Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
300mm Depth Caliper Nail Tip, Color 1.54" Touchscreen, Wireless/USB, IP54 - Microtech Metrology
Combine precise 0.025 mm accuracy with a 1.54" colour touchscreen and reliable Wireless + USB data transfer for efficient, repeatable depth measurement; order directly via Metav Werkzeuge or ask our consultants for application advice. Depth Caliper — Colour touchscreen and Wireless + USB connectivity (Microtech Metrology) The Depth Caliper is a digital depth gauge designed for workshop and inspection tasks, offering a robust measuring range suited to general machine‑shop requirements up to 300 mm. 1.54" colour touchscreen display Wireless and USB data output IP54 splash‑resistant protection Precision 0.025 mm for depth readings Accurate depth measurement for routine quality control The instrument delivers reliable depth readings across a measuring range of 0–300 mm, placing it in the Standard category for calipers — a practical compromise between reach and stiffness for general machining work. With a stated accuracy of ±0.025 mm (25 µm), this digital device is suitable for everyday dimensional checks where repeatability and clear numeric readout speed up inspection routines. The caliper’s measured tolerance offers a predictable basis for process control and reduces the need for repeated manual interpretation of scale marks. Time‑saving connectivity and an intuitive display Equipped with a 1.54" colour touchscreen, the instrument combines an easily legible display with touch operation that simplifies zeroing and unit selection. Measurement values can be exported via Wireless + USB, allowing integration into data collection workflows and reducing transcription errors during quality documentation. Wireless transfer supports quick logging where cable routing is impractical, while the USB interface enables direct connection to PCs or data loggers for batch processing of measurement series. Built to withstand workshop conditions and everyday handling With an IP54 rating the depth gauge resists dust ingress and splashing, making it robust enough for production environments without requiring special housing. The device’s mechanical design focuses on stable depth probing and consistent contact geometry, which helps preserve measurement integrity over repeated use. For teams that rely on fast, dependable checks during assembly or setup, the combination of a compact digital interface and protective sealing enhances uptime and lowers the risk of damage-related downtime. Contact Metav Werkzeuge for tailored guidance on Microtech Metrology depth calipers and to arrange prompt supply from our Emmerich facility. Technical data Article number: 1432030307 GTIN: 4061905452642 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: ±0.025 mm (25 µm) Display: Colour 1.54" touchscreen Special features Wireless + USB data output IP54 splash‑resistant protection Digital depth gauge format Classified as Standard (measuring range up to 300 mm) FAQ What measuring range does this instrument cover? The Microtech Metrology depth caliper covers a measuring range of 0–300 mm and is classified in the Standard range for calipers, making it suitable for most machine‑shop and inspection tasks. How precise are the depth readings? Depth readings are specified with an accuracy of ±0.025 mm (25 µm), providing repeatable measurements for routine quality control work with the Microtech Metrology depth caliper (SKU 1432030307). How can measurement data be exported? Measurement values can be transferred using the caliper’s Wireless capability or via USB, enabling integration into digital reporting systems and reducing manual data entry. Is the device suitable for workshop use? Yes; the instrument is rated IP54, which protects against dust ingress and splashes, making it well suited to the conditions found in industrial workshops and production areas. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Caliper Swiss Digit Display IP67, 0.01mm Resolution, Calibrated Certificate - Microtech Metrology
Take advantage of the combination of robust environmental protection, clear Swiss Digit readability and workshop-grade measurement accuracy for reliable depth checks across production and inspection tasks. Order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Digital Depth Caliper — Microtech Metrology; IP67, 0–300 mm The Digital Depth Caliper is a precision depth-measuring instrument for workshop and quality‑control applications, designed to deliver repeatable measurements on machine parts and assemblies. IP67 protection for harsh environments Swiss Digit 11 mm high-contrast display 0–300 mm range with 0.01 mm readout Precise depth readings that support production decisions The caliper offers a 0–300 mm measuring span with a reading resolution of 0.01 mm and an accuracy of ±0.03 mm, enabling confident decisions during incoming inspection and in-process checks. The fine resolution reduces interpretation errors compared with coarser instruments, while the documented accuracy helps classify tolerances and reduce scrap rates. This makes the tool particularly suitable for routine dimensional control where small deviations affect assembly fit or function. Robust construction for demanding workshop environments With IP67 protection, the instrument resists dust ingress and brief immersion, so measurement capability is maintained at the machine bench even where coolant mist or metal swarf is present. The Swiss Digit display, with an 11 mm character height, ensures readings remain legible under varied lighting and angles, cutting measurement time and reducing transcription mistakes. The sealed electronics and rugged slider design translate into fewer service interruptions and longer periods between maintenance. Streamlined inspection workflow and practical benefits Classified within the Standard range (100–300 mm) of calipers, the instrument balances reach and stiffness for typical machine‑shop work. The clear digital readout speeds checks compared with non-digital alternatives and simplifies documentation of results. For shops introducing digital measurement into routine quality control, the instrument provides an immediate uplift in process reliability without the complexity of larger metrology systems. For dependable depth measurement in production and inspection, choose the Microtech Metrology digital depth caliper and contact Metav Werkzeuge in Emmerich for tailored advice, delivery details or to discuss suitability for specific applications. Technical data SKU: 1432030303 GTIN: 4061905459801 Manufacturer: Microtech Metrology Category: Digital depth caliper Display: Swiss Digit, 11 mm character height Protection class: IP 67 Facts Measuring range: 0–300 mm Resolution (reading): 0.01 mm Accuracy: ±0.03 mm Digital: yes Special features Standard range classification: Standard (100–300 mm) Robust slider and sealed electronics Suitable for workshop and quality‑control use FAQ What measurement range does the caliper cover? The Microtech Metrology digital depth caliper covers a measuring range of 0–300 mm (SKU 1432030303), suitable for most general workshop and machine‑shop depth checks. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, making it suitable for standard dimensional control tasks in production and inspection. Is the device resistant to coolant and dust? Yes. The caliper is rated IP67, offering dust-tight construction and protection against temporary immersion, so it performs reliably at the machine bench. How readable is the display under workshop lighting? The caliper is fitted with a Swiss Digit display featuring 11 mm-high characters for high‑contrast legibility, reducing read errors and speeding measurements. Is this caliper suitable for routine quality control in a small shop? Absolutely. The balance of 0–300 mm reach, fine 0.01 mm resolution and robust protection suits small to medium workshops seeking reliable, fast depth measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper Double Hook, 0.001mm Resolution, IP54, USB Output - Microtech Metrology
Combining USB data output, IP54 protection and ±0.03 mm repeatability, this digital depth instrument delivers reproducible depth measurement across the standard 0–300 mm workshop range. Order the digital depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Depth Caliper — Microtech Metrology, USB, 0–300 mm The Digital Depth Caliper is a precision depth gauge for inspection and workshop measurement, designed for standard 0–300 mm tasks with a clear digital readout. USB data output for traceable logging IP54 protection for workshop environments 0–300 mm range for standard workshop tasks ±0.03 mm accuracy for reliable control Precise, repeatable depth measurement that fits the workshop The depth gauge is configured for standard workshop applications with a 0–300 mm measuring range, placing it squarely in the universal workshop class where reach and stiffness are balanced for everyday use. With a display resolution of 0.001 mm and an indicated accuracy of ±0.03 mm, the instrument supports reliable decision-making in quality control and routine inspections. The high-resolution readout reduces interpolation errors common to analog instruments and ensures that recorded values remain comparable across shifts and operators. Traceable data capture to speed up quality routines Equipped with USB output, the caliper removes manual transcription and simplifies data logging for inspection protocols. The 13 mm display offers high legibility to speed readings and reduce operator error during repetitive tasks. Exported files can be integrated into common quality-management software or spreadsheets, supporting statistical process control and audit documentation. This capability enhances throughput by shortening inspection cycles and by providing a direct data path from measurement to documentation. Built for workshop conditions with clear handling benefits The instrument’s IP54 rating gives reliable protection against dust ingress and splashing liquids, making it suitable for production-floor environments. The digital readout and compact depth beam allow straightforward positioning in confined spaces where visual access is limited. The overall design prioritises fast, repeatable operation so that the focus remains on measurement quality rather than instrument handling. For buyers seeking dependable, documented depth measurement, this digital device from Microtech Metrology combines workshop toughness with the data features needed for modern quality workflows. Choose Microtech Metrology’s digital depth caliper for reliable, logged depth measurement — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for specialist purchasing advice and rapid supply. Technical Data Article number: 1432020302 GTIN: 4061905456275 Brand: Microtech Metrology Digital: yes Data output: USB Protection class: IP 54 Display height: 13 mm Facts Measuring range: 0–300 mm Resolution: 0.001 mm Accuracy: ±0.03 mm Display height: 13 mm Special features Digital depth caliper design USB data output for traceable logs IP54 splash and dust resistance FAQ How accurate is the depth measurement? The digital depth caliper achieves an indicated accuracy of ±0.03 mm with a resolution of 0.001 mm, making it suitable for routine inspection and workshop control. Which measurement tasks is this instrument intended for? This depth gauge is designed primarily for depth and step measurements within the standard workshop range of 0–300 mm. Can measurement values be exported for documentation? Yes, measurements can be exported via the USB data output for integration into inspection records and quality-management systems. Is the instrument suitable for use on the shop floor? With an IP54 protection rating, the caliper is resistant to dust and splashes and is therefore suited to industrial workshop environments. What is the product reference for ordering or spare parts? The product is listed under article number 1432020302 and is supplied by Microtech Metrology. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper Double Hook, Swiss Digit Display 11mm, IP67 - Microtech Metrology
