Precision boring bars with internal coolant for deep hole accuracy
Boring bars with internal coolant are precision tools designed to enlarge and finish existing holes, delivering tight dimensional and form tolerances while preventing tool breakage and surface damage; they are essential for deep bores and blind holes where external cooling cannot reach the cutting edge. These systems force high-pressure coolant through axial channels directly to the cutter, which reduces thermal stress and efficiently evacuates chips, making them ideal for machining difficult-to-cut or long-chipping materials. As a compact tool solution they combine rigidity, chip control and cooling to improve cycle times and extend tool life, with the main advantages being enhanced hole quality, repeatability and reduced rework for production and maintenance machining operations.
13mm SDUC With Coolant Solid Carbide Boring Bar 125mm, Left-Handed, DCMT 0702 - Teknik Makina
Efficient machining performance is achieved by combining solid carbide rigidity with internal coolant for consistent chip control; the compact 13 mm design and 10 mm shank reduce vibration and simplify integration. Order via Metav Werkzeuge or consult their application specialists for insertion and setup recommendations. Boring bar SDUC with Coolant (E10K SDUCL 07) — Solid carbide, 13 mm, left-hand (Teknik Makina) A Boring bar SDUC with Coolant engineered for precision internal coolant delivery and reliable compatibility with DCMT 0702 indexable inserts in turning and internal boring operations. Internal coolant supply Solid carbide construction For DCMT 0702 indexable inserts 13 mm diameter, 10 mm shank Maximised rigidity for stable internal machining The combination of solid carbide construction and a compact 13 mm body delivers rigidity where it matters, limiting deflection during finish passes. A reduced shank diameter of 10 mm keeps the tool compatible with small-holder systems while preserving stiffness across the effective length. The cutting height 7 mm is optimised for DCMT 0702 inserts, providing a stable insert seat and consistent cutting geometry, which leads to repeatable tolerances and fewer reworks in series production. Internal coolant for improved chip control and tool life Built-in internal coolant directs lubricant and coolant precisely to the cutting zone, aiding chip evacuation and local cooling at the tool–workpiece interface. This improves surface finish and reduces thermal wear on the cutting edge, extending service intervals. When machining tighter bores or long overhangs, the coolant supply helps maintain process stability and lowers the risk of built-up edge or work hardening that would otherwise compromise component quality. Fast fitting and predictable orientation to reduce setup time Compatibility with DCMT 0702 indexable inserts and the standardised clamping configuration speed up tool changes. The tool uses a Torx T8 key and M2.5x5.5 screw for secure insert retention, ensuring repeatable seating after each change. The left-hand cutting direction is clearly defined, enabling correct holder selection at the machine. The ISO designation E10K SDUCL 07 simplifies ordering and fixture planning, and the overall length of 125 mm balances reach with vibration control for common internal machining tasks. Discuss application requirements with Metav Werkzeuge to confirm insert grade and coolant pressure parameters for the KE40TM boring bar from Teknik Cutting Tools — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KE40TM Manufacturer: Teknik Makina Product name: Boring bar SDUC with Coolant ISO designation: E10K SDUCL 07 Core data Diameter: 13 mm Overall length: 125 mm Shank diameter: 10 mm Cutting height: 7 mm Weight: 0.05 kg Features & compatibility Material: Solid carbide Internal coolant: yes Compatible inserts: DCMT 0702 Cutting direction: left Torx key: T8 Torx screw: M2.5x5.5 FAQ How does the internal coolant improve machining with this boring bar? The internal coolant in the KE40TM boring bar from Teknik Cutting Tools supplies lubricant directly to the cutting edge, improving chip evacuation and cooling the insert area to reduce wear and support consistent surface finish. Which inserts are recommended for this tool? Compatibility is specified for DCMT 0702 indexable inserts; using the correct insert size and grade matched to material and speed ensures the KE40TM delivers expected tool life and dimensional stability. What holder size is required for mounting this boring bar? The tool has a 10 mm shank diameter; select a holder that accepts a 10 mm shank and accommodates the ISO designation E10K SDUCL 07 for correct seating and clamping. Is the cutting direction suitable for standard turning setups? Yes, the component is designed for left-hand cutting direction; confirm holder orientation in the machine setup to match the intended feed and workpiece rotation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14.5mm Thread Milling Cutter for S12 S14 S21 S30 S40 Indexable Inserts, 20mm Shank - Teknik Makina
Take advantage of a compact design that combines compatibility with multiple indexable insert sizes and a stable 20 mm shank for reliable threading performance; order the cutter directly via Metav Werkzeuge or consult our technical team for application advice. DC204TM thread milling cutter — for S12, S14, S21, S30 and S40 indexable inserts, Ø14.5 mm (Teknik Makina) The DC204TM thread milling cutter is a precision tool intended for machining internal and external threads with indexable inserts across several standard sizes, offering quick insert changes and predictable cycle times Compatible with S12–S40 indexable inserts Cutting diameter Ø14.5 mm 20 mm shank for secure clamping M2.5x7 Torx screw, T8 key included Consistent thread quality through precise geometry The cutter’s design prioritises repeatability and dimensional control: the combination of a defined cutting diameter and exchangeable indexable inserts ensures threads are produced with uniform pitch and profile. By using a standardised insert range, the tool reduces variability between setups and lowers scrap rates, which supports stable production runs and predictable process capability. This focus on precision is particularly valuable where tight tolerances and reproducibility are required. Secure clamping for vibration-resistant machining A 20 mm shank provides a robust connection to the toolholder, improving stiffness and reducing deflection during threading operations. Together with a carefully considered overall length of 85 mm, the assembly minimises chatter and enhances surface finish, especially on interrupted cuts. The inclusion of an M2.5x7 Torx screw and T8 key simplifies insert retention and replacement, shortening maintenance intervals and lowering machine downtime while maintaining consistent cutting conditions. Streamlined workshop logistics and faster set-up Compatibility with a broad range of insert sizes (S12, S14, S21, S30 and S40) allows the same cutter body to be used across different job types, reducing the need for multiple dedicated tools and simplifying inventory. This modular approach supports efficient workshop planning: fewer tool holders and insert types are required, which shortens setup times and accelerates job changeovers. The result is a tangible efficiency gain in batch production and mixed‑model environments. Practical service life and maintenance advantages The tool’s use of indexable inserts means wear is managed by replacing only the cutting edges rather than the entire cutter, which is cost-effective for medium to high volumes. Routine servicing is straightforward thanks to standard fasteners and the universal T8 drive, enabling trained staff to carry out secure insert changes quickly. Supplied by Teknik Makina, the cutter aligns with established industrial standards for robustness and repeatable performance, supporting dependable operation on CNC milling or turning centres. For reliable threading results from Teknik Makina, order the DC204TM via Metav Werkzeuge and benefit from our European supply chain and technical consultancy at Metav Werkzeuge Technical data Article number: DC204TM Manufacturer: Teknik Makina Core specifications Cutting diameter: 14.5 mm Overall length: 85 mm Shank diameter: 20 mm Torx screw: M2.5x7 Torx key: T8 ECLASS: 21180805 ETIM: EC011860 Compatibility & features Indexable inserts: S12, S14, S21, S30, S40 For S14 inserts Aufnahme Ø: 20 mm Manufacturer: Teknik Makina FAQ Which insert sizes can be used with this cutter? The cutter accepts a range of indexable inserts (S12, S14, S21, S30 and S40), allowing flexible selection depending on thread form and cutting conditions. What are the critical dimensions for toolholder selection? Key dimensions are a 20 mm shank and an overall length of 85 mm; these values determine holder compatibility and required clearance. How is the insert secured and replaced? Inserts are fixed with an M2.5x7 Torx screw; replacement uses a T8 key, facilitating quick and repeatable changes. Is this cutter suitable for heavy‑duty threading? The combination of a 20 mm shank and standardised inserts provides good stiffness for typical industrial threading tasks; final suitability depends on the specific workpiece and machine setup. Who supplies the cutter and who is responsible for distribution? The tool is supplied by Teknik Makina and distributed through Metav Werkzeuge to ensure consistent availability for European workshops. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm 62.5° Drill Bar S10J SD-CR For DC-- 0702 Indexable Inserts, 110mm Overall Length - Teknik Makina
Take advantage of the combination of precise indexable-insert compatibility, a compact 10 mm shank, and a 62.5° cutting angle for stable, repeatable boring operations. Order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. S10J SD-CR Drill Bar — 62.5° for DC-- 0702 Indexable Inserts by Teknik Makina The S10J SD-CR is a precision drill bar designed for right-hand turning and boring operations, optimised for use with DC-- 0702 indexable inserts in compact toolholders. Compatible with DC-- 0702 indexable inserts 62.5° cutting angle for reliable chip control 10 mm shank diameter for compact clamping Robust metal construction, weight 0.082 kg Stable cutting geometry for predictable results The 62.5° cutting geometry provides a controlled chip formation that reduces vibration and supports a consistent surface finish. By pairing the 62.5° cutting angle with the appropriate DC-- 0702 indexable inserts, the assembly delivers steady material removal rates and predictable wear behaviour. For users unfamiliar with insert tooling, indexable inserts are replaceable cutting tips that avoid full-tool replacement; this reduces downtime and simplifies maintenance cycles. The right-hand cutting configuration ensures conventional lathe setups can be used without modification, maintaining process reliability and repeatability. Compact shank and rigid construction minimise deflection A 10 mm shank diameter and an overall length of 110 mm provide a compact package suited to tight toolpost spaces and small-toolholder systems. The bore diameter of 14 mm at the cutting end and a cutting height of 25 mm ensure the cutting geometry is supported close to the insert, reducing cantilever effects. The low mass (approximately 0.082 kg) contributes to reduced centrifugal loads at higher spindle speeds and helps maintain accuracy in finishing passes. For workshop planners, the compact dimensions translate into improved access on multi-tool turrets and easier handling during set-up. Durable choice with workshop efficiency in mind Manufactured for robust industrial use, the bar is intended for repetitive turning and boring tasks where frequent insert changes and swift reconditioning are required. Compatibility with the DC-- 0702 family allows stocking a small range of inserts for multiple operations, lowering inventory complexity. The straightforward ISO identification (S10J SD-CR) simplifies procurement and ensures compatibility across standard clamping systems. As an economical alternative to custom solid tools, this indexable-insert solution reduces long-term tooling costs while preserving machining quality and uptime. Choose Teknik Makina's S10J SD-CR for dependable boring performance and contact Metav Werkzeuge for purchase advice or to discuss application details — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: K168TM Manufacturer: Teknik Makina ISO designation: S10J SD-CR Model: SD-CR for DC-- Indexable Inserts Measurements Shank diameter: 10 mm Diameter: 14 mm Cutting height: 25 mm Overall length: 110 mm Weight: 0.082 kg Cutting angle: 62.5° Compatibility & features Compatible inserts: DC-- 0702 Cutting direction: Right-hand Clamping holder designation: 07 FAQ Which inserts are compatible with this drill bar? The drill bar is designed for use with DC-- 0702 indexable inserts; matching the insert grade to the workpiece material ensures the best tool life and surface finish. What does the 62.5° cutting angle mean for machining? A 62.5° cutting angle provides a balance between chip control and cutting edge strength, helping to reduce vibration and deliver consistent finishing results in typical turning and boring operations. Can the bar be used in compact toolholders? Yes, the 10 mm shank diameter and 110 mm overall length make the tool suitable for compact toolholders and tight turret spaces, improving access for multi-station setups. Is the S10J SD-CR suitable for high-speed operations? The bar’s compact design and low mass (0.082 kg) help reduce centrifugal forces; however, cutting speed suitability depends on the chosen insert grade and machine limits rather than the bar alone. How does using indexable inserts affect workshop efficiency? Indexable inserts allow rapid tip replacement without removing the toolholder, reducing downtime and inventory needs; the S10J SD-CR supports this efficiency by being compatible with a widely used insert size. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
