Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
150mm Closure Clamp Horizontal Foot, 1.5 kN Clamping Force, Galvanised - Kukamet
The galvanised construction, horizontal mounting foot and 1,500 N clamping force combine to deliver a reliable, low-maintenance closure solution for repetitive workshop and light industrial use. Order the closure latch clamp 363 directly via Metav Werkzeuge or contact our consultants for specification support and prompt dispatch from Emmerich. Closure latch clamp 363 — Galvanised hook latch clamp by Kukamet, horizontal base Closure latch clamp 363 is a compact, hook-equipped latch designed for secure closures in fixtures, jigs and light production assemblies where a sturdy, repeatable hold is required Galvanised finish for corrosion resistance Horizontal base for flush mounting Hook-equipped latch for secure holding 1,500 N clamping force, 1,725 N holding force Consistent clamping performance for repetitive tasks The latch offers consistent clamping through a maximum clamping capacity of 1,500 N, backed by a holding force rated at 1,725 N. This ensures repeatable closure behaviour when used in fixtures and assembly stations, reducing rework and downtime. The specified forces are measured peak values; the mechanical design converts lever movement into reliable pressure at the hook, which is particularly important for operations that require steady retention rather than continuous heavy loading. The compact design keeps mass low while maintaining structural rigidity. Robust finish and simple mounting reduce lifecycle costs Constructed from galvanised steel, the unit resists corrosion in workshop environments and is suitable for periodic cleaning without losing function. The horizontal base enables flush installation on benches and plates, saving space and simplifying jig layout. Mounting takes place via standard fastenings to the horizontal foot, allowing quick integration into existing fixtures. The corrosion-resistant finish and uncomplicated mounting lower maintenance needs and contribute to a longer service life compared with uncoated alternatives. Practical applications and compatibility explained This latch is intended for use in light industrial clamping, jigs, doors and access panels where a hook-equipped closure is advantageous. It is not a primary structural fastener but serves to lock or secure components during handling, transport or light machining setups. The unit’s low weight and compact footprint make it easy to incorporate into manual and semi-automatic stations. For applications requiring continuous heavy clamping or vibration-prone environments, consideration of additional securing methods is advised. Safe use and maintenance guidance Regular inspection of the latch mechanism and mounting points preserves performance: check the hook engagement, fasteners and the galvanised surface for damage or excessive wear. Simple lubrication of pivot points maintains smooth action and avoids stickiness that could impair clamp cycle reliability. If replacement parts are required, refer to the catalogue PDF for component references and ensure replacement parts match the original specifications to retain the rated 1,500 N clamping and 1,725 N holding capacities. For a dependable, compact closure solution from Kukamet, request the closure latch clamp 363 via Metav Werkzeuge — technical advice and dispatch are available from Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 363-2 GTIN: 8680731504620 ECLASS: 21041718 ETIM: EC011973 Name: Closure latch clamp 363 Manufacturer: Kukamet Facts Clamping force (max): 1500 N Holding force (max): 1725 N Weight: 0.05 kg Mounting: horizontal base Special features Material: galvanised Hook-equipped Horizontal base for flush mounting PDF catalogue available FAQ What is the maximum clamping force of this latch? The closure latch clamp 363 provides a maximum clamping force of 1,500 N and a holding force of 1,725 N, suitable for repeatable securing tasks in fixtures and jigs. Can the latch be mounted flush to a workbench or plate? Yes. The unit features a horizontal base for flush mounting, enabling compact installation in benches and fixture plates. Is the surface protected against corrosion? The latch is galvanised, giving a corrosion-resistant surface that is suitable for typical workshop environments and periodic cleaning. Does the latch include a hook for positive engagement? Yes, the product is hook-equipped to ensure positive mechanical engagement and reliable retention during handling or light processing. What maintenance is recommended to keep the latch reliable? Periodic inspection of pivot points and fastenings, light lubrication of moving parts and checks for wear on the hook and mounting area will preserve the latch’s performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Closure Clamp Nr.6848H Horizontal With Counter Holder, Clamping Force 3200 N - AMF
Combining a maximum holding force of 3,200 N with a wide clamping range (B: 53.5–101 mm) and a horizontal layout with an integral counterholder, this locking clamp delivers secure, repeatable workholding for fixtures and jigs. Order the locking clamp directly via Metav Werkzeuge or consult the technical advisors if required. AMF 6848H Horizontal Locking Clamp, Size 3 The AMF 6848H is a horizontal locking clamp with an integrated counterholder, designed for secure fixture clamping and repeatable positioning in industrial production. Horizontal design with integral counterholder Wide clamping range B: 53.5–101 mm Max holding force 3,200 N Adjustable spindle M: 24.5–32.0 mm Secure, repeatable clamping for efficient production The horizontal locking device offers a high holding force of 3,200 N, ensuring components remain firmly fixed during machining or assembly. The combination of substantial clamping power and a wide clamping range (B from 53.5 mm to 101 mm) reduces the need for multiple clamp sizes and cuts changeover time. In practical terms, the listed values indicate the usable span for workpiece thickness and the clamp’s capability to resist displacement under process loads, delivering predictable and repeatable results on the shop floor. Fast setup and precise adjustment to reduce downtime Adjustment features such as the adjustable spindle (M: 24.5–32.0 mm) and the variable jaw positions allow quick fine-tuning during fixture setup. The clamp’s design supports straightforward alignment: L1 (169–216 mm) provides reach flexibility while H1 (70 mm) and H2 (135.5 mm) help integrate the unit into multi-clamp assemblies. These dimensional options promote efficient assembly of jigs, minimise rework and speed return to production following fixture changes. Robust horizontal layout that integrates into fixtures The horizontal layout with an integrated counterholder simplifies installation and ensures the clamping force is transmitted efficiently to the workpiece without unnecessary stress on surrounding components. Built to be incorporated into industrial fixtures, the unit’s compact profile and defined contact points support ergonomic tooling design and stable clamping cycles. The product is supplied as a complete item (packaging unit 1), enabling immediate integration into your tooling setup without additional components. For secure fixture clamping tailored to production workflows, request the AMF 6848H through Metav Werkzeuge’s specialist team in Emmerich; technical advisors are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4123682300NW Type: 6848H Product: Locking clamp Execution: horizontal; including counterholder Label: Locking clamp No. 6848H Size 3 horizontal AMF Packaging unit: 1 Facts Holding force, max: 3,200 N Clamping range B: 53.5–101 mm E range: 48.6–96 mm L1: 169–216 mm L5: 93 mm M (adjustment): 24.5–32.0 mm H: 19 mm H1: 70 mm H2: 135.5 mm C: 19 mm D: 6.5 mm D1: 6 mm F: 14 mm K: 8.0 mm N: 48 mm P: 35 mm Special features Horizontal design Includes counterholder Size: 3 Wide adjustable range for versatile use Suitable for fixture and jig integration FAQ What clamping range does the clamp cover? The AMF 6848H offers a clamping range B from 53.5–101 mm, with an E range of 48.6–96 mm and an adjustable spindle M of 24.5–32.0 mm for fine tuning. How much holding force is available? Maximum holding force is 3,200 N for the AMF 6848H, providing strong and reliable fixation for typical fixture duties. Is the counterholder supplied with the clamp? Yes — the horizontal version is supplied including the counterholder as stated in the execution data. Which dimensions are most important for fixture integration? Key dimensions for integration include L1 (169–216 mm) for reach, H1 (70 mm) and H2 (135.5 mm) for clearance, and the clamping range B for workpiece thickness compatibility; these values support layout planning for the AMF 6848H. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Closure Clamp Size 1 Horizontal Adjustable 8mm Travel Zinc Plated Passivated, 2000N Holding Force - AMF
Benefit from a combination of robust clamping, a zinc-plated, passivated finish and a compact horizontal form factor that secures fixtures reliably in confined assemblies — order the item directly via Metav Werkzeuge or consult our advisors for application support. AMF Locking Clamp No. 6847 (Size 1) — Horizontal, Zinc-Plated AMF Locking Clamp No. 6847 is a horizontal locking clamp intended for fixture and jig applications where secure, repeatable holding and corrosion resistance are required Compact horizontal design for tight fixtures Max. holding force 2,000 N Zinc-plated, passivated finish for corrosion protection Adjustable travel 8 mm for precise clamping Consistent holding for repeatable production The horizontal locking clamp delivers reliable clamping through a rated holding force of 2,000 N, which defines the maximum static pull the device resists before release. That measurable value provides a clear basis for fixture design and risk assessment in machining or assembly operations. The clamp’s mechanism converts manual actuation into steady, repeatable clamping that reduces part movement during processing, improving quality and reducing rework. Engineers benefit from knowing the exact performance parameter when integrating the component into repeatable production lines. Space-saving horizontal layout and fine adjustment Designed as a compact horizontal design, this clamp suits confined jigs and bespoke fixtures where vertical clearance is limited. The device features an adjustable travel 8 mm, enabling small positional corrections without altering the base plate. Key dimensional ranges such as B1 16–23 mm and B2 35–42 mm allow straightforward planning of mounting points and mating parts. Clear numeric specifications support CAD integration and ensure that the clamp fits existing tooling with minimal modification, helping to speed up setup and reduce fixture redesign time. Corrosion-resistant finish with straightforward installation Surface treatment is zinc-plated and passivated, offering enhanced resistance to rust in workshop environments and contributing to longer service life with low maintenance. The construction and finish reduce surface degradation from coolant and workshop humidity, preserving clamping accuracy over time. As a size-rated component (size 1), it integrates into standard modular fixture systems and pairs well with common fasteners and locating elements. The combination of finish and mechanical design results in a durable, low-maintenance clamping solution for metalworking and assembly tasks. For a tailored quotation or technical clarification on the AMF horizontal locking clamp — including drawing compatibility and delivery from Metav Werkzeuge in Emmerich — contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930; our consultants will advise on integration and supply. Technical data Article number: 4000833520NW Type: 6847 Product: Locking clamp No. 6847, size 1, horizontal Manufacturer: AMF Packaging unit: 1 Dimensions / Performance Max. holding force: 2,000 N Adjustable travel: 8 mm B1: 16–23 mm B2: 35–42 mm C: 19 mm D: 5.3 mm E1: 17–24 mm E2: 35–42 mm G: 4.5 mm H: 22.7 mm H1: 34.5 mm H2: 111 mm K: 6 mm L: 31 mm L1: 62.6 mm M: 26–30 mm N: 40 mm R: 4.5 mm S: 45 mm Finish / Special features Finish: zinc-plated, passivated Orientation: horizontal Size classification: 1 Suitable for fixture and jig integration FAQ What holding capacity does the clamp provide? The clamp offers a maximum holding force of 2,000 N, a figure used to assess static retention in fixture designs for machining and assembly. Is the clamp adjustable for different workpiece thicknesses? Yes, the device features an adjustable travel of 8 mm, allowing fine positional adjustment to accommodate small differences in part geometry. What surface protection is applied to the clamp? The component is zinc-plated and passivated, providing corrosion resistance suitable for workshop environments. Can this clamp be mounted in tight or low-clearance setups? The horizontal design and compact dimensions such as L1 62.6 mm and B1 16–23 mm support installation in confined fixtures and modular jig assemblies. Which SKU identifies this specific model? This unit is listed under SKU 4000833520NW and is supplied as Locking clamp No. 6847, size 1, horizontal by AMF. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Closure Clamp Type 6848V Vertical With Counterholder, Max Hold 7000 N - AMF