Take advantage of robust IP67 protection, a high-contrast Swiss Digit display and a fine 0.001 mm reading to secure reproducible depth measurements across the workshop; order the depth caliper directly via Metav Werkzeuge or contact our consultants for application-specific advice. Depth Caliper — Digital depth caliper with Swiss Digit display and IP67 protection (Microtech Metrology) Depth Caliper for fast, reliable depth measurement in machine shops and inspection bays with a clear Swiss Digit display and durable enclosure Swiss Digit 11 mm display IP67 dust and water protection Precise 0–300 mm measuring range Resolution 0.001 mm reading High-resolution measurement for demanding shop-floor tasks The instrument delivers a 0.001 mm reading, making it suitable where fine depth distinctions matter. With a measuring span of 0–300 mm, the tool fits the standard caliper class used across general engineering and metalworking. The combination of a fine digital readout and a robust construction reduces repeat-measurement scatter, supporting faster decision-making on the production line. The clear Swiss Digit display (11 mm high digits) speeds reading and reduces transcription errors during inspection rounds, while the stable digital electronics allow quick capture of values for process control. Durable design that withstands industrial environments Engineered for frequent use, the caliper is rated IP67, which protects internal electronics against dust ingress and short-term immersion. This level of protection extends service intervals and minimises downtime caused by contaminants or coolant mist common in machining cells. The sealed digital unit and rugged slider ensure consistent performance in mixed environments, from bench inspection to on‑machine checks, and support long-term reliability under routine shop stresses. Practical handling and integration for everyday use Ergonomic balance and a concise display layout allow rapid depth measurements on workpieces, gauges and toolsetups. As a dedicated depth instrument, it simplifies tasks that otherwise require improvised fixtures or repeated manual checks. The device suits maintenance, quality control and in-process verification tasks where traceable, repeatable depth data are required. For procurement and inventory planning, listing the product as a digital depth caliper ensures compatibility with workshop tooling lists and inspection procedures. For tailored advice and reliable supply of this Microtech Metrology depth caliper (SKU 1432020303), contact Metav Werkzeuge in Emmerich for local stock information and technical guidance. Technical data Article number: 1432020303 GTIN: 4061905456299 Manufacturer: Microtech Metrology Category: Digital caliper IP protection: IP67 Display: Swiss Digit, 11 mm Digital: yes Facts Measuring range: 0–300 mm Resolution / reading: 0.001 mm Display height: 11 mm eClass: 21170344 Special features Swiss Digit display IP67 dust and water protection Digital depth caliper for workshop use Standard range classification: Standard (max 100–300 mm) FAQ What measuring range does the depth caliper cover? The Microtech Metrology depth caliper covers a 0–300 mm measuring range (SKU 1432020303), matching standard workshop requirements for components and fixtures. What is the smallest increment readable on the display? The instrument provides a 0.001 mm reading resolution via the Swiss Digit display, enabling fine depth discrimination for inspection tasks. Is the caliper suitable for damp or dusty environments? Yes — the caliper is rated IP67, which protects against dust ingress and temporary immersion, making it suitable for many shop-floor conditions. Which display does the device use and how readable is it? The unit features a Swiss Digit display with 11 mm high digits for improved legibility during fast inspection cycles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Digital Caliper With Double Hook, Swiss Digit Display 11mm, IP67 Wireless - Microtech Metrology
Combine high-resolution measurement (0.001 mm) with wireless data transfer and IP67 protection to keep inspection workflows efficient and reliable. Order the depth caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Depth Caliper — Digital, Wireless Output, IP67 (Microtech Metrology) The Depth Caliper is a digital depth-measuring instrument for workshop and inspection use, offering a 0–300 mm measuring range and robust wireless data output. Digital display Swiss Digit 11 mm Wireless data transfer for traceability IP67 protection for wet environments Range 0–300 mm for standard workshop tasks Faster inspections with laboratory-grade resolution This depth-measuring instrument combines a 0–300 mm measuring range with a fine 0.001 mm resolution to accelerate routine checks while keeping measurement uncertainty low. The exceptionally small display increment makes subtle deviations visible at a glance, reducing rework and inspection time. With wireless data output, measured values are transferred without manual transcription, which reduces human error and speeds up documentation for production control or quality records. Built to withstand workshop conditions Designed for standard workshop applications, the caliper sits in the Standard class (measuring range up to 300 mm), which balances reach and rigidity for everyday machine‑shop tasks. The IP67 rating means the sliding sections and electronics are protected against dust ingress and short immersion in water, so the instrument tolerates coolant splashes and cleaning routines. This durability preserves measurement stability and lowers the frequency of unplanned replacements in harsh environments. Clear readout and straightforward data handling The unit features a Swiss Digit display with an 11 mm digit height for rapid legibility in dimly lit benches and on busy production floors. Combined with the wireless interface, the caliper supports digital workflows by enabling direct transfer to inspection software or data loggers, cutting administrative steps between measurement and evaluation. The intuitive digital readout simplifies training for operators while maintaining traceable measurement chains. Practical confidence from a reputable maker and supplier Manufactured by Microtech Metrology, the instrument matches industry expectations for repeatability and component quality, making it suitable for assembly shops, toolrooms and quality departments. Supplied through Metav’s European distribution, customers benefit from a reliable stock and a clear procurement channel that supports consistent quality across workshops and smaller industrial operations. Contact Metav Werkzeuge today for technical advice and secure this Microtech depth caliper with wireless output and IP67 protection for your inspection setup Technical Data Article number: 1432020304 GTIN: 4061905456312 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.001 mm Display height: 11 mm Protection class: IP 67 Special features Digital display: Swiss Digit Data output: Wireless Category: Digital depth caliper Application: Depth measurement for workshop and inspection FAQ What measuring range does the depth caliper cover? The depth caliper has a measuring range of 0–300 mm, making it a Standard‑class caliper suitable for general workshop and machine‑shop tasks. What resolution and accuracy can be expected from this digital caliper? The instrument provides a resolution of 0.001 mm, allowing for fine detection of dimensional deviations during inspection routines. How is measurement data transferred from the caliper? Measurement values are transmitted via the device’s wireless data output for direct integration into inspection software or data collection systems. Is the caliper suitable for use in damp or coolant-prone environments? Yes, the caliper is rated IP67, which protects against dust ingress and temporary immersion, making it robust for shop‑floor conditions. Who manufactures the caliper and where does it ship from? The caliper is manufactured by Microtech Metrology and is supplied via Metav Werkzeuge to ensure consistent availability and distribution across Europe. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge Caliper Digital Color Touchscreen Wireless USB IP54 - Microtech Metrology
Take advantage of the combination of precise measurement capability, flexible data transfer and robust protection for reliable workshop results; order the instrument directly via Metav Werkzeuge or ask the Metav consultants for additional technical advice. Depth Caliper — Digital depth caliper, 0–300 mm, 1.54" colour touchscreen (Microtech Metrology) Depth Caliper — a digital depth-measuring caliper designed for standard workshop and quality-control applications, offering reliable data transfer and robust IP54 protection for intermittent dusty or damp environments. Digital depth caliper, 0–300 mm range 1.54" colour touchscreen display Wireless and USB data output IP54 protection for workshop use Precision and dependable measurement for routine inspection The Depth Caliper combines a clear 1.54" colour touchscreen with a finely tuned measurement system to deliver repeatable depth readings across the 0–300 mm span. With a stated accuracy of 0.025 mm and a reading increment of 0.005 mm, the instrument suits standard machine‑shop tolerances and component inspection tasks. The digital display simplifies reading and reduces interpretation errors compared with analogue scales, while the device’s digital interface supports efficient downstream documentation. Efficient data capture and process integration Equipped with Wireless + USB data output, the caliper supports fast transfer of measured values into inspection protocols and spreadsheets, reducing manual entry and associated errors. The combination of onboard display and external data channels enables both standalone checks and integration into digital quality workflows; this makes the instrument suitable for workshop benches and small-series production lines where traceable data capture speeds up throughput and auditability. Durable design for everyday workshop conditions Built to IP54 standards, the measuring device resists dust ingress and water splashes commonly encountered on the shop floor, extending service life and ensuring consistent operation. The construction balances handling convenience with the rigidity required for depth measurement in the standard range (0–300 mm), offering a dependable tool for general metalworking, assembly jigs and fixture checks. The manufacturer’s reputation further supports sustained use in industrial settings. For tailored advice on integrating this Microtech Metrology depth caliper into existing inspection routines, contact Metav Werkzeuge—local expertise and workshop-proven parts supply from Emmerich are available to assist with specifications and procurement. Technical Data Article number: 1432020307 GTIN: 4061905456329 Manufacturer: Microtech Metrology Facts Measurement range: 0–300 mm Reading increment: 0.005 mm Accuracy: 0.025 mm Display: Colour 1.54" touchscreen Data output: Wireless + USB Protection class: IP54 Digital instrument: yes Special features Standard workshop class caliper (0–300 mm) Colour touchscreen interface Wireless data transmission option USB data connection FAQ What measurement range does the caliper cover? The caliper offers a measurement range of 0–300 mm, classifying it in the standard workshop category suitable for routine machine‑shop and assembly measurements. What accuracy and resolution can be expected from this instrument? The instrument provides an accuracy of 0.025 mm with a reading increment of 0.005 mm, which meets typical quality‑control needs for standard components. How can measurement values be exported? Measurement values can be transferred via Wireless connection or USB, allowing quick documentation and integration into inspection records. Is the instrument protected against dust and coolant splashes? Yes; the caliper is rated IP54, offering resistance to dust ingress and water splashes common in workshop environments. Who manufactures this caliper and where can further product details be obtained? The caliper is produced by Microtech Metrology; further technical details can be provided by Metav Werkzeuge for application advice and procurement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Depth Gauge Caliper Digital Wireless Swiss Digit Display IP67 - Microtech Metrology
