Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
240mm Extension Sleeve MK4 to MK3 Hardened Ground, DIN 2187 - TECWERK
Benefit from the combination of DIN 2187 compliance, a fully hardened and ground finish, and a long 240 mm overall length for stable tool extension and consistent concentricity; order the extension sleeve directly via Metav Werkzeuge or ask our consultants if needed. Extension sleeve DIN 2187 MK4×MK3, hardened and ground — TECWERK A Extension sleeve DIN 2187 MK4×MK3 designed to extend Morse taper tooling with high precision and a hardened, finely ground bearing surface for machining applications DIN 2187 standardised accuracy version Fully hardened and ground inside and out Adapts MK4 to MK3 Morse tapers 240 mm overall length, D 36 mm Reliable alignment and reduced runout for consistent machining The extension sleeve follows DIN 2187, supplying a standardised interface that maintains tool alignment across repeated insertions. Its fully hardened body and surfaces ground inside and out reduce taper wear and help preserve concentricity during extended runs. For workshops that prioritise repeatable results, the accuracy execution minimises radial runout and contributes to consistent hole quality and surface finish. The adapter construction also reduces the risk of fretting between mating tapers, prolonging the service life of both tool and holder. Greater reach while retaining secure taper connection With an overall length of 240 mm (L2) and a working length L1 of 122.5 mm, this extension is suited to operations requiring extra reach without compromising stability. The combination of an external MK4 taper and internal MK3 taper lets the component be used as a reliable link between different Morse taper sizes, enabling deeper access in bores or extended tooling setups. The stated diameter D 36 mm gives a robust cross-section that resists bending under typical machining loads, so the tooling stack remains rigid and predictable. Workshop-grade durability and low maintenance Manufactured in an accuracy grade and treated to be entirely hardened, the sleeve is supplied ready for service with minimal preparation. The ground internal and external surfaces ensure trouble-free seating with Morse taper tooling and lower the need for frequent rework or adjustment. Where replacement intervals impact uptime, the hardened and ground finish helps retain dimensional integrity, reducing the frequency of swaps and supporting steadier production cycles in small and large workshops alike. Broad compatibility across Morse taper tooling Intended for use with tools and holders featuring Morse tapers, the component integrates seamlessly into conventional drilling and tooling systems that adhere to DIN standards. The adapter’s geometry and finish make it appropriate for retrofit tasks and mixed-equipment environments, offering a straightforward technical solution when a change of taper size is required. The standardised design also simplifies inventory management: one precision sleeve covers a defined adaptation need while matching existing tool protocols. For procurement of the TECWERK extension sleeve with DIN 2187 accuracy and a 240 mm overall length, contact Metav Werkzeuge for tailored supply and technical advice. Technical data Article number: 2000832365NW Standard: DIN 2187 Product: Extension sleeve Manufacturer: TECWERK Facts Overall length L2: 240 mm Working length L1: 122.5 mm Diameter D: 36 mm Packaging unit: 1 Special features Accuracy execution according to DIN 2187 Fully hardened construction Ground inside and out Inner taper: MK3 Outer taper: MK4 For tools with Morse taper FAQ What standard does the adapter comply with? The adapter is manufactured to DIN 2187, ensuring standardised dimensions and fit for Morse taper tool compatibility. Which taper sizes are connected by this sleeve? This sleeve adapts an external MK4 taper to an internal MK3, enabling secure mating between those Morse taper sizes. How long is the extension and what is the effective working length? The extension has an overall length of 240 mm with a working length (L1) of 122.5 mm for extended reach in tooling assemblies. Is the component heat-treated or ground for accuracy? Yes, the sleeve is completely hardened and ground both internally and externally to provide an accuracy execution suitable for precision tooling. Which diametral size does the sleeve have? The sleeve features a diameter of 36 mm (D), offering a solid cross-section for stable performance. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
240mm X-Y Cross Table 240x190mm Travel Precision, 131mm Height - SAIM
Take advantage of a space-saving design and robust construction for reliable, repeatable positioning in compact workshops; the combination of a 240 x 190 mm table and a 24 kg mass keeps setups stable and reduces rework. Order the unit directly via Metav Werkzeuge or contact the consultants for application advice. SAIM 240 XYG Cross Table — compact 240 x 190 mm table, low 131 mm profile The SAIM 240 XYG cross table is a compact positioning table designed for precision alignment and small-part machining tasks in workshop environments. Compact 240 x 190 mm table Low-profile 131 mm height Robust 24 kg construction Precise manual cross-table positioning Space-saving layout that speeds machine set-up A small footprint and a low profile mean less obstruction around the machine bay and quicker access during mounting and clamping operations. The 240 x 190 mm top offers a defined work area that suits jigs, small fixtures and inspection tooling without occupying valuable bench or machine table space. The 131 mm height keeps centre-of-gravity changes minimal when added to an existing table, so alignment procedures remain straightforward and repeatable. Mass and stability that improve cut quality A heavier base absorbs incidental vibration and resists movement under load, which translates into steadier positioning during fine adjustment and measurement tasks. The 24 kg construction delivers a measurable improvement in damping compared with lightweight alternatives, supporting more consistent outcomes on delicate operations. This stability reduces the need for time-consuming rechecks and thus supports higher effective productivity. Designed for controlled, precise XY positioning The cross-table design focuses on accurate, manual adjustment in two axes to enable reliable placement of small workpieces for drilling, milling or inspection. The unit’s geometry and mounting footprint make it suitable as an accessory for a range of bench and machine setups where precision and repeatability are required. The cross table format provides intuitive control over lateral and longitudinal alignment while keeping the overall assembly compact. Practical procurement and workshop support Sourcing through a trusted supplier simplifies delivery and aftercare: Metav Werkzeuge’s Emmerich facility acts as a quality filter for the European market and ensures reliable supply. With a broad product range and an experienced team, procuring the right accessories and receiving clear technical guidance is straightforward, helping maintain continuous workshop operation and reduce downtime. For tailored advice or a quotation for the SAIM 240 XYG cross table, contact Metav Werkzeuge — specialists in precision tools based in Emmerich who can advise on delivery and compatibility for specific machines. Technical data Article number: SAIM-240XYG GTIN: 4061905082221 Brand: SAIM ECLASS: 21041714 Facts Table dimensions: 240 x 190 mm Height: 131 mm Weight: 24 kg Special features Product type: Cross table Gallery images available (technical drawing and model views) UID: SAIM-240XYG FAQ What are the tabletop dimensions of this cross table? The tabletop measures 240 x 190 mm as stated for the SAIM 240 XYG cross table, providing a compact working area for small fixtures and parts. How tall is the SAIM 240 XYG and why does that matter? The SAIM 240 XYG has a height of 131 mm, which minimises changes to the working height of the host machine and helps keep set-up and alignment procedures straightforward. Does the cross table offer good stability for precision tasks? Yes — the cross table’s 24 kg mass contributes to stability and vibration damping, which supports repeatable positioning and reduces rework during fine machining or inspection. What kind of applications suit this cross table? The unit is intended for precision positioning tasks such as small-part machining, drilling set-ups and inspection work where a compact, controlled XY adjustment is required; the SAIM 240 XYG is configured for those workshop scenarios. Are there visual references or drawings available? Technical drawings and model views are available in the product gallery to assist with mounting and integration planning for the SAIM 240 XYG. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
240x190 Cross Table Precise Positioning, 75mm Height - SAIM
Take advantage of a compact cross table with a platform of 240 x 190 mm, a low overall height of 75 mm and a massed construction of 14 kg for stable positioning; order the SAIM-240X directly via Metav Werkzeuge or consult our specialists for application advice SAIM-240X – Cross table with 240 x 190 mm platform and 75 mm height The SAIM-240X is a compact cross table designed for controlled fixture and fine positioning tasks in workshop and inspection environments Cross table, precision positioning Platform 240 x 190 mm Overall height 75 mm Weight 14 kg Accurate positioning from a compact footprint The SAIM-240X offers a compact platform (240 x 190 mm) that supports precise alignment and fixture work without occupying excessive bench space. The unit’s 75 mm overall height reduces the stack-up when combined with measuring heads or small fixturing devices, enabling close-to-surface setups. By keeping travel and interfaces minimal, the table facilitates repeatable placement and contributes to a more efficient workflow when fine adjustments are required. The stable mass of 14 kg adds resistance to vibration and enhances positional reliability during manual operations. Stable support and simple integration into existing benches With its modest footprint and low profile, this cross table integrates easily into standard workshop layouts and inspection rigs. The design emphasises stability and straightforward mounting options, making the unit suitable for small jigs, gauging fixtures and auxiliary positioning tasks where space is limited. Clear, measurable specifications simplify planning: the platform dimensions, height and weight provide a reliable basis for designing mounts and selecting complementary accessories. The straightforward characteristics of the unit reduce uncertainty during selection and shorten the specification phase. Practical advantages for daily workshop use For workshops seeking a dependable positioning aid, the cross table combines measurable attributes with practical handling. The defined platform area supports versatile clamping arrangements while the low profile minimises interference with surrounding equipment. The SAIM-240X is easy to account for in assembly drawings and inspection documentation thanks to its concrete numeric values. When accuracy and repeatability matter, these factual specifications help maintain process consistency and support quality control procedures. Contact Metav Werkzeuge for tailored advice on integrating the SAIM-240X into existing setups or to arrange supply direct from Emmerich; phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: SAIM-240X GTIN: 4061905082177 Product type: Cross table Manufacturer: SAIM Facts Platform dimensions: 240 x 190 mm Overall height: 75 mm Weight: 14 kg ECLASS: 21041714 Special features Gallery image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/af/2f/97/63/63972fafc806fb82109e3306/saim_draw_x.jpg Technical drawing: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b4/aa/6b/63/636baab47fdd0e78680bff31/saim-240x-technische-zeichnung.jpg FAQ What are the platform dimensions of the SAIM-240X? The platform of the SAIM-240X measures 240 x 190 mm, stated for straightforward integration into fixturing and layout planning. What is the overall height of the cross table? The SAIM-240X has an overall height of 75 mm, which helps minimise vertical build-up in measurement and assembly configurations. How much does the SAIM-240X weigh? The unit has a mass of 14 kg, providing a stable base for positioning and reducing susceptibility to minor disturbances. Which product identifiers should be used for ordering? Use SKU SAIM-240X and GTIN 4061905082177 when specifying or ordering this cross table. For which workshop tasks is this cross table suitable? The SAIM-240X is suitable as a compact positioning aid for fixture work, gauging preparations and small-scale inspection or assembly tasks where a defined platform and low profile are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
