Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
22500 Kg Load Shock Absorber M20x84L, 200x160.5x182mm - Vertex
Take advantage of the combination of high load capacity, compact footprint and robust mass to reduce impact stresses and protect machinery components; order the unit directly via Metav Werkzeuge or ask our consultants for specification advice. VSA-150H Industrial Shock Absorber — 22,500 kg capacity, M20×84L thread (Vertex) the VSA-150H is an industrial shock absorber designed to absorb high-energy impacts in heavy machinery and automated installations, delivering reliable energy dissipation in a compact housing High load capacity 22,500 kg M20×84L threaded connection Compact dimensions 200×160.5×182 mm Robust mass: 9.32 kg Heavy-duty impact control for longer equipment life The industrial shock absorber offers a rated maximum load of 22,500 kg, enabling effective deceleration of moving masses and reduction of peak forces transmitted to machine frames. By converting kinetic energy into controlled resistance, the unit reduces mechanical shock and contributes to longer service intervals for bearings, guides and welded structures. The measured load rating provides a verifiable basis for selecting a damper that matches inertia and operating speed for high-demand production environments. Accurate mounting and space-saving installation Equipped with a M20×84L threaded connection and a compact footprint of 200×160.5×182 mm, the component is designed for straightforward integration into existing mounting schemes. The standardised thread ensures compatibility with common machine fixtures, while the compact dimensions facilitate retrofit installation where space is limited. At a weight of 9.32 kg, the damper provides sufficient mass for stability without imposing excessive load on mounting points, supporting predictable assembly and alignment. Reduced vibration and improved process stability By providing consistent vibration damping and controlled energy absorption, the damper helps to minimise cycle-to-cycle variation and unscheduled stoppages. The mechanical action of the unit smooths deceleration events and mitigates the transmission of shock into sensitive components, which in turn supports repeatable production quality and reduced secondary maintenance. Where machine uptime and component reliability are priorities, the protective effect of a correctly specified damper directly contributes to operational efficiency. Versatile use in industrial assemblies and automation The device is suited to a range of heavy-duty applications including press stops, end-of-stroke cushioning, automation cells and protective buffer systems for material-handling equipment. Its specification allows system designers to match the damper to dynamic load cases and mounting constraints, enabling targeted protection of critical subassemblies. For procurement and system planning Metav Werkzeuge provides access to stock and technical consultation to support selection and supply for industrial workshops and manufacturing plants. Choose the Vertex VSA-150H for dependable heavy-duty damping and contact Metav Werkzeuge in Emmerich for tailored technical advice and supply coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VSA-150H GTIN: 4061905089091 Manufacturer: Vertex Facts Maximum load: 22,500 Kg Dimensions: 200×160.5×182 mm Weight: 9.32 kg Thread: M20×84L ECLASS: 27291201 Special features Designation: Shock absorber SKU: VSA-150H Brand: Vertex FAQ What is the maximum load capacity of this shock absorber? The unit has a rated maximum load capacity of 22,500 kg, specified for the Vertex VSA-150H industrial shock absorber. Which thread is used for mounting? Mounting is via an M20×84L threaded connection as specified for the VSA-150H. What are the external dimensions and weight? The damper measures 200×160.5×182 mm and weighs 9.32 kg, allowing compact integration. Which applications suit this type of damper? Typical uses include press stops, end-of-stroke cushioning and automation buffering where high-energy impacts require controlled deceleration. Is the VSA-150H compatible with standard machine fixtures? Yes; the standard M20 thread and compact footprint support compatibility with common fixtures and retrofit scenarios. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
225mm Ejector for Morse Taper MK4 DIN 317 - TECWERK
Robust compliance with DIN 317, compatibility with Morse taper MT4 and a 225 mm overall length combine to deliver dependable removal of tool tapers while reducing machine downtime; order the taper drift directly via Metav Werkzeuge or ask our consultants if needed. Taper Drift DIN 317 for Morse taper MT4 – 225 mm (TECWERK) The Taper Drift DIN 317 for Morse taper MT4 is a purpose-made tool for releasing tool tapers from standardised spindles and holders in workshops and maintenance shops. Complies with DIN 317 For Morse taper MT4 Overall length 225 mm Fits standard tool tapers Faster, safer taper removal for productive workshops Engineered to the DIN 317 guideline, this taper drift delivers consistent engagement with standardised tapers, cutting the time needed to free lodged tool tapers and minimising potential damage to holders. The controlled geometry of the taper drift ensures predictable force transmission, so maintenance cycles run more smoothly and toolroom throughput is improved. The clear standard conformity also simplifies planning and spare-part logistics. Designed for compatibility with standard tool tapers Conformity with both DIN 317 and compatibility for tool tapers to DIN 228 means the tool matches common workshop interfaces. Compatibility with Morse taper MT4 guarantees the correct fit for a wide range of drills and arbors that use this taper size. For technicians and buyers this standard alignment reduces the need for trial-and-error, enabling quick identification of the correct extraction tool and streamlining inventory management in the workshop. Practical handling that reduces downtime At 225 mm overall length the drift provides sufficient reach for deeper-seated tapers while remaining compact enough for routine handling. The simple geometry allows controlled, repeatable strikes that reduce the risk of skewed impacts and consequent damage. In everyday use the extraction tool is straightforward to store and combine with existing tool-maintenance workflows, supporting quicker turnarounds and less idle machine time — a direct efficiency gain for production and service teams. Who benefits and where it fits best Maintenance technicians, toolroom staff and production engineers benefit from a standardised, rugged extraction tool that integrates with common holders and arbors. The combination of recognised standards, practical length and straightforward use makes the drift well suited to industrial workshops, service benches and tooling rooms where repeatable, low-risk extraction is essential. For specific application queries, Metav Werkzeuge’s consultants can advise on compatibility and availability. For availability and tailored advice on the TECWERK taper drift for Morse taper MT4, contact Metav Werkzeuge for rapid delivery from Emmerich and technical guidance – phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000832763NW Standard: DIN 317 Type: Taper drift Label: Austreiber DIN 317 MK4 z.Werkzeugkegel Manufacturer: TECWERK Facts Total length: 225 mm Packaging unit: 1 Special features For tool taper according to DIN 228 Suitable for Morse taper MT4 Fits standard tool tapers Complies with DIN 317 FAQ Is this taper drift compatible with MT4 tool holders? The taper drift described is designed for Morse taper MT4 and is supplied by TECWERK (SKU 4000832763NW), making it suitable for MT4 arbors and holders that adhere to the corresponding standards. What does the DIN 317 standard guarantee? DIN 317 specifies dimensions and functional requirements for extraction devices of this type; the Taper Drift DIN 317 for Morse taper MT4 meets these requirements, ensuring standardised fit and predictable performance. Will the 225 mm length reach deep-seated tapers? With an overall length of 225 mm, the drift provides additional reach compared with shorter variants, allowing access to deeper-seated tapers while remaining manageable for routine workshop use. Which users and workplaces benefit most from this tool? The extraction tool is aimed at maintenance technicians, toolroom personnel and production engineers who work with Morse tapers and require a reliable, standards-compliant method to dislodge tool tapers without risk to holders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
225mm Hydraulic Machine Vise 40 kN Clamping Force 0.01 mm Accuracy, Cast Iron - Vertex
Compact, robust and precise: the hydraulic machine vice blends a 40 kN clamping capacity with a 0–225 mm jaw opening and a cast‑iron body to secure workpieces during machining. Order the VNC‑125H directly via Metav Werkzeuge or consult our specialists for application guidance. VNC-125H Hydraulic machine vice by Vertex — 40 kN clamping, 0–225 mm opening The VNC-125H is a hydraulic machine vice engineered for secure, repeatable clamping in milling and machining operations. Hydraulic actuation for uniform clamping 40 kN maximum clamping force Wide opening 0–225 mm Cast iron body for stability Consistent, high‑force clamping to cut machining time The hydraulic drive delivers a repeatable clamping action that stabilises the workpiece during cutting. With a rated clamping force of 40 kN, the vice reduces the risk of movement under load, which helps to lower scrap rates and shorten rework time. The hydraulic mechanism maintains even pressure across the jaws, so set‑up becomes a predictable process and cycle times remain consistent — a clear rational advantage for production environments where throughput and quality must align. Stable construction that supports accurate results Constructed from cast iron, the vice provides mass and damping to absorb cutting forces and vibrations. This solidity, combined with the specified accuracy of 0.01 mm, supports tight tolerance work and repeatable positioning. The combination of weight and material contributes to process stability on the machine table, meaning fewer interruptions for clamp adjustments and a steadier surface finish on the component. Flexible jaw range for a broad range of parts A jaw opening of 0–225 mm offers practical versatility for small to medium workpieces, enabling one vice to serve multiple clamping tasks without frequent tool changes. The vice’s proportions and jaw capacity make it suitable for varied batches and mixed runs, supporting flexible production layouts. Where setups change regularly, this adaptability reduces fixture inventory and simplifies job planning. Designed for integration and low upkeep The vice’s compact footprint and measured dimensions allow straightforward placement on machine tables while its hydraulic operation minimises manual torque variation between cycles. Routine maintenance is limited to standard checks of hydraulic connections and jaw faces; this keeps downtime predictable and maintenance effort low. For operations seeking reliable clamping with simple upkeep, the vice fits into existing workflows without complex retrofitting. Choose the Vertex VNC-125H for dependable hydraulic clamping and contact Metav Werkzeuge in Emmerich for personalised application advice and prompt supply — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data SKU: VNC-125H GTIN: 4061905087417 ETIM: EC002173 ECLASS: 21020601 Facts Opening range: 0–225 mm Clamping force: 40 kN Weight: 37 kg Accuracy: 0.01 mm Dimensions: 124 x 556 x 126 mm Special features Material: Cast iron Type: Hydraulic Category: Hydraulic machine vice Brand: Vertex Product images and technical drawing available FAQ Which materials can be clamped reliably with this vice? The Vertex VNC‑125H hydraulic machine vice is suited to a wide range of machined materials; its 40 kN clamping force and solid cast‑iron body provide stable holding for typical metals used in milling and turning. What is the maximum jaw opening of the vice? The vice offers a jaw opening of 0–225 mm, giving flexibility for varied workpiece sizes without frequent fixture swaps. How precise is the positioning when clamping components? Positioning precision is specified as 0.01 mm, supporting work where close tolerances and repeatability are required. Is the vice suitable for heavy milling operations? The combination of hydraulic clamping, 40 kN force and a cast‑iron construction makes the vice appropriate for demanding milling tasks where firm, vibration‑resistant holding is necessary. What are the physical dimensions and mass of the unit? The vice measures 124 x 556 x 126 mm and weighs 37 kg, allowing assessment of machine table loading and compatibility. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
