in fixtures and jigs where a compact, high-force closure is required for workshop and light industrial use. Horizontal foot mounting design 1,500 N maximum clamping force 2,000 N maximum holding force Blackened finish with hook attachment Reliable clamping performance for repetitive use The latch delivers a consistent clamping force that supports dependable fixation in small-series production and workshop jigs. With a rated 1,500 N clamping capacity and 2,000 N holding force, the design focuses on repeatable results and process reliability. The compact construction reduces footprint on fixtures while maintaining the mechanical advantage needed for firm closure, helping to keep cycle times stable and quality inspections consistent. The combination of measurable forces and a simple mechanical action makes this clamp suitable for production where reproducibility is essential. Quick mounting and secure engagement for efficient assembly Engineered for straightforward integration, the clamp features a horizontal foot for stable attachment and a hook closure that enables fast engagement and release in assembly operations. A thread length 45 mm allows flexible fixing options for a range of base plates and jigs, simplifying retrofitting into existing tooling. The quick-lock action supports efficient handling during set-up changes and reduces downtime between operations, contributing to leaner workflows and easier fixture management in busy workshops. Surface and handling designed for workshop conditions Finished in a blackened, burnished finish, the clamp presents a discreet appearance and a treated surface that helps to reduce glare in bright working environments. Weighing 0.16 kg, the unit is lightweight enough for manual handling yet engineered for mechanical durability in normal workshop use. The compact steel construction balances low mass with the mechanical robustness required for repeated clamping cycles, making it a practical choice for both prototype rigs and production jigs where space and weight are considerations. Practical placement in the clamping programme As a member of the clamping family, this latch is suitable for securing lids, panels and fixture components where a repeatable, measurable closure is required. The model integrates easily into common clamping layouts and complements toggle and lever clamping systems by providing a reliable closure point with controlled force. Identified as SKU B331-2 and listed under clamps, the unit is a pragmatic option for workshops seeking a straightforward, performance-focused closure without unnecessary complexity. Choose the Kukamet Toggle Latch Clamp 331 for compact, high-force clamping—contact Metav Werkzeuge in Emmerich for tailored advice and to place your order: +49 2822 7131930, info@metav-werkzeuge.com Technical Data SKU: B331-2 GTIN: 8680731508413 Manufacturer: Kukamet Facts Maximum clamping force: 1,500 N Maximum holding force: 2,000 N Thread length: 45 mm Weight: 0.16 kg Special features Horizontal foot mounting With hook Material: blackened, burnished finish Category: Clamps FAQ What clamping and holding forces are specified for this clamp? The Toggle Latch Clamp 331 (Kukamet, SKU B331-2) specifies a maximum clamping force of 1,500 N and a holding force of 2,000 N. How is the clamp mounted to a fixture? Mounting is via a horizontal foot designed for stable attachment; the thread length of 45 mm provides flexibility for different plate thicknesses and fastener choices. Is the latch suitable for frequent engagement and release? The latch is engineered for repeatable operation and quick hook engagement, making it appropriate for fixtures and jigs subject to frequent cycles. What surface finish does the clamp have and why does it matter? The clamp is supplied with a blackened, burnished finish, offering a discreet workshop appearance and a treated surface that improves handling and reduces visible wear. Which applications are typical for this clamping model? Typical uses include securing panels, lids and fixture inserts in assembly, testing rigs and small-batch production where compact, measurable closure is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base, 50 mm Thread Length, Zinc Plated, With Hook - Kukamet
Robust galvanised construction combined with a compact 0.21 kg body provides dependable clamping and holding performance — 1,500 N clamping force and 1,800 N holding force ensure secure fixtures on production lines and jigs. Order the Kukamet 411 latch clamp directly via Metav Werkzeuge or ask our consultants for technical clarification. Kukamet 411 horizontal toggle latch clamp — galvanised, with hook Kukamet 411 is a horizontal-base toggle latch clamp designed for secure, repeatable fastening in industrial and workshop fixtures Galvanised steel for corrosion resistance Stable horizontal base for easy mounting Clamping force up to 1,500 N Holding force up to 1,800 N Consistent, measurable performance that keeps production moving Engineered for reliable engagement, this horizontal toggle clamp delivers a defined clamping force of 1,500 N and a holding force of 1,800 N, values that translate into repeatable fixture pressure and reduced rework. The difference between clamping and holding forces is important: clamping force denotes the active closing pressure applied during locking, while holding force indicates the continued resistance against vibration and external loads. For assembly and welding jigs where repeatability and predictable load capacity matter, the clamp’s rated forces provide a clear basis for fixture design and risk assessment. The galvanised finish supports long-term dimension stability in common shop environments. Space-saving installation and adjustable reach for versatile fixtures The compact construction at 0.21 kg and the horizontal base make this latch clamp suitable where space is limited or multiple clamps are clustered. The thread length 50 mm allows for adjustable latch engagement so the closure can be fine-tuned for different panel thicknesses or mating plates. A small mass reduces dynamic loads on moving assemblies and simplifies handling during fixture setup. The integrated hook secures the mating part with minimal play, making the device appropriate for repetitive indexing operations and small-batch production where quick manual actuation is required. Galvanised surface and straightforward materials choice for durability A galvanised finish provides corrosion resistance in typical workshop atmospheres and helps maintain surface appearance and function without specialised coatings. Constructed for simple robustness rather than complex maintenance, the clamp is suitable for use on steel, aluminium and similar substrates when combined with appropriate fasteners. The horizontal-foot mounting enables direct attachment to flat plates or rails, reducing the need for additional brackets. Supplied through Metav Werkzeuge’s distribution in Emmerich, the component benefits from a reliable European supply chain and clear logistical traceability. Request a technical quote or delivery schedule from Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice on the Kukamet 411 latch clamp and assured European stock supply. Technical data Article number: 411-2 GTIN: 8680731502527 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.21 kg Clamping force: 1,500 N Holding force: 1,800 N Thread length: 50 mm Special features Material: galvanised steel Fastening type: horizontal base With hook Category: spanner / clamp Brand: Kukamet FAQ What maximum forces can the clamp handle? The Kukamet 411 latch clamp is rated for a clamping force of 1,500 N and a holding force of 1,800 N, suitable for many light- to medium-duty fixture tasks. How is the clamp mounted? Mounting is via the horizontal base; the design allows direct attachment to flat plates or rails and was created to simplify positioning in jigs and fixtures. Is the finish suitable for mildly corrosive environments? Yes, the galvanised surface provides basic corrosion resistance appropriate for standard workshop conditions and indoor production areas. Can the hook be adjusted for different panel thicknesses? The device includes a 50 mm thread length for adjustment, enabling fine-tuning of engagement to match panel or plate variations. Which materials pair well with this toggle clamp? The clamp’s construction and fastening options make it compatible with steel and aluminium assemblies when used with appropriate fasteners; selection depends on the specific fixture design and load assumptions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base, Metal Handle, Hook, 50 mm Thread Length - Kukamet
