Reliable scales for precise industrial weighing
Scales are essential for accurate weight determination in production, laboratory and shipping environments, providing clear benefits in process control, quality assurance and legal compliance. A well-chosen scale delivers the required weighing range and readability while ensuring repeatable results for tasks such as quality control, recipe formulation or parcel handling, and integrates features like tare, counting and data export to streamline workflows. Consideration of environmental influences, routine calibration or legal verification and sturdy construction for heavy-duty use ensures consistent performance with precision scales, platform scales and counting scales.
100x180x300 mm Signal Lamp Three-Colour LED RS-232 Interface For Scales, Red Green Yellow - KERN
Take advantage of rapid visual decision-making with the combination of a 3‑colour LED and RS‑232 power connection, ensuring consistent tolerance checks and seamless integration with existing KERN scales; order the device directly via Metav Werkzeuge or consult our specialists for compatibility advice. KERN CFS-A03 signal lamp — 3‑colour LED, RS‑232 powered (KERN) The KERN CFS-A03 is a compact signal lamp designed for optical support of weighings within tolerance ranges, intended for use alongside KERN scale series in industrial and laboratory environments 3‑colour LED: red, green and yellow Powered via RS‑232 interface Compatible with multiple KERN scale series Interface cable sold separately Faster decisions through clear visual signalling The integrated 3‑colour LED provides immediate visual feedback for out-of-tolerance, within-tolerance and over-limit conditions, enabling faster sorting and fewer stoppages on production lines. As an indicator light for weighing stations, the device reduces reliance on continuous manual checks by offering clear status information at a glance. This reliability supports throughput efficiency and helps maintain consistent quality control without adding complexity to existing routines. Seamless integration with existing scale systems Designed for straightforward connection, the unit receives power and control signals via RS‑232, allowing direct interaction with a wide range of KERN scales. This method keeps wiring compact and centralises signal handling at the scale interface. Compatibility with multiple KERN series ensures flexible deployment across workbenches and packing lines, while the note that the interface cable is sold separately clarifies procurement requirements before installation. Compact, robust design for continuous operation With a compact footprint and modest mass, the lamp fits into tight production environments and mounting arrangements without obstructing workflows. The low-maintenance LED technology offers long service life and consistent luminosity, reducing downtime and replacement frequency. The unit’s role as a dedicated optical support tool helps streamline operator tasks and improves traceability of batch sorting decisions on automated or semi-automated weighing stations. For customised advice on integrating the KERN CFS-A03 into existing systems or to confirm series compatibility, contact Metav Werkzeuge — experts in precision tools and storable supply from Emmerich; our consultants can advise on the required interface cable and delivery options via info@metav-werkzeuge.com or by phone. Technical data Article number: CFS-A03 Manufacturer: KERN GTIN: 4045761133471 Country of origin: CN Facts Dimensions: 100x180x300 mm Weight: 1.04 kg Tariff number: 84239010 eClass: 27110631 ETIM: EC000399 Special features 3‑colour LED: red, green and yellow Powered via RS‑232 by the scale Compatible with KERN series BFB, BFN, BID, CKE, CPB‑N, GAB‑N, GAB‑P, IFB, IFS, IOC, KFB‑TM, KFN‑TM, KIB‑TM, NBB, NFB, NFN, SFB, UFA, UFB, UFC, UFN Interface cable not included FAQ What does the three‑colour LED indicate? The three‑colour system shows under, within and over tolerance states to simplify sorting and visual quality checks for the KERN CFS-A03 signal lamp. How is the lamp powered and controlled? Power and control signals are provided via the scale’s RS‑232 interface; the CFS-A03 relies on the connected scale for operation. Is a connecting cable included with the unit? No, the interface cable for the scale is not included; the necessary cable must be ordered separately according to the scale model. Which scales are compatible with this signal lamp? The lamp is compatible with a broad range of KERN scale series (listed in the technical data) and is intended to integrate directly into existing weighing setups. Can the lamp improve production throughput? By providing clear, immediate visual feedback on tolerance status, the indicator light reduces manual checks and supports faster, more consistent decision-making on the line. Manufacturer: KERN; Address: —; Contact: —
101 g Precision Analytical Balance 0.00001 g Readability, Single-Cell Weighing System, Glass Draft Shield - KERN
Take advantage of the combination of Single‑Cell accuracy, automatic internal calibration and GLP‑ready documentation for reliable results and efficient lab workflows; order the instrument directly via Metav Werkzeuge or ask our consultants if needed. KERN ABT 100-5NM analytical balance — 101 g range, 0.00001 g readability The ABT 100-5NM is an analytical balance designed for laboratory dosing, formulation and quality control, combining a Single‑Cell weighing system with automated calibration for consistent accuracy across locations. Single‑Cell weighing system for high linearity Readability 0.00001 g for ultra‑fine results Internal auto‑calibration with GLP print Large glass windscreen with 3 sliding doors Stainless steel pan 80 mm for easy cleaning Consistent high‑precision measurement for critical tasks The instrument delivers exceptional repeatability and stable measurement performance, with a readability of 0.00001 g, reproducibility 0.00005 g and linearity ±0.00015 g, enabling precise quantification of minute masses within a 101 g range. The Single‑Cell system reduces multiple transducer errors and simplifies load distribution, which means fewer recalibrations and predictable results during routine analysis. These technical attributes translate into trustworthy data for R&D, QC and pharmaceutical routines. Automated calibration and audit‑ready documentation Laboratories benefit from the balance’s internal auto‑calibration, which triggers on temperature shifts ≥ 0.5 °C and at scheduled intervals, maintaining measurement stability without manual intervention. Built‑in reporting includes a GLP‑compliant calibration protocol and a programmable four‑digit weighing ID that prints with calibration records, supporting traceability and audit requirements. The unit also enables immediate transfer of measurement records: automatic data output to PC or printer occurs after each settling, helping to streamline documentation and reduce recording errors. Designed for safe, ergonomic handling and efficient dosing Handling is simplified by a large glass windscreen with three sliding doors, which offers unobstructed access while shielding the weighing chamber from drafts. The balance includes a dosing aid and selectable high‑stability modes and filters that assist in obtaining stable readings during dispensing operations. A combined tare/print function and automatic recipe numbering support clear formulation workflows, while the LCD display (14 mm digits) ensures values are easy to read at a glance. The stainless steel weighing pan (80 mm) is durable and straightforward to clean, reducing downtime between tasks. Built for laboratory integration and everyday reliability The instrument supports broad mains voltages (110–230 V AC) and is supplied with adapters for CH, EURO, UK and US sockets, making it simple to deploy in different locations. Environmental operating parameters (10–30 °C, max. 80% relative humidity) and a compact footprint (217 × 356 × 338 mm) mean the balance fits typical bench environments without special installation. Robust construction and practical connectivity features ensure the device remains a dependable component of measurement infrastructure, with automatic data output to simplify data handling and minimise transcription steps. Select the proven precision of KERN and contact Metav Werkzeuge in Emmerich for expert consultation and reliable supply of the ABT 100-5NM analytical balance. Technical Data Article number: ABT-NM SKU: ABT.100-5NM GTIN: 4045761185517 Manufacturer: KERN Key figures Weighing range: 101 g Readability: 0.00001 g Reproducibility: 0.00005 g Linearity: ±0.00015 g Minimum sample weight: 0.001 g Pan diameter: 80 mm Display digit height: 14 mm Net weight: 7.53 kg Dimensions (W × D × H): 217 × 356 × 338 mm Operating temperature: 10–30 °C Max. relative humidity: 80% Power supply: 110 V - 230 V AC Design & special features Weighing system: Single Cell Pan material: Stainless steel Glass windscreen with 3 sliding doors Internal auto‑calibration (temperature‑ and time‑controlled) GLP‑compliant calibration protocol print Dosing aid; high‑stability mode and selectable filters Combined tare and print function; automatic recipe numbering Automatic data output to PC/printer after each settling Included: protective cover Supplied adapters: CH, EURO, UK, US Country of origin: PH ECLASS: 32120101 FAQ What measurement range and sensitivity does the balance offer? The KERN ABT 100-5NM analytical balance covers a maximum range of 101 g and a sensitivity (readability) of 0.00001 g, making it suitable for ultra‑fine weighing tasks. How does the calibration routine support laboratory compliance? The ABT 100-5NM from KERN features internal automatic calibration triggered by temperature changes and timed intervals; calibration records and a GLP‑compliant protocol can be printed for traceability. Can the balance output data directly to a PC or printer? Yes, the KERN ABT 100-5NM provides automatic data output to a PC or printer after each stable reading, facilitating digital documentation and integration into lab workflows. Is the windscreen suitable for easy sample handling during dispensing? The balance includes a large glass windscreen with three sliding doors, which allows comfortable access for dosing while maintaining protection from drafts for stable measurements. What connections and power options are provided for international use? The KERN ABT 100-5NM accepts 110–230 V AC and is supplied with adapters for CH, EURO, UK and US sockets to accommodate diverse mains configurations. Which features assist with recipe formulation and documentation? Recipe components are automatically numbered and printed with weight values by the ABT 100-5NM, and the combined tare/print function speeds up formulation documentation. KERN — Country of origin: PH — GTIN: 4045761185517
102 g Precision Analytical Balance Single-Cell, Internal Calibration, 0.00001 g Readability, 91 mm Pan, OLED Display - KERN
