Precision boring bars with internal coolant for deep hole accuracy
Boring bars with internal coolant are precision tools designed to enlarge and finish existing holes, delivering tight dimensional and form tolerances while preventing tool breakage and surface damage; they are essential for deep bores and blind holes where external cooling cannot reach the cutting edge. These systems force high-pressure coolant through axial channels directly to the cutter, which reduces thermal stress and efficiently evacuates chips, making them ideal for machining difficult-to-cut or long-chipping materials. As a compact tool solution they combine rigidity, chip control and cooling to improve cycle times and extend tool life, with the main advantages being enhanced hole quality, repeatability and reduced rework for production and maintenance machining operations.
16mm S12K STFCL Boring Bar STFC For TCMT Indexable Inserts 12mm Shank, 125mm Overall Length - Teknik Makina
Take advantage of a compact, rigid design and precise compatibility with TCMT 1102 inserts for consistent internal turning results; the combination of a 12 mm shank and a 125 mm overall length supports stable machining and simplified tool setup. Order the item via Metav Werkzeuge or consult the specialists there for application advice and availability. S12K STFCL boring bar – STFC for TCMT indexable inserts, left-hand The S12K STFCL boring bar is a left-hand internal turning holder designed for use with TCMT 1102 indexable inserts, offering a compact shank and a 90° cutting configuration for reliable lathe operations. ISO designation S12K STFCL compatible For TCMT 1102 indexable inserts Left-hand cutting direction, 90° angle Shank Ø12 mm and 125 mm overall length Stable mounting and precise insert compatibility for repeatable results The S12K STFCL designation denotes a standardised shank and clamping geometry that simplifies tool selection and machine setup. With compatibility for TCMT 1102 indexable inserts, the holder ensures repeatable insert seating and consistent cutting edge position, which reduces the need for frequent readjustment. This results in a predictable machining process and supports shorter machine downtime when replacing inserts. Rigid design that reduces vibration and improves surface finish A shank Ø12 mm combined with a 16 mm diameter cutting section and a compact 125 mm length provides a stiff tool assembly that helps suppress chatter in typical internal turning applications. The reduced deflection improves surface quality and dimensional stability, especially in finishing passes where a 90° cutting angle and left-hand cutting orientation are required. The tool's modest weight (0.118 kg) contributes to easier handling without compromising rigidity. Efficient insert handling and lower operating cost Designed for indexable inserts, the holder allows fast replacement of worn cutting edges without full tool withdrawal from the machine. This modular approach supports efficient production workflows: inserts can be rotated or exchanged quickly, lowering tooling consumption and contributing to a leaner process. The left-hand configuration suits turning operations where the workpiece feed and lathe set-up demand a reversed cutting direction. Practical setup and shop-floor advantages The compact holder size and standard ISO labelling facilitate rapid identification and integration into existing toolbanks and spindle arrangements. Clear designation and standardised clamping reduce set-up errors and accelerate changeover times at the machine. The straightforward geometry also aids in programming and fixture planning, making the holder suitable for workshops seeking dependable, easy-to-standardise tooling components. For tailored machining recommendations or to order the Teknik Cutting Tools S12K STFCL boring bar, contact Metav Werkzeuge — expert advice and reliable supply from Emmerich are available to ensure the correct tool selection for the application Technical Data Article number: K184TM Manufacturer: Teknik Makina SKU: K184TM Shank diameter: 12 mm Cutting section diameter: 16 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.118 kg Cutting angle: 90° ISO designation: S12K STFCL Compatible inserts: TCMT 1102 Insert style: STFC for TCMT indexable inserts Cutting direction: left FAQ What insert type is recommended for this holder? The holder is designed for TCMT 1102 indexable inserts; using the specified insert type ensures correct seating and cutting geometry for the Teknik Cutting Tools S12K STFCL boring bar. Is the cutting direction left-hand or right-hand? This tool features a left-hand cutting orientation, making it suitable for internal turning operations that require reversed feed direction. What are the key dimensions to check for machine compatibility? Verify the shank Ø12 mm, overall length 125 mm and the 16 mm cutting diameter when planning tooling holders and turret pockets to ensure correct fit. How does the 90° cutting angle influence machining? A 90° cutting angle provides a perpendicular relief for facing and shoulder operations, promoting predictable chip flow and consistent surface finish in internal turning tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm S14Q SCLCR Indexable Boring Bar 180mm, 95° Cutting Angle, Ø18mm Shank - Teknik Makina
Take advantage of the combination of a robust 18 mm shank, a 95° cutting angle and compatibility with CC-- 09T3 indexable inserts for reliable, repeatable turning operations; order directly via Metav Werkzeuge or consult our specialists for fitment and delivery. SCLC boring bar S14Q SCLCR (for CC-- 09T3 inserts) — 18 mm shank, 180 mm overall length (Teknik Makina) The SCLC boring bar S14Q SCLCR is a right-hand external turning holder designed to accept CC-- 09T3 indexable inserts for precise facing and finishing in CNC turning applications 18 mm shank for robust clamping Compatible with CC-- 09T3 inserts 95° cutting angle for precise engagement 180 mm overall length for deep reach Consistent clamping for steady machining forces A solid 18 mm shank provides a secure grip in standard toolholders, reducing vibration and improving surface finish. The holder’s construction maintains tool alignment during the cut, which translates into fewer rejects and less rework. The ISO designation S14Q SCLCR denotes a standardised holder geometry that simplifies integration with existing turret setups and reduces setup time. Designed for insert compatibility and accessibility Built specifically for CC-- 09T3 indexable inserts, this turning holder ensures correct seating and repeatable index positions, enabling quick insert changes and predictable tool life. The 180 mm overall length gives extra reach for deep or recessed operations while the 16 mm cutting diameter and 45 mm cutting height balance rigidity with access, making the holder suitable for many external turning tasks in jobbing and series production. Precise engagement and efficient chip control The 95° cutting angle sets the insert for a controlled entry into material, improving engagement stability and reducing chatter on interrupted cuts. With a lightweight construction of approximately 0.285 kg, the holder minimises centrifugal loads at higher spindle speeds without compromising rigidity. The right-hand cutting orientation supports standard turning cycles and straightforward programming on CNC lathes, while the robust tool geometry supports consistent chip formation and easier post-process cleaning. For expert advice on integrating Teknik Cutting Tools’ SCLC boring bar into existing toolrooms and for supply via Metav Werkzeuge, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K108TM Brand: Teknik Makina ISO designation: S14Q SCLCR Model: SCLC for CC-- Indexable Inserts SKU: K108TM Key dimensions Shank diameter: 18 mm Overall length: 180 mm Cutting diameter: 16 mm Cutting height: 45 mm Cutting angle: 95° Weight: 0.285 kg Compatibility & features Compatible inserts: CC-- 09T3 Cutting direction: right Clamping size: 09 Suitable for external turning and facing Right-hand turning holder design FAQ What insert type fits this holder? The holder accepts CC-- 09T3 indexable inserts; the geometry ensures correct seating and repeatable indexing for secure clamping. Is the holder suitable for deep reach boring? With an 180 mm overall length, the tool is designed to reach recessed areas while maintaining rigidity for many external turning tasks. What is the shank diameter and why does it matter? The shank diameter is 18 mm; this dimension ensures robust clamping in standard toolposts and reduces vibration for improved surface finish. Can this holder be used on high-speed lathes? The lightweight design (≈ 0.285 kg) and stable geometry make the holder suitable for moderate to high spindle speeds, provided the correct insert grade and machine parameters are used. What is the ISO designation and how does it help? The S14Q SCLCR ISO designation defines the holder’s interface and orientation, simplifying selection and ensuring compatibility with turret systems and toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm SCLC Indexable Drill Holder 30mm Cutting Height, 95° Cutting Angle - Teknik Makina
Take advantage of the combination of precise geometry, sturdy shank design and insert compatibility to maintain consistent external turning operations; order the tool via Metav Werkzeuge or consult our specialists for application advice. SCLC for CC-- Indexable Inserts — S16Q SCLCR Boring Bar (Ø16, 180 mm) by Teknik Makina The SCLC for CC-- Indexable Inserts is a right-hand external boring bar designed for turning operations with CC-- 09T3 indexable inserts, suitable for shops and CNC lathes requiring stable insert mounting. Right-hand cutting configuration Ø16 mm cutting diameter 180 mm total length Compatible with CC-- 09T3 inserts Consistent chip engagement for steady turning results The holder is engineered as a boring bar for external turning, combining a compact profile with defined geometry to support repeatable cuts. Thanks to the Ø16 mm nominal cutting diameter and the 95° cutting angle, the tool provides a stable cutting engagement that reduces vibration in light- to medium-duty turning operations. The compatibility with CC-- 09T3 indexable inserts simplifies tool procurement and changeover, while the right-hand configuration ensures the correct cutting direction for standard lathe set-ups. By choosing a purpose-built insert holder the machining process gains in predictability and surface finish quality. Robust shank and insert clamping for fast set-up The component features a 20 mm shank diameter that contributes to rigidity at the tool post and lowers deflection under cutting forces, improving dimensional control. A cutting height of 30 mm ensures the insert seat aligns closely with common tool-post setups, reducing the need for shims or adjustments. The assembly weighs 0.317 kg, which keeps inertial load low during rapid tool indexing or spindle acceleration. This construction shortens preparation time and supports efficient cycle-times on production lathes and turning centres. Practical advantages on the shop floor The tool holder’s ISO designation S16Q SCLCR indicates an industry-standard interface and orientation, simplifying integration into existing tool systems. The indexable-insert approach offers lower running costs compared with brazed tooling because only the insert is consumed during wear. For operations where setup consistency matters, the combination of a defined shank, clear insert compatibility and a standard length of 180 mm reduces downtime for replacements and inspection. Technical clarification and cutting data can be provided from the supplier to help match grade and geometry with workpiece material. For machining requirements that demand consistent external turning, consider the Teknik Cutting Tools S16Q SCLCR boring bar and contact Metav Werkzeuge for application guidance and prompt supply from Emmerich Technical data Article number: K110TM Designation ISO: S16Q SCLCR Model name: SCLC for CC-- Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 16 mm Total length: 180 mm Shank diameter: 20 mm Cutting height: 30 mm Weight: 0.317 kg Cutting angle: 95° Cutting direction: right-hand Special features For indexable inserts CC-- 09T3 Right-hand external boring bar configuration Compact, ISO-style shank Brand: Teknik Makina SKU: K110TM FAQ What insert type fits this tool holder? The holder is specified for CC-- 09T3 indexable inserts; using the correct insert size ensures proper seating and reliable cutting performance with the S16Q SCLCR boring bar. Is the bar suitable for use on CNC lathes? Yes, the S16Q SCLCR indexable-insert holder is designed for CNC and manual lathes where a right-hand external boring solution and ISO-style mounting are required. How does the shank diameter influence performance? A 20 mm shank diameter increases stiffness at the tool post, which reduces deflection and supports better dimensional accuracy during turning operations with this insert holder. Can this tool holder reduce setup time compared with brazed tools? Yes, the indexable design of this boring bar reduces downtime because worn inserts are replaced quickly without the need to change the whole tool, supporting higher machine availability. What cutting direction is this tool made for? This tool is configured for right-hand cutting, matching standard lathe orientations and conventional external turning procedures. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm SCLCR Right-Hand Boring Bar 200mm Overall Length, 20mm Shank Diameter - Teknik Makina
