Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
22x12mm Flange M10x1.5mm Thread - Vertex
Taking advantage of compact dimensions, a standard metric M10x1.5 thread and an ultralight construction, this flange supports precise, low-mass assemblies and simple retrofits. Order the part directly via Metav Werkzeuge or ask the consultants for tailored advice. Flange – compact mounting part with M10x1.5 thread (Vertex) The Flange serves as a compact mounting element for small assemblies and fixtures, offering a standard metric thread and a low mass for applications with restricted space. Compact 22 x 12 mm footprint M10x1.5 metric thread compatibility Lightweight 23 g for low-mass assemblies Space-saving mounting for tight assemblies The compact 22 x 12 mm footprint and the minimal mass of 0.023 kg make this component ideal where space and weight are limited. The small form factor reduces intrusion into assemblies and allows closer placement of adjacent parts, which is especially relevant for jigs, fixtures and precision subassemblies. The lightweight nature contributes to lower inertial loads during dynamic operation, supporting smoother motion and reduced wear on connected components, while keeping handling and storage simple. Standard metric thread for broad compatibility Equipped with a M10x1.5 thread, the part is compatible with a wide range of commonly available metric fasteners and mating components. The M10x1.5 designation indicates a 10 mm nominal diameter with a 1.5 mm pitch; this standardisation simplifies procurement and replacement, reducing downtime in production or maintenance operations. The clear specification of the thread enables straightforward integration into existing designs and fixtures without the need for special adapters. Reliable sourcing and simplified inventory management Branded by Vertex and listed as SKU 4513, this flange is supplied ready for immediate use in manufacturing and maintenance contexts. The compact packaging and low weight decrease storage footprint and handling costs, while clear identification via GTIN supports traceability and order control. Metav Werkzeuge provides a consistent supply chain presence from Emmerich, backed by a reputation for bringing high-precision components within reach of workshops and trade customers, underlining reliability for small and mid-sized operations. For direct procurement of the Vertex flange or for further clarification on technical compatibility, contact Metav Werkzeuge — available via info@metav-werkzeuge.com or +49 2822 7131930 — to place an order or request documentation. Technical data Article number: 4513 GTIN: 4061905090424 Brand: Vertex Dimensions: 22 x 12 mm Thread: M10 x 1.5 mm Weight: 0.023 kg Numbers / Core technical data Weight: 0.023 kg Nominal diameter: 10 mm Thread pitch: 1.5 mm Dimensions: 22 x 12 mm GTIN numeric code: 4061905090424 Special features / Versions Standard metric thread for broad compatibility Compact footprint for tight installation spaces Low mass suitable for low-inertia assemblies Supplied as SKU 4513 for inventory control FAQ What are the exact dimensions of the part? The flange has dimensions of 22 x 12 mm as stated in the product data. Which thread specification is used? The component uses a M10x1.5 metric thread, corresponding to a 10 mm diameter with a 1.5 mm pitch. Is this suitable for precision fixture work? Yes, the compact design and low weight of the flange support precision fixture and small assembly applications when a standard metric connection is required. How is the product identified for ordering? The item is listed as SKU 4513 and is associated with GTIN 4061905090424, facilitating clear reordering and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
22x12mm Flange With 3/8-16" Thread, 23g - Vertex
Take advantage of the combination of a standard 3/8-16" threading, compact 22 × 12 mm dimensions and a lightweight 0.023 kg construction for reliable, low-mass installations; order the component directly via Metav Werkzeuge or consult the Metav team for application advice. Flange 4513I — 3/8-16" thread, 22 × 12 mm (Vertex) The Flange 4513I is a compact threaded flange intended for mechanical assemblies and fixtures where a standard 3/8-16" thread and a small footprint are required. Compact 22 × 12 mm footprint Standard 3/8-16" thread pattern Lightweight 0.023 kg for reduced mass Secure, standardised connection for mechanical assemblies The flange provides a standard 3/8-16" thread that simplifies component matching and reduces the need for bespoke fasteners; compatibility with common thread systems supports fast interchangeability and fewer inventory variants. Where stable mechanical joining is required, the presence of a recognised thread form offers predictable torque behaviour and repeatable clamping performance. This makes the component particularly suitable for fixtures and assemblies that rely on familiar, industry-standard connection methods to maintain uptime and simplify maintenance. Space-saving design that lowers dynamic load A compact 22 × 12 mm footprint combined with a 0.023 kg mass reduces bulk and rotational inertia in moving assemblies. The small size allows integration into confined spaces and light-weight constructions without compromising basic mechanical function. Reduced mass benefits dynamic systems by lowering the energy required to accelerate components and by decreasing wear on bearings and drives. The physical proportions make the flange a pragmatic choice where installation space is constrained but a reliable threaded connection remains essential. Traceability and procurement advantages for production environments Marked with SKU 4513I and GTIN 4061905094392, the component supports straightforward procurement and inventory control. Supplied under the Vertex range, the part benefits from manufacturer traceability and consistent production standards, which aids quality assurance workflows. Spec sheets and SKU-level tracking facilitate audit trails and simplify reordering in industrial supply chains. Combined with Metav’s role as a European quality filter, the component integrates into procurement processes that prioritise precision and reliability for workshop and industrial usage. Contact Metav Werkzeuge for a technical review of fit and compatibility or to request procurement details for Vertex components such as this flange — Metav’s consultants provide specification guidance and order handling from their Emmerich facility Technical data Article number: 4513I GTIN: 4061905094392 Manufacturer: Vertex Measured values Dimensions: 22 × 12 mm Weight: 0.023 kg Thread: 3/8-16" Features & versions Brand: Vertex EClass: 37029205 SKU: 4513I FAQ What thread does this flange use? The flange uses a standard 3/8-16" thread, specified for mechanical assemblies requiring that thread form. What are the physical dimensions of the part? Dimensions are 22 × 12 mm, providing a compact footprint for tight installation spaces. How much does the flange weigh? The component weighs 0.023 kg, making it suitable for applications where low mass is beneficial. Is the part traceable for procurement? Yes — the flange is listed as SKU 4513I and carries GTIN 4061905094392 to support procurement and inventory management. Which manufacturer produces this flange? The flange is manufactured by Vertex and is offered through Metav Werkzeuge as part of their industrial components range. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
22x42x26mm T-Slot Clamping Pad Set, 4 Pieces - Vertex
Take advantage of compact, secure clamping and a ready-to-fit set of four for efficient fixturing in small-scale machining. Benefit from precise dimensions and lightweight handling to speed set-up and reduce changeover times. Order the clamping set directly via Metav Werkzeuge or consult the team for technical matching. CK-3716 T-slot clamping jaws – set of 4, 22×42×26 mm by Vertex A compact CK-3716 set of T-slot clamping jaws designed for precise workholding in machine-shop fixturing and general workshop clamping applications. Secure T-slot clamping for reliable hold Set of 4 for flexible fixturing Compact dimensions 22×42×26 mm Weight 0.7 kg for easy handling Secure hold for precision setups The T-slot geometry provides a reliable mechanical engagement that keeps workpieces stable during machining and light milling operations. With clearly defined dimensions of 22×42×26 mm, the jaws occupy minimal table space while delivering a firm contact area for consistent results. The reduced handling mass, documented as 0.7 kg, supports quick repositioning and lowers the effort required during fixture changes, contributing to shorter cycle times and higher shop-floor productivity. Ready-to-use set for flexible fixturing Delivered as a set of 4, the clamping jaws enable common multi-point clamping patterns without the need for immediate additional purchases. This configuration simplifies inventory and reduces set-up complexity for batch runs or prototype work. The compact format supports modular fixturing, allowing reconfiguration for varied part geometries; the practical advantage is fewer tool changes and more repeatable clamped positions, which translates into measurable time savings per job. Simple integration and dependable workshop partner Designed for T-slot tables and standard machine fixtures, the jaws offer straightforward integration into existing clamping systems and vice versa. Their lightweight yet solid presence on the table aids fast installation and removal, making them suitable for busy benches and light production cells. Sourcing via Vertex through Metav Werkzeuge ensures a dependable supply chain and the reassurance of a supplier acting as a quality filter for the European market. For secure, compact fixturing order the Vertex CK-3716 T-slot clamping jaw set via Metav Werkzeuge — contact Metav's consultants for specification matching and fast delivery from Emmerich. Technical data Article number: CK-3716 GTIN: 4061905088124 Product type: T-slot clamping jaws (set) Facts Dimensions: 22×42×26 mm Weight: 0.7 kg Pieces per set: 4 Special features Delivered as a set Manufacturer: Vertex Compact form factor for tight fixtures FAQ What is included in the delivery of the clamping set? The delivery contains the CK-3716 T-slot clamping jaws as a set of four pieces for immediate use in fixturing and clamping tasks. Are these jaws suitable for standard T-slots? Yes, the CK-3716 clamping jaws are designed for engagement with standard T-slot tables and general-purpose machine fixtures. How heavy is the complete set? The complete set has a documented weight of 0.7 kg, which facilitates easy handling and fast repositioning on the workbench. Can the set be used for multi-point clamping setups? The four-piece configuration supports common multi-point clamping arrangements and modular fixturing for varied part geometries. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
22x60x90mm T-Slot Plate With M12x1.75 Thread, Steel SS41C - Vertex
