Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
300mm Digital Caliper Large LCD Display mm/inch Reset, USB Output, CR2025 Battery, Depth Rod, Lock Screw, DIN 862 - Filetta
Take advantage of precise workshop measurement with fast data transfer and a clear display: the Filetta digital caliper combines 0–300 mm measuring range, 0.01 mm resolution and USB output for streamlined quality control. The robust depth gauge and locking screw support repeatable measuring routines. Order the Filetta digital caliper M909.442 directly via Metav Werkzeuge or ask our consultants if needed. Filetta Digital Caliper M909.442 — 0–300 mm, 0.01 mm resolution, USB A Filetta Digital Caliper M909.442 designed for general machine‑shop and metrology tasks, offering digital readout, depth‑gauge functionality and standard workshop reach Large LCD with mm/inch display USB data output for digitisation Resolution 0.01 mm, DIN 862 compliant Depth gauge and locking screw included Reliable accuracy for everyday inspection tasks This caliper delivers a 0.01 mm resolution combined with compliance to DIN 862, making it suitable for standard quality control in mechanical workshops and machine construction. The measurement range of 0–300 mm positions the instrument in the standard class, which balances reach and rigidity for most workshop components. The large LCD provides a clear numeric readout including mm/inch switching and a reset function, reducing interpretation errors and accelerating inspection cycles. As a result, inspection throughput increases without compromising documented repeatability. Faster data capture and fewer transcription errors Equipped with USB data output and a conventional power source (1 × CR2025), the instrument enables direct transfer of readings to inspection software or spreadsheets, eliminating manual entry and associated mistakes. The slide includes a locking screw and a 60 mm jaw length to ensure stable clamping during measurement, while the integrated depth gauge and step measurement features increase functional versatility. These attributes reduce process steps and support traceable digital workflows in production and assembly environments. Built for workshop routine and robust handling Designed for everyday use, the caliper combines ergonomic handling with practical features that matter on the shop floor: a tactile slide, intuitive buttons (on/off, mm/inch, reset) and a large LCD for quick checks. The 0–300 mm range is recognised as the universal workshop basis, offering good stiffness for hand measurements across parts, fixtures and housings. The instrument is ideal where a reliable, easy‑to‑read measuring tool with data output is required, and it integrates simply into inspection protocols and documentation practices. The model M909.442 is a practical choice for teams seeking consistency and digital traceability. Contact Metav Werkzeuge in Emmerich for tailored advice, availability and to secure Filetta digital calipers with dependable delivery from a European precision partner Technical Data SKU: M909.442 GTIN: 4061905448843 Manufacturer: Filetta Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 60 mm Power supply: 1 × CR2025 battery Data output: USB Special features Large LCD display with on/off, mm/inch and reset buttons Depth gauge and step measurement Locking screw for repeatable readings Digital instrument (no ABS absolute system) Compliant with DIN 862 FAQ How precise is the measurement with this caliper? The Filetta digital caliper offers a resolution of 0.01 mm and is manufactured to meet DIN 862 requirements, making it suitable for standard workshop and machine‑shop quality checks. Can readings be exported directly to a PC or QC system? Yes, the caliper supports USB data output so measurements can be captured electronically and imported into inspection software or spreadsheets for documentation. What power source does the caliper use and how is the display operated? The instrument uses a single CR2025 battery and features a large LCD with on/off, mm/inch selection and a reset button for straightforward operation. Is the instrument suitable for depth and step measurements? Yes, the caliper includes an integrated depth gauge and step‑measurement capability, expanding its use beyond external and internal measurements. Which measuring range classification does this caliper belong to? With a 0–300 mm range, the caliper falls into the standard category, which is the universal workshop basis for machine and metalworking tasks. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
300mm Digital Caliper Large LCD, Removable Drive Roller, Metal Housing, DIN 862, Four-Function Measurement, Supplied in Case - Metav IndustryLine
Take advantage of precise, workshop-ready measuring: the combination of a stainless, hardened construction, a large LCD with practical control keys, and a removable drive roller ensures reproducible results and flexible handling for everyday production control. Order the digital caliper directly via Metav Werkzeuge or ask our consultants for application advice. Digital Caliper M216.127.N — 300 mm, stainless steel, removable roller (Metav IndustryLine) The Digital Caliper M216.127.N is a 300 mm workshop caliper designed for general machining and quality control, compliant with DIN 862 and equipped for digital data transfer. Large LCD with ON/OFF, ZERO, UNIT, HOLD keys Hardened stainless steel construction Removable drive roller for flexible measuring Four measurement functions for versatile use Reproducible accuracy for routine quality checks The caliper delivers a balanced mix of rigidity and reach that suits everyday machine‑shop tasks. Classified in the Standard range (0–300 mm), it offers the best compromise between measuring span and stiffness, which makes it ideal for 150/200/300 mm workshop practice. The hardened stainless steel beam and a glass slide ensure low wear and consistent guidance over repeated measurements, while the large LCD and tactile control keys simplify read‑out and setting of zero or units. These attributes reduce operator influence and support reliable process control on a production line. Robust design that stands up to workshop use Built with electronics enclosed in a metal housing, the instrument tolerates the demands of a busy bench without compromising functionality. The removable drive roller, supplied with the matching piece, allows the caliper to be used with or without the roller depending on the measuring task, adding handling flexibility for awkward geometries. The combination of sturdy materials and practical design means fewer interruptions for repairs and a lower total cost of ownership for production environments where durability matters. Streamlined data capture for traceability and inspection Equipped with a dedicated RB 5 data output, the caliper supports direct transfer of measured values into inspection software or a data logger, which accelerates documentation and reduces transcription errors. The digital interface, together with practical functions such as HOLD and unit selection, enables concise measurement routines and clear pass/fail decisions. For workshops aiming to tighten quality procedures, this connectivity simplifies logging and shortens inspection cycles while maintaining compatibility with established metrology workflows. Contact Metav Werkzeuge in Emmerich for tailored advice and supply of the Metav IndustryLine digital caliper M216.127.N — technical consultation and delivery arranged from our Emmerich location Technical data Article number: M216.127.N GTIN: 4054469159690 eClass: 21170344 Customs tariff number: 90173000 Standard: DIN 862 Key figures Measurement range: 0–300 mm Power supply: 3 V Data output: RB 5 Digital display functions: ON/OFF, ZERO, UNIT, HOLD System: digital caliper Special features Material: hardened stainless steel Scale: glass slide Electronics: metal housing Removable drive roller; matching piece included Four measurement functions: inside, outside, depth, step Large LCD display Jaw length: 60/26 mm Compliance: INOX FAQ Is the caliper suitable for workshop use on metal components? Yes. The Metav IndustryLine digital caliper M216.127.N is designed for workshop use and its hardened stainless steel construction is suitable for measurement of metal components in routine production checks. Can measured values be transferred to inspection software? Yes. The caliper provides an RB 5 data output for connection to data loggers or inspection systems, enabling direct transfer of readings from the Metav IndustryLine instrument. Which measurement tasks are covered by the instrument? The device supports four measurement functions — inside, outside, depth and step — which makes the caliper versatile for typical workshop measurements and fixture checks. What power source does the caliper use and how are controls arranged? The caliper operates from a 3 V supply and features a clear LCD with ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation of the Metav IndustryLine digital caliper. Does the instrument conform to a recognised standard? Yes. The caliper is manufactured to DIN 862, which defines the general requirements and verification for calipers used in workshop and inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Removable Roller, 4-Function Measurement, DIN 862, Stainless Hardened Scale, Case Included - Metav IndustryLine
Take advantage of a precise 300 mm digital caliper with a hardened stainless steel construction and removable roller for flexible reach; the combination of robust materials, clear digital functions and DIN 862 compliance supports reliable, repeatable measurements in everyday workshop environments. Order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Digital Caliper M217.067.N – 300 mm, hardened stainless steel with removable roller (Metav IndustryLine) The Digital Caliper M217.067.N is a workshop-grade measuring instrument designed for general machine and metalworking tasks, providing straightforward linear measurement with practical digital controls and a glass-guided scale. 300 mm measuring range, workshop standard Hardened stainless steel with glass scale Removable roller for extended reach Digital display with ON/OFF, ZERO, UNIT, HOLD Reliable measurements for everyday workshop tasks This instrument is classified as a standard caliper (measuring range up to 300 mm), which offers an optimum balance of reach and rigidity for most machine‑shop and metalworking applications. The design supports four-way measurement — external, internal, depth and step — enabling inspection of components, fixtures and assemblies without changing tools. The combination of a clear display and straightforward controls simplifies repetitive checks, reducing cycle time in routine quality control while keeping measurement workflows efficient and transparent. Durable construction reduces maintenance and drift Built from hardened stainless steel with a glass-guided scale, the caliper resists wear and maintains alignment across prolonged use, which lowers recalibration frequency and downtime. The robust jaw geometry and measured weight ensure stable handling for consistent results when measuring workpieces or gauge blocks. Compliance with DIN 862 gives a recognised benchmark for mechanical caliper design and performance, helping to integrate the instrument into established inspection processes with confidence. Practical digital functions for accurate readouts Equipped with a digital module that includes ON/OFF, ZERO, UNIT and HOLD controls, the caliper supports quick zeroing and unit switching for rapid inspection tasks. The device also offers an RB 5 data output for process documentation or connection to data collection systems where required. These features streamline data capture and traceability in production or laboratory environments and reduce transcription errors that can occur with manual recording. Efficient choice for mixed workshop environments The removable roller expands practical reach for measurements that require additional clearance without committing to a longer fixed beam, maintaining the benefits of a compact caliper when not needed. The instrument’s finish and guidance system suit regular use in industrial settings where a balance of durability and handling is essential. Selection of this Metav IndustryLine caliper supports a pragmatic approach to everyday metrology: consistent, easy to use and engineered for routine accuracy. For reliable workshop metrology, request the Metav IndustryLine Digital Caliper M217.067.N via Metav Werkzeuge and contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for specific application advice Technical data Article number: M217.067.N GTIN: 4054469159638 Norm: DIN 862 Label: Digital-Messschieber, 300 mm, Rolle abnehmbar, 3 V DIN 862 Numbers / Core technical data Measuring range: 0–300 mm Weight: 0.7 kg Battery: 3 V Jaw length: 60/26 mm Special features / Versions Material: hardened stainless steel, scale with glass slide Measurement modes: external, internal, depth, step (four-way measurement) Digital display functions: ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Removable roller for extended reach Category: caliper (Messschieber) FAQ What measurement tasks can be handled with this caliper? The instrument performs external, internal, depth and step measurements, so it covers common inspection tasks for components, fixtures and assemblies encountered in machine and metalwork. Is the caliper suitable for general workshop and inspection use? Yes. As a standard caliper with a 0–300 mm range, the Metav IndustryLine caliper meets the typical needs of machine shops and quality departments where reach, stiffness and one-handed operation are required. How is wear resistance ensured in daily use? Hardened stainless steel construction together with a glass-guided scale preserves alignment and reduces wear, supporting long-term repeatability and fewer service intervals. Can measurement data be exported for documentation? The caliper is fitted with an RB 5 data output, enabling connection to downstream data collection or SPC systems where supported. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Retractable Jaw, 0.01mm Resolution, Stainless Steel, Plastic Case - Metav IndustryLine
