Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
200mm Chuck Key 11mm Square With Spring-Loaded Sleeve, Insert Square - RÖHM
Take advantage of the combination of reliable engagement, safety-enhancing design and straightforward procurement for uninterrupted workshop operation. The spring-mounted sleeve prevents accidental retention of the key in the chuck while the 11 mm four-sided square drive ensures positive torque transfer. Order the tool directly via Metav Werkzeuge or consult our advisers for specification checks. Chuck key for 200 mm chuck, 4-sided square 11 mm – RÖHM A Chuck key for 200 mm chuck engineered for secure tightening and release of lathe chucks, featuring a spring-mounted sleeve to avoid the key being left in the chuck Spring-mounted sleeve prevents key sticking 11 mm four-sided square drive Designed for 200 mm chucks Positive insertion square for secure fit Safer operation that reduces interruptions The integrated spring-mounted sleeve is designed to prevent the key from becoming lodged in the rotating chuck, a common cause of unscheduled stops. This safety feature reduces the risk of incidental damage to the workpiece and the machine spindle, contributing directly to reduced downtime and fewer workflow interruptions. For workshops that value continuous production and predictable cycle times, this mechanical safeguard delivers clear operational benefits without adding complexity to routine clamping tasks. Positive engagement for reliable torque transfer The 11 mm four-sided square drive provides a positive mechanical interface between key and chuck, improving torque transfer and minimising slippage compared with round pin designs. This characteristic supports faster, safer tightening and loosening cycles and helps maintain consistent clamping force across repeat operations. The result is a more dependable clamping process that supports quality assurance and efficient use of machine time. Designed to fit common workshop chucks and workflow Built to match the dimensions of a 200 mm chuck, the tool integrates into standard machining stations and can be stored alongside other hand tools without occupying excessive space. The insertion square ensures a secure engagement that gives operators confidence during repetitive tasks. Supplied as a single unit, the item is straightforward to add to procurement lists and to keep as a standby critical for lathe maintenance and set-up operations. For professional workshops prioritising safety and repeatability, request further technical details on the RÖHM chuck key from Metav Werkzeuge or speak directly with our Emmerich team at info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4121409070NW Label: Spannschlüssel f.Futter-D.200mm 4-KT.11mm RÖHM Brand: RÖHM Product type: Chuck key Core specifications Square drive: 11 mm Suitable for chuck Ø: 200 mm Packaging unit: 1 Special features Spring-mounted sleeve prevents accidental retention of the key in the chuck Insertion square for secure engagement Four-sided (4-KT) drive for positive torque transfer FAQ Is this key compatible with any 200 mm chuck? The RÖHM chuck key is designed for use with chucks of 200 mm nominal diameter and a corresponding square drive; compatibility depends on the chuck drive interface matching the 11 mm square How does the spring-mounted sleeve work in practice? The spring-mounted sleeve holds the key in its engaged position and releases under light axial movement, preventing the key from being unintentionally left in the chuck during operation What maintenance does the key require? Periodic inspection for wear at the square drive and light lubrication of moving parts will keep the chuck key performing reliably; replace if the insertion square shows deformation Can the key be used on stationary chucks and removable chucks? The tool is intended for chucks that accept an 11 mm insertion square; both stationary and removable chucks with matching interfaces are suitable Does the product include any additional accessories? The delivery comprises the chuck key as supplied (packaging unit: 1); no additional accessories are listed Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamp Screw M14x2P, Heat-Treated Steel - Vertex
Take advantage of the combination of robust material choice and standardised thread form for reliable fixture performance; the product’s heat-treated steel construction and M14x2 thread ensure consistent clamping and long service life. Order the component via Metav Werkzeuge or request tailored advice from our consultants. Clamping screw 1348MA — heat-treated steel, M14x2 thread (Vertex) A clamping screw for secure fixture assemblies in industrial and workshop clamping technology, engineered to deliver consistent holding power for jigs, fixtures and machine setups. Heat-treated steel construction M14x2 thread form for standard fittings 200 mm overall length for deep reach Reliable workshop fastening component Robust material for long service life and repeatable clamping The use of heat-treated steel gives the component a high resistance to wear and deformation under load, which translates into consistent clamping over many cycles. In practical terms, the material choice reduces the need for frequent replacement and supports predictable maintenance intervals; this makes the fastener suitable for repetitive production tasks where downtime is costly. The combination of material hardness and machining precision contributes to a secure joint without excessive thread wear. Standardised thread and dimensions for seamless integration With an M14x2 thread and an overall length of 200 mm, the screw is compatible with many commercially available clamping systems and machine interfaces. The standard thread pitch eases retrofitting into existing fixtures and minimises the need for bespoke adaptors; this supports efficient assembly workflows and reduces set-up times. Precise thread form also helps to maintain axial alignment during tightening, improving the repeatability of clamped parts and lowering scrap rates. Practical benefits in daily workshop use Designed as a straightforward fastening solution, this clamp screw offers installers and machinists a familiar handling experience: the thread engagement and shaft length enable deep access while the 0.2 kg mass provides tactile feedback for manual fitting. Such characteristics improve operator confidence during set-up and support faster cycle changes. The component’s simple geometry also facilitates cleaning and inspection, which aids adherence to workshop quality routines and keeps fixtures functioning reliably. Quality assurance and supply reliability Manufactured by Vertex and supplied through Metav Werkzeuge, the component is backed by a distribution network that emphasises availability and quality control. Stocking together with routine workshop consumables simplifies procurement and helps maintain consistent production throughput. The adherence to industry-standard thread forms and a tested material process provides an objective basis for selecting this clamping element when reliable fixture performance is required. For personalised advice, stock availability or to arrange a quotation for the Vertex clamping screw 1348MA, please contact Metav Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 — our consultants will confirm compatibility and delivery options. Technical data Article number: 1348MA GTIN: 4061905093319 Manufacturer: Vertex Facts Length: 200 mm Weight: 0.2 kg Special features Material: heat-treated steel Thread: M14x2P Suitable for clamping technology applications FAQ What materials is the clamping screw compatible with? The Vertex clamping screw 1348MA, made from heat-treated steel, is intended as a fastening component for fixture assemblies and is compatible with standard clamping interfaces used across metalworking and general workshop applications. Is the thread form compatible with common clamping hardware? Yes, the M14x2 thread on the 1348MA matches standard M14 fittings, allowing straightforward integration into existing fixture plates and clamping elements without special adapters. How does the material treatment affect service life? Heat treatment increases the hardness and wear resistance of the screw, which helps the Vertex 1348MA maintain thread integrity and clamping performance over repeated cycles, reducing frequency of replacement. Can the screw be used for precision jigs and fixtures? The precise thread form and consistent shaft length of the 1348MA make it suitable for jigs and fixtures where repeatable clamping and dimensional stability are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Clamp Screw M24x3P Heat-Treated Steel - Vertex
Take advantage of a robust heat-treated steel construction paired with a precise M24 x 3 mm pitch thread and a 200 mm overall length to ensure secure, repeatable clamping in demanding workshop and production environments. Order the clamping screw directly via Metav Werkzeuge or ask our consultants if needed. Clamping screw 1388M by Vertex — M24 x 3 mm pitch, 200 mm The clamping screw 1388M is a heavy-duty fastening element designed for secure fixture and reliable clamping in industrial and workshop applications. Heat-treated steel construction Precision M24 x 3 mm pitch thread 200 mm overall length Robust 0.6 kg mass Secure holding for repeatable setups A dependable clamping solution is essential for reproducible results on jigs, fixtures and modular workholding. The heat-treated steel body provides high resistance to deformation under load, which translates into stable clamping forces over repeated cycles. As a result, setup times are reduced and component alignment remains consistent, supporting uninterrupted production and lower scrap rates. The combination of mass and material also minimises vibration during machining, improving surface finish and process reliability. Accurate thread for precise positioning The M24 x 3 mm pitch metric thread delivers fine axial adjustment and secure engagement in threaded receivers. Fine-pitch threads convert smaller rotational inputs into precise linear movement, enabling exact clamping depth and repeatable torque application. For applications where consistent preload is required, the defined pitch and robust thread form reduce the risk of loosening and ensure predictable clamping behaviour. The fastening element’s geometry supports controlled torque application and straightforward maintenance procedures. Built for durability and low maintenance Constructed from heat-treated steel and weighing 0.6 kg, this clamping fastener is engineered for long service life under industrial use. Heat treatment increases surface hardness and fatigue strength, extending intervals between replacements and reducing total cost of ownership. The 200 mm length offers ample engagement for thicker workpieces or deep fixture threads. Where corrosion or specialised environments are a concern, material choice and surface treatments should be considered; Vertex components are designed to integrate with standard workholding systems and routine inspection schedules to maintain performance. For tailored advice on integrating Vertex clamping solutions into existing fixtures and for reliable supply from Metav Werkzeuge in Emmerich, contact our product consultants for detailed recommendations and order support Technical Data Article number: 1388M GTIN: 4061905091551 Manufacturer: Vertex Core measurements Length: 200 mm Weight: 0.6 kg Thread: M24 x 3 mm pitch Special features Material: Heat-treated steel eClass: 21022190 Category: Clamping screw FAQ What materials is this clamping screw suitable for? The clamping screw 1388M, manufactured by Vertex, is designed as a general-purpose clamping element; suitability depends on the fixture and mating components rather than a single workpiece material. How is the thread specified and what does it mean? The thread is metric M24 x 3 mm pitch, which denotes a 24 mm nominal diameter with a 3 mm axial pitch for each full turn, providing fine linear adjustment. What maintenance does the clamping screw require? Routine inspection for thread wear and lubrication of the mating threads prolongs service life; Vertex clamping components benefit from scheduled checks in high-duty environments. Can this fastening element be used in precision fixtures? Yes. The 1388M fastener’s fine pitch and stable, heat-treated construction make it suitable for precision fixtures where repeatable clamping and low backlash are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Clamping Arm Clamp Swivel Height Adjustable 28x11mm Rail Section - BESSEY