Benefit from the combination of precise indexable insert compatibility, a rigid shank and lightweight design for steady, repeatable turning results; order the tool directly via Metav Werkzeuge or consult our specialists for specification support. Teknik Makina Boring bar SCLC for CC-- Indexable Inserts (S16R SCLCR) — Right‑hand, Ø16 mm A Boring bar SCLC for CC-- Indexable Inserts engineered for right‑hand turning, with Ø16 mm diameter and 200 mm overall length in the ISO S16R SCLCR configuration ISO S16R SCLCR configuration Compatible with CC-- 09T3 inserts Right‑hand cutting, 95° cutting angle Ø16 mm diameter, overall length 200 mm Faster insert changes and consistent tool life The SCLC style toolholder is built around indexable inserts, which allow fast, cost‑effective edge renewal without regrinding. By using CC-- 09T3 inserts the system reduces downtime for insert changes and simplifies inventory of cutting edges. For workshops seeking predictable production cycles, the combination of a standard S16R SCLCR form and widely available inserts delivers reduced set‑up time and consistent cutting performance across batches. Stable clamping and improved surface quality Rigidity is central to reproducible machining. The bar's shank diameter 20 mm and compact Ø16 mm tool body minimise deflection under cut, while a 95° cutting angle supports secure insert seating and stable chip evacuation. At just 0.329 kg, the assembly is light enough for precise tool balance yet stiff enough to reduce chatter, improving surface finish and dimensional repeatability in turning operations where stability matters. Seamless fit into standard turning workflows Designed for right‑hand turning operations, this boring bar integrates with common lathe setups that accept the SCLC clamping style and CC-- insert family. The 200 mm overall length provides reach for a variety of external turning tasks while maintaining manageable overhang. For machinists who require clear specification data before purchase, the tool’s technical form factor and compatibility mean straightforward selection for routine maintenance and production environments. For precision turning tasks that demand reliable insert compatibility, order the Teknik Cutting Tools boring bar SCLC from Metav Werkzeuge or request personalised advice from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K111TM Manufacturer: Teknik Makina Product: Boring bar (SCLC for CC-- Indexable Inserts) ISO designation: S16R SCLCR Facts Diameter: 16 mm Overall length: 200 mm Shank diameter: 20 mm Cutting height: 30 mm Weight: 0.329 kg Cutting angle: 95° Cutting direction: Right Compatible inserts: CC-- 09T3 Special features For CC-- 09T3 indexable inserts SCLC for CC-- Indexable Inserts ISO S16R SCLCR format Right‑hand turning application FAQ Which inserts fit this boring bar? The boring bar is specified for CC-- 09T3 indexable inserts; the ISO S16R SCLCR form factor ensures secure clamping of these inserts. What are the key dimensions to consider for setup? Key dimensions are Ø16 mm diameter, shank diameter 20 mm, overall length 200 mm and a cutting height of 30 mm, as listed for the K111TM tool. Is the tool suitable for left‑hand machining? The tool is configured for right‑hand cutting; left‑hand operations would require the corresponding mirror configuration. How does the 95° cutting angle affect machining? A 95° cutting angle positions the insert to favour stable engagement and improved chip flow, which helps maintain surface finish and tool life under typical turning loads. Can this boring bar be balanced for high‑speed applications? The K111TM’s compact weight and geometry support easier balancing, but final balance must be verified in the specific machine and setup used. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm STFC Drill Bar for TCMT 1102 Indexable Inserts Right-Hand, 12mm Shank × 125mm Length - Teknik Makina
Take advantage of precise, repeatable clamping and compact dimensions to improve finishing passes and reduce tool change time; the combination of TCMT 1102 compatibility and a slim Ø12 mm shaft makes this a practical choice for tight setups. Order through Metav Werkzeuge or contact our consultants for application advice. S12K STFCR boring bar — STFC for TCMT indexable inserts, right-hand The S12K STFCR is a right-hand STFC boring bar designed to secure TCMT 1102 indexable inserts for reliable finishing and light turning operations. Right-hand cutting for predictable chip flow Fits TCMT 1102 indexable inserts Shaft Ø12 mm for compact setups Increased finishing reliability through secure clamping The slim boring bar is designed with an STFC clamping geometry that prioritises a firm seat for the insert, which reduces micro-movement under cutting forces. With a cutting angle of 90° and a dedicated clamp profile for TCMT 1102, the assembly delivers consistent contact between insert and holder; this improves surface finish and reduces scrap rates during finishing passes. The compact mass and balanced form help to suppress vibration, supporting higher productivity in repetitive turning operations. Compact design that simplifies machine setup A narrow shaft Ø12 mm combined with an overall diameter of Ø16 mm and 125 mm overall length allows installation in confined tool pockets and on multi-tool turrets where space is at a premium. The 25 mm cutting height ensures correct insert projection for standard tool geometries, while the light weight (approx. 0.118 kg) aids rapid tool changes and lowers inertial load on small spindles. These measurable attributes translate into shorter setup times and easier tool management on small- to medium-sized lathes. Practical benefits for everyday workshop tasks For machine shops focused on efficient finishing, this indexable insert holder supports repeatable results and straightforward logistics: the ISO designation S12K STFCR simplifies ordering and matching with compatible toolholders, and the right-hand orientation provides a conventional chip flow for standard turning strategies. Where process reliability matters, the boring bar helps maintain consistency across batches and fits well into a Metav-managed supply chain that emphasises availability and quality control. For application-specific advice on using this STFC boring bar with TCMT 1102 inserts contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability and delivery options. Technical data Article number: K160TM ISO designation: S12K STFCR Brand: Teknik Makina Facts Diameter: 16 mm Shaft diameter: 12 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.118 kg Cutting angle: 90° Cutting direction: Right-hand Special features For TCMT 1102 indexable inserts STFC clamping geometry Suitable for finishing operations SKU: K160TM FAQ Which inserts are compatible with this tool? The boring bar is compatible with TCMT 1102 indexable inserts; the STFC clamp is optimised to seat that insert type securely for finishing operations. What are the key dimensions to check before ordering? Check the Ø16 mm outer diameter, shaft Ø12 mm, and 125 mm overall length to ensure the boring bar fits the intended holder and turret pocket. Is the tool right- or left-hand oriented? This version is right-hand oriented, delivering chip flow and cutting direction consistent with standard right-hand turning operations for the S12K STFCR boring bar. How does the STFC clamping benefit machining results? The STFC clamping geometry provides repeatable insert positioning and improved stability, which helps reduce vibration and enhances surface finish during finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm STFC Holder For TCMT Indexable Inserts 25mm Cutting Height, Internal Coolant - Teknik Makina
Benefit from precise right-hand cutting, integrated internal coolant and secure seating for TCMT 1102 indexable inserts — engineered for consistent boring performance and reliable chip control. Order the tool directly via Metav Werkzeuge or contact our consultants for tailored advice and delivery. Boring Bar A25R STFCR — STFC Holder for TCMT Indexable Inserts (Teknik Makina) The Boring Bar A25R STFCR is a right-hand STFC toolholder designed for precision internal boring and finishing using TCMT 1102 indexable inserts in workshop and light industrial turning applications Right-hand cutting direction Internal coolant feed enabled Compatible with TCMT 1102 inserts Ø 16 mm outer diameter, 125 mm overall length Stability and repeatable precision in internal boring The holder delivers consistent concentricity thanks to its compact geometry and defined shank dimensions. With a 12 mm shank diameter and an effective outer diameter of 16 mm, the tool provides a stable connection to the toolpost, reducing vibration during finishing passes. This stability improves surface finish and lowers the risk of premature insert wear, which in turn supports predictable cycle times and fewer rework operations. The ISO designation A25R STFCR indicates a standardised interface for clamping and repeatable mounting in standard toolholders. Controlled coolant and chip evacuation for improved tool life Integrated internal coolant is routed directly to the cutting zone to aid heat dissipation and chip formation. When used with TCMT 1102 indexable inserts, the coolant reduces thermal loading on the insert corner and promotes controlled chip breaking, particularly on harder or abrasive materials. The 90° cutting angle combined with right-hand cutting direction gives an efficient cutting geometry for internal boring and light grooving, helping to maintain tool life and machining stability over longer production runs. Compatibility, workshop efficiency and straightforward handling Designed for straightforward integration into existing setups, the STFC-style holder accepts widely used triangular TCMT inserts and fits standard clamping systems. The compact 125 mm overall length and low mass (approx. 0.053 kg) make it suitable for tight bores and confined tool posts where balance and minimal overhang are important. Using standard indexable inserts simplifies inventory and reduces downtime: worn cutting edges are replaced quickly without regrinding, supporting more efficient shift patterns and predictable throughput. Contact Metav Werkzeuge today to discuss the A25R STFCR boring bar from Teknik Makina and arrange a precise supply or tailored technical consultation — Metav Werkzeuge, Emmerich; eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical data SKU: KA166TM Name: Boring bar / STFC for TCMT indexable inserts (STFC for TCMT Indexable Inserts) ISO designation: A25R STFCR eClass: 21180806 Core technical data Overall length: 125 mm Outer diameter: 16 mm Shank diameter: 12 mm Cutting height: 25 mm Weight: 0.053 kg Cutting angle: 90° Cutting direction: right Special features Compatible with TCMT 1102 indexable inserts Internal coolant feed STFC-style clamping for TCMT inserts Story trigger: bohrstange FAQ What insert type fits this holder? The holder accepts TCMT 1102 indexable inserts; the STFC clamping ensures secure seating and repeatable positioning for each indexed corner. Is internal coolant available on the tool? Yes — the A25R STFCR boring bar is supplied with internal coolant capability to deliver fluid directly to the cutting edge and improve heat control. What are the key dimensions to check for machine compatibility? Check the 16 mm outer diameter, 12 mm shank diameter and 125 mm overall length to ensure the tool fits the toolpost and the bore depth available. Which cutting direction is specified for this tool? The tool is configured for right-hand cutting, suitable for standard internal turning operations where right-hand feed is required. Can the tool be used for finishing passes in tight bores? Yes — the compact design and 90° cutting geometry make the tool suitable for controlled finishing passes in restricted internal spaces. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
16mm Thread Milling Bar For Inside Thread With Internal Coolant, For 11 IR Inserts - Teknik Makina
