Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
16mm Clamping Screw M14 For 16/18mm Collet Chuck - TECWERK
Take advantage of a compact, industry-proven fastener that combines precise thread engagement and direct compatibility with Ø 16/18 mm face clamping chucks for steady tool retention. Order supply or request consultancy directly via Metav Werkzeuge for a seamless addition to the workshop inventory. Clamping screw M14, length 16 mm — for chuck Ø 16/18 mm (TECWERK) The Clamping screw M14 L16 mm for chuck Ø 16/18 mm is a purpose-built clamping fastener for face clamping chucks, designed to secure cylindrical-shank tools with a lateral drive flat in accordance with DIN 1835-B. M14 threaded connection for secure fixation Compact 16 mm overall length for tight setups Compatible with chuck diameters Ø 16/18 mm Suited to DIN 1835-B cylindrical shank tools Reliable thread and geometry for consistent clamping results The component uses an M14 thread together with a short 16 mm overall length to deliver reliable axial preload in confined assemblies. This geometry reduces axial play and helps maintain concentricity during rotating operations, which in turn lowers the risk of vibration and tool runout. Specifying the correct fastener minimises rework and supports continuous production by ensuring repeatable clamping performance. Designed for face clamping chucks and DIN-compliant tools Compatibility with face clamping chucks and tools featuring a lateral drive flat per DIN 1835‑B ensures positive torque transfer and axial restraint for cylindrical shank tooling. The lateral drive flat prevents rotation within the chuck seating, so the fastener secures the tool reliably under load. Explaining DIN 1835‑B in practical terms: it standardises the contact geometry for safe mechanical drive between chuck and tool, reducing slippage and improving machining accuracy. Simple specification supports quick selection and inventory control The compact specification — thread M14, length 16 mm, suitable for Ø 16/18 mm chucks — simplifies procurement and inventory decisions in production and maintenance settings. The straightforward characteristic set reduces ordering errors and shortens lead times, while the single-item packaging unit facilitates stock keeping for small batches or one-off replacements. Choosing a standardised clamping fastener like this also reduces the variety of spare parts needed on the shop floor, improving overall operational efficiency. Confidence through compatibility and supply reliability Selecting a recognised fastener from an established brand supports workshop reliability and peace of mind during demanding operations. The product’s straightforward mechanical function and standard compliance make it a pragmatic choice for engineering shops and maintenance departments that value durable, predictable clamping. Combined with Metav’s role as a quality filter for European supply, procurement benefits from consistent availability and documented conformity to industry norms. Contact Metav Werkzeuge for supply and technical advice on the TECWERK clamping screw M14 L16 mm to ensure compatibility with specific chuck models and to arrange prompt delivery from stock. Technical data Article number: 2000834138NW Product: Clamping screw, fastener Brand: TECWERK Facts Thread: M14 Overall length: 16 mm Suitable for chuck Ø: 16/18 mm Special features For face clamping chucks For cylindrical-shank tools with lateral drive flat per DIN 1835‑B Packaging unit: 1 FAQ What chuck diameters is this fastener suitable for? The clamping screw is suitable for chucks with an internal diameter of Ø 16/18 mm and secures tools accordingly. Which thread and overall length are specified for this product? This TECWERK clamping screw features an M14 thread and an overall length of 16 mm (SKU 2000834138NW). Can this fastener be used with tools to DIN 1835‑B? Yes — the fastener is intended for use with cylindrical-shank tools that have a lateral drive flat as specified by DIN 1835‑B. How does the lateral drive flat affect clamping performance? The lateral drive flat provides positive drive engagement with the chuck seating, improving torque transfer and preventing rotational slippage under load. Is this component suitable for confined or compact assemblies? The short 16 mm length is optimised for compact setups where axial space is limited while still providing secure clamping. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Clamping Screw M16 for 20mm Collet Chuck, For Cylindrical Shank Tools DIN 1835-B - TECWERK
Take advantage of a compact, standardised clamping solution that combines precise thread engagement and space-saving design for efficient workshop setups; order directly via Metav Werkzeuge or ask the consultants for tailored advice. TECWERK Clamping Screw M16, L 16 mm for Ø 20 mm Chucks The Clamping screw M16 L 16 mm for Ø 20 mm chucks is a compact clamping component for flat-jaw chucks, engineered to secure tools with cylindrical shanks and lateral drive according to DIN 1835‑B. For flat-jaw chucks with Ø 20 mm Thread nominal diameter M16 Short overall length L 16 mm Compatible with DIN 1835‑B shank tools Precision hold for repeatable machining results A compact clamping screw with a defined M16 thread provides a reliable mechanical connection between chuck and tool, reducing runout and improving repeatability. The compatibility with a Ø 20 mm chuck ensures standardised seating, which is particularly valuable for series production and frequent tool changes. Because the component is designed for tools with a cylindrical shank and a lateral drive in accordance with DIN 1835‑B, the user benefits from predictable torque transmission and secure axial retention—both essential for maintaining consistent part quality across batches. Space-saving design that simplifies setups With an overall length of L 16 mm, this clamping bolt suits assemblies where installation space is limited. The short profile minimises tool overhang and helps keep the centre of gravity close to the spindle, which lowers vibration and supports higher precision at the cutting edge. For workshops and production cells that prioritise compact tooling and quick changeover, the reduced length translates directly into faster set-ups and fewer collisions, enhancing operational efficiency without compromising secure clamping. Clear conformity and practical workshop benefits Adherence to the lateral-drive specification of DIN 1835‑B means the component integrates with a wide range of modern toolholders and collets, simplifying procurement and inventory management. Supplied as single units, the part is useful for targeted replacements or gradual fleet standardisation. The straightforward geometry and standard thread allow technicians to assess compatibility at a glance, reducing downtime during maintenance and contributing to steady throughput in day-to-day machining operations. For secure, space-efficient clamping with TECWERK quality, contact Metav Werkzeuge for product advice or to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000834139NW Label: Spannschraube M16 L.16mm f.Spannfutter-D.20mm TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Thread: M16 Overall length: 16 mm Suitable for chuck Ø: 20 mm Special features For flat-jaw chucks For cylindrical shank tools with lateral drive (DIN 1835‑B) Short overall length for compact setups FAQ What chuck size is this clamping screw compatible with? The clamping screw is specified for use with chucks of Ø 20 mm, ensuring standard compatibility for many flat-jaw chuck systems. Which thread and length does the part use? This component features an M16 thread and an overall length of 16 mm, as indicated on the product label (SKU 2000834139NW). Can this be used with tools that follow DIN 1835‑B? Yes, the design is suitable for tools with cylindrical shanks and lateral drive in accordance with DIN 1835‑B, providing secure drive engagement. Is the clamping screw suitable for compact installations? The short profile (L 16 mm) is intended for installations with limited axial space, helping to reduce tool overhang and potential interference. How is the item supplied in terms of packaging? The part is supplied as a single unit (packaging unit 1), suitable for replacement or incremental fleet update. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm Clamping Wedge Nr. 6321 0-75mm Height, M16x16x160 Clamp Screw Included - AMF
Take advantage of a compact clamping solution that fits standard 16 mm T-slots while offering a 0–75 mm clamping range and an included M16 x 16 x 160 clamping screw for immediate use; order via Metav Werkzeuge or consult our technical team for application advice. AMF Clamping Jaw Nr. 6321 — clamping prong for 16 mm T-slots, 0–75 mm clamping height The AMF Clamping Jaw Nr. 6321 is designed for secure workholding on tables with a 16 mm T-slot, offering a compact footprint and a simple mounting concept suitable for a broad range of workshop and industrial fixtures. For 16 mm T-slots Clamp height 0–75 mm Includes M16 x 16 x 160 screw Compact 140 mm length, 17 mm width Precise clamping where standardisation matters The clamping prong is built to match the industry-standard 16 mm T-slot, ensuring compatibility with common machine tables and modular fixtures. The clear specification of the T-slot interface removes ambiguity in procurement and reduces downtime caused by mismatched components. As a result, the component supports consistent part positioning and repeatable clamping force in batch production, contributing directly to throughput reliability and assembly-line stability. Adjustable range reduces set-up iterations With a 0–75 mm clamping range, the device offers measurable flexibility for different workpiece heights without additional adapters. This adjustability translates into fewer tool changes and faster clamping cycles, which benefits small-series manufacturing and custom setups. The straightforward height range also simplifies operator instructions and reduces the need for complex fixtures, improving operational efficiency on the shop floor. Ready to install — fewer parts to manage The package includes a M16 x 16 x 160 clamping screw, enabling immediate installation and use. The inclusion of the screw eliminates an extra procurement step and shortens the time from receipt to first clamping operation. The compact overall dimensions — 140 mm length and 17 mm width — ensure the component fits in constrained work zones and integrates easily into existing clamping arrays without obstructing neighbouring elements. Built for workshop practicality and consistent results The design focuses on a no-frills, robust approach that supports daily use in mechanical workshops and production cells. Clear mechanical specifications and a standardised T-slot interface enable planners to integrate the jaw into modular clamping schemes with confidence. For questions on specific applications or to confirm compatibility with existing fixtures, Metav Werkzeuge’s technical advisors are available to provide clarifications and installation guidance. Order the AMF clamping jaw through Metav Werkzeuge for dependable, standard-compatible clamping — contact Metav Werkzeuge in Emmerich for tailored advice and fast supply. Technical data Article number: 4000833067NW Type: Nr. 6321 Product type: Clamping jaw Manufacturer: AMF Dimensions & core data Clamping height: 0–75 mm T-slot width: 16 mm Width: 17 mm Overall length: 140 mm Packaging unit: 1 Features & additions Includes clamping screw M16 x 16 x 160 Label: Spannpratze Nr.6321 f. T-Nut 16mm Spann-H.0-75mm UID: 4000833067NW Compact footprint for modular fixtures FAQ Which T-slot size is this clamping jaw made for? The clamping jaw is designed for a 16 mm T-slot, matching standard table profiles used in many fixtures. What is the adjustable clamping height range? The device provides a 0–75 mm clamping range, allowing adaptation to varying workpiece heights. Is a clamping screw supplied with the item? Yes — the delivery includes a M16 x 16 x 160 clamping screw for immediate installation. What are the overall dimensions to check for fit? The component has an overall length of 140 mm and a width of 17 mm, suitable for compact arrangements. Can the clamping jaw be used immediately in a modular clamping system? The AMF clamping jaw is made to integrate with standard 16 mm T-slot systems and includes the required screw for straightforward mounting. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm E1 Tool Holder For Indexable Drill With Internal Coolant, DIN 69880 - TECWERK