Take advantage of a robust clamping solution that combines a 200 mm clamping height with an adjustable outreach of 123–140 mm for stable, repeatable setups; order the BESSEY gripping-arm clamp directly via Metav Werkzeuge or consult our specialists for application advice. BESSEY gripping-arm clamp — clamping height 200 mm, adjustable outreach BESSEY gripping-arm clamp for flexible clamping on compatible rails, suitable for assembly and workshop fixtures Clamping height 200 mm Adjustable outreach 123–140 mm Rail cross-section 28 x 11 mm Swivelling and height-adjustable design Stable clamping for repeatable production steps The clamping height of 200 mm and the adjustable outreach of 123–140 mm deliver a reliable working envelope for a wide range of fixtures. This configuration produces a consistent clamping force across the stroke, which helps to reduce rework and downtime during repetitive tasks. The precise height range supports accurate alignment of parts at different stages of preparation or assembly, while the adjustable reach permits positioning of the clamping arm without compromising accessibility. Such predictability in process performance is particularly valuable when short setup times and high repeatability are required. Adaptable mounting and ergonomic operation Compatibility with a rail cross-section of 28 x 11 mm ensures straightforward integration into standard profile systems and modular workstations. The swivelling function combined with height-adjustable capability allows the clamping arm to be oriented and set to the optimal working position, improving operator ergonomics and part access. The design reduces the need for awkward handling and supports faster cycle times, since the arm can be repositioned quickly without tools. For workshops that change fixtures frequently, this flexibility minimises fixture rework and increases throughput. Efficient handling that supports shop-floor safety Fast, secure engagement is integral to the clamp’s concept: the gripping-arm design secures components with predictable clamping geometry, enabling safe machining or assembly operations. The ability to set the outreach and height precisely contributes to a repeatable set-up, reducing the likelihood of slippage or misalignment during processing. Reduced handling and clearer part orientation also lower the chance of incidental contact, supporting safer routines at the bench or on jigs. Overall, the device focuses on operational efficiency while maintaining a conservative approach to workplace safety. Proven brand quality delivered with Metav reliability Sourced from BESSEY, the product benefits from a reputation for practical clamping solutions; when supplied by Metav Werkzeuge it comes with the assurance of a vetted European distribution point. Metav’s Emmerich location acts as a quality filter for customers across industry and trade, and the company’s experience—reflected in a large customer base and a broad catalogue—supports reliable supply and expert consultation. For procurement teams seeking to reduce supplier complexity, the combination of a recognised clamp manufacturer and Metav’s distribution network simplifies logistics and supports long-term availability. Contact Metav Werkzeuge to specify the right BESSEY gripping-arm clamp for the application and arrange supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss requirements and delivery options Technical Data Article number: 4123745010NW Label: Greifarmspanner Spann-H.200mm A.123 -140mm Schienenquerschnitt 28x11mm BESSEY Brand: BESSEY Product type: gripping-arm clamp Packaging unit: 1 Facts Clamping height: 200 mm Outreach: 123–140 mm Rail cross-section: 28 x 11 mm Special features Swivelling function Height-adjustable design Adjustable outreach FAQ Is the clamp compatible with standard 28 x 11 mm rails? Yes. The clamp is designed for mounting on rails with a 28 x 11 mm cross-section, which enables secure attachment and straightforward integration into modular fixtures with that profile. What clamping height does the BESSEY gripping-arm clamp provide? The BESSEY gripping-arm clamp offers a clamping height of 200 mm, suitable for a variety of assembly and workshop tasks that require higher clearance. Can the outreach be adjusted while the clamp is in position? The outreach is adjustable across the 123–140 mm range and the unit’s swivelling and height-adjustable features allow repositioning to suit the workpiece without extensive disassembly. For which workshop applications is this clamp particularly suitable? The clamp is well suited to fixture assembly, jigs, and repetitive holding tasks where predictable positioning and quick reconfiguration are priorities, especially when integrated into 28 x 11 mm rail systems. How does the clamp support repeatable setups? By combining a fixed 200 mm clamping height with an adjustable outreach and a swivelling, height-adjustable mount, the clamp enables repeatable part orientation and consistent clamping geometry across production cycles. Manufacturer: BESSEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Bar for T-Slot 20/22mm, DIN 6316 - AMF
Take advantage of a standardised, fast and reliable clamping solution that supports both 20 mm and 22 mm T-slots and is suited for M20 and M22 fastenings; secure procurement and expert advice are available through Metav Werkzeuge for seamless workshop integration. AMF clamping bar (DIN 6316) for T-slot 20 + 22 mm, 200 mm The AMF clamping bar (DIN 6316) is a compact, machine-table clamping component designed for secure fixture work in benches and milling tables with 20 mm and 22 mm T-slots. DIN 6316 compliance for standardised clamping Fits T-slots 20 mm and 22 mm Length 200 mm for versatile use Compatible with M20 and M22 fastenings Faster setups through a standards-based fixture The DIN 6316 specification ensures that the clamping geometry and interfaces adhere to established workshop norms, which reduces fitting ambiguity and streamlines setup procedures. With a repeatable geometry, changeovers become more predictable and setup time is reduced, helping to keep machine downtime to a minimum. This benefit is particularly relevant for production environments where process reliability and rapid fixture exchange matter. One component for two common T-slot sizes Designed to work with both 20 mm and 22 mm T-slot systems, the clamping bar eliminates the need to hold separate stocks for each slot size. Compatibility with M20 and M22 fastenings further simplifies inventory and tooling decisions, allowing a single fixture element to serve multiple table standards. The resulting consolidation supports leaner stores and fewer procurement lines without sacrificing flexibility. Reliable hold and predictable performance in everyday use Engineered and manufactured to comply with the stated standard, the clamping bar delivers consistent interface fits and predictable clamping behaviour. The standard conformity supports repeatable clamping forces and accurate positioning, which contributes to improved process stability and reduced rework. For workshops aiming for dependable results across routine machining, the standardised component is a straightforward way to raise consistency without complex retrofitting. For straightforward integration and dependable supply of AMF clamping components, contact Metav Werkzeuge for ordering and product selection support—Metav Werkzeuge offers technical advice and reliable delivery from Emmerich to your workshop. Technical Data Article number: 4000833062NW Norm: DIN 6316 Designation: Spanneisen DIN 6316 for T-slot 20+22 mm L.200 mm AMF Product type: Clamping bar Manufacturer: AMF Packaging unit: 1 Facts Width: 22 mm Total length: 200 mm T-slot compatibility: 20 + 22 mm Suitable for: M20, M22 Special features Standardised interface to DIN 6316 Dual T-slot compatibility (20 mm and 22 mm) Direct fit for M20 / M22 fastenings Compact 200 mm length for versatile clamping FAQ What tables will this clamping bar fit? The clamping bar is suitable for machine tables and fixtures with 20 mm or 22 mm T-slots, offering direct compatibility without adaptors. Can this component be used with M20 and M22 bolts? Yes, the design supports fastenings in M20 and M22, enabling secure attachment to standard clamping systems. Is the clamping geometry compliant with an established standard? The clamping bar meets DIN 6316, guaranteeing standardised interface geometry and predictable fit on compliant tables. What length is the clamping bar and how does that affect use? At 200 mm overall length, the bar provides a compact clamping span suitable for tight fixtures and modular setups where space is limited. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Bar T-Slot 24/28mm DIN 6316, For M24 Thread - AMF
Take advantage of standardised compatibility, robust clamping performance and simple integration into existing T‑slot table setups — order the component via Metav Werkzeuge or contact our consultants for specification matching. AMF clamping iron (DIN 6316) for T‑slot 24/28 mm, 200 mm AMF clamping iron (DIN 6316) for T‑slot 24/28 mm, 200 mm offers a standardised clamping solution for machine tables with T‑slots of 24 and 28 mm, designed to integrate with M24 clamping systems. Standardised DIN 6316 compliance Fits T‑slot 24 and 28 mm 200 mm usable length Compatible with M24 clamping bolts Predictable clamping performance for production environments Built to the requirements of DIN 6316, this clamping component delivers consistent clamping force across repeated cycles, reducing set‑up variability. The standard ensures that the part interfaces correctly with industry‑standard fixtures, which streamlines tool changes and shortens machine down‑time. The measured geometry and finish contribute to stable seating in the slot, which supports repeatable machining tolerances and protects workpiece alignment over longer runs. Flexible fit for common T‑slot sizes reduces tooling complexity Designed for T‑slot widths 24 mm and 28 mm, the component removes the need for multiple bespoke clamps for different tables. The dual‑slot compatibility and M24 thread suitability mean existing clamping bolts and accessories can be re‑used, lowering inventory complexity. The adaptable fit is particularly beneficial for mixed‑workshop environments where machines from different eras or manufacturers coexist. Straightforward integration and clear installation benefits With a usable length of 200 mm, the clamping element is suitable for a wide range of fixtures and workpiece dimensions while keeping the installation simple. The plain, engineered geometry allows quick placement in the slot and standard torque application of M24 hardware, supporting rapid set‑up. Clear dimensional conformity aids maintenance planning and spare‑part management, helping to maintain uptime and predictable production throughput. For standardised and reliable clamping choose the AMF clamping iron and contact Metav Werkzeuge for specification advice and fast supply direct from Emmerich Technical data Article number: 4000833063NW Label: Spanneisen DIN 6316 f.T-Nut 24+28mm L.200mm AMF Type: Clamping iron Standard: DIN 6316 Manufacturer: AMF Facts T‑slot compatibility: 24 + 28 mm Width: 26 mm Total length: 200 mm Fits thread: M24 Axite enrichment: Addition: A: 35; B2: 70; B3: 35; C: 25; E1: 76,5; E2: 60 Special features Packaging unit: 1 UID: 4000833063NW FAQ Which standard does this clamping component meet? The clamping iron conforms to DIN 6316, ensuring standardised dimensions and compatibility for table clamping applications. Which T‑slot sizes are supported? The component is designed for T‑slot 24 and 28 mm, enabling use across common machine tables without special adapters. What thread size is required for bolts? The part is compatible with M24 clamping bolts, matching typical heavy‑duty clamping hardware. What is the usable length of the clamping element? The total length is 200 mm, offering a practical clamping span for a broad range of workpieces. Is this component suitable for mixed workshop setups? Yes, the dual T‑slot compatibility and standard thread interface make the clamping iron well suited to mixed environments where flexibility is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Clamping Screw M10x1.5P, Heat-Treated Steel - Vertex