240x190 Cross Table Precision Cross Slide, 113mm Height - SAIM
Take advantage of precise XY positioning and a compact 240 x 190 mm platform for reliable fixture work and inspection; the robust construction and approx. 20 kg mass ensure stability for short-run machining and measuring tasks. Order the SAIM-240XY directly via Metav Werkzeuge or consult our specialists for integration advice. SAIM-240XY compact cross table with 240 x 190 mm travel by SAIM The SAIM-240XY is a compact cross table designed for precise XY positioning in workshop, inspection and assembly setups, offering a stable platform for fixture work and small-machine integration 240 x 190 mm travel platform Robust construction, approx. 20 kg mass Compact 113 mm overall height Precise positioning to streamline setup and inspection The cross table is intended to simplify repetitive alignment tasks by providing a stable, low-profile platform with defined X and Y travel. The 240 x 190 mm travel area allows parts to be positioned accurately without frequent re-clamping, which reduces overall set-up time and increases throughput in small-batch production. The combination of a clearly defined travel envelope and a solid mass of around 20 kg helps to damp vibrations, so measurements and light machining operations benefit from improved consistency and fewer rejects. Compact design that fits tight workspaces Engineered for confined benches and inspection stations, this compact footprint keeps the height to 113 mm while still offering a practical working area. The reduced vertical profile aids access for probes, cameras or tool spindles and makes integration beneath vision systems or inside small enclosures straightforward. The compact construction contributes to flexible machine layout and easier handling during transfer between workstations, supporting efficient workflow without compromising positioning capability. Built for reliability and repeatable results A focus on robust construction and precise guidance yields dependable repeatability for typical workshop and metrology tasks. The mass and rigidity of the stage limit micro-movement under light loading, improving the steadiness of repeat measurements or fine-positioning steps. Where traceable repeatability is required, the stable platform reduces operator intervention and supports more consistent process results across repeated cycles. Practical applications and easy visual documentation The stage suits inspection, assembly, prototyping and light machining applications where controlled XY movement is essential. Available model and technical drawings facilitate planning and integration: the included technical illustration supports mounting considerations and helps to determine clearances and accessory compatibility. The overall concept is aligned with workshops and quality labs that require a reliable, space-conscious XY solution without complex interfaces. Contact Metav Werkzeuge for a tailored recommendation on the SAIM-240XY cross table and to discuss integration options from our Emmerich-based team, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SAIM-240XY GTIN: 4061905082184 Weight: 20 kg Facts Travel X x Y: 240 x 190 mm Overall height: 113 mm ECLASS: 21041714 Special features Cross table / XY stage design Technical drawing and model images available Compact, low-profile construction FAQ What are the primary dimensions of the stage? The stage provides a 240 x 190 mm travel area with an overall height of 113 mm, suitable for compact setups and inspection stations. Is the stage heavy enough to provide stable positioning? With a mass of approximately 20 kg, the cross table offers a stable platform that helps to damp vibrations for repeatable positioning. Can the stage be integrated under vision systems or inside enclosures? The low-profile design and compact footprint make the unit well suited for integration beneath vision systems and in confined spaces where access is required. Are technical drawings available to assist with mounting? Yes, technical illustrations and model images are supplied to support planning and mounting decisions for fixture and machine integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
240x190 Cross Table Precision Cross Slide, 98mm Height - SAIM
Take advantage of the robust combination of precise positioning, a compact 240 x 190 mm table area and a solid 19 kg construction for reliable workshop machining. Order the cross slide table directly via Metav Werkzeuge or consult the technical advisors for specification support. SAIM-240XG precision cross slide table — compact 240 x 190 mm table area SAIM-240XG is a compact cross slide table designed for precise component positioning in small to medium workshop applications, offering stable mounting and straightforward integration with milling and drilling setups. Compact cross slide table design Table area 240 x 190 mm Solid 19 kg construction Precise manual positioning Accurate positioning for repeatable machining The cross slide unit delivers consistent, repeatable movement across two axes, enabling precise alignment of workpieces for milling, drilling and light machining tasks. The machined table surface and travel leads ensure that each incremental adjustment results in predictable displacement, which reduces setup time and minimises rework. This makes the unit suitable for jigs, prototyping benches and repair stations where exact placement is required rather than high-speed production. Space-saving design that supports workshop efficiency With a compact table area of 240 x 190 mm and a modest footprint, the device fits neatly onto crowded benches and small machine tables while still offering a stable working surface. The relatively low mass of 19 kg provides a balance between portability and rigidity, so the module can be repositioned when workshop layouts change but remains steady during machining operations. The compact form factor reduces handling complexity and helps streamline the workflow in mixed-use shops. Built for integration and straightforward maintenance The cross slide table is engineered for easy mounting and integration with common tooling and fixtures, allowing straightforward attachment to milling heads, drill stands or rotary tables. Its simple mechanical operation means maintenance is limited to routine lubrication and inspection, so downtime is kept to a minimum. The straightforward construction also makes it a practical choice for training environments and small-scale manufacturing, where reliability and ease of use are priorities. Practical benefits for decision-makers and technicians Specifiers will value the unit’s balance of accuracy and practicality: it supports precise manual positioning without the cost or complexity of motorised stages, while technicians benefit from familiar mechanical controls and robust build quality. The combination of compact dimensions, reliable positioning and uncomplicated servicing translates into lowered operational overhead and predictable performance on day-to-day tasks. Contact Metav Werkzeuge to discuss how the SAIM-240XG suits specific workshop requirements, request the technical drawing or arrange purchase directly from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: SAIM-240XG GTIN: 4061905082214 Product: Cross slide table ECLASS: 21041714 Facts Table dimensions: 240 x 190 mm Weight: 19 kg Height: 98 mm Special features Technical drawing and model images available Compact, bench-mountable design Suitable for precision fixture and tooling integration UID: SAIM-240XG FAQ What applications is this cross slide table suitable for? The SAIM-240XG cross slide table is suitable for precise positioning in milling, drilling, fixture work and small-scale prototyping where manual, repeatable adjustments are required. How is the unit mounted to a machine table? Mounting is accomplished via the machined base and through-holes shown in the technical drawing; the SAIM-240XG is designed for secure bench or machine-table attachment. Is the device ready for immediate use on delivery? The cross slide table arrives ready for mechanical installation; routine lubrication and final alignment are recommended before the first production use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
248mm Universal Centre Punch Self-Centering, Accuracy 0.005mm, 1500r.p.m. - Vertex
Take advantage of a robust alloy steel construction combined with 0.005 mm repeat accuracy and a reliable revolving tip for consistent centring. Order the part directly via Metav Werkzeuge or consult the team for application advice. Universal revolving centre VPC‑MT5 — rotating live centre in alloy steel, 1500 r.p.m. The Universal revolving centre VPC‑MT5 is a rotating live centre designed for general lathe centring, offering precision repeatability and durable alloy‑steel construction for workshop and light industrial use. Alloy steel construction for longevity Repeat accuracy of 0.005 mm Safe operation up to 1500 r.p.m. Length 248 mm, sturdy 3.2 kg Consistent centring for repeatable results The VPC‑MT5 delivers repeatable accuracy of 0.005 mm, which reduces rework and shortens setup cycles on turning operations. This level of precision is achieved through a balanced rotating tip and a rigid body made from alloy steel, ensuring stable contact with the workpiece under normal lathe speeds. By specifying a measured repeatability rather than marketing estimates, the centre provides a verifiable basis for quality control and process planning, supporting predictable outcomes in series production and precision repairs. Built for workshop reliability and safe operation Designed for continuous rotation up to 1500 r.p.m., the revolving tip minimises friction and heat build‑up during turning, which helps protect both the workpiece and the lathe spindle. The solid construction and a length of 248 mm, combined with a mass of 3.2 kg, ensure mechanical stability during centring tasks. These characteristics translate into longer component life, fewer interruptions for maintenance and a lower risk of run‑out; the result is a more economical machining process and less downtime for the workshop. Straightforward integration and practical benefits As a universal live centre, the VPC‑MT5 is suitable for a wide range of standard lathe centring tasks where a revolving centre is required. The robust alloy‑steel body withstands regular handling in busy environments and supports reliable operation over many cycles. Clear technical data such as GTIN 4061905088018, length and measured accuracy enable easier procurement, traceability and inclusion in quality documentation. For teams planning tool inventories or upgrading centre tooling, the combination of precision, durability and known speed limits simplifies specification decisions and aligns with standard workshop requirements. Contact Metav Werkzeuge for purchase or technical guidance on the VPC‑MT5 and receive expert advice from the Emmerich team. Technical Data Article number: VPC-MT5 GTIN: 4061905088018 Material: legierter Stahl Length: 248 mm Weight: 3.2 kg Numbers / Facts Repeat accuracy: 0.005 mm Maximum speed: 1500 r.p.m. eClass: 21022304 SKU: VPC-MT5 Special features / Versions Universal revolving centre (mitlaufend) Alloy steel construction Designed for lathe centring applications FAQ What maximum rotational speed is recommended? The VPC‑MT5 is specified for operation up to 1500 r.p.m., which supports common turning speeds while maintaining designed repeatability. How precise is the centring performance? The universal revolving centre provides a repeat accuracy of 0.005 mm, making it suitable for precision centring tasks requiring consistent results. What are the main dimensions and weight of the unit? The VPC‑MT5 has a length of 248 mm and a mass of 3.2 kg, dimensions that favour stability on standard lathe setups. Which material is the tool made from? The centre body is manufactured from alloy steel, selected for durability and wear resistance in workshop conditions. How is the product identified for ordering and traceability? Order and identify the item by SKU VPC‑MT5 or GTIN 4061905088018 for procurement and inventory purposes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