14mm Boring Bar STI For IR/ER Indexable Inserts 12mm Shank 125mm Overall Length - Teknik Makina
Precision and stability come together in a compact design: the STI boring bar K350TM offers a Ø14 mm head with a shank Ø12 mm and 125 mm overall length, delivering repeatable internal turning performance for indexable insert operations. The secure IR11 clamping and right-hand cut ensure reliable chip control and minimal vibration. Order the STI boring bar K350TM directly via Metav Werkzeuge or ask our consultants if needed. K350TM STI Boring Bar by Teknik Makina — Ø14 mm, right-hand K350TM STI Boring Bar is a right-hand indexable insert holder engineered for internal turning with IR/ER indexable inserts, suited to lathe and turning centre applications. Right-hand cutting for conventional set-ups Fits 11 IR indexable inserts Shank Ø12 mm for secure clamping 125 mm overall length for extended reach Consistent internal turning accuracy for batch production The STI boring bar is designed to provide stable cutting and repeatable geometry in internal turning tasks. Its compact head diameter of Ø14 mm reduces runout and vibration, which results in improved surface finish and tighter tolerance retention. The combination of a reduced head profile and a robust shank Ø12 mm creates a stiff tool assembly that, when mounted in a suitable holder, gives predictable tool life and reduced rework. For operators and production engineers, this translates into fewer setup adjustments and a steadier process window during serial machining. Fast changeover and insert compatibility for efficient workflows Configured for 11 IR indexable inserts and labelled as STI for IR/ER indexable inserts, the toolholder supports quick insert indexing and replacement, lowering downtime between operations. An IR11 clamping designation ensures compatibility with established clamping systems, while the ISO reference S12K STIR clarifies the holder geometry for integration into existing tool libraries. The use of indexable inserts keeps tooling costs manageable: only the cutting tip is replaced when worn, rather than the entire tool, improving cost efficiency and spare-part logistics in production environments. Designed for secure clamping and improved chip control Right-hand cutting orientation and the specified clamping interface deliver reliable seating and repeatable axial position. The IR11 clamping holder interface is intended to secure the insert firmly, lowering the risk of displacement under load. With a 125 mm overall length, the tool achieves necessary reach into bores while preserving rigidity; this balance of reach and stiffness reduces chatter and supports consistent chip evacuation. Engineers will appreciate the predictable behaviour under varied cutting parameters, which simplifies process qualification and parameter optimisation. Practical advantages supported by Metav’s supply and expertise Sourced through Metav’s distribution, the tool benefits from a supply chain positioned as a European quality filter: central stock in Emmerich and specialist advice tailored to workshop requirements. The design of the holder, combining the STI geometry with a compact Ø14 mm head, addresses common internal turning challenges such as access, visibility and cooling. Where process integration is required, technical data and fitting advice can be provided, enabling efficient selection of inserts and clamping accessories to match spindle speeds and feed rates. For precise internal turning tasks, request a technical consultation or place an order for the K350TM STI boring bar via Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for expert assistance and rapid delivery Technical Data SKU: K350TM Manufacturer: Teknik Makina Article designation: STI for IR/ER indexable inserts (boring bar) ISO designation: S12K STIR Core data Diameter: 14 mm Shank diameter: 12 mm Cutting height: 25 mm Overall length: 125 mm Weight: 0.117 kg Special features For indexable inserts: 11 IR Cutting direction: Right-hand Clamping holder designation: IR11 ECLASS: 21180806 Files: 2 attachments available FAQ Which insert types are compatible with this boring bar? The K350TM accepts 11 IR indexable inserts and is designated STI for IR/ER indexable inserts, meaning it is compatible with IR and ER style inserts that match the IR11 clamping geometry. What is the ISO designation and why does it matter? The holder carries the ISO designation S12K STIR, which identifies the shank and head geometry; this helps to ensure the correct selection of holder pockets and tool presetting in the tool room. How is the insert secured in the holder? Clamping is provided via the IR11 interface; the insert is located and clamped by the holder seat and fastener, ensuring repeatable seating and robust resistance to cutting forces. Is the tool suitable for extended internal reach applications? With an overall length of 125 mm the bar offers increased reach while retaining a shank Ø12 mm that contributes to rigidity, making it suitable for many internal turning tasks where access is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15.5mm Boring Bar for DCMT 0702 Indexable Inserts 125mm Internal Coolant, Left-Hand 95° - Teknik Makina
Take advantage of a compact, left‑hand boring solution that pairs precision with practical cooling and easy insert compatibility; the slim shaft and internal coolant reduce vibration and improve chip control. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Boring bar A10-12K — 15.5 mm diameter, internal coolant, for DCMT 0702 indexable inserts (Teknik Makina) The A10-12K boring bar is a compact, left‑hand cutting boring bar designed for use with DCMT 0702 indexable inserts, offering internal coolant feed and a 125 mm overall length for confined tool stations. 15.5 mm nominal diameter Internal coolant feed Left‑hand cutting direction Compatible with DCMT 0702 inserts Better chip control and consistent cutting with internal coolant The integrated internal coolant channel delivers lubricant directly to the cutting edge, which improves chip evacuation and helps maintain cutting temperatures during extended cycles. As a result, tool life becomes more predictable and surface finish stabilises across repeated operations. With a shaft diameter of 12 mm and an overall length of 125 mm, the compact tool body reduces lever arm vibration, which is particularly advantageous in short‑reach boring applications where rigidity and thermal stability matter. Precise insert fit and reliable clamping for repeatable results Designed for DCMT 0702 indexable inserts, the holder features a clamping geometry that secures the insert reliably while maintaining the correct cutting height of 27 mm. The narrow clamping head width of 8.9 mm enables minimal overhang and accurate positioning in fixture setups. The ISO designation A10-12K indicates compatibility with standard tool holders, providing a straightforward solution for workshops that demand reproducible set‑ups and fast index changes without compromising accuracy. Practical handling and maintenance for production environments Assembly and routine maintenance are simplified thanks to the supplied fastener specification (Torx key T8, screw M2.5x5.5) and the lightweight construction of approximately 0.097 kg, which eases handling during changeovers. The left‑hand cutting orientation supports machining strategies where counter‑directional cutting is required, expanding the tool’s applicability across turning and internal boring tasks. The combination of compact design and coolant feed helps reduce downtime and supports a steady cycle time in mixed production runs. Contact Metav Werkzeuge for expert guidance on integrating the Teknik Cutting Tools boring bar KA517TM into the production line or to confirm compatibility with existing holders and inserts Technical data Article number: KA517TM ISO designation: A10-12K ECLASS: 21180806 Product type: Boring bar Facts Diameter: 15.5 mm Overall length: 125 mm Shaft diameter: 12 mm Cutting height: 27 mm Clamping head width: 8.9 mm Weight: 0.097 kg Cutting direction: left Special features For DCMT 0702 indexable inserts Internal coolant feed Torx key: T8 Torx screw: M2.5x5.5 SKU: KA517TM FAQ Is this holder compatible with DCMT 0702 inserts? Yes. The boring bar A10-12K is designed specifically for use with DCMT 0702 indexable inserts and secures the insert at the correct cutting height for repeatable performance. What does the internal coolant provide for machining? Internal coolant in the A10-12K boring bar supplies lubricant directly to the cutting edge, improving chip evacuation, reducing heat at the shear zone and supporting extended insert life. Which cutting direction does this tool use? The tool is configured for a left cutting direction, suitable for operations that require counter‑directional cutting or specific set‑ups in turning and internal boring. What fasteners are required for insert clamping? The clamping system uses a Torx key T8 and a screw sized M2.5x5.5, which are specified for secure, repeatable tightening. Can the A10-12K be used in compact tool stations? Yes. With a 125 mm overall length and a 12 mm shaft, the boring bar is intended for short‑reach applications where rigidity and reduced overhang are essential. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15.5mm Boring Bar For DCMT 0702 Indexable Inserts Internal Coolant, 125mm Length - Teknik Makina
Take advantage of the combination of internal coolant, a compact 15.5 mm cutting diameter and secure ISO shank design for reliable small‑bore turning. Order the boring bar directly via Metav Werkzeuge or ask our consultants for compatibility advice. Boring bar A10-12K for DCMT 0702 – 15.5 mm with internal coolant (Teknik Makina) The Boring bar A10-12K is a compact, coolant‑through tool designed for precise small‑bore operations with DCMT 0702 indexable inserts in constrained turning applications. 15.5 mm cutting diameter for DCMT 0702 inserts Internal coolant supply for improved cooling 125 mm overall length, compact rigid design Right‑hand cutting direction, ISO A10-12K shank Efficient cooling and longer insert life in small bores The combination of internal coolant and a coolant‑through channel keeps the cutting zone flushed and reduces thermal load on the insert, which prolongs insert life and stabilises cutting forces. With a 15.5 mm cutting diameter and coolant directed to the tip, chips are evacuated more reliably and temperatures at the cutting edge are lowered. This effect is especially valuable for high‑precision finishing where consistent surface quality is required and thermal distortion must be minimised. Compact geometry for rigidity and repeatable clamping A shaft diameter of 12 mm and 125 mm overall length provide a balance between accessibility and stiffness for restricted bores. The bar is finished to an ISO A10‑12K shank standard so it is compatible with a wide range of clamping systems, and the clamping interface is secured with a Torx T8 drive and M2.5x5.5 screw for repeatable seating. The 95° cutting angle and right‑hand cutting direction are engineered to deliver predictable chip flow and steady cutting forces, reducing vibration and improving surface finish. Designed for workshop efficiency and versatile use Optimised for indexable turning with DCMT 0702 inserts, this tool offers a straightforward retrofit into existing toolholders intended for small‑diameter boring. The compact design makes it suitable for confined setups, while the coolant‑through capability supports tougher operations where heat management makes a measurable difference. Lightweight construction and standardised mounting reduce changeover time, helping to keep machine uptime high and tooling logistics simple. For ordering or technical clarification regarding Teknik Makina's boring bar A10-12K (SKU KA513TM), contact Metav Werkzeuge for procurement and application support via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA513TM Manufacturer: Teknik Makina Product type: Boring bar ISO designation: A10-12K Facts Cutting diameter: 15.5 mm Overall length: 125 mm Shaft diameter: 12 mm Cutting height: 27 mm Clamping head width: 8.9 mm Weight: 0.097 kg Cutting angle: 95° Cutting direction: right Special features Internal coolant: yes Compatible inserts: DCMT 0702 Torx screw: M2.5x5.5 Torx key: T8 FAQ Is this bar compatible with DCMT 0702 indexable inserts? The boring bar A10‑12K is designed specifically for DCMT 0702 indexable inserts and provides the correct seating and coolant feed for those inserts. Does the tool provide coolant directly to the cutting edge? Yes, the tool features coolant‑through capability so coolant is delivered directly to the cutting zone to assist chip evacuation and temperature control. What is the overall length and shank standard for mounting? The tool has an overall length of 125 mm and an ISO A10‑12K shank for standardised mounting and secure clamping. Which cutting direction and cutting angle does the tool use? The boring bar is configured for a right‑hand cutting direction with a 95° cutting angle to ensure predictable chip flow and stable cutting behaviour. What fastening hardware is used for the insert seat? The clamping screw is M2.5x5.5, tightened with a Torx T8 key to provide repeatable and secure insert seating. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