Efficient spindle connection via the VDI40 interface and a compact clamping Ø16 mm deliver repeatable results and reduced setup time; combined with internal coolant and compliance with DIN 69880, the holder improves tool life and process reliability. Order the tool directly via Metav Werkzeuge or ask our consultants if needed. Tool holder E1 VDI40 – clamping Ø16 mm, internal coolant (TECWERK) The Tool holder E1 VDI40 is a VDI40 tool holder designed for indexable insert drills, with a cylindrical shank and internal coolant supply for reliable drilling and turning operations. VDI40 interface for secure spindle connection Clamping diameter Ø16 mm for insert drills Internal coolant supply for optimised chip control Conforms to DIN 69880 for standardised tooling Precision clamping for repeatable machining results The VDI40 interface and the Ø16 mm clamping diameter provide a compact coupling that prioritises repeatability and concentricity. A stable spindle connection reduces runout and vibration, which translates into consistent hole quality and longer insert life. Where fixture time and part tolerances matter, the combination of a standardised interface and tight clamping ensures faster setups and fewer rejected parts, supporting productivity in small-batch and series production alike. Internal coolant improves cutting performance and tool life Integrated internal coolant channels direct cutting fluid close to the cutting edge, improving cooling and chip evacuation. That targeted lubrication lowers cutting temperatures, reduces built-up edge and extends the service intervals of the cutting inserts. For applications that demand consistent surface finish and reliable cycle times, the internal coolant feature contributes to process stability and fewer interruptions for rework or sharpening. Standard conformity and system compatibility cut inventory complexity Compliance with DIN 69880 and the VDI40 mounting datum makes the holder broadly compatible with standard tool turrets and drilling systems. Compatibility with indexable insert drills simplifies tool management by allowing the same holder to accept widely used drill bodies and inserts. The standard form E1 and cylindrical shank ensure predictable interfacing, reducing the need for bespoke adaptors and minimising stock variants in the tooling cabinet. Robust design for workshop efficiency and easy handling Designed for routine industrial use, the holder balances compactness with mechanical stability to support precise drilling and light turning tasks. The construction supports repeatable positioning and straightforward handling during tool changes, which keeps downtimes to a minimum. By focusing on solid mechanics and standard interfaces, the solution delivers dependable performance for workshops and toolrooms aiming to streamline production workflows. For advice on selecting the right TECWERK tool holder E1 VDI40 and for fast supply from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data SKU: 2000833666NW UID: 2000833666NW Form: E1 Product type: Tool holder for indexable insert drills Brand: TECWERK Label: Werkzg.h.E1 DIN 69880 Spann-D.16mm VDI40 z.Wendeplattenbohrer TECWERK Packing unit: 1 Core dimensions Clamping diameter d2: 16 mm h1: 32.5 mm d1: 40 mm d3: 36 mm l3: 22 mm d6: 83 mm l1: 67 mm Special features VDI40 interface Internal coolant supply for drilling and turning tools Cylindrical shank Form E1 Suitable for indexable insert drills Standard: DIN 69880 FAQ What mounting interface does this holder use? The holder uses a VDI40 interface compatible with standard VDI turrets and spindles, designed for secure and repeatable mounting. Is this holder suitable for indexable insert drills? Yes, the Tool holder E1 VDI40 is intended for use with indexable insert drills, offering a clamping diameter of Ø16 mm and support for internal coolant. How does the internal coolant feature benefit machining? Internal coolant on the TECWERK holder directs fluid close to the cutting edge, improving cooling and chip evacuation to prolong insert life and enhance surface finish. Which standard does the holder comply with? The holder is built to DIN 69880, ensuring compatibility with standard tooling systems and simplifying tooling logistics. What are the key dimensions to check for machine compatibility? Key dimensions include the clamping diameter d2 = 16 mm, overall shank and interface measures (d1, d3, l1, l3) listed in the technical data for machine-side compatibility verification. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm ER Collet GB With 12mm Square Internal For Thread Cutting, 15 µm Runout - TECWERK
Benefit from precise clamping and a runout accuracy of 15 µm, paired with an internal square drive that supports secure thread cutting; the combination improves tool life and reduces rework. Order directly via Metav Werkzeuge or consult our specialists for application advice. ER 16-GB collet – 16 mm clamping, internal 12 mm square, TECWERK The ER 16-GB collet is a compact clamping solution for ER chucks, designed for thread cutting and general precision machining with an integrated internal square drive. Runout accuracy 15 µm Internal 12 mm square for taps Compatible with ER-style chucks Compact length L: 40 mm Consistent precision for thread-cutting tasks The ER 16-GB collet delivers runout accuracy of 15 µm, which directly reduces vibration and uneven wear during tapping operations. This level of precision means less scrap and fewer rejected parts in serial production, translating to measurable cost savings. The internal square drive provides positive engagement for thread-cutting holders, ensuring that rotational force is transmitted without slip. For teams seeking steady machining results, this small component contributes to larger process reliability. Built for ER systems and standard interfaces Conformity to DIN 6499 and the ER system makes this collet straightforward to integrate into existing clamping setups. With a clamping diameter of Ø 16 mm and an internal square of 12 mm, it suits common tap holders and compatible ER collet chucks, simplifying tool inventory. The collet’s overall length (L: 40 mm) keeps the tool projection minimal, which helps maintain rigidity and improves surface finish. These standardised dimensions support quick selection and interchangeability across workshop applications. Reduced setup time and improved workshop efficiency By using a standard ER collet with an internal square, changeovers between drilling, tapping and reaming operations are faster and more reliable. The precise fit reduces the need for repeated alignments, while the predictable runout minimises downstream correction work. In practical terms, this translates into shorter cycle times and higher uptime on machine tools, particularly where small-diameter tapping is frequent. The compact design supports tight toolpaths and dense fixturing without compromising clamping security. Clear selection guidance and safe handling Selection is simplified by the defined parameters: clamping diameter 16 mm, square 12 mm, and length 40 mm. When specifying a collet for a particular holder or tap, match these values to the toolholder and the intended tapping application. The ER 16-GB collet is intended for precision clamping in ER chucks and thread-cutting holders; if uncertainty exists about compatibility with a specific tap size or holder style, refer to technical advisors. Proper assembly and inspection contribute to maintaining the stated runout performance and prolonging service life. For precise tapping and secure clamping choose the TECWERK ER 16-GB collet and contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data Article number: 2000834978NW Type: ER 16-GB Label: ER collet; 16 mm clamping, internal square 12 mm; TECWERK Manufacturer: TECWERK Product type: Collet GB UID: 2000834978NW Facts Runout accuracy: 15 µm Clamping diameter: 16 mm Internal square: 12 mm Length (L): 40 mm Diameter (d): 16 mm Special features Internal square for thread cutting holders Designed to DIN 6499 Compatible with ER-style collet chucks Compact form factor for improved rigidity FAQ What runout tolerance can be expected from this collet? The ER 16-GB collet is specified with a runout accuracy of 15 µm, providing consistent rotational precision for tapping and light finishing operations. Is the collet suitable for thread-cutting applications? Yes, the integrated 12 mm internal square makes the ER 16-GB collet suitable for use with tap holders and thread-cutting tools that require a positive drive. Which chuck types are compatible with this collet? This collet is intended for ER-style chucks and follows the dimensions and interface conventions of ER systems to ensure interchangeability. What are the key dimensions to check for compatibility? Verify the clamping diameter (16 mm), internal square (12 mm) and length (L: 40 mm) against the toolholder and tap holder specifications to ensure correct fit. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm ER Collet, Clamping Length 46mm, Runout 5 µm - TECWERK
Benefit from precise clamping and low runout: compact dimensions and full-length clamping deliver consistent concentricity and dependable tool holding for production and workshop use. Order the collet directly via Metav Werkzeuge or ask the consultants for availability and advice. TECWERK ER 40/472 E collet — ER 40 collet, 16 mm clamping diameter A TECWERK ER 40/472 E collet designed for secure, high-precision clamping in ER 40 collet chucks across production and repair work DIN 6499-B compatibility Full-length tool clamping Runout and repeatability 5 µm Clamping diameter 16 mm, L 46 mm Consistent concentricity through precise geometry The collet is engineered to deliver consistent concentricity in demanding machining tasks. Conformance to DIN 6499-B ensures compatibility with standard ER systems while the full-length clamping principle holds the tool along its entire clamping surface, reducing deflection and vibration. The specified runout and repeatability of 5 µm provides a measurable improvement in finish quality and tool life compared with less rigid clamping methods, supporting stable process capability in serial and single-part production. Easy integration and reduced tooling complexity Compatibility with ER 40 chucks simplifies tool management: no intermediate sizes are required and the clamping geometry permits the use of the lead-in chamfer for quick seating. The design allows a clamping-range bridging of nominal minus 1.0 mm, which reduces the need for multiple collet sizes and streamlines inventory. For procurement and workshop planning this translates into fewer SKUs, faster setup and reduced changeover time when replacing or adjusting tooling in ER collet chucks. Compact dimensions with reliable holding power With a clamping diameter of 16 mm, an overall length L: 46 mm and outer diameter D: 41 mm, the collet offers a compact solution without compromising on holding capacity. The geometry supports stable tool retention even when the tool is positioned on the guiding chamfer, making it suitable for short-reach milling, drilling and reaming operations where space is limited. Selection of this collar-style clamping sleeve is appropriate for general workshop and light to medium production environments seeking dependable repeatability. Practical benefits for workshop efficiency The collet’s ability to grip tools over the whole clamping length reduces slippage and maintains concentricity during extended runs, which lowers scrap rates and the need for rework. Because intermediate sizes are unnecessary, maintenance routines become simpler and spare-part lists shorter. The measurable technical values support a rational purchasing decision: documented 5 µm runout and standard compliance make the component suitable for quality-focused workshops that require traceable, reproducible clamping performance. Contact Metav Werkzeuge for stock, advice and delivery from Emmerich — their specialists will confirm compatibility and lead times for the TECWERK ER 40/472 E collet (SKU 2000832976NW) Technical Data Article number: 2000832976NW Manufacturer: TECWERK Product type: ER 40 collet Packing unit: 1 Core data Clamping diameter: 16 mm Length L: 46 mm Outer diameter D: 41 mm Runout / repeatability: 5 µm Clamping-range bridging: nominal minus 1.0 mm Special features Conforms to DIN 6499-B Suitable for ER collet chucks No intermediate sizes required Tools held along full clamping length Can be clamped on the guiding/lead-in chamfer FAQ What is the declared runout for this collet? The declared runout and repeatability for the TECWERK ER 40/472 E collet is 5 µm, ensuring high concentricity in standard ER 40 setups. Can the collet be used on the leading chamfer of a tool shank? Yes, the design permits clamping on the guiding/lead-in chamfer so that tools can be seated securely along the whole clamping length. Which standard does the collet comply with? The collet is manufactured to DIN 6499-B, guaranteeing compatibility with ER 40 collet chucks that follow the same standard. What is the clamping-range bridging capability? The collet bridges the clamping range by nominal minus 1.0 mm, reducing the need for additional intermediate sizes. What are the key dimensions to check when replacing collets? Key dimensions are the clamping diameter 16 mm, overall L: 46 mm and D: 41 mm; the SKU for ordering is 2000832976NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm ER Mini Collet Nut M13 x 0.75, For ER11 Collet Chuck - TECWERK