Take advantage of the combination of robust SS41C construction, compact dimensions and a standard M12 x 1.75 thread to secure reliable clamping and repeatable alignment on T-slot worktables; order the TP-90-22 directly via Metav Werkzeuge or ask our consultants for specification support. TP-90-22 T-slot plate with M12 thread, compact 22 x 60 x 90 mm TP-90-22 is a compact T-slot plate designed for secure local clamping and fixture mounting on machine tables and jigs, ideal for workshops and precision production environments. Compact T-slot plate 22 x 60 x 90 mm M12 x 1.75 thread for secure fastening Made from SS41C structural steel Robust 0.9 kg mass for stable clamping Stable, repeatable clamping for precise set-ups A compact T-slot plate delivers consistent workpiece support and helps avoid movement during machining or inspection. The combination of precise dimensions and a measurable mass of 0.9 kg reduces vibration and improves positional stability, which directly contributes to repeatable results in batch production. A T-slot accessory of this kind is used to localise clamping forces and to ensure that fixtures stay aligned across multiple cycles, reducing rework and saving machining time. Durable construction that endures workshop conditions Constructed from SS41C, this plate prioritises mechanical strength and workshop resilience. The material choice supports robust contact surfaces and resists deformation under clamping loads, preserving flatness and functional geometry over time. For operators unfamiliar with steel grades, SS41C indicates a general structural steel suitable for machined components; this means the component is designed for everyday industrial use without specialised handling. The result is a long service life and stable performance in demanding environments. Fast, standardised mounting and easy integration The integrated M12 x 1.75 thread provides a widely used metric fixing that fits standard clamping bolts and studs, facilitating rapid assembly into existing tooling systems. The 1.75 mm pitch corresponds to the standard coarse thread for M12 fasteners, ensuring compatibility with off-the-shelf hardware and simplifying inventory management. Because the plate adheres to common mechanical interfaces, it can be added to fixtures or replaced quickly, minimising machine downtime and improving operational efficiency. Versatile use across fixtures and jigs Designed for direct use on T-slot tables, this plate supports a variety of clamping strategies in small-batch and serial production. Its compact dimensions make it suitable where space is limited or where multiple plates must be arranged close together to support irregularly shaped components. The SKU TP-90-22 is particularly useful for teams seeking modularity in fixture design: plates can be spaced and combined to create bespoke support patterns while maintaining a consistent reference surface. Speak with Metav Werkzeuge in Emmerich for tailored advice on integrating the TP-90-22 into existing fixtures and to arrange procurement through our supply channel. Technical data Article number: TP-90-22 GTIN: 4061905091469 Manufacturer: Vertex Facts Dimensions: 22 x 60 x 90 mm Weight: 0.9 kg Thread: M12 x 1.75 Special features Material: SS41C ECLASS: 23360290 Intended for use as a T-slot plate on machine tables FAQ What is the primary application of this plate? The plate is intended as a T-slot accessory for secure local clamping on machine tables and jigs; the TP-90-22 from Vertex is used where compact, stable support is required. Which fasteners fit the plate? Standard M12 bolts with a 1.75 mm pitch match the plate’s threaded interface, enabling use with common clamping hardware. Is the material suitable for heavy-duty clamping? The SS41C construction offers structural strength for routine workshop clamping; it is designed to resist deformation under typical clamping loads. Can several plates be combined for larger fixtures? Yes — the compact dimensions permit multiple plates to be arranged adjacently to build modular fixture supports. Does the plate include any surface treatment or coating? No specific coating information is provided for this item; the plate is supplied as SS41C structural steel. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
23.2mm Countersink DIN 6319G 120° Cone Angle for M20 Screws, Bore Ø23.2mm - AMF
The combination of DIN 6319G conformity, a precise Ø23.2 mm bore and a 120° cone angle ensures consistent, flush seating for M20 fastenings; benefit from reliable assembly performance and straightforward specification handling. Order the AMF conical washer directly via Metav Werkzeuge or consult our specialists if application advice is required. AMF Conical Washer DIN 6319G – for M20 Screws, Ø23.2 mm Bore, 120° Cone Angle AMF Conical Washer DIN 6319G provides a standardised seating solution for countersunk fasteners, designed for secure and repeatable mounting in industrial assemblies. DIN 6319G conformity Precision bore Ø23.2 mm 120° cone angle for flush seating For M20 screw assemblies Secure seating for flush countersunk connections A conical washer manufactured to DIN 6319G gives a defined bearing surface for countersunk screw heads. The standardised geometry reduces variability in joint behaviour and helps prevent eccentric loading of the fastener. Specifying a standardised seating element like this AMF component improves process reliability on assembly lines and in maintenance tasks, as the conical profile guides the screw head into a stable, repeatable position for predictable clamping results. Precision dimensions that reduce assembly variance The washer’s measured bore (Ø23.2 mm) and overall geometry, including an outer seating diameter of 50 mm and a height of 8 mm, ensure components align consistently during installation. These precise dimensions lower the need for post-assembly correction and cut down on rework time. When tolerance stacks are critical, using a standardised seating washer limits the number of variables affecting joint integrity and helps maintain torque and preload consistency across multiple fastenings. Integration into workshop and production workflows Designed for use with M20 fastenings and featuring a 120° cone angle, this seating washer fits seamlessly into common bolted-joint designs where flush appearance and load distribution are required. Its conformity to a recognised DIN standard simplifies parts lists and procurement, and it is suited to both one-off repairs and serial production. Specifiers and workshop planners benefit from predictable behaviour in load transfer and can include the component directly in assembly drawings and bills of materials. Contact Metav Werkzeuge for tailored advice and fast supply of the AMF conical washer — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss application requirements and place an order Technical data Article number: 4000833451NW Manufacturer: AMF Product type: Conical washer Standard: DIN 6319G Packaging unit: 1 Dimensions / Core data Bore diameter D2: 23.2 mm Outer diameter D4: 50 mm Height H3: 8 mm Cone angle: 120° Suitable for screw size: M20 Features / Applications Countersunk seating for flush installation Conforms to DIN 6319G For use with M20 screws Designed for consistent load distribution FAQ What screw size is this seating washer intended for? This AMF conical washer is specified for use with M20 screws and is listed under article number 4000833451NW. What are the key dimensions of the washer? The washer has a bore diameter of 23.2 mm (D2), an outer seating diameter of 50 mm (D4) and a height of 8 mm (H3). Which standard does the washer comply with? The component is manufactured to DIN 6319G, ensuring standardised geometry for countersunk seating. What is the cone angle and why does it matter? The 120° cone angle provides a reliable seating profile that promotes flush installation of countersunk heads and helps distribute load evenly across the bearing surface. Is this suitable for serial production use? Yes — the standardised geometry and precise dimensions of the AMF conical washer support repeatable assembly processes and are appropriate for both serial production and maintenance operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23.2mm Countersink Seat DIN 6319D 120° Cone Angle, For M20 Screws - AMF
Take advantage of the DIN 6319D conformity and the precise 23.2 mm bore to ensure a reliable seat for M20 countersunk screws, improving load distribution and alignment in assemblies; order via Metav Werkzeuge or consult their experts for supply and compatibility. AMF Countersunk Washer DIN 6319D (M20, 23.2 mm, 120°) The AMF Countersunk Washer DIN 6319D provides a defined countersink seat for fastening applications, designed to accommodate M20 countersunk screw heads and to ensure uniform contact in mechanical and structural assemblies. Designed to DIN 6319D standard Suitable for M20 countersunk screws Bore diameter 23.2 mm for accurate seating Countersink angle 120° for matching screw heads Precision seating reduces local stress and improves joint reliability Adherence to DIN 6319D guarantees a standardised geometry that helps distribute clamping forces evenly beneath countersunk screw heads. The defined 120° countersink angle and the 23.2 mm bore ensure that the screw head sits concentrically, which reduces localised material stress and the risk of deformation in thin plates or soft substrates. This measurable conformity simplifies quality checks and supports repeatable assembly processes in production environments. Consistent compatibility and easier assembly for faster production The washer is specified for M20 countersunk screws, enabling straightforward component matching and reducing assembly errors. By providing a precise bearing surface, the seat minimises the need for rework and improves torque transmission from the screw head to the joint. For procurement and inventory planning, the standardised geometry enables interchangeability between batches, supporting predictable lead times and smoother production scheduling. Robust sourcing and technical clarity for professional users Supplied under SKU 4000833471NW, the component is a pragmatic choice for engineers and buyers seeking standard-compliant parts that integrate into existing designs without modification. Clear technical dimensions such as D2 = 23.2 mm, D4 = 36 mm and H3 = 7.5 mm (see technical data) mean the seat can be verified quickly during incoming inspections. The documented specification supports traceability and simplifies supplier audits, reinforcing responsible procurement practices in workshops and industrial operations. For procurement advice, availability checks or compatibility queries regarding the AMF Countersunk Washer DIN 6319D, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to secure supply and technical guidance. Technical data Article number: 4000833471NW Standard: DIN 6319D Product type: Countersunk washer Brand: AMF Suitable for: M20 Facts Bore diameter (D2): 23.2 mm Outer diameter (D4): 36 mm Height (H3): 7.5 mm Countersink angle: 120° Special features Conforms to standardised geometry for repeatability Designed for countersunk screw heads to improve seating Packaged unit: 1 Label reference: Kegelpfanne DIN 6319D f. Schrauben M20 FAQ What screws is this seat designed for? The AMF Countersunk Washer DIN 6319D is designed for use with M20 countersunk screws, providing a matched bearing surface for proper head seating. Why is compliance with DIN 6319D important? Compliance with DIN 6319D ensures standardised dimensions and angles so assemblies behave predictably; this simplifies inspection, replacement and compatibility across suppliers. How does a 120° countersink improve joint performance? A 120° countersink matches the geometry of corresponding screw heads, increasing contact area and reducing point loads, which enhances joint longevity and reduces the risk of material damage. Can this washer be used in structural or mechanical assemblies? Yes, the defined seating and load distribution characteristics make the component suitable for both structural and mechanical fastening tasks where standardised countersunk connections are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
230mm Three-Point Vertical Clamp With Massive Holding Arm, 5,000 N Holding Force - Kukamet
