Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
20mm Flat Magnetic Gripper H6 Without Threaded Bush Holding Force 30N, Temp up to 200°C - TECWERK
Take advantage of a compact, high-temperature tolerant clamp with hard ferrite construction and a holding force of 30 N for reliable fixation of light components; order the magnetic flat gripper directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. Magnetic Flat Gripper Ø20 x H6 mm — TECWERK The Magnetic Flat Gripper Ø20 x H6 mm is a compact clamping magnet designed for secure, space-saving fixation of small parts in assembly, jigs and light-duty fixtures. Compact Ø20 x H6 design Hard ferrite magnet material Holding force 30 N for small parts Rated to 200 °C peak temperature Reliable holding for precise small-part clamping With a rated holding force 30 N, this compact flat magnet provides consistent adhesion for light components and small tools where repeated, secure contact is required. The low-profile Ø20 x H6 mm format minimises obstruction in tight assemblies and enables closer tolerances in fixturing. In practical terms, 30 N corresponds to a predictable retention suitable for aligning, holding and positioning operations; the numerical value supports rational selection when calculating safety margins and handling requirements. Durable construction with thermal resilience Manufactured from hard ferrite, the gripper retains stable magnetic properties and resists demagnetisation under normal workshop stresses. The component is specified with a recommended operating temperature up to 100 °C and a maximum of 200 °C, which indicates suitability for processes that involve elevated temperatures or intermittent heating. Hard ferrite also offers corrosion resistance and long-term magnetic stability, translating into lower replacement frequency and predictable performance over the product lifetime. Space-saving design for straightforward integration The version supplied without a threaded bush is optimised for flush mounting or incorporation into custom fixtures where a low profile is essential. Its simple geometry supports rapid layout and repeatable placement in modular tooling or vacuum tables, reducing overall system complexity. The ceramic magnetic core keeps maintenance needs minimal, while the compact footprint supports dense part arrays and micro-assembly tasks without significant redesign of existing tooling. For technical integration advice or to discuss supply options from Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, specialist support. Technical data Article number: 4000832233NW Product type: Magnetic flat gripper Manufacturer: TECWERK Material: Hard ferrite Version: without threaded bush Dimensions & performance Diameter: 20 mm Height: 6 mm Holding force: 30 N Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C Packaging unit: 10 Features & applications Compact flat clamping magnet Suitable for light-part fixation and positioning Ceramic hard ferrite magnet material Designed for direct flat mounting (no threaded bush) Low-profile solution for space-constrained fixtures FAQ What is the maximum holding capacity of this gripper? The gripper provides a holding force of 30 N as specified for the Magnetic Flat Gripper Ø20 x H6 mm (TECWERK, SKU 4000832233NW). Can this magnet be used at elevated temperatures? Yes, the unit is rated with a recommended operating temperature up to 100 °C and a maximum temperature tolerance of 200 °C. Is the gripper supplied with a threaded mounting option? This version is supplied without a threaded bush; it is intended for flat or bespoke mounting solutions. What material is the magnetic core made from? The core material is hard ferrite, selected for stable magnetic properties and resistance to demagnetisation. For which tasks is this flat magnet most suitable? The device is ideal for holding, aligning and light-fixture duties where a compact, low-profile magnetic clamp is required Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Flat Magnetic Gripper M3 Threaded Bush Holding Force 30N, Up to 200°C - TECWERK
Take advantage of compact, reliable magnetic holding with simple threaded mounting and temperature resilience; ideal for small fixtures and assembly jigs. Order TECWERK magnetic flat holders directly via Metav Werkzeuge or request technical advice from our consultants. TECWERK Magnetic flat holder D20 × H13 mm, M3 threaded bushing The magnetic flat holder D20×H13 mm is a compact magnetic fixing element designed for secure, space-saving attachment in light assembly and fixturing applications Compact magnetic holder, Ø20 mm, H13 mm Solid hard-ferrite magnet material Integrated M3 threaded bushing Holding force 30 N, high-temperature tolerant Reliable holding for light assembly and fixture tasks The magnetic flat holder delivers a consistent 30 N holding force, making it suitable for small part retention, positioning jigs and temporary fixtures where controlled magnetic adhesion is required. The specified holding force refers to the maximum axial pull under ideal contact conditions; in practice, surface finish and contact area influence the effective grip. The hard-ferrite composition ensures stable magnetic properties across a wide temperature range, providing dependable performance for repetitive assembly cycles without active maintenance. Space-saving mounting with threaded bushing for secure fixing With an outer diameter of Ø20 × H13 mm and an integrated M3 threaded bushing, this compact component enables straightforward mechanical fastening into fixtures, housings or tooling plates. The threaded insert permits simple screw attachment, reducing installation time and eliminating the need for additional adhesive bonding. The slim profile is particularly advantageous where clearance is limited, allowing magnetic fixing to be combined with precise mechanical alignment in tightly packed assemblies. Material selection and thermal behaviour for workshop environments Made from hard ferrite, the magnetic flat holder offers good magnetic stability and corrosion resistance typical of ceramic magnets, while remaining cost-effective for bulk use in workshops. The supplier guidance notes a recommended operating temperature up to 100 °C and a maximum of 200 °C, so the component is suitable for many industrial processes that involve raised temperatures, but should be kept away from direct heat sources exceeding the maximum rating. The brittle nature of ferrite ceramics should be considered during handling and assembly to avoid impacts that could cause chipping. For dependable small-part holding in workshop and light industrial applications, choose the TECWERK magnetic flat holder from Metav Werkzeuge — technical advice and local supply are available via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832243NW Product type: Magnetic flat holder Material: Hard ferrite Diameter: 20 mm Height: 13 mm Thread: M3 Execution: with threaded bushing Holding force: 30 N Recommended operating temperature: up to 100 °C Maximum operating temperature: 200 °C Packaging unit: 10 Facts Ø20 mm H13 mm M3 thread 30 N holding force Recommended up to 100 °C Maximum 200 °C Special features Integrated threaded bushing Compact flat design Hard-ferrite magnet material SKU 4000832243NW FAQ What holding force can be expected from this magnetic flat holder? The TECWERK magnetic flat holder provides a maximum holding force of 30 N; actual grip depends on contact surface and alignment. Can the holder be bolted directly into fixtures? Yes, the integrated M3 threaded bushing allows direct screw mounting into fixtures or tooling plates for secure attachment. Is the material suitable for elevated temperatures? The component, manufactured from hard ferrite, is recommended for use up to 100 °C and rated to a maximum of 200 °C under specific conditions. Are these holders suitable for heavy-duty magnetic clamping? This product is intended for light assembly and positioning tasks; for heavy-duty clamping, devices with higher rated holding forces should be selected. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Horizontal Clamp Automatic Clamp Height Adjustment, 1,100 N - BESSEY
A compact solution combining automatic clamping height adjustment with a 1,100 N clamping force ensures fast, repeatable horizontal fixation and reduced setup time; order the BESSEY STC-HH20 directly via Metav Werkzeuge or consult the technical team for application support. BESSEY STC-HH20 Horizontal Clamp (Size 20) — Automatic Height Adjustment, 1,100 N The BESSEY STC-HH20 Horizontal Clamp offers robust horizontal clamping on a dedicated base plate, optimised for repeatability and short cycle times in workshop and production environments Automatic clamping height adjustment Max. clamping force 1,100 N Size 20 with 167 mm jaw length Adjustable spindle range 26–31.75 mm Consistent clamping that cuts cycle time The combination of automatic clamping height adjustment and a rated 1,100 N clamping force delivers dependable holding power with minimal operator intervention. Automatic height compensation reduces the need for manual readjustment when part thickness varies, so set-up errors and rework are lowered and fixture throughput is improved. Efficiency gains arise from fewer handling steps and from the clamp's ability to maintain consistent pressure across repetitive cycles, which is especially beneficial in medium-volume production and jigs where repeatability matters. Compact dimensions for flexible fixture design Designed as a horizontal base-plate clamp, the unit features a jaw length of 167 mm (L1) and an adjustable spindle range of 26–31.75 mm (M), enabling secure positioning across a variety of workpiece profiles. Additional measured points — A 10 mm, B 45 mm, C 13 mm, E 20 mm, H1 25 mm, I 10 mm, N 42 mm, P 45 mm — support precise planning when integrating the clamp into existing tooling. The modest footprint and clearly defined dimensions make the device straightforward to implement on modular tooling boards and bespoke fixtures, allowing engineers to predict spatial requirements and ensure reliable clearance for adjacent operations. Built for workshop reliability and straightforward integration Manufactured by BESSEY, this horizontal clamp is intended for frequent use in both trade workshops and light industrial settings where dependable clamping and rapid turnaround are required. The mechanism is engineered for low maintenance and long service life; routine checks and lubrication prolong operational performance. Its horizontal base-plate format facilitates mounting in standard fixture layouts and supports modular assembly processes. As a component in an optimised workholding strategy, the clamp contributes to reduced cycle variation and improved downstream quality outcomes. Contact Metav Werkzeuge to discuss deployment of the BESSEY STC-HH20 for specific fixtures, request a quotation or obtain detailed technical drawings — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000831133NW Type: STC-HH Product: Horizontal clamp Brand: BESSEY Execution: automatic clamping height adjustment Packaging unit: 1 Facts Max. clamping force: 1,100 N L1 (jaw length): 167 mm M (adjustable spindle range): 26–31.75 mm A: 10 mm B: 45 mm C: 13 mm E: 20 mm H1: 25 mm I: 10 mm N: 42 mm P: 45 mm Special features Automatic clamping height adjustment Horizontal base plate version Size: 20 FAQ What is the maximum clamping force of the clamp? The clamp provides a maximum clamping force of 1,100 N, as specified for the BESSEY STC-HH20. Which dimensions are relevant for fixture design? Key dimensions for fixture planning include the jaw length L1 = 167 mm and the adjustable spindle range M = 26–31.75 mm; further dimensional data (A, B, C, E, H1, I, N, P) are available in the technical data. Is the height adjustment automatic or manual? The STC-HH20 features automatic clamping height adjustment, enabling compensation for varying part heights without manual re-setting. Can the clamp be mounted on a modular fixture plate? Yes, the horizontal base-plate design of the STC-HH20 is compatible with standard modular fixture arrangements and can be integrated into existing workholding systems. Which brand manufactures this horizontal clamp and what is the article number? This horizontal clamp is manufactured by BESSEY and is listed under article number 4000831133NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Horizontal Clamp Variable Open Holding Arm Angle Base M6 x 40 Pressure Screw, Max 2000 N - AMF