Take advantage of the combination of compact design, precise thread fit and reliable compatibility for consistent clamping performance in small-tool applications. Order the TECWERK ER Mini clamping nut directly via Metav Werkzeuge or consult the team for technical guidance. TECWERK ER Mini clamping nut – compact design, M13 x 0.75 thread The ER Mini clamping nut is a compact collet-nut solution for use with ER 11 collet chucks, designed to secure small-diameter tooling with consistent axial alignment Compatible with ER 11 collets Thread M13 x 0.75 for secure fit Diameter 16 mm for compact setups Miniature design for small-tool applications Reliable clamping and consistent runout for small tooling A compact clamping nut such as this is engineered to deliver precise clamping for small-diameter tools. The combination of an accurately cut M13 x 0.75 thread with a 16 mm external profile ensures repeatable seating in the ER 11 collet system, which reduces radial runout and vibration during spindle rotation. In practice, this means improved surface finish and longer tool life when machining delicate parts or performing finishing passes. The function of a collet nut is to draw the collet into the chuck taper and generate uniform radial compression; the result is a stable hold even at elevated spindle speeds, so production runs remain consistent. Fast assembly and secure thread engagement for efficient workflow Thread quality and ease of assembly are essential in high-throughput environments. The M13 x 0.75 thread provides a fine pitch that permits controlled clamping torque, helping to avoid over-tightening while maintaining a firm grip. The small external 16 mm diameter reduces toolholder envelope in compact spindles or fixtures, enabling closer tool spacing on multi-spindle setups. Maintenance demands are low: regular cleaning of thread crevices and inspection for wear are sufficient to preserve clamping performance. Clear, measurable features translate directly into shorter setup times and fewer rejected parts. Seamless integration into ER 11 systems and workshop toolsets Compatibility is the principal advantage when selecting replacement or spare parts for collet chucks: this component is specified for ER 11 systems and matches the dimensional and threading requirements typical of that standard. Its compact design suits toolrooms, small-batch production and retooling tasks where space and accuracy both matter. For purchasers focused on workflow reliability, the nut's conformity with ER 11 geometry supports interchangeability and stock rationalisation. Technical queries about fitment or torque settings can be addressed by Metav Werkzeuge’s specialists, ensuring the part integrates smoothly into existing setups. For purchase or technical advice on the TECWERK ER Mini clamping nut, contact Metav Werkzeuge for tailored guidance and supply from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 2120620358NW Product type: ER Mini clamping nut Thread: M13 x 0.75 Diameter: 16 mm Suitable for: ER 11 Packaging unit: 1 Label: Spannmutter ER Mini ER 11 D.16mm z.Spannzangenfutter ER TECWERK UID: 2120620358NW Facts Thread pitch: M13 x 0.75 Outer diameter: 16 mm Packaging unit: 1 Special features Compatible with ER 11 collet chucks Designed for small-diameter tooling and compact spindles Ensures uniform radial compression of the collet Axite enrichment: passend zu Spannzangenfutter ER; für Abmessung ER 11; Gewinde M13 x 0.75mm; D: 16mm FAQ What collet systems is this nut compatible with? The TECWERK ER Mini clamping nut is specified for use with ER 11 collet chucks and matches the dimensional requirements of that system. Which thread does the clamping nut use? The component uses an M13 x 0.75 fine thread to allow controlled torque and secure engagement in the chuck assembly. Is the 16 mm diameter suitable for compact spindles? Yes, the 16 mm outer diameter is intended for compact setups and helps reduce the toolholder envelope in tight arrangements. Can this nut improve runout and finish on small tools? When paired with a correctly prepared collet and spindle, the nut aids in achieving consistent seating and reduced radial runout, which supports improved surface finish. Are spare nuts available for stocking and quick replacement? Spare clamping nuts such as this ER Mini model are commonly stocked to minimise downtime; Metav Werkzeuge can advise on availability and lead times. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm ER25 Collet For ER25/430 E, 5 µm Runout, 34mm Length - TECWERK
Take advantage of the combination of high precision, proven compatibility with ER tooling and reliable full‑length clamping for consistent machining results; order the collet directly via Metav Werkzeuge or ask the consultants for application advice. ER 25 Collet 430 E – 16 mm clamping diameter (TECWERK) A ER 25 Collet 430 E for ER collet chucks, offering full‑length tool support and a runout specification suited to precise production and workshop use. DIN 6499‑B standardised design Full‑length tool support Runout accuracy 5 µm Clamping tolerance: nominal −1.0 mm Consistent concentricity for repeatable results The primary benefit of a low runout specification is predictable machining quality. With a runout and repeatability of 5 µm, the collet reduces radial wobble at the tool tip, which improves surface finish, minimises eccentric wear and increases the probability of producing parts within tolerance. For users of ER tooling, this level of concentricity supports longer tool life and more reliable batch production, translating to fewer rejects and less rework. Secure tool holding across the entire clamping length Designed so that tools are held along the whole clamping length, the collet provides a stable interface between spindle and cutter. That full‑length support, combined with the ability to be clamped on the lead chamfer, ensures that short shanks and chamfered tools are gripped securely without reducing accuracy. The construction removes the need for intermediate shims or special adaptors, simplifying setup and reducing downtime between operations. Simple integration with ER systems and workshop equipment Compliant with DIN 6499‑B, this collet fits standard ER 25 chucks and aligns with common industry practice for clamping technology. The design accommodates a clamping compensation of nominal −1.0 mm, enabling the collet to bridge minor diameter deviations while maintaining stable grip. Compatibility with established ER systems makes replacement and stocking straightforward for maintenance teams and toolrooms. Built for reliable everyday use in production and trade Compact dimensions — L: 34 mm, d: 16 mm, D: 26 mm — make the collet a practical choice for both small‑series production and busy workshops. The combination of standardised interface, stable clamping and tight runout contributes to smoother process control and less variability in machining operations. For procurement managers and workshop supervisors, the tool represents a pragmatic choice that supports continuous supply and consistent part quality. Contact Metav Werkzeuge in Emmerich for stock availability and technical advice via info@metav-werkzeuge.com or call +49 2822 7131930 for assistance with selection and ordering. Technical data Article number: 2000832937NW Label: Spannzange Typ ER 25/430 E Spann‑D.16mm TECWERK Product type: ER collet Brand: TECWERK Packaging unit: 1 Facts Clamping diameter: 16 mm Length L: 34 mm Inner diameter d: 16 mm Outer diameter D: 26 mm Runout / repeatability: 5 µm Clamping compensation: nominal −1.0 mm Special features Conforms to DIN 6499‑B Suitable for ER collet chucks Tools held along entire clamping length Can be clamped on the lead chamfer No intermediate sizes required FAQ What is the expected runout for this collet? The specified runout and repeatability for the ER 25 Collet 430 E is 5 µm, which supports precise, repeatable machining results. Which clamping diameter does the collet accept? The collet is specified for a 16 mm clamping diameter and provides a clamping compensation of nominal −1.0 mm to accommodate slight diameter deviations. Is the collet compatible with standard ER chucks? Yes — the design complies with DIN 6499‑B and is intended for use with ER 25 collet chucks, facilitating straightforward integration into existing ER systems. How does full‑length support improve performance? Holding the tool along the whole clamping length increases stability, reduces tool deflection and helps maintain concentricity, resulting in better surface finish and longer tool life. What are the key dimensions to check for installation? Relevant dimensions are L: 34 mm, d (inner): 16 mm, and D (outer): 26 mm, which determine fitment and clearance in the chuck. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm ER32 Collet, 40mm Length, 5µm Runout, Clamping Range Nominal−1.0mm - TECWERK
The combination of DIN 6499‑B compliance and a 5 µm runout repeatability ensures consistent tool accuracy and reduced setup time; paired with full‑length holding and a 16 mm clamping diameter, this collet supports continuous, reliable machining. Order the collet directly via Metav Werkzeuge or consult the specialists for application guidance. Collet Type ER 32/470 E — ER 32 collet, clamping diameter 16 mm by TECWERK The Collet Type ER 32/470 E is a high‑precision ER 32 clamping collet intended for secure tool holding in milling and drilling operations, compatible with standard ER 32 collet chucks. ER collet for ER 32 chucks, clamping Ø16 mm Manufactured to DIN 6499‑B standard Holds tools along full clamping length Runout repeatability up to 5 µm Precision that reduces rework and improves cycle stability The Collet Type ER 32/470 E is built to maintain tight tolerances in repetitive machining. Compliance with DIN 6499‑B guarantees dimensional conformity and interchangeability with ER 32 systems, while a specified runout repeatability of 5 µm minimises radial run‑out at the tool tip. These characteristics translate into fewer rejected parts, lower scrap rates and more predictable tool life. By reducing geometric variation at the spindle interface, the clamping solution contributes directly to reliable production quality. Versatile clamping range that simplifies tooling logistics With a nominal clamping diameter of 16 mm and a documented bridging capacity: nominal minus 1.0 mm, the collet covers small diameter tolerances without the immediate need for intermediate sizes. The design allows the tool to be clamped on the guiding chamfer and along the full clamping length, which enhances contact stability and reduces axial play. This adaptability supports quicker set‑ups and a reduced inventory of spare collets, streamlining workshop logistics and reducing machine downtime. Robust geometry for dependable machining runs Mechanical dimensions such as L: 40 mm, d: 16 mm and D: 33 mm define the collet’s operating envelope and its fit within ER 32 tooling systems. The construction keeps tools secured over the entire clamping face, distributing clamping forces to lower point stresses and limit deformation. The result is improved concentricity and repeatable tool positioning during high‑precision tasks. Where spindle performance and consistent part quality are priorities, this collet offers a measurable improvement in process stability. Practical benefits for everyday workshop use Designed for straightforward integration into ER 32 collet chucks, the component requires no unusual maintenance and can be handled with standard tooling practice. Because the clamping system supports the tool on the guide chamfer, the effective gripping zone is increased, which can reduce slippage under load and improve finish quality. The collet’s specification provides a clear, engineering‑centred basis for selecting the appropriate clamping solution when repeatability and accuracy matter. Contact Metav Werkzeuge for application advice and availability of the TECWERK ER 32 collet; the Emmerich team will provide technical guidance and delivery information. Technical data Article number: 2000832953NW Type: ER 32 Product type: ER collet Manufacturer: TECWERK Packaging unit: 1 Facts Clamping diameter: 16 mm Length (L): 40 mm Inner diameter (d): 16 mm Outer diameter (D): 33 mm Runout / repeatability: 5 µm Bridging capacity: nominal minus 1.0 mm Special features Manufactured to DIN 6499‑B Suitable for ER 32 collet chucks No intermediate sizes required Tools held along full clamping length Can be clamped on the guide chamfer FAQ What collet chuck is required for this collet? The Collet Type ER 32/470 E is designed for use with standard ER 32 collet chucks and conforms to the DIN 6499‑B interface. How precise is the clamping performance of this collet? TECWERK’s ER 32 collet delivers a runout repeatability of 5 µm, ensuring consistent concentricity for precision machining tasks. Can the collet hold tools that are slightly undersize compared with nominal? Yes, the collet has a documented bridging capacity of nominal minus 1.0 mm, allowing some diameter variation without immediate need for a different nominal collet. Does the collet support clamping on the guide chamfer? The design permits tools to be clamped on the guide chamfer and ensures tool contact across the full clamping length, improving grip and stability. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm Magnetic Flat Gripper 18N Holding Force, Hartferrite, Without Threaded Bush - TECWERK
