Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
16mm Reducing Sleeve Form 2 For 32mm Bore, Hardened And Ground, L56mm - TECWERK
Take advantage of the combination of a hardened and ground design and precise dimensional fit to secure reliable clamping and repeatable results in production. The adapter sleeve supports stable toolholding with a 16 mm bore and 32 mm outer diameter, reducing set-up variability. Order the reducing bushing directly via Metav Werkzeuge or contact our consultants for tailored advice. TECWERK Reducing Bushing Form 2 — 16 mm bore, 32 mm outer diameter The TECWERK reducing bushing Form 2 is a hardened, ground adapter sleeve designed to mount 16 mm drill shanks into 32 mm drill-bar holders (Form E 2) for precision machining applications. Hardened and ground for precision fit Bore Ø 16 mm for standard drill shanks Outer Ø 32 mm, clamping length 56 mm Consistent clamping quality for reliable production The hardened and ground finish ensures a precision fit that minimises axial and radial play during machining. By using a sleeve treated for hardness and surface accuracy, the clamping interface achieves improved repeatability and lower runout compared with untreated fittings. This leads to fewer reworks and steadier process capability, which supports higher first-pass yields in repetitive drilling and reaming tasks. Clear dimensional fit for seamless integration With a defined 16 mm internal diameter, 32 mm outer diameter and a clamping length of 56 mm, the adapter sleeve provides a straightforward mechanical match to Form E 2 drill-bar holders. The clear dimensional specification simplifies tool selection and inventory management: items can be identified by bore and outer diameters, enabling quick verification during set-up and reducing the risk of installing incorrect adapters that would compromise accuracy. Enhanced durability through thermal and surface treatment Because the sleeve is hardened and ground, surface wear is reduced and the contact surfaces retain their form under repeated clamping cycles. The surface finish contributes to even force distribution across the clamped shank, which in turn lowers the likelihood of fretting and localised deformation. These properties extend service intervals and support consistent performance across shifts, making the component suitable for demanding workshop and industrial environments. Practical benefit: faster set-up, steady operation The dimensional clarity and robust surface treatment of the sleeve shorten alignment and replacement times at the machine, helping to reduce overall setup time and interruptions to the machining cycle. By standardising on precision adapter sleeves, maintenance routines become simpler and the team benefits from greater repeatability in tool positioning. This practical efficiency contributes directly to a smoother production flow and predictable output. For dependable toolholding choose the TECWERK reducing bushing — contact Metav Werkzeuge for procurement and expert guidance from Emmerich to ensure exact compatibility with existing holders and tool stacks. Technical Data Article number: 2000834215NW Label: Reduzierbuchse Form 2 Bohrungs-D.16mm AD 32mm Einspann-L.56mm TECWERK Manufacturer: TECWERK Facts Bore diameter: 16 mm Outer diameter: 32 mm Clamping length L: 56 mm Form: 2 Packaging unit: 1 UID: 2000834215NW Special features Hardened and ground For drill shank holders Form E 2 Product type: Reducing bushing FAQ What bore and outer diameters does the reducing bushing provide? The TECWERK reducing bushing (SKU 2000834215NW) provides a 16 mm bore and a 32 mm outer diameter with a clamping length of 56 mm. Which holder type is this sleeve compatible with? This adapter sleeve is specified for use with drill-bar or drill shank holders of Form E 2 and is intended to adapt 16 mm shanks to a 32 mm holder seat. Does the sleeve offer enhanced wear resistance? Yes, the sleeve is hardened and ground; this heat treatment and surface finish improve wear resistance and help maintain clamping accuracy over repeated cycles. Can the reducing bushing be used for high-precision drilling tasks? The dimensional accuracy and hardened, ground finish make the reducing bushing suitable for precision machining where secure, repeatable clamping is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Rubber Flex Collet for VTA7 Threading Attachment, Suitable Ø2.5–Ø4.5mm - Vertex
Robust performance and reduced vibration result from the combination of the rubber-flex design, a 16 mm diameter and a compact 11 mm length, delivering secure gripping for threading operations. Order the matching FC-10 collets directly via Metav Werkzeuge or consult our advisors for specification support. Rubber-Flex collets FC for threading unit VTA7 — 16 mm diameter, Vertex A Rubber-Flex collet engineered for the VTA7 threading unit, providing secure, low-vibration clamping for small threaded parts in precision workshops. Compatible with VTA7 threading unit 16 mm diameter for stable grip 11 mm compact length for rapid setup Rubber-flex design reduces vibration Consistent clamping for reliable threading results The rubber-flex collet design combines elasticity with firm contact to maintain secure clamping even under intermittent loads. With a 16 mm diameter, the unit is dimensioned to stabilise small workpieces and reduce slippage during rotation, which improves thread quality and reduces rework. The elastic surface also offers vibration damping, lowering the risk of chatter and supporting steadier machining parameters, an advantage for shops aiming to maintain throughput without sacrificing finish. Rapid integration with existing threading equipment Engineered for straightforward installation in the VTA7 threading unit, the collet’s 11 mm length minimises overhang and helps preserve tool-to-work alignment during set-up. Compatibility with precision gauges (Ø2.5–Ø4.5 mm) assists in fast centring and verification of clamping performance. The compact form factor therefore contributes to reduced set-up time and predictable process behaviour, enabling technicians to keep cycle times tight while retaining control over concentricity and runout. Gentle handling for delicate and finished parts The elastomer contact surface protects component surfaces where metal-to-metal clamping would leave marks. This workpiece protection is particularly useful when handling soft or plated parts and when post-process inspection criteria are stringent. The collet’s flexible grip also accommodates minor diameter variations without the need for frequent retooling, adding practical versatility for small-batch and mixed-run production. Reliable sourcing and workshop support Produced under the Vertex name, these collets follow established precision standards and are supplied with clear identifiers for inventory and procurement. Metav Werkzeuge acts as a European quality filter and distribution partner, offering access to a broad range of precision products that reduce the need for multiple suppliers. The combination of manufacturer provenance and centralised supply supports consistent workshop availability and traceable procurement for maintenance planning. For availability of Vertex FC-10 rubber-flex collets for the VTA7 threading unit and expert advice on integration, contact Metav Werkzeuge in Emmerich for tailored supply and specification guidance Technical data Article number: FC-10 GTIN: 4061905084355 ECLASS: 21041712 Core measurements Diameter: 16 mm Length: 11 mm Suitable for precision gauges: Ø2.5–Ø4.5 mm Applications / Features Compatible with VTA7 threading unit Rubber-flex design for secure gripping Compact form for threading operations FAQ Which machines are these collets compatible with? The collets are specified for the VTA7 threading unit and suit installations where compact, low-vibration clamping is required. What clamping diameter and range apply? The main body is 16 mm in diameter; suitability for precision gauges is stated as Ø2.5–Ø4.5 mm. Are these collets suitable for delicate threads and finished surfaces? Yes. The rubber-flex contact surface provides workpiece protection and reduces marking on softer or plated components. How long is the collet and how does that affect setup? The collet length is 11 mm, a compact dimension that reduces overhang and helps preserve alignment during set-up. What identifiers should be used for ordering and inventory? Use SKU FC-10 and GTIN 4061905084355 for procurement and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16mm Rubber Flex Collets For VTA7 Threading Attachment, Ø4.5‑Ø6.5mm - Vertex
Take advantage of the Rubber-Flex design and proven compatibility with the VTA7 thread-cutting apparatus to secure consistent clamping for small-diameter tools. The flexible collet supports tool shank diameters Ø4.5–Ø6.5 mm and integrates easily into established workshop workflows — order the component directly via Metav Werkzeuge or consult our specialists for application advice. FC-11 Rubber-Flex collet — Flexible clamping for VTA7 thread cutter (Ø4.5–Ø6.5 mm) FC-11 Rubber-Flex collet for flexible clamping of small-diameter tool shanks, made for use with the VTA7 thread-cutting apparatus Flexible Rubber-Flex clamping concept Compatible with VTA7 thread-cutting apparatus Suitable for Ø4.5–Ø6.5 mm shanks Consistent, precision clamping for fine-thread operations The Rubber-Flex collet is engineered to provide consistent clamping for delicate threading and finishing tasks. Its adaptable gripping mechanism reduces play without adding complex adjustment procedures, delivering reliable concentricity for small external diameters. For operations where runout and alignment affect thread quality, this clamping sleeve offers a straightforward way to improve repeatability and reduce scrap rates. The result is a measurable improvement in process stability for bench and light-production environments. Seamless fit with the VTA7 system and common tool shanks Designed specifically for use with the VTA7 thread-cutting apparatus, this clamping solution ensures straightforward installation and interchangeability within the VTA7 toolholding system. The device accommodates tool shank diameters Ø4.5–Ø6.5 mm, which covers many standard taps, small cutters and mandrels used in fine machining. Compatibility with the VTA7 simplifies inventory management and minimises conversion time during setup, supporting smoother changeovers and more predictable throughput. Practical workshop benefits that reduce downtime Adopting this flexible collet can shorten preparation times and lower the need for frequent adjustments. The adaptable grip compensates for minor diameter deviations, so a single clamping unit can serve multiple close-tolerance shanks without frequent replacement. This characteristic supports operational efficiency and helps maintain production rhythm in repair shops and specialist threading stations. The compact design keeps the tool envelope small, aiding access where space is limited. Designed for fit, not complexity The component focuses on functional compatibility rather than extraneous features: straightforward geometry and a targeted diameter range make it easy to integrate into existing setups. Maintenance is limited to routine inspection and cleaning; there are no elaborate service procedures. By concentrating on core functionality, the design keeps handling intuitive and reduces the training required for machine operators and technicians. For ordering or tailored application advice regarding the FC-11 Rubber-Flex collet for VTA7, contact Metav Werkzeuge — Metav’s specialists can confirm fitment and supply from their Emmerich hub Technical data Article number: FC-11 GTIN: 4061905094859 ECLASS: 21041712 Length: 11 Diameter: 16 Facts Fits shank diameters Ø4.5–Ø6.5 mm Designed for VTA7 thread-cutting apparatus Brand: Vertex Special features Rubber-Flex clamping concept Category: Vertex collet accessory SKU: FC-11 FAQ What shank diameters does this collet accommodate? The FC-11 Rubber-Flex collet accommodates shank diameters in the range Ø4.5–Ø6.5 mm, providing a focused solution for small-diameter tooling. Is this component compatible with VTA7 thread-cutting equipment? Yes. The FC-11 is designed specifically for use with the VTA7 thread-cutting apparatus and integrates with that toolholding system. Can the FC-11 compensate for small diameter variations? The Rubber-Flex concept used in the FC-11 provides an adaptable grip that helps compensate for minor diameter variations, improving grip reliability for similar-sized shanks. What practical advantages does this collet offer in a workshop? By reducing the need for frequent adjustments and enabling quick changeovers within the VTA7 system, the FC-11 supports steadier throughput and fewer interruptions during fine threading tasks. Which brand manufactures this clamping accessory? This collet is supplied by Vertex and sold under the FC-11 designation as a clamping accessory for VTA7 thread-cutting systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16mm T-Nut 14mm M12 with Strength Class 10, DIN 508 - AMF