225mm Milling Arbor Wrench DIN 6368 For 27mm Arbor, Hardened Special Steel - TECWERK
Take advantage of a robust, standards‑compliant tool that combines DIN 6368 conformity with a hardened, blued finish and a practical 225 mm length for dependable tightening and loosening of milling arbor drawbar screws; order or request advice via Metav Werkzeuge for seamless workshop integration. Milling arbor wrench DIN 6368 — for arbor Ø 27 mm (TECWERK) The milling arbor wrench DIN 6368 designed for tightening and loosening milling arbor drawbar screws, suitable for arbors with a 27 mm diameter and workshop use Conforms to DIN 6368 Suitable for arbor Ø 27 mm Hardened special steel, blued finish 225 mm overall length Secure clamping through standardised design A tool engineered to meet DIN 6368 ensures consistent, reproducible results when securing milling cutters. The standardised geometry reduces the risk of incorrect engagement with drawbar screws and supports reliable torque application. By using a wrench that matches recognised norms, machine changeovers become more predictable and process control improves, which in turn reduces rework and downtime. The clear alignment to standards delivers a measurable increase in operational consistency for production environments. Durable construction for everyday workshop use Crafted from special steel, the tool is hardened and finished in a blued tone to provide corrosion resistance and wear protection during repeated use. This robust treatment extends service life in harsh conditions and supports long intervals between replacements, making the wrench a cost‑effective choice for maintenance teams. The solid construction contributes to dependable mechanical behaviour when tensioning and loosening fastenings, reducing the likelihood of deformation under load. Straightforward compatibility with common arbor sizes Designed specifically for arbors of 27 mm diameter, the wrench matches the seating and engagement requirements of typical milling drawbar screws produced to DIN 6367 dimensions. The defined fit minimises stripping and slippage, which helps preserve both the tool and the arbor interface. Clear specification reduces the time spent verifying suitability: technicians can identify compatibility from the marked diameter and the referenced standard, simplifying tool allocation in mixed‑equipment workshops. Ergonomic handling and practical dimensions With an overall length of 225 mm, the tool balances reach and control for both bench and machine‑mounted operations. The length offers sufficient leverage for efficient torque application without compromising manoeuvrability in confined setups. The compact but solid profile supports fast, repeatable interventions during cutter changes, contributing to smoother workflow in milling operations. The familiar form factor integrates easily into existing tool trolleys and maintenance kits, supporting rapid access when needed. For reliable tightening and loosening of milling arbor drawbar screws, request the TECWERK milling arbor wrench via Metav Werkzeuge — contact our advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for precise application guidance and supply from Emmerich. Technical data Article number: 4000832447NW Type: Milling arbor wrench Standard: DIN 6368 Core specifications Overall length: 225 mm Suitable for arbor diameter: 27 mm Application: tightening and loosening milling arbor drawbar screws Materials / Special features Special steel, hardened and blued finish Conforms to DIN 6367 dimensions where applicable Pack unit: 1 FAQ What is the intended use of the wrench? The wrench is intended for tightening and loosening milling arbor drawbar screws and is specified for this application in the product documentation. Which arbor diameter does the tool fit? The tool fits arbors with a 27 mm diameter; compatibility is stamped and listed to ensure correct selection. Is the wrench suitable for continuous industrial use? The hardened special steel construction and blued finish make the wrench suitable for regular workshop use and repeated tool changes. Does the tool comply with recognised standards? Yes, the wrench is manufactured to DIN 6368 and intended to be used in conjunction with drawbar screws produced to DIN 6367. What is the overall length and why does it matter? The overall length is 225 mm, which provides a balance of leverage and accessibility for typical milling setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
225mm Three-Point Closure Clamping Spindle With Extended Arm, 15kN Thrust / 17kN Holding, Galvanised - Kukamet
Take advantage of a high‑force, corrosion‑resistant clamp that combines secure vertical mounting and extended reach for demanding fixtures; the combination of a 225 mm special arm, 15,000 N pressing force and a durable zinc finish ensures reliable cycle‑to‑cycle performance in production. Order the toggle clamp directly via Metav Werkzeuge or ask our consultants if needed. Toggle clamp 333 (333-4-L-M12-C1) — Vertical‑base lever clamp with extended special arm The Toggle clamp 333 is a vertical‑base latch clamp designed for fixture and jig applications where deep or offset clamping is required, offering high pressing and holding forces for secure workholding. Vertical base for secure vertical mounting Extended 225 mm special arm for deep clamping Zinc‑plated finish for corrosion resistance 15 kN pressing force, 17 kN holding capacity Secure, high‑force workholding for stable production Designed for demanding clamping tasks, this lever clamp delivers a rated 15,000 N pressing force and a 17,000 N holding capacity, providing measurable stability for repetitive operations. The stated forces translate into less fixture slippage and fewer rejected parts, improving throughput and reducing rework. The mechanical locking action limits creep under load, so the clamp maintains position without continuous operator input — a practical way to raise process reliability in small series and larger production runs. Reach and mounting flexibility for complex jigs The extended 225 mm special arm and a thread length of 250 mm give additional reach and fine adjustment capability for awkward or deep fixtures. Mounted on a vertical base, the clamp suits upright or panel fixtures where access is restricted from above. The integrated hook allows rapid engagement with mating components, simplifying cycle set‑up and change‑over. For bespoke fixtures, the combination of arm length and thread adjustability enables precise pressure distribution across irregular workpieces. Durable finish and low‑maintenance operation A zinc‑plated surface treatment provides good corrosion resistance in workshop environments, reducing the frequency of surface maintenance and preserving appearance and function over time. At a mass of 1.07 kg, the device balances robustness with easy handling during assembly into jigs or production cells. The simple lever mechanism minimises service points; routine inspection and light lubrication are generally sufficient to sustain reliable performance, supporting long service life and dependable uptime. Choose the Kukamet toggle clamp for robust, high‑reach clamping in production — available from Metav Werkzeuge with technical advice from our Emmerich team. Technical data Article number: 333-4-L-M12-C1 GTIN: 8682843520994 SKU: 333-4-L-M12-C1 Manufacturer: Kukamet Facts Pressing force max: 15,000 N Holding force max: 17,000 N Arm length: 225 mm Thread length: 250 mm Weight: 1.07 kg ECLASS: 21041718 ETIM: EC011973 Special features Material: zinc‑plated Mounting type: vertical base With hook Extended special arm Category: clamp / toggle clamp FAQ What is the maximum clamping force of this clamp? The clamp provides a pressing force of 15,000 N and a holding capacity of 17,000 N, suitable for high‑force fixture applications. Can the clamp be mounted on vertical fixtures? Yes, the vertical base is specifically designed for secure vertical mounting in jigs and panels. How much reach does the clamp offer for recessed workpieces? The extended arm measures 225 mm and the thread length is 250 mm, giving significant reach and fine adjustment for deep or offset workpieces. Is the clamp suitable for workshop environments with occasional moisture? The zinc‑plated finish offers corrosion resistance appropriate for typical workshop conditions; periodic inspection and light lubrication will extend service life. What is the SKU for ordering and spare part references? Ordering and reference information is under SKU 333-4-L-M12-C1 for this Kukamet toggle clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
225x100 Cross Table Mini Compact Precision Stage - SAIM
Take advantage of precise X–Y positioning, a compact 225 x 100 mm table top and a low 93 mm profile for tight setups; the construction delivers stable handling with a manageable 10 kg mass. Order the SAIM Mini Cross Table directly via Metav Werkzeuge or ask our consultants if needed. SAIM Mini Cross Table (SAIM-225XYG) — compact X–Y positioning table with 225 x 100 mm top The SAIM Mini Cross Table is a compact X–Y positioning table designed for precise small-part machining, inspection and assembly tasks in constrained workshop environments. Compact 225 x 100 mm table top Low-profile 93 mm height Stable 10 kg construction Smooth X–Y travel Precision where space is limited and repeatability matters The compact 225 x 100 mm table top and low 93 mm profile concentrate accuracy into a small footprint, making this unit ideal where bench space is scarce. The design focuses on stable X–Y positioning, reducing play and supporting repeatable micro-adjustments during delicate tasks. For applications such as light milling, measuring setups or fixture adjustments, the tight geometry means parts remain accessible while maintaining alignment, so cycle times can be reduced without sacrificing positional reliability. Simple integration and intuitive handling for faster workflows A straightforward mechanical layout and modest mass (10 kg) enable quick placement on workbenches or inside inspection stations. The table’s dimensions and construction support easy fixturing and straightforward clamping, allowing integration into existing production jigs or measurement rigs. Clear mechanical behaviour and direct control of both axes contribute to fewer setup iterations, which translates into measurable time savings and a smoother throughput in small-batch production and prototyping tasks. Built to provide lasting stability in everyday workshop use Although compact, the unit’s build prioritises rigidity to minimise vibration and deflection under light loads. The arrangement of guideways and travel geometry is aimed at consistent motion quality across the full stroke, supporting accurate alignment for inspection or machining steps. This resilience helps protect surface finishes and keeps repeat measurements within tighter tolerances, supporting quality assurance routines in small and medium workshops. Practical benefits for inspection, assembly and light machining The mini cross table is particularly useful where component orientation and micro-adjustments are critical: aligning parts for microscopes, positioning small items for soldering or adjusting tools in prototype work. Its compact footprint conserves bench space while the measured travel enables precise lateral and longitudinal corrections. For teams seeking a straightforward mechanical solution for positional control, the combination of compact size and reliable motion control makes the unit a pragmatic choice. Choose the SAIM Mini Cross Table for compact, accurate X–Y positioning and contact Metav Werkzeuge in Emmerich for personalised advice and reliable supply from our European distribution hub Technical data Article number: SAIM-225XYG GTIN: 4061905082351 Manufacturer: SAIM Dimensions & weight Table top: 225 x 100 mm Height: 93 mm Weight: 10 kg Product details & assets Product label: Kreuztisch Mini Images: model photo, technical drawing, top view available Gallery file: saim_draw_x.jpg FAQ What is the usable table area of the cross table? The SAIM Mini Cross Table (SKU SAIM-225XYG) features a 225 x 100 mm table top suited for small-workpiece positioning. Can the table be used for inspection and measuring setups? Yes, the compact X–Y table is suitable for inspection and light measuring tasks where precise lateral and longitudinal adjustment is required. How much space does the unit need on a workbench? With a low profile of 93 mm and the compact tabletop dimensions, the unit occupies minimal bench space while allowing easy access to mounted parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
