Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
38mm Transverse Slot Arbor With 16mm Collet, Hollow Shank, Coolant Ports, DIN 69893 Form A - TECWERK
Take advantage of the combination of enhanced stability, integrated coolant routing and precise HSK‑A63 toolholding for reliable milling performance; order the arbor directly via Metav Werkzeuge or consult our specialists for technical clarification. Arbor for cross‑slot cutters — TECWERK, HSK‑A63, Ø38 mm, 100 mm projection The arbor for cross‑slot cutters is designed for HSK‑A63 spindles and for mounting cutter heads and cutters with a DIN 1880 cross slot, offering stable, coolant‑ready toolholding for production and jobbing shops Enlarged flange diameter for improved rigidity Hollow shank taper to DIN 69893 Form A Front coolant channel drilling for directed cooling Accepts DIN 1880 cross‑slot cutter heads Increased rigidity for stable milling results The arbor is engineered to deliver consistent concentricity and elevated stiffness thanks to an enlarged flange diameter combined with a Ø38 mm body. Increased flange mass reduces bending under load, which lowers vibration and improves surface finish in slotting and face‑milling tasks. For workshops seeking reproducible cutting results, this results in fewer rejects and reduced rework; the mechanical design supports higher radial stability without additional adaptations to the spindle. Precise HSK‑A63 compatibility and secure clamping Built to DIN 69893 Form A, the toolholder features the HSK‑A63 interface that is widely used for high‑accuracy, high‑speed machining. The hollow shank taper ensures correct seating and repeatable positioning, while the clamping diameter 16 mm enables direct acceptance of shank‑mounted components designed to DIN 1880. This results in short set‑up times and reliable torque transmission, making the arbor suitable for series production as well as single‑piece finishing where positional accuracy is essential. Integrated coolant provision for longer tool life The face of the arbor is supplied with additional coolant channel drilling, allowing directed coolant delivery to the cutting zone when combined with appropriate supply lines. Internal coolant routing via the hollow shank minimises thermal build‑up at the cutter interface and enhances chip evacuation. The result is improved tool life and more consistent machining, particularly in operations that generate heat or demand continuous material removal. Practical application and user advantages This toolholder is intended for the reception of cutter heads and cutters with a DIN 1880 cross slot, offering a straightforward retrofit into machining centres equipped with HSK‑A spindles. The design simplifies mounting of cross‑slot tooling, reduces balancing effort compared with ad‑hoc adaptors and supports higher feed rates through increased structural rigidity. Combined with Metav’s distribution and advisory services, this arbor is a practical choice for workshops wishing to standardise on robust, DIN‑compliant toolholding. Contact Metav Werkzeuge for tailored advice on HSK‑A63 toolholding and rapid supply from Emmerich—benefit from our precision expertise and stock availability Technical data Article number: 2000833876NW Manufacturer: TECWERK Facts Standard: DIN 69893 Form A Interface: HSK‑A63 Body diameter: 38 mm Clamping diameter: 16 mm Projection length: 100 mm L1: 17 mm Special features Enlarged flange diameter for improved rigidity Hollow shank taper according to DIN 69893 Form A Additional coolant channel drilling at the face Designed to receive cutter heads and cutters with DIN 1880 cross slot FAQ What spindle interface does this arbor use? The arbor uses an HSK‑A63 interface compliant with DIN 69893 Form A to ensure accurate seating and repeatable positioning. Can the arbor accept cutter heads with a DIN 1880 cross slot? Yes, the toolholder is specifically designed for the reception of cutter heads and cutters with a DIN 1880 cross slot. How does the coolant routing improve machining? Integrated coolant channel drilling at the face directs coolant to the cutting edge, reducing temperature, aiding chip evacuation and extending tool life. What are the key dimensions to consider for setup? Important dimensions include a body diameter of 38 mm, a clamping diameter of 16 mm, and a 100 mm projection length, which determine fixture clearance and tool reach. Is the arbor suitable for high‑speed machining? The hollow shank and HSK‑A63 connection support accurate centring and dynamic balance, making the arbor suitable for demanding machining conditions when correctly specified. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
38mm Vertical Clamp 750N Closing Force, Massive Hold Arm, Zinc-Plated - Kukamet
Take advantage of the combination of a galvanised finish, a massive holding arm and compact 38 mm reach to ensure secure, repeatable clamping in fixtures and jigs. Order the component directly via Metav Werkzeuge or contact their consultants for application-specific advice. Vertikalspanner 213 — Vertical lever clamp, galvanised, 38 mm arm (Kukamet) The Vertikalspanner 213 is a precision vertical lever clamp intended for secure workholding in jigs, small assemblies and repetitive fixture operations. Compact 38 mm arm for tight fixtures Galvanised finish for corrosion resistance Robust holding arm design for long life 1,000 N nominal holding force for secure clamping Consistent clamping force for repeatable production The vertical lever design provides a clear distinction between actuation and retention: the specified 750 N actuation or pressing force engages the mechanism, while the rated 1,000 N holding force maintains the workpiece securely. This separation of forces reduces the risk of slippage under load and contributes to predictable process outcomes in repetitive tasks. The 38 mm arm length gives a compact reach that is particularly useful where space is restricted, allowing reliable engagement without compromising operator access or fixture layout. Built for durability and simple integration A galvanised surface finish enhances corrosion resistance for industrial environments, while the massive holding arm increases resistance to wear and mechanical stress during frequent cycles. At just 0.151 kg, the unit is lightweight enough to be integrated into portable jigs yet robust in structure. The angle-foot mounting offers a stable attachment to plates and fixture bases, enabling straightforward installation into existing setups and reducing time spent on fixture adaptation. Practical benefits that improve workflow efficiency As a lever clamp in the Kukamet range, this device reduces setup time and supports quick clamping and unclamping, which speeds up throughput on repetitive operations. The clear mechanical action and compact footprint minimise the likelihood of incorrect engagement, contributing to consistent assembly quality. Where reliable retention and fast cycle rates matter, this clamp combines simple mechanics with effective holding characteristics to support smoother production runs. Contact Metav Werkzeuge for tailored advice and to secure supply of the Kukamet Vertikalspanner 213 directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 213-1-D-C1 GTIN: 8680731505849 Manufacturer: Kukamet Model: 213 Category: Spanner Facts Arm length: 38 mm Max pressing force: 750 N Max holding force: 1,000 N Weight: 0.151 kg Special features Material: galvanised Mounting: angle-foot Massive holding arm Category: lever clamp FAQ What holding force does this clamp provide? The Vertikalspanner 213 delivers a holding force of 1,000 N; the actuation or pressing force is 750 N for engagement, offering secure retention under typical fixture loads. How is the clamp mounted to a fixture? Mounting uses an angle-foot arrangement that secures the clamp to plates or fixture bases; the compact design facilitates integration into jigs without major modifications. Is the finish suitable for workshop environments? Yes, the galvanised finish on the Vertikalspanner 213 provides corrosion resistance appropriate for most workshop and industrial settings, extending service life. Can this clamp speed up repetitive assembly tasks? The lever clamp design supports fast clamping and unclamping cycles; the consistent mechanical action of the Kukamet unit helps reduce setup time and improve repeatability. What is the exact arm reach of the clamp? The clamping arm has a reach of 38 mm, making it suitable for tight fixture spaces where compact engagement is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
38mm Vertical Clamp With Massive Holding Arm And Safety Lock, 750N Pressure / 1000N Hold - Kukamet
Take advantage of the galvanised construction, 750 N clamping force and a heavy-duty 38 mm arm for reliable, repeatable workholding; order directly via Metav Werkzeuge or consult the team for specification support. Vertical clamp 213 by Kukamet — galvanised vertical lever clamp with safety lock Vertical clamp 213 is a compact lever-operated vertical clamp intended for secure workholding in workshop and industrial clamping applications. Robust 38 mm holding arm Galvanised corrosion protection 750 N clamping force Integrated safety lock Reliable clamping for repeatable production The vertical lever design delivers a consistent clamping force of 750 N and a holding capacity rated at 1000 N, providing measurable, repeatable restraint for production and assembly tasks. The distinction between clamping and holding values ensures that temporary actuation and sustained retention are both quantified: the specified figures enable process planners to calculate safety margins and cycle capability. This engineered certainty supports efficient fixturing and reduces rework, making the component suitable for repetitive workflows where predictable force values are required. Built to last in workshop conditions Constructed from galvanised steel, the device resists corrosion in workshop environments and retains functional integrity over prolonged use. A heavy-duty 38 mm arm provides a rigid contact point that minimises deflection under load, while the compact overall footprint keeps bench space free for other operations. The angled foot mounting simplifies integration into existing jigs and fixtures, enabling stable attachment without extensive modification. These design choices combine to reduce maintenance intervals and ensure continuous operation in routine industrial settings. Safe, simple integration and operation An integrated safety lock prevents unintended release during handling or vibration, improving operator confidence and process safety. The clamp’s lever action offers rapid engagement and release, shortening cycle times and supporting lean production aims. At a weight of only 0.15 kg the component is easy to position and replace, yet delivers the mechanical performance expected from a larger assembly. Technical teams benefit from clear, domain-specific data — such as force ratings and mounting type — which facilitates specification and quality control in procurement documentation. Choose the Kukamet 213 for dependable vertical clamping and contact Metav Werkzeuge for technical advice and reliable supply from Emmerich. Technical data SKU: 213-1-D-L-C1 GTIN: 8682843520314 Model: 213 Category: Spanner ECLASS: 21041717 ETIM: EC011973 Core specifications Arm diameter: 38 mm Clamping force (max): 750 N Holding force (max): 1000 N Weight: 0.15 kg Materials & features Material: Galvanised Mounting: Angled foot Heavy-duty holding arm Safety locking mechanism Compact lever clamp design FAQ What maximum clamping and holding forces are specified for the clamp? The clamp specifies a maximum clamping force of 750 N and a holding force of 1000 N, which are intended to guide fixture design and safety margins for production use. Is the clamp suitable for outdoor or humid workshop environments? The galvanised finish provides improved corrosion resistance, making the clamp appropriate for humid workshop conditions; regular inspection is still recommended for outdoor exposure. How is the clamp mounted and what does the angled foot offer? Mounting is via an angled foot (Winkelfuß), which allows secure attachment to fixtures or benches and facilitates stable load transfer without complex brackets. Does the device include a safety feature to prevent accidental release? Yes, the clamp is fitted with an integrated safety lock that secures the lever in the engaged position to prevent unintended opening under vibration or during handling. Which SKU and manufacturer identify this product for procurement? The product is sold as SKU 213-1-D-L-C1 and is manufactured by Kukamet as the Vertical clamp 213. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