Robust, standardised clamping for 14 mm T-slots with a compact 16 mm profile and M12 thread delivers dependable fixation and simple interchangeability; use the secure strength class 10 design for demanding workholding. Order the T-slot nut directly via Metav Werkzeuge or ask our consultants if needed. T-slot Nut DIN 508 T‑Slot 14 mm M12 AMF — compact 16 mm height, M12 thread A T-slot Nut DIN 508 T‑Slot 14 mm M12 AMF designed for secure, standard-compliant clamping on machine tables and clamping fixtures. DIN 508 standard conformity For 14 mm T-slots M12 threaded connection Strength class 10 clamping security Consistent, standard-compliant workholding for production Compliance with DIN 508 ensures predictable fitting and interchangeability across a wide range of machine tables and fixtures. The combination of a 14 mm T-slot profile with an M12 thread provides a balance between compact size and mechanical strength, allowing straightforward integration into existing setups. This standard-based approach reduces setup time and minimises the risk of mismatched components, supporting smoother production flows and fewer interruptions in clamping operations. Low-profile design that aids compact assemblies The 16 mm height offers a low-profile solution where space above the T-slot is limited. This compact build helps maintain a low centre of gravity for clamped parts and permits closer stacking of clamping elements, which is useful in multi-fixture arrangements or when working with tall workpieces. The narrow profile also simplifies access for spanners and torque tools while keeping the clamping point stable, enabling efficient use of available table space without sacrificing hold. Secure threaded connection for repeatable clamping An M12 threaded interface combined with a strength class 10 rating gives a high clamp-force capability relative to the component size. This means reliable fixation under cyclical loads and during machining operations where forces can vary. The numeric parameters A: 13.7, E: 22 and K: 8 describe the critical contact and installation dimensions that determine how the nut seats in the slot and how load is distributed; such detail supports predictable torque settings and safer, repeatable clamp results. Interchangeability, traceability and industrial suitability Marked by a clear label and SKU, the component is suitable for systematic inventory and maintenance procedures. The standard format eases replacement and stocking decisions in workshops and production facilities that favour modularity. For procurement and quality assurance, the SKU 4000833204NW and brand AMF provide traceability for parts lists and servicing, while the packaging unit of 1 simplifies single-item supply for targeted repairs or adjustments. Choose the AMF T-slot nut for standardised, high-strength clamping and contact Metav Werkzeuge for fast supply and expert advice from Emmerich Technical Data Article number: 4000833204NW Label: T-Nutenstein DIN 508 T-Nut 14mm M12 AMF Brand: AMF Product type: T-Nutenstein Facts Height: 16 mm T-slot width: 14 mm Thread: M12 A: 13.7 mm E: 22 mm K: 8 mm Strength class: 10 Packaging unit: 1 Special features DIN 508 compliance Compact low-profile design Threaded M12 connection Traceable SKU for procurement FAQ Is this component compatible with 14 mm machine T-slots? Yes. The T-slot nut conforms to DIN 508 and is specified for 14 mm T-slots, making it compatible with standard 14 mm slot profiles. What thread size does the nut use and what does that mean for clamping? The nut features an M12 thread; combined with strength class 10, this allows higher clamp forces compared with smaller threads, improving fixation during machining. What are the key installation dimensions to check? Relevant dimensions include A: 13.7 mm, E: 22 mm and K: 8 mm, which determine seating and load distribution in the T-slot and influence torque and engagement depth. Can the part be identified for ordering and maintenance? Yes. The item is listed under SKU 4000833204NW and labelled as T‑Nut 14mm M12 by AMF, facilitating procurement and inventory control. Is this suitable for heavy-duty industrial use? The strength class 10 rating and M12 thread indicate suitability for demanding clamping tasks where reliable fixation and repeatable torque behaviour are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Bolt M16 L125mm Grade 8.8, DIN 787 - AMF
Benefit from standardised fittings and consistent load capacity thanks to DIN 787 compliance and strength class 8.8; the combination of M16 threading and a 125 mm overall length delivers reliable clamping in 16 mm T‑slots. Order the T‑slot screw directly via Metav Werkzeuge or consult our specialists for specification advice. T‑slot screw (DIN 787) – M16, 16 mm T‑slot, L 125 mm, AMF T‑slot screw (DIN 787) designed for secure clamping in 16 mm T‑slot machine tables and fixtures DIN 787 standard compliance Fits 16 mm T‑slots M16 metric thread Strength class 8.8 Precise fit and repeatable clamping for machine tooling The DIN 787 specification ensures a repeatable, industry‑standard interface between the fastener and the table T‑slot, making installation straightforward and replacement predictable. With a 16 mm T‑slot designation and an M16 threaded shank, this fastener is intended for use where exact positional control and reliable shear performance matter. Engineers benefit from predictable geometry, reducing setup time and minimising downtime during fixture changes. Durable clamping performance under load Rated strength class 8.8, the fastener provides a balance of tensile strength and ductility suitable for many clamping scenarios on production equipment. The nominal overall length of 125 mm gives sufficient thread engagement for thick fixtures or stacked workpieces while maintaining a compact profile in the slot. Dimensional details for mounting and head clearance are given as A 15.7 mm, B 85 mm, E 25 mm, K 9 mm, supporting precise design of clamping assemblies and enabling faster CAD integration. Compatibility, handling and application notes Designed for workshop and industrial use, the bolt is suitable where a standard T‑slot anchoring solution is required—typical applications include machine tables, jigs and modular fixturing systems. The metric M16 thread allows compatibility with standard nuts and clamping hardware, preserving interchangeability across suppliers. Supplied as single units, the component from AMF supports small orders for maintenance spares as well as larger batch requirements when standardisation is a priority. Specify AMF T‑slot screws with DIN 787 geometry and strength class 8.8 via Metav Werkzeuge for consistent, workshop‑ready clamping—contact Metav Werkzeuge for ordering and technical guidance from Emmerich Technical Data Article number: 4000603223NW Product type: T‑slot screw (DIN 787) Manufacturer: AMF Facts T‑slot width: 16 mm Thread: M16 Overall length: 125 mm Packaging unit: 1 Special features Strength class: 8.8 Standard: DIN 787 Axite dimensions: A 15.7 mm; B 85 mm; E 25 mm; K 9 mm Brand: AMF FAQ What T‑slot size does this fastener fit? This fastener is designed for a 16 mm T‑slot and uses an M16 thread for anchoring. Is the product suitable for machine table clamping? Yes, the T‑slot screw (DIN 787) from AMF is intended for securing fixtures and workpieces on machine tables and modular fixturing. What does strength class 8.8 indicate for this screw? Strength class 8.8 denotes a high tensile rating suitable for many clamping tasks, offering a reliable balance of strength and toughness for securing components under load. Which standard governs the geometry of this fastener? The geometry follows DIN 787, the standard for T‑slot bolts and screws, ensuring interchangeability and conformity with tooling tables designed to that norm. How is the overall length measured for this item? The overall length is 125 mm, measured from end to end; this indicates available thread and shank length for assembly. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Bolt M16 L63mm Grade 8.8 With Nut And Washer, DIN 787 - AMF
Benefit from secure, standard-compliant clamping, robust Grade 8.8 strength and an M16 thread with a 63 mm overall length for reliable fixture assembly. Order directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot bolt DIN 787 – M16 thread, 63 mm, Grade 8.8 A AMF T-slot bolt DIN 787 engineered for secure clamping in 16 mm T-slots, supplied complete with nut and washer for immediate installation DIN 787 standard compliance M16 metric thread 63 mm overall length Includes nut and washer Consistent clamping performance for production workflows The solid-design T-slot fastener delivers repeatable clamping results in modular fixture systems. With an M16 thread and 63 mm overall length, the fastener is suitable for standard workshop fixtures and machine tables that use a 16 mm T-slot. The metric thread enables straightforward torque control with common tools, translating into predictable clamp force and fewer setup iterations. Emphasis on measurable performance supports efficient production planning and reduces downtime during changeover. Engineered to fit DIN 787 T-slot systems precisely Compliance with DIN 787 ensures dimensional compatibility with established T-slot profiles, enabling straightforward integration into existing jigs and tables. The 16 mm slot specification and the supplied hardware remove ambiguity during part selection, allowing procurement and assembly teams to match components rapidly. Clear standard adherence also simplifies maintenance documentation and parts lists for long-term workshop reliability. Durable strength class for demanding clamping tasks Manufactured to Grade 8.8, this bolt offers high tensile capacity for secure fixturing under repeated load. The elevated strength class reduces the risk of fastener deformation during heavy clamping and contributes to longer service intervals for fixtures. Supplied nut and washer guarantee correct seating and load distribution, helping to protect both the bolt and the mounted workpiece while supporting consistent clamping behaviour across repetitive cycles. Practical dimensional data for correct selection and fit Detailed dimensional values aid precise selection: A: 15.7 mm, B: 45 mm, E: 25 mm, K: 9 mm. These figures support quick verification of clearance and engagement depth when designing or modifying clamping arrangements. The clearly defined metrics reduce trial-and-error during assembly and enable confident specification in procurement lists and CAD documentation, ensuring the component fits as intended the first time. For secure, standard-compliant clamping with AMF components, contact Metav Werkzeuge in Emmerich for tailored advice and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833329NW Product type: T-slot bolt Standard: DIN 787 Manufacturer: AMF SKU / UID: 4000833329NW Facts T-slot: 16 mm Thread: M16 Overall length: 63 mm A: 15.7 mm B: 45 mm E: 25 mm K: 9 mm Package unit: 1 Special features Grade 8.8 Includes nut and washer Addition: A: 15.7; B: 45; E: 25; K: 9 FAQ What T-slot size does this bolt fit? The bolt is designed for a 16 mm T-slot, compatible with standard DIN 787 profiles; see SKU 4000833329NW for full identification. Is a nut and washer included with the bolt? Yes, the AMF T-slot bolt DIN 787 is supplied complete with a nut and washer for immediate installation and correct load distribution. Which standard and thread form apply to this fastener? The fastener conforms to DIN 787 and features an M16 metric thread with an overall length of 63 mm. Is the bolt suitable for heavy-duty clamping? With a Grade 8.8 classification, the bolt provides high tensile strength appropriate for demanding clamping tasks and repeated fixture cycles; refer to SKU 4000833329NW when ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Bolt, Flange, Coupling And 24 Clamping Screws Kit, Black Oxide Steel - Vertex