Robust stainless-steel construction and a horizontal base combine with a hooked latch and a metal handle to deliver reliable, repeatable clamping at up to 1,500 N of pressure; order the Kukamet 361 latch clamp via Metav Werkzeuge for secure fixture solutions or ask our consultants for specification support. 361 latch clamp (S361-2) by Kukamet — stainless steel, horizontal base The 361 latch clamp is a compact lever clamp designed for secure, repeatable workholding in jigs, fixtures and production benches where a horizontal mounting foot and hooked engagement are required. Stainless steel housing and hook Horizontal base for easy fixture mounting Robust metal handle for long service life 1,500 N clamping force, 1,725 N holding Dependable clamping power for consistent production results The lever-style latch offers a high clamping-to-size ratio: 1,500 N of pressing force with a holding force of 1,725 N provides stable workholding that reduces part movement during machining or assembly. This translates into fewer rejects and tighter tolerances on repeat runs, while the positive hooked engagement ensures the clamped element remains in place under vibration. The mechanical design focuses on repeatable results and predictable cycle behaviour, making the clamp suitable for medium-duty industrial applications where process reliability matters. Low-maintenance stainless-steel build for harsh environments Constructed from stainless steel with a metal handle, this clamp is specified for environments where corrosion resistance and longevity are priorities. The stainless-steel surfaces simplify cleaning and reduce the need for frequent replacement, which lowers total lifetime maintenance. For applications where exposure to coolant, humidity or occasional wash-down occurs, the material choice helps maintain functional reliability and a uniform clamping feel throughout long production cycles. Compact footprint and straightforward mounting save assembly time With a horizontal base and a slim profile, the clamp integrates easily into trolleys, modular fixtures and welded jigs without occupying excessive space. The lightweight construction (approx. 0.1 kg) minimises added mass on moving subassemblies, and the 50 mm thread provides sufficient adjustment range for varied workpiece thicknesses. These design choices simplify fixture layout and allow denser packing of clamps where several hold-down points are required, improving workflow and reducing setup iterations. Adjustable hook and lever for precise, repeatable positioning The hooked latch and threaded spindle allow fine adjustment of clamping height and pre-tension, which supports fast changeovers and consistent contact pressure across batches. The mechanism is engineered for straightforward operation and visible engagement, aiding operators during manual assembly or automated jigs. Supplied as SKU S361-2, this latch clamp suits applications that demand reliable mechanical engagement, simple maintenance and long-term dimensional stability. For procurement or technical advice on the Kukamet 361 latch clamp, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for fast, expert guidance Technical Data Article number: S361-2 GTIN: 8680731509564 Manufacturer: Kukamet Category: Spanner eClass: 21041718 ETIM: EC011973 Facts Maximum pressing force: 1,500 N Maximum holding force: 1,725 N Thread length: 50 mm Weight: 0.1 kg Special features Material: stainless steel Mounting type: horizontal base Handle: metal handle With hook: yes Application type: lever/latch clamp FAQ What clamping and holding forces does this clamp provide? The Kukamet 361 latch clamp delivers a maximum pressing force of 1,500 N and a holding force of 1,725 N, providing stable fixation for medium-duty fixtures. Is the clamp suitable for use in humid or wash-down environments? Thanks to its stainless steel construction and metal handle, the 361 latch clamp resists corrosion and is appropriate for situations with moisture exposure or occasional cleaning. How is the clamp mounted and adjusted? The clamp mounts via a horizontal base and uses a threaded spindle (50 mm thread length) for height adjustment and precise engagement of the hooked latch. Can the clamp be used on moving assemblies or lightweight fixtures? Yes; at approximately 0.1 kg, the latch clamp is compact and light enough for fixtures where added mass must be minimised while retaining reliable clamping force. Which applications are typical for this latch clamp? Common uses include jigs, assembly fixtures, welding benches and inspection stations where repeatable, mechanical locking and quick manual operation are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Base, Metal Handle, Zinc Plated, With Hook, 50 mm Thread Length - Kukamet
Take advantage of the combination of robust zinc-plated construction, a horizontal base for stable mounting and a hooked lever that ensures a positive lock; compact and light, it supports clamping and holding forces up to 1,725 N for reliable fixture work. Order the clamp directly via Metav Werkzeuge or consult our advisors for application guidance. 361 latch clamp – Horizontal-foot locking clamp, zinc-plated (Kukamet) A 361 latch clamp for secure fastening in jig, fixture and general workshop applications, designed for horizontal mounting and positive engagement via a hooked lever. Zinc-plated corrosion resistance Horizontal base for stable mounting Metal handle for enhanced durability Hooked lever for positive engagement Faster set-up and consistent part retention The latch design delivers rapid engagement and release, reducing cycle times during assembly and short-run production. With a holding force of 1,725 N and a maximum pressing force of 1,500 N, the clamp provides measurable performance that supports repeatable processes. The thread length of 50 mm allows fine height adjustment of the clamping spindle, so fixtures can be aligned precisely without improvisation. This reliability translates into fewer reworks and a steadier throughput on the shop floor. Durable finish keeps downtime to a minimum A zinc-plated surface protects the clamp against corrosion in typical workshop environments, extending service life and lowering maintenance needs. The metal handle resists wear from frequent operation and preserves tactile feedback during locking and unlocking. By choosing a corrosion-resistant finish paired with robust components, the design reduces lifecycle costs and supports continuous