Take advantage of Single Cell speed, internal automatic calibration and integrated data integrity features for efficient, compliant weighing. Order the KERN ABP 200-5DM directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN ABP 200-5DM — Analytical balance with Single Cell technology and high-resolution readability The KERN ABP 200-5DM is a laboratory analytical balance designed for fast, stable weighing in pharmaceutical, R&D and quality-control environments. Single-Cell technology for rapid, stable weighing Internal automatic calibration at temperature shifts Large glass draft shield with three sliding doors Multifunction stainless-steel weighing pan included Faster results through high-precision measurement The new generation Single Cell weighing system delivers rapid stabilisation and consistent results, reducing cycle times and increasing throughput. With selectable readabilities of 0.00001 g and 0.0001 g and weighing ranges up to 102 g / 220 g, the instrument combines fine resolution with practical capacity. Repeatability and linearity figures (e.g. 0.00005 g reproducibility and ±0.0001 g linearity) translate into reliable numeric values for documentation and statistical process control. For users new to such specifications: smaller readability means the balance detects tinier mass changes, while reproducibility indicates how closely repeated measurements match — both essential for traceable laboratory work. Built for regulated workflows and traceable documentation This analytical balance supports regulated environments by automating routine routines: internal automatic calibration triggers with temperature changes and at timed intervals to keep accuracy independent of location. The instrument offers configurable user profiles, recipe printing with automatic ingredient numbering and data export via RS-232 and USB (host/device). Support for U.S. FDA 21 Part 11-style data integrity features and automatic data output after each stillness assist with audit trails and secure record-keeping. These capabilities make the device particularly well suited for pharmaceutical applications and quality management systems that demand reliable documentation and operator control. Practical design for everyday laboratory use A large glass draft shield with three sliding doors and a multifunction stainless-steel weighing pan reduce airflow interference and shorten settling time, simplifying handling of small samples, tubes and microvessels. The clear OLED display with 12 mm digit height improves readability at the bench, while dosing aids and selectable filter modes support accurate portioning and formulation tasks. Robust construction, a stainless-steel weighing pan and a compact footprint (220 × 370 × 350 mm) make the balance a dependable workshop companion; the unit runs from a universal 100–240 V AC adapter and operates within a 10 °C–30 °C temperature window and up to 80% relative humidity. User-focused functions such as guest mode, barcode access to profiles and permission-controlled adjustments support secure multi-user laboratories. Contact Metav Werkzeuge in Emmerich to discuss specification options for the KERN ABP 200-5DM or to request a customised procurement recommendation based on the Single Cell accuracy and calibration features Technical data Article number: TABP-A SKU: ABP.200-5DM Manufacturer: KERN GTIN: 4045761213944 Origin: PH Core specifications Weighing ranges: 102 g; 220 g Readability: 0.00001 g; 0.0001 g Minimum sample weight: 0.001 g Reproducibility: 0.00005 g; 0.0001 g Linearity: ± 0.0001 g; 0.0002 g Weighing pan diameter: 91 mm Display digit height: 12 mm Net weight: 7.72 kg Operating temperature: 10 °C–30 °C Maximum ambient humidity: 80% Power supply: 100 V–240 V AC 50/60 Hz 0.3 A Power adapters included: CH; EURO; UK; US Special features Single Cell weighing system OLED display Stainless-steel weighing pan Internal automatic calibration (temperature-triggered and timed) Large glass draft shield with three sliding doors Multifunction weighing plate included Dosing aid and selectable filter settings Recipe printing with automatic component numbering Up to 10 user profiles, barcode access and guest mode Interfaces: RS-232 and USB (Host and Device) Automatic data output after each stillness Menus available in German and English Support for U.S. FDA 21 Part 11-style data integrity features Verification class I FAQ What is the smallest mass this balance can reliably measure? The minimum sample weight is 0.001 g; depending on selected readability (0.00001 g or 0.0001 g), the KERN ABP 200-5DM will issue a warning if measurements fall below the configured minimum. Can the balance be integrated into a data-logging system? Yes; the instrument provides RS-232 and USB interfaces for data transfer and supports automatic output to a connected PC or printer after each stable reading. How does the internal automatic calibration work? Calibration is triggered automatically when ambient temperature changes by ≥ 1 °C and at timed intervals (every 4 hours), ensuring consistent accuracy without manual intervention. Is the balance suitable for pharmaceutical routine analysis? The balance is specified for pharmaceutical applications and research; feature sets such as recipe printing, user permissions and U.S. FDA 21 Part 11 support align it with regulated workflows. What measures reduce the influence of air currents on small samples? A large glass draft shield with three sliding doors and a multifunction weighing plate minimise airflow effects and shorten settling times for micro-samples and small vessels. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930 — WhatsApp +49 170 2837271
105mm Tweezer For Handling Small Test Weights, Teflon-Coated Tips - KERN
Take advantage of secure handling of small calibration weights, robust stainless steel construction and a compact 105 mm length for precise control; order the tweezers directly via Metav Werkzeuge or contact our consultants for application advice. Pinzette 315-243 — Precision tweezers by KERN, stainless steel, 105 mm The Pinzette 315-243 is a precision tweezer designed for the secure handling of small calibration weights in laboratories and workshop environments. Secure grip for micro calibration weights Stainless steel construction Length 105 mm for fine control Suitable for 1 mg – 200 g (E1 – M3) Secure handling for trace and routine calibration tasks The compact design delivers a secure grip for very small test weights, reducing the risk of slippage and accidental contact. Its dimensions, including the 105 mm length, allow for controlled, repeatable handling that supports efficient calibration workflows. This contributes to fewer handling errors and a more consistent weighing routine when working with weights from 1 mg – 200 g. Durable construction that keeps processes dependable Manufactured in stainless steel, the tool combines durability with low maintenance, ensuring longevity in daily metrology use. The robust construction helps maintain geometric stability and handling precision under repeated use, which supports reliable measurement results and reduces downtime for replacements. The design suits both laboratory benches and on-site calibration setups where space and dexterity matter. Practical compatibility and metrology clarity Designed for compatibility with standard calibration classifications, the tweezers are suitable for weights in classes E1 – M3, covering high-accuracy laboratory weights as well as routine workshop standards. For users less familiar with weight classes: these designations indicate recognised accuracy ranges used by calibration professionals and metrology services, ensuring the tool is appropriate for precise, standard-compliant handling. Confidence through expert supply and service Sourcing tools from a trusted partner simplifies procurement and post-sale support. Metav Werkzeuge stands for democratisation of precision, offering an extensive range of metrology supplies from its base in Emmerich. With a broad catalogue and a long-standing customer base, the emphasis is on dependable availability and a clear supply chain that supports uninterrupted calibration operations. Contact Metav Werkzeuge for tailored advice on the KERN 315-243 tweezers and to confirm suitability for specific weight classes — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast guidance from our Emmerich team Technical data Article number: 315 SKU: 315-243 Manufacturer: KERN GTIN: 4045761067615 Length: 105 mm Net weight: 0.02 kg Facts Suitable weight range: 1 mg – 200 g Applicable weight classes: E1 – M3 Material: Stainless steel Special features Secure gripping geometry for small calibration weights Compact format for precise handling and repeatability Designed for laboratory and workshop use Rapid dispatch and broad metrology assortment available from supplier FAQ How small a weight can be handled with these tweezers? The Pinzette 315-243 from KERN is suitable for handling weights from 1 mg up to 200 g, covering the usual micro and small calibration weights used in precise weighing tasks. What material is the tool made from and why does that matter? The tweezers are made from stainless steel, giving corrosion resistance and dimensional stability that support consistent handling and long service life in metrology environments. Are these tweezers suitable for laboratory-grade calibration weights? Yes, the KERN 315-243 is specified for weights in classes E1 – M3, which includes high-accuracy laboratory weights as well as standard workshop classes, making it appropriate for professional calibration work. What are the physical dimensions and weight of the tweezers? The tweezers measure 105 mm in length and have a net weight of 0.02 kg, offering a compact tool that balances control with minimal contact force. Metav Werkzeuge, Emmerich am Rhein, Email: info@metav-werkzeuge.com, Tel: +49 2822 7131930
105×148mm Label Roll 45 Labels For KERN YKE - KERN
Take advantage of a compatible label supply that keeps scale printing consistent: the roll fits KERN YKE series, offers the 105×148 mm standard format and contains 45 labels for reliable batch labelling — order directly via Metav Werkzeuge or consult our specialists for tailored advice. YKE-A03 label roll — label supply for KERN scales, 105×148 mm, 45 labels The YKE-A03 label roll supplies clear, standard-format labels for use with compatible KERN scale systems, intended for reliable weight receipts and product identification in retail and production environments. Label roll »YKE-A03« for KERN scales Standard format 105×148 mm 45 labels per roll Consistent, readable receipts with standard-format labels A standard 105×148 mm label format simplifies printing layouts and ensures legible receipts and product tags. The roll’s defined format reduces the need for printer configuration changes and supports barcode and text density typical for scale outputs. With labelled stacks supplied in a uniform size, the process becomes more predictable, lowering the risk of misprints and saving time during shift changes. The standard dimensions also help maintain a uniform presentation across batches, which benefits inventory tracking and customer-facing documentation. Simple replacement and dependable compatibility for production flow Designed as a direct supply for the KERN YKE accessory range, the roll enables fast replacement and minimal interruption to weighing operations. Compatibility with the scale series prevents alignment issues and keeps printing cycles stable; this promotes operational uptime and streamlines routine maintenance. Choosing a roll that matches the device specification avoids calibration interruptions and reduces the need for frequent troubleshooting, supporting continuous throughput on busy packing lines and retail counters. Traceability and supply clarity for workshop and retail needs Each roll is lightweight and compact, making storage simple while allowing rapid stock rotation; the item’s low mass supports easy handling and quick restocking at the point of use. The product is trackable via GTIN and commodity code for reliable inventory management, and its origin is declared for procurement compliance. Sourcing through Metav Werkzeuge adds the benefit of a centralised supply channel and a quality-filtered selection, which supports consistent replenishment and reduces supplier complexity for workshops and specialist retailers. Contact Metav Werkzeuge in Emmerich for supply options, compatibility checks and ordering support at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: YKE-A03 Manufacturer: KERN GTIN: 4045761179929 Origin: PL Commodity code: 84239010 Facts Label format: 105×148 mm Paper strip width: 112 mm Labels per roll: 45 Weight: 0.14 kg Special features Compatible with KERN YKE scale series For scale receipts and product labels SKU: YKE-A03 FAQ What is the label format of this roll? The YKE-A03 label roll supplies 105×148 mm labels suitable for standard scale receipts and product tags used with KERN scales. How many labels are there per roll? Each roll contains 45 labels, offering a compact batch size for routine printing needs on KERN devices. Is this roll compatible with KERN scales? Yes, the roll is specified for compatibility with the KERN YKE series and designed to match the printing requirements of those accessories. What are the paper strip width and the roll weight? The paper strip width is 112 mm and the roll weight is approximately 0.14 kg, facilitating easy handling and storage. Can these labels be used for barcodes and price information? The standard format and printable surface are suitable for barcodes, numeric price data and basic product information when used with compatible KERN scale printers. KERN · Origin: Poland · Dealer contact: Metav Werkzeuge — info@metav-werkzeuge.com · +49 2822 7131930
