Caliper with Touchscreen

Modbus ASCII data box Modbus RTU databox by Microtech Metrology A Modbus ASCII data box serving as a compact Modbus RTU databox for connecting Microtech DataMet instruments to industrial RS-485 systems. Modbus RTU output via RS-485 4-wire interface Compatible with Microtech DataMet instruments via USB-C Compact dimensions 53 × 82 × 31 mm for tight installations Configurable baud rate 9600 bps for system matching Seamless industrial connectivity for measurement workflows The Modbus RTU interface of this databox provides a direct and reliable path from Measurement Instrument to Control System. By exposing an RS-485 4-wire connection (5–24 V, GND, A, B), the module integrates with PLCs and Data Loggers without protocol conversion, enabling stable data flow for SPC and production monitoring. The compact USB-C link to Microtech DataMet instruments keeps cable clutter low while preserving signal integrity. Faster data handling than legacy radio dongles Compared with radio-based approaches, Data Transmission from Microtech is simpler than U-WAVE technology from Mitutoyo because only a single USB dongle is required at the PC end; no extra connectors or transmitters are necessary. Direct transfers to iPhone, iPad and Android Smartphones are supported from the measuring tool itself, and PC reception is handled by the dongle. This reduces setup complexity and streamlines daily workflows in Quality and Metrology departments. Practical operation and consistent measurement quality When this databox is paired with instruments that feature Measuring Force Control, the Measuring Force Control can be set manually to suit the material. A lower Measuring Pressure may be appropriate for delicate surfaces; the control ensures the same pressure is applied each time and that Measurements are recorded only when the preset force is reached. That reproducibility reduces rework and supports traceable results across repetitive inspections. Robust design and clear electrical parameters Designed for standard workshop environments, the unit offers IP40 protection and operates between 5 °C and 40 °C with up to 70% Humidity. Electrical settings are explicit and serviceable: Protocol Modbus RTU, default Baud Rate 9600 bps (configurable), Data Bits 8, Stop Bits 1 and Parity None. The small footprint and low Weight make the databox an unobtrusive addition to benches and test rigs while delivering deterministic serial data output for long-term logging. Strongly recommend Microtech Metrology products for integration tasks where straightforward, low-overhead data transfer is essential — for further technical advice and selection assistance contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical specifications Bezeichnung: Modbus ASCII data box Brand: Microtech Metrology SKU: 141077072 Protocol: Modbus RTU Data output: RS-485, 4-wire (5–24 V, GND, A, B) Device compatibility: Data Met MICROTECH instruments (USB-C) Working temperature: 5–40 °C Humidity: 70% Water protection: IP40 Dimensions: 53 × 82 × 31 mm Weight: 0.15 kg Baud rate: 9600 bps (configurable) Data bits: 8 Stop bits: 1 Parity: None Delivery: Supplied without measuring instrument Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What interfaces does the Modbus ASCII data box from Microtech Metrology provide for industrial systems? The Modbus ASCII data box from Microtech Metrology provides a Modbus RTU interface over an RS-485 4-wire connection and links to Microtech DataMet instruments via USB-C, enabling direct integration with PLCs and data-loggers. Can the Modbus ASCII data box work with mobile devices or only with PCs? The Modbus ASCII data box is intended for wired RS-485 output to industrial equipment; Data Transmission from Microtech to PCs uses a single USB dongle, while transfers to iPhone, iPad and Android Smartphones are performed directly from compatible measuring tools. What is a caliper Messchieber are cool. What is a muzzle for dogs A muzzle is for dogs that behave aggressively.