Take advantage of the combination of a 7,000 N holding force, an adjustable clamping range (43–81 mm) and vertical installation for reliable, repeatable fixture results; order the unit via Metav Werkzeuge or consult our advisors for integration support. AMF Vertical locking clamp No. 6848V, Size 4 — vertical execution with keeper, 7,000 N holding force The AMF Vertical locking clamp No. 6848V, Size 4 is a vertically mounted closure clamp designed for secure, repeatable holding in jigs and fixtures and is supplied complete with its keeper. Vertical mounting with included keeper High holding force 7,000 N Adjustable clamping range 43–81 mm Robust design for industrial fixtures Reliable holding for repeatable clamping operations The vertical closure unit delivers consistent clamping performance where repeatability matters. With a maximum holding force of 7,000 N, the device secures components during assembly and testing to reduce slippage and rework. The mechanism is optimised for stable contact pressure, translating the mechanical properties of the clamp into predictable, measurable results for production processes. This makes it particularly suitable for fixture-heavy assembly lines and machining jigs that demand reliable part retention. Flexible adjustment and clear specification for easy integration A clearly defined adjustable clamping range (B 43–81 mm) and a set of precise dimensional reference points (for example H1 94.5 mm and H2 168 mm) simplify integration into existing tooling. The clamp’s dimensional data, including E 9–47 mm and M 35.0–46.0 mm, supports straightforward planning of stroke, clearance and contact geometry, so engineers can calculate compatible guides, stops and mating plates. These specifications reduce adaptation time and facilitate predictable fitment in modular fixture systems. Installation advantages and maintenance-friendly design The vertical orientation and included keeper support a compact footprint and simple mechanical interface. The execution “vertical; includes keeper” lowers installation complexity and shortens set-up time on production benches. Supplied as a single unit, the clamp avoids the need for additional matching parts during initial assembly. Routine maintenance is limited to visual inspections and ensuring the keeper and clamping surfaces remain free of heavy contamination to preserve repeatable clamping performance over long service intervals. Practical applications and where this clamp adds value This closure clamp is tailored for industrial clamping technology where secure retention and fast actuation are priorities — for example assembly jigs, transfer lines and testing fixtures. The combination of vertical mounting, adjustability and robust construction allows flexible use across small-batch production and series manufacturing. If any specification details require verification for a specific application, Metav’s technical advisors are available to discuss compatibility and installation strategies so the clamp integrates seamlessly into the existing process flow. Contact Metav Werkzeuge in Emmerich for technical advice or to arrange procurement of the AMF vertical locking clamp — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 4123683400NW Type: 6848V Product: Vertical locking clamp (Verschlussspanner) Brand: AMF Execution: vertical, includes keeper Facts Holding force max: 7,000 N Size: 4 Clamping range B: 43–81 mm E range: 9–47 mm C: 32 mm D: 8.5 mm H1: 94.5 mm H2: 168 mm M: 35.0–46.0 mm L1: 151 mm N: 64.5 mm P: 53.5 mm Packaging unit: 1 Special features Vertical orientation; includes keeper Size 4 Supplied as a single unit Label: Verschlussspanner Nr.6848V Gr.4 vertikal AMF FAQ What is the maximum holding force of the clamp? The AMF Vertical locking clamp No. 6848V (Size 4) provides a maximum holding force of 7,000 N. What clamping range does the device cover? The closure clamp covers a clamping range B 43–81 mm, with E adjustable from 9–47 mm, enabling adaptation to a variety of workpiece thicknesses. Is a keeper included with the clamp? Yes — the unit is supplied vertically mounted and includes the keeper required for secure engagement. How is the clamp supplied and what is the packaging unit? The product is supplied as a single unit; packaging unit: 1. Which applications are suitable for this locking clamp? The clamp is intended for jigs, fixtures and assembly or test stations where repeatable clamping and high holding force are required. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Collet Chuck ER25 1-16mm Clamping Range Cylindrical Shank 42mm - TECWERK
Benefit from a compact solution that combines a wide clamping range (1–16 mm) and a stable 42 mm body with a cylindrical shank for reliable toolholding; the construction supports DIN 6499 collets and keeps changeover times low. Order the ER collet chuck directly via Metav Werkzeuge or consult our specialists if further adaptation is required. TECWERK ER25 Collet Chuck – Clamping Range 1–16 mm, 20 mm Shank The TECWERK ER25 collet chuck for secure clamping of tools with cylindrical shanks in ER collets, suitable for workshop and light industrial toolholding applications. ER 25 collet system compatibility Clamping range 1–16 mm Cylindrical shank with lateral clamping face 42 mm body diameter for stable mounting Consistent clamping for efficient production The ER collet chuck is engineered to provide repeatable clamping when changing tools frequently. With a clamping range of 1–16 mm and compatibility with the ER25 interface, the holder reduces downtime and supports predictable machining cycles. The cylindrical shank and lateral clamping surface contribute to axial stability, while adherence to DIN 6499 ensures compatibility with standard collets. This results in improved process reliability and fewer interruptions in daily workshop operations. Easy integration and practical handling on the shop floor Designed as a compact, straightforward toolholder, this collet chuck fits into existing setups without complex adaptations. The 20 mm shank suits common machine spindles and fixtures, and the 42 mm body diameter provides a steady seating in the spindle or arbor. Clear mechanical design lowers the learning curve for operators and simplifies routine tool changes, which helps to raise throughput and keeps handling consistent across different operators and shifts. Durable design meets standardised tooling requirements Built with a focus on mechanical integrity, the chuck’s geometry supports secure clamping of cylindrical-shank tools and long-term stability under load. Compatibility with standard ER collets to DIN 6499 makes the system flexible for a wide range of cutters and reamers. The robust body and lateral clamping face contribute to vibration dampening and consistent concentricity, which assists in maintaining surface finish and dimensional accuracy during repeated machining tasks. For a dependable ER25 solution from TECWERK, contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 2120620190NW SKU / UID: 2120620190NW Manufacturer: TECWERK Product type: ER collet chuck Collet interface: ER 25 Facts Body diameter: 42 mm Clamping range: 1–16 mm Shank diameter: 20 mm Special features Cylindrical shank design Lateral clamping face Suitable for clamping cylindrical-shank tools Compatible with DIN 6499 collets FAQ What collet system does this chuck use? The TECWERK ER25 collet chuck uses the ER25 collet system, compatible with standard ER collets to DIN 6499 for tools with cylindrical shanks. Which clamping range is covered by the holder? The holder supports a clamping range of 1–16 mm, enabling use with a broad set of small to medium shank tools in the ER25 range. Is the shank suitable for common spindles and arbors? Yes, the chuck features a 20 mm cylindrical shank, making the TECWERK ER25 collet chuck straightforward to integrate into many spindles and arbors used in workshops. Can this chuck be used for precision finishing operations? The design emphasises stability and concentricity; when paired with suitable ER collets, the TECWERK ER25 collet chuck supports finishing operations that require consistent tool runout and surface quality. What standards ensure compatibility with collets and tooling? Compatibility is based on DIN 6499 for ER collets, ensuring the chuck functions with standardised tooling kits and collet sets. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Collet Chuck with ER-16 Collets Set, SK-40-70L - Vertex
Combining a rigid SK-40 taper with an ER-16 collet system, the set delivers consistent clamping and shorter setup times for shop-floor machining. Benefit from the compact 2.3 kg construction and the complete collet set — order the V-751 directly via Metav Werkzeuge or consult our specialists for tailored application advice. V-751 Collet Chuck Set (SK-40-70L, ER-16) by Vertex The V-751 is a precision collet chuck set designed for machining centres with an SK-40 taper, supplied with ER-16 collets for versatile and repeatable tool clamping. SK-40-70L taper for secure spindle connection Includes ER-16 collets for wide clamping range Set format reduces changeover time Compact mass of 2.3 kg for stable handling Precision clamping for reliable production The collet chuck and included ER collet system provide a consistent clamping interface that minimises runout and supports repeatable machining results. The SK-40 taper is a widely adopted spindle standard that ensures a rigid connection between spindle and chuck, enhancing stability during cutting operations. By using an ER-style system, the chuck allows a single clamping solution to accommodate a range of tool shank diameters without frequent fixture changes, improving throughput and reducing the potential for manual error. Practical set configuration for workshop efficiency Arranged as a complete set with ER-16 collets, the system reduces setup complexity and keeps tooling management straightforward. The set format streamlines changeovers and helps maintain a concise inventory of clamping accessories on the bench. With a compact mass of 2.3 kg, the assembly is easy to handle during installation while contributing to a stable rotating assembly once mounted. This balance of convenience and robustness supports efficient workshop routines and predictable production cycles. Supported purchasing and trusted supply chain Sourcing the chuck through an experienced partner builds operational confidence: Metav combines decades of specialist knowledge with a broad product range and central European logistics. As a precision partner, Metav has established long-term trust across thousands of customers and operates from Emmerich as a quality gateway for the market. For technical clarification, Metav’s product specialists can advise on compatibility and integration to ensure the collet system meets the intended machining tasks. Contact Metav Werkzeuge for advice on the Vertex V-751 collet chuck set and arrange supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and delivery options Technical data Article number: V-751 GTIN: 4061905083617 Brand: Vertex Facts Weight: 2.3 kg Pieces per set: 10 Special features Taper: SK-40-70L Collet system: ER-16 Supplied as a set with ER collets FAQ Is the V-751 compatible with an SK-40 spindle? The V-751 collet chuck set uses an SK-40-70L taper and is intended for spindles accepting the SK-40 interface; verify spindle taper conformity before installation. Which collets are included in the set? The set is supplied with ER-16 collets, providing a flexible clamping range within the ER-16 system for varied shank diameters. How heavy is the complete assembly? The complete V-751 set has a mass of 2.3 kg, aiding safe handling and providing stable mass for rotary balance. Can the ER-16 system accommodate different tool shank sizes? ER-16 collets allow clamping of multiple shank diameters within the ER-16 range, enabling versatile tool usage without changing the chuck. What identifiers should be used when ordering? Order or reference the SKU V-751 and GTIN 4061905083617 when enquiring about the Vertex collet chuck set to ensure accurate handling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Collet Set with ER-32 Collets and MT-4 Taper, 6 Pieces - Vertex