108×105mm Protective Cover For Scales 5‑Pack, For PBS Platforms - KERN
Take advantage of a practical combination of precise fit and straightforward replacement to protect your weighing equipment and maintain reliable results; the pack provides five replacement covers compatible with PBS weighing plates and can be ordered directly via Metav Werkzeuge or discussed with our consultants. KERN PBS-A01S05 Protective Cover for PBS scales — fits 108 × 105 mm weighing plates The PBS-A01S05 protective cover is a purpose-made accessory for compact PBS bench scales, designed to shield the weighing plate from dust, spills and mechanical wear while preserving measurement accuracy in workshop and industrial environments Fits weighing plates 108 × 105 mm Supplied as a set of 5 covers Compatible with PBS scale models Lightweight, easy to replace Reliable protection that preserves measurement accuracy A simple barrier can prevent particulate contamination and incidental splashes from affecting sensitive weighing surfaces. The protective cover reduces the need for frequent recalibration by protecting the plate area that directly interacts with samples. For users of small bench scales, this minimizes downtime and contributes to consistent results during repeated weighing tasks. The form-fit design ensures compatibility with plates measuring 108 × 105 mm, avoiding slippage or misalignment that can introduce measurement error. Fast replacement to keep processes running Supplied as a pack of five, the covers are intended for routine maintenance cycles and rapid swap-out when a cover becomes worn or contaminated. This pack composition supports scheduled replacement strategies in production and quality-control environments, where maintaining throughput is paramount. Each cover is lightweight (0.02 kg per unit) and designed for quick removal and refitting, allowing technicians to perform a maintenance change in seconds rather than minutes, so normal operations resume with minimal interruption. Practical benefits for workshop and lab environments The accessory is engineered for straightforward use in industrial metrology contexts: it offers a cost-effective way to extend the service life of precision weighing components and reduces the frequency of intensive cleaning. By preventing direct contact between samples and the weighing surface, the cover helps to protect against corrosion and abrasive wear in demanding settings. The combination of easy handling and a tailored fit supports predictable maintenance intervals and lower overall operating effort. Compatibility and traceability for procurement Designed for PBS series bench scales, the cover aligns with the dimensions commonly found on compact weighing platforms; this makes selection clear and reduces the risk of ordering the wrong accessory. The item is identified by the SKU PBS-A01S05 and is distributed by the reputable manufacturer KERN, providing straightforward traceability. For facilities managing inventories, the pack format simplifies stock planning and ensures spare parts are available when needed. Choose KERN quality and order matching protective covers via Metav Werkzeuge for reliable supply from our Emmerich hub — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: PBS-A01S05 Manufacturer: KERN GTIN: 4045761184664 Facts Net weight per cover: 0.02 kg Weighing plate compatibility: 108 × 105 mm Tariff number: 39269097 Special features Pack contents: 5 covers Suitable for PBS scale models Country of origin: CN ECLASS: 24322502 FAQ Is this cover compatible with all PBS bench scales? The cover is compatible with PBS models that use a weighing plate sized 108 × 105 mm; check plate dimensions before ordering. How many covers are included per pack? Each supply unit contains five covers, provided to support scheduled replacement and reduce downtime. What is the item code for ordering spare covers? Order using SKU PBS-A01S05; the product is manufactured by KERN and listed under GTIN 4045761184664. How heavy is each cover? Each cover has a net weight of 0.02 kg, allowing easy handling during routine maintenance. Manufacturer: KERN — Country of origin: CN — GTIN: 4045761184664
10g Aluminium-Protected Case For Single Weights Button/Compact Padded, E1–M3 - KERN
Take advantage of the robust protection and tailored organisation that extend the service life of precision weights; the lightweight aluminium protection and padded interior reduce risk during transport and storage. Order the case directly via Metav Werkzeuge or consult our specialists for application advice. KERN 317-040-600 — Aluminium-protected case for single calibration weights (10 g, E1–M3) the aluminium-protected case provides secure, compact storage for single calibration weights in button/compact form, designed for laboratory and workshop environments where safe handling and traceability matter Aluminium-protected casing for robust storage Padded interior for secure weight protection Designed for single weights, button/compact form Suitable for calibration classes E1–M3 Durable shell for dependable protection The solid aluminium construction offers a lightweight yet rigid barrier against knocks, compression and environmental wear, which helps to preserve the accuracy of stored weights. By reducing mechanical stress during handling and transport, the casing supports longer intervals between recalibrations and lowers the risk of surface damage that can affect measurement uncertainty. The robust housing is especially valuable where frequent movement or shared storage increases the chance of accidental impact, contributing directly to operational reliability. Tailored interior for safe organisation and handling A padded interior with fitted compartments secures individual button or compact-format weights and prevents contact between items. This cushioning minimises micro-abrasion and surface wear while maintaining quick visual access and organised storage. For technicians and calibration staff, the combination of firm external protection and soft internal support reduces handling time and potential errors during weighing procedures, enabling more efficient workflows in both the workshop and the calibration laboratory. Calibration-ready storage that preserves traceability Prepared for nominal 10 g weights and compatible with calibration classes E1–M3, the case supports storage routines for a wide range of precision requirements. Class designations indicate permissible tolerances and intended use: E1 for highest-precision reference weights, down to M3 for general verification tasks. Keeping weights in a purpose-built case helps maintain declared tolerances by shielding them from contaminants and deformation, thereby protecting measurement confidence across successive uses and audits. Choose the KERN aluminium-protected case for reliable preservation of precision weights — contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 317-040-600 GTIN: 4045761222656 Manufacturer: KERN Country of origin: CN Customs tariff number: 84239090 Core specifications Net weight: 0.18 kg Nominal weight compatibility: 10 g Calibration classes: E1–M3 Product category: Prüfgewichte (calibration weights) accessories Designs and special features Material: aluminium Interior: padded Suitable for: single weights, button/compact form Protected storage for precision calibration weights FAQ What nominal weight sizes fit this case? The case is specified for 10 g single-format weights and is designed to accommodate button/compact styles commonly used at that nominal value. Which calibration classes are compatible with the case? Storage is suitable for weights across calibration classes E1–M3, supporting both high-precision reference pieces and general verification weights. How does the aluminium casing benefit weight longevity? Aluminium offers a rigid, lightweight shell that reduces impact and compression risks; combined with the padded interior, it helps to prevent surface damage that can alter measurement accuracy. Is the interior suitable for rapid handling during calibration work? Yes; the fitted, padded compartments provide organised access and secure retention, which streamlines handling and reduces the likelihood of contact-related wear. Who manufactures this case and what is the SKU? The case is produced by KERN and sold under SKU 317-040-600, intended as a protective accessory for single calibration weights. KERN — country of origin: CN — no manufacturer contact provided
10g Plastic Single Weight Case For Button/Compact Weights, For Class E2 - KERN
Protect calibration single weights reliably with a lightweight plastic case designed for 10 g E1/E2 weights; the compact button-style construction keeps weights secure during storage and transport. Benefit from robust plastic material and a minimal 0.02 kg mass for easy handling. Order the KERN case directly via Metav Werkzeuge or consult our specialists if further guidance is required. KERN Plastic Case for Calibration Weights 317-040-400 — compact design for 10 g E1/E2 single weights A Plastic case for single weights that provides secure storage and safe transport for 10 g calibration weights used in class E1 and E2 applications. Compact design for single weights Suitable for class E1 and E2 weights Lightweight, approx. 0.02 kg case Button/compact format for easy stacking Protects weights and reduces handling risk The compact construction offers secure storage and minimises the chance of contamination or mechanical damage to delicate calibration weights. By housing single weights in a tailored button/compact recess, the holder prevents surface contact and abrasion that would otherwise affect calibration integrity. The plastic material balances low mass with sufficient rigidity, enabling safer manual handling and straightforward transport between workbench and storage without adding significant load to shipping or measurement workflows. Conserves accuracy with class-compatible organisation Organised storage supports traceable measurement procedures; the case is specified for 10 g nominal values and compatibility with E1/E2 classes, which makes it suitable for high-precision laboratory and industrial environments. Using a purpose-built container reduces the need for repeated handling and helps preserve the calibration condition of weights that are frequently checked. The compact format also simplifies inventory management by making each weight immediately recognisable and accessible in calibration schedules. Practical convenience for workshop and laboratory use Weighing only about 0.02 kg, this case is easy to position within instrument cabinets or field kits, contributing to an efficient workflow and reduced setup time during routine checks. The design supports neat stacking and space-saving storage while maintaining quick visual identification of the contained nominal value. The result is a tangible gain in operational efficiency: less time spent preparing weights, and more consistent results from measurement chains that depend on protected reference masses. Contact Metav Werkzeuge in Emmerich for product availability and tailored guidance on the KERN 317-040-400 plastic case; our specialists can advise on storage solutions and place orders directly via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 317-040-400 SKU: 317-040-400 GTIN: 4045761081345 Manufacturer: KERN Country of origin: DE Facts Weight of case: 0.02 kg Nominal weight compatibility: 10 g Tariff number: 84239090 Special features Material: Plastic Suitable for: single weights (button/compact) Compatible classes: E1, E2 FAQ Is the case suitable for 10 g calibration weights? Yes. The KERN plastic case 317-040-400 is specified for single weights with a nominal value of 10 g and provides tailored recesses for safe storage. Can this case be used for both E1 and E2 class weights? Yes. The design is compatible with weights used in class E1 and E2, supporting high-precision applications that require careful handling. What is the weight of the empty case? The empty case weighs approximately 0.02 kg, making it easy to handle and convenient for transport between laboratory and workshop. Does the case protect against contamination and mechanical damage? The compact, button-style recesses and rigid plastic body reduce direct contact and abrasion, helping to preserve the condition and measurement reliability of calibration weights. KERN — Germany; contact details not provided.
