Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
4.5 kN Pushrod Clamp Horizontal Foot, 18 mm Piston, 7.2 kN Holding Force, Zinc-Plated - Kukamet
Take advantage of the combination of strong clamping force, compact zinc‑plated construction and straightforward horizontal‑foot mounting for dependable workshop operation; order the clamp directly via Metav Werkzeuge or ask our consultants for further guidance. 521 push-rod clamp by Kukamet — 4,500 N pressing force, zinc‑plated The 521 is a compact push‑rod clamp designed for workshop and light production clamping, equipped with a horizontal foot for stable attachment and precise pressure control 4,500 N maximum pressing force 7,200 N holding force Zinc‑plated corrosion resistance Horizontal‑foot mounting for stability Consistent clamping power for repetitive tasks The clamp delivers a clear performance profile: a maximum pressing force of 4,500 N and a holding force of 7,200 N, which together provide secure retention for many standard fixturing operations. These figures indicate how much force the device applies during engagement and how much load it can reliably hold once set. For processes that require repeated, consistent clamping — for example assembly jigs or fixture workpieces in a small production run — the combination of pressing and holding force reduces slippage and rework, improving throughput and repeatability. Durable finish and compact footprint reduce downtime A zinc‑plated finish protects contact surfaces against corrosion, extending service life in workshop environments where humidity or coolant exposure can otherwise accelerate wear. The unit’s compact design and 0.825 kg mass make it simple to integrate into existing fixtures without adding unnecessary bulk or weight. The horizontal foot mounting arrangement supports low‑profile installation on plates and beams, saving vertical space while providing a stable basis for repeated clamp engagement. Simple integration and precise adjustment Adjustment is effected through the M10x70 pressure spindle, a standard metric thread and length that permits straightforward matching with common fixtures and replacement parts. The clamp uses an 18 mm piston diameter, which determines the active clamping area and the force transmission characteristics; a larger piston diameter typically yields smoother force delivery with less spindle travel. These features mean the device can be incorporated into jigs with predictable behaviour and minimal bespoke machining, lowering integration effort and easing maintenance. Practical workshop applications and efficiency gains The unit suits routine clamping tasks in workshops, on benches and in light assembly lines where reliable, repeatable holding is required. Its robust holding capacity supports secure fixturing of small to medium components, while the zinc‑plated surface reduces the need for frequent replacement. By standardising on compact, metric‑threaded clamps with known force values, process planners can simplify parts lists and speed setup times, contributing to leaner workflows and fewer stoppages due to loose workpieces. For secure, workshop‑ready clamping with Kukamet reliability, contact Metav Werkzeuge in Emmerich to discuss the 521 push‑rod clamp and its fit for specific fixtures or production tasks Technical data Article number: 521-4-Q18 GTIN: 8680731502787 Manufacturer: Kukamet Facts Max pressing force: 4,500 N Max holding force: 7,200 N Piston diameter: 18 mm Pressure spindle: M10x70 Weight: 0.825 kg ECLASS: 21041716 ETIM: EC011973 Design & special features Mounting: horizontal foot Finish: zinc‑plated Category: Spanner Image: 521-main.jpg FAQ What clamping and holding forces does this clamp offer? The Kukamet 521 push‑rod clamp provides a maximum pressing force of 4,500 N and a holding force of 7,200 N, values suited to many bench and light production fixturing tasks. How is the clamp mounted and adjusted? Mounting is via a horizontal foot; adjustment of clamping pressure is made using the M10x70 pressure spindle supplied with the unit. Is the finish resistant to workshop conditions? The zinc‑plated finish on the 521 offers corrosion resistance appropriate for typical workshop environments, helping to prolong service life under normal use. What does the piston diameter mean for performance? An 18 mm piston diameter governs the area over which clamping force is applied, affecting how force is transmitted and how smoothly the clamp operates during engagement. Which tasks is this clamp typically used for? Common applications include fixture and jig clamping in small production runs, assembly tasks and general workshop fixturing where compact, repeatable holding is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Vertical Clamp With Safety Lock, Zinc Plated, 1.54 kg - Kukamet
Take advantage of a compact clamp that combines reliable 5,000 N holding force, secure operation through a mechanical safety lock and a zinc-plated finish for long service life. Order this vertical toggle clamp directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Vertical toggle clamp 212 by Kukamet — zinc-plated with safety lock The 212 vertical toggle clamp is a compact clamping solution for vertical fixturing tasks in production, assembly and jig applications, designed for secure and repeatable workholding under frequent use. Zinc-plated for corrosion resistance Integrated safety lock for secure holding 5,000 N maximum holding force Vertical base for stable mounting Reliable clamping that keeps production moving The 212 delivers consistent clamping through a robust toggle mechanism that converts operator action into high clamping performance. With a holding force of 5,000 N and a clamping force of 4,500 N, the device secures workpieces reliably during machining, welding or assembly operations. The combination of compact dimensions and substantial force reduces rework and increases throughput, making it suitable for repetitive industrial tasks where stable fixation is essential. Fast, safe operation for busy production lines A built-in safety lock prevents accidental release under vibration or when the clamp remains under load, enhancing workplace safety and process stability. The latch engages automatically to hold the lever in position once closed, so operators benefit from a straightforward mechanical safeguard without additional components. This feature supports safer workflows and lowers the risk of damage to parts or tools, contributing to more predictable cycle times. Easy integration with existing fixtures and machines Mounting is simplified by the vertical base configuration and the standard M12×80 spindle, enabling direct attachment to benches, jigs or machine tables without complex adaptation. The zinc-plated steel construction offers a balance between durability and weight: at approx. 1.54 kg, the clamp is light enough for flexible fixture design yet robust enough for daily industrial use. Its compact form factor assists in tight layouts where space is limited. Low-maintenance build that saves operational time Surface protection and straightforward mechanics keep upkeep minimal: regular inspection and light lubrication are sufficient to maintain precise function over time. The zinc-plated finish resists corrosion in typical workshop environments, while the mechanical components are designed for long service intervals. Choosing this clamp reduces downtime for maintenance and supports continuous production with minimal intervention. For reliable, space-saving workholding choose the Kukamet 212 vertical toggle clamp — contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 212-5-L GTIN: 8680731501834 eCl@ss: 21041717 ETIM: EC011973 Facts Weight: 1.54 kg Holding force max: 5,000 N Clamping force max: 4,500 N Spindle thread: M12×80 Special features Material: zinc-plated Fastening: vertical base Safety lock SKU: 212-5-L Manufacturer: Kukamet FAQ What maximum holding force does the clamp provide? The clamp offers a maximum holding force of 5,000 N, which ensures secure fixation for general assembly and machining applications with the 212 vertical toggle clamp from Kukamet. How is the clamp mounted to a fixture or workbench? Mounting is carried out via the vertical base; the clamp includes an M12×80 spindle interface for straightforward attachment to jigs, benches or machine tables. Does the clamp include a locking mechanism for safety? Yes, the 212 features an integrated safety lock that secures the lever in the closed position to prevent accidental release under load. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5mm ER11 Collet Precision Clamping, 5 µm Runout, L 18mm - TECWERK
Take advantage of precise, repeatable clamping and full-length tool retention for reliable machining results; the collet's 5 µm runout specification and nominal clamping range of 4.5 mm ensure consistent concentricity and tool life. Order the ER 11 collet directly via Metav Werkzeuge or ask our consultants if needed. ER 11 collet – TECWERK, clamping diameter 4.5 mm, DIN 6499‑B compatible ER 11 collet for general-purpose ER chucks, designed for secure holding of tools with a 4.5 mm clamping diameter in light to medium machining tasks DIN 6499‑B compatibility Full-length tool retention 5 µm runout repeatability Clamping diameter 4.5 mm nominal Consistent concentricity for repeatable machining A precision ER 11 collet with a specified runout of 5 µm provides the core benefit of improved part quality and reduced tool wear. Low radial runout reduces vibration and imbalance during rotation, which translates into tighter tolerances and fewer rejected parts. The specified clamping diameter of 4.5 mm and the declared clamping diameter bridging (nominal − 0.5 mm) mean the collet maintains secure contact even when small diameter variations occur, supporting uninterrupted production and predictable machining outcomes. Built for direct compatibility and secure tool holding Designed to comply with DIN 6499‑B, this clamping sleeve fits standard ER collet chucks without the need for intermediate adapters. The tool is held along the entire clamping length, which distributes clamping forces and reduces bending moments on slender cutters. A 18 mm overall length and an outer diameter of 11.5 mm provide a compact yet stable interface that can be used on the lead chamfer of shanks where applicable. This combination reduces setup time and simplifies seating, making the component suitable for mixed production runs and frequent tool changes. Practical advantages for workshops and production lines The compact design delivers dependable performance in small-series fabrication and workshop environments where reliability and ease of use matter. The collet's capability to bridge minor diameter differences reduces the need for frequent tool remeasurement, while the repeatability specification supports automated and manual operations alike. For procurement managers and workshop supervisors, the result is a reduction in downtime and a more predictable maintenance cadence, reinforcing a trustable supply chain for precision tooling needs. For secure, repeatable clamping with the TECWERK ER 11 collet, contact Metav Werkzeuge for expert advice and reliable delivery from Emmerich Technical data Article number: 2000832859NW SKU: 2000832859NW Type: ER 11 Label: Spannzange Typ ER 11/4008 E Spann-D.4,5mm TECWERK Manufacturer: TECWERK Product type: ER collet Clamping range: 4,5 Packaging unit: 1 UID: 2000832859NW Facts L: 18 mm d (clamping diameter): 4.5 mm D (outer diameter): 11.5 mm Runout / repeat accuracy: 5 µm Clamping diameter bridging: nominal − 0.5 mm Special features Conforms to DIN 6499‑B Suitable for ER collet chucks Tools held along whole clamping length Can be clamped on the lead chamfer No intermediate sizing required Repeatability for production use Packaging unit: 1 FAQ Is this collet compatible with standard ER 11 chucks? Yes. The ER 11 collet (TECWERK, SKU 2000832859NW) is specified as compatible with ER‑type collet chucks and conforms to DIN 6499‑B. What clamping diameter does the collet accept? The collet is specified for a nominal clamping diameter of 4.5 mm, with a bridging allowance of nominal − 0.5 mm for small diameter variations. What runout performance can be expected? A runout (repeat accuracy) of 5 µm is stated, supporting high concentricity and reduced tool vibration during rotation. Can tools be gripped on the lead chamfer? Yes. The design permits clamping on the lead chamfer and retains tools along the entire clamping length for improved stability. How is the collet delivered? Delivery is per packaging unit: the product is supplied as a single collet (packaging unit: 1) for straightforward inventory handling. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