Benefit from ER‑32 clamping accuracy combined with MT‑4 taper compatibility; this six‑piece collet set secures tools reliably and reduces setup time on compatible spindles. Order the set via Metav Werkzeuge or consult the technical team for specification support. Vertex V-429 ER-32 Collet Set with MT‑4 Collet Chuck A Vertex V-429 ER‑32 collet set supplied with an MT‑4 taper collet chuck, designed for dependable tool clamping in workshop and light production environments ER‑32 collet system MT‑4 taper shank compatibility Six‑piece precision collet set Robust 2.9 kg kit weight Consistent, repeatable clamping for precision work The ER‑32 collet system is engineered to provide consistent concentricity and secure clamping across a range of tool diameters. In practice, a well‑matched collet compresses evenly around the tool shank, reducing runout and improving surface finish and tool life. For workshops that demand reproducible results, the Vertex kit delivers a stable interface between tool and spindle, making processes such as milling, drilling and reaming more reliable. The technical simplicity of the system also reduces the need for frequent recalibration, supporting uninterrupted production sequences. Faster set‑ups through direct MT‑4 taper compatibility Fitted with an MT‑4 taper, the collet chuck in this set permits straightforward mounting to spindles and adaptors that accept Morse taper 4. The result is a streamlined changeover routine: machinists can install or remove the chuck without additional adapters, shortening machine downtime and improving throughput. Because the interface is a standard taper form, compatibility with legacy machines and common drilling or milling heads is enhanced, which supports flexible use across different workshop equipment without complex retooling. A compact kit built for everyday workshop demands Supplied as a six‑piece set, the kit provides a practical selection of collets together with the collet chuck, presented as a balanced package for general machining tasks. The overall kit weight of 2.9 kg indicates a robust, workshop‑ready assembly that withstands routine handling. The grouping of collets in a single set simplifies inventory management and ensures that a suitable clamping size is immediately available during changeovers. For maintenance and service departments, consolidated tooling sets reduce the number of individual purchases and simplify stock keeping. Versatile applications and clear compatibility This clamping set is suitable for conventional machining operations where an ER‑32 system is appropriate and an MT‑4 taper connection is required. Typical applications include toolholding for light milling, drilling and reaming tasks on compatible machines. The combination of a standard collet system with a common taper form provides broad machine compatibility while maintaining the precision benefits of collet clamping. For specific machine interfaces or uncommon spindle noses, verification of taper acceptance is recommended to ensure fit and function. For reliable ER‑32 clamping and MT‑4 taper compatibility in the workshop, contact Metav Werkzeuge to discuss the Vertex V‑429 set, arrange procurement or request technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: V-429 GTIN: 4061905095795 ECLASS: 21022190 Brand: Vertex Facts Weight: 2.9 kg Pieces per set: 6 Special features Collet system: ER‑32 Taper: MT‑4 (Morse taper) Set: collets with collet chuck FAQ What is included in the Vertex V‑429 set? The Vertex V‑429 collet set includes six ER‑32 collets and a collet chuck with an MT‑4 taper shank, supplied as a single kit for immediate workshop use. Is the collet chuck compatible with standard machine spindles? Compatibility depends on spindle acceptance of an MT‑4 taper; the Vertex V‑429 is compatible with machines that accept an MT‑4 Morse taper. Can the collets be used for both drilling and milling tasks? The ER‑32 collets in the Vertex V‑429 set are suitable for general toolholding tasks such as drilling and light milling where collet clamping is appropriate. How does the ER‑32 system affect runout and tool life? A properly fitted ER‑32 collet provides even radial compression and improved concentricity, which typically reduces runout and can extend tool life when compared with less precise clamping methods. Where to obtain further technical details about sizes and tolerances? For exact collet diameters, tolerances and compatibility details, Metav Werkzeuge can provide the specific technical data and advice for the Vertex V‑429 set. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Drawbar Pull Stud With Bore, ISO 7388-3 Form AD DIN 69872 Form A, SK50 Thread M24 - TECWERK
Take advantage of a hardened, standardised retention solution that ensures consistent clamping with steep‑taper toolholders and straightforward replacement logistics; the combination of proven ISO compatibility and measured heat treatment supports longer service life and predictable maintenance intervals. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Retention knob ISO 7388-3 Form AD for SK50 (with bore) — TECWERK A retention knob designed for SK50 steep‑taper toolholders, compliant with ISO 7388‑3 Form AD and DIN 69872 Form A, for secure spindle clamping in heavy‑duty machining Hardened to 58± HRC for wear resistance M24 thread, ground for repeatable seating Parallel ground and blued finish for corrosion protection ISO 7388‑3 Form AD compatible with DIN 69872 Form A Secure clamping for steep‑taper toolholders The retention knob fulfils the primary need for secure, repeatable clamping of toolholders with a steep taper according to DIN 69871. Fitted to an SK50 taper, the component transfers axial pull‑out force from the spindle drawbar to the toolholder body; this results in consistent seating and minimised run‑out during machining. Specified to ISO 7388‑3 Form AD (equivalent to DIN 69872 Form A), the part ensures interchangeability across compliant systems, reducing setup time and the risk of incompatibility when replacing worn or damaged knobs. Durable construction that reduces maintenance intervals Heat treatment to 58± HRC with a controlled case depth of 0.5–0.8 mm provides a hard wearing surface at the contact zones while retaining a tough core to resist impact loads. The thread is soft‑ground to DIN tolerances to preserve engagement accuracy, and the stem is parallel ground then brünniert (blued) to offer basic corrosion protection and smooth insertion. These manufacturing steps combine to reduce fretting and galling at the clamping interface, which in turn lowers the frequency of replacements and supports uninterrupted production cycles. Clear dimensional data for correct selection and fitting Key dimensions are measured and stated to help confirm suitability for specific toolholder assemblies: M24 thread, overall length L1 74 mm, shoulder length L2 34 mm, and diameters d1 28 mm, d2 21 mm, d3 25 mm, d4 11.5 mm. Such figures allow quick cross‑checking against machine and toolholder drawings so that the correct retention geometry is chosen on first attempt. The standardised form designation further assists procurement and inventory management by matching items to existing ISO and DIN references. Operational benefits that support workflow efficiency By specifying a component that is standardised, hardened and finish‑treated, workshops gain predictable service intervals and consistent clamping performance — two factors that contribute directly to process stability and quality output. The standard form and thread mean spares can be stocked without bespoke machining or fitting, shortening downtime when a replacement is required. Coupled with Metav’s distribution and quality‑filtering approach, the solution supports reliable supply and reduces administrative overhead for maintenance planners. For technical enquiries or to source TECWERK retention knobs directly, contact Metav Werkzeuge for application advice and reliable delivery from Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s precision‑focused team will recommend the best option for specific spindle and toolholder combinations Technical data Article number: 2000832701NW Label: Anzugsbolzen ISO 7388-3 Form AD SK50 m.Bohr.TECWERK Manufacturer: TECWERK Product type: Retention knob Numbers / Core technical data Thread: M24 L1: 74 mm L2: 34 mm d1: 28 mm d2: 21 mm d3: 25 mm d4: 11.5 mm Hardness: 58 ± HRC Case depth: 0.5–0.8 mm Standard: ISO 7388-3 Form AD (DIN 69872 Form A) Special features / Design For toolholders with steep taper per DIN 69871 Hardened in service for wear resistance Thread soft‑ground to DIN tolerances Parallel ground and blued finish Supplied with bore for fitting Compatible with SK50 taper assemblies FAQ What taper types is this retention knob compatible with? The retention knob is intended for SK50 steep‑taper toolholders and is designed for use where DIN 69871 tapers are specified; the ISO 7388‑3 Form AD geometry matches compliant systems. What does the heat treatment specification mean for service life? A hardness of 58± HRC with a case depth of 0.5–0.8 mm gives a hardened wearing surface while preserving a tough core, which improves resistance to wear and helps extend the interval between replacements of the retention knob. Can the M24 thread be used in all drawbar systems? The M24 thread and soft‑ground machining follow DIN practices for accurate engagement; compatibility depends on the spindle drawbar thread and the toolholder assembly — confirm the M24 specification against machine documentation. How does the ISO form designation affect interchangeability? The ISO 7388‑3 Form AD designation (corresponding to DIN 69872 Form A) guarantees a standard geometry so the retention knob can be replaced with the same form across machines and suppliers without custom adaptation. Are the dimensions suitable for inventory management? Yes — stated dimensions (L1, L2, d1–d4) allow direct cross‑reference with toolholder drawings and support standard spare‑parts stocking for maintenance planning. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm ER 32 Collet Set 18-Piece 3–20mm Clamping Range, 5 µm Runout Accuracy - TECWERK
Take advantage of precise clamping, broad diameter coverage and organised storage to keep machining runs reliable and efficient; order directly via Metav Werkzeuge or consult the Metav team for specification advice. TECWERK ER 32 Collet Set (470 E) — 3–20 mm range The TECWERK ER 32 Collet Set (470 E) is a compact clamping kit for general workshop milling and turning, offering precise concentricity across a broad diameter range Precise runout & repeatability 5 µm Comprehensive 18-piece range 3–20 mm Delivered in durable wooden base Designed for ER 32 collet chucks Keep spindle concentricity and tool life under control Consistent concentricity is a core factor in stable machining. The set delivers a documented runout and repeatability of 5 µm, which reduces vibration and improves surface finish on turned and milled parts. In practical terms, this level of accuracy helps maintain cutter geometry and extends tool life, while also reducing rework rates on precision components. For workshops aiming to control tolerances without complex measuring protocols, the measurable concentricity performance provides an objective basis for process decisions. One set to cover common workshop diameters A single kit that covers a wide spectrum of sizes simplifies tooling logistics. The collets span 3–20 mm in single-millimetre steps, allowing uninterrupted operation across typical bar work and small component machining. By consolidating frequently used diameters into a complete set, machining centres and small workshops reduce changeover time and the need for ad hoc purchases. This practical coverage supports leaner inventory management and helps maintain throughput on mixed-production days. Robust presentation that protects precision Supplied in a wooden base, the collets remain protected and organised when not in use, which preserves the seating faces and prevents accidental knocks that can degrade accuracy. The compact footprint (150 x 30 x 190 mm) makes bench-top storage straightforward, while clear placement prevents lost items and speeds up tool changes. Maintaining an organised toolset contributes directly to uptime: less searching, fewer damaged collets and a tidier workbench mean faster setup and more consistent machining results. Compatibility and simple integration into existing toolrooms Designed for ER 32 systems, the set is compatible with ER 32 collet chucks and integrates seamlessly into standard spindle and toolholding arrangements. The kit supports common workshop operations in both milling and turning applications and is suitable for a wide range of ferrous and non-ferrous workpieces where ER 32 clamping is specified. For buyers seeking a pragmatic balance between accuracy and usability, this collet assortment offers a straightforward route to repeatable clamping without specialised fixtures or complex changeover procedures. For purchase enquiries or technical guidance on the TECWERK ER 32 Collet Set (470 E), contact Metav Werkzeuge for personalised advice and reliable supply from Emmerich Technical Data Article number: 2000832784NW Model: ER 32 (470 E) Product type: Collet set Manufacturer: TECWERK Dimensions: 150 x 30 x 190 mm Facts Clamping range: 3–20 mm Runout / Repeatability: 5 µm Content: 18 pieces Height: 30 mm Width: 150 mm Length: 190 mm Special features Delivered in wooden base Compatible with ER 32 collet chucks Sizes supplied: 3–20 mm (3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20) Packaging: wooden base FAQ What sizes are included in the set? The TECWERK ER 32 collet set (470 E) includes collets covering the range 3–20 mm in single-millimetre steps; the SKU is 2000832784NW. Is the set suitable for ER 32 chucks used in milling spindles? Yes, the set is designed for compatibility with ER 32 collet chucks and can be used in standard milling and turning toolholding applications. What accuracy can be expected from the collets? Measured runout and repeatability are specified at 5 µm, providing tight concentricity for precision machining tasks. How are the collets supplied and stored? The collets are supplied in a wooden base, which protects the clamping faces and keeps the set organised for the workshop. Can this set reduce tool change and setup times? By covering a broad diameter range in one kit and keeping sizes clearly arranged, the set helps to reduce changeover time and simplify setup procedures. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm ER Collet Chuck 1–7mm Clamping Range Cylindrical Shank 16mm - TECWERK