Benefit from precise shop‑floor measurement with a 0.01 mm digital readout, a practical 0–300 mm measuring range and a hardened stainless‑steel build that resists wear; order the instrument directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Digital Caliper M240.083.N — 300 mm, hardened stainless steel, adjustable jaw The Digital Caliper M240.083.N is a 300 mm precision caliper for machine‑shop and metalworking measurement, combining an adjustable measuring jaw with a clear digital display for routine quality control. 300 mm measurement range (0–300 mm) Digital readout with 0.01 mm resolution Hardened stainless‑steel construction Adjustable measuring jaw for versatile use ON/OFF, ZERO, UNIT and HOLD controls Accurate readings that speed up quality checks This instrument delivers a 0–300 mm measuring range suited to the standard workshop tasks found in machine and metal construction. With a 0.01 mm display resolution, the caliper provides the fine graduations expected from a digital measuring instrument; in practice, this places it in the same accuracy class as common digital calipers used for production control. The clear numeric display and straightforward controls minimise reading errors and accelerate repetitive measuring sequences, which improves throughput in inspection routines while maintaining consistency across multiple operators. Robust design for repeatable measurement Built from hardened stainless‑steel and housed in a metal casing, the tool is designed to withstand everyday use in busy workshops. The material choice increases wear resistance on contact surfaces and helps preserve the measuring faces over long service intervals. The instrument’s mass and construction give it good profile stiffness, supporting stable contact during measurements and reducing flex‑induced variation when measuring medium‑sized components. The adjustable measuring jaw (130/60 mm jaw geometry) adds practical reach for a wider range of parts without compromising rigidity. Clear display and practical data handling The digital display is equipped with ON/OFF, ZERO, UNIT and HOLD functions for flexible measuring procedures and quick unit changes between millimetres and inches. Power is supplied by a 3 V source, ensuring straightforward battery replacement and reliable operation. For data capture, the caliper provides a data output RB 5, enabling transfer of measurement values to external recording devices or SPC systems where compatible; this feature reduces transcription errors and supports traceable quality workflows on the shop floor. Purpose‑built for workshop standards and everyday use Classified within the standard caliper range, the instrument balances reach, stiffness and one‑hand operation to serve as a universal workshop instrument for dimensions on components, fixtures and assemblies. The construction and controls make it suitable for production inspection, set‑up checks and incoming goods control, where repeatable results and efficient measurement cycles are priorities. Supplied to factory standard, the caliper is aimed at professionals who require dependable, easy‑to‑operate measurement equipment without over‑specification. Contact Metav Werkzeuge for tailored advice or to secure the Metav IndustryLine digital caliper M240.083.N with 300 mm range and 0.01 mm resolution — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.083.N GTIN: 4061905038389 Brand: Metav IndustryLine Weight: 0.9 kg Material: hardened stainless‑steel with metal housing Digital display functions: ON/OFF, ZERO, UNIT, HOLD Power supply: 3 V Facts Measuring range: 0–300 mm Resolution (display): 0.01 mm Jaw length: 130/60 mm Data interface: RB 5 Type: digital caliper Special features Hardened stainless‑steel measuring faces Adjustable measuring jaw for inside/outside/stage measurements Factory standard (Werksnorm) Compact, workshop‑oriented design FAQ What measuring range and resolution does the caliper offer? The Digital Caliper M240.083.N provides a 0–300 mm measuring range with a 0.01 mm digital resolution suitable for standard workshop inspection tasks. Is the instrument suitable for routine workshop and metalworking use? Yes — the Metav IndustryLine digital caliper is constructed from hardened stainless‑steel with a metal housing, making it durable enough for everyday workshop measurement. Can measurement data be transferred to external systems? The instrument features a data output RB 5 for external recording; this facilitates connection to compatible data‑collection setups and helps to avoid manual transcription. What power source is required for operation? The caliper operates from a 3 V battery, which is user‑replaceable to keep downtime due to power loss to a minimum. Is a calibration certificate supplied with the caliper? The product is supplied to the manufacturer’s factory standard (Werksnorm); no specific ISO 17025 calibration certificate is stated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 100mm Jaws, 5mm Bore, Preset, Stainless Steel, Metal Housing, RB5 Output - Metav IndustryLine
Taking advantage of robust stainless steel construction, precise 0.01 mm display resolution and a practical preset function ensures reliable measuring across everyday workshop tasks; a bore for Ø 5 mm measuring inserts increases adaptability for fixture-mounted checks. Order the Digital-Uni-MS 300 mm x 100 mm directly via Metav Werkzeuge or ask our consultants if needed. Digital-Uni-MS 300 mm x 100 mm – Digital caliper with Ø5 mm bore and preset The Digital-Uni-MS 300 mm x 100 mm is a workshop-grade digital caliper designed for standard machine‑shop measurement tasks, offering a stainless steel housing and an integrated bore for measuring‑insert attachments. Robust INOX stainless steel housing High-resolution 0.01 mm digital readout Preset function with ON/OFF and SET controls Reliable workshop measurement with standard reach This digital caliper is built for the standard workshop range, classified under the standard (100–300 mm) size class, which offers a balanced combination of reach and rigidity for daily tasks. The instrument provides a clear 0.01 mm resolution on its digital display, enabling repeatable readings for quality control, assembly checks and setup work. The solid stainless steel housing protects the measuring slide against knocks and grime, while the overall design keeps the unit straightforward to handle during routine inspections. The presence of a preset function reduces setup time when repeatedly checking reference dimensions. Practical connectivity and power for data workflows Equipped with an RB 5 data output and a low-voltage 3 V supply, the caliper supports integration into measurement chains or manual data logging routines. The data interface facilitates transfer of measured values to compatible downstream devices, which simplifies documentation and reduces transcription error in production environments. The instrument’s simple ON/OFF and SET/PRESET keypad lets operators capture and hold reference values quickly, improving throughput on repetitive measurement tasks without sacrificing accuracy. Adaptable mounting and workshop resilience A dedicated bore of Ø 5 mm allows attachment of measuring inserts or fixtures, which is useful for repeat gauging or when the caliper is mounted in a holding device for inline checks. The INOX finish and metal housing resist workshop conditions better than lighter-plastic alternatives, contributing to long-term dimensional stability. With a jaw length of 100 mm the caliper offers firm contact for reliable external and internal measurements across typical components encountered in metalworking and general fabrication. Clear benefits for procurement and workshop managers Choosing this digital caliper brings measurable efficiency: the combination of an easy-to-read 0.01 mm display, preset capability and a robust housing reduces measurement downtime and the risk of damage during daily use. The built-in bore for measuring inserts extends the unit’s utility for fixture-based processes, while the RB 5 output supports basic data-handling workflows without complex setup. Supplied to factory standard, the instrument represents a practical, durable option for workshops seeking dependable, repeatable measurements. For fast procurement or technical clarification, contact Metav Werkzeuge for ordering and advice on how the Digital-Uni-MS 300 mm x 100 mm can be integrated into existing inspection routines. Technical Data Article number: M240.209.O GTIN: 4054469151977 Material: stainless steel housing Label: Digital-Uni-MS 300 mm x 100 mm, bore Ø=5 mm, without inserts, preset, INOX, factory standard Data output: RB 5 Power: 3 V Display type: digital with ON/OFF and SET/PRESET button Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 100 mm Weight: 1 kg ECLASS: 21170344 Special features INOX stainless steel housing Preset function and SET/PRESET controls Bore Ø 5 mm for measuring inserts RB 5 data interface Supplied to factory standard FAQ What level of accuracy can be expected from this caliper? The Digital-Uni-MS 300 mm x 100 mm features a 0.01 mm display resolution; in workshop use this provides precise, repeatable readings suitable for standard quality control and setup tasks. Can the caliper be connected to a PC or data logger? Yes, the instrument includes an RB 5 data output for straightforward connection to compatible data-capture devices and logging systems. Is the unit suitable for heavy workshop conditions? The INOX stainless steel housing and robust construction make the caliper resilient for everyday machine‑shop and fabrication environments. Does the caliper accept attachments or fixtures? A bore of Ø 5 mm is provided for mounting measuring inserts or fixturing, improving adaptability for repetitive or fixture-based measurement routines. What power source does the caliper require? The caliper operates from a 3 V source and includes simple ON/OFF and SET/PRESET controls for efficient use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 100mm Jaws, 7 Pair Measuring Inserts Preset, Stainless Steel, Plastic Case - Metav IndustryLine
The combination of fast digital readout, interchangeable preset inserts and a robust INOX metal housing delivers dependable shop-floor accuracy and repeatable results; order the Digital‑Uni‑MS 300 mm x 100 mm directly via Metav Werkzeuge or consult the technical team for application advice. Digital‑Uni‑MS 300 mm x 100 mm — Digital standard caliper with Ø5 mm insert mount (Metav IndustryLine) The Digital‑Uni‑MS 300 mm x 100 mm is a digital standard caliper for workshop and production measurements, offering a 0–300 mm measuring range and preset capability for repeatable part checks 0.01 mm digital resolution display Ø 5 mm mount for interchangeable inserts Includes 7 pairs of preset measuring inserts Sturdy INOX metal housing for workshop use Precise workshop measurement with digital clarity The caliper is designed as a standard caliper for routine machine‑shop and metalworking tasks, covering the 0–300 mm range that forms the universal workshop basis. Its digital display has a 0.01 mm resolution, which supports fast visual checks and reduces reading errors compared with a mechanical scale. The unit's ON/OFF and SET/PRESET controls allow rapid zeroing and preset functions, enabling reproducible checks on production runs. With a measured weight of approximately 1 kg and a compact jaw length, the instrument balances reach and rigidity for everyday quality control. Flexible measurement concept and process integration A dedicated Ø 5 mm mounting accepts interchangeable measuring inserts, supplied as 7 pairs of preset inserts, which simplifies changeover between different measurement tasks and reduces fixture time. The preset feature means common reference values can be stored and recalled, accelerating repetitive inspections. For data handling the caliper provides an RB 5 data output suitable for connection to SPC systems or hand‑held loggers, supporting traceable measurement collection and integration into production monitoring workflows. The metal housing in INOX finish protects the electronics and sliding surfaces against shop contaminants. Practical operation and robustness for daily use Electrical operation is provided via a 3 V supply, supporting extended run times with standard cells and simple field replacement. The instrument is delivered to workshop standard and is intended for reliable everyday use in environments that demand durability without sacrificing ease of operation. The combination of a clear digital readout, preset insert system and a robust metal housing reduces process variance and helps maintain consistent part quality across batches, making it an effective tool for assembly, jigs and corrective measurement tasks. Choose the Metav IndustryLine Digital‑Uni‑MS 300 mm x 100 mm for dependable shop‑floor measurement and contact Metav Werkzeuge in Emmerich for tailored technical advice and delivery arrangements via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.209.N GTIN: 4054469160030 Manufacturer: Metav IndustryLine Data and measurements Measuring range: 0–300 mm Resolution: 0.01 mm Weight: 1 kg Power supply: 3 V Jaw length: 100 mm Tariff code: 90173000 Special features and equipment Metal housing, INOX finish Digital display with ON/OFF and SET/PRESET buttons RB 5 data output Mounting Ø 5 mm for measuring inserts Includes 7 pairs of preset measuring inserts Supplied to factory standard (Werksnorm) Suitable for internal and external measurements FAQ Is this caliper suitable for general machine‑shop inspection tasks? The Digital‑Uni‑MS 300 mm x 100 mm from Metav IndustryLine is designed for standard workshop inspection and offers the 0–300 mm range and 0.01 mm resolution commonly used in machine‑shop quality control. Can the caliper transmit measurements to a data logger or PC? Yes — the instrument features an RB 5 data output that supports connection to SPC equipment and data loggers for process integration and documentation. What is included with the caliper for repetitive measuring tasks? The caliper is supplied with seven pairs of preset measuring inserts and a preset function, allowing quick tool changes and repeatable reference measurements. Is the housing suitable for a shop environment? The unit has a robust metal housing in an INOX finish, providing enhanced resistance to routine shop contaminants and mechanical wear. Does the caliper require special batteries or maintenance? The caliper operates on a standard 3 V supply; routine maintenance consists of keeping the sliding surfaces clean and checking the preset inserts for wear as part of normal workshop practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 60mm Jaws And Rounded Measuring Tips, Stainless Steel, Battery Operated - Metav IndustryLine