operation in humid or mildly corrosive conditions. Space-saving design for tight fixtures Weighing just 0.1 kg, the unit is compact yet strong, making it suitable for confined jigs and modular fixture plates where mass and footprint matter. The horizontal base facilitates low-profile mounting on flat surfaces, while the hooked engagement ensures a secure lock even when clearance is limited. This compact geometry makes the clamp a practical component for retrofits and new designs where a full vertical clamp would obstruct toolpaths or access. Clear function and easy integration The simple lever mechanism provides a direct mechanical advantage: minimal operator effort achieves high clamping forces, enabling manual operation without additional actuation. The presence of a hooked lever means parts are held with positive contact, lowering the risk of slippage during machining or assembly. For designers and technicians, the clamp integrates with standard fixture hardware and permits precise spindle adjustment thanks to the threaded spindle length. Choose Kukamet quality for dependable clamping: request the 361 latch clamp via Metav Werkzeuge for prompt supply and technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 361-2 GTIN: 8680731504606 eCl@ss: 21041718 ETIM: EC011973 Facts Weight: 0.1 kg Maximum pressing force: 1,500 N Maximum holding force: 1,725 N Thread length: 50 mm Special features Material: zinc-plated Mounting: horizontal foot Handle: metal Engagement: hooked lever Category: clamping toggle FAQ What is the maximum holding force of this clamp? The 361 latch clamp from Kukamet provides a maximum holding force of 1,725 N, suitable for secure retention in many fixture applications. Can the clamp be mounted on horizontal surfaces? Yes, the clamp features a horizontal base intended for secure mounting on flat fixture plates and jigs. Is the handle durable for frequent operation? The metal handle design ensures long-term durability and consistent tactile feedback, reducing wear under regular use. What surface protection does the clamp have? The unit is zinc-plated, offering corrosion resistance appropriate for standard workshop environments. What adjustment range is provided for spindle height? The threaded spindle has a length of 50 mm, enabling fine height adjustment for precise clamping positions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Toggle Clamp Horizontal Foot With Hook, Zinc Plated, 45 mm Thread Length - Kukamet
Reliable clamping performance with a holding force of 2,000 N and a clamping force of 1,500 N, combined with a galvanised finish and compact, lightweight construction, ensures secure, repeatable fixturing. Order the Toggle latch clamp 351 directly via Metav Werkzeuge or consult our advisers for integration support. Toggle latch clamp 351 — horizontal-base toggle clamp, galvanised (Kukamet) The Toggle latch clamp 351 is a compact locking clamp for fixture and assembly use, featuring a horizontal base and an integrated hook for fast engagement and reliable retention. Galvanised finish for corrosion resistance Horizontal base for stable mounting Holding force up to 2,000 N Compact design, only 0.175 kg Reliable clamping for repeatable processes The clamp delivers a controlled clamping force of 1,500 N and a holding force of 2,000 N, values that translate into consistent part retention across repeated cycles. These measured forces mean that the device can be relied upon where repeatability and safety are required; the distinction between clamping and holding force is important — clamping force describes the active closing pressure, while holding force indicates the maximum sustained retention under load. The robust mechanism reduces setup variation and supports stable machining, welding or assembly operations. Built to last in workshop environments Constructed from galvanised material the latch resists corrosion, extending service life in humid or industrial atmospheres. The compact component weighs just 0.175 kg, making it simple to handle during fixture assembly and reducing the load on jigs. Where space and durability matter, the combination of finish and lightweight construction keeps maintenance intervals low and inventory turnover predictable, supporting efficient production planning. Fast installation and positive engagement for productivity Designed with a horizontal base for secure mounting and an integrated hook, the clamp enables quick engagement and straightforward alignment on workholding plates. The thread length 45 mm allows for flexible adjustment during setup, accommodating a range of panel thicknesses and engagement distances. The low-profile format and simple fixing method reduce cycle time when swapping fixtures, helping to maintain throughput in busy shops. Versatile use across fixtures and assembly tasks The device suits a wide range of clamping tasks where a compact, repeatable latch is required, from small jigs to light-duty assembly fixtures. Delivered as a practical solution for secure fastening, it supports standard workshop workflows without complex assembly. The solid mechanical design ensures reliable operation, while procurement through Metav provides the additional advantage of a central European quality filter and dependable supply for production-critical components. Contact Metav Werkzeuge for technical advice and to arrange supply of the Kukamet Toggle latch clamp 351 — our team in Emmerich will advise on mounting options and delivery to the workshop Technical Data SKU: 351-2 GTIN: 8680731502466 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.175 kg Clamping force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Special features Material: galvanised Mounting: horizontal base With hook Category: clamps (spanner) FAQ What is the difference between clamping force and holding force for this clamp? Clamping force refers to the active closing pressure (1,500 N) and holding force denotes the maximum sustained retention (2,000 N) of the Toggle latch clamp 351 from Kukamet (SKU 351-2). Can the clamp be mounted on vertical surfaces? The latch is supplied with a horizontal base for stable mounting; with appropriate fixture design the Kukamet clamp can be adapted to a variety of orientations, but the standard configuration is horizontal. Is the surface treated for corrosion protection? Yes, the component is galvanised, providing corrosion resistance suitable for workshop and light industrial environments. What adjustment options are available for engagement length? The clamp features a threaded engagement with a thread length of 45 mm, allowing adjustment of the hook position to suit different panel thicknesses and engagement distances. Which applications suit this type of latch clamp? The clamp is intended for fixtures, jigs and light assembly tasks where compact, repeatable locking is required; it is particularly useful where quick engagement and reliable retention are priorities. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500 N Verschlussspanner, senkrechter Fuß, Haken, Gewindelänge 45mm, Schwarz brüniert - Kukamet