Take advantage of a compact, low-profile magnetic solution that combines a 16 mm diameter, 4.5 mm height and a reliable 18 N holding force for light-duty fixturing; supplied in practical packs of ten for straightforward stock handling — order or request availability via Metav Werkzeuge for fast delivery and technical guidance. Flat Magnetic Gripper D16 x H4.5 mm – 18 N holding force (TECWERK) A Flat Magnetic Gripper designed for light holding and fixturing in compact assemblies, supplied without a threaded bush for versatile surface integration Compact 16 mm diameter, 4.5 mm height Ceramic hard-ferrite magnetic material 18 N holding force for light-duty fixturing Temperature resistance up to 200 °C Space-saving design for tight fixtures and assemblies The small circular form factor with a 16 mm diameter and 4.5 mm height delivers a noticeably reduced footprint compared with bulkier magnets, enabling integration where space is limited. The slim profile simplifies placement into shallow recesses or narrow pockets on jigs and fixtures, while the flat face supports even contact with mating ferrous surfaces. This compact geometry reduces obstruction in automated handling systems and helps maintain clearances in dense assemblies, offering a practical solution for engineers and operators seeking efficient use of mounting area without compromising basic magnetic performance. Predictable holding performance and temperature resilience Manufactured from hard ferrite, the unit provides a stable magnetic field suitable for repeatable light holding tasks; the rated 18 N holding force offers a clear, measurable reference for design calculations and process planning. The component is specified with a recommended operating temperature up to 100 °C and a maximum of 200 °C, which allows selection for applications exposed to elevated temperatures that would impair many polymer-bonded magnets. Stating these limits helps maintenance planners and process engineers assess longevity under thermal load and avoid premature demagnetisation in high-heat processes. Integration flexibility and logistical convenience The delivery format as a pack of 10 supports predictable inventory control for workshops and production cells, reducing procurement frequency for frequently used small components. Supplied without a threaded bush, the part is intended for direct surface mounting or for combination with separate mounting hardware, offering flexibility for bespoke fixtures or adhesive attachment methods. Sourcing through a specialist supplier standardises quality and simplifies procurement—this is particularly valuable where consistent magnetic performance is required across multiple assembly lines or service kits. Request stock availability and tailored advice for the TECWERK flat magnetic gripper from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for product information and delivery options Technical data Article number: 4000832232NW Manufacturer: TECWERK Product type: Flat magnetic gripper Core technical data Diameter: 16 mm Height: 4.5 mm Holding force (max): 18 N Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C Special features Material: hard ferrite Design: without threaded bush Packaging unit: 10 UID: 4000832232NW FAQ What is the typical use for this flat magnetic gripper? The TECWERK flat magnetic gripper (SKU 4000832232NW) is intended for light holding and fixturing tasks where a compact magnetic solution is required, such as small-part assembly, positioning aids and jigs. Can the magnet be used at elevated temperatures? Yes; the component is rated with a recommended operating temperature up to 100 °C and a maximum of 200 °C, allowing use in processes with moderate thermal exposure. How strong is the magnetic hold in practical terms? The nominal holding force is 18 N, providing a quantifiable basis for selecting the magnet for light-duty retention and positioning applications; real-world pull values depend on contact area and surface condition. What mounting options are available given the lack of a threaded bush? Since the unit is supplied without a threaded bush, it is suitable for direct surface mounting, adhesive bonding or incorporation into fixture plates where separate mounting hardware can be applied. Is the magnet material suitable for corrosive environments? The gripper is made from hard ferrite, a ceramic magnetic material with good stability; for corrosive or wet environments, consider additional surface protection or consult Metav Werkzeuge for compatible alternatives. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Magnetic Flat Gripper With Threaded Bushing, Holding Force 18N, M3 - TECWERK
Take advantage of a compact, high-temperature-capable magnetic clamping solution that combines a small footprint with dependable holding power; its hard ferrite construction and integrated M3 threaded socket facilitate quick assembly and reliable positioning. Order the magnetic flat gripper directly via Metav Werkzeuge or ask our consultants if needed. Magnetic flat gripper D.16 x H11.5 mm with M3 threaded socket – TECWERK The Magnetic flat gripper D.16 x H11.5 mm with threaded socket is a compact magnetic clamping element for secure holding of small ferrous parts in fixtures and assemblies. Compact diameter 16 mm design Integrated M3 threaded socket for easy fastening Hard ferrite magnetic core for stable magnetism Holding force 18 N and high-temperature rating Space-saving design that simplifies fixture layouts The compact 16 mm diameter and 11.5 mm height provide a small installation footprint while delivering practical clamping performance for light-duty applications. This reduced profile enables closer element spacing in jigs and fixtures, which helps to increase usable work area on assembly plates. The compact geometry also supports repeatable positioning where accurate local holding is required, reducing the need for larger, more intrusive clamping hardware. Predictable holding under heat for robust process control Constructed from hard ferrite, the component maintains magnetic properties across an extended temperature range, offering a recommended operating temperature up to 100 °C and a maximum of 200 °C. The rated holding force of 18 N gives a clear, measurable parameter for process planning, enabling engineers to calculate safety margins and fixture layouts with confidence. Explaining these figures in simple terms: the specified Newton value represents the axial pull the magnet can sustain on a flat steel contact, which is useful when assessing suitability for light-retention tasks. Quick integration with standard M3 mounting An integrated M3 threaded socket allows immediate mounting with common fasteners and adapters, shortening assembly time and simplifying retrofits into existing tooling. The thread interface provides a secure mechanical link so the magnetic element can be positioned and replaced without special tools. For designers this means fewer bespoke components and a faster route from prototype to production, supporting efficient maintenance cycles and lower downtime in routine operations. Contact Metav Werkzeuge for a specification check or order coordination — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000832242NW SKU: 4000832242NW Brand: TECWERK Facts Diameter: 16 mm Height: 11.5 mm Thread: M3 Holding force: 18 N Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C Special features Material: hard ferrite Version: with threaded socket Product type: magnetic flat gripper Packaging unit: 10 FAQ What is the axial holding force of this magnetic element? The magnetic flat gripper provides a holding force of 18 N, which is the axial pull measured on a flat steel contact. Which thread is provided for mounting? Mounting is via an integrated M3 threaded socket, allowing direct fastening with standard M3 screws or adapters. What operating temperatures are possible with this gripper? The component has a recommended operating temperature up to 100 °C and can tolerate up to 200 °C for short periods or specialised applications. What material is the magnet made from and what does that mean for use? The core is made from hard ferrite, offering stable magnetic performance at elevated temperatures and suitability for general-purpose clamping of ferrous parts. How is the product typically used in fixtures? This compact magnetic element is used for light holding and positioning of small ferrous workpieces in jigs, assembly fixtures, and instrumentation where a low-profile clamp is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Pneumatic Clamp Horizontal Foot, 600N Push/1000N Hold, 95° Arm With Massive Support, Zinc-Plated - Kukamet
Benefit from consistent pneumatic clamping with a 600 N piston drive, a 1,000 N maximum holding force and a robust zinc-plated holding arm that resists corrosion and reduces maintenance. Order the 611 model directly via Metav Werkzeuge or ask our consultants if needed. 611 Pneumatic clamp by Kukamet — 600 N piston drive, 1,000 N holding force The 611 Pneumatic clamp is a compact pneumatic workholding solution for production jigs and fixtures, designed for horizontal-foot mounting and reliable repeatability in metalworking and assembly tasks. Massive holding arm for secure clamping Horizontal-foot mounting for stable installation Zinc-plated corrosion-resistant finish 1,000 N maximum holding force Consistent clamping performance for production use The pneumatic actuation delivers regular, repeatable clamping force, eliminating variability associated with manual toggles. With a 600 N piston force driven by a 16 mm piston, the unit provides stable engagement while the 1,000 N holding force secures workpieces through machining and finishing operations. Regular clamping pressure improves process yields and reduces scrap rates, making this clamp suitable for small series and automated fixtures. Robust construction that lowers maintenance needs Constructed with a zinc-plated finish and a massive holding arm, the design reduces wear and resists corrosion in workshop environments. The heavy-duty arm and plated surfaces extend service intervals and maintain clamping accuracy under frequent cycles. This translates into fewer interventions and less downtime for maintenance, supporting uninterrupted production and a steady quality level. Flexible mounting and easy integration into jigs The horizontal-foot fastening and a 44 mm arm length support a wide range of fixture layouts; an operating angle of 95° facilitates clearance during loading and unloading. The compact format and standardised fixing pattern simplify integration into existing tooling, while lever-type actuation logic aligns with common clamping schemes. The result is faster setup times and more consistent part presentation for downstream processes. Practical advantages for workshop planners The simple pneumatic interface reduces operator effort and allows centralised control of multiple clamps, which streamlines cycle times in repetitive operations. The compact cylinder and robust mechanics are optimised for frequent actuation, offering a balance between force capacity and footprint. Where space and repeatability matter, this clamp supports predictable operation and measurable productivity gains. For robust and repeatable pneumatic clamping specify the Kukamet 611 and contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 611-1-Q16-D-C1 Model: 611 Manufacturer: Kukamet Facts Maximum holding force: 1,000 N Piston force (max): 600 N Piston diameter: 16 mm Arm length: 44 mm Operating angle: 95° Special features Horizontal-foot mounting Zinc-plated finish Massive holding arm Suitable for lever-clamping applications FAQ How much holding force does this clamp provide? The clamp offers a maximum holding force of 1,000 N, providing secure fixation during machining and assembly operations. What is the piston specification for the pneumatic drive? The pneumatic drive uses a 16 mm piston delivering up to 600 N piston force for consistent actuation. Can the clamp be mounted directly to a fixture plate? Yes, the horizontal-foot mounting allows stable attachment to fixture plates and jigs for repeatable positioning. Is the surface treated to resist corrosion in workshop environments? The clamp features a zinc-plated finish that enhances corrosion resistance and extends component life. Which applications suit this clamp best? The design is intended for production jigs, assembly fixtures and repetitive machining tasks where reliable pneumatic clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pneumatic Push Rod Clamp 4.5 kN Push, 6.65 kN Hold, Zinc Plated - Kukamet
