Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
200mm Three-Point Lathe Chuck, 3-Jaw, 3600 kgf Clamping Force, 2000 rpm - Vertex
Take advantage of the combination of high clamping force, tight concentricity and compatibility with common turning setups for uninterrupted production. Order the chuck directly via Metav Werkzeuge or consult the technical advisors for specification support and delivery. VSC-8 three-jaw chuck by Vertex — 200 mm, 3600 kgf VSC-8 three-jaw chuck is a heavy-duty lathe chuck engineered for secure, concentric clamping in turning and workshop production. 200 mm nominal diameter 3600 kgf high clamping force Accuracy 0.03 mm runout Secure clamping for consistent machining results The three-jaw chuck is designed to maintain grip on cylindrical and hexagonal workpieces through a high clamping force of 3600 kgf, reducing slippage during heavy cuts. The specified 0.03 mm value describes radial deviation at the gripping surface (runout), a key indicator of concentricity that directly affects finish quality and tool life. By keeping runout low, fewer rework cycles are required and dimensional tolerances are met more reliably, which supports stable process planning and predictable output. Built for high-speed turning and reliable throughput Constructed for shop-floor operation, the chuck is rated to a maximum of 2000 r.p.m., enabling higher material removal rates where safe working envelopes permit. With a 200 mm nominal diameter, larger components can be held without auxiliary fixtures, increasing setup efficiency. Balanced performance at elevated speeds minimises vibration; the result is improved surface finish and extended cutter life, translating technical capability into measurable production advantages. Traceability, brand trust and application fit Produced by Vertex, the component combines workshop compatibility with documented identification for procurement and inventory control. The item is supplied under SKU VSC-8 and carries a GTIN for traceable logistics and quality records. For purchasers seeking a reliable chuck for repetitive turning tasks, the combination of documented accuracy, rated speed and high clamping force provides a robust basis for machine planning. Metav Werkzeuge acts as a local quality filter and distribution partner in Europe, ensuring consistent supply and expert guidance for integration. For machining tasks that require repeatable, high-force clamping, contact Metav Werkzeuge for a technical consultation on Vertex's VSC-8 three-jaw chuck — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and delivery from Emmerich. Technical Data Article number: VSC-8 Manufacturer: Vertex Machinery Works Co., Ltd. GTIN: 4061905096068 ECLASS: 21020590 Facts Diameter: 200 mm Max speed: 2000 r.p.m. Clamping force: 3600 kgf Accuracy (runout): 0.03 mm Special features Three-jaw design Suitable for turning applications SKU: VSC-8 FAQ What sizes of workpiece can be clamped with this chuck? The VSC-8 three-jaw chuck accommodates workpieces up to a nominal diameter of 200 mm and is intended for standard turning operations. What does the specified accuracy of 0.03 mm mean in practice? An accuracy of 0.03 mm refers to radial runout, indicating the maximum deviation of the clamped centre from true rotation; lower runout supports tighter concentricity and better surface finish. Is the chuck suitable for heavy-duty clamping tasks? Yes, the chuck provides a rated clamping force of 3600 kgf, which is suitable for demanding turning cuts when used within the machine and tooling limits. What maximum spindle speed is recommended for this chuck? The component is rated to a maximum of 2000 r.p.m.; appropriate balancing and machine compatibility checks are advised before high-speed use. How is the product identified for purchasing and inventory purposes? The item is listed under SKU VSC-8 and GTIN 4061905096068, enabling clear traceability in procurement and stock systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Tool Holder SK40 Table Block 12-Slot, Polypropylene Black - TECWERK
Take advantage of a durable, polypropylene construction combined with SK40 compatibility for orderly tool storage and faster changeovers; order directly via Metav Werkzeuge or consult the team for application advice. Tool holder SK40 — 12-way polypropylene desk block, 360×245×200 mm (TECWERK) A Tool holder SK40 built to organise SK40 toolholders at the workshop bench, offering robust protection and resistance where coolants and mild acids are present. SK40-compatible holders organised safely Polypropylene, shock- and break-resistant Acid- and coolant-resistant construction Space-saving 360×245 mm bench footprint Reduce downtime with organised SK40 tool storage The compact bench block is designed to speed up tool changes by keeping all SK40 holders immediately accessible and visible. By avoiding misplaced holders and unnecessary searches, the system contributes to measurable efficiency gains during production runs. The 360×245×200 mm footprint combines a small workplace presence with orderly storage, making tool retrieval quicker and reducing cycle interruptions in mixed-production environments. Work reliably in wet or chemically exposed areas Constructed from polypropylene, the block resists shock and breakage and stands up to routine exposure to coolants and many workshop acids. This material choice ensures long-term dimensional stability and makes routine cleaning straightforward, so hygiene and maintenance cycles are shortened. The acid- and coolant-resistant properties protect both the block and the mounted holders, preserving tool integrity and minimising corrosion-related downtime. Compact, lightweight design that supports flexible workshop layouts At approximately 0.48 kg, the block is light enough to reposition while remaining stable on the bench. The shallow footprint permits placement close to machining centres, enabling ergonomic tool changes and optimised work flow without sacrificing bench space. The design supports tidy workflows, freeing up room for clamping or inspection tools and contributing to an organised, safe workspace. Simple upkeep and broad suitability across workshops The bench block accepts standard SK40 toolholders and requires no special maintenance beyond periodic cleaning; its shock-resistant design reduces the likelihood of damage from incidental knocks. The robust, hygienic material suits a range of industrial environments from light engineering to maintenance bays, offering consistent protection for expensive holders and helping to maintain tool life and cutting-edge performance. Choose the TECWERK SK40 bench block for reliable, space-efficient tool organisation and contact Metav Werkzeuge for tailored advice or rapid dispatch from Emmerich. Technical data Article number: 9000453681NW Type: Tool holder Brand: TECWERK Facts Width: 360 mm Depth: 245 mm Height: 200 mm Weight: 0.48 kg SKU / UID: 9000453681NW Special features Material: Polypropylene Colour: black Execution: Desk block, 12-way Mounting: for SK40 toolholders Resistance: acid- and coolant-resistant Mechanical: shock- and break-resistant FAQ Which toolholders fit this bench block? The bench block accepts standard SK40 toolholders; the design secures each holder in an organised layout suitable for machining environments. Is the block suitable near coolant systems? Yes, the polypropylene construction is acid- and coolant-resistant, making the bench block appropriate for use in wet machining zones. How should the block be cleaned and maintained? Cleaning requires only routine wiping with compatible detergents; the material resists common workshop fluids and is designed for low-maintenance operation. Can the bench block be relocated between workstations? The lightweight design (approx. 0.48 kg) allows easy repositioning on the workbench to support changing workflow demands. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
200mm Universal Jaws With Prism Stop For Round Parts, 0.01mm Accuracy - Vertex
Take advantage of precise measurement support and secure clamping: the compact Universal Jaws with Stop deliver repeatable holding thanks to the prism stop for round parts and an accuracy to two decimal places. Combine stable mass and compact dimensions for reliable workshop measuring, and order via Metav Werkzeuge or consult the sales team for application advice. Universal Jaws with Stop VWSJ-8 — prism stop for round workpieces, accuracy to 0.01 The Universal Jaws with Stop are a clamping accessory designed to support precise measuring and repeatable holding in workshop and inspection tasks, compatible with calipers and bench setups where jaw width falls within the 200–210 mm range. Precision clamping with 0.01 accuracy Prism stop for secure holding of round parts Compatible with calipers 200–210 mm jaw width Solid 4.2 kg construction for stable measuring Accurate measurement support that reduces rework The accessory provides a measurable improvement in repeatability by offering an accuracy rating to 0.01, which corresponds to consistent positioning across repeated setups. This level of fineness is beneficial where dimensional tolerances are tight and measurement drift must be avoided. The design supports common precision workflows by aligning workpieces to a predictable datum; the result is fewer re-measurements and a smoother inspection routine. Integrating the clamping accessory into a measuring station improves throughput without sacrificing traceability, because parts are presented in a stable and reproducible orientation. Secure handling of cylindrical and irregular parts A dedicated prism stop is incorporated to cradle round workpieces securely, preventing rotation and lateral slip during measurement or light machining tasks. The prism function converts a potentially unstable contact into a positive three-point support, improving contact consistency compared with flat jaws alone. For inspection tasks that require the same diameter to be gauged repeatedly, this feature enhances repeatability and reduces the risk of part deformation caused by uneven clamping forces. The accessory therefore suits workshops and inspection benches that process shafts, pins or turned components. Stable construction for dependable workshop use With compact external dimensions of 245 x 42 x 76 mm and a measured mass of 4.2 kg, the component provides a low centre of gravity and resistance to vibration during handling and measurement. The physical weight contributes to a steady measuring reference, especially when clamped into a bench vice or mounted on a work fixture, and the compact footprint leaves room for adjacent tools or instruments. The overall specification suits regular use in production-support roles, providing a balance between robust performance and easy integration into existing setups. Reliability in daily operations supports production continuity and reduces unexpected downtime. Contact Metav Werkzeuge for a compatibility check and delivery details from our Emmerich stock to ensure the VWSJ-8 fits the intended measuring system Technical data SKU: VWSJ-8 GTIN: 4061905092541 Designation: Universal jaws with stop Special feature: Prism stop for round workpieces Facts Dimensions: 245 x 42 x 76 mm Weight: 4.2 kg Accuracy: 0.01 Suitable for caliper jaw width: 200–210 mm Special features Prism stop for secure holding of cylindrical parts Universal jaw configuration with integrated stop Compact footprint for bench and fixture integration FAQ How does the prism stop improve measuring repeatability? The prism stop integrated into the Universal Jaws with Stop provides defined three-point support for round workpieces, improving repeatability and making the VWSJ-8 more reliable for repeated diameter checks. Is the accessory compatible with standard precision calipers? Yes. The VWSJ-8 is designed for use where caliper jaw width is between 200 and 210 mm, allowing straightforward mounting alongside many precision calipers and measurement fixtures. What level of measurement consistency can be expected? The jaws provide measurement support rated to 0.01, offering fine positional consistency suited to inspection tasks that require two-decimal reproducibility. Can the jaws be used for heavier or obstructive parts? The solid 4.2 kg construction of the VWSJ-8 gives a stable contact base; for very heavy workpieces, additional fixturing is recommended to ensure safe clamping and unchanged measurement results. What are the physical dimensions and footprint of the accessory? Dimensions are 245 x 42 x 76 mm, providing a compact footprint that is compatible with bench vices and measuring stations without occupying excessive space. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Universal Jaws With Soft Stop For Irregular Parts, 0.01mm Accuracy - Vertex