4.5mm ER16 Collet With 3.4mm Square Drive For Thread Cutting, 15µm Runout - TECWERK
Taking advantage of the combination of proven runout control and DIN‑compliant design ensures reliable thread cutting and consistent tool performance; order the collet directly via Metav Werkzeuge or ask our consultants for application advice. TECWERK ER16-GB collet — 4.5 mm clamping diameter, 3.4 mm internal square The TECWERK ER16-GB collet is a precision ER collet designed for thread cutting and general clamping tasks in ER chucks, offering controlled runout and secure tool engagement. ER-GB design to DIN 6499 compliant Internal 3.4 mm square for thread cutting Runout accuracy 15 µm for consistent finishes Compact dimensions: L 27.5 mm, ø 4.5 mm High precision where it matters The ER16‑GB variant delivers measurable benefits for workshop and production environments that require repeatable results. Built to DIN 6499, the design provides a standardised interface that helps maintain consistent concentricity when used in ER chucks and thread‑cutting collet holders. The specified runout accuracy of 15 µm means reduced vibration and improved surface quality on threaded parts; for operators this translates into fewer rejects and longer tool life. In practice, a low runout figure limits radial play, which is crucial when forming or cutting threads to tight tolerances. Built for thread cutting and robust clamping A defining feature is the internal square (3.4 mm) that accepts threading tools or allows positive engagement during thread cutting operations. This internal profile, combined with a clamping diameter of 4.5 mm, secures small shank tools reliably while maintaining accessibility for coolant and chips. The compact length of 27.5 mm keeps the tool assembly short, reducing overhang and improving stiffness. For those less familiar with collet terminology: the internal square is simply a fixed polygonal bore that prevents tool rotation and ensures repeatable axial positioning during cutting tasks. Integrating into workshop tool sets with confidence Compatibility with standard ER tooling simplifies inventory and changeover: the collet mates with ER type chucks and thread‑cutting collet holders without adaptation. Its ER‑GB designation denotes the specialised geometry for thread operations while preserving the general clamping characteristics of ER systems. The single‑piece supply unit makes planning straightforward and minimises logistical overhead. If there is any uncertainty about fitment or application in a specific machine, the supplier network can advise on bedding‑in procedures and suitable holders to achieve the best runout and holding performance. Contact Metav Werkzeuge for tailored application advice and to request the TECWERK ER16-GB collet – info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000834956NW Product type: ER 16-GB Description: Spannzange ER16-GB Spann‑D.4,5mm 4‑KT.3,4mm TECWERK Manufacturer: TECWERK Pack unit: 1 UID: 2000834956NW Facts Clamping range: 4.5 mm Internal square: 3.4 mm Length: 27.5 mm Diameter: 4.5 mm Runout accuracy: 15 µm Type: ER‑GB Special features Conforms to DIN 6499 Internal square for thread cutting applications Compatible with ER collet chucks and thread‑cutting collet holders Compact design for reduced overhang FAQ What is the clamping range of this collet? The clamping range is 4.5 mm as specified for the TECWERK ER16-GB collet (SKU 2000834956NW). Is the collet suitable for thread cutting? Yes, the collet features an internal square (3.4 mm) specifically intended to support thread cutting operations and positive tool engagement. How precise is the runout of this collet? The runout accuracy is 15 µm, which supports consistent surface finish and repeatable thread geometry in production settings. Will this fit standard ER chucks? The ER16‑GB design is compatible with standard ER chucks and thread‑cutting collet holders designed for ER systems. What are the main dimensions to check for tooling compatibility? Key dimensions are length 27.5 mm, clamping diameter 4.5 mm and internal square 3.4 mm; these determine fit and clearance in the tool assembly. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
4.5mm ER25-GB Collet With 3.4mm Internal Square For Thread Cutting, 15µm Runout - TECWERK
Take advantage of the combination of DIN 6499 compatibility, an internal 3.4 mm square for secure thread-cutting engagement and a precise 15 µm runout, ensuring reliable clamping performance in repetitive operations — order the collet directly via Metav Werkzeuge or consult our specialists for application advice. ER 25-GB collet — ER 25-GB collet with 4.5 mm clamping diameter and 3.4 mm internal square (TECWERK) The ER 25-GB is a compact collet manufactured to DIN 6499, designed for use with ER collet chucks and thread-cutting chucks where a secure internal square is required for driving thread-cutting tools DIN 6499 compatibility for ER collet chucks Internal 3.4 mm square for thread-cutting tools Precise 15 µm runout accuracy Clamping diameter 4.5 mm, length 34 mm Consistent runout for predictable machining results A core advantage of this collet is its runout 15 µm, which translates directly into repeatable hole positions and consistent tool life. Manufactured to the DIN standard, the component offers a defined interface for ER systems and helps to reduce vibration and premature tool wear. For production environments where cycle-to-cycle consistency matters, the controlled radial accuracy contributes to higher first-pass yields and simplifies downstream quality control. Secure engagement for thread-cutting applications The built-in internal square (3.4 mm) enables positive torque transfer to thread-cutting tools without relying solely on clamping friction. Combined with the clamping diameter 4.5 mm and a compact length 34 mm, this geometry is optimised for use in machines where space and axial accessibility are limited. The design reduces the risk of tool slip during cutting operations and facilitates faster tool changes when used in ER-style collet chucks. Integration into workshop processes and serviceability The collet’s standardised dimensions and DIN conformity make it straightforward to replace or add to existing ER tool-holding inventories, supporting lean tool management. Fewer tool changes and stable clamping reduce machine downtime, while the compact construction assists in maintaining accessibility in tight fixtures. If further specification matching or application guidance is required, technical consultation can be provided to ensure optimal selection and integration. Contact Metav Werkzeuge for precise ER-collet solutions and tailored advice from our Emmerich-based experts, available to support specification and supply decisions Technical Data Article number: 2000834961NW Type: ER 25-GB Product: Collet GB Brand: TECWERK Dimensions & tolerances Clamping range: 4.5 mm Runout accuracy: 15 µm Length: 34 mm Diameter: 4.5 mm Internal square: 3.4 mm Special features DIN 6499 compliant Internal square for thread cutting Compatible with ER collet chucks Intended for thread-cutting and collet-chuck applications FAQ What tolerance can be expected from this collet? The ER 25-GB collet from TECWERK is specified with a runout accuracy of 15 µm, providing tight radial control for precise machining tasks. Is the collet suitable for thread-cutting tools with square drive? Yes, the internal 3.4 mm square of the ER 25-GB secures thread-cutting tools and enables positive drive engagement during cutting operations. Which collet chuck types are compatible with this item? This collet is designed for ER collet chucks manufactured to DIN 6499 and is compatible with thread-cutting and ER-style collet chucks. What are the key dimensions to consider when replacing an existing collet? Key dimensions for the ER 25-GB are clamping diameter 4.5 mm, length 34 mm and internal square 3.4 mm; the SKU is 2000834961NW for precise identification. Does the product data specify the material or coating? The available data for the ER 25-GB does not specify material or coating; refer to the supplier specification or request additional technical data if required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
4.5mm ER32-GB Collet With 3.4mm Square Drive, 15µm Runout, 40mm Length - TECWERK
The combination of precise runout control and a DIN 6499 internal square delivers consistent thread quality and reliable tapping performance; order the collet directly via Metav Werkzeuge or consult our specialists for technical matching and fast supply. TECWERK ER 32-GB collet (internal square, 4.5 mm clamping) The ER 32-GB collet is a compact tapping collet with an internal square designed for secure thread cutting in ER systems, suitable for precision workshops and toolrooms. DIN 6499 internal square for tapping Runout accuracy 15 µm Clamping diameter 4.5 mm Compact length 40 mm Optimised concentricity for high-quality threads Manufactured to meet the DIN 6499 specification, this tapping collet provides an internal square interface that centres taps precisely and reduces wobble during thread cutting. The guaranteed runout of 15 µm ensures high concentricity, which translates into cleaner threads and fewer rejects. For operations where repeatable thread geometry matters, this level of runout control reduces rework and increases first-pass yield on production and maintenance tasks. Compact dimensions for straightforward integration With a total length of 40 mm and a clamping diameter of 4.5 mm, the collet fits into standard ER collet chucks without added bulk, keeping setups compact and accessible. The internal square measures 3.4 mm, matching common tap shank sizes used in small-diameter threading. This compact footprint simplifies toolpath planning, shortens setup times and allows reliable use in confined toolholders or multi-spindle arrangements. Consistent clamping that stabilises processes Precision in manufacture results in tight tolerances and consistent clamping, both vital for reducing vibration and tool wear during tapping. The secure hold on the tap minimises axial and radial movement, which extends tap life and lowers the frequency of changes. For maintenance workshops and small-batch production, that stability leads to measurable improvements in process reliability and throughput without the need for frequent adjustments. Practical application notes and workshop advantages Designed primarily for tapping and thread-cutting tasks in ER systems, this collet suits applications where small-diameter threads are produced repetitively. The collet is supplied as a single unit (packaging unit: 1) and is especially useful when paired with dedicated tap holders or ER tapping chucks. For integration into an existing tool set, ensure the chuck accepts ER32 and that the tap shank matches the 3.4 mm internal square for optimal engagement. For precise tapping performance from TECWERK, contact Metav Werkzeuge for product matching, technical advice and reliable supply directly from Emmerich. Technical data SKU: 2000834969NW Type: ER 32-GB Label: Spannzange ER32-GB Spann-D.4,5mm 4-KT.3,4mm TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Clamping diameter: 4.5 mm Length: 40 mm Square drive: 3.4 mm Runout / roundness: 15 µm Special features DIN 6499 internal square for tapping Compatible with ER collet chucks Suitable for thread cutting in ER systems FAQ What is the runout specification and why does it matter? The runout is specified at 15 µm; this level of concentricity reduces wobble during tapping and improves thread quality when using the TECWERK ER 32-GB collet. Is the collet compatible with standard ER32 chucks? Yes, the collet is designed for ER systems and fits ER32 collet chucks for secure tapping and clamping operations. Which tap shank size does the internal square accept? The internal square measures 3.4 mm, suitable for matching taps with a corresponding square shank or holders designed for that dimension when using the ER 32-GB. How long is the collet and how does size affect its use? Total length is 40 mm; the compact size facilitates installation in confined toolholders and helps maintain rigidity during threading tasks. How is the product supplied? The item is supplied as a single unit, packaging unit: 1, ready for immediate fitting into an ER32 system. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