Benefit from a compact, production-ready clamp offering a massive holding arm, a 230 mm reach and up to 5,000 N holding force for dependable workpiece retention; the horizontal foot provides secure fixture mounting. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 211 — Kukamet vertical clamp with 230 mm arm and 5,000 N holding force The Vertical clamp 211 is a heavy-duty vertical clamping device with a 230 mm arm and a horizontal foot, designed for secure fixture mounting in workshops and production lines. Vertical clamp »211« by Kukamet 230 mm heavy-duty holding arm Up to 5,000 N clamping force Horizontal foot for secure mounting Reliable clamping power for repetitive production The clamp delivers consistent holding through a clear specification of forces: 5,000 N holding force and 4,500 N pressing force, which translate into stable fixation during machining and assembly operations. This performance reduces rework and rejects by keeping components immobile under load. The combination of force ratings and a 230 mm arm makes the device suitable for medium‑duty jigs where repeatable results and cycle stability are required. Engineers benefit from predictable behaviour under load, enabling process planning with measurable parameters. Easy integration and compact fixture footprint Designed for simple installation, the clamp uses a horizontal foot that secures directly to fixture plates or machine tables, keeping the clamping axis vertical while saving horizontal space. With a mass of 1.567 kg, the component is light enough for modular fixtures yet sturdy in use. The mounting arrangement supports straightforward positioning in standard tooling setups and integration into automated sequences, so line planners can add secure vertical clamping without extensive redesign of existing fixtures. Robust materials and low-maintenance operation Finished in a blackened finish for surface protection, the clamp is built around a massive holding arm that minimises flex and wear in repetitive cycles. The surface treatment reduces corrosion risk in workshop environments and eases cleaning, supporting long-term dimensional stability. The mechanical design focuses on reliability and serviceability: expect minimal upkeep and sustained performance in continuous production runs. Sourcing through an experienced partner ensures steady supply and consistent quality control for workshop inventories. Contact Metav Werkzeuge for expert guidance on the Kukamet vertical clamp 211 — secure supply and precise advice direct from Emmerich, e‑mail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B211-5-D-C3 GTIN: 8680731507799 eClass: 21041717 ETIM: EC011973 Facts Arm length: 230 mm Holding force: 5,000 N Pressing force: 4,500 N Weight: 1.567 kg Special features Finish: blackened Mounting: horizontal foot Massive holding arm Category: Clamps Brand: Kukamet FAQ Is this clamp suitable for automated production jigs? The Vertical clamp 211 is designed for fixture integration and, with its horizontal foot and defined force ratings, is suitable for many automated production jigs where vertical clamping is required. What materials is the clamp intended to work with? The clamp provides secure mechanical holding for a wide range of workpieces; specific material suitability depends on the application, but the massive holding arm and force ratings make it appropriate for common workshop metals and assemblies. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot, which fastens to a fixture or machine table using standard fasteners; the arrangement gives a compact footprint and stable clamping axis. What surface protection does the clamp have? The unit is supplied with a blackened finish that offers basic corrosion resistance and reduces surface reflections, aiding longevity in a workshop environment. Can the clamp be used in manual fixtures as well as machine tables? Yes, the clamp’s weight and mounting style allow use in manual jigs and on machine tables; its 230 mm arm and force specification support versatile applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Three-Point Vertical Clamp, Massive Holding Arm, 5,000 N Hold Force, 4,500 N Clamp Force - Kukamet
Take advantage of the combination of robust clamping force, a long 230 mm reach arm and a compact, workshop-ready design for secure, repeatable fixture work; order the clamp directly via Metav Werkzeuge or consult our experts for application advice. Vertical clamp 212 by Kukamet — vertical lever clamp with 230 mm arm and 5,000 N holding force The Vertical clamp 212 is a vertical lever clamp designed for jigs, fixtures and assembly stations where dependable, repeatable holding is required Vertical mounting foot for upright installation Massive holding arm for long-term rigidity 230 mm reach arm for extended clamping range Up to 5,000 N holding force for secure retention Black blued finish for workshop resilience Consistent clamping performance that keeps production moving The clamp delivers a combination of measurable clamping and holding values that support stable processing: a 4,500 N clamping force and a 5,000 N holding force ensure workpieces remain fixed during machining, assembly or inspection. Specified reach of 230 mm gives access to components with deeper profiles while the compact overall mass (approx. 1.552 kg) reduces inertial load on fixtures. These quantifiable characteristics allow planners to predict behaviour in production cells and to size clamping systems against process forces, improving throughput and reducing rework. Built for workshop conditions and long service life Constructed with a massive holding arm and a black blued surface, the device resists wear in daily use and maintains alignment over many cycles. The vertical mounting foot enables direct attachment to plates or tooling blocks, simplifying integration into existing fixtures. Robust mechanical design minimises deformation under load, which in turn supports repeatable positioning and consistent quality over time. Material and finish were chosen to balance durability with cost-effective procurement, supporting a long service life in machine shops and assembly areas. Quick integration and reliable repeatability for fixture systems The vertical mounting concept and lever actuation permit fast mechanical installation and straightforward actuation within assembly sequences. Repeatable clamping is achieved by the rigid arm and defined closure geometry, reducing setup time and eliminating the need for frequent re-adjustment. As a standardised component, the clamp facilitates modular fixture design and predictable maintenance intervals; replacement and retrofitting are simplified by the clear technical data and SKU-based ordering. Contact Metav Werkzeuge today to discuss how the Kukamet Vertical clamp 212 fits into existing fixtures or to arrange supply from our Emmerich distribution centre Technical data SKU: B212-5-D-C3 GTIN: 8682843522387 Manufacturer: Kukamet Weight: 1.552 kg Facts Arm: 230 mm Max clamping force: 4,500 N Max holding force: 5,000 N ECLASS: 21041717 ETIM: EC011973 Special features Massive holding arm Vertical mounting foot Black blued finish Category: Clamps FAQ What is the maximum holding force of the Vertical clamp 212? The Vertical clamp 212 provides a maximum holding force of 5,000 N for secure retention during machining and assembly operations. Can the clamp be mounted upright on tooling plates? Yes, the Vertical clamp 212 is supplied with a vertical mounting foot suitable for attachment to fixture plates and tooling blocks. What are the key dimensions for planning fixture layout? Important planning data for the Vertical clamp 212: arm length 230 mm and overall weight approximately 1.552 kg. Is the surface finish suitable for workshop use? The black blued finish on the Vertical clamp 212 offers enhanced resistance to daily workshop wear and helps reduce visible corrosion in normal conditions. Which SKU should be ordered for this clamp? Order using SKU B212-5-D-C3 for the Kukamet Vertical clamp 212 to ensure the correct version and specification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp 4500N Thrust, 5000N Holding Force, Galvanised, Massive Arm & Safety Lock - Kukamet
Benefit from a robust clamping solution that combines a massive holding arm, a secure safety lock and a zinc‑plated finish for reliable, low‑maintenance operation; order the unit via Metav Werkzeuge or consult the advisers for application-specific guidance. Vertical clamp 212 by Kukamet — 230 mm reach, safety lock Vertical clamp 212 delivers secure vertical workholding for fixtures, jigs and assembly stations. Massive holding arm and safety lock 230 mm reach for deep fixtures Up to 5,000 N holding force Zinc-plated for corrosion resistance Secure clamping that reduces rework and downtime The vertical clamp features a massive holding arm together with a positive safety lock, providing consistent retention during machining and assembly cycles. The unit’s actuation delivers a maximum clamping force of 4,500 N, while the rated holding force of 5,000 N indicates the clamp’s capacity to resist unintended part movement once locked. These values translate into fewer re‑clamps, reduced scrap and improved cycle reliability—advantages that support higher first‑pass yield in production and repeatable results in jigs and fixtures. Compact integration into vertical fixtures and tooling With a 230 mm arm reach and a vertical foot mounting, the clamp integrates easily into space‑constrained setups where vertical securing is needed. The compact mass (approximately 1.32 kg) simplifies handling during assembly of fixture plates and reduces added inertia on moving sub‑assemblies. The lever‑actuated design originating from the lever clamp family ensures rapid engagement and release, supporting shorter takt times on repetitive operations while maintaining secure positioning during downstream processes. Corrosion resistance and straightforward maintenance The zinc‑plated finish offers basic corrosion protection suited to standard shop environments, lowering the frequency of surface care and preserving functional tolerances. The simple mechanical layout and robust construction mean the unit is easy to inspect and service; routine checks of the locking mechanism and pivot points keep the clamp performing to specification. The durable design supports long service intervals, making the component a pragmatic choice for workshops seeking dependable clamping without complex maintenance regimes. Contact Metav Werkzeuge for a technical consultation on the Kukamet 212 vertical clamp (SKU 212-5-D-L-C3) or request application advice via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 212-5-D-L-C3 GTIN: 8680731501827 Manufacturer: Kukamet Facts Arm length: 230 mm Weight: 1.32 kg Max. clamping force: 4,500 N Max. holding force: 5,000 N Material finish: zinc‑plated Mounting: vertical foot Special features Massive holding arm Safety locking mechanism Lever clamp design Suitable for fixtures and jigs FAQ What is the maximum holding force of this clamp? The Kukamet vertical clamp 212 provides a maximum holding force of 5,000 N, ensuring secure retention of workpieces once the safety lock is engaged. How long is the reach of the clamp arm? The clamp features a 230 mm arm, giving extended reach for deeper fixtures and allowing secure clamping in compact assemblies. Is the finish suitable for workshop environments? The unit is zinc‑plated, which offers corrosion resistance for standard workshop conditions and reduces routine surface maintenance. Can the clamp be mounted directly to fixture plates? Yes, the vertical foot mounting is intended for direct integration into fixture plates and jigs, facilitating stable vertical workholding. What distinguishes the safety lock feature? The safety lock prevents accidental release under load; combined with the massive holding arm, it maintains position during machining and handling operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp 4500N Thrust, Massive Arm With Safety Lock - Kukamet