A robust, workshop-ready solution that pairs IP67 protection with wireless data transfer and a clear Swiss Digit display for dependable depth measurement; benefit from reliable readings and seamless digital capture. Order the depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Depth caliper — wireless digital instrument, IP67 protection (Microtech Metrology) The Depth caliper is a wireless digital measuring instrument for reliable depth measurements in machine shops and production environments up to 300 mm. Wireless data output for traceable measurements IP67 protection against dust and water ingress Swiss Digit display 11 mm for clear readings Accuracy ±0.03 mm, resolution 0.01 mm Precise measurements that reduce rework and downtime The instrument delivers a measuring range of 0–300 mm, placing it in the Standard class for workshop and machine‑shop use where reach and stiffness must be balanced. With a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, the device supports routine quality checks and dimensional control across common production tasks. The Swiss Digit display (11 mm digit height) improves read‑off speed and reduces interpretation errors; this combination of resolution, accuracy and legibility helps to avoid rework and maintain throughput in repetitive measurement cycles. Built to withstand shop conditions while simplifying data capture Designed for industrial conditions, the instrument carries an IP67 rating, which protects against dust ingress and temporary immersion in water — a practical advantage on busy shop floors. The Wireless data output enables direct capture of measurement values into data logging or SPC systems, reducing manual transcription and the associated risk of errors. These features support faster inspection routines and seamless integration into digital quality processes, contributing to consistent documentation and traceability of measurement results. Integration into daily workflows and the Metav advantage As a compact digital depth gauge, the tool is well suited to repetitive depth checks and fixture verifications in toolrooms and assembly. Its Standard measuring range offers the best compromise between reach and rigidity for general metalworking tasks, while the robust housing and clear display focus on uptime and operator efficiency. Supplied by Microtech Metrology through Metav Werkzeuge, the instrument benefits from Metav’s European supply and quality‑filtering approach: dependable availability, broad product ranges and specialist support tailored to industry requirements. For supply and integration advice from Metav Werkzeuge — ask about system compatibility and delivery from our Emmerich location Technical data Article number: 1432030304 GTIN: 4061905459887 Brand: Microtech Metrology Type: Digital depth caliper Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Protection rating: IP67 Special features Wireless data output Swiss Digit digital display Digital instrument Category: Standard (100–300 mm) class Measuring function: Depth measurement FAQ What measuring range does the caliper cover? The depth caliper covers a range of 0–300 mm, categorising it as a Standard class instrument suitable for common workshop and machine‑shop tasks. What resolution and accuracy are specified? Resolution is 0.01 mm and accuracy is ±0.03 mm, with a Swiss Digit display (11 mm) for clear read‑off on the Microtech Metrology depth caliper (SKU 1432030304). Is the instrument suitable for use on the shop floor? Yes — the IP67 rating provides protection against dust and temporary immersion, making the instrument appropriate for industrial workshop environments. How are measurement values transferred? Values are sent via the wireless data output, enabling direct capture into data logging, SPC or inspection software for traceable records. What measurement function does this tool perform? The instrument is designed specifically for depth measurement as a digital depth caliper, focusing on precise and repeatable depth checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Dial Caliper 0.01mm Resolution Four-Point Measurement Plastic Case DIN 862 - Metav IndustryLine
Take advantage of the combination of precise 0.01 mm reading, a clear 45 mm dial and four measurement modes for consistent workshop quality control; ordering is possible directly via Metav Werkzeuge or by consulting the technical advisors for specification alignment. Dial Caliper "TOP" M202.136 — 300 mm range, 0.01 mm dial reading (analog) The Dial Caliper "TOP" is an analogue measuring instrument designed for workshop and precision‑engineering use, offering clear mechanical readout and robust features for general machine and metalworking inspection. Analog dial, 0.01 mm resolution 45 mm easy‑read dial Four measuring functions (in/out/depth/step) Locking screw, thread pitch table on reverse Precision and compliance for everyday workshop control The dial instrument delivers a 0.01 mm reading resolution combined with mechanical robustness that suits routine quality checks and setup tasks. Compliance with DIN 862 ensures the measuring chain follows recognised workshop standards, which simplifies traceability and documentation in production environments. The 45 mm dial provides an enlarged, easy‑to‑read display that reduces interpretation errors during repeated inspections; the analogue principle avoids battery dependency while offering immediate, tactile feedback. Together these characteristics make the tool appropriate for assembly benches, maintenance departments and light quality‑control stations where reproducible results matter. Designed for reliable handling and repeatable results With a measuring range classed as Standard (100–300 mm), the instrument balances reach and stiffness to measure common components such as shafts, housings and mounting fixtures with stable guidance. The inclusion of a locking screw secures the slider for transfer measurements or template marking, while a thread pitch table on the reverse speeds up fast checks on threaded parts without the need for separate references. Mechanical construction and slide guidance prioritise repeatability, so each measurement cycle returns comparable values — a key factor when the measuring routine is repeatedly performed on production lines or in quality audits. Practical features that speed up inspection tasks The caliper supports four measuring functions — external, internal, depth and step — enabling multiple routine tasks with one instrument and reducing tool changes during inspection sequences. The clear analogue dial readout helps technicians maintain focus on the component rather than on menus or electronics, increasing throughput in simple inspection workflows. Lightweight and compact handling characteristics favour single‑hand operation at the bench; combined with the instrument’s straightforward design, this reduces training time for new operators and simplifies incorporation into existing measuring sets for workshops and service departments. Contact Metav Werkzeuge for advice on specifying the Dial Caliper "TOP" (M202.136) and arrange delivery from our Emmerich quality centre Technical data Article number: M202.136 GTIN: 4054469102344 Brand: Metav IndustryLine Norm: DIN 862 Core technical data Measuring range: 0–300 mm Resolution: 0.01 mm Dial diameter: 45 mm Measuring functions: 4 (external/internal/depth/step) Special features Analog dial readout Locking screw for secure measurements Thread pitch table on reverse face Classification: Standard (100–300 mm) Mechanical construction, no battery required FAQ Is the Dial Caliper "TOP" suitable for workshop quality control? The Dial Caliper "TOP" (M202.136) is intended for workshop and light quality‑control tasks thanks to its 0–300 mm range and 0.01 mm readout. Which measurement types can be performed with this caliper? The instrument supports external, internal, depth and step measurements, enabling four distinct inspection tasks without tool changes. Does the caliper comply with recognised standards? Yes, the device is manufactured to meet DIN 862, which defines general requirements for calipers used in industrial environments. Is an electronic data interface available for the instrument? This is an analogue dial instrument; no electronic data output is provided for the Dial Caliper "TOP". What practical aids are included for thread checking? A thread pitch table is printed on the reverse face to facilitate quick identification and basic verification of thread pitches during inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.01mm Resolution, Four-Function, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of a workshop‑grade dial caliper that combines fine resolution and practical handling: the large 45 mm dial and 0.01 mm graduation ensure precise readings, while the four measurement functions support a wide range of tasks; order or discuss the caliper with Metav Werkzeuge for a reliable delivery and application advice. Dial Caliper M202.036 — 0–300 mm, 0.01 mm dial, Metav IndustryLine A robust dial caliper M202.036 designed for general workshop and quality‑control use with a clear mechanical dial and DIN 862 conformity. Dial reading with 0.01 mm resolution Measuring range 0–300 mm standard workshop size Four functions: inside, outside, depth, step Reverse‑side thread pitch chart included Precision that speeds up workshop inspection The mechanical dial and finely graduated scale deliver repeatable measurements across the standard 0–300 mm range, classified as the standard category for general machinery and metalwork. With a 45 mm dial, readings are quick to interpret and the 0.01 mm graduation gives a level of detail that goes beyond coarse vernier tools, supporting tighter tolerances without complex electronics. This precision translates into fewer reworks and faster QA cycles, a clear rational advantage for production and maintenance environments where measured parts must fall consistently within specification. Four measurement modes for versatile tasks Equipped to perform outside, inside, depth and step measurements, the tool replaces multiple single‑purpose gauges and streamlines the inspection process. The long and short jaw geometry (60/25 mm) accommodates a variety of component sizes while keeping handling nimble at the bench. The built‑in thread pitch chart on the reverse side speeds up everyday checks on threaded components, reducing time spent consulting separate references and thereby improving workflow efficiency. Simple mechanics, dependable handling As an analog instrument constructed to DIN 862, the caliper emphasises mechanical robustness and intuitive operation. The dial drive avoids battery dependence and the tactile feel supports consistent application of measuring pressure, improving measurement constancy in routine use. For teams preferring straightforward tools that are easy to teach and maintain, this caliper offers an approachable balance of durability and measuring fidelity that supports both skilled machinists and workshop trainees. Practical delivery and traceable details The caliper comes supplied in a protective transport case and includes practical workshop aids such as the reverse‑side thread table; this ensures safe storage in transit and convenient reference on the shop floor. Conformity with DIN 862 is stated on the instrument, aligning it with common inspection standards. The compact mechanical design minimises downtime related to battery changes, while the dial diameter and jaw geometry make the instrument comfortable to read and manoeuvre during repetitive inspection tasks. Contact Metav Werkzeuge to discuss how the Metav IndustryLine dial caliper M202.036 fits your quality routine and to arrange supply directly from our Emmerich facility Technical data Article number: M202.036 GTIN: 4054469102252 Brand: Metav IndustryLine Category: Caliper / Dial caliper Conformity: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Dial diameter: 45 mm Jaw lengths: 60 mm / 25 mm Customs tariff number: 90173000 Special features Dial (mechanical) reading mechanism Four measurement functions: outside, inside, depth, step Thread pitch chart on reverse side Supplied in protective case for transport Analog instrument, no battery required FAQ What measuring range does this caliper cover? The Metav IndustryLine dial caliper M202.036 covers a measuring range of 0–300 mm, making it a standard‑range workshop instrument suitable for everyday machining and inspection tasks. How fine are the readings on the dial? Readings on this dial caliper are to 0.01 mm resolution; the 45 mm dial offers clear visibility for precise interpretation during routine measurements. Which measurement types can be performed with this caliper? The instrument supports four measurement types: outside, inside, depth and step measurements, so it replaces several single‑purpose gauges in common shop workflows. Is a case provided and what is it for? Yes, the caliper is supplied in a protective transport case to safeguard the instrument during transit and short‑term storage in the workshop. Does the caliper conform to inspection standards? The caliper is made to DIN 862, indicating compatibility with established mechanical caliper standards for workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.02mm Resolution Four-Function, Plastic Case, DIN 862 - Metav IndustryLine