Der Verschlussspanner B312-2 überzeugt durch seine kompakte Bauform, die Haltekraft von bis zu 2000 N und die maximale Druckkraft von 1500 N, sodass sichere Spannungen bei beengten Platzverhältnissen möglich sind. Nutzen Sie die Kombination aus robuster Oberflächenbehandlung und einfacher Befestigung für zuverlässige Werkstattabläufe. Bestellen Sie den Artikel direkt über Metav oder fragen Sie bei Bedarf die technische Beratung an. Verschlussspanner B312-2 von Kukamet Der Verschlussspanner B312-2 ist ein Hebelspanner für Montage- und Spannaufgaben mit senkrechter Fußbefestigung, ausgelegt für präzise Halte- und Druckkräfte in Werkstatt und Produktion. Verschlussspanner »B312-2« von Kukamet Haltekraft bis 2000 N für sichere Fixierung Druckkraft max. 1500 N für stabile Verriegelung Befestigung: senkrechter Fuß für einfache Montage Material: Schwarz brüniert für Korrosionsschutz Robuste Oberfläche für Langlebige Einsätze Die Schwarz brünierte Oberfläche schützt vor Korrosion und reduziert Lichtreflexionen bei Montagearbeiten. Dadurch bleibt die Funktionalität langfristig erhalten und der Wartungsaufwand wird reduziert. Für Anwender, die regelmäßige Spannvorgänge durchführen, bedeutet das weniger Nacharbeit und verlässliche Ergebnisse bei jeder Nutzung. Kompakte Bauweise und Sichere Befestigung Mit senkrechtem Fuß und einer Gewindelänge von 45 mm lässt sich der Spanner platzsparend montieren. Die Konstruktion eignet sich insbesondere für begrenzte Einbauräume, wo trotzdem eine hohe Haltekraft verlangt wird. Die einfache Montage ermöglicht schnelle Rüstzeiten und verkürzt Stillstandszeiten an der Werkbank. Leistung, Die über Betriebsanforderungen Hinausgeht Die Kombination aus Druckkraft von 1500 N und Haltekraft von 2000 N sorgt für sichere Verriegelung auch bei dynamischen Belastungen. Anwender profitieren von konstanter Klemmsicherheit, wodurch Bauteile während Bearbeitung oder Transport zuverlässig fixiert bleiben. Diese Leistungswerte sind entscheidend für Wiederholpräzision in Serienprozessen. Praktische Ausstattungsmerkmale Für Den Alltag Der Spanner verfügt über einen integrierten Haken, der das Einhaken und Sichern von Bauteilen erleichtert. Das geringe Gewicht von 0,175 kg macht Handhabung und Positionierung einfach, ohne unnötige Belastung bei wiederkehrenden Einsätzen. So bleibt die Handhabung ergonomisch und effizient. Greifen Sie zur bewährten Spannlösung von Kukamet: Der Verschlussspanner B312-2 kombiniert hohe Haltekraft mit einfacher Montage und langlebiger Oberfläche — bestellen Sie über Metav und nutzen Sie unsere technische Beratung für passgenaue Einsatzempfehlungen. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Produktmerkmale Artikelnummer: B312-2 Marke: Kukamet Bezeichnung: Verschlussspanner 312 Fakten Druckkraft max. N: 1500 Haltekraft max. N: 2000 Gewicht kg: 0.175 Gewindelänge mm: 45 Besonderheiten Befestigungsart: senkrechter Fuß Material: Schwarz brüniert Mit Haken Storytrigger: Hebelspanner Besonderheit: Keine eClass: 21041718 ETIM: EC011973 FAQ Wie hoch ist die maximale Haltekraft dieses Spanners? Die maximale Haltekraft des Verschlussspanners B312-2 von Kukamet beträgt 2000 N, sodass Bauteile auch unter Belastung sicher fixiert bleiben. Ist der Spanner für beengte Einbausituationen geeignet? Ja, der Kukamet Verschlussspanner B312-2 verfügt über eine kompakte Bauform und eine Befestigung mit senkrechtem Fuß, was die Montage in engen Bereichen erleichtert. Welche Gewindelänge muss beim Einbau berücksichtigt werden? Für den Einbau des Verschlussspanner B312-2 ist eine Gewindelänge von 45 mm relevant; diese Angabe hilft bei der Auswahl passender Schrauben und Einbaumaße. Eignet sich der Spanner für den täglichen Werkstatteinsatz? Der Verschlussspanner B312-2 ist dank der schwarz brünierten Oberfläche, des geringen Gewichts und der zuverlässigen Kräfte für wiederkehrende Spannaufgaben in Werkstatt und Produktion ausgelegt. Verfügt der Spanner über zusätzliche Befestigungsoptionen? Der Kukamet Verschlussspanner B312-2 ist mit einem Haken ausgestattet und für die Montage mit senkrechtem Fuß vorgesehen, was flexible Befestigungsvarianten ermöglicht.
1500N Clamp With Hook, Horizontal Base, Stainless Steel, 2000N Holding Force, 45mm Thread Length - Kukamet
Take advantage of the stainless-steel construction, compact horizontal-foot mounting and up to 2,000 N holding force for secure, repeatable clamping in production environments; order the Closure Toggle Clamp 351 directly via Metav Werkzeuge or ask our consultants if needed. Closure Toggle Clamp 351 – Stainless-steel latch clamp with hook (Kukamet) A Closure Toggle Clamp 351 for horizontal mounting that secures workpieces with a robust lever latch and is suitable for fixtures, jigs and assembly stations. Stainless-steel construction Horizontal-foot mounting 2000 N maximum holding force Hook-equipped lever latch Secure clamping for reliable production flow The 351 is a compact toggle clamp engineered for consistent retention and quick operation in repetitive tasks. With a rated holding force of 2,000 N and a separate clamping force specification of 1,500 N, the device delivers predictable performance for assembly and fixture work. The lever latch design converts operator motion into steady pressure, reducing rework and minimising process variation. This translates into measurable time savings where repeatability matters most. Built to last in workshop conditions Constructed from stainless steel, the latch offers corrosion resistance and mechanical resilience compared with standard plated components. The material choice supports long service intervals and lower maintenance needs in humid or mildly corrosive environments, which keeps downtimes to a minimum. The robust build ensures the clamp maintains alignment and clamping behaviour under frequent cycles, supporting lean production and quality control regimes. Quick installation and adjustment for diverse set-ups The clamp features a horizontal foot for straightforward bolting to fixture plates and tooling bases; the threaded spindle with 45 mm thread length permits fine adjustment of clamp reach and bite. The hook-equipped latch allows rapid engagement with compatible catches or plates, providing a secure closure without complex alignment. This adaptability makes the unit suitable for small-batch fixtures as well as integration into larger assembly jigs. Practical suitability across common applications Designed as a lever-operated closure, the product is ideal for holding panels, moulded parts and machined components during joining, testing or manual operations. The compact footprint supports dense fixture layouts and the repeatable action assists automated workstations where manual intervention is occasional. For projects demanding a corrosion-resistant, easy-to-adjust latch with reliable retention, this clamp offers a straightforward solution. Contact Metav Werkzeuge today to secure Kukamet’s reliable latch technology for your fixtures — Metav Werkzeuge GmbH in Emmerich provides fast delivery and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S351-2 Model: 351 GTIN: 8680731506723 Manufacturer: Kukamet Numbers / Core technical data Weight: 0.175 kg Maximum holding force: 2000 N Maximum clamping force: 1500 N Thread length: 45 mm Designs / Special features Material: stainless steel Mounting: horizontal foot Hook-equipped lever latch Lever toggle (hebelspanner) mechanism FAQ What maximum holding and clamping forces does the clamp provide? The Closure Toggle Clamp 351 is specified with a maximum holding force of 2,000 N and a maximum clamping force of 1,500 N, giving clear guidance for fixture design and load calculations. Is the clamp suitable for corrosion-prone environments? Yes, the Kukamet latch is made from stainless steel, which provides enhanced resistance to corrosion compared with standard steel finishes and is therefore suitable for many workshop and light industrial environments. How is the clamp mounted and adjusted on a fixture? The unit uses a horizontal-foot mounting arrangement and a threaded spindle with 45 mm thread length for adjustment, allowing secure bolting and fine setting of clamp engagement depth. Can the hook-equipped latch be used with custom catches? The hook design allows simple engagement with compatible catches or plates; pairing with a suitably sized catch ensures secure closure and repeatable retention. Which applications are best matched to this type of latch? This lever-operated latch is well suited to jigs, fixtures, assembly stations and testing setups where reliable, repeatable holding is required without complex actuation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Horizontal Foot Clamp With Hook, 45mm Thread Length, Zinc Plated - Kukamet