Precision of ±0.05 mm accuracy, a 300 mm measuring range and hardened stainless‑steel construction combine to deliver dependable workshop measurements and long service life; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper M240.059 — 300 mm range with round gripping tips (Metav IndustryLine) Digital caliper M240.059 offers a robust, workshop‑ready solution for internal and external measurements with extended‑reach round gripping tips for hard‑to‑access features. 300 mm measuring range Hardened stainless‑steel construction Digital display with On/Off, Zero, Unit, Hold Delivered in a transport case Reliable precision for everyday inspection The instrument delivers an industrially practical accuracy of ±0.05 mm with a standard resolution of 0.01 mm, making it suitable for routine quality control and assembly work. Classified in the Standard range (up to 300 mm), this caliper balances reach and rigidity so that measurements remain reproducible across common workshop tasks. The clear numerical readout minimises interpretation errors and reduces rework, which improves throughput and supports a consistent production rhythm. Extended reach and secure handling for varied measurements Designed with round gripping tips and a 157 mm gripping length, the device reaches recessed and awkward features while the 60 mm jaw length supports stable external measurements. The hardened stainless‑steel construction and compact 0.5 kg weight make the instrument robust yet manageable for one‑hand operation. Internal measurements are practical from about 10 mm upwards, so the caliper covers typical machine‑shop needs—from small fittings to medium assemblies—without sacrificing stiffness or control. Fast readout and reliable data flow for traceable results The digital readout features On/Off, Zero, Unit and Hold functions for quick setup and consistent workflows; the hold function aids transfer of readings away from the workpiece. Data output via RB 5 and the 3 V power supply simplify integration into inspection stations and reduce manual transcription. The transport case included ensures safe delivery and protects the tool between uses, supporting reliable long‑term performance and straightforward storage. Contact Metav Werkzeuge in Emmerich for tailored advice on the M240.059 digital caliper and guidance on integrating it into existing inspection routines Technical data Article number: M240.059 GTIN: 4054469182308 Manufacturer SKU: M240.059 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Weight: 0.5 kg Jaw length: 60 mm Gripping tips length: 157 mm Special features Material: hardened stainless steel with metal housing Digital display with On/Off, Zero, Unit, Hold Data output: RB 5 Power: 3 V battery Delivered in transport case FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–300 mm, placing it in the standard class suitable for general machine‑shop and assembly measurements. How precise is the instrument for workshop use? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.05 mm, appropriate for standard industrial quality checks and routine inspection tasks. Can internal diameters be measured with this caliper? Yes, internal measurements are supported from about 10 mm upwards; the extended gripping tips and precise digital readout facilitate access to recessed bores and cavities. Is the caliper protected for transport and storage? The tool is supplied in a transport case to protect it during shipping and when not in use, ensuring consistent performance and reducing the risk of damage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 90mm Jaw Length, Fine Adjustment, 0.01mm Resolution, Stainless Hardened Steel, Supplied In Case - Metav IndustryLine
Take advantage of 0.01 mm resolution, hardened stainless steel construction and a precise fine adjustment for reliable shop-floor measurement. Combine accuracy, robust design and straightforward data transfer to keep inspection tasks efficient. Order the caliper directly via Metav Werkzeuge or consult the Metav specialists for application advice. Digital Caliper M217.051.N — 300 mm hardened stainless steel, fine adjustment (Metav IndustryLine) The Digital Caliper M217.051.N is an electronic workshop caliper designed for general machine‑tool and metalworking measurement tasks, combining a 300 mm measuring range with fine‑adjustment control and a multifunction digital display. Digital display with HOLD and unit selection Fine adjustment for precise measurements Hardened stainless steel construction Delivered in protective transport case Gain consistent measurement confidence with fine resolution The caliper delivers a readout with 0.01 mm resolution and a factory Werksnorm 0.03 mm tolerance, which secures repeatable results in standard quality checks. The integrated fine adjustment mechanism permits micro‑aligned jaw movement, reducing overshoot on delicate parts and ensuring that each reading is taken at controlled contact force. The clear digital interface with ON/OFF, ZERO, UNIT and HOLD functions simplifies capturing transient values, while the instrument’s electronic measuring system supports routine inspection tasks without the variability of non‑digital vernier reading. This level of technical control benefits production environments where traceable, repeatable measurements limit rework and preserve throughput. Robust build and workshop suitability for standard measurements Built from fully hardened stainless steel, the caliper is intended as a Standard class instrument for the common workshop range up to 300 mm. The material choice provides corrosion resistance and long service life under regular use, while the compact jaw profile and a jaw length of 90 mm suit both external and internal measurements on typical machined parts. Delivered in a protective case for transport, the instrument is ready for immediate deployment on the shop floor or in the inspection area. This construction supports regular handling and contributes to consistent measurement practice across different workstations. Integrates with inspection workflows and minimises downtime Equipped with a 3 V power supply and a practical data output marked as RB 5, the caliper facilitates straightforward data capture for logged inspections or manual documentation. Unit conversion, zeroing and the HOLD feature reduce the number of repeated measurements, streamlining the inspection sequence. The device’s balanced weight of 0.9 kg and clear digit contrast support efficient use in routine quality control. For operations seeking to standardise measuring procedures, this instrument offers the technical basics needed to tighten tolerances and maintain a reliable production flow. Contact Metav Werkzeuge for tailored supply options of the Metav IndustryLine Digital Caliper M217.051.N and advice on calibration and delivery for your workshop requirements Technical data Article number: M217.051.N GTIN: 4054469159737 Brand: Metav IndustryLine ECLASS: 21170344 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Readability (inch): 0.0005 Weight: 0.9 kg Jaw length: 90 mm Special features Material: stainless steel, fully hardened Fine adjustment Digital display with ON/OFF, ZERO, UNIT and HOLD Power supply: 3 V Data output: RB 5 Delivered in protective transport case Factory tolerance: Werksnorm 0.03 mm Label: without tip FAQ Is the caliper suitable for general machine‑shop use? The Digital Caliper M217.051.N is designed for machine‑tool and metalworking applications within the standard measuring range up to 300 mm and is suitable for routine workshop inspection. What accuracy and resolution can be expected? Resolution is 0.01 mm with a factory tolerance specified as Werksnorm 0.03 mm, providing reliable results for standard quality control tasks. Does the instrument include a protective case for transport? Yes, the delivery of the M217.051.N includes a protective transport case to safeguard the caliper during storage and movement. Which power source does the caliper use and what display functions are provided? The unit operates on 3 V power and offers ON/OFF, ZERO, UNIT and HOLD functions for practical handling and measurement capture. Can measurement data be transferred to external systems? The caliper includes a data output listed as RB 5, enabling integration into inspection workflows that accept this output type. Is this instrument appropriate for precision bench measurement or fine‑mechanical work? The M217.051.N is a standard workshop caliper; for sub‑micrometre laboratory applications, instruments with higher resolution and specialised force control would be recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With 90mm Jaws, Stainless Hardened Steel, Fine Adjustment, 0.01mm Resolution, Protective Case - Metav IndustryLine
Take advantage of a robust combination of hardened stainless steel construction, fine-adjustment control and a clear digital readout for reliable shop-floor measurements; the 300 mm measuring range and factory tolerance of 0.03 mm ensure consistent results in routine quality checks. Order the digital caliper M217.043.N directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper M217.043.N — 300 mm range, fine-adjustment, hardened stainless steel The Digital caliper M217.043.N is a 300 mm precision instrument designed for machine‑shop and metalworking tasks, combining a clear digital display with a fine‑adjustment thumb screw for accurate positioning. Hardened stainless steel construction 300 mm measuring range, 90 mm jaw depth Fine-adjustment thumb screw for exact positioning Display resolution 0.01 mm; factory tolerance 0.03 mm Dependable accuracy for everyday workshop control The device delivers measurable repeatability through a digital readout with a standard resolution of 0.01 mm, while the manufacturer’s factory tolerance of 0.03 mm defines its operational precision band. This balance of resolution and declared tolerance makes the tool particularly well suited to general machine‑building and metalworking applications where reproducible dimensions are required without the overhead of laboratory calibration. The electronics operate from a 3 V supply and the display includes ON/OFF, ZERO, UNIT and HOLD controls to simplify comparative and incremental measurements. Simple handling and precise positioning reduce cycle time Ergonomics are addressed by a fine‑adjustment thumb screw that allows controlled traversing of the jaws for accurate setting on delicate parts. The relatively compact jaw depth of 90 mm makes internal and external measurements straightforward, and the instrument’s hardened stainless steel construction maintains profile stiffness during use. Together, these features speed up measuring routines and reduce rework by enabling one‑handed, repeatable actions suitable for production sampling and incoming inspection. Built for workshop resilience and convenient transport The measuring slide and frame are fully hardened and corrosion‑resistant, which supports long service life under shop conditions. The caliper is supplied in a transport case, protecting the instrument between shifts and during storage; the case is intended for safe transit rather than long-term climatic control. With a body weight of about 1.4 kg, the unit feels robust without being unwieldy, offering a good compromise between rigidity and manageable handling for standard bench or on‑machine measurements. Clear data handling for traceable results The instrument includes a data interface marked RB 5, enabling digitised value transfer to inspection software or logging devices where required. The digital display’s