Take advantage of the combination of reliable 0.01 mm accuracy and a soft stop that adapts to irregular shapes for consistent measurement results; order the item directly via Metav Werkzeuge or consult our specialists for assistance. Universal Jaws with Stop (VWSJ-R200) – adaptable contact for precision calipers The Universal Jaws with Stop are an attachment for workshop calipers, engineered to provide adaptable contact and consistent readings when measuring irregular or non‑planar workpieces. Soft stop for irregular workpieces Compatible with calipers, jaw width 200–210 mm High accuracy 0.01 mm SKU VWSJ-R200, Vertex manufacturing Accurate contact on uneven surfaces improves repeatability The integrated soft stop reduces localised point loading on uneven components, producing a more consistent measuring interface than rigid jaws. By distributing contact pressure, the accessory helps to maintain repeatability across multiple measurements and limits deformation on delicate parts. This effect is particularly valuable in short inspection runs and routine quality checks where small variances can lead to rework. The compliant contact surface is designed to adapt to contours without compromising the measuring process, supporting reliable readings that align with modern metrology expectations. Direct compatibility reduces setup time in the workshop Designed for calipers with a jaw width 200–210 mm, the attachment slots into existing measuring setups to expand functionality without extensive modification. The straightforward fitment minimises downtime during tool changes and enables quick deployment at the inspection bench, which supports lean workflows. For measurement systems where fast, repeatable checks are required, the accessory provides a practical way to increase versatility. Clear identification via the VWSJ-R200 SKU simplifies ordering and inventory management for procurement teams. Precision results that support production quality With a documented accuracy of 0.01 mm, the accessory contributes to dependable measurement traces and supports decision‑making in both production and quality assurance. Manufactured to Vertex standards, the component integrates into standard metrology practices and facilitates comparability between inspection results. By improving contact stability on irregular pieces, the product helps to reduce false rejections and supports more efficient process control, indirectly contributing to lower scrap rates and better end‑product consistency. For measurement tasks that demand adaptable contact and consistent accuracy, request the VWSJ‑R200 Universal Jaws with Stop from Metav Werkzeuge — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and delivery from Emmerich. Technical Data Article number: VWSJ-R200 GTIN: 4061905089787 Name: Universal Jaws with Stop Facts Dimensions: 245 x 42 x 76 mm Accuracy: 0.01 mm Jaw width compatibility: 200–210 mm Special features Soft stop for irregular workpieces Suitable for calipers (jaw width 200–210 mm) Manufacturer: Vertex FAQ Which calipers are compatible with these jaws? The accessory fits calipers with a jaw width of 200–210 mm and is supplied under the SKU VWSJ‑R200 for easy identification. How does the soft stop affect measurement results? The soft stop provides compliant contact that evens out pressure on uneven surfaces, improving repeatability and reducing the risk of part deformation during measurement with the Universal Jaws with Stop. Is the stated accuracy of 0.01 mm achievable in workshop conditions? Under correct setup and stable measuring conditions, the 0.01 mm accuracy is attainable; consistent fixturing and proper use of the attachment support reliable inspection outcomes. Can the jaws be used for delicate or soft materials? Yes, the adaptable contact of the soft stop is particularly suited to delicate substrates, where rigid contact could otherwise cause marks or deformation when measured with calipers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Vertical Clamp Three-Point, 3,000 N Closing Force, Massive Holding Arm - Kukamet
Take advantage of a compact, robust clamping solution that combines a massive 200 mm holding arm, a proven safety locking mechanism and high clamping performance for reliable fixture processes; order the clamp directly via Metav Werkzeuge or contact our consultants for specification support. Vertical clamp 211 — Vertical toggle clamp with 200 mm arm and 3,000 N clamping force (Kukamet) Vertical clamp 211 is a compact fixture clamp for production and workshop jigs, engineered for repeatable vertical clamping tasks with a horizontal foot mounting arrangement Massive 200 mm holding arm Safety locking mechanism Clamping force 3,000 N Compact weight 0.89 kg Robust design that keeps fixtures steady The clamp features a massive holding arm that provides mechanical stability for repeated cycles, making it suitable for assembly jigs and small-batch production. With its blackened finish, the component resists surface wear while presenting a low-glare appearance on the shop floor. The solid construction translates into consistent contact pressure and reduced setup variability, which benefits processes that demand repeatability rather than cosmetic perfection. The combination of sturdy materials and straightforward geometry supports quick, secure positioning in modular fixture systems. Consistent clamping and secure locking for safe workflows Engineered for reliable force transmission, the device delivers up to 3,000 N clamping force and a 3,300 N holding force, values that enable secure retention of workpieces during machining, brazing or inspection operations. The integrated safety locking prevents unintentional release during handling, reducing the risk of workpiece displacement. This mechanical safeguard simplifies compliance with shop-floor safety practices while maintaining cycle speed — a rational benefit for operations where throughput and operator safety must align. Simple installation and space-conscious mounting Fitted with a horizontal foot mount, the clamp integrates directly into base plates and fixture blocks without complex adapters. The 200 mm arm reach allows for versatile placement relative to the workpiece, while the low weight of 0.89 kg keeps the overall fixture mass minimal. For system integrators and workshop managers, these attributes reduce fixture redesign time and simplify inventory, enabling faster line changes and fewer bespoke parts. The clamp’s geometry also aids accessibility, so tool paths and inspection probes are less likely to be obstructed. Practical advantage for everyday workshop use As a vertical toggle clamp, the unit is aimed at users who require robust performance in a compact footprint. The clear mechanical function — fast actuation, secure hold, and a visible locked state — supports operator confidence and reduces handling errors. The product’s straightforward mechanics mean maintenance is limited to routine checks and lubrication, contributing to low total cost of ownership in a pragmatic, long-term perspective. Specification transparency and reliable supply from Metav help ensure the clamp can be sourced and replaced with minimal disruption. Discuss fixture requirements with Metav Werkzeuge for the Kukamet Vertical clamp 211 (SKU B211-4-D-L-C3): call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored technical advice and order support Technical Data Article number: B211-4-D-L-C3 EClass: 21041717 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 200 mm Clamping force max: 3,000 N Holding force max: 3,300 N Weight: 0.89 kg Special features Horizontal foot mount Massive holding arm Safety locking mechanism Blackened finish Vertical toggle clamp FAQ What clamping forces does the Vertical clamp 211 provide? The Kukamet Vertical clamp 211 offers a clamping force up to 3,000 N and a holding force of 3,300 N for secure workpiece retention. Is the clamp suitable for integration into modular fixtures? Yes, the horizontal foot mounting and 200 mm arm length make the Vertical clamp 211 well suited for modular fixture plates and jig assemblies. What surface finish and durability features does the clamp have? The clamp is supplied with a blackened finish that reduces surface glare and improves resistance to everyday wear on the shop floor. How heavy is the unit and does it affect fixture dynamics? Weighing 0.89 kg, the vertical toggle clamp minimises added mass while providing the mechanical stability required for repeatable clamping. Does the product include a locking feature to prevent accidental release? The Kukamet Vertical clamp 211 is fitted with a safety locking mechanism that secures the clamped position during handling and processing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With 3,000N Thrust, Massive Holding Arm & Safety Lock, Black Oxide Finish - Kukamet
Rely on the combination of high holding force and a massive holding arm to secure workpieces reliably in repetitive clamping operations; the compact 200 mm arm and vertical foot make the clamp easy to integrate into fixtures. Order directly via Metav Werkzeuge or consult our advisors for a tailored recommendation. Vertical clamp 212 by Kukamet — 200 mm arm, 3,300 N holding force The Vertical clamp 212 is a compact vertical-action clamp designed for secure holding in fixture and workshop applications where repeatable clamping and space-saving mounting are required. Massive holding arm with safety lock 200 mm arm for extended reach Holding force up to 3,300 N Vertical foot mounting for secure fixing Secure, repeatable clamping for production use The 212 is engineered to deliver dependable, repeatable clamping through a combination of robust mechanics and a positive locking mechanism. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device provides a stable grip for short-cycle operations and fixture work. The massive holding arm and integrated safety lock reduce the risk of accidental release, which improves process reliability and operator safety. Technical details such as force ratings are stated to help planners assess suitability for specific clamping loads. Compact integration and durable surface treatment A lengthened 200 mm arm offers greater reach without adding significant bulk, allowing the clamp to be positioned where access is limited. The unit is finished in a blackened finish, which provides a hard-wearing surface that resists light wear and gives a consistent appearance across toolroom equipment. Designed for vertical foot mounting, this clamp is suited to fixed fixtures and modular tooling plates, supporting clean, space-saving integration into benches and jigs. Its low mass keeps additional load on the fixture to a minimum while maintaining rigidity. Practical handling, maintenance and application notes Operation follows classic lever-clamp principles, giving fast actuation and clear open/closed positions; the safety lock ensures the arm remains secure during machining or handling. The compact design and modest weight make the clamp suitable for a variety of applications, from small assembly jigs to larger fixture arrays. Routine maintenance is limited to simple lubrication and inspection of the locking mechanism; this minimises downtime and supports consistent performance. Where exact alignment is required, the clamp’s geometry supports straightforward datum referencing in fixtures. For reliable, workshop-ready clamping from Kukamet, contact Metav Werkzeuge for technical guidance and fast supply from Emmerich. Technical data Article number: B212-4-D-L-C3 Manufacturer: Kukamet Model: 212 Product type: Vertical clamp Facts Arm length: 200 mm Weight: 0.785 kg Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Special features Mounting: vertical foot Massive holding arm Safety lock incorporated Finish: blackened finish Story trigger: lever clamp design FAQ What clamping forces does the vertical clamp provide? The Vertical clamp 212 from Kukamet offers a maximum holding force of 3,300 N and a pressing force of 3,000 N (SKU B212-4-D-L-C3), values intended for evaluating load capacity in fixture design. Is the clamp suitable for installation on custom fixtures? Yes, the clamp’s vertical foot mounting and 200 mm arm length make the unit suitable for integration into custom jigs and tooling plates where vertical clamping is required. How does the safety lock work and why is it useful? The safety lock secures the massive holding arm in its closed position, preventing accidental release during handling or machining; this feature enhances operational safety and repeatability for Kukamet vertical clamps. What surface treatment does the clamp have and what are the benefits? The clamp is supplied with a blackened finish, which offers a durable, low-reflective surface that helps resist minor wear and provides a uniform toolroom appearance. What maintenance is required to keep the clamp operating reliably? Maintenance is limited to periodic lubrication of moving parts and inspection of the locking mechanism; these simple steps preserve function and reduce the likelihood of unscheduled downtime. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Horizontal Base, 3 000N Thrust, 3 300N Hold, Massive Arm & Safety Lock - Kukamet
