Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
1000mm Inline Digital Caliper Color 2.4" Touchscreen, Wireless USB, IP54 – Microtech Metrology
Combine dependable 0.04 mm accuracy, a 0.01 mm resolution and Wireless+USB data transfer for faster quality control and fewer manual entries; order the instrument directly via Metav Werkzeuge or ask our consultants for integration advice. Built-in digital caliper — 0–1000 mm range, Colour 2.4" touchscreen (Microtech Metrology) The built-in digital caliper is a long-range, stainless steel measuring solution for workshop and production environments, designed to capture reliable dimensional data up to 1000 mm. 0–1000 mm measuring range 0.01 mm resolution on digital display Wireless and USB data transfer IP54 protection for workshop use Faster measurement with traceable precision This measuring instrument delivers a stated accuracy of 0.04 mm combined with a resolution of 0.01 mm, which reduces uncertainty in routine checks and helps maintain production tolerances. The numeric specifications translate directly into fewer rejected parts and more predictable process control; by reducing the need for repeat measurements, throughput is improved. The calibration to ISO 17025 (certificate supplied) provides documented traceability for audits and quality management systems. Robust design and practical data handling Constructed from stainless steel, the unit resists workshop wear while the IP54 rating shields electronics from dust and splash exposure. The 2.4" colour touchscreen provides a clear readout and simple menu navigation, while dual data interfaces (wireless and USB) enable fast transfer into inspection software or measurement logs. These features cut manual entry time and minimise transcription errors, supporting leaner inspection routines on the shop floor. Built for larger components and fixture work With a measuring span up to 1000 mm, this caliper belongs to the large-range class used for sizeable components, jigs and housings where profile stiffness and repeatability matter. The extended range makes the instrument suitable for toolrooms, fixture assembly and heavy‑duty machining inspection, offering a practical balance between reach and handling. The built-in format is particularly useful where the measuring system needs to be integrated into fixed stations or custom test rigs. Ready for quality assurance and Industry 4.0 workflows Delivered fully calibrated under ISO 17025, the device arrives with a calibration certificate, enabling immediate use in accredited inspection processes. The combination of digital output and robust metrological documentation simplifies linking measurement results to statistical process control and traceability records. This reduces administrative overhead and supports compliance with internal and external quality requirements. Contact Metav Werkzeuge in Emmerich by e-mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 to discuss how Microtech Metrology's built-in digital caliper can be integrated into existing measurement routines and production control systems Technical data Article number: 142510140 GTIN: 4061905037528 Product: Built-in digital caliper Manufacturer: Microtech Metrology Facts Measuring range: 0–1000 mm Resolution: 0.01 mm Accuracy: 0.04 mm Display: Colour 2.4" touchscreen Protection class: IP54 Special features Material: Stainless steel Data output: Wireless and USB Digital caliper Supplied calibrated to ISO 17025 with certificate FAQ What measuring range does the instrument cover? The built-in digital caliper covers a measuring span of 0–1000 mm, suitable for larger components and fixture inspection. Is the caliper supplied with a calibration certificate? Yes — the instrument is delivered fully calibrated to ISO 17025 and includes the calibration certificate for immediate use in quality-assured processes. How can measurement data be transferred from the device? Measurement data can be exported via the integrated wireless interface or by USB connection, enabling straightforward logging into inspection software or SPC systems. What protection does the housing offer in workshop conditions? The caliper is rated IP54, providing protection against dust ingress and splashing water, making it appropriate for typical workshop environments. Which material is the measuring device made from and why is that important? The device is made from stainless steel, which offers corrosion resistance and mechanical robustness for frequent use in production settings. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000mm Lang-Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 Kalibrierzertifikat - Microtech Metrology