38mm Vertical Clamp With Massive Holding Arm, 750N Press Force, 1000N Holding Force - Kukamet
Benefit from the combination of a massive holding arm, a compact 38 mm arm and dependable clamping power for consistent fixture performance. Order the vertical clamp 213 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 213 by Kukamet — compact design with robust holding arm Vertical clamp 213 is a vertical toggle clamp designed for secure holding and repeatable positioning in limited spaces, suitable for jigs, fixtures and light production tasks. Massive holding arm 38 mm Max. holding force 1,000 N Clamping force up to 750 N Right‑angle base for secure mounting Robust clamping where space is tight The massive holding arm provides stability in confined set-ups while the compact footprint keeps the clamp unobtrusive on the workbench. A 38 mm arm gives a favourable contact surface that helps distribute load and reduces workpiece deformation during clamping. The blackened finish offers a basic layer of corrosion resistance, ensuring that the fixture retains its appearance and function in standard workshop environments. This combination of robustness and compactness supports reliable repeatability for small-batch production and assembly tasks. Measured clamping power for reproducible results Specified forces ensure predictable clamping behaviour: a 1,000 N holding force and up to 750 N clamping force enable secure fixation of parts during machining, assembly or inspection. Newton values describe the mechanical force directly; for practical orientation, these figures suit light to medium clamping demands where consistent pressure and positional stability are required. The clamp’s mechanism converts operator input into repeatable holding force, reducing set-up variability and helping to maintain production quality. Fast fitting and maintenance-friendly design The right‑angle mounting foot simplifies integration into existing fixtures and tooling plates, allowing the clamp to be bolted down rigidly for direct load transfer. At just 0.151 kg, the component is lightweight yet sturdy, easing handling during jig assembly and replacement. The straightforward geometry of the toggle mechanism permits quick cleaning and inspection; wear parts can be monitored visually and replaced when required, contributing to predictable maintenance intervals and lower downtime in day-to-day use. For tailored clamping solutions from Kukamet and reliable supply from Metav Werkzeuge, contact Metav Werkzeuge for a bespoke quotation or technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B213-1-D-C1 GTIN: 8682843522400 Designation: Vertical clamp 213 Facts Arm length: 38 mm Weight: 0.151 kg Clamping force: 750 N Holding force: 1,000 N eClass: 21041717 ETIM: EC011973 Special features Blackened finish Massive holding arm (massiver_arm) Right‑angle foot mounting (Winkelfuß) Brand: Kukamet FAQ What maximum holding force does this clamp provide? The Kukamet vertical clamp 213 offers a maximum holding force of 1,000 N as specified for secure part retention. Which clamping force can be expected during operation? Clamping force is rated up to 750 N, giving consistent pressure suitable for light to medium tasks with reproducible results. How is the clamp mounted to a fixture? The clamp is fitted using its right‑angle base, allowing bolted attachment to tooling plates or jig frames for rigid installation. What finish does the clamp have and how does it affect corrosion resistance? The component has a blackened finish, which provides basic surface protection and a durable appearance under normal workshop conditions. Is the clamp suitable for production jigs and assembly fixtures? Yes, the compact footprint, robust arm and repeatable force make the clamp well suited to jigs, fixtures and light production assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
38mm Workpiece Driver For Vise Compatibility Ø20-Ø33mm - Vertex
Benefit from a compact, precision-focused design with a 38 mm diameter and proven compatibility with calipers Ø20–Ø33 mm for consistent, repeatable handling. Order the workpiece driver directly via Metav Werkzeuge or ask our consultants if needed. Workpiece Driver VDC-30 — compact workpiece carrier, Ø38, caliper-compatible (Vertex) Workpiece Driver VDC-30 for reliable clamping and handling of round components during inspection and small-batch machining, suitable for use with calipers Ø20–Ø33 mm. Diameter 38 mm precision fit Compatible with Ø20–Ø33 mm calipers Lightweight at 0.2 kg Vertex quality, SKU VDC-30 Accurate positioning for inspection and measurement The VDC-30 is engineered for precision in measurement workflows, offering a standard Ø38 interface that provides stable seating for cylindrical parts. When paired with calipers designed for Ø20–Ø33 mm, the device ensures repeatable positioning and reduces measurement variance; this supports faster quality checks and fewer re-measurements. The construction focuses on straightforward integration into inspection benches and gauging setups, translating the nominal dimensions into reliable, comparable results across batches. Low mass improves handling and cycle times At just 0.2 kg, the component is notably lightweight, which lowers inertia during pick-and-place operations and manual handling. The reduced mass makes it easier to manoeuvre small parts and limits stress on rotary fixtures or feed mechanisms, contributing to smoother cycle times without compromising stability. For workshops where changeover speed and delicate part protection matter, the low weight is a practical advantage that helps maintain throughput while safeguarding component surfaces. Straightforward compatibility and workshop integration Designed within clamping technology contexts, this workpiece carrier emphasises simple compatibility rather than proprietary complexity: the defined diameter and caliper range enable quick matching with existing gauges and fixtures. Traceability is supported by the visible SKU and GTIN for inventory control and replacements. Delivered as a compact element for inspection or small-batch production, it complements broader tooling and measuring assortments and facilitates a modular approach to workshop equipment planning. For dependable precision and seamless integration, choose the Vertex VDC-30 and contact Metav Werkzeuge for personalised advice or to arrange supply via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: VDC-30 GTIN: 4061905085857 Manufacturer: Vertex Facts Diameter: 38 mm Suitable for calipers: Ø20–Ø33 mm Weight: 0.2 kg eClass: 21029190 Special features Brand: Vertex SKU: VDC-30 Image available (thumbnail) Intended for clamping and handling of round components FAQ What diameter of component does this workpiece carrier accept? The workpiece carrier accepts components that fit a 38 mm interface; compatibility with measuring and handling tools is based on that nominal diameter. Can this item be used with common calipers? Yes. The device is specified for use with calipers sized Ø20–Ø33 mm, enabling straightforward measurement workflows with standard calipers. How heavy is the unit and what does that mean for handling? With a weight of 0.2 kg, the VDC-30 offers low inertia for easier manual handling and reduced load on fixtures during automated operations. Is this product traceable for inventory and reorders? Traceability is supported via SKU VDC-30 and GTIN 4061905085857, which simplifies inventory management and reordering processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
38x140x86mm Step Block Adjustable Support, Hardened Steel - Vertex
Take advantage of compact dimensions and reliable fixture height control to streamline set-up times and improve repeatability on the shop floor; order the Step Block directly via Metav Werkzeuge or ask the consultants if additional technical information is needed. Step Block – Compact clamping step for precise height control, 38 × 140 × 86 mm by Vertex The Step Block is a compact clamping aid for precise fixture height adjustment and repeatable setup tasks in workshop and light production environments. Compact 38 × 140 × 86 mm format Precise step height for repeatable set-ups Robust design for workshop applications Faster, more reliable height setting for fixtures The Step Block offers a simple, mechanical solution for consistent fixture height control, reducing the need for iterative shimming and measurement. With clear, fixed step geometry, technicians achieve repeatability across repeated setups, shortening machine downtime and avoiding costly trial cuts. The compact footprint and clear geometry make it suitable for tight benches and multi-station arrangements, improving throughput without complex equipment. The emphasis on measurable, repeatable adjustment directly supports rational decision-making on the shop floor and promotes efficient process design. Practical compatibility with standard clamping systems Designed as a general-purpose clamping accessory, this step block integrates smoothly with common workshop vises, T-slot fixtures and modular clamping kits. The geometry supports firm contact and stable seating, so setups remain secure during machining cycles. As a low-complexity workholding element, it simplifies changeover procedures and complements existing clamping hardware, thereby enabling faster job changeovers and predictable results. The compact dimensions help when planning fixture layouts, allowing more flexible positioning within jigs and on machine tables. Clear benefits for both everyday and precision tasks Beyond immediate time savings, the block contributes to consistent quality control by standardising the starting height for inspection and machining operations. Repeatable setups reduce measurement variance and support downstream quality assurance. The straightforward design requires minimal training to deploy, making it suitable for both experienced machinists and apprentices. For procurement and workshop managers, the device delivers an accessible route to better process stability without extensive fixture redesign. For reliable, space‑saving clamping with Vertex quality, contact Metav Werkzeuge to discuss how the Step Block fits into existing fixtures or to request a tailored supply recommendation from our Emmerich-based specialists. Technical Data SKU: 5235 GTIN: 4061905093692 Manufacturer: Vertex Machinery Works Co., Ltd. Facts eCl@ss: 21170107 Dimensions: 38 × 140 × 86 mm Special features Product type: Step block Intended use: Fixture height adjustment and clamping aid Images available: technical drawing and detail photographs FAQ What is the primary purpose of this Step Block? The Step Block serves as a clamping aid to establish repeatable fixture heights and support consistent workpiece positioning during machining and inspection. What are the exact external dimensions? Dimensions are 38 × 140 × 86 mm. Is the block compatible with standard vices and T-slot fixtures? Yes, the geometry is intended to pair with common workshop clamping systems for stable seating and reliable setup. Which manufacturer produces this clamping accessory? The product is supplied by Vertex Machinery Works Co., Ltd.; the step block is listed under SKU 5235. Are visual references available for planning setups? Technical drawing and detailed photographs are provided to assist in fixture planning and integration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