Take advantage of the combination of robust heat-treated steel, a secure M10 x 1.5 thread and an extended 200 mm length for reliable clamping and reduced rework; order directly via Metav Werkzeuge or consult the team for application advice. Clamping screw 1338M — Vertex clamping screw with M10 x 1.5 thread and 200 mm length A durable clamping screw engineered for secure fixtures and routine use in jigs, fixturing systems and workshop assemblies. Heat-treated steel core for long service life M10 x 1.5 threaded shaft for secure fixing 200 mm length for extended reach Precision-manufactured Vertex component Dependable clamping performance for production environments The heat-treated steel construction delivers high fatigue resistance and stable clamping force over repeated cycles, which helps minimise slippage and component movement during machining or assembly. The M10 x 1.5 thread provides a fine-pitch engagement that increases clamping accuracy and reduces the risk of loosening under vibration. This combination translates into fewer setup repeats and a steadier production flow, supporting throughput goals and consistent part quality. Compatibility and straightforward integration with existing fixtures Designed as a standard clamping element, the component fits common metric threaded holes and adaptors used across workshop and industrial fixtures. The 200 mm length gives extra reach for deeper jigs or stacked clamping arrangements without compromising lever control. Thread specification and dimensional consistency support predictable torque behaviour, simplifying torque setting and tool selection for assembly stations and CNC fixturing. Durability that cuts downtime and maintenance Manufactured to Vertex standards, the fastener resists wear and maintains thread integrity under frequent tightening cycles, reducing replacements and maintenance interventions. The modest mass and compact profile ensure quick handling at the bench or on automated lines, while material processing contributes to stable mechanical properties over time. The result is improved uptime and less unplanned stoppage for tool replacement or rework. Choose the Vertex clamping screw 1338M for dependable fixture performance — contact Metav Werkzeuge in Emmerich for tailored technical advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 1338M GTIN: 4061905087073 Manufacturer: Vertex Facts Length: 200 mm Weight: 0.1 kg Thread: M10 x 1.5 Special features Material: heat-treated steel ECLASS: 21022190 Brand: Vertex FAQ Are these screws suitable for heavy-duty clamping? The Vertex clamping screw (SKU 1338M) is made from heat-treated steel and is intended for robust clamping duties in many workshop and light industrial applications. What does the M10 x 1.5 thread mean for assembly? M10 x 1.5 indicates a metric thread with a 10 mm nominal diameter and 1.5 mm pitch; the specification supports fine engagement and predictable torque behaviour for fixture assemblies. Is the length of 200 mm measured overall or from the thread base? The 200 mm length refers to the overall length of the clamping screw as supplied in the Vertex specification. How does the material choice affect longevity? Heat-treated steel increases wear resistance and fatigue strength, extending service life and reducing the frequency of replacements for clamping components. Can these clamping screws be used with standard metric nuts and tapped holes? Yes, the thread form and dimensions conform to common metric standards and are compatible with standard M10 fittings and tapped holes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Clamping Screw M12x1.75 Thread, Heat-Treated Steel - Vertex
Taking into account robust construction, precise thread specification and convenient length, this clamping solution promotes consistent fixture performance and reduced downtime; order the item directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw 1348M — heat-treated steel, M12x1.75 thread (Vertex) A durable clamping screw engineered for secure fastening in jigs, fixtures and general workshop clamping tasks. Heat-treated steel construction Thread M12x1.75 for secure engagement 200 mm overall length for deep reach Lightweight at 0.15 kg for easy handling Engineered for dependable, repeatable clamping The robust, heat-treated steel body delivers high fatigue resistance and sustained clamping force, ensuring fixtures remain stable during machining and assembly. With a defined M12x1.75 thread profile, the component provides reliable engagement with standard nuts and threaded holes, reducing the risk of loosening under vibration. This mechanical predictability translates into fewer interruptions on the shop floor and a measurable improvement in cycle-time reliability. Designed for versatile workshop and fixture use A 200 mm overall length offers extended reach for deep-set clamps and bespoke jig arrangements, while the modest mass of 0.15 kg keeps handling comfortable during frequent set-ups. The metric thread compatibility supports integration with common clamping plates and threaded bosses, so retrofitting into existing systems is straightforward. The simple geometry makes inspection and maintenance fast, lowering the time needed for pre-shift checks and tool changes. Practical benefits explained for non-specialists The standardised M12x1.75 designation indicates thread diameter and pitch, a specification that ensures interchangeability across suppliers and components. Choosing a screw manufactured from heat-treated steel means the part has undergone controlled hardening to improve strength without becoming brittle; this balance is essential where repeat tightening and release are required. For operations seeking consistent clamping without frequent replacement, this component represents a pragmatic balance of durability and serviceability. Quality assurance and supply confidence Produced by Vertex and identified as SKU 1348M, the component is suitable for use in demanding workshop environments where reliability matters. Sourcing via Metav Werkzeuge provides the added assurance of a European quality filter and prompt logistic support from Emmerich, backed by decades of distribution experience. This supply chain reliability reduces procurement risk and contributes to predictable production scheduling. Choose the Vertex clamping screw for proven durability and compatibility — contact Metav Werkzeuge for application guidance and secure procurement from our Emmerich stock Technical Data SKU: 1348M GTIN: 4061905090240 Manufacturer: Vertex Measurements Length: 200 mm Weight: 0.15 kg Thread: M12x1.75P Materials & Features Heat-treated steel Eclass: 21022190 Suitable for general clamping applications FAQ What materials is this clamping screw made from? The clamping screw is manufactured from heat-treated steel, providing enhanced strength and wear resistance for industrial clamping tasks. Which thread specification does the component use? The product features an M12x1.75 thread, a common metric pitch that ensures compatibility with standard nuts and threaded fixtures. Is the length suitable for deep clamping setups? With a 200 mm overall length, the screw is designed to reach into deeper jigs and fixtures where standard fasteners are too short. Who manufactures this clamping screw and how is it identified? This component is produced by Vertex and sold under SKU 1348M, facilitating traceability and consistent quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Clamping Screw M16x2P Heat-Treated Steel, 0.25kg - Vertex
Combine the heat-treated steel construction with a M16 x 2 mm precision thread and a 200 mm length for dependable deep clamping and consistent fixture performance; order the clamping screw directly via Metav Werkzeuge or consult our advisors if further specification is required. Clamping screw 1358M – M16 x 2 mm thread, 200 mm length (Vertex) A Clamping screw 1358M engineered for secure fixture and deep clamping in machine vices and production jigs. Heat-treated steel construction M16 x 2 mm precision thread 200 mm overall length for deep clamping Suitable for machine vices and fixtures Reliable clamping that reduces downtime The robust design of this fastening element delivers consistent clamping force, minimising rework and machine stoppages. The M16 x 2 mm metric thread provides a fine pitch that allows accurate axial adjustment with predictable torque behaviour; this results in repeatable setups and fewer adjustments between jobs. The heat-treated steel body increases resistance to wear and deformation under load, which contributes to a longer service life compared with untreated fasteners. For production environments where repeatability and uptime are priorities, the combination of fine-thread geometry and a hardened component yields measurable improvements in fixture stability and process reliability. Deep reach for versatile fixturing A 200 mm overall length enables secure engagement in deeper vises and bespoke fixtures without the need for added extensions or adapters. The extended reach supports clamping of larger or irregularly shaped workpieces while keeping the clamping point accessible and stable. Using a single long shank fastener reduces the number of intermediate parts, streamlines the setup process and improves operator ergonomics during repeated clamping cycles. The result is a cleaner workflow and faster part changes in both individual and batch production contexts, where minimising auxiliary components directly benefits cycle time. Durable performance and workshop suitability Manufactured to Vertex standards, this fastener is intended for demanding workshop and industrial applications where mechanical stress and frequent use are expected. The material choice and heat treatment enhance resistance to surface fatigue and maintain thread integrity under cyclical loading. Maintenance requirements are therefore reduced, supporting predictable inventories and less frequent replacement. Delivered as a compact, easy-to-handle component, the part integrates with standard metric tooling and clamps and aligns with common workshop practices for installation and inspection, facilitating quick adoption into established processes. Contact Metav Werkzeuge in Emmerich for tailored advice on Vertex clamping solutions and to arrange reliable European delivery Technical data SKU: 1358M GTIN: 4061905088827 Manufacturer: Vertex Material: Heat-treated steel Thread: M16 x 2 mm Length: 200 mm Weight: 0.25 kg Facts Length: 200 mm Weight: 0.25 kg Thread pitch: 2 mm Special features Clamping screw design Heat-treated for wear resistance Metric fine thread for precise adjustment Suitable for fixtures and machine vices FAQ What material is the clamping screw made from? The clamping screw 1358M is manufactured from heat-treated steel to provide enhanced wear resistance and dimensional stability under load. What is the thread specification for this fastener? The fastener uses a metric M16 x 2 mm thread for fine-pitch adjustment and predictable torque response. Can this screw be used for deep clamping applications? Yes, the 200 mm overall length of the 1358M makes it suitable for deep clamping in vises and specialised fixtures. Is the product suitable for repeated industrial use? Vertex designed this clamping screw for workshop and industrial environments; the heat-treated construction supports repeated cycles with reduced wear. What are the key dimensions and weight of the part? The part is 200 mm long and weighs 0.25 kg; thread pitch is 2 mm (metric fine thread). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Clamping Screw M20x2.5 Thread, Heat-Treated Steel - Vertex