24mm 5C Collet, 0.02mm Accuracy, 87mm Length - Vertex
Combining a concentricity of 0.02 mm, a 24 mm clamping diameter and a compact 87 mm length, the collet ensures repeatable, precision clamping that supports consistent machining quality. Order the 5C-24 collet directly via Metav Werkzeuge or ask our consultants if needed. 5C Collet 24 mm by Vertex — precision clamping for machining The 5C collet 24 mm is a precision clamping tool designed for securing cylindrical tooling and workpieces in conventional and CNC machining applications 24 mm clamping diameter Concentricity ±0.02 mm 87 mm overall length Compatible with standard 5C systems Improved machining results through tighter concentricity A reliable clamping solution reduces radial runout and the associated surface defects; the collet’s concentricity 0.02 mm specification translates into measurable improvements in finish quality and repeatability. By maintaining a stable tool axis, cutting forces remain consistent and tool wear is reduced, which can extend tool life and reduce rework rates. This section highlights the direct production advantage of using a precisely manufactured collet in both serial and single-piece workflows. Seamless integration with established 5C toolholding systems Designed to match the dimensions and mechanical interfaces typical of the 5C standard, the clamping unit’s 24 mm diameter and 87 mm overall length allow straightforward integration into existing collet chucks and fixtures. Compatibility with the common 5C system means reduced setup time and predictable clamping behaviour, supporting faster changeovers and more efficient machine utilisation. The compact format also aids accessibility in tighter spindle arrangements. Practical handling and stability that support uptime With a mass of 0.21 kg, the component is lightweight for handling while retaining the mass distribution needed for stable clamping under machining loads. Manufactured by Vertex, the item benefits from industry-standard production practices that target concentricity and repeatability. The balanced combination of low handling weight and dimensional control helps maintain consistent cycle times and contributes to a dependable production flow. Contact Metav Werkzeuge for compatibility advice and to secure the Vertex 5C-24 collet directly from our Emmerich warehouse Technical Data Article number (SKU): 5C-24 GTIN: 4061905090660 ECLASS: 21041712 Brand: Vertex Facts Diameter: 24 mm Length: 87 mm Weight: 0.21 kg Accuracy: 0.02 mm Special features Type: 5C collet Compatible with standard 5C systems Suitable for securing cylindrical tooling and workpieces FAQ What level of concentricity can be expected from this collet? The Vertex 5C-24 collet is specified with a concentricity of 0.02 mm, which supports precise alignment of tooling and workpieces in machining operations. Which toolholding systems accept this collet? This collet is made to fit standard 5C systems; the 24 mm clamping diameter and 87 mm overall length ensure compatibility with most 5C chucks and fixtures. Is the 5C-24 suitable for high-speed applications? The Vertex 5C-24 collet is designed for stable clamping and low runout; suitability for a specific spindle speed should be confirmed against machine and tooling specifications. How does the collet affect tool life and surface finish? By maintaining a 0.02 mm concentricity, the collet reduces radial runout, which helps to extend tool life and improve surface finish during cutting processes. What are the handling characteristics of the collet? Weighing 0.21 kg, the 5C-24 collet is easy to handle during setup while providing sufficient mass for stable clamping during machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
24mm Drill Chuck Mount DIN 69871A B16 SK40 A25mm - TECWERK
Combining a DIN 69871 Form A steep taper with an SK40 shank and a B16 chuck interface yields a compact, repeatable solution for secure drill-chuck mounting; order the drill chuck arbor directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK drill chuck arbor — DIN 69871 Form A, SK40 to B16 A TECWERK drill chuck arbor designed for secure mounting of B16 chucks on SK40 spindles, engineered for standard machining and retrofit applications. Steep taper to DIN 69871 Form A Accepts drill chucks to DIN 238 taper SK40 shank with B16 chuck cone Reliable, repeatable chuck mounting for precision machining The adaptor's steep taper compliant with DIN 69871 ensures a tight machine-to-tool interface that reduces runout and maintains concentricity during drilling and light milling. By using an industry-standard taper seat, the arbor provides mechanical rigidity and a predictable contact surface, which translates into more consistent hole quality and longer useful life for both chucks and spindles. The short overall length contributes to reduced overhang and improved stability in close-tolerance operations. Broad compatibility for seamless integration into existing tooling Designed to accept drill chucks made to DIN 238, the adaptor bridges common chuck cones and machine spindles without complex modifications. The SK40 shank delivers compatibility with a wide range of collet and taper holders, while the B16 chuck cone interface preserves established chuck mounting practice. This combination simplifies tool changes and reduces set-up times, offering a straightforward path to retrofit older machines or unify fixtures across a production group. Practical shop design for dependable everyday use With an effective length of 24 mm and a chuck-seat diameter A = 25 mm, the adaptor is compact and suited to workshops where space and accessibility matter. The single-piece configuration and standardised interfaces make it easy to store and identify among tooling sets; packaged per unit, it is ready for immediate use. For demanding production routines, the arbor supports predictable performance and helps to maintain process stability over repeated changeovers — a pragmatic choice for engineering and maintenance teams. For reliable spindle-to-chuck interfaces and stock availability of the TECWERK SK40 to B16 drill chuck arbor, contact Metav Werkzeuge in Emmerich for tailored advice and rapid supply. Technical data Article number: 2000832821NW Item label: Bohrfutteraufnahme DIN 69871A B16 SK40 A.-L.25mm TECWERK Manufacturer: TECWERK Facts Norm: DIN 69871 L: 24 mm A: 25 mm D: B16 Special features Steep taper DIN 69871 Form A For drill chucks with taper to DIN 238 Shank: SK40 Packaging unit: 1 FAQ What machine spindles is this arbor compatible with? The TECWERK drill chuck arbor is compatible with spindles accepting an SK40 taper; the adaptor provides the DIN 69871 Form A interface and a B16 chuck cone for standard chuck mounting. Can standard drill chucks be fitted to this adaptor? Yes. The arbor accepts drill chucks produced to DIN 238, enabling direct mounting of industry-standard chucks onto an SK40 shank via the B16 interface. What are the key dimensions to check before ordering? Check the taper standard (DIN 69871), the shank type (SK40), and the chuck cone (B16). Relevant dimensions include the effective length L = 24 mm and the seat diameter A = 25 mm for correct fitment. Is the adaptor suitable for heavy milling or only drilling? The compact design and steep taper provide good rigidity for drilling and light milling; for heavy milling, select tooling specified for higher radial loads. The TECWERK arbor is optimised for stable chuck mounting and repeatable holemaking. How is the item supplied? The product is supplied as a single unit (packaging unit: 1) and is ready for installation in compatible tool-holding systems; refer to the item label for exact identification (SKU 2000832821NW). Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
24mm Hex Nut M16 Pressed And Face-Machined Strength Class 10, DIN 6331 - AMF
Reliable, standard-compliant fastening that combines DIN 6331 conformity with strength class 10 and precision-milled contact faces for dependable clamping. Take advantage of consistent torque transfer and compact dimensions for robust assemblies; order the M16 hexagon nut directly via Metav Werkzeuge or consult our specialists for application advice. Hexagon Nut DIN 6331 M16 (SW 24, Strength 10) – AMF The Hexagon Nut DIN 6331 M16 is a precision-machined fastening element designed for high-load industrial assemblies and maintenance tasks, offering standard compatibility and reliable clamping performance. DIN 6331 standardised geometry Strength class 10 for high loads 24 mm spanner width (SW 24) Precision milled faces, total height 24 mm Reliable clamping for demanding assemblies Manufactured to the DIN 6331 specification, this fastening element provides a predictable interface with standard bolts and threaded components. The M16 designation denotes the nominal thread size, ensuring compatibility with existing metric hardware. With strength class 10, the part is engineered for high clamping forces, which translates into fewer loose connections and reduced downtime in production and maintenance environments. The clear technical standard reduces sourcing uncertainty and supports process planning. Precision machining that improves assembly efficiency Pressed and precision-milled faces deliver consistent contact surfaces and accurate seating under tool engagement. The combination of milled flats and a defined 26.8 mm corner measure produces uniform torque transfer to the clamped joint, helping to avoid uneven preload and repeated retorquing. The compact 24 mm spanner width and a total height of 24 mm make the component easy to handle during automated or manual assembly, shortening cycle times without compromising reliability. Versatile industrial use and installation benefits Suitable wherever elevated load capacity and standard compliance are required, this hexagon nut supports machine building, fixture assembly and general workshop repairs. Its standard geometry simplifies inventory management by matching common metric bolt dimensions, while the robust design aids long-term operational safety. For procurement and fitment questions, internal specialists can advise on torque settings and matching fasteners to achieve optimal clamping results. For procurement or technical advice on the AMF Hexagon Nut DIN 6331 M16, contact Metav Werkzeuge in Emmerich by phone or email for prompt, expert support. Technical Data Article number: 4000833413NW SKU: 4000833413NW Type designation: M16 Product type: Hexagon nut Manufacturer: AMF Core data Thread size: M16 Standard: DIN 6331 Total height: 24 mm Spanner width: 24 mm Corner measure: 26.8 mm Package unit: 1 Special features Strength class 10 Pressed and milled faces Standardised geometry for compatibility Precision component for industrial assemblies FAQ What standard does this nut comply with? The component conforms to DIN 6331, ensuring standardised dimensions and interchangeability with metric bolt systems. What load capability does the nut offer? The nut is specified as strength class 10, which indicates suitability for high-clamping-force applications and demanding assemblies. Which spanner size fits this nut? A 24 mm spanner (SW 24) is required to install and remove the nut, matching the stated spanner width. Is this nut suitable for machine building and fixtures? Yes, the Hexagon Nut DIN 6331 M16 from AMF is designed for machinery, fixtures and maintenance where standard compatibility and robust clamping are required. How is the contact surface prepared on this nut? The nut features pressed and precision-milled faces, providing consistent seating and reliable torque transfer. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
24mm M16 Hexagon Nut DIN 6330B Strength Class 10, Overall Height 24mm - AMF