Take advantage of the combination of reliable clamping performance, compact zinc-plated durability and straightforward mounting for efficient jig and fixture setups. Order the clamp directly via Metav Werkzeuge or contact our consultants for matching mounting advice. Toggle clamp 331 — horizontal-base toggle clamp, zinc-plated (Kukamet) The Toggle clamp 331 secures workpieces using a horizontal base and a lever-action mechanism, offering a pressing force of 1,500 N and a holding capability up to 2,000 N for jigs, fixtures and light production tasks. Horizontal base for secure mounting Pressing force 1,500 N Holding force up to 2,000 N Zinc-plated corrosion protection Faster, more secure workholding for repetitive tasks The lever-style mechanism delivers a consistent and repeatable clamping motion that speeds up cycle times in assembly and fixturing. With a pressing force of 1,500 N and a holding force of 2,000 N, the clamp provides the necessary restraint for common workshop operations without complex adjustment. The toggle action converts a short handle travel into a strong clamping force, reducing operator fatigue and ensuring that tolerances are maintained across repeated operations. This reliability supports leaner workflows and fewer rechecks during multi-part assemblies. Built to resist the workshop environment while staying compact A zinc-plated finish provides basic corrosion resistance for use in standard workshop environments, making the clamp suitable for both woodworking and light metalwork applications. The compact construction and lightweight 0.16 kg design allow integration into small fixtures and portable jigs where space is limited. The horizontal base simplifies mounting on flat plates or fixture blocks, while the integrated hook offers secure engagement with mating components. These characteristics combine to give dependable service life with minimal footprint. Practical installation and clear technical fitment Installation requires a horizontal mounting surface and standard fastening through the base; the clamp features a thread length of 45 mm, which accommodates typical fixture thicknesses and adjustable linkages. The lever mechanism is straightforward to align and hooks to the mating catch without precision shims, which keeps setup time low. For specialised applications, the compact profile and robust clamping values mean the device can be specified where a repeatable, manual locking action is required in assembly, testing or holding operations. Request tailored mounting and compatibility advice from Metav Werkzeuge — our Emmerich team can confirm technical fitment and availability by email or phone Technical data SKU: 331-2 GTIN: 8680731506020 eClass: 21041718 ETIM: EC011973 Facts Weight: 0.16 kg Pressing force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Special features Material: zinc-plated Mounting: horizontal foot With hook Lever / toggle-style clamp FAQ What clamping force can be expected from this clamp? The clamp provides a pressing force of 1,500 N and a holding capability up to 2,000 N; the Toggle clamp 331 (Kukamet, SKU 331-2) is specified for these load conditions. Is the finish suitable for humid workshop conditions? The zinc-plated finish offers basic corrosion protection for standard workshop environments; for aggressive or marine conditions, consider additional surface protection beyond the clamp’s standard plating. Can the clamp be mounted to thin fixture plates? Yes. The horizontal base is designed for flat-plate mounting and the thread length of 45 mm accommodates common fixture thicknesses and linkage adjustments. Is this clamp suitable for metalworking and woodworking fixtures? The clamp’s lever action and rated forces make it suitable for both woodworking and light metalworking jigs where manual, repeatable clamping is required. What elements should be checked during installation? Check base flatness, thread engagement (45 mm available), and mating catch alignment to ensure full engagement of the hook and proper toggle lock of the mechanism. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Push Rod Clamp 12mm Piston Diam, Horizontal Foot, Zinc-Plated Cast Body - Kukamet
The combination of zinc-plated cast construction, a 1,500 N clamping capacity and a compact, low-mass design ensures secure, repeatable workholding with minimal fixture space; order the clamp directly via Metav Werkzeuge or consult the advisors for application support. 535 Pushrod clamp by Kukamet — 1,500 N clamping force, horizontal-foot The 535 is a compact pushrod clamp designed for fixture and jig workholding where a horizontal-foot mounting and reliable, repeatable clamping are required. Zinc-plated cast body for corrosion resistance 1,500 N maximum clamping force Horizontal-foot mounting for simple fixture integration Compact weight 0.63 kg for space-saving layouts Robust clamping that keeps production moving The unit combines a zinc-plated exterior with a cast body to resist workshop wear while maintaining stable contact pressure. With a 1,500 N maximum clamping force and a 1,700 N holding force the device secures workpieces reliably during machining and assembly. The internal 12 mm piston converts lever action into linear force with minimal backlash, providing consistently repeatable positioning in batch production or single-item fixturing. These mechanical characteristics translate into fewer reworks and a steadier process flow. Easy integration into existing fixtures and jigs Designed with a horizontal foot for mounting, the clamp fits standard fixture plates and tooling setups without complex adapters. The clamping spindle is specified as an M8x50 spindle, allowing rapid replacement or adjustment within the fixture. At 0.63 kg the component adds minimal mass to movable subassemblies, which benefits automated handling and reduces inertial load on indexers. The simple pushrod principle of this clamp supports rapid cycle times and straightforward maintenance, making it suitable for repetitive assembly and light machining operations. Durable, practical choice for everyday workshop use Manufactured by Kukamet, the unit is engineered for long service life under workshop conditions. The combination of a sturdy cast housing and corrosion-resistant finish reduces downtime for replacement, while the compact form factor supports dense fixture layouts in tool rooms and production cells. The SKU: 535-3-Q12-L identifies this configuration for procurement and spare-part planning. For customers seeking a reliable mechanical clamp that balances holding power and footprint, this clamp represents a pragmatic solution that minimises complexity in fixture design. Speak with Metav Werkzeuge for tailored advice on fitting the Kukamet 535 into production fixtures — email info@metav-werkzeuge.com or call +49 2822 7131930 for application guidance. Technical