38x59x39mm Step Block, Precision Machined Stop - Vertex
Take advantage of the combination of a compact footprint and clear product identification for efficient fixture setups; order the part directly via Metav Werkzeuge or ask our consultants if needed. Step Block — compact 38 x 59 x 39 mm clamping element by Vertex The Step Block is a compact clamping element designed for precise workpiece positioning in fixture and jig assemblies Compact footprint: 38 x 59 x 39 mm Simple step geometry for repeatable positioning Suitable for fixture and clamping applications Identified by SKU 5215 and GTIN 4061905091520 Space-saving design that supports efficient workflows The compact footprint of this clamping element, at 38 x 59 x 39 mm, makes it suitable for confined setups and dense fixture arrangements. Its small size allows more components to be mounted within the same workspace, supporting lean production principles and optimised machine table use. In practice, the reduced spatial demand contributes to faster job changeovers and better utilisation of milling, drilling or inspection benches, thereby improving overall throughput without compromising accessibility. Precise step geometry for consistent positioning The engineered step form delivers precision and repeatability in locating operations. By providing a defined contact surface and a predictable datum, the component simplifies the alignment of workpieces during clamping and machining. This clear datum function reduces the need for iterative adjustments, which in turn decreases setup time and lowers the risk of misalignment-related rework. For production environments where consistent part location is essential, the component supports tighter process control and reduced scrap. Integrates with standard fixtures and modular jigs Designed as a practical element for clamping technology, the Step Block (SKU 5215) fits into common fixture concepts and modular tooling systems. Its geometry makes it compatible with a wide range of clamps and supports used in everyday workshop operations. The standardised form factor assists in maintaining uniformity across multiple stations, easing spare-part management and simplifying the construction of repeatable workholding solutions that serve both one-off and batch production tasks. Traceability and documentation for reliable procurement Classification and documentation support efficient inventory and procurement processes: ECLASS 21170107 is assigned and imagery includes a technical drawing alongside detail and main photos. The part is traceable via GTIN 4061905091520, which facilitates automated ordering and stock-keeping. These identifiers aid logistics and quality assurance workflows, allowing clear communication between purchasing, storekeeping and production planning without ambiguity. For compact and reliable positioning choose Vertex components like the Step Block — contact Metav Werkzeuge in Emmerich for expert advice and ordering via email info@metav-werkzeuge.com or by phone +49 2822 7131930 Technical data Article number: 5215 GTIN: 4061905091520 Designation: Step Block Dimensions: 38 x 59 x 39 mm Manufacturer: Vertex Facts ECLASS: 21170107 SKU: 5215 GTIN: 4061905091520 Special features Assets: technical drawing, detail image, main image Category: Vertex Material: not specified FAQ What are the exact external dimensions of the part? The component measures 38 x 59 x 39 mm, as stated for the Step Block (SKU 5215). Is a technical drawing available for design integration? Yes, a technical drawing is provided among the assets and supports integration into fixture layouts. Can this part be used in modular jigs and clamping systems? The design is intended for use in fixture and clamping applications and is compatible with common modular setups. How can the part be identified in procurement systems? Identification is possible via SKU 5215 and GTIN 4061905091520 for clear inventory tracking. Under which classification is this item listed? The item is classified as ECLASS 21170107 for standards-based categorisation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
38x97x61mm Step Block Precision Machining Fixture, Steel - Vertex
Take advantage of a compact, precisely stepped support that simplifies workholding and reduces setup time. With clear dimensions of 38 x 97 x 61 mm and proven Vertex manufacturing, this step block delivers consistent positioning and reliable integration into standard clamping arrangements — order directly via Metav Werkzeuge or consult our specialists for application advice. Step Block — Vertex clamping step block, compact 38 x 97 x 61 mm The Step Block is a precision workpiece support designed for stepped positioning and stable clamping in machine-table and fixture setups. Compact 38 x 97 x 61 mm Stepped profile for accurate support Vertex manufacturing quality Suitable for machine table clamping Faster set-up thanks to compact stepped support The compact, stepped design provides a straightforward indexing surface that reduces repeated measuring and alignment. By combining a clearly defined footprint with a stepped contact face, the workpiece support reduces the number of adjustment steps required during vice or fixture setup. The direct consequence is faster clamping cycles and fewer interruptions in the production flow, which supports efficient machining schedules and better machine utilisation. The 38 x 97 x 61 mm footprint is ideal where bench space or table room is limited. Repeatable positioning that improves process consistency A precisely formed step profile ensures repeatable positioning and stable contact points. This repeatability reduces variability between setups, contributing to consistent part quality and less scrap. For operations that rely on accurate reference heights or stepped supports for multi-level clamping, the solid geometry of the block delivers a tangible improvement in process reliability. The component’s geometry makes it suitable as a fixed reference in jigs, fixtures and dedicated clamping configurations. Practical design for workshop integration and low upkeep The simple construction minimises required maintenance and inspection: keep clean, inspect contact surfaces for wear and reinstall as needed. Its straightforward form factor makes it compatible with common workholding layouts and allows rapid replacement or reconfiguration within modular clamping systems. Backed by Vertex’s manufacturing standards, the element is intended as a practical, durable addition to workshop tooling sets, helping maintain uptime and predictable performance. For procurement or technical clarification on Vertex clamping components, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 5225 GTIN: 4061905093418 ECLASS: 21170107 Brand: Vertex Dimensions Dimensions: 38 x 97 x 61 mm Features Product name: Step Block SKU: 5225 FAQ What is the primary purpose of the Step Block? The Step Block by Vertex is intended as a stepped workpiece support for precise positioning and stable clamping in machine-table and fixture applications. What are the exact dimensions of this clamping element? The Step Block measures 38 x 97 x 61 mm and is designed to occupy a small footprint while providing a defined step surface. Is this block suitable for modular clamping systems? The stepped geometry of the Vertex Step Block permits integration into common clamping arrangements and modular fixture setups where a defined height reference is required. How should the Step Block be maintained to ensure reliable performance? Regular cleaning of contact faces and visual inspection for wear are recommended; the block’s simple design facilitates quick replacement within workshop tooling configurations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3mm 5C Collet High Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of high-precision clamping with a 3 mm nominal diameter and 0.02 mm repeatability, combined with an 87 mm overall length that supports stable toolholding in serial production. Order the collet directly via Metav Werkzeuge or ask our consultants if needed. 5C-3 Collet — 3 mm diameter, 87 mm length (Vertex) The 5C-3 Collet is a precision clamping element for 5C toolholders, engineered for consistent tool retention in machining and grinding applications. 3 mm diameter, 0.02 mm accuracy 87 mm overall length, sturdy construction Standard 5C interface, easy integration Improved process reliability through measurable precision A compact clamping solution with 3 mm nominal capacity and 0.02 mm repeatability reduces machining variation and lowers the need for rework. The combination of tight tolerance and repeatable clamping ensures that the held tool maintains its cutting geometry over series runs, which directly benefits part quality and process stability. Emphasis on precision and accuracy supports predictable cycle times and reliable measurement feedback in quality control. Designed for seamless integration into 5C toolholding systems The standard 5C interface and an 87 mm overall length allow straightforward installation into existing collet chucks and adapters, helping maintain machine uptime. The nominal dimensions facilitate correct stick-out and balance, which preserves spindle dynamics and reduces unwanted vibration during operation. Compatibility with conventional toolholding equipment simplifies logistics and shortens changeover sequences, supporting efficient production workflows. Consistent clamping for steady machining performance A robust construction delivers consistent clamping force, which contributes to longer tool life and steadier surface finishes. The modest weight 0.21 kg helps maintain spindle balance while providing sufficient mass for secure retention. Where stability and repeatability matter, the component’s mechanical characteristics support repeatable set-ups and reduced inspection interventions, aiding throughput in small to medium production batches. Practical handling and upkeep for workshop routines Routine inspection is straightforward because the geometry is standardised and quick to measure; visual checks and a simple runout test verify ongoing serviceability. Basic cleaning and careful storage prevent contamination and help retain the specified 0.02 mm performance over time. For customers seeking confirmation on fitment or advised set-up parameters, technical guidance is available to ensure correct application and avoid unnecessary downtime. Contact Metav Werkzeuge for tailored advice on selecting the right Vertex 5C-3 collet for production toolholding and to discuss compatibility with existing chucks Technical Data SKU: 5C-3 GTIN: 4061905084591 Manufacturer: Vertex ECLASS: 21041712 Facts Diameter: 3 mm Repeatability / accuracy: 0.02 mm Length: 87 mm Weight: 0.21 kg Special features 5C standard interface Precision clamping element Suitable for integration into standard toolholding systems FAQ Is the 5C-3 Collet compatible with standard 5C chucks? Yes. The 5C-3 Collet uses the standard 5C interface and is designed for installation in conventional 5C collet chucks and adapters. What level of clamping accuracy can be expected? The component provides a 0.02 mm repeatability specification, ensuring consistent tool positioning for precision machining tasks. Which tool shank diameter is the collet intended for? The collet is specified for a 3 mm nominal tool shank and is optimised for repeatable clamping at this diameter. How does the collet affect spindle balance and vibration? With an overall length of 87 mm and a weight of 0.21 kg, the collet contributes minimal imbalance when used within normal toolholder parameters, supporting reduced vibration and stable cutting conditions. Can the Vertex 5C-3 Collet be inspected easily in a workshop? Yes. The collet’s standard geometry allows quick visual inspection and simple runout checks to confirm it continues to meet the stated 0.02 mm performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3mm ER 25 Collet, 34mm Length, Clamping Range 3mm, 5 µm Runout - TECWERK