Take advantage of a robust galvanised construction, a 200 mm holding arm and a dependable safety locking mechanism to secure workpieces with up to 3,300 N holding force; order the vertical clamp directly via Metav Werkzeuge or consult our advisors for application advice. Vertical clamp 211 — Kukamet vertical clamp with 200 mm arm and safety lock Vertical clamp 211 is a compact lever-operated vertical clamp designed for fast, repeatable positioning and secure workpiece retention in workshop and light industrial environments. Galvanised steel construction 200 mm holding arm for extended reach Safety locking mechanism for secure clamping Up to 3,300 N holding force Engineered for dependable, repeatable clamping The clamp is built from galvanised steel, providing corrosion resistance and long service life in workshop settings. The 200 mm arm increases reach without sacrificing rigidity, enabling consistent clamping across a range of component sizes. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device delivers measurable clamping performance; these values indicate the force available to hold a workpiece and the peak force the mechanism can apply during clamping. The compact mass of 0.89 kg keeps the system light enough for fixture assemblies while contributing to swift manual operation. Versatile mounting and clear application benefits Fitted with a horizontal foot, the clamp can be mounted to benches, jigs or fixture plates where a vertical clamping action is required. The lever-style operation provides immediate engagement, reducing cycle times compared with multi-component clamping systems. The galvanised finish eases integration into mixed-material environments, while the solid holding arm and simple mounting make the component suitable for production fixtures, repair benches and small-series assembly. The straightforward design minimises maintenance needs and keeps downtime to a minimum, supporting continuous workflows. Safety and usability that reduce process risk A dedicated safety locking mechanism prevents unintentional release, improving operator safety and protecting sensitive parts during machining or handling. The massive holding arm and secure lock together reduce the likelihood of slippage under load, which is particularly valuable when working with irregular or heavy components. The clamp’s manual actuation means no additional power source is required; this reduces complexity and avoids hidden operating costs. For teams seeking reliable, low-maintenance clamping, the device provides a predictable and safe solution. Discuss application-specific needs with Metav Werkzeuge or request procurement support for the Kukamet vertical clamp 211 — available from our Emmerich distribution with expert advice and reliable delivery Technical data SKU: 211-4-D-L-C3 GTIN: 8680731501360 Brand: Kukamet Weight: 0.89 kg Facts Arm length: 200 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety locking mechanism FAQ What materials can this clamp be used with? The Vertical clamp 211 from Kukamet is suitable for a wide range of workshop materials; the galvanised steel body and robust arm make it appropriate for common metals and fabricated parts in general clamping tasks. How does the holding force differ from the pressing force? The stated holding force (3,300 N) describes the clamp’s capacity to retain a workpiece under load, while the pressing force (3,000 N) indicates the maximum force applied during the clamping action on the Vertical clamp 211. Can the clamp be mounted in different fixture arrangements? Yes. The clamp features a horizontal foot for straightforward mounting to tables, fixture plates or jigs, enabling flexible placement in assembly and machining setups. Is the clamp suitable for frequent manual operation? The lever-operated design and low mass make the unit well suited to manual, repetitive use; the solid arm and safety lock support durability in repeated clamping cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Horizontal Base, Massive Support Arm, 3 000N Thrust / 3 300N Hold - Kukamet
Benefit from a compact combination of a solid 200 mm holding arm, galvanised corrosion protection and a high clamping capacity for dependable fixture work; the result is faster set-up times and consistent production results. Order the vertical clamp 211 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 211 — galvanised vertical toggle clamp with 200 mm arm (Kukamet) Vertical clamp 211 is a compact vertical toggle clamp designed for fixture and jig applications where a horizontal base and a sturdy holding arm ensure repeatable, secure workholding. Solid 200 mm holding arm Galvanised corrosion protection Horizontal base for stable mounting Holding force up to 3,300 N Faster, more reliable clamping for repetitive tasks The robust design of this clamp reduces setup time and minimises rework. The solid holding arm provides a stable contact area that maintains position under load, while the horizontal base enables straightforward, secure mounting to jigs and fixtures. With a 200 mm arm and a total weight of 0.924 kg, the unit balances reach and manoeuvrability, making it suitable for assembly benches and production fixtures alike. The construction supports repeatable clamping actions, which improves throughput and reduces the need for frequent adjustments. High clamping and pressing capacity for demanding operations Engineered for consistent force delivery, the clamp offers a pressing force of 3,000 N and a holding force of 3,300 N, providing a clear performance advantage for medium-duty applications. These figures indicate the clamp’s ability to resist both shear and tensile forces during processing, so components remain stable during manual and semi-automated operations. The galvanised finish adds a layer of protection against corrosion, extending service life in humid or workshop environments and ensuring dependable mechanical behaviour over many cycles. Simple integration and durable materials reduce lifetime costs Constructed from galvanised steel, the clamp integrates easily into existing fixtures and tooling layouts. The horizontal mounting arrangement simplifies positioning on plates and bases, while the compact footprint keeps work areas accessible. Because the component is built for durability rather than frequent replacement, maintenance intervals lengthen and commissioning is quicker, supporting a favourable cost-benefit ratio in production settings. The combination of a robust arm and corrosion-resistant finish translates into less downtime and a steady contribution to operational efficiency. Request advice from Metav Werkzeuge to match the 211 vertical clamp to specific fixtures or production needs — our consultants can confirm compatibility and delivery options. Technical data SKU: 211-4-D-C3 GTIN: 8680731501339 Brand: Kukamet Model: 211 Facts Weight: 0.924 kg Arm length: 200 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Special features Material: galvanised steel Mounting: horizontal base Solid holding arm Compact vertical toggle clamp design FAQ What is the primary application of this clamp? The 211 vertical clamp is intended for fixture and jig work where stable, repeatable vertical clamping is required; the galvanised construction suits workshop environments. Can the clamp withstand humid or workshop conditions? Yes, the galvanised finish on the 211 provides corrosion protection that extends service life in typical workshop and production settings. What forces can be expected during operation? The clamp delivers a pressing force of 3,000 N and a holding force of 3,300 N, offering reliable resistance to movement during assembly and processing. Is the clamp suitable for retrofit into existing fixtures? The horizontal base and compact footprint of the 211 simplify integration into existing jigs and assembly plates; Metav Werkzeuge can advise on mounting requirements. Which SKU should be referenced when ordering or enquiring? Please refer to SKU 211-4-D-C3 and GTIN 8680731501339 when discussing this vertical clamp with distributors or Metav Werkzeuge. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Holding Arm And Safety Lock, Zinc Plated, 3,000N Thrust / 3,300N Hold - Kukamet
Take advantage of a compact, galvanised vertical clamp with a 200 mm arm and a secure safety lock to keep workpieces steady under high loads; its high holding capacity supports reliable cycle times and reduced rework. Order or request technical guidance directly via Metav Werkzeuge for a seamless integration into existing fixtures. Vertical clamp 212 — galvanised, 200 mm arm and safety lock (Kukamet) A robust Vertical clamp 212 for vertical mounting, designed to secure workpieces in production and workshop fixtures with a compact footprint and high holding capacity Galvanised steel construction 200 mm robust holding arm Safety locking mechanism Holding force up to 3,300 N Secure clamping for consistent production quality The Vertical clamp 212 provides a predictable hold that reduces part movement and rework. A 200 mm arm delivers reach while the combination of a controlled clamping action and a 3,300 N holding force ensures components remain stable during machining, assembly or inspection. The specified 3,000 N clamping force is designed to generate sufficient pressure for most fixture applications without excessive overloading, which supports repeatable processing and consistent output quality. Space-saving vertical mounting for easy integration Engineered for vertical mounting on fixtures, the clamp uses a vertical foot mounting arrangement that occupies little horizontal space and can be aligned in rows along tooling plates. Its compact mass (approx. 0.785 kg) and straightforward geometry allow quick placement in modular fixture systems, helping to streamline setup times. The galvanised finish offers straightforward corrosion resistance, making the clamp suitable for general workshop environments and mixed-material production lines. Robust construction that minimises downtime Made from galvanised steel with a massive holding arm and a mechanical safety lock, this clamp is built to withstand regular cycle use. The safety locking mechanism prevents accidental release under load, improving operator safety and process reliability. The durable finish and simple mechanism reduce maintenance intervals and spare-part needs, supporting long-term availability and lower total cost of ownership for shops and light industrial applications. For secure vertical clamping with proven holding power choose the Kukamet solution and contact Metav Werkzeuge for tailored technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 212-4-D-L-C3 GTIN: 8680731501742 Material: galvanised steel Mounting: vertical foot Special features: massive holding arm; safety locking mechanism Facts Arm length: 200 mm Weight: 0.785 kg Max clamping force: 3,000 N Max holding force: 3,300 N eClass: 21041717 ETIM: EC011973 Special features Galvanised finish Massive holding arm Safety locking mechanism Lever clamp application (lever clamp design) FAQ What clamping capacity does this clamp provide? The clamp delivers a maximum clamping force of 3,000 N and a holding capacity of up to 3,300 N, suitable for many fixture and assembly tasks where secure retention is required. Can the clamp be mounted on standard tooling plates? Yes, the vertical foot mounting is compatible with typical fixture plates and allows compact alignment within modular tooling arrangements. Is the finish suitable for workshop environments? The galvanised finish provides basic corrosion resistance for general workshop use and reduces the need for frequent surface maintenance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Holding Arm, 3.3kN Hold Force, 3kN Press Force - Kukamet