Take advantage of precise, repeatable clamping and a compact shank design for reliable small-tool machining; order the chuck via Metav Werkzeuge or consult the team for application advice. TECWERK ER collet chuck – 16 mm shank, 1–7 mm clamping range A TECWERK ER collet chuck designed to clamp cylindrical-shank tools securely in ER collets, suitable for general workshop and light production use ER 11 collet interface, DIN 6499 compatible Cylindrical shank D 16 mm, shank length 150 mm Clamping range 1–7 mm for small-diameter tools Precise clamping for repeatable machining outcomes The ER 11 interface in this collet chuck provides a high degree of concentricity, making it suitable for operations where runout and repeatability matter. With a clamping range of 1–7 mm, the chuck accommodates a wide selection of small drills, reamers and end mills, while ensuring secure axial grip. The design minimises vibration and improves surface finish by keeping radial runout low; this is a practical advantage for shorter tools and fine-detail work. The compact size and standard interface also support straightforward replacement of worn collets and predictable tool behaviour across production runs. Robust shank and geometry for stable toolholding Built with a cylindrical shank (D 16 mm) and a lateral clamping surface, the chuck offers stable seating in toolholders and spindles that accept a 16 mm straight shank. The extended shank length (150 mm) and an indicated L1: 20 mm datum allow reliable axial positioning and force transmission during cutting. Compatibility with collets to DIN 6499 simplifies integration into existing fixtures and reduces the need for special adaptors. This construction translates directly into less tool chatter, improved dimensional control and a consistent feel during machining tasks. Practical benefits for workshops and small production runs The compact form factor and standardised interface make this chuck a pragmatic choice for machining shops, maintenance departments and toolrooms that require fast changeovers and dependable clamping of small-diameter tools. The mechanical simplicity supports low-maintenance operation and easy inspection; worn or damaged collets can be replaced quickly to restore original performance. For operations aiming to reduce downtime and maintain consistent part quality, the combination of ER collet technology and a straight 16 mm shank offers a balanced solution between flexibility and stability. Contact Metav Werkzeuge for tailored technical advice and to arrange supply of the TECWERK ER collet chuck through the Metav distribution network. Technical data Article number: 2120619001NW Product designation: TECWERK ER collet chuck Collet interface: ER 11 Manufacturer: TECWERK Facts Clamping range: 1–7 mm Shank diameter: 16 mm Shank length: 150 mm L1: 20 mm Special features Cylindrical shank with lateral clamping surface For clamping cylindrical-shank tools Compatible with collets to DIN 6499 FAQ Which collet series fits this chuck? The chuck uses ER 11 collets in accordance with DIN 6499, so ER 11 collets sized for the required tool diameters are compatible with the TECWERK ER collet chuck (SKU 2120619001NW). What tool diameters can be clamped? The clamping range is 1–7 mm, allowing secure holding of small drills, reamers and miniature end mills within that diameter span when the appropriate ER 11 collet is fitted. Is the chuck suitable for heavy milling operations? This collet chuck is optimised for small-diameter toolholding and light to moderate machining; for heavy milling with larger cutters, a chuck with a larger interface or different clamping concept would be more suitable than the TECWERK ER collet chuck. How does the 16 mm shank affect installation? The 16 mm cylindrical shank provides a standardised mounting diameter for toolholders and adaptors; its length and lateral clamping surface support stable seating and simple integration into compatible spindles or adaptors. Can worn collets be replaced to restore performance? Yes, replacing worn ER 11 collets restores clamping accuracy and concentricity; the chuck is designed for routine collet replacement to maintain consistent machining quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm ER Collet Chuck 2-20mm Clamping Range Cylindrical Shank D50 L35 - TECWERK
Take advantage of a robust combination of precise clamping, a wide clamping range, and proven compatibility with ER32 collets for a dependable toolholding solution in workshops and production lines. Order the chuck directly via Metav Werkzeuge or consult the Metav team for specification matching and procurement. TECWERK ER collet chuck — clamping range 2–20 mm, Ø 50 mm body A TECWERK ER collet chuck designed for secure clamping of cylindrical‑shank tools in ER32 collets, suitable for workshop and CNC toolholding applications ER 32 compatibility, DIN 6499 Clamping range 2–20 mm Diameter 50 mm body Cylindrical shank with lateral clamp face Accuracy that improves part quality and repeatability The ER collet chuck delivers a concentrated clamping force across the tool shank, which reduces runout and supports consistent machining results. Compatibility with ER32 collets and adherence to DIN 6499 ensure standardised interfaces, simplifying collet selection and replacement. The compact diameter 50 mm body provides torsional rigidity, so cutters and drills run truer and produce a finer surface finish with less rework. Secure grip and fast tool changes for higher uptime Featuring a cylindrical shank and a lateral clamping surface, the chuck offers reliable axial and radial support for cylindrical‑shank tools. The wide clamping range 2–20 mm covers a broad selection of tool diameters without frequent collet swaps, reducing set‑up time. The result is improved machine availability and a measurable increase in productivity when scheduling short production runs or rapid tool changes. Designed for straightforward integration into existing toolholding systems The chuck is prepared for use with standard ER collets and common toolholders, allowing smooth insertion into established workflows and quick retrofits on milling spindles and adaptors. Its standardised interface and compact form factor enable simple alignment and predictable concentricity. The use of standard collets supports stock consolidation and lowers tooling overhead in the long term. Trusted supply and expert support from Metav Metav combines wide product availability with an emphasis on accessible precision. With a broad range of metrology and workshop solutions, Metav supplies consistent stock levels from Emmerich and provides clear ordering and delivery information. For customers requiring specification matching or clarification of application suitability, Metav offers direct consultation and transparent order handling to keep production moving. For procurement of the TECWERK ER collet chuck with ER32 compatibility, contact Metav Werkzeuge for specification advice and ordering — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2120620191NW Product: Spannzangenfutter ER (ER collet chuck) Brand: TECWERK Facts Collet size: ER 32 Clamping range: 2–20 mm Diameter: 50 mm Special features Cylindrical shank Lateral clamping surface For tools with cylindrical shank to DIN 6499 FAQ What collet size is required for this chuck? This chuck is specified for ER32 collets; ER32 collets to DIN 6499 match the chuck interface. Which tool diameters can be clamped with this chuck? The clamping range covers 2–20 mm, allowing secure holding of many common cutter and drill shank sizes. Is the chuck suitable for CNC milling and workshop use? Yes, the design and standard ER32 interface make the chuck suitable for both CNC and manual workshop applications where cylindrical‑shank tools are used. How does the chuck improve machining repeatability? The concentrated clamping and rigid diameter 50 mm body reduce runout and slippage, which improves repeatability and surface finish consistency. Can this chuck be ordered through Metav Werkzeuge? The item with SKU 2120620191NW (TECWERK ER collet chuck) is available via Metav Werkzeuge; contact info@metav-werkzeuge.com or phone +49 2822 7131930 for assistance Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Face And Boring Head Set BT-50 With Collet Range Ø10–Ø110mm, Set - Vertex
A compact facing and boring head set that pairs the BT-50 taper interface with a wide clamping range (Ø10–Ø110 mm) for robust shop-floor performance; benefits include higher rigidity and reproducible results. Order the set directly via Metav Werkzeuge or consult the Metav team for application guidance. Vertex VBHC Facing and Boring Head Set (BT-50, Ø10–Ø110 mm) The VBHC Facing and Boring Head Set is a precision tooling set for facing and internal/external boring, designed for mounting on BT-50 taper spindles in machine shops and toolrooms BT-50 taper collet interface Clamping range Ø10–Ø110 mm Complete facing and boring head set Robust 5.65 kg assembly weight Engineered for consistent facing and boring performance The set combines a BT-50 interface with a design focused on rigidity and repeatability, enabling stable machining of face and bore operations. The modular construction reduces run-out and vibration, which improves surface finish and extends cutter life. With a focus on reproducible centreline alignment, the tooling delivers measurable improvements in cycle stability and process control for production and repair work. Adaptable clamping for diverse diameters and straightforward set-up With a clamping capacity of Ø10–Ø110 mm, the set covers a broad range of shaft and bore sizes, reducing the need for multiple specialised tools. The use of a standard collet system simplifies changeovers and maintains concentricity across diameters, so calibration and measurement remain efficient. The complete set layout groups essential components for faster set-up and predictable machining times in mixed-production environments. Durability, serviceability and seamless shop-floor integration The assembly weight of 5.65 kg reflects a solid build that resists deflection under load while remaining manageable for routine handling. Components are designed for straightforward maintenance and replacement, supporting long-term precision and low downtime. As a Vertex solution, the head set integrates readily with established tooling registers and machining centres, helping to standardise processes and safeguard part quality across shifts. Secure the rigid BT-50 facing and boring solution from Vertex through Metav Werkzeuge — contact Metav Werkzeuge for tailored configuration and rapid supply at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data Article number: VBHC-BT50-BC2 GTIN: 4061905091308 ECLASS: 21041590 Brand: Vertex Facts Weight: 5.65 kg Clamping range: Ø10–Ø110 mm Set: yes Special features Collet type: BT-50 Designation: Facing and boring head set FAQ What diameters can be machined with this head set? The VBHC Facing and Boring Head Set supports diameters from Ø10–Ø110 mm, covering common shaft and bore sizes for general engineering work. Which spindle taper does the set require? The set is designed for a BT-50 taper interface; the VBHC-BT50-BC2 fits machines equipped with a BT-50 tool holder. Is the VBHC set suitable for high-precision finishing? Yes, the assembly emphasises rigidity and low run-out to support finishing operations where repeatable concentricity is required. Does the set include collets and mounting components? The product is supplied as a complete facing and boring set; specific collet sizes and included parts are listed with the SKU VBHC-BT50-BC2 in the product datasheet. How heavy is the assembly for handling and mounting considerations? The complete assembly weighs 5.65 kg, balancing robustness with practical handling for workshop personnel. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Grinding Attachment for Solid Carbide End Mills for Universal Tool Grinders, Precision - Vertex