Take advantage of the combination of reliable pneumatic performance, robust galvanised construction and compact installation for a consistent clamping process. Order the Pneumatic push-rod clamp 621 directly via Metav Werkzeuge or ask our consultants if additional technical clarification is required. Pneumatic push-rod clamp 621 by Kukamet — 4.5 kN thrust, galvanised The Pneumatic push-rod clamp 621 is a compact industrial clamp designed for secure, repeatable clamping in production and jigs, ideal where fast pneumatic actuation and stable mounting are required. 4.5 kN pneumatic thrust 6.65 kN high holding force Galvanised steel construction Horizontal foot mounting for stability Robust performance for repeated cycles The clamp delivers a 4.5 kN actuation force and a 6.65 kN holding force, providing reliable mechanical restraint for typical machining and assembly operations. The pneumatic drive produces rapid, consistent motion so that cycle times are shortened without sacrificing clamping reliability. The device is built for repetitive use: the combination of pneumatic actuation and a piston diameter of 16 mm ensures a stable force profile that reduces rework and supports higher throughput on production lines. Compact design that eases integration A compact footprint and horizontal foot mounting allow the clamp to be positioned close to workpieces and incorporated into tooling fixtures with minimal redesign. The galvanised finish and restrained mass make the unit suitable for bench-mounted fixtures and short-travel applications where space is at a premium. Installation is straightforward because the mounting arrangement keeps the clamp aligned with the work surface, simplifying fixture layout and permitting quick mechanical integration into existing jigs. Durable finish for harsh workshop environments Constructed from galvanised steel, the clamp resists corrosion and abrasion commonly found in industrial workshops. The protective finish extends service intervals and reduces the frequency of replacements in environments with coolant mist or moderate humidity. This durability supports a lower total cost of ownership by maintaining clamping precision and reducing downtime for maintenance or part swaps. Clear technical advantages for production planners The unit’s balanced specification — compact mass, measured actuation force and robust holding capacity — makes it suitable for automated cells and manual jigs alike. The combination of pneumatic actuation and the specified force ratings allows planners to match the device to common fixturing tasks without overspecifying or compromising safety margins. The clamp is a pragmatic choice where reliable, repeatable clamping is required and where supply chain reliability and product consistency are valued. For procurement or application advice on Kukamet’s 621 pneumatic push-rod clamp, contact Metav Werkzeuge for a tailored recommendation and full product support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 621-4-Q16 Model: 621 Manufacturer: Kukamet GTIN: 8680731502961 Category: Spanner Facts Weight: 2.23 kg Max thrust: 4,500 N Max holding force: 6,650 N Piston diameter: 16 mm eClass: 21041716 ETIM: EC011973 Special features Material: galvanised steel Mounting: horizontal foot SKU: 621-4-Q16 Asset: 621-main.jpg FAQ What maximum thrust does the clamp provide? The clamp provides a maximum pneumatic thrust of 4,500 N, as specified for the Pneumatic push-rod clamp 621 from Kukamet. Is the clamping unit suitable for workshop environments with humidity? Yes, the galvanised finish of the Kukamet 621 offers corrosion resistance suited to typical workshop atmospheres and coolant exposure. How is the clamp mounted to fixtures? Mounting is by a horizontal foot arrangement, enabling secure attachment to jigs and workbenches while maintaining alignment with the clamped component. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pneumatic Push‑Rod Clamp 4.5kN Push Force, Zinc‑Plated Cast Body - Kukamet
Take advantage of the combination of 4.5 kN push force, a zinc‑plated cast body and compact horizontal mounting for robust, repeatable clamping in production environments. Order the Pneumatic Push‑Rod Clamp 641 directly via Metav Werkzeuge or consult the team for configuration advice. Pneumatic Push‑Rod Clamp 641 — horizontal foot mounting, 4.5 kN push force (Kukamet) The Pneumatic Push‑Rod Clamp 641 is a compact industrial clamp engineered for horizontal mounting to provide consistent, high‑force workholding in jigs, fixtures and assembly lines. Compact pneumatic clamp with horizontal foot 4.5 kN push force for secure workholding Zinc‑plated body with cast construction High holding force up to 8.1 kN Consistent clamping for reliable production flow This clamp delivers a 4.5 kN piston push force with a maximum holding force of 8.1 kN, ensuring steady contact and minimal component movement during machining or assembly. The pneumatic actuation provides rapid, repeatable cycles that reduce setup time and support higher throughput. The zinc‑plated cast body combines corrosion resistance with structural rigidity, translating into consistent clamping accuracy and fewer rejects over long production runs. Simple integration and durable operation With a 16 mm piston diameter, the device is designed for dependable pneumatic operation and straightforward integration into existing fixture systems. The horizontal foot mounting simplifies alignment on flat surfaces or baseplates and is suitable for automated tooling stations. The corrosion‑resistant finish and cast construction reduce routine servicing; scheduled inspections and standard pneumatic maintenance keep the unit operating reliably with minimal downtime. Practical applications and compatibility Designed for general industrial workholding, the clamp is well suited to small to medium fixtures in workshops and production cells where secure, repeatable clamping is required. Typical uses include assembly jigs, light machining fixtures and transfer systems where compact pneumatic clamps are preferred over mechanical alternatives. The combination of robust holding force and compact design helps maintain precision in repetitive processes, supporting quality assurance objectives. For robust, high‑force pneumatic clamping choose Kukamet’s 641 — contact Metav Werkzeuge for application advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 641-4-Q16 GTIN: 8680731503050 SKU: 641-4-Q16 Facts Push force: 4,500 N Holding force: 8,100 N Piston diameter: 16 mm Weight: 2.56 kg Special features Material: zinc‑plated with cast body Mounting: horizontal foot eClass: 21041716 ETIM: EC011973 FAQ What clamping force does the device provide? The Pneumatic Push‑Rod Clamp 641 delivers a piston push force of 4,500 N and a maximum holding force of 8,100 N for secure workholding. Is the clamp suitable for automated fixtures? Yes, the clamp’s compact pneumatic design and horizontal foot mounting make it suitable for integration into automated jigs and transfer systems. What material and surface protection does the clamp have? The unit has a zinc‑plated cast body, offering corrosion resistance and structural stability for industrial use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pneumatic Push‑Rod Clamp 4.5kN Push Force, Zinc‑Plated Cast Body, 8.1kN Holding Force - Kukamet
Take advantage of the combination of 4,500 N pneumatic thrust, a zinc-plated cast body and a compact horizontal-foot mounting to secure workpieces reliably and speed up production cycles. Order the clamp directly via Metav Werkzeuge or contact the consultants for tailored technical advice. Kukamet Pneumatic Push-Rod Clamp 671 — 4,500 N thrust, horizontal foot The 671 is a pneumatic push-rod clamp for industrial fixtures and repetitive clamping tasks, designed for secure holding in production and assembly applications. 4,500 N pneumatic thrust force 8,100 N maximum holding force Zinc-plated body with cast construction Ø16 mm piston for compact actuation Horizontal-foot mounting for stable fixing Reliable clamping performance for repetitive production The pneumatic design delivers a consistent 4,500 N thrust combined with an 8,100 N holding force, ensuring repeatable engagement and secure fixture retention across cycles. This level of performance reduces rework and minimises downtime by providing dependable clamping force for common jigs and fixtures. The Ø16 mm piston provides compact actuation that is suitable where space is limited, while pneumatic control enables quick cycle times and integration into existing compressed-air systems. The described force parameters support process stability in medium-duty production and automated handling stations. Durable construction that withstands workshop conditions Manufactured with a zinc-plated, corrosion-resistant finish and a robust cast body, the clamp is engineered for longevity in demanding environments. The combination of protective plating and a solid casting reduces wear from repeated use and exposure to workshop conditions, extending service intervals and preserving clamping accuracy. The horizontal foot mounting provides a low-profile, rigid attachment point that keeps fixtures stable under load, and the unit’s weight of 2.13 kg contributes to secure anchoring without unnecessary bulk. Practical installation and straightforward upkeep Designed for simple integration, the unit supports straightforward mounting and pneumatic connection with minimal auxiliary components. The push-rod mechanism operates via pneumatic actuation, which simplifies controls and reduces mechanical complexity compared with electric solutions. Routine maintenance is limited to standard lubrication and inspection of seals; the construction minimises service frequency, helping to keep maintenance costs low. Where automation or retrofitting is required, the compact form factor and standardised interfaces allow efficient incorporation into existing clamping systems while preserving reliable operation. For tailored advice on integrating the Kukamet 671 clamp into a production line or for a fast, reliable supply from Metav Werkzeuge, contact our technical consultants at Metav Werkzeuge in Emmerich Technical data SKU: 671-4-Q16 GTIN: 8680731503180 Brand: Kukamet Model: 671 Facts Max thrust force: 4,500 N Max holding force: 8,100 N Piston diameter: 16 mm Weight: 2.13 kg ECLASS: 21041716 ETIM: EC011973 Special features Material: zinc-plated with cast body Mounting: horizontal foot Category: Spanner Actuation: pneumatic FAQ What clamping and holding forces does the clamp provide? The clamp delivers a pneumatic thrust of 4,500 N and a maximum holding force of 8,100 N, offering secure fixation for medium-duty production tasks with the Kukamet 671 push-rod clamp. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and compact piston diameter make the unit suitable for integration into automated fixtures and handling systems, facilitating rapid cycle times and consistent clamping. What mounting options are available for this clamp? The unit features a horizontal-foot mounting that provides a stable, low-profile attachment to plates and fixtures for secure installation in jigs and assemblies. What materials and surface protection are used? The clamp body is cast and zinc-plated, which offers enhanced corrosion resistance and durability for workshop and industrial environments. How often is maintenance required? Maintenance is limited to routine inspection of seals and periodic lubrication; the robust construction reduces service frequency and keeps operating costs low. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Precision Pushrod Clamp M10x70 Horizontal Base 4,500N Hold 8,100N - Kukamet