Take advantage of the combination of heat-treated steel, an anti-corrosion black oxide finish and broad compatibility with standard machine tables for reliable fixturing and long service life; order the set directly via Metav Werkzeuge or consult our advisors for specification matching. Bolt and T‑slot Kit VCK-1216 – M12 thread, T‑slot 16, Vertex A Bolt and T‑slot Kit designed for secure workholding on machine tables and fixtures in workshops and production environments. Heat-treated steel with black oxide finish Includes T‑nuts, flanges, couplings and clamping screws M12 thread for standard machine table fittings Compatible with T‑slot 16 tables Durable construction for consistent clamping performance Robust heat-treated steel and a protective black oxide finish give the kit resistance to wear and moderate corrosion during routine workshop use. The material treatment increases fatigue strength, while the finish reduces surface glare and seizing, resulting in more consistent torque transmission at the clamping points. This combination supports stable clamping forces over repeated cycles, which helps to maintain part position and repeatability on milling tables and drilling rigs. Complete set for flexible fixturing and reduced setup time The set comprises T‑nuts, flanges, couplings and clamping screws, delivered as a 38-piece kit that covers common fixturing tasks. The assortment reduces the need to scavenge for matching parts during setups and allows rapid reconfiguration of clamps and stops. With dedicated components for both transverse and axial loads, the kit simplifies fixture design and speeds up machine changeovers, improving throughput and lowering downtime between operations. Seamless integration with standard machine tables Designed around the M12 thread and T‑slot 16 sizing, the kit fits common table profiles and clamping rails used across many machine types. Thread standardisation means fast replacement of worn fasteners without special adaptors, while the T‑nut geometry ensures secure engagement within the slot to resist rotational forces during machining. These compatibility traits enable straightforward retrofitting to existing benches and tables without additional modification. Practical benefits for workshop efficiency and longevity By combining standardised dimensions with a comprehensive selection of fastening elements, this fixturing set supports repeatable setups, fewer tool changes and simplified inventory management. The durable finish and treated alloy reduce long-term maintenance, while the organised kit composition encourages disciplined storage and faster assembly. For shops aiming to standardise their clamping hardware, this solution balances robustness with operational convenience. Contact Metav Werkzeuge to discuss the Vertex bolt and T‑slot kit VCK-1216 for a tailored recommendation or to confirm compatibility with existing machine tables Technical Data Article number: VCK-1216 GTIN: 4061905092053 Weight: 4 kg Material: heat-treated steel with black oxide finish Thread: M12 T‑slot size: 16 Contents: 6 T‑nuts, 4 flanges, 4 couplings, 24 clamping screws Facts Pieces per set: 38 Manufacturer: Vertex SKU: VCK-1216 Gross weight: 4 kg Special features Heat-treated steel Black oxide finish Compatible with T‑slot 16 machine tables Comprehensive component assortment for fixturing FAQ What materials is the kit suitable for when used in fixturing? The Bolt and T‑slot Kit is a fixturing accessory and the components (made from heat-treated steel with a black oxide finish) are suitable for securing workpieces of diverse materials while mounted to a machine table; material-specific cutting parameters should be adjusted separately. Which table profiles does the set fit? The components are designed for tables with T‑slot 16 profiles and use an M12 thread standard to match common clamping rails and fixtures. How many and which parts are included in the set? The VCK-1216 set contains 38 items in total: 6 T‑nuts, 4 flanges, 4 couplings and 24 clamping screws for flexible fixture assemblies. Is the finish corrosion resistant and does it require special maintenance? The black oxide finish on the heat-treated steel provides moderate corrosion protection and reduces galling; simple lubrication and routine inspection are recommended to extend service life. Can worn screws or nuts be replaced individually? Yes, the use of standard M12 threads allows individual replacement of worn clamping screws and nuts without special parts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16mm T-Slot Nut M12 Height 18mm DIN 508, Strength Class 10 - AMF
Benefit from a standard-compliant design, high strength class 10 performance and a compact 18 mm profile for secure clamping in 16 mm T-slots; order the AMF T-slot nut directly via Metav Werkzeuge or consult our specialists for application advice. AMF T-slot nut (DIN 508) – T-nut 16 mm, M12 thread The AMF T-slot nut (DIN 508) is a precision clamping element for machinery and fixture work, developed for reliable engagement in 16 mm T-slots and fitted with an M12 internal thread. DIN 508 standardised design For 16 mm T-slots M12 internal thread Height 18 mm, strength class 10 Consistent, standardised fastening for repeatable setups A solution built to industry standards, this T-slot nut ensures DIN 508 compliance, guaranteeing interchangeability with matching table profiles and fixtures. The combination of a 16 mm slot fit and an M12 internal thread reduces ambiguity during procurement and simplifies inventory management. With its declared strength class 10, the component delivers a predictable load capacity that supports engineered clamping strategies; the specification therefore aids planners and workshop managers in selecting the correct element for machines and jigs without the need for extensive testing. Faster assembly and secure engagement at the machine The compact height 18 mm profile is designed for positive engagement in the slot, improving contact surface and reducing the risk of rotation under load. As a T-slot element, it converts axial screw force into secure lateral fixation, enabling efficient clamping with minimal setup time. This practical behaviour translates into measurable productivity gains on repeat runs and fixture changes, while the standardised geometry helps maintain consistent torque transfer and stable clamping forces across assemblies. Practical procurement and engineering information for integration Engineering values such as the axite enrichment (A: 15.7; E: 25; K: 9) and the declared strength class 10 provide the necessary data points for CAD integration and strength assessments, supporting design decisions early in the work process. Delivered in single-piece packaging, the component is appropriate for sample fitting or small batch supplies. For specification clarifications or to obtain additional technical drawings, Metav Werkzeuge provides direct support via email and telephone; this local point of contact aids rapid decision-making and reliable supply planning. Request tailored technical advice or a stock check from Metav Werkzeuge for the AMF T-slot nut (SKU 4000603165NW) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603165NW Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 16mm M12 AMF Manufacturer: AMF Product type: T-slot nut Packaging unit: 1 Numbers / Core data Height: 18 mm T-slot size: 16 mm Thread: M12 Strength class: 10 Axite values: A 15.7; E 25; K 9 Designs / Special features DIN 508 compliant Works standard T-nut 16 mm M12 internal thread Single-piece packaging FAQ Is this T-slot nut compatible with all 16 mm T-slots? The AMF T-slot nut is designed to fit standard 16 mm T-slots in accordance with DIN 508 and will be compatible with tables and profiles manufactured to that standard. What does strength class 10 mean for my clamping setup? Strength class 10 indicates the material grade and tensile characteristics declared for the component; the AMF T-slot nut’s class 10 rating supports robust clamping where predictable mechanical performance is required. Can the T-slot nut be used with M12 clamping screws directly? Yes, the internal M12 thread on this slot nut accepts M12 clamping screws, enabling direct use with standard threaded fasteners for secure fixation. Are the axite enrichment values relevant for fixture design? Yes, the axite values (A: 15.7; E: 25; K: 9) provide additional geometric and load-related information useful for CAD modelling and engineering assessments when integrating the T-nut into fixtures. Is the product supplied as single units or in bulk packs? The component is supplied as a single-piece packaging unit, suitable for sample fitting or precise quantities in assembly operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut M14 DIN 508 18mm Height, Strength Class 10 - AMF
A compact combination of DIN 508 standard conformity, a 16 mm T-slot fit and a secure M14 thread ensures reliable fixture clamping and long service life. Benefit from the robust strength class 10 specification and fast supply from Metav Werkzeuge — order directly or consult our team for application advice. T-slot nut (DIN 508) — T-Nut 16 mm with M14 thread (AMF) The T-slot nut (DIN 508) is a standardised clamping element for 16 mm T-slots, providing a secure threaded anchor (M14) for fixtures, stops and tooling in milling and drilling tables. DIN 508 standard compliance For 16 mm T-slots M14 internal thread Strength class 10 Secure, standardised clamping for production tables The choice of a DIN 508-compliant T-slot component delivers predictable fit and repeatable positioning across a wide range of machine tables. By matching the common 16 mm T-slot dimension and offering an M14 internal thread, the part reduces setup times and minimises the need for custom adaptors. The standardisation translates into operational reliability: fixturing becomes straightforward, interchangeability is ensured and the risk of misfit is lowered. This practical compatibility supports efficient small-batch production and routine workshop tasks. Engineered for strength and stable fixation Manufactured to a strength class 10, this T-slot element provides high clamping resilience under load, making it suitable for demanding holding tasks. Dimensional data specified for seating and engagement (A: 15.7; E: 25; K: 9) ensures precise seating and consistent torque transmission when paired with appropriate bolts. The internal M14 thread permits use with common industrial fasteners, enabling secure joining without additional machining. The result is a robust connection that maintains alignment and resists loosening during machining cycles. Practical integration and workshop advantages The compact geometry and standard thread allow quick installation and replacement, which reduces machine downtime and simplifies inventory management. As a simple, durable component, the nut supports modular fixturing strategies and is well suited to both maintenance and production environments. For purchasers seeking dependable components, the standardised specification and measurable dimensions facilitate procurement and quality control within an industrial supply chain. For professional procurement of standardised clamping components, contact Metav Werkzeuge for fast delivery from Emmerich, technical advice and exact order handling via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833205NW Article designation: T-slot nut (DIN 508) T-Nut 16mm M14 AMF Thread: M14 T-slot width: 16 mm Standard: DIN 508 Facts Height: 18 mm Addition A: 15.7 Addition E: 25 Addition K: 9 Strength class: 10 Packaging unit: 1 UID: 4000833205NW Special features Standardised for repeatable clamping Compatible with common M14 fasteners Robust strength specification Compact design for machine tables FAQ How does the DIN 508 standard affect compatibility with machine tables? The DIN 508 specification used for this T-slot nut ensures that the component seats and aligns consistently in 16 mm T-slots, providing predictable compatibility with standard machine tables and fixtures. Can the M14 thread be used with standard hex bolts and clamping elements? Yes, the M14 internal thread is compatible with commonly available M14 bolts and clamping hardware, allowing straightforward integration into existing fixturing systems. What do the A, E and K dimensions indicate for installation? The listed values (A: 15.7; E: 25; K: 9) describe key seating and engagement dimensions that determine how the nut locates in the slot and how much thread engagement is available for safe clamping. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm T-Slot Nut Nr. 510 T-Slot 14mm M12 Rhombic, Strength Class 10 - AMF