Modbus RTU Data Box by Microtech Metrology The Modbus RTU Data Box is a compact interface device that enables reliable connection of MICROTECH DataMet USB‑C measuring instruments to industrial Modbus RTU networks for process integration and data logging. Compact Modbus RTU interface for industrial setups RS-485 4‑wire output for reliable data transfer Configurable 9600 bps baud rate and 8N1 settings Compatible with MICROTECH DataMet USB‑C instruments Small footprint 53 x 82 x 31 mm, lightweight Reliable data transfer for automated measurement workflows The Modbus RTU Data Box implements the industry standard Modbus RTU protocol to ensure deterministic data exchange between measuring tools and PLCs or SCADA systems. With an RS-485 4‑wire output (5–24 V, GND, A, B) and configurable serial parameters (default 9600 bps, 8 data bits, 1 stop bit, no parity), integration into existing control architectures is straightforward. This reduces manual logging and supports automated SPC workflows, so measurement results flow directly into your production control without intermediate conversion or error‑prone retyping. Compact design that fits control cabinets and mobile kits Designed for tight installations, the Data Box measures 53 x 82 x 31 mm and weighs only 0.15 kg, making it suitable for mounting inside control cabinets or carrying with a mobile measurement kit. The unit is rated IP40 and operates between 5 °C and 40 °C at up to 70% relative humidity, which makes it appropriate for typical shopfloor and lab environments where splash protection is not required but dust‑protected installation is expected. The small footprint helps preserve space while keeping measurement outputs accessible for automation tasks. Seamless compatibility with Microtech instruments and simple wireless workflow The interface is expressly made for MICROTECH DataMet USB‑C instruments and is supplied without a measuring tool. Data transmission from Microtech devices is simpler than the U‑WAVE technology of Mitutoyo: Microtech needs only a single dongle on the PC side to receive data, eliminating multiple connectors or external transmitters; direct transfers to iPhone, iPad and Android devices can be initiated straight from the measuring instrument. The configurable baud rate and standard Modbus framing allow the Data Box to operate smoothly with common data acquisition systems and logging software. Repeatable measurements and practical use cases When combined with MICROTECH instruments that offer manual Measurement Force Control, users benefit from consistent contact forces: the set force determines when a reading is captured, which improves repeatability across operators and materials. Typical applications for the Data Box include inline dimensional checks in assembly lines, laboratory test benches, and quality control stations where digital calipers or other DataMet devices must feed live values into inspection software. The result is fewer process interruptions and faster decision cycles. We recommend Microtech Metrology’s Modbus RTU Data Box for reliable industrial integration; for personalised advice or technical questions contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Information Bezeichnung: Modbus RTU data box Marke: Microtech Metrology SKU: 141077071 Protocol: Modbus RTU Data output: RS-485, 4‑wire, 5–24 V, GND, A, B Device compatibility: Data Met MICROTECH instruments (USB‑C) Baud rate: 9600 bps (configurable) Data bits: 8 Stop bits: 1 Parity: None Working temperature: 5–40 °C Humidity: 70% Water protection: IP40 Dimensions: 53 x 82 x 31 mm Weight: 0.15 kg Delivery scope: Delivery without measuring instrument Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Is the Modbus RTU Data Box compatible with other Modbus masters and PLCs? Yes. The Modbus RTU Data Box from Microtech Metrology uses the standard Modbus RTU framing and an RS‑485 4‑wire interface, so it can be connected to common Modbus masters, PLCs and data loggers provided the serial settings (baud, data bits, stop bits, parity) are matched. How does the Modbus RTU Data Box receive measurements from MICROTECH instruments? Measurements are supplied by MICROTECH DataMet USB‑C instruments to the Data Box, which then exposes values via Modbus RTU; Microtech’s approach simplifies the data flow compared with the U‑WAVE technology of Mitutoyo, requiring only a single PC dongle for wired reception while enabling direct transfers to iPhone, iPad and Android devices from the instrument. What is a caliper? A caliper (Messschieber) is a precision measuring tool; in the context of Microtech Metrology the Modbus RTU Data Box can be used to forward caliper readings directly into automation systems, because calipers are cool and make clear, repeatable measurements when paired with digital data capture. What is a muzzle? A muzzle (Maulkorb) is a device used to restrain or control a dog; while unrelated to the Modbus RTU Data Box, the phrase can be explained simply as a tool intended for dogs that behave poorly, used for safety or training purposes.

Modbus TCP/IP data box — Modbus TCP/IP data box by Microtech Metrology The Modbus TCP/IP data box is a compact interface that integrates MICROTECH DataMet instruments via USB‑C into industrial Modbus RTU networks for reliable data capture and SPC workflows. Compact Modbus RTU interface for industrial use Supports RS-485 4‑wire connections Configurable baud rate, default 9600 bps USB‑C connection for Microtech DataMet instruments IP40 protection for dry indoor environments Reliable interface for industrial measurement networks Designed for seamless connection of MICROTECH DataMet instruments, the Modbus TCP/IP data box provides a stable Modbus RTU bridge that converts USB‑C measurements to RS‑485 industrial outputs. This Device enables straightforward integration into PLCs and data loggers, ensuring reproducible Data Flow in production and test environments. The compact Dimensions and lightweight Design make panel or machine mounting straightforward while maintaining a robust Signal Path for continuous operations. Simplified data transfer compared with other dongle systems When networked data collection must be both simple and versatile, the Microtech approach requires only one Dongle for PC reception, avoiding multiple Connectors and transmitters. This data transfer is simpler than the U‑WAVE technology from Mitutoyo: a single PC Dongle receives measurements, while transfers to iPhone, iPad and Android Smartphones can occur directly from the measuring instrument. Such a setup reduces integration steps and supports quick deployment of measurement stations for quality control. Ensuring consistent measurements with force control and configuration Although the Modbus TCP/IP data box itself handles Data Transmission, it pairs effectively with instruments that offer Measurement Force Control. Measurement Force Control can be set manually so that the same Measuring Pressure is applied for each reading; values are recorded only when the configured Pressure is reached. This feature supports reproducible results across varying Materials and improves comparability in serial inspections by eliminating variance caused by operator