UNIT function provides quick switching between measurement units, and the HOLD key locks readings for documentation. Although the caliper is delivered to a factory standard (Werksnorm) of 0.03 mm, integration of the RB 5 output supports traceable workflows, reducing transcription errors in routine quality protocols. Discuss suitability and next steps with Metav Werkzeuge in Emmerich — contact by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to arrange supply of the M217.043.N and tailored advice for workshop integration Technical data Article number: M217.043.N GTIN: 4054469159713 Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Jaw depth: 90 mm Resolution (display): 0.01 mm Factory tolerance (Werksnorm): 0.03 mm Weight: 1.4 kg Power: 3 V Special features Material: hardened stainless steel Fine-adjustment thumb screw Digital display with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Supplied in transport case FAQ What measuring accuracy can be expected from this caliper? The digital caliper M217.043.N provides a display resolution of 0.01 mm and is supplied to a factory tolerance (Werksnorm) of 0.03 mm, which is suitable for standard workshop control and machine‑shop quality checks. Is the instrument ready for transport and workshop use? Delivery includes a transport case to protect the caliper between jobs; the case is primarily for transport and short‑term storage, ensuring the M217.043.N arrives ready for immediate use on the shop floor. How are measurements documented from the caliper? The unit features a data output labelled RB 5 for digital transfer of readings; the display also offers HOLD and UNIT functions for straightforward manual documentation when required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With Cross/Knife Jaws, Fine Adjustment, 0.01mm Resolution, Factory Standard, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 0–300 mm measuring range, robust fully hardened stainless steel construction and precise fine adjustment to maintain consistent inspection throughput; order directly via Metav Werkzeuge or consult their advisors for integration into existing quality workflows. M217.023 digital caliper — 0–300 mm, stainless hardened, fine adjustment (Metav IndustryLine) The M217.023 is a digital caliper for workshop and machine‑shop measurement tasks, offering a 0–300 mm range, a refined fine‑adjustment mechanism and workshop‑grade robustness suitable for everyday quality control. 0–300 mm measuring range Fully hardened stainless steel Fine adjustment for precise setting Digital display with mm/inch, PRESET, TOL Precision and classification tailored to the workshop The instrument is designed as a Standard class caliper with a 0–300 mm measuring range, which represents the universal basis for the machine shop: a practical compromise between reach and stiffness. The device provides a readout resolution of 0.01 mm (0.0005 in) while the factory standard specifies an accuracy of 0.04 mm, giving a reproducible reference for routine inspections and assembly checks. Constructed from stainless steel that is fully hardened, the gauge maintains jaw geometry and resisting wear over prolonged use, which reduces drift and service frequency during daily production cycles. Digital features that speed up inspection and reporting Equipped with a clear digital display, the caliper supports rapid switching between mm/inch, zeroing and a PRESET function that simplifies batch checks. Additional functions such as HOLD and TOL enable immediate capture of measured values and basic tolerance comparisons at the workbench, reducing manual transcription and the risk of errors. A data output interface (RB 5) is available for downstream data collection, which allows measured values to be recorded in inspection logs or linked to quality‑management systems, improving traceability and throughput in standardised workflows. Ergonomics, handling and transport for dependable use The instrument’s fine adjustment wheel and low‑play slide ensure controlled approach to features, promoting reproducible contact without excessive force. Jaws are supplied in a cross and knife configuration for versatile inside, outside and step measurements, with a jaw length of 90 mm that balances reach and rigidity. At approximately 1.4 kg packaged weight, the caliper remains robust yet manageable on the shop floor. Delivery includes a protective case to safeguard the tool during transport and storage; the combination of mechanical design and digital utility supports efficient inspection routines and fewer retests. For workshop‑ready precision from Metav IndustryLine, request purchasing advice or technical data from Metav Werkzeuge in Emmerich and secure expert guidance for integrating the M217.023 into production controls. Technical data Article number: M217.023 GTIN: 4054469110745 Tariff number: 90173000 Facts Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 1.4 kg Jaw length: 90 mm Factory tolerance: 0.04 mm Special features Material: stainless steel, fully hardened Fine adjustment for controlled approach Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 Cross and knife jaws for diverse measurements Delivered in protective case for transport FAQ What accuracy and resolution can be expected from this caliper? The M217.023 digital caliper has a display resolution of 0.01 mm (0.0005 in) and is supplied to a factory standard accuracy of 0.04 mm, suitable for routine workshop and quality‑control tasks. Is the instrument suitable for everyday machine‑shop use? Yes; classified in the standard 0–300 mm range, the caliper is intended for general machine‑ and metal‑working measurements where a balance of reach and stiffness is required. Which display functions help speed up inspection work? The digital display includes ON/OFF, mm/inch conversion, absolute/relative zero (0/ABS), HOLD, TOL and PRESET features, allowing quick capture, tolerance checking and batch measurement workflows with the M217.023. Does the caliper include a case for transport and storage? Delivery of the M217.023 includes a protective case suitable for transport, helping to protect the instrument between jobs and during storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With Fine Adjustment, Stainless Hardened, 0.01mm Resolution, Plastic Case - Metav IndustryLine
Take advantage of the combination of a hardened stainless-steel construction, a practical 0–300 mm measuring range and a clear digital readout at 0.01 mm for dependable workshop and inspection measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Digital Caliper M217.063.N — 300 mm, hardened stainless, 0.01 mm display A Digital caliper M217.063.N designed for everyday dimensional control in workshops and quality departments, offering a robust 0–300 mm measuring range and a factory tolerance for consistent results Hardened stainless-steel design Range 0–300 mm Digital display 0.01 mm resolution Fine-adjustment thumb screw Robust build for repeatable workshop measurement The caliper combines a fully hardened stainless-steel body with carefully finished jaws to resist wear and maintain measurement stability. The material choice reduces susceptibility to nicks and distortion during routine handling, so dimensional checks remain repeatable over long service intervals. The design delivers mechanical rigidity where it matters, translating directly into fewer re-checks and steadier process control on the shop floor. Accurate digital readout and straightforward functions Equipped with a high-contrast digital display that provides measurements to 0.01 mm (0.0005 in), the instrument offers the clarity needed for rapid decision-making in production. The display includes dedicated ON/OFF, zero, unit and hold keys to support comparative measurements, unit switching and temporary data retention. A conservative factory tolerance of 0.03 mm ensures alignment with common workshop requirements while the electronic display improves read-off speed compared with analogue scales. Practical range classified for general engineering use With a measuring span of 0–300 mm, this caliper falls into the standard class for machine and metalworking environments: a balance of reach, stiffness and single‑hand operation that makes it suitable for the typical gamut of parts, from precision brackets to housing features. The jaw geometry and a 60 mm jaw length are configured to access internal and external features commonly encountered in tooling and fixture work. Controlled handling and measured contact pressure A fine-adjustment mechanism provides controlled closing for delicate pieces and repeatable seatings on contact surfaces, reducing operator-induced variation during measurement. The smooth thumb control together with a lightweight, yet stable frame supports efficient, ergonomic use. The combination of the adjustment feature and electronic reading reduces rework and speeds up inspection loops in small-batch and serial production alike. Data connection, delivery and traceability in practice The caliper is supplied with a standardised data interface (RB 5) to integrate with measurement logging or SPC workflows where required; this accelerates transfer of values into digital records. Supplied in a protective case for safe transport and storage, the instrument arrives ready for use in routine quality checks. The construction and specifications make it a reliable tool for both workshop measurement and first-line inspection. For precise, everyday measurement choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge in Emmerich for procurement or technical clarification — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M217.063.N GTIN: 4054469159744 Brand: Metav IndustryLine Label: Digital caliper, 300 mm, 3 V INOX, factory standard 0.03 mm Facts Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Factory tolerance: 0.03 mm Power supply: 3 V Weight: 1 kg Jaw length: 60 mm Customs tariff number: 90173000 Special features Fully hardened stainless-steel body Digital display with ON/OFF, zero, unit and hold functions Fine-adjustment thumb screw for controlled closing Data output: RB 5 Supplied in a protective case FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–300 mm, making it suitable for standard workshop and machine-tool measurements. How fine is the readout and how is it shown? The instrument provides a 0.01 mm resolution on a digital display, with the alternative inch reading of 0.0005 in accessible via the unit key. Is the caliper suitable for regular workshop use? Yes. The hardened stainless-steel construction and controlled fine-adjustment make the caliper robust enough for everyday use in production and inspection. Does the caliper offer data output for process documentation? The caliper features an RB 5 data output interface to facilitate integration into data-collection or SPC systems. Does the tool include any protective packaging for transport? The caliper is supplied in a protective case to ensure safe transport and storage between jobs. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With Five Pairs Of Measuring Inserts And 30mm Setting Ring, Stainless Hardened, Case - Metav IndustryLine
Combine reliable 0.01 mm resolution, a 300 mm measuring range and hardened stainless‑steel construction for repeatable shop‑floor accuracy; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital‑Uni Caliper 300 mm — Digital caliper with 0.01 mm readability and hardened stainless steel (Metav IndustryLine) The Digital‑Uni Caliper 300 mm is a compact digital caliper designed for workshop and inspection tasks, enabling fast internal, external, depth and step measurements across a typical machine‑shop measuring range. Digital display with ON/OFF and SET/PRESET 0.01 mm readability for precise measurements Includes five pairs of measuring inserts Hardened stainless steel construction Precise measurement where it matters The caliper delivers 0.01 mm readability via a clear digital display, which supports ON/OFF and SET/PRESET functions for quick reference and repeatable zeroing. With a measuring range up to 300 mm, this model falls into the standard caliper class used across machine shops and metalworking for a balance of reach and rigidity. The numeric resolution and compact slider reduce reading errors compared with non‑digital vernier units, making it suitable for routine quality checks and faster incoming‑inspection workflows. Built for dependable shop performance Constructed from hardened stainless steel, the device is dimensionally stable and resistant to corrosion, ensuring measurement stability over time. The set includes a 30 mm setting ring and a selection of measuring inserts that extend the instrument’s versatility: groove inserts (flat and round), an insert for external checks, an insert for M2.5 thread measurements and a dedicated insert for pipe‑wall or bore diameter assessment. Delivered in a transport case, the caliper and accessories are protected during shipment and storage, which helps maintain calibration and reduces handling damage. Practical benefits for process control and traceability The instrument supports common shop procedures: rapid presetting speeds up batch checks, while the clear readout reduces transcription mistakes. The package contents allow precise measurement of profiles, bores and threads without frequent tool changes, improving throughput and lowering the risk of rework. For quality documentation, the stable measuring behaviour of the unit assists in consistent pass/fail decisions on the production line and in goods receipt inspections. Choose the Metav IndustryLine digital caliper for reliable workshop measurements — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich to your bench Technical Data Article number: M240.281 GTIN: 4061905053795 Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Readability: 0.01 mm Weight: 1.25 kg Display: Digital with ON/OFF and SET/PRESET Special features Material: hardened stainless steel Included accessories: 1x caliper, 1x 30 mm setting ring, measuring inserts for grooves (flat and round), insert for external measurement, insert for M2.5 thread, insert for pipe‑wall/bore measurement Suitable for internal, external, pipe‑wall and bore diameter measurements Delivered in a transport case FAQ Is the caliper suitable for internal and external measurements? Yes. The Digital‑Uni Caliper 300 mm is specified for internal and external measurements and includes dedicated inserts for groove, bore and external checks to extend measurement capability. What resolution and repeatability can be expected? The instrument provides 0.01 mm readability on its digital display, appropriate for standard workshop quality control across the 0–300 mm range. Are the additional measuring inserts included? Yes. The set contains a selection of measuring inserts and a 30 mm setting ring as listed in the product contents to support varied measurement tasks. Is the caliper corrosion resistant and durable for shop use? The caliper is made from hardened stainless steel, offering enhanced resistance to wear and corrosion for consistent use in workshop environments. Can the display be preset to a reference value for batch inspection? Yes. The digital display includes SET/PRESET functionality and an ON/OFF control for quick zeroing and repeatable reference settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper with Hardened Stainless Steel Cross-Point Jaws, Fine Adjustment, 0.01mm Resolution, Supplied in Case - Metav IndustryLine