Secure clamping and straightforward integration into standard fixtures thanks to the rhombic profile and an M12 fixation thread. The compact 16 mm height suits 14 mm T-slots while strength class 10 ensures reliable load capacity. Order the AMF T-slot nut directly via Metav Werkzeuge or ask our consultants for tailored advice. T-slot nut Nr. 510 — AMF T-Nut 14 mm, M12, rhombic T-slot nut Nr. 510 is a rhombic-profile T-slot nut designed for secure, repeatable fixturing in machine tables and modular fixtures. Rhombic profile for secure clamping Compatible with 14 mm T-slots M12 thread for robust fixation Strength class 10 for high load capacity Reliable clamping performance for precision fixtures The rhombic profile provides a positive seating in the slot, reducing lateral play and improving repeatability in clamping positions. Combined with the M12 internal thread and a nominal height of 16 mm, the component is dimensioned for stable engagement in 14 mm T-slots, delivering consistent clamp force under cyclic loads. The strength class 10 designation indicates enhanced tensile properties, which benefits applications where sustained clamping pressure and safety margins matter. Clear dimensional fit for quick selection and assembly Key dimensional values are specified as A: 13.7 mm, E: 22 mm and K: 8 mm, ensuring a predictable fit into profile and table grooves. These figures describe the main contact and engagement geometry and support compatibility checks with bolting hardware and slot tolerances. The rhombic head geometry and the T-slot interface allow simple assembly with standard hex bolts into the M12 thread, shortening setup time and reducing adjustment work on the shop floor. Suitable uses and workshop advantages The part is intended for use in milling tables, drilling jigs, and modular clamping systems where both positional accuracy and load resistance are required. Its compact form factor helps keep assemblies close to the workpiece while the M12 fixation ensures connection integrity during machining operations. Specified packaging unit facilitates inventory planning for workshops and distributors, and the combination of proven geometry and elevated material strength supports long service intervals and predictable maintenance cycles. For ordering or selection support for the AMF T-slot nut Nr. 510, contact Metav Werkzeuge for expert advice and prompt dispatch from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833217NW SKU: 4000833217NW Brand: AMF Type: Nr. 510 Product: T-slot nut Facts Height: 16 mm T-slot size: 14 mm Thread: M12 Dimensional values: A: 13.7 mm, E: 22 mm, K: 8 mm Strength class: 10 Packaging unit: 1 Special features Rhombic head profile Designed for machine table and fixture use Robust M12 fixation Compact, low-profile form FAQ Which T-slot width is this nut compatible with? The AMF T-slot nut Nr. 510 is designed for 14 mm T-slots and engages reliably with the specified head geometry. What thread does the component accept? The internal thread is M12, allowing use with standard M12 bolts for secure fastening. What does strength class 10 mean for load handling? Strength class 10 indicates higher tensile properties compared with lower classes, so the AMF T-slot nut Nr. 510 offers improved resistance to shear and tensile loads in demanding clamping situations. Are the dimensional values A, E and K relevant for fixture design? Yes; A: 13.7 mm, E: 22 mm and K: 8 mm define the main engagement geometry and help ensure correct clearance and contact in assemblies. Is this product suitable for repeated repositioning in jigs? The rhombic profile and robust thread make the part well suited to repetitive clamping and repositioning in modular workshop fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Tool Holder E1 For Indexable Drill With Internal Coolant, DIN 69880 - TECWERK
Take advantage of the combination of standardised interfaces and secure clamping to maintain consistent tool performance; the VDI30 shank and 16 mm clamping diameter deliver repeatable results in drilling operations. Order the holder directly via Metav Werkzeuge or contact their consultants for specification advice. Tool holder E1 DIN 69880 — VDI30 clamping, 16 mm bore (TECWERK) Tool holder E1 DIN 69880 for secure VDI30 mounting of indexable insert drills, designed for operations with internal coolant supply DIN 69880 compatible E1 form VDI30 shank for stable clamping Clamping diameter 16 mm for insert drills Internal coolant supply for machining Consistent clamping for repeatable machining accuracy The Form E1 holder delivers a standardised interface that simplifies tool set-up and repeatability on CNC lathes and milling-turning centres. Thanks to the VDI30 connection and a 16 mm clamping bore, the holder ensures stable clamping of insert drills, reducing runout and rework. This compatibility with recognised interfaces means tool changes are faster and toolholders remain interchangeable across machines that accept VDI tooling, supporting predictable production flow and reduced setup time. Optimised coolant routing for improved tool life and chip control Integrated provision for internal coolant supports effective cooling at the cutting edge, which helps control temperatures and extend insert life during deep or continuous drilling cycles. The internal coolant capability works with indexable tools designed for through-coolant delivery, improving chip evacuation and surface finish. For operations where coolant-assisted drilling is required, this holder contributes to lower tool wear and fewer interruptions, helping maintain throughput and process reliability. Standard conformity for flexible tooling and easy integration Constructed to the DIN 69880 guideline and specified as Form E1, the holder fits established machining standards and a wide range of indexable insert drills with a cylindrical shank. The VDI30 interface and cylindrical shank arrangement offer a robust mechanical connection, while the measured dimensions (clamping and shank data) permit precise selection of cutters and adaptors. The standardised approach reduces tooling inventory complexity and enables shops to standardise toolholding across multiple machines. Practical benefits for workshops and production environments This tool holder is aimed at professional workshops and contract manufacturers that prioritise uptime and consistency. By combining a standardised mechanical interface with internal coolant capability and an exacting clamping diameter, the holder supports efficient changeover routines and dependable machining results. For procurement and workshop managers, the result is fewer production surprises, lower scrap rates and a clearer path to predictable cycle times—backed by a supplier network that values reliable supply and technical clarity. Speak with Metav Werkzeuge to confirm the correct VDI30 E1 holder for specific machine interfaces and to secure reliable delivery from Emmerich. Technical data Article number: 2000833661NW Product type: Tool holder for indexable insert drills Brand: TECWERK Form: E1 Standard: DIN 69880 Packaging unit: 1 Facts Clamping diameter d2: 16 mm Shank diameter d1: 30 mm d3: 36 mm d6: 68 mm h1: 28 mm h2: 30 mm l1: 67 mm l3: 22 mm Special features VDI30 interface Cylindrical shank Internal coolant supply Suitable for indexable insert drills Conforms to Form E1 FAQ Is the holder compatible with standard VDI30 tool posts? Yes. The TECWERK tool holder E1 DIN 69880 is designed for the VDI30 interface and fits machines that accept VDI30 tool posts. Does this holder support through-coolant drilling? Yes. The holder provides for internal coolant supply and is intended for tools that deliver coolant to the cutting edge. Which standards and form factors does the holder follow? The holder conforms to DIN 69880 and is specified as Form E1, ensuring standardised mounting and interchangeability. What are the key dimensions to check for machine compatibility? Key dimensions include the 16 mm clamping diameter (d2) and the 30 mm shank diameter (d1); additional dimensions such as d3, d6, h1, h2, l1 and l3 are listed in the technical facts for exact matching. How is the product supplied and what is the packaging unit? The item is supplied as a single unit; packaging unit is 1. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16x20x14mm Block for Guide Rail M6 T-Slot, Set of 4, S45C Steel - Vertex
Take advantage of the compact dimensions, robust S45C steel construction and M6 compatibility to secure guide rails reliably in confined assemblies; the set format simplifies stocking and replacement. Order directly via Metav Werkzeuge or consult the sales team for specification checks. 16TO14 block for guide rail – compact S45C with M6 T‑nut compatibility The 16TO14 block for guide rails is a compact mounting block designed to position and secure linear guides in light‑assembly and workshop fixtures, offering a space‑saving solution for confined machine beds. Compact 16×20×14 mm footprint S45C steel for robust wear resistance Compatible with M6 T‑nut mounting Supplied as a set of 4 blocks Space‑efficient precision for tight assemblies The small footprint of the block ensures reliable locating in restricted spaces without compromising on mechanical stability. Constructed from S45C, the component provides a predictable balance between toughness and machinability; the material choice supports consistent performance under repetitive load cycles. The compact geometry translates into straightforward integration in fixtures where larger components would interfere with moving elements, while maintaining the necessary contact area for steady support. This combination of size and material reduces the likelihood of misalignment during assembly, supporting smoother production runs and fewer adjustment cycles. Designed for compatibility and straightforward installation Compatibility with an M6 T‑nut makes the unit suitable for common sloted rails and standard table systems; the threaded interface facilitates secure fastening and quick replacement. Supplied as a set of 4, the package addresses small batch requirements and minimises replenishment effort for maintenance inventories. The design places emphasis on predictable mounting: the block sits flush against the guide profile and is clamped via the T‑nut, which is a widely used solution in modular fixturing. For technicians less familiar with industrial fittings, the T‑nut system offers an intuitive method to achieve secure clamping without specialised tooling. Durable operation and simplified stock management The block’s modest mass (approx. 0.1 kg) and steel construction deliver a practical compromise between inertia and resistance to wear, reducing the need for frequent replacement in standard workshop conditions. As a Vertex‑manufactured component, the item benefits from controlled production tolerances that support interchangeability across assemblies. For procurement and workshop managers, the set format combined with standard fastening compatibility reduces variants that must be held in stock and streamlines maintenance workflows. Clear labelling with SKU and GTIN aids traceability and ensures the component can be matched to existing parts lists during servicing. For specification confirmation or to arrange a supply of Vertex blocks through Metav Werkzeuge, contact the team in Emmerich — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930, WhatsApp: +49 170 2837271 Technical data Article number: 16TO14 GTIN: 4061905092756 Manufacturer: Vertex Facts Material: S45C Dimensions: 16×20×14 mm Weight: 0.1 kg T‑nut size: M6 Set contents: 4 pieces eClass: 23300402 Special features Suitable for guide rail mounting Compact block geometry Standardised threaded interface Vertex quality manufacturing FAQ What materials is this block made from? The block is manufactured from S45C steel, offering balanced toughness and machinability for workshop and light industrial use. Is the block compatible with standard T‑slot rails? Yes, the unit is designed for M6 T‑nut fastening and is compatible with common T‑slot rail systems. How is the product supplied and what is the SKU? The item is supplied as a set of 4 blocks and is listed under SKU 16TO14 by Vertex. Can the block be used in confined machine beds? Its 16×20×14 mm footprint and compact profile make the block suitable for tight assemblies where space is limited. Where can Vertex blocks be sourced for European workshops? Vertex blocks such as the 16TO14 are available via Metav Werkzeuge, which provides centralised distribution and stock management for European customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16x20x14mm Block for Guide Rail, T-Slot M5, S45C Steel, Set of 4 - Vertex