Reliable clamping with a variable open holding arm and angled base enables secure, repeatable workholding and rapid set-up; combined with automatic height compensation and a 2,000 N maximum clamping force this results in stable machining and less rework — order the horizontal clamp directly via Metav Werkzeuge or ask our consultants if needed. AMF Horizontal Clamp No. 6871, Size 20 — Angle Base, Variable Open Holding Arm The AMF Horizontal Clamp No. 6871, Size 20, Angle Base is a compact horizontal clamp for secure workholding in machining and assembly applications, featuring a variable open holding arm and an angled base for flexible mounting. Variable open holding arm for versatile use Angle base for flexible mounting options Automatic height compensation 20–35 mm Max. clamping force 2,000 N Secure and consistent workholding for production use This horizontal clamping solution offers repeatable clamping thanks to its robust kinematics and a specified maximum clamping force of 2,000 N, which ensures components remain stationary during machining or assembly. The design includes a variable open holding arm, enabling quick positioning of irregular or bulky parts without complex adjustment. Built-in adjustability reduces set-up time and helps maintain consistent cycle times on the shop floor. Rapid height adjustment reduces set-up complexity Featuring automatic height compensation (S = 20 mm) and a maximum compensating range of 35 mm, the device adapts to slight differences in workpiece height without manual shimming. This automatic compensation minimises the need for re-clamping and supports continuous operation across batches with variable stock thickness. The integrated pressure screw (M6 x 40) provides controlled actuation and reliable pressure application for repeatable results. Compact angle base for flexible fixture construction The angled base provides multiple mounting orientations, making it straightforward to integrate into custom fixtures or modular tooling plates. With a total length (L1) of 173 mm and defined interface dimensions such as B = 56 mm and E = 22 mm, the clamp fits tight assemblies while offering sufficient reach and clearance. The open holding arm configuration supports quick loading and unloading, improving throughput in assembly and inspection stations. Practical adjustment range and workshop durability Key adjustment values such as the clamping jaw range (C = 20–26 mm) and work height limits (HW min. -3 mm / HW max. 24 mm) make it simple to determine suitability for specific parts. The unit’s compact form and clearly defined interface dimensions facilitate predictable integration into existing tooling. With a packaging unit of 1, the product is delivered ready for installation in single-piece applications or as a spare part for maintenance. Contact Metav Werkzeuge today to discuss integration options for this AMF horizontal clamp and secure reliable, precision workholding for your production line Technical Data Article number: 4123572011NW Type: 6871 Product label: Waagrechtspanner Nr.6871 Gr.20 Winkelfuß AMF Facts Clamping force, max: 2,000 N Automatic height compensation S: 20 mm Max. height compensation: 35 mm C (clamping range): 20–26 mm B: 56 mm L1: 173 mm H: 68 mm H1: 94 mm H2: 113 mm D / D1: 5.6 mm A: 6 mm E: 22 mm F: 24 mm I: 10 mm K: 7.1 mm M: 25.4 mm N: 45 mm P: 38 mm HW min.: -3 mm HW max.: 24 mm Pressure screw: M6 x 40 Packaging unit: 1 Special features Variable execution; open holding arm; angled base Automatic height compensation Compact dimensions for tight fixtures Designed for machining and assembly workholding FAQ What is the maximum clamping force of this clamp? The clamp delivers a maximum clamping force of 2,000 N, which ensures secure fixation for typical machining and assembly tasks with the AMF Horizontal Clamp No. 6871, Size 20. How much height compensation is available? Automatic height compensation is 20 mm, with a maximum compensating range of 35 mm, allowing the clamp to accommodate small variations in workpiece height without manual shimming. Which clamping range does the device support? The clamping jaw range is 20–26 mm (C), suitable for many small to medium-sized components used in fixtures. Is the angled base suitable for modular fixture plates? Yes, the angle base permits flexible mounting orientations and straightforward integration into modular tooling plates or custom fixtures. What mounting and interface dimensions are specified for integration? Key interface dimensions include L1 = 173 mm, B = 56 mm, E = 22 mm, and hole diameters D / D1 = 5.6 mm, enabling predictable installation in existing setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Pneumatic Clamp With 95° Horizontal Foot, 750N Push / 1000N Hold, Zinc Coated Heavy Arm - Kukamet
Take advantage of the combination of robust galvanised construction, reliable 1,000 N holding force and compact horizontal-foot mounting for consistent clamping in production environments; order the Pneumatic clamp 611 directly via Metav Werkzeuge or consult our specialists for tailored advice. Pneumatic clamp 611 by Kukamet — compact pneumatic lever clamp with galvanised massive arm Pneumatic clamp 611 is a lever-style pneumatic clamp designed for repetitive fixture and workholding tasks in workshops and light industrial production. Robust massive holding arm Horizontal-foot mounting for secure fixation Galvanised for increased corrosion resistance Up to 1,000 N holding force Faster, repeatable clamping through pneumatic actuation The pneumatic actuation principle delivers consistent, high-speed clamping cycles that reduce setup time and improve throughput. A 20 mm piston with a maximum actuation force of 750 N provides the mechanical drive needed for rapid engagement while preserving repeatability over thousands of cycles. This pneumatic operation is particularly effective where manual lever clamping would introduce variability; the result is more reliable process control and fewer reworks. Durable design for daily industrial use Constructed with a massive holding arm and a galvanised finish, the clamp resists wear and corrosion in workshop conditions. The 44 mm arm length and a clamping angle of 95° ensure good reach and clearance for a wide range of jigs and fixtures, while the specified 1,000 N holding capacity secures parts during machining, assembly or inspection. The combination of solid mechanics and protective coating translates into longer service life and predictable performance. Simple installation and versatile applications The clamp is supplied with a horizontal foot for stable mounting to tables, plates or bespoke fixtures, allowing easy integration into existing setups. Its compact footprint and lever geometry make it suitable for woodworkers, metal workshops and fixture builders who require rapid locking and unlocking without complex adjustments. Routine maintenance is limited to periodic inspection of moving parts and air supply quality, ensuring low lifetime operating costs and minimal downtime. Request a technical consultation from Metav Werkzeuge for the Kukamet 611 pneumatic clamp — precise specifications, compatibility checks and ordering support are available directly from Metav Werkzeuge Technical data Article number: 611-1-Q20-D-C1 Brand: Kukamet Type: Pneumatic clamp 611 ECLASS: 21021004 ETIM: EC011973 Facts Arm length: 44 mm Clamping angle: 95° Maximum actuation force: 750 N Maximum holding force: 1,000 N Piston diameter: 20 mm Special features Massiver Haltearm (massive holding arm) Horizontal-foot mounting Galvanised material Category: Spanner FAQ What materials is the clamp suitable for? The Kukamet 611 pneumatic clamp is designed as a general-purpose workholding device; suitability depends on fixture design and process forces rather than the clamp alone. How much clamping force does the unit provide? The clamp provides a maximum holding force of 1,000 N and a maximum actuation force of 750 N, values intended to guide fixture and process design. How is the clamp mounted? The unit is fitted for horizontal-foot mounting, enabling secure attachment to plates or machine tables without additional adapters. What maintenance is required? Routine checks of the air supply quality, seals and pivot points are recommended; the galvanised finish reduces corrosion-related maintenance. Can the clamp be used in automated fixtures? Yes, the pneumatic actuation and compact lever geometry make the clamp suitable for semi-automated and automated fixtures where pneumatic control is available. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Pneumatic Push Rod Clamp Zinc Cast Body 7.5kN Thrust, 18.45kN Holding Force - Kukamet
Combine robust zinc-plated construction with a compact piston Ø 20 mm and a maximum thrust of 7,500 N for secure, repeatable clamping in production fixtures. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Pneumatic Push-Rod Clamp 672 — 7,500 N thrust, zinc-plated cast body Kukamet Pneumatic Push-Rod Clamp 672 is a pneumatic actuator for industrial fixtures, designed for rapid actuation and high holding capacity in manufacturing and assembly jigs Zinc-plated cast body for durable service life 7,500 N maximum thrust for secure clamping 18,450 N holding force for load retention Piston diameter 20 mm for compact installation Industrial construction for long service life The clamp combines a zinc-plated finish with a cast body to resist corrosion and mechanical wear in workshop and production environments. The solid housing reduces deformation under load, which contributes to consistent clamping behaviour over long production runs. Thanks to the robust design and a mass of 5.26 kg, the unit provides a stable base for repetitive cycles while maintaining positional accuracy in fixtures and tooling plates. Precise force control and secure retention With a maximum thrust of 7,500 N and a holding force rated at 18,450 N, the device ensures reliable part retention during machining, welding or assembly. The difference between actuation force and holding force is explained by the mechanical design of the push-rod and contact geometry; this results in secure clamping even under vibration or dynamic loads. The compact piston Ø 20 mm supports fast stroke response while keeping the actuator footprint minimal for space-constrained jigs. Easy integration and practical maintenance Configured for horizontal-foot mounting, the actuator fits typical fixture bases and can be fastened quickly to existing plates. The horizontal foot arrangement simplifies alignment and replacement in modular tooling. Routine upkeep is straightforward: the zinc plating reduces the need for frequent surface protection, and the cast construction minimises deformation-related service. Metav’s product documentation and technical advisors can assist with selection of mounting hardware and pneumatic supply parameters for efficient commissioning. Order the Kukamet Pneumatic Push-Rod Clamp 672 via Metav Werkzeuge for dependable fixture clamping, or request tailored application advice from our consultants. Technical Data Article number: 672-5-Q20 GTIN: 8680731505313 Manufacturer: Kukamet SKU: 672-5-Q20 Core measurements Maximum thrust: 7,500 N Holding force: 18,450 N Piston diameter: 20 mm Weight: 5.26 kg eClass: 21041716 ETIM: EC011973 Features and mounting Zinc-plated with cast body Horizontal foot mounting Category: Spanner Files: product image and catalogue PDF available FAQ What is the primary use of this pneumatic clamp? The Kukamet pneumatic push-rod clamp 672 is designed for securing components in industrial fixtures, jigs and production lines where reliable, repeatable clamping is required. How do the thrust and holding forces relate in practice? The specified 7,500 N thrust is the actuation force; the higher holding force of 18,450 N reflects the mechanical retention capability once clamped, ensuring parts remain secure under dynamic conditions. Can the clamp be mounted on standard tooling plates? Yes. The unit is supplied for horizontal-foot mounting, making it compatible with common tooling and fixture plates used in manufacturing. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Push Rod Clamp Horizontal Foot 7.5kN Push 18.45kN Hold Zinc Plated Cast Body - Kukamet