Take advantage of a precise 0–300 mm measurement range and 0.01 mm resolution combined with a hardened stainless steel construction for reliable workshop control and repeatable quality checks; order the measuring device directly via Metav Werkzeuge or consult their specialists for integration into existing inspection routines. Digital caliper M217.033 — 300 mm electronic measuring instrument with fine adjustment The Digital caliper M217.033 is a 300 mm precision measuring instrument for workshop and quality-control use, equipped with a fine-adjustment slider and a clear digital display for mm/inch measurement. 300 mm measurement range Hardened stainless steel construction Fine-adjustment slider for exact positioning Digital display with mm/inch and preset functions Precision and workshop suitability that balances reach and rigidity The electronic caliper is designed in the Standard size class (maximum 100–300 mm) to provide the best compromise between measuring reach and profile stiffness for everyday machine‑shop tasks. With a resolution of 0.01 mm and a factory standard accuracy of 0.04 mm, the instrument gives a measurable increase in process reliability for routine dimensional checks. The 300 mm measuring span covers common parts and assemblies while the short jaw profile keeps the instrument torsion‑resistant, which reduces operator‑induced error and improves reproducibility. Practical electronics and functions for faster quality checks The integrated display supports quick switching between mm/inch, zeroing and presetting, plus a HOLD function and tolerance aids that speed up inspection loops and minimise transcription errors. These functions turn a basic gauge into a compact inspection tool, so measurement data is easier to interpret and decisions can be taken faster on the shop floor. The simple controls and readable digits make the device effective for both bench work and in‑process checks where clear pass/fail indication and repeatable zeroing are essential. Robust build and refined handling for everyday use Manufactured from fully hardened stainless steel, the caliper resists workshop wear and maintains jaw alignment over prolonged use. The fine‑adjustment slider enables controlled approach to the measuring faces for precise seating without overshoot, which is particularly useful when measuring small features or thin walls. A 90 mm jaw length provides practical contact area for standard external and internal measurements while keeping the instrument compact enough for handheld operation and toolbox storage. Trusted partner for precision: Metav’s quality filter Sourcing through Metav means access to a supplier that positions precision as a democratic offering for workshops and industry alike. Metav’s experience and stock depth support reliable supply and technical guidance so the instrument integrates into existing workflows without surprises. The combination of a hardened construction, dependable electronics and Metav’s aftersales competence supports efficient quality assurance routines in small and medium production environments. Speak to Metav Werkzeuge for technical advice and to secure the M217.033 digital caliper with 300 mm range — email info@metav-werkzeuge.com or call +49 2822 7131930 from Emmerich Technical data SKU: M217.033 GTIN: 4054469110776 Description: Digital caliper, stainless, fine adjustment Facts Measurement range: 0–300 mm Resolution: 0.01 mm Factory standard accuracy: 0.04 mm Jaw length: 90 mm Data output: RB 5 Special features Fully hardened stainless steel Digital display with mm/inch, zero, HOLD, TOL, PRESET Fine‑adjustment slider Werksnorm standard FAQ Is the caliper suitable for everyday workshop measurement tasks? The M217.033 digital caliper is designed for standard workshop use with a 0–300 mm range and resolution of 0.01 mm, making it suitable for machine‑shop and metalworking quality checks. What display functions are available on the electronic caliper? The instrument features an electronic display with mm/inch switching, zero/preset, HOLD, and TOL functions for streamlined inspection routines. How does the fine‑adjustment slider help in practice? Fine adjustment enables controlled approach to the measuring faces, reducing overshoot and improving repeatability when measuring small or delicate features with the caliper. What material and hardness properties ensure long service life? Construction in fully hardened stainless steel ensures resistance to wear and maintains jaw alignment for prolonged, reliable use in workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With Large LCD, mm/inch, USB Data Output, ABS Frame, CR2025 Battery - Filetta
Take advantage of a 0–300 mm measuring range, 0.01 mm resolution and USB data output for reliable workshop measurement and smooth documentation; the large LCD and ABS absolute system support fast mm/inch switching and repeatable readings. Order the Filetta caliper via Metav Werkzeuge or contact our consultants for tailored advice. Digital Caliper M909.445 — 0–300 mm, 0.01 mm resolution, USB (Filetta) The Digital Caliper M909.445 is a 0–300 mm digital caliper designed for workshop measuring and quality control, combining an ABS absolute encoder with a large LCD and USB data output for efficient measurement transfer 0.01 mm resolution for reliable readings USB data output for digital logging Large LCD display with mm/inch readout Locking screw and depth gauge included Precision and repeatability for everyday quality checks This standard-range caliper, classified for the workshop class with a measuring range up to 300 mm, delivers industrially relevant accuracy thanks to a 0.01 mm display resolution and conformity with DIN 862. The built-in ABS absolute measuring system guarantees immediate reference after switching on, eliminating cumulative zero errors commonly encountered with incremental sensors. A secure locking screw keeps the jaws fixed during transfer, which reduces handling error and increases repeatability when carrying measurements to inspection sheets or CMM inputs. Effortless data capture and traceable measurement records Engineered for straightforward documentation, the instrument features a clear large LCD with mm/inch selection and a reset function, plus USB data output for direct logging into spreadsheets or inspection software. The compact electronics are powered by a CR2025 cell and an on/off switch preserves battery life during intermittent use. This combination of readable display, simple controls and digital export supports faster traceability and reduces transcription errors in production control and incoming inspection. Robust handling and practical workshop ergonomics The slide and jaws are optimised for daily use: a 60 mm jaw length offers tactile control for both fine and general measurements, while the integrated depth gauge extends functionality to basic depth checks. The construction balances stiffness and handling, so one-handed operation remains practicable across typical workshop tasks. Compliance with workshop norms and the inclusion of a locking mechanism make this instrument a reliable choice for machinists and quality staff who need consistent, transferable results without complex setup. For precise measuring with straightforward data export, choose the Filetta caliper and order through Metav Werkzeuge — for product queries or technical clarification contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M909.445 GTIN: 4061905448874 eCl@ss: 21170344 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 60 mm Special features Digital display: Large LCD with mm/inch and reset button Data output: USB Power: 1 × CR2025 battery Standard: DIN 862 Absolute measuring system: ABS Locking screw included Depth gauge integrated FAQ What measurement accuracy can be expected from this caliper? The Filetta digital caliper M909.445 has a display resolution of 0.01 mm; for the 0–300 mm range the practical error band aligns with the DIN 862 expectations for standard digital calipers (commonly ±0.03 mm), making it suitable for routine workshop and inspection tasks. Can measurement data be transferred to a PC or data logger? Yes. The caliper provides a USB data output that enables direct transfer of readings into spreadsheets or inspection software for documentation and statistical process control. Which measurement types are supported by the tool? The instrument covers external and internal dimension checks and includes an integrated depth gauge for depth measurements, providing the basic measurement functions required in general workshop inspection. Does the caliper meet recognised standards? The M909.445 is specified to meet DIN 862, which defines the requirements for vernier and digital calipers used in machining and quality inspection. What power source does the caliper use and how is power managed? The unit is powered by a single CR2025 battery and features an on/off switch to conserve energy between uses. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
300mm Digital Caliper With Removable Drive Roller, Preset Buttons, Three-Point Measurement, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of precise workshop measurement with the preset digital function, a removable drive roller for flexible handling and a hardened stainless steel construction that follows DIN 862 — order the Digital Caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper M216.127.P — 300 mm preset with removable roller (Metav IndustryLine) the Digital Caliper M216.127.P is a 300 mm workshop caliper with preset buttons and a removable drive roller, designed for reliable shop‑floor measurement and quality control 300 mm measurement range (standard workshop) Removable drive roller for flexible use Hardened stainless steel frame with glass scale Preset function with SET/PRESET and ON/OFF Reliable accuracy for everyday quality control The caliper offers a 300 mm range that places it in the standard class for machine and metalworking shops, providing the best balance between reach and stiffness for common tasks. As a digital instrument, it operates on a 3 V power system and uses a conventional display configuration with ON/OFF and SET/PRESET keys, enabling quick zeroing and presetting for repetitive checks. Combined with the hardened stainless steel frame and a glass scale, this design reduces wear and keeps measurement stability over repeated use, so routine inspection and assembly work proceed with fewer interruptions. Flexible measuring modes for complete part inspection Equipped for 4‑fold measurement, the caliper supports inside, outside, depth and step measurements, which makes it suitable for a wide range of inspection tasks without changing tools. The included removable drive roller provides an alternative measuring interface for cylindrical and stepped parts, enabling smoother travel on long runs and easier handling when measuring curved surfaces. The preset capability simplifies batch checks: set the reference once and record repeated results consistently, which reduces operator influence and streamlines process control. Robust construction and secure electronics The combination of a hardened stainless steel body, a glass scale and electronics housed in a metal casing protects the instrument in demanding workshop environments. These materials balance durability with dimensional stability; the metal electronic housing shields the sensor from mechanical damage and helps dissipate heat, while the glass scale maintains readable graduation lines. The caliper’s mechanical design — including specified jaw lengths — supports reproducible contact geometry