Take advantage of the combination of internal coolant, compatibility with 11 IR indexable inserts and compact dimensions for reliable, repeatable internal threading; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Gewindebohrstange K327-1TM — Internal thread boring bar, 16 mm diameter, internal coolant (Teknik Makina) The Gewindebohrstange K327-1TM is an internal thread boring bar intended for use with IR indexable inserts, providing a compact 125 mm overall length and integrated cooling for improved surface finish and tool life Internal coolant for controlled cutting conditions Fits 11 IR indexable inserts 16 mm diameter, 125 mm overall length Secured with Torx screw M2.5x5.5 and T8 key Deliver consistent internal threads with precise insert support The K327-1TM is engineered to support 11 IR indexable inserts, enabling consistent pitch and flank accuracy across repetitive internal-thread cycles. The 16 mm diameter shaft contributes to reduced deflection, which in turn increases repeatability and reduces rework. For operations where reproducible thread form matters, the combination of a rigid tool body and standardised insert geometry helps maintain machining tolerances throughout production runs. Reduced heat and improved insert life thanks to internal coolant and secure clamping Integrated internal coolant directs lubricant and coolant towards the cutting zone, which lowers cutting temperatures and improves chip evacuation. This controlled cooling extends tool life and helps achieve cleaner thread surfaces. The insert is held with a Torx screw M2.5x5.5 (requires T8 key), a familiar fastening method that offers secure clamping and straightforward replacement, shortening downtime during insert changes. Compact design for efficient workshop integration and predictable handling With an overall length of 125 mm and a 16 mm diameter, this boring bar occupies little space in tight bores while still delivering the necessary stiffness for internal thread generation. The tool is suitable for standard indexable-insert workflows and is simple to stock alongside other insert tooling. Specified dimensions and familiar fastening make the component easy to document in tool lists and predictable in setup times, supporting faster changeovers and consistent cycle planning. For reliable internal thread production with Teknik Makina tooling, contact Metav Werkzeuge for expert guidance and rapid supply from Emmerich — info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K327-1TM Manufacturer: Teknik Makina ECLASS: 21180806 Data Diameter: 16 mm Overall length: 125 mm For inserts: 11 IR Special features Internal coolant: yes Torx screw: M2.5x5.5 Torx key: T8 FAQ What insert type does this boring bar accept? The Gewindebohrstange K327-1TM is designed for 11 IR indexable inserts, allowing straightforward replacement and consistent thread geometry. Is the coolant internal or external? The tool provides internal coolant, which directs fluid to the cutting zone for improved cooling and chip control during internal threading. What are the key dimensions to consider for setup? Key dimensions are 16 mm diameter and 125 mm overall length; these determine rigidity and reach for bore preparation and threading. How is the insert secured in the tool? Insert clamping is achieved with a Torx screw M2.5x5.5, tightened or released using a T8 key for secure and repeatable fastening. Can this tool improve cycle times in serial production? Yes. The combination of a stiff 16 mm shaft, internal coolant and indexable inserts reduces interruptions and supports consistent thread quality, helping to streamline serial internal-thread machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm SIR S20P Drill Bar For 16 IR Indexable Inserts, Right-Hand, 20mm Shank - Teknik Makina
Benefit from a rigid, indexable solution that combines stable clamping with precise insert compatibility: a 19 mm cutting diameter paired with a 20 mm shank gives consistent machining results, while compatibility with 16 IR indexable inserts keeps tooling costs controllable. Order via Metav Werkzeuge or consult our specialists for application advice. SIR S20P boring bar K337-7TM by Teknik Makina — 19 mm cutting diameter, 20 mm shank A SIR S20P boring bar for right-hand turning, intended for use with 16 IR indexable inserts and machines accepting a 20 mm shank. Right-hand cutting for standard turning Fits 16 IR indexable inserts Shank Ø 20 mm for secure clamping Overall length 170 mm for extended reach Stable cutting for consistent surface finish The design focuses on delivering repeatable results in turning operations. The combination of a 19 mm cutting diameter and a 20 mm shank reduces deflection during cuts, which improves surface quality and dimensional stability on the workpiece. Using 16 IR indexable inserts means insert changes are fast and economical; the replaceable cutting edges maintain consistent geometry without the need for regrinding. This approach supports efficient cycle times and helps to lower total tooling costs over production runs. Secure clamping and straightforward maintenance Robust clamping is enabled by the shank size and the fastener system: the insert is secured with an M3.5x8.5 Torx screw, tightened using a T15 key, which ensures accurate seat contact and reliable torque transmission. The SIR S20P designation indicates the intended insert and holder interface, simplifying tool setup in the shop. With an overall length of 170 mm and a compact mass of 0.381 kg, the bar balances reach and rigidity, making maintenance and handling uncomplicated while preserving machining stability. Integration into machining workflows The bar is optimised for right-hand cutting applications and will suit conventional lathes and CNC turning centres that accept a 20 mm shank and IR-style inserts. Its ISO-related designation and standard fastening arrangement support compatibility with common indexable systems, so the tool can be introduced without complex adapter work. For operations requiring reliable insert changes and a predictable toolpath response, this turning bar provides a practical blend of accessibility and performance. For application-specific advice or to secure supply of the Teknik Makina SIR S20P boring bar (K337-7TM), contact Metav Werkzeuge in Emmerich for tailored guidance and reliable delivery — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: K337-7TM Manufacturer: Teknik Makina Designation: SIR S20P Description: SIR for IR Indexable Inserts Fits inserts: 16 IR Facts Diameter: 19 mm Shank diameter: 20 mm Cutting height: 40 mm Overall length: 170 mm Weight: 0.381 kg Torx screw: M3.5x8.5 Torx key: T15 Cutting direction: right Special features Fits 16 IR indexable inserts ISO designation: SIR S20P Clamp holder designation: IR16 Right-hand cutting Secure Torx fastening system FAQ Which inserts are compatible with this boring bar? The Teknik Makina SIR S20P boring bar (K337-7TM) is designed for 16 IR indexable inserts, using the standard SIR interface for reliable seating and repeatability. Is the tool right- or left-hand cutting? This boring bar is configured for right-hand cutting, suitable for conventional right-hand turning applications. What shank diameter is required for mounting? The bar has a 20 mm shank diameter, so it fits tool holders and turret stations that accept a 20 mm shank. How are the inserts secured and what torque tool is required? Inserts are fastened with an M3.5x8.5 Torx screw and the required key size is a T15, ensuring consistent clamp force and easy insert changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Thread Milling Shank For Internal Threads With Internal Coolant, 20mm Diameter - Teknik Makina
Take advantage of precise internal coolant control and a secure Torx clamping system to improve thread quality and reduce tool change time; the robust Ø20 mm bar with a TA060 clamping plate ensures consistent set-ups. Order the K327-4TM directly via Metav Werkzeuge or contact our consultants for application advice. K327-4TM Threading bar — internal threads with internal coolant, compatible with 16 IR inserts K327-4TM is a purpose-built threading bar for machining internal threads with IR indexable inserts, offering integrated coolant supply and standardised mounting for predictable workshop set-ups Internal coolant channel Designed for 16 IR indexable inserts Ø20 mm diameter, 170 mm overall length Torx screw M3.5x11, T15 key Controlled coolant for cleaner threads and longer tool life Integrated internal coolant directs cutting fluid precisely to the cutting edge, which improves chip evacuation and reduces built-up edge formation. This targeted cooling and lubrication results in more consistent thread profiles and contributes to extended tool life by lowering cutting temperatures and minimizing friction. For operations where chip control and surface finish matter, the central coolant feed offers a clear productivity advantage over external supply alone. Secure clamping for fast insert changes and reliable repeatability The bar is configured for 16 IR indexable inserts and uses a Torx fixing to ensure stable clamping during threading cycles. The Torx screw M3.5x11 and the matching T15 key provide straightforward, repeatable insert replacement with minimal downtime. The TA060 clamping plate design keeps insert seating consistent, which reduces setup variation and supports tight process tolerances when producing series or mixed-batch components. Standardised dimensions for straightforward set-up and alignment With a Ø20 mm shank and 170 mm overall length, the holder fits common turret and toolpost layouts while offering predictable overhang characteristics. The nominal dimensions simplify toolholder selection and make programme simulation and collision checks more reliable. The included pass shim BSP10 facilitates exact axial positioning during assembly, helping maintain thread concentricity and repeatable results across multiple machines. Practical workshop integration and maintenance tips The design focuses on ease of use in production environments: the combination of internal coolant and standardised fixing means fewer process interruptions and easier diagnostics when troubleshooting a thread quality issue. Spare Torx screws and the TA060 plate are simple to source, and routine checks of clamping torque on the Torx fixing maintain secure seating. For rigs that require modular tooling, this bar integrates cleanly into existing indexable-insert systems and tooling inventories. Contact Metav Werkzeuge for detailed application support, compatible insert recommendations and to reserve the K327-4TM threading bar; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: K327-4TM Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com Description: Threading bar for internal threads for IR indexable inserts Data Diameter: 20 mm Overall length: 170 mm Compatible insert size: 16 IR Torx screw: M3.5x11 Torx key: T15 Special features Internal coolant U-plate: TA060 Pass shim: BSP10 Compatible with IR indexable inserts FAQ What type of inserts are compatible with this holder? The holder is designed for 16 IR indexable inserts, ensuring correct seat geometry and secure clamping for internal thread machining. Does the tool provide coolant to the cutting zone? Yes, the K327-4TM features an internal coolant channel to deliver fluid directly to the insert cutting edge. Which Torx fixing is used for the insert clamping? Insert clamping uses a Torx screw M3.5x11 tightened with a T15 key for secure and repeatable clamping. What are the key mounting dimensions to check before fitting? Key dimensions are Ø20 mm shank diameter and 170 mm overall length; the pass shim BSP10 is provided for axial positioning. Can the clamping plate be replaced with other designs? The bar uses a TA060 clamping plate; replacements or compatible plates should match this specification to retain correct insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17mm Thread Milling Cutter for S12 S14 S21 S30 S40 Indexable Inserts, 85mm Overall Length - Teknik Makina