225x100 Cross Table Mini, 50.5mm Height - SAIM
Take advantage of the compact 225 x 100 mm platform and the low 50.5 mm profile for precise setups in restricted spaces; the solid 6 kg construction provides stability for repeatable results. Order the SAIM-225X directly via Metav Werkzeuge or request individual application advice from our consultants. SAIM-225X Mini Cross Table – 225 x 100 mm platform, low 50.5 mm profile The SAIM-225X is a compact manual cross table designed for fine X–Y positioning in small milling, drilling and inspection tasks, offering a small footprint and stable support for precision work. Compact 225 x 100 mm platform Low profile: 50.5 mm overall height Solid construction, 6 kg mass Precise manual X–Y positioning Optimised footprint for small workshops and precise fixtures The compact design and defined dimensions deliver a small working footprint while keeping the mounting surface generous enough for fixtures and vice clamps. With a 225 x 100 mm platform and an overall height of 50.5 mm, this table fits close to tools and measuring heads, enabling shorter tool overhang and a lower centre of gravity. The result is improved accessibility on crowded benches and easier alignment when combining the table with small mills, drill stands or inspection stages. Controlled manual positioning for repeatable set-ups A manual cross table promotes exact incremental movement for alignment and measuring operations. The SAIM unit provides smooth, controllable travel in both axes that supports precision fixturing and indexing tasks. Where stepwise adjustment or fine visual alignment is required, the mechanical simplicity reduces potential error sources and simplifies calibration routines. This configuration is ideal for workshop tasks that demand consistent, verifiable positioning rather than motorised automation. Mass and stability that improve machining consistency A heavier, well-balanced table absorbs incidental vibration and helps maintain position under light cutting forces; the 6 kg mass of this mini cross table enhances stability and promotes repeatability during short runs or setup verification. For operations such as small-diameter drilling, delicate reaming or optical inspection, the additional damping provided by the mass reduces chatter and improves surface and positional consistency. The compact construction also simplifies integration with clamping systems and measurement devices. For compact precision applications, choose the SAIM-225X and contact Metav Werkzeuge in Emmerich for tailored application advice and supply options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: SAIM-225X GTIN: 4061905082191 Name: Mini cross table (Kreuztisch Mini) Facts Platform dimensions: 225 x 100 mm Overall height: 50.5 mm Weight: 6 kg ECLASS: 21041714 Special features Manufacturer: SAIM Gallery image available: saim_draw_x.jpg UID: SAIM-225X FAQ What are the platform dimensions of this cross table? The platform measures 225 x 100 mm, providing a compact working area suited to small fixtures and clamps. What is the overall height of the unit? The overall height is 50.5 mm, allowing close mounting beneath tool heads and convenient access for low-profile setups. How heavy is the table and why does that matter? The table weighs 6 kg, which gives improved stability and vibration damping for more consistent machining and inspection results. Is this product suitable for bench-top milling and drilling tasks? Yes, the SAIM-225X mini cross table is intended for small milling, drilling and inspection tasks where manual, repeatable positioning is required. Are images and technical drawings available? Yes, gallery images and a technical drawing are supplied (e.g. saim_draw_x.jpg) to aid integration and fixture planning. Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
225x100 Cross Table Mini, Compact Manual Table - SAIM
Compact, bench-friendly positioning for precise light-duty work: the combination of a 225 x 100 mm platform, low-profile 68.5 mm height and an 8 kg mass delivers stable, repeatable movement for small machining, drilling or inspection tasks; order the unit directly via Metav Werkzeuge or consult our advisors for application support. SAIM Mini cross slide table – Compact 225 x 100 mm platform with low profile The SAIM Mini cross slide table is a compact positioning table designed for precise XY movement in small-scale machining, drilling and inspection applications. Compact 225 x 100 mm travel platform Low-profile height 68.5 mm for bench use Stable 8 kg construction for precise movement Precise positioning from a compact footprint The mini cross slide provides precise positioning while occupying minimal bench space. With a platform dimension of 225 x 100 mm, the table is suitable for accurate alignment and incremental adjustment of small workpieces and fixtured parts. A low profile of 68.5 mm reduces centre height, helping maintain stability during light machining or measuring tasks. The combination of compact size and solid mass results in improved vibration damping and repeatable movement for routine positioning operations. Built for straightforward integration into small workshops Engineered for bench-top use, this table adapts easily to inspection benches, drill stands or small milling setups. At 8 kg, the unit is heavy enough to remain stable under hand-fed operations yet light enough for repositioning when the workflow demands flexibility. The simple footprint and standard mounting options allow for rapid installation on a variety of shop surfaces, enabling fast setup and reducing downtime. This practicality supports an efficient workflow without compromising on positional accuracy. Practical benefits for everyday workshop tasks Beyond dimensions, the mini cross slide emphasises usability: fine adjustment capability aids repeatable drilling, minor milling and assembly alignment, while the compact design frees valuable bench space for other tools. For small-batch production, prototyping or quality inspection tasks, the table offers a cost-effective way to improve process consistency. The device’s straightforward mechanical concept makes maintenance uncomplicated and supports long-term, dependable operation in a light industrial environment. For application advice or to discuss how the SAIM Mini cross slide table can improve workshop precision, contact Metav Werkzeuge—info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and supply options Technical Data Article number: SAIM-225XG GTIN: 4061905082344 Manufacturer: SAIM Facts Platform dimensions: 225 x 100 mm Height: 68.5 mm Weight: 8 kg eClass: 21041714 Versions / Files Product label: Kreuztisch Mini Gallery image: saim_draw_x.jpg Technical drawing: saim-150x-technische-zeichnung.jpg FAQ What are the main dimensions of the table? The platform measures 225 x 100 mm and the overall height is 68.5 mm for the SAIM Mini cross slide table (SKU SAIM-225XG). Is the table suitable for bench-top drilling and light milling? Yes; the unit’s compact footprint and stable 8 kg mass make it suitable for bench-top drilling, light milling and alignment tasks where precise positioning is required. How portable is the device for shop reconfiguration? Weighing 8 kg, the table balances stability with portability so it can be repositioned on the workshop bench when workflows change. Are technical drawings available? A technical drawing (saim-150x-technische-zeichnung.jpg) is included in the product files to assist with mounting and integration planning. Which applications benefit most from this table? Precision inspection, small-batch machining, prototyping and assembly alignment benefit most from the compact, repeatable XY travel of this mini cross slide. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
225x100 Mini Cross Table Precision XY Stage, 75mm Height - SAIM
Take advantage of a compact design that combines stable mass, a 225 x 100 mm platform and a low profile for precise bench-top positioning; ideal for repeatable alignment and inspection tasks. Order the SAIM-225XY directly via Metav Werkzeuge or consult our specialists for application advice. SAIM-225XY Mini cross table — Compact 225 x 100 mm platform, 75 mm height The SAIM-225XY is a compact mini cross table engineered for precise, repeatable positioning of small components on workshop benches and inspection stations. Compact XY travel 225 x 100 mm Rigid construction for stable positioning Low profile 75 mm height 9 kg mass for vibration damping Precise positioning in a compact footprint A compact cross table with a 225 x 100 mm platform offers reliable positioning where bench space is limited. The combination of a low overall height (75 mm) and solid mass (9 kg) reduces susceptibility to external vibrations and improves steadiness during measuring, marking or light machining tasks. The design supports accurate alignment of small parts without requiring a large machine base, enabling a wide range of inspection and assembly operations on a standard workbench. This compact stage is particularly useful where repeatability and space economy are priorities. Improved workflow through stability and integration Integrating a mini cross table into an existing workflow reduces handling and repositioning time; the stable platform lets components be set, measured and adjusted with fewer interruptions. The stable mass of the unit dampens incidental movement, which contributes to more consistent measurement and setup results. For atelier-style workshops and small production cells, the cross table functions as a practical positioning aid that complements microscopes, inspection fixtures and manual machining stations, simplifying routine processes while maintaining precision. Documentation and service for confident use Clear technical drawings and gallery images are available to support planning and mounting decisions, helping to match the stage to specific setups. Metav combines decades of precision expertise with broad product availability, offering access to technical advice and reliable delivery from Emmerich. The product’s compact dimensions and robust construction make it a long-term asset for inspection benches and small-scale production lines, providing dependable positioning without complex installation requirements. Contact Metav Werkzeuge for application guidance or to arrange procurement: info@metav-werkzeuge.com | +49 2822 7131930 — assistance available for technical queries and order planning Technical data Article number: SAIM-225XY GTIN: 4061905082207 Product name: Mini cross table (SAIM) Facts Platform dimensions: 225 x 100 mm Height: 75 mm Weight: 9 kg ECLASS: 21041714 Special features Manufacturer: SAIM Gallery images and technical drawing available in assets Compact design for bench-top use FAQ What are the platform dimensions and height? The SAIM-225XY mini cross table features a platform of 225 x 100 mm and an overall height of 75 mm, providing a low-profile solution for bench-top positioning. How much does the unit weigh and why does that matter? The unit weighs 9 kg; this mass improves vibration damping and contributes to steadier positioning during measurement and light processing tasks with the SAIM-225XY mini cross table. Is the SAIM-225XY suitable for inspection and assembly benches? Yes, the SAIM-225XY mini cross table is designed for precise positioning on inspection, assembly and measurement benches where a compact, stable stage is required. Are there images or technical drawings available to aid installation planning? Gallery images and a technical drawing are supplied with the product data to support planning and mounting choices for the SAIM-225XY mini cross table. Can Metav provide technical advice for application-specific requirements? Metav Werkzeuge offers consultancy and technical guidance to help determine whether the SAIM-225XY fits a particular application and to assist with ordering and integration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2270N Three-Point Push Rod Clamp With Spring, Galvanised 2200N Thrust Capacity - Kukamet