Take advantage of a precise 0.02 mm graduation, a clear 45 mm dial and full four‑function measuring capability to streamline routine inspection tasks; order the caliper directly via Metav Werkzeuge or consult our advisors for application support. M202.032 Dial Caliper — 300 mm range, 0.02 mm resolution (Metav IndustryLine) The M202.032 dial caliper is a robust analogue measuring instrument designed for general workshop and precision mechanical use, offering a 300 mm measuring range and fine 0.02 mm graduation for repeatable dimension checks Precision 0.02 mm graduation 45 mm diameter dial for clear readings Four-function measuring capability Conforms to DIN 862 standard Precision where it matters for workshop quality control The instrument delivers a 0.02 mm graduation across a 300 mm span, which places it firmly in the standard caliper category for machine and metalworking shops. The fine scale enables reliable checks of small features while the long range covers the most common workshop tasks, so inspection routines become more efficient. Because the design follows DIN 862, the measuring results are compatible with common quality-control expectations and easily comparable across suppliers and inspection reports. Clear readings and versatile measurement modes A prominent 45 mm dial provides rapid visual confirmation of measurements, complementing the vernier layout for analogue precision. The device supports four‑function measuring: external, internal, depth and step measurements, reducing the need for multiple tools during a single inspection. The combination of dial readability and multi‑mode capability shortens measuring cycles and lowers the risk of handling errors during repeated checks. Built for everyday use and safe transport The caliper is produced as an analogue instrument with practical features such as a thread table on the reverse face for quick reference. It is supplied with a protective case for secure transport and storage, protecting the scale and dial from shocks and contamination between jobs. The balanced design keeps handling straightforward during single‑handed measuring tasks while maintaining the stiffness needed for repeatable results on typical workshop components. For traceable, workshop-grade measurement equipment, request a quote for the Metav IndustryLine M202.032 dial caliper from Metav Werkzeuge in Emmerich or contact our experts for application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M202.032 GTIN: 4054469102207 Category: Calipers (analogue dial caliper) Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution / graduation: 0.02 mm Dial diameter: 45 mm Reading (dial): 0.2 Special features Analogue (dial + vernier) Conforms to DIN 862 Four‑function measuring: external, internal, depth, step Thread table printed on reverse side for reference Supplied with protective transport case FAQ What measuring tasks is this caliper best suited for? The M202.032 dial caliper is intended for general workshop use and precision mechanical checks where a 300 mm range and 0.02 mm graduation cover typical component dimensions. Does the instrument support internal and depth measurements? Yes — the caliper provides four‑function measuring (external, internal, depth and step), enabling versatile inspection without changing tools. Is the reading standard traceable to industry norms? The caliper is manufactured to meet DIN 862, making its readings suitable for standard workshop quality control and comparable across suppliers. How is the caliper protected during transport and storage? The M202.032 is supplied in a protective case to safeguard the scale and dial against impact and contamination between jobs. Can the dial be read quickly under workshop lighting? The 45 mm diameter dial offers a clear, easy‑to‑read display that speeds up repetitive measurements and reduces operator fatigue. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.02mm Resolution, Four-Function, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of clear analogue reading, robust mechanical design and DIN 862 compliance to secure reliable workshop measurements; order the dial caliper directly via Metav Werkzeuge or consult our specialists for application advice. Dial Caliper "TOP" 300 x 0.02 mm by Metav IndustryLine — analogue dial, 45 mm display Dial Caliper "TOP" 300 x 0.02 mm is an analogue dial caliper for general workshop and metalworking use, offering precise mechanical measurements up to 300 mm with a clear 45 mm dial display. 45 mm dial for fast reading 0.02 mm resolution for precise checks Four‑function measurement capability Locking screw for repeatable readings Consistent precision that supports quality control The analogue dial with a 45 mm face provides immediately legible readings, making routine checks both faster and less error‑prone. With a reading step of 0.02 mm, this caliper offers the highest grade of mechanical resolution commonly used in precision workshop tasks, which is especially valuable where sub‑millimetre reproducibility is required. Compliance with DIN 862 underlines suitability for standardised inspection routines, so measurement results can be relied upon for process control and incoming inspection. Designed for versatile measurement tasks This instrument combines four measurement modes — inside, outside, depth and step — in a compact form that suits everyday metalworking and maintenance work. The dual jaw lengths (60/25 mm) extend versatility for measuring narrow bores and stepped components without changing tools. A robust locking screw secures the slide for transfer measurements, improving repeatability when recording values or passing components between workstations. Practical features for workshop efficiency Built as a straightforward mechanical instrument, the caliper requires no batteries and delivers dependable readings in environments where electronics may be inconvenient. The rear‑side thread table supports quick reference during machining operations, reducing lookup time at the bench. The simple, tactile operation of an analogue dial instrument fosters rapid training for staff and predictable outcomes during repetitive measurement tasks. Contact Metav Werkzeuge for specific application advice on the Metav IndustryLine dial caliper "TOP" (SKU M202.132) and to arrange stock availability or a technical consultation tailored to workshop requirements. Technical data Article number: M202.132 GTIN: 4054469102306 EClass: 21170344 Category: Calipers (measuring instruments) Dimensions & accuracy Measuring range: 0–300 mm Resolution: 0.02 mm Dial diameter: 45 mm Jaw length: 60/25 mm Standard: DIN 862 Features & functions Analogue dial caliper Four‑way measurement: inside, outside, depth, step Locking screw (feststellschraube) Thread reference table on reverse (gewindetabelle auf der rückseite) FAQ What measurement tasks is this caliper suitable for? The dial caliper "TOP" is suitable for routine workshop measurements in metalworking and maintenance, covering outside, inside, depth and step measurements up to 300 mm. What accuracy and resolution can be expected? This analogue instrument delivers a resolution of 0.02 mm and is designed to meet the precision range typical for high‑quality mechanical calipers. Does the instrument meet industry standards? Yes, the caliper is specified to DIN 862, ensuring compatibility with standard inspection procedures. Are there practical features that speed up shopfloor work? The large 45 mm dial, locking screw and the thread table on the reverse of the slide are intended to reduce handling time and speed up repetitive measurement tasks with the caliper "TOP". Which identifier should be used when ordering or enquiring? Refer to SKU M202.132 and GTIN 4054469102306 when specifying the Metav IndustryLine dial caliper in purchase orders or technical enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Bore Distance Caliper With 10mm Cone Tips, 0.01mm Display, Supplied In Case - Metav IndustryLine
Take advantage of a robust combination of hardened stainless steel construction, a measuring range of 10–300 mm and a clear digital display with PRESET and ON/OFF for reliable bore‑centre measurement in the workshop. Order the Digital Bore Distance Caliper 300 x 100 mm, cone D = 10 mm directly via Metav Werkzeuge or ask our consultants for tailored advice. Digital Bore Distance Caliper 300 x 100 mm, cone D = 10 mm — Metav IndustryLine Digital Bore Distance Caliper 300 x 100 mm, cone D = 10 mm is a precision instrument for measuring centre‑to‑centre distances of bores and related dimensions in metalworking and toolroom environments. Hardened stainless steel construction Measuring range 10–300 mm Digital display with PRESET and ON/OFF 0.01 mm display resolution Consistent accuracy where workshop measurement counts The instrument is built in hardened stainless steel, which provides lasting rigidity and corrosion resistance for everyday use in machine shops. With a measuring range of 10–300 mm, the tool falls into the Standard caliper class, offering the best compromise between reach and stiffness for typical engineering tasks. The 0.01 mm display resolution supports routine quality checks and machining set‑ups where clear, repeatable values are required. Purpose‑designed probe geometry for bore distances A 10 mm cone diameter and a 100 mm probe length enable precise contact in bores and recesses while keeping insertion clearances manageable. The tapered cone allows reliable seating in cylindrical features to determine centre distances between adjacent holes or from reference edges. The instrument’s construction and probe geometry reduce probing error and make the measurement process quicker compared with fiddly improvised fixtures. Digital convenience that speeds inspection workflows The electronic display includes ON/OFF and PRESET functions for fast zeroing and repeated comparative measurements; this reduces setup time during batch inspections. The integrated data output (RB 5) supports connection to measuring data systems or logging devices for traceable documentation of results. The robust build and clear readout simplify day‑to‑day checking, enhancing throughput without compromising measurement reliability. For reliable bore‑centre measurement with Metav IndustryLine precision, contact Metav Werkzeuge in Emmerich for purchase advice and technical clarification at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: M240.293 GTIN: 4054469178738 Manufacturer: Metav IndustryLine eClass: 21170344 Customs tariff number: 90173000 Facts Measuring range: 10–300 mm Resolution: 0.01 mm Probe / cone diameter: 10 mm Probe length: 100 mm Weight: 1 kg Special features Material: stainless steel, fully hardened Display: digital with ON/OFF and PRESET buttons Data output: RB 5 Norm: Werksnorm Category: caliper (bore distance measurement) FAQ How accurate is this caliper for routine workshop checks? The caliper offers a 0.01 mm display resolution and is designed for standard workshop accuracy across its 10–300 mm range; it is suitable for machine‑shop quality control where repeatable results are required. Can this tool measure bore centre distances and depths? Yes, the tapered cone and probe geometry permit accurate determination of bore‑to‑bore centre distances and related depth measurements when used as a bore distance caliper. Is the instrument suitable for use on stainless steel and other metals? The caliper’s hardened stainless steel construction ensures compatibility with metalworking environments and resists wear when contacting common workshop materials. Does the device provide a data output for logging measurements? The instrument includes an RB 5 data output option for connection to recording or SPC equipment, enabling measurement logging and traceability. What calibration should be expected on delivery? The tool is supplied to factory standard (Werksnorm); calibration and documentation follow the manufacturer’s standard procedures as stated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Built-In Caliper With Separate Display 0.01mm Resolution, Capacitive System - Metav IndustryLine
Take advantage of the combination of a 300 mm measuring range, 0.01 mm resolution and a lightweight aluminium measuring beam for reliable, repeatable shop‑floor measurement; the capacitive sensor and separate readout facilitate built‑in installation and clear monitoring. Order the caliper directly via Metav Werkzeuge or ask our advisers for integration guidance. Digital built‑in caliper ALU, 300 mm – Capacitive system with separate display (Metav IndustryLine) The Digital built‑in caliper ALU, 300 mm is a flush‑mount capacitive caliper with a remote display designed for standard workshop and production measurement tasks, offering fast, repeatable readings for component inspection and process control. 0.01 mm resolution Separate remote display Aluminium profile measuring beam Capacitive measurement technology Precision that supports production consistency The instrument delivers 0.01 mm display resolution alongside a specified accuracy of 0.06 mm, ensuring a measurable improvement in pass/fail decisions and set‑up verification compared with lower‑resolution gauges. Classified in the Standard (100–300 mm) category, the caliper provides a practical balance of reach and stiffness for everyday tasks in machine shops and metalworking environments, making it suited to routine quality checks and assembly inspections without compromising repeatability. Clear readout and reliable signal processing for fast decisions A separate, built‑in display houses the On/Off, Zero, mm/inch, ABS and Set controls to simplify workshop workflows and reduce the need to handle the measuring head during readout. The capacitive measuring system minimises contact noise and drift, delivering stable digital values for quick recording. The remote display arrangement allows the measuring beam to be mounted in confined or recessed positions while retaining an ergonomic, easy‑to‑view readout for operators on the bench. Lightweight construction with robust workshop characteristics The measuring beam is an aluminium profile, giving a low mass (approx. 0.45 kg) and easier handling during installation and maintenance while maintaining sufficient rigidity for a 300 mm span. The digital built‑in design protects the electronics and sensor during series use and supports fixed installations in jigs or fixtures where space is limited. These design choices reduce operator fatigue and help maintain consistent contact pressure and repeatable measurement results across shifts. Practical fit for manufacturing and inspection processes This caliper suits standardised production environments where clear digital values and compact installation are required. The combination of a capacitive sensor, separate readout and common control functions such as mm/inch conversion and ABS mode supports rapid checks, incoming inspection and simple process control tasks. Metav IndustryLine components are positioned to provide accessible precision for workshops that require dependable measurement without complex setup. For advice on integrating the Metav IndustryLine digital built‑in caliper with 0.01 mm resolution and separate display into production or inspection equipment, contact Metav Werkzeuge in Emmerich for tailored delivery and configuration support Technical data Article number: M218.266 GTIN: 4054469163864 Manufacturer: Metav IndustryLine Weight: 0.45 kg EClass: 21170344 Numbers Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Accuracy: 0.06 mm Measuring system: capacitive Display functions: On/Off, Zero, mm/inch, ABS, SET Special features Measuring beam: aluminium profile Built‑in installation with separate remote display Digital caliper, capacitive sensor technology Remote display with basic function keys FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–300 mm and is classified as a Standard length instrument suitable for general workshop and machine‑shop use. What is the display resolution and can it show imperial units? The instrument displays 0.01 mm resolution and supports inch readout at 0.0005 in via the mm/inch function on the separate display. How is the readout arranged for recessed or built‑in installations? The caliper uses a separate remote display so the measuring beam may be mounted in confined or recessed positions while the readout remains accessible for the operator. Which sensor principle is used and what does that mean for stability? A capacitive measuring system is used; this provides stable digital readings with reduced susceptibility to mechanical contact noise compared with some simpler sensing methods. Is the measuring beam suitable for routine industrial use? Yes, the beam is an aluminium profile, offering a low mass of approx. 0.45 kg with adequate stiffness for everyday inspection and assembly tasks on a 300 mm span. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper 0.01mm Resolution Automatic Power-Off, IP67, Stainless Hardened Steel, Four-Point Measurement, Plastic Case - Metav IndustryLine