and long service life under normal industrial use. Practical interfacing and documentation The instrument provides a data output RB 5, allowing connection to data collection systems where required. For routine documentation and integration into inspection workflows this output enables fast transfer of measured values into SPC or reporting software. The preset and digital readout speed up setup and reduce transcription errors, supporting a leaner inspection routine and improving traceability in production reporting. Discuss application needs with Metav Werkzeuge GmbH in Emmerich or request product matching for specific assemblies via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M216.127.P GTIN: 4054469167909 Label: Digital caliper, 300 mm, preset, removable roller, 3 V with preset buttons Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Weight: 0.7 kg Measuring jaw lengths: 60 mm / 26 mm Power supply: 3 V Customs tariff number: 90173000 Special features Hardened stainless steel body Glass scale Electronics in metal housing Preset function with SET/PRESET and ON/OFF Removable drive roller included Data output: RB 5 Conforms to DIN 862 4‑fold measurement capability (inside, outside, depth, step) FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–300 mm and is classified as a standard workshop caliper suitable for most machine‑shop tasks. Does the caliper support inside and depth measurements? Yes. The instrument offers 4‑fold measurement: inside, outside, depth and step measurements are all supported by the caliper’s design. How does the preset function improve inspection work? The preset (SET/PRESET) keys allow a reference value to be stored so repeated checks are faster and more consistent; the preset function on the M216.127.P reduces setup time and operator variation. Is the drive roller included and removable? A removable drive roller is supplied as part of the delivery and can be fitted or removed depending on the measuring task to improve handling of cylindrical or stepped surfaces. What materials protect the measuring components? The caliper uses a hardened stainless steel body and a glass scale, with the electronics mounted in a metal housing to enhance robustness and dimensional stability. Can measured values be exported to a PC or data system? Yes. The caliper provides a data output labelled RB 5 for connection to data acquisition systems or manual recording equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Depth Gauge Inductive Sensor IP67, 0.01mm Resolution, Stainless Hardened, Supplied in Case - Metav IndustryLine
The combination of robust IP67 protection, an inductive measuring system and a 0.01 mm display resolution delivers dependable depth measurement for everyday workshop control; benefit from fast, repeatable readings and corrosion‑resistant construction. Order via Metav Werkzeuge or contact our consultants for specification advice and prompt supply. Digital depth gauge M218.122.D — 0–300 mm range, IP67 protection Digital depth gauge M218.122.D provides precise depth measurement for machine shops and quality control, designed as a rugged industrial instrument for standard workshop tasks IP67 protection against dust and water immersion Inductive measuring system for long service life 0.01 mm display resolution for fine control Hardened stainless steel construction Complies with DIN 862 for workshop metrology Precise readings that fit the workshop routine The instrument is built around an inductive measuring system and a standard 0–300 mm range, classifying it as a workshop‑standard depth gauge that balances reach and stiffness. With a display resolution of 0.01 mm, the device supports repeatable checks in production and incoming‑goods inspection; the numeric step size is explained on the display and allows operators to distinguish between tolerances comfortably. Compliance with DIN 862 ensures the unit meets recognised dimensional metrology requirements, so results integrate easily into existing QC procedures. Durable construction for harsh working environments A hardened stainless steel body and an IP67 rating protect the instrument from coolant, chips and dust, reducing measurement downtime and prolonging service life. The digital readout runs from a replaceable 3 V CR 2032 battery and the control panel offers MODE, INC, HOLD and 0/ON keys for straightforward handling during repetitive tasks. At approximately 0.6 kg, the gauge is substantial enough to feel stable while remaining portable for bench or on‑machine checks. Simple operation, tailored to industrial use The depth gauge is supplied without data output, which suits inspection stations that record values manually or with stand‑alone documentation procedures. The inductive sensor reduces sliding contact wear compared with mechanical racks, maintaining accuracy over prolonged use. As a Standard class instrument, it is particularly well suited to general metalworking, fixture checks and routine quality control where robust, quick depth measurements are required without the complexity of automatic data transmission. Contact Metav Werkzeuge for specialist advice on integrating the M218.122.D into your workshop workflow and to arrange supply from our Emmerich warehouse Technical data Article number: M218.122.D GTIN: 4054469182957 Label: Digital-Tiefenmaß 300 x 150 mm, IP67 Ohne Datenausgang Brand: Metav IndustryLine Facts Measurement range: 0–300 mm Resolution: 0.01 mm Protection rating: IP67 Weight: 0.6 kg Battery: 3 V CR 2032 Bridge: 150 mm Measuring system: inductive Compliance: DIN 862 Special features Hardened stainless steel construction Digital display with MODE, INC, HOLD, 0/ON buttons No data output (without interface) Robust sensor technology for extended service life FAQ How accurate is the measurement on this digital depth gauge? The device provides a display resolution of 0.01 mm and conforms to DIN 862, offering accuracy and repeatability suitable for routine workshop inspection with clear numeric feedback. Is the gauge suitable for use on a busy shop floor? Yes. The IP67 rating and hardened stainless steel construction make the unit resistant to dust and coolant exposure, so it is appropriate for machine‑shop environments. Can measurement data be exported to a computer or SPC system? This model is supplied without data output, so readings are intended for manual recording or integration into non‑automated inspection processes. What battery does the instrument use and is it easy to replace? The gauge uses a standard 3 V CR 2032 coin cell, which is easily replaced in the field to minimise downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Einbaumessschieber senkrecht, 0,01mm, DIN 862 - Metav IndustryLine
Das 1989 gegründete Vertriebsunternehmen von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste für den Einbaumessschieber senkrecht Messbereich: bis 300mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 300mm für gängige Werkstücke Der Messbereich bis 300mm deckt die gängigsten Bauteilgrößen im Alltag zuverlässig ab. Von Rohteilen bis zu fertigen Komponenten bleibt genügend Spielraum für wiederkehrende Aufgaben. Die Handhabung fügt sich flüssig in Arbeitsabläufe ein und sorgt für zügige Kontrollen zwischendurch. Im allgemeinen Maschinen- und Metallbau liefert dieser Bereich klare, reproduzierbare Ergebnisse. So entsteht Tempo ohne Hektik und Präzision ohne Umwege. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Ausführung DIN 862 Unser Messwerkzeug basiert vollständig auf den Richtlinien der DIN 862. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Expertenhinweis: Was ist bei der Reinigung der Messschenkel wichtig? Ein Fussel- oder Ölfilm von wenigen µm reicht, um Zehntel mm zu verfälschen. Deshalb vor jeder Messung die Messflächen mit einem fusselfreien Tuch abwischen. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Produkteigenschaften für den digitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.456 Zahlen: Messbereich: 0-300mm Gewicht: 0,35kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,04mm Länge: 430mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv senkrecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Messschieber kaufen geachtet werden sollte: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Ein Messschieber mit sorgfältig kalibrierter Messkraft ist speziell für die Qualitätssicherung und die Nutzung in Laboren von Vorteil. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern.
300mm Digital Outside Caliper Flat Tips 0.01mm Resolution, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the 300 mm measuring range, 0.01 mm resolution and hardened stainless construction for consistent shop‑floor results; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital External Caliper M240.052.N – 300 mm range, flat jaws, stainless hardened steel (Metav IndustryLine) The Digital External Caliper M240.052.N is a workshop‑grade digital caliper designed for precise external, internal and depth measurements in standard machine‑shop and inspection tasks. 300 mm measuring range 0.01 mm digital resolution Hardened stainless steel construction Flat 100 mm jaws for groove measurement Precision that fits everyday workshop needs The caliper is configured to the Standard measuring class with a 0–300 mm range, offering an ideal balance between reach and rigidity for general engineering and metalworking. With a display resolution of 0.01 mm, the instrument provides clear numeric feedback suitable for quality control and setup work; in the context of DIN 862, digital calipers in this class typically operate with an expected error band up to ±0.03 mm across the full range, which helps to set realistic tolerances for routine checks. The presented measurement system reduces interpretation time and speeds decision‑making on the bench, improving throughput without sacrificing traceability. Built for repeatability and robust handling Constructed from stainless hardened steel, the caliper resists wear and preserves jaw alignment under frequent use, supporting repeatable measurements across shifts. The flat jaws with a 100 mm length are optimised for groove and slot verification, enabling stable contact on narrow profiles while the overall instrument mass (approx. 0.8 kg) contributes to steadiness during manual measurement. Ergonomic control via dedicated keys keeps routine tasks efficient: the unit includes ON/OFF, ZERO, UNIT and HOLD functions for quick reference capture and mode switching, which is particularly helpful when inspecting batches or transferring values to process documentation. Data output, standards and workshop integration The device provides a RB 5 data output option for connection to inspection stations or data loggers, simplifying the digital transfer of readings into quality management systems and reducing transcription errors. Power is supplied via a 3 V cell, ensuring long operational life between replacements. The caliper is supplied to factory standard (Werksnorm), delivering a dependable baseline for dimensional control in production environments. For customers seeking integration support or bespoke advice on using the interface in an inspection workflow, Metav IndustryLine offers technical guidance and product matching to existing measurement systems. Contact Metav Werkzeuge for tailored advice and secure the Metav IndustryLine digital caliper M240.052.N with 300 mm range for reliable, repeatable measurement results on the shop floor Technical data Article number: M240.052.N GTIN: 4054469160337 eClass: 21170344 Tariff code: 90173000 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 100 mm Weight: 0.8 kg Special features Material: stainless hardened steel Tip style: flat jaws Display: digital with ON/OFF, ZERO, UNIT, HOLD Power: 3 V supply Data output: RB 5 Supplied to factory standard (Werksnorm) FAQ How accurate is the caliper across its range? The Digital External Caliper M240.052.N has a display resolution of 0.01 mm; as a standard digital caliper with a 0–300 mm range, typical error limits for instruments in this class are in the order of ±0.03 mm, providing suitable accuracy for general machining and inspection tasks. Can the caliper measure grooves and narrow slots? Yes, the flat 100 mm jaws are designed to access grooves and slots, enabling stable contact for reliable groove and external measurements with acceptable repeatability. Is data transfer possible to a PC or measurement system? The caliper offers an RB 5 data output option that supports connection to inspection stations or data loggers, facilitating digital capture of readings and integration into quality workflows. What material is the caliper made from and how does that help? Constructed from hardened stainless steel, the instrument resists wear and maintains jaw alignment under frequent use, which helps to preserve measurement accuracy and prolong service life. Does the caliper come ready for inspection work on delivery? The tool is supplied to factory standard (Werksnorm), giving a dependable baseline for measurements; for traceable laboratory calibration certificates, please enquire about additional calibration services. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Outside Caliper With 100mm Depth Rods, Stainless Steel, 0.01mm Resolution, IP54, Plastic Case - Metav IndustryLine