10g Precision Single Weight Wooden Case Unpadded, For F2–M3 Classes - KERN
Take advantage of the durable wooden construction, precise fit for single calibration weights and compact transportability to keep lab weights organised and ready for use; order the wooden weight case directly via Metav Werkzeuge or consult our specialists for further specification support. Wooden Weight Case 337-040-200 by KERN — unpadded storage for single weights Wooden Weight Case 337-040-200 is a compact wooden case designed for storing and transporting single calibration weights in laboratory and workshop environments Wooden case for single 10 g weights Fits KERN 337/347/357/367 models Unpadded interior for secure storage Lightweight construction, easy to carry Reliable storage for precision weights The Wooden Weight Case provides a straightforward storage solution for precision weights, especially single-piece calibration weights in button or compact form. Manufactured from solid wood material, the case keeps individual weights organised and accessible while avoiding unnecessary bulk. The internal layout is tailored to accept standard single weights used in routine calibration tasks, supporting weights of 10 g and accuracy classes F2–M3, which helps maintain traceability and handling consistency in test procedures. Compact design that supports workshop workflows A compact footprint and lightweight construction make this case suitable for small benches and mobile calibration kits. The design prioritises easy handling and transport; at approximately 0.12 kg, the enclosure adds negligible load to a technician's toolkit while protecting items from scratches during storage. Compatibility with KERN weight series 337, 347, 357 and 367 ensures that the case integrates smoothly into existing equipment fleets, reducing the need for custom storage solutions and simplifying inventory management. Practical features for everyday metrology use The case comes unpadded, which reduces internal volume and makes insertion and removal straightforward for frequent use within calibration cycles. An unpadded interior also suits environments where weights are transferred frequently between instruments and short-term storage is required. The product supports efficient organisation, minimises handling errors and, by providing a dedicated place for each single weight, contributes to consistent measurement routines and prolongs the service life of sensitive calibration masses. Secure reliable storage for KERN single weights — order via Metav Werkzeuge or contact the team at info@metav-werkzeuge.com / +49 2822 7131930 for tailored advice Technical data Article number: 337 SKU: 337-040-200 GTIN: 4045761006355 Manufacturer: KERN Country of origin: DE Facts Weight: 0.12 kg Intended weight: 10 g Accuracy class: F2–M3 Commodity code: 84239090 eClass: 21100103 Special features Material: Wood Interior: Unpadded Fits single weights KERN 337, 347, 357, 367 Product group: Wooden case for single calibration weights FAQ Is this case suitable for 10 g single calibration weights? Yes. The Wooden Weight Case 337-040-200 is designed specifically to accommodate single 10 g calibration weights and is suitable for handling within accuracy classes F2–M3. Which KERN weight models fit this case? The case fits KERN single weights from the 337, 347, 357 and 367 series, providing a consistent storage solution across these compact/button-type models. Does the case have a padded interior to protect weights? No. The interior is unpadded, which reduces bulk and streamlines handling; however, care during transport is advised to avoid mechanical shocks. Is the case suitable for routine workshop transport? Yes. The wooden construction and lightweight overall mass make it practical for bench-to-bench transport and for inclusion in mobile calibration kits. Can this case support formal calibration routines and traceability? The case supports organisational and handling practices that aid traceability for single calibration weights in classes F2–M3, helping maintain consistent procedures during calibration work. KERN, Germany
10g Wooden Case For Single Weights, Padded, For Classes E1–F1 - KERN
Combining a padded wooden interior, a precise fit for 10 g E1–F1 single weights and a lightweight, compact design, this case protects calibration standards while simplifying storage and transport; order the KERN 317-040-100 wooden case directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN 317-040-100 — Wooden case for single calibration weights, padded, 10 g (E1–F1) The KERN 317-040-100 is a wooden etui designed to store and protect single calibration weights in workshop and laboratory environments, suited to button/compact formats. Padded wooden case for single calibration weights Fits 10 g button/compact nominal weights Compatible with KERN 307, 316, 317, 326, 327, 329 Durable natural wood construction Secure storage that preserves calibration integrity A compact, padded interior ensures individual standards remain free from dust, knocks and handling wear, which helps maintain their precision over time. The tailored cavity for a single 10 g nominal weight minimises movement during transport and reduces the risk of abrasion or contamination. By protecting the weight’s surface and edges, the case supports repeatable measurement results and extends the service life of high-class artefacts classified E1–F1. Clear compatibility and space-saving organisation for busy benches The etui’s compact design streamlines storage in instrument cabinets or inspection trolleys while keeping the single weight immediately identifiable and accessible for verification procedures. Compatibility with a range of KERN single-weight models is specified for reliable fitment: the case accepts models 307, 316, 317, 326, 327 and 329. At a mass of 0.13 kg, the case adds negligible load for mobile calibrations and makes handling during routine checks straightforward and efficient. Natural materials meeting workshop demands with a professional finish Constructed from solid wood, the case combines tactile quality with functional protection; the material choice offers a stable housing that resists minor impacts and provides insulating separation from metal tool trays. The product’s origin is made in Germany, reflecting manufacturing standards appropriate for metrological accessories. A padded lining delivers an immediate benefit to traceability workflows by protecting the calibrated surface and supporting consistent measurement practice. For reliable storage of high-class single weights, secure the KERN wooden case through Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for precise application advice. Technical data Article number: 317 SKU: 317-040-100 GTIN: 4045761003590 Manufacturer: KERN Facts Weight: 0.13 kg Material: Wood Origin: DE Commodity code: 84239090 Special features Padded interior For nominal value: 10 g For classes: E1–F1 Fits models: KERN 307, 316, 317, 326, 327, 329 FAQ What size and weight class is this case intended for? The KERN 317-040-100 wooden case is designed specifically for a single 10 g nominal calibration weight classified for use in classes E1–F1. Which weight models fit the etui? This wooden etui fits the listed KERN single-weight models 307, 316, 317, 326, 327 and 329, ensuring a secure hold for button/compact designs. How does the case protect the calibration weight? Protection is provided by a padded interior and a tailored cavity that prevents movement, reducing abrasion and contamination and helping to preserve the weight’s calibration condition. Is the material suitable for workshop environments? The case is made from wood, offering a durable housing with a professional finish and insulating properties suitable for instrument benches and transport. What is the product’s mass for transport planning? The empty case weighs 0.13 kg, adding minimal load when included in mobile calibration kits or inspection trolleys. KERN, Germany — Contact: not provided
10g–20g Plastic Case for Single Calibration Weights, F1–M3 Compact/Button Style - KERN
Take advantage of the combination of secure storage, compact handling and class‑compliant organisation to protect calibration weights and simplify workflow; order the case directly via Metav Werkzeuge or consult our advisors for specification support. KERN Plastic Case for Single Weights 347-050-400 — for 10 g–20 g weights, classes F1–M3 The KERN Plastic Case for Single Weights 347-050-400 offers organised, transport‑ready storage for single calibration weights used in workshops and laboratories. Plastic case for single calibration weights Fits button/compact weight designs Compatible with weight classes F1 to M3 Protect measurement integrity with compact, secure storage The KERN Plastic Case is engineered to safeguard single calibration weights during storage and light transport. The plastic construction combines low weight with dimensional stability, reducing the risk of accidental scratches or contamination that can affect mass values. By keeping individual weights in a dedicated compartment, the case helps maintain measurement accuracy and continuity in calibration routines, supporting efficient quality control and repeatable weighing processes. Lightweight organisation that saves space and handling time A slim, lightweight enclosure simplifies handling on the workbench and in the calibration lab. At approximately 0.02 kg, the case adds negligible mass while offering clear separation for button/compact weight geometries, which minimises handling time and reduces the chance of cross‑contamination between masses. The compact design aids storage density and enables quicker inventory checks, contributing to streamlined workflow and consistent measurement results. Clear compatibility with calibration classes and nominal values Designed for nominal values in the 10 g–20 g range and certified weight classes F1–M3, the case supports commonly used small reference weights in laboratories and service centres. The case accommodates the typical form factors of single weights, ensuring that calibration artefacts remain correctly seated and identifiable. For users less familiar with class designations: F1–M3 indicate graded tolerances; choosing a case that matches those classes helps preserve the reference condition required for traceable weighing procedures. Contact Metav Werkzeuge in Emmerich for tailored advice on KERN calibration accessories and compatible storage options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 347-050-400 Manufacturer: KERN GTIN: 4045761008694 Country of origin: DE ECLASS: 21100103 Facts Nominal values: 10 g–20 g Weight classes: F1–M3 Net weight: 0.02 kg Tariff code: 84239090 Special features Material: Plastic For single weights (button / compact) Product group: Plastic cases for calibration weights FAQ Which nominal weights fit this case? The plastic case accommodates single calibration weights with nominal values in the 10 g–20 g range, matching the intended size and seating for those masses. Which weight classes are compatible with the case? This case is suitable for weights of classes F1 to M3; it is designed to hold items that meet those tolerance grades without compromising identification or storage. Is the case suitable for button or compact weight shapes? Yes — the internal layout is compatible with button/compact geometries, ensuring secure positioning and easy retrieval of individual weights. What material is the case made from and how is it maintained? The case is made from plastic; it is lightweight and can be wiped clean with a soft, lint‑free cloth and a mild cleaning agent to remove dust and residues. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com — +49 2822 7131930
10kg Plastic Case For Individual Calibration Weights F1–M3, Compact Button Design - KERN
Protect calibration weights with a durable, lightweight plastic case that suits nominal 10 kg weights and accuracy classes F1–M3; the compact design secures button/compact weights for storage and transport. Order the item directly via Metav Werkzeuge or ask the consultants for availability and technical clarification. KERN 347-140-400 Plastic case for individual calibration weights — for 10 kg, classes F1–M3 KERN 347-140-400 is a plastic storage case designed to protect and organise individual calibration weights in laboratories and workshops, compatible with button/compact styles. Plastic case for individual calibration weights Fits nominal 10 kg weights Suitable for classes F1–M3 Compatible with button/compact weights Secure storage for precision assets that keeps workflows efficient The plastic case provides organised compartments for individual calibration weights, reducing search time and minimising handling errors. With a design matched to button/compact forms, the layout secures each weight during movement and storage; this supports faster set-up times in routine checks and calibrations. The combination of compact form and clear internal organisation helps maintain the condition of precision masses, which in turn reduces recalibration frequency and downtime. Specified for metrology classes and practical handling Designed specifically for weights with a nominal value of 10 kg and for accuracy F1–M3, the case aligns with common metrology standards, making it a practical choice for calibration labs and industrial workshops. The lightweight plastic construction ensures easy transport between bench and storage while still providing physical protection. Where specialist terminology is used, the listed accuracy classes indicate tolerance ranges and suitability for verification tasks; selecting the correct class prevents measurement errors and ensures traceability in audit situations. Practical benefits for workshops and calibration services This case supports standardised handling procedures by keeping individual weights accessible and identifiable, which improves workflow reliability across shifts. The compact footprint and protective interior reduce the risk of surface damage to calibration masses, preserving measurement integrity. For facilities seeking consistent results with small storage and handling effort, the case offers a straightforward, maintenance-light solution that complements existing calibration equipment. Contact Metav Werkzeuge in Emmerich for precise availability and tailored advice on integrating the KERN 347-140-400 into workshop routines — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 347-140-400 Manufacturer: KERN GTIN: 4045761008908 Origin: DE Material: Kunststoff Facts Nominal weight suitability: 10 kg Accuracy classes: F1–M3 Net weight: 0.02 kg Tariff code: 84239090 ECLASS: 21100103 Special features For individual/button and compact weights Case material: Plastic Intended use: Storage and transport of calibration weights SKU: 347-140-400 FAQ Which nominal value is this case suitable for? The KERN 347-140-400 plastic case accommodates individual calibration weights with a nominal value of 10 kg and is specified for accuracy classes F1–M3. Can button or compact weights be stored securely? Yes. The case is shaped for button/compact forms and contains dedicated compartments that keep each weight protected and organised during storage and transport. What is the case material and net weight? The case is manufactured from durable plastic and has a net weight of 0.02 kg, offering a lightweight storage option without compromising protection. Which accuracy classes are compatible with this case? The case is intended for calibration weights in classes F1 to M3, covering a range of common verification and calibration tasks in laboratories and workshops. Manufacturer: KERN — Germany; Sales and technical enquiries via Metav Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930