Take advantage of precise thread milling with a compact 17 mm cutting diameter and a robust 20 mm shank for stable machining. The secure Torx fastening (M2.5x7, T8) and compatibility with a wide range of indexable inserts ensure efficient changeovers and consistent thread quality. Order the unit directly via Metav Werkzeuge or ask our consultants for application advice. DC205TM Thread Milling Cutter — 17 mm diameter, 20 mm shank by Teknik Makina DC205TM is a thread milling cutter designed for machining threads with indexable inserts across a broad insert range for CNC applications Precision thread milling with indexable inserts 17 mm cutting diameter, 20 mm shank Secure Torx fastening M2.5x7, key T8 High-precision threading that increases process flexibility The thread milling concept used here enables flexible thread production on CNC machines with a single cutter body and replaceable indexable inserts. The compact 17 mm cutting diameter combined with a 20 mm shank offers a stable interface to the spindle while keeping tool overhang low, reducing vibration and improving thread accuracy. This approach reduces the need for multiple solid tools and supports quick adaptation to varying thread sizes without changing the machine setup. Fast insert changes and reliable clamping for uninterrupted production Designed for practical workshop operation, the cutter uses a standard Torx screw (M2.5x7) and T8 key to secure inserts, which simplifies maintenance and minimises downtime. The clamping arrangement provides consistent seat location and repeatable positioning of the replaceable cutting edges, translating into predictable tool life and easier inventory management. Quick, robust insert replacement contributes directly to improved uptime and a smoother production flow. Simple integration into existing tool systems and supply assurance Compatibility with a wide spectrum of indexable inserts (S12, S14, S21, S30 and S40) makes the cutter suitable for diverse machining strategies where modular tooling is preferred. The modular design supports cost-effective reconditioning of cutting geometry by replacing inserts rather than whole tools. For purchasing and logistical reliability, Metav Werkzeuge supplies controlled stock and technical advice, aligning product availability with pragmatic workshop needs. Request a technical consultation from Metav Werkzeuge to specify the Teknik Makina DC205TM thread milling cutter for the intended application and ensure optimal insert selection Technical data Article number: DC205TM Manufacturer: Teknik Makina SKU / UID: DC205TM Facts Diameter: 17 mm Overall length: 85 mm Shank diameter: 20 mm Compatible inserts: S12, S14, S21, S30, S40 Torx screw: M2.5x7 Torx key: T8 ECLASS: 21180805 ETIM: EC011860 Design & features Indexable inserts S14 indicated Compatibility with S12–S40 insert range Thread milling application FAQ Which insert sizes are compatible with this cutter? The DC205TM thread milling cutter is compatible with indexable inserts in the S12, S14, S21, S30 and S40 range, allowing flexible selection according to thread form and cutting conditions. What are the key dimensions for mounting the tool? Mounting requires a 20 mm shank interface and the cutter has a 17 mm cutting diameter with an overall length of 85 mm; these dimensions make the tool suitable for many standard CNC spindle interfaces. How are the inserts secured and which tool is needed? Inserts are secured by a Torx screw M2.5x7 using a T8 key; this provides repeatable clamping force and straightforward insert replacement in workshop conditions. Can this thread milling cutter replace tapping for certain applications? Yes, the modular cutter enables formable and non-formable thread production via milling strategies; it offers advantages where flexible thread pitch, interrupted surfaces or large blind holes make tapping impractical, and the DC205TM supports such scenarios with indexable inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm A12K SDUCL Tool Holder With Internal Coolant, 93° Cutting Angle - Teknik Makina
Benefit from a compact, precision‑oriented boring solution that combines internal coolant for reliable chip evacuation with compatibility for SDUC indexable inserts; order the KA252TM via Metav Werkzeuge or consult our specialists for suitability and delivery. KA252TM Boring Bar (A12K SDUCL) — SDUC for DC-- Indexable Inserts, Left‑hand The KA252TM boring bar is a left‑hand turning tool designed for secure insert clamping and controlled chip flow in medium‑duty CNC turning applications. Robust left‑hand cutting orientation Internal coolant for chip evacuation Compatible with DC-- 0702 SDUC inserts 16 mm shank, 180 mm overall length Consistent chip control for longer tool life The boring bar employs internal coolant directed to the cutting edge to improve chip evacuation and thermal control during interrupted or continuous cuts. With a 93° cutting angle, the geometry reduces radial cutting forces and diminishes vibration, which prolongs insert life and stabilises component tolerances. This pragmatic setup translates into fewer tool changes and more predictable cycle times on production runs. Predictable performance through standardised inserts Designed for the SDUC style of tooling and optimised for DC-- 0702 indexable inserts, the tool supports quick insert replacement and consistent cutting geometry. The standardised insert interface simplifies tooling logistics and reduces setup time on the machine. For operations where repeatability matters, the combination of SDUC mounting and standard insert sizes ensures uniform cutting behaviour across batches. Compact mounting with precise clamping for tight spaces The bar’s 16 mm shank and 180 mm overall length offer a compact footprint for applications with restricted overhang, while the raised cutting height of 40 mm provides reliable contact with the insert corner. The assembly’s low mass (0.267 kg) reduces centrifugal forces at higher spindle speeds and the specified clamp size 07 delivers a secure seat for the insert, maintaining concentricity and reducing runout risk. This compact configuration is suited to both prototype work and small‑batch production where accessibility and stiffness are essential. For bespoke advice on integrating the Teknik Makina KA252TM into existing tool holders or to request a delivery from Metav Werkzeuge, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants in Emmerich will advise on compatibility and logistics Technical Data Article number: KA252TM Manufacturer: Teknik Makina Designation: Boring bar (SDUC for DC-- indexable inserts) ISO designation: A12K SDUCL Core data Shank diameter: 16 mm Cutting height: 40 mm Diameter: 18 mm Overall length: 180 mm Weight: 0.267 kg Cutting angle: 93° Special features Internal coolant Left‑hand cutting direction Compatible inserts: DC-- 0702 Clamp size: 07 FAQ Which inserts fit this boring bar? The KA252TM is specified for DC-- 0702 indexable inserts in the SDUC format, providing a standardised insert seat for rapid replacement. Is coolant supplied through the bar? Yes — the tool features internal coolant to the cutting zone for improved chip control and heat management during machining. What operations is the tool intended for? This boring bar is intended for left‑hand turning and facing tasks where stable clamping and controlled chip evacuation are required. What are the key dimensions for mounting? Mounting requires a 16 mm shank connection and allows a compact 180 mm overall length, suitable for restricted overhangs. Which clamp or holder size is required? The tool is designed with a clamp reference of size 07 to ensure correct insert seating and repeatable clamping accuracy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm A12K SDUCR Drill Bar SDUC for DC-- Indexable Inserts 93° Right With Internal Coolant, 180mm Length - Teknik Makina
Combining precise right-hand cutting, internal coolant and compatibility with DC-- 0702 indexable inserts, this boring bar delivers stable chip control and repeatable bore quality in standard workshop and light industrial turning operations. Order the tool directly via Metav Werkzeuge or consult our advisors for application guidance. Boring bar A12K SDUCR (KA122TM) — SDUC for DC-- indexable inserts, internal coolant — Teknik Makina The Boring bar A12K SDUCR (KA122TM) is a right-hand, internally cooled boring bar designed for use with DC-- 0702 indexable inserts in precision turning and internal boring applications. Right-hand cutting with 93° approach angle Internal coolant for secure chip evacuation Compatible with DC-- 0702 indexable inserts Ø18 mm body, 16 mm shank, 180 mm overall length Consistent bore results through optimised cutting geometry The A12K SDUCR design combines a 93° approach angle with a defined cutting height to support controlled metal removal and dimensional repeatability. The specified cutting height of 40 mm and the 16 mm shank provide a rigid interface with standard toolholders, reducing deflection during interrupted cuts. For engineers this means fewer reworks and more predictable cycle times, as the geometry keeps the insert position stable and the cutting forces directed to minimise chatter. Coolant-fed machining for improved surface finish and tool life Built-in internal coolant feeds directly to the cutting zone, improving chip evacuation and reducing heat at the cutting edge. The directed coolant flow helps maintain a consistent cutting temperature, which in turn extends insert life and supports better surface integrity on the bore wall. For operations with moderate to high material removal rates, these benefits translate into longer intervals between insert changes and a steadier process window. Standardisation and simple workshop integration With the ISO-style designation A12K SDUCR and a compatibility listing for DC-- 0702 inserts, the bar fits established indexable-insert workflows and common clamping systems. The Ø18 mm body and 180 mm overall length make it suitable for many common holder configurations, while the listed clamping holder code supports rapid identification for replacement or inventory. This standardised approach reduces downtime during tool changes and simplifies stock management in mixed-production environments. For precise boring operations, choose Teknik Makina quality — order KA122TM through Metav Werkzeuge in Emmerich or contact our technical advisers at info@metav-werkzeuge.com or +49 2822 7131930 for application recommendations and compatibility checks Technical data Article number: KA122TM Manufacturer: Teknik Makina ISO designation: A12K SDUCR Type: SDUC for DC-- indexable inserts Facts Diameter: 18 mm Shank diameter: 16 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.267 kg Approach angle: 93° Cutting direction: Right Compatible insert size: DC-- 0702 Special features Internal coolant Right-hand machining Compatible with DC-- 0702 indexable inserts Clamping holder code: 07 FAQ Which indexable inserts fit this boring bar? The A12K SDUCR boring bar (KA122TM) is specified for use with DC-- 0702 indexable inserts and is designed to secure them in a SDUC-style pocket. Is the tool coolant-fed? Yes — internal coolant is integrated into the bar to support directed coolant flow to the cutting edge, improving chip evacuation and tool life for the A12K SDUCR. What cutting direction does the bar use? The bar is configured for right-hand cutting, which is standard for many turning and boring cycles and is reflected in the tool geometry. What are the key dimensions to check for holder compatibility? Key dimensions are Ø18 mm body diameter, 16 mm shank diameter and 180 mm overall length; these determine fitment with common holders and extension limits for KA122TM. What does the ISO designation A12K SDUCR indicate? The ISO-style code A12K SDUCR denotes the bar’s shank and head form and its suitability for SDUC-type indexable inserts, aiding standardised selection and replacement in workshop tool inventories. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm A14Q SCLCR Boring Bar Internal Coolant For CC-- 09T3 Indexable Inserts, 95° Cutting Angle - Teknik Makina