Precision and compatibility combine in this TECWERK ER 25 collet: full‑length clamping and a 5 µm runout rating ensure steady, reproducible toolholding for small‑diameter tooling. Benefit from DIN 6499‑B conformity and the ability to bridge undersized tools (nominal −1.0 mm). Order the collet directly via Metav Werkzeuge or ask the consultants for tailored advice. ER 25 Collet 430 E – 3 mm clamping diameter (TECWERK) The ER 25 Collet 430 E is a DIN‑compliant collet designed for ER‑type holders, providing secure, full‑length clamping of 3 mm tools for precision machining applications. DIN 6499-B compatibility Full-length clamping for secure grip Runout and repeatability: 5 µm Clamping diameter 3 mm, length 34 mm Consistent precision for demanding toolholding Designed to meet DIN 6499‑B, this collet delivers repeatable runout of 5 µm, which translates into more accurate cuts and improved surface finishes. The full‑length clamping mechanism grips the tool along its entire clamping length and also accepts bracing on the leading chamfer, reducing axial play and vibration. For production runs where consistency matters, the technical specification—d = 3 mm, L = 34 mm, D = 26 mm—supports predictable performance and helps maintain tool life by limiting undesired deflection. Faster setups and stable production processes Compatibility with standard ER chucks eliminates the need for intermediate sizes and simplifies tooling changes, so set‑up times are reduced and throughput increases. The collet’s ability to bridge smaller diameters (clamping range: nominal −1.0 mm) allows secure gripping of slightly undersized tools without additional adapters. This functional flexibility supports leaner inventories of clamping accessories and fewer interruptions on the shopfloor, delivering a measurable efficiency advantage for workshops and toolrooms. Suitable for precision shops and general machining The ER 25 collet is suited to tasks that require reliable clamping of small‑diameter cutters and drills in milling and machining centres. By ensuring low runout and uniform grip, the component supports higher tolerances and repeatability in series production as well as prototyping. Where accurate concentricity and repeatability are required, the collet’s combination of ER system compatibility and defined dimensional data ensures predictable integration into existing clamping setups. For secure, repeatable clamping of small‑diameter tooling, contact Metav Werkzeuge to discuss the TECWERK ER 25 collet (SKU 2000832924NW) and arrange procurement or technical advice; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 2000832924NW Type: ER 25 Brand: TECWERK Product type: ER collet Packing unit: 1 Dimensions & accuracy Clamping diameter (d): 3 mm Length (L): 34 mm Outside diameter (D): 26 mm Runout / repeatability: 5 µm Clamping range bridging: nominal −1.0 mm Compatibility & features DIN 6499‑B standard Fits ER collet chucks Full‑length clamping; tools can be clamped on the chamfer No intermediate sizes required FAQ What clamping diameter does the collet support? The collet supports a 3 mm clamping diameter and bridges undersized tools up to nominal −1.0 mm for secure retention. Is this collet compatible with standard ER chucks? Yes. The design conforms to DIN 6499‑B and fits ER‑type collet chucks used in milling and machining setups. How precise is the runout of the collet? The TECWERK ER 25 collet is specified with a runout and repeatability of 5 µm, ensuring consistent concentricity for precision work. Can tools be clamped on the chamfer with this collet? Yes. The collet allows full‑length clamping and can also retain tools when supported on the leading chamfer, enhancing versatility. What are the main dimensions to consider when integrating this collet? Key dimensions are clamping diameter 3 mm, length 34 mm and outside diameter 26 mm; these values support correct selection for ER 25 holders. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm ER11 Collet Precision Clamping, L18mm, Runout 5µm - TECWERK
Reliable, compact clamping for small‑diameter tooling: precise ER 11 performance with a 3 mm bore and 5 µm runout, plus a bridging capacity of nominal minus 0.5 mm — order directly via Metav Werkzeuge or ask our consultants for application advice. TECWERK ER 11 collet – 3 mm bore, 5 µm runout A TECWERK ER 11 collet for secure clamping of small cutting tools and rotary instruments in ER collet chucks, suitable for workshop and light production use. ER 11 collet for 3 mm nominal diameter Conforms to DIN 6499‑B standard Holds tools along entire clamping length Runout and repeatability 5 µm Accuracy that reduces rework and keeps processes stable The collet is manufactured to meet DIN 6499‑B, delivering consistent concentricity and minimal deviation. With a specified runout and repeatability of 5 µm, the component supports high‑quality finishing and reduces scrap rates in serial operations. The documented bridging capacity (nominal minus 0.5 mm) allows machining slightly undersized shanks without intermediate adaptors, simplifying tool selection and reducing changeover complexity while maintaining the expected positional precision. Stable grip along the full clamping length for safer machining Raised clamping contact across the full clamping length ensures that small‑diameter tools benefit from better support, lowering the risk of deflection and premature wear. The design also permits clamping on the lead‑in chamfer, enabling secure seating even when tools present a guiding bevel. As a result, cycle stability in milling or drilling tasks improves and tool life is extended, supporting predictable production throughput without frequent manual adjustments. Compact dimensions for tight setups and micro‑tooling Compact geometry makes the item a strong choice where space is restricted. With L: 18 mm, d: 3 mm and D: 11.5 mm, the collet fits typical ER 11 systems while allowing close tool spacing and reduced interference in crowded toolholders. This small footprint benefits workshops that run high‑density fixtures or require frequent tool changes, making it simpler to configure heads and spindles for micromachining tasks without compromising clamping security. Practical compatibility and supply reliability for everyday use Designed to fit standard ER collet chucks, the component eliminates the need for intermediate sizes and is suitable for many common materials and operations where small shank tools are used. Supplied via Metav’s distribution, customers gain the advantage of a dependable stock flow and a quality filter in Europe that keeps consistent items available for workshop and light industrial users. For clarification on fitment or special applications, eMail info@metav-werkzeuge.com or call +49 2822 7131930 for quick guidance. For tailored clamping solutions from TECWERK and reliable delivery from Metav Werkzeuge, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machines and tooling setups Technical Data Article number: 2000832855NW Type: ER 11 Product: ER collet Label: Spannzange Typ ER 11/4008 E Spann‑D.3mm TECWERK Manufacturer: TECWERK Core specifications Clamping range: 3 mm Runout / repeatability: 5 µm Length (L): 18 mm Inner diameter (d): 3 mm Outer diameter (D): 11.5 mm Bridging capacity: nominal minus 0.5 mm Special features Conforms to DIN 6499‑B Fits ER collet chucks No intermediate sizes required Tools held along whole clamping length Can be clamped on the guiding chamfer FAQ What clamping range does this collet cover? The ER 11 collet (Spannzange Typ ER 11/4008 E, SKU 2000832855NW) is specified for a 3 mm nominal clamping range and a bridging capacity of nominal minus 0.5 mm. Is the collet compatible with standard ER chucks? Yes, the collet is designed to conform to DIN 6499‑B and fits standard ER collet chucks of the ER 11 family. What runout performance can be expected? The collet offers runout and repeatability performance around 5 µm, suitable for precision tasks with small‑diameter tooling. Can tools be clamped on the lead‑in chamfer? The design permits clamping on the lead‑in chamfer, allowing secure seating even when a guiding bevel is present on the tool shank. Which dimensions define the collet's form factor? Key dimensions are L: 18 mm, d: 3 mm and D: 11.5 mm, which support compact toolholder arrangements. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm ER16 Collet Precision Hold, 5µm Runout, 27mm Length - TECWERK
Take advantage of the proven combination of precision clamping, DIN 6499‑B compatibility and compact dimensions for consistent machining results; order the collet directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK ER 16 collet 426 E — clamping Ø 3 mm The TECWERK ER 16 collet 426 E (3 mm) is a compact precision clamping sleeve for ER collet chucks, designed to hold tools securely over the full clamping length for repeatable machining operations DIN 6499‑B compatibility Whole-length tool clamping Runout and repeatability 5 µm Compact L 27 mm, clamping Ø 3 mm Predictable accuracy for everyday machining The collet delivers a guaranteed runout and repeatability of 5 µm, a specification that translates directly into reduced scrap rates and tighter tolerances in series production. Runout refers to the radial deviation of the tool tip during rotation; limiting this value means the cutter or drill follows the intended path more closely. The design holds the tool along its entire clamping length, which reduces bending and improves concentricity compared with short-grip alternatives. For production environments that prioritise process stability, this level of geometric control shortens setup iterations and supports consistent quality. Simple integration with standard ER toolholding systems Built to DIN 6499‑B standards, the collet fits ER‑type chucks without the need for intermediate adaptors. The nominal clamping diameter of 3 mm and the specified bridging capability (nominal minus 1.0 mm) allow a small tolerance window to be compensated without changing the clamping element. Dimensions such as L: 27 mm, d: 3 mm and D: 17 mm make the component compact yet practical for tool stations with limited axial clearance. This compatibility reduces procurement friction and accelerates machine changeovers in mixed‑tool operations. Robust form factor for repeatable handling and uptime The compact construction, together with the full‑length gripping principle, enhances mechanical stability under cutting loads and facilitates predictable tool life. The option to clamp on the lead chamfer (guide bevel) increases versatility when working with short or stepped shanks. Because the collet secures the tool along more of its length, clamping forces are distributed more evenly, reducing deformation and minimising rework. For workshops and production lines seeking reliable repeatability, this component contributes to lower downtime and steadier throughput. Contact Metav Werkzeuge today for tailored application advice and to source TECWERK ER 16 collets from our Emmerich hub — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability for specific machines and toolsets. Technical data Article number: 2000832914NW Manufacturer: TECWERK Product type: ER collet Product label: Spannzange Typ ER 16/426 E Spann-D.3mm TECWERK Clamping range: 3 Packaging unit: 1 Core dimensions L: 27 mm d: 3 mm D: 17 mm Runout and repeatability: 5 µm Clamping diameter bridging: nominal minus 1.0 mm Special features Compatibility: DIN 6499‑B Holds tools over the whole clamping length Usable on the guide chamfer (lead bevel) No intermediate sizes required FAQ What is the declared runout for this ER 16 collet? The declared runout and repeatability for the TECWERK ER 16 collet (SKU 2000832914NW) is 5 µm, ensuring high concentricity for cutting tools. Can this collet be used in any ER 16 chuck? Yes, the collet is made to DIN 6499‑B and is compatible with standard ER 16 collet chucks without modifications. What clamping diameter does the collet accept? The collet is specified for a 3 mm clamping diameter with a bridging allowance of nominal minus 1.0 mm to accommodate minor size deviations. Is it suitable for short tool shanks or stepped tools? The design allows clamping on the lead chamfer (guide bevel) and along the full clamping length, making it suitable for short or stepped shanks where secure engagement is needed. What are the main dimensions to check for machine fitment? Key dimensions are L: 27 mm, d: 3 mm, and D: 17 mm; these determine axial clearance and bore fit in the chuck. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm ER32 Collet 40mm Clamping Length 5µm Runout Nominal Minus 1.0mm Span - TECWERK
Take advantage of high clamping accuracy and broad compatibility for reliable tool holding in production. With DIN 6499‑B compliance and a guaranteed 5 µm runout/repeatability, this collet delivers consistent results while reducing set‑up time; order via Metav Werkzeuge or consult the technical team for tailored advice. ER 32/470 E Collet (ER 32) — 3 mm Clamping Diameter, TECWERK The ER 32/470 E Collet is an ER 32 clamping collet engineered for precise holding of 3 mm tool shanks in ER collet chucks, compliant with DIN 6499‑B for industrial machining. Compliant with DIN 6499‑B standard Fits ER collet chucks ER 32 Full‑length tool clamping for stability Runout and repeatability ≤ 5 µm Achieve consistent machining with low runout and repeatability The primary advantage of this collet is its controlled concentricity: compliance with DIN 6499‑B and a specified runout/repeatability of 5 µm ensure that the tool axis remains stable during rotation. This technical precision reduces vibration and tool wear, which in turn improves surface finish and process reliability. For workshops aiming to minimise rejects and rework, the measurable concentricity is a concrete performance parameter that supports predictable machining outcomes. Flexible compatibility reduces set‑up time on the shop floor Designed to mate directly with ER 32 collet chucks, the component removes the need for intermediate adapters or special sizes. Tools are held along the entire clamping length, and the collet can be seated on the lead chamfer, enabling secure gripping even when minor variations in shank length occur. The straightforward fitment shortens tool changes and supports efficient production cycles without compromising clamping integrity. Practical dimensions and clamping bridge for adaptable use The collet’s dimensions — L: 40 mm, D: 33 mm, d: 3 mm — define a compact yet robust profile suitable for many standard toolholders. The clamping bridge is specified as nominal minus 1.0 mm, which means the collet can compensate for a small undersize in the tool shank while maintaining clamping force; this increases usable tolerance and reduces the need for exact re‑grinding of tools. Such dimensional clarity aids selection and inventory planning in technical procurement. Robust holding behaviour that supports daily workshop demands Because tools are gripped over the whole clamping length, axial and radial forces are distributed more evenly than with partial clamping, improving stability under load. The ER 32 design from TECWERK offers a balance of rigidity and ease of use that is particularly well suited to milling, drilling and finishing operations where repeatable accuracy matters. For industrial and trade workshops seeking dependable clamping components, this collet contributes to consistent throughput and tool life. For reliable, high‑precision toolholding choose the TECWERK ER 32/470 E Collet and contact Metav Werkzeuge for stock information, application advice and immediate technical support — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 2000832939NW Model: Spannzange Typ ER 32/470 E Spann‑D.3mm TECWERK Type: ER 32 Product type: Spannzange ER Manufacturer: TECWERK Packaging unit: 1 Facts Clamping diameter: 3 mm L: 40 mm d: 3 mm D: 33 mm Runout/repeatability: 5 µm Clamping bridge: nominal minus 1.0 mm Special features Complies with DIN 6499‑B Fits ER collet chucks (ER 32) No intermediate sizes required Tools held along full clamping length Can be clamped on the lead chamfer FAQ What runout tolerance can be expected from this collet? The specified runout and repeatability for the TECWERK ER 32/470 E Collet is 5 µm, which supports precise machining and consistent surface quality. Is this collet compatible with standard ER 32 chucks? Yes, the collet is designed to fit ER 32 collet chucks and follows DIN 6499‑B, so no special adapters are required for standard holders. How does the clamping bridge specification affect tool selection? The clamping bridge of nominal minus 1.0 mm allows the collet to accommodate slightly undersized shanks while maintaining secure clamping, increasing flexibility when tools are marginally undersize. Can the tool be gripped on the lead chamfer? The design permits clamping on the lead chamfer and holds tools over the entire clamping length, improving stability for shorter shanks or when axial positioning is critical. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3mm Vertical Clamp With Angle Base, Max Clamping Force 2,500 N, Max Thrust 1,400 N - AMF
Take advantage of the combination of compact design, high holding performance and easy integration for reliable fixture setups; the vertical clamp delivers a maximum holding force of 2,500 N and a clamping force of 1,400 N, supplied with an angled foot and an M8 x 45 pressure screw. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp No. 6803, Size 3 – Angled foot (AMF) A Vertical clamp No. 6803 engineered for secure workholding in machining and fixture assemblies, supplied with an angled foot for flexible mounting. High holding force 2,500 N Maximum clamping force 1,400 N Angled foot for versatile mounting Includes M8 x 45 pressure screw Secure clamping power that improves process reliability The clamp offers robust holding performance, with a rated holding force of 2,500 N and a maximum clamping force of 1,400 N, ensuring components remain stable during cutting, drilling and light milling operations. These figures translate into fewer re-clamps and fewer rejected parts, which supports higher first-pass yield and steadier throughput. The integrated pressure screw (M8 x 45) provides consistent actuation force for repeatable set-ups, while the standardised Size 3 footprint simplifies replacement in existing fixtures. Flexible mounting and compact footprint for tighter fixtures Equipped with an angled foot, the device enables alternative mounting orientations where vertical space or access is restricted. The compact dimensions and standardised attachment points allow the unit to be positioned close to the workpiece without obstructing tools, reducing setup times and improving access for operators. The angled base design supports versatile clamping geometries in jigs and modular fixturing systems, increasing layout options on small and medium-sized workbenches. Fast integration into workshop workflows Designed for industrial and trade environments, the vertical clamp integrates into common fixture plates and modular tooling with minimal adjustment. The simple mechanical construction reduces maintenance needs and keeps downtime low; the pressure screw and mounting points follow familiar standards to ease retrofitting. By delivering consistent clamping force and rapid installation, the clamp contributes to shorter cycle planning and greater operational predictability on the shop floor. Suitable applications and compatibility The clamp is intended for general fixturing duties in metalworking and assembly contexts where reliable vertical holding is required. Typical applications include small-batch machining, fixture prototyping and repetitive assembly stations. Its Size 3 specification and compact geometry make it particularly suited to workshops and production lines that prioritise adaptable, space-efficient clamping solutions rather than large, fixed vices. For tailored fixturing recommendations or to place an order for the AMF vertical clamp No. 6803, contact Metav Werkzeuge — specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with integration and application details Technical data Article number: 4123590130NW Type: 6803 Product: Vertical clamp, Size 3, angled foot Manufacturer: AMF Facts Max clamping force: 1,400 N Max holding force: 2,500 N Size: 3 Packaging unit: 1 Pressure screw: M8 x 45 Angle a: 105° H: 71 mm H1: 223 mm L1: 111 mm Special features Angled foot for flexible mounting Standardised Size 3 dimensions Compact footprint for tight fixtures Repeatable clamping with M8 x 45 pressure screw FAQ What maximum forces can the clamp handle? The vertical clamp delivers a maximum clamping force of 1,400 N and a holding force up to 2,500 N, suitable for secure fixturing in many machining tasks. Is the angled foot suitable for horizontal plates? Yes, the angled foot provides alternative mounting angles and is designed to fit on standard fixture plates, enabling compact and adaptable placement. Which pressure screw is supplied with the clamp? The unit is supplied with an M8 x 45 pressure screw as standard to ensure consistent actuation and repeatable clamping behaviour. Can this clamp be used in modular jig systems? The Size 3 standardised dimensions make the clamp compatible with many modular fixturing systems and straightforward to integrate into existing jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3R Blade Accessory Set for VCF Deburring And Chamfering Machine, 10 Pieces - Vertex