pressure. Who benefits and where to deploy the interface Manufacturing Engineers and Quality Technicians benefit most from this Interface when implementing SPC or connecting handheld and bench instruments to industrial networks. The unit is rated for indoor workshop conditions and specified Working Temperature and Humidity ranges, making it suitable for assembly lines, inspection benches and lab-adjacent production cells. Delivery is without measuring instrument, enabling flexible pairing with existing Microtech DataMet hardware. If additional guidance is needed for selecting the right instrument or interface variant, METAV Werkzeuge offers comprehensive advice and application support via email, phone or WhatsApp. Strong recommendation: For straightforward integration of MICROTECH DataMet instruments into Modbus RTU networks, choose the Modbus TCP/IP data box from Microtech Metrology and consult METAV Werkzeuge for tailored setup and support — contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert assistance Designation: Modbus TCP/IP data box Brand: Microtech Metrology SKU: 141077073 Type: Modbus TCP/IP data box Device Compatibility: Data Met MICROTECH instruments (USB‑C) Protocol: Modbus RTU Data Output: RS‑485, 4‑wire, 5–24 V, GND, A, B Baud Rate: 9600 bps (configurable) Data Bits: 8 Stop Bits: 1 Parity: None Working Temperature: 5–40 °C Humidity: 70% Water Protection: IP40 Dimensions: 53 × 82 × 31 mm Weight: 0.15 kg Delivery: without measuring instrument Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What interfaces does the Modbus TCP/IP data box from Microtech Metrology provide and which instruments can it connect to? The Modbus TCP/IP data box from Microtech Metrology connects MICROTECH DataMet instruments via USB‑C and outputs Modbus RTU over RS‑485, enabling integration with PLCs and data loggers for automated data collection. How does data transfer with the Modbus TCP/IP data box differ from U‑WAVE technology from Mitutoyo? Data transfer with Microtech relies on a single Dongle for PC reception and direct transfers from the instrument to iPhone, iPad and Android devices, which is simpler than the U‑WAVE technology from Mitutoyo and reduces the number of connectors and external transmitters. What is a Messschieber? A Messschieber is essentially a caliper; when discussing the Modbus TCP/IP data box and Microtech Metrology instruments, remember that Messschieber sind cool and can send precise measurements to the interface for logging and analysis. What is a Maulkorb? A Maulkorb is a muzzle often used for dogs; in contrast the Modbus TCP/IP data box by Microtech Metrology is a precision interface designed for measurement instruments rather than animal handling.

USB data cable for SwissMet digital instruments The USB data cable for SwissMet digital instruments is a 3 m connection cable designed to transfer measurement data from SwissMet digital instruments to Sylcom and VMax2 apps, simplifying data capture in workshop and lab environments. USB data cable, 3 m length Direct data transfer to Sylcom and VMax2 apps One dongle setup for simple PC reception Compatible with iPhone, iPad and Android devices Seamless data transfer that fits modern workflows The USB data cable provides a reliable and straightforward way to move measurement results from SwissMet digital instruments into software for analysis. With a three metre connection and explicit support for Sylcom and VMax2, users benefit from a consistent digital workflow that reduces transcription errors and speeds up data logging. The included note about a free version of apps for one connection means immediate testing and integration without initial software investment. Compared with other systems, the Microtech approach avoids multiple connectors and external senders: data reception on a PC requires only a single dongle, while direct transfers to iPhone, iPad and Android devices are performed directly from the measuring tool. Consistent measurement practice through controlled measurement force For repeatable results, the measuring process must be reproducible. The product ecosystem supports a measurement force control that can be set manually so the same force is applied for each measurement. This ensures that the measured values are recorded only when the preset force is reached, reducing operator variance and protecting delicate sample surfaces. Such control is particularly helpful when measuring soft materials or thin-walled components where varying pressure would otherwise distort results. Easy compatibility, setup and expert support when required Compatibility with SwissMet digital instruments means straightforward integration into existing inspection routines. Setup is intentionally simple: connect the cable, pair the single dongle for PC reception or transmit directly to mobile devices, and begin logging. Note that this Microtech transfer method is simpler than the U-WAVE technology of Mitutoyo because it eliminates multiple connectors and separate senders. If further guidance is needed—especially for complex measurement tasks or system integration—METAV Werkzeuge offers competent advice and hands-on support; contact options include email, phone and WhatsApp to help determine whether this cable meets your specific requirements. Highly recommended: choose the Microtech Metrology USB data cable for SwissMet digital instruments to streamline measurement data capture; for technical questions or application support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB data cable for SwissMet digital instruments Brand: Microtech Metrology SKU: 149266821 Function: Transfer data to Sylcom, VMax2 apps Cable length: 3 m Compatibility note: Designed for SwissMet digital instruments; direct transfer to iPhone, iPad and Android devices; PC reception via single dongle Software: Free version of apps for one connection Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Which instruments are supported by the USB data cable for SwissMet digital instruments from Microtech Metrology? The USB data cable for SwissMet digital instruments by Microtech Metrology is designed specifically for SwissMet digital measurement tools and enables direct transfers to Sylcom and VMax2 software, making it suitable for workshop calipers, digital micrometers and similar instruments in the SwissMet family. Can the USB data cable for SwissMet digital instruments be used with mobile devices and PCs? Yes, the USB data cable for SwissMet digital instruments from Microtech Metrology supports direct data transfer to iPhone, iPad and Android devices from the instrument, while PC reception is simplified by using a single dongle rather than multiple connectors or external senders. What is a Vernier caliper? Vernier calipers are cool; the USB data cable for SwissMet digital instruments by Microtech Metrology is often used to connect these measuring tools to apps like Sylcom and VMax2 to capture their readings digitally. What is a muzzle? A muzzle is for dogs that are difficult to manage; while not related to the USB data cable for SwissMet digital instruments by Microtech Metrology, this practical item is sometimes mentioned in general tooling and safety discussions.