10kg Plastic Weight Case For Single Test Weights Button/Compact, Class E2 - KERN
Lightweight protection and clear organisation for single calibration weights reduce the risk of damage and preserve measurement accuracy; the combination of durable plastic, compact form and suitability for E2 class 10 kg weights supports reliable lab and workshop routines. Order the plastic weight case 317-140-400 directly via Metav Werkzeuge or ask our consultants if needed. KERN Plastic weight case 317-140-400 — for 10 kg E2 button/compact weights The Plastic weight case 317-140-400 is a compact protective case designed specifically for a single 10 kg E2 class button/compact calibration weight, offering lightweight storage and secure organisation for calibration equipment. Compact protection for single 10 kg weight Suitable for E2 calibration weights Durable plastic construction Protect calibration accuracy with secure storage A dedicated protective case reduces handling-related wear and environmental contamination, which helps maintain the accuracy of calibration artefacts. Designed for a single 10 kg weight in E2 class, the case provides a defined storage place so the reference mass remains stable between calibrations. Maintaining the condition of calibration weights directly supports repeatable measurement results and reduces the need for frequent reclassification, thereby saving time in quality assurance workflows. Lightweight handling and space-saving organisation The case's plastic construction keeps transport weight low (case weight: 0.02 kg) while still offering robust protection for routine movement between workbench and calibration station. The compact footprint frees valuable bench space in metrology labs and production lines; a single-slot design simplifies inventory management for technical staff and streamlines storage protocols. The lightweight nature also contributes to easier manual handling without compromising the protective function. Compliance-friendly choice for metrology environments Choosing a purpose-built case helps to demonstrate proper handling procedures for certified masses and supports compliance with calibration traceability practices. The product is made under the KERN brand and manufactured in Germany, aligning with expectations for precision tooling and dependable supply chains. By protecting the reference weight from nicks, dust and impact, the case plays a small but essential role in preserving measurement confidence across inspection and testing processes. For advice on storage solutions for calibration weights or to source the KERN 317-140-400 plastic weight case via Metav Werkzeuge in Emmerich, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number: 317-140-400 SKU: 317-140-400 GTIN: 4045761134324 Manufacturer: KERN Origin: DE Facts Nominal weight compatibility: 10 kg Calibration class: E2 Case weight: 0.02 kg Tariff code: 84239090 ECLASS: 21100103 Special features Material: Plastic Designed for single weights (button/compact) Product category: Calibration weights / cases Product group: Plastic case for single weights FAQ Which weights fit this case? The case is intended for a single 10 kg calibration weight of E2 class, specially for button/compact form factors. Is the case suitable for transport between workstations? The plastic construction and compact design make the case suitable for regular movement between bench and calibration area while providing protection for the reference mass. Does this product support traceability procedures? Using the KERN protective case for storage helps preserve the condition of certified masses, which supports ongoing traceability and calibration practices. Who manufactures the case and where is it made? The case is produced by KERN and the product origin is listed as Germany (DE). What is the product identifier for ordering? Refer to SKU 317-140-400 and GTIN 4045761134324 when enquiring or ordering. Metav Werkzeuge, Emmerich am Rhein, Germany — info@metav-werkzeuge.com, +49 2822 7131930
10kg Weight Handle Plastic Coated, For Button Weights E1–M3 - KERN
Take advantage of secure, plastic‑coated handling and compatibility with 10 kg calibration weights in classes E1–M3 for efficient, error‑reduced work. Order the weight handle directly via Metav Werkzeuge or ask our consultants if needed. Weight handle 315-275 — KERN, plastic-coated for 10 kg E1–M3 The weight handle 315-275 is a plastic‑coated accessory designed to lift and move knob‑type calibration weights of 10 kg in classes E1–M3, providing secure handling without damaging polished surfaces. Plastic-coated for secure grip Built for 10 kg calibration weights E1–M3 Not suitable for cast weights Ensure accurate calibration with secure handling Handling calibration masses reliably reduces the risk of measurement error and surface damage. The plastic coating on the lift accessory gives a non‑slip grip and protects delicate weight surfaces, which helps maintain the calibration condition of 10 kg masses. By preventing scratches and contaminants, the device supports repeatable comparisons and extends the service life of reference masses, contributing directly to consistent measurement results and traceable workflows. Ergonomic, lightweight design for efficient workflows The accessory's compact and lightweight construction simplifies repeated handling during calibration routines. An ergonomic form factor minimises handling time and fatigue when transferring knob‑type weights between storage, balances and calibration jigs. The combination of a protective coating and balanced dimensions streamlines routine tasks and increases throughput in metrology labs and workshops where frequent weighing cycles demand swift, secure operations. Clear application limits and compliance guidance This handling tool is specified for knob‑style calibration weights of 10 kg in accuracy classes E1–M3 and is explicitly not suitable for cast weights. Knowing this limitation helps avoid misuse that could compromise measurement integrity or safety. For tasks involving alternative weight geometries or higher‑mass cast items, selection of a correspondingly rated handling tool is recommended to preserve both operator safety and calibration quality. Contact Metav Werkzeuge in Emmerich for tailored advice on calibration accessories; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and ordering Technical data Article number: 315-275 SKU: 315-275 Brand: KERN Handle weight: 0.1 kg For calibration weight: 10 kg Weight classes: E1–M3 Plastic-coated Suitable for knob-type weights Not suitable for cast weights FAQ How does the handle protect calibration weights? The plastic coating on the weight handle cushions contact and prevents scratching of polished mass surfaces, preserving the condition of the 10 kg calibration weights used with the KERN accessory. Is the handle compatible with other weight classes? This accessory is designed specifically for 10 kg knob‑type masses in classes E1–M3; use outside these specifications is not recommended. Can the handle be used with cast iron weights? No, the handle is not suitable for cast weights; it is intended for knob‑style calibration masses only. What should be done if uncertain about compatibility? When compatibility questions arise, consult Metav Werkzeuge for advice on suitable handling tools and alternatives for different weight geometries and classes. Manufacturer: KERN — Address: not provided — Contact: not provided
10kg Wooden Case For Custom Calibration Weights Padded, For Classes E1–F1 - KERN
Take advantage of a padded wooden case that keeps calibration weights organised and protected, compatible with precision classes E1, E2 and F1, and configurable to the required layout for sets up to 10 kg; order tailored solutions via Metav Werkzeuge or consult our specialists for specification support. KERN 315-090-100 Wooden case for individual weight sets — padded, for classes E1–F1 A KERN 315-090-100 wooden case, designed as a tailored housing solution for calibration weight sets, for professional metrology and workshop storage Wooden case for customised weight sets Padded interior for secure storage Suitable for weights up to 10 kg Safeguarding calibration artefacts with padded wooden storage The padded interior provides stable support for individual weights, reducing the risk of scratches and accidental impacts during transport and storage. For calibration results, physical condition matters: a well-protected set preserves the original tolerance and prolongs the service life of each piece. The wooden shell offers a rigid outer structure, while the cushioned inserts ensure consistent positioning, which simplifies handling and reduces re-verification effort. Custom layout for efficient organisation and traceability Configured to customer specifications, the case is drilled and upholstered to match the exact arrangement of a set, enabling immediate identification and systematic storage. This tailored layout minimises handling time during calibration tasks and supports traceability: each item sits in a dedicated location, making inventory checks and audits quicker. For workplaces that manage several weight classes, the bespoke fit helps maintain order and reduces the chance of mix-ups. Designed for professional metrology use and compatibility Engineered for nominal values up to 10 kg and suitable for precision classes E1, E2 and F1, the case accommodates compact or button-style weights while meeting the demands of laboratory and shop-floor environments. The combination of robust wood construction and precision-cut recesses creates a balance between protection and accessibility, supporting routine workflows without adding bulk to the workstation. Made-to-order production and handling note These universal cases are manufactured as special orders to achieve the precise fit required for custom weight sets; as a result, they are exempt from return. This bespoke approach ensures that the housing matches the geometry and sequence of the supplied weights, delivering a ready-to-use storage solution that aligns with calibration protocols and handling procedures. For tailored wooden cases from KERN — configured and supplied via Metav Werkzeuge — please contact our consultants at Metav Werkzeuge to specify the required layout or request additional technical details by e‑mail or phone Technical Data Article number: 315-090-100 SKU: 315-090-100 Manufacturer: KERN GTIN: 4045761003392 Facts Weight: 9.5 kg For weights: up to 10 kg For classes: E1, E2, F1 Tariff number: 84239090 Special features Material: Wood Padded interior Design: button/compact form Origin: Germany ECLASS: 21100103 FAQ What types of weights fit this wooden case? The wooden case is intended for individual calibration weight sets in compact or button form and accommodates nominal values up to 10 kg for classes E1, E2 and F1. Is the interior of the case padded or foam-lined? Yes, the product features a padded interior designed to secure weights and reduce mechanical wear during handling. Can the case be configured for a specific set layout? The wooden case is manufactured to customer specifications and can be drilled and upholstered to match the exact arrangement of the supplied weight set. Are these cases returnable if a custom layout is requested? Because these are made-to-order universal cases produced to specification, they are excluded from return. Who supplies and configures the case for purchase? The case is supplied by KERN and configured via Metav Werkzeuge, which provides specification support and order handling. KERN — Germany. For sales and technical enquiries: Metav Werkzeuge, Emmerich am Rhein — info@metav-werkzeuge.com | +49 2822 7131930
10kg Wooden Case For Single Calibration Weights Padded, For Classes E1–F1 - KERN