Der Messschieber von Microtech Metrology vereint robuste Schutzklasse, präzise Ablesung und werkstattgerechte Reichweite – ideal für Messaufgaben an großen Bauteilen. Dank ISO 17025 Kalibrierung und IP 67 Schutz liefert das Werkzeug verlässliche Messwerte und kommt mit Kalibrierzeugnis. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder kontaktieren Sie die technische Beratung bei Rückfragen. Messschieber von Microtech Metrology Der Messschieber von Microtech Metrology mit Big Screen Swiss Electronics für präzise Längenmessungen in Werkstatt und Industrie Messbereich bis 1.000 mm für großformatige Bauteile IP 67 Schutz für staub- und wasserdichten Einsatz Ablesung 0,01 mm mit Big Screen Swiss Electronics ISO 17025 Kalibrierung inklusive Kalibrierzeugnis Robuste Konstruktion für wiederholbare Messungen Höchste Messsicherheit durch Kalibrierung und Kontrolle Die Lieferung erfolgt mit vollständiger ISO 17025 Kalibrierung und Kalibrierzeugnis, wodurch Messergebnisse unmittelbar rückverfolgbar und auditfähig sind. Diese Ausstattung macht das Gerät zur verlässlichen Wahl für Qualitätssicherung und Prüfplätze, wo Nachweisbarkeit ebenso zählt wie Reproduzierbarkeit. Anwender profitieren von reduziertem Prüfaufwand und klaren Dokumentationsprozessen. Messbereich und Einsatz für großformatige Bauteile Mit einem nutzbaren Messbereich bis 1.000 mm gehört dieses Modell in die Kategorie Mit Gross und eignet sich für große Werkstücke, Vorrichtungen und Gehäuse. Die Kombination aus Reichweite und stabiler Bauform sorgt für geringe Durchbiegung bei Längenmessungen und macht die Schieblehre praktikabel für Schwerzerspanung und Rohr‑ oder Behälterbau. Bedienkomfort, Anzeige und Umgebungsbeständigkeit Die Big Screen Swiss Electronics Anzeige ermöglicht schnelle Ablesung bei schlechter Beleuchtung, während die Ablesung von 0,01 mm präzise Messentscheidungen unterstützt. Der IP 67 Schutz gewährleistet sicheren Einsatz in staubigen und feuchten Umgebungen, wodurch Reinigungszyklen reduziert und Ausfallzeiten minimiert werden. So bleibt die Messkette verlässlich in rauer Werkstattumgebung. Für wen dieses Messmittel entwickelt wurde Das Instrument richtet sich an Fertigungsingenieure, Messabteilungen und anspruchsvolle Handwerksbetriebe, die große Bauteile zuverlässig prüfen müssen. Die robuste Ausführung und die Kalibrierdokumentation erleichtern die Integration in interne Prüfprozesse und die Einhaltung von Qualitätsanforderungen. Einsetzbar ist die Schieblehre sowohl an Prüfplätzen als auch mobil an der Maschine. Empfehlung: Für messgenaue Kontrollen an großformatigen Komponenten empfehlen wir den Messschieber von Microtech Metrology mit ISO 17025 Kalibrierzeugnis — für Beratung und Bestellabwicklung wenden Sie sich an Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 141310153 GTIN: 4061905452611 Marke: Microtech Metrology Bezeichnung: Messschieber Daten Ablesung: 0,01 mm Genauigkeit: 0,08 mm Messbereich: 85–1.000 mm Besonderheiten IP 67: Staub‑ und Wasser geschützt Digitale Anzeige: Big Screen Swiss Electronics Kalibrierung: ISO 17025 Kalibrierzeugnis liegt bei Schnabellänge: 300xØ3 Digitale Ausführung für einfache Auswertung FAQ Welche Messgenauigkeit kann ich erwarten? Der Messschieber von Microtech Metrology erreicht in den gelieferten Daten eine Genauigkeit von 0,08 mm bei einer Ablesung von 0,01 mm; das beigefügte ISO 17025 Kalibrierzeugnis dokumentiert die Prüfbedingungen und ermöglicht eine verlässliche Einordnung der Messunsicherheit. Ist das Gerät für den Einsatz an der Maschine geeignet? Ja, der Messschieber ist aufgrund des IP 67 Schutzes und der robusten Bauweise für den Einsatz in Werkstattumgebungen und direkt an Maschinen konzipiert; die große Anzeige vereinfacht schnelle Kontrollen. Wird das Gerät kalibriert geliefert? Ja, das Modell wird vollständig kalibriert geliefert. Die Kalibrierung erfolgte nach ISO 17025 und das zugehörige Kalibrierzeugnis ist Bestandteil der Lieferung, damit Prüfprozesse sofort auditfähig sind. Welchen Messbereich deckt das Gerät ab? Der Messschieber bietet einen Messbereich von 85 bis 1.000 mm und ist damit für großformatige Bauteile ausgelegt; diese Reichweite klassifiziert das Instrument in die Mit Gross Kategorie. Welche Anzeige ist verbaut und wie erleichtert sie die Arbeit? Die Big Screen Swiss Electronics Anzeige liefert gut lesbare Messwerte und reduziert Ablesefehler; kombiniert mit der digitalen Ausführung eignet sich das Gerät für schnelle Prüfabläufe und dokumentierte Messergebnisse. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
1000mm Precision Digital Installation Caliper With Remote Display 0.01mm Resolution, Steel Beam, Magnet Back, 2xCR2032 - Metav IndustryLine