15.5mm Boring Bar for DCMT 0702 Indexable Inserts L125mm, Right-Hand - Teknik Makina
Benefit from precise indexable‑insert compatibility and compact dimensions for reliable internal boring. The tool’s 15.5 mm cutting diameter and 12 mm shank deliver stable engagement and simple holder integration, while the 125 mm overall length keeps tool overhang manageable for accurate bores. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar S10-12K for DCMT 0702 indexable inserts — 15.5 mm, L125 mm (Teknik Makina) A Boring bar S10-12K designed for internal turning with DCMT 0702 indexable inserts, offering a compact 125 mm length for controlled cutting and reliable repeatability Compatible with DCMT 0702 inserts Diameter 15.5 mm Overall length 125 mm Right‑hand cutting direction Accurate internal bores with proven insert compatibility The S10‑12K model is engineered to work with DCMT 0702 indexable inserts, ensuring consistent cutting geometry and predictable bore finishes. With a 15.5 mm cutting diameter and a 95° cutting angle, the tool supports small‑bore applications where stability and repeatability matter. These measurable specifications translate into fewer trial passes and tighter tolerances on final bores, reducing scrap and rework in production environments. Fast insert changes and secure clamping reduce downtime A well designed clamping interface speeds routine maintenance. The bar offers an 8.9 mm clamping width and uses a Torx T8 key with a M2.5x5.5 screw for insert retention, enabling quick, tool‑guided replacement of indexable tips. This combination of standardised fixing and compact clamping reduces changeover time and limits process variability, which is especially valuable in batch production or mixed‑series machining. Stable shank geometry for reliable toolholding The 12 mm shank diameter gives a rigid connection to the toolholder, minimising bending and vibration during cuts. At an overall length of 125 mm and a lightweight construction (approximately 0.097 kg), the bar balances reach and stiffness for controlled internal operations. The right‑hand cutting direction is suitable for conventional lathe setups and automatic cycles, helping to maintain consistent chip flow and surface integrity. Practical fit for workshops and production cells Marked as SKU K298TM, this boring bar is a compact and economical option for workshops seeking an insert‑based solution without complex setup. Its form factor is compatible with common toolholders and supports predictable set‑up times. For facilities aiming to streamline tooling inventories, the bar’s standard interface and dimensions make it easy to integrate into existing equipment with minimal adaptation. For ordering or tailored advice on integrating this Teknik Makina boring bar (SKU K298TM) into a production workflow, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical data SKU: K298TM Model: S10-12K Brand: Teknik Makina Product type: Boring bar for DCMT 0702 indexable inserts Core dimensions Diameter: 15.5 mm Overall length: 125 mm Shank diameter: 12 mm Cutting height: 27 mm Clamping width: 8.9 mm Weight: 0.097 kg Cutting angle: 95° Features & compatibility Compatible inserts: DCMT 0702 Cutting direction: right Torx key: T8 Torx screw: M2.5x5.5 ECLASS: 21180806 FAQ Which inserts fit this boring bar? The boring bar S10‑12K is compatible with DCMT 0702 indexable inserts and is supplied as SKU K298TM for easy ordering. What is the cutting direction of the tool? The bar is configured for a right‑hand cutting direction, suitable for standard lathe and CNC machining cycles. What shank size is required in the toolholder? A 12 mm shank diameter is specified for the toolholder interface, providing secure seating and stability. Which Torx key and screw secure the inserts? Insert retention uses a Torx T8 key and M2.5x5.5 screw for reliable clamping and straightforward replacement. Is the S10‑12K suitable for production and workshop use? Yes, the S10‑12K from Teknik Makina is designed for workshop and production environments where compact, insert‑based boring with predictable set‑up times is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm A16M SCLCR Right-Hand Drill Bar With Internal Coolant, 95° Cutting Angle - Teknik Makina
Take advantage of a compact SCLC indexable insert holder that combines internal coolant, precise compatibility with CC-- 09T3 inserts and a rigid 16 mm shank for stable turning operations; order the tool via Metav Werkzeuge or consult their specialists for application advice. Boring bar KA111TM — SCLC holder for CC-- 09T3 indexable inserts, internal coolant (Teknik Makina) KA111TM is a compact SCLC-style boring bar designed for external turning and boring with CC-- 09T3 indexable inserts, offering internal coolant and a right-hand orientation for conventional lathe setups. Internal coolant for improved tool performance Compatible with CC-- 09T3 indexable inserts Right-hand SCLC holder, ISO A16M SCLCR 16 mm shank, 150 mm overall length Strong compatibility that simplifies tooling choices The SCLC design is optimised for indexable inserts, providing a standardised interface that reduces setup time and inventory complexity. Compatibility with CC-- 09T3 inserts ensures a wide range of cutter grades and geometries can be used, allowing adaptation to different materials and cutting conditions. The ISO designation A16M SCLCR clarifies mounting dimensions and orientation for integration with existing tool posts and turret systems, supporting a predictable installation and repeatable positioning. Internal coolant and chip control for consistent surface results Built-in internal coolant feeds cutting fluid directly to the cutting zone, promoting effective chip evacuation and improved heat management. The feed-through coolant path helps maintain insert temperature and reduces built-up edge, which in turn supports dimensional stability and surface finish. With a specified cutting angle 95°, the tool geometry balances cutting forces and tool life, making it well suited to medium-duty turning where consistent performance is required. Compact dimensions for stability and reach in confined spaces A 16 mm shank diameter delivers a compact yet rigid interface with the machine tool, while the 150 mm overall length provides adequate reach for many external and light internal operations without excessive overhang. The tool’s effective diameter 20 mm and cutting height 30 mm are engineered to offer a stable cutting stance, reducing vibration and improving repeatability. At 0.227 kg, the holder is lightweight for quick handling yet designed to provide reliable clamping when secured according to standard practices. Application notes and integration into workshop workflows The holder is supplied for a right-hand cutting direction and accepts the CC-- 09T3 insert format, so selection of the correct insert grade and geometry is essential for the target material and finish. The SCLC clamping principle enables straightforward insert replacement and secure seating; ensure the clamping screw and pocket are free of swarf before assembly. This design supports predictable cycle times and reduces the need for special adaptors, making it suitable for production turning, short-run machining and retrofit jobs in general workshop and industrial environments. For supply or technical consultation on Teknik Makina’s SCLC boring bar KA111TM, contact Metav Werkzeuge in Emmerich for tailored advice and reliable delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: KA111TM Manufacturer: Teknik Makina Article designation: SCLC for CC-- Indexable Inserts ISO designation: A16M SCLCR Cutting direction: right Facts Shank diameter: 16 mm Cutting height: 30 mm Effective diameter: 20 mm Overall length: 150 mm Weight: 0.227 kg Cutting angle: 95° Special features Internal coolant: yes Suitable for CC-- 09T3 inserts SCLC holder geometry Right-hand configuration FAQ Which inserts fit this holder? The holder accepts CC-- 09T3 indexable inserts; match the insert grade to the workpiece material and the desired surface finish when using this Teknik Makina SCLC holder (KA111TM). Is the coolant routed to the cutting edge? Yes, the boring bar features internal coolant, which supplies cutting fluid directly toward the insert to aid chip control and thermal stability. What shank and overall length does the tool have? The tool has a 16 mm shank and 150 mm overall length, providing a compact reach with good rigidity for standard turning tasks. Can the holder be used for internal boring? With its dimensions and right-hand orientation, the holder is primarily intended for external turning and light boring; ensure adequate clearance and correct setup for any internal application. What is the cutting angle and why does it matter? The tool has a 95° cutting angle, a geometry that balances cutting forces and promotes a stable cutting action suitable for a variety of turning operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm A16M SDUCL Drilling Bar SDUC for DC-- 11T3 Indexable Inserts Internal Coolant, Left-Hand 93° - Teknik Makina
Compact 16 mm shank and internal coolant combine to deliver rigid toolholding and effective chip evacuation for stable turning. With compatibility for DC-- 11T3 indexable inserts and an ISO A16M SDUCL designation, this boring bar ensures predictable insert performance — order via Metav Werkzeuge or consult our specialists for technical fitment. KA259TM A16M SDUCL Boring Bar – Left‑hand, internal coolant for DC-- 11T3 inserts (Teknik Makina) The KA259TM is a left‑hand boring bar designed for CNC turning applications, engineered to accept SDUC‑style indexable inserts for internal‑coolant‑assisted machining on production and jobbing lathes Left‑hand cutting orientation Internal coolant delivery 16 mm shank for rigid clamping Compatible with DC-- 11T3 inserts Stability and repeatable toolholding for production A robust toolholder is essential for consistent results; the 16 mm shank and ISO designation A16M SDUCL provide a standardised fit that reduces runout and vibration. The combination of shank diameter and a 150 mm overall length balances accessibility and rigidity to support short‑reach boring and finishing passes. Specified mass (0.246 kg) and measured geometry help machine setup precision, which translates into reliable concentricity and longer insert life in serial production. Controlled cooling and cleaner chip flow Integrated internal coolant ensures coolant reaches the cutting zone directly, aiding heat dissipation and chip evacuation when paired with the appropriate insert geometry. The declared cutting angle of 93° supports stable engagement and predictable chip formation with DC‑series inserts. For applications where thermal control affects tolerances, the coolant channel improves surface finish and reduces the risk of built‑up edge, making the tool suitable for consistent, repeatable operations. Flexible indexable insert system and left‑hand orientation Designed for SDUC‑style indexable inserts (notably DC-- 11T3), the holder supports quick insert changes and cost‑effective tool management. Left‑hand cutting orientation is commonly required for specific lathe setups or insert geometries; this tool matches those needs without compromise. The compatibility with widely available inserts lowers tooling overhead and permits rapid adaption between roughing and finishing grades while maintaining a conservative tool inventory. Practical integration in workshop workflows This boring bar is intended for machinists and production engineers seeking a straightforward insert‑based solution for internal‑coolant turning tasks. Installation follows standard clamping practices for A16M holders; when replacing inserts, the modular concept minimises downtime and simplifies inventory. Combined with Metav’s distribution and technical support, the product integrates into maintenance cycles without elaborate retooling, supporting a dependable supply chain for everyday workshop demands. For consistent chip control and standardised toolholding, request the KA259TM A16M SDUCL boring bar from Metav Werkzeuge — contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application advice and availability. Technical data SKU: KA259TM ISO designation: A16M SDUCL Model reference: SDUC for DC-- Indexable Inserts Numerical data Overall length: 150 mm Diameter: 20 mm Shank diameter: 16 mm Cutting height: 30 mm Weight: 0.246 kg Cutting angle: 93° Features / Compatibility Internal coolant: yes Cutting direction: left For indexable inserts: DC-- 11T3 Insert style: SDUC for DC-- indexable inserts FAQ Which inserts fit this boring bar? The KA259TM boring bar from Teknik Makina is designed for SDUC‑style inserts and is specified for DC-- 11T3 indexable inserts for predictable seating and chip control. Is the tool suitable for coolant‑through machining? Yes — the KA259TM features internal coolant to direct fluid to the cutting edge, improving heat management and chip evacuation during turning operations. What shank size and length does the holder use? This holder uses a 16 mm shank with a 150 mm overall length, providing a balance between accessibility and rigidity for typical CNC lathe setups. Which cutting direction is supported? The tool is manufactured for left‑hand cutting, suitable for lathe configurations and insert geometries that require left‑hand engagement. What standard and designation does the holder follow? The tool conforms to the ISO designation A16M SDUCL, which aids in standardised clamping and compatibility across compatible toolposts and turrets. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Bar for CCMT 0602 Indexable Inserts With Internal Coolant, 16mm Shaft - Teknik Makina