Combine robust zinc-plated construction with a compact footprint and 7,500 N clamping force for dependable fixture performance; the high holding force (18,450 N) minimises movement under load. Order the Push-rod clamp 531 directly via Metav Werkzeuge or ask our consultants if needed. Push-rod clamp 531 — horizontal-foot mount, 7,500 N clamping force (Kukamet) The Push-rod clamp 531 is a compact horizontal-foot clamp engineered for secure workholding in jigs, fixtures and general machining applications. Zinc-plated cast body for robust durability Max clamping force 7,500 N for secure fixation Holding force 18,450 N for static load resistance Horizontal-foot mounting for assembly flexibility Secure fixation that reduces rework and downtime A small fixture component can determine process reliability. The device delivers a 7,500 N clamping force through a 20 mm piston diameter, converting operator input into consistent clamp pressure; this means fewer parts shifting during machining and a reduced need for rework. The high holding force of 18,450 N refers to the static resistance against part displacement once clamped, providing measurable assurance for repeatable setups. Such quantifiable performance supports planning and risk reduction in production workflows. Flexible installation for varied fixture layouts The horizontal-foot configuration enables mounting on flat surfaces or frame elements where a vertical base would be impractical. The clamp’s pressure spindle M12x80 allows fine adjustment of contact position and preload, while the modest weight (1.835 kg) keeps the component manageable during assembly and reduces load on subframes. These attributes translate into faster fixture changes and more compact toolstations, supporting lean setup routines and optimised use of workbench real estate. Robust construction tailored to industrial environments Manufactured with a zinc-plated finish over a cast body, the clamp offers corrosion resistance and impact tolerance suitable for workshop conditions. The combination of materials and surface treatment provides longevity with minimal maintenance, so the fixture element remains reliable over repeated cycles. The sturdy build encourages predictable performance in demanding tasks such as milling, drilling and general clamping operations. Practical benefits for everyday workshop use Compact dimensions and a horizontal mounting style enable close-packed fixture designs and permit unobstructed tool access. The clamp’s mechanical simplicity ensures easy inspection and straightforward replacement of wear parts if ever necessary, lowering lifecycle costs. Clear numeric specifications aid integration into quality documentation and allow engineers to compare alternatives objectively, making the component a pragmatic choice for small-batch production and jigs alike. Contact Metav Werkzeuge today to discuss how Kukamet’s 531 push-rod clamp can streamline fixture setups — Metav Werkzeuge is available at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 531-5-Q20 GTIN: 8680731502848 Manufacturer: Kukamet Material: Zinc-plated with cast body Mounting: horizontal foot Facts Max clamping force: 7,500 N Holding force: 18,450 N Piston diameter: 20 mm Weight: 1.835 kg Pressure spindle: M12x80 Special features Zinc-plated finish Cast body construction Horizontal-foot mounting Pressure spindle M12x80 Category: push-rod clamp (fixture component) FAQ What materials is the clamp suitable for in fixture applications? The clamp is designed as a general fixture component and its zinc-plated cast body provides robust performance in typical machining environments; material-specific limits depend on the full fixture design rather than the clamp alone. How is adjustment achieved on the 531 clamp? Adjustment is by the pressure spindle M12x80, permitting precise positioning of the clamping contact and controlled preload for consistent clamp pressure. What is the difference between clamping force and holding force for this device? Clamping force (7,500 N) is the applied force during activation; holding force (18,450 N) denotes the static resistance against displacement once the part is secured by the clamp. Is the clamp suitable for tight fixture arrangements? Yes, the horizontal-foot mounting and compact mass make the clamp appropriate for close-packed fixtures and applications requiring unobstructed tool access. Which SKU should be ordered for this model? Order the item using SKU 531-5-Q20; this identifies the Kukamet push-rod clamp with the specifications listed above. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Push Rod Clamp With M12x80 Pressure Spindle, 7.5kN Thrust / 15kN Holding Force, Horizontal Foot - Kukamet
The galvanised construction, high clamping capacity and compact horizontal-foot mount provide reliable, repeatable fixture performance; order the Kukamet 521 push-rod clamp directly via Metav Werkzeuge or request application advice from their specialists. Kukamet 521 Push-rod Clamp — galvanised design with M12x80 pressure spindle The Kukamet 521 is a robust push-rod clamp designed for fixture and jig use in production and workshop environments, offering secure holding with a horizontal-foot mounting for easy installation. Galvanised finish for corrosion resistance Horizontal foot for secure mounting M12x80 pressure spindle integrated High clamping force: 7,500 N Secure clamping for repeatable production The clamp delivers a maximum clamping force of 7,500 N and a holding force of 15,000 N, providing the necessary pressure for reliable workpiece retention during machining and assembly. These figures indicate how much force the device can apply and resist respectively, which makes it suitable for medium-duty fixtures where consistent repeatability is required. The internal piston Ø 20 mm contributes to stable actuation and even force distribution, reducing micro-movements that can affect tolerances. Durable materials minimise downtime and maintenance Constructed with a galvanised finish, the unit resists surface corrosion in workshop atmospheres and light humid conditions, extending service intervals. The integrated M12x80 pressure spindle is replaceable and enables simple fine adjustment of clamping travel and contact pressure; this design reduces maintenance time and keeps fixtures in production longer. The combination of robust material choice and straightforward serviceability supports continuous operations without frequent part changes. Compact mount for flexible fixture layouts The horizontal-foot mounting allows the clamp to be mounted on flat bases or tooling plates where vertical clearance is limited, making it easier to design compact jigs. At approximately 1.425 kg, the device is light enough for modular tooling yet substantial enough to deliver stable clamping. The lever-style mechanism derived from classic lever clamp design ensures quick actuation and clear open/closed states, helping operators to work efficiently and with fewer handling steps. Practical advantages for workshop integration The clamp's geometry and connection options make it compatible with common fixture concepts: bolting via the horizontal foot and fine-tuning with the M12 spindle mean it can be integrated into existing tooling without bespoke adaptors. The galvanised surface and mechanical simplicity lower lifetime operating costs through reduced corrosion and fewer wear-sensitive parts. When incorporated into a standardised tooling set, the component supports faster set-up times and improved process reliability. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 521 into existing jigs and to obtain detailed application guidance from the Emmerich-based team Technical data Article number: 521-5-Q20 GTIN: 8680731502794 eCl@ss: 21041716 Designation: Push-rod clamp 521 Manufacturer: Kukamet Numeric data Maximum clamping force: 7,500 N Maximum holding force: 15,000 N Piston diameter: 20 mm Pressure spindle: M12x80 Weight: 1.425 kg ETIM: EC011973 Materials / Special features Finish: galvanised Fastening: horizontal foot Clamp type: push-rod / lever-style clamp UID: 521-5-Q20 Asset references: product image and catalogue PDF available FAQ What clamping and holding forces does this clamp offer? The Kukamet 521 push-rod clamp provides a maximum clamping force of 7,500 N and a holding force of 15,000 N, values suitable for medium-duty fixtures and repeatable production tasks. Can the clamp be mounted on flat tooling plates? Yes, the horizontal-foot fastening of the Kukamet 521 is designed for secure mounting on flat bases and tooling plates, enabling compact fixture layouts. Is the pressure spindle adjustable or replaceable? The unit features an M12x80 pressure spindle for fine adjustment of contact pressure and travel; replacement is straightforward if wear requires it. Which environments is the finish suitable for? The galvanised finish on this clamp offers resistance against surface corrosion in workshop environments and light humidity, supporting longer service life without special coatings. How heavy is the clamp and does that affect modular tooling? Weighing about 1.425 kg, the clamp balances portability with solidity, making it suitable for modular tooling where components must be both robust and easy to handle. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20mm Pushrod Clamp Size 1 Small Angle Foot M4x20 Actuating Screw 1000N - AMF
Take advantage of the compact design and 1,000 N holding force together with a 20 mm stroke for reliable, repeatable clamping in confined fixtures; order the AMF push-rod clamp directly via Metav Werkzeuge or ask our consultants for application support. Push-rod clamp No. 6841, size 1, small angled foot (AMF) — compact clamping with 1,000 N holding force The Push-rod clamp No. 6841, size 1, small angled foot (AMF) is a compact clamping element for fixture and workholding tasks where space is restricted and reliable repeatability is required Holding force 1,000 N 20 mm stroke Small angled foot design M12x1.5 mounting thread Secure clamping in tight spaces for higher throughput The compact construction delivers a holding force of 1,000 N and a 20 mm stroke, making this clamp suitable for light to medium fixture tasks where secure retention is essential. The small angled foot reduces the required footprint on the workpiece and fixture plate, enabling effective clamping close to edges or in stacked tooling plates. By converting linear actuation into consistent lateral pressure, this unit supports faster part changeovers and reduced secondary handling, which contributes directly to improved cycle efficiency and less downtime. Simple mounting and predictable repeatability for production use Equipped with a M12x1.5 mounting thread and an M4 x 20 pressure screw, the design facilitates straightforward integration into existing fixtures. Adjustable travel and clear mechanical limits ensure repeatable positioning, while the specified M min./M max. dimensions allow precise alignment during setup. The straightforward mechanical principle requires no electronics or complex maintenance, so installation and routine checks remain fast and cost-effective. For workshop planners, the clamp’s compactness and standardised interfaces simplify stocking and reduce fixture complexity. Robust, low-complexity design supporting workshop reliability A pragmatic, low-complexity construction provides the benefit of consistent performance without elaborate servicing routines. The angled foot geometry offers stable contact and helps to distribute clamping loads evenly, reducing localised wear on the part and clamp. Where repeatability and dependability are priorities, this clamp offers a pragmatic balance between force and form factor. Combined with Metav’s supply chain reliability, the component is a practical choice for assembly jigs, machining fixtures and inspection setups that demand dependable clamping with minimal fuss. Contact Metav Werkzeuge for detailed mounting guidance or to request the AMF push-rod clamp No. 6841 for compact, repeatable clamping — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com; local stock and rapid dispatch from Emmerich ensures reliable delivery Technical Data Article number: 4000833516NW Type: 6841 Product: Push-rod clamp Manufacturer: AMF Packaging unit: 1 Max. clamping/holding force: 1,000 N Numbers / Core technical data Stroke (Hub): 20 mm A: 8 mm B min.: 24.5 mm B max.: 44.5 mm D: 4.5 mm E: 20 mm H: 15 mm H1: 60.5 mm K: 7 mm L1: 91 mm L2: 16 mm M min.: 16 mm M max.: 19.5 mm M2: M12x1.5 N: 30 mm P: 20 mm Designs / Special features Small angled foot Pressure screw M4 x 20 Size: 1 Compact fixture footprint Mechanical actuation, no electronics FAQ What is the maximum holding force of the clamp? The clamp provides a maximum holding force of 1,000 N for secure retention in fixture applications. Which thread is used for mounting the clamp in a fixture? Mounting is via an M12x1.5 thread as specified for the unit. Can the clamp be used where space is limited? Yes, the small angled foot and compact size make the clamp particularly suitable for tight or edge-adjacent clamping positions. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Quick-Change Insert SES 16mm Square for DIN 374/376 M27, Adjustable Safety Clutch - TECWERK