Robust fastening with strength class 10 and a standard M16 thread ensures secure joints; the SW 24 mm across‑flats allows use with common spanners. Order the AMF hexagon nut directly via Metav Werkzeuge or ask our consultants if needed. AMF Hexagon Nut M16 (DIN 6330B) – Strength Class 10, SW 24 mm The AMF Hexagon Nut M16 (DIN 6330B) is a standard fastening component designed for industrial assemblies where secure, repeatable clamping is required. Strength class 10 for high clamping force Across‑flats 24 mm for standard spanners Complies with DIN 6330B for interchangeability Reliable performance for heavy‑duty assemblies The component delivers predictable mechanical performance thanks to its strength class 10 rating, which indicates a high tensile and yield capability suitable for demanding joints. Specified as an M16 hexagon nut under DIN 6330B, this fastening element provides a standardised geometry that supports consistent torque application and repeatable preload. For production environments, this reduces rework and minimises variations in clamping force, translating into fewer unscheduled stops and a steadier assembly quality. Seamless compatibility with common tools and standards Designed with an SW 24 mm across‑flats dimension, the nut fits standard spanners and sockets used in maintenance and assembly shops. Conformity to DIN 6330B ensures interchangeability with equivalent standard parts, simplifying stocking and replacement processes. The established standard means less time spent verifying part fitment and more time on productive work, so tool inventories are leaner and procurement decisions become easier to standardise across sites. Predictable maintenance and reduced downtime Using a standardised hexagon nut from a recognised supplier reduces uncertainty in maintenance cycles. The defined overall height and corner measurements promote consistent thread engagement and predictable torque‑to‑tightness relationships. As a result, bolted joints maintain clamping integrity over repeated service intervals, lowering the risk of loosening under vibration and thermal cycling. This reliability supports a more economical lifecycle by reducing unscheduled inspections and part replacements. Procurement clarity and expert backing from Metav Sourcing from a trusted partner streamlines supply and documentation. Metav combines extensive distribution capacity with sector expertise, offering centralised access to precision components and clear product data for planning and compliance. For purchasers aiming to rationalise suppliers and ensure stable delivery, Metav’s proximity and stock management act as a practical quality filter for the European workshop environment. Contact Metav Werkzeuge today to secure AMF hexagon nuts in strength class 10 for your next production batch and benefit from tailored procurement advice and reliable supply from Emmerich. Technical Data Article number: 4000833398NW SKU: 4000833398NW Type: M16 Standard: DIN 6330B Facts Thread size: M16 Across‑flats (SW): 24 mm Overall height: 24 mm Strength class: 10 Corner measure: 26.8 mm Special features Product type: Hexagon nut Manufacturer: AMF Packaging unit: 1 UID: 4000833398NW Addition: Eckenmaß: 26,8; Festigkeitsklasse: 10 FAQ What thread size does this hexagon nut have? The AMF hexagon nut is specified as M16, corresponding to a standard M16 metric thread. Which standard governs the nut’s dimensions and interchangeability? Dimensions and interchangeability follow DIN 6330B, ensuring the AMF hexagon nut matches equivalent standard parts. What spanner size is required for tightening? The nut uses an SW 24 mm across‑flats dimension, compatible with standard 24 mm spanners and sockets. What strength class is this nut rated to? This AMF hexagon nut is rated strength class 10, intended for applications requiring higher clamping forces. How is the product supplied for ordering and stocking? The item is supplied in a packaging unit of 1; refer to SKU 4000833398NW when ordering. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
24mm Schnellspannbohrfutter Spann-Ø 0,2-3mm selbstspannend, für Rechtslauf - ALBRECHT
Schnellspannbohrfutter SBF Spann-Ø 0,2-3mm B10 Rechtslauf – ALBRECHT Schnellspannbohrfutter SBF für präzise Bohrungen mit Kegelaufnahme B10, ausgelegt für Rechtslaufbetrieb und feinjustierten Spannbereich Präzise Spann-Ø 0,2–3 mm Kegelaufnahme B10 für sichere Kraftübertragung Selbstspannend mit hoher Spannkraft Einsatzgehärtete, geschliffene Verschleißteile Optimiert für höchste Rundlaufgenauigkeit Hohe Effizienz durch gezielte Spannleistung Das Schnellspannbohrfutter überzeugt durch maximale Spannkraft bei sehr kleinem Spannbereich, was besonders feine Bohrungen stabil ermöglicht. Die Kombination aus selbstspannender Mechanik und der Kegelaufnahme B10 sorgt für direkte Kraftübertragung und reduziert Werkzeugspiel. Für Fertigungsprozesse bedeutet das: weniger Ausschuss, konstante Bohrqualität und geringere Rüstzeiten. Anwender profitieren unmittelbar von der höheren Prozesssicherheit und planbaren Produktionszyklen. Langlebigkeit und Wartungsfreundlichkeit für den Werkstattalltag Durch eingesetzte einsatzgehärtete und geschliffene Verschleißteile ist die Lebensdauer deutlich erhöht; Bauteile sind austauschbar, was Reparaturzeiten verkürzt. Die robuste Ausführung schützt vor Verformung bei Dauerbeanspruchung und erhält die Rundlaufgenauigkeit über lange Laufzeiten. Dadurch reduzieren sich Instandhaltungsaufwand und Betriebskosten, was besonders in mittelständischen Betrieben den laufenden Betrieb wirtschaftlicher macht. Anwendungsfelder und Zielgruppe Das Produkt ist ausgelegt für präzise Zerspanungsaufgaben an Dreh- oder Bohrmaschinen mit B10-Aufnahme und Rechtslauf. Typische Anwender sind Werkzeugmacher, Feinmechaniker und Produktionsbetriebe, die hohe Genauigkeit bei kleinen Durchmessern verlangen. Das Bohrfutter eignet sich für Serienfertigung ebenso wie für Einzelteile mit hohen Qualitätsanforderungen. Die einfache Montage und Austauschbarkeit der Teile macht es attraktiv für Werkstätten mit begrenzter Stillstandszeit. Technische Vorteile, kurz erklärt Die Kegelaufnahme garantiert axiale und radiale Stabilität; der enge Spannbereich erlaubt sichere Fassung von Feinstbohrern. Rechtslauf als spezifizierte Drehrichtung vermeidet Missverständnisse beim Einsatz. Solche Merkmale sind besonders relevant, wenn höchste Präzision bei kleinen Bohrdurchmessern gefordert wird. Für präzise Kleinstbohrungen empfiehlt sich das Schnellspannbohrfutter SBF von ALBRECHT – Bestellungen und technische Beratung über Metav Werkzeuge GmbH per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Leistungsmerkmale Artikelnummer: 4120167202NW Marke: ALBRECHT Produktart: Schnellspannbohrfutter Typ: SBF Aufnahme: B 10 Verpackungseinheit: 1 Fakten Spannbereich: 0,2–3 mm Außendurchmesser: 24 mm Besonderheiten selbstspannend maximale Spannkraft mit Kegelaufnahme B10 (Kegelaufnahme für präzise Kraftübertragung) für hohe Dauerbeanspruchung bei höchster Rundlaufgenauigkeit alle Verschleißteile sind einsatzgehärtet, geschliffen und austauschbar Drehrichtung: Rechtslauf FAQ Welche Spannbereiche deckt das Schnellspannbohrfutter ab? Das Schnellspannbohrfutter SBF von ALBRECHT deckt einen Spannbereich von 0,2–3 mm ab und eignet sich damit besonders für Feinstbohrer und präzise Kleinstbohrungen. Welche Aufnahme ist notwendig für die Montage? Für die Montage wird eine B10-Kegelaufnahme benötigt. Die Kegelaufnahme gewährleistet sichere Kraftübertragung und stabilen Rundlauf. Sind Ersatzteile verfügbar und austauschbar? Ja, alle Verschleißteile des ALBRECHT Schnellspannbohrfutters sind einsatzgehärtet, geschliffen und austauschbar, was die Instandhaltung vereinfacht. Für welche Drehrichtung ist das Bohrfutter ausgelegt? Das Schnellspannbohrfutter ist für Rechtslauf ausgelegt und entsprechend gekennzeichnet. Für welche Anwendergruppen ist das Produkt besonders geeignet? Das ALBRECHT Schnellspannbohrfutter richtet sich an Werkzeugmacher, Feinmechaniker und Produktionsbetriebe, die bei kleinen Bohrdurchmessern höchste Präzision verlangen. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
24mm T-Slot Nut M20 DIN 508 High Strength Class 10, Height 32mm - AMF
Take advantage of standardised compatibility and high tensile performance for dependable clamping in machine tables and fixtures; order supply through Metav Werkzeuge or request technical guidance from our consultants. T-Nutenstein (DIN 508) T-nut 24 mm, M20 — AMF T-Nutenstein (DIN 508) Werksnorm T-Nut 24mm M20 AMF is a precision T-slot clamping element designed for secure fixing in 24 mm T-slots on machine tables, fixtures and modular workholding systems. Standardised DIN 508 compatibility M20 thread for high clamping force Fits 24 mm T-slots precisely Strength class 10 for robust fixation Consistent standard compliance for reliable interchangeability Conformity to DIN 508 ensures predictable fit and function when integrating this component into standard T-slot systems. The design aligns with established machine-table profiles so that replacement or expansion work proceeds without time-consuming adaptations. By using a standardised component, shops and production facilities reduce setup variability and minimise the need for bespoke parts, supporting smoother process planning and faster throughput in repetitive clamping operations. High tensile performance that reduces downtime The nut is specified in strength class 10, which indicates elevated tensile and yield properties compared with lower classes; this reduces the risk of deformation under high preload and contributes to longer service life. Dimensional data supporting precise engagement — including A: 23.7 mm, E: 40, K: 16 — helps ensure secure seating and consistent torque behaviour. For applications that demand repeatable clamp pressure and minimal loosening during cyclical loads, the robust specification offers a clear operational advantage. Practical compatibility and straightforward installation for workshop use Designed for a 24 mm T-slot and with an M20 thread, the component accepts standard M20 bolts or studs for direct connection to clamping elements or workpieces. Installation involves sliding the nut into the slot and orienting it to accept the bolt, enabling quick assembly or reconfiguration of jigs and fixtures. The compact profile and machine-compatible height (32 mm) make it suitable for confined spaces while maintaining the mechanical clearance required for reliable clamping cycles. For supply and professional advice on using AMF T-slot nuts with strength class 10, contact Metav Werkzeuge in Emmerich for tailored assistance and fast delivery: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 4000833211NW Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 24mm M20 AMF Product type: T-Nutenstein Manufacturer: AMF UID: 4000833211NW Dimensions / Core data T-slot width: 24 mm Thread: M20 Height: 32 mm Packaging unit: 1 Special features Standard: DIN 508 Addition: A: 23.7; E: 40; K: 16 Strength class: 10 FAQ What T-slot width does this nut fit? The T-nut is designed for a 24 mm T-slot and provides a precise fit for standard 24 mm machine-table profiles. Which bolt or thread size is suitable for fastening? This T-nut uses an M20 internal thread and is compatible with standard M20 bolts or studs for secure clamping. What does strength class 10 mean for application? Strength class 10 indicates higher tensile and yield capacity; this AMF T-nut offers robust fixation and reduced deformation under high preload. Is the component compliant with industry standards? Yes — the part is manufactured to DIN 508, ensuring interchangeability and predictable integration into standard T-slot systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
24x60x150mm T-Slot Plate M12x1.75 Thread SS41C Three-Point Mounting - Vertex