Take advantage of the combination of high clamping force, compact design and zinc‑plated corrosion resistance for reliable fixture holding in production and assembly. Order the clamp directly via Metav Werkzeuge or contact their consultants for integration advice. 511 Push‑rod clamp with horizontal base and spring action — Kukamet The 511 push‑rod clamp is a compact clamping element designed for secure horizontal mounting in fixtures and jigs, offering rapid spring‑assisted engagement for repeatable workholding. *Horizontal base for stable mounting *Spring‑loaded action for quick clamping *Max clamping force 2,200 N *Zinc‑plated corrosion resistance Consistent holding for faster, safer setups The spring‑loaded mechanism delivers immediate clamp engagement, reducing cycle times in repetitive operations while maintaining a reliable holding force. With a maximum clamping force of 2,200 N and a holding force of 2,270 N, this compact device ensures workpieces remain stable during machining, assembly or inspection, improving throughput and reducing rework. The combination of fast action and strong retention supports efficient production sequences where repeatability is essential. Compact mounting that saves fixture space Featuring a horizontal base, the clamp integrates easily into existing jigs and tooling plates without adding excessive bulk. The low mass of 1.03 kg and compact footprint make this clamp suitable for confined tooling arrangements and lightweight fixtures. The zinc‑plated finish provides corrosion resistance, extending service life in workshop environments and reducing the frequency of maintenance interventions, which supports continuous operation in demanding production schedules. Clear specifications for straightforward integration Key technical attributes such as zinc‑plated material, horizontal mounting and a built‑in spring simplify selection and installation. The clamp’s robust construction offers predictable performance under cyclic loading, while the defined 2,200 N clamping capacity and measured 2,270 N holding force allow planners to calculate safety margins and fixture requirements with confidence. Where documentation is required, the model is listed under SKU 511-6-Y and GTIN 8680731506112 for procurement and inventory control. For tailored advice on using the Kukamet 511 push‑rod clamp in specific fixtures or for purchasing through Metav Werkzeuge, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — their specialists will advise on technical fit and delivery. Technical data SKU: 511-6-Y GTIN: 8680731506112 Manufacturer: Kukamet Weight: 1.03 kg Material: zinc‑plated Mounting: horizontal base Clamping force max: 2,200 N Holding force max: 2,270 N Special feature: with spring eClass: 21041716 ETIM: EC011973 Facts Category: clamp (spanner) Product type: push‑rod clamp Model designation: 511 SKU reference: 511-6-Y Special features Spring‑assisted engagement Zinc‑plated finish for corrosion protection Compact footprint for tight fixtures Suitable for repetitive production and assembly tasks FAQ What maximum clamping force does this clamp provide? The clamp delivers a maximum clamping force of 2,200 N, with a holding force rated at 2,270 N, suitable for typical fixture and assembly applications. Is the clamp suitable for horizontal mounting in fixtures? Yes. The design includes a horizontal base intended for secure attachment to fixture plates and jigs. What material and surface treatment does the device have? The component is zinc‑plated, offering improved corrosion resistance for workshop environments. How heavy is the clamp and how does that affect fixture design? Weighing 1.03 kg, the clamp is compact and lightweight, simplifying integration into smaller or portable fixtures without significantly increasing mass. Can the clamp be used in high‑cycle automated processes? The spring‑assisted action and robust holding figures make the clamp well suited to repetitive cycles; designers should verify compatibility with actuation timing and fixture dynamics. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
22mm 5C Collet For Precision Workholding, High Accuracy 0.02mm - Vertex
Benefit from precision clamping with a 22 mm nominal diameter, 0.02 mm runout accuracy and a compact 87 mm body for consistent machining results; order the collet directly via Metav Werkzeuge or contact our advisers for tailored guidance. Vertex 5C-22 Collet — 22 mm, 0.02 mm runout accuracy The 5C-22 collet is a precision clamping component for standard 5C toolholders, engineered to deliver repeatable concentricity in workshop and production workholding. High clamping accuracy 0.02 mm Standard 5C tooling interface Nominal diameter 22 mm Compact 87 mm length, 0.21 kg Reliable concentricity for demanding machining The core advantage of this clamping component is its consistent runout accuracy, specified at 0.02 mm, which translates into reduced vibration and improved surface finish during turning, milling or drilling operations. Achieving low radial runout is essential when producing tight-tolerance parts: a stable chucking element minimises tool deflection and repeat machining. The design supports process reliability and helps maintain predictable batch quality over repeated cycles. Standard 5C interface for flexible workholding The unit adopts the widely used 5C standard, enabling straightforward integration with existing spindles and collet chucks common in toolrooms and production lines. Standardisation reduces changeover time and inventory complexity while retaining high precision. The combination of a standard interface and precise internal geometry delivers secure gripping of cylindrical tools and workpieces, supporting efficient setups and repeatable clamping force across different operations. Compact format improves accessibility and handling With a length of 87 mm and a mass of 0.21 kg, the item offers compact dimensions that are advantageous where space is limited or where quick manual handling is required. A shorter clamping element can improve access to confined fixturing arrangements and reduce overhang, which helps preserve concentricity under load. The modest weight also makes handling and rapid tool changes effortless during busy shop-floor routines. Practical identification and traceability For inventory control and procurement the collet is listed under SKU 5C-22 and carries GTIN 4061905090127, allowing clear documentation in purchasing and production systems. The eClass code provided helps classification within technical catalogues. Traceable identifiers support quality management procedures and simplify stock replenishment in larger toolrooms or distribution hubs. Choose the Vertex 5C-22 for dependable precision and contact Metav Werkzeuge in Emmerich for expert advice and reliable supply. Technical data Article number: 5C-22 GTIN: 4061905090127 eClass: 21041712 Manufacturer: Vertex Facts Nominal diameter: 22 mm Runout accuracy: 0.02 mm Length: 87 mm Weight: 0.21 kg Special features Standard 5C collet interface Compact design for improved access Traceable SKU for inventory management FAQ What level of concentricity can be expected from this collet? The Vertex 5C-22 collet is specified with a 0.02 mm runout accuracy, providing reliable concentricity for precision machining tasks. Is the 5C-22 compatible with standard 5C chucks and spindles? Yes, the item uses the standard 5C interface, ensuring compatibility with common 5C chucks and toolholders used in workshops and production. How is the product identified for ordering and inventory? This collet is listed as SKU 5C-22 and can be ordered using GTIN 4061905090127 to guarantee correct supply and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
22mm Clamp Bar Nr. 6314V Height 19-105mm M20 Thread With M20x22x200 Clamping Screw - AMF
Take advantage of a compact, adaptable clamping solution with a 22 mm T‑slot interface, an adjustable clamping height of 19–105 mm and a robust M20 thread for standard clamping screws; order directly via Metav Werkzeuge or consult our specialists for integration advice. Spanneisen Nr. 6314V – Clamping arm for 22 mm T‑slot, H 19–105 mm (AMF) A Spanneisen Nr. 6314V provides versatile clamping for workshop and production fixturing, designed to engage 22 mm T‑slots and accept standard M20 clamping screws. For 22 mm T‑slot tables Adjustable clamping height 19–105 mm Thread M20 for standard clamping screws Compact 160 mm overall length Secure, adaptable clamping that speeds up setup times The clamping arm is configured for direct integration with machines and fixtures that use a 22 mm T‑slot, allowing quick attachment and repeatable positioning. The broad clamping height 19–105 mm range enables handling of varied workpiece sizes without multiple intermediate components, which reduces setup changes and minimises downtime. This adaptability supports lean workflows and helps maintain consistent clamping pressure across production runs. Standardised thread for reliable force transmission Equipped to accept an M20 thread, the component pairs with common clamping screws such as M20 x 22 x 200, delivering secure and predictable holding force for machining and assembly operations. Using established thread standards simplifies maintenance and replacement, so clamp assemblies remain serviceable with off‑the‑shelf fasteners. The standardised interface therefore contributes directly to operational reliability and easier spare‑part management. Compact footprint and clear dimensional data for easy planning With a 160 mm overall length and 22 mm width, the clamping arm fits into tight fixture layouts while providing a stable lever for clamping actions. The concise dimensional profile supports efficient nesting on modular fixturing plate systems and helps planners calculate clearances quickly. Clear numeric specifications make the component straightforward to include in CAD layouts or BOMs, reducing ambiguity during procurement and installation. For dependable clamping in standard T‑slot setups, request the AMF clamping arm Nr. 6314V via Metav Werkzeuge — our consultants at Metav Werkzeuge will advise on compatibility and order fulfilment to ensure rapid integration into existing jig and fixture systems Technical data Article number: 4000603038NW Type: Nr. 6314V Product type: Clamping arm Manufacturer: AMF Packing unit: 1 Key measurements Clamping height: 19–105 mm T‑slot: 22 mm Width: 22 mm Overall length: 160 mm Thread: M20 Special features Compatible clamping screw: M20 x 22 x 200 Additional dimensions: A: 30; B2: 60; E1: 30; E2: 60; LS: 109 FAQ What T‑slot size is this clamping arm designed for? This clamping arm is designed for a 22 mm T‑slot and is supplied as the Spanneisen Nr. 6314V (AMF, SKU 4000603038NW) for direct mounting in standard 22 mm table slots. What is the clamping height range and why does it matter? The clamping height range is 19–105 mm; this range allows the Spanneisen Nr. 6314V to secure a wide variety of workpiece heights without additional spacers, improving fixture flexibility. Which clamping screw fits the assembly? The assembly is compatible with an M20 x 22 x 200 clamping screw as indicated in the component data; using this standard fastener ensures correct engagement with the M20 thread. Can this clamping arm be used in modular jig systems and CNC fixtures? Yes, the compact design and standard interfaces make the Spanneisen Nr. 6314V suitable for modular jig systems and CNC fixtures where a 22 mm T‑slot and M20 clamping are employed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm ER Collet Precision Clamping, 5 µm Runout Accuracy, L46mm - TECWERK