High rigidity and internal coolant deliver consistent chip evacuation and extended insert life; compatible with CCMT 0602 indexable inserts and a 16 mm shank for stable mounting. Order the boring bar directly via Metav Werkzeuge or request application advice from the consultants. Boring bar KA503TM — 16 mm shank, internal coolant (Teknik Makina) KA503TM is a compact boring bar engineered for reliable mounting of CCMT 0602 indexable inserts in turning and boring operations. Internal coolant for improved chip evacuation Compatible with CCMT 0602 indexable inserts 16 mm shank diameter, overall length 150 mm Right-hand cutting, 95° cutting angle Precision and performance where it counts The KA503TM delivers a combination of rigidity and thermal control that supports stable machining results. The integrated internal coolant feeds coolant directly to the cutting edge, reducing heat build-up and enabling longer insert life and more consistent dimensional accuracy. Compatibility with CCMT 0602 inserts allows the use of widely available indexable grades, simplifying tool selection while maintaining predictable cutting behaviour. As a result, machining cycles become more efficient and tool-change frequency is reduced. Engineered for dependable workshop workflows A 16 mm shank and 150 mm overall length provide a balanced compromise between reach and stiffness, improving cutting stability compared with longer, slimmer bars. The right-hand cutting orientation and a 95° cutting angle are suited to standard facing and light boring tasks where controlled chip flow and surface finish matter. Assembly and clamping rely on a Torx T8 interface and screw M2,5x5,5, offering secure fixation of the insert seat and straightforward maintenance without specialised fixtures. The reduced handling weight helps faster set-up times while maintaining the mechanical integrity required in production environments. Simpler maintenance and practical applications Designed for routine turning and internal boring with indexable inserts, the tool supports quick insert replacement and straightforward troubleshooting. The internal coolant path helps flush chips away from the cutting zone, lowering the risk of built-up edge and improving finish on softer to medium-strength materials. Routine maintenance consists of checking the Torx screw torque and ensuring coolant channels remain clear; replacement parts use standard sizes to keep downtime minimal. For workshops seeking a compact, coolant-fed bar for CCMT 0602 inserts, this bar is a practical choice that prioritises repeatable performance. For coolant-fed boring with proven stability, contact Metav Werkzeuge to request the Teknik Makina KA503TM or speak with the consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: KA503TM Product type: boring bar ISO designation: A12-16M Manufacturer: Teknik Makina ECLASS: 21180806 Facts Diameter: 16 mm Shank diameter: 16 mm Overall length: 150 mm Cutting height: 42 mm Cutting angle: 95° Weight: 0.195 kg Clamp holder cutting-head width: 8.9 mm Special features Compatible inserts: CCMT 0602 Internal coolant: yes Cutting direction: right-hand Torx key: T8 Torx screw: M2,5x5,5 Label: 16mm boring bar CCMT 0602 L150mm with internal coolant FAQ Is this boring bar compatible with CCMT 0602 inserts? Yes. The KA503TM is designed specifically for use with CCMT 0602 indexable inserts and supports standard insert geometries for predictable cutting behaviour. Does the tool support internal coolant delivery? Yes. The boring bar features internal coolant to direct coolant to the cutting zone, which improves chip evacuation and can extend insert life. What sizes and lengths are provided? The bar has a 16 mm shank diameter and an overall length of 150 mm, offering a compact solution for short-reach boring and facing tasks. Which fastening hardware is required for the insert? Assembly uses a Torx T8 interface with a screw sized M2,5x5,5, ensuring secure clamping of the insert pocket. For which cutting direction is the bar configured? The tool is configured for right-hand cutting and a 95° cutting angle, suitable for standard turning and light boring operations. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Bar SCLCR 06 Solid Carbide SCLC With Coolant, Right-Hand - Teknik Makina
Benefit from a rigid, solid‑carbide design combined with internal coolant for stable, high‑precision boring; the compact 16 mm diameter and 150 mm length reduce vibration and support consistent surface finish. Order directly via Metav Werkzeuge or consult the technical team for application-specific recommendations. Boring bar SCLC with Coolant — solid‑carbide, internal‑coolant boring bar by Teknik Makina The Boring bar SCLC with Coolant is a right‑hand, solid‑carbide tool with internal coolant delivery, engineered for precise internal turning and bore finishing in confined bores Solid carbide construction Internal coolant delivery Compatible with CC‑0602 inserts 16 mm diameter, 150 mm overall length Stable machining thanks to internal coolant and rigid construction The combination of solid carbide construction and internal coolant delivery keeps cutting temperatures down and reduces thermal expansion, which translates directly into more consistent bore diameters and fewer rework cycles. Internal coolant channels feed cutting fluid close to the cutting edge, improving chip evacuation and cooling at the point of contact; this reduces tool wear and supports longer tool life under continuous production conditions. For operations that demand repeatable bore quality, the integrated coolant capability is a measurable productivity driver. Quick insert changes and secure clamping to cut downtime Designed to accept CC‑0602 indexable inserts and identified by the ISO designation E12M SCLCR 06, the bar uses a standard Torx fastening system (Torx T8 with screw M2.5x5.5) for straightforward plate replacement. The 12 mm shank diameter provides a familiar interface for many tool holders, meaning integration into existing set‑ups is usually simple. Fewer manual adjustments and faster insert changes reduce machine downtime, delivering clear efficiency gains on batch and repeat jobs. Precision geometry for reduced vibration and improved surface finish With a nominal 16 mm diameter, 150 mm overall length and 7 mm cutting height, the boring bar has been balanced to minimise overhang and vibration while allowing effective access to internal features. The monolithic carbide body increases stiffness compared with multi‑component holders, which helps to lower chatter and improve surface finish on the bore wall. The right‑hand cutting direction is suited to standard spindle rotations and commonly used turning cycles, supporting reliable, predictable results in precision applications. Supply reliability and technical backing from Metav IndustryLine Sourced via Metav IndustryLine, the tooling is backed by a distribution approach that emphasises consistent availability and technical competence. Metav combines a broad product range with decades of sector experience, offering transparent order processing from Emmerich and an established quality filter for the European market. This supply assurance helps to reduce procurement complexity and keeps production moving with trusted components. Contact Metav Werkzeuge for tailored machining advice or to arrange supply of the Teknik Makina boring bar SCLC with Coolant from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: KE12TM Manufacturer: Teknik Makina ISO designation: E12M SCLCR 06 Inner cooling: yes Facts Diameter: 16 mm Overall length: 150 mm Shank diameter (mount): 12 mm Weight: 0.2 kg Cutting height: 7 mm Special features Material: solid carbide For inserts: CC‑0602 Cutting direction: right (right‑hand) Torx key: T8 Torx screw: M2.5x5.5 Right‑hand machining FAQ Which inserts fit this boring bar? The bar is configured for CC‑0602 indexable inserts; the ISO designation E12M SCLCR 06 indicates the compatible insert geometry. Does the tool feature internal coolant? Yes, the boring bar has internal coolant to improve cooling and chip removal at the cutting zone. What are the key dimensions of the tool? The tool has a 16 mm diameter and a 150 mm overall length with a 12 mm shank diameter. Is the bar made of solid carbide? Yes, the body is solid carbide, providing enhanced rigidity and vibration damping for precision boring. How are inserts secured? Inserts are fastened with a Torx system using a T8 key and M2.5x5.5 screw for secure clamping. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Boring Bar SDQC With Coolant, Left-Hand, Solid Carbide Set 13-16mm - Teknik Makina
Take advantage of the combination of solid carbide construction and internal coolant to secure stable, high-precision performance in indexable-insert turning operations; order via Metav Werkzeuge or consult our specialists for application guidance. Boring bar SDQC with Coolant — solid carbide, internal coolant, for DCMT 0702 inserts (Teknik Makina) A SDQC with Coolant boring bar set designed for left-hand turning applications, compatible with DCMT 0702 indexable inserts and supplied as a two-piece set. Solid carbide construction for high rigidity Internal coolant supply for improved chip evacuation Compatible with DCMT 0702 indexable inserts Left-hand cutting, set 13–16 mm, 2 pieces per set Built for rigidity and repeatable accuracy The design is focused on delivering consistent machining results through solid carbide construction, which increases rigidity and reduces vibration during internal turning. Greater stiffness translates into improved surface finish and tighter tolerances, making the tool suitable for precision operations on production lathes and turning centres. The robust build reduces insert wear under comparable cutting conditions, supporting predictable tool-change intervals and steady throughput. Coolant-fed design increases tool life and process stability With an integrated internal coolant channel, the holder supplies cutting fluid directly to the insert edge, improving chip control and reducing thermal load. This targeted cooling enables higher cutting parameters and longer insert life by preventing edge deformation and built-up edge formation. The coolant-fed geometry also helps evacuate chips from deep bores, lowering the risk of recutting and ensuring consistent cycle times for repetitive parts. Practical compatibility and workshop-ready details The IPS35TM set includes sizes for the 13–16 mm diameter range and is supplied as two items (E10K SDQCL 07 and E12M SDQCL 07), offering immediate interchangeability. It accepts DCMT 0702 indexable inserts and secures the insert with an M2.5x5.5 Torx screw (Torx key T8), enabling quick maintenance and reliable clamping. The compact 0.15 kg weight per item supports simple handling and fast setup in batch production. These features reduce downtime and simplify inventory management in an organised workshop. Ideal use cases and operational advantages Intended for left-hand turning tasks, the toolset performs best where access or machining strategy favours a left-hand cutting direction. The combination of coolant delivery and a carbide body makes the set well suited to demanding internal turning where thermal stability and chip evacuation are priorities. In practice, the configuration minimises rework and contributes to a smoother production flow by lowering the frequency of insert change-outs and reducing scrap rates. Contact Metav Werkzeuge for tailored application advice on Teknik Makina coolant-fed boring bars and secure supply directly from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical data SKU: IPS35TM Manufacturer: Teknik Makina Contents: E10K SDQCL 07 and E12M SDQCL 07 Facts Diameter range: 13–16 mm Pieces per set: 2 Weight: 0.15 kg Torx key: T8 Torx screw: M2.5x5.5 Cutting direction: left-hand Material: solid carbide Special features Internal coolant supply Compatible with DCMT 0702 indexable inserts Supplied as a set for quick interchange Compact, workshop-ready design FAQ How does the internal coolant improve performance? The internal coolant channel delivers fluid directly to the cutting edge, improving chip evacuation and cooling; the IPS35TM coolant-fed holder from Teknik Makina reduces thermal stress and extends insert life. Which inserts fit this holder? The holder is designed for DCMT 0702 indexable inserts, offering secure clamping and straightforward insert replacement for consistent cutting geometry. What sizes are included in the set? The set covers a diameter range of 13–16 mm and is supplied as two pieces (E10K SDQCL 07 and E12M SDQCL 07), providing immediate compatibility for the listed bore sizes. Is the tool right- or left-hand cutting? This variant is a left-hand cutting tool, specified for operations that require a left-hand approach. What material is the holder made from? The holder is manufactured from solid carbide, chosen for its stiffness and wear resistance in precision turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Boring Bar Set for DCMT 0702 Indexable Inserts, 3-Piece - Teknik Makina