Take advantage of the combination of high-resolution digital readout, a 0–300 mm measuring range and a hardened stainless-steel construction for reliable workshop measurement. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital external caliper M240.062.N — 0–300 mm, probe pins (Metav IndustryLine) Digital external caliper M240.062.N is a 0–300 mm precision caliper designed for robust external and groove measurements in general machine and metal workshops High-resolution 0.01 mm digital display Hardened stainless steel construction Integrated probe pins for groove measurement Supplied in a protective transport case Precision and repeatability for everyday workshop control The 0–300 mm measuring range places this instrument in the Standard class, offering the best balance of reach and rigidity for routine machine‑shop and maintenance tasks. The digital readout with a resolution of 0.01 mm (and 0.0005 in display step) provides clear numeric results suitable for production checks and quality control. The instrument is driven by a 3 V power system and features ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation. The combination of a precise display and solid construction reduces interpretation time and increases throughput on the shop floor. Robust design that supports repeatable handling A hardened stainless steel frame with a metal housing ensures corrosion resistance and long service life under workshop conditions. The extended jaw length of 100 mm allows access to deeper external profiles and grooves; the included probe pins are specifically arranged for groove and slot measurement, improving contact reliability in those applications. At 1.05 kg overall mass the tool feels substantial without being cumbersome, and the supplied protective case keeps the instrument safe during transport between workstations or to inspection points. Data-ready features and practical integration With a dedicated RB 5 data output format, the caliper can be integrated into data-collection routines or linked to inspection software for digital logging of measurement series. The instrument’s factory standard configuration supports straightforward use in production environments where quick transfer of results is essential. Ergonomic controls and a readable display cut down cycle time, while the durable build reduces downtime from tool replacement — a practical efficiency gain for small and medium workshops. Contact Metav Werkzeuge in Emmerich to discuss how the M240.062.N can be integrated into your inspection routines, request delivery in a transport case or obtain tailored technical advice from our specialists Technical Data Article number: M240.062.N GTIN: 4054469160351 Manufacturer: Metav IndustryLine Data Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 1.05 kg Jaw length: 100 mm Power: 3 V Customs tariff number: 90173000 eCl@ss: 21170344 Special features Hardened stainless steel, metal housing Integrated probe pins for groove measurement Digital display with ON/OFF, ZERO, UNIT, HOLD keys Data output: RB 5 Supplied in a protective transport case Factory standard configuration FAQ What measurement tasks is this caliper best suited to? The M240.062.N digital external caliper from Metav IndustryLine is ideal for general machine‑shop external and groove measurements within the 0–300 mm Standard range, where a balance of reach and rigidity is required. What accuracy and resolution can be expected? The instrument provides a resolution of 0.01 mm (0.0005 in) suitable for standard workshop quality control; results are displayed on the digital readout for quick interpretation. Does the caliper support digital data transfer? Yes — the caliper offers an RB 5 data output for connection to data‑acquisition systems or inspection software to capture measurement series. Are groove and slot measurements possible with this tool? Groove measurement is supported via the integrated probe pins; the M240.062.N is configured specifically to improve contact in slots and narrow profiles. How is the caliper supplied and protected during transport? The caliper is supplied in a protective transport case to prevent damage during handling and transit Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Precision Caliper 0.01mm Resolution, IP54, ISO 17025 Calibrated - Microtech Metrology
Benefit from laboratory-grade traceability together with workshop-ready robustness: ISO 17025 calibration and USB data output ensure reliable quality control and seamless data capture; the IP54-rated construction keeps the tool operable in typical production environments. Order the Microtech Metrology digital caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper by Microtech Metrology — 0–300 mm range, USB output, ISO 17025 calibration Digital Caliper from Microtech Metrology for standard workshop and laboratory measurement tasks, combining traceable calibration with robust ingress protection and clear digital readout Factory-calibrated to ISO 17025 USB data output for traceable logs IP54 protection against dust and splash 0–300 mm standard workshop range 9 mm high-contrast digital display Laboratory traceability that supports audit-ready measurement The instrument is delivered fully calibrated to ISO 17025, including a calibration certificate, which provides direct traceability for quality assurance and audit processes. That formal certificate minimises uncertainty in inspection records and supports compliance with internal quality systems. With this level of documented accuracy, routine checks and incoming inspection tasks can be standardised, reducing rework and strengthening supplier confidence in measurement results. Robust performance where workshop conditions matter Designed for everyday use, the caliper combines a 0–300 mm measuring range with an IP54 rating to resist dust ingress and splashed liquids, making it suitable for shop-floor measurement as well as bench inspection. The device achieves an accuracy of ±0.03 mm and a display resolution of 0.01 mm, which meets common industrial tolerances while remaining straightforward to operate. Classified in the standard range for mechanical and metalworking tasks, it balances reach and stiffness for reliable one-hand operation. Direct data capture to streamline quality workflows Equipped with a USB data output and a high‑contrast 9 mm digital display, the instrument simplifies documentation and reduces transcription errors during batch inspection. Measurements can be exported directly to data-collection software or spreadsheets, accelerating reporting and enabling statistical process control. This connectivity is particularly useful where traceable measurement logs are required for production records or process qualification. Ergonomic design and practical features for consistent results The caliper’s jaw geometry and a jaw length of 43 mm support both external and internal measurements with comfortable handling. The electronic slide provides smooth, repeatable readings without additional measuring force, which helps protect delicate surfaces. Delivered ready for immediate use with its calibration certificate, the tool is a pragmatic choice for workshops and laboratories seeking dependable, measurable results with minimal setup. For ISO 17025-traceable measurement and practical integration advice, contact Metav Werkzeuge in Emmerich—our specialists will advise on suitability for specific applications and provide the calibration documentation required for quality systems Technical data SKU: 141430300 GTIN: 4061905459443 Manufacturer: Microtech Metrology ECLASS: 21170344 Calibration: ISO 17025 certificate included Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 9 mm Jaw length: 43 mm IP rating: IP54 Special features USB data output Digital display Delivered calibrated to ISO 17025 No measuring force Category: Standard (100–300 mm range) FAQ Is the instrument supplied with a calibration certificate? Yes. The Microtech Metrology digital caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate required for traceability. Can measurement values be transferred directly to a PC? Yes. The caliper has a USB data output that enables direct transfer of measurement data to data-collection software or spreadsheets. What accuracy and resolution can be expected across the measuring range? The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm across the 0–300 mm range. Is this caliper suitable for shop-floor use? Yes. With an IP54 rating and a robust build, the caliper is suitable for workshop environments while providing laboratory-grade calibration. Which SKU identifies this model for ordering? Order reference: SKU 141430300, GTIN 4061905459443 for the Microtech Metrology digital caliper. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper 90mm Jaw, Inductive System, Fine Adjustment, IP65, Supplied In Case - Metav IndustryLine
Combine robust IP65 protection with an inductive measuring system and a fine-adjustment slider for reliable, repeatable shop-floor measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for tailored advice. M217.123 Digital workshop caliper — 300 mm, IP65, Metav IndustryLine A M217.123 digital workshop caliper designed for accurate component measurement in general metalworking and machine-shop environments. IP65 protection for use in workshops Inductive measuring system for stable readings Fine-adjustment slider for controlled positioning Supplied in protective case for safe transport Consistent shop-floor accuracy for everyday measurement tasks The instrument delivers a 0–300 mm measuring range classified as Standard, offering the ideal balance between reach and rigidity for most machine-shop applications. With a display resolution of 0.01 mm (0.0005 in) and generation accuracy indicated on the label, the device supports precise external, internal and depth checks where repeatability counts. The inductive measuring system reduces mechanical wear on the scale and contributes to stable numerical output, helping maintain a consistent inspection routine and reducing rework. Built to withstand workshop conditions and handling Constructed from stainless steel, fully hardened, the caliper is suited to daily use in harsher environments. The IP65 rating means protection against dust ingress and low-pressure water jets, which preserves measurement integrity on the shop floor. Delivered in a protective case for transport, the instrument is ready for mobile use between machines or workstations. This combination of robust materials and ingress protection reduces downtime and supports a reliable production pace. Practical controls and data flow for efficient workflows The digital display provides mm/inch readout plus HOLD, SET, ON/OFF, 0/INC and DATA keys, enabling quick toggling and stable capture of values. A fine-adjustment slider allows slow, controlled closing of the jaws for reproducible positioning on small parts, increasing first-pass yield in quality checks. Weight and handling are optimised for single-handed use at approximately 0.9 kg. The caliper offers a RB 6 data output interface for integration into downstream data logging or inspection systems, supporting documentation and traceability in production processes. Choose Metav IndustryLine when durable shop-floor performance and reliable data capture are required — contact Metav Werkzeuge to discuss integration and secure this workshop caliper for your quality routines. Technical data Article number: M217.123 GTIN: 4054469146874 Manufacturer: Metav IndustryLine Core data Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.9 kg Jaw length: 90 mm Protection rating: IP65 Special features Material: stainless steel, fully hardened Fine-adjustment slider for controlled positioning Digital display with mm/inch, HOLD, SET, ON/OFF, 0/INC and DATA buttons Data output: RB 6 Inductive measuring system for reduced wear and stable readings Supplied in protective case for transport FAQ Is the caliper suitable for daily use in a workshop environment? Yes. The M217.123 digital workshop caliper from Metav IndustryLine is designed for shop-floor conditions, combining stainless steel construction with an IP65 rating for dust and water resistance. What level of accuracy and resolution does the instrument provide? The instrument offers a display resolution of 0.01 mm (0.0005 in) and is specified for precise routine measurements across the 0–300 mm range. Can measurement data be exported to a PC or data logger? Yes. The caliper includes a RB 6 data output for connection to compatible data-acquisition systems to support documentation and process control. Does the device include features for delicate positioning on small parts? A built-in fine-adjustment slider provides controlled jaw movement, improving reproducibility when measuring small or fragile components. What makes this caliper a good fit for machine shops compared with a basic model? Besides the inductive measuring system that reduces mechanical wear, the combination of IP65 protection, hardened stainless-steel construction and practical data functions positions the instrument for durable, reliable use in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Precision Caliper E‑Ink 2.13" Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high measurement fidelity, effortless data transfer and full ISO 17025 traceability for consistent quality control. Order the Precision Caliper directly via Metav Werkzeuge or consult their specialists for application advice. Precision Caliper 141093030F — E‑Ink 2.13" display, Wireless + USB Precision Caliper 141093030F is a digital measuring instrument for workshop and laboratory use, offering a 300 mm measuring range and rugged, workflow-friendly integration. E‑Ink 2.13" display for clear readings Wireless and USB data output for