Achieve dependable toolholding with 5 µm runout and full clamping length support; the 22 mm TECWERK ER collet meets DIN 6499-B and bridges up to nominal minus 1.0 mm — order the collet directly via Metav Werkzeuge or ask our consultants for application advice. TECWERK ER collet Type ER 40/472 E — 22 mm clamping diameter The TECWERK ER collet Type ER 40/472 E is a precision ER collet engineered for secure, repeatable toolholding in machining centres and ER collet chucks. Conforms to DIN 6499-B 5 µm runout and repeatability Holds tools along full clamping length 22 mm nominal clamping diameter Maximise machining accuracy through consistent holding The TECWERK ER collet is designed for precision toolholding where repeatability matters. Its adherence to DIN 6499-B guarantees dimensional compatibility with standard ER collet systems, while the specified 5 µm runout and repeatability minimise part deviation and tool vibration during cutting. For production runs and setups where tolerances are tight, the combination of standard conformity and low runout translates into fewer rejected parts and longer tool life, supporting reliable throughput on milling and machining applications. Faster set-ups and secure grip reduce machining interruptions Clamping is simplified by the ability to grip tools along the full clamping length, enabling stable contact and reducing axial and radial play. The collet permits clamping on the guiding chamfer and covers intermediate sizes by a bridging nominal minus 1.0 mm, lowering the need for multiple intermediate collet sizes and accelerating changeovers. These characteristics shorten preparation time and reduce inventory complexity, which benefits workshop efficiency and keeps production moving with fewer interruptions. Built for compatibility and clear specification in the workshop Specified dimensions and measurable data make integration straightforward: the collet delivers a compact footprint while providing defined performance. Key dimensional values such as L: 46 mm and D: 41 mm support correct selection for existing chucks and toolholders, and the nominal 22 mm clamping diameter is suitable for a broad range of tooling. The simple, standard-based design ensures the ER collet is a practical choice for both maintenance of existing equipment and upgrade paths in small to medium production environments. For dependable clamping performance with TECWERK ER collets, contact Metav Werkzeuge for tailored advice and qualification at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultation and supply coordination available from our Emmerich centre Technical Data Article number: 2000832986NW Manufacturer: TECWERK Product type: ER collet Packaging unit: 1 Facts Clamping diameter: 22 mm Length L: 46 mm Diameter D: 41 mm Runout / repeatability: 5 µm Clamping-bridge: nominal minus 1.0 mm Special features Conforms to DIN 6499-B Holds tools along full clamping length Can be clamped on the guiding chamfer Suitable for ER collet chucks FAQ What clamping range does the collet cover? The TECWERK ER collet provides a nominal clamping diameter of 22 mm and bridges down to nominal minus 1.0 mm, enabling secure clamping across intermediate tool sizes. How precise is the toolholding? Runout and repeatability are specified at 5 µm for the TECWERK ER collet Type ER 40/472 E (SKU 2000832986NW), supporting consistent machining accuracy. Can the collet be clamped on the chamfer? Yes, the design allows clamping on the guiding chamfer, which assists in stable axial positioning and secure gripping along the full clamping length. Which standards and chuck types is it compatible with? The collet conforms to DIN 6499-B and is intended for use with standard ER collet chucks and holders in machining centres and similar toolholding systems. What are the key dimensions for installation planning? Relevant dimensions include a clamping diameter of 22 mm, length L: 46 mm and outer diameter D: 41 mm, which facilitate compatibility checks with existing toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
22mm Flange According to DIN 6331 M10x1.5mm Thread Height 15mm - Vertex
A compact flange manufactured to DIN 6331 with a 22 mm diameter bore and an M10 x 1.5 mm thread provides standardised interfacing and a secure, low-mass attachment point for fixtures and tooling; order the flange directly via Metav Werkzeuge or consult the advisors if integration guidance is required. Flange CFN1017 — DIN 6331 flange, Ø 22 mm with M10 x 1.5 mm thread (Vertex) The Flange CFN1017 is a DIN 6331 compliant flange intended for precise positioning and secure mounting in assembly, tooling and fixturing contexts. DIN 6331 standard compliance 22 mm diameter precision bore M10 x 1.5 mm threaded connection Lightweight 0.02 kg for minimal load Consistent positioning with a standardised interface Manufactured to DIN 6331, this flange offers a standardised interface that simplifies machine and fixture compatibility. The standard ensures repeatable alignment and interchangeability across assemblies, reducing set-up times and minimising the risk of misalignment during production runs. By relying on an established norm, maintenance and replacement become straightforward, supporting predictable production planning and spare-part logistics. Reduced inertia for smoother handling and less wear With a nominal mass of 0.02 kg and a compact profile (height 15 mm), the component adds almost no rotational inertia to assemblies. This low mass supports improved dynamic behaviour where balancing and rapid accelerations matter, such as in small rotary fixtures or precision positioning stages. The lightweight nature also contributes to reduced bearing loads and can extend the service life of connected moving elements without compromising rigidity. Secure metric fastening for versatile mounting The integrated M10 x 1.5 mm thread provides a conventional metric connection that mates with commonly used fasteners and clamping elements. This compatibility with standard hardware streamlines assembly and allows for straightforward retrofitting into existing setups. The metric thread pitch and form support reliable axial clamping force, ensuring that the flange remains fixed under operational loads and vibrations typical in workshop and light industrial environments. Practical fit for workshop and small-series production The 22 mm bore and compact dimensions make the flange well suited to tooling, jigs and small modular fixtures where space is at a premium but positional accuracy is required. Its standard interface reduces engineering overhead when designing attachment points, while the modest footprint aids flexible placement within constrained assemblies. For procurement and warehousing, the clear specification and SKU simplify inventory handling and traceability across production batches. For expert advice on application and to request this Vertex flange via Metav Werkzeuge, contact the Metav team by e‑mail at info@metav-werkzeuge.com, by phone on +49 2822 7131930 or via WhatsApp at +49 170 2837271 — the Metav specialists will confirm suitability and ordering options Technical data SKU: CFN1017 GTIN: 4061905093685 Standard: DIN 6331 Manufacturer: Vertex Core specifications Diameter: 22 mm Height: 15 mm Weight: 0.02 kg Thread: M10 x 1.5 mm Special features Standardised flange interface (DIN 6331) Compact, low-mass design Metric M10 x 1.5 thread for common fasteners FAQ What standard does the flange follow? The Flange CFN1017 is manufactured to DIN 6331, ensuring a standardised interface and interchangeability. What are the main dimensions of this flange? The Flange CFN1017 has a 22 mm diameter bore, a height of 15 mm and a weight of 0.02 kg; it features an M10 x 1.5 mm thread. Can this flange be fastened with standard metric fasteners? Yes — the M10 x 1.5 mm thread of the Flange CFN1017 is compatible with common M10 metric fasteners for secure mounting. Which identifiers should be used when ordering or checking stock? Use the SKU CFN1017 and GTIN 4061905093685 when identifying the Vertex flange for procurement or inventory purposes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
22mm Nutenstein No. 6322B 18mm Slot Width For M6 x 16 Fastening - AMF
Robust fixing for 18 mm T-slots and compatibility with M6 x 16 fasteners deliver secure clamping with minimal profile height; the compact 10 mm section reduces interference in confined assemblies. Order the AMF Nr. 6322B directly via Metav Werkzeuge or consult our specialists for application advice. Nr. 6322B T-slot nut — 18 mm nominal slot, for M6 x 16 fasteners (AMF) The Nr. 6322B T-slot nut is a compact fastening element intended for machines, fixtures and worktables with an 18 mm T-slot, optimised for fixed mounting and standard metric fasteners. Fits 18 mm T-slots Compatible with M6 x 16 fasteners Compact 10 mm profile height Designed for fixed mounting Secure clamping for standard 18 mm tables The component provides a dependable clamping point in 18 mm T-slots, ensuring repeatable positioning of fixtures and workpieces. Its compatibility with M6 x 16 fasteners allows the use of common metric screws for straightforward assembly. As a result, the element reduces lateral play and secures loads without the need for bespoke fasteners, enabling consistent machine set-ups and predictable clamping performance. Low profile that minimises interference With a 10 mm profile height and a total length of 22 mm, the fastening element keeps the clamped area compact and unobtrusive. The reduced height is beneficial where tool paths or adjacent components require clearance, and the compact length aids in installations where space along the slot is limited. These dimensional characteristics help maintain accessibility while providing the required clamping force. Simple integration into fixed mounting assemblies Designed for fixed mounting, the unit suits permanent or semi-permanent fixture arrangements on production jigs and tooling plates. Its standardised geometry for an 18 mm nominal slot simplifies inventory and replacement planning across multiple workstations. The compatibility with standard metric screws shortens assembly time and supports consistent torque settings during installation, which in turn contributes to repeatable clamping quality. Suitable choice for workshop and industrial applications Manufactured by AMF, this T-slot nut is a practical option for workshops and production environments seeking a reliable, compact fastening solution. Supplied as a single unit per packaging, the component supports targeted replacements and small-batch fitting tasks. The straightforward design focuses on function and compatibility, making it a pragmatic choice where proven standard parts are preferred over customised solutions. For secure, standardised T-slot fixation with an 18 mm nominal slot, request the AMF Nr. 6322B via Metav Werkzeuge in Emmerich for specification checks and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 4000833229NW Type: Nr. 6322B Manufacturer: AMF Product type: T-slot nut UID: 4000833229NW Dimensions Height: 10 mm Total length: 22 mm Nominal slot width: 18 mm Compatible fastener: M6 x 16 Special features Packaging unit: 1 Fixed mounting variant Label: T-slot nut Nr. 6322B — nominal slot 18 mm — fixed mounting — AMF FAQ What slot size is this T-slot nut designed for? The T-slot nut is sized for an 18 mm nominal slot width, providing a standard fit for 18 mm T-slots. Which screw size fits this nut? The component accepts M6 x 16 fasteners, allowing the use of standard M6 screws with a 16 mm length. What are the key dimensions of the fastening element? Key measurements are a 10 mm profile height and a total length of 22 mm, offering a compact footprint. Is this item suitable for permanent fixture mounting? Yes; the design is for fixed mounting, intended where a secure, lasting clamping point is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Quick-Change Insert SES Size 3 for DIN 374/376 M30, 18mm Square, Adjustable Torque Safety Clutch - TECWERK