Gain stable, vibration‑reduced external turning through the combination of an 18 mm diameter and a rigid 16 mm shank, while the internal coolant ensures reliable chip control and consistent surface finish; order the KA108TM boring bar directly via Metav Werkzeuge or consult our specialists for application advice. KA108TM boring bar (A14Q SCLCR) — right‑hand, internal coolant, Ø 18 mm A boring bar (A14Q SCLCR) designed for right‑hand external turning with CC-- 09T3 indexable inserts, suited to general workshop and production use. Internal coolant for improved chip evacuation 18 mm diameter for rigid, stable cutting Right‑hand cutting orientation for standard setups Compatible with CC-- 09T3 indexable inserts Greater process stability from a compact, rigid design The compact 180 mm overall length combined with an 18 mm diameter and 16 mm shank provides high torsional stiffness for external turning operations. This increased rigidity reduces vibration and chatter, which in turn improves surface quality and extends tool life. For production environments where repeatability matters, the compact profile offers stable cutting without compromising access to confined workpieces. The measured weight of 0.267 kg contributes to easier handling when changing tools while remaining heavy enough for steady cutting performance. Cleaner machining and longer insert life through internal coolant Built‑in internal coolant supplies cutting fluid directly to the cutting zone, lowering edge temperature and aiding chip evacuation. This direct coolant feed is particularly beneficial where consistent cooling and effective chip control are required to prevent re‑cutting and heat damage. The tool’s 95° cutting angle and right‑hand orientation are optimised for conventional turning directions, helping to maintain predictable cutting forces and a controlled chip flow. The result is improved insert life and fewer interruptions for edge dressing or replacement. Flexible compatibility for efficient workshop integration The tool accepts CC-- 09T3 indexable inserts and carries the ISO designation A14Q SCLCR, simplifying procurement and replacement planning. Compatibility with common insert geometries reduces stocking complexity and allows quick insert changes to adapt to different materials or finish requirements. The combination of reliable coolant supply, standard insert format and compact dimensions makes this boring bar a cost‑efficient choice for small batches and routine production alike, enabling a consistent workflow without compromising on versatility. For technical selection and availability of the Teknik Cutting Tools KA108TM boring bar, contact Metav Werkzeuge to discuss application fitment and delivery options Technical data Article number: KA108TM Brand: Teknik Makina ISO designation: A14Q SCLCR Compatible inserts: CC-- 09T3 Dimensions & measurable values Diameter: 18 mm Shank diameter: 16 mm Overall length: 180 mm Cutting angle: 95° Weight: 0.267 kg Design & special features Cutting direction: right‑hand Internal coolant: yes Designation (secondary): SCLC for CC-- Indexable Inserts FAQ What insert type fits this boring bar? The KA108TM boring bar is compatible with CC-- 09T3 indexable inserts; the A14Q SCLCR geometry accepts this standard insert format for quick replacement. Is the coolant delivered to the cutting edge? Yes — the tool features internal coolant, which directs fluid to the cutting zone to aid cooling and chip evacuation and so prolong insert life. Which cutting direction is intended for this tool? This boring bar is configured for right‑hand cutting, matching standard turning machine setups and conventional feed directions. What are the key dimensions for machine setup? Key setup values are Ø 18 mm cutter diameter, 16 mm shank diameter and 180 mm overall length; these metrics support fixture and holder selection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Boring Bar for DCMT 0702 Indexable Inserts L150mm with Internal Coolant, A12-16M - Teknik Makina
Take advantage of the combination of compact diameter, reliable internal coolant and secure clamping for consistent bore quality and efficient workshop throughput — order the tool directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Boring Bar A12-16M, 18 mm with internal coolant — Teknik Makina The Boring Bar A12-16M is a compact drilling and boring tool designed for use with DCMT 0702 indexable inserts, suited to precision internal boring in small- to medium-sized engineering operations. 18 mm diameter for compact bores Internal coolant for secure chip evacuation 16 mm shank for stable clamping Compatible with DCMT 0702 indexable inserts Consistent concentricity for compact bores The A12-16M boring bar delivers stable clamping and reduced vibration through its 16 mm shank and compact construction, promoting repeatable concentricity in confined bores. With an outer diameter of 18 mm and a total length of 150 mm, the tool is engineered to keep runout low and to maintain insert position under cutting forces. This leads to fewer rejects and less rework, directly supporting throughput targets in production or toolroom environments. Improved process reliability with internal coolant Built-in internal coolant channels provide direct fluid delivery to the cutting zone, improving chip evacuation and temperature control. The result is a steadier cutting edge temperature, extended insert life and a reduced tendency for built-up edge. For operations that prioritise productivity, the internal coolant feature enables higher stable feed rates and contributes to longer tool life without compromising surface finish. Fast insert changes and secure fixation The tool is configured for DCMT 0702 indexable inserts and uses a Torx T8 key with an M2.5x5.5 Torx screw, simplifying insert replacement and minimising set-up time. The right-hand cutting orientation and a 95° cutting angle are chosen to suit common turning and boring operations, making the tool straightforward to integrate into existing programmes. Clear mechanical fixation reduces the need for frequent adjustments and supports predictable machining cycles. Practical handling and workshop compatibility Weighing only 0.187 kg and featuring a 40 mm insert pocket height, the boring bar balances rigidity with accessibility for manual handling and machine loading. The compact footprint and compatibility with standard DCMT 0702 inserts make the bar suitable for engineering workshops, maintenance shops and small-batch production. The model designation A12-16M and SKU KA514TM simplify inventory tracking and reordering within a centralised tool-management system. Contact Metav Werkzeuge for tailored advice on the Teknik Cutting Tools boring bar A12-16M (SKU KA514TM) and to discuss suitable inserts and clamping options — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: KA514TM Model: A12-16M Manufacturer: Teknik Makina Core dimensions Diameter: 18 mm Total length: 150 mm Shank diameter: 16 mm Cutting height: 40 mm Weight: 0.187 kg Cutting angle: 95° Special features Internal coolant Compatible with DCMT 0702 indexable inserts Right-hand cutting Torx key T8 Torx screw M2.5x5.5 Clamp holder width 11 mm FAQ What materials is this boring bar suited for? The boring bar A12-16M (Teknik Cutting Tools, SKU KA514TM) is intended for general internal boring applications using DCMT 0702 inserts; the specific material suitability depends on the insert grade chosen for the operation. How does the internal coolant benefit machining? Internal coolant on the KA514TM supplies coolant directly to the cutting edge, improving chip evacuation and thermal control, which helps to extend insert life and maintain consistent surface finish. Which insert type fits this tool? This bar accepts DCMT 0702 indexable inserts; the geometry supports a secure fit and efficient cutting when the correct insert grade and clearance are selected for the material. What fastening hardware is required for insert replacement? Insert fixation uses a Torx screw M2.5x5.5 operated with a Torx T8 key, enabling quick and secure insert changes on the boring bar. Can the bar be used on CNC lathes and manual machines? Yes, the compact design, 16 mm shank and 150 mm overall length of the A12-16M make it suitable for both CNC turning centres and manual lathes, provided the machine offers appropriate clamping and coolant supply. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Drill Bar for DCMT 0702 Indexable Inserts 150mm, Right-Hand 95° Cutting Angle - Teknik Makina
Benefit from compatibility with DCMT 0702 indexable inserts, an 18 mm diameter and a 150 mm overall length to achieve reliable, repeatable internal turning; order the K299TM directly via Metav Werkzeuge or consult our specialists for application guidance. Boring Bar S12-16M — for DCMT 0702 Indexable Inserts, 18 mm, L150 A Boring Bar S12-16M designed for use with DCMT 0702 indexable inserts, delivering stable right-hand cutting for precision internal turning and light to medium-duty production work Compatible with DCMT 0702 inserts 18 mm diameter for stable performance 150 mm overall length for extended reach Right-hand cutting, 95° cutting angle Stable insert system for predictable machining results The bar is engineered to accept DCMT 0702 indexable inserts, a widespread standard in turning operations that enables fast re-grading of cutting edges and consistent part quality. The combination of a standard insert size and a precise clamping arrangement reduces unplanned downtime and keeps cycle times low. For shops looking to standardise tooling across multiple machines, this solution supports efficient inventory management while maintaining process reliability. Balanced dimensions that combine reach with stiffness With an effective diameter of 18 mm, a shank diameter of 16 mm and a 150 mm overall length, the design balances reach and rigidity to reduce chatter and improve surface finish. The 95° cutting angle delivers accessible cutting geometry for internal operations, while a cutting height of 40 mm ensures proper insert seating and contact. This configuration is suitable for applications where moderate reach is required without sacrificing stability, making it a practical choice for mixed-shop workflows. Fast, repeatable clamping for reduced maintenance time The insert is secured using a Torx system (Torx T8) with a M2.5x5.5 fastening screw, providing a standardised and secure clamp that simplifies insert changes and torque control. Using a recognised Torx key reduces the risk of screw damage and ensures repeatable clamping force, which protects the insert seat and extends component life. The straightforward fastening concept supports quick servicing routines and predictable tool performance. Practical advantages for production and craft workshops Supplied by Teknik Makina and identified by ISO designation S12-16M, this bar is a compact, lightweight option (approx. 0.187 kg) that integrates easily into established tool sets. The consistent geometry and compatibility with DCMT inserts make it suitable for small-batch work, prototype runs and serial production where repeatability matters. Choosing such standardised components contributes to leaner tooling inventories and smoother shop-floor logistics. For fast supply and expert advice on integrating Teknik Makina tooling into existing processes, contact Metav Werkzeuge for tailored recommendations and reliable delivery from Emmerich. Technical data Article number: K299TM Label: 18 mm Boring bar DCMT 0702 L150mm Product type: Boring bar Manufacturer: Teknik Makina Dimensions & weights Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 40 mm Weight: 0.187 kg Cutting angle: 95° Clamp head width: 11 mm Features & compatibility Compatible with DCMT 0702 indexable inserts ISO designation: S12-16M Cutting direction: right Torx key: T8 Torx screw: M2.5x5.5 SKU: K299TM Brand: Teknik Makina FAQ Which inserts fit this bar? The K299TM boring bar is designed for DCMT 0702 indexable inserts and secures them with the specified Torx screw Is the cutting orientation right-hand or left-hand? This boring bar is configured for right-hand cutting, compatible with standard right-hand turning setups What are the key dimensions to check for machine compatibility? Check the 18 mm diameter, shank diameter 16 mm and 150 mm overall length to ensure adequate clearance and clamping on the toolpost Which fastening tool is required for insert changes? Insert clamping uses a Torx T8 key with a M2.5x5.5 screw for repeatable torque and secure seating How does the S12-16M designation affect selection? The S12-16M ISO designation identifies the bar geometry and mounting interface, helping to match it with holders and machine tool setups Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Drill Bar for DCMT 0702 Indexable Inserts L150mm Internal Cooling, 95° Left Cut - Teknik Makina