Take advantage of a robust combination of S45C construction, compact 16 x 20 x 14 mm dimensions and an M5 T‑slot for straightforward installation; the set of four blocks keeps assembly time low and inventory simple. Order the guide rail blocks directly via Metav Werkzeuge or ask the consultants for clarification. Block for Guide Rail 14TO16 — S45C construction, M5 T‑slot A Block for Guide Rail 14TO16 engineered for precise alignment and secure clamping in linear guide and rail systems, suitable for workshop and production environments Compact 16 x 20 x 14 mm footprint Made from durable S45C steel M5 T‑slot for standard mounting Delivered as a set of 4 pieces Durable steel construction for consistent alignment The small clamping element is manufactured from S45C, a medium‑carbon steel chosen for its balanced combination of hardness and machinability. This material choice gives the component reliable wear resistance and dimensional stability under repeated clamping cycles, contributing to consistent precision in linear guide assemblies. The compact 16 x 20 x 14 mm form factor reduces interference in dense setups while maintaining a stable contact surface for guided motion. Fast mounting and reduced assembly time Equipped with an M5 T‑slot thread, the element is compatible with common guide‑rail hardware and standard fasteners, enabling quick integration into existing fixtures. Delivered in a set of 4, the pack supports simultaneous replacement or multi‑point mounting, cutting downtime and simplifying parts management. The modest mass (approx. 0.12 kg) per set minimises shipping and handling effort and makes storage straightforward for production lines and maintenance trolleys. Engineered for workshop reliability and traceability Produced by Vertex, the component adheres to standardised production practices, supporting reproducible fitting and interchangeability across batches. The compact part supports accurate positioning and stable clamping forces in a small footprint, which helps to reduce setup variability and scrap rates in machining or assembly processes. Identification via SKU 14TO16 and GTIN 4061905093852 ensures traceability in procurement and inventory systems. Secure reliable alignment with Vertex guide rail blocks (SKU 14TO16) — contact Metav Werkzeuge in Emmerich for tailored supply and technical advice Technical data SKU: 14TO16 GTIN: 4061905093852 Material: S45C Dimensions: 16x20x14mm Weight: 0.12 kg Pieces per set: 4 T‑slot/thread: M5 ECLASS: 23300402 Facts Dimensions: 16 x 20 x 14 mm Weight: 0.12 kg Pieces per set: 4 T‑slot: M5 SKU: 14TO16 GTIN: 4061905093852 Special features Material: S45C steel Designed for guide rail/clamping applications Manufacturer: Vertex FAQ What material is the block made from? The block is produced from S45C steel, offering a balance of hardness and machinability suitable for guided clamping applications. How is the block mounted to a guide rail? Mounting is achieved via an M5 T‑slot thread, compatible with standard fasteners used in guide‑rail assemblies. How many pieces are included in the supply unit? The item is supplied as a set of 4 pieces, which simplifies multi‑point installation and replacements. Can the part be identified for inventory control? Yes, the component is traceable by SKU 14TO16 and GTIN 4061905093852 for procurement and stock management. Who manufactures this guide rail block? The block is manufactured by Vertex, produced to standardised specifications for consistent performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
16x22x10mm Block for Guide Rail, T-Slot M6, S45C Steel, Set of 4 - Vertex
Benefit from precise alignment, robust S45C construction and compact dimensions to keep fixture setups consistent and easy to maintain. Order the Block for guide rail (16TO16) directly via (Metav Werkzeuge) or ask our consultants if needed. Block for guide rail — compact, S45C steel guide block by Vertex, M6 T‑slot A Block for guide rail designed to secure and space linear guide rails in modular fixtures and jigs for workshop and production use. Precision-machined S45C steel Compact 16×22×10 mm format Set of 4 for consistent spacing T-slot M6 for secure mounting Reliable alignment and straightforward mounting Precisely machined contact faces and a standard M6 T‑slot provide repeatable positioning and secure clamping for linear guide systems. The arrangement as a set of 4 delivers uniform spacing across multiple attachment points, reducing setup iterations and minimising misalignment. The design focuses on functional reliability so that fixture assembly and routine replacement remain efficient and predictable, supporting lean production workflows. Durable steel construction that suits workshop demands The component is produced from S45C, a medium‑carbon steel selected for its favourable balance of strength and machinability. This material choice supports resistance to routine mechanical stress while allowing uncomplicated post‑machining when custom adjustments are required. As a Vertex part, the item benefits from consistent manufacturing tolerances and industrial quality control so that each piece behaves predictably within guiding and fixturing applications. Compact dimensions for flexible fixture design With overall dimensions of 16×22×10 mm and a mass of 0.09 kg, the unit integrates into tight assemblies without adding unnecessary bulk. The small footprint allows high‑density placement on guide rails and makes the component suitable for modular fixtures, prototypes and space‑constrained machinery. The lightweight nature contributes to reduced dynamic loads where multiple guide blocks are employed, helping to maintain accuracy across serialised setups. Choose Vertex guide blocks for dependable alignment and contact Metav Werkzeuge in Emmerich for tailored advice and efficient supply Technical data Article number: 16TO16 GTIN: 4061905090028 Manufacturer: Vertex Facts Dimensions: 16×22×10 mm Weight: 0.09 kg Pieces per set: 4 T‑slot: M6 Special features Material: S45C Set: yes Eclass: 23300402 FAQ Can this block be used with standard linear guide rails? The Block for guide rail (Vertex, SKU 16TO16) is intended for use as a guide or spacer on linear rail systems and fits mounting arrangements that accept an M6 T‑slot. What material is the component made from? The guide block is manufactured from S45C steel, chosen to balance strength and machinability for workshop applications. Is the product supplied individually or as a set? This item is supplied as a set of 4, allowing consistent spacing and matching tolerances across multiple mounting points. What are the exact dimensions and weight of the block? Dimensions are 16×22×10 mm and the mass is 0.09 kg, suitable for compact and lightweight fixture designs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
17-42mm Closure Clamp Horizontal Foot With Spring, 220N Thrust, Stainless Steel - Kukamet
Combining stainless steel construction with a spring-loaded mechanism and a secure holding force, this clamp ensures reliable, low-maintenance fastening for industrial fixtures. Its adjustable arm and horizontal-foot mounting give versatile fit and simple integration. Order the 311 latch clamp directly via Metav Werkzeuge or ask our consultants if needed. 311 Latch Clamp — Stainless steel, spring-loaded horizontal-foot latch by Kukamet The 311 latch clamp is a spring-loaded stainless steel closure clamp with a horizontal foot, designed for secure fastening of panels, covers and fixtures in industrial and workshop applications. Spring-loaded over-centre action Stainless steel construction Adjustable arm 17–42 mm Holding force up to 325 N Secure, consistent fastening for repeatable processes The spring-loaded over-centre design provides consistent clamping and minimise the risk of loosening under vibration. With a rated holding force of up to 325 N and a maximum clamping force of 220 N, the closure offers dependable retention in repetitive assembly or transport situations. The mechanical action guarantees repeatable results without manual re-tensioning, supporting higher process reliability and reduced downtime. Flexible mounting and quick adjustment for different assemblies An adjustable arm that covers 17–42 mm enables rapid adaptation to varying panel thicknesses or flange gaps, reducing the need for multiple part variants. The horizontal foot mounting allows a compact installation profile where space is limited, while the integrated hook provides a secure engagement point. The specified thread length of 75 mm supports conventional fastenings and fine adjustment during setup, making the clamp suitable for jigs, enclosures and access doors. Corrosion resistance and minimal upkeep in demanding environments Constructed from stainless steel, the latch is suited to environments where corrosion resistance is required, resulting in low maintenance and prolonged service life. The spring element ensures constant preload while absorbing minor misalignments, and the robust hook design withstands repeated cycles. Together, these attributes reduce replacement frequency and support a stable long-term fixture solution. Contact Metav Werkzeuge for expert advice on the Kukamet 311 latch clamp and to request detailed technical information or configuration support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S311-3-Y GTIN: 8680731505702 Manufacturer: Kukamet Weight: 0.341 kg Core technical data Maximum clamping force: 220 N Maximum holding force: 325 N Arm range: 17–42 mm Thread length: 75 mm Weight: 0.341 kg Materials & features Material: stainless steel Attachment: horizontal foot With hook With spring Category: clamps FAQ What is the primary function of this latch clamp? The Kukamet 311 latch clamp is designed to provide secure, repeatable closure for panels and fixtures, offering a spring-loaded over-centre action and a reliable holding force for industrial applications. Can the clamp accommodate different panel thicknesses? Yes. The adjustable arm range of 17–42 mm allows the 311 latch clamp to be adapted to various gaps and panel thicknesses during installation. Is this clamp suitable for corrosive environments? The 311 latch clamp is made from stainless steel, which offers enhanced corrosion resistance and reduced maintenance in humid or corrosive settings. How is the clamp mounted? The unit is designed for horizontal-foot mounting and includes a hook engagement; a thread length of 75 mm permits standard fastening and fine positional adjustment. What load values should be considered for safety? Reference the maximum clamping force of 220 N and the holding force of 325 N when designing fixtures; these values indicate the clamp’s reliable retention and clamping capability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17-42mm Toggle Clamp Horizontal Foot With Spring And Safety Catch, Stainless Steel - Kukamet