Reliable replacement blades that combine precise 3R cutting geometry, direct compatibility with the VCF bevel and deburring machine and a ten-piece set for uninterrupted operation; order the VCF-500R-3R directly via Metav Werkzeuge or consult our specialists if required. VCF-500R-3R replacement blade set for VCF bevel and deburring machine — Vertex 3R cutting blades A set of VCF-500R-3R replacement 3R blades designed for precision chamfering and deburring on Vertex VCF systems, suited to workshop and production environments Precision 3R cutting geometry Compatible with VCF bevel machines Ten blades per set for continuous use Vertex quality and workshop reliability Consistent chamfer quality that speeds production The 3R blade geometry is engineered to deliver repeatable precision chamfers and burr removal, reducing rework and ensuring consistent edge preparation across batches. Installed in the Vertex VCF system, the cutting profile maintains dimensional uniformity, which shortens downstream processing time. This performance translates into measurable efficiency gains on the shop floor and supports reliable part handling during assembly or finishing. Reduced downtime through straightforward replacement Supplied as a ten-piece set, the blades enable planned maintenance cycles and minimise machine idle time. The compact replacement parts are exchangeable without complex adjustments, allowing quick restoration of cutting performance and consistent output. For production lines that require continuous operation, the ready stock of replacement inserts helps avoid delays and supports predictable throughput rates. Workshop-ready specification and trusted supply chain Manufactured by Vertex, these replacement blades are specified for the VCF bevel and deburring machine and delivered as a matched spare part to maintain original system performance. Sourcing via Metav Werkzeuge provides access to inventory managed from Emmerich, backed by decades of precision expertise and a broad product range that reduces procurement complexity. The combined assurance of Vertex manufacturing and Metav distribution promotes long-term availability and traceable quality control. Contact Metav Werkzeuge in Emmerich to secure the correct Vertex VCF-500R-3R blade set and ensure uninterrupted chamfering performance — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise order handling Technical data SKU: VCF-500R-3R GTIN: 4061905088353 Article name: Zubehör für Anfas- und Entgratmaschine VCF Contents: 3R Klinge Data Pieces per set: 10 Eclass: 21049248 Special features Brand: Vertex Compatible with VCF bevel and deburring machine Category: Zubehör FAQ What does the VCF-500R-3R set contain? The VCF-500R-3R set contains 3R blades supplied as a ten-piece set intended as replacement cutting inserts for the Vertex VCF bevel and deburring machine. Is the blade set compatible with other Vertex VCF models? Compatibility is specified for the VCF bevel and deburring machine series; the VCF-500R-3R is designed to match the original Vertex mounting and cutting geometry. How does the 3R geometry affect part quality? The 3R cutting geometry on the VCF-500R-3R provides consistent chamfer profiles and effective burr removal, supporting repeatable part quality and reduced finishing steps. Can the blades be stocked for continuous production? Yes, the ten-piece configuration of the VCF-500R-3R supports scheduled replacement and helps maintain continuous operation by reducing the need for emergency orders. Where can these replacement blades be sourced? Replacement VCF-500R-3R blades are available via Metav Werkzeuge and are supplied as original Vertex spare parts to preserve system performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3x Prisms 10°/15°/30° + 6x Angles 0.5°–5° Precision Angle And Prism Set - Vertex
Benefit from a compact reference set that combines precise angle coverage, quick inspection workflows and a robust workshop-ready design; the combination ensures consistent alignment checks and shorter set-up times. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. AB163 Precision Angle and Prism Set — Vertex 9-piece angle and prism set with fine angle blocks The AB163 Precision Angle and Prism Set provides a ready-to-use reference for comparative angle measurement and optical alignment tasks across workshop metrology and toolmaking applications. Complete 9-piece set for angle inspection High-precision prisms: 10°, 15°, 30° Fine angle blocks from 0.5° to 5° Faster, more reliable angle verification for everyday metrology This set is designed to reduce inspection time by offering a coherent selection of reference elements: prisms for optical alignment and angle blocks for direct mechanical comparison. The organised combination of reference angles eliminates repeated set changes, improving repeatability in comparative checks. For workshop engineers and quality technicians, the result is fewer measurement steps and a clearer traceability path during first-off and set-up inspections. Practical benefits for toolrooms and assembly stations Delivered as a compact kit, the components enable immediate use at gauges, comparators and inspection tables. The mix of medium-angle prisms (10°, 15°, 30°) and small-step angle blocks (0.5°–5°) supports both coarse alignment and precise angular adjustments, making the set suitable for valve seats, fixture set-up and optical squaring. The selection reduces the need for multiple single-purpose tools, streamlining workflows and saving bench space. Simple handling with measurable process advantages The clear allocation of angles aids documentation and quick selection during inspection routines, which helps maintain consistent process parameters and reduces rework. As a reference kit from Vertex, the set is appropriate for repeat verification tasks and comparative measurements where a stable set of known angles improves control over assembly tolerances. Compatibility with standard inspection practices ensures easy integration into existing quality procedures. Contact Metav Werkzeuge in Emmerich for application guidance on the Vertex AB163 Precision Angle and Prism Set — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: AB163 GTIN: 4061905083815 Manufacturer: Vertex Pieces: 9 Weight: 2 kg Prisms: 10°, 15°, 30° Angle blocks: 0.5°, 1°, 2°, 3°, 4°, 5° Set type: Precision angle and prism set Application: Comparative angle measurement, optical alignment Intended for: Workshop metrology, toolrooms, inspection benches FAQ What is included in the set? The set contains three prisms (10°, 15°, 30°) and six angle blocks (0.5°, 1°, 2°, 3°, 4°, 5°) as supplied with the AB163 Precision Angle and Prism Set from Vertex. Can the set be used for optical squaring and alignment? Yes; the combination of prisms and angle blocks is suitable for optical squaring, alignment checks and comparative angle verification in metrology operations. Is the AB163 suitable for bench inspection and production set-up? The AB163 kit is intended for both bench inspection and production set-up tasks where repeatable reference angles speed up set-up and reduce adjustment iterations. How does this kit improve measurement repeatability? A fixed selection of known reference angles reduces tool changes and variation in set-up procedures, improving repeatability during comparative inspections with the Vertex AB163 set. Which trades and applications benefit most from this set? Toolmakers, quality technicians and workshop engineers performing angle checks, fixture alignment or optical inspection will find the set particularly useful. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
3x3x3" Angle Plate, High-Strength Cast Steel, 0.01mm Accuracy, 1.2kg - Vertex
Take advantage of precision 0.01, high-strength cast steel construction and a compact 3×3×3" footprint to secure fast, repeatable setups and reduce rework. Order the Angle plate directly via Metav Werkzeuge or request advice from our consultants for application-specific recommendations. Vertex VR-33 Angle Plate — high-strength cast steel, precision 0.01 The VR-33 Angle Plate is a compact, precision 90° clamping plate designed for fixturing and inspection tasks in machine shops and metrology benches High-strength cast steel construction Compact 3×3×3" size for tight fixtures Precision tolerance 0.01 for reliable setups Robust 1.2 kg mass for stable clamping Engineered precision for dependable measurement and machining results High repeatability is the primary advantage of a precision angle plate in inspection and set-up workflows. With a specified accuracy 0.01, the component provides a measurable reduction in alignment error during squaring and gauging tasks. This level of control shortens setup times by avoiding iterative adjustments and supports consistent part quality across runs. The design translates into fewer scrapped components and a predictable production output, making the device a practical choice when tight tolerances are required. Durable construction that secures workpieces and resists wear Constructed from high-strength cast steel, the plate combines rigidity with damping mass to resist vibration and maintain datum integrity under clamping loads. The substantial 1.2 kg mass contributes to stability during milling, drilling or inspection operations, reducing the tendency for micro-movements that can affect tolerances. The material choice also offers long-term wear resistance in workshop environments, so the component remains a reliable datum over repeated cycles and prolonged use. Space-saving design for flexible integration on benches and fixtures A compact 3×3×3" envelope enables installation on busy workbenches and inside fixtures where space is limited, while still providing a true 90° reference. The compact form factor simplifies integration with existing clamping systems and reduces obstruction of toolpaths and measurement probes. Where multiple reference surfaces are required, the small footprint allows several plates to be deployed together for modular fixturing without sacrificing access or visibility. This makes the plate suitable for small-batch inspection, prototype work and tight-fixture machining. Discuss application requirements with Metav Werkzeuge in Emmerich and arrange supply or tailored advice for the VR-33 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VR-33 GTIN: 4061905089701 ECLASS: 21170130 Facts Dimensions: 3×3×3" Weight: 1.2 kg Accuracy: 0.01 Special features Material: high-strength cast steel Brand: Vertex Product type: angle plate FAQ What accuracy can be expected from this angle plate? The listed accuracy for the VR-33 angle plate is 0.01, providing a precise 90° reference suitable for tight-tolerance inspection and set-up tasks. Is the plate suitable for use on a milling machine table? Yes, the cast steel construction and 1.2 kg mass of the Vertex angle plate provide the stability required for light to moderate machining set-ups and for use as a fixed datum during milling operations. How compact is the design and where does it fit best? With a 3×3×3" footprint the plate fits comfortably on inspection benches, inside fixtures and on crowded workstations where space is at a premium. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
4-1/2x3x3-1/2" Angle Vise High-Strength Cast Steel, 1.3kg - Vertex