data SKU: 535-3-Q12-L GTIN: 8682843521229 ECLASS: 21041716 ETIM: EC011973 Core data Maximum clamping force: 1,500 N Maximum holding force: 1,700 N Piston diameter: 12 mm Spindle thread/length: M8x50 Weight: 0.63 kg Special features Material: zinc-plated with cast body Mounting: horizontal foot Application type: pushrod / lever clamp FAQ What is the maximum clamping force of this clamp? The Kukamet 535 pushrod clamp delivers a maximum clamping force of 1,500 N and a holding force of 1,700 N. Which mounting style does the clamp use? The unit features a horizontal-foot mounting designed for direct attachment to fixture plates and jig bases. What spindle and piston dimensions are specified? The clamp uses an M8x50 spindle and a 12 mm piston diameter for reliable force transmission. Is the clamp suitable for frequent use in a production environment? Yes, the Kukamet 535 is built with a zinc-plated cast body for durability and a compact form that supports repeated cycles in production settings. How can the SKU be used for ordering or spare parts? Reference SKU: 535-3-Q12-L when ordering the exact configuration or when planning replacement components. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Toggle Clamp Horizontal Foot With Hook, Stainless Steel, 1725N Holding Force - Kukamet
Take advantage of a compact, corrosion-resistant latch that combines reliable holding performance with simple horizontal mounting for fast fixture integration. Order directly via Metav Werkzeuge or ask their consultants for specification support. Latch clamp 363 – stainless steel toggle latch with hook, horizontal foot mounting by Kukamet The Latch clamp 363 is a stainless steel toggle latch designed for secure, repeatable fastening in jigs, fixtures and assembly applications where a horizontal-foot mount and positive-hook engagement are required Stainless steel construction Horizontal foot mounting Built-in hook for positive engagement Holding force up to 1,725 N Robust material and corrosion resistance for demanding environments Made from stainless steel, this toggle latch delivers long-term resistance to corrosion and wear, reducing maintenance intervals and downtime. The metal construction ensures consistent clamping behaviour under frequent cycling, while the compact design keeps the footprint minimal. A corrosion-resistant finish supports use in workshop and light industrial environments, providing a reliable fastening point where repeatability is essential. The combination of material and build quality yields a durable clamp that maintains alignment and preload over many cycles. Clear mechanical performance for precise fixture design The latch offers distinct mechanical values: a pressing force rated at 1,500 N and a holding force of 1,725 N, which allows engineers to dimension jigs and assemblies with confidence. The difference between pressing and holding forces should be considered when designing closures: the pressing value indicates achievable closure power, while the holding value expresses static retention under load. The integrated hook secures the mating plate positively, preventing unintended release and ensuring safe operation in automated or manual production processes. Fast mounting and compact operation to streamline workflows A horizontal-foot mounting plate enables straightforward installation on flat surfaces or fixture bases, simplifying retrofits and new equipment builds. At approximately 0.05 kg, the clamp is lightweight yet robust, making it suitable for portable fixtures and movable fixtures inside production cells. The latch mechanism operates with simple lever action for quick open/close cycles, supporting efficient takt times on assembly lines. Specifying a compact toggle latch like this reduces spatial requirements while maintaining secure closure, which benefits lean manufacturing and dense tooling layouts. For procurement or application advice on Kukamet stainless-steel latch clamps, contact Metav Werkzeuge for direct ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s specialists will assist with compatibility and integration into existing fixtures Technical data SKU: S363-2 GTIN: 8680731509588 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Core specifications Max pressing force: 1,500 N Max holding force: 1,725 N Weight: 0.05 kg Design & features Material: stainless steel Mounting: horizontal foot With hook Product type: latch clamp (toggle latch) FAQ What material is used for this latch clamp and how does that affect corrosion resistance? The latch clamp 363 is manufactured from stainless steel, which provides enhanced resistance to corrosion and a longer service life in humid or mildly aggressive workshop atmospheres. What are the rated forces and how should they be used in fixture design? Rated values are 1,500 N pressing force and 1,725 N holding force; use the pressing force to assess closure capability and the holding force to determine static retention under load. How is the clamp mounted and where is it most suitable to be installed? The clamp uses a horizontal foot mounting, making it suitable for installation on flat fixture bases, jigs and assembly plates where a low-profile latch is required. Does the latch include a positive locking feature? Yes, the integrated hook ensures positive engagement when closed, improving safety and preventing unintended release during handling or vibration. Is the latch suitable for portable or lightweight fixtures? At approximately 0.05 kg the latch is lightweight and well suited to portable fixtures or applications where low mass is desirable without compromising holding performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Base Latch Clamp With Hook, 45mm Thread Length, 0.16kg - Kukamet
Take advantage of the combination of robust holding performance, a compact and lightweight design, and straightforward vertical-foot installation for reliable fixture clamping. Order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 332 — vertical-foot toggle latch clamp with hook by Kukamet The Latch clamp 332 is a compact vertical-foot toggle latch clamp intended for secure fastening in jigs, fixtures and access panels across metalworking and general workshop applications. Vertical foot for flush mounting Holding force up to 2,000 N Compact and lightweight at 160 g Blackened finish for corrosion resistance High-performance holding for demanding fixtures The clamp delivers a holding force of up to 2,000 N combined with a clamping force rated at 1,500 N, providing measurable reliability where repeatable retention is required. These figures translate into consistent clamp behaviour under cyclical loads, reducing rework and downtime in production environments. The specified forces are useful reference values when replacing or specifying clamps for pallets, jigs or enclosure doors, and they support rational decision-making when selecting hardware for load-critical fixtures. Durable construction with corrosion-resistant finish Constructed with a blackened finish, the component offers enhanced surface protection while maintaining a discreet appearance in industrial settings. The integral hook and a threaded engagement of 45 mm length enable secure latch engagement and straightforward adjustment. At just 0.16 kg, the assembly adds minimal mass to moving fixtures, which benefits indexing systems and portable tooling where low inertia is preferred. The materials and surface treatment together balance durability with the ease of retrofitting into existing assemblies. Easy integration and service-friendly