Rely on the combination of stainless-steel durability, a spring-loaded safety lock and an adjustable arm for secure, repeatable clamping in production and assembly environments; order the unit directly via Metav Werkzeuge or ask our consultants for application support. 311 toggle latch clamp S311-3-Y-L – stainless steel, spring-loaded safety lock The 311 toggle latch clamp is a horizontal-mounted clamp designed to secure fixtures, closures and jigs with fast actuation and reliable retention. Stainless steel construction Spring-loaded with safety lock Horizontal foot for secure mounting Adjustable arm 17–42 mm Holding force up to 325 N Reliable retention that reduces rework and downtime The clamp delivers both a clear clamping force and a higher holding force, ensuring that fixtures remain stable during processing and handling. The difference between the two is straightforward: clamping force is the pressure applied when the latch is engaged, while holding force describes resistance to separation under load. With a measured holding capability of 325 N, this device provides secure positioning for light to medium-duty tasks, reducing the likelihood of part movement and subsequent rework. The clear numeric values support planning for fixture design and process reliability. Corrosion-resistant build for long service life Manufactured from stainless steel, the device is optimised for environments where rust resistance and hygiene are important. The robust material choice minimises maintenance intervals and extends service life compared with plated or painted alternatives. For operators who need predictable performance over many cycles, the corrosion-resistant construction means fewer unexpected replacements and a lower total cost of ownership for the clamping station. This is particularly relevant where regular cleaning or exposure to humidity occurs. Fast, safe operation with integrated spring and lock Operation is rapid thanks to the spring-loaded mechanism, which returns the latch to position and speeds repetitive cycles. The integrated safety lock prevents accidental release during vibration or handling, improving process safety and protecting components in transit or machining. The clamp’s simple lever action supports efficient handling on assembly lines and jigs, delivering both speed and a defined locked state so that operators can rely on consistent engagement without additional fixtures. Flexible mounting and straightforward adjustment A horizontal foot simplifies installation on flat fixture plates; the arm is adjustable from 17–42 mm, enabling adaptation to different flange heights and closure gaps without replacing hardware. Thread length of 75 mm allows secure fixation and a range of fastener choices. The presence of a hook option permits use as a latch for doors or panels as well as direct clamp applications. Such adaptability makes the component suitable for diverse applications in assembly, packaging and light fabrication. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Kukamet 311 toggle latch clamp into production processes and to discuss available quantities and delivery options Technical data Article number: S311-3-Y-L GTIN: 4061905080159 Manufacturer: Kukamet Core specifications Weight: 0.341 kg Arm range: 17–42 mm Max clamping/pressure force: 220 N Max holding force: 325 N Thread length: 75 mm Materials & features Material: stainless steel Mounting: horizontal foot Spring-loaded operation Safety lock included With hook Category: spanner FAQ What is the difference between clamping force and holding force? Clamping force refers to the pressure applied during engagement, while holding force indicates resistance to separation; the Kukamet 311 toggle latch clamp specifies a clamping pressure of 220 N and a holding capability of 325 N. Can the clamp be mounted on standard fixture plates? Yes, the horizontal foot design allows direct mounting to flat plates; the 75 mm thread length supports various fasteners and secure attachment. Is the clamp suitable for use in humid or washdown environments? The stainless-steel construction of the 311 toggle latch clamp improves corrosion resistance, making it appropriate for conditions where moisture or regular cleaning is expected. How is the arm adjustment achieved and what range is available? Adjustment is made by repositioning the arm within the 17–42 mm range to match component thickness or gap; this allows flexible use across several fixture designs. Can this clamp function as a latch for doors or panels? Yes, the integrated hook and spring-loaded action permit use as a latch for closures as well as for direct clamping duties in jigs and fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17.5mm Pot Magnet With M6 Threaded Countersunk Hole Holding Force 26 N, Max Temp 450 °C - TECWERK
Take advantage of the combination of compact dimensions, AlNiCo 500 high-temperature resistance and a secure M6 fixing for reliable, repeatable retention in assembly and jig applications; order via Metav Werkzeuge or consult our technical advisers for precise selection and delivery. TECWERK Pot magnet, 17.5 mm Ø × 16 mm H with M6 threaded blind hole The pot magnet is a compact retention solution designed for securing lightweight components where space is limited and elevated operating temperatures are expected. Compact pot magnet, Ø 17.5 mm, H 16 mm AlNiCo 500 material for high-temperature use Integrated M6 threaded blind hole Holding force up to 26 N Consistent retention at elevated temperatures for smoother production This compact retention element, made from AlNiCo 500, offers stable magnetic properties at elevated temperatures, with a specified maximum operating temperature of 450 °C. The rated holding force of 26 N provides predictable retention for lightweight fixtures and positioning tasks, reducing the need for repeated adjustments. Where thermal processes are part of the workflow, the magnet’s material choice ensures that magnetic performance remains dependable, which contributes to fewer stoppages and a more consistent production flow. Space-saving design that simplifies assembly and mounting With an outer diameter of 17.5 mm and a height of 16 mm, the magnetic base is tailored for installations in confined assemblies. The threaded blind hole (M6) allows secure fastening without protruding fixings, enabling flush or recessed mounting in jigs and brackets. The small footprint and neat fixing option speed up integration into existing tooling, minimise obstruction in tight assemblies and reduce the need for custom fixtures, thereby saving time during machine setup and part changeover. Durable behaviour and predictable handling across processes The pot construction delivers repeatable contact behaviour, helping to locate and hold parts consistently during handling or light clamping. The product’s specifications also note a lacquer-bake tolerance of 200 °C, which supports processes that include painting or coating cycles before final assembly. Combined with robust material selection and a standard M6 thread, this component suits repeatable industrial use where predictable, low-force retention is required and where corrosion resistance and thermal endurance are beneficial. For tailored advice on selecting the right pot magnet for a specific application or to arrange supply from stock, contact Metav Werkzeuge — Metav is ready to assist with technical guidance and reliable delivery from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 4000832275NW Manufacturer: TECWERK Product type: Pot magnet SKU: 4000832275NW Facts Diameter: 17.5 mm Height: 16 mm Thread: M6 Holding force: 26 N Maximum operating temperature: 450 °C Lacquer/bake temperature: 200 °C Material: AlNiCo 500 Packaging unit: 10 Special features With threaded blind hole Compact pot construction Suitable for high-temperature environments FAQ What is the maximum holding force of this pot magnet? The pot magnet from TECWERK provides a maximum holding force of 26 N, appropriate for securing lightweight components and fixtures. Can the magnet be used in high-temperature processes? Yes. The AlNiCo 500 material has a maximum operating temperature of 450 °C, and the component withstands lacquer baking up to 200 °C, making it suitable for many thermal process steps. How is the magnet fixed in place? Fixing is via the integrated M6 threaded blind hole, allowing recessed or flush mounting without exposed fixings. Which product should be ordered for consistent supply? Order the TECWERK pot magnet, SKU 4000832275NW, via Metav Werkzeuge for assured availability and supply from stock. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1700 N Hold Force Horizontal Foot Push Rod Clamp 1.5 kN Thrust, Blackened Finish - Kukamet
Take advantage of a compact clamp that combines a 1,500 N clamping force, a 1,700 N holding force and a lightweight design for reliable fixture work in tight setups; its horizontal-foot mounting and M6 x 40 pressure spindle simplify integration into existing jigs. Order the push-rod clamp directly via Metav Werkzeuge or ask our consultants if additional specification details are required. Push-rod clamp 511 — horizontal-foot mounting, 1.5 kN clamping force (Kukamet) The Push-rod clamp 511 is a compact industrial clamp designed for short-stroke fixture applications, offering robust clamping and secure holding in machining and assembly environments. Compact 1.5 kN clamping force for secure fixing Horizontal-foot mounting for space-saving installation Lightweight construction at 0.28 kg for easy handling Blackened finish for corrosion resistance and reduced reflections Assured clamping power for repeatable production results The clamp delivers a maximum clamping force of 1,500 N and a holding force of 1,700 N, values that support consistent fixturing under dynamic loads. These rated forces translate into reliable part retention during operations such as light milling, drilling or assembly, reducing the risk of movement that can cause rejects. The registered spindle thread M6 x 40 permits fine contact pressure adjustment; the threaded pressure spindle enables controlled compression and compensation for minor part tolerances. Such quantifiable performance figures make the component a predictable element within quality-controlled workflows. Space-efficient mounting with straightforward integration Thanks to the horizontal foot mounting, the clamp fits onto base plates and fixtures where vertical clearance is limited, offering a low-profile option for compact jigs. The body’s blackened finish provides basic corrosion protection and minimises glare under workshop lighting, supporting visual inspection tasks. At 0.28 kg, the device imposes minimal additional mass on moving fixtures and is easy to position during assembly. The mechanical design emphasises simplicity: fixed mounting holes and a direct actuation path reduce installation time and lower the need for subsequent adjustments. Practical benefits for everyday workshop use Material selection and finish ensure a low-maintenance component that integrates into mixed-tooling environments. The clamp’s compact footprint and measurable force ratings allow planners to standardise on a single clamping solution for small- to medium-sized parts, simplifying inventory and fixture design. Where quick part changes are required, the rigid holding characteristic helps maintain process repeatability; this reduces setup iterations and supports smoother production sequences. The device suits users who prioritise dependable mechanical performance over complex actuation systems. Secure production reliability with Kukamet’s 511 clamp — contact Metav Werkzeuge for technical advice and supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B511-2 Model: 511 GTIN: 8680731503869 ECLASS: 21041716 ETIM: EC011973 Facts Clamping force, max: 1,500 N Holding force, max: 1,700 N Weight: 0.28 kg Pressure spindle: M6 x 40 Special features Mounting type: horizontal foot Finish: blackened Special feature: none FAQ What applications is this clamp suitable for? The Push-rod clamp 511 from Kukamet is suitable for short-stroke clamping in machining, assembly and inspection jigs where a compact, mechanically robust clamp is required. How is the clamp mounted to a fixture? Mounting is achieved via the horizontal foot; the clamp’s base allows direct attachment to plates or fixture blocks compatible with horizontal-foot clamps. Can the contact pressure be adjusted? Yes. The M6 x 40 pressure spindle permits adjustment of the contact point and pressure for compensation of small part height variations when using the Push-rod clamp 511. What finish does the clamp have and why does it matter? The clamp features a blackened finish which offers basic corrosion resistance and reduces reflective glare, aiding visual tasks and longevity under normal workshop conditions. Is the clamp suitable for portable fixtures and frequent repositioning? At 0.28 kg the clamp is lightweight and therefore well suited to portable or frequently reconfigured fixtures where easy handling is an advantage. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700 N Hold Force Pushrod Clamp Vertical Foot, Zinc Plated, 1500 N Thrust - Kukamet