Take advantage of the combination of an adjustable safety coupling, robust torque transmission via an 18 mm shaft square, and a compact design that reduces tap breakage and downtime; order the insert directly via Metav Werkzeuge or consult our specialists for matching inserts and shank sizes. Quick-change insert SES 22 mm × 18 mm, Size 3 — TECWERK for DIN 374/376 M30 with adjustable safety coupling The Quick-change insert SES 22 mm × 18 mm, Size 3 is a compact adapter designed for safe torque-limited threading operations with taps conforming to DIN 374/376 M30. Adjustable safety coupling for torque limitation Prevents thread tap breakage during operation Torque transmitted via 18 mm shaft square Consistent torque control to protect tooling and processes The adjustable safety coupling provides a precise torque limit mechanism so that the tap slips before catastrophic failure occurs. This torque-limiting function reduces tool replacement frequency and minimises unscheduled machine downtime, which translates into measurable savings in cycle time and maintenance. In practice, a correctly set coupling prevents sudden overloads on the tap, preserving thread quality and extending component service life while maintaining production rhythm. Reliable transmission via the square shank for clean torque transfer Torque is transmitted through the shaft square, ensuring a positive drive and minimising torsional play during threading. The combination of a 22 mm body diameter with an 18 mm square provides a stable connection suitable for standard tapping fixtures. This means consistent cutting conditions and reproducible results in both single-station and multi-spindle setups. The secure mechanical interface supports higher process reliability and reduces the risk of misalignment-related tool wear. Designed for compatibility with DIN 374/376 M30 and modular workflows Compatibility with DIN 374/376 M30 makes the unit suitable for many industrial tapping applications. Different shank sizes require corresponding inserts, allowing workshops to assemble a modular set tailored to the machine and tap shank used. The modular approach streamlines tool change routines and reduces inventory complexity: one coupling type serves several tap families when paired with the appropriate insert, improving operational flexibility. Compact dimensions for straightforward integration into existing tool chains The compact overall dimensions and clear specification of critical lengths facilitate installation and space planning in toolholders and tapping heads. Key dimensions such as L3: 41 mm, L4: 55.5 mm and D: 72 mm define the envelope required for mounting and ensure compatibility with common tapping units. Clear dimensional data aids engineers when designing fixtures or selecting spindles, reducing trial fits and accelerating setup times on the shop floor. Discuss the TECWERK Quick-change insert SES 22 mm × 18 mm Size 3 with Metav Werkzeuge for tailored advice and fast delivery from our Emmerich stock, ensuring the correct insert selection for each shank size and tapping requirement Technical data Article number: 4000832691NW Product type: Quick-change insert SES Size: Size 3 Brand: TECWERK Suitable for: DIN 374/376 M30 Packaging unit: 1 SKU/UID: 4000832691NW Core measurements Diameter (D): 72 mm Diameter (D1): 48 mm L1: 45.2 mm L3: 41 mm L4: 55.5 mm L5: 45 mm Shank square: 18 mm Body diameter: 22 mm Special features Adjustable safety coupling for torque limitation Prevents thread tap breakage Torque transmission via shaft square Requires specific inserts for different shank sizes Compact, workshop-friendly geometry FAQ What is the primary purpose of this quick-change insert? The TECWERK quick-change insert is designed to limit torque during tapping operations and thereby protect taps from breakage while ensuring consistent thread quality. Which tap standards is the insert compatible with? The insert is suitable for taps conforming to DIN 374/376 M30 and is intended for use where that thread interface is specified. How does the adjustable safety coupling improve production reliability? By setting a defined torque threshold, the coupling slips before the tap is overloaded, reducing unexpected tool failure and improving overall machine uptime. Are different shank sizes supported with the same coupling? Yes, the coupling transmits torque via the shaft square, and different inserts are required for different shank measurements to ensure a secure fit. What are the key dimensions to verify before installation? Refer to the core measurements such as D, D1, L1, L3, L4, L5 and the shank square (18 mm) to confirm compatibility with the intended toolholder and tapping head. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
22mm Slot Nut Nr. 6322A For Fixed Mounting, Fits M6 x 16 - AMF
Take advantage of a precise fit for mixed machine and fixture T-slots combined with a fixed‑mount design and compatibility with standard M6 x 16 fastenings for reliable clamping performance; order directly via Metav Werkzeuge or consult our technical team for application advice. Nr. 6322A T-slot nut (nominal slot 22/20 mm) by AMF The Nr. 6322A T-slot nut is a fixed‑mount fastening component for 22 mm machine and 20 mm fixture T‑slots, designed to accept M6 x 16 screw connections for secure clamping in workshop and production environments Precision fit for 22/20 mm T-slots Designed for fixed mounting Suitable for M6 x 16 fastening Robust AMF component quality Precise compatibility that shortens set‑up time The combination of nominal slot dimensions 22/20 mm and a finish intended for fixed mounting ensures a repeatable seating position in machine tables and dedicated fixtures, which reduces alignment effort during assembly and tool changes. A defined interface for M6 x 16 fastenings simplifies parts selection and inventory management, meaning less time is spent checking screw dimensions and more on productive machining. In practice, the precise fit results in improved clamping consistency and reduced rework. Secure fixed mounting for vibration‑resistant clamping The fixed‑mount configuration delivers a stable connection between workholding elements and the machine or jig, lowering the risk of micro‑movement under cutting loads. This stability supports process reliability and helps preserve dimensional tolerances across production batches. With a component designed specifically for fixed installation, maintenance cycles are more predictable and fixture life is extended through reliable force distribution during clamping operations. Clear integration into existing workshop systems Specified for standard T‑slot sizes and M6 screw engagement, the component integrates easily into conventional machine tables and tooling plates, allowing rapid retrofitting or new fixture design without specialist adapters. Technical teams benefit from the straightforward specification: nominal slot widths and screw compatibility are defined, simplifying drawings and procurement lists. For workshops seeking reproducible clamping results, this T‑slot nut supports consistent setup procedures and reduces assembly complexity. For tailored technical advice or to procure AMF fastening components, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav’s consultants will advise on compatibility and availability Technical data Article number: 4000833238NW Type: Nr. 6322A Product type: T-slot nut Manufacturer: AMF Packaging unit: 1 Facts Nominal slot (machine): 22 mm Nominal slot (fixture): 20 mm Suitable for screw: M6 x 16 HL: 2 mm Special features Fixed mounting design Precision fit for 22/20 mm T-slots AMF component label and SKU 4000833238NW FAQ What slot widths does this T‑slot nut fit? The T‑slot nut is specified for a 22 mm nominal machine slot and a 20 mm nominal fixture slot, providing a defined seating for mixed‑use setups. Which screw size is recommended for mounting? The component is designed to accept M6 x 16 screws for secure fixed mounting in compatible T‑slots. Is this item suitable for regular machine table retrofits? Yes, the nut’s specification and fixed‑mount design allow straightforward integration into standard machine tables and workshop fixtures. Does the product offer vibration resistance during heavy cutting? The fixed‑mount configuration and precision fit of the AMF T‑slot nut reduce micro‑movement and contribute to stable clamping under cutting loads. How is the item delivered and what is the packaging unit? The item is supplied with a packaging unit of 1 and is listed under SKU 4000833238NW for order reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Slot Nut Nr.6322B For 20mm Slot, Height 10mm, For M6 x 16 Fastening - AMF
Take advantage of the combination of compact dimensions, secure fastening and straightforward installation to keep assembly processes efficient and reliable; order the item via Metav Werkzeuge or consult Metav's specialists for compatibility advice. AMF T-slot nut Nr. 6322B — for 20 mm slot, compatible with M6 x 16 The AMF T-slot nut Nr. 6322B is a purpose-built T-slot nut for modular fixture systems, intended for fixed mounting in profiles with a nominal 20 mm groove and compatible with standard M6 x 16 fasteners T-slot nut for 20 mm slot Compatible with M6 x 16 fasteners Compact dimensions: 22 mm length, 10 mm height Flat design for fixed mounting Secure, standardised clamping for profile systems The AMF component provides a reliable connection between fixtures and standard aluminium profiles. Designed for a 20 mm slot, this T-slot nut accepts common M6 threads and therefore simplifies part selection across a wide range of modular assemblies. The design translates technical compatibility into practical benefits: reduced downtimes when changing setups, fewer special parts to manage and predictable mechanical behaviour under clamping loads. Where installation speed and repeatability matter, the combination of slot compatibility and standard fastener size supports efficient assembly lines and jigs. Compact shape reduces interference and eases installation With an overall length of 22 mm and a height of 10 mm, the nut occupies minimal profile space while delivering a secure anchoring point. The flat design for fixed mounting prevents rotation during tightening and ensures a stable seating surface, which lowers the risk of misalignment in narrow assemblies. For engineers and workshop planners this means simpler mounting procedures, fewer alignment iterations and cleaner component layouts on workbenches or machine tables. Clear, compact dimensions also assist with CAD planning and automatic parts lists for production runs. Simplified inventory and dependable supply for workshops Standardised parts such as this T-slot nut reduce SKU complexity and support lean stocking strategies. Supplied in single units, the component is easy to sample and integrate into prototypes or small batches before scaling procurement. The SKU 4000833230NW and type Nr. 6322B make traceability straightforward in procurement systems and maintenance lists. Backing from an established distributor ensures continuity of supply and a quality filter at the logistics hub in Emmerich, which supports reliable restocking and consistent part quality for workshops and production facilities. Secure a reliable stock of AMF T-slot nut Nr. 6322B through Metav Werkzeuge for consistent assembly performance; contact Metav Werkzeuge for technical clarifications at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833230NW Type: Nr. 6322B Manufacturer: AMF Product type: T-slot nut Label: Nutenstein Nr.6322B Nennmaß der Nut 20mm fl.z.Festmontage AMF Dimensions Overall length: 22 mm Height: 10 mm Suitable for: M6 x 16 Special features Addition: B: 20 Flat design for fixed mounting Packaging unit: 1 FAQ What slot width is this nut intended for? The nut is intended for a nominal 20 mm slot, as indicated by the product label and the Addition B: 20 specification for the AMF T-slot nut Nr. 6322B (SKU 4000833230NW). Which fastener size fits this T-slot nut? This T-slot nut is compatible with M6 x 16 fasteners, providing a standardised connection for common assembly tasks. What are the overall dimensions of the part? The component measures 22 mm in length and 10 mm in height, dimensions that support compact installations and convenient CAD planning. Is the nut suitable for fixed mounting? Yes — the design includes a flat side for fixed mounting, which reduces rotation during tightening and improves seating stability in profile grooves. How is the part supplied for initial testing or small production runs? The nut is supplied per the packaging unit of 1, allowing easy sampling and incremental stocking of the AMF T-slot nut Nr. 6322B. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm T-Slot Bolt M20 L125mm Grade 8.8 With Nut And Washer, DIN 787 - AMF