Take advantage of reliable protection and tidy storage for calibration weights thanks to a padded wooden case designed for single reference weights. Combine sturdy construction with a secure interior for safer handling and organised transport — order directly via Metav Werkzeuge or consult our specialists for further advice. Wooden case 317-140-100 — padded storage for single calibration weights, compatible with 10 kg E1–F1 The Wooden case 317-140-100 is a padded carrying case for single calibration weights, designed for precision laboratories and workshop environments where safe storage and clear organisation are essential Padded wooden case for single calibration weights Compatible with KERN 307, 316, 317 series Designed for 10 kg E1–F1 class weights Solid wooden construction with secure fit Secure storage that preserves calibration integrity The case offers robust protection for single reference weights, combining a solid wooden case with tailored internal padding to reduce mechanical shock and abrasion during handling and transit. For calibration and verification tasks, maintaining the original surface condition and geometry of a reference mass is essential; this case reduces the risk of damage that could compromise measurement accuracy. The design supports tidy storage and minimises movement inside the box, contributing to repeatable measurement conditions and longer service life of calibration weights. Supports traceable handling and precise workflows Designed for weights in the 10 kg range and suitable for classes E1–F1, the case simplifies organisation during transport between laboratories or across production sites. By keeping reference masses in a dedicated, cushioned compartment, the risk of contamination and handling errors is reduced, which in turn supports traceability in calibration records. The compact layout and labelled compatibility with KERN weight series help maintain a clear workflow for quality assurance processes without introducing unnecessary complexity. Practical design tuned to workshop and lab needs The wooden construction combines aesthetic appeal with functional strength, providing a stable housing that resists deformation while remaining easy to store on workshop shelving. At approximately 0.9 kg empty weight, the case is light enough for routine handling yet substantial enough to feel secure when carrying a precision mass inside. The padded interior cushions the mass and ensures a secure fit, so calibration equipment can be transported or stored with confidence and less frequent need for rework or replacement. Choose the KERN wooden case through Metav Werkzeuge for assured protection and organised storage — contact Metav Werkzeuge in Emmerich for personalised advice or to confirm compatibility with existing calibration sets Technical data SKU: 317-140-100 Manufacturer: KERN GTIN: 4045761003774 Country of origin: DE Facts Article number: 317 Suitable weight: 10 kg Net weight (empty): 0.9 kg Customs tariff number: 84239090 Special features Material: Wood Padded interior Fits single weights (button/compact) Compatible with KERN 307, 316, 317, 326, 327, 329 Suitable for weight classes E1–F1 FAQ What weights fit into this case? The wooden case is designed for a single 10 kg reference weight and fits button/compact forms as specified by KERN for classes E1–F1. Is the interior suitable for delicate reference masses? Yes, the padded interior provides cushioning that helps protect delicate surfaces and maintains the geometry required for precise calibration of reference masses. Which KERN models are compatible with the case? Compatibility includes KERN series such as 307, 316, 317, 326, 327 and 329; the case was designed to accommodate these single-weight formats. Can the case be used for transport between calibration sites? The combination of solid wooden construction and internal padding makes the case suitable for safe transport of a single calibration mass between laboratories and workshops. Does the case help with traceability and storage organisation? Storing a reference mass in the designated padded compartment supports traceable handling and reduced contamination, aiding organised calibration workflows. KERN — Germany. Distributor/Contact: Metav Werkzeuge, info@metav-werkzeuge.com, +49 2822 7131930
10kg Wooden Case For Single Calibration Weights Unpadded, For Class F2–M3 - KERN
Take advantage of robust wooden construction, compact storage for 10 kg single calibration weights and compatibility with several KERN weight series for tidy workshop organisation. Order the case directly via Metav Werkzeuge or consult our specialists for suitability. Wooden case 337-140-200 – wooden storage for single calibration weights, compatible with KERN Wooden case 337-140-200 provides a compact storage solution for single calibration weights with a button/compact form, designed for safe, space-efficient organisation in metrology and workshop environments. Wooden construction for stable storage Compatible with KERN 337/347/357/367 weights Unpadded interior for compact fit Lightweight at 0.82 kg for easy handling Secure, space-saving storage that protects weight geometry The wooden construction offers a stable shell that reduces the risk of deformation or accidental knocks during storage. Designed specifically for single calibration weights with a nominal value of 10 kg, the case keeps individual masses organised and immediately identifiable, which supports efficient calibration workflows. The unpadded interior reduces overall bulk and allows close contact between case and weight to prevent movement; for delicate handling of calibrated masses, this design minimises shifting while maintaining the compact footprint required in busy test rooms. Clear compatibility for streamlined inventory and handling Compatibility with KERN single weights (models 337, 347, 357, 367) simplifies stock management: identical packaging standards mean the same case can be used across several weight series. The shape accommodation for button/compact designs ensures a snug fit, reducing the need for additional inserts. For laboratories and workshops relying on repeatable handling, this uniformity reduces handling time and supports consistent measurement conditions by keeping calibration masses in a stable, designated location. Practical workshop benefits from material choice and form factor Made from wood, the case balances rigidity and low weight — the empty unit weighs approximately 0.82 kg, making handling between storage and workbench straightforward. The material choice contributes to a tactile, durable exterior that tolerates routine use in industrial and craft settings. Manufactured in Germany, the product aligns with established production standards and provides a simple, reliable storage option for calibration equipment where straightforward protection and easy identification are priorities. For secure storage of KERN single calibration weights choose the 337-140-200 wooden case and contact Metav Werkzeuge in Emmerich for advice or to place an order through our distribution channel. Technical Data SKU: 337-140-200 Manufacturer: KERN GTIN: 4045761006560 Country of origin: Germany Product group: Wooden case for single weights Facts Suitable nominal weight: 10 kg Net weight (empty): 0.82 kg ECLASS: 21100103 Tariff number: 84239090 Special features Material: Wood Interior: Unpadded Compatible with: KERN 337, 347, 357, 367 single weights Form: Button/compact design FAQ Is this case suitable for a 10 kg single calibration weight? Yes. The wooden case 337-140-200 is specified for single calibration weights with a nominal value of 10 kg and provides a compact storage solution. Which KERN weight models fit this case? The case is compatible with KERN single weights of model series 337, 347, 357 and 367, designed for button/compact geometries. Does the case include internal padding to protect weights? No. The interior is unpadded, offering a compact fit intended for button/compact single weights without additional inserts. Is the case lightweight for frequent handling in a workshop? Yes. The empty wooden case weighs approximately 0.82 kg, allowing easy movement between storage and the workbench. KERN · Germany · info@metav-werkzeuge.com · +49 2822 7131930
10× Thermal Receipt Paper Rolls For Scales, Compatible With KERN Printers - KERN
Compact pack of thermal receipt rolls, compatible with KERN weighing printers and finished for high-contrast prints — a practical consumable that keeps checkout and weighing stations running without interruption. Order the YKB-A10 paper rolls directly via Metav Werkzeuge or ask the consultants for tailored advice. YKB-A10 thermal receipt paper rolls by KERN — thermal rolls for receipt printers the YKB-A10 thermal receipt paper designed for reliable printing in weighing and point-of-sale applications Thermal receipt rolls for printers Pack of 10 pre-cut rolls Compatible with KERN scales and printers Made in Poland, GTIN 4045761121812 Consistent, high-contrast receipts for daily operations The product supplies thermal paper engineered for clear, high-contrast printing when used with heat-based printers. The heat-sensitive coating produces legible text and simple graphics without ink, ensuring receipts from scales and cash systems remain readable for auditing and customer records. This reliability reduces reprints and operational delays, which supports smoother workflows in busy environments where traceable documentation from weighing equipment is essential. Practical handling that minimises downtime Delivered as a pack of 10, the rolls allow for scheduled replacements, limiting interruptions during peak periods. Each roll is sized for quick insertion into receipt printers commonly paired with scales and billing stations, enabling fast swaps and consistent feed performance. The inclusion of the GTIN on the packaging improves inventory control and traceability, helping facilities maintain stock levels and document consumable usage across multiple workstations. Supply confidence backed by a quality partner Manufactured in Poland, the rolls are procured through a quality-controlled supply chain suited to industrial and retail environments. Sourcing through Metav Werkzeuge combines broad product availability with a quality filter for the European market, reducing the risk of incompatible or substandard consumables. This arrangement supports continuous operation at the workbench or checkout while aligning with procurement processes that favour dependable delivery and clear product provenance. For reliable replacement supplies of KERN thermal receipt rolls and advice on compatibility with weighing equipment, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for expert assistance and fast delivery Technical data Article number: YKB-N-ACC SKU: YKB-A10 Manufacturer: KERN GTIN: 4045761121812 Facts Net weight: 1.2 kg Tariff number: 84239010 ECLASS: 24260490 Special features Category: Accessories — Scales Pack size: 10 rolls Intended use: Receipt paper for printers Country of origin: PL FAQ Are these rolls suitable for standard thermal receipt printers? The rolls are intended as thermal receipt paper for heat-based printers and are compatible with common KERN weighing printers; check printer roll width and core diameter for physical fit. How is traceability ensured for the product? Traceability is supported via the GTIN 4045761121812, which identifies the KERN consumable and assists with inventory and procurement tracking. What is the country of origin for these paper rolls? The rolls are manufactured in Poland, as stated in the product details. How many rolls are included per pack and how does that affect stocking? The product is supplied as a pack of 10 rolls, which facilitates planned stocking and reduces the frequency of reorder cycles. Can these rolls be used with KERN scales for receipts and ticket prints? Yes; the rolls are specified for receipt printing and are compatible with KERN weighing and receipt printer setups, offering consistent print contrast and feed behaviour. KERN — Poland — contact not provided
110g Moisture Analyzer With 0.001g Readability, Halogen Quartz Heater, 14mm LCD - KERN
Take advantage of precise moisture determination, a halogen-quartz glass radiator for fast drying, and dependable data retention to streamline quality control. Order the device directly via Metav Werkzeuge or consult our specialists for implementation advice. KERN DAB 100-3 Moisture Analyser — halogen-quartz glass radiator, 0.001 g readability The KERN DAB 100-3 is a laboratory moisture analyser designed to deliver fast, reproducible moisture results for food, agricultural and industrial samples. Halogen-quartz glass radiator 400 W Readability 0.001 g, reproducibility 0.001 g Internal memory: 15 programmes + 5 processes 50 sample pans included, sample viewing window Consistent results for process control and compliance Modern production and quality assurance demand reliable figures; the KERN DAB 100-3 provides that reliability with a readability of 0.001 g, reproducibility 0.001 g and a weighing range of 110 g. These specifications support tighter quality tolerances and reduce the risk of batch rejection by giving an objective, traceable basis for moisture content decisions. The stated linearity of ±0.003 g and the strain-gauge weighing system underpin measurement confidence and make results comparable across shifts and sites. Faster drying with controllable heat and visual monitoring A 400 W halogen-quartz glass radiator enables rapid, even drying while the analyser’s active heating profile and active shut-off criterion protect heat-sensitive samples. The unit covers drying temperatures between 40 °C and 199 °C, and the viewing window allows operators to verify sample condition during the run, reducing setup errors and repeat tests. Clear readouts—including current temperature and instantaneous moisture percentage—mean faster decision-making and improved throughput for routine analyses. Standardised workflows and easy documentation Preconfigured storage for 15 programmes plus records of the last 5 processes ensures consistent handling across operators and production lines. The graphic LCD display with 14 mm digits keeps results legible on the shop floor, and the internal memory retains the last result until a new measurement overwrites it, simplifying reporting. Supplied with 50 sample pans and aluminium weighing pans, the system reduces the need for immediate accessory purchases and accelerates integration into existing laboratory routines. An application handbook with examples and settings is available in the download centre to support method adoption. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN DAB 100-3 into production workflows or for technical clarification via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: DAB.100-3 SKU: DAB.100-3 GTIN: 4045761179622 Manufacturer: KERN Origin: CN Facts Readability: 0..001 g Reproducibility: 0.001 g Linearity: ±0.003 g Weighing range: 110 g Radiator power: 400 W Display digit height: 14 mm Weighing pan diameter: 92 mm Operating (drying) temperature range: 40 °C–199 °C Ambient humidity max: 80 % Power supply: 230 V AC, 50 Hz Weight: 4.82 kg Special features Halogen-quartz glass radiator Backlit graphic LCD display Active heating profile and active shut-off criterion Display of current temperature and moisture percentage Previous drying time shown Sample viewing window for visual monitoring Internal memory for 15 programmes and 5 processes Last value retention until overwritten 50 sample pans included Aluminium weighing pans Built-in power supply (EURO adapter included) Weighing system: strain gauge Tariff code: 90160010 FAQ How precise are the moisture readings? The KERN DAB 100-3 delivers a readability of 0.001 g with reproducibility of 0.001 g and linearity of ±0.003 g, providing precise moisture content values suitable for laboratory QC. Which sample types can be analysed with this unit? The analyser is suitable for a wide range of samples commonly found in food production, agriculture and industrial testing; the adjustable temperature up to 199 °C and the controlled heating profile help adapt the method to many materials. Can drying programmes be saved for repeated use? Yes. The device stores 15 programmes and records the last 5 processes, enabling standardised routines and quicker setup for recurring tests. Is the heating power sufficient for rapid throughput? The 400 W halogen-quartz glass radiator provides strong, even heating for fast drying cycles while the active shut-off protects samples from overheating. Are sample accessories included? The delivery includes 50 sample pans and aluminium weighing pans, allowing immediate operation for routine sample batches. KERN — origin: CN. Address and contact details not provided.