Combine the compact design, zinc-plated corrosion resistance and impressive 1,500 N clamping capacity to keep fixtures secure and production steady. Order the push‑rod clamp directly via Metav Werkzeuge or contact our consultants for application advice. Push-rod clamp 512 — vertical-foot clamping unit with zinc plating and 1,500 N force (Kukamet) A Push-rod clamp 512 for secure workholding in jigs and fixtures, designed with a vertical foot for sturdy mounting and a compact profile suited to dense assembly environments Zinc-plated steel finish Max. clamping force 1,500 N Holding force up to 1,700 N Compact weight 0.28 kg, vertical foot Consistent, measurable clamping for repeatable production The unit delivers a clear performance advantage where reliable force and repeatability matter. With a maximum clamping force of 1,500 N and a holding force of 1,700 N, the clamp converts input actuation into stable workpiece retention; clamping force refers to the active pressure applied during engagement, while holding force denotes resistance to displacement once engaged. This distinction ensures correct selection for fixtures that require both initial bite and sustained retention. The robust force figures support shorter cycle times and reduce rework, making the component particularly suited to batch production and light assembly lines where precision under repeated operation is essential. Durable finish and compact mounting for tight spaces A zinc-plated surface provides basic corrosion protection and long service life in workshop environments where humidity and coolant spray are present. The compact mass of 0.28 kg keeps inertia low and simplifies handling during installation, while the vertical foot mounting offers a secure base for perpendicular attachment to plates and fixture frames. The compact footprint enables denser placement of clamps in modular fixture plates, improving part accessibility without compromising strength. For users transitioning from temporary setups to permanent assembly fixtures, the combination of corrosion resistance and small form factor reduces the need for bulky supports and streamlines fixture design. Straightforward integration and low-maintenance operation The clamp is supplied with an M6x40 pressure spindle, enabling standardised adjustment and straightforward replacement with common workshop hardware. The simple mechanical design minimises wear points and facilitates routine checks; cleaning and occasional lubrication of the spindle keep the unit functioning consistently. Because the construction relies on proven mechanical principles rather than complex internals, downtimes are reduced and in-house maintenance remains feasible for small maintenance teams. Typical applications include small-part assembly, light machining jigs and test fixtures where fast engagement, clear force ratings and compact mounting matter more than elaborate automation. For dependable fixture clamping from Kukamet, contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 512-2 GTIN: 8680731502664 Manufacturer: Kukamet Facts Clamping force (max): 1,500 N Holding force (max): 1,700 N Weight: 0.28 kg Pressure spindle: M6x40 eClass: 21041716 ETIM: EC011973 Special features Zinc-plated Vertical foot mounting Category: Clamping Datasheet: 512-513-katalogseite.pdf FAQ What is the difference between clamping force and holding force? Clamping force is the active pressure applied during engagement; holding force is the resistance to movement once the clamp is engaged. The Push‑rod clamp 512 by Kukamet provides a maximum clamping force of 1,500 N and a holding force up to 1,700 N. Can this clamp be mounted on a fixture plate with standard fasteners? Yes. The vertical foot and compact design allow secure attachment with common fasteners; the supplied M6x40 pressure spindle supports standard workshop hardware and straightforward installation. Is the surface suitable for humid or coolant‑exposed environments? The zinc‑plated finish offers basic corrosion protection suitable for many workshop conditions. For aggressive environments, consider additional protective measures beyond the clamp’s standard plating. Which applications suit this clamp best? The clamp is intended for jigs, fixtures and light assembly where repeatable clamping and compact mounting are required. It fits scenarios prioritising secure workholding over heavy‑duty machining. How is maintenance handled for the unit? Maintenance is minimal: periodic cleaning and spindle lubrication preserve function. The simple mechanical design of the Kukamet clamp allows in‑house servicing with standard tools. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700 N Three-Point Push Rod Clamp With Horizontal Foot, Stainless Steel - Kukamet
The combination of stainless steel durability, compact weight and proven clamping and holding forces ensures reliable fixture performance and low maintenance intervals. Benefit from the robust horizontal mounting and the standard M6×40 pressure screw for fast integration into production jigs. Order the clamp directly via Metav Werkzeuge or request specification advice from the consultants. Push‑rod clamp 511 (S511-2) by Kukamet — stainless steel, horizontal foot A robust Push‑rod clamp 511 intended for secure clamping in workshop fixtures and light industrial jigs Stainless steel construction for corrosion resistance Horizontal foot for secure bench or fixture mounting Maximum clamping force 1,500 N Holding force up to 1,700 N per clamp Reliable clamping where space is limited Lightweight yet sturdy, this rod clamping device delivers dependable performance in tight setups. With a maximum clamping force of 1,500 N and a holding force of 1,700 N, the unit secures components during assembly, testing and short-cycle production tasks. The compact mass of 0.28 kg minimises added load on movable fixtures and reduces inertia during automated sequences, supporting faster cycle times without compromising grip. The performance figures provide a clear basis for matching the clamp to specific workpiece geometries and process forces. Corrosion-resistant body for long service life Manufactured from stainless steel, the clamp resists corrosion and is suitable for use in humid environments or where frequent cleaning is required. The integrated M6×40 pressure screw gives a standardised interface for force transmission and simplifies replacement or adjustment procedures. Reduced maintenance needs and material longevity lower total cost of ownership for shops that require durable, low-maintenance components in daily operation. The stainless finish also supports consistent use in food-industry adjacent applications or damp production areas where plated parts would wear faster. Simple integration into jigs and fixtures The horizontal foot design allows straightforward mounting to plates, rails or fixture blocks, enabling a secure base that resists lateral loads. Installation uses common securing hardware and the clamp's geometry is suitable for incorporation into modular fixturing systems. The combination of horizontal base, standard pressure-screw thread and compact footprint makes it an economical choice for bespoke tooling where space optimisation and repeatability are priorities. The clamp is well suited to small-batch production, R&D rigs and repair benches requiring reliable repeat clamping. For specification support or to secure workshop-ready clamping from Kukamet, contact Metav Werkzeuge in Emmerich for expert advice and dependable supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: S511-2 GTIN: 8680731504330 Brand: Kukamet eClass: 21041716 ETIM: EC011973 Facts Maximum clamping force: 1,500 N Maximum holding force: 1,700 N Weight: 0.28 kg Pressure screw: M6×40 Special features Material: Stainless steel Mounting type: Horizontal foot Particularity: None Category: Spanner FAQ What clamping and holding forces are specified for this clamp? The push-rod clamp is specified with a maximum clamping force of 1,500 N and a holding force of 1,700 N, suitable for light industrial fixturing and assembly tasks. Is the construction suitable for humid or washdown environments? Yes, the stainless steel construction provides corrosion resistance, making the clamp appropriate for environments where regular cleaning or elevated humidity occurs. How is the clamp mounted to a fixture plate? The clamp uses a horizontal foot mounting arrangement that secures the unit to plates or rails with standard fasteners; the pressure interface is an M6×40 screw. Can the clamp be used in automated setups with frequent cycling? The low mass and robust mechanics of this clamp support frequent cycling in automated jigs, offering consistent repeatability for small to medium series production. Which applications are typical for this type of clamp? Common uses include assembly fixtures, test rigs, repair benches and any setup requiring compact, repeatable clamping with corrosion-resistant material. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17000N Holding Force Horizontal Base Clamp With Hook, 15000N Closing Force, Blackened Cast Body - Kukamet
Benefit from a robust cast-body design, 17 kN holding force and a horizontal-foot mount for reliable, repeatable fixture closure. Order the toggle latch clamp 341 directly via Metav Werkzeuge or ask our consultants if needed. Toggle Latch Clamp 341 — Kukamet toggle latch clamp with 17 kN holding force and horizontal base A compact Toggle Latch Clamp 341 designed for secure, heavy-duty holding in fixture and enclosure applications, complete with a horizontal-foot mounting for stable installation. 17 kN maximum holding force 15 kN closing force for secure clamping Horizontal-base for stable installation Cast-body with blackened finish and hook Engineered for predictable, high-performance clamping The clamp delivers a 17 kN holding force and a 15 kN closing force, values that describe the static load it resists and the actuation force generated when engaged. In practice, this means the latch provides a reliable mechanical lock for jigs, access panels and transport closures where consistent retention is required. The forces are quoted as peak capacities; selecting safety margins in fixture design ensures long service life and consistent results. Stable mounting and rugged construction reduce downtime With a horizontal base for mounting and a cast body finished in a blackened coating, the product combines dimensional stability with surface protection. The integrated hook and a 130 mm thread length allow fine adjustment during setup, while the clamp’s 1.85 kg mass contributes to vibration resistance in machining and assembly environments. These design choices reduce rework and the need for frequent retightening, supporting smoother production processes. Practical applications and straightforward specification checks The latch is intended for heavy-duty industrial use in fixtures, machine guards and transport closures where a secure, repeatable closure is essential. Its straightforward mechanical design supports easy integration into existing assemblies and simple replacement planning. For clarification on compatibility with specific jigs or mounting plates, technical drawings are available and Metav Werkzeuge can provide parts guidance and supply information by email or phone. Contact Metav Werkzeuge for tailored availability and technical advice on the Kukamet Toggle Latch Clamp 341 (SKU 341-4) and ensure rapid, reliable delivery from Emmerich. Technical data SKU: 341-4 GTIN: 8680731502428 Model: 341 Manufacturer: Kukamet Facts Weight: 1.85 kg Max holding force: 17,000 N (17 kN) Max closing force: 15,000 N (15 kN) Thread length: 130 mm Special features Material: blackened finish with cast body Mounting: horizontal foot Hook: with hook ECLASS: 21041718 ETIM: EC011973 Category: Clamps FAQ What load capacities should be assumed for fixture design? The Kukamet toggle latch clamp 341 specifies a maximum holding force of 17 kN and a closing force of 15 kN; for fixture design, engineers typically apply safety factors to these values when specifying retaining elements. Is the clamp suitable for vibrating environments? Yes, the cast-body construction and horizontal-foot mounting of the toggle latch clamp 341 (SKU 341-4) contribute to stable installation and good resistance to loosening under vibration when correctly mounted. Can the latch be adjusted on-site after installation? The latch features an adjustable hook and a 130 mm thread length that allow on-site fine-tuning of engagement height and tension during commissioning and later adjustments. What surface protection does the finish provide? The blackened finish on the cast body offers basic surface protection against handling and workshop conditions; the finish reduces visible wear and helps preserve functional surfaces over time. Which applications are best suited to this latch? The clamp is designed for heavy-duty closures such as jigs, machine guards and transport enclosures where repeatable, secure clamping is required; for specific use cases, refer to technical drawings or consult Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700N Holding Force Pushrod Clamp M6x40, Blackened Finish - Kukamet