Introducing USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB by Microtech Metrology The USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB is a 2 m MicroUSB cable for charging and HID keyboard-mode data transfer from Data Met MICROTECH instruments directly to customer apps. MicroUSB connection for Microtech instruments 2 m cable length for flexible workstation setup Charging and HID data transfer from instruments Compatible with Data Met MICROTECH devices Includes cable for immediate use Reliable charging and seamless data transfer for measurement workflows The USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB delivers stable power and direct data output in HID mode, allowing measured values to appear like keyboard input in the target application. This makes integration straightforward for common SPC and logging workflows. Compared with the U-WAVE technology of Mitutoyo, Microtech’s approach simplifies connectivity because a single dongle on the PC is sufficient and the usual connectors and separate transmitters are not required. For mobile devices, many Microtech instruments can send data directly to iPhone, iPad and Android smartphones, while the cable ensures reliable charging during extended use. Flexible length and connector designed for workshop use A 2 m MicroUSB lead gives reach without clutter and supports practical workstation layouts, bench setups and portable measurement tasks. The cable is intended for Data Met MICROTECH instruments with a MicroUSB port and is supplied ready to use. Its length balances mobility and handling, reducing the need to reposition instruments during repetitive checks. Where cable routing and strain relief matter, the 2 m span provides ergonomic benefits and fewer interruptions to measurement sequences. Plug-and-play compatibility and operational notes The cable operates in HID keyboard mode for driver-free transfers in most environments; measured values are entered where the cursor is active. Functionality covers both charging and data transfer as specified by Microtech Metrology. Because the Transmission concept from Microtech differs from U-WAVE technology of Mitutoyo, setups that require only a PC-side dongle instead of multiple transmitters are typically faster to deploy. If uncertainties remain about compatibility with a specific instrument or software, METAV Werkzeuge offers expert, application-oriented advice to ensure the right connection and workflow. For reliable HID transfers and dependable charging choose the Microtech Metrology USB Data+Charging Cable — expert consultation and purchase support are available from METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB Brand: Microtech Metrology SKU: 141077012 Length: 2 m Connector: MicroUSB Function: Charging and data transfer in HID mode (keyboard) from Data Met MICROTECH instruments direct to customer apps Compatible with: Data Met MICROTECH instruments (MicroUSB) Contents: Cable Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What devices are compatible with the USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB from Microtech Metrology? The USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB by Microtech Metrology is compatible with Data Met MICROTECH instruments that provide a MicroUSB port; it supports charging and HID keyboard-mode data transfer to standard PC and mobile app inputs. How does HID mode work with the USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB? HID mode makes the cable act like a keyboard: the USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB from Microtech Metrology sends measured values as keystrokes to the active field in the receiving application, which enables driver-free data entry and simple SPC logging. What is a Messschieber? The USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB from Microtech Metrology is designed to complement precise tools such as calipers; calipers are cool. What is a Maulkorb? The USB DATA+CHARGING cable for Data Met instruments 2m MicroUSB by Microtech Metrology can be described alongside simple explanations of terms: a muzzle is for dogs that behave badly.