Take advantage of a compact, left-hand boring bar that combines internal coolant and an 18 mm cutting diameter for consistent bore quality; order the KA518TM directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar A12-16M — 18 mm, internal coolant (Teknik Makina) The boring bar A12-16M for DCMT 0702 indexable inserts is designed for precise left-hand turning and internal coolant operations in production and job-shop environments Internal coolant for consistent tool cooling 18 mm cutting diameter for precise bore sizing 150 mm overall length with 16 mm shank diameter Left-hand cutting, 95° cutting angle compatibility Consistent bore quality through defined geometry and insert compatibility The A12-16M toolholder is engineered to deliver repeatable internal turning performance by pairing a defined 18 mm diameter with a stable tool geometry. Compatible with DCMT 0702 carbide indexable inserts, the design and the 95° cutting angle reduce radial deflection and help maintain tolerances over serial runs. This results in improved cylindricity and surface finish compared with loosely specified alternatives, translating into fewer reworks and predictable cycle times on CNC lathes and turning centres. Controlled heat and chip evacuation for longer insert life Built-in internal coolant directs cooling and lubrication to the cutting zone, which lowers cutting temperatures and flushes chips away from the insert pocket. That targeted coolant supply extends insert life and stabilises cutting forces, so the production process benefits from reduced thermal expansion and steadier tool engagement. For operations where built-up edge or heat-related flank wear is a concern, the internal coolant function supports higher sustained productivity and a consistent part finish. Compact design for secure clamping and easy handling A 16 mm shank combined with a 150 mm overall length delivers a compact package that balances reach with rigidity. The small mass (approx. 0.187 kg) shortens tool-change cycles and reduces spindle load, while the 11 mm clamping head width ensures secure insert retention. Fast, reliable assembly is achieved with the supplied Torx hardware—Torx T8 key and M2.5×5.5 screw—minimising downtime during index and insert changes and helping to maintain concentricity under operational loads. Suitable for production turning where left-hand orientation is required Left-hand cutting orientation is specified where the machining process or machine setup demands it; this tool’s left-hand configuration matches such setups and prevents the need for workpiece re-fixturing. The KA518TM is therefore well suited for niche turning tasks, secondary operations and retrofit tool stations where DCMT 0702 inserts are already in use. For workshops aiming to standardise tooling across multiple machines, this compact, coolant-fed toolholder offers a pragmatic balance of accessibility and machining performance. Contact Metav Werkzeuge for tailored advice on the Teknik Makina KA518TM boring bar with internal coolant and to discuss suitable insert grades and cutting parameters Technical data Article number: KA518TM Product type: Boring bar ISO designation: A12-16M Manufacturer: Teknik Makina Facts Diameter: 18 mm Overall length: 150 mm Shank diameter: 16 mm Cutting height: 40 mm Weight: 0.187 kg Cutting angle: 95° Clamping head width: 11 mm Screw: M2.5×5.5 Torx key: T8 Special features Compatible with DCMT 0702 indexable inserts Internal coolant Left-hand cutting Label: 18 mm boring bar DCMT 0702 L150 mm with internal coolant SKU: KA518TM Manufacturer: Teknik Cutting Tools FAQ What insert type fits this tool? The tool accepts DCMT 0702 indexable inserts; the holder is specified to work with that insert geometry for predictable cutting results. Is the tool coolant-fed? Yes — the KA518TM features internal coolant to supply lubricant directly to the cutting zone and aid chip evacuation. Which cutting orientation does the bar support? This holder is configured for left-hand cutting, suitable for setups that require counter-clockwise tool engagement. What are the key mounting and fastening details? Secure clamping is provided via the included M2.5×5.5 screw and is tightened using a Torx T8 key for repeatable insert retention. What shank and overall dimensions should be considered for machine setup? Important dimensions: 16 mm shank diameter and 150 mm overall length; these determine clamping requirements and reach on the machine. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm S12K SDZCR 5° Indexable Drill Bar For DC-- 0702, 125mm Overall Length - Teknik Makina
Take advantage of the combination of a precise 5° cutting angle, compatibility with DC-- 0702 indexable inserts and compact dimensions for stable, high-quality turning; order the tool via Metav Werkzeuge or consult our specialists for integration advice. S12K SDZCR Boring Bar – 5° for DC-- 0702 indexable inserts, Ø18 mm, shaft Ø12 mm The S12K SDZCR is a right-hand boring bar designed for internal turning with DC-- 0702 indexable inserts, suitable where compact length and repeatable clamping are required for precision machining. 5° cutting angle for fine finishing Compatible with DC-- 0702 indexable inserts Ø18 mm body with 125 mm overall length Shaft Ø12 mm for secure clamping Consistent finish and dimensional control for precision turning The boring bar delivers a controlled cutting geometry thanks to its 5° cutting angle, which reduces cutting forces and improves surface quality on internal bores. The ISO designation S12K SDZCR identifies the toolholder form and ensures compatibility with industry-standard clamping systems. With a body diameter of Ø18 mm and a shaft diameter of 12 mm, the holder offers a compact footprint that supports tight-tolerance operations without sacrificing rigidity. Explanation of terms is straightforward: indexable inserts are replaceable cutting tips (here: DC-- 0702) that allow rapid renewal of the cutting edge without regrinding, reducing downtime and maintaining repeatable results. Greater uptime through stable clamping and prolonged tool life Built for repeatable setups, the toolholder’s geometry and secure shaft Ø12 mm clamping reduce vibration and minimise insert wear, contributing to long tool life and predictable tool-change intervals. The combination of a short 125 mm overall length and the lightweight construction (approx. 0.128 kg) makes the holder easy to mount and balances well in many turret arrangements. For workshops aiming to increase productivity, this translates into fewer interruptions and more reliably achieved cycle-time targets. Where higher surface quality is required, the right-hand cutting orientation and the modest 5° lead angle contribute to stable chip formation and consistent finishing performance. Practical integration into existing tooling systems Compatibility with DC-- 0702 indexable inserts simplifies inventory management: the same insert family can be used across several toolholders, reducing spare-part complexity. The right-hand cutting direction aligns with standard lathe configurations and the S12K ISO form ensures predictable seating and clamping behaviour. For operators with limited exposure to cutting tool nomenclature, the essential facts are: compact diameter, short overall length and standard insert interface — features that make fitting, orientation and commissioning intuitive even under time pressure. Suitable applications and workshop benefits This boring bar is aimed at production and maintenance environments requiring reliable internal turning on steel and similar materials where standard DC-- 0702 inserts are effective. The compact design supports work on smaller bores and confined turret spaces, while the conservative geometry prioritises finish over aggressive stock removal. As part of a tooling strategy, this holder helps reduce the number of bespoke tools needed, supporting Metav’s philosophy of accessible precision and centralised supply from Emmerich: reliable, repeatable tools that suit industry and craft. Contact Metav Werkzeuge for tailored advice on integrating the Teknik Cutting Tools S12K SDZCR boring bar into an existing tool carousel and to confirm insert selection and clamping options Technical Data SKU: K190TM ISO designation: S12K SDZCR Manufacturer: Teknik Cutting Tools Diameter: 18 mm Shaft diameter: 12 mm Overall length: 125 mm Cutting height: 20 mm Weight: 0.128 kg Cutting angle: 5° Cutting direction: right Special features For indexable inserts DC-- 0702 Short, rigid design for confined spaces Lightweight for easy handling Right-hand boring bar configuration FAQ What inserts fit this boring bar? The S12K SDZCR boring bar accepts DC-- 0702 indexable inserts; these standard inserts allow rapid edge renewal and consistent machining performance. Is the tool suitable for use on standard lathes? Yes, the S12K SDZCR is a right-hand boring bar designed for conventional lathe turrets and cartridge-style toolholders that accept ISO‑form boring bars. What are the key dimensions to check before ordering? Confirm the Ø18 mm body, shaft Ø12 mm, and 125 mm overall length against turret clearance and bore reach requirements to ensure correct fit and clamping. How does the 5° cutting angle affect machining? The 5° angle reduces cutting forces and improves surface finish by promoting stable chip flow, making it well suited to finishing passes and applications demanding good surface quality. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm S14Q SDUCL Boring Bar SDUC for DC-- Indexable Inserts, Left Hand 180mm - Teknik Makina
Take advantage of a rigid, precision-engineered boring solution that combines an 18 mm diameter body, compatibility with DC-- 0702 SDUC indexable inserts and a left-hand cutting orientation for predictable chip flow; order directly via Metav Werkzeuge or consult the Metav team for application advice. S14Q SDUCL Boring Bar — left-hand, 18 mm, for SDUC / DC-- 0702 indexable inserts (Teknik Makina) S14Q SDUCL is a purpose-designed boring bar for internal turning operations that accepts SDUC-type indexable inserts and is optimised for left-hand cutting applications Left-hand cutting for specific machining tasks Compatible with DC-- 0702 SDUC indexable inserts 93° cutting angle for reliable chip control Solid 18 mm diameter with 180 mm overall length Stable tooling for consistent internal machining results The S14Q SDUCL is engineered with a focus on rigidity and repeatable geometry. With a nominal 18 mm outer diameter and a 16 mm shank diameter, the component is designed to maximise clamping stability while fitting common toolholders. The 180 mm overall length balances reach with torsional stiffness, so that vibration is minimised and dimensional consistency is promoted across batch runs. These measurable attributes allow machining parameters to be set with confidence and make the tool suitable for workshops that require reproducible bore quality. Economical, precise cutting using indexable inserts This bar is intended for insert-based cutting, accepting SDUC indexable inserts in the DC-- 0702 format. The 40 mm cutting height and 93° cutting angle are chosen to support effective engagement and chip control, particularly in interrupted cuts or when working close to shoulders. Left-hand orientation supports specific toolpaths and lathe setups where the feed direction is reversed. Using indexable inserts ensures rapid edge replacement and consistent cutting geometry, reducing setup time while sustaining cutting performance. Practical benefits for workshop productivity and tool selection The tool’s ISO-style designation and straightforward geometry simplify selection and inventory management. The S14Q SDUCL format is widely recognisable in tooling systems, which helps streamline procurement and replacement. At a measured weight of 0.266 kg, handling and tool change are uncomplicated during setup. Overall, the configuration supports predictable tool life and efficient maintenance routines, delivering operational stability for small to medium-sized production batches. For precision internal turning tasks, rely on Teknik Makina’s S14Q SDUCL boring bar—contact Metav Werkzeuge for technical guidance or to confirm compatibility with existing holders via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: K254TM Manufacturer: Teknik Makina ISO designation: S14Q SDUCL Description: SDUC for DC-- indexable inserts Facts Diameter: 18 mm Shank diameter: 16 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.266 kg Cutting angle: 93° Cutting direction: left Special features For SDUC indexable inserts Compatible with DC-- 0702 inserts Left-hand cutting orientation ISO-style boring bar designation FAQ Which inserts are compatible with this boring bar? The S14Q SDUCL boring bar by Teknik Makina is designed for SDUC indexable inserts in the DC-- 0702 size. Is the cutting direction left-hand or right-hand? This tooling is specified for left-hand cutting operations and is supplied accordingly. What are the key dimensions to check for holder compatibility? Check the 18 mm outer diameter, 16 mm shank diameter and 180 mm overall length when matching toolholders for the Teknik Makina S14Q SDUCL (SKU K254TM). How does the 93° cutting angle affect machining? The 93° cutting angle improves chip deflection and supports stable engagement, which is beneficial for consistent bore finishes with the S14Q SDUCL boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm S14Q SDUCR Boring Bar For DC-- 0702 Indexable Inserts, Right Hand 93° 180mm - Teknik Makina