Take advantage of a DIN 787‑compliant design combined with an M20 thread and 125 mm overall length for robust, repeatable clamping in T‑slot applications; the fastener’s strength class 8.8 and delivery with nut and washer ensure reliable assembly and reduced procurement steps. Order the AMF T‑slot screw directly via Metav Werkzeuge or consult our specialists for specification support. AMF T‑slot screw DIN 787 – 22 mm T‑slot, M20 x 125 mm, grade 8.8 A T‑slot screw designed for secure fixturing in 22 mm T‑slots, offering standardised dimensions and industrial strength for machine tables and clamping systems. DIN 787 standardised dimensions M20 thread for high clamping force 125 mm overall length for deep fixtures Includes nut and washer for direct use Reliable performance for production clamping The fastener conforms to DIN 787, which defines the geometry and fit for T‑slot bolts used in machine tables and fixtures. The M20 thread combined with a 125 mm overall length provides a high clamping leverage and makes tightening procedures predictable under service conditions. Specified as strength class 8.8, the component offers a balance of tensile strength and toughness suitable for routine industrial use, reducing downtime caused by fastener failure and ensuring consistent part alignment during machining or assembly processes. Compact handling and immediate fitment benefits Supplied complete with nut and washer, the assembly is ready for immediate installation, eliminating the need to source hardware separately and speeding up fixture changes. The 22 mm head profile is matched to standard T‑slot widths for a secure, anti‑rotation fit, which improves repeatability in production set‑ups. Where quick changeovers are required, the standardised form factor simplifies inventory management and reduces time spent on assembly preparation. Robust choice for workshops and production lines Chosen for its standardized geometry and proven strength class, this T‑slot fastener supports reliable clamping across a wide range of applications from toolroom jigs to shop‑floor fixtures. The combination of DIN compliance, thread size and included fastening elements contributes to a predictable service life and lower overall maintenance effort. For buyers seeking an efficient supply route, the item aligns with Metav’s emphasis on accessible precision and dependable delivery. For procurement or technical selection of AMF T‑slot screws, contact Metav Werkzeuge for tailored advice and reliable supply coordination via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4000833352NW SKU / UID: 4000833352NW Standard: DIN 787 Brand: AMF Facts Thread: M20 T‑slot compatibility: 22 mm Overall length: 125 mm Packaging unit: 1 Special features Strength class: 8.8 Delivered with nut and washer Product type: T‑slot screw Axial enrichments: A: 21.7; B: 85; E: 35; K: 14 FAQ What T‑slot width does this fastener fit? This T‑slot screw is designed for a 22 mm T‑slot and matches the standard head geometry specified under DIN 787. Does the delivery include fastening hardware? Yes, the AMF T‑slot screw is supplied with nut and washer, ready for immediate assembly. What do DIN 787 dimensions guarantee? DIN 787 ensures standardised head and shank geometry for T‑slot bolts, so the fastener will fit correctly into machine tables and clamping rails compliant with the same standard. Which thread and length are specified for this fastener? The component uses an M20 thread and an overall length of 125 mm, suitable for deeper fixture requirements. How is the item packaged? The product is supplied in a packaging unit of 1. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm T-Slot Nut M16 DIN 508, Strength Class 10 - AMF
Take advantage of the precise fit and high clamping capacity offered by this component: compatibility with DIN 508, a 22 mm T-slot profile and an M16 threaded core ensure reliable fixture retention; the strength class 10 rating adds durability for demanding clamping operations. Order the component directly via Metav Werkzeuge or contact our consultants for application advice. T-slot nut (DIN 508) — 22 mm, M16 | AMF A T-slot nut (DIN 508) for secure fixture mounting in 22 mm table slots, designed for heavy-duty clamping and standardised machine tool tables DIN 508 standard compliant For 22 mm T-slots M16 threaded fastening Strength class 10 for heavy clamping Accurate seating for standard machine tables The T-slot insert is manufactured to meet DIN 508, guaranteeing a consistent and predictable fit in standard 22 mm T-slots. With an overall height of 28 mm and axial dimensions A 21.7 mm, E 35 mm and K 14 mm, the component provides a defined seating surface that reduces lateral play and improves repeatability when mounting clamps or fixtures. This compatibility with common slot geometries simplifies fixture planning and reduces setup time on the shop floor. Robust fastening for demanding clamping tasks Featuring an M16 internal thread and rated strength class 10, the part is engineered for high clamping loads where secure retention is critical. The tensile performance implied by the strength class supports heavy-duty applications while preserving joint integrity during machining cycles. Specifying a high-strength T-slot fastener like this helps maintain consistent clamping force over repeated use, lowering the risk of slippage and the need for frequent retorquing. Straightforward integration and stock-ready supply Designed as a direct replacement or upgrade for factory-standard T-slot hardware, the item integrates seamlessly into existing workholding systems and modular fixtures. Supplied singly (packing unit: 1) and clearly identified by SKU 4000603169NW, the component from AMF simplifies inventory management for workshops and production lines. The standardised geometry and thread size make procurement and stocking predictable, supporting efficient order cycles and faster assembly on the production bench. Contact Metav Werkzeuge for application guidance or to reserve AMF T-slot nuts (SKU 4000603169NW); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603169NW UID: 4000603169NW Manufacturer: AMF Product type: T-slot nut Standard: DIN 508 Facts Height: 28 mm T-slot width: 22 mm Thread: M16 Axial dimensions: A 21.7 mm, E 35 mm, K 14 mm Strength class: 10 Packing unit: 1 Special features Factory standard: DIN 508 Suitable for securing fixtures and workholding in machine tables Single-piece supply for predictable stocking FAQ What slot width does this T-slot nut fit? The T-slot nut is designed for 22 mm T-slots as specified under DIN 508, ensuring correct seating in standard table profiles. Which thread size is provided? This component is supplied with an M16 internal thread for direct connection to M16 bolts and clamping elements. What are the key axial dimensions to check for compatibility? Check the axial dimensions A 21.7 mm, E 35 mm and K 14 mm to confirm fit and seating on the table slot, as these determine how the nut engages the slot profile. How does the strength class affect application? The strength class 10 rating indicates high mechanical capability suitable for demanding clamping operations, providing robust retention under load. Is the item supplied individually or in sets? The part is supplied as a single unit (packing unit: 1) and is listed under SKU 4000603169NW for straightforward ordering and inventory control. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm T-Slot Nut M20 High Strength Class 10, DIN 508 - AMF
Robust clamping performance and standard compliance make this component a dependable choice for fixture work: 22 mm T-slot compatibility, M20 thread and strength class 10 deliver high clamping forces and long service life. Order the T-nut directly via Metav Werkzeuge or consult the technical team for integration advice. T-Nut DIN 508 T-Nut 22mm M20 AMF — M20 thread for 22 mm T-slots A T-Nut DIN 508 T-Nut 22mm M20 AMF designed for secure clamping in 22 mm T-slots on machine tables, clamping plates and fixturing systems. DIN 508 compliant T-nut M20 metric thread for high clamping force Compatible with 22 mm T-slots Strength class 10 for increased durability High clamping force for demanding fixtures The design offers a compact profile with a M20 internal thread and a strength class 10, enabling reliable torque transmission for heavy clamping tasks. The combination of thread size and hardness class ensures the component withstands repeated tightening cycles without significant deformation, which supports consistent assembly quality in production environments. This makes the element suitable where firm, vibration-resistant fixing is required in milling tables and modular fixture systems. Precise dimensions for predictable assembly Manufactured to DIN 508, the T-nut provides reproducible geometry for automated positioning and manual assembly alike. Key dimensions — 22 mm T-slot compatibility, height 28 mm and sectional measures A 21.7 mm / E 35 mm / K 14 mm — enable planners and machinists to verify fitment quickly and avoid iterative adjustments. Clear dimensional data supports CAD integration and reduces setup time on jigs or machine tables, improving throughput in batch production. Reliable standard conformity and workshop fit Compliance with the recognised standard assures compatibility across suppliers and fixture systems, reducing the risk of mismatched components. The part is suited for industrial clamping applications and retrofit operations where standardised, interchangeable parts are required. Traceable identification via the SKU and documented measurements simplifies procurement and inventory management for maintenance departments and toolrooms. For firm, standard-compliant clamping choose the AMF T-nut: contact Metav Werkzeuge for availability, technical clarification and ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833210NW Product type: T-Nut Brand: AMF Standard: DIN 508 Facts T-slot width: 22 mm Height: 28 mm Thread: M20 Dimensions A: 21.7 mm; E: 35 mm; K: 14 mm Strength class: 10 Packaging unit: 1 Special features DIN 508 compliant Metric thread M20 For 22 mm T-slot systems Compact, robust design FAQ What T-slot width does this T-nut fit? The T-nut fits a 22 mm T-slot and is specified for standard 22 mm machine table grooves. Which thread size is provided with the T-nut? The component has an internal M20 metric thread designed for high clamping loads. Is this part compliant with industry standards? Yes, the T-nut is manufactured to DIN 508, ensuring compatibility with standard fixturing systems. What are the key dimensions relevant for installation? Relevant measures include height 28 mm and sectional dimensions A 21.7 mm, E 35 mm, K 14 mm, which facilitate fitting and CAD verification. How does strength class 10 affect usage? Strength class 10 indicates higher tensile and yield properties, supporting repeated tightening and demanding clamping applications with improved resistance to wear and deformation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm T-Slot Nut M20 Rhombic High Strength Class 10, Height 28mm - AMF