Take advantage of the combination of robust construction, high holding performance and straightforward mounting for dependable clamping in fixtures and jigs; order the unit directly via Metav Werkzeuge or contact their consultants for application advice. Vertical clamp 211 by Kukamet — lever-operated vertical clamp with 230 mm arm and horizontal base The Vertical clamp 211 is a lever-operated vertical clamping device intended for secure holding in jigs, fixtures and assembly stations; it features a horizontal base for stable attachment and a solid holding arm with an integrated safety lock. 5,000 N maximum holding force 4,500 N clamping force 230 mm solid holding arm Horizontal base for stable mounting Reliable clamping performance for repeatable production The clamp achieves a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, providing a stable connection between workpiece and fixture. The distinction between holding and clamping force is important: clamping force refers to the applied pressure that secures a component, while holding force indicates the clamp’s resistance to external loads. This combination ensures consistent repeatability and reduces scrap rates in short-run and series production. Simple integration and compact reach reduce setup time A horizontal base simplifies mounting on plates and fixture beds, while the 230 mm arm extends reach into confined assemblies without adding bulk. The unit’s modest weight of 1.51 kg and compact footprint ease retrofitting into existing tooling. The blackened finish offers basic surface protection and an unobtrusive appearance for industrial environments, supporting fast integration and a tidy workstation layout. Built for safety and long service life The design combines a solid holding arm with a positive safety lock to prevent unintended release during machining or handling, which contributes to safer processes and lower downtime. The lever actuation offers a clear tactile position, making clamp status immediately recognisable; this reduces handling errors and helps maintain consistent cycle times over prolonged use. Versatile function for workshop and production fixtures As a lever-operated vertical clamp, the model suits manual assembly, welding and inspection jigs where a vertical clamping action is required. Its robust construction and compact reach make it appropriate for both repetitive production cells and bespoke workshop fixtures. The mechanical simplicity supports straightforward maintenance and predictable service intervals, helping to keep plant operations running smoothly. Contact Metav Werkzeuge for specialist advice or to secure the Kukamet Vertical clamp 211 for precise fixture applications; Metav Werkzeuge offers proximity from Emmerich and technical guidance for integration into production setups. Technical Data Article number: B211-5-D-L-C3 Manufacturer: Kukamet Data Arm length: 230 mm Maximum clamping force: 4,500 N Maximum holding force: 5,000 N Weight: 1.51 kg Mounting: horizontal base Material/finish: blackened finish eClass: 21041717 ETIM: EC011973 Special features Solid holding arm Safety locking device Lever-operated vertical clamp Massive holding arm and safety locking SKU: B211-5-D-L-C3 FAQ What mounting type is required for this clamp? The clamp is supplied with a horizontal base for stable attachment; the horizontal base is intended for bolting to plate or fixture beds. How much force does the clamp provide? The unit delivers a maximum clamping force of 4,500 N and a maximum holding force of 5,000 N, values specified for the Kukamet Vertical clamp 211 (SKU B211-5-D-L-C3). Does the clamp include a safety feature to prevent accidental release? Yes. The device incorporates a safety locking mechanism combined with a massive holding arm to reduce the risk of unintended opening during processes. Is the finish corrosion-resistant? The product has a blackened finish that offers basic surface protection suitable for typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp 5,000N Holding Force, 4,500N Closing Force, Galvanised, Horizontal Base, Massive Arm & Safety Lock - Kukamet
Take advantage of the combination of a heavy-duty holding arm, galvanised construction and up to 5,000 N holding force for secure, repeatable clamping in production and fixtures. Order the clamp directly via Metav Werkzeuge or consult the technical team for application advice. Vertical clamp 211» – Kukamet» — heavy-duty arm, 5,000 N holding force The Vertical clamp 211 is a compact vertical clamping device for jigs and fixtures, designed for secure bench or fixture mounting with a horizontal base. Heavy-duty holding arm with safety lock Horizontal base for secure fixture mounting Galvanised construction for corrosion resistance 5,000 N maximum holding force Secure, repeatable clamping for production use The robust construction combines a heavy-duty arm with an integrated safety lock, ensuring a positive mechanical hold under repeated cycles. Rated with a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N, the device delivers the force levels required for demanding workshop and light industrial applications. The mechanical design reduces the need for frequent re-adjustment, contributing to a smoother production flow and fewer stoppages during setup. Durable mounting and compact installation benefits With a horizontal base for straightforward attachment to fixtures and benches, the clamp provides a compact footprint while retaining stability. The galvanised finish protects the mechanism from corrosion in workshop environments, extending service life and reducing maintenance intervals. Weighing 1.51 kg, the unit is easy to position within fixtures and jigs yet heavy enough to remain stable when in use. The combination of small size and robust materials supports a wide range of fixture designs without costly adaptations. Flexible application across jigs and fixtures Engineered as a lever-style clamping component, the model is suitable for fixturing tasks in assembly, welding, and machining jigs where vertical action and positive locking are required. The clamp’s design supports precise repeatability in fixture cycles, making it a practical choice for production tooling and repair benches alike. For complex integrations or bespoke fixture layouts, technical documentation and mounting recommendations are available to support specification and installation. The Vertical clamp 211 performs reliably as part of modular clamping systems and bench-mounted assemblies. Choose the Kukamet Vertical clamp 211 for dependable, repeatable clamping — contact Metav Werkzeuge in Emmerich for specification support and order coordination: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 211-5-D-L-C3 GTIN: 8680731501452 Manufacturer: Kukamet Facts Arm length: 230 mm Weight: 1.51 kg Max clamping force: 4,500 N Max holding force: 5,000 N eClass: 21041717 ETIM: EC011973 Special features Galvanised material Horizontal foot for mounting Massive holding arm and safety lock Lever clamp design Category: Spanner FAQ What is the maximum holding force of this clamp? The Vertical clamp 211 from Kukamet has a maximum holding force of 5,000 N and a maximum clamping force of 4,500 N. Is the clamp suitable for bench mounting? Yes, the design includes a horizontal foot for secure bench or fixture mounting in jigs and assemblies. What material protects the clamp against corrosion? The clamp is manufactured in a galvanised finish to provide corrosion resistance in workshop environments. Which applications is this lever clamp intended for? The lever-style Vertical clamp 211 is intended for jigs, fixtures and bench-mounted assemblies in light industrial and workshop settings. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp Three-Point Heavy-Duty Arm Safety Lock, 4.5kN Press Force - Kukamet
Take advantage of a robust 230 mm holding arm, a 5,000 N maximum hold force and an integrated safety lock to keep fixtures secure and repeatability high; order the clamp through Metav Werkzeuge or consult the technical advisors for application guidance. Vertikalspanner 212 – Vertical toggle clamp with 230 mm arm and 5,000 N holding force (Kukamet) The Vertikalspanner 212 is a vertical toggle clamp designed for secure workholding in welding, assembly and jig fixtures where consistent clamping and fast cycle times are required Robust 230 mm holding arm Up to 5,000 N holding force Integrated safety lock for secure workholding Blackened finish for industrial environments Secure, repeatable clamping that protects tolerances The clamp delivers a clear performance advantage through its 5,000 N holding force and a 4,500 N clamping force, which translate into reliable fixation of components during machining or assembly. These figures describe different functions: the clamping force is the downward force applied by the mechanism, while the holding force is the ultimate resistance to release under load. The result is fewer rejects and shorter set-up times, because workpieces remain stable within jigs and fixtures. For production environments that need consistent part positioning, the vertical toggle design ensures the clamping stroke is compact and repeatable. Robust construction that reduces maintenance and downtime A massive holding arm and a dedicated safety lock make the device suitable for repeated cycles in demanding applications. The solid construction, combined with a modest weight of 1.32 kg, balances durability with ease of handling during fixture assembly. The blackened surface treatment provides a hard-wearing exterior suited to industrial use. Together, these aspects reduce the likelihood of unexpected maintenance and extend service intervals, supporting continuous operation on the shop floor. Easy integration via vertical foot mounting The clamp is supplied with a vertical foot for straightforward mounting in fixtures, enabling simple alignment in vertical planes without complex adapters. The 230 mm arm length gives additional reach for larger assemblies while keeping the clamping action close to the workpiece, which is advantageous in tight jigs. The lever-style actuation allows quick manual engagement and release, making the unit a practical choice for repetitive process steps where speed and accessibility matter. Designed for fixtures, jigs and repetitive production tasks This lever clamp is especially useful in welding jigs, assembly benches and test fixtures where secure, repeatable holding is essential. Supplied under the Kukamet range and available via Metav Werkzeuge, the component is intended for industrial users who prioritise dependable mechanics over temporary solutions. The combination of measurable holding capacity, durable finish and a positive locking system supports safer, more predictable production workflows while aligning with quality-focused procurement strategies. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet Vertikalspanner 212 into fixtures or request a technical datasheet from Metav Werkzeuge in Emmerich by email or phone Technical Data Article number: B212-5-D-L-C3 Designation: Vertikalspanner 212 Manufacturer: Kukamet Facts Arm length: 230 mm Clamping force (max): 4,500 N Holding force (max): 5,000 N Weight: 1.32 kg eClass: 21041717 ETIM: EC011973 Special features Material / surface: blackened finish Mounting: vertical foot Massive holding arm Safety lock Category: Spanner FAQ What maximum holding capacity does this clamp provide? The clamp provides a maximum 5,000 N holding force; the specification for the Vertikalspanner 212 indicates reliable resistance to load once engaged. Can the clamp be mounted directly in welded fixtures? Yes, the vertical foot mounting allows the Vertikalspanner 212 to be fastened directly to welded fixtures and jig plates for fixed production setups. Is the safety lock suitable for repetitive automated processes? The integrated safety lock on the Kukamet vertical toggle clamp secures the lever in position, reducing unintended release during repeated manual or semi-automated cycles. What benefits does the 230 mm arm length bring? The 230 mm arm offers extended reach for larger assemblies while keeping the clamp stroke compact, improving accessibility in complex jigs and reducing set-up time. Which environments is the clamp intended for? The device is aimed at industrial and workshop use where robust, repeatable clamping is required; the blackened finish supports durability under regular operational conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp Three-Point Massive Holding Arm, 4 500 N Thrust / 5 000 N Holding Force, Zinc Plated - Kukamet