Take advantage of a compact fixture plate that combines precise dimensions, robust SS41C steel construction and a standard M12 x 1.75 threaded interface to simplify clamping workflows; order the plate directly via Metav Werkzeuge or ask the consultants for application advice. TP-150-24 T-slot plate by Vertex — 24 x 60 x 150 mm, SS41C steel A compact TP-150-24 T-slot plate designed for reliable fixturing and secure clamping on machine tables and modular fixtures. Compact dimensions 24 x 60 x 150 mm Robust SS41C steel construction M12 x 1.75 pitch threaded hole Weighs 1.8 kg for stable positioning Precision and rigidity for secure fixturing The compact format and straight-edged design provide a predictable datum for repeat setups, helping to reduce alignment time and variability. With its 24 x 60 x 150 mm footprint and a mass of 1.8 kg, the component offers stable positioning that dampens vibrations during light- to medium-duty machining and measuring tasks. Specifying a solid steel construction means increased resistance to bending under clamping loads; this supports consistent clamping forces and improved repeatability when assembling jigs or temporary fixtures. Compatible with standard clamping systems for versatile workflows A single threaded connection based on the M12 x 1.75 pitch enables straightforward integration with widely used clamping bolts and locating elements, allowing the plate to be combined with existing workshop hardware without custom adapters. The standard interface accelerates setup changes and reduces the number of specialised fasteners needed in the tool crib, which contributes to more efficient changeovers and less downtime between operations. The plate’s T-slot geometry also supports modular positioning and simple indexing for small jigs and tooling arrays. Built for workshop use with straightforward upkeep Constructed from SS41C structural steel, the plate balances mechanical strength with practical workshop handling. The material selection suits routine fixture tasks and is tolerant of typical workshop environments when basic corrosion prevention is observed. Cleaning and light lubrication after use are sufficient to preserve function and surface integrity. The minimalist design reduces trapping points for swarf and coolant, simplifying maintenance and extending service life under normal operating conditions. Choose Vertex precision — request the TP-150-24 through Metav Werkzeuge for prompt dispatch from Emmerich and consult our team for application-specific recommendations via info@metav-werkzeuge.com or by phone Technical data Article number: TP-150-24 GTIN: 4061905088179 Brand: Vertex Core specifications Dimensions: 24 x 60 x 150 mm Weight: 1.8 kg Thread: M12 x 1.75 eClass: 23360290 Materials & features Material: SS41C (structural steel) T-slot plate design Compact format for fixturing SKU: TP-150-24 FAQ What is the primary application of this plate? The TP-150-24 T-slot plate by Vertex is intended for small fixturing and clamping tasks on machine tables and modular fixtures where a compact datum and a standard threaded interface are required. Which fasteners fit the threaded hole? The plate uses an M12 x 1.75 thread, compatible with standard M12 clamping bolts and locating screws commonly used in workshop clamping systems. Is the plate suitable for heavy machining operations? The plate’s SS41C construction offers good rigidity for light to medium operations; for heavy or highly loaded machining, a larger or thicker fixture plate should be considered. How should the plate be maintained to ensure longevity? Regular cleaning to remove swarf and light lubrication of contact surfaces will help preserve the plate’s condition and function; the material tolerates normal workshop handling with basic corrosion prevention. Can the TP-150-24 be integrated into existing jigs? Yes — the compact dimensions and standard M12 thread make the plate straightforward to incorporate into existing jigs and modular fixture systems without special adapters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
24x60x90mm T-Slot Table Plate M12x1.75, SS41C - Vertex
Combining robust SS41C steel construction with an M12×1.75 threaded interface and compact dimensions, this T-slot plate delivers repeatable clamping and straightforward integration into fixture systems; Order the TP-90-24 T-slot plate directly via Metav Werkzeuge or ask our consultants if needed. TP-90-24 T-slot plate — M12 thread, SS41C steel by Vertex TP-90-24 T-slot plate designed for compact fixture mounting and table integration in machining and workshop environments Compact T-slot plate design M12x1.75 threaded holes for secure clamping Precision-machined surfaces for repeatability Solid SS41C steel construction Compact format that saves space on the machine table The small footprint of this component, specified as 24 x 60 x 90 mm, is tailored for installations where table real estate is limited but positional stability remains essential. At approximately 1 kg, the plate is easy to handle during setup while providing a stable foundation for clamping elements. The T-slot geometry supports common clamping configurations and allows direct integration with standard T-bolts and fixtures, reducing the need for adaptors and shortening assembly time. The compact layout is particularly useful in modular jigs and small-batch production where rapid reconfiguration is required. Material choice and machining that promote repeatable clamping Manufactured from SS41C steel, the plate balances machinability and strength to offer a reliable contact surface for fixtures. Precision machining of the seating and threaded bores ensures repeatable positioning and reduces variation between setups. The M12×1.75 threaded holes are compatible with widely used clamping hardware, enabling secure fixation without specialised fasteners. These choices contribute to reduced setup variance and fewer rejects caused by fixture movement, supporting higher process reliability in daily production. Clear specifications for planning and procurement The technical characteristics are presented to simplify specification and procurement decisions: metric thread form M12×1.75, compact 24 x 60 x 90 mm dimensions, and a nominal mass of 1 kg. Identification data such as the SKU and GTIN allow streamlined ordering and stock checking. Because the component is a straightforward mechanical part with standard interfaces, it can be integrated into existing clamping systems with minimal modification, speeding up project lead times and easing spare-parts management. Contact Metav Werkzeuge in Emmerich for stock status, delivery from the European warehouse and tailored advice on Vertex TP-90-24 T-slot plate — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TP-90-24 GTIN: 4061905094644 eClass: 23360290 Manufacturer: Vertex Facts Dimensions: 24 x 60 x 90 mm Thread: M12 x 1.75 Weight: 1 kg Special features T-slot plate geometry Material: SS41C Precision-machined threads and faces FAQ What sizes and thread form are provided with this plate? The TP-90-24 T-slot plate is supplied in a compact 24 x 60 x 90 mm format with M12×1.75 threaded holes as standard. Is the material suitable for workshop clamps and repeated use? Yes, the plate is made from SS41C steel; the Vertex TP-90-24 offers durability and machineability suited to routine clamping and repeated setups. Can this plate be integrated with standard T-bolts and fixtures? Integration is straightforward: the T-slot geometry and M12 threaded bores on the TP-90-24 match common clamping hardware and require no special adaptors. How is the TP-90-24 identified for ordering and stock control? Order and stock checks can be made using SKU TP-90-24 or GTIN 4061905094644 for precise identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25 mm Indexing Three-Point Workpiece Clamp 120x117x116mm 1° Readout - Vertex
The compact indexing head combines 1° indexing, a 25 mm mounting bore and a rugged 7.5 kg build to deliver repeatable angular positioning with minimal setup time. Benefit from precise, space-saving fixturing that speeds batch and prototype work — order via Metav Werkzeuge or consult the team for specification advice. VSI-3 Indexing Head by Vertex — 25 mm mounting bore, 1° indexing The VSI-3 is a compact parts indexing head designed for precise angular positioning in workshops and small production cells, suitable for fixturing, measurement and light machining tasks. 1° indexing increments 25 mm mounting bore Compact 120 x 117 x 116 mm footprint Robust 7.5 kg construction Accurate angular positioning for repeatable setups The VSI-3 offers 1° indexing, a mechanical step size that enables reliable division of a full rotation into repeatable angular positions. This degree step is displayed as a clear graduations value, which simplifies the selection of common indexing angles without digital aids. The result is improved repeatability during batch operations and reduced time spent on alignment checks. For operations that demand consistent angular locations — such as drilling patterns, inspection stages or light reaming — the precise step increments translate directly into fewer rejects and more predictable throughput. Compact footprint that eases integration into fixtures With external dimensions of 120 x 117 x 116 mm and a standard 25 mm mounting bore, the unit is purposely compact to fit tight fixture layouts and small machine tables. The small envelope supports efficient use of bench or machine table space while enabling straightforward mechanical coupling to existing spindles or adapters. This compactness reduces the need for complex fixturing and helps maintain clear access to the workpiece, making it suitable for both prototyping benches and limited-footprint production cells where space economy matters. Solid mass and construction for stable operation At 7.5 kg, the indexing head provides a substantial, vibration-damping mass that contributes to stable positioning under machining light loads. The noticeable mass and robust design reduce micro-movements during short machining cycles and measurement routines, increasing the quality of each indexed operation. The construction supports frequent cycle usage common in workshop environments, and the mechanical simplicity means maintenance is limited to routine checks and lubrication rather than frequent part replacement. Straightforward handling for faster cycle times The mechanical indexing principle of this head keeps operation intuitive and fast: once mounted via the 25 mm bore, indexing steps are set and locked with minimal tooling. This lowers setup complexity and shortens the time from first part to steady production. The device is particularly suitable where controlled angular positioning is required without the overhead of fully motorised rotary tables — a pragmatic balance of precision and operational speed that fits many small- to medium-scale machining and inspection workflows. Choose Vertex quality for dependable indexing: contact Metav Werkzeuge in Emmerich for technical guidance and procurement of the VSI-3 indexing head to streamline angular positioning in workshop and small production applications Technical data Article number: VSI-3 GTIN: 4061905084973 Designation: Parts indexing head (Teileapparat) Mounting bore: 25 mm Index increments: 1° Dimensions: 120 x 117 x 116 mm Weight: 7.5 kg Facts Weight: 7.5 kg Dimensions (L × W × H): 120 x 117 x 116 mm Mounting bore diameter: 25 mm Index step: 1° Special features Designation: Indexing head (Index) Manufacturer: Vertex eClass: 21020590 SKU: VSI-3 FAQ What indexing resolution does the VSI-3 provide? The VSI-3 indexing head offers 1° indexing increments, enabling reliable division of the full circle into repeatable angular positions for machining and inspection tasks. Which mounting interface is required for installation? The unit uses a 25 mm mounting bore for attachment; the design allows straightforward coupling to compatible spindles or fixture adapters commonly found in workshop setups. Is the VSI-3 suitable for light machining operations? Yes, the VSI-3 indexing head (Vertex, SKU VSI-3) is designed for light machining and fixturing where precise angular positioning and mechanical stability are required. How does the mass of the device affect performance? The 7.5 kg mass improves stability and vibration damping during short machining cycles, which supports consistent positioning and better surface quality in repetitive operations. Can the indexing head be used for inspection and measurement tasks? The compact indexing unit is suitable for inspection and measurement workflows that require repeatable angular steps, offering a robust mechanical basis for comparative checks and staged measurements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