Take advantage of high compatibility and proven strength: the 22 mm T-slot and M20 thread combine with a rhombic profile and strength class 10 to deliver a secure clamping solution that integrates with standard aluminium profiles; order directly via Metav Werkzeuge or request technical advice from the Metav team. T-slot Nut No. 510 — 22 mm T-slot, M20 thread, rhombic profile by AMF T-slot Nut No. 510 is a rhombic-profile T-slot nut engineered for secure fastening in 22 mm T-slots, featuring an M20 metric thread for robust connections. 22 mm T-slot compatibility M20 metric thread for heavy-duty fixings Rhombic profile for positive clamping Strength class 10 rated construction Proven compatibility with standard 22 mm profiles for reliable assembly The design focuses on straightforward integration: the 22 mm T-slot width matches common aluminium profile systems, while the M20 thread provides a widely used metric interface for bolts and studs. The rhombic cross-section converts tightening torque into a positive mechanical grip, reducing the risk of rotation under load. These characteristics make the component suitable for machine frames, workholding systems and modular fixtures where standardised interface dimensions contribute to faster assembly and fewer errors. The result is a repeatable connection that supports efficient production workflows. Clear dimensioning for predictable clamping behaviour With measured additions of A 21.7 mm, E 35 mm and K 14 mm, the part offers defined contact surfaces that simplify layout and ensure predictable clamping geometry. The specification also notes a strength class 10, indicating elevated material performance for demanding applications where higher tensile resistance is required. Such numeric values enable planners to verify fit and safety margins during design reviews and to select suitable mating fasteners with confidence. Where tolerance stacks are critical, these dimensions provide a verifiable basis for CAD modelling and procurement documentation. Operational benefits and supply reliability from a trusted partner Beyond mechanical performance, the component supports lean assembly practices: standardisation on a T-slot width and a metric thread reduces inventory complexity and speeds up maintenance interventions. Sourcing through an established supplier brings additional assurance: Metav Werkzeuge combines a broad portfolio with logistical reliability, backed by a large customer base and central European distribution. That supply chain transparency helps avoid production downtime and keeps workstations supplied with compatible fastening elements for rapid assembly or retrofit tasks. Contact Metav Werkzeuge for tailored advice on the AMF T-slot Nut No. 510 (SKU 4000833222NW) and to arrange immediate supply or technical clarification from Emmerich’s specialist team Technical Data Article number: 4000833222NW Type: No. 510 Label: T-slot nut No. 510 T-slot 22mm M20 rhombic AMF Facts Height: 28 mm T-slot width: 22 mm Thread: M20 Addition: A: 21.7 mm; E: 35 mm; K: 14 mm; Strength class: 10 Packaging unit: 1 Special features Rhombic profile Metric M20 thread Suitable for 22 mm T-slots Manufacturer: AMF FAQ Is this T-slot nut compatible with standard 22 mm aluminium profiles? Yes. The AMF T-slot Nut No. 510 (SKU 4000833222NW) is designed specifically for 22 mm T-slot profiles and mates with standard aluminium framing systems. Which thread size is used for fastening? The part features an M20 metric thread, allowing the use of common M20 bolts or studs for heavy-duty connections. What does the strength class 10 indicate for performance? Strength class 10 denotes elevated tensile and yield properties, so the T-slot nut from AMF delivers improved resistance against shear and pull-out in demanding assemblies. Are the dimensional additions provided for design verification? Yes. The values A 21.7 mm, E 35 mm and K 14 mm describe the critical contact dimensions and support precise CAD integration and tolerance checks. Can this nut be used in load-bearing fixture applications? The combination of a rhombic profile and strength class 10 makes the component suitable for many load-bearing fixtures; assessment of the complete joint and fastener selection should follow standard engineering practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm T-Slot Nut Nr. 510 M16 Rhombic, Height 28mm, Strength Class 10 - AMF
Robust rhombic T‑slot nut with an M16 internal thread and 22 mm T‑slot compatibility for reliable, repeatable clamping; strength class 10 and a 28 mm height combine to deliver high load capacity and long service life. Order directly via Metav Werkzeuge or request technical guidance from our consultants to confirm fit and installation. T-slot nut No. 510 — rhombic T‑slot element, 22 mm, M16 (AMF) The T-slot nut No. 510 is a rhombic clamping insert designed for 22 mm T‑slots, offering an M16 thread for secure fixture mounting across machine tables and modular workholding systems. Rhombic profile for positive locking Fits 22 mm T‑slot standard M16 internal thread for strong clamping Strength class 10 for high load capacity Secure, high-strength clamping for demanding fixtures The rhombic geometry delivers positive locking in the slot and, together with the M16 thread, ensures clamping reliability under dynamic loads. With a nominal height of 28 mm and defined add-on dimensions A 21.7 mm, E 35 mm and K 14 mm, the component provides predictable bearing surfaces and repeatable positioning. These measurable values translate into reduced setup variation and consistent force transmission, which helps to lower fixture rework rates and improve process stability in production environments. Fast integration with standard machine tables and tooling Compatibility with the 22 mm T‑slot standard simplifies retrofits and new builds: the element slots into common machine and fixture rails without the need for adapters. The compact form factor and internal thread arrangement enable straightforward installation using standard fastening hardware, shortening downtime during changeovers. Clear, numeric data for slot width, thread size and additional dimensions allow planning departments to verify fit in CAD models and BOMs quickly, supporting efficient procurement and reduced assembly times. Industrial-grade performance backed by reliable supply Rated strength class 10, this clamping component is specified for applications where high clamping force and fatigue resistance are required. The rhombic profile and precise manufacturing tolerances contribute to long service intervals and predictable maintenance cycles. As part of Metav’s offering, sourcing from a central European distribution point means steady availability and a quality filter that supports production continuity. Technical documentation and measured values accompany deliveries to support quality assurance and traceability. Contact Metav Werkzeuge for specification checks or to confirm compatibility with existing fixtures — email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange supply and technical consultation on the T‑slot nut No. 510. Technical data Article number: 4000603185NW Type: Nr. 510 UID: 4000603185NW Manufacturer: AMF Product type: T‑slot nut Label: T‑Nutenstein Nr.510 T‑Nut 22mm M16 rhombisch AMF Dimensions & core data Height: 28 mm T‑slot width: 22 mm Thread: M16 A: 21.7 mm E: 35 mm K: 14 mm Strength class: 10 Special features Rhombic profile Designed for 22 mm T‑slots Internal M16 thread High strength class 10 Packaged per 1 unit FAQ What slot size does this nut fit? The element is specified for a 22 mm T‑slot, matching common machine table standards for modular clamping. What thread is provided in the component? An M16 internal thread is integrated to accept standard M16 bolts for strong, repeatable clamping. What does strength class 10 indicate for load capability? Strength class 10 designates the high tensile capability of the part; the T‑slot nut No. 510 is therefore suitable where elevated clamping forces and durability are required. Are additional dimensions available for installation planning? Yes — the supplementary dimensions are A 21.7 mm, E 35 mm and K 14 mm, which support precise integration and CAD verification. Can the component be supplied in larger quantities or special packs? Standard supply is per single unit; consult Metav Werkzeuge for volume orders and packaging options referencing SKU 4000603185NW. Hersteller: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22mm Thread Cutting Synchronised Chuck With Coolant Feed, 0.5mm Axial Compensation, DIN 69893 Form A - TECWERK
Benefit from the combination of HSK‑A63 compatibility, ±0.5 mm axial compensation and integrated coolant feed for reliable synchronised tapping on CNC machines; order the synchronised tapping chuck directly via Metav Werkzeuge or consult the specialists for application advice. Synchronised Thread‑Cutting Chuck HSK‑A63 – TECWERK (M3–M12, A=93 mm) The synchronised tapping chuck (DIN 69893 A) by TECWERK is a precision accessory for CNC machines with synchronised tapping spindles, designed for reliable thread cutting across small metric sizes. HSK‑A63 interface, DIN 69893 A Suitable for M3–M12 threads Internal coolant supply for chip control Axial compensation ±0.5 mm Accurate synchronization reduces rejected parts and rework The synchronised tapping chuck delivers controlled axial compensation, specified as ±0.5 mm, to absorb small pitch mismatches between the tap and the synchronised spindle. This compensation reduces stress on the tap and the spindle drive, decreasing the risk of broken taps and dropped threads. The result is fewer rejected parts, improved first‑pass yield and more predictable cycle times on high‑mix CNC production runs. Compact HSK‑A63 design improves spindle compatibility and rigidity Built to DIN 69893 A with an HSK‑A63 mounting, the chuck offers the mechanical stiffness expected from HSK interfaces while maintaining compact dimensions (A = 93 mm, outside Ø 22 mm). The short, rigid design reduces overhang and vibration, which directly contributes to high runout accuracy and consistent thread quality. For workshops upgrading to synchronised tapping, the interface simplifies retrofit and tool change procedures. Integrated coolant feed and secure clamping for process reliability An internal coolant channel enables directed lubrication and chip evacuation at the cutting zone, supporting longer tap life and cleaner thread forms. The chuck achieves high clamping force through a tensioned tap collet with an integrated square drive, ensuring secure holding for both right‑ and left‑hand threads. These features together lower maintenance frequency and support uninterrupted production cycles. Suitable thread range and operational versatility Designed for metric threads from M3 to M12, the chuck covers the small to medium sizes commonly used in component manufacturing and assembly parts. Compatibility with right and left‑hand tapping broadens application scope. The combination of precise axial compensation, coolant supply and HSK mounting makes this accessory a pragmatic choice where synchronisation errors must be mitigated without adding complex electronics or external mechanisms. Contact Metav Werkzeuge for tailored technical consultation on the TECWERK synchronised tapping chuck (SKU 2000834924NW); email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing synchronised tapping systems Technical Data Article number: 2000834924NW SKU: 2000834924NW Manufacturer: TECWERK Product type: synchronised tapping chuck Standard: DIN 69893 A Facts Outside diameter: 22 mm Length A: 93 mm Length compensation: +0.5 / -0.5 mm Thread range: M3–M12 Special features HSK‑A63 interface (DIN 69893 A) Internal coolant feed Compensates pitch differences between tap and synchron spindle Suitable for right‑ and left‑hand threads High runout accuracy High clamping force via tensioned tap collet with integrated square FAQ What spindle interface does the chuck use? The synchronised tapping chuck is supplied with an HSK‑A63 interface conforming to DIN 69893 A, ensuring direct fit to compatible CNC spindle tap adaptors. Which thread sizes are covered by this chuck? The chuck supports metric thread tapping from M3 to M12, suitable for common small and medium machine components. Can the chuck handle both right‑ and left‑hand tapping? Yes, the design permits use for both right‑hand and left‑hand threads without modification, providing flexibility in mixed production environments. How does the chuck manage pitch mismatch during synchronised tapping? Axial compensation of ±0.5 mm allows the chuck to absorb small synchronisation errors in tension and compression, protecting taps and reducing broken‑tool incidents. Is coolant supply integrated in the chuck? An internal coolant feed is provided to lubricate the tap and assist chip evacuation, contributing to longer tool life and improved thread quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com