Take advantage of a compact, three-piece set that ensures immediate compatibility with DCMT 0702 indexable inserts, simplifying tooling management and reducing changeover time; order the set directly via Metav Werkzeuge or ask our consultants for application advice. Boring Bar Set for DCMT 0702 Indexable Inserts (3-piece) — Teknik Makina The Boring Bar Set for DCMT 0702 Indexable Inserts is a compact toolholder package designed for secure mounting of DCMT 0702 turning inserts, optimised for internal turning and facing tasks in industrial workshops Compatible with DCMT 0702 indexable inserts Includes A08-10H, A10-12K, A12-16M holders Three-piece set for stepped diameter coverage Broad insert compatibility for fewer tool changes The three-piece toolholder set offers straightforward adaptation to commonly used DCMT 0702 cutting grades, allowing rapid insert exchanges without the need for additional adapters. By including the A08-10H SDUCL 07, A10-12K SDUCL 07 and A12-16M SDUCL 07 holders, the set covers a useful range of bore diameters and clamping positions, which reduces the need to hold multiple single holders in stock. This approach improves machine uptime and simplifies inventory management in production environments. Consistent mounting and predictable machining results Designed for indexable insert tooling, the holders ensure repeatable seating and stable insert orientation, which supports consistent cutting geometry and surface finish. Secure insert mounting reduces the risk of poor contact and minimises runout effects, contributing to longer insert life and fewer reworks. The result is a reliable tooling solution that supports steady cycle times and predictable process performance across serial production and workshop jobs. Practical choice for workshops and production lines The set is suitable for manufacturers and job shops that rely on indexable insert systems for efficient metal removal. Its compact configuration makes it easy to store and to include in modular tooling kits for automatic tool changers or manual toolrooms. Combined with Metav’s dependable supply chain and technical consultancy, the package supports rapid procurement and integration into existing turning operations, helping maintain production continuity. For consistent insert compatibility and simplified tooling logistics, contact Metav Werkzeuge to order the Teknik Makina boring bar set and discuss the best holder selection for specific turning applications. Technical data SKU: IPS10TM ECLASS: 21189217 Product type: Bohrstangen-Set Label: Bohrstangen-Set DCMT 0702 UID: IPS10TM Facts Set pieces: 3 Included holders: A08-10H SDUCL 07, A10-12K SDUCL 07, A12-16M SDUCL 07 Compatible inserts: DCMT 0702 Special features Compact three-piece toolholder set Suitable for internal turning and facing Manufacturer: Teknik Makina FAQ What is included in the set? The set contains three holders: A08-10H SDUCL 07, A10-12K SDUCL 07 and A12-16M SDUCL 07, delivered as a three-piece tooling package (SKU IPS10TM). Which inserts fit these holders? These holders are specified for use with DCMT 0702 indexable inserts, providing correct seating and orientation for that insert geometry. Is this set suitable for production use? Yes, the three-piece configuration and standardised insert compatibility make the set appropriate for both workshop and serial production environments where DCMT 0702 inserts are used. Can the holders be used with other insert sizes? The holders are designed specifically for the DCMT 0702 insert format; other insert geometries will require compatible holders matched to their insert designation. Who manufactures the set? The set is produced by Teknik Makina and supplied under SKU IPS10TM for industrial tooling applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Boring Bar Set With Or Without Coolant, Left-Hand, 3 Pieces - Teknik Makina
Benefit from a versatile, workshop-ready set that combines left-hand cutting, an option for internal coolant, and direct compatibility with common indexable inserts; order the IPS23TM directly via Metav Werkzeuge or consult our specialists for application advice. IPS23TM — Boring bar set by Teknik Makina, left-hand, with or without coolant The IPS23TM is a compact boring bar set for external turning and indexable-insert operations, offered with or without internal coolant to suit diverse workshop requirements. Left-hand cutting for specific turning operations Option for internal coolant supply Compatible with DC--0702 and DC--11T3 inserts Includes S10J, S12K and S16M boring bars Precision and compatibility that optimise production The set is designed to deliver consistent cutting geometry across common diameters, reducing setup time when changing operations. By matching the bars to widely used indexable inserts such as the DC--0702 and DC--11T3 families, the tooling strategy becomes more efficient: fewer proprietary holders are required and spare-part logistics are simplified. Traceable construction and repeatable tolerances support steady cycle times and predictable tool life, which equates to improved process reliability on small to medium batch runs. Cooling option for longer tool life and cleaner cuts Choosing the configuration with internal coolant provides targeted cooling at the cutting edge, which assists in chip evacuation and reduces thermal load on the insert. For operations that generate higher cutting temperatures or require superior surface finish, internal supply reduces the risk of built-up edge and extends insert life. Where coolant is unnecessary, the alternative no-coolant version offers a cost-efficient solution while retaining the same mechanical accuracy and clamping performance. Practical design and serviceability for workshop use The trio of bars (S10J, S12K, S16M) covers a useful range of external turning tasks and is intended to fit compact setups. Supplied fastening hardware and maintenance tools are specified for rapid servicing: Torx keys T8 and T15 and securing screws M2.5x5.5 and M3.5x8.5 allow quick insert changes and minimal downtime. The left-hand cutting direction matches machines and processes that require reverse orientation, helping to avoid unexpected rework and improving operator ergonomics when integrated into existing tool sets. For tailored advice on integrating the Teknik Makina IPS23TM boring bar set into an existing tooling strategy, contact Metav Werkzeuge for specification support and reliable supply from Emmerich. Technical data Article number: IPS23TM Manufacturer SKU: IPS23TM Brand: Teknik Makina Facts Weight: 0.446 kg Pieces per set: 3 Diameter range: set 12–20 mm Special features With or without coolant Left-hand cutting direction Compatible with DC--0702 and DC--11T3 inserts Contains S10J SDUCL 07, S12K SDUCL 07, S16M SDUCL 07 Torx keys: T8 and T15 Torx screw sizes: M2.5x5.5 and M3.5x8.5 FAQ What applications suit this boring bar set best? The IPS23TM boring bar set is intended for external turning with indexable inserts; it is suitable for workshop and light industrial turning tasks where left-hand cutting or optional coolant supply is required. Are the inserts supplied with the set? The set is compatible with DC--0702 and DC--11T3 insert types; insert supply depends on the chosen configuration and ordering options for the IPS23TM. How does the internal coolant option affect maintenance? Internal coolant in the IPS23TM route concentrates cooling at the cutting zone, improving chip evacuation and reducing thermal wear; periodic inspection of the coolant channels is recommended to maintain performance. Which fasteners and tools are specified for insert changes? Insert retention uses Torx screws sized M2.5x5.5 and M3.5x8.5; Torx keys T8 and T15 are specified for servicing the IPS23TM set. Can the set be used on right-hand lathes? The IPS23TM is manufactured with a left-hand cutting direction; compatibility with a right-hand lathe depends on the specific machine setup and fixturing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drill Bar for CCMT 0602 Indexable Inserts 16mm Shaft, Internal Coolant, Left-Hand 95° Cut - Teknik Makina
The combination of secure clamping, internal coolant and a 16 mm shank ensures stable, high‑precision boring with reduced vibration and improved tool life. Order the boring bar directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Boring Bar A12-16M for CCMT 0602 Indexable Inserts — 16 mm shank, internal coolant (Teknik Makina) The Boring Bar A12-16M for CCMT 0602 Indexable Inserts is a left‑hand cutting tool designed for precision turning and boring operations where secure insert clamping and coolant supply are required Internal coolant for reliable chip evacuation 16 mm shank for secure clamping Compatible with CCMT 0602 indexable inserts Left‑hand cutting for specialised turning tasks Stable cutting performance through rigid shank design The solid 16 mm shank and the A12‑16M mounting form a compact, vibration‑resistant assembly that contributes directly to repeatable bore quality. A stiffer toolholder reduces chatter and helps maintain concentricity when machining tight tolerances, which is particularly important in serial production and finish turning. The modest mass of the component also assists rapid tool changes and keeps spindle load predictable during high‑precision cycles. Longer tool life and better surfaces with internal coolant Integrated internal coolant delivers lubricant and cooling directly to the cutting zone, lowering temperatures and improving chip control. This targeted coolant supply reduces thermal expansion of the cutting edge and workpiece, which in turn helps achieve a consistent surface finish. In practice, internal feed minimises built‑up edge and extends insert life, making the system more economical over many machining hours while maintaining process stability. Quick insert changes and reliable fastening Compatibility with CCMT 0602 indexable inserts simplifies tool inventory and replacement. The clamp geometry with an 8.9 mm clamping head width and a cutting height of 42 mm provides secure seating for the insert; fastening is achieved with a Torx screw M2.5x5.5 operated by a T8 key for straightforward servicing. The accessible screw layout shortens maintenance time and reduces downtime in workshop workflows. Application focus: left‑hand cutting and machining reach Designed for left‑hand cutting, the bar suits operations where the cutting feed is from right to left, for example certain internal turning or specialised setups. The 150 mm overall length offers sufficient reach for many internal machining tasks while maintaining rigidity. A 95° cutting angle supports stable engagement of the insert, enabling consistent chip formation and controlled material removal rates in routine production environments. For consistent, vibration‑reduced boring in left‑hand turning applications, order the Teknik Makina A12‑16M through Metav Werkzeuge — contact our Emmerich team for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KA509TM Model: A12-16M Name: Boring bar for CCMT 0602 indexable inserts Core technical data Shank diameter: 16 mm Overall length: 150 mm Cutting height: 42 mm Clamping head width: 8.9 mm Weight: 0.195 kg Cutting direction: left Special features Internal coolant Compatible with CCMT 0602 inserts Torx screw M2.5x5.5, Torx key T8 Cutting angle: 95° FAQ What inserts fit this boring bar? The A12‑16M boring bar is compatible with CCMT 0602 indexable inserts, enabling use of commonly stocked grades for finish and semi‑finish turning. Is the coolant supply internal or external? This tool features internal coolant, which feeds lubricant directly to the cutting zone for improved chip evacuation and extended insert life. Which direction does the tool cut? The bar is configured for left‑hand cutting, suitable for operations where the tool must cut from right to left. What fastening hardware is used for the insert? Insert retention is via a Torx screw M2.5x5.5, serviced with a T8 Torx key for secure, repeatable clamping. What are the dimensions relevant to clamping and reach? Key dimensions are a 16 mm shank, 150 mm overall length, 42 mm cutting height and 8.9 mm clamping head width, balancing reach with rigidity. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drill Bar For CCMT 0602 Indexable Inserts 95° Cutting Angle, Right-Hand - Teknik Makina