Benefit from a compact accessory that expands the capabilities of existing cutter grinders, delivers consistent results through a robust 2 kg construction and is clearly identifiable by GTIN 4061905083808 — order the U2-E grinding attachment directly via Metav Werkzeuge or consult our specialists for integration advice. U2-E — Grinding attachment for shank cutters (Vertex) The U2-E is a dedicated grinding attachment for universal cutter grinders, designed to extend workshop flexibility and enable precise finishing of shank cutters. Grinding attachment for shank cutters Compatible with universal cutter grinders Solid 2 kg construction Identifiable by GTIN 4061905083808 Extend machine capability with a focused accessory The accessory provides a straightforward way to increase the functional range of existing cutter grinders without requiring a dedicated new machine. By adding this grinding attachment, workshops gain the benefit of adaptable tooling for a wider range of shank cutter tasks. The design emphasises compatibility with universal units, allowing the attachment to be integrated into established production sequences and reducing the need for multiple specialist machines. Practical efficiency for workshop workflows Fitting the attachment streamlines changeovers and contributes to a leaner process flow. With a compact, robust construction and a clear identification code, the unit supports predictable handling and inventory management. The result is less time spent on logistics and more time on machining operations, supporting a measurable improvement in throughput where the focus is on repeatable finishing and stable set-up routines. Technical clarity and safe handling in daily use The accessory’s layout is kept deliberately simple to aid familiarisation during routine shifts; this reduces setup uncertainty and helps maintain consistent quality. Relevant numeric data — such as the item weight of 2 kg and GTIN for traceability — simplifies storage and procurement procedures. Clear labelling and straightforward mounting reduce the risk of assembly errors and support operator confidence during frequent tool changes. Built for professionals who value reliability Designed as an accessory within the cutting tools and CNC context, the unit complements existing grinders to deliver dependable finishing without unnecessary complexity. Workshops focussed on precision and uptime will appreciate the ability to expand capabilities while maintaining familiar operating principles. The accessory aligns with a practice of targeted investments that increase flexibility and protect production continuity. Contact Metav Werkzeuge to discuss how the Vertex U2-E grinding attachment can be integrated into existing cutter grinders and receive tailored advice from our team — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U2-E GTIN: 4061905083808 Weight: 2 kg ECLASS: 21059113 Facts SKU: U2-E Category: Vertex Product type: Grinding attachment for shank cutters Special features Compatibility: for universal cutter grinders Shop title: Vertex Zubehör jetzt im Webshop besorgen Description: Zubehör, rascher Versand, weitere ► Jetzt auf Rechnung bestellbar Günstig im Shop beziehen FAQ What is the primary purpose of this attachment? The accessory is intended as a grinding attachment for shank cutters, enabling universal cutter grinders to perform additional finishing tasks with improved versatility. Which machines is the attachment compatible with? Compatibility is with universal cutter grinders; the item is supplied as an accessory to broaden the function of those machines rather than as a standalone grinder. How heavy is the attachment and why does that matter? The attachment weighs 2 kg, a practical mass that supports secure mounting while remaining easy to handle during tool changes and maintenance. How can the attachment be identified for procurement or stock control? The unit is identifiable by GTIN 4061905083808 and the article number U2-E, facilitating traceability and ordering. Is this a Vertex product and where can additional information be obtained? Yes, the item is a Vertex accessory; for further integration or technical clarification Metav Werkzeuge can provide detailed advice. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Ground Parallels Set, 12 Pieces S45C Precision Ground, 0.01mm Accuracy - Vertex
Combine 0.01 mm repeatability, robust S45C construction and a compact 3 kg kit to simplify setup and inspection tasks; order the VP-146 directly via Metav Werkzeuge or ask our consultants for application advice. VP-146 Ground Parallels Set — precision-ground workshop parallels, Vertex The VP-146 Ground Parallels Set is a precision-ground set for accurate workholding, measuring and setup tasks in machining and inspection environments. Ground finish with 0.01 mm accuracy Set of 12 parallels in graduated heights Made from S45C steel for dimensional stability Compact set weight approx. 3 kg for easy handling Improved setup reliability through measurable precision Thanks to a ground finish and a declared accuracy of 0.01 mm, this parallel set provides a stable reference for clamping and inspection jobs where repeatable alignment matters. The finely finished bearing surfaces reduce rocking and tilt when parts are elevated on parallels, which translates into fewer adjustments during machining sequences. The combination of tight tolerances and solid construction supports consistent datum references for layout, transfer and comparative measurement work, reducing rework and measurement uncertainty. Practical composition that fits workshop routines The kit contains 12 parallels in graduated sizes, enabling flexible stacking and shimming for a wide range of component heights. The set composition includes pairs of parallels across several widths, supplied in fixed lengths for straightforward use on vises and inspection plates. Graduated heights mean quicker set-up times when establishing parallelism or lifting parts for through-drilling and finishing; the modular arrangement replaces improvised shimming and speeds up repetitive tasks on the shop floor. Durable material and compact handling for everyday use Constructed from S45C steel and supplied as a compact kit weighing around 3 kg, the set balances wear resistance with manageable handling. The material choice provides dimensional stability under routine workshop conditions while the ground surfaces maintain flatness over extended use. Because the set is finished and matched, it supports both bench inspection and machining fixtures without additional preparation, helping to streamline both quality control procedures and small-batch production runs. Contact Metav Werkzeuge in Emmerich for tailored advice on the VP-146 Ground Parallels Set or to request further technical details Technical Data SKU: VP-146 GTIN: 4061905094057 Manufacturer: Vertex Core dimensions & accuracy Dimensions: 195 x 180 x 90 mm Accuracy: 0.01 mm Weight: 3 kg Pieces per set: 12 Materials & special features Material: S45C steel Ground finish (geschliffen) Includes: 2x 4.6x32x150 mm; 2x 4.6x34x150 mm; 2x 4.6x36x150 mm; 2x 4.6x38x150 mm; 2x 4.6x40x150 mm; 2x 4.6x44x150 mm FAQ What applications are the parallels designed for? The VP-146 Ground Parallels Set by Vertex is intended for workshop setup, clamping and inspection tasks where accurate parallel support and repeatability are required. How does the stated 0.01 mm accuracy affect everyday use? An accuracy of 0.01 mm ensures that the parallels provide consistent datum surfaces for machining and measurement, reducing alignment errors and supporting reliable transfer and inspection operations with the VP-146 set. What sizes are included in the set and how are they arranged? The kit contains 12 matched parallels in graduated widths and identical lengths (150 mm), supplied in pairs as listed in the technical data for flexible stacking and shimming. Is S45C suitable for regular shop use? S45C offers robust mechanical properties and dimensional stability for routine workshop conditions; the ground finish on the VP-146 helps maintain flatness and wear resistance during standard usage. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Heavy-Duty Quick-Change Drill Chuck 1–13mm B16 Right-Hand - TECWERK
Take advantage of a self‑clamping, heavy industrial chuck with a wide 1–13 mm range and a B16 taper for secure mounting; it delivers reliable clamping and straightforward integration into stationary drilling setups. Order directly via Metav Werkzeuge or contact the consultants for specification support. TECWERK keyless drill chuck B16, 1–13 mm — heavy industrial, self‑clamping The TECWERK keyless drill chuck B16 1–13 mm is a heavy‑duty chuck designed for stationary machines, offering secure tool retention and compatibility with right‑hand rotation setups. Heavy industrial design for stationary machines Self‑clamping mechanism for secure tool grip Clamping range 1–13 mm for versatile tooling B16 taper arbor, right‑hand rotation, Ø 46 mm outer Reliable clamping for uninterrupted machining The chuck provides secure clamping through a self‑clamping mechanism that reduces the risk of tool slippage and minimises interruptions during operation. With a 1–13 mm clamping range, the device accommodates common drill shanks and small tooling without adapters, which simplifies tool inventory and changeovers. This design lowers the likelihood of lost production time, as the firm grip improves concentricity and helps maintain consistent drilling quality across batches. Rapid tool changes to maintain throughput A key advantage of the keyless design is speed: the keyless chuck enables fast insertion and release of tools, reducing non‑productive time between runs. The B16 taper provides a standardised mounting interface for many bench and pillar drills found in production and maintenance workshops. Specified for right‑hand rotation, the chuck matches the spindle direction of most conventional drilling machines, guaranteeing correct engagement and predictable performance when swapping tools during tight production schedules. Engineered for demanding workshop environments Built as a heavy industrial design, the chuck tolerates the rigours of continuous use in workshop and light industrial settings. The Ø 46 mm outer profile offers a compact footprint while ensuring mechanical robustness for repetitive cycles. Regular inspection and basic maintenance preserve performance; the straightforward construction allows for cleaning and lubrication without complex disassembly, supporting long‑term durability and reliable runout behaviour in everyday operations. Clear application scope and integration benefits Intended primarily for fixed machinery, the chuck suits pillar and bench drills that accept a B16 arbor and operate in right‑hand rotation mode. Its universal clamping range makes it appropriate for general drilling tasks in workshops, maintenance bays and small production lines where dependable tool retention is essential. Compatibility with common drill shank sizes reduces the need for special adapters, simplifying procurement and tool management for purchasing teams. For procurement or technical queries about the TECWERK keyless drill chuck and its suitability for specific machines, contact Metav Werkzeuge for prompt advice and stock information. Technical Data Article number: 2000832053NW Product: Keyless drill chuck Mounting: B16 Clamping range: 1–13 mm Outer diameter: 46 mm Form: heavy industrial design Rotation direction: right‑hand rotation Facts Clamping range: 1–13 mm Outer diameter: 46 mm Package unit: 1 Special features Self‑clamping mechanism Heavy industrial execution for stationary machines B16 taper arbor Designed for right‑hand rotation FAQ What machines is this chuck compatible with? The chuck mounts to machines with a B16 arbor and is designed for stationary drills that operate with right‑hand rotation; the TECWERK keyless drill chuck B16 1–13 mm fits standard pillar and bench drill spindles using that taper. Can the chuck handle quick successive tool changes? Yes, the keyless design on the TECWERK chuck enables rapid tool swaps without a key, which helps to maintain throughput in production and workshop environments. Is the clamping range suitable for common drill sizes? The 1–13 mm clamping range covers the majority of everyday drill shanks used in maintenance and general machining, reducing the need for multiple specialised chucks. How does the self‑clamping mechanism improve performance? The self‑clamping action secures the tool shank firmly, improving concentricity and reducing slippage, which leads to more consistent hole quality and fewer tool‑related stoppages. Are there special maintenance requirements? Basic cleaning and occasional lubrication keep the chuck performing reliably; its industrial construction is intended for straightforward serviceability under normal workshop maintenance routines. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Hollow Spindle Arbor Stop With Internal Jaw Expansion, Adjustable Clamp - TECWERK