Taking advantage of a robust, high-strength cast steel construction and a compact 4-1/2 x 3 x 3-1/2 in footprint, this workholding solution delivers consistent right-angle stability for routine machining and inspection setups; order directly via Metav Werkzeuge or consult our specialists for application guidance. VR-45 Right-angle angle plate by Vertex — high-strength cast steel, compact size The VR-45 serves as a compact angle plate for precision right-angle workholding and repeatable clamping tasks in workshop and inspection environments. Robust high‑strength cast steel construction Compact 4-1/2 x 3 x 3-1/2 inch footprint Weighs only 1.3 kg for easy positioning Precision right-angle workholding Accurate right-angle clamping for repeatable results A stable right-angle reference is essential for repeatable machining and measurement. The angle plate’s geometry provides a consistent datum that reduces alignment iterations and shortens setup time, which increases throughput and lowers scrap rates. The inherent stiffness of the design ensures that forces introduced during clamping or light machining do not translate into measurable movement, so fixtures and gauges remain reliable over repeated use. Compact footprint that suits bench and machine setups With its compact dimensions and modest mass, the plate integrates easily into both bench-top inspection rigs and machine-tool vice setups. The small footprint allows close placement to other fixtures and instruments without crowding the work area, while the 1.3 kg weight makes manual repositioning straightforward when reconfiguring jigs. This balance of portability and stability supports flexible workflows in small-batch production and maintenance operations. Durable construction to reduce lifetime maintenance Manufactured from high-strength cast steel, the component combines rigidity with favourable vibration-damping properties compared with lighter materials. Cast steel resists deformation under clamping loads and maintains surface integrity during prolonged use, reducing the need for reconditioning. The material choice supports long service intervals and predictable performance, contributing to lower total cost of ownership for measurement and machining fixtures. Designed for straightforward integration into workholding systems The geometry and mass distribution of the angle plate make it suitable as a reliable reference in a variety of tasks, from marking out and drill setups to visual inspection aids. The compact, rigid form facilitates quick alignment and clamping with standard workshop accessories, while the manufacturer’s industrial pedigree ensures compatibility with professional workflows. The VR-45 is therefore a practical choice where compact workholding and sustained accuracy are required. For procurement or technical advice on the Vertex VR-45 angle plate, contact Metav Werkzeuge for tailored recommendations and supply from our Emmerich facility Technical data Article number: VR-45 GTIN: 4061905092312 EClass: 21020601 Manufacturer: Vertex Facts Dimensions: 4-1/2 x 3 x 3-1/2 in Weight: 1.3 kg Material & features Material: high-strength cast steel Application: right-angle workholding Brand: Vertex FAQ Is the angle plate suitable for light machining operations? The VR-45 angle plate by Vertex is intended primarily for clamping and inspection tasks; its high-strength cast steel construction tolerates light cutting forces but is optimised for stable referencing rather than heavy material removal. Can the plate be clamped directly in a vice or mounted to a fixture? The compact form and mass of the VR-45 allow secure clamping in a suitable vice or attachment to existing fixtures for repeatable positioning in both bench and machine contexts. What are the exact dimensions and weight of the angle plate? Dimensions are 4-1/2 x 3 x 3-1/2 in and the component weighs 1.3 kg, making it easy to handle while providing a stable reference surface. How does the material choice affect long-term use? Manufactured from high-strength cast steel, the angle plate offers enhanced stiffness and damping; this reduces deformation under load and supports consistent precision over extended service life. Is the VR-45 suitable for use in inspection rigs and measurement benches? Yes. The geometry and stability of the VR-45 make it well suited as a right-angle reference in inspection rigs and precision benches where repeatable alignment matters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
4-Jaw independent chuck plain back
Technische Daten: Bezeichnung: Vierbackenfutter VHM Durchmesser: 100 mm bis 200 mm Gewicht: 3,5 kg - 905 kg T-Nut: 4-M10 - 8-M20 Geschwindigkeit: 1100r.p.m. bis 850r.p.m. Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
4.5 kN Push Rod Clamp Horizontal Foot Zinc-Plated Cast Body 16mm Piston - Kukamet
Benefit from the combination of high clamping force, a corrosion-resistant galvanised cast body and compact weight for a reliable, smooth production flow; order the 535 push-rod clamp directly via Metav Werkzeuge or consult our specialists if necessary. 535 Push-rod clamp — horizontal foot mounting, 4,500 N max clamping force (Kukamet) The 535 is a push-rod clamp designed for horizontal installation to secure workpieces reliably in workshop jigs and production fixtures. Horizontal foot for stable mounting Max clamping force 4,500 N Galvanised cast body for durability Lightweight: 1.03 kg for easy handling Dependable clamping power for repetitive production The clamp delivers a max clamping force of 4,500 N combined with a holding force of 4,700 N, enabling consistent, reproducible fixation in series production and repetitive machining tasks. High clamping figures translate into reduced slippage and more predictable outcomes during milling, drilling or assembly operations. The unit’s mechanical design focuses on direct force transmission via the push-rod, which ensures efficient transfer of clamp pressure without complex linkages. This efficiency supports faster cycle times and fewer rework instances, contributing measurable improvements to throughput and process reliability. Robust construction that reduces downtime Built around a galvanised cast body, the clamp resists corrosion and mechanical wear in workshop environments where coolants, oils and swarf are present. Galvanising provides a protective zinc layer that slows surface oxidation, extending service life and lowering maintenance frequency. The compact piston with diameter 16 mm is engineered for balanced force distribution and minimal play, which preserves clamping accuracy over prolonged use. These construction choices reduce the need for frequent replacements and help maintain stable clamping behaviour across production batches. Compact fitment and quick installation The horizontal foot configuration facilitates straightforward integration into fixtures and machine tables, while the thrust spindle M10 x 70 allows fine adjustment of contact pressure and position. At 1.03 kg, the unit is light enough for easy handling during setup yet sufficiently robust for industrial use. The clamp’s compact footprint makes it suitable where space is constrained, enabling closer fixture layouts and more efficient use of table area. Reduced setup complexity contributes to faster changeovers and improved overall equipment effectiveness. Suitable for workshop and industrial fixtures As a specialist clamping element, this push-rod device is appropriate for jigs, assembly stations and smaller CNC fixtures that demand secure, repeatable clamping. The simple mechanical design supports maintenance-friendly service procedures and straightforward replacement of wear parts such as the thrust spindle. Backed by a vendor with a European quality filter and a broad product range, the clamp can be sourced as part of a coordinated tooling strategy to standardise clamping across multiple workstations and machines. Request tailored advice from Metav Werkzeuge to integrate the 535 push-rod clamp into production fixtures or to discuss compatible accessories and fixture layouts Technical Data SKU: 535-4-Q16-L GTIN: 8682843521243 Article name: Push-rod clamp (designation 535) Brand: Kukamet Facts Max clamping force: 4,500 N Holding force: 4,700 N Piston diameter: 16 mm Weight: 1.03 kg Thrust spindle: M10 x 70 Special features Mounting: horizontal foot Material: galvanised with cast body Category: Clamp Suitable for workshop and production fixtures FAQ What maximum clamping force does this clamp provide? The clamp reaches a maximum clamping force of 4,500 N; the holding force is specified at 4,700 N for secure fixation. Can the clamp be adjusted for different workpiece heights? Adjustment is provided via the thrust spindle (M10 x 70), allowing fine tuning of contact position and clamping travel. Is the 535 suitable for use in coolant-exposed environments? Yes. The galvanised cast body offers corrosion resistance, making the 535 push-rod clamp appropriate for many workshop conditions. What is the item number to order or reference for procurement? Order or reference by SKU 535-4-Q16-L and the GTIN 8682843521243 for clear identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Push Rod Clamp M10x70 Blackened Finish, 4.65 kN Holding Force - Kukamet
Compact, space-saving design combined with a 4,650 N holding force and an adjustable M10x70 pressure spindle ensures reliable clamping and fewer production interruptions. Order the push-rod clamp directly via Metav Werkzeuge or consult our specialists for application matching. Push-rod clamp 513 (Kukamet) — M10x70 pressure spindle, 4.65 kN holding force The push-rod clamp 513 is a compact rod clamp designed for secure workpiece holding in machining, assembly and fixture applications where quick, repeatable clamping is required Compact rod clamp design Max holding force 4,650 N Pressure spindle M10x70 Blackened burnished finish Secure clamping for repetitive production tasks The 513 delivers consistent clamping through a high holding force of 4,650 N and a maximum pressing force of 4,500 N, reducing the risk of part movement during machining. The mechanical action converts lever motion into axial force, producing reproducible results part after part. This predictability lowers scrap rates and shortens inspection loops, supporting leaner, more efficient workflows. Space-saving integration into jigs and fixtures With a without-base mounting style and a compact footprint, the clamp suits confined fixture designs and modular tooling systems. The M10x70 pressure spindle provides straightforward length adjustment and fine contact control for different workpiece geometries. At approximately 0.78 kg, the unit is light enough for quick handling yet robust enough for fixed installation in production jigs. Built for workshop durability and low maintenance Finished in a blackened burnished surface, the clamp resists corrosion and shows less wear in daily use, maintaining dependable friction behaviour at the contact point. The simple mechanical construction minimises service needs: fewer wear parts and uncomplicated replacement procedures result in lower lifetime maintenance overhead for the workshop. Faster set-up and steady throughput The lever-style push-rod mechanism enables rapid actuation for high-frequency production cycles, shortening cycle times without sacrificing clamping performance. The device’s straightforward operation and robust holding capability support repeatable set-up procedures, helping to keep machines running and reducing downtime between batches. For reliable clamping from Kukamet, request the Push-rod clamp 513 (SKU B513-6) through Metav Werkzeuge for dependable supply from Emmerich — contact Metav consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for technical matching Technical data SKU: B513-6 GTIN: 8680731508772 Manufacturer: Kukamet Facts Max pressing force: 4500 N Max holding force: 4650 N Weight: 0.78 kg Pressure spindle: M10x70 eCl@ss: 21041716 ETIM: EC011973 Designs and special features Finish / material: blackened burnished Mounting style: without base Product type: push-rod clamp (lever-style) Category: clamp FAQ What is the maximum holding force of this clamp? The Kukamet push-rod clamp 513 achieves a maximum holding force of 4,650 N, suited to many standard clamping tasks in production. Which spindle size is fitted for contact adjustment? The unit is equipped with a M10x70 pressure spindle for straightforward length adjustment and precise contact alignment. Is the clamp ready for direct installation in fixtures? Yes, the clamp is supplied without a base, enabling direct integration into modular jigs or custom fixture plates. What finish does the clamp have and why does it matter? The blackened burnished finish provides corrosion resistance and a durable surface that preserves consistent friction behaviour during repeated use. Which SKU and GTIN identify this product? The product is listed as SKU B513-6 with GTIN 8680731508772 for ordering and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Push Rod Clamp Vertical Foot M10x70, Black Oxide Finish - Kukamet