Take advantage of the combination of a galvanised finish, a massive 230 mm holding arm and reliable clamping forces up to 4,500 N to keep fixtures steady during machining and assembly operations; order the 211 vertical clamp directly via Metav Werkzeuge or consult our advisors for application support. 211 vertical clamp — Kukamet vertical clamp with 230 mm arm and galvanised finish 211 vertical clamp is a heavy-duty vertical clamping device for secure workholding in workshop and production environments, suited to bench or fixture mounting with a horizontal foot. Galvanised finish for corrosion resistance Massive 230 mm holding arm for extended reach Horizontal foot for stable mounting Clamping force up to 4,500 N Robust construction for dependable fixturing The unit combines a galvanised finish with a massive holding arm to deliver long-term resistance to wear and corrosion while maintaining structural integrity. The robust arm extends 230 mm, enabling secure engagement of larger or awkwardly positioned workpieces without sacrificing stability. With a compact overall mass of 1.567 kg, the clamp balances solidity and ease of handling, allowing fast repositioning on assembly jigs while preserving a low footprint on the bench. This design reduces fixture adjustments and supports consistent results across repetitive operations. Measurable performance that supports process reliability Designed for repeatable clamping, the device provides a maximum clamping force of 4,500 N and a holding capability up to 5,000 N, metrics that translate into secure workholding under moderate to high load conditions. The horizontal foot simplifies installation on plate or fixture bases and helps maintain parallel alignment during actuation. These quantifiable figures enable engineering teams to plan fixture capacities and safety margins with confidence, improving cycle reliability and reducing scrap caused by shifting parts. Practical integration into workshop workflows The straightforward mechanical concept and standard mounting footprint make integration into existing setups fast and predictable. The 230 mm arm increases reach without complex subassemblies, while the horizontal foot supports rigid anchoring to tables, plates or custom fixtures. For production environments requiring dependable manual or automated clamping, this solution minimises downtime for setup and maintenance. Where technical advice is required for bespoke fixtures or batch applications, Metav Werkzeuge provides guidance and a wide product range to centralise procurement and streamline supply. Contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss the 211 vertical clamp’s suitability for specific fixturing tasks or to request tailored mounting advice. Technical data SKU: 211-5-D-C3 GTIN: 8680731501421 Weight: 1.567 kg Material: galvanised Core specifications Arm length: 230 mm Mounting: horizontal foot Maximum clamping force: 4,500 N Maximum holding force: 5,000 N eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Category: Spanner Manufacturer: Kukamet FAQ What is the reach of the clamp arm? The clamp features a 230 mm arm, providing extended reach for larger fixtures and off-centre workpieces. What clamping and holding forces are specified? The 211 vertical clamp specifies a maximum clamping force of 4,500 N and a holding capability up to 5,000 N for reliable fixturing. How is the clamp mounted? Mounting is via a horizontal foot, allowing rigid attachment to tables, plates or custom fixture bases. What material and surface treatment does the clamp have? The component is galvanised for enhanced corrosion resistance and durable workshop use. What is the product SKU for ordering or reference? The product is listed under SKU 211-5-D-C3 and is supplied by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust, Zinc Plated - Kukamet
Take advantage of the 5,000 N holding force and 4,500 N pressing capability combined with a galvanised, heavy‑duty arm to secure components reliably during assembly and light machining; the compact 230 mm reach keeps the clamping solution space‑efficient. Order the clamp directly via Metav Werkzeuge or consult our specialists for tailored application advice. Kukamet 212 Vertical Clamp — Galvanised, 230 mm Arm The 212 vertical clamp offers a robust lever clamping solution for fixture plates, jigs and workshop benches where secure, repeatable retention is required Massive holding arm for stable clamping 230 mm arm length for extended reach 5,000 N maximum holding force Galvanised steel body resists corrosion Consistent clamping power for precision work The clamp delivers a maximum holding force of 5,000 N with a pressing capability up to 4,500 N, providing the secure contact pressure necessary for repeatable operations. High, well‑defined forces reduce part movement during finishing or assembly and therefore lower reject rates and rework. Engineers benefit from the straightforward conversion of force figures into setup parameters, enabling reliable process control when reproducing clamping settings across fixtures. The clear performance values support objective planning for cycle times and quality assurance. Compact mounting and rapid fixture integration A 230 mm arm and vertical foot mounting enable installation on upright fixture plates or bench uprights without excessive spatial demands. The design’s massive arm gives a positive mechanical advantage, so clamping is achieved with a simple lever action but substantial retention result. The unit’s moderate mass contributes to stable anchoring while keeping the overall fixture weight low. Integration into modular clamping systems or bespoke jigs is straightforward, making the clamp suitable for both small runs and repetitive assembly tasks. Built for workshop environments and low maintenance Constructed from galvanised steel, the clamp resists workshop humidity and incidental coolant exposure, increasing service life and reducing maintenance intervals. Surfaces treated against corrosion preserve contact geometry and reduce the need for frequent adjustment, which supports uptime in busy production areas. The robust mechanical construction and obvious service points simplify inspection routines and make the device a dependable component in a long‑term tooling strategy, helping maintain process stability over time. Typical applications and practical benefits The lever clamp is designed for tasks such as assembly, bench work, light machining and welding fixtures where a durable, repeatable hold is required. Its performance figures and compact footprint suit production benches, small machining centres and manual workstations. The combination of high retention and simple actuation speeds up setup and part changeover, delivering a measurable improvement in throughput and operator ergonomics without complex handling aids. For procurement or technical clarification regarding the Kukamet 212 vertical clamp, contact Metav Werkzeuge for application guidance and secure supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 212-5-D-C3 SKU: 212-5-D-C3 GTIN: 8680731501797 Material: Galvanised Weight: 1.552 kg Facts Arm length: 230 mm Maximum holding force: 5,000 N Maximum pressing force: 4,500 N Category: Clamps Special features Massive holding arm Vertical foot mounting Galvanised finish Category path: Spanner FAQ What is the maximum holding force of this clamp? The Kukamet 212 vertical clamp provides a maximum holding force of 5,000 N suitable for reliable retention in assembly and light machining tasks. Can the clamp be mounted on upright fixture plates? Yes, the vertical foot mounting of the 212 clamp is designed for installation on upright plates and bench uprights for space‑efficient integration. Is the clamp suitable for use in humid workshop environments? The galvanised steel construction protects the clamp against corrosion, making the 212 suitable for workshop use with reduced maintenance needs. How long is the clamping arm and what does that mean for reach? The arm measures 230 mm, offering extended reach while maintaining a compact overall footprint for fixture layouts. Which applications benefit most from this lever clamp? Typical uses include jigs, assembly benches, welding fixtures and light machining where repeatable, high‑force retention is required; the 212 clamp is optimised for these scenarios. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230N Push Rod Clamp With Spring, Horizontal Foot, Zinc-Plated - Kukamet
Take advantage of a spring-assisted, zinc-plated clamp that combines reliable clamping force and compact design to keep fixtures stable during repetitive tasks; order the part directly via Metav Werkzeuge or consult our specialists for integration advice. 511 Push-rod Clamp by Kukamet — spring-loaded, zinc-plated, horizontal foot The 511 push-rod clamp is a spring-supported clamping device intended for fixture and jig applications, providing consistent workpiece retention when mounted via a horizontal foot. Spring-assisted actuation for reliable clamping Horizontal mounting foot for flush installation Zinc-plated for corrosion resistance Compact design, weight 0.142 kg Consistent clamping performance for repetitive tasks The spring-supported push-rod design delivers a controlled clamping action that is well suited to serial production and repetitive assembly. A maximum clamping force of 230 N and a maximum holding force of 280 N are specified, which ensures that the clamp maintains workpiece position under moderate loads. The difference between clamping and holding force is intentional: the actuation mechanism is spring-biased for repeatable engagement, while the higher holding figure indicates the device’s ability to resist displacement once engaged. This combination reduces the need for constant re-adjustment and supports stable cycle times in jigs and fixtures. Built for durable workshops and simple mounting Constructed with a zinc-plated finish, the unit provides basic corrosion protection for workshop environments where humidity or coolant splash is present. The horizontal foot allows for low-profile installation on plates or fixture bases, enabling clamps to be fitted flush with minimal protrusion. At 0.142 kg, the component is compact and lightweight, easing handling during assembly and reducing additional load on fixture plates. These attributes translate into straightforward integration into existing tooling layouts and predictable service life under normal workshop conditions. Practical value across inspection, assembly and machining jigs This push-rod clamp is suited to applications that demand dependable, repeatable retention without complex actuation systems. Typical uses include manual assembly stations, inspection fixtures and light machining jigs where quick engagement and automatic return are advantageous. The spring-assisted mechanism minimises operator effort during frequent clamping cycles, contributing to improved ergonomics and reduced cycle times. Specifying this clamp in dedicated fixtures supports operational reliability and helps standardise tooling across production cells, creating measurable gains in process consistency. For procurement or application guidance on the Kukamet 511 push-rod clamp, contact Metav Werkzeuge to arrange supply from our Emmerich warehouse and discuss suitability for specific fixtures and processes Technical Data Article number: 511-1-Y GTIN: 8680731506075 Brand: Kukamet Material: Zinc-plated Mounting: Horizontal foot Facts Clamping force max: 230 N Holding force max: 280 N Weight: 0.142 kg SKU: 511-1-Y Special features Spring-supported actuation Compact push-rod design Category: Clamps / Spanners Catalogue: 511-Y-katalogseite.pdf FAQ What is the maximum clamping force of this clamp? The maximum clamping force is 230 N for the 511 push-rod clamp (Kukamet, SKU 511-1-Y), with a holding force specified at 280 N. How is the clamp mounted to a fixture? Mounting is achieved via a horizontal foot; the horizontal foot allows flush attachment to plates and fixture bases for low-profile installation. What corrosion protection does the device offer? The component is zinc-plated, providing basic corrosion resistance suitable for workshop environments. Is the clamp suitable for high-load machining operations? The 511 is intended for light to moderate clamping tasks in fixtures and jigs; its specified forces (230 N clamping, 280 N holding) reflect suitability for assembly and inspection applications rather than heavy-duty machining. Where can the product documentation be found? A catalogue page (511-Y-katalogseite.pdf) is available alongside product images and technical specifications for the 511 clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