4.5mm Quick Change Insert 3.4mm Square Drive For DIN 371 M4 / DIN 374/376 M6, L3 4mm - TECWERK
Take advantage of a compact, precision-minded tool that combines fast changeover and secure torque transmission for efficient tapping operations; the insert’s compatibility with DIN tap sizes simplifies tooling choices and keeps cycle times low. Order directly via Metav Werkzeuge or consult our specialists for application advice. Quick-change insert SE 4.5 mm x 3.4 mm, Size 1 – TECWERK The quick-change insert SE 4.5 mm x 3.4 mm, Size 1 is a compact tapping insert designed for use with standard DIN thread taps in small- to medium-batch production and workshop environments Rapid insert change for efficient tooling Compatible with DIN 371 M4 and DIN 374/376 M6 Square shank 3.4 mm for secure torque transfer No safety coupling; stable clamping via quick clamp Precision where short projection and rigidity matter The quick-change insert is built for stable tapping in confined setups. With a short projection and compact body, the holder reduces lever-arm forces and improves thread quality by limiting axial deflection. Compatibility with DIN 371 M4 and DIN 374/376 M6 taps ensures straightforward integration into existing toolsets, while the square-shank drive provides direct torque transfer, reducing slippage and wear during interrupted cuts. Efficient handling and toolroom productivity Changeover speed is a practical advantage: inserts are held by a quick-clamping device, enabling rapid replacement and minimising machine downtime. The absence of a safety coupling results in a more direct drive connection, which is beneficial where consistent torque transmission is required. For workshops seeking to speed set-up times without complex adapters, the quick-change system offers a clear efficiency gain and supports lean production routines. Compatibility and application guidance for machinists Designed as a Size 1 insert, the component matches specific shank interfaces; different shank sizes require corresponding inserts to guarantee proper engagement. The holder’s design keeps the tap aligned during engagement, which is particularly useful for delicate or high-thread-count taps. This focus on precise alignment and robust clamping helps maintain repeatable thread profiles across runs and operators. Installation, inspection and maintenance notes Installation is straightforward: the tap is located in the insert and secured by the quick-clamping mechanism, while torque is transmitted via the shaft square to the spindle. Regular inspection of the clamping faces and the square drive is recommended to preserve fit accuracy. Spare inserts for other shaft sizes are available where different square measurements are in use, allowing a coherent modular approach to tooling. Contact Metav Werkzeuge for application advice and rapid supply from Emmerich – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 4000832635NW Label: Quick-change insert SE 4.5mm x 3.4mm Size 1 for DIN 371 M4 and DIN 374/376 M6 Product type: Schnellwechseleinsatz SE Manufacturer: TECWERK Size: Gr.1 Suitable for: DIN 371 M4; DIN 374/376 M6 Packaging unit: 1 Facts Diameter: 4.5 mm Square shank: 3.4 mm L3: 4 mm L4: 21.5 mm L5: 7 mm D: 30 mm L1: 18.5 mm D1: 19 mm Special features without safety coupling inserts hold thread taps via quick-clamping device torque transmission via shaft square different inserts required for different shank sizes FAQ Which tap sizes are compatible with this insert? The quick-change insert SE 4.5 mm x 3.4 mm, Size 1 is specified for use with DIN 371 M4 and DIN 374/376 M6 taps and is designed to secure those sizes reliably. How is torque transmitted through the insert? Torque is transmitted via the square shank (3.4 mm) of the holder; the design ensures direct drive transfer from spindle to tap without a safety coupling. Are different shank sizes available for other tap ranges? Different inserts are required for other square shank dimensions; the product line allows matching inserts to the specific shaft measurement in use. What maintenance is recommended for long service life? Regular inspection of clamping faces and the square drive is advised; cleaning and light lubrication where applicable will help preserve precise fit and reduce wear. Is this insert suitable for high-volume production? The compact design and quick-clamping mechanism make the insert appropriate for repetitive tapping tasks in small- to medium-volume production where changeover speed and repeatability are priorities. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
4.5mm Quick-Change Insert SES 3.4mm Square Shank DIN 371 M4, Adjustable Torque Limiter - TECWERK
Take advantage of an adjustable safety clutch and secure torque transfer via the square shank to protect taps and reduce downtime; order the quick-change insert directly via Metav Werkzeuge or consult our specialists for fitment advice. SES Quick-change insert 4.5 mm x 3.4 mm (Size 1) – adjustable safety clutch | TECWERK The SES Quick-change insert 4.5 mm x 3.4 mm (Size 1) is a compact torque-limiting insert designed for safe M4 tapping to DIN 371 standards. Adjustable safety clutch to limit torque Prevents tap breakage during tapping Torque transfer via 3.4 mm square shank Engineered protection for reliable tapping The insert combines an adjustable safety clutch with direct torque transmission over the square shank to prevent sudden tool failure during tapping. This torque-limiting function reduces the risk of tap breakage and the consequential rework, improving process reliability. By disengaging or slipping at preset torque levels, the mechanism protects both the tap and the workpiece, which translates into fewer interruptions and more consistent production runs. Clear compatibility for workshop integration Designed for DIN 371 M4 tapping, the compact unit fits shafts requiring a 3.4 mm square drive and is identified as Size 1, making it straightforward to match with corresponding holders. The specification that different shaft sizes need different inserts ensures correct pairing and predictable performance; selecting the correct insert prevents misfit and maintains the intended torque behaviour. This compatibility-focused design simplifies inventory and helps streamline tool change procedures in mixed-size operations. Reduced downtime through simple interchange and robust design Because torque is transmitted via the shaft square, the transfer path is mechanically direct and predictable, which helps maintain consistent results across repeated cycles. The quick-change concept speeds up replacement, while the clutch prevents costly tap breakage—together these factors lower maintenance needs and shorten mean time to repair. For production environments where thread quality and uptime matter, this approach supports continuous operation and a measurable reduction in scrap and repair work. Practical applications and efficiency gains Ideal for industrial workshops and maintenance tasks that involve M4 threads, this quick-change insert is suited to repetitive tapping where mechanical protection is essential. The adjustable limit allows tuning to specific materials and thread conditions, improving thread integrity and operator confidence. When integrated into a standard tapping workflow, it helps secure process stability and supports cost-effective operation by cutting the frequency of tool failure and intervention. Contact Metav Werkzeuge today for personalised advice on fitment and availability of the TECWERK SES quick-change insert and to confirm the correct insert for a specific shaft size Technical data Article number: 4000832661NW Product: Quick-change insert SES (Size 1) Designation: SES 4.5 mm x 3.4 mm for DIN 371 M4 Manufacturer: TECWERK Packaging unit: 1 Dimensions Diameter: 4.5 mm Square shank: 3.4 mm Suitable for: DIN 371 M4 L1: 18.5 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm D1: 19 mm Special features Adjustable safety clutch for torque limiting Designed to prevent tap breakage Torque transmission via shaft square Different inserts required for different shank sizes Type/size: Size 1 FAQ How does the adjustable clutch protect taps during tapping? The adjustable clutch slips or disengages at a preset torque level, so the SES quick-change insert absorbs overloads and prevents tap breakage by limiting the torque transmitted to the tap. Is this insert suitable for standard M4 taps? Yes, the insert is specified for DIN 371 M4 tapping and is manufactured to fit the corresponding tap and holder dimensions. What shank size does the insert require? This Size 1 insert uses a 3.4 mm square shank for torque transfer; different shaft measures require matching inserts. Can the torque limit be adapted for different materials? The adjustable safety clutch permits setting the torque threshold to suit different materials and cutting conditions, helping to protect both tool and workpiece. Will using the insert reduce workshop downtime? By preventing tap breakage and enabling quick changes, the insert supports shorter repair times and more consistent cycles, contributing to reduced downtime. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
4.5mm Quick-Change Insert SES 3.4mm Square Shank For DIN 374/376 M6, Adjustable Torque Limiting Safety Clutch - TECWERK
Take advantage of the combination of precise torque control and a compact Size 1 interface to reduce tap breakage and unplanned downtime; order directly via Metav Werkzeuge or consult our specialists for compatibility and availability. Quick-change insert SES 4.5 mm x 3.4 mm, Size 1 for DIN 374/376 M6 (TECWERK) The Quick-change insert SES 4.5 mm x 3.4 mm, Size 1 is a compact replacement insert designed for tapping operations with DIN 374/376 M6 taps, featuring an adjustable safety clutch for torque limitation. Adjustable safety clutch prevents tap breakage Torque transmission via shaft square interface Compatible with DIN 374/376 M6 taps Compact Size 1 for small shank interfaces Prevents tap breakage and protects production The central advantage of this quick-change unit is the adjustable safety clutch, which limits torque at the drive end and thereby prevents sudden tap fractures during demanding threading tasks. By decoupling excessive torque, the component reduces the risk of scrapped workpieces and machine stoppages, improving process reliability and cutting tool life. This results in fewer interruptions and a steadier production flow for small-batch and series operations alike. Reliable torque transfer for defined thread quality Torque is transmitted through the square shank interface, ensuring positive drive without slippage under normal operating loads. The insert is specified with a 4.5 mm diameter and a 3.4 mm square connection, matching the mechanical requirements of the listed tap standard. This construction yields consistent thread formation, particularly important when machining steels or mixed materials where controlled torque prevents tap overload and preserves thread accuracy. Compact dimensions for easy integration in tool holders With compact axial dimensions (for example L3: 24.5 mm, L4: 21.5 mm, L5: 25.5 mm) the insert minimises overhang and fits standard quick-change systems for small shafts. The small footprint reduces bending moments and supports more accurate alignment in the spindle or holder; this is especially useful in confined fixtures or multi-spindle arrangements. The Size 1 form factor means the unit is intended for lighter-duty tapping installations where space and precision matter. Designed for industrial use and broad workshop relevance Engineered to work with taps conforming to DIN 374/376 M6, the insert is suited to maintenance shops, tool rooms and production lines where repeatable results are required. The torque-limiting feature is particularly effective when tapping blind holes or interrupted cuts, lowering the incidence of tap breakage and attendant downtime. The overall design reflects workshop realities: robust torque control, straightforward interchangeability and compatibility with different shaft measures via dedicated inserts. Contact Metav Werkzeuge for stock and technical guidance on the TECWERK SES insert or to confirm compatibility with existing holders — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt advice. Technical Data Article number: 4000832663NW Product: Quick-change insert SES Label: Schnellwechseleinsatz SES 4,5mmx3,4mm Gr.1 f.DIN 374/376 M6 Brand: TECWERK Packaging unit: 1 Facts Diameter: 4.5 mm Square shank: 3.4 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm L1: 18.5 mm D1: 19 mm Special features Adjustable safety clutch for torque limitation Prevents tap breakage Torque transmission via shaft square Suitable for DIN 374/376 M6 taps Requires different inserts for different shank sizes FAQ What problem does the adjustable safety clutch solve? The adjustable safety clutch on this SES quick-change insert limits transmitted torque to prevent tap breakage, protecting both tool and workpiece during tapping operations. Is this insert compatible with standard M6 taps? Yes, the unit is designed for use with taps to DIN 374/376 M6 and provides a Size 1 interface for holders that accept the specified shank dimensions. Which shank and diameter dimensions apply to this insert? The insert features a 4.5 mm diameter with a 3.4 mm square shank interface; further axial dimensions are listed in the technical data for precise integration. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