Take advantage of heat-treated steel strength and a metric M20 × 2.5 thread for reliable, repeatable clamping in demanding production environments; order the clamping solution directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw 1378M — M20 × 2.5 thread, 200 mm, Vertex The clamping screw 1378M is a heavy-duty clamping bolt designed for secure workholding and repeatable positioning in industrial fixtures and jigs. Heat-treated steel construction Metric M20 × 2.5 thread 200 mm overall length Designed for heavy-duty clamping Consistent clamping force for repeatable setups The heat treatment of the main component provides enhanced strength and wear resistance, which results in consistent clamping behaviour over many cycles. With a metric M20 × 2.5 thread and a 200 mm overall length, the component delivers predictable engagement and allows concise positioning in modular fixtures. This mechanical reliability reduces setup variability and contributes to shorter adjustment times in series production, improving throughput without sacrificing accuracy. Robust material choice that reduces maintenance Constructed from heat-treated steel, the clamping bolt offers a favourable balance between toughness and dimensional stability. The material choice minimises plastic deformation under load and extends service life compared with untreated fasteners. For maintenance planning, the component’s predictable durability simplifies spare-part stocking and reduces unplanned downtime in workshops and on the production floor, supporting efficient asset management. Simple specification for broad integration The clear specification—M20 × 2.5 thread, 200 mm length and an approximate mass of 0.4 kg—facilitates selection and integration into existing assemblies and workholding plates. The straightforward geometry supports common tooling standards, enabling fast replacement and interchangeability in clamping systems. Where process reliability is essential, this mechanical solution helps to standardise fixturing procedures and enhances overall process control. Choose Vertex quality for dependable workholding — contact Metav Werkzeuge in Emmerich for procurement and technical matching to existing fixtures. Technical data SKU: 1378M GTIN: 4061905088834 Manufacturer: Vertex ECLASS: 21022190 Numbers / Core technical data Length: 200 mm Weight: 0.4 kg Thread: M20 x 2.5 Special features Material: Heat-treated steel Brand: Vertex Intended use: Clamping / workholding component FAQ What is the thread specification of this clamping component? The clamping screw 1378M from Vertex is supplied with a metric M20 × 2.5 thread. What material is used for the clamping bolt? The 1378M is manufactured from heat-treated steel, chosen for strength and dimensional stability. Is the length suitable for standard fixtures? The overall length of 200 mm is compatible with many common jigs and fixture plates, allowing straightforward integration. How heavy is the clamping bolt? The item has an approximate mass of 0.4 kg, which aids in handling and planning for inventory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Clamping Screw M8x1.25 Heat-Treated Steel - Vertex
Take advantage of the combination of durable heat-treated steel, a standard M8 × 1.25 metric thread and a long 200 mm reach for reliable fixture clamping; order the clamping screws directly via Metav Werkzeuge or ask our consultants if needed. Clamping Screws 1328M — M8 × 1.25 thread, 200 mm, Vertex The Clamping Screws 1328M are robust fastening elements engineered for secure clamping in workshop fixtures, jigs and general industrial clamping tasks Heat-treated steel construction M8 × 1.25 metric thread 200 mm length for deep clamping Compact weight of 0.07 kg per piece Engineered for dependable fixture clamping The long shank and standard metric thread deliver precise axial adjustment for secure holding in assemblies where repeatable positioning matters. With an extended 200 mm length, the component reaches into deeper fixture beds or through thicker workpieces while the M8 × 1.25 thread provides a balance between coarse strength and fine adjustment. This combination reduces the need for auxiliary spacers and supports consistent clamping force across repetitive setups, aiding production reliability and measurable process stability. Durability through controlled heat treatment Made from heat-treated steel, the fastener is designed to withstand the mechanical stresses typical of industrial clamping operations. The thermal treatment increases tensile strength and wear resistance, which translates into longer in-service intervals and fewer replacements. Supplied by Vertex, the component matches workshop expectations for robust materials and predictable mechanical behaviour, supporting a maintenance strategy that prioritises uptime and dependable fixture performance. Designed for versatile workshop integration The metric M8 × 1.25 thread is a widely used standard, enabling straightforward replacement and compatibility with common nuts, threaded inserts and tapped holes. The extended 200 mm length suits a variety of fixtures and jigs, from machining set-ups to assembly benches, allowing integration without major design changes. The relatively low mass of 0.07 kg per item keeps handling and fixturing simple while maintaining the mechanical presence required for effective clamping. Low-maintenance handling and predictable spare-part supply The straightforward material and standard thread geometry mean inspection and replacement are simple tasks within routine workshop maintenance. Standardised specifications ease procurement and stock management, reducing downtime caused by non-matching fasteners. The component’s clear technical specification supports inventory control and makes it easy to identify matching replacements, ensuring that fixtures remain serviceable with minimal administrative effort. Contact Metav Werkzeuge in Emmerich for stock availability and technical advice, quoting SKU 1328M to ensure the correct clamping solution for the application Technical data SKU: 1328M GTIN: 4061905093265 ECLASS: 21022190 Manufacturer: Vertex Core data Length: 200 mm Thread: M8 × 1.25 Weight: 0.07 kg Materials & features Material: Heat-treated steel Application: Clamping fixtures and jigs Design: Long shank for deep reach FAQ What is the exact thread specification of these clamping screws? The clamping screws feature an M8 × 1.25 metric thread, specified for the Clamping Screws 1328M by Vertex. What is the overall length and mass of the fastening element? The fastener is 200 mm long and has a weight of approximately 0.07 kg per piece. What material are the screws made from and why is that relevant? They are manufactured from heat-treated steel, which provides improved tensile strength and wear resistance for demanding clamping tasks. Are these screws suitable for standard workshop fixtures and jigs? Yes, the M8 × 1.25 metric thread and 200 mm length make the screws suitable for a wide range of fixtures and jigs commonly used in workshops. How should the part be specified when ordering replacements? Specify the Vertex Clamping Screws 1328M and include the SKU 1328M and GTIN 4061905093265 to ensure an exact match. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Clamping Wedge For T-Slot 20/22mm, DIN 6314 - AMF
Take advantage of the combination of standardised design and straightforward compatibility: a compact clamp built to DIN 6314 for secure fixation in T‑slots 20 and 22 mm, with a 200 mm length that suits many fixture arrangements. Order directly via Metav Werkzeuge or request specialist advice if application specifics require clarification. Clamping Bar DIN 6314 (AMF) – for T‑slot 20 + 22 mm, 200 mm A Clamping Bar DIN 6314 engineered to secure workpieces in machine‑table T‑slots 20 and 22 mm, suitable for fixtures using M20 or M22 fittings. Conforms to DIN 6314 standard Fits T‑slots 20 and 22 mm Length 200 mm for flexible setups Compatible with M20 and M22 fittings Secure clamping engineered for machine tables The clamping bar follows the DIN 6314 specification, ensuring dimensional compatibility with established fixture systems and repeatable performance across setups. Use in T‑slots of both 20 mm and 22 mm reduces the need for adapters and supports consistent positioning. This standard conformity means fewer alignment checks and a predictable interface with common clamping elements, contributing to shorter set‑up times and improved process reliability. Versatile integration with existing fixtures With an overall length of 200 mm and a working width of 22 mm, the component integrates cleanly into modular clamping arrangements. Compatibility with M20 and M22 fittings allows the bar to accept widely used stud and nut sizes, making it simple to combine with established clamping hardware. The compact dimensions favour cramped or multi‑station tables where space optimisation and flexible placement are essential for efficient throughput. Practical benefits for everyday workshop use Selecting a standardised clamping solution reduces complexity in inventory and speeds decision‑making during job changes. The compatibility with common T‑slot sizes and thread standards supports cross‑machine use, limiting the number of unique parts required. Fewer specialised components mean less downtime for replacements and a more resilient workshop supply chain, which is particularly valuable in small to medium‑sized fabrication environments. Technical clarity for procurement and planning Specifying a component to a recognised norm simplifies procurement checks and quality assurance procedures. The standard reference and clear dimensional data provide a verifiable basis for ordering and for cross‑referencing with existing fixtures and tooling. Where exact machine table tolerances or fixture geometries must be checked, the normative designation facilitates direct comparison with technical drawings and supplier catalogues. For reliable fixture integration with the AMF clamping bar, contact Metav Werkzeuge for fast supply and expert product guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833008NW Label: Spanneisen DIN 6314 f.T‑Nut 20+22mm L.200mm AMF Product type: Clamping bar Manufacturer: AMF Facts Standard: DIN 6314 T‑slot: 20 + 22 Width: 22 mm Overall length: 200 mm Suitable for: M20, M22 Packaging unit: 1 Special features Conforms to machine‑table clamping norms Simple integration into standard fixtures Axite enrichment: Addition: A: 30; B2: 60; B3: 22; E1: 30; E2: 80 FAQ What standard does this clamping bar comply with? The clamping bar is specified to DIN 6314, providing a recognised norm for dimensions and interface with machine‑table systems. Which T‑slot sizes are supported? This item supports T‑slots 20 mm and 22 mm, enabling direct use in tables designed for either slot profile. Is the bar suitable for M20 and M22 fastenings? Yes, the component is suitable for fittings and studs in M20 and M22 sizes. What is the overall length and width of the clamp? The bar has an overall length of 200 mm and a working width of 22 mm, suited to compact and modular setups. Does the product include mounting hardware? The product is supplied as a single unit (packaging unit: 1); separate mounting elements are not listed in the specification Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Closure Clamp With Extended Special Arm, 20kN Push / 25kN Hold Zinc-Plated, Vertical Foot - Kukamet