230V-12/24 Transformer and Bulb for VHL Halogen Lamp - Vertex
Take advantage of multi‑voltage compatibility and a compact, all‑in‑one lighting solution to simplify installation and maintenance in industrial lighting setups; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. V-T18 transformer and halogen bulb — multi‑voltage supply, compact 1.4 kg unit V-T18 is a combined transformer and halogen bulb assembly designed to supply the VHL halogen lamp series with selectable low‑voltage outputs for industrial lighting applications. Multi‑voltage input: 415/380/230V to 12/24V Integrated transformer and halogen bulb unit Compact design, weight 1.4 kg SKU V-T18 with GTIN 4061905093012 Robust, multi‑voltage power supply for reliable lighting The combined transformer and lamp assembly provides a straightforward electrical solution for halogen lighting requiring 12 V or 24 V outputs. With three input voltage options (415 V, 380 V or 230 V), the unit adapts to diverse plant mains supplies, reducing the need for additional step‑down equipment. The compact format and modest weight (1.4 kg) support easy handling and mounting in confined spaces. The electrical configuration is presented in clear technical terms to assist planning and to support compatibility checks with existing control gear. Simplified installation and predictable performance Integrating transformer and bulb in one module minimises wiring complexity and shortens commissioning time. The assembly is engineered for consistent light output and stable voltage conversion, which contributes to longer service intervals and predictable maintenance cycles. Where a halogen lamp requires replacement, the combined unit design streamlines the spare‑part workflow and reduces downtime. Technical clarity on input/output relationships and connector arrangement assists electricians and maintenance planners when specifying the component for retrofit or new installations. Practical advantages for workshop and production environments The unit’s design supports a pragmatic approach to workshop lighting: compact footprint, clear voltage selection and a single SKU simplify inventory management. The product is suitable for applications where robust, controllable halogen illumination remains the preferred choice, such as inspection benches, machine tool workstations and specialised task lighting. Clear labelling and standard electrical ratings help integrate the assembly into formal maintenance schedules and safety documentation. Contact Metav Werkzeuge today to discuss how the Vertex V-T18 multi‑voltage transformer and halogen bulb assembly fits into current installations or to request specification support from our technical consultants Technical data SKU: V-T18 GTIN: 4061905093012 Manufacturer: Vertex Core specifications Weight: 1.4 kg Input → Output: 415V → 12/24V Input → Output: 380V → 12/24V Input → Output: 230V → 12/24V Features Combined transformer and halogen bulb Compatible with halogen lamp VHL Compact, integrated assembly Industrial lighting application FAQ What input voltages does the unit accept? The V-T18 accepts three mains inputs: 415 V, 380 V or 230 V, each delivering a selectable 12 V or 24 V output for the connected halogen lamp. Is the transformer and bulb supplied as a single replaceable unit? Yes, the vertex V-T18 is supplied as an integrated transformer and halogen bulb assembly to simplify replacement and reduce installation complexity. Can the V-T18 be used in machine tool lighting or inspection benches? The assembly is suitable for industrial task lighting such as machine tool workstations and inspection benches where halogen illumination is specified. What is the weight and handling consideration for installation? The unit weighs 1.4 kg, offering a compact and manageable form factor for mounting in confined or elevated positions. Does the product include a manufacturer identifier or SKU for ordering? Ordering and inventory reference is by SKU V-T18 and GTIN 4061905093012; the item is manufactured by Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
232mm Hydraulic Three-Point Chuck 3,900 kgf Clamping Force, 2,000 rpm, 0.03mm Accuracy - Vertex
Robust 3,900 kgf clamping force, 232 mm diameter and 0.03 mm accuracy combine to deliver reliable, vibration-resistant workholding for medium-duty turning and milling. Order the VSK-9 chuck via Metav Werkzeuge or contact the consultants for tailored application advice. VSK-9 workholding chuck — 232 mm diameter, 3,900 kgf clamping force (Vertex) The VSK-9 is a heavy-duty workholding chuck engineered to secure large rotating workpieces for CNC turning and related machining tasks, prioritising repeatability and machining stability. 232 mm nominal diameter 3,900 kgf clamping force 0.03 mm repeatability accuracy Up to 2000 r.p.m. operational speed Robust 20.4 kg construction Precision clamping for consistent machining results The chuck delivers repeatable accuracy of 0.03 mm, a level that reduces concentricity errors and minimises rework on turned components. Such precision is beneficial when maintaining tight tolerances across production batches, because the stable clamping reduces runout and helps preserve tool geometry. In practical terms, the combination of high clamping force and measured repeatability supports finer surface finishes and predictable dimensional results, making the device suitable where consistent quality is essential. Designed to enhance productivity and reduce downtime With a 232 mm nominal diameter and an operational limit of 2000 r.p.m., the unit accommodates larger workpieces while balancing rotational speed and holding stability. The substantial mass of 20.4 kg contributes to damping of spindle vibrations, which in turn can extend cutting tool life and lower scrap rates. These factors create a tangible efficiency gain on the shop floor: fewer interruptions for rework, steadier cycle times and a smoother production flow when used in repetitive turning operations. Practical integration and routine care for long service life The chuck is intended for straightforward integration into standard workshop workholding setups and benefits from routine checks of clamping force and runout. Periodic inspection ensures the 3,900 kgf clamping capability remains within specification and that the 0.03 mm accuracy is retained under operational conditions. Simple maintenance—cleaning contact surfaces, verifying torque settings and replacing wear parts as needed—keeps the unit performing reliably, which supports continuous production without unexpected stoppages. Applications that profit from secure, high-force clamping This workholding solution is especially suitable for machining large-diameter components where secure grip and concentricity are priorities. The robust clamping capacity supports operations that require higher cutting forces or interrupted cuts, improving process stability and operator confidence. Backed by Vertex engineering and supplied through Metav Werkzeuge, the chuck aligns with workshop needs for durable, dependable workholding that scales to industrial demands. For precise, high-force workholding from a trusted brand, contact Metav Werkzeuge to discuss the VSK-9 chuck and how it fits specific machining requirements Technical data SKU: VSK-9 GTIN: 4061905095078 Manufacturer: Vertex Core specifications Diameter: 232 mm Accuracy: 0.03 mm Clamping force: 3,900 kgf Maximum speed: 2000 r.p.m. Weight: 20.4 kg Special features Nominal 232 mm diameter for larger workpieces High clamping force for secure holding Robust construction aiding vibration damping FAQ What level of accuracy can be expected from this chuck? The VSK-9 chuck offers a repeatability of 0.03 mm, providing consistent concentricity for batch machining and reduced need for rework. Is the chuck suitable for high-speed turning? The chuck is rated up to 2000 r.p.m., appropriate for medium-speed turning where secure clamping and stability are required. How does the clamping force influence machining performance? A clamping force of 3,900 kgf ensures reliable grip under higher cutting loads, improving process stability and reducing the risk of workpiece slippage. What maintenance is recommended to retain accuracy? Regular cleaning of contact surfaces, inspection of runout and verification of clamping force preserve the 0.03 mm accuracy and operational reliability of the chuck. Can this chuck handle large, heavy components? The nominal 232 mm diameter and robust 20.4 kg construction are designed to support larger rotating workpieces and improve vibration damping during machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
232mm Three-Jaw Chuck Three-Point Clamping, 3,900 kgf, 2,000 rpm - Vertex