25 mm Universal Dividing Head MT-4, Includes Tailstock, Three-Point Index Plates, 3-Jaw Plate - Vertex
High-precision indexing with a MT4 spindle taper and interchangeable dividing plates, combined with a 25 mm T-slot for secure table mounting and a robust 47.5 kg construction, ensures reliable repeatability in serial and prototype work. Order the Universal dividing head BS-2A directly via Metav Werkzeuge or ask our consultants if required. Universal dividing head BS-2A (MT4, 25 mm T-slot) by Vertex The Universal dividing head BS-2A is a compact, precision accessory for indexed machining, suitable for accurate angular division and rotary positioning on milling machines and rotary tables. *MT4 spindle taper for secure tool holding *Includes tailstock, two dividing plates and chuck *25 mm T-slot for stable table mounting *Robust 47.5 kg construction for high stability Accuracy that speeds up production The BS-2A delivers repeatable indexing through a geared dividing mechanism and supplied dividing plates, which reduce set-up time for series work. The spindle's MT4 taper provides a rigid connection to standard tooling, so concentricity and runout remain low during operation. By converting complex angle calculations into precise mechanical indexing, the head cuts adjustment time and reduces scrap rates, supporting lean production processes and consistent component quality. Stable construction for vibration-free machining A substantial mass of 47.5 kg and a mounting interface matched to a 25 mm T-slot create a steady platform that resists chatter during heavy cuts. The included tailstock increases support for long or slender workpieces, improving finish and dimensional accuracy. These characteristics make the unit well suited to both delicate indexing and tougher cutting tasks, allowing the workshop to rely on a single accessory across a range of applications without frequent rework. Ready to use with essential accessories Delivered with a complete accessory set — tailstock, two dividing plates, two brackets, a 3-jaw plate and a centre point — the device is prepared for immediate integration into the workbench or machine table. The accessory package reduces procurement steps and speeds commissioning of fixtures. Supplied as a compact unit, the head supports efficient workflow and aligns with Metav's approach to making precision tools accessible for every workshop, backed by product knowledge and reliable European distribution. Contact Metav Werkzeuge for personalised advice on the Vertex BS-2A universal dividing head and secure delivery from Emmerich am Rhein Technical data Article designation: Universal dividing head BS-2A SKU: BS-2A GTIN: 4061905090592 ECLASS: 21020590 Facts Dimensions: 202x285x237 mm Weight: 47.5 kg T-slot width: 25 mm Spindle taper: MT-4 Special features Includes tailstock Two dividing plates included Two brackets supplied 3-jaw plate included Centre point supplied FAQ How accurate is the indexing on the universal dividing head? The Universal dividing head BS-2A provides precise mechanical indexing via the supplied dividing plates, suitable for repeatable angular positioning in workshop and small-batch production. Can the device be mounted directly to a machine table? Yes, the head features a 25 mm T-slot interface designed for stable table mounting and is supplied ready for secure installation. What accessories are included with the BS-2A? Delivery includes a tailstock, two dividing plates, two brackets, a 3-jaw plate and a centre point to enable immediate use. Is the spindle compatible with standard tooling? The spindle uses an MT4 taper, which is compatible with common tooling and ensures a rigid connection for accurate machining. Which applications benefit most from this dividing head? The unit is ideal for indexing, rotary positioning and small-series milling or drilling tasks where repeatability and stability are required Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2500 N Hold Force 2000 N Pneumatic Horizontal Clamp 95° Angle Zinc-Plated - Kukamet
Take advantage of a compact, corrosion‑resistant clamping solution that combines consistent pneumatic actuation with reliable holding performance to keep fixtures accurate and cycle times short. Order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. 631 Pneumatic Clamp — galvanised, 2,000 N clamping force The 631 is a pneumatic clamp for horizontal mounting, engineered for repeatable workholding in production fixtures and workshop jigs. Robust galvanised steel construction Max. clamping force 2,000 N Holding force up to 2,500 N Horizontal-foot mount, 95° angle Predictable clamping for tighter process control A pneumatic clamp delivers fast, repeatable actuation and the 631 is no exception. The specified 2,000 N clamping force, combined with a 2,500 N holding capacity, provides measurable security for parts during machining or assembly. Consistent force application reduces rework and scrap by avoiding variable manual tightening; the result is an improvement in throughput and a more predictable production flow. The compressed-air operation enables short cycle times and reliable repeatability in automated or semi-automated fixtures. Space-saving design with corrosion protection The unit’s galvanised finish ensures basic corrosion resistance for industrial environments where humidity or occasional coolant exposure is present. With a compact mass of 1.1 kg and a horizontal foot mounting arrangement, the clamp integrates into confined fixtures without adding unnecessary bulk. The 95° actuation angle helps position the clamping arm clear of the workpiece when released, simplifying loading and unloading. These design choices make the clamp suitable for tightly packed jigs where both footprint and corrosion resistance matter. Robust construction for workshop and production use Built for continuous use in repetitive operations, the clamp combines a durable surface treatment with sturdy mechanics for extended service life. The pneumatic actuation removes the variability of manual clamping, supporting quality assurance in batch production and short-cycle assembly. The product is identified as SKU 631-3 and pairs readily with standard pneumatic systems; integration is straightforward for engineers specifying fixture hardware. For buyers seeking dependable, low-maintenance clamping, this option supports streamlined assembly and machining processes. For reliable, repeatable clamping choose the Kukamet 631 via Metav Werkzeuge — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 631-3 GTIN: 8680731503012 Facts Clamping force: 2,000 N Holding force: 2,500 N Weight: 1.1 kg Actuation angle: 95° ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Category: pneumatic clamp Brand: Kukamet FAQ What maximum clamping force does this clamp provide? The Kukamet 631 pneumatic clamp provides a clamping force of 2,000 N and a holding capacity of 2,500 N for secure part fixation. How is the clamp mounted in a fixture? The clamp uses a horizontal foot mounting configuration, enabling low‑profile installation in jigs and fixtures. Is the surface treated against corrosion? The unit is galvanised, offering basic corrosion protection suitable for many workshop and production environments. What is the actuation angle of the clamping arm? The clamp operates with a 95° actuation angle, allowing the arm to clear the workpiece when released. Which SKU identifies this product? This item is supplied as SKU 631-3 and is intended for use in pneumatic clamping installations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Hold Force Vertical Clamp 2000 N Closing Force Stainless Steel - Kukamet
Take advantage of a compact, stainless steel design with up to 2,000 N clamping capacity and a high holding force for dependable fixturing; order the Vertikalspanner 212 directly via Metav Werkzeuge or consult our advisors for application support. Vertikalspanner 212 – Vertical clamp with M8x50 pressure spindle, stainless steel (Kukamet) The Vertikalspanner 212 is a compact vertical clamp designed for secure workpiece holding in milling and general workshop fixturing. Compact stainless-steel design Clamping force up to 2,000 N Holding force up to 2,500 N Faster, safer clamping for small-scale production The lightweight vertical clamping solution combines a robust stainless steel construction with a defined clamping force of 2,000 N, offering consistent grip during machining and handling. The specified clamping value refers to the axial force applied by the pressure spindle; this ensures predictable part stability under load. For production environments where repeatability matters, the reliable clamping parameter reduces set-up time and rejects due to slippage, improving process efficiency and throughput. Simple integration and quick set-up on fixtures Designed for vertical-base mounting, the device features an M8x50 pressure spindle that permits fine actuation and easy adjustment when securing a workpiece. The vertical base attachment enables installation on standard fixture plates and modular tooling systems without complex modifications. At approximately 0.415 kg, the clamp is light enough for reconfiguration yet rigid enough for precision tasks, making it suitable for machine tables, jigs and small batch fixtures where flexibility and uptime are priorities. Low maintenance and corrosion resistance for long service life Made from stainless steel, the clamp resists corrosion in humid or coolant-exposed environments, which reduces maintenance intervals and replacement cycles. The distinction between clamping force and holding force is important here: while the clamping force is the adjustable active pressure, the higher holding force indicates the maximum retained load under shear or pull conditions. This combination delivers operational confidence and lowers the risk of unexpected downtime, supporting a steady production flow and protecting operator investment in tooling. Choose the Kukamet Vertikalspanner 212 for dependable 2,000 N performance — contact Metav Werkzeuge for procurement and technical advice from Emmerich’s quality filter. Technical data SKU: S212-3 GTIN: 8680731509229 Material: stainless steel Weight: 0.415 kg Manufacturer: Kukamet Numbers Maximum clamping force: 2,000 N Maximum holding force: 2,500 N Pressure spindle: M8x50 ECLASS: 21041717 ETIM: EC011973 Special features Vertical base mounting Compact vertical clamp design Suitable for workshop and milling fixturing FAQ What is the maximum clamping force of this clamp? The Vertikalspanner 212 provides a maximum clamping force of 2,000 N, quoted as the axial pressure applied by the M8x50 spindle. Can the clamp withstand lateral loads while holding a workpiece? Yes; the specified holding force for the Vertikalspanner 212 is 2,500 N, indicating the maximum retained load under shear or pull conditions. Is the material suitable for use with coolants and humid environments? Constructed from stainless steel, the clamp is corrosion-resistant and well suited to coolant-exposed machining and workshop environments. How is the clamp mounted to a fixture plate? The unit uses a vertical base mounting arrangement, enabling secure attachment to standard fixture plates and modular tooling systems. What dimensions are relevant for integration in a jig or fixture? Key values for integration are the M8x50 pressure spindle, the compact form factor and the weight of 0.415 kg, which together inform clearance and load considerations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Hold Force Vertical Clamp 2000 N Thrust, M8x50 Thread, Angle Base - Kukamet