Take advantage of the robust 200 mm reach and up to 3,000 N clamping force for dependable workholding in small-series production and workshop settings; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 212 by Kukamet — sturdy vertical workholding with 200 mm arm and 3,000 N force A Vertical clamp 212 designed for upright installation where secure, repeatable clamping is required in machining, assembly and general fixture setups. Massive holding arm for stable clamping 200 mm reach for versatile positioning Up to 3,000 N clamping force Blackened finish for corrosion resistance Stable clamping for repeatable results The clamp combines a massive holding arm with a high-rated clamping force (3,000 N) to deliver consistent workpiece retention on jigging and machining operations. The specified holding force (3,300 N) refers to the maximum static retention capability that reduces micro-movement during machining, which in turn helps to maintain machining tolerances and reduce rework. This mechanical robustness translates into fewer stoppages and more predictable cycle times in production environments, making the device suitable where repeatability and process stability are priorities. Flexible mounting and precise positioning Equipped with a 200 mm arm, the device provides extended reach for fixtures that require clearance or off-centre clamping. The vertical foot mounting allows upright installation on tooling plates, benches or dedicated fixtures and supports compact footprint planning in workstations. At approximately 0.938 kg, the clamp balances structural strength with ease of handling during assembly into jigs. The blackened finish offers an additional protective layer against corrosion, extending service life in mixed workshop conditions while maintaining a modest aesthetic that integrates into industrial setups. Low-maintenance design built for workshops Designed for straightforward integration, the clamp’s plain mechanical construction reduces maintenance overhead compared with more complex hydraulic or pneumatic clamps. The massive arm construction minimises wear to pivot points and contact surfaces under normal operating loads, contributing to longer intervals between service events. For toolrooms and small production lines seeking robust, economical workholding, this solution offers a reliable option that supports steady throughput without necessitating specialised maintenance regimes. For reliable workholding solutions from Kukamet, contact Metav Werkzeuge for technical advice or to request the Vertical clamp 212 (SKU B212-4-D-C3) via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B212-4-D-C3 GTIN: 8682843522356 eClass: 21041717 ETIM: EC011973 Facts Arm length: 200 mm Weight: 0.938 kg Clamping force (max): 3,000 N Holding force (max): 3,300 N Versions / Special features Material/finish: blackened finish Mounting: vertical foot Design: massive holding arm Category: spanner / clamp Designation: Vertical clamp 212 FAQ What clamping force can be expected from this device? The Vertical clamp 212 delivers a maximum clamping force of 3,000 N with a holding capacity up to 3,300 N, providing secure retention for typical workshop applications. Is the clamp suitable for upright installation on a fixture plate? Yes, the device is supplied for vertical foot mounting, making the clamp suitable for installation on fixture plates, benches or dedicated uprights. How does the 200 mm arm affect application use? The 200 mm reach increases flexibility for off-centre clamping and allows clearance for tools and spindles, aiding in fixture layout and workpiece accessibility. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Holding Arm, 3.3kN Holding Force, Zinc-Plated - Kukamet
The sturdy design and galvanised finish deliver reliable clamping with up to 3,300 N holding force and a maximum pressing force of 3,000 N, making this vertical clamp ideal for repeatable fixture work. Benefit from a 200 mm arm and a massive clamping arm that improve rigidity and reduce setup time; order the clamp directly via Metav Werkzeuge or contact our advisers for application advice. Vertical clamp 212 — Kukamet vertical clamp with 200 mm arm and galvanised finish Vertical clamp 212 is a compact, high-force vertical clamping device intended for fixtures, jigs and general workshop use 200 mm arm length Massive clamping arm for rigidity Up to 3,300 N holding force Galvanised finish for corrosion resistance Secure, high‑force clamping for stable setups The 200 mm arm combined with a massive clamping arm ensures consistent contact pressure across the workpiece, providing secure positioning during machining or assembly. With a holding force of 3,300 N and a maximum pressing force of 3,000 N, the device reduces the risk of component movement under load, which helps to lower rework rates and improves process reliability. The compact footprint supports efficient use of bench or fixture space while maintaining robust performance. Durable construction that resists workshop wear Constructed in a galvanised finish, the clamp is protected against surface corrosion commonly encountered in busy workshop environments. The vertical foot mounting provides a stable base for integration into stations and jigs, and the unit’s modest mass of 0.938 kg keeps the assembly lightweight without compromising stiffness. This combination of durability and low maintenance supports continuous operation and extends service intervals. Fast, ergonomic operation for everyday use Designed with a lever‑style actuation concept, the clamp offers intuitive manual handling that speeds repetitive clamping tasks. The lever approach delivers fast engagement and clear tactile feedback for secure locking, which improves throughput on repetitive fixtures and simplifies operator training. The straightforward mechanical design also minimises adjustment complexity, enabling quick setup changes and shorter downtime between jobs. Practical integration into fixtures and production jigs The vertical clamping device suits a wide range of workshop and production environments where fixed, reliable clamping is required. Its compact measurements and standard mounting make it straightforward to fit into bespoke fixtures or retrofit onto existing plates. The galvanised surface and robust arm design provide predictable behaviour under repeated cycles, supporting stable processes and consistent part quality. Choose the Kukamet vertical clamp 212 for robust, repeatable clamping — order via Metav Werkzeuge in Emmerich or call +49 2822 7131930 for tailored application guidance Technical data SKU: 212-4-D-C3 GTIN: 8680731501711 eClass: 21041717 ETIM: EC011973 Facts Arm length: 200 mm Weight: 0.938 kg Maximum holding force: 3,300 N Maximum pressing force: 3,000 N Special features Galvanised material Vertical foot mounting Massive clamping arm Category: Clamp / Spanner FAQ What is the maximum holding force of this clamp? The vertical clamp 212 offers a maximum holding force of 3,300 N, suitable for demanding fixture tasks. Can the clamp be mounted on a fixture plate? Yes, the 212 is designed for vertical foot mounting and integrates readily into fixture plates and jigs. Is the surface protected against corrosion? The unit features a galvanised finish that provides enhanced resistance to surface corrosion in workshop environments. What benefits does the massive clamping arm provide? The massive clamping arm increases rigidity and improves repeatability, helping to maintain secure contact under load. Which model and SKU should be referenced when ordering? Please reference the Kukamet vertical clamp 212, SKU 212-4-D-C3, when placing orders or enquiring about specifications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Vertical Clamp With Massive Support Arm, 3,000N Thrust / 3,300N Holding Force - Kukamet
Take advantage of the combination of a massive holding arm, precise 3,300 N holding force and a compact 200 mm reach for reliable clamping in production and workshop setups. Order the clamp directly via Metav Werkzeuge or consult the team for application advice. Vertical clamp 211 – Vertical clamp with 200 mm arm and 3.3 kN holding force (Kukamet) the Vertical clamp 211 is a compact vertical clamping device designed for secure workholding in machinery, jigs and general workshop fixtures, combining a robust arm with a horizontal mounting foot for stable attachment. Massive holding arm for higher rigidity 3,300 N holding force for secure clamping 200 mm arm reach for extended grip Horizontal foot for straightforward installation Consistent clamping performance for machining operations The solid design delivers reliable clamping behaviour even under intermittent loads. With a rated holding force of 3,300 N and a maximum pressing force of 3,000 N, the device provides the physical capacity required for many light to medium machining and assembly tasks. The difference between holding and pressing force is deliberate: the higher holding value indicates the maximum static retention capacity, while the pressing figure refers to the actuation load — both values together ensure predictable performance in repetitive operations. This mechanical certainty supports fewer re-clamps and therefore steadier cycle times on the shop floor. Quick integration into existing fixtures and jigs A horizontal foot simplifies mounting onto plates and tooling blocks, reducing setup time and alignment work. The 200 mm arm extends the clamping reach without compromising stiffness thanks to the massive holding arm construction, which reduces flex during tightening. Engineers benefit from straightforward mechanical integration: the clamp can be fixed in a familiar orientation, requiring only basic mounting preparation and standard fasteners to achieve a secure hold. Durable finish and compact footprint for long service life Finished in a blackened coating, the clamp resists superficial wear and presents a low-maintenance surface that conceals minor abrasions from everyday handling. At under 1 kg in mass, the component brings robustness without significant added weight, allowing use in mobile jigs and fixtures. The compact footprint supports denser tooling layouts and helps conserve space on fixture plates, contributing to a tidier, more efficient production environment. Suitable applications and practical benefits The device is ideal for production jigs, assembly stations and CNC fixtures where a vertical clamping action is required. Its specification supports quick-change setups and repetitive production runs: the combination of stiff arm geometry and rated forces reduces the risk of part movement during drilling, milling or light presswork. The clamp’s form factor also facilitates incorporation into both manual and semi-automated processes, helping to standardise workholding across small workshops and larger workstations alike. For procurement or technical matching of the Kukamet vertical clamp 211, contact Metav Werkzeuge for precise delivery options and application guidance — Metav Werkzeuge provides expert advice and direct supply from Emmerich. Technical Data SKU: B211-4-D-C3 GTIN: 8680731507751 Manufacturer: Kukamet Facts Arm length: 200 mm Weight: 0.924 kg Holding force: 3,300 N Maximum pressing force: 3,000 N eCl@ss: 21041717 ETIM: EC011973 Special features Mounting: horizontal foot Massive holding arm Finish: blackened Category: Spanner FAQ What is the primary clamping capacity of the Vertical clamp 211? The Vertical clamp 211 provides a holding force of 3,300 N and a maximum pressing force of 3,000 N, suited to light and medium production tasks. How is the clamp mounted to a fixture or plate? The clamp is mounted via a horizontal foot, allowing straightforward attachment to fixture plates and tooling blocks. What is the functional reach of the arm? The clamp features a 200 mm arm, combining extended reach with a robust arm design for reduced flex. Is the surface treatment suitable for industrial environments? Yes, the blackened finish offers basic surface protection against wear and is suitable for workshop conditions. Can the clamp be used in mobile jigs or portable setups? At approximately 0.924 kg and with a compact footprint, the clamp is practical for mobile jigs and portable fixtures. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Workpiece Stop With Teeth, T-Slot 16 mm - Vertex