Benefit from a combination of adjustable safety clutch and secure four-square shank torque transmission that reduces tap breakage and keeps production running. Order the quick-change insert directly from Metav Werkzeuge or consult the advisers for specification support. Quick-change insert SES 20 mm x 16 mm, Size 3 — adjustable safety clutch, for DIN 374/376 M27 (TECWERK) The Quick-change insert SES 20 mm x 16 mm (Size 3) is a tapping accessory engineered to limit torque and protect taps during manual and machine tapping applications compliant with DIN 374/376 M27. Adjustable safety clutch for torque limitation Prevents tap breakage during tapping operations Torque transmission via 16 mm four-square shank Compatible with DIN 374/376 M27 taps Controlled torque to prevent tool failure The core advantage is the adjustable safety clutch which limits the torque applied to the tap, preventing sudden overloads and the consequent tap breakage. This function converts an unpredictable failure mode into a manageable operational parameter, lowering scrap rates and downtime. The torque is transferred via a four-square shank, ensuring direct, backlash-free transmission to the tap shank for consistent thread quality. For technicians unfamiliar with torque-limiting systems: the clutch disengages when the preset torque threshold is reached, protecting both the tap and the workpiece while allowing rapid continuation of the process. Standardised fit for common tapping tasks Designed around industry standards, the insert suits taps manufactured to DIN 374/376 M27 and is prepared for workshop environments where repeatable fits are essential. The 20 mm diameter working face and the 16 mm square shank provide a compact interface that matches common drive systems. Because torque is taken through the square shank, different drive sizes require the corresponding insert variants; this modular approach maintains secure engagement and simplifies stock management when multiple shank standards are in use. Compact dimensions that integrate easily into tool setups The component’s geometry is optimised for insertion and removal in quick-change systems without compromising strength. Key dimensions (detailed below) show a compact profile suitable for tight assemblies while offering sufficient mass to stabilise the tap during engagement. The design keeps the centre of mass close to the drive axis, which reduces eccentric loads and supports consistent thread formation. Workshop operators benefit from reduced setup complexity and straightforward replacement when different shank sizes are required. Operational reliability and workflow benefits Integrating an insert with a torque-limiting mechanism translates directly into operational gains: fewer broken taps, fewer interrupted cycles and a safer working environment. The straightforward mechanical concept requires no electrical supply and is low-maintenance, making it a pragmatic choice for busy production floors. When paired with Metav’s distribution and advisory services, the solution supports predictable supply, technical guidance and a single-source procurement model that simplifies tooling logistics. For specification advice or to secure supply of the TECWERK SES quick-change insert with its adjustable safety clutch, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical assistance and reliable delivery. Technical data Article number: 4000832690NW Label: Quick-change insert SES 20 mm x 16 mm Size 3 for DIN 374/376 M27 Product type: Quick-change insert SES Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 20 mm Square shank: 16 mm L1: 45.2 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm D1: 48 mm Special features Adjustable safety clutch for torque limitation Prevents tap breakage during tapping Torque transmission via four-square shank Suitable for DIN 374/376 M27 taps Different inserts required for other shank sizes FAQ What safety function does this insert provide? The insert incorporates an adjustable safety clutch which limits torque to protect taps from overload and to reduce the risk of tap breakage during tapping operations. Is the insert compatible with standard M27 taps? Yes, the insert is intended for use with taps to DIN 374/376 M27 and is designed to interface via a 16 mm square shank. How is the torque transmitted to the tap? Torque is transmitted directly through the four-square shank, providing a positive drive with minimal play for reliable thread cutting. Are different shank sizes available? Different shank sizes require matching inserts; the current item uses a 16 mm square drive and other sizes must be ordered as separate insert variants. Where can the exact dimensions and specification be found? Exact dimensions, including L1, L3, L4, L5, D and D1, are provided above in the technical data and support accurate integration into existing tooling setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Reduction Bushing Form 2, Bore 20mm AD 25mm Clamping Length 46mm - TECWERK
A hardened, ground reducer sleeve delivers a precise interface between a 20 mm tool shank and a 25 mm toolholder while the 46 mm clamping length ensures stable support under load. Benefit from improved repeatability and reduced runout for consistent machining results. Order the reducer sleeve directly via Metav Werkzeuge or ask our consultants for tailored application advice. Reducer sleeve Form 2 – 20 mm bore, 25 mm outer diameter (TECWERK) A Reducer sleeve Form 2 engineered to adapt a 20 mm shank to a 25 mm holder, providing secure clamping in machining and tooling applications Hardened and ground finish for wear resistance Adapts 20 mm shanks to 25 mm holders 46 mm clamping length for stable support Compatible with Form E 2 toolholders Precision fit and secure clamping for reliable setups The hardened and ground surface of the reducer sleeve guarantees a tight, repeatable fit between the tool shank and holder. With a 20 mm bore matched to a 25 mm outer diameter, the component minimises radial play and contributes directly to reduced runout. Designed for use with Form E 2 toolholders, this bushing improves concentricity and helps maintain cutting accuracy over multiple tool changes, which is critical for consistent part quality. Stable support through optimised clamping length A 46 mm clamping length provides a broad contact area that enhances axial and radial stability during machining. The extended engagement reduces bending loads on the tool shank and spreads clamping forces, which helps to lower vibration and tool deflection. Engineers and technicians benefit from fewer setup adjustments and longer tool life because the increased support transfers load evenly across the interface. Simple integration into existing toolholder systems The reducer sleeve fits directly into standard toolholders conforming to the specified form, allowing easy replacement of worn adaptors without redesigning the spindle or holder stack. The element functions as a compact adaptor that restores compatibility between differing shank and holder diameters, reducing the need for multiple custom holders and simplifying tool inventory management. This pragmatic approach lowers downtime and streamlines workshop logistics. Consistent machining performance and operational confidence By combining a precise bore finish with heat treatment and grinding, the reducer sleeve delivers predictable behaviour across repeated cycles. The TECWERK reducer sleeve supports consistent setups and measurable improvements in process stability, helping to reduce scrap rates and rework. For production environments where repeatability is paramount, this bushing is a straightforward way to enhance throughput and maintain dimensional tolerances. For precision clamping tasks, request TECWERK reducer sleeves through Metav Werkzeuge—contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to check stock and receive application advice Technical Data Article number: 2000834206NW Brand: TECWERK Product type: Reducer sleeve Facts Bore diameter: 20 mm Outer diameter: 25 mm Clamping length: 46 mm Form: 2 Packaging unit: 1 Special features Hardened and ground For toolholder Form E 2 Label: Reduzierbuchse Form 2 Bohrungs-D.20mm AD 25mm Einspann-L.46mm TECWERK UID: 2000834206NW FAQ What is the primary function of the reducer sleeve? The reducer sleeve provides a precise mechanical interface that adapts a 20 mm shank to a 25 mm toolholder, improving clamping security and reducing runout for repeatable machining. Which toolholders are compatible with this sleeve? Compatibility is specified for Form E 2 toolholders; the TECWERK reducer sleeve (SKU 2000834206NW) is designed to seat directly into holders built to that form. How does the 46 mm clamping length affect stability? A 46 mm clamping length increases contact area between shank and holder, distributing forces more evenly, reducing deflection and vibration, and therefore improving tool life and surface finish. Is this sleeve suitable for heavy-duty or high-wear applications? The hardened and ground finish enhances wear resistance and dimensional stability, making the sleeve suitable for demanding machining cycles where consistent performance is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm T-Slot Nut 18mm M16 High Strength Class 10, DIN 508 - AMF
Take advantage of a DIN 508‑compliant design and M16 thread compatibility for reliable fixture assembly; the compact 20 mm height and 18 mm T‑slot fit make this T‑slot nut an efficient choice for standard clamping operations. Order the part directly via Metav Werkzeuge or consult the team for application guidance. T‑Nut 18mm M16 AMF — T‑slot nut for 18 mm T‑slots with M16 thread T‑Nut 18mm M16 AMF provides standardised fixation for clamping and fixturing in 18 mm T‑slot systems, engineered for repeatable engagement and predictable load transmission. Standard‑compliant DIN 508 Fits 18 mm T‑slots M16 internal thread Strength class 10 Consistent clamping performance for repetitive fixturing The component is designed to match the geometric requirements of DIN 508, which ensures a predictable fit in corresponding machine table grooves. This standardisation reduces setup variability and speeds up fixture changeovers, delivering measurable efficiency in production environments. The compact 20 mm height and form factors listed in the technical data contribute to stable seating and help to maintain alignment under clamping loads. Secure load transfer with M16 fastening Featuring an M16 thread, the nut mates with commonly used metric fasteners to provide robust clamping capacity. The combination of the thread size and the noted strength class 10 supports higher preload values where required, making the component suitable for medium‑duty to heavy‑duty applications in jigs, fixtures and workholding assemblies. The threaded interface is intended for straightforward use with standard bolts and threaded studs, simplifying maintenance of clamping systems. Direct compatibility with 18 mm T‑slot systems The geometry matches an 18 mm T‑slot profile, allowing the nut to slide into the slot and locate reliably along the table. This makes the part useful for modular fixturing where frequent repositioning is needed. The design parameters identified in the technical data (A, E, K dimensions) describe the engagement geometry and support predictable interaction with T‑slot rails and securing elements, which is critical for repeatable machining set‑ups. Workshop logistics and integration benefits With a single‑piece design and a packaging unit: 1, the component is easy to stock and issue for one‑off repairs or for fitting into existing sets of clamping hardware. The standard conformity and clear specification reduce the need for measurements on arrival and simplify procurement decisions. For purchasing managers seeking reliable supply and a consistent quality filter for the European market, Metav’s distribution and stock handling provide transparent order fulfilment from Emmerich. Contact Metav Werkzeuge for tailored advice on selection and availability of AMF T‑slot nuts, or request further technical clarification by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000833207NW Label: T‑Nutenstein DIN 508 T‑Nut 18mm M16 AMF Manufacturer: AMF Product type: T‑slot nut Facts Height: 20 mm T‑slot width: 18 mm Thread size: M16 Strength class: 10 A: 17.7 mm E: 28 mm K: 10 mm Packaging unit: 1 Special features Conforms to DIN 508 Suitable for clamping and fixturing in 18 mm T‑slots Compatible with standard M16 fasteners SKU/UID: 4000833207NW FAQ What slot size is this nut intended for? The nut is designed for an 18 mm T‑slot, providing standard engagement geometry for that slot width. Which thread does the nut accept? The component accepts an M16 fastener thread, compatible with commonly used metric bolts and studs. Is the nut specified to any standard? Yes, the design conforms to DIN 508, ensuring predictable fit and interchangeability in compliant T‑slot systems. What is the height of the nut and why does it matter? The nut has a height of 20 mm, which affects the seating depth and clearance in the slot and contributes to stable clamping. What strength class is indicated for this part? The data lists strength class 10, supporting higher preload and reliable load transfer for demanding clamping tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm T-Slot Nut M16 DIN 508 24mm Height, Strength Class 10 - AMF