112mm Statistics Thermal Printer 40 Char Line, 0.75 Lines/s, 100–240V EU/UK/US Adapter Included — KERN
Take advantage of a compact footprint, reliable thermal printing and universal power compatibility for consistent scale statistics and simple log records; order the KERN YKS-01 directly via Metav Werkzeuge or consult our specialists for integration advice. KERN YKS-01 Statistics Thermal Printer — thermal printing, 40-character line The KERN YKS-01 Statistics Thermal Printer is a compact thermal printer designed to record weighing statistics and simple event logs for scales and weighing systems in workshops, laboratories and retail environments. Compact 165 x 140 x 50 mm casing Thermal print technology for clear receipts 40-character max line for concise reports EU/UK/US power adapters included Consistent, machine-readable printouts for production control The compact thermal printing mechanism provides a reliable method to capture measurement results and event statistics from weighing equipment, reducing manual transcription. With a 40-character max line and a print rate of 0.75 lines/s, the unit prioritises clarity and legibility for short statistical reports and timestamps. This supports traceability in production and quality checks while keeping documentation concise and easy to file. The design helps standardise output from multiple devices, simplifying data comparison across shifts. Universal power and straightforward setup for multi-site use Equipped with a plug-in power supply rated 100–240 V and supplied with EU/UK/US adapters, the unit adapts readily to international workshop environments and reduces the need for local power sourcing. The printer’s light weight (1 kg) and compact dimensions ease installation beside a scale or on a workstation shelf. Note that the interface cable is not included, permitting selection of the appropriate connection type for the existing weighing system during integration, which can be advantageous when matching industry-specific interfaces. Space-saving design with clear media handling for daily operation The chassis is engineered to occupy minimal bench space while accommodating a 112 mm paper width, enabling longer runs between roll changes and clear numeric layouts. Originating from France and manufactured by KERN, the device is intended for continuous workshop use where straightforward statistical records are required rather than full-scale data logging. The combination of a small footprint, thermal print technology and international power compatibility makes the unit a practical choice for businesses seeking dependable, low-maintenance printouts for operational records. For reliable statistics printing from KERN and expert advice on integration, contact Metav Werkzeuge — our consultants can advise on the suitable interface cable and delivery from our Emmerich warehouse. Technical Data Article number: YKS-01 Manufacturer: KERN SKU: YKS-01 GTIN: 4045761124677 Origin: France HS code: 84239010 Data Dimensions: 165 x 140 x 50 mm Weight: 1 kg Max characters per line: 40 Paper width: 112 mm Print speed: 0.75 lines/s Input voltage: 100 V - 240 V ECLASS: 19140104 Special features Print type: Thermoprint Power supply: Plug-in power supply Power adapters included: EU, UK, US Interface cable not included Category: Scales accessory (weighing equipment) FAQ What type of printing technology does the unit use? The KERN YKS-01 Statistics Thermal Printer uses thermal printing, producing legible, maintenance-light receipts and statistical lines without ink. Is a power adapter included for different countries? Yes, the device is supplied with EU, UK and US adapters for the plug-in power supply to suit multiple market regions. What paper size does the printer accept? The printer accepts media with a 112 mm paper width, suitable for concise numeric and tabular outputs. Is the interface cable supplied with the printer? No, the interface cable is not included, allowing selection of the correct cable type to match the connected weighing instrument. Can the printer record statistics from industrial scales? Yes, the printer is intended for recording weighing statistics and short logs from scales and weighing systems; consult Metav Werkzeuge for compatibility guidance. Manufacturer: KERN — Origin: France
112mm Thermal Printer 40‑Char Line, 0.75 Lines/s, 100–240V, EU/UK/US Adapters Included - KERN
Take advantage of a compact thermal printer that combines reliable thermal printing with wide voltage compatibility for uninterrupted operation at weighing stations and workbenches; its low-maintenance design and small footprint support consistent labelling and receipt tasks. Order directly via Metav Werkzeuge or consult the specialists for compatibility and delivery from Emmerich. KERN YKB-01N Thermal Printer — compact size, universal power adapters The KERN YKB-01N is a compact thermal printer designed for integration with scales and weighing accessories, providing low-maintenance receipt and label output in industrial and laboratory environments Compact footprint 165 x 140 x 50 mm Thermal printing technology EU/UK/US power adapters included 40 characters per line, 112 mm paper width Reliable, space-saving printing for weighing stations The KERN YKB-01N delivers thermal printing performance in a compact housing, making it suitable where bench space is limited. With a footprint of 165 x 140 x 50 mm and a lightweight construction of 0.35 kg, the unit mounts easily beside balances and scales or fits into mobile weighing setups. Thermal technology eliminates the need for ink cartridges, reducing consumable handling and servicing intervals; together with a print speed of 0.75 lines/s and a 40-character text width, the result is consistent, legible output for price lists, receipts or short labels without frequent intervention. Global power compatibility that reduces interruptions A plug-in power supply with 100–240 V input and included EU/UK/US adapters ensures the printer remains operational across workshops and international facilities. The use of a standard plug-in adapter (steckernetzteil) supports quick deployment and lowers the time required for installation. This broad voltage tolerance and the bundled adapters minimise the risk of downtime when equipment is moved between locations or when replacements are required, contributing to steady production and reliable documentation of weighing results. Designed for integration with scales — know the interface limitations Engineered as an accessory for weighing equipment, the device supports common receipt and label requirements in industrial metrology. It accepts paper strips of 112 mm width and formats up to 40 characters per line for clear data presentation. Note that interface cable not included; appropriate connection cables should be selected according to the scale or indicator interface in use. The simple thermal mechanism and standard connectivity approach allow straightforward integration with established weighing systems, keeping workflows efficient and traceable. Supply reliability and quality assurance from a precision partner Sourcing from Metav Werkzeuge means access to a broad portfolio and a quality filter centred in Emmerich: decades of expertise in precision tools and metrology underpin a dependable supply chain and coherent product selection. The printer complements a one-stop approach to workshop provisioning, where consistent stock management and clear delivery processes support uninterrupted operation. The compact thermal unit aligns with professional needs for durable, low-maintenance peripherals that integrate into existing measurement setups. For guaranteed compatibility with industrial scales, reserve the KERN YKB-01N through Metav Werkzeuge — contact the Metav consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored product advice and delivery from Emmerich. Technical data Article number: YKB-N SKU: YKB-01N Manufacturer: KERN GTIN: 4045761099777 Country of origin: FR Tariff number: 84239010 Facts Dimensions: 165 x 140 x 50 mm Weight: 0.35 kg Print speed: 0.75 lines/s Max characters per line: 40 Paper width: 112 mm Input voltage: 100 V - 240 V Power adapters included: EURO, UK, US Special features Thermal printing Plug-in power supply (steckernetzteil) Interface cable not included Intended use: accessory for scales FAQ Is this printer suitable for laboratory scales? The KERN YKB-01N is intended as an accessory for scales and weighing equipment and provides thermal receipts and labels suitable for laboratory documentation. Does the device require special paper rolls? The unit uses thermal paper with a strip width of 112 mm; rolls and compatible paper types should be selected to match this width and the required print length. Are interface cables supplied with the printer? No, the interface cable is not included; the KERN YKB-01N requires an appropriate connection cable depending on the indicator or scale interface. Can the printer be used in different countries without a voltage converter? Yes, the printer accepts 100–240 V input and is supplied with EURO, UK and US adapters, allowing use in multiple regions without a separate voltage converter. KERN — France
118mm Lifting Eye for Underfloor Weighing, For Precision Scale Models EW‑N/EG‑N - KERN
Take advantage of a compact, purpose-made accessory that ensures reliable attachment for underfloor weighing systems while keeping installation straightforward. Benefit from proven compatibility with KERN EW‑N / EG‑N scale series and a lightweight design that minimises additional load. Order the EG‑A08 directly via Metav Werkzeuge or ask our consultants if needed. EG‑A08 eyelet for underfloor weighing, compatible with KERN EW‑N / EG‑N The EG‑A08 accessory functions as an eyelet designed for underfloor weighing applications, providing a secure attachment point for KERN EW‑N and EG‑N precision scales in industrial and workshop environments. Accessory for KERN EW‑N / EG‑N scales Designed for underfloor weighing applications Lightweight, space‑saving accessory Secure attachment that supports reliable weighing results The EG‑A08 eyelet provides a dedicated attachment point for underfloor scale installations, helping to maintain stable load transfer from the weighing platform to the instrument. By offering a defined anchor, the accessory reduces the risk of shifting or misalignment during routine use, which in turn supports accurate and repeatable measurements. In industrial metrology contexts, ensuring consistent mechanical contact is a practical way to protect calibration and avoid rework, so the accessory acts as a small but important contributor to process reliability. Space‑efficient design for integration into existing setups Compact and lightweight, the accessory is intended to fit into confined installation spaces common in workshop pit or flush‑mount weighing solutions. The minimal mass keeps added load negligible while the small footprint means the eyelet can be retrofitted without extensive modification to surrounding infrastructure. For technicians planning or upgrading underfloor weighing systems, this compactness simplifies planning and reduces downtime during installation or maintenance. Compatibility and practicality for professional metrology Engineered as an accessory for the KERN EW‑N and EG‑N series, the product emphasises practical compatibility with established precision scales. This focus on fitment allows procurement teams to reduce uncertainty when specifying components for weighing systems. The accessory supports straightforward installation workflows and contributes to an organised, durable weighing setup suited to repetitive industrial use, aligning with the operational demands of manufacturing and quality control environments. Contact Metav Werkzeuge for confirmation of fitment and procurement assistance — reach our advisors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to secure the KERN accessory for your weighing system. Technical data Article number: EG‑A08 Manufacturer: KERN SKU: EG‑A08 Facts Weight: 0.01 kg GTIN: 4045761028326 HS code: 90160090 Special features Application: underfloor weighing accessory Compatibility: for KERN EW‑N / EG‑N scale series Category: Scales / Accessories Origin: JP FAQ Is this eyelet compatible with KERN EW‑N and EG‑N scales? Yes. The EG‑A08 eyelet is designed for compatibility with the KERN EW‑N and EG‑N series to enable secure underfloor weighing installations. How does the accessory affect weighing accuracy? The accessory provides a stable attachment point that supports consistent load transfer, helping the scale to deliver repeatable and reliable measurement results. Is the eyelet suitable for retrofitting existing underfloor scales? The accessory’s compact and lightweight design allows for straightforward retrofitting into many underfloor weighing setups without major structural changes. What identification is used for ordering this accessory? Order using the article number EG‑A08 or GTIN 4045761028326; the accessory is supplied by KERN and distributed via Metav Werkzeuge. Manufacturer: KERN — Japan; Contact via Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930