Benefit from the combination of a 1000 mm measuring range, 0.01 mm resolution and a separate remote display for flexible installation in production environments; order directly via Metav Werkzeuge or consult our specialists for integration options. Digital built-in caliper ABS M218.278 — 1000 mm, separate display, 0.01 mm (Metav IndustryLine) The Digital built-in caliper ABS M218.278 is a large-range digital caliper with a separate display, designed for accurate length checks and shop-floor measurement of long components. Large 1000 mm measuring range High resolution 0.01 mm display Separate remote display for flexible readout Rear magnet for secure mounting Reliable measurement across long spans This instrument is designed as a large-range caliper (500–1,000 mm class) suitable for measurements where beam stiffness and repeatability matter. The robust steel beam and balanced mass (approx. 3.4 kg) reduce bend and vibration during handling, which helps to maintain measurement consistency over long runs. In environments where every millimetre counts across larger components, the combination of beam rigidity and a calibrated digital system provides a dependable baseline for process control and reduces the need for repeat checks. Precision data output for production workflows Equipped with an absolute measuring system, the caliper offers a display resolution of 0.01 mm and a specified accuracy of ±0.06 mm, which supports routine quality checks and dimensional verification on larger parts. The separate display decouples the readout from the beam for ergonomic viewing, while the integrated data outputs RB6 and Micro‑B and the supplied connection cable (approx. 2 m) allow direct connection to controllers or statistical process control systems. The display supports readouts in mm, inch and fraction, enabling straightforward documentation and downstream data capture. Practical operation and secure mounting on the shop floor Everyday usability is improved by features such as pre-set and hold measurement and a magnetic rear face for temporary attachment to metal fixtures. These functions allow operators to capture and retain a measured value while performing subsequent tasks, reducing handling errors. The separate display improves visibility in confined or awkward setups, and the device is powered by 2×CR2032 cells, keeping replacement simple and standardised. Together, these features streamline repetitive measurement tasks and contribute to a steadier production rhythm. Metav IndustryLine: precision made accessible Metav IndustryLine positions high-precision equipment within reach of workshops and production lines. With a quality filter based in Emmerich and a broad product range, Metav combines technical competence with reliable supply. Choosing this caliper means opting for a measured approach to quality control backed by a supplier experienced in metrology and workshop equipment, helping to keep inspection throughput predictable and traceable. For bespoke installation advice, data‑integration options or to discuss the separate-display setup contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com — our consultants advise on adapting the device to specific workflows. Technical data Article number: M218.278 GTIN: 4054469163925 Manufacturer: Metav IndustryLine Material: Steel Range: 0–1000 mm Numbers / Core technical data Resolution: 0.01 mm (display) Resolution (inch): 0.0005 inch Accuracy: ±0.06 mm Weight: 3.4 kg Power: 2×CR2032 Connection cable: approx. 2 m Special features Separate display included Absolute measuring system Data outputs: RB6 and Micro‑B Pre‑set and hold measurement Rear magnet for mounting Digital readout in mm / inch / fraction Tariff number: 90173000 FAQ What resolution and accuracy can be expected from this caliper? The Digital built-in caliper ABS M218.278 offers a display resolution of 0.01 mm and a stated accuracy of ±0.06 mm, making it suitable for large-format dimensional checks where that tolerance matches the process requirements. Can the separate display be positioned away from the beam and integrated into a system? Yes. The caliper includes a separate remote display and a connection cable of approx. 2 m; it provides RB6 and Micro‑B outputs for straightforward integration with data loggers or SPC equipment. Is an accredited calibration included with the standard delivery? The product data do not specify an ISO‑accredited calibration by default. For an accredited ISO 17025 calibration certificate or special calibration services, Metav Werkzeuge can provide options on request. Which applications are suitable for this 1000 mm caliper? The instrument is optimised for shop‑floor measurement of large components such as fixtures, housings and long assemblies where a stiff beam and remote readout improve repeatability and operator ergonomics. What is included in the delivery and what powers the unit? Included: connection cable (approx. 2 m) and a separate display. The unit is powered by 2×CR2032 cells (battery type specified). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper 0.05mm Resolution Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale 200mm Jaws In Case - Metav IndustryLine