Take advantage of a toothed locating profile and 16 mm T‑slot compatibility for reliable, repeatable clamping across machining cycles; the 200 mm height gives clearance for larger fixtures while the lightweight construction supports easy handling. Order the workpiece stop directly via Metav Werkzeuge or ask our consultants if needed. Workpiece stop VWS-125 — toothed locating stop for T‑slot tables (Vertex) Workpiece stop VWS-125 designed for secure positioning on machining and fixture tables, featuring a toothed profile for positive engagement in 16 mm T‑slots and a 200 mm overall height for versatile setup. T‑slot 16 mm compatible Toothed locating profile for positive grip 200 mm height for larger fixtures Lightweight at 1.1 kg for easy handling Consistent locating for repetitive machining The toothed locating profile delivers positive engagement with standard T‑slots, reducing slippage during machining and ensuring consistent part placement. By engaging directly with a 16 mm T‑slot, the stop converts table geometry into a reliable reference surface, which simplifies setup and shortens cycle-to-cycle variation. For shops that run serial operations, this means fewer re‑set checks and more predictable tolerances — an efficiency gain that translates into measurable production stability. Durable design that supports secure clamping Constructed to work with common machine tables, the stop's toothed profile provides mechanical interlock rather than relying solely on friction; this reduces movement under lateral forces and improves safety when loading heavier fixtures. The 200 mm height offers additional vertical clearance for bespoke clamping arrangements and allows the stop to be used with stacked supports or spacer blocks. The combination of positive locating and generous height supports robust fixturing strategies without altering established workholding plans. Practical handling and workshop integration At a weight of 1.1 kg, the component is light enough for quick repositioning while remaining substantial enough to resist accidental displacement during clamp-up. Compatibility with the 16 mm T‑slot standard enables straightforward integration into existing setups without additional adapters. Clear labelling with the SKU ensures traceability on the shop floor and in documentation, helping maintain orderly inventory and replacement routines. Why this stop helps production flow By converting table slots into reliable datum points, the stop reduces setup time and rework, increasing throughput and lowering per‑part processing cost. The toothed engagement supports applications where lateral forces or vibration are present, giving shops confidence in repeatability. When paired with a consistent clamping protocol, the component aids in achieving tighter process control across batches. Select the Vertex toothed workpiece stop VWS-125 via Metav Werkzeuge in Emmerich — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast delivery Technical data Article number: VWS-125 GTIN: 4061905093821 ECLASS: 21029210 Core specifications Height: 200 mm Weight: 1.1 kg T‑slot width: 16 mm Design & features Type: with teeth (toothed locating profile) Category: Vertex FAQ What table systems is this workpiece stop compatible with? The workpiece stop VWS-125 is compatible with tables that accept a 16 mm T‑slot, allowing direct mechanical engagement via its toothed locating profile. Can the VWS-125 be used for serial production setups? Yes, the toothed design of the Vertex workpiece stop VWS-125 provides repeatable locating for serial machining, reducing re‑set time and improving process stability. How heavy is the stop and how does that affect handling? The Vertex workpiece stop VWS-125 weighs 1.1 kg, making it easy to reposition while offering sufficient mass to resist movement during clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Workpiece Stop Without Teeth T‑Slot 16mm - Vertex
Combining a 200 mm height, a 16 mm T-slot interface and a toothless contact face, the VWS-123 delivers dependable, repeatable end stops for machining and fixturing applications; order the workpiece stop directly via Metav Werkzeuge or consult our specialists for integration advice. Workpiece stop VWS-123 — 200 mm height, 16 mm T-slot (Vertex) The Workpiece stop provides consistent end stops for machining and fixturing on T-slotted tables, designed for straightforward integration into workshop and machine setups. 200 mm height for versatile positioning Compatible with 16 mm T-slots Toothless clamping face for smooth contact Lightweight at 0.9 kg for easy handling Repeatable positioning that reduces setup time Engineered for reliable alignment, the VWS-123 workpiece stop secures components against a defined datum so that setups are repeatable across multiple runs. The 200 mm height offers an extended stop surface for taller or uneven workpieces, while the toothless contact face prevents marking on delicate parts. This combination supports faster fixturing and fewer adjustments, improving throughput on small-batch and serial operations. Simple compatibility with standard T‑slot tables The compact design is tailored to fit a 16 mm T‑slot, enabling immediate compatibility with many common machine tables and modular fixturing systems. The T‑slot interface allows secure mounting without complex adaptors, which simplifies retrofitting into existing workflows and reduces downtime during changeovers. Described dimensions and mounting type provide clear criteria for planners and workshop engineers when preparing fixtures. Lightweight handling and workshop practicality At 0.9 kg, the stop is easy to position and reposition by hand, making it suitable for bench setups and quick jigs as well as machine tool use. The toothless contact face allows safe contact with finished surfaces, reducing the risk of cosmetic damage while maintaining a stable end stop. Built for everyday workshop tasks, the device balances manoeuvrability with the dimensional control expected in production environments. Contact Metav Werkzeuge today for tailored advice on integrating the Vertex VWS-123 into existing fixturing — Metav’s team in Emmerich can advise on compatibility, delivery and application-specific solutions via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VWS-123 GTIN: 4061905084348 ECLASS: 21029210 Manufacturer: Vertex Core data Weight: 0.9 kg Height: 200 mm T‑slot: 16 mm SKU: VWS-123 Special features Type: Toothless (without teeth) Category: Vertex Image: vws-123-main.jpg FAQ What T‑slot size is required for mounting? The VWS-123 is designed for a 16 mm T‑slot, ensuring direct compatibility with tables and fixtures that use this standard slot width. Is the stop suitable for delicate or finished workpieces? Yes. The toothless contact face prevents surface marking, making the component suitable for parts where cosmetic integrity matters. How much does the device weigh and is it easy to handle? The stop weighs 0.9 kg, which allows manual positioning for quick setups and straightforward transfer between bench and machine use. Can the component support repeatable serial production setups? Its dimensional design, notably the 200 mm height and T‑slot mounting, provides the consistency needed for repeatable fixturing and short changeover times. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x117x75mm Soft Jaws For VQC Vices - Vertex
The combination of precision soft jaws, compact dimensions and substantial mass delivers secure, damage‑free clamping and steady set‑ups in repeat production. Order the VQC‑200L‑MJ soft jaws directly via Metav Werkzeuge or consult our advisors for application guidance. VQC-200L-MJ Soft Jaws for VQC vices — precision clamping, 200 × 117 × 75 mm VQC-200L-MJ soft jaws designed to protect workpieces and expand the clamping range of VQC vices for workshop and small‑batch production Precision‑machined soft jaws for secure clamping Compatible with VQC series vices Dimensions 200 × 117 × 75 mm for stable hold Robust construction, weight 13.08 kg Damage‑free clamping for delicate components Soft jaws are used to avoid surface damage and to increase contact area when holding non‑ferrous or finished parts. The soft jaws in this set are shaped to distribute clamping forces evenly, which reduces point loads that cause marring. For delicate workpieces, this means a reliable grip without additional protective fixtures, reducing handling steps and scrap rates. The result is consistent part quality and fewer process interruptions during repetitive tasks. Seamless integration with VQC vices for repeatable setups Designed for direct mounting on the VQC family of vices, these jaws permit rapid, repeatable fixturing. The tailored fit guarantees constant jaw alignment and parallelism, shortening setup times and improving throughput. For production environments where changeovers are frequent, the ability to restore a reference set quickly translates into measurable time savings and higher machine utilisation. Compatibility with the VQC line ensures predictable behaviour across multiple workstations. Faster changeovers and improved process stability The compact dimensions of 200 × 117 × 75 mm and the stated mass (13.08 kg) balance manoeuvrability with stability. The mass helps dampen vibration during machining, while the modest footprint makes swapping jaws straightforward on the shop floor. Reduced vibration contributes to better surface finish and longer tool life, while the manageable size supports efficient storage and handling in confined workspaces. Proven supplier and workshop benefits Manufactured by Vertex, these soft jaws bring established quality to everyday clamping tasks. Combined with Metav’s role as a European quality filter and distributor, customers benefit from dependable logistics and product availability. Metav’s offer is aimed at making precision tools accessible: a broad range of products and long‑standing supplier relationships reduce procurement complexity for shops and toolrooms, helping to maintain steady production. For workshop‑grade, damage‑free clamping with Vertex reliability, request the VQC‑200L‑MJ soft jaws from Metav Werkzeuge in Emmerich or contact our consultants for tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: VQC-200L-MJ GTIN: 4061905088230 ECLASS: 21029107 Facts Dimensions: 200 × 117 × 75 mm Weight: 13.08 kg Manufacturer: Vertex Special features Soft jaws for VQC vices Precision fit for repeatable set‑ups Suitable for protective workholding of delicate parts FAQ What workpieces are best held with these soft jaws? These soft jaws are suited to delicate or finished components where surface preservation is required; the VQC‑200L‑MJ set (Vertex) increases contact area and reduces point loading during clamping. Are the jaws compatible with all VQC models? Compatibility is intended for the VQC series; the VQC‑200L‑MJ is manufactured to match VQC vice mounting dimensions for consistent alignment. How do the dimensions influence workshop use? The 200 × 117 × 75 mm size offers a compact footprint for small to medium parts while the 13.08 kg mass provides stability, helping to reduce vibration during machining. Can these jaws be reground or modified? Modifying soft jaws is possible in principle to match specific workpiece contours; any machining should preserve safe clamping geometry. For advice, refer to Vertex guidance and Metav consultants. Is the VQC‑200L‑MJ suitable for high‑volume production? Yes. The precision fit and repeatability of the jaws support efficient changeovers and steady production runs, contributing to reduced setup times and consistent part quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x122x75mm Soft Jaws for VQC Vises, Reversible - Vertex