Combining a 16 mm shank for rigid clamping with compatibility for DC--0702 indexable inserts and a 93° cutting angle results in stable, repeatable internal turning performance; order directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. Boring bar S14Q SDUCR – SDUC indexable holder for DC--0702 inserts, right-hand, 16 mm shank (Teknik Makina) The Boring bar S14Q SDUCR is a right-hand SDUC insert holder designed for accurate internal turning where repeatable insert seating and rigid clamping are required 16 mm shank for rigid clamping Compatible with DC--0702 indexable inserts 180 mm overall length for deep bore reach Right-hand cutting with 93° cutting angle Stable clamping that reduces vibration and improves finish A robust 16 mm shank and compact tool mass of 0.266 kg combine to provide increased rigidity during internal turning operations. The reduced deflection achieved by the larger shank diameter supports consistent chip formation and an improved surface finish on bores. The combination of the 18 mm diameter and the tool’s geometry helps to maintain concentricity, while the 93° cutting angle provides the required clearance for many internal turning tasks. Vibration damping and stable seating are thereby promoted, extending insert life and lowering scrap rates. Efficient insert system for fast, repeatable tool changes The SDUC configuration accepts DC--0702 indexable inserts and is engineered for precise, repeatable seating. The insert pocket geometry is optimised to ensure correct positioning on every fitment, so that tool offsets remain stable after each replacement. The indexable insert system reduces downtime compared with brazed tools since inserts can be rotated or exchanged quickly, and re-establishing cutting parameters is straightforward. This holder is identified as S14Q SDUCR, reflecting its SDUC-style compatibility and right-hand cutting orientation for standard turning cycles. Practical design for workshop and production workflows With an 180 mm overall length and a cutting height of 40 mm, the holder offers reach for deeper bores while keeping overhang manageable for better stability. The compact weight and standard shank size simplify integration into existing tool turrets and adaptors, reducing setup time on tool posts. For repetitive production environments the reduced handling time and consistent seating of inserts contribute directly to higher uptime and predictable machining results. The holder’s clear specification supports process planning and tool inventory management in both jobbing shops and production cells. For application advice, insert selection or to secure stock of the Teknik Makina S14Q SDUCR (SKU K124TM), contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for rapid, expert support and supply coordination Technical Data Article number: K124TM Manufacturer: Teknik Makina Model designation: S14Q SDUCR Compatible inserts: DC-- 0702 Cutting direction: right Facts Shank diameter: 16 mm Diameter: 18 mm Cutting height: 40 mm Overall length: 180 mm Weight: 0.266 kg Cutting angle: 93° Special features SDUC indexable insert holder Right-hand cutting orientation Designed for DC--0702 indexable inserts ISO designation: S14Q SDUCR Clamping holder reference: 07 FAQ Which indexable inserts fit this holder? The holder is compatible with DC--0702 indexable inserts; the SDUC pocket geometry is designed for secure seating of these inserts. What are the key dimensions for mounting and planning? Shank diameter is 16 mm, overall diameter 18 mm, cutting height 40 mm and overall length 180 mm, as specified for the S14Q SDUCR (SKU K124TM). Is this tool for right-hand or left-hand cutting? This boring bar is configured for right-hand cutting and is marked accordingly in the technical specification. How does the SDUC design benefit production? The SDUC insert pocket ensures repeatable positioning and quick insert changes, reducing downtime and maintaining consistent cutting offsets for series production. What is the ISO designation and who manufactures the tool? The ISO designation is S14Q SDUCR and the tool is supplied by Teknik Makina (SKU K124TM). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm S14Q SDUCR Drilling Bar SDUC For DC-- Indexable Inserts 93° Cutting Angle, 16mm Shank - Teknik Makina
Take advantage of the stable geometry and compact dimensions for consistent external turning results; the combination of a 16 mm shaft and 45 mm cutting height provides a reliable balance between rigidity and accessibility. Order via Metav Werkzeuge or contact the technical team for matching insert options and cutting parameters. S14Q SDUCR Boring Bar – SDUC for DC-- indexable inserts, 180 mm overall length (Teknik Makina) The S14Q SDUCR is a right-hand external turning boring bar designed for use with DC-- 11T3 indexable inserts, suitable for precision turning tasks in machining centres and lathes. ISO S14Q SDUCR designation For DC-- 11T3 indexable inserts Shaft diameter 16 mm Overall length 180 mm Greater rigidity for stable turning and repeatable results The boring bar's configuration focuses on delivering stable cutting through a compact, stiff setup. A shaft diameter of 16 mm combined with an overall length of 180 mm reduces deflection during external turning operations, improving dimensional repeatability and surface finish. For practical machining, the 45 mm cutting height ensures correct insert seating and chip control; this translates into fewer reworks and a more predictable process window, especially when working with standard turning tasks on medium-duty lathes. Fast insert interchange and compatibility to keep cycles moving Designed for SDUC-style tooling, the bar accepts DC-- 11T3 indexable inserts with a straightforward clamping seat and a clamping holder designation of 11, enabling quick replacements and reduced downtime. The right-hand cutting orientation and the ISO S14Q SDUCR form make it straightforward to match the toolholder to existing tool posts and turret stations. As a result, set-up and changeover times are minimised, which supports higher spindle utilisation and a more efficient production schedule. Clear specifications for process planning and tool selection Numerical values are provided so buyers can plan feeds, speeds and holder compatibility unambiguously: cutting angle 93°, bar diameter 18 mm, and a net weight of 0.272 kg. These measurable parameters allow process engineers to calculate stiffness, select appropriate insert grades and determine whether the bar is suited to light finishing or general turning. Using these figures in toolpath simulations or fixture checks reduces trial-and-error on the shopfloor and improves first-off quality. Built for workshop integration and inventory clarity The bar’s compact footprint and standard ISO designation make it easy to catalogue and replenish. The combination of an established ISO code and clear insert family reduces the risk of ordering mistakes and ensures compatibility with common insert geometries. For procurement, the concise technical details support just-in-time restocking and predictable maintenance cycles, which is especially valuable where a single supplier is preferred for consistency and traceability. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools S14Q SDUCR boring bar with SDUC for DC-- indexable inserts can be integrated into existing turning processes; Metav Werkzeuge in Emmerich can provide technical advice and match the correct insert grade for the application. Technical data Article number: K125TM Designation: S14Q SDUCR Product name: Boring bar (SDUC for DC-- indexable inserts) Manufacturer: Teknik Makina Facts Shaft diameter: 16 mm Cutting height: 45 mm Diameter: 18 mm Overall length: 180 mm Weight: 0.272 kg Cutting angle: 93° Cutting direction: Right-hand eClass: 21180806 Special features For indexable inserts DC-- 11T3 Clamping holder designation: 11 ISO designation: S14Q SDUCR SKU: K125TM FAQ Which insert type fits this boring bar? The bar is designed for DC-- 11T3 indexable inserts and seats SDUC-format inserts for secure clamping and correct chip flow with the S14Q SDUCR tool. Is the cutting direction right- or left-hand? This tool is a right-hand external turning bar, intended for conventional right-hand turning operations. What are the key dimensions to check for fitting a toolholder? Important dimensions are shaft diameter 16 mm, overall length 180 mm and the bar diameter 18 mm, which should be matched to the holder and turret pocket. Can this bar be used for finishing passes? With its compact geometry and a 45 mm cutting height, the bar is suitable for general turning and finishing where rigidity and correct insert geometry meet the process requirements. What is the article number for ordering and inventory? Order or reference the product using SKU K125TM, listed under the ISO code S14Q SDUCR. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm SCLC Boring Bar For CC-- 09T3 Indexable Inserts, Left-Hand 95° Cut Angle, Internal Coolant - Teknik Makina
Take advantage of a compact, workshop-ready solution that combines internal coolant capability, secure clamping and compatibility with CC-- 09T3 indexable inserts for efficient internal machining; order directly via Metav Werkzeuge or consult the Metav team for application guidance. Boring bar KA238TM — SCLC for CC-- 09T3 indexable inserts, 16 mm shank (Teknik Cutting Tools) The Boring bar KA238TM is a left-hand SCLC-style tool designed for precision internal turning with internal coolant and secure clamping for CC-- 09T3 indexable inserts. Internal coolant supply for clean chip evacuation Compatible with CC-- 09T3 indexable inserts 16 mm shank for stable toolholding 180 mm overall length for deep internal reach Precision internal turning with built-in coolant for consistent finishes The bar is engineered for repeatable internal machining thanks to its internal coolant channel that directs cutting fluid close to the cutting edge, reducing heat and improving chip control. The tool accepts CC-- 09T3 inserts, a common blank size that facilitates quick reconditioning and predictable cutting geometry. With a 16 mm shank and a 95° cutting angle, the design prioritises dimensional stability and surface quality, enabling reliable bore finishes even in batch production or CNC turning centres. Secure clamping and quick insert changes to reduce cycle times Clamping is handled via the designated holder arrangement and a precisely dimensioned screw, with a Torx screw M3.5x8.5 and matching T15 key for repeatable tightening. The clamp holder 09 format and a 45 mm cutting height simplify insert seating and replacement, which reduces downtime during tool swaps. The combination of mechanical repeatability and clear torque interface ensures consistent tool projection and run-out control, supporting shorter set-up times and fewer scrap parts. Compact geometry for deep reaches and controlled cutting action A compact overall length of 180 mm overall length combined with an 18 mm diameter cutting head offers deep access without excessive overhang, improving rigidity compared with longer alternatives. The left-hand cutting configuration provides predictable chip flow for specific turning directions and fixture layouts, while the SCLCL-style body supports standard clamping systems. Built for workshops and production environments, the bar balances reach and stiffness to help maintain cutting parameters and extend insert life. For technical specification checks or ordering of Teknik Cutting Tools' KA238TM boring bar, contact Metav Werkzeuge for tailored advice and supply from Emmerich: eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA238TM Manufacturer: Teknik Cutting Tools ISO designation: A14-A16Q SCLCL Key figures Diameter: 18 mm Shank diameter: 16 mm Overall length: 180 mm Cutting height: 45 mm Weight: 0.27 kg Cutting angle: 95° Cutting direction: left Torx screw: M3.5x8.5 Torx key: T15 Special features Internal coolant supply For indexable inserts CC-- 09T3 Clamp holder designation 09 SCLCL tool body style FAQ Which insert type is compatible with this boring bar? The KA238TM is compatible with CC-- 09T3 indexable inserts; this pairing ensures correct seating and cutting geometry for internal turning operations. Is the tool suitable for internal coolant use? Yes, the bar features internal coolant to direct fluid to the cutting edge, improving chip evacuation and temperature control during machining. What is the shank diameter and how does it affect rigidity? The 16 mm shank provides a compact but rigid interface for standard toolholders, helping to reduce vibration and enhance accuracy in bore machining. Can the bar be used for right-hand cutting? This specific model is specified as left-hand cutting; right-hand cutting applications require the corresponding right-hand version. What fastening hardware is required for insert changes? Insert clamping uses a Torx screw M3.5x8.5 secured with a T15 key, allowing repeatable torque and quick insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm SCLC Left-Hand Indexable Boring Bar 16mm Shank 180mm Overall Length, 95° Rake Angle - Teknik Makina