The combination of DIN 508 conformity, a 20 mm T-slot fit and an M16 internal thread ensures reliable, standardised clamping for machine tables and fixtures; pairing these features with the strength class 10 rating supports demanding workshop applications. Order directly via Metav Werkzeuge or consult the specialists for tailored advice. AMF T-slot nut (DIN 508) — 20 mm, M16 thread The T-slot nut (DIN 508) AMF is a workshop-grade fastening element for secure fixture assembly in 20 mm T-slots on machine tables and extrusion profiles. DIN 508 standard compliance Fits 20 mm T-slots M16 internal thread Strength class 10 Consistent, standardised clamping that saves setup time The DIN 508 conformity guarantees interchangeability across compatible fixtures and table systems, simplifying procurement and reducing downtime. Using a standard T-slot insert that matches the 20 mm slot dimension avoids trial-and-error matching and enables quick replacement during retooling. This leads to shorter set-up times and predictable clamping behaviour, which benefits production planning and repeatable processes. Robust thread and load capability for secure joins With an M16 internal thread and a strength class 10 rating, the component provides a high-capacity threaded interface for clamping bolts and studs. The robust thread dimension allows the use of common metric fasteners, giving flexibility in selecting bolt grades and lengths suitable for the application. Such mechanical characteristics translate into dependable clamping force and stable fixturing under machining or assembly loads. Clear dimensions and workshop practicality Key dimensional values (for example A: 19.7, E: 32, K: 12, height: 24) permit straightforward integration into existing fixtures and CAD setups without guesswork. The compact geometry of the insert supports tight packing in multi-fixture arrangements and enables precise positioning along a T-slot. The simple form factor makes handling, inspection and inventorying easy for workshop staff and reduces the risk of fitting errors. Compatibility and procurement advantages Selecting a component that adheres to a recognised standard removes uncertainty in cross-sourcing and maintenance. The standardised design of this T-slot insert supports compatibility with a broad range of clamping systems and profile suppliers, facilitating smoother supply-chain decisions. Where exact specifications are critical, the listed numerical attributes allow rapid verification against technical drawings. For procurement or technical clarification on the AMF T-slot nut, contact Metav Werkzeuge for expert guidance and immediate order processing Technical data Article number: 4000833208NW Product: T-slot nut Manufacturer: AMF Facts T-slot width: 20 mm Thread: M16 Height: 24 mm A: 19.7 E: 32 K: 12 Strength class: 10 Packing unit: 1 Standard: DIN 508 Special features DIN 508 standardised form Designed for machine table T-slots Internal metric thread for common bolts Compact geometry for dense fixtures FAQ What slot size is the nut designed for? The nut is designed for a 20 mm T-slot and matches standard 20 mm profile systems and machine table grooves. Which thread size fits this T-slot nut? This T-slot insert features an M16 internal thread suitable for M16 bolts and studs. Is the nut compliant with any standards? Yes, the component conforms to DIN 508, ensuring interchangeability with other standardised T-slot hardware. What is the strength rating of the part? The item is specified with strength class 10, indicating a high-capacity threaded connection for demanding fixtures. What dimensions are available for integration checks? Key dimensions include A: 19.7, E: 32, K: 12 and a height of 24, allowing precise fit verification. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm T-Slot Nut Single M18 Thread - Vertex
Robust M18 threading paired with compatibility for a 20 mm T-slot delivers secure clamping in compact fixtures; the small footprint (19.7×38×12 mm) enables use where space is limited. Order the Vertex 3416M T-nut directly via Metav Werkzeuge or ask our consultants if needed. Vertex 3416M T-nut — M18 thread for 20 mm T-slot tables The Vertex 3416M T-nut is a single-piece T-slot nut engineered for reliable clamping in 20 mm machine table slots, offering a compact profile for tight fixture assemblies. M18 threaded connection For 20 mm T-slot tables Compact 19.7×38×12 mm profile Supplied individually for quick replacement Secure clamping where space matters The compact design of this T-nut provides a high-strength clamping point without compromising table clearance. Fitted with an M18 thread, the component is suitable for standard clamping bolts and provides predictable load transfer into the fixture. This structural combination reduces setup time on jigs and clamping fixtures and supports repeatable positioning in serial production environments. The small profile (19.7×38×12 mm) is beneficial for narrow slot layouts and retrofitting to existing machine tables. Compatibility with common T-slot systems Compatibility with a 20 mm T-slot ensures straightforward integration into many European machine tables and workholding systems. The geometry has been matched to standard slot tolerances so that installation is immediate and secure; misfits are minimised, reducing secondary adjustments. Where standardisation matters for interchangeable fixturing, this part provides a technically sound basis for modular clamping concepts and assists in maintaining consistent process parameters across multiple machines. Reliability and sourcing for production use Manufactured by Vertex, the nut is produced to industrial tolerances that support regular production use. Consistent thread quality and repeatable dimensions reduce the risk of thread wear and loosening during cyclic loading. Procurement through Metav Werkzeuge provides centralised access to European stock and a quality filter for incoming parts, which helps maintain uninterrupted supply chains and predictable maintenance planning for small and medium workshops. Practical installation and maintenance benefits Because the nut is supplied as a single item, replacement and inventory management are simplified for maintenance teams. The simple mechanical interface—M18 thread into a 20 mm T-slot—means no specialised tools are required for fitting or removal, and standard torque values can be applied to achieve secure clamping. This clarity of use shortens downtime during tool changes and supports efficient workshop workflows. Contact Metav Werkzeuge in Emmerich for stock availability of the Vertex 3416M T-nut and advice on integrating it into existing fixturing systems. Technical data Article number: 3416M GTIN: 4061905091032 Designation: T-nut Brand: Vertex Facts Dimensions: 19.7x38x12 mm T-slot width: 20 mm Thread size: M18 eClass: 21029107 Special features Supplied individually Compatible with 20 mm T-slot tables Compact profile for tight fixtures Single-piece design FAQ Which slot width is this nut designed for? The Vertex 3416M T-nut is designed for a 20 mm T-slot and fits common machine table slots with that nominal width. What thread size does the product use? This part uses an M18 thread, providing compatibility with standard M18 clamping bolts for reliable load transfer. Is the component supplied as a single item or in packs? The item is supplied individually; the Vertex 3416M is intended for straightforward replacement and stocking as single pieces. Can the nut be used in retrofit fixturing on existing tables? Yes, the Vertex 3416M T-nut, with its compact 19.7×38×12 mm profile and M18 thread, is suitable for retrofitting into appropriate 20 mm T-slots to extend or reconfigure fixturing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20mm Tool Holder E1 For Indexable Drill With Internal Coolant, DIN 69880 - TECWERK
Take advantage of the combination of standardised compatibility, rigid VDI40 support and internal coolant routing for reliable cycle times and extended tool life; order the holder directly via Metav Werkzeuge or consult the advisers for application-specific guidance. TECWERK E1 Tool Holder VDI40 — DIN 69880, 20 mm clamping The TECWERK E1 tool holder is a DIN 69880-compatible VDI40 holder engineered for indexable drills and coolant-fed drilling and turning applications. DIN 69880 compatibility for system interchange VDI40 shank for rigid, repeatable clamping Internal coolant supply for longer tool life 20 mm clamping diameter for indexable drills Consistent interfaces reduce setup time and uncertainty The holder is built to the DIN 69880 interface, which guarantees mechanical and dimensional compatibility across machines and adaptors. This standardised connection simplifies tooling choices and shortens setup times in mixed-machine environments. The standard interface means fewer adaptor checks, reduced fixture changes and a clearer procurement process; the result is improved machine uptime and more predictable production schedules. Coolant-fed drilling that protects inserts and cuts cycle costs Designed for tools with internal coolant feed, the holder channels cooling fluid directly to the cutting edge. Direct internal coolant reduces cutting temperatures and improves chip evacuation, which extends the life of indexable inserts and lowers tooling expenditure per hole. In practical terms, better cooling leads to fewer insert changes and more consistent hole quality, supporting leaner production runs and a stronger return on tooling investment. Rigidity and repeatability for precision holes The VDI40 shank geometry provides a secure mechanical interface that resists vibration and runout during heavy drilling. Rigid clamping minimises tool deflection, which directly benefits hole circularity and positional accuracy when using 20 mm indexable drills. For workshops that require repeatable tolerances, a stable holder is a straightforward way to reduce scrap and rework without complex process changes. Practical integration into workshop toolsets Form E1 and a cylindrical shank make the holder easy to combine with existing adaptors and tool magazines. Dimensional clarity (see technical data) permits straightforward storage and line-side organisation, while the construction supports both drilling and certain turn/drill tool combinations where internal coolant is advantageous. The component is a practical choice for production lines aiming to harmonise tooling standards and simplify maintenance procedures. Contact Metav Werkzeuge for application advice, compatibility checks or a tailored quotation for the TECWERK E1 tool holder with VDI40 shank Technical Data Article number: 2000833667NW Label: Werkzg.h.E1 DIN 69880 Spann-D.20mm VDI40 z.Wendeplattenbohrer TECWERK Product type: Tool holder for indexable drills Form: E1 Core dimensions Clamping diameter d2: 20 mm h1: 32.5 mm d1: 40 mm d3: 40 mm l3: 22 mm d6: 83 mm l1: 67 mm Design and special features DIN 69880 interface VDI40 shank Suitable for indexable drills Cylindrical shank Internal coolant supply Compatible with drilling and turning tools with coolant feed FAQ What machines will this holder fit? The holder is designed to the DIN 69880 interface and VDI40 shank standard, so the TECWERK E1 tool holder will fit spindles and adaptors that accept VDI40 tooling with DIN 69880 interfaces. Does the holder support internal coolant? Yes. The TECWERK E1 tool holder provides internal coolant routing to feed tools with through-coolant capability, improving chip removal and insert life. What clamping diameter is supported? The holder is specified for a 20 mm clamping diameter (d2 20 mm), intended for indexable drills designed for that bore size. Which tooling types are compatible with this holder? This E1-form holder is intended for indexable drills and compatible turn/drill tooling that require internal coolant and a VDI40 connection. How are the dimensions helpful for workshop planning? The clear dimensional data (d1, d3, l1, l3, etc.) facilitate magazine layout, storage and checking of machine-tool interfaces to avoid mismatches during setup. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Tool Holder E1 For Indexable Drills With Internal Coolant, DIN 69880 - TECWERK