Improve clamping precision and protect delicate workpieces with the combination of soft replaceable contact surfaces and a precision fit for VQC-series vises; the robust construction supports consistent repeatability. Order or enquire via Metav Werkzeuge for tailored advice from our consultants. Soft Jaws VQC-200L-FJ — Soft replaceable jaws for VQC vises, precision fit (Vertex) A set of Soft Jaws VQC-200L-FJ created to protect sensitive components while providing accurate clamping on VQC-series vises in workshop and light production environments Protects delicate workpieces during clamping Precision fit to VQC-series vises Durable, replaceable soft contact surfaces Improved clamping accuracy and workpiece protection Soft clamping faces reduce marring and distribute pressure over a larger area, which helps to preserve surface finish on fragile parts. The soft jaws act as a sacrificial contact layer that is easily renewed when worn, extending the service life of the primary vice jaws. By combining a compliant contact surface with a precision fit to the vice, the solution lowers rework rates and supports stable part presentation for subsequent machining or measurement operations. This reduces downtime associated with part rejection and contributes to a more predictable production flow. Faster changeover and consistent repeatability Designed for quick replacement, the soft contact inserts minimise setup time between jobs while maintaining repeatable clamping locations. The combination of a tailored geometry and a secure mounting interface ensures consistent seating on the vice, which preserves datum alignment across repeated cycles. This repeatability is particularly valuable for small-batch runs and inspection tasks where positional accuracy and minimal handling are required. Reduced handling and faster changeovers translate into measurable efficiency gains on the shop floor. Workshop-friendly design and compatibility The component is sized for common workshop applications and integrates directly with the VQC family of vises. With compact external dimensions 200 x 122 x 75 mm and a mass of 3.61 kg, the item balances rigidity with manageable weight for handling and storage. Material and coating details are determined by the production batch; the overall design principle centres on protection, easy replacement and compatibility with existing clamping systems. For processes that require careful surface preservation or soft-fixturing solutions, these jaws provide a straightforward and reliable option. For ordering, technical clarification or to discuss suitability for specific applications, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; Metav's consultants will advise on matching Vertex products to workshop needs. Technical data Article number: VQC-200L-FJ GTIN: 4061905094743 ECLASS: 21029107 Facts Dimensions: 200 x 122 x 75 mm Weight: 3.61 kg Special features Soft, replaceable contact surfaces Designed for VQC-series vises Manufacturer: Vertex SKU: VQC-200L-FJ FAQ Are these jaws compatible with all VQC vises? The soft jaws are designed specifically for the VQC-series and will fit the matching vice models; compatibility should be confirmed against the vice model designation. Can the contact surfaces be replaced when worn? Yes, the design includes replaceable soft contact surfaces so that the primary clamping faces remain intact and service life is extended. What benefits do soft jaws offer for delicate parts? Soft jaws provide a compliant contact that reduces surface damage and spreads clamping forces, improving part preservation during machining or inspection. Is the VQC-200L-FJ suitable for repeated production cycles? The VQC-200L-FJ offers consistent seating and repeatability, making it suitable for repeated cycles where surface protection and positional stability are required. Which manufacturer produces these soft jaws? These soft jaws are produced by Vertex and supplied under the SKU VQC-200L-FJ. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x200mm Halogen Lamp Dust-Protected, 110/220/380/24V, Light IP67 Arm IP65, Cable 1.8m - Vertex
The combination of a dust-protected halogen light (IP67), a sturdy 200 x 200 mm arm and flexible multi-voltage supply ensures reliable inspection illumination in demanding workshop environments; order the Vertex VHL-300MR directly via Metav Werkzeuge or consult our specialists for system integration. Vertex VHL-300MR Halogen Lamp — Dust-protected inspection light with multi-voltage supply The VHL-300MR is a dust-protected halogen lamp designed for workshop inspection and assembly tasks, mounted on a 200 x 200 mm articulated arm for precise positioning. Dust-protected halogen lamp with IP67 light Sturdy arm 200 x 200 mm for flexible positioning Multi-voltage: 24 / 110 / 220 / 380 V available Includes 1.8 m connection cable Consistent inspection light for precise work The halogen unit delivers consistent, high-contrast illumination, making fine details easier to assess during visual inspection and assembly. The halogen technology offers steady colour rendering and instantaneous full output, which benefits tasks that demand accurate surface evaluation rather than intermittent lighting. Compatibility with 50 W, 55 W and 70 W bulbs allows adaptation of luminous intensity to the application, while preserving a predictable light characteristic that supports repeatable inspection results. Built for harsh workshop conditions and stable positioning Engineered for durability, the lamp head is rated IP67, providing dust protection and resistance to temporary immersion, while the supporting arm carries an IP65 rating for protection against dust and water jets. The articulated 200 x 200 mm arm gives controlled reach and positioning, and the lamp’s mass contributes to a stable mounting platform for inspection setups. These features reduce interruption from environmental contamination and prevent repositioning drift during precision tasks, supporting continuous production and quality assurance. Electrical compatibility and straightforward integration With selectable supply voltages of 24 / 110 / 220 / 380 V, the lamp can be integrated into a wide range of industrial and laboratory electrical systems without additional converters in many cases. The unit accepts common halogen bulb powers (50 W / 55 W / 70 W) and is supplied with a 1.8 m cable for immediate connection. This combination of multi-voltage capability and common bulb types simplifies commissioning and spares management in workplaces that run mixed equipment inventories. For dependable inspection lighting from a recognised manufacturer, request the Vertex VHL-300MR via Metav Werkzeuge or contact Metav Werkzeuge for tailored integration advice and delivery options Technical data Article number: VHL-300MR GTIN: 4061905089756 Manufacturer: Vertex Facts Weight: 3.6 kg Arm dimensions: 200 x 200 mm Voltage options: 24 / 110 / 220 / 380 V Special features Light protection: IP67 Arm protection: IP65 Bulb compatibility: 50 W / 55 W / 70 W Cable included: 1.8 m FAQ Which bulb powers are compatible with this lamp? The VHL-300MR accepts 50 W, 55 W and 70 W halogen bulbs, allowing adjustment of illumination intensity for different inspection tasks. Is the lamp suitable for dusty or damp workshop environments? Yes. The lamp head is rated IP67 and the arm is IP65, providing protection against dust ingress and water jets suitable for most workshop conditions. Can the light be used with different supply voltages on site? The unit supports 24 / 110 / 220 / 380 V, enabling integration into various electrical systems without extensive modification. How long is the connection cable supplied with the lamp? The VHL-300MR is supplied with a 1.8 m cable ready for immediate connection. Does the lamp provide stable positioning during fine inspection work? The articulated 200 x 200 mm arm and the lamp’s stable mass ensure precise and steady positioning for visual inspection and assembly tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x200x120mm Precision Right-Angle Clamping Square 0.005mm Accuracy, Alloy Steel - Vertex
Benefit from high-precision alignment and a robust alloy-steel build: the 0.005 mm accuracy, compact 200 x 200 x 120 mm footprint and substantial 14.3 kg mass deliver stable, repeatable clamping for machining and inspection tasks. Order the Precision Angle Plate directly via Metav Werkzeuge or consult our specialists for application advice. Precision Angle Plate VRS-85 (Vertex) — Alloy steel, 0.005 mm accuracy The Precision Angle Plate VRS-85 is a compact workholding plate engineered for accurate 90° set-ups in machining, inspection and layout operations. *High precision: 0.005 mm accuracy *Robust alloy-steel construction *Compact footprint: 200 x 200 x 120 mm *Stable 14.3 kg mass for vibration damping Consistent accuracy for reliable production Built for repeatable tasks, the angle plate provides a measured accuracy of 0.005 mm, which reduces setup variation and shortens inspection loops. The high metrological standard means parts can be repositioned with confidence, lowering rework and improving throughput. By using a rigid reference surface, the device supports precise squaring and fixturing; operators and quality staff benefit from reduced adjustment time and clearer traceability of results. Durable construction that supports machining demands Manufactured from alloy steel, the unit combines strength with dimensional stability under load. The solid mass of 14.3 kg dampens vibration, which protects cutting edges and enhances surface finish during light milling or drilling operations. The compact dimensions (200 x 200 x 120 mm) allow installation on machine tables and inspection benches without excessive workspace demands, while the robust material choice ensures a long service life in demanding workshop environments. Easy integration into inspection and fixturing workflows Designed as a pragmatic workholding solution, the plate fits standard clamping systems and inspection jigs, enabling rapid alignment of components for measurement or secondary operations. The simple geometry and flat datum faces make it suitable for both optical inspection and contact measurement tasks; this supports consistent workholding strategies and helps maintain quality goals across small-batch and prototype production. Documentation and drawing views are available to aid fixture design and machine planners. Choose the Vertex VRS-85 for precision clamping and contact Metav Werkzeuge for tailored advice and supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VRS-85 GTIN: 4061905096174 ECLASS: 21020601 Manufacturer: Vertex Facts Dimensions: 200 x 200 x 120 mm Accuracy: 0.005 mm Weight: 14.3 kg Special features Material: alloy steel Suitable for clamping and inspection workholding Images available: technical drawing and detail views FAQ What tolerance can be expected when using the angle plate for fixturing? The Precision Angle Plate VRS-85 achieves a tolerance level indicated by its 0.005 mm accuracy, providing dependable alignment for fixturing and measurement tasks. Is the unit suitable for use on a machine table as well as an inspection bench? Yes, the VRS-85 is designed for both machine-table fixturing and bench inspection, thanks to its compact 200 x 200 x 120 mm footprint and stable 14.3 kg mass. What material is the angle plate made from and why does it matter? The plate is made from alloy steel, chosen for dimensional stability and wear resistance, which supports long-term precision and reliable clamping performance. Are technical drawings and images available to assist integration? Technical drawing and detailed images are provided to support design and integration of the VRS-85 into existing inspection and machining workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x250x108mm Four-Jaw Square Self-Centring Machine Vice, 1620 kgf Clamping Force - Vertex