Take advantage of the combination of compact design, robust holding capacity and flexible mounting for reliable clamping in fixtures; order the product directly via Metav Werkzeuge or consult the specialists for application advice. Kukamet Vertikalspanner 213 — vertical clamp with M8x50 pressure spindle and angle-foot mounting The Kukamet Vertikalspanner 213 is a compact vertical clamp designed for secure, repeatable holding in jigs and fixture systems across light industrial and workshop environments Compact vertical clamp design Angle-foot mounting for flexible fixing M8x50 pressure spindle Holding force up to 2,500 N Consistent, repeatable clamping to speed production The clamp delivers repeatable holding through a simple, direct-action mechanism that reduces setup variation. With a clamping force of 2,000 N and a static holding capacity of 2,500 N, the unit provides a quantifiable foundation for routine machining and assembly tasks where stability matters. The clear numerical performance indicators allow process planners to integrate the clamp into existing fixtures with predictable results, reducing rework and downtime while supporting lean production practices. Space-saving mounting that adapts to many fixtures Thanks to the angle foot mounting, the device can be secured in constrained spaces and oriented for optimal access to the workpiece. The low mass of 0.47 kg and the compact footprint make the clamp suited to both manual jigs and automated stations where minimising bulk is important. The mounting type supports straightforward alignment and ensures the clamp sits solidly under load, making it an effective choice for small-batch production and maintenance work where flexibility is required. Durable finish and straightforward maintenance for workshop use Finished in a blackened finish that resists surface corrosion, the clamp is shaped for daily use in workshop conditions. The M8x50 pressure spindle is a standard, serviceable size that simplifies replacement and reduces spare-part complexity. Material and finish choices are engineered for robustness rather than cosmetic appeal, delivering a component that holds up across repetitive cycles and requires only routine inspection rather than specialised servicing. Contact Metav Werkzeuge for tailored mounting advice or to arrange supply directly from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B213-3 GTIN: 8680731507980 eClass: 21041717 ETIM: EC011973 Facts Weight: 0.47 kg Clamping force (max): 2,000 N Holding force (max): 2,500 N Special features Designation: Vertikalspanner 213 Mounting: Angle foot Pressure spindle: M8x50 Finish: Blackened finish FAQ How much clamping force does the vertical clamp provide? The Kukamet Vertikalspanner 213 offers a clamping force of up to 2,000 N with a holding capacity reaching 2,500 N, suitable for many light industrial applications. Is the spindle size standard for easy replacement? Yes, the M8x50 pressure spindle is a common size and can be replaced without special tools when used in the Vertikalspanner 213. Can the clamp be mounted in tight fixture arrangements? The angle-foot mounting allows the clamp to be secured in confined spaces and on angled surfaces, making it adaptable to compact fixtures. What finish does the clamp have and how does that affect durability? The unit has a blackened finish that offers surface protection against corrosion and is intended for routine workshop environments. Does the clamp suit both manual and automated jigs? The compact design and quantified holding figures make this vertical clamp appropriate for manual jigs and for integration into small automated stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Hold Force Vertical Clamp Waagerechter Foot, Stainless Steel - Kukamet
Take advantage of a robust combination of stainless-steel durability and proven clamping performance — the device delivers up to 2,000 N clamping force with a 2,500 N holding capacity, making it suitable for reliable fixture work in industrial and workshop environments. Order directly via Metav Werkzeuge or contact our consultants for application advice. Kukamet Vertical clamp 211 — stainless steel vertical clamp, 2,000 N clamping force Vertical clamp 211 is a compact stainless-steel fixture clamp for secure workholding, designed for horizontal-foot mounting and simple integration into jigs and benches. Stainless steel construction 2,000 N maximum clamping force 2,500 N maximum holding force Horizontal-foot mounting, M8x50 spindle Reliable clamping where repeatability matters The compact vertical fixture delivers consistent clamping through a M8x50 pressure spindle, providing controlled force transfer for repeatable setups. Constructed from stainless steel, the device resists corrosion and maintains accuracy in humid or oil-prone environments, reducing downtime for maintenance. The combination of 2,000 N clamping force and 2,500 N holding capacity supports medium-duty assembly and machining tasks, improving process stability and reducing the need for rework. Easy integration and stable mounting for jig systems Designed with a horizontal-foot mounting, the clamp offers straightforward attachment to flat plates, subplates or bench fixtures. Its low profile and compact form factor simplify layout planning and allow multiple clamps to be installed in tight patterns, increasing workpiece stability without adding bulk. The stainless construction and standard spindle thread mean the device integrates with common workshop tooling and can be replaced or upgraded without revising existing fixturing. Durability and practical benefits in everyday workshop use At a weight of approximately 0.415 kg, the clamping device balances robustness with manageable mass for fixture design. The corrosion-resistant finish and simple spindle mechanism minimise service intervals and keep total cost of ownership low. For operations that prioritise uptime, the clamp provides an efficient, maintenance-light solution: fewer interruptions, consistent contact pressure and dependable holding during light machining and assembly tasks. For reliable stainless-steel clamping choose the Kukamet 211 vertical clamp — contact Metav Werkzeuge for technical advice or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: S211-3 GTIN: 8680731504019 Manufacturer: Kukamet Facts Weight: 0.415 kg Maximum clamping force: 2000 N Maximum holding force: 2500 N Special features Material: stainless steel Pressure spindle: M8x50 Mounting: horizontal-foot Category: clamp / fixture FAQ What clamping and holding forces does this clamp provide? The Kukamet Vertical clamp 211 (SKU S211-3) offers a maximum clamping force of 2,000 N and a maximum holding capacity of 2,500 N. Is the clamp suitable for corrosive workshop environments? Yes, the body is made from stainless steel, so the Vertical clamp 211 is resistant to corrosion and suited to conditions where moisture or cutting fluids are present. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot fitted to flat surfaces; the design allows secure attachment to bench plates and subplates for jig systems. What spindle specification does the device use? The clamp uses an M8x50 pressure spindle, providing adjustable contact pressure and compatibility with standard workshop replacement parts. Can the clamp be used in a multi-clamp fixture layout? Yes, the compact dimensions and horizontal-foot mounting make the device suitable for closely spaced clamp arrays to improve workpiece stability. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Holding Force Horizontal Pneumatic Clamp 95° Angle, Zinc-Plated - Kukamet
Take advantage of a compact pneumatic toggle clamp that pairs 2000 N clamping force with a 2500 N holding capacity for reliable fixture security; the galvanised finish reduces corrosion and keeps maintenance low. Order directly via Metav Werkzeuge or consult the team for integration advice to maintain steady production flow. Pneumatic Toggle Clamp 611 — Kukamet | 2000 N clamping force, galvanised The Pneumatic Toggle Clamp 611 is a pneumatic clamping solution with a horizontal foot mounting, designed for medium-duty fixture and jig applications in production environments. 2000 N clamping force 2500 N holding force Galvanised corrosion resistance Horizontal foot mounting, 95° toggle Consistent, measurable clamping performance for production lines The clamp delivers a repeatable 2000 N clamping force and a 2500 N holding force, ensuring components remain secure during machining and assembly. The numerical specifications enable planners to calculate safety margins and fixture layouts precisely: clamping force refers to the active force applied to the workpiece, while holding force indicates the maximum static retention capacity. With a nominal mass of 0.86 kg, the unit imposes negligible load on moving fixture plates, supporting faster cycle times and predictable process control. Compact design that simplifies fixture integration A low-profile, horizontal foot mounting makes the unit suitable for confined jigs and automated workstations. The 95° toggle angle provides a clear open/closed position for straightforward control logic in pneumatic circuits. Because the clamp is a pneumatic toggle clamp, it integrates with standard compressed-air systems and can be mounted in arrays without significant spatial penalty, helping to reduce setup time and optimise floor space in busy production cells. Durable finish and low maintenance for industrial use The galvanised surface treatment improves resistance to humidity and coolant exposure, lowering the frequency of preventative maintenance. Materials and finish were selected to provide stable performance under repeated actuation, which supports a longer service life and fewer unplanned stops. In practice, this means reduced downtime and a smaller maintenance burden for workshop teams who require dependable clamping over many cycles. Clear applications and practical benefits for workshops Engineered for fixture, jig and assembly use, the clamp suits medium-duty metalworking and general workshop tasks where reliable holding is necessary without heavy structural mass. The pneumatic actuation removes manual effort from frequent clamping operations, contributing to ergonomic improvements and consistent part quality. When process engineers require a compact, quantifiable clamping solution that fits into existing pneumatic infrastructure, this clamp offers a balance of performance, corrosion resistance and straightforward mechanical integration. For technical advice, integration support or to order the Kukamet Pneumatic Toggle Clamp 611, contact Metav Werkzeuge for precise guidance and reliable supply from Emmerich. Technical data Article number: 611-3 GTIN: 8680731502909 Category: Spanner Manufacturer: Kukamet Core specifications Clamping force (max): 2000 N Holding force (max): 2500 N Angle: 95° Weight: 0.86 kg Special features Mounting: horizontal foot Material: galvanised Actuation type: pneumatic toggle clamp Arm: not applicable FAQ Which production tasks is this clamp best suited for? The clamp is suited for fixture, jig and assembly tasks where a measurable 2000 N clamping force and 2500 N holding force ensure stable part retention during machining and handling. How does the galvanised finish affect service life? Galvanised coating improves corrosion resistance and reduces maintenance intervals for the clamp, helping to preserve reliable operation in workshop environments. Can the clamp be integrated into existing pneumatic setups? Yes, as a pneumatic toggle clamp the unit connects to standard compressed-air systems and is designed for straightforward integration into automated workstations. What is the difference between clamping force and holding force? Clamping force denotes the active pressure applied to the workpiece (2000 N), while holding force is the maximum static retention capacity (2500 N); both values help in selecting appropriate fixturing for specific processes. Is the clamp suitable for tight fixture spaces? With a horizontal foot mounting and a compact mass of 0.86 kg, the clamp is intended for confined jigs and arrays where space optimisation is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Holding Force U-Base Toggle Clamp With Hook, Zinc Plated, 41mm Thread Length - Kukamet