Take advantage of strong clamping performance and a corrosion‑resistant cast construction to keep fixtures secure and downtime low; the combination of a galvanised cast body, 4,500 N clamping force and a horizontal foot mount ensures reliable results in jigs and assembly stations. Order the Kukamet 531 push‑rod clamp directly via Metav Werkzeuge or ask our consultants if needed. Kukamet 531 Push‑rod Clamp — Horizontal foot, M10×70 pressure spindle The 531 is a robust push‑rod clamp engineered for secure workpiece clamping in workshop fixtures and production jigs, offering a galvanised cast body and a horizontal foot mounting for stable integration. Galvanised cast body for corrosion resistance Max clamping force 4,500 N, holding force 8,100 N Horizontal foot mounting for stable fixture Pressure spindle M10×70, piston Ø16 mm Consistent clamping performance that stabilises production Built for repeatable operation, this push‑rod clamp provides a clearly defined clamping force and superior holding force, which together reduce slippage and rework. The specified 4,500 N clamping force gives a measurable basis for fixture design and cycle planning, while the 8,100 N holding force secures the component when external loads occur. The piston diameter of 16 mm supports predictable actuation dynamics; explaining these values in design terms helps technicians select the right clamp for target process forces and safety margins. Durable construction for long service life and low maintenance A galvanised finish combined with a sturdy cast body delivers corrosion resistance and mechanical stability in workshop environments. The surface treatment slows environmental wear, whereas the cast main body provides the mass and rigidity required for vibration damping in machining or assembly operations. This construction reduces the frequency of maintenance interventions and helps preserve alignment in long‑running fixtures, translating technical robustness into lower total cost of ownership for production equipment. Easy mounting and precise adjustment for fixture integration The horizontal foot mounting simplifies attachment to base plates and modular fixturing systems, allowing clamps to be positioned close to the workpiece without obstructing access. The integrated pressure spindle (threaded M10×70) enables fine preloading and rapid adjustment during set‑up, so fixtures can be dialled in quickly. These features shorten set‑up time and support faster changeovers, which is particularly valuable in small‑batch production and mixed‑model lines where flexibility and uptime are priorities. Practical reliability and design clarity for workshop use Designed with clear mechanical parameters and straightforward mounting, the clamp supports predictable fixture behaviour and safer handling. The combination of defined actuation geometry and a robust body means fewer surprises on the shop floor and greater confidence during handling and inspection. Where risk reduction and process stability matter, the measurable data and rugged design help justify the integration of this clamp into production tooling. Contact Metav Werkzeuge for specialist advice on fitting the Kukamet 531 push‑rod clamp into existing fixtures or for customised ordering and delivery options Technical data Article number: 531-4-Q16 GTIN: 8680731502824 ETIM: EC011973 eCl@ss: 21041716 Numeric specifications Clamping force max: 4,500 N Holding force max: 8,100 N Piston diameter: 16 mm Weight: 1.14 kg Pressure spindle: M10×70 Materials & features Galvanised finish with cast body Horizontal foot mounting Category: Push‑rod clamp (lever clamp) Manufacturer: Kukamet FAQ What maximum clamping force does this clamp deliver? The Kukamet 531 push‑rod clamp (SKU 531-4-Q16) provides a maximum clamping force of 4,500 N and a holding force of 8,100 N for secure fixturing. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the clamp has a horizontal foot mounting face for bolting directly to base plates or modular fixture components. Which spindle and adjustment are provided on the clamp? The clamp is fitted with a pressure spindle specified as M10×70 and a piston diameter of 16 mm for precise preload and straightforward adjustment. What materials and finish are used in the construction? The main body is cast and the component is galvanised to provide corrosion resistance and mechanical stability suitable for workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Pull Screw M8 for 16mm Clamping Diameter, DIN 6367 - TECWERK
Compact, standardised and reliable: the combination of an M8 thread, 20 mm head diameter and a 16 mm overall length ensures secure seating and compact assemblies for milling operations. Order the milling clamping screw directly via Metav Werkzeuge or request compatibility advice from our consultants. Milling clamping screw M8 for 16 mm clamping diameter – TECWERK (20 mm head, 16 mm length) The Milling clamping screw M8 for 16 mm clamping diameter is a standardised fastening element for securing cutters and adaptors in compact toolholders where repeatable concentricity and easy interchangeability are required M8 thread, compatible with standard collets Conforms to DIN 6367 for interchangeability Designed for clamping Ø 16 mm 20 mm head diameter, 16 mm overall length Consistent clamping for uninterrupted production The primary advantage of this clamping screw is its consistent mechanical interface: the M8 thread and adherence to DIN 6367 reduce setup time and minimise the risk of misfit between toolholders and cutters. This leads to fewer stoppages for re-tensioning and less variation in runout, supporting a smoother production flow. The component’s standardised geometry supports rapid replacement and compatible retrofit with many commercial toolholder systems, delivering a measurable improvement in operational efficiency. Compact dimensions that suit confined toolholders With an overall length L: 16 mm, head diameter D: 20 mm and head height K: 6 mm, this clamping screw is engineered for installations where space is limited. The compact proportions allow reliable force transmission without introducing protrusion that interferes with adjacent tooling. Explaining the key dimensions: L denotes the total length, D the head diameter and K the head height – each value informs the clearance and engagement depth required in the toolholder, making selection straightforward even for non-specialist workshop staff. Practical compatibility and workshop guidance Specified for a clamping Ø 16 mm, this fastening element is suited to common milling applications where a small, repeatable locating diameter is needed. Delivered in a single-piece packaging unit, it is intended for direct installation or as a stocked spare. The part is supplied under the TECWERK designation, which simplifies procurement and traceability in maintenance records. If further verification of fit is required, Metav Werkzeuge provides technical guidance and can confirm suitability against specific toolholder models. Request tailored advice from Metav Werkzeuge for TECWERK clamping components or arrange procurement and delivery from our Emmerich hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000834072NW Label: Milling clamping screw M8 for 16 mm clamping diameter TECWERK Product type: Fräsanzugsschraube (milling clamping screw) Dimensions / Core data Thread: M8 Head diameter (D): 20 mm Overall length (L): 16 mm Head height (K): 6 mm Suitable for clamping Ø: 16 mm Special features / Versions Conforms to DIN 6367 Packaging unit: 1 Brand: TECWERK UID: 2000834072NW FAQ Is this clamping screw compatible with my M8 toolholder? Compatibility depends on the toolholder’s conformity to standard DIN interfaces; the Milling clamping screw M8 for 16 mm clamping diameter follows DIN 6367, which supports interchangeability with compliant holders. What do the dimension codes L, D and K mean? L refers to the overall length (16 mm), D to the head diameter (20 mm) and K to the head height (6 mm); these values determine engagement depth and clearance in the toolholder. Can the screw be used for heavy-duty milling operations? The component is designed for secure clamping where the specified interface and dimensions match the application; refer to the toolholder manufacturer’s load limits to assess suitability with the Milling clamping screw M8. How is the product supplied and tracked? The item is supplied as a single piece (packaging unit 1) and identified by article number 2000834072NW for stock and maintenance tracking. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Push Rod Clamp 4.5kN Push Force, 8.1kN Holding Force, Zinc-Plated Cast Body M10x70 Spindle - Kukamet
Achieve consistent fixturing with a zinc‑plated cast body, a 4,500 N clamping force and an 8,100 N holding force for dependable production performance; order the clamp directly via Metav Werkzeuge or consult our specialists for application guidance. Push‑rod clamp 532 — Horizontal‑foot mount, 4,500 N clamping force (Kukamet) The Push‑rod clamp 532 is a compact horizontal‑foot clamping device designed for medium‑duty workshop and production fixturing, providing secure locating and repeatable holding for assembly and machining tasks. Zinc‑plated cast body for robustness 4,500 N maximum clamping force Horizontal foot for stable mounting M10x70 pressure spindle included Reliable clamping where it matters The clamp delivers a clear performance advantage through its 4,500 N maximum clamping force and an 8,100 N static holding force, ensuring workpieces remain stationary during machining or assembly. These measurable values make planning and fixture design straightforward: the specified forces correspond to defined safety margins, reducing the need for repeated re‑checks and minimising downtime. The device is suitable for repetitive operations where consistent clamp load is essential, and the compact construction contributes to efficient use of bench and fixture space. Robust construction for long service life Constructed with a zinc‑plated cast body, the unit combines corrosion resistance with mechanical strength; the surface treatment extends operational life in standard workshop environments. The 16 mm piston diameter provides predictable contact pressure progression, while the overall mass of 1.03 kg keeps the component easy to integrate into modular fixtures without adding excessive weight. This balance of durability and low mass reduces fixture inertia, helping to maintain machine dynamics and cycle reliability. Practical mounting and adjustment Equipped with a horizontal foot mounting arrangement and an M10x70 pressure spindle, the clamp allows secure attachment to flat fixture plates and tooling rails. The horizontal foot design aids alignment in confined setups and supports low‑profile installations. The standard M10x70 spindle permits straightforward spindle replacement or length adjustment to match workpiece contours, enabling precise positioning without specialised tooling. Application focus and workmanship benefits Engineered for medium‑duty clamping tasks, the unit supports a range of workshop applications including jigs, assembly fixtures and light machining operations. The lever‑style clamping concept—derived from classic toggle and push‑rod designs—translates to fast actuation and simple integration into manual and semi‑automatic processes. Specified numeric data facilitates planning and reduces uncertainty during fixture design, delivering an economic solution that preserves machining accuracy and operator confidence. Contact Metav Werkzeuge for tailored fixture advice and to secure the Kukamet push‑rod clamp 532 for reliable, repeatable clamping in your workshop. Technical data SKU: 532-4-Q16 GTIN: 8680731504460 eClass: 21041716 ETIM: EC011973 Facts Weight: 1.03 kg Maximum clamping force: 4,500 N Maximum holding force: 8,100 N Piston diameter: 16 mm Pressure spindle: M10x70 Special features Material: zinc‑plated with cast body Mounting: horizontal foot Typical design: lever‑style / push‑rod clamping FAQ What materials is the clamp suitable for? The clamp is designed for general workshop materials; the Push‑rod clamp 532 is primarily intended for metal and mixed‑material fixturing where medium‑duty clamping is required. Can the pressure spindle be replaced or adjusted? Yes. The M10x70 pressure spindle on the 532 allows for replacement or length adjustment to suit different workpiece heights. How does the holding force differ from clamping force? The 4,500 N value denotes the active clamping force during actuation; the 8,100 N figure refers to static holding capacity when the clamp is engaged and secured. Is the clamp suitable for automated or manual fixtures? The compact design and lever‑style actuation make the unit adaptable to both manual and semi‑automated fixtures; the 532 integrates well into modular clamping systems. What are the mounting requirements for stable operation? A flat fixture plate or tooling rail is required for the horizontal foot mounting; secure fastening ensures the specified forces are transmitted reliably. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Push Rod Clamp Horizontal Base 4.5kN Push Force, Zinc Coated Cast Body - Kukamet