40 mm Vertical Assembly Aid, DIN 69871A - Vertex
Take advantage of the combination of standardised interface compatibility, a compact yet stable mass and straightforward inventory identification to keep tool changes predictable and repeatable. Order the VTS-SK40 through Metav Werkzeuge or request advice from our consultants to ensure smooth integration into existing toolroom workflows. VTS-SK40 Vertical Mounting Aid by Vertex – 40 mm interface, DIN 69871A A VTS-SK40 Vertical Mounting Aid designed for precise alignment and safe handling of DIN 69871A toolholders in production and workshop environments. Vertical mounting aid for 40 mm shank Compatible with DIN 69871A toolholders Solid construction, stable 12.4 kg mass SKU VTS-SK40 with GTIN 4061905089138 Rapid, repeatable alignment for consistent starts The VTS-SK40 is designed to provide a repeatable mechanical reference when assembling or changing toolholders that conform to DIN 69871A. The defined 40 mm interface ensures consistent engagement with compatible holders, reducing the need for repeated manual adjustments and lowering the likelihood of positional error. By standardising the connection geometry, the mounting aid supports shorter setup phases and more reliable machine starts, which contributes directly to predictable cycle performance in small-series or batch production. Stable mass improves handling and reduces movement With a mass of 12.4 kg, the assembly fixture offers a steady base that dampens minor disturbances during the mounting process. This inherent stability reduces inadvertent movement while seating or unclamping toolholders, helping to preserve contact surfaces and minimising handling-induced wear. Produced under Vertex manufacturing discipline, the unit combines robust mechanical behaviour with a compact footprint, making it suitable for bench-top use or integration into dedicated mounting stations without occupying excessive space. Straightforward integration and procurement benefits The vertical mounting device is compatible with established tooling systems, allowing workshops to adopt it without major process changes. As a purpose-built mounting aid, it reduces manual touchpoints during tool changes and simplifies stock management by clear identification via SKU VTS-SK40 and GTIN 4061905089138. For production planners the clear specification and conformity to a recognized standard support faster acceptance testing and easier spare part planning, thereby helping to maintain continuous supply to the shopfloor. Contact Metav Werkzeuge to confirm stock availability of the VTS-SK40 and to discuss how the 40 mm DIN 69871A interface can be implemented in the current toolroom setup; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VTS-SK40 GTIN: 4061905089138 Manufacturer: Vertex Facts Weight: 12.4 kg Interface / Aufnahme: 40 mm Standard: DIN 69871A eClass: 21029203 ETIM: EC001959 Special features Vertical mounting orientation Designed for DIN 69871A toolholders Brand: Vertex FAQ Is the mounting aid compatible with toolholders to DIN 69871A? The VTS-SK40 vertical mounting aid is designed specifically for use with toolholders that conform to DIN 69871A, providing a consistent 40 mm interface for correct seating. What is the physical mass and why does it matter? The fixture weighs 12.4 kg, which gives a stable base that helps to reduce inadvertent movement during mounting and improves handling safety for repetitive operations. Can the device be used on a standard workshop bench or fixture table? Yes, the vertical mounting configuration and compact footprint make the unit suitable for bench-top use or integration into existing fixture tables where DIN 69871A interfaces are employed. How is the product identified for procurement and inventory control? Identification is via SKU VTS-SK40 and GTIN 4061905089138, which simplifies ordering and stock management for procurement systems. Who manufactures the mounting aid? The unit is manufactured by Vertex and supplied under the designation VTS-SK40 for vertical mounting and alignment tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
40,2mm Schnellspannbohrfutter Supra S leichte Ausführung selbstspannend, Innengewinde, Spannbereich 1,0-13mm, Rechtslauf - RÖHM
Supra S Schnellspannbohrfutter von RÖHM Das Supra S Schnellspannbohrfutter ist ein selbstspannendes Bohrfutter für Rechtslauf, ausgelegt auf schnellen Werkzeugwechsel und präzise Bohrung mit einem Spannbereich von 1,0–13 mm. Selbstspannend für schnellen Werkzeugwechsel Spannbereich 1,0–13 mm Aufnahme 1/2” - 20 (Zoll-Gewinde) Leichte Ausführung mit Ø 40,2 mm Außendurchmesser Mit Innengewinde für sichere Montage Schneller Wechsel reduziert Stillstandzeiten und erhöht Durchsatz Die Selbstspannung des Schnellspannbohrfutters ermöglicht einen Werkzeugwechsel ohne zusätzlichen Schlüssel, wodurch Rüstzeiten deutlich reduziert werden. Durch die kompakte, leichte Ausführung bleibt die Belastung der Spindel gering, was die Standzeit von Maschinensystemen erhöht. Anwender profitieren von schneller Verfügbarkeit der Maschine und konstanter Bearbeitungsqualität bei Serien- und Einzelteilen. Kompatibilität und Präzision für vielfältige Anwendungen Dank der Aufnahme 1/2” - 20 ist das Bohrfutter mit vielen Standardspindeln kompatibel; der Spannbereich 1,0–13 mm deckt gängige Werkzeugdurchmesser zuverlässig ab. Die definierte Drehrichtung für Rechtslauf sorgt für sicheren Halt beim Eintauchen in unterschiedlichste Werkstoffe. So bleibt die Bohrbildpräzision erhalten und Nacharbeit wird minimiert. Geeignetes Einsatzfeld und Zielgruppe Das Schnellspannbohrfutter richtet sich an Werkstätten, Instandhaltung und Serienfertigung, die effiziente Rüstprozesse und hohe Wiederholgenauigkeit benötigen. Durch die robuste Auslegung eignet sich das Produkt für Kunden, die eine verlässliche Verbindung zwischen Spindel und Werkzeug fordern, etwa im Metallbau, Maschinenbau oder bei Reparaturarbeiten. Montage, Wartung und langlebige Nutzung Das Vorhandensein eines Innengewindes vereinfacht die Montage und erlaubt eine sichere Befestigung am Spindelkonus. Regelmäßige Reinigung und leichte Schmierung der Spannbacken erhöhen die Lebensdauer des Bohrfutters und sichern konstante Spannkräfte. Durch die geringe Bauform mit 40,2 mm Außendurchmesser bleibt die Zugänglichkeit an engen Werkstücken erhalten. Für professionelle Anwendungen empfiehlt sich das Supra S Schnellspannbohrfutter von RÖHM zur Optimierung von Rüstzeiten und zur Sicherstellung gleichbleibender Bohrergebnisse; Beratung und Lieferung erfolgen direkt über Metav Werkzeuge GmbH, eMail info@metav-werkzeuge.com, Tel +49 2822 7131930 Produktmerkmale Artikelnummer: 4000832216NW Marke: RÖHM Ausführung: Supra S Produktart: Schnellspannbohrfutter Aufnahme: 1/2” - 20 Daten Spannbereich: 1,0-13 mm Außendurchmesser: 40,2 mm Verpackungseinheit: 1 Besonderheiten selbstspannend leichte Ausführung Innengewinde Drehrichtung: Rechtslauf Aufnahme: 1/2” - 20 (Zoll-Gewinde) FAQ Wie groß ist der Spannbereich dieses Bohrfutters? Der Spannbereich des Supra S Schnellspannbohrfutters liegt bei 1,0–13 mm und eignet sich damit für viele Standardbohrer in Werkstatt und Produktion. Ist das Bohrfutter für Rechts- und Linkslauf geeignet? Das Supra S von RÖHM ist für Rechtslauf ausgelegt; die Drehrichtung gewährleistet sichere Spannkräfte bei konventioneller Spindelrichtung. Welche Aufnahme hat das Bohrfutter? Das Bohrfutter verfügt über eine Aufnahme 1/2” - 20, ein gängiges Zoll-Gewinde für die Befestigung an Standardspindeln. Eignet sich das Bohrfutter für den Dauereinsatz in der Serienfertigung? Ja, die leichte Ausführung kombiniert mit der Selbstspannung macht das Supra S Schnellspannbohrfutter robust und effizient für häufige Werkzeugwechsel in der Serienfertigung. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40-50mm Hollow Spindle Stop With Internal Clamping Screw, Adjustable Length - TECWERK
Take advantage of a compact internal stop that expands to grip the spindle interior, covering a 0–50 mm clamping range and locking securely with a tightening screw operated by a special key; order the device via Metav Werkzeuge or consult the Metav team for application advice. Hollow spindle stop for spindle Ø 40–50 mm · TECWERK A Hollow spindle stop for spindle Ø 40–50 mm, engineered to provide a secure axial location inside hollow spindles for reliable machining set-ups. Expands to grip inner spindle wall Clamping range 0–50 mm Tool released and adjusted with special key Ensures secure axial positioning Precision internal clamping for repeatable set-ups The device is designed to be inserted from the rear into a hollow spindle and fixed by tightening a screw, which forces the clamping jaws outwards against the inner wall. This mechanism delivers secure seating during axial loading and prevents unwanted movement, improving repeatability across multiple components. The simple mechanical principle avoids complex electronics and provides a robust solution for frequent set-up changes in production environments. Fast installation and adjustable positioning to save time Installation and adjustment are carried out with a special key, allowing the stop to be tightened, released and shifted in length without disassembly of the spindle. The clear mechanical operation reduces set-up time and minimises machine downtime, which contributes to faster throughput and fewer rejects. The adaptable expansion principle makes the device suitable for tasks that require quick repositioning and consistent axial stops, supporting efficient workflow in machine shops and maintenance departments. Designed for workshop reliability and safe handling Constructed for insertion into hollow spindles with a working span of 0–50 mm, the stop gives a secure internal anchor point for through-spindle operations or for applications where external fixturing is impractical. The tightening action converts rotational torque from the key into radial force on the jaws, ensuring a stable hold without relying on external clamps. Supplied as a single unit, the component is straightforward to store and fits common service routines for spindle-mounted tooling. For tailored advice on integrating the TECWERK hollow spindle stop into production or to order via Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832504NW Product type: Hollow spindle stop Brand: TECWERK Facts Clamping range: 0–50 mm Packaging unit: 1 Special features Inserted from rear into hollow spindle and tightened with a special key Tightening screw presses jaws against the spindle inner wall for secure seating Released with key and slid to adjust axial position FAQ What clamping range does the hollow spindle stop cover? The hollow spindle stop by TECWERK covers a clamping range of 0–50 mm, suitable for spindles within that diameter window. How is the device installed and adjusted? The stop is inserted from the rear into the hollow spindle and tightened with a special key; loosening the key releases the jaws and allows axial repositioning. Can the stop maintain position under axial load? Yes, the tightening screw forces the jaws against the inner wall of the spindle so that the stop provides a secure axial hold during machining. Is the product supplied ready to fit? The TECWERK hollow spindle stop is supplied as a single unit and is ready for insertion and clamping with the appropriate key. Which applications are typical for this type of stop? This internal stop is typically used where an internal axial locate is needed—such as through-spindle operations, machining of long workpieces, or situations where external fixturing is impractical. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40.2mm Heavy Duty Self‑Clamping Keyless Drill Chuck 0–10mm B12 Right‑Hand - TECWERK