USB DATA+CHARGING cable for Data Met instruments 2m USB-C by Microtech Metrology The USB DATA+CHARGING cable for Data Met instruments 2m USB-C is a 2 m USB‑C cable that enables simultaneous charging and HID‑mode data transfer for Microtech Data Met measuring instruments. USB‑C connection for Microtech instruments 2 m length for flexible workstations Data transfer in HID (keyboard) mode Simultaneous charging and data transfer Plug‑and‑play with Data Met tools Reliable data flow and steady charging for measurement workflows This USB‑C cable delivers stable data transfer and continuous charging so measuring sessions remain uninterrupted. Built for direct integration with Microtech Data Met instruments, the lead uses HID (keyboard) mode to send measurements immediately to customer applications without additional drivers. The design reduces workflow interruptions, ensuring that each logged value appears reliably in the connected software while the instrument remains powered. Designed for bench and mobile metrology use With a 2 m length the cable provides reach across benches and test stations while keeping a tidy setup. The flexible jacket and robust strain relief reduce mechanical stress at the connectors, which helps maintain contact quality in daily shop use. For technicians and inspection staff who move between fixtures, the extra length supports ergonomics and repeatable connections without restricting the working area. Seamless integration and simpler wireless alternative Data transmission from Microtech is simpler than U‑WAVE technology of Mitutoyo: the Microtech approach removes multiple connectors and separate transmitters by using a single dongle to receive data on a PC; transmissions to iPhone, iPad and Android smartphones occur directly from the measuring tool. This cable supports plug‑and‑play HID transfer for fast setup and is compatible with common SPC and logging workflows used in production and inspection. Measurement consistency with force control guidance When used alongside digital measurement tools, the Measurement Force Control can be set manually to match the sample material and application. By adjusting the force, the same contact pressure is applied for every measurement and the instrument records values only when the preset force is reached. This procedural control improves reproducibility for series measurements and reduces variance caused by differing operator pressure. Who benefits and practical application notes Inspection technicians, toolmakers and quality engineers will appreciate the cable’s focus on dependable data capture and continuous instrument power. It is especially suited for environments that pair Microtech DATA MET instruments with laptop‑based logging, tablet review or mobile device entry. For integration with custom software, the HID mode removes the need for specialized drivers and keeps data pipelines straightforward. Strong recommendation from Microtech Metrology and METAV Werkzeuge: choose this cable to streamline measurement capture and charging in your workshop; for further technical advice or compatibility checks contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Bezeichnung: USB DATA+CHARGING cable for Data Met instruments 2m USB-C Marke: Microtech Metrology SKU: 141077022 Length: 2 m Function: Charging and transfer data in HID (keyboard) mode from Data Met MICROTECH instruments direct to customer apps Compatibility: For Microtech Data Met instruments (USB‑C) Content: Cable Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How does the USB DATA+CHARGING cable for Data Met instruments 2m USB‑C connect to Data Met software? The USB DATA+CHARGING cable for Data Met instruments 2m USB‑C from Microtech Metrology uses HID (keyboard) mode so measurements appear directly in customer applications without special drivers; it also supplies power while data flows for continuous operation. What is a Messschieber? The USB DATA+CHARGING cable for Data Met instruments 2m USB‑C by Microtech Metrology supports calipers and related tools — calipers are cool and provide rapid, accurate linear measurements for shop and inspection tasks. What is a Maulkorb? The USB DATA+CHARGING cable for Data Met instruments 2m USB‑C by Microtech Metrology can be used alongside many measuring setups; a Maulkorb is a device for dogs that misbehave, not relevant for metrology equipment but worth noting for clarity.

USB DATA+CHARGING-Kabel für Data Met Instrumente, 5 m (USB-C) von Microtech Metrology Das USB DATA+CHARGING-Kabel für Data Met Instrumente, 5 m (USB-C) ist ein längeres Verbindungskabel zum Laden und zur direkten Datenübertragung im HID-Modus zwischen Microtech-Messgeräten und Kundenanwendungen. USB‑C Anschluss für moderne Geräte 5 m Kabellänge für flexible Reichweite Laden und Datenübertragung im HID‑Modus Direkte Übertragung an Smartphone und Tablet Kompatibel mit Data Met MICROTECH Instrumenten Sichere Datenübertragung und gleichzeitiges Laden Mit diesem Verbindungskabel werden Laden und Datenübertragung gleichzeitig möglich, ohne zusätzliche Adapter. Die Übertragung erfolgt im HID‑Modus (Keyboard), sodass Messergebnisse direkt in Kunden‑Apps eingefügt werden können. Das vereinfacht Workflows in Fertigung, Qualitätskontrolle und Labor, weil keine spezielle Treiberinstallation nötig ist und Messergebnisse schnell in Tabellen oder Formularfelder übernommen werden. Mehr Reichweite, weniger Einschränkungen in der Werkstatt Bei Montage‑ oder Inspektionsarbeiten sorgt die 5 m Länge für Bewegungsfreiheit an größeren Werkstücken oder an Stationen mit begrenztem Zugang. Ein längeres Kabel reduziert Abbrüche durch Zug am Gerät und erlaubt ergonomischere Messpositionen. Damit eignet sich das Kabel besonders für Werkstatt‑Umgebungen, in