Take advantage of the combination of galvanised construction, an extended 200 mm special arm and a maximum 25 kN holding force for reliable fixture clamping in production environments. Order the clamp directly via Metav Werkzeuge or contact our consultants for technical advice. Verschlussspanner 333 — Vertical-foot lever clamp with 200 mm extended arm (Kukamet) The Verschlussspanner 333 is a vertical-foot lever clamp engineered for secure, high-force clamping in jigs, fixtures and assembly operations. Galvanised steel construction for durability 200 mm extended special arm for increased reach Vertical-foot mounting for robust fixture integration 25 kN maximum holding force for reliable retention Consistent high-force performance for secure fixtures The primary benefit of this lever clamp is its high mechanical output: a maximum clamping force of 20,000 N and a holding force of 25,000 N. These values translate into secure retention for parts during welding, assembly or inspection, reducing rework and increasing throughput. The mechanical design converts operator input into predictable clamping pressure, which is crucial where repeatability is required. The solid force figures are especially relevant for industrial workshops and small-batch production where consistent part positioning prevents rejects and saves operating time. Durable, corrosion-resistant design with extended reach Constructed from galvanised steel, the clamp resists corrosion in workshop environments and maintains surface integrity under frequent use. The extended 200 mm special arm provides additional reach and clearance, making it easier to clamp larger or awkwardly positioned parts without compromising accessibility. At a weight of 1.45 kg, the component balances robustness with manageable mass for mounting in benches or fixtures. The galvanised finish also simplifies maintenance by reducing the need for immediate refinishing in damp or exposed conditions. Flexible mounting and practical application in production Designed for vertical-foot mounting, the clamp integrates into tooling plates and fixture bases with straightforward fastening. The 200 mm thread length offers flexibility for fine adjustment and secure anchoring through a range of plate thicknesses, while the integrated hook increases functionality for certain closure applications. Typical uses include jigs for machining, assembly stations and holding points in measuring fixtures. The clamp’s standardised interface supports quick replacement within existing setups, supporting lean maintenance practices and minimising downtime. For robust, corrosion-resistant clamping from Kukamet, contact Metav Werkzeuge for product availability and application guidance — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the Verschlussspanner 333 and its suitability for specific fixtures Technical data Article number: 333-5-L-M16 GTIN/EAN: 8680731500219 SKU: 333-5-L-M16 Facts Weight: 1.45 kg Arm length: 200 mm Thread length: 200 mm Maximum clamping force: 20,000 N Maximum holding force: 25,000 N Special features Material: galvanised steel Mounting: vertical foot With hook Extended special arm Category: Spanner eClass: 21041718 ETIM: EC011973 FAQ What clamping and holding forces does the clamp provide? The Verschlussspanner 333 delivers a maximum clamping force of 20,000 N and a maximum holding force of 25,000 N, giving predictable retention for industrial fixtures. Is the clamp suitable for use in humid or workshop environments? Yes. The galvanised steel construction of the Kukamet Verschlussspanner 333 provides corrosion resistance appropriate for typical workshop and production conditions. How is the clamp mounted and adjusted in a fixture? Mounting is via a vertical foot arrangement; the clamp features a 200 mm thread length for secure anchoring and fine adjustment in tooling plates. Which industries or tasks is this lever clamp suited to? The clamp is intended for jig and fixture applications in assembly, machining, welding and inspection where a robust, repeatable closure is required. What is the ordering code for this model? Order as SKU 333-5-L-M16; GTIN/EAN 8680731500219 identifies this specific version. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Closure Clamp With Vertical Base, Extended Arm, 10000N Thrust, Zinc-Plated - Kukamet
Take advantage of a galvanised finish, a 200 mm extended special arm and high clamping/holding forces for reliable, repeatable fixture work. Order the clamp directly via Metav Werkzeuge or consult the Metav team for technical advice and fast delivery. Toggle clamp 333 – Vertical‑foot locking clamp with 200 mm extended arm (Kukamet) A Toggle clamp 333 is a vertical‑foot locking clamp engineered for secure holding in industrial fixtures and jigs, combining a galvanised finish with an integrated hook for rapid fastening. Galvanised steel for corrosion resistance 200 mm extended special arm Vertical foot for secure mounting 10,000 N clamping, 12,000 N holding force Durable construction that reduces downtime The clamp is built from galvanised steel and designed for heavy workshop use, offering corrosion resistance where repeated cycles and mixed environments are encountered. At approximately 0.95 kg, the unit stays compact without compromising stability, so it integrates easily into fixtures and portable jigs. The galvanised surface reduces maintenance intervals and protects moving parts from premature wear, which helps to keep production lines running with fewer interruptions. High clamping and holding forces for secure processes With a maximum clamping force of 10,000 N and a holding capacity of 12,000 N, this locking device delivers the retention needed for demanding assembly and machining operations. The 200 mm thread length allows for reliable adjustment and precise positioning of the clamping arm, ensuring consistent pressure across repeated cycles. These measurable values translate into improved process reliability and lower reject rates when parts must remain immobile under cutting, welding or assembly loads. Quick integration and ergonomic fixture design The vertical‑foot mounting ensures firm attachment to workbenches or fixture plates while the 200 mm extended special arm provides the clearance necessary for larger or awkwardly shaped workpieces. An integrated hook supports rapid engagement and simple part handling, speeding up changeovers. The compact footprint and straightforward mounting concept make this clamp suitable for bespoke jigs, modular fixtures and production lines where space and cycle time are critical. The product is supplied under SKU 333-4-L-M10 and fits standard workshop mounting patterns. For robust clamping performance and rapid supply of the Kukamet 333 toggle clamp, contact Metav Werkzeuge in Emmerich for stock information and expert technical guidance at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: 333-4-L-M10 GTIN: 8682843520987 ECLASS: 21041718 ETIM: EC011973 Core specifications Clamping force max: 10,000 N Holding force max: 12,000 N Arm length: 200 mm Thread length: 200 mm Weight: 0.95 kg Special features Material: Galvanised Mounting: Vertical foot With hook: Yes Special arm: Extended special arm Category: Spanner FAQ How much clamping power does the clamp provide? The Kukamet 333 toggle clamp provides a clamping force of 10,000 N and a holding force of 12,000 N, giving strong retention for industrial fixturing tasks. What mounting arrangement does this clamp use? The clamp is designed with a vertical foot mounting that allows secure fastening to bench tops and fixture plates while keeping the clamp stable under load. Is the finish suitable for humid or mixed environments? Yes, the galvanised surface offers corrosion resistance suitable for workshops where moisture or variable conditions are present. What advantages does the extended arm bring? The 200 mm extended special arm increases reach and clearance, simplifying clamping of larger or irregular workpieces and improving accessibility during setup. Which model reference should be used when ordering or specifying? Refer to Kukamet model 333 or SKU 333-4-L-M10 when ordering or specifying the clamp for fixtures and jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Dowel Screw M12x200 Hardened Grade 10.9 DIN 6379 - AMF
Take advantage of a high-strength fastening solution that combines DIN 6379 conformity, an M12 threaded connection and a heat-treated property class 10.9 for reliable performance in industrial assemblies; order the stud bolt directly via Metav Werkzeuge or consult our specialists for specification support. AMF stud bolt DIN 6379 M12 x 200 mm, heat-treated to 10.9 A AMF stud bolt DIN 6379 M12 x 200 mm engineered for secure, high-load fastening in machine construction, fixtures and maintenance applications. *Stud bolt to DIN 6379 specification *Heat-treated to property class 10.9 *M12 threaded connection, robust fit *Overall length 200 mm, thread length 122 mm Consistent high tensile performance for demanding assemblies The stud provides high tensile strength through targeted heat treatment to property class 10.9, which significantly increases load-bearing capacity compared with lower classes. This results in reduced risk of fastener failure under cyclical or shear loads and contributes to longer service intervals. The combination of standard conformity and enhanced strength supports safe assembly designs and helps maintain production continuity where component integrity is critical. Defined dimensions and standard conformity that simplify planning Conformity to DIN 6379 ensures interchangeability and predictable fitment in standardised components. With an M12 thread and an overall length of 200 mm, the fastener suits applications requiring extended engagement length. The specified thread length b: 122 mm gives clarity for design calculations and enables correct selection of mating nuts and washers. These measurable values simplify ordering, inventory management and engineering documentation. Practical advantages in procurement and workshop workflows Supplied in single-unit packaging and identified by SKU 4000833263NW, the fastener supports targeted stocking for repair and assembly tasks. The clear specification reduces query time during procurement and the robust mechanical properties minimise rework due to inadequate hardware. Where reliability and traceability are priorities, the fastener represents a practical option for production workshops and maintenance teams that value predictable performance and easy replacement. For secure, high-strength fastening solutions and procurement assistance for AMF stud bolts, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and supply options. Technical data Article number: 4000833263NW Brand: AMF Product type: Stud bolt Standard: DIN 6379 Facts Thread: M12 Overall length: 200 mm Width across flats: 15 mm Thread length (b): 122 mm Special features Heat-treated to property class 10.9 Single unit packaging Industrial fastening for machine construction and fixtures FAQ What strength class does this stud bolt have? The stud bolt is heat-treated to property class 10.9, providing high tensile capacity suitable for demanding fastening tasks. Is the fastener compliant with recognised standards? Yes, the fastener conforms to DIN 6379, ensuring standardised dimensions and interchangeability in industrial assemblies. What are the critical dimensions for design integration? Key dimensions are M12 thread, overall length 200 mm and a thread length b: 122 mm, which should be used when specifying mating components. Can this stud bolt be used with common M12 nuts and washers? Compatibility with standard M12 nuts and washers is expected when matched to the stud’s thread specification and property class. How is the product identified for ordering or stock? The item is listed under SKU 4000833263NW, facilitating clear ordering and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar 14mm Slot For M12 M14 Clamping Screw, DIN 6315B - AMF