Take advantage of a secure internal clamping mechanism and wide adjustability for concise spindle set-up and reduced adjustment time; the rear-insertion design and special tightening key ensure a positive hold and easy repositioning. Order the hollow spindle stop directly via Metav Werkzeuge or consult the specialists for application advice. TECWERK Hollow spindle stop – rear insertion, clamping range 4–110 mm A TECWERK hollow spindle stop for rear insertion, designed to secure tools inside hollow spindles with an adjustable internal gripping range Rear insertion for compact spindle installation Adjustable clamping 4–110 mm Special key for secure tightening Push-fit jaws for reliable internal grip Secure internal clamping for stable spindle operation The hollow spindle stop provides a mechanically positive internal grip by expanding its jaws against the spindle bore when the tightening screw is actuated. Inserted from the back of the hollow spindle, the device converts axial screw movement into radial bite, producing a secure seating that reduces the risk of slippage during rotation. The specified clamping range 4–110 mm covers many common hollow spindle diameters, enabling a single device to serve multiple set-ups and supporting consistent machining results through improved tool retention. Fast insertion and tool-free length adjustment Assembly and position changes are executed from the spindle rear with a special key that both locks and releases the mandrel. Tightening forces the gripping segments outward against the inner wall, while releasing the key permits linear repositioning along the spindle axis. This mechanism allows quick repositioning without full disassembly of the drive train, which translates into reduced downtime and faster changeovers for production or maintenance cycles. The straightforward operation is especially beneficial in high-throughput workshop environments. Reliable performance under repetitive use The mechanical principle—radial expansion by a central tightening screw—offers durable and repeatable clamping behaviour over many cycles. The design focuses on a positive internal hold rather than frictional surface contact alone, which tends to deliver a more dependable seat in service. For operations requiring repeatable axial positioning and a trusted internal grip, the unit is engineered to maintain a consistent reliable hold, supporting process stability and part quality. Simple integration and practical handling The rear-insertion concept keeps the external spindle envelope uncluttered and facilitates integration into existing spindle housings. Adjustment is carried out using the supplied special key, enabling precise repositioning in length without ancillary fixtures. The unit is supplied as a single packaged item, ready for installation into compatible hollow spindles and intended to streamline set-up operations while maintaining a compact footprint on the machine. For dependable internal clamping select the TECWERK hollow spindle stop and contact Metav Werkzeuge in Emmerich for specialist advice and order handling at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832499NW Item: Hohlspindelanschlag f.Spindel-D.94-110mm Product type: Hohlspindelanschlag Manufacturer: TECWERK Packaging unit: 1 Core specifications Clamping range: 4–110 mm Spindle diameter reference: 94–110 mm Packaging unit: 1 Features Rear insertion into hollow spindle Tightened and released with a special key Tightening screw expands jaws to inner wall Adjustable axial position after release Secure internal seating for reliable hold FAQ What clamping range does the device cover? The device provides a clamping range of 4–110 mm, suitable for many hollow spindle bores and flexible set-ups. How is the stop installed and secured inside the spindle? The stop is inserted from the rear of the hollow spindle and secured by a tightening screw; turning the supplied special key forces the jaws outward to press against the inner wall, creating a secure seat. Can the axial position be adjusted without full removal? Yes. When the special key is used to release the tightening screw, the stop can be moved axially and then retightened to the required position. Is this product suitable for high-cycle shop use? The mechanical expansion principle of the stop is designed for repeatable operation and offers consistent seating over multiple cycles, making it suitable for demanding workshop environments. Which brand and SKU identify this item? This hollow spindle stop is supplied by TECWERK and is listed under SKU 4000832499NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Horizontal Clamp 90° Vertical Base, Solid Arm With Safety Lock, 3.65kN Holding Force - Kukamet
Take advantage of the combination of compact size, high holding force and secure safety locking for consistent, repeatable fixturing; order the horizontal clamp directly via Metav Werkzeuge or consult Metav's specialists for application advice. Horizontal Clamp 112 — 150 mm arm, safety locking (Kukamet) The Horizontal Clamp 112 is a lever-operated clamp designed for secure fixturing in jigs and fixtures, offering a vertical base and a 90° clamping angle for compact workshop layouts. *150 mm robust arm for stable clamping *Vertical base for secure mounting *Safety locking prevents unintentional release *Holding force up to 3,650 N for strong fixation Consistent clamping force for reliable production The compact design delivers a clear technical advantage: a 150 mm arm combined with a holding force of 3,650 N and a maximum pressing force of 3,500 N ensures firm fixation of workpieces with minimal re‑adjustment. This repeatability reduces cycle-time variation in small-batch and fixture-based production. The numbers represent measurable clamping capability rather than marketing claims, so layout planners can calculate clamp spacing and load distribution with confidence when designing fixtures. Robust construction that reduces downtime A robust holding arm and integrated safety locking make the unit resistant to accidental release during machining or handling. The vertical base allows a compact footprint while keeping the clamp accessible for quick loading and unloading. The clamp's blackened, burnished finish provides corrosion resistance and a professional appearance that withstands workshop conditions. These features together mean fewer interventions for maintenance and a lower risk of unexpected stoppages. Easy integration into existing jigs and fixtures Thanks to the vertical base and a right‑angle stop at 90°, the clamp integrates into standard fixture plates and modular tooling systems without elaborate adapters. The lever‑clamp principle provides fast manual action for repeatable set-ups, suitable for short cycle changeovers or inspection stations. Where automation is later introduced, the predictable holding and pressing values support engineering calculations for gripper loads and safety factors. Choose Kukamet quality for dependable clamping performance and contact Metav Werkzeuge for specification assistance and prompt supply from Emmerich Technical data Article number: B112-4-D-L-C2 eClass: 21041719 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 150 mm Maximum pressing force: 3,500 N Maximum holding force: 3,650 N Clamping angle: 90° Weight: 0.73 kg Special features Vertical base (senkrechter Fuß) Massive holding arm Safety locking mechanism Blackened, burnished finish Lever clamp design FAQ What clamping force can be expected in typical use? The clamp provides a maximum holding force of 3,650 N; in most workshop applications the usable holding force will depend on fixture geometry and is given here as a reliable engineering value. Is the clamp suitable for integration into modular fixture plates? Yes, the vertical base and 90° orientation allow straightforward mounting in standard fixture plate layouts and modular systems. How does the safety locking work and why is it important? The built‑in safety locking holds the lever in its clamped position to prevent accidental release during machining, increasing operator safety and workpiece security. What finish and durability features does the clamp have? The clamp is supplied with a blackened, burnished finish that offers corrosion resistance and a durable surface for workshop environments. Can the clamp be used for quick manual set-ups in inspection stations? The lever action and compact arm length make the clamp well suited to manual, repeatable set-ups in inspection and small‑batch production areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With 90° Arm, Heavy-Duty Hold Arm And Safety Lock, 3.65kN Holding Force, Galvanised - Kukamet
Take advantage of the combination of a galvanised construction, 3,650 N holding force and a secure safety lock for reliable clamping in repetitive production tasks. Order the 111 horizontal lever clamp directly via Metav Werkzeuge or ask our consultants if needed. 111 horizontal lever clamp — galvanised, 150 mm lever arm (Kukamet) The 111 horizontal lever clamp is a compact horizontal clamp designed for secure workpiece fixing in assembly, welding and light-duty production environments. Galvanised steel construction Massive holding arm with safety lock Holding force up to 3,650 N 150 mm lever arm, 90° locking angle Secure clamping that keeps production moving The clamp delivers a holding force of 3,650 N and a maximum clamping pressure of 3,500 N, values that ensure stable fixation during machining and assembly operations. The mechanical design translates operator motion into consistent clamping power, reducing the risk of slippage and rework. For workshops that require repeatable results, the measured force values provide a reliable basis for process planning and tool selection. Robust materials for long service life Constructed from galvanised steel with a massive holding arm, this horizontal clamp resists corrosion and daily wear, lowering maintenance needs and downtime. The galvanised finish protects moving interfaces and the mounting base, which is particularly beneficial in occasionally humid or workshop environments. The compact mass of 0.73 kg keeps handling straightforward while the durable build supports many load cycles before service is required. Designed for safety and simple integration A dedicated safety lock and a 90° locking angle offer secure, audible engagement for operators, improving workplace safety during repetitive clamping tasks. The horizontal foot mounting enables flush attachment to workbenches or fixture plates, making the unit suitable for jigs, welding tables and assembly frames. Installation requires minimal adjustments, allowing the clamp to be incorporated into existing fixturing with predictable repeatability. Practical dimensions and application scope With a 150 mm lever arm, the clamp provides good reach for medium-sized fixtures without occupying excessive space on the work surface. The compact design and horizontal mounting orientation make it suitable for batch assembly, light fabrication, and holding components for inspection or finishing. Where precise, repeatable clamping is needed, this lever clamp offers a balance of strength, durability and compactness. Contact Metav Werkzeuge for ordering and precise application advice on the Kukamet 111 horizontal lever clamp; technical consultants are available to clarify suitability for specific production setups and to assist with procurement from Emmerich. Technical Data SKU: 111-4-D-L-C2 GTIN: 8680731500271 Model: 111 Manufacturer: Kukamet eClass: 21041719 ETIM: EC011973 Facts Arm length: 150 mm Holding force: 3,650 N Clamping pressure: 3,500 N Weight: 0.73 kg Locking angle: 90° Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety lock Category: clamp FAQ What applications suit this horizontal clamp best? The Kukamet 111 horizontal lever clamp is suited to assembly, welding and light production tasks where repeatable clamping and a compact footprint are required. How much force does the clamp provide? The unit provides a holding force of 3,650 N and a maximum clamping pressure of 3,500 N for secure fixation during machining and assembly. Is the clamp resistant to workshop conditions? Yes, the galvanised construction and robust holding arm make the clamp resistant to corrosion and suitable for typical workshop environments. How is the clamp mounted? Mounting is via a horizontal foot, enabling attachment to workbenches, fixture plates or welding tables for flush integration. What safety features are included? A mechanical safety lock secures the lever in the engaged position and a 90° locking angle gives clear feedback when the clamp is closed. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With Angle Base, Max Clamping Force 1200N, Max Thrust 1000N - AMF