Take advantage of a robust, workshop-ready digital caliper that combines IP67 protection, a hardened stainless steel body and a precise 0.01 mm resolution to ensure reliable, repeatable measurements on the production floor; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M216.163.D (0–300 mm, IP67) — Metav IndustryLine The Digital Caliper M216.163.D is a workshop-grade 0–300 mm measuring instrument designed to meet DIN 862 requirements, offering sealed operation for damp or dusty environments and a clear, function-rich digital readout IP67 protection for harsh environments Resolution 0.01 mm with ±0.03 mm accuracy Hardened stainless steel construction Four measurement functions: in/out/depth/step Reliable precision that fits everyday workshop work The M216.163.D is built as a standard-range caliper (0–300 mm), the size that best balances reach and rigidity for everyday tasks in machining and metalwork. With a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, the instrument delivers measurements compatible with standard inspection routines and quality-control checks according to DIN 862. The hardened stainless steel frame reduces wear and helps retain calibration over repeated use, supporting consistent measurement results across production batches. Sealed design and robust materials reduce downtime Thanks to its IP67 rating, this digital instrument tolerates dust ingress and temporary immersion, allowing safe use in workshop areas where coolant spray or fine particles are present. The corrosion‑resistant, hardened construction minimises susceptibility to surface damage and deformation, which keeps calibration stable and lowers maintenance requirements. The compact weight of 0.6 kg aids handling while the 60 mm jaw length offers secure grip on typical components without compromising accessibility. Practical digital functions for faster inspection The capacious digital display provides intuitive controls for inch/metric conversion, mode selection, data hold and on/off, while an energy-efficient 3 V CR2032 battery powers the unit with an automatic shut‑off to extend battery life. Note that the instrument is supplied without a data output interface, so it is ideal where reliable manual reading and quick documentation are the priority rather than electronic data capture. The device’s straightforward operation reduces time per inspection and helps maintain throughput in shop-floor quality checks. Versatile measurement capability for workshop tasks Equipped for four measurement functions — external, internal, depth and step — the caliper covers the usual inspection needs of design, fixture and component manufacturing. Classified as a standard caliper, it is suitable for workshop preparation, assembly control and maintenance tasks where a balance of reach and rigidity is required. The combination of practical functions and robust design makes it a dependable choice for routine dimensional verification. For application-specific advice or to arrange supply of this Metav IndustryLine caliper, contact Metav Werkzeuge — our consultants will recommend the best option for the operational environment and measurement plan Technical Data Article number: M216.163.D GTIN: 4054469182933 Manufacturer: Metav IndustryLine Category: Digital calipers Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Weight: 0.6 kg Jaw length: 60 mm Battery: 3 V CR 2032 Special features Material: stainless steel, hardened Protection class: IP67 Display functions: inch/metric, mode, hold, on/off Auto power-off Four measurement functions: outside, inside, depth, step No data output FAQ What measuring range and accuracy does this caliper offer? The Metav IndustryLine Digital Caliper M216.163.D covers 0–300 mm with a display resolution of 0.01 mm and a declared accuracy of ±0.03 mm, suitable for standard workshop inspections. Can the caliper be used in wet or dusty conditions? Yes. The instrument is rated IP67, permitting use in environments with dust exposure and temporary immersion, which helps protect measuring surfaces and electronics. Does the caliper provide electronic data output for SPC systems? No. The device is supplied without a data output interface and is optimised for manual reading and documentation rather than direct digital transfer. Which measurement tasks are supported by this caliper? The caliper supports four measurement functions — external, internal, depth and step — covering typical workshop and assembly inspection duties. What battery does the caliper use and are there energy-saving features? The unit uses a 3 V CR2032 battery and includes an automatic shut‑off to conserve power during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper 0.01mm/0.0005" Fraction Display, mm/inch/On-Off-Null Buttons, Four-Point Measurement, Hardened Stainless Steel, Case - Metav IndustryLine
Take advantage of precise, workshop-ready measuring: the combination of 0.01 mm resolution, hardened stainless construction and four measuring functions ensures reliable, repeatable results for routine production and quality control. Order the caliper directly via Metav Werkzeuge or ask the consultants for matching accessories and data interfaces. Digital caliper M216.173 (300 mm) — Digital readout mm/inch/fraction, 0.01 mm The Digital caliper M216.173 is a 300 mm precision measuring instrument for standard workshop and machine‑shop use, offering metric, imperial and fractional readouts for flexible inspection tasks. *Digital display mm/inch/fraction *Resolution 0.01 mm / 0.0005" *Hardened stainless steel construction *Four measuring functions *Delivered in protective transport box Consistent shop-floor accuracy with measurable resolution Equipped with a 0.01 mm resolution and a class‑typical digital readout, this caliper supports dependable tolerance checks across routine production tasks. For the 0–300 mm range the unit sits in the standard class of calipers, which balances reach and rigidity for common metalworking and assembly operations. The high‑contrast digital display reduces reading errors and the fractional mode (1/128") simplifies work with legacy drawings or imperial specifications. These traits make the tool a practical choice where traceable, repeatable measurements help reduce rework and maintain process efficiency. Robust construction for daily workshop handling A hardened stainless steel body gives the instrument resistance to wear and a stable measuring face over long service intervals. The compact mass and balanced feel support single‑hand operation while the included transport box protects the instrument in transit and on busy benches. Together, durability and protected storage minimise downtime and prolong the tool’s useful life, which is particularly valuable where multiple operators or shift work increase handling frequency. Flexible measurement modes for varied inspection needs The caliper offers four measuring functions, enabling outside, inside, depth and step measurements with the same instrument, which streamlines inspection routines and reduces tool changes. The digital electronics provide fast switching between mm, inch and fraction displays, plus convenient zeroing and on/off controls, so measurement cycles are shortened and data remain clear—benefits that translate directly into faster setup times and more consistent quality checks. Integration-ready output and clear product identity A dedicated data output (RB 6) is provided for external capture of measured values, supporting documentation and SPC collection without manual transcription. The instrument is identified by article number M216.173 and GTIN 4054469169019 for inventory and procurement processes. Supplied weight and dimensions make the caliper straightforward to store and integrate into inspection kits, and the hardened jaws ensure long‑term contact reliability for frequent use. Contact Metav Werkzeuge for specification matching and to secure the Metav IndustryLine digital caliper M216.173 for your workshop supply needs Technical data Article number: M216.173 GTIN: 4054469169019 Label: Digital caliper 300 mm, display in mm/inch/fraction Manufacturer: Metav IndustryLine SKU: M216.173 ECLASS: 21170344 Customs tariff: 90173000 Facts Measurement range: 0–300 mm Resolution: 0.01 mm Imperial resolution: 0.0005" / 1/128 Weight: 0.6 kg Special features Digital display with ON/OFF, ZERO and mm/inch/fraction functions Four measuring functions: outside, inside, depth and step Material: hardened stainless steel Data output: RB 6 Delivered in a transport box for protection FAQ What measurement modes are available with this caliper? The instrument supports outside, inside, depth and step measurements via its four measuring functions; values are shown on the digital display in mm, inch or fraction. How precise is the readout on the caliper? The caliper provides a 0.01 mm resolution and an imperial readout equivalent to 0.0005" or 1/128", suitable for standard workshop quality control across the 0–300 mm range. Is the caliper suitable for daily shop use? Yes. The hardened stainless steel construction and supplied transport box make it robust for regular handling and storage in busy production environments. Can measured data be exported to a data logger or PC? A data output interface (RB 6) is available for external capture of values, enabling straightforward transfer to compatible data collection systems. What identifiers help with ordering and inventory? Use article number M216.173 and GTIN 4054469169019 to ensure the correct Metav IndustryLine digital caliper is procured. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute ABS, 0.01mm Resolution, Tolerance LED, IP54, Four‑Function Measurement, Delivered in Case - Metav IndustryLine