Take advantage of the combination of reliable clamping geometry, compatibility with standard clamping screws and straightforward integration into existing fixtures for uninterrupted workshop operation. Order the fork clamp bar directly via Metav Werkzeuge or consult the technical team for application-specific guidance. Fork clamp bar DIN 6315B, slot 14 mm, L 200 mm – AMF The Fork clamp bar DIN 6315B is a fork-style clamping element designed for fixture and workholding applications in metalworking and general workshop environments, compatible with standard M12 and M14 clamping screws. Fork clamp bar, DIN 6315B standard Slot width 14 mm for positive engagement Overall length 200 mm, compact installation Compatible with clamping screws M12 and M14 Secure clamping with standardised geometry The fork-style clamping element provides a repeatable clamping interface based on the DIN 6315B standard, ensuring predictable positioning and force transmission within fixtures. The 14 mm slot offers secure engagement with corresponding clamping screws, reducing lateral play and enabling stable clamping even under intermittent load changes. This standardised form factor simplifies part selection for production cells and jigs, lowering engineering time and increasing process reliability. Compact length that supports diverse fixtures With a 200 mm overall length, the component fits within space-restricted setups while delivering sufficient contact surface for reliable clamping. The compact dimensions facilitate use in modular clamping systems, specialised fixtures and retrofit operations where a full-length bar would be impractical. The short profile also aids in rapid handling during assembly operations and minimises interference with adjacent tooling. Engineered for compatibility with common clamping hardware Specified for use with M12 and M14 clamping screws, the fork clamp bar integrates seamlessly into prevailing workshop inventories and clamping architectures. Compatibility with these thread sizes means the element can be combined with a wide range of screws, studs and nuts without the need for bespoke fasteners. This interoperability reduces procurement complexity and supports quick replacement during maintenance cycles. Robust application focus and material expectations Designed as a clamping accessory for industrial use, the component exhibits a sturdy fork form that resists deformation under typical clamping forces. The geometry concentrates clamping loads through the slot and fork arms, which helps maintain alignment and reduces the risk of slippage. For applications requiring consistent hold-down pressure in machining or assembly, the fork clamp bar offers a pragmatic balance between mechanical simplicity and functional resilience. Integration advice and practical benefits The standardised profile is suitable for repeatable production setups and one-off jigs alike; the element can be mounted directly to fixture plates or incorporated into clamp arms. The clear specification of slot width and length allows planners to calculate engagement depth and leverage in advance, which supports cycle-time optimisation and predictable tool life. Traceable standards and simple interchangeability contribute to lower total cost of ownership across workshop fleets. For application advice or to arrange suitable delivery from stock, contact Metav Werkzeuge; technical consultants can advise on compatibility with existing clamping hardware and fixture layouts Technical Data Article number: 4000833025NW UID: 4000833025NW Brand: AMF Product type: Clamping bar (fork version) Facts Slot width: 14 mm Overall length: 200 mm Suitable for: M12, M14 Packaging unit: 1 Standard: DIN 6315B Additional values: A: 25; B2: 38; B3: 12; B4: 6 Special features Fork version (Gabelausführung) Designed for use with clamping screw M12 and M14 Compact design for restricted installation spaces FAQ What is the recommended screw size for this fork clamp bar? The fork clamp bar is specified for use with clamping screws M12 and M14, allowing integration with common workshop fastenings. Is the fork clamp bar compliant with any standard? Yes, the component follows the DIN 6315B standard, providing standardised geometry for predictable fixture behaviour. Can this clamping element be used in confined fixture spaces? Its 200 mm overall length and compact fork design make the element suitable for installations with limited clearance where conventional long bars would not fit. How does the 14 mm slot affect clamping performance? The 14 mm slot ensures positive engagement with matching screws, reducing lateral play and improving stability during machining or assembly processes. What should be considered when replacing an existing clamping bar? Attention to slot width, overall length and compatible screw size is essential; the fork clamp bar offers direct interchangeability where DIN 6315B geometry and M12/M14 hardware are already in use. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot 18mm For M16 M18 Screw - AMF
Take advantage of the fork-style geometry, slot width 18 mm and 200 mm length to achieve stable, repeatable clamping with standard M16/M18 screws; the compact form factor supports efficient fixture layouts and faster setup. Order the component directly via Metav Werkzeuge or ask the consultants for application guidance. Fork clamping bar No. 6315GN – fork-style clamping bar with 18 mm slot, 200 mm length (AMF) Fork clamping bar No. 6315GN is a fork‑type clamping component designed for integration into standard clamping fixtures and supports secure engagement with M16 and M18 clamping screws Fork-style design for secure engagement Slot width 18 mm for standard clamping bars Length 200 mm for versatile workpieces Compatible with M16 and M18 clamping screws Consistent, repeatable grip for precision clamping The fork geometry provides a defined contact interface that reduces lateral movement and improves repeatability during machining and assembly tasks. With a slot width of 18 mm and an overall length of 200 mm, the component aligns with common clamping profiles, enabling reliable force transfer from the clamping screw to the workpiece. This results in fewer re‑set cycles and more consistent part quality, which is particularly beneficial in small‑batch production or jigs where positional accuracy matters. Faster set-up and easier fixture integration Standardised dimensions make the component straightforward to incorporate into existing fixture concepts, cutting time spent on adaptations. The fork design accepts M16 and M18 clamping screws, so conventional threaded clamping elements can be used without custom interfaces. This compatibility reduces procurement complexity and shortens assembly time, allowing shops to maintain throughput while simplifying the bill of materials for clamping systems. The clear geometry also simplifies CNC programming and manual positioning. Robust solution for industrial clamping applications Designed for repeatable use in workshop and production environments, the fork clamping bar supports typical clamping workflows and machine table arrangements. The open fork allows quick engagement with clamping screws and provides tactile feedback during tightening, which helps operators verify secure seating without extra gauges. Supplied as a single unit, the component is suited to both retrofit projects and new fixture builds where compact, dependable clamping elements are required. Contact Metav Werkzeuge for tailored advice on fixture integration or to secure the AMF fork clamping bar for the next production run; Metav Werkzeuge’s specialists in Emmerich provide practical support and reliable supply for precision clamping components Technical data Article number: 4000833040NW Product type: Clamping bar Brand: AMF Type designation: Fork version No. 6315GN Facts Slot width: 18 mm Length L1: 200 mm L2: 57 mm L3: 36 mm A: 30 B2: 50 B3: 28 Suitable for: M16, M18 Special features Fork-style execution For clamping screw M16, M18 Packaged unit: 1 Label: Gabelspanneisen No.6315GN Schlitz-B.18mm L.200mm FAQ Is the fork clamping bar compatible with M16 and M18 screws? Yes. The fork clamping bar No. 6315GN by AMF is specified for use with M16 and M18 clamping screws and is designed to accept those thread sizes directly. What are the slot and overall length dimensions? The component features a slot width of 18 mm and an overall usable length of 200 mm, dimensions that suit standard clamping arrangements. Can the component be used in existing clamping fixtures? Yes. The fork geometry and standard measurements allow straightforward integration into many existing fixture systems without major modification. Is the fork clamping bar suitable for precision repeatability tasks? The defined fork contact and standardised geometry support repeatable seating and consistent clamping force, making it suitable for precision clamping applications and repeatable setups. What is the article number for ordering? The article number (SKU) is 4000833040NW for the AMF fork clamping bar No. 6315GN Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot 26mm For M24 Clamping Screw DIN 6315B - AMF
Take advantage of the proven combination of standard conformity, robust fork design and precise slot sizing for dependable workholding; order directly via Metav Werkzeuge or consult the team for integration advice. AMF Fork Clamping Wedge DIN 6315B — 26 mm slot, 200 mm overall length The AMF fork clamping wedge is a DIN 6315B-compliant clamping element in fork design, intended for workholding with an M24 clamping screw in machine tables and fixture assemblies. Fork design for confined setups DIN 6315B standardised compatibility 26 mm slot for M24 clamping screw 200 mm overall length for deep reach Reliable standardisation for faster setup and fewer interruptions The wedge is manufactured to the DIN 6315B specification, which ensures interchangeability and predictable behaviour in standardised fixtures. With a fork design that provides access around pre-installed components, the component supports quicker installation and reduced machine downtime. The combination of standard conformity and a clear mechanical interface delivers a rational advantage for production environments that demand consistent clamping results and minimal adjustment time. Practical geometry that makes clamping both precise and accessible A 26 mm slot dimension accepts the specified M24 clamping screw without compromise, translating thread engagement into repeatable clamping force. The 200 mm overall length offers extended reach for deeper jaws or thicker setups while maintaining alignment under load. This geometry reduces the need for bespoke adaptors and simplifies fixture design, so planners and technicians benefit from efficient assembly and improved repeatability when building or reconfiguring workholding systems. Integration-ready design and specification details for procurement Measured values and compliance simplify procurement and inventory management: the part ships as a single unit and integrates directly into DIN-based systems. The listed enrichment data (Axite values) supports sorting and selection where multiple variants are used in a clamping portfolio. As a robust, standardised component, this clamping wedge helps maintain a consistent quality level across jobs and workshops, supporting both small-scale maintenance and industrial fixture supply chains. Contact Metav Werkzeuge for product availability and tailored integration advice on the AMF fork clamping wedge (SKU 4000833032NW) — expert assistance from Emmerich for seamless delivery to the workshop Technical data SKU: 4000833032NW Manufacturer: AMF Product type: Clamping wedge Type: Fork design Standard: DIN 6315B Facts Slot width: 26 mm Overall length: 200 mm Suitable for clamping screw: M24 Packaging unit: 1 Special features Fork execution for component access Compliance with DIN 6315B Axite enrichment: A: 40; B2: 66; B3: 20; B4: 10 FAQ What clamping screw fits this wedge? The AMF fork clamping wedge is designed for use with an M24 clamping screw and a 26 mm slot to ensure correct thread engagement and reliable clamping. Is the wedge compatible with standard DIN fixtures? Yes, the component conforms to DIN 6315B, allowing direct integration into standardised fixture systems and simplifying interchangeability. Can the wedge reach deeper jaws or thicker setups? The 200 mm overall length provides extended reach for deeper jaws and thicker workpieces while maintaining alignment under load. How is the part supplied for inventory and ordering? The item is supplied in a packaging unit of one; reference the SKU 4000833032NW when ordering to ensure the correct variant is delivered. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot Width 14mm For M12 M14 Clamping Screw - AMF