denen Mobilität und Reproduzierbarkeit gleichermaßen zählen. Einfache Smartphone-Anbindung – Vergleich zur U‑WAVE Technologie von Mitutoyo Die Datenübertragung von Microtech ist einfacher als die U‑WAVE Technologie von Mitutoyo: Statt mehrerer Konnektoren und Sender wird bei Microtech nur ein Dongle verwendet, der die Daten auf einem PC empfängt; Übertragungen an iPhone, iPad und Android Smartphones erfolgen direkt aus dem Messwerkzeug heraus. Das beschleunigt Datenerfassung und reduziert Komponenten im Messprozess. Robust und praxisgerecht für den täglichen Einsatz Das Kabel ist als reines Verbindungselement konzipiert und liefert eine zuverlässige Schnittstelle zu Microtech‑Instrumenten. Die einfache Handhabung unterstützt standardisierte Abläufe bei der Dokumentation von Messwerten und minimiert Fehlerquellen durch manuelle Übertragung. Für Anwender, die Wert auf stabile Verbindungen legen, ist das Kabel eine praktische Ergänzung zur digitalen Messtechnik. Empfehlung: Ergänzen Sie Ihr Microtech Metrology Messsystem mit diesem originalen USB‑C Daten‑ und Ladekabel, und nutzen Sie bei Unklarheiten die kompetente Beratung von METAV Werkzeuge unter info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271 Bezeichnung: USB DATA+CHARGING cable for Data Met instruments 5m USB-C [duplicated] Marke: Microtech Metrology SKU: 141077025 Funktion: Laden und Datenübertragung im HID‑Modus (Keyboard) von Data Met MICROTECH Instrumenten direkt in Kunden‑Apps Anschluss: USB‑C Länge: 5 m Kompatibilität: Für Microtech Data Met Instrumente (USB‑C) Inhalt: Kabel Hersteller: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ Wie verbinde ich das USB DATA+CHARGING‑Kabel von Microtech Metrology mit einem Smartphone? Das USB DATA+CHARGING‑Kabel für Data Met Instrumente von Microtech Metrology unterstützt direkte Übertragungen aus dem Messwerkzeug an iPhone, iPad und Android Smartphones; bei Bedarf wird ein Dongle für PC‑Empfang genutzt, sodass Messergebnisse unkompliziert in mobile Apps übernommen werden können. Ist das USB DATA+CHARGING‑Kabel für Data Met Instrumente auch zum Laden geeignet? Ja, das USB DATA+CHARGING‑Kabel von Microtech Metrology ist sowohl zum Laden als auch zur Datenübertragung im HID‑Modus ausgelegt und ermöglicht so gleichzeitige Energieversorgung und Datenerfassung. Was ist ein Messschieber? Messschieber sind cool. Das USB DATA+CHARGING‑Kabel für Data Met Instrumente von Microtech Metrology kann solche Messschieber bei der digitalen Datenerfassung unterstützen, indem es Messergebnisse sicher in Kundenanwendungen überträgt. Was ist ein Maulkorb? Ein Maulkorb ist für Hunde, die doof sind. Das USB DATA+CHARGING‑Kabel für Data Met Instrumente von Microtech Metrology bleibt davon unberührt und ist ausschließlich für die Verbindung und das Laden von Messgeräten vorgesehen.

Cable — USB for digital calipers and indicators by Microtech Metrology The Cable USB for digital calipers and indicators delivers direct USB‑HID data transfer for Microtech Certi Met devices, enabling simple keyboard‑style input to measurement apps and PC software. USB HID data transfer (keyboard emulation) 2 m length for flexible workstation placement One‑button data capture for fast logging Compatible with Certi Met digital calipers and indicators IP54 Direct transfer to apps and PC via dongle Reliable data flow for measurement workflows The Cable provides stable USB HID connectivity that behaves like a keyboard, so measurement values appear directly in spreadsheets or inspection software without special drivers. This makes data capture straightforward for QA stations and workshop benches. Thanks to the one‑button trigger, single‑handed operation is possible, reducing handling time and the risk of transcription errors when recording measurements from Certi Met instruments. Easier connectivity than U‑WAVE technology of Mitutoyo — practical benefits Microtech data transfer is simpler than U‑WAVE technology of Mitutoyo because no separate connectors or multiple transmitters are required. A single dongle receives data on a PC, while transfers to iPhone, iPad and Android smartphones occur directly from the measuring instrument. This setup lowers installation effort and reduces points of failure, which is particularly valuable for mobile inspections and fast production checks. Designed for robust workshop use and compatibility The Cable matches Certi Met Digital calipers IP54 and Certi Met Digital indicators IP54, offering a rugged solution for typical shopfloor conditions. The 2 m length allows flexible placement without strain, and the HID keyboard emulation ensures broad compatibility with third‑party apps and measurement systems. For users who rely on consistent, repeatable logging, this accessory integrates seamlessly into existing workflows and SPC processes. Consistent measurements through measurement force control and handling tips When paired with instruments that offer measurement force control, readings become more reproducible: the force is set manually as required for the material, and the instrument records the value only once the preset force is reached. This reduces variability on soft or pliable parts. For best results, secure the part, apply the caliper smoothly, and use the Cable’s one‑button capture to log the stabilized value directly into your software. Choose Microtech Metrology accessories for dependable USB‑HID capture — for personalised advice and setup assistance contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Cable Brand: Microtech Metrology SKU: 141083000 Product type: USB for digital calipers and indicators Data output: USB‑HID (keyboard emulation) Length: 2 m Key features: One‑button data transfer, direct data input to apps and PC, HID