Take advantage of a compact combination of precise fitment and secure clamping: the 16 mm shank with a 150 mm overall length and a 95° cutting angle delivers stable internal turning and predictable tool life. Order the boring bar directly via Metav Werkzeuge or ask our consultants if needed. Boring bar S12-16M – 16 mm shank, for CCMT 0602 indexable inserts (Teknik Makina) A boring bar S12-16M designed for internal turning with CCMT 0602 indexable inserts, offering a compact 150 mm overall length and right-hand cutting for reliable workshop use *Boring bar S12-16M for CCMT 0602 inserts *16 mm shank diameter, 150 mm overall length *Right-hand cutting with 95° cutting angle *Torx T8 screw M2.5x5.5; weight 0.195 kg Precision and compatibility for internal turning The combination of a 16 mm shank and compatibility with CCMT 0602 indexable inserts ensures a standardised solution for internal turning operations where repeatability matters. The compact 150 mm overall length reduces overhang and vibration, which supports consistent bore geometry and improved surface finish. For CNC and bench setups alike, the standard interface minimises changeover time and simplifies tool inventory management. Secure clamping and serviceable insert mounting A robust fastening arrangement with a Torx T8 drive and screw M2.5x5.5 provides reliable insert retention and straightforward replacement during maintenance. The clamping head width of 8.9 mm and a cutting height of 42 mm are balanced to secure the insert while allowing sufficient rake and clearance for most turning tasks. The ISO shank designation S12-16M signals compatibility with common toolholders and supports quick, repeatable mounting in modular tool systems. Geometry tuned for efficient metal removal The 95° cutting angle and right-hand cutting direction are selected to favour stable cutting forces and predictable chip flow in bore machining. The tool’s modest mass at 0.195 kg helps reduce centrifugal loads during high-speed rotations, which can translate to less chatter and longer insert life. These characteristics contribute to efficient material removal while preserving the integrity of the workpiece. Practical handling and workshop integration Labeled under SKU K296TM, this bar from Teknik Makina offers a compact footprint and straightforward handling for production and maintenance teams. The design supports quick insert swaps and low downtime, which is especially valuable in small-batch machining or setups with frequent tool changes. Compatibility with industry-standard CCMT inserts keeps stocking requirements lean and supports predictable procurement. For application advice on the Teknik Makina boring bar S12-16M (SKU K296TM) and to arrange supply from Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and delivery options Technical data SKU: K296TM Manufacturer: Teknik Makina Product type: Boring bar Designation: S12-16M Core technical data Diameter: 16 mm Shank diameter: 16 mm Overall length: 150 mm Cutting height: 42 mm Clamping head width: 8.9 mm Weight: 0.195 kg Cutting angle: 95° Special features Compatible with CCMT 0602 indexable inserts Right-hand cutting Torx screw: T8, M2.5x5.5 Label: 16mm Bohrstange CCMT 0602 L150mm FAQ Which inserts fit this boring bar? The bar is designed for CCMT 0602 indexable inserts; the geometry and clamping dimensions match that insert form. What is the shank standard of the tool? The shank is designated S12-16M, which indicates the standardised shank geometry for secure mounting. Which cutting direction does the tool use? This tool is configured for right-hand cutting with a 95° cutting angle for stable internal turning. How is the insert fixed to the bar? Insert retention uses a Torx T8 screw (M2.5x5.5), enabling secure and serviceable fastening. What is the product SKU for ordering and stock purposes? The SKU for ordering is K296TM, listed under Teknik Makina. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Drill Bar SDUC With Coolant, Solid Carbide, For DCMT 0702 Inserts, Right-Hand - Teknik Makina
Take advantage of a rigid, coolant-fed design plus compatibility with common indexable inserts for reliable chip control and consistent surface finish; order the boring bar directly via Metav Werkzeuge or ask our consultants if needed Boring bar KE31TM — SDUC boring bar with internal coolant, solid carbide (Teknik Makina) The Boring bar KE31TM is a right-hand SDUC tool with integrated coolant delivery, designed for precision turning and boring with indexable inserts in metalworking environments Solid carbide body for high rigidity Internal coolant supply for effective cooling Accepts DCMT 0702 indexable inserts Ø16 mm diameter, 150 mm overall length Greater rigidity for improved surface quality Manufactured from solid carbide, this holder provides a stiff, vibration-resistant platform that supports repeatable results in precision turning. The combination of a Ø16 mm cutting diameter and a 150 mm overall length reduces deflection compared with less rigid solutions, which helps to maintain consistent tolerances and a finer surface finish. For operations where dimensional accuracy matters, the higher stiffness directly translates into fewer rejects and reduced rework, improving part throughput and predictable process capability. Coolant-fed design for longer tool life and cleaner chips The integrated internal coolant channel feeds cutting fluid directly to the cutting edge, cooling the insert and flushing chips away from the cutting zone. This targeted coolant delivery reduces thermal load on the cutting edge and improves chip breaking when paired with DCMT 0702 indexable inserts, extending insert life and maintaining cutting performance over longer cycles. The bar presents a shank Ø12 mm interface for secure clamping, ensuring the coolant path is aligned and effective under typical workshop conditions. Workshop-ready details that simplify setup Practical features minimise downtime: the insert is secured with a Torx screw (T8) sized M2.5x5.5, and the tool offers a cutting height 9 mm for straightforward insert alignment. The assembly is intended for right-hand cutting, and the component carries the ISO designation E12M SDUCR 07, which aids identification and tool planning. The lightweight construction (approx. 0.1 kg) eases handling during set-up and tool changes, while the compatibility with standard indexable inserts keeps inventory simple and reduces the variety of spares required. For precision turning with assured coolant delivery choose the Teknik Makina KE31TM — contact Metav Werkzeuge in Emmerich for technical advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: KE31TM Manufacturer: Teknik Makina ISO designation: E12M SDUCR 07 Material: solid carbide Diameter: 16 mm Overall length: 150 mm Shank diameter: 12 mm Weight: 0.1 kg Cutting direction: right Internal coolant: yes Compatible inserts: DCMT 0702 Cutting height: 9 mm Torx key: T8 Torx screw: M2.5x5.5 Core data Ø: 16 mm Length: 150 mm Shank Ø: 12 mm Weight: 0.1 kg Cutting height: 9 mm Special features Solid carbide construction Internal coolant channel DCMT 0702 insert compatibility ISO: E12M SDUCR 07 Right-hand cutting Torx fastening system T8 / M2.5x5.5 FAQ Which inserts are compatible with this boring bar? The bar is designed for DCMT 0702 indexable inserts; pairing these inserts with the internal coolant channel supports effective chip control and tool life. Does the tool provide internal coolant supply? Yes, the KE31TM features an internal coolant channel that delivers cutting fluid directly to the insert seat to reduce heat and improve chip evacuation. What shank size is required for mounting? The holder uses a shank Ø12 mm interface for clamping; this dimension is important when selecting toolholders or adaptors. Is the boring bar suitable for finishing operations? With its solid carbide construction and stiff Ø16 profile, the holder is well suited to precision finishing and light to medium turning tasks where reduced vibration is needed. How is the insert secured in the holder? The insert is fastened using a Torx screw (T8) of size M2.5x5.5, providing a reliable clamping method for repeatable positioning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drill Bar SDUC With Coolant, Solid Carbide, Left-Hand DCMT 0702 Compatible - Teknik Makina
Benefit from the combination of solid carbide durability, internal coolant for improved chip evacuation and the practical left‑hand cutting orientation for specialised setups — these features ensure reliable performance and consistent hole quality in CNC turning operations; order the tool directly via Metav Werkzeuge or contact our consultants for tailored advice. E12M SDUCL 07 drill bar (SDUC with internal coolant) by Teknik Makina The E12M SDUCL 07 is a solid‑carbide drill bar designed for left‑hand cutting with an internal coolant channel, intended for CNC turning applications using indexable inserts Solid carbide construction Internal coolant supply Compatible with DCMT 0702 inserts Left‑hand cutting orientation Durable material for repeatable results Constructed from solid carbide, this drill bar delivers exceptional stiffness and wear resistance, which translates into consistent hole quality and extended tool life in high‑volume machining. The monolithic design reduces vibration compared to multi‑component holders and helps maintain positional accuracy during deep cuts. For operations where dimensional stability is critical, the robust material choice minimises rework and supports predictable cycle times. The result is fewer tool changes and a steadier production flow with measurable efficiency gains. Coolant‑through design to maintain cycle efficiency The integrated internal coolant channel directs coolant precisely to the cutting zone, improving lubrication and chip control while reducing thermal distortion. By flushing chips away from the insert and flank edges, the coolant‑through arrangement helps preserve insert geometry and lowers the risk of built‑up edge formation. For practical purposes, this means longer insert life and fewer unscheduled stops for cleaning; the feature is particularly beneficial when machining materials that generate long, stringy chips or when higher cutting parameters are required to meet productivity targets. Practical compatibility and fit for CNC turning Engineered for indexable insert turning, the tool accepts DCMT 0702 inserts and features a 12 mm shank for compact toolholder mounting. The left‑hand cutting orientation suits specialised turning setups where reverse rotation or specific toolpaths are required. With a 16 mm diameter and 150 mm overall length, the bar balances rigidity and reach for common turning and drilling tasks. The compact form factor, combined with standard insert interface and Torx fastenings, simplifies maintenance and insert replacement, supporting a smooth workflow at the machine. Contact Metav Werkzeuge today for a consultation on how Teknik Cutting Tools' E12M SDUCL 07 drill bar can be integrated into existing turning operations and to secure reliable supply from Emmerich Technical Data Article number: KE41TM Manufacturer: Teknik Makina ISO designation: E12M SDUCL 07 Name: Bohrstange / SDUC with Coolant Facts Diameter: 16 mm Overall length: 150 mm Shank diameter: 12 mm Cutting height: 9 mm Weight: 0.1 kg Special features Material: Solid carbide Internal coolant: Yes Compatible inserts: DCMT 0702 Cutting direction: Left‑hand Torx key: T8 Torx screw: M2,5x5,5 FAQ What insert type does this drill bar use? The drill bar is specified for use with DCMT 0702 indexable inserts and is optimised to secure and support that insert geometry for turning and drilling tasks. Is the coolant channel suitable for high‑pressure supply? The tool features an internal coolant channel designed to direct fluid to the cutting zone; coolant pressure compatibility should be checked against machine specifications before high‑pressure use. Can this tool be mounted in standard toolholders? The 12 mm shank dimension allows mounting in compact toolholders designed for 12 mm shanks; confirm clamping specifications of the toolholder to ensure proper fit. Which materials is the bar best suited for? With its solid carbide construction and coolant‑through capability, the bar is well suited to a range of metals where chip control and thermal stability are required, improving insert life and surface finish. Does the left‑hand cutting orientation affect insert selection? Left‑hand cutting requires inserts and seatings intended for reverse cutting directions; the bar is supplied for left‑hand turning and should be paired with inserts and holders specified for that orientation. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drill Bar Set With Optional Internal Coolant, Left-Hand For DC-0702 Inserts - Teknik Makina
Take advantage of a compact, versatile boring solution that combines an internal coolant option with a left‑hand cutting configuration to improve chip control and extend insert life; the three‑bar set provides coverage across the 12–20 mm range for flexible workshop use. Order or request configuration advice via Metav Werkzeuge for a tailored supply and reliable delivery. Boring bar set IPS05TM by Teknik Makina — internal‑coolant option, left‑hand cutting A Boring bar set IPS05TM designed for indexable‑insert machining in production and workshop environments, available with or without internal coolant. Internal coolant option for better chip evacuation Left‑hand cutting direction for specialised operations Compatible with DC--0702 indexable inserts Includes three bar models covering 12–20 mm Faster cycles and longer tool life through coolant management The combination of an internal coolant option and proven bar geometry reduces temperature at the cutting edge, which in turn lowers tool wear and enhances process stability. For industrial operations where cycle time and repeatability matter, this configuration is a direct route to improved efficiency: coolant channels improve chip evacuation and heat dissipation, helping to maintain cutting conditions over longer runs. The design is suited to serial boring and finishing passes where consistent surface quality and predictable insert life are required. Designed for indexable inserts and straightforward handling Compatibility with DC--0702 indexable inserts ensures a wide availability of cutting grades and chipbreakers for different workpiece materials. The system uses standard fastening hardware (Torx key T8, screw M2.5×5.5) for secure clamping and quick exchange of inserts. This means minimal downtime during insert changes and clear advantages in tool maintenance routines. The left‑hand orientation enables specific machine setups and is beneficial where machining strategy requires counter‑directional forces. What the set contains and typical applications The kit contains A10J SDUCL 07, A12K SDUCL 07 and A16M SDUCL 07, providing a practical spread of bar lengths and overhangs for internal machining tasks. The set covers a diameter range of 12–20 mm and is supplied as a compact, balanced offering for workshops that demand flexibility without excess inventory. Typical applications include light to medium boring operations in steels and general engineering materials where indexable insert solutions are preferred for cost‑effective finishing and roughing. Practical installation, maintenance and workshop integration Assembly and maintenance follow standard practice for indexable‑insert tooling: verify insert seating, tighten screws with the supplied Torx key to the appropriate torque, and inspect coolant passages before first use. Periodic checks