Taking advantage of a standardised interface and coolant-through capability ensures consistent chip evacuation and stable clamping for insert drilling applications; the combination of VDI30 taper, DIN 69880 compliance and Form E1 shank supports reliable tool life and repeatable performance. Order the holder via Metav Werkzeuge or consult the Metav team for application matching and delivery options. Werkzeughalter E1 VDI30 for indexable insert drills — TECWERK tool holder with coolant-through and DIN 69880 interface Werkzeughalter E1 VDI30 for indexable insert drills provides a rigid, standardised connection for indexable insert drilling and compatible turning operations, optimised for internal coolant supply. *DIN 69880 interface for standard tooling *VDI30 taper for secure clamping and repeatability *Coolant-through feed for improved chip control *Cylindrical shank Form E1 for straightforward mounting Increase machining reliability with a standard interface The holder is built to the DIN 69880 specification, providing a dependable mechanical interface that reduces setup variability and eases tool changes. By using the VDI30 taper, the assembly achieves high radial rigidity and repeatable concentricity, which translates into improved hole quality and extended tool life. The standardised connection also simplifies tooling logistics in mixed-machine environments, allowing workshops and production cells to maintain consistent process parameters across different machines and operators. Controlled cooling and chip evacuation for cleaner holes Designed for tools with internal coolant supply, the holder’s coolant-through capability keeps the cutting zone flushed and temperatures under control. Forced coolant at the cutting edge reduces built-up edge formation and helps with chip evacuation when drilling deep or in difficult materials. For teams aiming for repeatable hole diameters and surface finish, the combination of internal coolant feed and a stable holder reduces rework and increases first-pass yield, particularly in series production or when processing heat-sensitive alloys. Compact geometry with clear dimensional references The compact Form E1 cylindrical shank keeps the overall tool projection short while preserving accessibility in tight setups. Key measures such as d2 = 20 mm and l1 = 67 mm define the coupling and projection geometry, aiding in fixture planning and collision checks. Clear dimensional data supports CAM programming and offline simulation, so the holder integrates smoothly into existing tool lists and NC setups. The design is compatible with indexable insert drills and similar modular tools, helping to standardise holder inventories for faster changeovers. Contact Metav Werkzeuge in Emmerich for technical advice or a tailored quotation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000833662NW Manufacturer: TECWERK Product type: Tool holder for indexable insert drills Form: E1 Standard: DIN 69880 Shank interface: VDI30 Packaging unit: 1 Dimensions and key measures d2: 20 mm h1: 28 mm d1: 30 mm d3: 40 mm h2: 30 mm l3: 22 mm d6: 68 mm l1: 67 mm Features and suitability Compatible with indexable insert drills Cylindrical shank (Form E1) For tools with internal coolant supply Suitable for drilling and turning applications FAQ What machines is this holder compatible with? This TECWERK E1 tool holder with VDI30 interface (SKU 2000833662NW) is compatible with machines that accept VDI30 tool holders and DIN 69880-style connections; machine spindle specifications must match VDI30. Can the holder be used with coolant-through indexable drills? Yes, the holder is designed for tools with internal coolant supply and supports coolant-through operation to improve chip evacuation and cooling. Which tool types fit this holder? The holder is intended for indexable insert drills and similar modular drilling/turning tools that match the Form E1 and VDI30 interface standards. Are the exact dimensions available for CAM and setup planning? Dimensional data such as d2 = 20 mm and l1 = 67 mm are provided in the technical section to support fixture design, CAM programming and collision checks. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Tool Holder E2 With Internal And External Coolant Through 83mm, DIN 69880 - TECWERK
Take advantage of the secure clamping of the Form E2 design combined with the VDI40 interface and integrated coolant paths for consistent machining results; the through-drilled construction and 20 mm boring-bar capability reduce setup time and avoid unnecessary modifications to tooling. Order the holder directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Tool holder E2 VDI40 for 20 mm boring bars The TECWERK tool holder E2 VDI40 is a standard-compliant clamping solution for boring-bar applications, designed to secure 20 mm bars with axial coolant supply for precise internal machining in workshop and production environments. Form E2 design for secure seating VDI40 interface for standard toolholders Internal and external coolant supply No shortening of boring bar required Stable clamping for repeatable boring results The E2-style holder is engineered for consistent axial alignment and minimal runout, making it suitable where repeatable hole geometry is required. Its VDI40 interface provides compatibility with common CNC tool turrets and adaptors, while the cylindrical shank design ensures a reliable fit in standard spindles. The arrangement minimises vibration and supports longer tool life, so operators benefit from fewer regrinds and more predictable cycle times. The construction focuses on functional precision rather than decorative finishes, delivering measurable improvements in process stability. Effective coolant routing to protect inserts and workpieces Integrated internal and external coolant supply channels permit targeted flushing at the cutting edge, removing chips and reducing thermal load during deep boring operations. The through-drilled design allows coolant to reach the bar tip directly, which helps maintain cutting-edge integrity and reduces the risk of built-up edge or workpiece distortion. Effective coolant management translates into lower scrap rates and fewer secondary operations, supporting a more efficient production flow and less manual intervention between operations. Designed for quick setup and workshop integration Compatibility with the DIN 69880 standard and the nominal 20 mm bar diameter simplify tool selection and mounting in mixed fleets. The holder’s geometry eliminates the need to shorten the boring bar prior to insertion, saving assembly time and preserving bar length for future use. With straightforward dimensions and standard interfaces, the component slots into existing toolholders and changeover routines with minimal adjustment, helping to reduce machine downtime and streamline daily workflows while supporting high-precision results. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK tool holder into production or for compatibility checks with existing tool systems. The Metav team in Emmerich is available to clarify specifications and application scenarios. Technical data Article number: 2000833682NW Manufacturer brand: TECWERK Product type: Werkzeughalter für Bohrstangen Form designation: E2 Packaging unit: 1 UID: 2000833682NW Core dimensions d2: 20 mm h1: 32.5 mm d1: 40 mm d8: 55 mm l6: 75 mm l3: 22 mm d6: 83 mm Standard: DIN 69880 Features and compatibility Through-drilled (axial coolant) Internal and external coolant supply Suitable for boring bars Cylindrical shank No shortening of boring bar necessary VDI40 interface FAQ Is this holder compatible with standard VDI turrets? The TECWERK tool holder E2 VDI40 is designed for VDI40 interfaces and fits standard VDI turrets that accept that interface size. Can coolant be supplied through the tool holder? Yes, the holder provides both internal and external coolant supply via a through-drilled channel to the boring bar tip. Does the boring bar require modification before mounting? No, shortening of the boring bar is not required; the holder accepts a 20 mm bar without additional machining. Which standard governs this holder’s interface and form? The holder conforms to DIN 69880 and uses the Form E2 specification for axial mounting and compatibility. What benefits does the through-drilled design bring? Through-drilled coolant delivery improves chip evacuation and reduces thermal stress at the cutting zone, which supports longer tool life and better surface finish. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Vertical Clamp Automatic Clamping Height Adjustment, 1100N - BESSEY
Take advantage of a compact, dependable clamping solution that combines automatic clamping height adjustment, a horizontal base foot for stable mounting and a reliable 1,100 N clamping force — ideal for speeding up light assembly and repeatable workholding. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Senkrechtspanner STC-VH Gr.20 – Vertical clamp with horizontal base foot and automatic height adjustment (BESSEY) The Senkrechtspanner STC-VH Gr.20 is a vertical clamp with a horizontal foot, designed for precise, repeatable workholding in light-duty assembly and workshop environments. Automatic clamping height adjustment Max. clamping force 1,100 N Clamping height H1 129 mm Horizontal base foot for stable mounting Consistent hold and measurable performance for efficient production The compact vertical clamp delivers repeatable clamping through its automatic clamping height adjustment, which eliminates manual readjustment between different workpieces and reduces setup time. With a rated 1,100 N of clamping force and an H1 clamping height of 129 mm, the unit provides a verifiable performance envelope that supports predictable cycle times. Described in clear numerical terms, these values let planners and workshop managers compare the clamp directly with alternative workholding solutions and therefore make an evidence-based selection for small-batch production or fixture work. Stable mounting and compact footprint for tight workspaces Featuring a horizontal base foot, the clamping unit mounts securely to benches and fixtures while keeping the vertical profile compact. At only 0.22 kg in mass and specified as size 20, the design minimises added load on jigs and simplifies handling during fixture changes. The low weight and small footprint are especially beneficial where multiple clamps are required on a single jig, enabling closer spacing without loss of stability. This combination supports efficient use of bench space and helps maintain ergonomic access for operators during assembly or inspection tasks. Straightforward operation that reduces setup complexity The automatic height regulation reduces operator steps: no manual shim stacking or repeated measurement is needed to obtain consistent clamping points. For workshops and small production lines, this translates into faster cycle preparation and fewer sources of variation. The device’s simple mechanical principle makes maintenance straightforward and predictable, lowering downtime risks and keeping throughput steady. Where accuracy and speed are priorities, the simplified workflow contributes directly to measurable productivity gains. Durable design and trusted brand background for reliable service life Built under the BESSEY designation and intended for general workshop use, the clamp emphasises durability and dependable function over time. The vertical clamping mechanism is engineered to withstand repetitive use common in assembly, prototyping and light fixture applications. Its robust clamping force and compact design provide peace of mind concerning safety and consistency, while supporting operators who need a reliable fixture element that performs without frequent adjustment. Contact Metav Werkzeuge today for tailored advice on integrating the BESSEY vertical clamp into existing fixtures or to arrange supply directly from Emmerich. Technical data Article number: 4000831136NW Type: STC-VH Label: Senkrechtspanner STC-VH Gr.20 waagrechter Fuß BESSEY Manufacturer: BESSEY Facts Weight: 0.22 kg Clamping height H1: 129 mm Max. clamping force: 1,100 N Packaging unit: 1 Special features Automatic clamping height adjustment Horizontal base foot Size 20 Product type: Vertical clamp (Senkrechtspanner) FAQ What maximum clamping force does the clamp provide? The Senkrechtspanner STC-VH Gr.20 provides a maximum clamping force of 1,100 N, suitable for light to medium holding tasks in assembly and fixture work. Which clamping height is available for this model? The clamp has a specified clamping height H1 of 129 mm, enabling consistent positioning across repeated workpieces. Is the clamp suitable for tight fixture layouts? Yes, the compact design and horizontal base foot make the unit appropriate for close spacing in jigs and benches, while its low mass of 0.22 kg minimises added load. How does the automatic height adjustment benefit production? Automatic height regulation reduces manual setup steps and repeat measurements, improving throughput and reducing variability in clamping position for repetitive workflows. Which brand manufactures this vertical clamp? This vertical clamp is supplied under the BESSEY designation and is intended for workshop and light assembly applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x200 mm Cylindrical Test Mandrel, Both Ends Centre, Runout Accuracy 0.005 mm - Metav IndustryLine