adjustment Designed for mounting on a vertical foot, the clamp allows flush installation on panels and plates, saving space on workbenches and fixture bases. The lever-style actuation provides quick manual operation with clear tactile feedback, while the threaded section permits fine preload adjustment without specialised tools. Routine checks are limited to visual inspection and re-tensioning if required, keeping maintenance intervals short and predictable — an advantage for busy workshop schedules and lean production lines. Proven partner for consistent supply and support Specified by professionals in clamping technology, this latch clamp is suitable for small-batch fixtures as well as larger assembly lines where dependable repeatability matters. Sourcing through an experienced distributor ensures traceability and continuity of supply; Metav’s position as a precision partner combines extensive product range with a quality filter for the European market. The result is predictable availability alongside the technical data needed to integrate the clamp into engineering documentation. For secure fixture assembly choose Kukamet quality — contact Metav Werkzeuge for tailored advice and reliable supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B332-2 GTIN: 8680731508468 eClass: 21041718 ETIM: EC011973 Core specifications Clamping force: 1,500 N Holding force: 2,000 N Weight: 0.16 kg Thread length: 45 mm Features & materials Vertical foot mounting With hook Blackened finish Category: Clamps SKU: B332-2 FAQ What maximum load can the clamp sustain? The clamp offers a holding force of up to 2,000 N and a clamping force of 1,500 N, figures that indicate suitability for most fixture retention tasks with moderate dynamic loads. Is the clamp suitable for outdoor or humid environments? The blackened finish provides improved surface protection; however, for prolonged outdoor exposure additional corrosion protection may be recommended depending on the specific environmental conditions. How is the clamp mounted and adjusted? Mounting is performed via the vertical foot and adjustment is achieved through the 45 mm threaded engagement, allowing precise preload setting without special tools. Can the latch be used on portable fixtures or jigs? Yes — the lightweight construction at approximately 0.16 kg and compact footprint make it well suited to portable fixtures and moveable tooling where low mass is important. Which SKU and manufacturer reference should be quoted when ordering? Please refer to SKU B332-2 from Kukamet when ordering or enquiring about this toggle latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Base Toggle Clamp With Safety Lock, 45mm Thread Length, Stainless Steel - Kukamet
Compact stainless construction, secure hook closure and a positive safety lock give reliable fixture performance up to 2000 N holding force; lightweight design eases integration into existing jigs. Use the robust latch for repetitive clamping tasks and order directly via Metav Werkzeuge or consult our specialists for tailored advice. Latch clamp 312 (S312-2-L) – stainless steel latch clamp with safety lock by Kukamet Latch clamp 312 offers a compact locking closure for vertical-foot mounting, combining corrosion-resistant construction with a hook closure and integrated safety locking for repeatable clamping. Stainless steel construction Vertical-foot mounting Integrated safety locking mechanism Hook-equipped for secure closure Corrosion-resistant durability that fits tight spaces Made from stainless steel, this compact closure delivers corrosion resistance and consistent performance in workshop environments. The light overall mass of 0.175 kg reduces the load on fixtures while keeping the component simple to handle during assembly. Because the housing resists common workshop contaminants, service intervals are reduced and long-term reliability is improved. The combination of a robust material and compact footprint supports compact jig design without sacrificing durability. High holding and pressing forces for dependable clamping Designed for demanding repetitive operations, the device provides a pressing force of 1500 N and a holding force of 2000 N, giving a clear safety margin between actuation load and static retention. This separation of values allows secure closure under vibration and machining loads while keeping actuation effort manageable. The mechanical behaviour ensures repeatable positioning and reliable part retention, which translates into fewer stoppages and more consistent production output. Easy mounting and secure operation for everyday workflows The vertical-foot design enables straightforward installation on flat fixture plates and tooling blocks; the thread length 45 mm permits fine height adjustment for precise part alignment. A hook-equipped closure point ensures a positive engagement; the integrated safety lock prevents accidental release during handling or machining operations. The compact lever action makes manual operation quick, while the locking feature supports safe transport and handling of clamped assemblies. Why this latch supports efficient sourcing and long-term supply As part of Kukamet’s range, the unit is engineered for industrial use and built to integrate with standard tooling. Sourcing via Metav Werkzeuge brings the added assurance of an experienced European distribution partner: a wide product range, structured quality checks at the Emmerich hub and a proven delivery process that supports ongoing production needs. This supply chain transparency reduces procurement risk and helps maintain uninterrupted workshop throughput. Contact Metav Werkzeuge for expert advice on integrating the Kukamet latch clamp S312-2-L with safety lock into existing jigs and fixtures, or to request compatibility information for specific applications Technical data SKU: S312-2-L GTIN: 8680731509403 Brand: Kukamet Material: Stainless steel Category: Spanner Facts Weight: 0.175 kg Pressing force (max): 1500 N Holding force (max): 2000 N Thread length: 45 mm Special features Vertical-foot mounting Integrated safety lock Hook-equipped closure Lever-type latch action Compact, corrosion-resistant design FAQ What materials is this latch best suited for? The Kukamet latch clamp S312-2-L is manufactured from stainless steel and is suitable as a fixture element in general workshop and industrial environments where corrosion resistance and mechanical durability are required. What holding and actuation forces can be expected? The latch provides a pressing force of 1500 N and a holding force of 2000 N, giving secure retention for a wide range of repetitive clamping tasks. How is the device mounted and adjusted? Mounting is via the vertical foot; the device features a threaded spindle with a 45 mm thread length for height adjustment and accurate positioning on fixture plates. Does the clamp include safety features to prevent accidental opening? Yes, the S312-2-L includes an integrated safety locking mechanism and a hook closure to reduce the risk of accidental release during handling or machining. What are the identifying details for ordering and stock checks? Ordering reference: SKU S312-2-L; GTIN 8680731509403; product type: Kukamet latch clamp 312 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Clamp With 5000N Holding Arm, Safety Lock, 100° Angle - Kukamet