maintain performance and reduce the risk of runout or loosening. For workshops integrating new tooling concepts, the set’s straightforward compatibility with DC--0702 inserts simplifies tool crib standardisation and reduces training time for machine operators. For a reliable tooling configuration and supply via Metav Werkzeuge, request assistance to confirm whether the Teknik Cutting Tools IPS05TM set with internal coolant suits the intended machines and inserts. Technical data Article number: IPS05TM Manufacturer: Teknik Makina Content: A10J SDUCL 07, A12K SDUCL 07, A16M SDUCL 07 Weight: 0.45 kg Internal coolant: yes Cutting direction: left Compatible inserts: DC-- 0702 Torx key: T8 Torx screw: M2.5x5.5 Set: yes Core data Weight: 0.45 kg Pieces per set: 3 Diameter range: 12–20 mm Torx key size: T8 Torx screw size: M2.5x5.5 ECLASS: 21189217 Special features Internal coolant option Left‑hand cutting configuration Compatible with DC--0702 indexable inserts Includes three bar models for varied coverage Compact set for workshop flexibility FAQ Which inserts fit this boring bar set? The set is compatible with DC--0702 indexable inserts; the bars accept standard DC--0702 geometry for a wide range of grades and chipbreakers. Does the set include coolant capability? Yes, the IPS05TM series is supplied with the option for internal coolant, enabling direct flushing at the cutting edge for improved chip control. What is contained in the set? The kit contains A10J SDUCL 07, A12K SDUCL 07 and A16M SDUCL 07, offering a practical spread of bars that cover the 12–20 mm range. Is the cutting direction left‑handed and why does that matter? The bars are specified for left‑hand cutting, which is important for machine setups and cutting strategies that require counter‑directional tool rotation or particular chip flow characteristics. What fastening hardware is required for inserts? Insert clamping uses a Torx T8 key and screws sized M2.5×5.5, which are compatible with standard workshop accessory kits and simplify insert replacement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drill Rod SCLC With Coolant, Solid Carbide, Left-Handed 12mm Shank - Teknik Makina
Take advantage of the combination of solid carbide rigidity, internal coolant delivery, and precise ISO mounting for reliable bore finishing and reduced vibration. Order this Teknik Makina tool directly via Metav Werkzeuge or consult our specialists for application advice and fast supply. Boring bar SCLC with Coolant — Solid carbide boring bar with internal coolant, left-hand cutting by Teknik Makina The Boring bar SCLC with Coolant is a left-hand indexable boring bar designed for precision internal turning and bore finishing in CNC turning centres and lathes Solid carbide construction for rigidity Internal coolant for improved chip evacuation Compatible with CC--0602 indexable inserts Left-hand cutting for specific turning orientations Stable machining through a rigid, all-carbide build The solid carbide body provides high torsional stiffness and damping for consistent bore geometry and improved surface finish. With a 16 mm diameter and 150 mm overall length, the bar balances reach with stability to reduce chatter in demanding operations. The ISO designation E12M SCLCL 06 denotes a standardised mounting form that facilitates repeatable set-up and interchangeability on modern toolholders. This construction helps maintain concentricity and contributes to predictable tool life under normal machining parameters. Controlled cooling and chip flow for longer tool life Integrated internal coolant channels direct cutting fluid to the cutting edge, supporting efficient cooling and chip evacuation where it matters most. Combined with compatibility for CC--0602 indexable inserts and a cutting height 7 mm, the design improves temperature control at the cutting zone and reduces built-up edge formation. Better coolant delivery and effective chip control translate into longer insert life and fewer interruptions for clearing chips, resulting in higher process uptime and more consistent bore finishes. Quick setup and maintenance to reduce downtime The bar’s 12 mm shank diameter and the use of a standard Torx T8 key with M2.5x5.5 torque screw allow straightforward installation and secure clamping of indexable inserts. Lightweight at 0.2 kg, the tool is easy to handle during setup while remaining dimensionally stable in the holder. Left-hand cutting orientation is suitable for specific turning strategies and toolpath directions. The straightforward fixings and standard ISO form factor speed changeover and help to keep set-up times low in serial and batch production. Discuss Teknik Makina’s SCLC boring bar with Metav Werkzeuge for tailored supply and rapid delivery from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: KE19TM Manufacturer: Teknik Makina ISO designation: E12M SCLCL 06 SKU: KE19TM Core dimensions Diameter: 16 mm Overall length: 150 mm Shank diameter: 12 mm Cutting height: 7 mm Weight: 0.2 kg Features & materials Solid carbide Internal coolant Left-hand cutting Compatible with CC--0602 inserts Torx screw M2.5x5.5, Torx key T8 For indexable insert boring FAQ What inserts fit this boring bar? The Teknik Makina boring bar SCLC with Coolant accepts CC--0602 indexable inserts; insert selection should match the required radius and cutting data for the material being machined. Is the coolant fed through the tool? Yes — the bar features internal coolant channels that deliver fluid directly to the cutting edge to improve cooling and chip evacuation. What is the mounting standard for the bar? The bar uses the ISO designation E12M SCLCL 06, which defines the mounting geometry for secure and repeatable installation in compatible toolholders. Which cutting direction is this tool designed for? This tool is specified for left-hand cutting, suitable for operations where the tool advances in a left-handed orientation relative to the workpiece rotation. What are the key assembly components required? Assembly requires the supplied Torx screw specification M2.5x5.5 and a T8 Torx key for insert clamping; the bar’s 12 mm shank aligns with matching collets or holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drill Rod SDQC With Coolant, Solid Carbide, Left-Hand, Ø16mm - Teknik Makina
Take advantage of a rigid solid‑carbide design combined with internal coolant to maintain stable cutting conditions and extend tool life; the compact 12 mm shank and 150 mm overall length allow flexible integration into existing toolholders. Order directly via Metav Werkzeuge or consult our team for application advice. SDQC Boring Bar with Coolant (E12M SDQCL 07) — Teknik Makina — 16 mm diameter, 150 mm overall length The SDQC Boring Bar with Coolant is a left‑hand, solid‑carbide boring bar with integrated internal coolant, engineered for secure use with indexable inserts in precision turning and finishing tasks Internal coolant for optimised cooling Solid‑carbide construction for high rigidity Compatible with DCMT 0702 inserts 12 mm shank, compact 150 mm overall length Precision and rigidity for stable bore finishing Built from solid carbide, this boring bar provides high rigidity and minimal deflection, which matters when maintaining tight tolerances in turning operations. The 16 mm tool diameter combined with a 150 mm overall length reduces vibration and improves surface finish compared with longer or less rigid holders. A 9 mm cutting height ensures secure seating of indexable inserts and consistent contact geometry, helping to achieve repeatable results in serial production or one‑off precision work. Optimised cooling and secure clamping for longer tool life The integrated internal coolant delivers fluid directly to the cutting zone, reducing heat build‑up and aiding chip evacuation; this extends insert life and improves surface quality in demanding cycles. The bar is designed for DCMT 0702 indexable inserts and uses a reliable clamping screw (M2.5x5.5) secured with a T8 Torx key for quick, repeatable insert changes. Left‑hand cutting orientation suits specific lathe setups and machining strategies, enabling predictable chip flow and process stability. Practical integration and production benefits With a 12 mm shank diameter and the ISO designation E12M SDQCL 07, the tool is straightforward to catalogue and fit into common holders, aiding machine uptime and inventory control. Weighing only 0.1 kg, it is easy to handle during setup while remaining robust in operation. The combination of targeted coolant delivery and a solid‑carbide body reduces the need for frequent intervention, supporting a more efficient machining process and fewer unscheduled stops on the shop floor. Contact Metav Werkzeuge today for tailored application advice and reliable supply from Emmerich; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: KE61TM Brand: Teknik Makina ISO designation: E12M SDQCL 07 Material: Solid carbide Dimensions & measurable data Diameter: 16 mm Overall length: 150 mm Shank diameter (d): 12 mm Cutting height: 9 mm Weight: 0.1 kg Features & compatibility Compatible inserts: DCMT 0702 Internal coolant: Yes Cutting direction: Left‑hand Torx key size: T8 Clamping screw: M2.5x5.5 SKU: KE61TM FAQ Which inserts fit this boring bar? The SDQC boring bar accepts DCMT 0702 indexable inserts; the geometry and 9 mm cutting height are matched to that insert size for secure seating and consistent cutting performance. Is the coolant supplied through the bar or externally? Coolant is supplied through the bar via its internal coolant channel, directing fluid to the cutting zone to reduce temperature and improve chip control. Can the bar be used in a standard holder with a 12 mm shank? Yes, the bar features a 12 mm shank diameter and the ISO designation E12M SDQCL 07, making it compatible with holders that accept a 12 mm shank. What is the cutting direction and why does it matter? This tool is left‑hand cutting; that orientation must match the lathe programme and fixturing to ensure correct chip flow and secure engagement. How are inserts secured and which tool is required for changes? Inserts are secured with an M2.5x5.5 clamping screw tightened using a T8 Torx key for repeatable, secure clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drilling Bar A16M SCLCL Left-Hand, Internal Coolant - Teknik Makina
Benefit from a rigid, ISO‑compliant holder that combines precise clamping with internal coolant delivery to improve insert life and surface finish; order the A16M SCLCL boring bar directly via Metav Werkzeuge or consult the technical team for application advice. A16M SCLCL boring bar – left‑hand holder with internal coolant by Teknik Makina, compatible with CC-- 09T3 inserts A16M SCLCL is a left‑hand indexable insert holder designed for reliable turning operations with internal coolant and a 95° cutting geometry Internal coolant supply 95° cutting angle for secure cutting Compatible with CC-- 09T3 inserts 16 mm shank, 150 mm overall length Precision and compatibility for dependable turning results The A16M SCLCL boring bar is engineered as an ISO‑style insert holder for CC-- 09T3 indexable inserts, offering a standardised interface that simplifies tool selection and repeatable set‑up in production environments. The left‑hand cutting orientation and the 95° cutting angle promote stable engagement at the insert nose, which translates into consistent surface finish and predictable tool life. For procurement planning, the holder’s ISO designation ensures compatibility with common tool posts and turret systems used in turning centres. Improved cooling and chip control for longer insert life Built‑in internal coolant directs lubricant and coolant directly to the cutting zone, aiding heat dissipation and chip formation; this reduces thermal loading on the insert and improves dimensional stability during extended cuts. The combination of targeted coolant flow and the holder’s geometry supports efficient chip evacuation, which lowers the frequency of insert changes and contributes to reduced machine downtime. These technical advantages deliver measurable workflow benefits in repetitive turning tasks where thermal control and chip management are critical. Rigidity and handling that support workshop productivity A 16 mm shank diameter combined with a 150 mm overall length provides a balance of rigidity and reach for medium‑duty turning and finishing operations. The modest mass (approx. 0.227 kg) and compact dimensions improve accessibility in tight setups while maintaining secure clamping via the 09 designated clamping system. The tool’s construction focuses on mechanical stability to minimise vibration and run‑out, resulting in improved repeatability across batches. For integration into existing tool inventories, the clear dimensional data and ISO coding facilitate straightforward tool management and replacement. Contact Metav Werkzeuge for application matching, detailed drawings or to arrange a tailored supply of Teknik Makina A16M SCLCL holders through their Emmerich service team Technical Data Article number: KA239TM Manufacturer: Teknik Makina ISO designation: A16M SCLCL Compatible inserts: CC-- 09T3 Facts Shank diameter: 16 mm Overall length: 150 mm Diameter: 20 mm Cutting edge height: 30 mm Weight: 0.227 kg Cutting angle: 95° Special features Internal coolant Left‑hand cutting direction Compatible with CC-- 09T3 indexable inserts Clamping designation: 09 FAQ What insert type fits this holder? The A16M SCLCL holder is specified for CC-- 09T3 indexable inserts and accepts standard inserts of that form factor for turning applications. Is the coolant internal or external on this tool? This Teknik Makina holder features internal coolant, delivering fluid directly to the cutting zone to support temperature control and chip evacuation. What are the key mounting dimensions for machine setup? Key dimensions: 16 mm shank diameter, 150 mm overall length, 20 mm body diameter; these values allow planning for rigidity and clearance in turret or tool post mounting. Can this holder be used for finishing cuts? Yes; the 95° cutting geometry and targeted coolant supply make the holder suitable for finishing or light to medium turning where surface quality and thermal stability are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Drilling Bar SCLC With Coolant, Solid Carbide Set 10-16mm - Teknik Makina