Take advantage of the heavy-duty industrial design, the self-clamping action and the compact B12 taper interface for steady performance in stationary drills; these features combine to reduce interruptions and secure consistent hole quality. Order the TECWERK quick-action drill chuck directly via Metav Werkzeuge or ask our consultants if needed. TECWERK quick-action keyless drill chuck – 0–10 mm, B12 taper, right-hand rotation The TECWERK quick-action keyless drill chuck is a robust, self-clamping chuck designed for stationary machines and right-hand rotation applications, offering a compact B12 taper mount and a versatile 0–10 mm clamping range. Heavy-duty industrial design Self-clamping mechanism Clamping range 0–10 mm B12 taper mount for stationary spindles For right-hand rotation, Ø 40.2 mm Reliable performance for continuous production The chuck's construction focuses on operational reliability: a heavy-duty industrial design paired with a self-clamping mechanism keeps drills securely held under cutting loads, reducing the frequency of retightening and unplanned stops. In practice, this stability translates into steadier cycle times and improved hole repeatability on production lines and in demanding workshop environments. The combination of robust components and straightforward functionality supports longer run times between inspections and fewer process deviations, which is particularly valuable for small-batch and continuous machining alike. Compact interface and wide bit compatibility A 0–10 mm clamping range covers the most commonly used twist drill sizes without the need for multiple adapters, simplifying tool selection and changeover. The B12 taper refers to the taper-style spindle interface that allows direct mounting to compatible spindles, ensuring a secure mechanical fit while keeping the overall assembly compact. With an outside diameter of Ø 40.2 mm, the chuck is suitable where space is limited around the spindle nose. Engineered for right-hand rotation, the internal jaw geometry and gripping action are optimised for conventional forward drilling, promoting reliable bit retention and consistent cutting forces. Low-maintenance design that protects uptime The chuck's straightforward mechanical design minimises wear points and permits routine inspection and lubrication without specialised tools, supporting reduced downtime and predictable maintenance intervals. Quick-action operation speeds up bit changes on both bench and production machines, aiding throughput without sacrificing clamping force. For workshops seeking to integrate or replace spindle-mounted chucks, the compact taper mount and proven mechanical concept simplify compatibility checks and spare-part planning, helping to protect production schedules and maintain process quality. For tailored advice on integrating the TECWERK quick-action keyless drill chuck into existing equipment, contact Metav Werkzeuge in Emmerich for expert consultation and order processing: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 2000832052NW Type: Quick-action keyless drill chuck Brand: TECWERK Mount: B12 taper Clamping range: 0–10 mm Rotation: right-hand Outside diameter: 40.2 mm Version: heavy-duty industrial execution Packaging unit: 1 Facts Clamping range 0–10 mm Outside diameter 40.2 mm Packaging unit 1 Special features Self-clamping mechanism Heavy-duty industrial execution for stationary machines With taper mount Designed for right-hand rotation FAQ What machines is this chuck suitable for? The TECWERK quick-action keyless drill chuck is intended primarily for stationary machines with a compatible B12 taper spindle and is optimised for right-hand rotation setups. What clamping sizes are supported? Clamping is specified as 0–10 mm, covering standard twist drill sizes commonly used in workshop and production environments. How does the B12 taper affect installation? A B12 taper provides a compact taper interface for direct fitting to matching spindles; proper seating and checking for compatibility with the machine spindle are recommended before commissioning. Is the chuck self-tightening under load? Yes, the chuck features a self-clamping mechanism that increases gripping force under forward drilling load, helping to maintain bit retention during operation. What maintenance is required? Routine inspection, light lubrication and checks for jaw wear are recommended to sustain performance; the design allows these tasks to be completed without specialised tools. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40.2mm Heavy Duty Supra Keyless Drill Chuck 0-10mm B16 Right-Hand - RÖHM
Combining heavy-duty construction, a self-tightening clamping system and a secure B16 taper, this chuck ensures reliable, repeatable performance in stationary drilling applications; order directly via Metav Werkzeuge or ask the consultants for tailored advice. Supra quick-change drill chuck — self-tightening heavy-duty chuck, 0–10 mm clamping range, B16 taper (RÖHM) The Supra quick-change drill chuck is a self-tightening, heavy-duty quick-change chuck with a B16 taper, designed for stationary machines running in right-hand rotation. Self-tightening mechanism for secure grip 0–10 mm clamping range for standard drill bits B16 taper for rigid, concentric mounting Heavy-duty design for stationary machines Secure clamping for consistent drilling results The self-tightening mechanism provides a consistently firm hold on cutting tools, reducing slippage and improving concentricity in drilled holes. With a 0–10 mm clamping range, the chuck accommodates most common twist drills and small tools, keeping changeover times short and tool run-out low. The combination of reliable hold and compact construction contributes directly to reduced rework and steadier production rates when machining routine holes. Built for demanding stationary machining Designed as a heavy-duty industrial variant, this chuck suits stationary equipment in workshops and production lines where robustness matters. The B16 taper ensures rigid seating in compatible spindles, while the specified right-hand rotation matches standard drilling directions. The modest outer diameter (40.2 mm) and solid build make the unit easy to integrate without excessive overhang, helping to maintain alignment and minimise vibration during operation. Practical integration, simple maintenance Compatibility with B16 taper spindles and the self-tightening design mean straightforward installation and minimal additional fixturing. The mechanism is serviceable and does not rely on external keying for normal operation, simplifying routine checks and lowering housekeeping time. Where precise terminology helps clarify selection: a B16 taper refers to the machine-side mount standard, and the chuck’s self-tightening action tightens under normal drilling torque, improving security under load. For secure, repeatable drilling performance with a proven RÖHM design, contact Metav Werkzeuge to check spindle fitment and order the Supra quick-change drill chuck (SKU 4000832044NW) for your machine bay; Metav Werkzeuge can advise on compatibility and delivery from Emmerich. Technical data Article number: 4000832044NW SKU: 4000832044NW Product type: Quick-change drill chuck Model: Supra Mounting: B16 Clamping range: 0–10 mm Rotation: right-hand Outer diameter: 40.2 mm Packaging unit: 1 Facts Clamping range: 0–10 mm Outer diameter: 40.2 mm Mounting standard: B16 Packaging unit: 1 Special features Self-tightening mechanism Heavy-duty industrial version for stationary machines Taper mounting (B16) Designed for right-hand rotation FAQ What is the clamping range of this chuck? The RÖHM Supra quick-change drill chuck has a clamping range of 0–10 mm, suitable for most small to medium twist drills. Which machine taper is required for mounting? Mounting requires a B16 taper spindle; the chuck seats directly into a B16 machine taper for rigid support. Is the chuck suitable for high-torque or continuous production use? The heavy-duty construction and self-tightening mechanism make this chuck appropriate for demanding stationary drilling tasks and continuous production environments. How does the self-tightening feature work in practice? Under normal drilling torque the self-tightening mechanism increases grip on the tool shank, reducing the risk of slippage and improving repeatability for the RÖHM Supra quick-change drill chuck. Can this chuck be used on left-hand rotating spindles? This particular version is specified for right-hand rotation; for left-hand applications, an alternative model should be selected. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40.2mm Supra S Quick-Change Drill Chuck 1.0-13mm, Self-Clamping, 3/8”–24 Thread, Right-Hand - RÖHM
Take advantage of the self-tightening, lightweight design and the 1.0–13 mm clamping range for faster tool changes and reduced downtime; enquire about availability and delivery from Metav Werkzeuge for straightforward procurement. RÖHM Supra S keyless drill chuck — self-tightening, 1.0–13 mm The RÖHM Supra S keyless chuck designed for assembly on spindles with a 3/8"-24 mounting thread, optimised for right-hand rotation in light-duty applications Self-tightening lightweight design Clamping range 1.0–13 mm Internal 3/8"-24 mounting thread For right-hand rotation (reliable run) Faster changeovers and steady clamping for daily workshop use The quick-change chuck offers a self-tightening mechanism that reduces the time spent re-clamping and helps maintain concentricity during drilling operations. With a 1.0–13 mm clamping range, the device covers the most common drill sizes used in general metalworking and maintenance tasks, meaning fewer tool swaps and smoother workflows. The lightweight construction contributes to lower spindle load and quicker manual handling without compromising the gripping action, which supports higher process efficiency in repetitive assembly or repair work. Robust mounting and clear mechanical compatibility The chuck mounts on a 3/8"-24 internal thread, making it compatible with a wide range of hand-held and benchtop drills that accept this standard spindle interface. Its designated right-hand rotation ensures full compatibility with conventional drilling directions and prevents unintended loosening under normal use. The compact outer diameter of 40.2 mm allows access in tighter fixtures and keeps the tool profile neat when working in confined spaces. These measurable specifications enable reliable planning for integration into existing toolsets. Practical benefits that reduce operational risk By combining a lightweight form with self-tightening clamping, the chuck minimises operator fatigue during repetitive changes and improves safety by maintaining a secure grip on the tool shank. The simple internal-thread attachment simplifies fitting procedures and reduces assembly time compared with more complex mounting systems. For workshops looking to standardise on robust, easy-to-use clamping elements, this quick-change unit offers repeatable performance and straightforward maintenance, supporting uninterrupted production cycles and dependable daily operation. Contact Metav Werkzeuge for availability and tailored advice on integrating the RÖHM Supra S keyless drill chuck into existing equipment; Metav’s specialists will provide shipment and compatibility details from their Emmerich centre Technical data Article number (SKU): 4000832215NW Type: Supra S Product: Keyless drill chuck Manufacturer: RÖHM Facts Clamping range: 1.0–13 mm Mounting thread: 3/8"-24 Outer diameter: 40.2 mm Packaging unit: 1 Special features Self-tightening Lightweight design Internal thread mounting For right-hand rotation (Rechtslauf) FAQ What clamping sizes does this chuck accept? The chuck accepts drill shanks from 1.0 mm up to 13 mm, providing a versatile clamping range suitable for general metalworking and maintenance tasks. Which spindle interface is required for fitting this chuck? Fitting requires a 3/8"-24 internal thread on the spindle; this is the specified mounting interface for the RÖHM Supra S keyless chuck. Is the chuck suitable for left-hand rotation machines? This model is specified for right-hand rotation; for left-hand applications, a different version or adapter should be considered. How does the self-tightening feature benefit daily use? The self-tightening action reduces the need for frequent re-tightening, improves concentricity under cutting forces and shortens tool-change times during repetitive operations. Can the chuck be used on hand-held drills as well as benchtop machines? Yes; the 3/8"-24 mounting and compact design make it suitable for compatible handheld and benchtop spindles that accept this thread standard. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm 12V/6W LED Lamp Reinforced, IP20 - Vertex