Take advantage of robust clamping performance and a compact, vertical-foot mounting for stable fixtures; the combination of a 4,650 N holding capacity and a M10 x 70 pressure spindle ensures repeatable results in short-cycle production. Order the push-rod clamp 512 directly via Metav Werkzeuge or ask the consultants if additional data is required. Push-rod clamp 512 — Vertical-foot lever clamp with 4.65 kN holding force (Kukamet) The Push-rod clamp 512 is a compact lever-style clamp designed for reliable workholding in metalworking, fixture construction and assembly applications. Vertical-foot mounting for stable installation Up to 4,650 N holding force 4,500 N clamping force Pressure spindle M10 x 70 Consistent force where it matters The clamp delivers a clamping force of 4,500 N (4.5 kN) and a holding force of 4,650 N (4.65 kN), values that translate into reliable retention of workpieces under dynamic loads. These figures support reduced rework and fewer stoppages because components remain fixed during machining or assembly. The specified forces are especially relevant for repetitive tasks where predictable performance shortens cycle times and improves overall process efficiency. Stable mounting and easy adjustment Equipped with a vertical foot for secure fastening, the unit mounts directly to fixture plates or subbases for compact footprint installations. The integrated pressure spindle M10 x 70 provides fine axial adjustment of the contact point, enabling precise setting of the clamping stroke. At a weight of 1.07 kg, the device is light enough for easy positioning during fixturing while retaining the mechanical robustness required for industrial use. The blackened finish reduces visible wear and contributes to long-term surface integrity in workshop environments. Practical use and compatibility Designed as a lever-style push-rod solution, the item is suitable for fixture builders, jigs and assembly stations where a secure, repeatable clamp action is required. The mechanism supports both short clamp cycles and frequent actuation without complex servicing. Combined with Metav’s distribution and technical support, the product is positioned as a dependable component for small-batch production and high-mix manufacturing, providing the confidence of consistent clamping performance and straightforward integration into existing setups. Contact Metav Werkzeuge for personalised technical advice or to request the Kukamet Push-rod clamp 512 (SKU B512-6) and find the right mounting option for the application. Technical data SKU: B512-6 GTIN: 8680731508734 Designation: Push-rod clamp 512 Manufacturer: Kukamet Core data Clamping force max: 4,500 N Holding force max: 4,650 N Weight: 1.07 kg Pressure spindle: M10 x 70 Design / Special features Vertical foot mounting Blackened finish Lever-style push-rod mechanism eCl@ss: 21041716 ETIM: EC011973 FAQ What are the main force specifications of this clamp? The Push-rod clamp 512 provides a clamping force up to 4,500 N and a holding force up to 4,650 N, offering consistent retention for assembly and machining tasks. How is the clamp mounted to a fixture? Mounting is by a vertical foot; the vertical-foot configuration allows direct fastening to fixture plates or subbases for space-efficient installation. What adjustment is available for contact point positioning? Adjustment is effected via the pressure spindle M10 x 70, which permits fine axial setting of the contact point and accurate stroke alignment. Is the finish suitable for workshop environments? The component is supplied with a blackened finish, which improves surface durability and reduces visible wear in standard workshop conditions. Which industries and applications are typical for this clamp? The clamp is well suited to metalworking fixtures, jigs and assembly lines where repeatable, lever-style clamping is required; it is intended for industrial and trade applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Push Rod Clamp Without Foot, Zinc Plated, M10x70 Spindle – Kukamet
Take advantage of a robust, space-saving clamp with a zinc-plated finish and a secure M10x70 spindle, delivering up to 4,500 N of clamping force and 4,650 N holding capacity for reliable fixture performance; order the 513 push-pull clamp directly via Metav Werkzeuge or consult our specialists for application advice. 513 push-pull clamp — zinc-plated, 4,500 N, M10x70 (Kukamet) The 513 push-pull clamp is a compact rod clamp for jigs and fixtures, engineered to provide a secure clamping action and space-saving mounting without a foot. Compact push-pull clamp design Zinc-plated for corrosion resistance M10x70 spindle for reliable engagement 4,500 N clamping and 4,650 N holding force Efficient clamping for compact fixtures The 513 is designed for fixture builders who need a balance of power and small footprint. With a rated clamping force of 4,500 N and a lightweight body of 0.78 kg, the unit minimises bulk in tight assemblies while maintaining consistent securing power. The compact construction reduces interference in multi-clamp setups and simplifies part access, enabling smoother handling during both short runs and repetitive operations. Built for repeatable action, the clamp supports efficient cycle times in production tooling. Technical reliability and fast engagement A threaded spindle of M10x70 spindle length ensures dependable engagement and straightforward integration into jigs or plates. The difference between the rated push force and holding force (4,650 N) provides a safety margin for static retention after actuation, reducing the risk of workpiece shift during secondary operations. The zinc-plated surface offers baseline corrosion protection for general workshop conditions, contributing to longer service life and lower maintenance frequency for fixtures where space and reliability are priorities. Where this clamp adds value in production This rod clamp is suitable for assembly jigs, small-series production and repair benches where a no-foot, inline clamping solution is required. The low weight and compact profile make the unit appropriate for mobile fixtures and nested tooling plates without compromising industrial clamping performance. Specifying such a component helps standardise fixtures across jobs, shortening setup times and reducing inventory complexity when paired with a consistent supplier strategy. Enquire with Metav Werkzeuge for availability, technical matching and ordering of the Kukamet 513 push-pull clamp — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 513-6 GTIN: 8680731502749 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE Facts Max clamping force: 4,500 N Max holding force: 4,650 N Weight: 0.78 kg eClass: 21041716 ETIM: EC011973 Special features Compact rod clamp Zinc-plated surface finish No foot for space-saving mounting M10x70 spindle for secure engagement SKU: 513-6 FAQ What maximum clamping force does the clamp provide? The Kukamet 513 push-pull clamp delivers a maximum clamping force of 4,500 N and a holding force of 4,650 N (SKU 513-6). Is the finish suitable for standard workshop environments? Yes. The zinc-plated finish on the 513 unit provides basic corrosion resistance suitable for general workshop and industrial conditions; additional coating may be considered for aggressive environments. How is the clamp mounted into a fixture? The clamp is supplied without a foot and is intended for direct integration into fixture plates or tooling blocks; the spindle thread is M10x70 for secure mechanical connection. Is the clamp suitable for mobile or lightweight fixtures? With a weight of 0.78 kg the unit is compact and light enough for mobile jigs and portable fixtures while still offering industrial clamping forces. Can the clamp be used across different production stages? The clamp is intended for fixture and jig assembly; its combination of compact size and reliable force makes it suitable for positioning, holding and light machining support within a production sequence. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
4.5 kN Pushrod Clamp Horizontal Foot Zinc-Plated, 1.07 kg - Kukamet
The galvanised construction combined with a defined 4.5 kN clamping force and a compact 1.07 kg body ensures reliable, repeatable holding in workshop and production environments; order directly via Metav Werkzeuge or contact their consultants for specification advice. 511 Rod Clamp – Kukamet push-rod lever clamp, galvanised, 4.5 kN The 511 Rod Clamp is a horizontal-foot push-rod lever clamp designed for secure, repeatable workholding in general workshop and light industrial applications Galvanised steel finish for corrosion protection 4.5 kN clamping force for secure fixing Horizontal-foot mounting for stable installation M10×70 pressure spindle for fine adjustment Secure clamping where it matters The 511 delivers a defined 4.5 kN clamping force with a maximum holding force of 4.65 kN, giving a clear, verifiable basis for selecting the right clamp for repetitive operations. Clamping force refers to the active force applied by the lever mechanism to press a workpiece in position, while holding force indicates resistance to displacement once clamped; together they reduce rework and downtime. The galvanised finish supports long-term use in mixed environments by resisting surface corrosion. Flexible mounting and straightforward adjustment A horizontal foot simplifies installation on flat fixtures or machine beds, enabling stable positioning without additional brackets. The integrated M10×70 pressure spindle allows precise adjustment of clamping height and contact pressure, making it suitable for varied part geometries. At 1.07 kg, the clamp combines portability with mechanical strength, facilitating fast fixture changes and reducing handling effort during setup. Durable design for everyday workshop use Constructed from galvanised steel and operated via a robust lever mechanism, this push-rod type clamp supports frequent cycles with minimal maintenance. The clear mechanical design means inspections and replacements are straightforward, helping maintain production continuity. For combination jigs and small fixtures the clamp provides predictable performance, contributing to efficient workflows and consistent part quality. For reliable clamping solutions from Kukamet, contact Metav Werkzeuge to discuss the 511 rod clamp and integration options; Metav’s consultants can advise on mounting, quantities and delivery from their Emmerich quality hub. Technical data Article number: 511-6 GTIN: 8680731502640 Manufacturer: Kukamet SKU: 511-6 Facts Weight: 1.07 kg Clamping force (max): 4,500 N Holding force (max): 4,650 N Pressure spindle: M10×70 eCl@ss: 21041716 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal foot Type: push-rod lever clamp No special features indicated FAQ What is the maximum clamping force of this clamp? The maximum clamping force is 4,500 N; the Kukamet 511 rod clamp (SKU 511-6) provides a reliable 4.5 kN for secure workholding. Can the clamp be mounted on a machine bed? Yes, the horizontal-foot design permits stable mounting on flat beds and fixtures for machine or bench installations. Is the spindle adjustable for different part heights? The M10×70 pressure spindle on the 511 enables fine adjustment of contact height and pressure for varied workpiece geometries. How resistant is the clamp to corrosion? The device is made from galvanised steel, offering corrosion resistance suitable for general workshop environments and reducing surface wear. Is the clamp suitable for repetitive production use? Yes, the lever mechanism and defined clamping/holding forces make the Kukamet 511 suitable for repetitive cycles with low maintenance requirements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com