The compact combination of a 1,500 N pressing force and a 1,700 N holding capacity makes this clamp a reliable choice for repeatable workholding; its M6x40 spindle and blackened finish ensure easy integration and long service life. Order the push-rod clamp 513 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 513 — compact lever clamp, 1.5 kN pressing force (Kukamet) The Push-rod clamp 513 is a compact lever clamp designed for secure, repeatable holding in machining and assembly applications. 1.5 kN pressing force 1.7 kN holding capacity M6x40 spindle thread Blackened, wear-resistant finish High-performance clamping for efficient machining The Kukamet rod clamp delivers a consistent pressing force of 1,500 N, which translates into reliable contact pressure for short-cycle production and fixture work. The specified holding capacity of 1,700 N provides a safety margin that reduces slippage risk under intermittent loads. Expressed in Newtons, these figures describe the actual force applied and retained by the device; such numeric values enable accurate fixture design and predictable process results. The result is shorter set-up times and fewer reworks when used as a fixed clamping element in jigs and fixtures. Space-saving fixture integration and simple mounting Thanks to the M6x40 spindle thread and the without foot configuration, the 513 model integrates easily into compact fixtures or can be fitted directly to tooling plates where base mounting is not feasible. At 0.2 kg the clamp adds minimal mass to assemblies, which helps maintain balance in rotating or moving fixtures and simplifies handling during operator setup. The compact form factor is particularly advantageous in congested tool zones or where several clamps must be positioned close together, enabling denser, more economical fixture designs and faster changeovers. Durable finish and low-maintenance operation A blackened (brunished) finish protects the clamp against surface wear and offers improved resistance to mild corrosive influences, reducing the need for frequent replacement or reconditioning. The mechanical design focuses on straightforward operation and easy access to the spindle for adjustment and alignment, which contributes to reduced maintenance intervals. For workshops seeking a dependable, compact clamping solution, this lever-style rod clamp combines straightforward handling with robust surface treatment to support continuous use in everyday production. Contact Metav Werkzeuge for application advice and to specify the Kukamet push-rod clamp 513 for your fixtures — our Emmerich team will assist with selection and delivery. Technical data Article number: B513-2 GTIN: 8680731505030 Manufacturer: Kukamet Facts Pressing force: 1,500 N Holding capacity: 1,700 N Weight: 0.2 kg Spindle thread: M6x40 Special features Finish: blackened (brunished) Mounting: without foot Category: clamp FAQ What clamping force does the Push-rod clamp 513 provide? The Kukamet Push-rod clamp 513 provides a pressing force of 1,500 N and a holding capacity of 1,700 N for secure workholding. How is the clamp mounted in a fixture? Mounting is carried out via the M6x40 spindle thread; the 513 is supplied without a foot to allow direct integration into compact fixtures. Is the finish resistant to workshop wear? Yes, the blackened (brunished) finish on the 513 improves surface wear resistance and reduces visible corrosion under normal workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700N Push Rod Clamp Zinc Plated, M6x40 Spindle, 1500N Thrust - Kukamet
Robust zinc-plated construction combined with measurable holding and pressing forces provides dependable clamping for repeatable production. The compact, lightweight design and M6x40 pressure spindle make integration into fixtures simple and efficient. Order the Schubstangenspanner 513 directly via Metav Werkzeuge or ask our consultants if needed. Schubstangenspanner 513 — Zinc-plated push-rod lever clamp, 1.7 kN holding force (Kukamet) The Schubstangenspanner 513 is a compact zinc-plated push-rod clamp intended for secure workpiece fixturing in light to medium-duty workshop and industrial applications Zinc-plated steel finish Up to 1,700 N holding force 1,500 N maximum pressing force Compact, lightweight 0.2 kg Reliable clamping for consistent processes The holding force of 1,700 N and a maximum pressing force of 1,500 N deliver quantifiable performance that minimises slippage and rejects during machining or assembly. These measurable values support production planning and quality control by allowing engineers to select a clamp that matches required clamping loads. The integral M6x40 pressure spindle gives precise contact adjustment, ensuring consistent force transmission and reducing the need for constant re‑setting. Fast installation and reduced set‑up time A lever-style push-rod design provides swift engagement and release, cutting fixture changeover times and increasing throughput. The unit’s compact and lightweight construction (0.2 kg) makes it easy to position in limited spaces and to retrofit into existing jigs where a base plate is not required — the clamp is supplied without foot, enabling direct in‑line mounting. This simplicity supports lean workflows and helps to reduce operator fatigue during repetitive clamping cycles. Corrosion protection and workshop suitability A zinc-plated finish offers basic corrosion resistance for general workshop environments, extending service life and maintaining reliable contact surfaces over time. The corrosion protection helps preserve functional surfaces where frequent handling or coolant mist may occur, lowering maintenance effort. Built for everyday industrial use, the component combines practical durability with straightforward operation, making it suitable for small-series production, repair shops and toolrooms seeking dependable fixturing. Choose the Kukamet 513 for consistent, measurable clamping performance and contact Metav Werkzeuge for procurement advice or to discuss integration into existing fixtures — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 513-2 GTIN: 8680731502718 Manufacturer: Kukamet Weight: 0.2 kg Material: Zinc-plated Mounting: Without foot Pressure spindle: M6x40 Facts Maximum pressing force: 1,500 N Maximum holding force: 1,700 N Weight: 0.2 kg Special features Push-rod lever clamp design Compact and lightweight for tight spaces Zinc-plated finish for corrosion protection Category: Clamps / Spanner FAQ What clamping forces can be expected from this clamp? The Kukamet Schubstangenspanner 513 provides a maximum pressing force of 1,500 N and a holding force up to 1,700 N, values that support reliable fixturing in light to medium-duty applications. Is the clamp suitable for direct in-line mounting? Yes, the unit is supplied without a foot, designed for direct in-line mounting where space is limited and a low-profile solution is required. Which spindle size does the clamp use for pressure adjustment? Adjustment is via an M6x40 pressure spindle, which allows fine control of contact position and clamping engagement. How compact is the clamp for retrofitting into existing jigs? At 0.2 kg and with a lever-style push-rod configuration, the clamp is compact and lightweight, making it straightforward to integrate into existing jigs and fixtures. Can this clamp withstand regular workshop conditions? The zinc-plated finish provides basic corrosion protection suitable for typical workshop environments, preserving functionality during routine use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
1700N Pushrod Clamp With Vertical Foot, Stainless Steel, 1500N Thrust - Kukamet
Stainless steel construction paired with a compact 0.28 kg body and up to 1,700 N holding force delivers dependable, corrosion‑resistant clamping for production jigs and workshop fixtures. Order the Push‑rod clamp 512 via Metav Werkzeuge or contact our consultants for tailored advice. Push‑rod clamp 512 by Kukamet — stainless steel, high holding force A robust stainless steel push‑rod clamp designed for vertical mounting in fixtures and small machining set-ups, offering precise pressure control and long service life. Stainless steel construction for corrosion resistance Max holding force 1,700 N for secure clamping Vertical foot mounting for space-saving set-ups Pressure spindle M6x40 for fine adjustment Reliable clamping that resists shop environments Built from stainless steel, this rod clamp provides a durable solution where exposure to coolant, oils or humid conditions is likely. The combination of 1,700 N holding force and a 1,500 N pressing force means components remain fixed under incidental loads and light machining operations, reducing rework and stoppages. The low mass (0.28 kg) of the unit allows quick repositioning on assembly jigs without compromising stability. For those unfamiliar with torque figures: holding force refers to the maximum lateral retention capability, while pressing force denotes the axial contact pressure applied by the spindle; both together determine how securely a workpiece is held during processing. Space-conscious mounting with precise adjustment The vertical foot design saves table area and permits installation on crowded fixture plates, locating the clamp close to the workpiece for improved stiffness. A pressure spindle M6x40 enables fine, incremental adjustment of contact pressure, so sensitive parts can be clamped without deformation. This feature simplifies set-up: the spindle is tightened to the required contact and the rod mechanism converts that input into a consistent clamping action. The compact profile suits common jigs and modular fixturing systems in production and small‑batch environments, where repeatability and quick changeovers are essential. Dependable performance backed by a trusted supplier Manufactured by Kukamet, the unit combines a straightforward mechanical design with materials that reduce maintenance effort and extend service intervals. The rod clamp's simplicity supports rapid visual inspection and replacement of wear parts if necessary, which contributes to predictable process uptime. Sourcing through Metav Werkzeuge ensures centralised procurement, reliable stock handling and professional after‑sales advice; this partnership supports workshops and industrial buyers who prioritise consistent supply and proven product quality. For corrosion‑resistant, high‑holding clamping from Kukamet, contact Metav Werkzeuge for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: S512-2 GTIN: 8680731504347 Material: Stainless steel Weight: 0.28 kg Facts Max pressing force: 1,500 N Max holding force: 1,700 N Pressure spindle: M6x40 Mounting type: Vertical foot eCl@ss: 21041716 ETIM: EC011973 Special features Category: Spanner / Clamp Compact design for fixture integration Suitable for production and workshop use SKU: S512-2 FAQ What clamping capacity does this rod clamp offer? The clamp delivers a maximum holding force of 1,700 N and a pressing force of 1,500 N, which allows secure fixation of typical jig and fixture components when using the Push‑rod clamp 512. Can the clamp be mounted on a fixture plate with limited space? Yes, the vertical foot mounting and compact housing make the clamp suitable for constrained set‑ups and modular fixturing where table area is at a premium. How is the clamping pressure adjusted? Adjustment is made via the pressure spindle (M6x40); turning the spindle changes contact pressure incrementally, enabling delicate parts to be clamped without damage. Is the material appropriate for workshop environments with coolant or oil exposure? The stainless steel construction resists corrosion from common coolants and workshop contaminants, supporting longevity and minimal maintenance. Which applications suit this clamp best? The clamp is intended for assembly fixtures, jigs and light machining tasks that require repeatable, compact clamping solutions; its low weight and simple mechanics favour quick set‑ups and frequent reconfiguration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com