Reliable workshop illumination with reinforced construction and an articulated 400 mm arm delivers focused 12V/6W LED light and a compact 1.2 kg body for stable positioning. Benefit from durable indoor protection (IP20), simple mains connection at 220V, and straightforward integration into bench setups. Order the VLED-20L directly via Metav Werkzeuge or ask our consultants if needed. VLED-20L reinforced LED lamp by Vertex — 400 mm arm, 12V/6W The VLED-20L is a reinforced LED lamp engineered for precise bench lighting in metalworking and inspection tasks, offering compact, low-energy illumination and flexible positioning for workshop use. Reinforced construction for everyday workshop use 400 mm articulated arm for precise positioning Low-energy 12V / 6W LED illumination Compact 1.2 kg body with mains 220V connection Precision illumination that improves inspection and assembly The compact LED module provides consistent, low-heat light with a 12V/6W rating, ensuring clear visibility of fine details without excessive power consumption. This concentrated illumination minimises shadows and glare during inspection or assembly, increasing throughput and reducing error rates. The lamp’s electrical design for 220V mains simplifies installation at standard workshop supply voltages, while the low wattage contributes to reduced operating costs. Such technical clarity supports efficient workflows in quality control and small-series production. Flexible positioning for ergonomic, time-saving working An articulated 400 mm arm and lightweight construction enable rapid adjustment of the light source to the required angle and distance, improving ergonomics at the bench. The reinforced mounting and balanced head deliver stable placement once set, reducing the need for frequent re-adjustment and helping operators maintain focus on the task. With a compact footprint and modest mass of 1.2 kg, the lamp can be integrated into crowded workstations or attached to inspection rigs where space and manoeuvrability are at a premium. Durable indoor design that matches workshop conditions Engineered for indoor workshop environments, the lamp carries an IP20 protection rating suitable for controlled, dry areas. The robust build quality and tested components from Vertex mean a predictable service life under normal workshop conditions, supporting continuous operation in production or repair settings. Delivered via Metav Werkzeuge, the product benefits from a distribution network that emphasises reliable supply and technical guidance, ensuring users receive consistent quality and documentation for integration into their setup. Choose the Vertex VLED-20L for dependable task lighting and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and order support Technical data SKU: VLED-20L GTIN: 4061905094491 Brand: Vertex Protection: IP 20 Light: 12V / 6W Power supply: 220V Arm length: 400 mm Weight: 1.2 kg Facts Arm length: 400 mm Weight: 1.2 kg LED output: 12V / 6W Supply voltage: 220V Protection class: IP20 Special features Reinforced construction (verstärkt) Suitable for indoor workshop use Compact and lightweight design eClass: 27110640 ETIM: EC001959 FAQ What supply voltage does the lamp require? The VLED-20L operates from a standard 220V mains supply while providing a low-voltage LED output of 12V/6W for the light source. Is the lamp suitable for precision inspection tasks? Yes; the focused 12V/6W LED and articulated 400 mm arm make the lamp well suited to detailed inspection and assembly work where targeted illumination is required. Can the lamp be used outdoors or in damp environments? No; the IP20 rating indicates protection for indoor, dry environments only and it is not rated for outdoor or high-humidity use. How heavy is the unit and how does that affect mounting? The lamp weighs 1.2 kg, a modest mass that allows for secure mounting on benches and racks without imposing excessive load on fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400mm Cover For Milling Table Slot, Anodised Aluminium, Fits 14mm Slot, Set Of 6 - Vertex
Combining hand‑anodised aluminium construction with a slim 9.9 mm profile and a 400 mm length, the VST-14 slot cover keeps router‑table slots tidy and protected; order the cover directly via Metav Werkzeuge or contact our consultants for fitment advice. VST-14 Router-table slot cover — hand‑anodised aluminium, 400 mm VST-14 is a slim, durable cover for router‑table slots designed to reduce debris ingress and improve workshop safety and cleanliness. Hand‑anodised aluminium construction Slim 9.9 mm profile for low clearance 400 mm length for standard tables Supplied as set for broad coverage Tidy worktops and safer operation from a slim insert A slim, precisely formed slot cover restores the working surface of a router table without raising cutter clearance. The 9.9 mm profile reduces the gap around cutters, limiting chip ejection and dust settlement while preserving access for adjustments. Manufactured from hand‑anodised aluminium, the insert provides a stable contact surface that resists everyday wear; the result is a neater workbench and fewer disturbances during machining, which contributes directly to smoother production cycles and predictable results. Consistent fit and practical handling for workshop workflows With a nominal length of 400 mm, the insert spans typical table openings and can be used to cover single or multiple slots when installed in sequence. The lightweight construction simplifies handling and replacement during tool changes and maintenance. Because the component is engineered for standard router‑table geometries, fitting is straightforward and the cover aligns reliably with the table slot, helping to maintain a constant work height and reducing interruptions caused by loose or improvised covers. Durable finish that lowers maintenance needs The hand‑anodised aluminium finish enhances surface hardness and provides enhanced corrosion resistance, which reduces the frequency of cleaning and replacement compared with untreated materials. Anodising creates a protective oxide layer that withstands light impacts and abrasive dust, keeping the visible surface tidy over time. For workshops seeking durable, low‑maintenance accessories, this finish translates into lower downtime and steady visual quality on the working surface. Compatibility and typical applications in the workshop Designed for use in router tables and similar benchtop machining stations, this slot cover is suitable where a narrow slot width is required and a flush working top is valued. The design accommodates common table configurations found in joinery and cabinetmaking shops, toolrooms, and educational workshops. Where dust control, safe access around rotating cutters and an uncluttered work area are priorities, the insert functions as a simple but effective engineering solution. Contact Metav Werkzeuge for advice on integrating the Vertex VST-14 into existing tables and to confirm compatibility with specific router installations; our Emmerich team provides expert specification support and reliable supply. Technical data SKU: VST-14 GTIN: 4061905090837 Manufacturer: Vertex Facts Length: 400 mm Height: 9.9 mm Weight: 0.5 kg Pieces per set: 6 Special features Material: hand‑anodised aluminium Suitable for slot width 14 mm Designed for router‑table slots Supplied as a set FAQ What slot width does this cover fit? The cover is suitable for a slot width of 14 mm and is designed specifically to match standard router‑table openings. Is the VST-14 resistant to corrosion and wear? Yes, the VST-14 uses a hand‑anodised aluminium finish that improves surface hardness and offers enhanced corrosion resistance for longer service life. Can the cover be used on any router table? The cover is intended for typical router‑table slots; compatibility should be confirmed against the table slot width and mounting arrangement before installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400mm Cover For Milling Table Slot, Anodised Aluminium, Fits 16mm Slot Width - Vertex
Take advantage of a durable, low-maintenance slot cover that delivers precise fit and reliable protection for router tables; the robust anodised aluminium construction and 400 mm length ensure stable coverage and long service life. Order the set directly via Metav Werkzeuge or consult the sales team for compatibility details. VST-16 – Vertex cover for router table slot, anodised aluminium, 400 mm The VST-16 is a 400 mm slot cover made from anodised aluminium, designed to close a 16 mm router table slot and reduce ingress of dust and chips during machining. Anodised aluminium construction Fits 16 mm slot width 400 mm length for broad coverage Supplied as a set of six Keep the workspace cleaner and machines running longer A dedicated slot cover prevents accumulation of dust and chips in the router table opening, reducing the need for frequent machine disassembly and lowering wear on moving parts. By limiting debris entry, the cover contributes to a tidier bench and more consistent machining results. The protective effect translates into measurable savings in maintenance time and fewer interruptions to production. Precision fit with corrosion-resistant material Engineered for a 16 mm slot width and a 400 mm length, the profile provides a snug fit that avoids rattling while allowing easy removal for tool changes. The anodised aluminium surface offers improved resistance to corrosion and light abrasion compared with untreated alloys, preserving appearance and function in workshop conditions. Supplied as a set of six, the package supports multiple workstations or provides immediate replacements to minimise downtime. Quick to install and straightforward to maintain The slim profile and modest 13.3 mm height allow fast retrofitting into standard router table slots without modification. At approximately 0.5 kg per unit, handling and alignment are simple, enabling swift exchange during routine cleaning. Routine maintenance is limited to occasional wiping and inspection, which keeps service intervals short and keeps the workflow uninterrupted. Contact Metav Werkzeuge in Emmerich to secure the anodised aluminium slot cover set and confirm compatibility with specific router tables; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VST-16 GTIN: 4061905091063 Set content: 6 pieces Facts Length: 400 mm Height: 13.3 mm Weight: 0.5 kg Suitable slot width: 16 mm Special features Material: anodised aluminium Surface finish: anodised Application: router table slot cover FAQ Is the slot cover compatible with all router tables? The VST-16 is intended for router tables with a 16 mm slot width; compatibility depends on slot geometry and table thickness. How is the cover supplied and how many pieces are included? The product is supplied as a set of six pieces, allowing use across multiple tables or spare replacements. What maintenance does the anodised aluminium finish require? Regular wiping to remove dust and light debris is sufficient; the anodised surface on the VST-16 reduces corrosion risk and requires no special treatment. Can the cover be trimmed to a different length? The VST-16 is supplied at 400 mm length; trimming is possible in principle but should be carried out with appropriate tools and care for the anodised finish. Does the cover affect fence or accessory mounting? When installed, the cover reduces ingress into the slot while maintaining the nominal gap; check fence clearance and accessory fit with the VST-16 in place before finalising setup. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400mm Cover For Milling Table Slot, Anodised Aluminium, Height 8mm, Set Of 6 - Vertex