Take advantage of the combination of robust construction, measurable clamping performance and compact installation to secure reliable workholding on the shop floor. Order the clamp directly via Metav Werkzeuge or consult the specialists for application advice. 535 push‑rod clamp (SKU 535-4-Q16-R) — horizontal base, 4.5 kN clamping force (Kukamet) The 535 push‑rod clamp is a horizontal‑base workholding element designed for light to medium industrial clamping tasks, offering repeatable force and compact integration for fixtures and jigs. Horizontal base for stable mounting 4.5 kN clamping force for secure hold Galvanised cast body resists corrosion M10x70 pressure spindle for fine adjustment Consistent clamping for repeatable production A predictable clamping result is essential in series work. The clamp delivers a clamping force of 4.5 kN and a holding force of 4.7 kN, figures that translate directly into repeatable part fixation and reduced rework. These measurable values support process control and enable planning of fixture stresses. The internal piston with Ø 16 mm provides the mechanical basis for stable actuation, while the specified forces make it straightforward to calculate safety margins for a given setup. Durable construction built for shop‑floor conditions Long service life on the shop floor is achieved through the galvanised finish and a cast body that absorb mechanical wear and resist typical workshop corrosion. The material choice reduces maintenance intervals and keeps clamping surfaces stable under load, which benefits uptime and total cost of ownership. Mass and balance are optimised for handling—at 1.03 kg the unit is light enough for fixture assembly but substantial enough to remain secure during operation. Compact footprint and simple integration into fixtures A horizontal base allows direct mounting to plates or tooling blocks without additional adaptors, saving space inside jigs and reducing assembly time. The clamp’s compact dimensions and standard thread interfaces mean it can be positioned close to the workpiece for short lever arms and minimal deflection. The M10x70 pressure spindle permits accurate contact positioning and compensates for small height variations in workpieces, simplifying alignment during set up. Fast adjustment and reliable operation for daily use Adjustment is achieved via the pressure spindle, enabling controlled contact pressure and quick re‑setting between jobs. The mechanical design supports frequent actuation while keeping behaviour consistent over cycles; this reliability shortens changeover times and supports higher throughput. The clamp’s specifications are suitable for a broad range of fixtures, from single‑station jigs to modular fixturing systems, where predictable clamping behaviour improves overall process stability. For robust, shop‑ready clamping from Kukamet, contact Metav Werkzeuge for supply and application guidance: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 535-4-Q16-R GTIN: 8680731504217 ECLASS: 21041716 ETIM: EC011973 Facts Clamping force (max): 4500 N Holding force (max): 4700 N Piston diameter: 16 mm Pressure spindle: M10x70 Weight: 1.03 kg Special features Mounting: horizontal base Material: galvanised with cast body Brand: Kukamet FAQ What applications suit this clamp best? The 535 push‑rod clamp is suitable for light to medium industrial fixtures where repeatable fixation is required; its 4.5 kN clamping capacity matches many general machining and assembly tasks. How is the clamp adjusted to different part heights? Adjustment is made via the M10x70 pressure spindle, which allows fine positioning of the contact point and compensation for height differences during setup. Can the clamp withstand shop‑floor conditions? Yes. The galvanised cast body provides resistance to corrosion and wear, making the clamp appropriate for regular use in workshop environments. Is the clamping force measured or calculated? The stated values (4500 N clamping, 4700 N holding) are the manufacturer’s technical figures for the unit and can be used for fixture design and safety margin calculations. Does the clamp require specific mounting hardware? The clamp is designed for horizontal‑base mounting to standard tooling plates; the required fasteners depend on the fixture design and are not included. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Push Rod Clamp Horizontal Base 4.5kN Thrust, 6.65kN Hold, Zinc-Plated - Kukamet
Take advantage of the combination of high clamping performance, galvanised corrosion resistance and compact design for reliable fixture integration — the 521 Push‑rod clamp delivers secure workholding with a small installation footprint. Order the push‑rod clamp directly via Metav Werkzeuge or ask our consultants if additional technical details are required. 521 Push‑rod clamp by Kukamet — 4.5 kN pressing force, galvanised 521 Push‑rod clamp for horizontal mounting, engineered to provide consistent clamping and high holding capacity in jigs and fixtures 4.5 kN pressing force capacity 6.65 kN maximum holding force Galvanised for corrosion resistance Horizontal-foot mounting for simple integration Consistent force for reliable production The 521 Push‑rod clamp offers a defined 4,500 N pressing force and a 6,650 N holding force, ensuring repeatable clamping across cycles. Defined force values translate into predictable part retention, which reduces rework and minimises downtime in repetitive production tasks. The difference between pressing and holding forces is clarified: pressing force denotes the active application when the actuator is operated, while holding force indicates the clamp's passive resistance once engaged — both figures inform fixture design and safety margins. Compact mounting that speeds assembly With a horizontal foot mounting and an M10x70 actuating spindle, this clamp integrates cleanly into bespoke jigs and modular fixture plates. The unit's 0.81 kg mass keeps added inertia low, simplifying handling during assembly and reducing load on fixture supports. Where space is limited, the compact footprint allows closer packing of clamps without compromising access for loading and unloading, supporting efficient flow in manual and semi‑automated production cells. Robust finish for workshop longevity Constructed from galvanised steel, the clamp resists corrosion in typical workshop environments and requires minimal surface care. The protective coating prolongs service life in stamping, assembly and general clamping applications, which reduces total cost of ownership through lower replacement frequency. Simple mechanical design and standard spindle sizing mean maintenance is straightforward; worn spindles and fasteners can be serviced with common workshop tools, keeping uptime high. For reliable fixture clamping with proven holding figures, request further specification or procurement support from Metav Werkzeuge — Metav's advisers can confirm suitability and integration options for the Kukamet 521 Push‑rod clamp, SKU 521-4-Q16 Technical data SKU: 521-4-Q16 GTIN: 8680731502770 EClass: 21041716 ETIM: EC011973 Facts Max pressing force: 4,500 N Max holding force: 6,650 N Piston diameter: 16 mm Weight: 0.81 kg Materials & features Material: Galvanised steel Mounting: Horizontal foot Actuating spindle: M10x70 FAQ What is the maximum pressing force of this clamp? The maximum pressing force is 4,500 N for the 521 Push‑rod clamp, which defines the active clamping capability when the spindle is actuated. What holding force can be expected after actuation? The 521 Push‑rod clamp provides a maximum holding force of 6,650 N, representing the passive resistance once clamped. How is the clamp mounted in a fixture? The clamp is designed for horizontal‑foot mounting, allowing secure attachment to fixture bases and plates. What material and finish does the clamp have? The 521 Push‑rod clamp is made from galvanised steel, offering enhanced corrosion resistance for workshop use. Which actuating spindle does the clamp use? The clamp is fitted with an M10x70 actuating spindle, compatible with common threaded adjustment and locking hardware. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Push Rod Clamp Horizontal Foot 4,500N Push Force 8,100N Holding Force Galvanised Cast Body - Kukamet
Take advantage of the combination of robust clamping performance and low-maintenance construction to keep fixtures secure and production running smoothly — order the 536 push‑rod clamp directly via Metav Werkzeuge or contact the consultants for specification support. 536 Push‑rod clamp — horizontal foot, 4.5 kN clamping force (Kukamet) The 536 push‑rod clamp is a horizontal‑mounting workholding element designed for secure clamping in fixtures and jigs, delivering reliable force control for repetitive machining or assembly tasks. Compact horizontal foot design Clamping force 4.5 kN, holding force 8.1 kN Galvanised cast body for durability M10x70 pressure spindle specification Secure clamping where repeatability matters The push‑rod design provides a clear, linear force transfer: 4.5 kN clamping force with a holding force of 8.1 kN ensures stable retention of components during machining or assembly. A piston Ø 16 mm converts actuation into consistent pressure, reducing positional drift in repetitive operations. This type of clamp is suited for production where constant cycle times and reproducible clamping are required, enabling process planners to predict fixture behaviour and maintain throughput. Durable build reduces downtime and servicing Constructed with a galvanised, cast body, the unit resists corrosion in workshop environments while offering structural rigidity under lateral loads. The moderate mass of 1.03 kg balances robustness with ease of handling when fitting into modular fixtures. A corrosion‑resistant finish and a compact frame lower maintenance frequency, contributing to longer service intervals and fewer unplanned stoppages in the production chain. Simple integration into existing fixtures and jigs The horizontal foot mounting enables straightforward attachment to tooling plates and baseplates used in standard workholding setups. The M10x70 pressure spindle supplies a defined contact point, compatible with common threaded receiver holes. Installation requires common workshop tooling and no specialised adaptation; the clamp can be placed in line with other workholding elements for compact fixture design and predictable force vectors. Practical value for industry and trade Designed for machine shops, fixture builders and maintenance departments, this clamp delivers dependable performance without complex controls. The compact geometry and defined thread interface make it suitable for retrofits as well as new jig designs. Metav’s distribution and quality control in Emmerich add a layer of supply reliability and technical assurance for purchasing departments that prioritise consistent delivery and verified product condition. Secure fixtures efficiently with Kukamet’s 536 push‑rod clamp—contact Metav Werkzeuge for application matching and reliable supply from Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 536-4-Q16 GTIN: 8680731504927 eClass: 21041716 ETIM: EC011973 Facts Clamping force (max): 4,500 N Holding force (max): 8,100 N Piston diameter: 16 mm Pressure spindle thread: M10x70 Weight: 1.03 kg Special features Horizontal foot mounting Galvanised finish with cast body Workholding element for fixtures and jigs Category: Spanner / clamp FAQ What is the maximum clamping force of this clamp? The 536 push‑rod clamp provides a maximum clamping force of 4.5 kN, with a holding force rated at 8.1 kN. Is the clamp suitable for use in machine‑shop environments? Yes — the galvanised cast body and compact horizontal‑foot design make the clamp suitable for standard machine‑shop fixtures and jigs. Which pressure spindle does the unit use? The unit is supplied with an M10x70 pressure spindle, providing a standard threaded contact for integration into tooling plates. How heavy is the clamp and how does that affect installation? The clamp weighs 1.03 kg, which permits easy handling during fixture assembly while retaining sufficient mass for stable clamping under load. Can this clamp be combined with other workholding elements? The horizontal mounting and standard spindle thread allow the clamp to be incorporated alongside other workholding components in modular fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Quick-Change Insert SE 16mmx12mm Gr.2 for DIN 374/376 M20, 12mm Square Shaft - TECWERK