Benefit from robust fork-style clamping, precise fit and straightforward integration into existing fixtures for a dependable production flow; order the clamping bar directly via Metav Werkzeuge or consult our specialists if required. Fork-style clamping bar No. 6315GN – 14 mm slot, 200 mm length (AMF) A fork-style clamping bar No. 6315GN designed for machine-shop clamping operations and compatible with M12 and M14 clamping screws. Fork design for secure clamping 14 mm slot width 200 mm overall length Compatible with M12 and M14 screws Secure, repeatable clamping for routine setups The fork configuration delivers a stable contact surface that reduces lateral movement during clamping and supports repeatable workholding. The 14 mm slot provides a defined seating for clamp elements and is suitable for standard clamping hardware, while the 200 mm overall length keeps the workpiece engaged over a useful span. These measurable attributes translate into fewer setup iterations and a more predictable machining process, enhancing throughput without complex adjustments. Fast integration with standard clamping screws and fixtures Compatibility with M12 and M14 clamping screws enables quick assembly into existing fixture arrays and T-slot setups where those thread sizes are already in use. The fork-style geometry simplifies alignment of the clamping screw and mating components, which shortens assembly time and reduces the risk of misalignment. This component is intended to support efficient workflows by enabling straightforward retrofitting and faster changeovers in production and maintenance contexts. Practical considerations, serviceability and supplier trust Delivered as a single unit, the component is intended for direct installation into workshop clamp systems and requires only the corresponding M12 or M14 fastening hardware. For complex fixtures or unusual mounting conditions, technical clarification is available from Metav Werkzeuge to ensure correct selection and integration. Metav combines decades of precision experience, a broad product range and established supply reliability—backed by more than 48,000 satisfied customers—so buyers benefit from a dependable sourcing partner as well as the component itself. For tailored advice on implementing the AMF fork-style clamping bar No. 6315GN in a specific fixture or production line, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for fast, expert guidance and supply options. Technical data Article number: 4000833039NW Manufacturer: AMF Product: Clamping bar (fork design No. 6315GN) Packaging unit: 1 Label: Fork clamping bar No. 6315GN, slot 14 mm, length 200 mm, for clamping screws M12, M14, AMF Facts Slot width: 14 mm Overall length: 200 mm A: 25 mm B2: 40 mm B3: 24 mm L2: 47 mm L3: 30 mm Suitable for: M12, M14 Special features Fork design For use with clamping screws M12 and M14 Single-piece packaging (1) UID / SKU: 4000833039NW FAQ Which clamping screws are compatible? The fork-style clamping bar No. 6315GN (AMF) accepts M12 and M14 clamping screws; see SKU 4000833039NW for ordering. What are the key dimensions to check before fitting? The main dimensions are a 14 mm slot width and a 200 mm overall length for the AMF fork clamping bar No. 6315GN (SKU 4000833039NW). How is the component supplied? The AMF clamping bar No. 6315GN is supplied as a single unit (packaging unit 1). Is the fork clamping bar suitable for standard workshop fixtures? The fork geometry of the AMF No. 6315GN is intended for standard workshop clamping applications and integrates with fixtures designed for M12 or M14 screws. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamp Bar Slot Width 22mm For M20/M22 Clamping Screws DIN 6315B - AMF
Take advantage of the DIN 6315B fork design, the 22 mm engagement slot and compatibility with M20 / M22 clamping screws for dependable workshop fixturing; order the component directly via Metav Werkzeuge or consult the technical team if clarification is required. Fork clamping bar DIN 6315B — fork design, 22 mm slot, 200 mm length (AMF) A fork clamping bar DIN 6315B engineered for secure machine-table fixturing and modular clamping setups, compatible with common M20 and M22 clamping screws. Fork design to DIN 6315B standard Slot width 22 mm for secure engagement Length 200 mm for versatile clamping setups Compatible with M20 and M22 clamping screws Reliable standard compliance for precise fixture positioning Compliance with DIN 6315B ensures a defined geometry and repeatable engagement in serial or single-part clamping operations. The fork design locates and supports the clamping element, reducing lateral play and improving positional repeatability during tightening cycles. This standard conformity simplifies selection for production environments and supports consistent results across multiple fixturing stations, contributing to a more efficient machining workflow. Practical dimensions that reduce setup time The combination of a 22 mm engagement slot and 200 mm overall length provides a balance between reach and rigidity. The slot width matches common clamping screw heads, enabling seamless integration with M20 and M22 hardware and reducing the need for adapters. In practice, this compatibility accelerates fixture assembly and helps maintain constant clamp force distribution, which in turn reduces rework and machine idle time. Robust integration into workshop systems Designed as a modular element for clamping assemblies, the bar from AMF supports repeatable engagement and straightforward inventory management. The fork configuration pairs well with standard clamping screws, making it an economical choice for toolrooms and production lines that prioritise reliability and interchangeability. The clear specification and compact form support easy replacement and predictable behaviour in demanding everyday use. Order the AMF fork clamping bar via Metav Werkzeuge for dependable fixturing solutions — contact Metav Werkzeuge for technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: 4000833029NW Label: Gabelspanneisen DIN 6315B Schlitz-B.22mm L.200mm f.Spannschraube M20,M22 AMF Product type: Clamping bar Model: Fork design Manufacturer: AMF Dimensions / Core data Slot width: 22 mm Length: 200 mm Packaging unit: 1 Axite enrichment: Addition: A: 40; B2: 52; B3: 15; B4: 10 Features / Applications Compatible with clamping screws M20, M22 DIN 6315B fork configuration Suitable for modular clamping systems and machine-table fixturing FAQ What standard does the fork clamping bar follow? The fork clamping bar follows the DIN 6315B standard, ensuring standardised geometry and predictable fixturing behaviour. Which clamping screws are compatible with this bar? Compatibility is provided for M20 and M22 clamping screws, allowing direct use with common workshop hardware. What are the slot width and overall length? The slot width is 22 mm and the overall length is 200 mm, designed to balance engagement and rigidity. Is this component suitable for automated fixture systems? Yes; the defined fork geometry and standardised dimensions make this bar appropriate for automated or modular clamping setups where repeatability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Fork Clamping Jaw Slot 18mm For M16 M18 Clamping Screw DIN 6315B - AMF
Benefit from a compact fork-style clamping solution that combines DIN 6315B conformity with an 18 mm slot and a 200 mm overall length, providing reliable engagement with M16 and M18 clamping screws for straightforward fixture integration. Order the component directly via Metav Werkzeuge or consult the technical advisors for specification matching and rapid delivery. Fork clamping bar DIN 6315B (AMF) — fork design with 18 mm slot, 200 mm length The fork clamping bar DIN 6315B is a compact fork‑style clamping element engineered for secure workholding in fixture and jig assemblies, compatible with common M16 and M18 tension screws. DIN 6315B conformity for standardised fit 18 mm slot width for secure fork engagement 200 mm overall length for extended reach Suitable for M16 and M18 clamping screws Reliable, standardised clamping for fixture construction Conformity to DIN 6315B ensures interchangeability and predictable mounting dimensions across fixtures and machine tables. The fork execution gives positive engagement around clamping screws and studs, reducing the risk of lateral displacement during tightening. For production environments where repeatability matters, the standardised geometry simplifies spare‑part management and minimises machine downtime by enabling direct replacement without reworking existing setups. Faster set‑up and simpler integration into existing assemblies With an overall length of 200 mm, the component offers additional reach compared with shorter clamping bars, which helps when accessing recessed or hard‑to‑reach clamping points. The 18 mm slot aligns with common fork interfaces and accepts M16 and M18 tension screws for secure fastening. This compatibility reduces adapter requirements and shortens assembly time, resulting in measurable gains in workshop efficiency and throughput. Practical design that supports daily workshop demands The fork design keeps assembly and inspection straightforward: the open slot simplifies mounting and visual checks, while the compact form factor minimises interference with adjacent tooling. Supplied in single units, each item is easy to store and replace as part of a modular fixturing strategy. The clear specification facilitates procurement and inventory control, supporting a predictable supply chain for production and maintenance teams. Typical applications and who benefits most This clamping element is intended for fixture builders, machine shops and maintenance departments requiring standardised fork‑type clamping for jigs, welding fixtures or machining fixtures. The product is especially suitable where conventional clamping screws (M16, M18) are already in use, enabling quick retrofits and consistent clamping performance across multiple workstations. Contact Metav Werkzeuge for tailored fixturing advice or order the fork clamping bar through Metav Werkzeuge to ensure precise compatibility with existing assemblies and prompt dispatch from Emmerich Technical Data Article number: 4000833027NW SKU: 4000833027NW Product type: Clamping bar Type: Fork design Brand: AMF Data Slot width: 18 mm Overall length: 200 mm Suitable for clamping screws: M16, M18 Packaging unit: 1 Axite enrichment: A: 30; B2: 48; B3: 15; B4: 8 Special features Conforms to DIN 6315B Fork execution for positive engagement Designed for use with tension/clamping screws M16 and M18 FAQ What standard does the clamping bar follow and why is this important? The clamping bar follows DIN 6315B, which guarantees standardised mounting dimensions and compatibility with fixtures and accessories designed to the same norm. Can the fork clamping bar be used with both M16 and M18 screws? Yes, the fork configuration is dimensioned for secure engagement with M16 and M18 clamping screws, allowing flexible use across common workshop fittings. Is the 200 mm length suitable for recessed clamping points? The 200 mm overall length provides additional reach for recessed or hard‑to‑access clamping locations, improving accessibility without major fixture alterations. How is the component supplied and identified for reordering? The item is supplied as a single unit (packaging unit 1) and can be reordered using the article number 4000833027NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Halogen Lamp Dust-Protected, Light IP67 Arm IP65, 110/220/380/24V Cable 1.8m - Vertex