Benefit from a durable cover that combines hard‑anodised aluminium, a precise fit for a 12 mm slot and a practical 400 mm length; supplied as a set of six for consistent workshop results. Order directly via Metav Werkzeuge or consult our advisors for specification support. VST-12 cover for router table slot — hard‑anodised aluminium, 400 mm (Vertex) A VST-12 slot cover designed to close a 12 mm milling table gap, offering a flush, wear‑resistant surface suitable for professional workshop tables. Hard‑anodised aluminium finish Precise fit for 12 mm slot 400 mm length for standard tables Supplied as a set of 6 Robust protection that keeps workflows uninterrupted The cover delivers a durable barrier where open router table slots can collect chips and wear workpieces. Manufactured from hard‑anodised aluminium, the component resists abrasion and maintains dimensional stability under normal workshop conditions. The solid construction reduces the need for frequent replacements and helps preserve tooling accuracy by preventing debris ingress. This reliability supports uninterrupted production and reduces downtime associated with slot wear or damage. Accurate fit for clean results and safer operation With a tailored fit for a 12 mm slot and a 400 mm length, this slot insert provides a neat, even surface across the table opening. The precise dimensions ensure minimal movement during routing tasks, contributing to repeatable setups and consistent surface finishes. By closing the gap effectively, the cover reduces the risk of small offcuts snagging on tools and helps maintain a safer working area without compromising accessibility for fence or guide adjustments. Easy integration and consistent supply for workshops Delivered as a set of 6, the covers allow a workshop to standardise table maintenance across multiple machines or to keep spares for rapid replacement. Their straightforward format simplifies inventory planning and helps reduce procurement complexity. Compatibility with common router table designs makes retrofitting uncomplicated, allowing production teams to implement the solution quickly and focus on machining tasks rather than bespoke adjustments. Material performance explained for informed decisions The hard‑anodised aluminium surface provides an anodic layer that increases hardness and corrosion resistance compared with untreated aluminium. For users unfamiliar with the treatment, this means improved scratch resistance and longer life in environments exposed to chips, dust and periodic coolant exposure. The component’s modest mass and stable geometry ensure it does not interfere with table levelling or fence alignment, preserving machining precision over repeated use. Contact Metav Werkzeuge for tailored advice on Vertex slot covers and ensure reliable supply from Emmerich for your workshop requirements Technical Data Article number: VST-12 GTIN: 4061905089862 Manufacturer: Vertex Facts Length: 400 mm Height: 8 mm Weight: 0.4 kg Pieces per set: 6 Special features Hard‑anodised aluminium Suitable for 12 mm slot width Supplied as set Brand: Vertex FAQ What slot width does this cover fit? The cover is designed for a 12 mm slot and is supplied under the Vertex SKU VST-12 for straightforward identification. How long is each cover? Each unit measures 400 mm in length, giving a continuous sealing surface for most standard routing table openings. What material is the cover made from? The VST-12 is manufactured from hard‑anodised aluminium, chosen for abrasion resistance and dimensional stability in workshop environments. Is the product supplied as single pieces or sets? The cover is supplied as a set of 6, allowing consistent replacement and simplified stock management for multiple tables. Will the cover affect table alignment or fence setup? The component’s low profile and precise dimensions are intended to maintain table geometry and not interfere with fence alignment when fitted correctly. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400mm Dowel Screw M24x400 Heat Treated 8.8, DIN 6379 - AMF
Take advantage of a standardised, high-strength fastening solution that combines conformity with DIN 6379, robust M24 threading and heat treatment to property class 8.8 for reliable joint integrity; order via Metav Werkzeuge or consult their technical advisers for specification support. AMF stud bolt DIN 6379 — M24 × 400 mm, property class 8.8 A AMF stud bolt DIN 6379 M24 x 400 mm, heat-treated to property class 8.8, designed for secure bolted connections in mechanical and structural assemblies Stud bolt to DIN 6379 standard Heat-treated to property class 8.8 M24 metric thread for high-strength fastening 400 mm overall length for deep assemblies Engineered for dependable, high-strength joints The stud is manufactured to the DIN 6379 specification, ensuring repeatable geometry and compatibility with standard M24 components. Heat treatment to property class 8.8 provides defined mechanical properties and improved fatigue resistance compared with untreated fasteners. These characteristics translate into consistent clamp force and reduced risk of connection loosening in demanding applications, supporting predictable maintenance intervals and reliable operational uptime. Dimensions and thread form that speed up assembly With an M24 metric thread and an overall length of 400 mm, the stud is suitable for deep fittings where standard-length fasteners are insufficient. The long engagement length enables secure thread engagement without extensions, while compatibility with standard M24 nuts and washers simplifies procurement and reduces the number of bespoke parts required. The result is a leaner assembly process with fewer handling steps and less downtime during installation. Proven quality and supply continuity for workshops Produced by a recognised industrial supplier and offered through Metav’s distribution, the fastener is intended for industrial and workshop environments where traceability and consistent quality matter. Sourcing via a supplier with a quality filter in Emmerich supports steady availability and batch consistency. The component’s specification and conformity to standards help maintain safety margins in structural and mechanical joints, offering long-term confidence in both new builds and retrofit projects. Contact Metav Werkzeuge for specialist advice on AMF stud bolts and to secure supply from the Emmerich warehouse — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and availability Technical data Article number: 4000603368NW Manufacturer: AMF Product type: Stud bolt Standard: DIN 6379 Designation: M24 x 400 mm, property class 8.8 Measurements Thread: M24 Overall length: 400 mm Width: 35 mm Materials & features Heat-treated to property class 8.8 Pack unit: 1 Additional note: Addition: b: 250 FAQ What does property class 8.8 mean for the stud bolt? Property class 8.8 indicates a heat-treated steel fastener with elevated mechanical properties; the AMF stud bolt in property class 8.8 is designed for higher tensile and yield strength than non-heat-treated equivalents, suitable for structural and mechanical load-bearing joints. Is this stud bolt compatible with standard M24 nuts and washers? Yes, the stud has an M24 metric thread and is designed to mate with standard M24 nuts and washers for conventional fastening arrangements. For which applications is the 400 mm overall length intended? The 400 mm overall length suits deep assemblies and situations where extended thread engagement is required, such as long flanges, stacked components or retrofits that exceed standard fastener lengths. Does the product conform to any recognised standard? The fastener complies with DIN 6379, providing standardised dimensions and tolerances for use in industrial and workshop applications. What information does the SKU 4000603368NW provide? SKU 4000603368NW uniquely identifies this AMF stud bolt variant (M24 x 400 mm, property class 8.8) for ordering and inventory tracking purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Dustproof Halogen Lamp 12V/20W 110V/220V, IP Dustproof - Vertex
Take advantage of the combination of a dustproof halogen lamp, a 400 mm adjustable arm and universal 110–220 V compatibility for consistent workshop illumination. Order the VHL-700FT directly via Metav Werkzeuge or ask our consultants if needed. VHL-700FT — Vertex halogen workshop lamp, dustproof with 400 mm arm A VHL-700FT halogen lamp designed for focused, durable workshop illumination suited to inspection and assembly tasks. Dustproof halogen design 12 V/20 W light output 400 mm adjustable arm 110–220 V compatibility Precise illumination for inspection and assembly The halogen lighthead delivers stable, high-contrast illumination ideal for tasks where visual clarity matters. The 12 V/20 W bulb produces a concentrated beam with a warm colour temperature that improves material contrast and reduces eye strain during detailed work. This stable light source supports repeatable visual inspection and manual assembly, helping to reduce errors and improve throughput. The lamp head is configured for directional control, allowing focused light exactly where it is needed. Built for workshop conditions and easy positioning A dustproof construction protects the unit in harsher workshop environments, extending service life and reducing maintenance cycles. The 400 mm adjustable arm offers practical reach and flexibility, enabling quick repositioning without complex adjustments. At a compact 1.7 kg, the unit remains manageable for bench use and reconfiguration across workstations while providing a robust feel appropriate for daily industrial use. Compatibility and integration with existing equipment Designed for broad electrical compatibility, the unit accepts 110 V/220 V mains, simplifying installation across different regions and supply setups. The straightforward electrical specification makes the lamp suitable for integration into standard workshop benches and inspection stations with minimal additional components. Built by a recognised manufacturer, the lamp combines proven components with clear technical parameters to support predictable system planning. Contact Metav Werkzeuge at our Emmerich hub for delivery coordination and compatibility advice on the VHL-700FT lamp Technical data Article number: VHL-700FT GTIN: 4061905090080 ECLASS: 27110334 Core specifications Arm length: 400 mm Weight: 1.7 kg Light: 12 V/20 W Mains voltage: 110 V/220 V Special features Dustproof construction Halogen light source Brand: Vertex FAQ How bright is the lamp and what type of light does it produce? The lamp uses a 12 V/20 W halogen bulb that provides warm, high-contrast illumination suited to detailed inspection and manual assembly with the VHL-700FT. Can the lamp be used on different mains voltages? Yes. The VHL-700FT accepts 110 V/220 V, allowing use across common mains supplies without additional transformers. What reach does the lamp offer for bench work? The unit features a 400 mm adjustable arm that enables precise positioning of the lighthead across a typical workbench area. Is the design suitable for dusty workshop environments? The VHL-700FT has a dustproof construction, designed to withstand dusty conditions and reduce maintenance needs in workshop settings. How heavy is the unit and is it easy to reposition? Weighing 1.7 kg, the lamp is compact and straightforward to reposition on benches or workstations while maintaining robust handling characteristics. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400mm Independent Four-Jaw Chuck, 4×M16 T‑slots, 550 rpm - Vertex