Benefit from reliable torque transfer via a 12 mm square shank and the time-saving quick-change clamping design; order the Quick-change insert directly via Metav Werkzeuge or ask our specialists for application advice. Quick-change insert SE 16 mm × 12 mm (Size 2) — for DIN 374/376 M20 tapping, 12 mm square shank (TECWERK) A Quick-change insert SE 16 mm × 12 mm (Size 2) designed to secure taps in quick-clamping holders for standard DIN 374/376 M20 threading operations, offering a compact and robust connection between tap and toolholder Quick-change design for fast tool swaps Torque transmission via 12 mm square shank Compatible with DIN 374/376 M20 tapping Reduce setup times with a true quick-change system The insert's quick-change configuration is engineered to shorten tool changeover times in series production and maintenance tasks. By holding taps in a dedicated quick-clamping device, the design eliminates repeated manual tightening and adjustment, resulting in consistent positioning and rapid exchange. This saves machine downtime and boosts throughput without compromising thread quality — a pragmatic solution for workshops and toolrooms where cycle time and repeatability matter. Secure torque transfer through a square shank interface Torque transmission is handled via the 12 mm square shank, which provides a positive mechanical drive between holder and tap. This form-fit connection reduces the risk of slippage under load and ensures reliable rotational force for cutting threads to DIN 374/376 M20 standards. For users unfamiliar with the standard: DIN 374/376 define dimensions and tolerances for taps and corresponding fittings, meaning the insert supports established industrial threading practices and consistent results across batches. Modular integration for diverse shank requirements The insert is part of a modular concept in which different shank sizes are accommodated by matching inserts, allowing existing quick-change holders to be adapted rather than replaced. The absence of a safety coupling in this variant simplifies the mechanical interface and keeps the arrangement compact; where a protective shear feature is required, a different insert version should be selected. This modularity makes the solution suitable for production lines that require flexible tooling options while keeping inventory manageable. Practical suitability for workshop and industrial use Designed as a Size 2 insert, the component combines compact external dimensions with sturdy internal geometry, making it appropriate for confined setups and straightforward toolholder systems. The product supports efficient tapping workflows, particularly where rapid tool exchange and reliable torque transfer contribute directly to product quality and process economy. Where exact fit and minimal axial runout are essential for thread accuracy, the insert’s precise contact geometry helps maintain tolerances and reduce scrap rates. For secure, fast-change tapping in DIN-standard systems, choose the TECWERK Quick-change insert SE 16 mm × 12 mm (Size 2) — contact Metav Werkzeuge for tailored advice or to arrange supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number (SKU): 4000832648NW Product: Quick-change insert SE Size/Type: Size 2 Brand: TECWERK Suitable for: DIN 374/376 M20 Core data Diameter (D): 48 mm Face diameter (D1): 31 mm Insert diameter: 16 mm Square shank: 12 mm L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm Special features No safety coupling Taps held by quick-clamping device Torque transmission via shaft square Different inserts required for different shank sizes FAQ What thread standard does this insert support? The quick-change insert is designed for use with taps conforming to DIN 374/376 M20 and provides the correct interface for standardised tapping operations. Which shank size transmits torque with this insert? Torque transmission is achieved via the 12 mm square shank; the insert ensures a positive drive between tap and holder. Is a safety coupling included with this variant? This Size 2 insert is supplied without a safety coupling; the configuration focuses on compactness and direct torque transfer. Can this insert be used in modular quick-change systems? Yes, the insert is intended for modular quick-change holders where matching inserts accommodate different shank dimensions. What are the key external dimensions to check for fitment? Relevant dimensions include the outer diameter of 48 mm, face diameter 31 mm and overall length values L1 32 mm, L4 35 mm for correct integration. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm Quick-Change Insert SES 12mm Square for DIN 374/376 M20, Adjustable Torque-Limiting Safety Clutch - TECWERK
Take advantage of the combination of reliable torque control and a compact, service-friendly design to reduce tap breakage and maintain production flow. Order the SES quick-change insert directly via Metav Werkzeuge or consult the team for compatibility and sizing advice. TECWERK SES Quick-change Insert 16 mm x 12 mm, Size 3 — for DIN 374/376 M20 The SES Quick-change Insert 16 mm x 12 mm (Size 3) is a tap-holder insert with an adjustable safety coupling for torque limitation, engineered for use with DIN 374/376 M20 taps. Adjustable safety coupling for torque limitation Prevents tap breakage during threading Torque transmission via 12 mm square shank Compatible with DIN 374/376 M20 taps Reduce unplanned downtime with torque-limited tapping The insert’s core benefit is its adjustable safety coupling, which limits torque to protect taps from overload and breakage. By decoupling at a pre-set torque, the device prevents sudden tool failure that would otherwise halt production and require rework. This feature translates into measurable savings in machine uptime and reduces the need for frequent tap replacements, supporting a more predictable workflow in small-scale workshops and industrial departments alike. The design focuses on operational reliability rather than complex user adjustments, so the torque-limiting function is effective without adding setup overhead. Reliable torque transfer with a clear mechanical interface Torque is transmitted via the 12 mm square shank, providing a direct, positive drive path that minimises backlash and ensures consistent torque delivery to the tool. The insert is specified for a 16 mm diameter interface and configured for DIN 374/376 M20, making it suitable for standard metric tapping applications. The mechanical dimensions — L3: 41 mm, L4: 55.5 mm, L5: 45 mm, D: 72 mm, L1: 45.2 mm, D1: 48 mm — allow planners to assess axial and radial space requirements quickly. For users less familiar with these codes: the square shank is the connection that mates with the tapping machine or holder, and the clear dimensional data helps ensure a correct fit without trial-and-error. Straightforward integration and service-friendly swap-outs The insert is intended as part of a modular quick-change system: different inserts are used for differing shank sizes, enabling rapid changeovers between operations and minimising setup time. The unit’s construction allows simple replacement of the insert when a different shaft size is required, and the torque setting can be adjusted to match the hardness and thread depth of the workpiece material. This modular approach supports flexible shop-floor planning and reduces tool inventory complexity while maintaining consistent process safety across varied tapping tasks. Contact Metav Werkzeuge today to confirm the correct SES insert for the tapping application and benefit from personalised technical advice and reliable supply from Emmerich. Technical details Article number: 4000832687NW Product: SES Quick-change Insert Size: 3 Brand: TECWERK Facts Diameter: 16 mm Square shank: 12 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm Compatible standard: DIN 374/376 M20 Packaging unit: 1 Special features Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via shaft square Suitable for standard metric tapping (DIN 374/376 M20) Requires different inserts for different shank sizes FAQ What is the purpose of the adjustable safety coupling on the SES insert? The adjustable safety coupling in the SES Quick-change Insert provides torque limitation to avoid tap breakage by slipping or decoupling when a preset torque is exceeded. Is the insert compatible with standard M20 taps? Yes, the TECWERK SES Quick-change Insert 16 mm x 12 mm (Size 3) is specified for use with DIN 374/376 M20 taps. Which shank size does this insert accept and how is torque transmitted? Torque is transmitted via a 12 mm square shank; the insert is designed for a 12 mm square connection to deliver positive drive to the tap. Can the SES insert be adjusted for different materials or thread depths? The torque setting on the SES insert can be adjusted to match different material hardnesses and thread depths, helping to protect taps during varying machining conditions. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm Quick-Change Insert SES 12mm Square Shank for DIN 374/376 M20, Adjustable Safety Clutch - TECWERK
Take advantage of the adjustable safety coupling and the robust 12 mm square torque transmission to reduce tap breakage and maintain uninterrupted production. Order directly via Metav Werkzeuge or consult our specialists for application advice and fitting options. Quick-change insert SES 16 mm x 12 mm, Size 2 – for DIN 374/376 M20 (TECWERK) A quick-change insert SES designed for M20 thread tapping that reduces tool breakage with an adjustable safety coupling and simple square-shank torque transfer Adjustable safety coupling for torque limit Prevents tap breakage during operation Torque transmitted via 12 mm square shank Compatible with DIN 374/376 M20 taps Reduce tap breakage and keep production running The adjustable safety coupling built into this quick-change insert acts as a mechanical torque limiter, allowing a controlled slip before a tap is overloaded. This feature significantly reduces the risk of tap breakage, which otherwise causes unplanned downtime and difficult rework. The torque is transferred directly through the 12 mm square shank, ensuring a positive connection between holder and tap and reliable power transmission under intermittent loads. For machining operations that require consistent thread quality, the combination of torque control and firm drive engagement supports predictable cycle times and fewer tool-change interruptions. Speed up changeovers and simplify tool handling The SES design supports rapid interchange of the tapping adapter, accelerating set-up and reducing non-productive time in small-batch and mixed-production environments. The insert’s geometry is prepared for use with standard M20 taps specified by DIN 374/376, making selection straightforward for maintenance and operations teams. Clear overall dimensions such as L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm, L1: 32 mm and D1: 31 mm help to confirm fit in existing holders and machine spindles. Where different shank sizes are used, matching inserts are available to maintain correct alignment and secure clamping without compensating fixtures. A practical component for workshop reliability Designed for routine industrial use, the insert focuses on practical benefits: repeatable torque behaviour, simplified inventory through standard compatibility, and reduced scrap rates due to broken taps. The adapter’s specification supports workshops and production lines that prioritise uptime and repeatable thread integrity. For procurement, the part is supplied as a single unit and integrates with established tool control practices; documentation of the adapter’s mechanical limit behaviour aids risk assessments and process planning in quality-conscious operations. For reliable torque protection and faster changeovers, choose the TECWERK quick-change insert and contact Metav Werkzeuge for application-specific advice and supply options Technical data Article number / SKU: 4000832682NW Product: Quick-change insert SES, Size 2 Compatible with: DIN 374/376 M20 Square drive: 12 mm Diameter: 16 mm Packaging unit: 1 Core data Diameter D: 16 mm Square drive: 12 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D1: 31 mm Special features Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via the shaft square Requires matching insert for differing shank sizes FAQ What is the primary function of this quick-change insert? The quick-change insert SES 16 mm x 12 mm (TECWERK, SKU 4000832682NW) provides controlled torque limitation via an adjustable safety coupling to prevent tap breakage during M20 tapping operations. Which taps is the insert compatible with? Compatibility is with taps conforming to DIN 374/376 for M20; the insert is designed to work directly with those standard thread taps when used with the correct holder. How does the torque limitation work in practice? The insert’s adjustable safety coupling slips at a preset torque, protecting the tap from overload while the 12 mm square drive maintains reliable torque transmission until the limit is reached. Are there dimensional details to check before ordering? Yes; relevant dimensions include L1: 32 mm, L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm and D1: 31 mm — these determine fit with existing holders and spindles. Is the insert supplied individually or in sets? The product is supplied as a single unit (packaging unit 1), allowing tailored stocking and replacement practices. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com