Combine runout accuracy of 0.005 mm, hardened gauge steel construction and bilateral centring for repeatable spindle and shaft inspections. Take advantage of reliable geometry and durable material for consistent quality control; order the cylindrical test mandrel M318.910 directly via Metav Werkzeuge or ask our consultants if needed. Cylindrical test mandrel M318.910 — Ø20×200 mm, runout accuracy 0.005 mm (Metav IndustryLine) The Cylindrical test mandrel M318.910 is a precision gauge designed for runout inspection of shafts, spindles and rotating assemblies in production and metrology environments. Cylindrical test mandrel Ø20 x 200 mm Runout accuracy 0.005 mm Both ends with centring Hardened gauge steel construction Reliable runout control for repeatable inspections The M318.910 mandrel provides a verified runout accuracy of 0.005 mm, enabling consistent assessment of spindle and shaft concentricity during inspection routines. Its defined diameter and length (Ø20×200 mm) produce a stable reference condition for measuring instruments, which reduces measurement scatter and shortens inspection cycles. The combination of tight tolerance and robust geometry supports decision-making in quality control and helps prevent downstream rework. Durable construction that preserves reference geometry Manufactured from hardened gauge steel, the mandrel resists wear and maintains cylindrical integrity under repeated use. The material choice delivers thermal and mechanical stability for workshop and laboratory conditions, which preserves the reference surface and minimises drift over time. With both ends centred, alignment in precision chucks and fixtures is simplified, improving repeatability when mounting the gauge in test machines or between centres. Practical integration into inspection workflows The cylindrical mandrel is intended for routine runout checks and serves as a dependable reference for alignment, assembly control and incoming inspection. Its moderate weight (approximately 1 kg) and standard dimensions make it straightforward to handle in quality departments while still offering sufficient mass to sit stably in fixtures. The mandrel complements dial indicators, digital comparators and other metrological tools, easing integration into existing measurement setups and documented test plans. Efficiency gains and quality assurance Using a stable cylindrical reference accelerates inspection throughput by reducing setup time and re-measurement. The mandrel’s precise geometry supports traceable comparisons between parts and fixtures, contributing to fewer rejects and improved process capability. Backed by the Metav IndustryLine offering, the tool aligns with a practical procurement approach that prioritises durable references and straightforward maintenance for continuous production environments. Contact Metav Werkzeuge to discuss application suitability and reserve the Metav IndustryLine cylindrical test mandrel M318.910 Technical data Article number: M318.910 GTIN: 4054469183824 Dimensions: Ø20 x 200 mm Material: Gauge steel, hardened Weight: 1 kg Facts Runout accuracy: 0.005 mm Diameter: 20 mm Length: 200 mm Special features Both ends with centring Suitable for runout inspection Category: Gauges / Mandrels Brand: Metav IndustryLine FAQ What runout accuracy can be expected from this test mandrel? The cylindrical test mandrel M318.910 achieves a runout accuracy of 0.005 mm, making it suitable as a high‑precision reference for spindle and shaft inspections. Which material is used for the mandrel and why? The mandrel is made from hardened gauge steel, selected for wear resistance and dimensional stability to preserve reference geometry under repeated use. How is the mandrel mounted for inspection tasks? The mandrel features both ends with centring, enabling secure placement between centres or in precision chucks to ensure reproducible alignment during measurements. Is the tool appropriate for workshop and laboratory use? Yes. The geometry and material provide a balance between handling convenience and metrological stability, making the mandrel well suited to production quality control and metrology labs. Which brand and SKU identify this product? This is the Metav IndustryLine cylindrical test mandrel, SKU M318.910, offered for runout inspection of rotating components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20x24x12mm Block for Guide Rail M6 T-Slot, S45C Steel Set of 4 - Vertex
Compact, robust and ready for repetitive workshop use: the block combines a proven medium‑carbon S45C construction with precise 20 × 24 × 12 mm dimensions to secure guide rails reliably. Supplied as a set of 4, the item supports M6 T‑slot mounting and keeps fixtures consistent across production runs. Order the block directly via Metav Werkzeuge or ask our consultants for tailored advice. Block for guide rail — compact mounting block with M6 T‑slot and S45C construction Block for guide rail designed to stabilise and position guide rails in workshop and production fixtures, suitable for use where compact, repeatable mounting is required Solid S45C medium‑carbon steel Compact 20 × 24 × 12 mm footprint Fits M6 T‑slot mounting Supplied as a set of 4 pieces Consistent positioning for repetitive assembly and machining The mounting element delivers a straightforward way to reproduce alignment across multiple setups. Thanks to the 20 × 24 × 12 mm footprint, the component fits into tight fixture arrangements while maintaining a defined clamping surface, reducing rework and downtime. When used in repetitive production, the compact form factor shortens setup time and supports process stability, which improves overall throughput and predictable output quality. Durable material for everyday workshop demands Manufactured from S45C, the block offers a balance between machinability and strength that is well suited to workshop conditions. S45C is a medium‑carbon steel grade that withstands the mechanical stresses of clamping and positioning without excessive brittleness. The material choice reduces wear under normal load cycles and enables local machining or finishing if adaptation to a custom fixture is required, extending the component’s service life within a busy production environment. Simple integration with standard T‑slot systems Designed for M6 T‑slot attachment, the block integrates directly into common guide‑rail fixtures and clamping tables. The M6 T‑slot compatibility allows straightforward bolting without additional adapters, simplifying parts procurement and inventory management. Supplied as a set of 4, the package supports multi‑point mounting strategies and ensures uniform contact across the rail length, improving straightness and load distribution during operation. Practical choice for shops and small‑series production As a compact mounting solution, the block suits metalworking shops, toolrooms and small‑series production where precision must be affordable and repeatable. The item’s modest dimensions and clear technical specification reduce ambiguity during component selection, while the reliable construction supports a range of fixture requirements. For procurement teams, the concise specification eases comparison and rapid decision‑making when standardisation is a priority. For availability and expert guidance on specifying this Vertex block for specific fixtures, contact Metav Werkzeuge in Emmerich and request assistance from our consultants to match the component to production requirements. Technical data Article number: 20TO20 GTIN: 4061905093227 ECLASS: 23300402 Facts Dimensions: 20 × 24 × 12 mm Weight: 0.2 kg T‑slot: M6 Pieces per set: 4 Versions / Special features Material: S45C Product type: Block for guide rail Supplied as set: true Manufacturer brand: Vertex FAQ What are the exact dimensions of the block? The block measures 20 × 24 × 12 mm, providing a compact footprint suitable for tight fixture designs. Is the block supplied as single pieces or in sets? The article is supplied as a set of 4 pieces, delivered together for multi‑point mounting and consistent installation. Which material is used for the block and what does it mean for durability? The component is made from S45C, a medium‑carbon steel grade; this gives a robust balance of strength and machinability for routine clamping tasks. Does the block fit standard T‑slot sizes? Yes, the block is designed for an M6 T‑slot connection, enabling direct integration into common T‑slot tables and guide‑rail fixtures. What is the manufacturer and SKU for ordering? The product is manufactured by Vertex and listed under SKU 20TO20, suitable for direct procurement through standard channels. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20x520mm Air Belt Sander For Curved And Flat Surfaces 16,000 rpm, 1.1 kg - Vertex
Take advantage of the combination of high rotational speed, a narrow 20 x 520 mm sanding belt and a lightweight 1.1 kg body for fast, precise surface finishing — order the VAG-320 directly via Metav Werkzeuge or ask our consultants if needed VAG-320 – Vertex pneumatic belt sander with 20 x 520 mm belt and 16,000 r.p.m. The VAG-320 is a compact pneumatic belt sander designed for controlled material removal on both curved and flat components in workshop and production environments 20 x 520 mm belt for narrow surfaces 16,000 r.p.m. for fast material removal Lightweight 1.1 kg body for easy handling Suitable for curved and flat surfaces Fast, consistent finishing for precision parts The pneumatic drive delivers a steady performance that supports repeatable surface results, while the narrow 20 x 520 mm belt enables focused abrasion in confined areas. At 16,000 r.p.m., the tool provides efficient stock removal without excessive vibration, which helps to maintain precision on profiles and edges. This combination reduces rework and supports a smoother workflow when preparing components for subsequent processes such as bonding, painting or fitting. Ergonomic design that eases operator workload With an overall length of 360 mm and a weight of just 1.1 kg, the sanding tool is designed for prolonged use with reduced operator fatigue. The slim form factor improves access to tight spaces and long reaches, while the compact mass makes handling more controlled during fine finishing operations. Ergonomic benefits translate directly into higher throughput and fewer process interruptions in busy workshops. Adaptable for curved and flat surfaces The belt geometry and compact head suit both curved and flat surfaces, permitting uniform contact and consistent finishing across diverse geometries. For components with complex contours, the narrow belt follows the profile more easily than wide abrasives, helping to preserve dimensional tolerances while delivering the required surface texture. The tool is therefore well suited to tasks ranging from edge blending to contour refinement. Integration into workshop systems and everyday use As an air-powered tool, the sander integrates readily into standard compressed air setups typical in industrial and artisan workshops. The simple pneumatic concept supports robust operation with straightforward maintenance routines, keeping downtime to a minimum. Combined with the unit’s compact dimensions and focused sanding capability, this makes the tool a practical choice for production lines and repair benches where reliable finishing is essential. For workshops seeking a compact, high-speed pneumatic belt sander, contact Metav Werkzeuge — our specialists at the Emmerich quality centre will advise on suitability and delivery Technical data SKU: VAG-320 GTIN: 4061905085536 eClass: 21060102 Speed: 16,000 r.p.m. Belt size: 20 x 520 mm Weight: 1.1 kg Length: 360 mm Facts Compact length 360 mm Low weight 1.1 kg High speed 16,000 r.p.m. Narrow belt 20 x 520 mm Special features Pneumatic drive Suitable for sanding curved and flat surfaces Compact, ergonomic design FAQ What applications is this belt sander suitable for? The VAG-320 pneumatic belt sander from Vertex is intended for finish sanding and material removal on both curved and flat components, suitable for contour work and edge finishing. What belt dimensions does the tool use? The tool accepts a 20 x 520 mm belt, which is ideal for narrow and detailed sanding tasks. What rotational speed does the sander provide? The VAG-320 operates at 16,000 r.p.m., enabling efficient and consistent material removal. Is the sander easy to handle during long tasks? Yes — at 1.1 kg and 360 mm length the tool is lightweight and compact, supporting extended operation with reduced operator fatigue. What are the product identifiers for ordering or stock control? SKU: VAG-320; GTIN: 4061905085536 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20x60x150mm Tischnutenplatte aus SS41C, M12x1,75P Gewinde, 1,4kg - Vertex