Take advantage of the combination of robust ingress protection, flexible positioning and multi-voltage operation for consistent inspection lighting in demanding workshop environments. Order the unit directly via Metav Werkzeuge or contact our consultants for specification advice. VHL-3001/2MR Halogen lamp — dust-protected inspection light with 200 mm arm The VHL-3001/2MR is a dust-protected halogen lamp designed for precise visual inspection and bench work; fitted with a 200 mm articulated arm for accurate alignment. Robust IP67 light head, arm IP65 protection 200 mm articulated arm for precise positioning Selectable voltage: 110/220/380/24 V Incl. 1.8 m connection cable for quick setup Consistent, high-contrast illumination for inspection tasks The halogen head delivers a continuous, high-contrast beam that supports detailed visual work and reduces the need for repeated rechecks. Built with IP67 protection at the light and IP65 for the arm, the lamp maintains reliable performance in dusty or damp workshop zones. Compatibility with 50/55/70 W bulbs allows selection of the luminous intensity required for measuring or assembly stations, so inspection accuracy is improved and measurement-related rework is minimised. Designed for industrial benches and production lines The fixture accepts multiple supply options (110/220/380/24 V), which simplifies integration into varied electrical environments without additional transformers. The 200 mm arm and stable mounting provide precise, vibration-resistant positioning while the 3.4 kg mass contributes to overall steadiness. These characteristics make the unit suitable for repetitive manufacturing tasks and quality-control benches where stable, repeatable lighting reduces cycle time and enhances throughput. Quick integration, low-maintenance operation Installation is straightforward: the lamp is supplied with a 1.8 m cable and accepts common bulb ratings, enabling rapid commissioning at the workbench. The dust-protected design and robust construction reduce maintenance intervals and downtime, while the articulated arm allows fast repositioning for different components or measuring tools. As a compact inspection light from Vertex, the model offers long-term operational reliability and straightforward replacement of consumables. Contact Metav Werkzeuge in Emmerich for technical specification and supply of the Vertex VHL-3001/2MR — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and swift delivery Technical data SKU: VHL-3001/2MR GTIN: 4061905092077 Manufacturer: Vertex Type: Halogen lamp, dust-protected Ingress protection: Light head IP67; arm IP65 Power options: 110/220/380/24 V Included accessory: Cable 1.8 m Facts Weight: 3.4 kg Arm length: 200 mm Compatible bulb ratings: 50 W / 55 W / 70 W Special features Articulated arm for precise alignment Robust construction for workshop use Rapid integration via included cable Suitable for inspection and assembly stations FAQ What power supplies are supported by this inspection lamp? The Vertex VHL-3001/2MR supports 110 V, 220 V, 380 V and 24 V, enabling installation in a variety of electrical systems. Is the lamp suitable for dusty production environments? Yes, the light head is rated IP67 and the arm IP65, so the unit is dust-protected and designed for harsh workshop conditions. Which bulb types can be used with this lamp? The lamp is compatible with 50 W, 55 W and 70 W halogen bulbs; this allows adjustment of brightness to the specific inspection task. Does the product include a cable for connection? The VHL-3001/2MR is supplied with a 1.8 m connection cable for immediate commissioning. How does the articulated arm benefit precision work? The 200 mm articulated arm permits fine positional adjustment of the light source, enabling repeatable alignment that supports accurate visual inspection and measurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Hard L-Jaws for VQC Vices Exchangeable Hardened Steel - Vertex
Take advantage of hardened construction and an L‑profile that raises the clamping plane to expand machining options while maintaining precision and repeatability; compatibility with VQC clamping systems ensures straightforward integration on existing benches. Order the hardened L‑jaws directly via Metav Werkzeuge or ask our consultants if needed. VQC-200L-MJL Hard L‑Jaws for VQC vises — hardened, 200 x 98 x 70 mm (Vertex) A hardened set of L‑profile jaws, the VQC-200L-MJL complements VQC vises to enable raised or offset clamping for irregular and thin workpieces. Hardened steel for long wear Raised L‑profile for offset clamping Compatible with VQC vises for precise alignment Better access and stable clamping for complex parts The hardened L‑profile provides a raised clamping surface that simplifies handling of uneven or thin components, reducing the need for packing and repeat setups. By lifting the workpiece above the standard vice jaws, the accessory enables access to features that would otherwise be obstructed, improving machining flexibility. The robust design minimises deformation under load, supporting consistent clamping force and thus contributing to repeatable machining results. Durability reduces downtime and total cost of ownership Manufactured as a hardened accessory, the jaws withstand extended use in demanding environments, which reduces the frequency of replacements. The hardening treatment increases wear resistance while preserving the jaw geometry that matters for accurate seating. This contributes directly to operational efficiency and lowers maintenance cycles—an economic advantage for production and maintenance departments seeking reliable clamping solutions. Seamless fit with VQC systems for quick installation Designed specifically for VQC vises, the jaws match the mounting geometry of the series to ensure correct alignment and straightforward installation. Compatibility with established clamping systems shortens setup time and eliminates the need for custom adapters, enabling faster changeovers on the shopfloor. The measured dimensions of 200 x 98 x 70 mm and a mass of 7.69 kg support predictable handling and balance during fitting. Practical handling and application guidance The L‑shape profile is particularly useful for gripping parts with grooves, flanges or thin walls where conventional flat jaws struggle to hold securely. Use the accessory as part of a modular clamping strategy to reduce secondary operations and fixtures. When replaced or repositioned, the hardened surfaces preserve seating accuracy, maintaining the precision expected from Vertex clamping components. Contact Metav Werkzeuge to discuss suitability for specific fixtures and to request procurement advice for Vertex hardened L‑jaws for VQC vises — our consultants at Metav Werkzeuge are available to clarify fitment and application details. Technical data Article number: VQC-200L-MJL GTIN: 4061905090394 Manufacturer: Vertex Facts Dimensions: 200 x 98 x 70 mm Weight: 7.69 kg eClass: 21029107 Special features Hardened L‑profile jaws for raised clamping Designed for VQC vises SKU: VQC-200L-MJL FAQ What machines are these jaws compatible with? The hardened L‑jaws are designed for use with VQC vises and match the mounting geometry of the VQC series for direct fitment. Can these jaws be used for delicate or thin-walled components? Yes, the raised L‑profile of the VQC-200L-MJL is suited to thin or flanged parts, allowing secure clamping without the need for extensive packing or special fixtures. How does hardening affect service life? The hardening treatment of these jaws increases wear resistance and preserves jaw geometry, thereby extending service life and reducing replacement frequency for Vertex clamping accessories. Are these jaws heavy to handle during setup? With a weight of 7.69 kg, the unit is substantial but manageable for standard workshop handling; the mass contributes to stable seating and predictable balance during installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Hard Machined L-Jaws For VQC Vices - Vertex
Take advantage of a robust clamping profile, a precise fit for VQC vises and stable support thanks to compact dimensions; order directly via Metav Werkzeuge or consult our specialists for exact application advice. VQC-200L-FJL Hard L‑Jaws for VQC vises — 200 × 102 × 70 mm, 7.92 kg (Vertex) A pair of hard L‑jaws engineered to deliver repeatable clamping performance for VQC vises in machine shops and production cells, optimised for stability and consistent reference surfaces. Hard L‑jaw profile for robust clamping Compatible with VQC vises Dimensions 200 × 102 × 70 mm Weight 7.92 kg for stable setup Durable clamping that preserves part geometry The VQC-200L-FJL adopts a hardened L‑profile that concentrates clamping forces where they matter, reducing elastic distortion of the workpiece and helping to maintain tight tolerances during machining. This configuration supports clamping accuracy over repeated setups, which is especially valuable for batch production and precision grinding operations. The design prioritises repeatability rather than decorative finish, giving a pragmatic solution for engineering environments. Predictable reference surfaces and vibration damping Measured 200 × 102 × 70 mm and weighing 7.92 kg, these jaws provide a stable contact area that reduces chatter and improves surface quality during cutting or finishing operations. The defined dimensions establish a reliable datum for alignment tasks and fixture planning, simplifying CAM setups and inspection procedures. The mass of the jaws contributes to vibration damping, which can extend tool life and lower scrap rates in routine machining. Seamless integration into VQC clamping systems Designed for use with VQC vises, the hard L‑jaw geometry fits existing mounting interfaces to streamline installation and inventory management. The focus on functional compatibility and robust construction reduces downtime and supports lean stocking strategies in workrooms. As a Vertex component, the jaws complement a workshop’s existing clamping ecosystem by offering a practical, mechanically focused upgrade for demanding applications. For reliable workshop clamping with Vertex components, contact Metav Werkzeuge for availability and technical guidance — stock and expert advice are available from our Emmerich location at info@metav-werkzeuge.com or by phone via our sales team. Technical data Article number: VQC-200L-FJL GTIN: 4061905088094 Manufacturer: Vertex Facts Dimensions: 200 × 102 × 70 mm Weight: 7.92 kg ECLASS: 21029107 Special features Hard L‑jaw design For VQC vises SKU: VQC-200L-FJL FAQ Which vises are these jaws compatible with? These jaws are designed for VQC vises and will fit standard VQC clamping interfaces; the product is listed as VQC-200L-FJL and manufactured by Vertex. What are the exact dimensions and weight? Dimensions are 200 × 102 × 70 mm and the weight is 7.92 kg, giving a compact, stable jaw suitable for precision clamping tasks. Do these jaws improve repeatability in batch production? Yes, the hard L‑jaw geometry provides consistent contact points and repeatable clamping, supporting tighter tolerances across multiple setups. Are these jaws suitable for heavy-duty machining? The design emphasises robust clamping and stable reference surfaces, making them appropriate for demanding workshop and production applications when used with matching VQC vises. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com