The combination of secure clamping with a 3,900 kgf holding force and precision to 0.03 mm ensures consistent concentricity and reduced rework; the 232 mm diameter and 2,000 rpm rating support efficient turning of medium-sized workpieces. Order the VSC-9 directly via Metav Werkzeuge or consult the Metav team for integration advice. Vertex VSC-9 three-jaw chuck — 232 mm, 3,900 kgf The Vertex VSC-9 three-jaw chuck is a self‑centering clamping solution for lathe turning operations, designed to hold medium-sized workpieces securely while maintaining high concentric accuracy. Three-jaw chuck, self-centering design 232 mm diameter for medium-sized workpieces 3,900 kgf clamping force for secure holding Max. 2,000 rpm for stable high-speed turning Secure holding that reduces scrap and setup time A high clamping force capacity of 3,900 kgf delivers reliable workpiece retention during machining, reducing the risk of slippage under load and lowering scrap rates. The chuck’s configuration provides repeatable seating and stable torque transmission, which shortens set‑up intervals and stabilises cycle times on production lathes. The combination of firm mechanical grip and consistent positioning supports uninterrupted runs and contributes directly to productive throughput. Precision concentricity for tighter tolerances Achieving an accuracy of 0.03 mm limits radial runout and helps meet tighter tolerance bands without excessive finishing passes. In practice, this level of precision improves part interchangeability and reduces inspection failures. For workshops aiming to control dimensional variation, the chuck’s concentric performance translates into fewer corrective operations and a smoother quality workflow, especially when machining external diameters where true running is essential. Designed for efficient turning of medium parts With a nominal diameter of 232 mm and a maximum rotational speed of 2,000 rpm, the chuck balances contact area and rotational stability for a wide range of medium workpieces. Its three-jaw arrangement offers quick clamping of round or hexagonal stock and simplifies centring tasks compared with multi‑jaw alternatives. Built to integrate with standard lathe spindles, the unit supports consistent cycle speeds and contributes to predictable machining results when combined with appropriate tooling and feeds. Discuss integration and technical fit with Metav Werkzeuge — request a specification check or place an order for the Vertex VSC-9 three-jaw chuck directly from our Emmerich warehouse Technical Data SKU: VSC-9 GTIN: 4061905096075 Brand: Vertex ECLASS: 21020590 Facts Diameter: 232 mm Accuracy: 0.03 mm Max. speed: 2,000 rpm Clamping force: 3,900 kgf Special features Three jaws Self‑centering design Medium workpiece capacity FAQ What maximum rotational speed does the chuck support? The VSC-9 three‑jaw chuck supports a maximum speed of 2,000 rpm for stable turning operations. How much clamping force does the chuck provide? The chuck offers a clamping force of 3,900 kgf, enabling secure holding of parts under machining loads. What does the stated accuracy of 0.03 mm refer to? The 0.03 mm value denotes the permissible radial runout or concentricity deviation, indicating close tolerances for turned parts. What size of workpiece is the chuck suitable for? With a diameter of 232 mm, the chuck is optimised for medium-sized workpieces compatible with that chuck diameter. Who manufactures this chuck and what is the SKU? This unit is manufactured by Vertex and sold as the VSC-9 three‑jaw chuck (SKU: VSC-9). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
233mm Push Rod Clamp Automatic Jaw Adjustment 2,500N - BESSEY
Take advantage of a compact, workshop-ready clamp that combines automatic span adjustment with a reliable 2,500 N maximum clamping force to speed up assembly and secure workpieces consistently; order the BESSEY solution directly via Metav Werkzeuge or ask the consultants for advice. BESSEY bar clamp, size 25 — automatic span adjustment, 2,500 N clamping force BESSEY bar clamp, size 25 for quick-span adjustments in workshop and assembly environments, designed for medium-duty holding tasks Automatic span adjustment 2,500 N maximum clamping force Overall length 233 mm Size 25 for medium-duty tasks Consistent clamping performance for assembly and repair The automatic span adjustment reduces set-up cycles by aligning the jaws to the workpiece instantly, while the specified 2,500 N rating denotes the maximum axial holding capacity under normal working conditions. For practical purposes, 2,500 N corresponds to a firm hold on glued joints, light fabrication and many repair tasks where stable pressure is required. This combination of fast adjustment and defined clamping force supports repeatable results and helps maintain production throughput in small workshops and repair bays. Compact footprint for tight working conditions Designed with an overall length of 233 mm, a width of 60 mm and a height of 46 mm, the clamp is intended for situations where accessibility is limited. The modest dimensions enable secure clamping in confined fixtures and on narrow workpieces without obstructing surrounding tooling. The compact format also simplifies storage and handling in crowded toolkits while retaining sufficient reach for standard medium-duty operations. Faster setup and dependable handling The automatic adjustment mechanism shortens setup time and reduces the number of manual operations needed during repetitive tasks, making the clamp a practical choice for batch work and frequent repositioning. Marked as Size 25, the tool targets medium-duty applications where rapid, reliable holding is more important than very large span capacity. Supplied as a single unit, the clamp integrates smoothly into routine workflows and is suitable for use at workbenches, in maintenance shops and on-site assemblies. Contact Metav Werkzeuge to discuss availability or to request tailored technical advice for integrating the BESSEY bar clamp, size 25, into current workflows. Technical data Article number: 4123716102NW Label: Schubstangenspanner Gr.25 BESSEY Manufacturer: BESSEY Product type: Bar clamp (Schubstangenspanner) Packaging unit: 1 Facts Overall length: 233 mm Width: 60 mm Height: 46 mm Maximum clamping force: 2,500 N Size designation: 25 Special features Automatic span adjustment Medium-duty application SKU / UID: 4123716102NW FAQ What does the automatic span adjustment do? The automatic span adjustment ensures the jaws align with the workpiece quickly, reducing set-up time and enabling consistent clamping pressure with the BESSEY bar clamp, size 25 (SKU 4123716102NW). What level of work is suitable for a 2,500 N clamping force? A maximum clamping force of 2,500 N is suitable for medium-duty workshop tasks such as assembly, gluing and light fabrication where a firm, repeatable hold is required. Can the clamp reach into narrow fixtures? Yes; with an overall length of 233 mm and a compact profile, the clamp is designed to access confined spaces and narrow workpieces typical in repair and maintenance settings. Is the clamp supplied ready for immediate use? The tool is supplied as a single unit (packaging unit 1) and is ready for installation into standard workshop routines for medium-duty clamping tasks. How is the size designation relevant to selection? The Size 25 marking indicates the clamp’s intended application class—appropriate for medium-duty operations where quick adjustment and reliable holding are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23mm 5C Collet, Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of a compact toolholding solution that combines precise concentricity, reliable repeatability and straightforward compatibility with standard 5C toolholding systems. Order the collet directly via Metav Werkzeuge or ask the consultants for application advice. 5C-23 Collet — 23 mm precision collet, 87 mm length (Vertex) A 5C-23 collet for secure clamping of round shanks and small workpieces in general machining applications, designed for consistent concentricity and repeatable toolholding. 23 mm nominal diameter for standard shanks High repeatability with ±0.02 mm accuracy Compact 87 mm overall length for tight setups Lightweight construction at 0.21 kg for easy handling Consistent precision for repeatable machining The collet delivers a high level of precision that supports consistent cycle times and reduces scrap. With a nominal diameter of 23 mm and an indicated accuracy of ±0.02 mm, concentricity is improved when compared with loose or improvised clamping methods. This reliability translates into fewer reworks and a steadier production flow, particularly in batch operations where repeatability matters. The design follows established 5C system standards, ensuring predictable behaviour in the toolholding chain and easier process validation. Compact form that frees up machine space An overall length of 87 mm and a weight of 0.21 kg make the component suitable for setups where space and balance are considerations. The relatively short profile helps maintain clearance in compact spindles and reduces the risk of collisions in multi-axis operations. Being part of the standard 5C family, the component integrates with common collet chucks and arbor arrangements, offering practical compatibility without complex adaptors. The compact design therefore supports both efficient fixturing and safe operation. Simple selection, clear technical reference Specification-focused documentation eases selection and reduces procurement uncertainty. The basic numeric values — 23 mm diameter, ±0.02 mm accuracy, 87 mm length and 0.21 kg weight — provide a concise basis for comparing alternatives and checking machine compatibility. As a Vertex-manufactured tool, the collet aligns with widely used workshop routines for inspection and maintenance; routine checks on runout and clamp condition are sufficient to maintain performance. This makes the product a pragmatic choice for maintenance cycles and shop-floor quality regimes. Contact Metav Werkzeuge in Emmerich for precise specification and availability of Vertex 5C collets, and let the Metav consultants advise on the best toolholding setup for the application Technical Data SKU: 5C-23 GTIN: 4061905090134 Manufacturer: Vertex Core specifications Diameter: 23 mm Length: 87 mm Accuracy: 0.02 mm Weight: 0.21 kg eClass: 21041712 Design & special features 5C collet system Compact overall length for tight setups Standardised toolholding compatibility FAQ What nominal diameter does the collet accept? The collet is specified for a nominal diameter of 23 mm and is identified as the 5C-23 collet from Vertex. How accurate is the clamping concentricity? The Vertex 5C-23 collet is indicated with an accuracy of ±0.02 mm, providing repeatable concentricity for typical workshop applications. Is this collet compatible with standard 5C chucks and arbors? Yes, the component follows the 5C system standard and is intended for use with conventional 5C chucks and arbors. What length should be allowed for the collet in a compact setup? Allow for an overall length of 87 mm when determining clearance and collision envelopes in the machine setup. How heavy is the collet for handling and balancing considerations? The collet weighs 0.21 kg, which assists manual handling and has minimal impact on balance in typical toolholding configurations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
23–51mm Clamping Support Pad Set Universal, Size 1 - AMF
Take advantage of the combination of adjustable height range (23–51 mm) and compact Gr.1 sizing to achieve consistent, repeatable clamping without lengthy setup. Order the set directly via Metav Werkzeuge or request technical guidance for integration into existing clamping systems. Clamping shim set No. 6500E – Gr.1, adjustable 23–51 mm (AMF) The Clamping shim set No. 6500E Gr.1 from AMF provides a compact, universally applicable solution for fine height adjustment in clamping setups. Variable height range 23–51 mm Universal application for clamping tasks Compact Gr.1 for confined workspaces Repeatable positioning and quick stacking Reliable height compensation that reduces setup time A clamping shim set such as the No. 6500E Gr.1 is designed to provide precise height compensation between clamping elements and workpieces. With a height range of 23–51 mm, the set removes the need for improvised shimming and repeated adjustments, enabling faster fixture set-up and shorter machine idle time. The numerical values H min: 23 mm and H max: 51 mm indicate the minimum and maximum achievable stack height; the clear range supports predictable results in jigs and vice fixtures. For production environments, this translates into measurable time savings and fewer reworks caused by misalignment. Defined contact dimensions for stable clamping and predictable force distribution The shim geometry is specified by A: 19 mm, B: 30 mm and C: 33 mm, which describe the relevant contact widths and effective seating dimensions. These nominal measures ensure a consistent interface with commonly used clamping components and enable correct load distribution across the contact surfaces. Using defined contact dimensions improves clamping stability and reduces the risk of localised deformation under clamping loads. In practical terms, such predictability supports repeatable precision and simplifies quality