Als kompaktes Element für präzise Spannaufgaben überzeugt die Kombination aus stabiler Materialwahl und genormter Befestigung; die Platte ermöglicht zuverlässige Fixierungen und einfache Integration in Maschinenaufbauten. Nutzen Sie die robuste Fertigung und die praxisgerechte Abmessung für klar definierte Arbeitsergebnisse. Bei Fragen berät Metav persönlich und liefert technische Details direkt an Ihre Werkbank. Tischnutenplatte TP-150-20 von Vertex Die Tischnutenplatte TP-150-20 ist eine kompakte Spannplatte für Maschinenaufbauten und Vorrichtungen, konzipiert für einfache Montage und wiederholgenaue Befestigung. Robuste Ausführung aus SS41C Stahl Gewinde M12x1,75P für sichere Befestigung Abmessung 20x60x150mm für kompakte Aufbauten Leichtes Gewicht 1,4 kg für einfache Handhabung Präzise T-Nutenoberfläche für wiederholgenaue Spannung Materialfestigkeit schafft stabile Basis für Vorrichtungen Die Platte ist aus SS41C gefertigt, einem in der Werkstattpraxis verbreiteten Stahlwerkstoff. Diese Wahl ermöglicht eine robuste Grundstruktur und sorgt für Formtreue bei wiederholter Nutzung. Durch die Materialwahl lassen sich handelsübliche Spannmittel und Befestigungen problemlos verwenden, wodurch die Platte in vorhandene Aufspannkonzepte integriert werden kann. Ein langlebiger Einsatz reduziert Rüstzeiten und Wiederholaufwand. Normierte Befestigung für sichere Montage und Austauschbarkeit Das integrierte Gewinde M12x1,75P bietet eine standardisierte Schnittstelle zur Befestigung von Schrauben und Spannschrauben. Diese Normung erleichtert den Austausch von Komponenten und erlaubt die Nutzung handelsüblicher Schraubensätze ohne Sonderanfertigung. Für Anwender bedeutet das weniger Lagerbedarf an Exoten und schnellere Montageprozesse, die den Workflow in Werkstatt und Fertigung optimieren. Kompakte Abmessungen für flexible Einbaumöglichkeiten Mit den Maßen 20x60x150mm fügt sich die Platte platzsparend in enge Aufnahmen und modulare Vorrichtungen ein. Die kompakte Bauform eignet sich besonders für Retrofit-Projekte und Nachrüstungen an Werkzeugmaschinen, wo Platz und Gewicht begrenzend wirken. Durch das geringe Gewicht von 1,4 kg bleibt die Handhabung sicher und ermüdungsarm, was gerade bei häufigen Umrüstungen von Vorteil ist. Zielgruppe und typische Einsatzfelder Die Platte richtet sich an Anwender in Handwerk, Fachbetrieb und kleiner Serienfertigung, die eine verlässliche Spannfläche benötigen. Einsatzorte sind Spannaufnahmen auf Fräsmaschinen, Prüfflansche und Vorrichtungsaufbauten. Die Kombination aus standardisierten Gewindeanschlüssen und kompakten Maßen macht die Platte zur pragmatischen Lösung für Anwender, die robuste, sofort einsetzbare Komponenten bevorzugen. Empfehlung: Für passgenaue Montage und technische Beratung zur Tischnutenplatte TP-150-20 kontaktieren Sie Metav per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: TP-150-20 Marke: Vertex Bezeichnung: Tischnutenplatte Material: SS41C Daten Gewicht: 1,4 kg Abmessung: 20x60x150mm Gewinde: M12x1,75P eClass: 23360290 Besonderheiten Material: SS41C (Stahllegierung, praxisüblich) Gewinde: M12x1,75P (metrisches Feingewinde) UID: TP-150-20 FAQ Wie groß ist die Tischnutenplatte und wie schwer ist sie? Die Tischnutenplatte TP-150-20 hat die Abmessung 20x60x150mm und ein Gewicht von 1,4 kg, was die Platte für kompakte Aufbauten und einfache Handhabung prädestiniert. Welches Material wird verwendet und was bedeutet das für die Anwendung? Gefertigt aus SS41C, ist die Tischnutenplatte TP-150-20 aus einem in Werkstattanwendungen üblichen Stahlwerkstoff; das unterstützt robuste Montage und Kompatibilität mit Standard-Spannmitteln. Welches Gewinde ist vorhanden und welche Befestigungen passen? Die Platte verfügt über ein Gewinde M12x1,75P, das handelsübliche M12-Schrauben mit feiner Steigung aufnimmt und so sichere Befestigungen ermöglicht. Für welche Anwendungen eignet sich die Tischnutenplatte besonders? Typische Einsatzgebiete sind Vorrichtungsaufbauten, Nachrüstungen an Fräsmaschinen sowie Prüfvorrichtungen, bei denen kompakte, wiederholgenaue Spannflächen benötigt werden. Wer liefert technische Beratung und Zubehör für die Montage? Metav bietet technische Beratung und kann bei der Auswahl passender Befestigungselemente unterstützen; geben Sie bei Anfragen die SKU TP-150-20 sowie die Marke Vertex an, damit Empfehlungen präzise erfolgen. Hersteller: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20x60x90mm T-Slot Table Plate M12x1.75 Thread, SS41C - Vertex
Compact, robust and precisely threaded, the TP-90-20 combines durable SS41C steel construction with a metric M12×1.75 thread and a compact 20×60×90 mm footprint for dependable fixture performance; order the TP-90-20 directly via Metav Werkzeuge or ask our consultants for application advice TP-90-20 T-slot plate by Vertex — SS41C, M12×1.75 thread A TP-90-20 T-slot plate engineered to provide secure clamping and straightforward fixture integration in machining and toolroom environments Robust SS41C steel construction M12x1.75 metric threaded connection Compact 20×60×90 mm footprint Precise design for repeatable clamping Reliable clamping with a compact footprint The T-slot plate delivers a stable interface for clamping setups thanks to its SS41C steel build and compact format. With dimensions of 20×60×90 mm and a mass of 0.85 kg, the component offers a high strength-to-size ratio that supports tight installation constraints while maintaining lateral and torsional resistance. The compact footprint reduces occupied table space and facilitates denser fixture layouts, supporting more efficient use of machine beds and workholding arrays. Straightforward integration through standardised threading Equipped with a M12×1.75 metric thread, the plate is compatible with common clamping hardware and fasteners, enabling quick assembly into existing fixture systems. The metric thread specification ensures repeatable torque and secure engagement with clamping studs or bolts, which contributes to reduced setup time and consistent workpiece positioning. The standardised connection supports modular workflows and simplifies inventory management for production and maintenance teams. Durability, traceability and supply reliability Built by Vertex, the component is identifiable via SKU TP-90-20 and GTIN 4061905092268, which aids procurement and stock control. The choice of SS41C reflects a balance between machinability and toughness for general workshop use. Sourcing through Metav Werkzeuge provides an added layer of quality assurance and a reliable European distribution channel, benefitting operations that require consistent availability and verified product origin Contact Metav Werkzeuge for tailored advice on integrating the TP-90-20 into existing fixture systems or to request delivery from our Emmerich stock Technical Data Article number: TP-90-20 GTIN: 4061905092268 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Dimensions: 20 × 60 × 90 mm Weight: 0.85 kg eClass: 23360290 Special features Material: SS41C Thread: M12 × 1.75 Type: T-slot plate (Tischnutenplatte) FAQ What material is the plate made from? The plate is manufactured from SS41C, a structural steel grade used for robust workshop components. What are the exact external dimensions? The external dimensions are 20 × 60 × 90 mm, suited to compact fixture arrangements. Which thread size is provided for fastening? Fastening is via an M12×1.75 metric thread for compatibility with standard clamping hardware. How heavy is the component and how does that affect handling? The unit weight is 0.85 kg, providing a stable feel while remaining manageable for manual positioning during fixture assembly. How can this part be identified for ordering or inventory? The component is listed as SKU TP-90-20 and GTIN 4061905092268, manufactured by Vertex for clear identification and procurement Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
21.5mm Rubber Flex Collet For VTA7 Thread Cutting Attachment, Fits Ø7–Ø10mm - Vertex
Take advantage of precise vibration damping, compact design and compatibility with VTA7 threading units to maintain consistent thread quality and reduce rework. Order the component directly via Metav Werkzeuge or contact our consultants for specification checks and supply options. FC-21 Rubber-Flex collet — Flexible collet for VTA7 threading units, Ø21.5 mm (Vertex) A FC-21 Rubber-Flex collet designed for the VTA7 threading apparatus, offering elastic clamping for small-diameter bar stock and improved process stability in serial thread-cutting applications. Flexible rubber damping Designed for VTA7 threading units Fits Ø21.5 mm nominal diameter Suitable for Ø7–Ø10 mm shank diameters Consistent clamping for more reliable thread results The elastic Rubber-Flex design provides vibration damping that reduces chatter during thread cutting, which leads to improved surface finish and fewer rejects. By combining flexible material behaviour with a precise nominal diameter of Ø21.5 mm, the collet stabilises small workpieces in the spindle, allowing cutting tools to perform at their intended feed and speed. This translates into shorter cycle times and a more predictable production output for workshop and light-industry environments where repeatability matters. Compact profile that simplifies handling and changeover With a compact length of 13 mm, the clamping sleeve minimises overhang in the spindle and supports neat tool layouts on the VTA7 unit. The reduced projection helps to lower bending forces on slender workpieces and facilitates faster changeovers when different shank sizes are processed. Compatibility with shank diameters Ø7–Ø10 mm makes it suitable for a wide range of small-diameter bars and rods, while the simple mechanical interface keeps maintenance straightforward and quick. Built for continuous use and straightforward maintenance The design focuses on uptime: elastic clamping avoids concentrated forces that can cause premature wear on either the workpiece or the collet itself, and replacement is quick when required. As a Vertex original part with SKU FC-21, the component integrates into established threading workflows and supports stable process parameters, reducing the need for frequent adjustments. Choosing a robust clamping solution improves operational reliability and helps to centralise procurement needs under a trusted supplier. For dependable clamping with Vertex quality and tailored advice, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility and rapid supply options. Technical data SKU: FC-21 GTIN: 4061905094873 eClass: 21041712 Designed for: VTA7 threading unit Facts Nominal diameter: 21.5 mm Length: 13 mm Suitable shank diameters: Ø7–Ø10 mm Special features Rubber-flex damping clamping Precision fit for small-diameter workpieces Intended for thread-cutting operations FAQ What machine is the collet compatible with? The collet is intended for use with the VTA7 threading unit; the Vertex FC-21 Rubber-Flex collet matches the unit’s interface and mounting requirements. Which shank diameters can be clamped with this collet? The FC-21 is suitable for shank diameters in the range Ø7–Ø10 mm, providing stable retention for small-diameter bars and rods. How does the Rubber-Flex design benefit thread cutting? Elastic damping from the Rubber-Flex clamping sleeve reduces vibration and chatter during cutting, resulting in improved surface finish and fewer rework cycles when using Vertex clamping components. Is the collet easy to replace during maintenance? Yes; the compact length and straightforward interface of the FC-21 simplify removal and replacement, supporting quick maintenance and minimal machine downtime. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com