Take advantage of the robust 5,000 N holding arm, the integrated safety lock and a compact horizontal foot for stable mounting — a combination that secures workpieces reliably while keeping setup time short. Order directly via Metav Werkzeuge or contact our advisors for fixture planning and integration advice. Vertical toggle clamp 221 by Kukamet — 5,000 N holding arm, 1,500 N clamping force The Vertical toggle clamp 221 is a compact vertical clamping solution designed for fixtures and jigs where high holding force and secure locking are essential for repeatable production. Robust holding arm with 5,000 N force Integrated safety lock for secure clamping Horizontal foot for stable mounting Clamping force up to 1,500 N Consistent clamping for reliable production The clamp delivers high holding performance through a dedicated holding arm rated at 5,000 N, combined with a maximum clamping force of 1,500 N, which reduces the risk of workpiece movement during machining or assembly. The integrated safety lock prevents unintended release of the lever, lowering the likelihood of set-up errors and scrap. These measured performance values translate directly into fewer interruptions on the shop floor and improved process reliability for small-batch and medium-volume workflows. Compact integration reduces setup time Designed with a horizontal foot for simple installation, the device fits into standard fixture plates and modular jigs without demanding additional mounting complexity. The body features a black oxide finish that gives basic corrosion resistance while maintaining a low visual impact in production cells. With a compact mass of 1.31 kg and a working angle of 100°, the clamp allows close-packed arrangements on pallets and reduces interference with neighbouring tools, enhancing layout flexibility and faster changeovers. Suitable for diverse fixtures and practical workbenches This toggle-style clamp is engineered for workshops, subassembly lines and engineering labs that require dependable vertical clamping in a modest footprint. The lever mechanism, inspired by classic toggle clamps, ensures positive force transmission and simple manual operation, helping operators position and secure parts swiftly. Sourcing through Metav Werkzeuge gives access to consistent stock levels and technical advice from a partner experienced in supplying precision tools and fixture elements for industry and trade. Contact Metav Werkzeuge today to discuss fixture compatibility, request the SKU 221-4-C-L for order processing or obtain tailored advice by phone or e‑mail: +49 2822 7131930 / info@metav-werkzeuge.com Technical data Article number: 221-4-C-L GTIN: 8682843520390 EClass: 21041717 ETIM: EC011973 Facts Clamping force: 1,500 N Holding force: 5,000 N Weight: 1.31 kg Working angle: 100° Special features Mounting type: horizontal foot Safety lock: integrated Finish: black oxide Product type: vertical toggle clamp FAQ What is the maximum holding force of this clamp? The clamp offers a holding arm rated at 5,000 N and a clamping force up to 1,500 N for secure fixation. Is the safety lock suitable for automated cells? The integrated safety lock on the Vertical toggle clamp 221 secures the lever mechanically; for full automation, assess integration with safeguarding and control systems. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot; the design allows bolting to standard fixture plates and modular bases for stable installation. What finish does the device have and how does it perform in shop environments? The clamp comes with a black oxide finish that offers basic corrosion protection and a discreet appearance suited to workshop use. Which SKU should be referenced when ordering or requesting data sheets? Use SKU 221-4-C-L for ordering, stock checks and when requesting detailed documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1500N Vertical Foot Clamping Toggle Clamp With Safety Latch, Black Oxide Finish - Kukamet
Compact, safe clamping with measurable performance: the combination of a 2,000 N holding force, a 1,500 N clamping capacity and a secure safety lock makes this latch clamp a dependable choice for repetitive fixtures and jigs. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice and delivery from Emmerich. Kukamet B312-2-L Toggle Latch Clamp 312 — Vertical Foot, Safety Lock Toggle Latch Clamp 312 (B312-2-L) is a compact industrial latch clamp for fast, repeatable securing in fixtures, jigs and small assembly stations. Vertical-foot mounting for stable installation Safety lock for secure clamping Holding force up to 2,000 N Blackened finish for corrosion resistance Maintain consistent production with reliable clamping power The latch provides a measurable combination of clamping and holding performance, delivering a clamping force of 1,500 N and a holding force up to 2,000 N for demanding repeat operations. These figures enable predictable fixture behaviour and reduce setup variation, which supports throughput and lower rework rates. The mechanical design translates force efficiently, meaning less operator effort during closing and a consistent result across cycles. Safer, faster operation thanks to an integrated safety mechanism An integrated safety lock prevents accidental release during processing, adding a layer of protection for both workpieces and operators. The vertical-foot mounting ensures the clamp remains rigid under load, improving positional stability in welded or bolted jig assemblies. The latch action is quick to engage and release, improving cycle times while keeping handling straightforward for workshop staff. Space-saving mounting and simple integration into fixtures With a compact mass of 0.175 kg and a thread length of 45 mm, the clamp fits tight installation envelopes and adapts to common fixture plates and frames. The built-in hook simplifies latching onto mating parts or anchors and supports versatile alignment options. Its low profile reduces interference with adjacent tooling and helps maintain clear access for assembly or measurement tasks. Durable finish and construction for workshop environments Finished in a blackened treatment, the clamp resists surface wear and offers improved corrosion protection in everyday industrial atmospheres. The robust mechanical components are designed for repetitive cycles, making this latch suitable for production lines, welding fixtures and general-purpose jigs. Where longevity and predictable performance are priorities, this clamp provides a practical, low-maintenance solution. Contact Metav Werkzeuge to specify the Kukamet B312-2-L for production fixtures; our Emmerich-based team will advise on fitment and supply options at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B312-2-L GTIN: 8680731508338 Manufacturer: Kukamet SKU: B312-2-L Facts Weight: 0.175 kg Clamping force: 1,500 N Holding force: 2,000 N Thread length: 45 mm Eclass: 21041718 ETIM: EC011973 Special features Vertical-foot mounting Safety lock Blackened finish With hook Category: Spanner FAQ What applications is this latch clamp suited for? The Kukamet B312-2-L toggle latch clamp is suitable for fixtures, jigs and small assembly stations where repeatable clamping and fast actuation are required. How much load can the latch withstand during holding? Rated holding force for the product is 2,000 N, providing secure retention for typical workshop and light industrial applications. Does the clamp include any anti-release feature? Yes — the clamp comes with an integrated safety lock to prevent unintended opening under load. What mounting style does the clamp use? This model uses a vertical foot mounting arrangement, offering a stable base for bolted or welded fixture installation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com