The combination of a compact footprint, the angled foot and strong holding force ensures secure, repeatable clamping in constrained setups; the reliable clamping force reduces part movement and rejects downtime. Order the clamp directly via Metav Werkzeuge or consult our specialists for application-specific advice. Horizontal clamp Waagrechtspanner Nr.6833 Gr.2 with angled foot – AMF The Waagrechtspanner Nr.6833 Gr.2 is a size‑2 horizontal clamp with an angled foot, engineered for secure fixturing in assembly and machining environments. Horizontal clamp with angled foot Holding force up to 1,200 N Clamping force up to 1,000 N M6 x 35 pressure screw included Efficient, consistent clamping that reduces rework The clamp delivers a clear operational benefit by converting its rated clamping force of 1,000 N and holding force of 1,200 N into reliable part restraint. This performance level reduces micro‑movement during machining and assembly, helping to lower scrap rates and minimise rework. The measured forces indicate how much load the device applies and sustains: clamping force refers to the pressure applied to the workpiece, while holding force denotes the maximum retention under side loads. For production planning, these values provide an objective basis to compare fixtures and select the correct component for stable, measurable results. Space‑saving mounting and straightforward integration Fitted with an angled foot, the unit enables mounting on perpendicular or offset datum surfaces without complex adapters, simplifying fixture design and saving bench space. The supplied M6 x 35 pressure screw allows immediate installation into existing setups designed for metric fastenings. With a compact operational length (L1: 162 mm) and clearly defined heights (H: 73 mm, H1: 94 mm, H2: 68 mm), this clamp suits confined jigs where clearance is limited and repeatability is required. The compact geometry expedites integration into modular fixture systems and supports quick changeover between parts. Robust specification and clear numerical data for planners Design decisions benefit from explicit numerical specifications: many of the critical dimensions are recorded (for example, A: 6.2 mm, B: 52 mm, C: 20 mm, I: 13.2 mm) so engineers can model the clamp into CAD assemblies and confirm interference envelopes. The mechanical concept is intentionally straightforward, which minimises maintenance effort and simplifies spare‑part planning. Where higher‑level compatibility questions arise, the clear values allow process engineers to calculate clamping moments and verify that the device meets safety margins for specific operations. Contact Metav Werkzeuge for tailored fixture advice and secure supply of the AMF horizontal clamp — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to discuss application requirements and delivery from Emmerich. Technical data Article number: 4123660120NW Type: 6833 Label: Waagrechtspanner Nr.6833 Gr.2 Winkelfuß AMF Product type: Horizontal clamp Execution: with angled foot Packaging unit: 1 Facts Max clamping force: 1,000 N Max holding force: 1,200 N Size: 2 A: 6.2 mm B: 52 mm C: 20 mm D: 5.6 mm E: 32 mm F: 10.5 mm H: 73 mm H1: 94 mm H2: 68 mm I: 13.2 mm K: 6 mm L1: 162 mm M: 25.5 mm N: 37 mm P: 32 mm a: 90° Special features With angled foot Pressure screw M6 x 35 Compact footprint for confined fixtures Clear dimensional data for CAD planning Brand: AMF FAQ What forces does the clamp provide and what do they mean? The clamp offers a clamping force of 1,000 N and a holding force of 1,200 N; clamping force is the applied pressure on the workpiece, while holding force is the maximum retention against lateral loads. Which mounting options are supported by the angled foot? The angled foot enables mounting on perpendicular or offset surfaces, allowing the clamp to be fixed where a straight base would not provide sufficient clearance. Is the pressure screw included and what size is it? A pressure screw M6 x 35 is included with the clamp for immediate installation into metric fixture systems. Can the clamp be modelled into existing CAD assemblies? Yes, the specification provides detailed dimensions (for example L1: 162 mm, H1: 94 mm) so engineers can place the component in CAD and verify clearances and interference. Is this clamp suitable for precision repeatability applications? The compact design and defined mechanical forces support repeatable positioning in assembly and light machining, reducing micro‑movement and improving process consistency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Horizontal Base M8 x 65 Pressure Screw 3,000 N Clamping Force, 5,000 N Holding Force - AMF
Take advantage of a compact, fixture-ready design combined with reliable clamping performance: the horizontal foot execution and Size 5 configuration deliver a versatile mounting solution, while the 3,000 N pressing force and 5,000 N holding force guarantee secure workholding in repetitive operations. Order the clamp directly via Metav Werkzeuge or ask the consultancy team for application support. AMF Horizontal Clamp No. 6830, Size 5 — horizontal foot, 3 kN pressing force A horizontal clamp No. 6830 Size 5 for secure fixture clamping with a horizontal foot, intended for industrial workholding and repetitive machining setups Horizontal foot for fixed fixture mounting Max pressing force 3,000 N Holding force up to 5,000 N M8 x 65 clamping screw specification Secure clamping that improves cycle reliability The horizontal clamp delivers dependable clamping and retention for fixtures where consistent force matters. With a maximum pressing force of 3,000 N and a holding force of 5,000 N, the device is designed to maintain position under dynamic loads, which reduces part movement and rework. The compact Size 5 format and horizontal-foot execution mean it can be integrated into existing jigs and fixtures with minimal layout change, improving throughput without extensive redesign. Compact dimensions for straightforward integration Designed with precise dimensional data such as L1 321 mm, B 123 mm and an adjustable clamping height from +1.7 mm to 25 mm, the clamping range is clearly defined for planning and CAD integration. The unit is operated via an M8 x 65 clamping screw, a common thread size that simplifies replacement and maintenance. Where unfamiliar terms appear, the clamping range refers to the minimum and maximum height the clamp will secure, enabling correct part thickness planning without trial and error. Built for production environments and repetitive use The horizontal-foot configuration offers a low-profile mounting option that supports stable lateral load transfer during machining or assembly. Because the device is specified with numerical forces and dimensional references, it is suitable for fixture designers and production engineers seeking measurable, repeatable performance. The mechanical simplicity reduces setup time and the likelihood of functional faults in long production runs, supporting consistent output quality. Low-maintenance operation and predictable behaviour Operation is straightforward and is carried out with standard tools using the specified clamping screw; this keeps downtime low and maintenance simple. The clear numeric specifications allow process planners to calculate safety margins for clamping and to incorporate the clamp into automation sequences or manual fixtures. Documentation and parts lists can reference the No. 6830 identification for unambiguous ordering and replacement. For robust, measurable clamping in fixture builds, choose the AMF Horizontal Clamp No. 6830 Size 5 and contact Metav Werkzeuge for tailored mounting advice and supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833511NW Type: 6830 Designation: Horizontal clamp No. 6830, Size 5, horizontal foot (AMF) Execution: with horizontal foot Packaging unit: 1 Facts Max pressing force: 3,000 N Max holding force: 5,000 N Clamping height range: +1.7 mm to 25 mm L1: 321 mm A: 10 mm B: 123 mm C: 41.5 mm D: 8.5 mm E: 78 mm H: 46 mm H1: 73 mm H2: 128 mm Special features Size: 5 Clamping screw: M8 x 65 Execution detail: horizontal foot Additional dimension references included: F, I, K, L, L1, M, M1, N, P FAQ What clamping forces can be expected from this horizontal clamp? The AMF horizontal clamp No. 6830 (Size 5) provides a maximum pressing force of 3,000 N and a holding force of 5,000 N, suitable for secure fixturing in many production tasks. What is the adjustable clamping height of the clamp? The clamping height range for this model spans from +1.7 mm to 25 mm, which describes the minimum and maximum part thickness the clamp will accommodate. Which thread size is used for the clamping screw? The unit uses an M8 x 65 clamping screw specification, a common size that facilitates replacement and simplifies maintenance. Can the clamp be mounted in existing fixtures with limited space? The compact footprint, specified dimensions such as L1 321 mm and the horizontal-foot execution make the clamp suitable for integration into constrained fixture layouts. Is the product identified for unambiguous ordering? Yes, the clamp is listed as article number 4000833511NW, type 6830, which should be quoted when ordering or requesting spare parts. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Horizontal Base, Massive Holding Arm, 3.65kN Hold Force - Kukamet
Take advantage of the combination of a solid holding arm, compact 150 mm reach and reliable 3,650 N holding force for consistent workholding in production and assembly; order directly via Metav Werkzeuge or contact our consultants for specification advice. Horizontal clamp 111 — Kukamet horizontal lever clamp with 90° foot and 150 mm arm Horizontal clamp 111 is a robust horizontal lever clamp designed for secure workholding in machining, welding and assembly applications. Heavy-duty clamping arm 150 mm Horizontal base with 90° mounting Holding force 3,650 N Blackened finish for corrosion resistance Consistent clamping power for repeatable processes The clamp delivers a holding force of 3,650 N and a maximum pressing capacity of 3,500 N, providing predictable performance for repetitive tasks. The combination of a solid holding arm and precise lever geometry converts operator input into reliable clamping pressure, reducing part movement during machining and assembly. This stability improves process repeatability and lowers scrap rates, making the clamp suited to production benches and fixture tables where consistent results are required. Space-efficient horizontal mounting for workshop layouts A horizontal base with a 90° mounting orientation permits low-profile installation on tables and fixtures, saving vertical space in crowded workstations. The 150 mm arm reach balances compactness with accessibility, enabling secure clamping of components without impeding tool paths or neighbouring fixtures. The horizontal arrangement facilitates quick integration into modular fixturing systems and is particularly advantageous where clearance above the workpiece is limited. Robust finish and construction for low maintenance Constructed with a blackened finish and a massive holding arm design, the clamp resists surface wear and offers improved corrosion protection compared with uncoated alternatives. The lightweight yet sturdy build (approx. 0.782 kg) combines ease of handling with long service life, reducing downtime for replacements. Fewer service intervals and predictable wear behaviour contribute to a lower total cost of ownership in both single-shift and continuous-operation environments. Practical integration and application suitability The clamp is compatible with common fixturing practices and offers straightforward mounting via its horizontal foot. Its mechanical design requires no external power source, which simplifies integration into manual and semiautomatic production cells. The device suits general workshop use, jigs and fixtures as well as small-batch manufacturing where dependable manual clamping is preferred over powered alternatives. For reliable workholding from Kukamet, contact Metav Werkzeuge for tailored advice and delivery from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B111-4-D-C2 GTIN: 8680731507041 ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 150 mm Weight: 0.782 kg Holding force: 3,650 N Max pressing force: 3,500 N Angle: 90° Special features Horizontal foot mounting Solid holding arm Blackened finish Lever clamp design FAQ What is the rated holding force of the clamp? The horizontal clamp 111 provides a holding force of 3,650 N and a maximum pressing force of 3,500 N (SKU B111-4-D-C2) for secure workholding. Can this clamp be mounted on existing fixture plates? Yes, the clamp uses a horizontal foot for 90° mounting, making it suitable for integration into standard fixture plates and modular tables. Is the surface treated to resist corrosion? The clamp features a blackened finish that improves surface durability and corrosion resistance compared with untreated steel components. Which applications is this clamp best suited for? The clamp is intended for machining, assembly and general workshop fixturing where a manual lever clamp with a 150 mm reach and reliable holding force is required. How heavy is the clamp and does weight affect handling? The unit weighs approximately 0.782 kg, balancing portability with the robustness needed for frequent use in production environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With Horizontal Foot M4 x 25 Pressure Screw, 250 N Closing Force / 400 N Holding Force - AMF