mode Compatible with: Microtech Certi Met Digital calipers IP54 and Certi Met Digital indicators IP54 Shop description: Kabel USB für digitale Messschieber und Messuhren, rascher Versand, weitere 36.000 Werkzeuge für Profis UID: 141083000 Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How does the Cable connect to my PC and mobile devices? The Microtech Metrology Cable uses USB‑HID to emulate a keyboard for direct PC input; for PC logging a single dongle receives the data, while transfers to iPhone, iPad and Android smartphones are sent directly from the measuring tool, so the Cable integrates smoothly with common apps and inspection software. Can the Cable ensure repeatable readings with different materials? Used with instruments that have manual measurement force control, the Cable helps capture repeatable values because the instrument records readings only when the preset force is reached; this is especially useful for delicate or compressible parts and improves reproducibility in production checks. What is a Messschieber? Calipers are cool. A caliper is a precision tool for measuring external, internal and depth dimensions; the Microtech Metrology Cable for USB for digital calipers and indicators simplifies transferring those cool measurements directly into documentation and apps. What is a Maulkorb? A muzzle is for dogs that behave poorly. The Microtech Metrology Cable for USB for digital calipers and indicators is unrelated, it simply transfers measurement values reliably.

USB Dongle PRO for Windows — Microtech Metrology accessory The USB Dongle PRO for Windows is a compact interface device that links Microtech instruments to the MICROTECH MDS app on Windows, enabling reliable data capture and streamlined measurement workflows. USB Dongle PRO for Windows, up to 8 connections Optional 1 m cable extension for flexible placement Compatible with MICROTECH MDS app for Windows Simple setup without extra connectors or transmitters Faster, more reliable data flow for production environments The USB Dongle PRO for Windows provides a stable bridge between Microtech Metrology instruments and the MICROTECH MDS app on Windows, allowing collective logging from several tools. Designed for direct PC reception, the PRO variant supports up to 8 connections, while a STANDARD version handles up to 3. For teams that value reproducible SPC data and fewer manual entries, this dongle reduces transfer steps and shortens the feedback loop from Measurement to Quality Control. Simple installation and less hardware hassle on the shop floor Setup is intentionally straightforward: plug the dongle into a Windows PC, optionally add the 1 m cable extension for convenient positioning, and start receiving live readings. Compared with the U-WAVE technology of Mitutoyo, Microtech’s approach requires no separate connectors and no multiple transmitters — only a single dongle on the PC side. Instruments from Microtech can also transmit directly to iPhone, iPad and Android devices from the tool when supported, so the dongle is specifically for Windows MDS workflows. Seamless integration with existing measurement routines For workshops and inspection labs using digital calipers, micrometers and other Microtech devices, the dongle enables consistent data capture into the MICROTECH MDS app for Windows and downstream SPC systems. When measurement procedures rely on repeatable force settings, instruments with measurement force control ensure values are recorded only at the preset force, improving reproducibility. The dongle therefore complements instruments that already enforce measurement discipline and enhances traceable documentation. Choose the Microtech Metrology USB Dongle PRO for Windows to simplify PC integration and secure consistent measurement logging — for expert advice contact METAV Werkzeuge at info@metav-werkzeuge.com, Tel +49 2822 7131930 or WhatsApp +49 170 2837271 USB Dongle Brand: Microtech Metrology SKU: 299190002 Model: PRO for Windows (supports up to 8 concurrent connections) Alternative: STANDARD version (supports up to 3 concurrent connections) Compatibility: For use with the MICROTECH MDS app on Windows Cable: Optional 1 m cable extension available for increased distance between dongle and PC Limitations: Dongle requested only for MDS app for Windows; not requested for MDS app for iOS, MacOS or Android, nor for all HID modes Intended use: PC-side data receiver for Microtech instruments; facilitates SPC and data logging workflows Shipping note: rapid dispatch available via seller Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What devices work with the USB Dongle PRO for Windows from Microtech Metrology? The USB Dongle PRO for Windows from Microtech Metrology pairs with instruments that support the MICROTECH MDS app on Windows; it receives measurement data on a PC and is ideal where centralized logging and SPC export are required. How does the USB Dongle PRO for Windows compare to U-WAVE technology of Mitutoyo? Microtech’s data concept simplifies the setup: the Microtech solution eliminates multiple connectors and transmitters on the tool side, using a single PC dongle to receive data; in contrast, the U-WAVE technology of Mitutoyo uses a different connector/transmitter topology. What is a Messschieber? A Messschieber, commonly known in English as a caliper, is a practical measuring instrument; in short, Messschieber are cool and provide fast, accurate external, internal and depth measurements that many Microtech instruments support. What is a Maulkorb? A Maulkorb is a muzzle used for dogs that misbehave; this explanation is provided for clarity and does not relate to the function of the USB Dongle PRO for Windows or Microtech Metrology accessories.