Take advantage of the combination of rigid 400 mm clamping, independent jaw adjustment and secure 4‑M16 mounting for consistent setup and reduced vibration in turning operations. Order the unit directly via Metav Werkzeuge or ask our consultants for tailored advice. VKC-16 Independent Four‑Jaw Chuck by Vertex — 400 mm, independent jaws The VKC-16 Independent Four‑Jaw Chuck offers individual jaw control for versatile clamping of eccentric or irregular workpieces in lathe and machining applications. Independent four‑jaw clamping system 400 mm nominal diameter Suitable up to 550 r.p.m. rotational speed 4 × M16 T‑slots for secure mounting Stable datum and high machining accuracy The independent jaw design and substantial mass deliver a stable datum for precision turning. By adjusting each jaw separately, the chuck centres irregular blanks without the need for soft jaws, reducing setup time and improving concentricity. The combination of independent jaws and a 400 mm nominal diameter supports larger components while the solid construction limits flex under cutting forces, resulting in better repeatability and fewer rework cycles. Flexible fixturing for diverse parts Equipped with 4‑M16 T‑slots, the chuck enables straightforward fixation to a wide range of adaptors and angle plates. This mounting concept provides flexibility for bespoke setups and makes the chuck suitable for alternating production runs where quick reconfiguration is required. The T‑slot arrangement also allows secure attachment of external jaw systems or work supports, promoting stable clamping for non‑standard geometries. Controlled rotational limits and dynamic behaviour Designed with a rated rotational capability of 550 r.p.m., the chuck balances performance and safety for common turning operations. The unit’s mass (approx. 56 kg) contributes to stable rotational inertia, helping to damp vibrations during heavy cuts. Observing the specified 550 r.p.m. limit preserves bearing life and maintains machining accuracy; the robust build means the chuck is appropriate where steady, low‑vibration turning is essential. Practical setup, adjustment and maintenance Individual jaw feeds allow precise radial corrections and simplified centring of eccentric workpieces, cutting inspection and adjustment time. Routine maintenance focuses on lubrication of the jaw guides and periodic inspection of the mounting interfaces to preserve repeatability. For integration into existing tool routines, the independent jaw concept reduces the need for custom jaw sets on short runs, streamlining workshop logistics and saving fixture costs. For expert selection or to arrange supply of this Vertex VKC‑16 independent four‑jaw chuck, contact Metav Werkzeuge in Emmerich for direct technical advice and delivery coordination. Technical Data Article number: VKC-16 GTIN: 4061905086687 Manufacturer: Vertex Core data Diameter: 400 mm Max. speed: 550 r.p.m. Weight: 56 kg T‑slot: 4 × M16 Special features Independent jaw operation Four‑jaw chuck design 4‑M16 mounting interface Suitable for eccentric and irregular workpieces FAQ Can the chuck hold irregularly shaped workpieces reliably? Yes. The Vertex VKC‑16 independent four‑jaw chuck permits individual jaw adjustment, enabling secure and concentric clamping of irregular shapes without bespoke jaw sets. What mounting interface does the chuck use? Mounting is via four T‑slots: 4 × M16, allowing attachment to adaptors, angle plates or dedicated fixtures. What is the maximum safe rotational speed? The chuck is rated for up to 550 r.p.m.; staying within this limit maintains bearings and balance for accurate turning. Is the chuck suitable for heavy workpieces? The unit’s mass (approx. 56 kg) and 400 mm diameter contribute to stable clamping for larger components; verify machine spindle and tooling limits for compatibility. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
400mm Mini Cross Table 75mm Height, 400x100 Platform - SAIM
Compact footprint and bench-top suitability combined with a low overall height and light weight make this stage straightforward to fit into existing workstations; the SAIM-400XY mini cross slide table is therefore a practical choice for small-scale positioning tasks — order through Metav Werkzeuge or consult our advisors for detailed specifications. SAIM-400XY Mini cross slide table — 400 × 100 mm platform, 75 mm overall height The SAIM-400XY is a compact cross slide table designed for precise manual positioning on bench-top setups and small machines. Compact 400 × 100 mm platform Low overall height of 75 mm Lightweight at 10 kg SAIM mini cross slide design Accurate positioning in a compact footprint The mini cross slide table delivers straightforward, repeatable motion in a very small package. With a 400 × 100 mm platform and a 75 mm overall height, the stage is tailored to situations where space is limited but controlled linear movement is required. The compact layout simplifies integration into inspection stations, small milling fixtures, or measuring benches while the low profile reduces centre-of-gravity effects on lighter assemblies. The combination of a small footprint and clear mechanical layout supports efficient workflow planning and reliable part handling. Easy handling and straightforward installation Weighing just 10 kg, the unit is light enough for simple relocation yet substantial enough for stable bench-top use. The design is suited to quick mounting and basic alignment without complex fixtures, making it well adapted for laboratories, toolrooms and prototyping benches. The mechanical guidance is aimed at manual control and incremental adjustment, which helps minimise setup time and keeps maintenance uncomplicated. This balance of bench-top integration and manageable mass reduces downtime and keeps secondary handling costs low. Practical uses and suited applications The stage is appropriate for tasks that demand fine lateral adjustment and repeatable positioning: component inspection, small-part machining, alignment procedures and prototype assembly benefit from the manual positioning capability. As a compact positioning stage, it complements measuring equipment and small machine tools where a full-size table would be disproportionate. The simple, space-efficient design supports modular workstations and aids process standardisation in workshops with varied, small-batch tasks. For specification advice or to request a tailored supply recommendation for the SAIM-400XY mini cross slide table, contact Metav Werkzeuge — our consultants are available to review integration options and compatibility with existing setups. Technical Data Article number: SAIM-400XY GTIN: 4061905082375 Manufacturer: SAIM Facts Platform dimensions: 400 × 100 mm Overall height: 75 mm Weight: 10 kg eClass: 21041714 Special features Designation: Kreuztisch Mini Gallery image: saim_draw_x.jpg Technical drawing: saim-150x-technische-zeichnung.jpg FAQ What are the exact platform dimensions? The platform measures 400 × 100 mm, providing a compact surface for small parts and fixtures with the SAIM-400XY mini cross slide table. How high is the stage and what is its mass? Overall height is 75 mm and the unit weighs 10 kg, enabling low-profile bench integration with modest handling requirements. Is the unit intended for bench-top use or machine mounting? The SAIM-400XY is designed primarily for bench-top and small-station applications where manual, repeatable lateral adjustment is needed. Which tasks suit this cross slide table? Typical uses include component inspection, precision alignment, prototyping support and small-part machining where a compact positioning stage is preferable. How is the product identified for ordering and cataloguing? Refer to the article number SAIM-400XY and GTIN 4061905082375 when specifying this mini cross slide table. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Stud Bolt M20 Grade 8.8 Heat Treated, DIN 6379 - AMF
Take advantage of a combination of robust tensile performance, standardised DIN conformity and long reach for dependable bolted joints in machinery and structural assemblies; order the required stud bolts directly via Metav Werkzeuge or contact our consultants for selection support. Stud bolt DIN 6379 M20x400 mm, tempered to 8.8 (AMF) A Stud bolt DIN 6379 M20x400 mm engineered for secure threaded connections in industrial machinery and structural applications, supplied as a single piece and finished to property class 8.8 Stud bolt DIN 6379, M20×400 mm Tempered to property class 8.8 High tensile strength for heavy-duty use Supplied as single piece, SKU 4000833288NW Reliable joining for heavy-duty assemblies The Stud bolt DIN 6379 M20x400 mm provides a straightforward, standardised solution for long-span threaded connections. Compliance with DIN 6379 ensures consistent thread geometry and dimensional accuracy, which simplifies assembly with matching nuts and threaded components. The long 400 mm overall length allows for clamping thick flanges or multiple component stacks without resorting to special fasteners, while the M20 thread delivers a proven interface for high-load bolting tasks. This results in fewer part numbers to manage and a predictable bolted-joint behaviour under operational loads. Material treatment and what property class 8.8 delivers Tempering to property class 8.8 denotes a heat-treated steel fastener with elevated mechanical performance compared with untreated carbon steels. The tempering process increases yield and tensile capacity and improves resistance to plastic deformation under load, which is particularly relevant where repetitive or dynamic forces occur. Specifying a tempered fastener reduces the likelihood of elongation or loss of clamp force in service. For customers less familiar with fastener grades, property class 8.8 is commonly chosen where a balance of strength and ductility is required for industrial applications. Practical installation and suitable applications The threaded stud is designed for use where a through-bolt or double-ended stud is preferable: repair work, machinery assembly, gearbox mounting and structural clamping are typical use cases. With an M20 thread, standard nuts and washers can be paired to achieve the required clamping force; torquing must follow the assembly specifications appropriate to property class 8.8 components to ensure joint integrity. The single-piece supply simplifies inventory and traceability, and the long reach of the component removes the need for extensions or splicing in most configurations. For advice on selecting AMF stud bolts or for procurement assistance with tempered M20×400 mm studs, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 and our specialists will support the specification and delivery Technical data Article number / SKU: 4000833288NW Brand: AMF Standard: DIN 6379 Facts Thread: M20 Overall length: 400 mm Width: 27 mm Packaging unit: 1 Special features Tempered to property class 8.8 Product type: Stud bolt Addition: b: 250 FAQ What does the DIN 6379 designation mean for the component? DIN 6379 refers to the German standard that defines dimensions and geometry for this type of stud bolt, ensuring compatibility with mating parts and interchangeability in industrial assemblies. Is the M20×400 stud ready to install with standard nuts? Yes, the M20 thread on this stud bolt matches standard M20 nuts and washers; the long 400 mm length accommodates thick assemblies or multiple stacked components. How is the product supplied and how can it be identified? The AMF stud bolt is supplied as a single piece and can be referenced by SKU 4000833288NW for ordering and inventory purposes. What are the benefits of the tempering to property class 8.8? Tempering to property class 8.8 enhances the fastener's strength and resistance to permanent deformation, making it suitable for heavy-duty and cyclic load applications where reliable clamp retention is required. Can the stud bolt be used for structural applications? The stud's conformity to DIN 6379 and its 8.8 tempering make it suitable for many structural and machinery applications; specific use should follow project engineering standards and torque specifications to ensure joint safety. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com