Take advantage of a compact, low-profile clamping solution that combines reliable holding force and easy integration into jigs and fixtures. The clamp’s horizontal foot and measurable clamping values support consistent assembly throughput. Order the component directly via Metav Werkzeuge or consult our specialists for application advice. AMF Horizontal Toggle Clamp No. 6830, Size 0 – Horizontal Foot, 250 N Clamping Force The AMF Horizontal Toggle Clamp No. 6830 is a compact clamping device designed for fixtures and assembly applications, featuring a horizontal foot for low-profile mounting and reproducible clamping performance. Compact Size 0 for tight spaces Horizontal foot for low-profile mounting Clamping force 250 N for secure holding Holding force 400 N for reliable retention Efficient mounting for constrained fixtures The horizontal mounting design delivers a low-profile solution where vertical clearance is limited. Thanks to the horizontal foot arrangement and compact Size 0, the clamp slots into jigs and assemblies with minimal modification, reducing setup time and preserving workspace ergonomics. The incorporated M4 x 25 pressure screw permits simple pressure adjustment, enabling consistent contact pressure across repeated cycles and supporting predictable cycle times in batch production. Reproducible clamping and holding performance Measured values for clamping force (250 N) and holding force (400 N) provide a clear, quantifiable basis for fixture design decisions. These figures translate directly into predictable workpiece retention under lateral and axial process loads, lowering the risk of movement during machining or assembly. Specifying these forces early in the fixture design phase streamlines safety margins and helps avoid costly rework, while the toggle action ensures a secure mechanical lock without continuous external power. Simple integration and maintenance for long service life Integration into existing tooling is straightforward: the clamp’s footprint and key dimensions support standardised mounting and straightforward replacement if required. The horizontal foot facilitates a flush installation that keeps tooling envelopes compact, while the pressure screw enables on-site fine adjustments without special tools. Routine maintenance consists of quick visual checks and occasional lubrication of the joint areas to retain smooth operation and dependable clamping cycles. For ordering, technical matching or application support, contact Metav Werkzeuge GmbH—our consultants provide hands-on advice from the Emmerich site and can help select the right clamping configuration for the task at hand; eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 4000833506NW Type: 6830 Product: Horizontal clamp Execution: horizontal foot Brand: AMF Packaging unit: 1 Performance data Maximum clamping force: 250 N Maximum holding force: 400 N Pressure screw: M4 x 25 HW min.: -5.5 mm, HW max.: 0 mm Design & dimensions Size: 0 Key dimensions (mm): A 4 · B 28 · C 11.5–15.5 · D 4.6 · E 9 · F 5.5 Height values (mm): H 14.5 · H1 23 · H2 34 Length values (mm): L1 79 · M 16 · N 25 · P 25.5 FAQ What clamping and holding forces does this clamp provide? The clamp delivers a clamping force of 250 N and a holding force of 400 N, values indicated for reliable retention in fixture applications with moderate process loads. Is the clamp suitable for low-clearance installations? Yes, the horizontal foot and Size 0 format make it suitable for installations where vertical space is restricted and a low-profile mount is required. How is the clamping pressure adjusted? Clamping pressure is set using the supplied M4 x 25 pressure screw; fine adjustment allows reproducible contact pressure without specialised tools. Which dimensions are relevant for fixture layout? Key dimensions include A 4 mm, B 28 mm, C 11.5–15.5 mm and L1 79 mm; these values support precise positioning and repeatable mounting in jigs and fixtures. What material is the clamp made of and is surface coating specified? Material and coating are not specified in the provided data; for material confirmation and surface treatment options, Metav Werkzeuge can supply detailed information on request. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Horizontal Foot M6 x 35 Pressure Screw, 1,000 N Clamping Force - AMF
Take advantage of the combination of reliable clamping performance and a compact low-profile design for stable workholding in confined setups; order the unit via Metav Werkzeuge or contact our consultants for technical clarification. AMF Horizontal Clamp No. 6830, size 2 — horizontal foot, low-profile clamping The AMF Horizontal Clamp No. 6830 is a compact horizontal hold-down device designed for secure clamping in tight fixtures and machine setups, offering robust clamping and repeatable positioning for series production and toolroom use. Horizontal foot for low-profile clamping Clamping force up to 1,000 N Holding force max 1,200 N Robust clamping performance for repeatable production The clamp delivers a clamping force of 1,000 N and a holding force of 1,200 N, providing a reliable grip for short-cycle machining and assembly tasks. These figures translate into consistent part stabilisation during cutting, drilling or light milling operations, reducing positional variance and helping to maintain process tolerances. The force values are particularly relevant where repeatability is essential, because the device converts applied torque into a predictable axial hold that aids downstream quality control. Space-saving design that fits tight fixtures Equipped with a horizontal foot and configured as size 2, the clamp is built for low-profile placements where vertical space is limited. The compact footprint means the device integrates into dense fixture layouts without obstructing tool paths, enabling closer nestings of workpieces and more efficient use of clamping stations. The lower profile also minimises interference with tool holders and cutting trajectories, which helps to shorten setup times and increase machine utilisation. Straightforward adjustment and secure fixation Adjustment is achieved via the supplied pressure screw (M6 x 35), offering a simple mechanical interface for setting contact pressure and accommodating small height deviations within the specified range. The clamp’s adjustable stroke range supports fine tuning of clamping height so fixtures remain adaptable across different part geometries. This straightforward mechanism ensures quick repeat setups and reduces the need for extensive rework between batches. Practical benefits for workshop and small-series production The unit is engineered for ease of integration into jigs and fixtures, promoting fast assembly and long-term stability on the workbench or in CNC fixtures. Its measured specifications support reliable short-run production while maintaining flexibility for bespoke tasks. By choosing a compact horizontal solution, process planners gain a balance of accessibility and strength that supports efficient workflows and fewer handling delays. Secure the AMF Horizontal Clamp No. 6830 through Metav Werkzeuge; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and prompt delivery from Emmerich. Technical data Article number: 4000833508NW Type: 6830 Product: Horizontal clamp Label: Waagrechtspanner Nr.6830 Gr.2 horizontal foot AMF Execution: with horizontal foot Packaging unit: 1 Core figures Clamping force max: 1,000 N Holding force max: 1,200 N Size: 2 Andrückschraube: M6 x 35 A [mm]: 6 B [mm]: 64 C [mm]: 26 D [mm]: 5.6 E [mm]: 32 F [mm]: 16 H [mm]: 24 H1 [mm]: 45 H2 [mm]: 68 HW min. [mm]: -1.5 HW max. [mm]: 5 I [mm]: 13.2 K [mm]: 6 L1 [mm]: 162 M [mm]: 19.5-29.5 N [mm]: 42 P [mm]: 38 Special features Horizontal foot for low-profile mounting Pressure screw M6 x 35 Size 2 configuration Manufacturer: AMF SKU: 4000833508NW FAQ What maximum clamping and holding forces are available? The AMF Horizontal Clamp No. 6830 provides a clamping force of up to 1,000 N and a holding force of up to 1,200 N, suitable for secure fixation in light to moderate machining tasks. How is the clamp adjusted for different part heights? Adjustment is made using the M6 x 35 pressure screw; the unit accommodates a height range with HW min. -1.5 mm and HW max. 5 mm and an M stroke range of 19.5–29.5 mm. Is the clamp suitable for tight fixture arrangements? Yes — the horizontal foot and size 2 configuration create a low-profile footprint designed to fit compact fixtures and dense nesting layouts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Horizontal Foot M8×45 Pressure 1800N, Retention 2500N - AMF
Take advantage of a robust combination of holding force 2,500 N, clamping force 1,800 N and a compact Size 3 footprint to secure repeatable workholding in assembly and fixture applications; order the AMF horizontal clamp directly via Metav Werkzeuge or consult our team for application advice AMF Horizontal Clamp No. 6830 (Size 3) — horizontal foot, M8 x 45 pressure screw The AMF Horizontal Clamp No. 6830 (Size 3) is a compact horizontal-foot clamp designed for secure and repeatable workpiece holding in production fixtures and assembly stations. Horizontal foot for stable mounting Holding force up to 2,500 N Clamping force up to 1,800 N Size 3 with M8 x 45 pressure screw Secure clamping that speeds up production The horizontal clamp delivers a reliable holding force of 2,500 N and a clamping force of 1,800 N, values that translate directly into safer, more stable setups on jigs and fixtures. In practical terms, higher holding and clamping forces reduce micro‑movement during machining or assembly, so processes run with less scrap and fewer reworks. The labelled forces relate to peak capacities for fixture design and should be considered alongside the overall fixture rigidity and the chosen pressure screw. Compact design for straightforward integration Built with a horizontal foot, the device is tailored for easy mounting onto plates and tooling boards where space is limited. The clamp features an M8 x 45 pressure screw and an adjustable clamping range M 22–31.8 mm, enabling fine adjustment of the workpiece position without additional components. Such dimensions make the clamp suitable for short-stroke clamping tasks and tight pallet layouts; the compact profile supports efficient use of bench and fixture real estate while maintaining consistent performance. Stable repeatability for production and assembly For repetitive operations, repeatability and simple adjustment are essential. This clamp offers a predictable mechanical behaviour that assists in achieving consistent cycle-to-cycle results, especially in small-batch production and repair work. The combination of Size 3 geometry and the specified mechanical data ensures the device is appropriate for fixture builders seeking dependable clamping with straightforward set-up. Where process reliability is a priority, the clamp helps reduce downtime associated with repositioning and retightening. Contact Metav Werkzeuge today to discuss the AMF Horizontal Clamp No. 6830 and how its holding and clamping characteristics can be integrated into existing fixtures; technical advice and tailored recommendations are available from our Emmerich team Technical data SKU: 4000833509NW Type: 6830 Product: Horizontal clamp Brand: AMF Version: with horizontal foot Key measurements Size: 3 Max clamping force: 1,800 N Max holding force: 2,500 N Pressure screw: M8 x 45 Clamping range M: 22–31.8 mm L1: 206 mm H1: 48.5 mm H2: 86 mm HW min.: -2 mm HW max.: 9 mm Special features Horizontal foot for fixture mounting Packaging unit: 1 Compact footprint suitable for tight layouts Adjustable pressure screw for fine alignment FAQ What is the maximum holding force of this clamp? The AMF Horizontal Clamp No. 6830 provides a maximum holding force of 2,500 N, suitable for stable fixturing in many assembly and production contexts. How is the clamp mounted to a fixture plate? The clamp features a horizontal foot intended for mounting to fixture plates; the compact design of the AMF horizontal clamp simplifies plate integration and alignment. What adjustment options are available for different workpiece heights? Adjustment is achieved via the M8 x 45 pressure screw and the specified clamping range M 22–31.8 mm, allowing fine tuning of the workpiece position in the AMF clamp. Is the clamp suitable for use in small-batch production and repetitive assembly? Yes — the Size 3 geometry and specified force figures make the clamp a practical choice where repeatability and compact fixture design are required. Which SKU should be ordered for this model? Order SKU 4000833509NW for the AMF Horizontal Clamp No. 6830, Size 3 with horizontal foot. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com