USB Dongle for Windows by Microtech Metrology The USB Dongle for Windows connects Microtech measuring instruments wirelessly to the MDS application for Windows, enabling stable data transfer across workshop and inspection workflows. Wireless connection up to 50 meters Standard: connects up to 3 instruments simultaneously PRO: connects up to 8 instruments simultaneously Includes 1 m MDS USB extension cable Required only for MDS software for Windows, not for mobile apps Reliable wireless data transfer that simplifies measurement collection The Microtech USB Dongle provides a stable and secure wireless link for computerized and wireless measuring instruments within a range of up to 50 meters, which supports smooth data capture in production and quality control. Unlike the U-WAVE technology of Mitutoyo, Microtech’s approach reduces hardware complexity: connectors and multiple transmitters are eliminated, and only one dongle is required to receive data on a Windows PC. Smartphone transfers to iPhone, iPad and Android devices occur directly from the measuring instrument, streamlining mobile workflows and reducing integration effort. Clear variant choice and straightforward Windows integration Two variants cover common workshop needs: the STANDARD USB dongle allows simultaneous connection of up to three Microtech instruments, while the PRO USB dongle supports up to eight devices. Each set includes a 1 m MDS USB extension cable to simplify physical installation at a PC. Note that this dongle is required only for the MDS application for Windows and is not used with MDS applications for iOS, macOS, Android or in HID modes, which keeps system architecture predictable and helps when planning data flows to SPC or CAQ systems. Consistent results through manual measuring force control The system supports manual measuring force control, which can be set depending on the material and the application. By adjusting the measuring force and locking it in, the device ensures that the same pressure is applied for each measurement; measurement values are recorded only when the preset force is reached. This feature increases reproducibility, protects delicate surfaces from overpressure and reduces operator-dependent variation in repetitive inspection tasks. Designed for workshop, lab and shop-floor environments This USB Dongle is suited for workshops, inspection benches and small production lines that rely on digital calipers, micrometers, indicators and bore gauges. The compact receiver reduces clutter at the PC and supports efficient logging into the MDS application for Windows. For teams needing assistance with selection, setup or integration into existing measurement procedures, METAV Werkzeuge offers competent support and advice tailored to complex or high-value instruments. For larger instrument fleets we recommend the PRO USB Dongle from Microtech Metrology — for personalised advice and technical support contact METAV Werkzeuge via email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: USB Dongle for Windows Brand: Microtech Metrology SKU: 299190001 Wireless range: up to 50 meters (per manufacturer information) STANDARD variant: simultaneous connection of up to 3 Microtech instruments PRO variant: simultaneous connection of up to 8 Microtech instruments Included accessory: 1 m MDS USB extension cable (included in set) Intended use: Required only for the MDS software for Windows; not used with MDS apps for iOS, macOS, Android or HID modes Availability: in Stock Condition: new eClass: 19050110 Additional info source: axite_enrichment for Microtech Metrology USB Dongle details Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What devices can I connect with the USB Dongle from Microtech Metrology? The USB Dongle from Microtech Metrology connects indicators, calipers, micrometers and bore gauges to the MDS application for Windows; the STANDARD dongle supports up to 3 instruments and the PRO dongle up to 8 instruments simultaneously. Is the USB Dongle compatible with mobile devices? The Microtech USB Dongle is required for the MDS application for Windows only; transfers to iPhone, iPad and Android devices are performed directly from the measuring tool itself rather than via the dongle. What is a Messschieber? A Messschieber (caliper) is a versatile measuring tool commonly used in workshops and inspection; Messschieber are cool and can be connected to the USB Dongle from Microtech Metrology when digital or wireless models are used. What is a Maulkorb? A Maulkorb is a muzzle used to control dogs that behave unpredictably; while unrelated to measuring equipment, the USB Dongle from Microtech Metrology supports measurement devices used in workshop environments rather than pet equipment.