assurance procedures. Universality and workflow benefits for workshops and production lines Thanks to its universal application, this shim set suits a wide variety of clamping scenarios in both maintenance and production. The compact Gr.1 format is especially useful where space is restricted or when fine stacking is required to reach exact heights. By adopting standardised shims, procurement and stockkeeping become simpler, and changeovers are quicker because the same set can address multiple fixturing tasks. The result is a pragmatic combination of efficiency and adaptability that aligns with modern lean workflows. For reliable integration into existing jigs and fixtures, contact Metav Werkzeuge for availability and technical assistance at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists will advise on matching the No. 6500E Gr.1 to specific clamping systems. Technical Data Article number: 4000833090NW Typ: Nr. 6500E - 1 Label: Spannunterlage Nr.6500E Gr.1 universell einsetzbar AMF Dimensions / Core Data H min: 23 mm H max: 51 mm A: 19 mm B: 30 mm C: 33 mm Special features / Versions Product type: Clamping shim set Brand: AMF Universal application: yes Packaging unit: 1 FAQ What height range does the shim set cover? The set covers a height range from 23 mm to 51 mm, enabling precise height compensation for a variety of clamping setups. Which contact dimensions define the shim geometry? The key contact dimensions are A: 19 mm, B: 30 mm and C: 33 mm, which determine seating and load distribution characteristics. Is this set suitable for tight or restricted workspaces? Yes. The Gr.1 format is compact and intended for use where space is limited or when fine stacking is required to reach exact clamping heights. Can the No. 6500E be used across different clamping systems? The No. 6500E Gr.1 is described as universally applicable and is compatible with a range of standard clamping arrangements; verification against specific fixture interfaces is recommended. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
24.1mm Centre Tip Type 665 MK3 Solid Point 60° Full Tip 125mm - RÖHM
Take advantage of a classic lathe centre that combines DIN 806‑specification heat treatment with a 60° full point for reliable concentric support; the MK3 shank ensures fast fitting to standard tailstocks, while the hardened and ground finish delivers long service life. Order or request advice via Metav Werkzeuge for procurement and application guidance. Centre Point Type 665 (MK3) – Fixed centre with solid 60° point | RÖHM A Centre Point Type 665 designed for precise axial support in conventional lathes and centre‑turning operations, supplied with a Morse taper MK3 shank for direct tailstock mounting DIN 806, fully hardened and ground Solid 60° centring point Morse taper MK3 shank for secure fit 125 mm overall length, compact projection Accuracy that keeps turned parts concentric The primary advantage of this centring tip is its consistent concentric support, achieved through a 60° full point geometry and a heat‑treated finish in accordance with DIN 806. This combination reduces run‑out during turning and drilling at the tailstock end, which translates into fewer rejected parts and less rework. The component’s geometry is ideal for standard centre bores and for jobs where axial alignment and repeatability are critical. Robust construction for continuous workshop use Manufactured from tool steel and delivered hardened and ground, the unit withstands everyday workshop loads and abrasive contact without premature wear. The fixed solid tip provides a stable contact area that resists deformation under clamping forces, while the hardened surface extends service intervals. The compact design with a 125 mm overall length and 44 mm projection gives a stable support point without excessive cantilever, improving vibration damping on medium‑duty turning tasks. Seamless integration with standard tailstocks and simple upkeep Fitted with a MK3 taper shank, the centre seats directly into compatible tailstocks and live‑centre cones for instant use. Installation requires no special adapters and the fixed construction simplifies inspection and replacement routines. Basic care—periodic cleaning and lubrication of the contact surfaces—keeps the centring tip in optimal condition, supporting uninterrupted production cycles and predictable machining results. For procurement or tailored advice on suitability for specific turning tasks, contact Metav Werkzeuge for prompt technical guidance and ordering assistance Technical Data Article number: 4121011130NW Type: Typ 665 Product: Centre point Brand: RÖHM Shank: MK3 Facts Diameter: 24.1 mm Overall length: 125 mm Projection: 44 mm Point angle: 60° Packaging unit: 1 Special features DIN 806 specification Fully hardened and ground Made from tool steel Solid (full) centre point FAQ What taper does the centre use and how is it mounted? The centre is supplied with a MK3 taper shank and mounts directly into standard MK3 tailstocks or compatible live‑centre adaptors; the Centre Point Type 665 (RÖHM, SKU 4121011130NW) requires no special fittings. Which materials is this centre suitable for supporting during turning? The RÖHM Type 665 centre provides stable axial support for a wide range of turning tasks on non‑hardened workpieces; its hardened and ground tip is intended to resist wear when used with typical lathe materials. How does the 60° point angle affect concentricity? A 60° point angle gives a defined contact geometry that centres workpieces reliably in standard centre bores, improving axial alignment and reducing run‑out compared with blunt or worn tips. What maintenance is recommended to preserve accuracy? Routine cleaning of the contact area, light lubrication where appropriate and inspection for point wear will maintain the centring accuracy of the Type 665; replace the unit once the tip shows visible deformation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
240-1000mm Kreuztische
Kreuztisch | Koordinatenmesstisch - Fühlernocken - Handrad mit Sicherheitmutter - Kühlmittel-Quernut bei Modellen 430/600/800/1000 - Schmierung der Führungsbahnen - Späne-Schutzschuld aus PVC - Abdeckung der Führungsbahnen und SpundelnTechnische Daten- Tischgröße: 240x190mm- Verschiebung (X): 120mm- Verschiebung (Y): -mm- Höhe (C ): 75mm- Basis (D): 155mm- Basis (E ): 195mm- "T" Slots G: 72mm- "T" Slots N°: 3- "T" Slots F: 12mm- "T" Slots I: 22mm- "T" Slots J: 7mm- "T" Slots K: 10mm- Abstand für Befestigung (M): 100mm- Breite der Befestigungsmöglichkeit (N): 9mm- Durchmesser Handrad (P): 62mm- Bewegung je Umdrehung Handrad: 4mm- Ablesung: 0,05mm- Gewicht: 14kg- Max. Beladung Tisch: 55kg
240mm Extension Sleeve MK3xMK4 Hardened Ground, DIN 2187 - TECWERK
Take advantage of a hardened, precision‑ground construction and DIN 2187 conformity to ensure secure, low‑runout tool holding and reliable repeatability in everyday workshop use. Order the part directly via Metav Werkzeuge or consult our technical team for application advice. Extension sleeve DIN 2187 MT3×MT4 — hardened and ground, precision version (TECWERK) An extension sleeve DIN 2187 MT3×MT4 for accurate, secure mounting of tools with Morse tapers in machining and tool‑holding applications. DIN 2187 accuracy version Hardened and ground inside and outside For tools with Morse taper MT3×MT4 Outer diameter 48 mm, length 240 mm Precision retention for Morse‑taper tooling that improves runout and repeatability The sleeve is manufactured to DIN 2187, offering a defined interchangeability level for Morse‑taper tooling. By using a fully hardened body with both inner and outer surfaces ground, the adapter provides a consistent seating surface that reduces radial runout and vibration during spindle rotation. For workshops that rely on repeatable concentricity, this means fewer re‑setups and higher first‑pass accuracy. The DIN reference also simplifies procurement and replacement planning, because compliance with the standard ensures compatibility with other DIN‑rated holders. Engineered to withstand routine workshop stresses and handling Constructed in a precision execution, the sleeve resists wear from repeated mounting and dismounting thanks to its heat‑treated structure. The combination of full hardening and precision grinding translates into extended service life and steady performance under cyclic loads. Where downtime and maintenance budgets are critical, the robust construction lowers the frequency of replacements and contributes to a steadier production flow. The hardened finish also helps preserve the taper geometry that determines how securely a tool is held. Clear compatibility and straightforward fitting for Morse taper toolsets Designed specifically for use with tools that have a Morse taper, the adapter matches an outer MT3 taper to an inner MT4 taper, allowing smaller spindles or adaptors to accept larger Morse‑taper tooling where required. Installation is mechanical and familiar to experienced machinists: insert, seat and secure per usual workshop practice. For those less familiar with taper standards, a Morse taper is a self‑locking conical fitting that locates and centres tooling without separate clamping, providing a clean mechanical interface when dimensions and finish are correct. Standard conformity and measurable dimensions for planning and inventory The adapter’s measurable attributes support planning and machine setup: an outer diameter of 48 mm, an overall length of 240 mm and a seated length of 146 mm are provided to verify clearance and reach in chucks, spindles and toolposts. These numeric data facilitate tool‑table checks and ensure the sleeve integrates into existing tooling systems without guesswork. Choosing a DIN‑specified component simplifies procurement, since parts from different suppliers that conform to the same standard are functionally compatible. For machining operations that value secure seating and long‑term stability, contact Metav Werkzeuge to arrange supply or technical clarification on the TECWERK DIN 2187 extension sleeve — our specialists in Emmerich can advise on fitment and stock availability. Technical Data SKU: 2000832362NW Standard: DIN 2187 Product: Extension sleeve (DIN 2187) Brand: TECWERK Facts Outer diameter: 48 mm Overall length (L2): 240 mm Seated length (L1): 146 mm Inner taper: MT4 Outer taper: MT3 Packaging unit: 1 Special features Accuracy execution (precision version) Fully hardened construction Inner and outer surfaces ground For tools with Morse taper FAQ Is this sleeve compatible with standard Morse‑taper tools? Yes. The extension sleeve is specified to DIN 2187 and designed to adapt between an outer MT3 taper and an inner MT4 taper, allowing standard Morse‑taper tooling to be used where this adapter is fitted. What are the key benefits of the hardened and ground finish? The hardened, ground surfaces on the sleeve reduce wear and maintain taper geometry, which improves seating accuracy and lowers radial runout for more consistent machining results with the TECWERK adapter. Which dimensions should be checked before ordering the sleeve? Confirm spindle or holder clearance against the sleeve’s outer diameter of 48 mm and overall length of 240 mm, and ensure the seated length of 146 mm fits within the available mounting space. Does the sleeve require special maintenance? Routine inspection for burrs or contamination and gentle cleaning of the mating tapers is recommended; the hardened and ground finish is designed for longevity under normal workshop use. Can the adapter be used for heavy‑duty turning and milling operations? The sleeve’s hardened construction and precision grinding are intended to sustain regular workshop loads; specific suitability depends on the intended cutting parameters and machine rigidity. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com