12 kg; 30 kg, 0,2 g; 0,5 g Industriezählwaage wahlweise eichfähig, komfortable Zehnertastatur, 60.000 Punkte - KERN
Industriezählwaage Die Industriezählwaage von KERN ist eine robuste Zählwaage für industrielle Inventur- und Kommissionieraufgaben mit hoher Zählauflösung und ergonomischer Bedienung. Industriezählwaage von KERN mit robuster Bauart Komfortable Zehnertastatur für schnelle Dateneingabe Zählauflösung bis 60.000 Punkte für präzise Ergebnisse Drei Kontrastreiche LCD-Displays für einfache Ablesung Wägeplattform 400×300 mm aus Edelstahl Präzise Zählungen für Inventur und Produktion Die Industriezählwaage bietet eine sehr feine Zählauflösung von bis zu 60.000 Punkten und Ablesbarkeiten von 0,2 g bzw. 0,5 g, wodurch selbst kleine Stückgewichte zuverlässig erfasst werden. Mit einem kleinstmöglichen Teilegewicht von 500 mg im Laborbetrieb und 5 g im Normalbetrieb lassen sich Bauteile und Kleinteile sicher zählen. Diese Genauigkeit reduziert Nacharbeit und beschleunigt Inventuren messbar. Ergonomische Bedienung und klare Anzeige Die Anlage verfügt über eine Zehnertastatur und einen großzügigen Tastenblock, der schnelle Eingaben von Tarawerten, Referenzgewichten und Grenzwerten ermöglicht. Drei LCD-Displays (Ziffernhöhe 16,5 mm) zeigen Gewicht, Referenzgewicht und Gesamtstückzahl gleichzeitig an, was Bedienfehler minimiert. Die manuelle Referenzoptimierung verbessert stufenweise den Durchschnittswert des Teilegewichts, und Summierfunktionen vereinfachen die Verarbeitung großer Stückzahlen. Eine Arbeitsschutzhaube ist im Lieferumfang enthalten. Robuste Konstruktion und Einsatzbereiche Gehäuse aus Kunststoff kombiniert mit einer Wägeplatte aus Edelstahl macht die Zählwaage widerstandsfähig gegenüber industriellen Anforderungen. Mit Abmessungen der Wägeplattform von 400×300×120 mm und einem Eigengewicht von 10,03 kg ist das Gerät für Lagerlogistik, Versand, Kommissionierung, Inventur und Kunststofftechnik ausgelegt. Die Bauweise entspricht dem Industriestandard und ist für den rauen Einsatz in Werksumgebungen konzipiert. Serviceoptionen und technische Erweiterungen Als Mehrteilungswaage schaltet das System bei veränderter Last automatisch in den nächstgrößeren oder -kleineren Wägebereich um, wodurch große Dynamiken im Messbereich effizient gehandhabt werden. Optional ist ein Akku verfügbar (Akku optional (Factory)) mit einer Ladezeit von 12 h. Das Steckernetzteil unterstützt 100–240 V~ 50/60 Hz 190 mA und wird mit Adaptern für CH, EURO, UK und US geliefert. Für Kalibrierung und Nachweisführung steht die Vor Ort Kalibrierung durch den Prüfdienst zur Verfügung. Die KERN Industriezählwaage empfiehlt sich besonders für präzise Inventuren und zuverlässige Zählprozesse – bei Fragen beraten METAV Werkzeuge gern persönlich: 📧 info@metav-werkzeuge.com | ☎️ +49 2822 7131930 | ✔️ WhatsApp +49 170 2837271 Technische Daten Bezeichnung: Industriezählwaage Marke: KERN SKU: IFS.30K0.2DL Wägebereiche: 12 kg; 30 kg Ablesbarkeit (d): 0,2 g; 0,5 g Reproduzierbarkeit: 0,2 g; 0,5 g Linearität: ± 0,8 g; 2 g Kleinstes Teilegewicht beim Stückzahlen (Labor): 500 mg Kleinstes Teilegewicht beim Stückzahlen (Normal): 5 g Wägeplattform Abmessungen: 400×300×120 mm Wägefläche rechteckig: 400×300 mm Displayart: LCD Display Ziffernhöhe: 16,5 mm Wagesystem: Dehnungsmessstreifen Material: Gehäuse aus Kunststoff und Wägeplatte aus Edelstahl Gewicht: 10,03 kg Betriebstemperatur: 0⁰C-40⁰C Luftfeuchte Umgebung max: 80% Akku: Akku optional (Factory) Akku Ladezeit: 12 h Eingangsspannung Netzteil: 100-240V~ 50/60Hz 190mA Netzteil Adapter für Länder im Lieferumfang: CH, EURO, UK, US Netzteil Art: Steckernetzteil Mehrteilungswaage: schaltet bei zunehmender oder abnehmender Last automatisch in den nächstgrößeren oder -kleineren Wägebereich um Ausdruck: Datum und Uhrzeit möglich Arbeitsschutzhaube: im Lieferumfang enthalten Anwendungsgebiete: Kunststofftechnik; Lagerlogistik; Versand; Zählanwendungen; Kommissionierung und Inventur Warennummer: 84238129 Ursprungsland: CN Bezeichnung 2: wahlweise eichfähig Hersteller: KERN & SOHN GmbH; Ziegelei 1; 72336 Balingen-Frommern; info@kern-sohn.com FAQ Wie genau zählt die Industriezählwaage von KERN? Die Industriezählwaage von KERN erreicht eine Zählauflösung bis 60.000 Punkte und Ablesbarkeiten von 0,2 g bzw. 0,5 g, wodurch sie für präzise Zählaufgaben und die Verarbeitung kleiner Teile gut geeignet ist. Ist die KERN Industriezählwaage für Inventuren in der Logistik geeignet? Ja, die KERN Industriezählwaage ist speziell für Lagerlogistik, Kommissionierung und Inventur konzipiert und erleichtert durch Summierfunktionen sowie drei separate Displays die schnelle Verarbeitung großer Stückzahlen. Kann die Industriezählwaage von KERN mobil betrieben werden? Das Gerät bietet die Option eines Akkus (Akku optional (Factory)) und kann mit dem mitgelieferten Steckernetzteil betrieben werden; Akkubetrieb ist über die werkseitige Option möglich. Wie wird die Bedienung bei der KERN Industriezählwaage unterstützt? Die KERN Industriezählwaage verfügt über eine komfortable Zehnertastatur, kontrastreiche LCD-Displays und eine Arbeitsschutzhaube, wodurch Eingabe, Ablesung und sichere Nutzung im Arbeitsalltag vereinfacht werden.
12,000 g Industrial Table Scale 0.1 g Readability Stainless Steel Pan 294×225 mm LCD - KERN
Benefit from precise 0.1 g readability, a robust stainless-steel weighing plate and versatile power options for uninterrupted portioning and inspection; order the table scale directly via Metav Werkzeuge or ask our consultants for tailored advice. KERN GAB.12K0.1N table scale — 12,000 g capacity, 0.1 g readability The KERN GAB.12K0.1N is a compact table scale designed for control and portioning tasks in industrial and workshop environments, offering laboratory-level sensitivity within a durable workshop housing. 0.1 g readability for fine portioning 12,000 g maximum capacity Stainless-steel rectangular weighing plate Optional internal rechargeable battery Accurate results for consistent portion control The combination of 0.1 g readability and a strain-gauge weighing system provides reliable, repeatable measurements that reduce waste and rework in repetitive portioning tasks. Linearity at ±0.3 g and a reproducibility of 0.1 g mean measurements remain trustworthy across the weighing range, supporting quality control procedures and process documentation. This technical stability translates directly into fewer production interruptions and clearer audit trails. Robust design made for everyday workshop use A rectangular stainless-steel weighing plate (294×225 mm) sits within a compact housing (320×330×125 mm), enabling comfortable handling of trays and portions while resisting corrosion from routine cleaning. The clear LCD display with 24 mm digits improves legibility in busy environments and helps operators read results quickly, reducing the likelihood of handling errors. With a total unit weight of 3.25 kg the instrument balances portability with a stable base for accurate readings. Flexible operation and straightforward integration Power is supplied via a 110–230 V AC adapter (plugs for CH, EU and UK included) and an optional internal rechargeable battery that charges in roughly 12 hours, enabling temporary cordless use for mobile workstations or market checks. Operating conditions are 0 °C to 40 °C with up to 80% relative humidity, allowing reliable performance in standard production and storage areas. The scale’s design focuses on practical benefits: clear readouts, simple power options and measurable stability for routine control and portioning tasks. Contact Metav Werkzeuge in Emmerich for availability, technical consultation and a tailored quotation for the KERN GAB.12K0.1N table scale Technical data SKU: GAB.12K0.1N Article number: GAB-N GTIN: 4045761111646 Manufacturer: KERN Country of origin: China Core technical data Maximum capacity: 12,000 g Readability: 0.1 g Reproducibility: 0.1 g Linearity: ± 0.3 g Weighing plate: 294×225 mm Housing dimensions: 320×330×125 mm Unit weight: 3.25 kg Display digit height: 24 mm Operating temperature: 0 °C–40 °C Maximum ambient humidity: 80% Battery charging time: 12 h Minimum piece weight (normal counting): 1 g Minimum piece weight (laboratory counting): 100 mg Special features Weighing plate material: stainless steel Weighing system: strain-gauge Display type: LCD Power supply: 110–230 V AC Power adapter included for CH, EU and UK Optional internal rechargeable battery Intended use: control and portioning ECLASS: 27320401 TARIC / HS code: 84238129 FAQ What is the maximum weighing capacity of the scale? The maximum capacity is 12,000 g as stated for the KERN GAB.12K0.1N table scale. How precise is the instrument for portioning tasks? Precision is 0.1 g readability with reproducibility at 0.1 g and linearity of ±0.3 g, suitable for fine portion control. Can the scale operate without mains power? Yes, the KERN GAB.12K0.1N supports an optional internal rechargeable battery; charging time is approximately 12 hours. Is the weighing surface suitable for frequent cleaning and food-contact environments? The rectangular weighing plate is made from stainless steel, making it resistant to routine cleaning and appropriate for many production-floor hygienic practices. Which accessories are included for international use? A mains adapter with plugs for CH, EU and UK is supplied with the unit. KERN — Origin: China — Contact: not specified
Accurate weighing that keeps production consistent
Scales are measuring instruments that determine the weight, force or count of an object and are essential across workshops and production lines. From precision scales that resolve fractions of a milligram to crane scales that handle several tonnes, the right weighing equipment ensures process reliability, legal compliance and operational efficiency.
How the right scale supports your workflow
Scales convert mechanical or electronic signals into repeatable weight values; external factors such as local gravity, magnetism, air buoyancy and vibration influence the result and often require site-specific adjustment. For legally binding measurements a statutory verification is required, while routine quality assurance is achieved through documented calibration. Choosing the correct combination of measuring range and readability avoids unnecessary sensitivity and stabilises throughput.
Practical advantages you notice every day
- Fast, reproducible results that reduce rework and speed up throughput.
- Better process control through repeatability and consistent stabilisation times.
- Compliance where required: support for statutory verification and DAkkS-accredited calibration services.
- Lower downtime via robust designs for industrial environments and user-friendly tare functions.
- Versatility across applications with options such as precision scales, analytical balances, platform scales, counting scales and checkweighers.
Premium measurement from a trusted partnership
KERN & SOHN represents a long-established premium choice for precise weighing and metrology, offering an extensive range of instruments and accredited services. Metav acts as your procurement and quality filter from Emmerich: decades of expertise, over 48,000 customers and a catalogue of more than 250,000 products ensure reliable supply and consolidated sourcing for industry, trade and crafts.
Key technical data at a glance
- measuring range: from sub-milligram to multiple tonnes
- readability (d): smallest display step, determines sensitivity
- linearity: specification for deviation across the measuring range
- tare: container weight subtraction, essential for net weight determination
- environmental influences: gravity, magnetism, air buoyancy, vibration, temperature, draught
- common types: precision scales, analytical balances, platform scales, counting scales, checkweighers
- verification vs calibration: statutory verification required for legally relevant weighing; calibration for traceable quality assurance
- application areas: laboratory, production, warehouse, shipping, retail, gastronomy
FAQ
What does readability (d) mean for scales?
Readability is the smallest weight increment a scale displays. For precision scales, a smaller readability gives finer resolution but increases sensitivity to draughts and vibration.
What is the difference between accuracy and repeatability?
Accuracy describes how close a measured value is to the true value; repeatability describes how consistently a scale returns the same result under identical conditions. Both matter, but repeatability is often decisive for stable production processes.
When do I need a verified (statutory) scale?
A verified scale is required whenever weight determines legal transactions, for example sales by weight. For internal quality control, a documented calibration is typically sufficient.
Why does my scale show fluctuating values despite correct operation?
Fluctuations are often caused by environmental factors: air draught, nearby vibration, temperature changes or an unstable support. Site selection and appropriate housing or wind protection reduce this effect.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com