Take advantage of the combination of IP54 protection, the TOL‑LED tolerance indicator and the ABS absolute measuring system for fast, reliable shop‑floor decisions; order directly via Metav Werkzeuge or consult the team for technical advice. Digital caliper 300 mm M216.223 — IP54, TOL‑LED & ABS absolute system (Metav IndustryLine) The Digital caliper 300 mm is a workshop-grade measuring instrument designed for dimensional checks in metalworking, quality control and general workshop tasks. IP54 protection for dusty workshop environments TOL‑LED for immediate tolerance visualisation ABS absolute system; ORIGIN and MODE functions 0.01 mm resolution with DIN 862 accuracy Four measurement modes: inside/outside/depth/step Faster decisions with visual tolerance control A clear TOL‑LED tolerance indicator shortens inspection time by showing pass/fail results at a glance, which reduces rework and speeds throughput. Combined with a 0.01 mm display resolution and conformity to DIN 862, this tool provides the measurable certainty required in production and incoming inspection. The caliper supports the fundamental measurement tasks—inside, outside, depth and step—so single‑instrument checks replace multiple gauges while keeping traceable numeric output for process documentation. Built to withstand workshop conditions and repeatable use The jaw and beam are made from hardened stainless steel with a glass-reinforced scale, providing long service life and resistance to normal workshop wear. An IP54 rating protects the electronics against dust ingress and splash water, maintaining reliability in harsher environments. The ABS absolute system (3 V) ensures the instrument retains its reference position after power cycles, while ORIGIN, MODE, TOL, HOLD and INC/ON‑OFF controls make operation straightforward during repetitive checks. The robust construction and intuitive controls support consistent results across shifts. Practical integration that saves time on the shop floor The caliper has a resolution of 0.01 mm (0.0005 in) and offers an operation without measurement speed limits, which means faster sliding and less waiting during checks. The instrument’s compact ergonomics and defined jaw geometry (60/26 mm) help maintain repeatability when taking measurements on machined parts or assemblies. Delivery includes a transport case for safe handling and storage, facilitating mobile use between machines or inspection benches. The 4‑mode measuring capability consolidates routine tasks and reduces tool changes, improving overall efficiency. For clear tolerance control and robust workshop performance choose the Metav IndustryLine Digital caliper 300 mm; contact Metav Werkzeuge in Emmerich for ordering or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M216.223 GTIN: 4054469164236 Category: Messschieber Weight: 0.4 kg Material: hardened stainless steel; scale with glass beam Protection class: IP54 Facts Measurement range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Jaw length: 60/26 mm System: Absolute (3 V) Four measurement modes: inside / outside / depth / step Special features TOL‑LED tolerance indicator ORIGIN, MODE, TOL, HOLD, INC, ON/OFF controls Conforms to DIN 862 accuracy requirements No measurement speed limitation Delivered in a transport case (plastic/wooden) FAQ What accuracy can be expected from this caliper? The caliper provides a resolution of 0.01 mm and is specified to meet the accuracy criteria of DIN 862, making it suitable for standard workshop and quality‑control tasks. Can the instrument perform inside and depth measurements? Yes, the tool supports four measurement modes—inside, outside, depth and step—so a single instrument covers common dimensional inspections. How does the TOL‑LED function help in production control? The TOL‑LED gives immediate visual feedback on whether a measured value lies within set tolerance limits, enabling faster go/no‑go decisions and reducing manual data interpretation. Is the caliper resistant to workshop dust and coolant splashes? The unit carries an IP54 rating, providing protection against dust and splashing water typical in machining environments. Does the caliper retain its zero after switching off? The ABS absolute system maintains the reference position even after power‑off, removing the need for re‑zeroing before each measurement session. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute ABS, Removable Thumb Roller, 0.01mm Resolution, 4‑Function Measuring, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of precise workshop measurement with a compact, robust instrument: a 300 mm range, 0.01 mm resolution and an ABS absolute system ensure reproducible results across routine inspection and production tasks. Order the caliper directly via Metav Werkzeuge or request further technical advice from our consultants. Digital caliper M216.237.N — 300 mm absolute system with removable thumb roller (Metav IndustryLine) Digital caliper M216.237.N is a workshop-grade measuring instrument for mechanical and metalworking applications, designed for repeatable, easy-to-read measurements in production and quality control. 300 mm measuring range, workshop standard 0.01 mm resolution, precise readout ABS absolute system with removable thumb roller Four measurement modes: inside, outside, depth, step Reliable precision for everyday workshop measurement The instrument is classified as a standard caliper for the 0–300 mm range, which balances reach and stiffness for most machining and assembly tasks. A resolution of 0.01 mm (0.0005 in) combined with the ABS absolute measuring system produces clear, immediate readings and reduces the need for repeated zeroing. Conformance to DIN 862 provides an established frame of reference for accuracy expectations in workshop and quality control environments, making the tool suitable for routine inspection and process checks where reproducibility matters. Versatile handling and fourfold measuring capability Equipped with a removable thumb roller, the caliper is usable with or without the roller to suit ergonomic preferences and handling in tight spaces. The slider integrates an ABS absolute encoder powered at 3 V, while the display offers ORIGIN, UNIT, ON/OFF and 0/ABS functions for straightforward operation. The design supports four measurement modes — outside, inside, depth and step — which reduces the need for separate instruments and speeds up inspection cycles. A dedicated RB 5 data output enables connection to data capture systems for traceable measurement logging. Robust construction for repeatable results The measuring frame is made from hardened stainless steel with a glass scale rail, selected to maintain dimensional stability and resist wear under regular workshop use. The material pairing gives consistent contact geometry and reduces wear at the measuring faces, which helps retain accuracy over time. At 0.7 kg the instrument remains manageable for handheld work while providing sufficient mass for stable operation. Delivery in a transport case protects the instrument during shipment and storage, supporting longevity and secure handling between job sites. Integration and efficiency in quality workflows With a built-in data interface (RB 5) and an absolute measuring system, the caliper can be integrated into batch inspection routines and basic digital quality records without complex setup. The combination of immediate absolute readings and a standard data output reduces manual transcription errors and supports faster throughput in repetitive measurement tasks. Where traceability is required, the instrument’s display functions and digital output simplify documentation of nominal values and deviations for production feedback loops. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine digital caliper M216.237.N or request detailed datasheets via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M216.237.N GTIN: 4054469159379 Brand: Metav IndustryLine Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Measuring system: Absolute (ABS), 3 V Data output: RB 5 Display functions: ORIGIN, UNIT, ON/OFF, 0/ABS Weight: 0.7 kg Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Weight: 0.7 kg Material hardness: hardened stainless steel Data interface: RB 5 Special features Hardened stainless steel with glass scale rail Removable thumb roller; usable with or without drive roller Four measurement modes: outside, inside, depth, step Transport case supplied FAQ What measurement modes are available on this caliper? The caliper supports four measurement modes — outside, inside, depth and step — enabling versatile inspection without additional tools; these functions are available via the slider and clearly indicated on the display of the Metav IndustryLine digital caliper M216.237.N. How accurate is the Metav IndustryLine digital caliper for routine inspections? The instrument provides a resolution of 0.01 mm (0.0005 in) and is manufactured to meet DIN 862 standards, making it suitable for standard industrial quality control and workshop measurement tasks. Can measurement data be exported for documentation? Yes. The caliper features an RB 5 data output for connection to data loggers or PC interfaces, facilitating digital capture of measuring results from the Metav IndustryLine unit. Is the thumb roller fixed or removable? The thumb roller is removable and the caliper is designed to be operated with or without the roller, allowing adaptation to ergonomic preferences and confined measuring situations. What materials and construction ensure durability? Construction uses hardened stainless steel with a glass scale rail, chosen to provide wear resistance and stable measuring geometry under regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute Display With On/Off 0/ABS Mm/Inch Origin IP54, Supplied In Case - Metav IndustryLine
Benefit from the combination of IP54 protection, an absolute measuring system and four measuring modes for dependable workshop performance. Order the Digital Caliper M216.257 directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper M216.257 — 300 mm absolute digital caliper, IP54 (Metav IndustryLine) The Digital Caliper M216.257 is a robust workshop caliper designed for precise linear measurements in machining and quality control, offering an absolute measuring system and a protected enclosure for everyday industrial use Absolute measuring system for stable readings IP54 protection against dust and splashes 4-in-1: inside, outside, depth and step Stainless steel body with glass scale Consistent accuracy for shop-floor measurements The caliper is built around an absolute measuring system that delivers repeatable readings and reduces the need for frequent re-zeroing. With a stated accuracy of 0.03 mm and conformity to DIN 862, the instrument suits standard metrology tasks in machine shops and production control. The 300 mm measuring range classifies this tool as a Standard caliper, offering the best compromise between reach and rigidity for general workshop use. The four measuring modes — external, internal, depth and step — make the instrument polyvalent, simplifying inspection routines and reducing the number of separate gauges required on the bench. Robust construction for industrial environments Durability is addressed through a stainless steel body combined with a glass scale, which together resist wear while keeping the measuring surfaces stable. The enclosure rating IP54 protects the electronics from dust ingress and water splashes, permitting reliable use in tougher shop-floor conditions. A delivery case is included for transport and storage, helping to protect the caliper between shifts. At approximately 0.8 kg, the instrument balances solidity with handling comfort so that repetitive measuring tasks remain straightforward and controlled. Clear display, practical controls and data output The digital display is fitted with practical controls — on/off, 0/ABS, mm/inch and an Origin button — enabling fast switching between functions and measurement systems. Power is supplied by a 3 V CR2032 battery, providing long operating intervals for typical inspection workloads. For traceable data transfer, the caliper offers an RB 6 data output interface, allowing measured values to be recorded directly into data-collection systems or inspection software. The device is also usable with or without a drive roller, increasing compatibility with diverse setup arrangements on measuring stations. Practical fit for production and quality assurance Intended for workshop metrology, the tool supports routine dimensional control, first-article inspections and rework verification. Its combination of standards compliance, multiple measuring functions and secure data output reduces measurement-related downtime and streamlines documentation. The construction and interface choices mean the caliper integrates readily into existing inspection procedures, while the Standard measuring length remains a versatile option across general engineering, maintenance and small-batch manufacturing environments. Contact Metav Werkzeuge to request further technical details or to procure the IP54 Digital Caliper M216.257 directly from our Emmerich stock Technical data Article number: M216.257 GTIN: 4054469182575 Label: Digital Caliper 300 mm, IP54 DIN 862 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–300 mm Accuracy: 0.03 mm Display resolution: 0.03 mm Weight: 0.8 kg Jaw length: 60 mm Battery: 3 V CR2032 Protection class: IP54 Special features / Versions Absolute measuring system Conforms to DIN 862 4-in-1 measurement: external, internal, depth, step Data output: RB 6 Digital display with ON/OFF, 0/ABS, mm/inch, Origin Stainless steel body with glass scale Supplied in transport case Usable with or without drive roller FAQ What measurement range does this caliper cover? The Digital Caliper M216.257 covers a measuring range of 0–300 mm, classifying it as a Standard caliper suitable for general workshop tasks. How accurate is the instrument for daily inspections? The instrument provides an accuracy of 0.03 mm and is manufactured to comply with DIN 862, making it appropriate for standard machine‑shop quality checks. Which measuring functions are available? The caliper supports four functions: external, internal, depth and step measurements, enabling broad use across inspection routines. Is the caliper suitable for dusty or damp shop conditions? Yes, the device carries an IP54 rating, so the electronics are protected against dust and splashing water for reliable shop‑floor operation. How are readings transferred to a PC or data logger? Readings can be exported via the RB 6 data output; the caliper’s digital interface and simple controls facilitate integration with data‑collection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute System With Removable Roller, IP54 - Metav IndustryLine