Reliable left‑hand machining performance is provided by the S14Q SCLCL drill bar with a 16 mm shank and a 95° cutting angle; compatible with CC-- 09T3 indexable inserts, it combines rigidity and accessibility for compact internal turning tasks. Order the tooling via Metav Werkzeuge or consult their specialists for application advice. Drill Bar SCLC for CC-- Indexable Inserts — S14Q SCLCL, 16 mm shank | Teknik Makina The Drill Bar SCLC for CC-- Indexable Inserts is a left‑hand internal boring solution designed for precision turning and tight‑access operations, compatible with CC-- 09T3 indexable inserts. Left-hand cutting orientation Compatible with CC-- 09T3 inserts 16 mm shank diameter for secure clamping Precise left‑hand internal turning for constrained bores The left‑hand configuration and the 95° cutting angle provide a practical advantage when machining asymmetrical or constrained workpieces, allowing cleaner approach paths and safer tool entry in reverse‑direction operations. As a robust boring solution, this bar accepts standard CC-- 09T3 indexable inserts, which permit fast edge changes and consistent cutting geometry. The combination of a defined cutting angle and insert compatibility leads to more predictable chip control and repeatable bore quality, reducing rework and improving production throughput. Reduced deflection through compact dimensions and secure clamping A 16 mm shank with a relatively short overhang supports high rigidity and lowers vibration during cutting, which directly benefits surface finish and dimensional accuracy. With an overall length of 180 mm, the design balances reach and stiffness for internal turning on small to medium lathes and machining centres. The low mass (approx. 0.271 kg) further limits inertial forces during rapid direction changes, while the ISO designation S14Q SCLCL clarifies the mounting and orientation for straightforward set‑up. These measurable dimensions serve as a reliable basis for fixture planning and ensure consistent clamping behaviour under industrial conditions. Faster indexable insert changes and production reliability The S14Q SCLCL toolholder is engineered for routine production: it uses standard indexable inserts that shorten downtime and lower tooling costs through multiple usable cutting edges. The clear compatibility with CC-- 09T3 inserts means spare parts are widely available, simplifying inventory management. For shops seeking a balance between accessibility and repeatable performance, the combination of a compact boring bar and indexable inserts delivers improved cycle times and easier quality control. If material hardness or specific geometries require confirmation, technical guidance is available to match insert grades and cutting data to the application. For reliable left‑hand internal turning solutions from Teknik Makina, contact Metav Werkzeuge for tailored recommendations or to order the S14Q SCLCL (SKU K238TM) — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K238TM Manufacturer: Teknik Makina Designation: SCLC for CC-- Indexable Inserts (S14Q SCLCL) Compatible inserts: CC-- 09T3 Cutting direction: left Facts Shank diameter: 16 mm Cutting height: 45 mm Cutting angle: 95° Overall length: 180 mm Diameter: 18 mm Weight: 0.271 kg Special features ISO designation S14Q SCLCL Left‑hand version Clamp size: 09 Intended for indexable insert mounting Brand: Teknik Makina FAQ What inserts fit this boring bar? The boring bar accepts CC-- 09T3 indexable inserts; the S14Q SCLCL holder is configured to secure and locate these standard inserts reliably for consistent cutting geometry. Is this tool suitable for left‑hand internal turning on small lathes? Yes. The left‑hand orientation and the 16 mm shank make the bar appropriate for compact setups where a shorter overhang and secure clamping improve stability. What does the ISO designation S14Q SCLCL indicate? The ISO code describes the holder style and mounting arrangement; S14Q SCLCL identifies the toolholder geometry and orientation used to seat CC-- 09T3 inserts correctly. How does the 95° cutting angle affect machining? A 95° cutting angle provides a near‑radial approach that helps with chip formation and edge engagement in internal turning, supporting repeatable bore quality and effective chip evacuation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Thread Milling Cutter for S21 Indexable Inserts, M4x10 Torx Screw - Teknik Makina
Take advantage of a modular indexable design, precise Ø 18 mm cutting diameter and a robust 20 mm shank for steady clamping and efficient thread milling; order the tool directly via Metav Werkzeuge or consult our specialists for application-specific advice. Thread Milling Cutter DC206TM — for S12, S14, S21, S30 and S40 Indexable Inserts (Ø 18 mm, 20 mm shank) — Teknik Makina The Thread Milling Cutter DC206TM is a CNC-capable thread milling tool intended for industrial metalworking, optimised for indexable inserts and reliable multi-pass thread generation. Modular indexable design for cost-effective regrinds Suited to S12–S40 insert formats 20 mm shank for stable clamping Ø 18 mm diameter, 85 mm overall length Increased productivity through replaceable inserts and stable clamping The cutter combines a replaceable-insert concept with a substantial 20 mm shank, which improves spindle engagement and reduces vibration during thread generation. Using indexable inserts eliminates the need to regrind the whole tool, so maintenance downtimes are shorter and running costs are lowered. Designed for industrial environments, the modular construction supports consistent cycle times and predictable tool life, contributing directly to an efficient machining process and steady throughput. Broad compatibility reduces tool inventory and simplifies planning Compatibility with a range of insert sizes — S12, S14, S21, S30 and S40 — makes the cutter a flexible option across multiple thread tasks. The ability to accept several standard indexable insert formats minimises the variety of holders required in the tool crib and streamlines procurement. Where a specific insert geometry or grade is needed, the holder accepts standardised parts, enabling quick changeovers and straightforward inventory management without sacrificing cutting performance. Precise thread results and straightforward maintenance With a nominal Ø 18 mm cutting diameter and an overall length of 85 mm, the tool provides the necessary reach and stability for many threading applications. The use of indexable inserts allows for controlled cutting geometry and consistent thread form. Fasteners supplied with the tool use an M4x10 Torx screw tightened with a T15 key, enabling secure insert clamping and predictable torque application during maintenance. This configuration supports repeatable set-ups and reduces the risk of insert movement that might affect thread accuracy. Application advice for process planners and operators The cutter is suited to milling standard metric threads and can be integrated into conventional CNC cycles for interpolated or helical milling. When configuring machining strategies, prioritise reduced axial engagement and controlled radial passes to preserve insert life and maintain surface finish. The solid shank and indexable concept support higher feeds where chip evacuation is adequate; however, review coolant and chip removal arrangements for interrupted threads or deep internal features to avoid recutting chips. Contact Metav Werkzeuge for tailored advice on the Teknik Makina thread milling cutter DC206TM and to confirm insert grades or machine compatibility; email info@metav-werkzeuge.com or call +49 2822 7131930 to speak with a specialist Technical data Article number: DC206TM Manufacturer: Teknik Makina Eclass: 21180805 ETIM: EC011860 Numerical data Diameter: 18 mm Overall length: 85 mm Shank diameter: 20 mm Design & features Suitable for indexable inserts: S12, S14, S21, S30, S40 Torx screw: M4x10 Torx key: T15 FAQ What insert types are compatible with the thread milling cutter? The cutter accepts standard indexable inserts in sizes S12, S14, S21, S30 and S40; S21 inserts are a common fit for the supplied holder configuration. Is the DC206TM suitable for production use on CNC machines? Yes, the DC206TM from Teknik Makina is designed for CNC thread milling and features a robust 20 mm shank and modular insert system for stable, repeatable production. Which fastener and key are provided for insert clamping? Insert clamping uses an M4x10 Torx screw and requires a T15 Torx key for secure tightening and maintenance. Can the cutter be used for internal and external threads? The cutter is intended for interpolated thread milling on typical external and internal applications; process parameters should be adjusted for chip evacuation and tool engagement. What advantages do indexable inserts offer with this tool? Indexable inserts allow for quick replacement, consistent cutting geometry and reduced downtime compared with solid-thread tools, improving overall cost-efficiency in batch production. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19mm Thread Milling Rod For Internal Threads With Internal Coolant, Solid Carbide E16R IR16 Right-Hand - Teknik Makina
Data inconsistency detected: the field "material" specifies solid carbide while other entries (16 IR insert designation, E16R holder code and 16 mm shank) indicate an indexable‑insert holder; please verify the source data to ensure accuracy and consistency across all fields, as mismatched information could lead to errors in processing, manufacturing, or decision-making; it is essential to cross-check the details provided in the source documentation or database to confirm whether the "material" field is correct or if the other entries need to be updated to reflect the actual specifications of the tool or component in question.
Achieve exact bores with a boring bar with internal coolant
A boring bar with internal coolant is a specialised tool for internal machining on lathes and machining centres, designed to enlarge and finish existing holes to precise dimensional and form tolerances. Also referred to as an internal coolant boring bar or coolant‑fed boring bar, this tool class routes coolant through the tool body so that cutting edges are supplied directly with fluid under pressure.
How internal coolant keeps deep and blind bores reliable
When machining with external coolant only, the fluid is delivered from outside via machine nozzles and often fails to reach the cutting zone in longer bores, leaving chips trapped and increasing thermal load. A boring bar with internal coolant contains axial coolant channels that run through the tool shank to the cutting edge, delivering high‑pressure coolant where it is needed. This arrangement is essential for machining deep bores, blind holes and for materials that produce long, continuous chips; it lowers local temperatures, flushes chips out of the bore and reduces the risk of tool breakage and surface damage.
Key advantages that improve productivity
- Faster cycle reliability: internal coolant reduces thermal distortion and helps maintain tight tolerances over longer runs.
- Improved chip evacuation: pressurised coolant clears chips from the cutting zone, preventing chip clogging and re-cutting.
- Extended tool life: cooler cutting edges and effective flushing reduce wear and the likelihood of catastrophic tool failure.
- Process versatility: suitable for deep bores and blind holes, especially in difficult‑to‑machine or long‑chipping materials.
Metav as the practical partner for precision tooling
Metav stands for the democratisation of precision and is positioned as a pragmatic partner for industry and workshops. Based in Emmerich, Metav combines hands‑on technical expertise with a broad supply range: over 250,000 products and a proven track record with more than 48,000 customers, ensuring steady availability and a quality filter for the European market. For buyers seeking coolant‑fed solutions, Metav offers curated assortments and selection guidance for boring bars with internal coolant.
In summary, a boring bar with internal coolant delivers targeted cooling and chip control that is indispensable for deep and blind bores, improving tolerance control, tool life and process stability.
FAQ
When should a boring bar with internal coolant be chosen over external coolant?
Select a boring bar with internal coolant whenever bores are deep or blind, or when machining hard‑to‑cut or long‑chipping materials; the internal coolant ensures reliable chip evacuation and temperature control where external coolant cannot reach.
How do axial coolant channels reduce the risk of tool breakage?
Axial coolant channels feed high‑pressure coolant directly to the cutting edge, lowering thermal stress at the point of generation and flushing chips away, which together reduce flank wear and the chance of sudden tool failure when using a boring bar with internal coolant.
Can internal coolant boring bars be used on both lathes and machining centres?
Yes. The internal coolant design is compatible with standard toolholders used on lathes and machining centres, making the internal coolant boring bar a flexible choice across machine platforms.
Which workpiece materials benefit most from coolant‑fed boring bars?
Materials that produce long, continuous chips or that are prone to thermal softening during cutting—such as certain stainless steels and high‑strength alloys—benefit markedly from the chip flushing and cooling provided by a boring bar with internal coolant.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com