Take advantage of the combination of a self‑centring four‑jaw design, 1,620 kgf clamping force and robust build quality for dependable, repeatable workholding. Order the chuck directly via Metav Werkzeuge or consult the Metav team for specification support. VMJ-8 — 4‑jaw self‑centring square chuck by Vertex with high clamping force The VMJ-8 is a self‑centring, four‑jaw square chuck engineered for secure workholding in precision machining and heavy‑duty turning applications. Self‑centring four‑jaw design High clamping force: 1,620 kgf Accuracy 0.03 Robust construction, 21.5 kg mass Consistent precision for machining accuracy The self‑centring four‑jaw mechanism delivers uniform clamping across the jaw set, which supports consistent part concentricity and reduces rework. With a specified accuracy of 0.03, the chuck provides measurable repeatability that benefits setup reliability and process control. The design minimises radial run‑out during turning and milling operations; for operators less familiar with technical tolerances, this means fewer scrapped parts and more predictable finishing results. Emphasis on stable clamping translates directly into improved surface quality and tighter dimensional control. Heavy clamping capability for larger, demanding workpieces A clamping force of 1,620 kgf ensures secure retention of workpieces under significant cutting loads, enhancing stability during deep cuts or interrupted cuts. The unit's 21.5 kg mass contributes to damping and reduces vibration, supporting longer tool life and higher feed rates where appropriate. The square mounting and robust construction make the chuck suitable for demanding shopfloor environments where mechanical resilience and repeatability are priorities. Performance‑oriented shops benefit from this combination of force and mass when machining tougher materials or larger diameters. Efficient setup and practical integration for workshop use The chuck is designed for straightforward integration with lathes and machining centres that accept square‑mounted chucks, enabling rapid changeovers and reproducible setups. The self‑centring feature reduces alignment steps during workpiece change, saving machine time without sacrificing hold quality. Maintenance requirements are conventional: regular cleaning of the jaw tracks and periodic lubrication preserves long‑term performance. For teams transitioning from simple three‑jaw chucks, the four‑jaw self‑centring design offers a balance between versatility and precision for mixed production runs. For reliable high‑force clamping from Vertex, contact Metav Werkzeuge in Emmerich for availability and tailored advice — Metav's specialists can be reached at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VMJ-8 GTIN: 4061905087486 Manufacturer: Vertex Core specifications Dimensions: 200x250x108 mm Weight: 21.5 kg Clamping force: 1,620 kgf Accuracy: 0.03 Features Self‑centring four‑jaw square chuck Square mounting ECLASS: 21020590 FAQ What level of concentricity can be expected from this chuck? The chuck achieves a specified accuracy of 0.03, which in practice supports tight concentricity for precision turning and milling when properly set up and maintained. Is the clamping force sufficient for interrupted cuts and heavy milling? With a clamping force of 1,620 kgf, the chuck provides secure retention for demanding operations; the mass and construction also help to damp vibration during heavy cuts. Which machines is this chuck compatible with? The design suits machines that accept square‑mounted, four‑jaw chucks; compatibility should be confirmed against spindle or adaptor specifications and mounting interfaces. How does the self‑centring four‑jaw design compare to three‑jaw chucks? The self‑centring four‑jaw offers a compromise between the speed of three‑jaw systems and the versatility of independent jaws, delivering improved repeatability with simpler setup than fully independent jaw arrangements. Are replacement jaws or spare parts available for this model? Spare parts and jaw sets are available through Vertex distributors; reference the VMJ-8 article number when enquiring to ensure correct components are supplied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x350x150mm Small Parts Storage Box Set, 18 Compartments - Vertex
Take advantage of a compact, space-saving solution with clear handling advantages: the set format and precise dimensions enable consistent small-part organisation and faster retrieval in production environments. Order directly via Metav Werkzeuge or consult the Metav team for tailored advice. Small parts storage boxes VHB-2035 — Vertex set with compact footprint and lightweight handling Small parts storage boxes VHB-2035 provide a compact, modular solution for organising small components across workshops, stores and assembly stations. Compact 200 x 350 x 150 mm footprint Supplied as set of 18 small boxes Lightweight at 0.585 kg per box Save bench space with a compact, organised kit The VHB-2035 small parts storage boxes are designed to maximise bench and shelf efficiency through a compact 200 x 350 x 150 mm footprint that fits standard workbenches and shelving racks. Supplied as a set of 18, the format supports consistent layout planning on the shop floor, enabling a tidy arrangement of fasteners, fittings and small components. Clear labelling and a uniform footprint simplify replenishment routines and reduce time spent searching for items, which contributes directly to throughput improvements in repetitive manufacturing tasks. Faster sorting and handling to reduce process time At 0.585 kg per box, the lightweight construction allows rapid repositioning during assembly or pick-and-place operations without heavy lifting or awkward handling. The modular format supports grouped storage, so batches of related parts can be kept together for single-step retrieval. By combining a space-saving design with easy handling, the system promotes a smoother material flow and fewer interruptions during production runs, which translates into measurable time savings and fewer handling errors. Practical choice for workshops with reliable supply from Metav The configuration suits both trade workshops and production departments that require straightforward small-part organisation without complex installation. Metav’s approach to supply ensures availability and continuity: the offering is backed by a European distribution and quality filter in Emmerich, plus decades of experience supplying industry and craft. This practical logistics and service setup supports steady workshop operation and reduces procurement complexity for maintenance and production teams. For availability, configuration advice or delivery options for the Vertex VHB-2035 small parts storage boxes, contact Metav Werkzeuge — Metav’s Emmerich team provides reliable supply and expert guidance; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VHB-2035 GTIN: 4061905090165 Manufacturer: Vertex Facts Dimensions: 200 x 350 x 150 mm Weight: 0.585 kg Pieces per set: 18 EClass: 21100422 Special features Supplied as a set Intended for small parts organisation Images: VHB-1218-main.png, VHB-1218-detail.png FAQ What are the external dimensions of the boxes? The external dimensions are 200 x 350 x 150 mm for each unit in the VHB-2035 small parts storage boxes by Vertex. How many boxes are supplied in one set? Each delivery of the VHB-2035 is supplied as a set of 18 individual boxes. What is the weight of a single box? A single box weighs 0.585 kg, allowing easy handling and frequent repositioning on the workbench. Are these boxes suitable for workshop use and industrial environments? Yes, the format and design of the VHB-2035 make it suitable for workshop and light industrial organisation of small components, supporting orderly storage and efficient retrieval. Can these boxes be used for mixed small parts like screws, washers and electronic components? The boxes are designed for general small-part organisation and work well for screws, washers, fittings and similar components where compact, repeatable storage is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x400mm Magnetic Chuck 50mm Height, 26 kN Holding Force - Vertex
The combination of a compact 200 x 400 mm footprint, a substantial 32 kg base and a defined 50 mm height delivers stable fixturing and reliable machining results. The measured magnetic force 26 reduces re-clamping and supports consistent throughput. Order the VG-816 directly via Metav Werkzeuge or ask our consultants if needed. VG-816 Magnetic Clamping Plate – Vertex, 200 x 400 mm, 50 mm height The VG-816 is a magnetic clamping plate designed for secure workpiece fixturing in machining and inspection applications. Compact 200 x 400 mm footprint Robust 50 mm overall height High holding power: magnetic force 26 Solid 32 kg base for stability Stable support for repeatable machining results The heavy-duty construction and defined geometry provide a stable platform for workholding, reducing vibration and improving surface finish. With a 200 x 400 mm contact area and a substantial 32 kg mass, the device increases resistance to torsion and movement during machining. The specified 50 mm overall height supports consistent tool offsets and alignment on the machine table, contributing to predictable results and fewer scrapped parts. Faster set-up and measurable process gains A uniform magnetic force 26 across the surface helps to shorten preparation times and reduces the need for mechanical clamping. This consistency enhances repeatability, so successive parts maintain the same datum and orientation without time-consuming re-adjustments. For production environments where cycle time matters, the improved hold and diminished fixturing variance translate directly into higher effective throughput and lower per-part handling time. Compact form for flexible workshop integration The modest footprint and defined height make the clamping plate simple to position on many machine tables without compromising access or visibility. The substantial mass provides inherent damping while remaining compact enough to be transferred between stations where a stable magnetic base is required. The straightforward form factor supports efficient fixture planning and quicker machine changeovers, helping operations to remain responsive to varied job demands. Predictable quality through quantifiable specifications The combination of listed dimensions, weight and magnetic force offers a clear, verifiable basis for selecting the right clamping solution for a given process. The measurable characteristics make it easier to compare alternatives and ensure the chosen device meets specific stiffness and holding requirements. This transparency supports quality assurance efforts and aids process documentation for audits or continuous improvement programmes. Contact Metav Werkzeuge in Emmerich to discuss the Vertex VG-816 magnetic clamping plate and confirm suitability for individual production requirements Technical data SKU: VG-816 GTIN: 4061905086618 eClass: 21020809 Core data Dimensions: 200 x 400 mm Height: 50 mm Weight: 32 kg Magnetic force: 26 Special features Brand: Vertex Image file: vg-407-main.jpg Category: Vertex FAQ What applications suit this magnetic clamping plate best? The VG-816 magnetic clamping plate by Vertex is suitable where stable, repeatable fixturing is required for machining and inspection tasks that benefit from magnetic holding. How are parts typically secured to the plate? Workpieces are held by the plate’s magnetic field; the VG-816 provides uniform attraction across its 200 x 400 mm area to limit the need for additional mechanical clamps. What maintenance is required to retain performance? Periodic cleaning of the plate surface and inspection for wear or contamination preserves the magnetic contact; the VG-816’s robust build reduces the frequency of maintenance interventions. Can the plate be moved between machines? The 32 kg mass of the VG-816 gives good stability while still allowing relocation between stations when required by production flow. How do the stated dimensions affect setup? The defined 200 x 400 mm footprint and 50 mm height provide repeatable offsets and predictable fixturing geometry, simplifying setup and tooling alignment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x400mm Magnetic Chuck Fine Pole Distribution, 30 N/cm² Holding Force - Vertex