The combination of IP54 protection, an Absolute measuring system and a removable drive roller provides dependable workshop performance and reproducible results; ideal for standard metrology tasks in production. Order the Digital Caliper 300 mm directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper M216.227 – 300 mm, Absolute system, IP54 (Metav IndustryLine) The Digital Caliper M216.227 is a robust, workshop‑ready measuring instrument designed for precise dimensional control in machining and inspection tasks. Absolute measuring system, resolution 0.01 mm IP54 splash protection for workshop use Removable drive roller for continuous measurement Four‑function measurements: inside/outside/depth/step Precision and measurement reliability for routine inspection The Digital Caliper M216.227 combines an Absolute measuring system with a standard resolution of 0.01 mm and inch readout to 0.0005 in, delivering stable, drift‑free position values after power cycles. This technical basis reduces the need for repeated zeroing and supports efficient batch inspection. The caliper’s four‑function measurement capability enables inside, outside, depth and step readings with a single instrument, which shortens process steps and increases throughput when several measurement types are required. Built for the workshop: durability and handling advantages Built from stainless hardened steel with a glass scale, the caliper resists wear while keeping the slide smooth and repeatable. The IP54 rating protects against workshop dust and splash, so measurements remain reliable in harsher environments. The removable drive roller offers flexible operation: measurements can be taken with the roller fitted for continuous surface runs or without it for traditional jaw contact. Classified within the Standard (100–300 mm) range, this instrument balances reach and rigidity for everyday machine‑shop and metalworking tasks. Efficient data flow and user‑oriented operation The device provides a practical digital interface with ON/OFF, 0/ABS, mm/inch and ORIGIN functions, simplifying setup and unit changes on the shop floor. A dedicated RB 6 data output enables secure transfer of measured values into inspection software or data loggers, supporting traceable quality records. Compliance with DIN 862 ensures that measurement behaviour matches established workshop expectations. Together, these features improve measuring chain efficiency and reduce transcription errors during quality control. Contact Metav Werkzeuge to arrange supply of the Metav IndustryLine digital caliper M216.227 with IP54 protection and RB 6 data output for straightforward integration into existing inspection routines. Technical Data Article number: M216.227 GTIN: 4054469158303 Brand: Metav IndustryLine ECLASS: 21170344 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Weight: 0.4 kg Protection class: IP54 Special features Absolute measuring system (3 V) Removable drive roller Four‑function measurement (inside/outside/depth/step) Material: hardened stainless steel; scale with glass slide Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, ORIGIN Complies with DIN 862 FAQ Is the caliper suitable for everyday machine‑shop use? The M216.227 is designed for workshop environments with its IP54 protection and hardened stainless construction, making it suitable for routine machining and inspection tasks. Can measurements be recorded automatically? Yes. The caliper provides an RB 6 data output for direct transfer of measured values into inspection systems or data loggers. Which measurement functions are available? The instrument supports four measurement modes: outside, inside, depth and step measurements, enabling versatile use across components. Does this caliper retain its reference after switching off? The Absolute measuring system maintains position information when powered down, so the caliper returns to the correct zero reference on restart. Is the roller always required for measurement? No. The removable drive roller is optional; the caliper can be used with or without the roller depending on the measurement task. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Antimagnetic Stainless Steel With Round Depth Rod, Four‑Function Readout, DIN 862 - Metav IndustryLine
Combining an antimagnetic, non‑magnetic stainless‑steel construction with a 0–300 mm measuring range and an RB 5 data output, this caliper delivers reproducible shop‑floor measurements and smooth data transfer for quality control. Order directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper M216.177 (300 mm) – antimagnetic, stainless steel, RB 5 The Digital caliper M216.177 is a standard‑range precision instrument for general workshop and machine‑shop measurements, offering digital readout and antimagnetic stainless construction for reliable use in mixed‑material environments. Digital display with ON/OFF, ZERO, UNIT, HOLD Antimagnetic, non‑magnetic stainless steel construction Four‑way measurement: inside, outside, depth, step Includes protective transport case Robust precision for daily workshop use The caliper is engineered from non‑magnetic stainless steel, providing corrosion resistance and immunity to magnetic interference where repeatable readings matter. With a 0–300 mm measuring range it falls into the Standard class of calipers, which balances reach, stiffness and one‑hand operation—ideal for routine tasks in machining and metalwork. The compact mass (approx. 0.3 kg) and durable jaw geometry support stable clamping and minimise bending during measurement, so measurements remain consistent across production runs. Digital workflow and reliable data transfer Equipped with a clear digital display and buttons for ON/OFF, ZERO, UNIT and HOLD, the instrument reduces transcription errors and speeds up quality checks. The RB 5 data output allows direct connection to data collection systems or PCs for traceable documentation and statistical process control. Supplied with a 3 V power system, the electronic unit follows industry practice for shop‑grade digital calipers and complies with DIN 862, ensuring the device meets recognised measuring standards and integrates smoothly into existing inspection routines. Versatile measurement capability and secure transport This caliper supports four‑way measurement—inside, outside, depth and step—with a round depth rod for easier engagement in narrow features. The jaw lengths of 60/26 mm permit access to common measuring situations, while the included protective case safeguards the tool during transport and storage. Delivered as a complete set, the instrument is suitable for workshop inspection, maintenance departments and precision assembly lines where dependable, repeatable gauges are required. Choose the Metav IndustryLine digital caliper for robust, shop‑grade measuring performance and contact Metav Werkzeuge in Emmerich for tailored advice and fast supply. Technical Data Article number: M216.177 GTIN: 4054469168234 eClass: 21170344 Customs tariff number: 90173000 Numbers / Core technical data Measuring range: 0–300 mm Maximum measuring range: 300 mm Weight: 0.3 kg Jaw length: 60/26 mm Power supply: 3 V Label: Digital‑Messschieber, 300 mm, antimagnetisch Data output: RB 5 Special features / Versions Antimagnetic design Material: non‑magnetic stainless steel Digital display with ON/OFF, ZERO, UNIT, HOLD Four‑way measurement (inside, outside, depth, step) Round depth gauge Supplied in protective case Conforms to DIN 862 FAQ What measurement range does this caliper cover? The Digital caliper M216.177 covers a measuring range of 0–300 mm, classifying it as a Standard caliper suitable for typical workshop and machine‑shop applications. Is the instrument suitable for work near magnetic fields? Yes. The antimagnetic, non‑magnetic stainless‑steel construction of the M216.177 reduces magnetic influence and is designed for environments where magnetic interference could otherwise affect readings. Can measurement data be exported to a PC or data logger? Yes. The caliper features an RB 5 data output for connection to data acquisition systems, enabling direct transfer of readings for documentation and quality control. Which measurement tasks can be performed with this caliper? The device supports inside, outside, depth and step measurements (four‑way measurement) and includes a round depth rod for access to narrow features, making it versatile for components, housings and assemblies. Does the caliper meet recognised standards? The instrument is manufactured to comply with DIN 862, aligning it with common workshop inspection and quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Fine Adjustment, 0.01mm Resolution, Stainless Hardened, K-Fit Case - Metav IndustryLine
Take advantage of the combination of high-resolution digital reading, fine-adjustment control and a hardened stainless-steel construction for dependable workshop measurements; order directly via Metav Werkzeuge or consult our advisors for tailored advice. Digital caliper M217.052 — digital caliper with 0–300 mm range and fine adjustment The Digital caliper M217.052 is a workshop-grade measuring instrument designed for universal use in metalworking and general engineering, offering a compact measuring span with precise, repeatable digital readings. Digital display with mm/inch and preset Fine-adjustment slider for controlled measuring Hardened stainless-steel construction Supplied in a protective transport case Consistent workshop accuracy for everyday quality control This caliper is designed to meet ordinary industrial demands within the Standard measuring range (0–300 mm), where reach and rigidity must be balanced. The instrument provides a resolution of 0.01 mm (0.0005 in) and is supplied to the manufacturer's Werksnorm 0.03 mm, which makes it suitable for routine dimensional checks and shop-floor quality control. The numerical specifications translate into fewer re-measurements, faster setup of machining operations and reliable pass/fail decisions when used alongside standard inspection routines. Faster measurements and seamless data handling for process reliability A clear digital display with ON/OFF, mm/inch, zero/ABS, HOLD, TOL and PRESET functions reduces interpretation errors and speeds up measuring cycles. The integrated fine-adjustment slider permits gentle, controlled contact force, improving repeatability when setting small tolerances. For traceable data transfer, the caliper includes an RB 5 data output and runs from a 3 V power source; these attributes facilitate simple integration into inspection workflows and support efficient documentation of measured values. Robust design and transport-ready packaging for everyday use Constructed from fully hardened stainless steel, the caliper resists routine shop wear and offers long service life in humid or coolant-prone environments. The longer jaw length improves access to recessed features, while the instrument is supplied in a protective transport case, ensuring safe storage and mobility between workstations. The combination of robust materials and practical packaging reduces downtime and protects the instrument during transport or on-site handling. Contact Metav Werkzeuge for ordering and to discuss how the M217.052 can be integrated into your inspection process; Metav’s specialists in Emmerich provide practical advice and delivery planning. Technical data SKU: M217.052 GTIN: 4054469110912 ECLASS: 21170344 Manufacturer: Metav IndustryLine Article designation: Digital caliper, 0–300 × 150 mm, without probe Facts Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Accuracy (werksnorm): 0.03 mm Jaw length: 150 mm Power: 3 V Tariff code: 90173000 Special features Material: hardened stainless steel Fine-adjustment slider Digital display functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 Supplied in protective transport case FAQ What level of accuracy can be expected from this caliper? The Digital caliper M217.052 is supplied to the manufacturer's Werksnorm of 0.03 mm with a display resolution of 0.01 mm, making it suitable for standard workshop and inspection tasks. Can measurements be recorded electronically from the instrument? Yes, the caliper includes an RB 5 data output for straightforward capture of readings into data-loggers or inspection software. Is the instrument suitable for routine machining and maintenance work? With a 0–300 mm measuring range and a hardened stainless-steel construction, the device is classified for standard workshop use and is well suited to machine-shop routines. Which functions assist with go/no-go checks? The integrated TOL and PRESET functions on the display allow for quick tolerance checks and preset reference values, simplifying pass/fail workflows. Does the caliper include a case for transport and storage? The instrument is supplied in a protective transport case to safeguard it during movement between workstations and during storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper For Pipe Wall Thickness Measurement 0.01mm Resolution, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from traceable shop‑floor measurement through an ISO 17025‑calibrated instrument, combined with robust IP54 protection and convenient USB data transfer — ideal for standard workshop and