Take advantage of a hard-wearing, production-ready solution that combines solid carbide construction with an internal coolant channel for extended tool life and improved surface finish; the three-piece set covering 10–16 mm diameters ensures quick diameter changes and consistent performance. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. IPS30TM Boring Bar Set – SCLC with Coolant, Solid Carbide (10–16 mm) by Teknik Makina A IPS30TM boring bar set engineered for right-hand external turning with through-coolant capability, compatible with CC-- 0602 indexable inserts and suited to CNC turning and precision workshops Solid carbide construction Internal coolant supply Set covers Ø 10–16 mm Compatible with CC-- 0602 inserts Right-hand cutting direction Consistent bore quality through rigid, carbide construction The set is manufactured from solid carbide, delivering high stiffness and thermal stability that reduce vibration and minimise bore deviation in serial production. Carbide's intrinsic hardness keeps cutting edges geometric for longer, which translates into fewer re-grinds and steadier tolerances on turned components. For machinists and production engineers, this means a reliable tooling solution that maintains bore concentricity and repeatable diameters across batches, improving first-pass yield and process stability. Coolant-through design improves tool life and surface finish An integrated internal coolant channel directs cutting fluid precisely to the insert cutting zone, lowering edge temperatures and supporting efficient chip breakage. Reduced thermal load diminishes flank wear and crater formation, extending insert life and preserving surface quality. When paired with compatible CC-- 0602 inserts, the coolant-through feature helps maintain consistent cutting conditions under elevated cutting speeds typical of modern turning centres, enabling longer uninterrupted cycles and fewer tool changes per shift. Practical set coverage and workshop-ready accessories The three-piece set covers the common diameter range 10–16 mm, providing immediate flexibility for small- to medium-diameter boring tasks. The kit is supplied with the required fixing hardware specification — Torx key T8 and Torx screw M2.5x5.5 — for secure insert clamping and quick replacement. With a compact net weight of 0.53 kg, the set is easy to handle and store at the machine station. Right-hand cutting geometry suits standard lathe configurations and typical feed directions, simplifying integration into existing tooling arrays and reducing setup time. Compatibility and application guidance for process planners The design is optimised for turning centres and lathe operations where rigid tool support and internal coolant are priorities. The toolholders accept CC-- 0602 inserts, a widely used insert family allowing process planners to select grades and coatings tailored to specific materials and cutting conditions. The combination of a carbide bar body and coolant-through capability supports machining of steels and alloyed materials where thermal control and chip evacuation are critical. For precise insert selection and cutting data, please consult Metav Werkzeuge’s technical advisors to match insert grade, speeds and feeds to the workpiece material. For ordering, technical clarification or application advice on the Teknik Cutting Tools IPS30TM boring bar set, contact Metav Werkzeuge directly — Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com — Metav’s specialists will recommend the optimal insert grade and setup for the intended application. Technical data Article number: IPS30TM SKU: IPS30TM Manufacturer: Teknik Makina Data Set size: 10–16 mm Pieces per set: 3 Weight: 0.53 kg Special features Material: solid carbide Coolant-through: internal coolant Compatible inserts: CC-- 0602 Cutting direction: right-hand Torx key: T8 Torx screw: M2.5x5.5 FAQ Which insert type fits this boring bar set? The IPS30TM set accepts CC-- 0602 indexable inserts; match the insert grade to the workpiece material for optimal wear resistance and surface finish. Is the coolant supplied through the boring bar? Yes, the toolholders feature an internal coolant channel that delivers fluid directly to the cutting edge to aid cooling and chip control. For which diameters is the set suitable? The kit covers the 10–16 mm diameter range, provided as a three-piece set to allow quick adaptation across common small-bore sizes. Can this set be used on standard CNC lathes? The IPS30TM tooling is intended for conventional CNC turning applications with right-hand cutting orientation and is compatible with machines equipped for coolant-through tooling. What fastening hardware is included or required? Insert clamping uses a Torx screw of size M2.5x5.5, and a Torx key T8 is specified for secure insert retention. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm E12M SDQCR 07 Solid Carbide Boring Bar SDQC With Coolant, Right-Hand - Teknik Makina
Take advantage of the combination of solid carbide rigidity, internal coolant delivery, and compact overall length for steady, repeatable boring results; order supply and technical advice via Metav Werkzeuge for reliable European distribution. KE51TM Insert boring bar — SDQC with internal coolant, solid‑carbide The KE51TM SDQC with Coolant is a right‑hand, solid‑carbide insert boring bar designed for precision insert turning and boring operations using DCMT 0702 indexable inserts. Solid carbide design for rigidity Internal coolant delivery for better cooling Compatible with DCMT 0702 indexable inserts 12 mm shank, 16 mm cutting diameter Stable machining with a solid‑carbide body for repeatable results The compact, monolithic construction delivers higher stiffness compared with multi‑piece assemblies, reducing chatter during interrupted cuts and improving surface finish. With a 16 mm diameter and a 12 mm shank, the tool is engineered for confined setups where rigidity matters; the modest weight (0.1 kg) and 150 mm overall length allow quick tool changes and easier balancing on turrets. This stability translates into longer effective tool life for the cutting edges and lower scrap rates, which supports efficient production planning and consistent part quality. Consistent temperatures and chip control via internal coolant Integrated internal coolant channels feed cutting fluid directly to the tool tip, lowering cutting temperature and aiding chip evacuation. The immediate cooling effect helps preserve insert geometry and reduces thermal expansion in the tool holder, which in turn keeps tolerances stable across long runs. For shops that prioritise process reliability, this coolant delivery method reduces manual rework and contributes to predictable cycle times — a practical advantage for batch production and repeat orders. Fast insert changes and clear mechanical interfaces The holder accepts DCMT 0702 indexable inserts and uses a secure Torx fastening system (key T8, screw M2.5 x 5.5) for rapid, repeatable clamp force during index changes. The tool offers a cutting height of 9 mm, which aligns with common insert geometries and simplifies set‑up. Clear, standardised interfaces mean less downtime for insert replacement and fewer alignment checks between tool swaps, supporting leaner workshop routines and higher machine utilisation. Practical fit‑for‑purpose design for controlled environments Designed as an ISO‑identified component (E12M SDQCR 07) and configured for right‑hand cutting, this insert holder is suited to operations that require compact reach and direct coolant supply. The combination of a short overall length and internal cooling reduces the need for secondary chip‑management steps and helps maintain tool integrity in repeated cycles. As a consequence, set‑up times are reduced and maintenance intervals can be extended, contributing to a smoother production flow without adding complexity to existing tooling systems. Contact Metav Werkzeuge for availability and technical advice on the Teknik Makina KE51TM insert boring bar — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for supply from Emmerich and guidance on integration into existing tooling setups. Technical data SKU: KE51TM ISO designation: E12M SDQCR 07 Manufacturer: Teknik Cutting Tools / Teknik Makina Facts Diameter: 16 mm Shank diameter: 12 mm Overall length: 150 mm Cutting height: 9 mm Weight: 0.1 kg Special features Material: solid carbide Internal coolant: yes Compatible inserts: DCMT 0702 Cutting direction: right‑hand Torx key: T8 Torx screw: M2.5 x 5.5 FAQ Which inserts fit this insert holder? The Teknik Makina KE51TM insert boring bar is specified for DCMT 0702 indexable inserts. Does the tool provide coolant through the body? Yes — the holder features internal coolant channels to deliver fluid directly to the cutting zone. What is the shank diameter and overall length? Shank diameter is 12 mm and overall length is 150 mm, optimised for compact setups. What cutting direction is the holder designed for? This variant is configured for right‑hand cutting as indicated by its SDQC designation. Which fastening system secures the inserts? Inserts are clamped with a Torx screw; required tools are T8 for the key and M2.5 x 5.5 for the screw. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Achieve exact bores with a boring bar with internal coolant
A boring bar with internal coolant is a specialised tool for internal machining on lathes and machining centres, designed to enlarge and finish existing holes to precise dimensional and form tolerances. Also referred to as an internal coolant boring bar or coolant‑fed boring bar, this tool class routes coolant through the tool body so that cutting edges are supplied directly with fluid under pressure.
How internal coolant keeps deep and blind bores reliable
When machining with external coolant only, the fluid is delivered from outside via machine nozzles and often fails to reach the cutting zone in longer bores, leaving chips trapped and increasing thermal load. A boring bar with internal coolant contains axial coolant channels that run through the tool shank to the cutting edge, delivering high‑pressure coolant where it is needed. This arrangement is essential for machining deep bores, blind holes and for materials that produce long, continuous chips; it lowers local temperatures, flushes chips out of the bore and reduces the risk of tool breakage and surface damage.
Key advantages that improve productivity
- Faster cycle reliability: internal coolant reduces thermal distortion and helps maintain tight tolerances over longer runs.
- Improved chip evacuation: pressurised coolant clears chips from the cutting zone, preventing chip clogging and re-cutting.
- Extended tool life: cooler cutting edges and effective flushing reduce wear and the likelihood of catastrophic tool failure.
- Process versatility: suitable for deep bores and blind holes, especially in difficult‑to‑machine or long‑chipping materials.
Metav as the practical partner for precision tooling
Metav stands for the democratisation of precision and is positioned as a pragmatic partner for industry and workshops. Based in Emmerich, Metav combines hands‑on technical expertise with a broad supply range: over 250,000 products and a proven track record with more than 48,000 customers, ensuring steady availability and a quality filter for the European market. For buyers seeking coolant‑fed solutions, Metav offers curated assortments and selection guidance for boring bars with internal coolant.
In summary, a boring bar with internal coolant delivers targeted cooling and chip control that is indispensable for deep and blind bores, improving tolerance control, tool life and process stability.
FAQ
When should a boring bar with internal coolant be chosen over external coolant?
Select a boring bar with internal coolant whenever bores are deep or blind, or when machining hard‑to‑cut or long‑chipping materials; the internal coolant ensures reliable chip evacuation and temperature control where external coolant cannot reach.
How do axial coolant channels reduce the risk of tool breakage?
Axial coolant channels feed high‑pressure coolant directly to the cutting edge, lowering thermal stress at the point of generation and flushing chips away, which together reduce flank wear and the chance of sudden tool failure when using a boring bar with internal coolant.
Can internal coolant boring bars be used on both lathes and machining centres?
Yes. The internal coolant design is compatible with standard toolholders used on lathes and machining centres, making the internal coolant boring bar a flexible choice across machine platforms.
Which workpiece materials benefit most from coolant‑fed boring bars?
Materials that produce long, continuous chips or that are prone to thermal softening during cutting—such as certain stainless steels and high‑strength alloys—benefit markedly from the chip flushing and cooling provided by a boring bar with internal coolant.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com