The combination of a very fine pole distribution, compact working surface and substantial mass ensures secure, repeatable workholding for small to medium components and reduces set-up time on precision machines. Order the VRTW-2040A magnetic clamping plate directly via Metav Werkzeuge or ask our consultants if needed. VRTW-2040A Magnetic clamping plate — 200 x 400 mm, very fine pole distribution (Vertex) A magnetic clamping plate VRTW-2040A designed for precision workholding with a very fine pole distribution, suited to small and medium workpieces in demanding machining environments. Compact 200 x 400 mm working surface Very fine pole distribution for small parts Robust 50 mm plate profile Strong magnetic force rating 30 Secure, precise holding for fine components The combination of a very fine pole distribution and a compact working area gives consistently accurate clamping of small, geometrically complex parts. The dense pole layout reduces the unsupported surface between poles, which improves contact stability and lowers the risk of workpiece movement during milling or grinding. As a result, set-up times are shortened and scrap rates fall, delivering measurable gains in process reliability and throughput. Robust construction that supports machine performance A 50 mm plate profile and substantial plate mass contribute to vibration damping and dimensional stability during cutting operations. The unit’s magnetic force 30 rating provides a dependable holding capacity for typical small and medium workpieces without resorting to mechanical clamps, enabling unobstructed tool access and simplified fixturing. The solid construction is engineered to remain stable across repeated cycles, supporting continuous production in the toolroom or small-series manufacturing. Shop-floor integration and practical handling The plate’s 200 x 400 mm dimension makes it straightforward to fit on common machine tables while still offering usable surface area for multiple small parts or fixtures. The fine pole pattern improves versatility when repositioning components, allowing faster job changes and reducing auxiliary tooling needs. Supplied under the Vertex brand, the design focuses on predictable performance and uncomplicated handling, helping workshop teams maintain accuracy without complex adjustment routines. Contact Metav Werkzeuge to discuss the VRTW-2040A magnetic clamping plate, confirm suitability for specific tasks and arrange delivery from our Emmerich quality hub Technical Data SKU: VRTW-2040A GTIN: 4061905086595 Article: Magnetic clamping plate, Vertex Facts Dimensions: 200 x 400 mm Height: 50 mm Weight: 31 kg Magnetic force: 30 Type: A eClass: 21020809 Special features Very fine pole distribution Compact work surface for small parts Robust plate profile Vertex brand FAQ What are the plate dimensions? The plate measures 200 x 400 mm as stated for the VRTW-2040A magnetic clamping plate. How thick is the plate and how does that affect stability? The VRTW-2040A has a 50 mm plate profile; the greater thickness contributes to vibration damping and improved stability during machining. What is the holding specification of the unit? The unit is specified with a magnetic force value of 30, giving reliable holding capacity for small to medium workpieces. Is the pole layout suitable for very small components? Yes — the very fine pole distribution of this workholding plate is designed to provide secure contact for smaller, intricate parts. Who manufactures this magnetic clamping plate? The magnetic clamping plate is manufactured by Vertex and sold under the SKU VRTW-2040A. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x450mm Magnetic Chuck 50mm Height 26N Magnetic Force - Vertex
Built for secure fixation and reliable machining, the VG-818 magnetic clamping plate combines a compact 200 x 450 mm working surface, a low 50 mm profile and a mass of 36.3 kg to deliver stable holding power; order the VG-818 directly via Metav Werkzeuge or ask our consultants if needed. VG-818 Magnetic clamping plate — 200 x 450 mm, 50 mm height (Vertex) The VG-818 magnetic clamping plate is a compact magnetic chuck designed to provide firm workpiece fixation for machining and inspection tasks in limited spaces. Compact 200 x 450 mm working surface Low-profile 50 mm design for tool clearance Magnetic force rating 26 for secure clamping 36.3 kg mass for improved damping and stability Stable clamping that improves machining consistency The VG-818 delivers a predictable holding solution thanks to its defined magnetic force and substantial mass. The specified magnetic rating of 26 gives a clear indicator of the plate’s holding capability, while the 36.3 kg mass contributes to vibration damping and a steadier machining environment. Together these attributes reduce chatter and support consistent surface finishes, which is particularly important for repeatable production runs and precision rework. By converting magnetic holding data into practical expectations, operators can assess fixture suitability against machining parameters and toolpath strategies. Low profile and compact footprint for flexible setup A low-profile height of 50 mm and a working surface of 200 x 450 mm mean the clamping plate fits into constrained setups without compromising accessibility. The slim design permits closer tool approaches and improved clearance during multi-axis or near-fixture operations, while the compact footprint preserves valuable bench or machine table space. For quality control stations where access and visual inspection matter, the shallow profile aids in measuring and aligning workpieces, making the unit suitable for both small-batch production and laboratory inspection tasks. Practical integration and dependable supply chain The magnetic clamping plate is straightforward to incorporate into existing fixtures and fixturing strategies, providing a consistent reference surface for machining and measurement. Its robust construction and defined specifications support process planning and risk reduction in production. Supply and after-sales reliability stem from Metav Werkzeuge’s role as a European-quality filter: central stock and experienced distribution ensure dependable availability and clear product information for purchasing decisions. The combination of technical clarity and supply integrity supports long-term planning for workshops and industrial users alike. For precise clamping solutions from Vertex, contact Metav Werkzeuge for ordering and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VG-818 GTIN: 4061905085314 eClass: 21020809 Facts Dimensions: 200 x 450 mm Height: 50 mm Weight: 36.3 kg Magnetic force: 26 Special features Magnetic clamping plate Compact format for restricted machine tables Low-profile design for improved tool clearance FAQ What are the exact dimensions and height of the clamping plate? The clamping plate measures 200 x 450 mm with a height of 50 mm, providing a compact working surface suited to small to medium fixtures. What does the magnetic force rating of 26 mean in practice? The rating of 26 indicates the plate’s holding capacity relative to other magnetic chucks; combined with the plate’s mass it yields secure fixation for typical ferrous workpieces used in machining and inspection. Is the VG-818 suitable for precision inspection tasks? Yes, the VG-818 magnetic clamping plate provides a stable reference surface and damping from its 36.3 kg mass, supporting repeatable measurements and visual inspections. How does the low-profile design benefit machining operations? The 50 mm profile allows closer tool approaches and better access around the workpiece, reducing interference and enabling setups where clearance is limited. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200x450mm Magnetic Chuck Fine Pole Distribution, 30 N/cm² Holding Force - Vertex
Take advantage of the combination of robust clamping power, a very fine pole distribution and a compact 200 x 450 mm footprint for consistent, high-precision workholding; order the magnetic chuck directly via Metav Werkzeuge or consult our advisors for technical guidance. VRTW-2045A Magnetic clamping plate (Type A) by Vertex — very fine pole distribution The VRTW-2045A is a magnetic clamping plate engineered for precision holding in metalworking and general workshop applications, offering a compact format and focused clamping performance. Very fine pole distribution for small workpieces Compact footprint 200 x 450 mm 50 mm plate height for stable support Strong magnetic force rating of 30 Reliable holding for precision machining A magnetic clamping solution built around a very fine pole distribution ensures reliable contact across small or intricate components, improving positional stability during milling, grinding and light machining operations. The combination of a compact 200 x 450 mm working area and 50 mm overall height delivers a stable platform without excessive bulk, while the substantial 36 kg mass contributes to vibration damping and consistent contact. These characteristics translate into better repeatability and reduced rework, making the chuck a practical choice where process reliability and part quality are priorities. Faster set-ups and clearer process benefits Fine pole spacing reduces the need for custom mechanical fixturing, supporting quicker workpiece clamping and shorter set-up times. The chuck’s magnetic system, rated with a magnetic force of 30, is engineered to maintain secure holding for steady machining forces, which supports predictable cycle times and improved shop-floor efficiency. For operators and process planners, this equates to fewer adjustments between runs and a leaner workflow that favours throughput without compromising accuracy or surface finish. Designed for workshop integration and straightforward handling The plate’s moderate dimensions and defined height align with common machine tables and fixture layouts, allowing quick integration into existing equipment. The weight and construction are optimised to provide solidity while remaining manoeuvrable for handling on a bench or machine table. Maintenance routines are simple and largely limited to surface cleaning and inspection; the design avoids complex servicing needs and supports continuous operation in a production environment where uptime matters. Precision where it counts — engineered by a recognised brand Manufactured under the Vertex designation, the component reflects a focus on measured performance and consistent production results. The engineering emphasis is on stable clamping, repeatable positioning and a fine pole architecture that supports small-part workholding. For teams seeking to elevate machining consistency with a compact magnetic solution, this plate offers a pragmatic balance of performance and workplace convenience. Contact Metav Werkzeuge for tailored advice on integrating the VRTW-2045A into existing workflows or to request detailed technical specifications and delivery options — our consultants are ready to assist. Technical Data Article number: VRTW-2045A GTIN: 4061905085895 Type: A Core data Dimensions: 200x450 mm Height: 50 mm Weight: 36 kg Magnetic force: 30 ECLASS: 21020809 Special features Very fine pole distribution Vertex product designation VRTW-2045A Compact clamping plate format FAQ What is the recommended application for this magnetic clamping plate? The magnetic clamping plate VRTW-2045A by Vertex is designed for precision holding in machining and general workshop tasks where a fine pole distribution supports small or detailed components. How large is the working area of the clamping plate? The plate offers a working footprint of 200 x 450 mm, as specified for the VRTW-2045A magnetic chuck. What does the magnet force value of 30 indicate? The figure indicates the rated magnetic clamping strength for the unit; for precise operational parameters and load examples, Metav Werkzeuge can provide application guidance for the VRTW-2045A. Is the plate easy to install on standard machine tables? The plate’s 200 x 450 mm format and 50 mm height are intended for straightforward integration with common machine tables and fixture setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com