Combine galvanised construction with a holding force of 2,500 N and a secure U-base to ensure reliable, repeatable fixture clamping; order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 413 — Hook latch clamp, galvanised, U-base (Kukamet) A Latch clamp 413 for secure fastening of jigs and fixtures, designed as a hook-type closure with a U-base for stable mounting. Galvanised steel construction Holding force 2,500 N U-base mounting for stable fit Integrated hook and 41 mm thread Heavy-duty performance where it matters The latch is engineered for demanding clamping tasks, offering a holding force of 2,500 N and a pressing force of 2,000 N, which together provide a clear performance advantage in repetitive assembly and fixturing applications. The lever-style mechanism translates operator motion into consistent clamping pressure, reducing setup variability. By specifying the force values, this closure clamp allows planners to match the component tolerances and fixture design to a defined load class, supporting predictable production processes and fewer reworks. Robust mounting and compact dimensions Designed for straightforward integration, the model features a U-base mounting style that ensures lateral stability on fixture plates and frames. The 41 mm thread length permits secure adjustment and fine alignment of the hook engagement, while the unit weight of 0.285 kg keeps the component lightweight without compromising rigidity. These measurable attributes translate into easier positioning in fixtures and predictable mechanical behaviour under load, simplifying both initial installation and later modifications to tooling layouts. Corrosion resistance and serviceability for long runs Constructed from galvanised steel, the closure resists surface corrosion in workshop environments, extending service life and reducing maintenance frequency. Galvanising provides a protective zinc layer that slows oxidation compared with untreated steel; where occasional lubrication or inspection is scheduled, the protective coating supports continued reliable operation. The hook-type design allows quick engagement and disengagement, maintaining production flow while keeping clamp service needs minimal and easy to plan. Practical applications and operational benefits Suitable for fixture building, transport lids, access panels and repeatable assembly operations, this hook latch clamp shortens cycle times by enabling fast, repeatable securing and release. Integration into jigs benefits from the clearly stated force ratings and compact footprint, which together reduce the need for oversized fixtures and enable closer component positioning. The combination of consistent clamping force and corrosion-resistant finish supports uptime and gives operators confidence in handling and repeatability during continuous production shifts. For ordering, specification checks or technical advice on the Kukamet hook latch clamp, contact Metav Werkzeuge for direct assistance and reliable supply from Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 413-3 GTIN: 8680731502589 ECLASS: 21041718 ETIM: EC011973 Facts Weight: 0.285 kg Pressing force (max): 2,000 N Holding force (max): 2,500 N Thread length: 41 mm Special features Material: galvanised steel Mounting: U-base (U-Fuß) With hook SKU: 413-3 FAQ What load capacities does this clamp provide? The Latch clamp 413 (Kukamet, SKU 413-3) provides a maximum holding force of 2,500 N and a pressing force of 2,000 N, specified for predictable fixture loading. Is this clamp suitable for outdoor or humid workshop conditions? The galvanised finish on the Kukamet latch clamp offers improved corrosion resistance, making it suitable for humid workshop environments though not a substitute for stainless steel in highly corrosive settings. How is the latch fastened to a fixture plate? The clamp uses a U-base mounting arrangement; the U-base allows stable attachment to fixture plates and frames and the 41 mm thread length permits fine adjustment of the hook engagement. What maintenance does the hook latch require? Routine visual inspection and light lubrication at pivot points are recommended for the Kukamet hook latch clamp to preserve smooth lever action and prolong the galvanised finish. Which applications are typical for this hook-type latch clamp? Typical uses include jigs and fixtures, transport closures, access panels and repeatable assembly tasks where fast, repeatable securing is required; the Latch clamp 413 is specified for such applications due to its force ratings and compact design. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Horizontal Toggle Clamp With Hook, 41mm Thread Length, Zinc Plated - Kukamet
Benefit from a compact, galvanised latch clamp that combines a 2,500 N holding force with a low mass of 0.32 kg for reliable fixture retention and easy handling; order the latch clamp directly via Metav Werkzeuge or ask our consultants if needed. Latch Clamp 421 — Horizontal base toggle latch with hook, galvanised, Kukamet The Latch Clamp 421 is a compact horizontal toggle clamp designed for secure fixturing in jigs and fixtures where a hooked closure and reliable holding force are required. Galvanised steel construction for corrosion resistance 2,500 N maximum holding force for secure retention Horizontal base mounting for easy fixture integration Hook closure with 41 mm thread length for adjustment Faster, more reliable clamping for production workflows The compact toggle design delivers consistent clamping action while keeping set-up times to a minimum. With a 2,000 N clamping force and a 2,500 N holding force, this latch provides a clear margin between applied pressure and the force required to resist release, enhancing safety and repeatability on production lines. The horizontal-foot mounting enables stable attachment to fixture plates, while the hook closure secures parts without additional locking elements. These characteristics combine to reduce the need for rework and support predictable cycle times in both small-batch and serial operations. Durable, low-maintenance construction that stands up to shop environments Manufactured from galvanised material, the clamp is protected against corrosion for prolonged service life in workshop and light industrial settings. The lightweight body at 0.32 kg eases handling during assembly or retrofitting of fixtures, yet the component maintains robust mechanical performance. The 41 mm thread length allows fine adjustment of the hook position for precise engagement, making the latch suitable for components with minor dimensional variations. Where longevity and low upkeep are priorities, this latch reduces replacement frequency and maintenance effort. Integrates simply into existing jigs and tooling with predictable behaviour The horizontal base and hooked closure simplify retrofitting into existing tooling arrangements: the mounting foot provides a secure reference, while the lever action ensures quick engagement and disengagement for repetitive tasks. The compact footprint supports dense tooling layouts without obstructing adjacent operations. As a general-purpose toggle latch, it is suitable for clamp-and-release workflows in assembly, fixture building and light manufacturing, offering consistent holding performance and simple mechanical adjustment for process optimisation. For dependable jigs and fixtures, choose the Kukamet Latch Clamp 421 — contact Metav Werkzeuge in Emmerich for purchasing and technical advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 421-3 GTIN: 8680731502596 ECLASS: 21041718 ETIM: EC011973 Numbers / Core technical data Weight: 0.32 kg Clamping force (max): 2,000 N Holding force (max): 2,500 N Thread length: 41 mm Designs / Special features Material: galvanised steel Mounting: horizontal base Closure type: hook SKU: 421-3 With hook: yes FAQ What is the main advantage of this latch for fixture work? The latch offers a compact solution with a 2,500 N holding force, making the Kukamet latch clamp 421 suitable where secure, repeatable retention and quick operation are required. Can the clamp be adjusted to accommodate different part heights? Yes, adjustment is possible via the 41 mm thread length on the hook, allowing the latch to be fine-tuned for slight variations in component height. Is the material suitable for humid or workshop environments? The galvanised construction of the latch clamp 421 provides corrosion resistance, which improves durability in humid or general workshop conditions. How is the latch mounted to a fixture plate? The clamp uses a horizontal base mounting arrangement that provides a stable reference for attachment to fixture plates and jigs. What are the typical applications for this type of toggle latch? Common uses include jigs and fixtures for assembly, light manufacturing and repair benches where a hooked closure and quick, repeatable clamping are needed for process efficiency. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2500 N Pneumatic Clamp Horizontal Base, 90° Three-Point, Zinc-Plated, Max Hold 9000 N - Kukamet
Take advantage of a galvanised, heavy‑duty design with a pneumatic cylinder for fast, repeatable clamping and a compact 90° orientation that saves fixture space; order reliably via Metav Werkzeuge or consult their specialists for integration advice. Pneumatic toggle clamp 682 — Kukamet, horizontal foot, 2.5 kN cylinder Pneumatic toggle clamp 682 is a pneumatically actuated toggle clamp designed for fixtures and jigs where rapid, consistent clamping is required Pneumatic actuation, 2,500 N cylinder force Horizontal foot for secure fixture mounting Galvanised finish for corrosion resistance Maximum holding force 9,000 N Faster cycles through consistent pneumatic actuation The integrated pneumatic cylinder delivers a controlled actuation impulse with a rated 2,500 N actuation force, producing highly repeatable clamp strokes. This consistency reduces variation between cycles and supports faster machine throughput by replacing manual clamping steps with automated motion. The pneumatic drive is suitable for repeated cycling in production settings and simplifies process timing by providing a predictable clamp response. Secure retention combined with robust corrosion protection A substantial holding force of 9,000 N ensures components remain fixed under load, reducing rework and downtime due to part movement. The galvanised finish protects exposed steel surfaces from corrosion in standard workshop environments, extending service life and preserving clamp geometry for steady clamping accuracy. The compact 90° arrangement helps to position workpieces reliably while maintaining a small footprint on the fixture. Straightforward mounting and low-maintenance operation Fitted with a horizontal foot for direct fixture attachment, this clamp integrates easily into jigs and workholding plates without complex adapters. At approximately 5.59 kg, the unit offers a stable base while remaining manageable for installation or relocation within a production cell. Pneumatic actuation reduces operator exertion and wear on manual levers, contributing to low maintenance demands and consistent cycle performance over time. Contact Metav Werkzeuge for technical selection and dependable supply of Kukamet pneumatic toggle clamps; the Emmerich team will advise on integration, availability and suitable fixture arrangements. Technical Data Article number: 682-4 GTIN: 8680731505139 Brand: Kukamet ECLASS: 21021004 ETIM: EC011973 Facts Weight: 5.59 kg Cylinder force: 2,500 N Maximum holding force: 9,000 N Clamp angle: 90° Special features Material: galvanised With pneumatic cylinder Mounting: horizontal foot Category: Clamps FAQ What forces are specified for actuation and holding? The clamp provides an actuation (cylinder) force of 2,500 N and a maximum holding force of 9,000 N for the Kukamet pneumatic toggle clamp 682-4, indicating strong retention once engaged. How is the clamp mounted to a fixture? Mounting is by a horizontal foot configuration, allowing the unit to be bolted directly to jigs or workholding plates for a stable clamp interface. Does the finish protect against corrosion? The galvanised finish on the Kukamet unit offers enhanced corrosion resistance for workshop and industrial environments, helping to preserve function and service life. What pneumatic supply details are required? The clamp is pneumatically actuated; specific operating pressure and flow requirements depend on the application and should be taken from the product’s technical documentation for safe and efficient use. What routine maintenance is recommended? Regular inspection of pivot points and pneumatic fittings, plus periodic lubrication of moving joints, will help maintain clamping performance and prolong service intervals for the Kukamet pneumatic toggle clamp 682-4. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com