integration Calibrated to ISO 17025 with certificate included Dual measuring force 8N external / 4N internal High-accuracy measurement that fits the workshop The caliper belongs to the Standard (0–300 mm) class, which balances reach and stiffness for general machining and metalworking. With a specified accuracy of 0.015 mm and a readout increment of 0.005 mm, the instrument delivers reproducible results suitable for incoming inspection and assembly tasks. The combination of fine resolution and a repeatable contact regime reduces rework and supports process control; the dual measuring force (8N external / 4N internal) helps maintain consistent contact pressure for external and internal dimensions. Fast data capture and integration for efficient processes Equipped with both Wireless and USB data outputs, the caliper simplifies data collection and traceability in digital production environments. The E‑Ink display provides excellent legibility under workshop lighting while keeping power consumption low, which extends time between battery changes and reduces downtime. Seamless transfer of measured values into inspection software or spreadsheets supports quality documentation and speeds up reporting, making the tool a practical choice for structured measurement chains. Calibrated traceability for compliance and confidence The instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate, ensuring traceability and acceptance in regulated environments. This level of documentation supports internal audits and supplier qualification processes and demonstrates that measurement results meet recognised laboratory standards. The calibration status and certificate reduce administrative effort when integrating the instrument into formal quality systems. Purposeful design for everyday use Beyond numerical performance, the caliper is engineered for routine handling: a robust slide and ergonomic jaws allow stable measurements, while the integrated depth measurement function extends usability to groove and step inspection. The digital interface and clear display shorten measurement cycles and lower the risk of reading errors — a pragmatic contribution to throughput and operator confidence in serial checking tasks. For precise and traceable measurement workflows, contact Metav Werkzeuge for ordering and technical guidance on the Microtech Metrology Precision Caliper 141093030F — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications or integration into inspection routines. Technical data Article number: 141093030F GTIN: 4061905455438 Brand: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: 0.015 mm Readout increment: 0.005 mm Display: E‑Ink 2.13" Measuring force: 8 N external / 4 N internal Data output: Wireless + USB Digital instrument: yes Special features Calibrated to ISO 17025 with calibration certificate included Depth measurement function integrated Category: Standard (0–300 mm) for workshop and machine shop use Low-power E‑Ink display for long battery life Designed for reproducible contact pressure and stable readings FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–300 mm, placing it in the Standard class for general machine‑shop and workshop tasks. Is the instrument delivered calibrated? Yes. The caliper is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceability. How are measured values exported? Measured values can be exported via Wireless connection or USB for direct transfer into inspection software or spreadsheets. What level of accuracy can be expected in routine use? The instrument specifies an accuracy of 0.015 mm with a readout increment of 0.005 mm, providing reliable results for standard quality control tasks. Does the caliper support depth measurements? Yes. The unit includes an integrated depth measurement function for grooves and steps. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper For Internal Grooves, 13mm Display, USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable calibration, reliable USB data capture and robust IP54 protection to keep measurement routines efficient and auditable; order the calibrated instrument directly via Metav Werkzeuge or ask the consultants for specification support. Microtech Metrology digital caliper (USB output, IP54, 300 mm) The Microtech Metrology digital caliper is a workshop-grade measuring instrument for precise external, internal and depth measurements across a 9–300 mm range, designed for production and quality‑control environments. ISO 17025 calibration certificate included USB data output for direct SPC collection IP54 splash and dust protection Large 13 mm digital readout for quick inspection Consistent workshop performance with a standard‑range caliper This instrument sits in the Standard class of calipers (measuring range up to 300 mm), which balances reach with rigidity for general machine‑shop and metalworking tasks. The 9–300 mm top‑jaw and 17–300 mm lower‑jaw ranges extend the usable span for common inspection points while keeping the slide stable enough for reproducible results. Classification as a standard‑range tool means familiar handling and one‑hand operation on typical 150/200/300 mm workshop setups. Traceable accuracy and legible digital output for quality control Calibration to ISO 17025 ensures that the caliper is delivered with a traceable calibration certificate, making it suitable for documented inspection routines. The instrument provides a display resolution of 0.01 mm with an accuracy of ±0.04 mm, values that support routine dimensional checks and first‑article inspections. The 13 mm digital readout improves legibility on the shop floor, reducing interpretation errors and speeding up repetitive measurement tasks. Fast data transfer and durable protection for production workflows Integrated USB data output enables direct transfer of readings into statistical process control (SPC) software or measurement logs, removing manual transcription and lowering the risk of logging errors. The tool’s IP54 rating gives protection against workshop dust and water spray, extending reliable operation in tougher environments. Jaw lengths of 30/70 mm provide practical access to deeper grooves or internal features without compromising handling. How this caliper supports inspection and documentation Delivered calibrated to ISO 17025, the device simplifies audit trails and conformity checks for internal quality systems. The combination of reliable measurement figures, clear digital display and wired data export creates an efficient path from measurement to documentation and analysis. As a product intended for everyday metrology tasks, it fits into assembly, incoming‑goods inspection and routine in‑process checks where documented accuracy and data capture are required. For traceable, workshop-ready measuring capability request the Microtech Metrology digital caliper with ISO 17025 certificate from Metav Werkzeuge—our advisers in Emmerich can confirm technical details and arrange prompt delivery. Technical Data SKU: 141220300 GTIN: 4061905082047 Manufacturer: Microtech Metrology Digital display height: 13 mm Data output: USB Protection class: IP54 Accuracy: ±0.04 mm Resolution: 0.01 mm Measuring range top jaw: 9–300 mm Measuring range lower jaw: 17–300 mm Jaw lengths: 30/70 mm ISO 17025 calibration certificate: included Numbers / Core technical data Resolution (display): 0.01 mm Stated accuracy: ±0.04 mm Maximum measuring range: 300 mm Minimum measuring range: 9 mm Display digit height: 13 mm Special features / Versions USB data output for direct SPC and logging IP54 splash and dust protection Delivered with ISO 17025 calibration certificate Suitable for external, internal and depth measurements FAQ What measuring range does this digital caliper cover? The Microtech Metrology digital caliper covers 9–300 mm on the main jaw and 17–300 mm on the lower jaw, placing it in the standard workshop range up to 300 mm. Is the caliper supplied calibrated and with a certificate? Yes — the caliper is supplied fully calibrated with an ISO 17025 calibration certificate, which supports traceable inspection records. How are readings transferred to a PC or data logger? Measurements are exported via the integrated USB data output, allowing direct capture into SPC software or measurement logs for efficient documentation. What level of protection does the instrument offer for workshop use? The instrument has an IP54 rating, protecting against dust ingress and splashing water typical in a workshop environment. What resolution and accuracy can be expected from the display? The digital display resolves to 0.01 mm, with an overall stated accuracy of ±0.04 mm, suitable for routine quality control and shop‑floor inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper For Internal Grooves, Swiss Digit Display 11mm, IP67, ISO 17025 Calibrated - Microtech Metrology
Benefit from fully traceable measurement results thanks to ISO 17025 calibration, robust IP67 protection and wireless data transfer; these features ensure repeatable quality checks and efficient data capture on the shop floor. Order the precision digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Precision digital caliper by Microtech Metrology – IP67, ISO 17025 calibrated The precision digital caliper is a rugged, shop‑floor capable measuring instrument with a high‑contrast Swiss Digit display and wireless output, designed for reliable inspection and production measurement tasks. ISO 17025 calibrated delivery IP67 dust and water protection 11 mm Swiss Digit high-contrast display Wireless data output for traceable logging Reliable, traceable measurements for production control Delivering fully accredited calibration, this instrument is supplied with an ISO 17025 calibration certificate, which formalises measurement traceability and reduces uncertainty in quality records. The combination of wireless data transmission and a robust enclosure rated IP67 removes common process bottlenecks: measurements can be transferred directly to inspection software without manual re‑entry, while the environmental protection minimises downtime from contamination or coolant exposure. With an accuracy ±0.04 mm, the caliper meets many workshop and production control tolerances, making it a practical choice for recurring dimensional checks and incoming inspection. Practical design that speeds up everyday tasks A clear Swiss Digit display (11 mm height) and compact jaw geometry (30/70 mm) make the gauge straightforward to read and handle in confined or busy workstations. The measurement range of 9–300 mm places the tool in the standard class for machine and metalworking shops, offering the best balance between reach and stiffness for general fabrication and maintenance tasks. Because the readout resolution is 0.01 mm, the instrument provides precise numerical feedback while remaining fast to operate; this reduces cycle time for batch checks and simplifies documentation of conformity. Integration and quality assurance made simple Wireless data output supports seamless logging and quality documentation, enabling efficient batch traceability and statistical process control. The instrument’s combination of a digital readout, robust housing and an accredited calibration certificate reduces interpretation errors and audit risks: recorded values are reproducible and verifiable. For procurement and workshop managers this means fewer interventions, faster inspection loops and a clearer audit trail—advantages that translate directly into improved throughput and lower rework rates. For tailored advice on integrating the Microtech Metrology calibrated caliper into existing inspection workflows, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — to discuss specifications and system compatibility Technical data Article number: 141220304 GTIN: 4061905459641 Manufacturer: Microtech Metrology Digital display: Swiss Digit, 11 mm Data output: Wireless Protection class: IP 67 Calibrated: ISO 17025 certificate included Facts Measurement range: 9–300 mm Minimum measurement: 9 mm Maximum measurement: 300 mm Resolution (reading): 0.01 mm Accuracy: ±0.04 mm Jaw lengths: 30/70 mm Special features IP67 dust‑ and water‑resistant design Wireless data transmission for direct logging Swiss Digit high‑contrast display for quick readings Fully ISO 17025 calibrated with certificate Digital caliper category (Messschieber Digital) Suited to workshop and inspection environments FAQ What measurement range does the caliper cover? The caliper covers a measurement range of 9–300 mm and is classed as a standard workshop instrument; details refer to the precision digital caliper by Microtech Metrology (SKU 141220304). Is the instrument delivered calibrated? Yes — the device is supplied fully calibrated according to ISO 17025 and includes the traceable calibration certificate with delivery. Can the caliper be used on the shop floor near coolants or dust? Yes. The caliper’s IP67 rating provides dust and water resistance suitable for harsh workshop conditions while maintaining stable performance. How are measured values recorded and exported? Measured values can be transmitted wirelessly for direct logging into inspection software, enabling efficient documentation and reducing manual transcription errors. Which applications are best suited for this caliper? Typical applications include incoming inspection, in‑process checks and general workshop measurements where a reliable, calibrated digital instrument is required for reproducible results. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com