quality‑control tasks. Order directly via Metav Werkzeuge or consult our product specialists for application advice. Digital Caliper — 0–300 mm precision, ISO 17025 calibrated, USB output (Microtech Metrology) The Digital Caliper is a 0–300 mm precision caliper with USB data output and IP54 ingress protection, designed for routine measurement tasks in machine shops and quality departments. ISO 17025 calibration certificate included USB data output for traceable records 0–300 mm measuring range IP54 dust and splash protection Traceable accuracy that suits production control The instrument delivers an accuracy of ±0.03 mm with a standard resolution of 0.01 mm, providing a reliable balance between speed and repeatability for production checks. Supplied fully calibrated to ISO 17025, the caliper arrives with an official calibration certificate, which supports internal quality records and audits. For workshop metrology this means fewer follow‑up checks and clearer compliance documentation. Built to perform on the shop floor With an IP54 rating and a jaw length of 50 mm, the gauge resists typical dust and splash exposure while offering stable contact on workpieces. The 0–300 mm measuring range places the tool in the Standard class of calipers, which is the preferred choice for general machining, fixture checks and assembly work because it combines sufficient reach with good stiffness for single‑handed measuring. Practical data handling and ergonomic readout Data transfer is handled via USB, enabling straightforward capture of measurement results into inspection software or spreadsheets for statistical process control. The instrument features a 13 mm digital display for clear readout in various lighting conditions; this reduces reading errors and speeds up logging during batch inspections. No applied measuring force is specified, which helps prevent part deformation on delicate samples. Benefits for workshop efficiency and quality assurance Integration of a calibrated digital gauge shortens inspection cycles and improves traceability: measurements can be recorded directly from the instrument, archived together with the supplied ISO 17025 certificate and referenced during audits. The device’s combination of robust enclosure, practical display and standardised data output supports leaner processes and fewer manual transcription errors in routine quality workflows. Order the Microtech Metrology ISO 17025‑calibrated digital caliper via Metav Werkzeuge for reliable, auditable measurement on the shop floor or request tailored advice from Metav’s consultants at info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 141230300 GTIN: 4061905457845 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: ±0.03 mm Resolution (display): 0.01 mm Display height: 13 mm Jaw length: 50 mm Measuring cone diameter: 4 mm Protection class: IP54 Special features Digital display USB data output ISO 17025 calibration certificate included Standard class caliper for workshop use No applied measuring force specified FAQ What level of calibration is supplied with the caliper? The caliper is supplied fully calibrated to ISO 17025 and includes the official calibration certificate from Microtech Metrology. How is measurement data transferred from the instrument? Measurement data is exported via the USB data output for direct capture into inspection software or spreadsheets. Is the caliper suitable for shop‑floor use? Yes; with IP54 protection and a robust design, the caliper is intended for routine measurements in machine shops and quality departments. What measuring range and accuracy does the device offer? The instrument covers 0–300 mm and provides an accuracy of ±0.03 mm with a display resolution of 0.01 mm. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Caliper Inductive System IP67, 0.01mm Resolution, Three-Point Measurement, Supplied Calibrated with Certificate - Metav IndustryLine
Take advantage of high industrial reliability with the combination of 0.01 mm resolution, IP67 protection and an inductive measuring system for consistent workshop throughput; order via Metav Werkzeuge or contact our consultants for tailored advice. Digital caliper M216.183 — 300 mm, IP67 inductive system (Metav IndustryLine) The Digital caliper M216.183 is a robust 300 mm precision measuring instrument designed for standard workshop metrology and production quality control. Inductive measuring system, DIN 862 compliant 300 mm measuring range for standard workshop use IP67 dust and water protection for harsh environments Stainless hardened steel construction with locking screw Built for dependable, reproducible measurements on the shop floor The instrument uses an inductive system that resists contamination and provides a stable signal for reliable readings; combined with the 0.01 mm resolution this reduces rework and inspection time by delivering repeatable data on each measurement cycle. Conformity with DIN 862 ensures the caliper meets recognised workshop standards, while the IP67 rating protects the electronics during everyday exposure to coolant, chips and dust. The result is a measuring tool that supports faster decision-making on the production line and fewer measurement-related stoppages. Practical handling for multiple measuring tasks Designed as a universal workshop tool, the caliper supports 4‑fold measurement (internal, external, depth and step), so both small components and assembly features can be checked with the same instrument. The MODE mm/inch display and clear digital readout simplify unit conversion and reduce reading errors; a dedicated 0/ON/OFF function speeds start-up and conserves battery life. A locking screw secures the slider for transfer measurements, enabling accurate comparison checks and gauge-setting without slippage. Durable construction that suits everyday industrial use Made from stainless hardened steel, the caliper balances stiffness and corrosion resistance for long-term dimensional stability. At approximately 0.6 kg, the instrument remains manageable in hand while offering the mass and rigidity needed for consistent contact during measurements. As part of the Metav IndustryLine, the tool benefits from a distribution and quality filter based in Emmerich, reflecting the company’s commitment to making precise measuring technology accessible for workshops and industry alike. For reliable workshop measurement choose the Metav IndustryLine digital caliper M216.183 — contact Metav Werkzeuge in Emmerich for product guidance at info@metav-werkzeuge.com or call +49 2822 7131930 for further assistance Technical data Article number: M216.183 GTIN: 4054469146355 Manufacturer: Metav IndustryLine Standard: DIN 862 Core technical data Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.6 kg Protection class: IP67 Measuring system: inductive Reading/display: MODE, mm/inch, 0/ON/OFF Jaws length: 60/26 mm 4‑fold measurement: internal, external, depth, step Special features Material: stainless hardened steel Locking screw Digital display Norm: DIN 862 FAQ What accuracy and resolution does this caliper provide? The digital caliper M216.183 offers a resolution of 0.01 mm (0.0005 in) and is designed to meet the expectations of DIN 862 for standard workshop measurements. Can this caliper be used in humid or contaminated environments? Yes. The IP67 protection rating and the inductive measuring system make the instrument robust against dust and temporary immersion, suitable for many workshop conditions. Which measuring functions are supported? The caliper performs internal, external, depth and step measurements (fourfold measurement), allowing multiple inspection tasks with a single instrument. How are units switched and readings managed? Unit selection is handled via the MODE function for mm/inch and the digital display includes a 0/ON/OFF key for quick zeroing and power control. Is the caliper suitable for daily production use? The M216.183 is built for standard workshop use with a 300 mm measuring range, hardened stainless construction and a locking screw for stable transfer measurements, making it well suited to routine production checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Inductive System, IP67, Data Output Bluetooth, 0.01mm Resolution, Four-Point Measurement, Hardened Stainless Steel, Case - Metav IndustryLine
Robust IP67 protection, an inductive measuring system and Bluetooth data transfer combine to deliver precise, traceable measurements and efficient data capture for standard workshop applications; order or consult the specialists at Metav Werkzeuge for procurement and application advice. Digital Caliper 300 mm — Metav IndustryLine, IP67 and Bluetooth The Digital Caliper 300 mm is a workshop-grade, inductive precision caliper designed for machine shops, quality control and assembly work where reliable measurements and digital data transfer are required. Inductive measuring system DIN 862 Resolution 0.01 mm / 0.0005 in IP67 protection for harsh environments Bluetooth data output for traceable transfer Consistent precision for everyday quality control The caliper uses an inductive measuring system compliant with DIN 862, offering a resolution of 0.01 mm (0.0005 in) that meets common industrial expectations for digital calipers up to 300 mm. This electronic measuring instrument provides stable readings for routine dimensional checks, while the standardised specification supports reproducible results in serial inspection. The built-in locking screw and hardened sliding surfaces reduce measurement variation caused by handling, improving the reliability of each captured value. Fast, traceable data flows that reduce processing time Equipped with Bluetooth data output and a clear digital display featuring MODE, mm/inch and 0/ON/OFF controls, the caliper enables direct transfer of measured values into inspection software or spreadsheets, eliminating manual transcription and its associated errors. The unit supports the four common measurement modes — inside, outside, depth and step — so data capture can be standardised across different measurement tasks. Integrating the caliper into a digital workflow accelerates documentation and supports traceability in batch production. Built for workshop roughness and ergonomic handling Constructed from hardened stainless steel, the instrument withstands everyday shop use while remaining easy to operate; the weight of 0.6 kg and the jaw geometry (60/26 mm) balance stiffness and manoeuvrability for handheld measurements. With an IP67 rating, the device tolerates dust ingress and temporary immersion, making it suitable for undemanding wet or oily environments often encountered on production floors. Classified as a Standard caliper (measuring range up to 300 mm), it offers the best compromise between reach and rigidity for general mechanical engineering tasks. Practical conformity and workflow advantages Compliance with DIN 862 ensures the caliper fits established inspection routines and is compatible with common measurement standards. The inductive system minimises signal drift and supports repeatable readings during cyclic checks. Bluetooth-enabled data output simplifies logging and audit trails, which is particularly valuable for quality control departments aiming to reduce non-value-adding steps. Together, these attributes boost efficiency and support decision-making based on verifiable measurements. For tailored advice or to procure the Metav IndustryLine Digital Caliper M216.188, contact Metav Werkzeuge in Emmerich — specialists are available to discuss integration into existing measurement processes and to ensure the right configuration for the intended application. Technical data Article number: M216.188 GTIN: 4054469146393 Manufacturer: Metav IndustryLine Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.6 kg Jaw length: 60/26 mm Protection class: IP67 Special features Inductive measuring system Digital display with MODE, mm/inch, 0/ON/OFF Bluetooth data output Four measurement functions: inside, outside, depth, step Locking screw Hardened stainless steel construction FAQ What measuring range and resolution does the caliper offer? The Metav IndustryLine digital caliper provides a measuring range of 0–300 mm with a resolution of 0.01 mm (0.0005 in), suitable for standard workshop and quality-control tasks. Is the instrument suitable for damp or dusty workshop environments? Yes, the caliper carries an IP67 rating, ensuring resistance to dust ingress and temporary immersion, which supports use in wet or oily production settings. How are measured values transferred to documentation systems? Measured values are transmitted via Bluetooth from the Metav IndustryLine caliper, enabling direct capture into inspection software or spreadsheets for traceable records. Which measurement modes are supported by this caliper? The device supports the four common measurement modes — inside, outside, depth and step — allowing versatile application across typical measurement tasks. What standards and construction ensure long-term stability? Constructed from hardened stainless steel and designed to DIN 862, the caliper combines robust materials with an inductive measuring system to deliver stable, repeatable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com