Take advantage of the long 0–1000 mm reach together with a hardened stainless steel monoblock frame and a fine-adjustment screw for repeatable workshop measurements; order the workshop caliper directly via Metav Werkzeuge or ask our consultants if further guidance is required. Metav IndustryLine Workshop Caliper M201.329.3 — 0–1000 mm, Monoblock, Hardened Stainless The Metav IndustryLine M201.329.3 is a workshop caliper engineered for long-range dimensional checks on larger components in metalworking and fabrication environments. 0–1000 mm measuring range Hardened stainless steel, matt-chromed scale Monoblock construction for stability Fine-adjustment screw for precise setting Precision where long reach matters This caliper provides a 0–1000 mm measuring range combined with an analog resolution of 0.05 mm, which corresponds to the industrial mechanical standard for workshop vernier calipers. The scaled vernier (1/128" on the upper scale, 1/20 mm on the lower) enables clear interpolation without electronics, while the adherence to DIN 862 for the specified jaw configuration ensures traceable dimensional practice. The practical benefit is the ability to measure large castings, assemblies and fabricated parts with consistent repeatability and clear, immediate readings. Built for workshop robustness and longevity A single-piece monoblock frame and hardened stainless steel construction give the instrument high stiffness and corrosion resistance, reducing wear over routine use. The matt-chromed scale lowers glare for reliable reading under workshop lighting and protects the graduation from premature abrasion. For heavy-use environments this translates to fewer replacement cycles and steady measurement performance across extended production runs. Comfort and control for reliable measurements The integrated fine-adjustment screw simplifies small positional corrections and speeds up the setting process on long jaws, improving throughput on repetitive checks. The generous 200 mm jaw length supports firm contact on larger surfaces, and the robust vernier layout is optimised for tactile handling in workshop conditions. Together these features reduce operator-induced variability and make the measuring task both faster and more dependable. Practical applications and care Intended for the large-format range in fabrication, jig making and heavy machining, this caliper is suited to dimensional checks on fixtures, housings and spindles where reach and stability are decisive. Being an analogue instrument with mechanical graduation, routine cleaning and occasional lubrication of the guide surfaces preserve accuracy; the hardened surfaces require minimal maintenance but benefit from dry storage to avoid surface deposits. Metav’s role as a precision partner ensures reliable supply and consistent quality for industrial users seeking durable measurement tools. Contact Metav Werkzeuge for tailored procurement advice and to discuss the suitability of the Metav IndustryLine workshop caliper M201.329.3 for specific large-workshop applications Technical data Article number: M201.329.3 GTIN: 4054469101620 Brand: Metav IndustryLine Category: Messschieber (calipers) Facts Measuring range: 0–1000 mm Resolution: 0.05 mm Jaw length: 200 mm Analog vernier: 1/128" (upper) and 1/20 mm (lower) Norm: DIN 862 (applies for jaw length up to 200 mm) Special features Monoblock construction Hardened stainless steel body Matt-chromed scale Fine-adjustment screw Supplied without pointed tips FAQ What measuring range does this caliper cover? The caliper covers a 0–1000 mm range, making the Metav IndustryLine M201.329.3 suitable for long-reach workshop measurements. How precise is the reading on this instrument? The vernier caliper provides a mechanical resolution of 0.05 mm, which is the industrial standard for analogue workshop calipers. Is the instrument suitable for heavy workshop use? Yes, the monoblock frame and hardened stainless-steel construction of the M201.329.3 are designed for robust, repeatable use in fabrication and machining environments. Which standards apply to this caliper? The caliper complies with DIN 862 for the stated jaw configuration, ensuring compatibility with standard mechanical measuring procedures. What care does the caliper require to maintain accuracy? Regular cleaning of guide surfaces, occasional light lubrication and dry storage will preserve the graduation and movement; the hardened finish reduces the need for frequent servicing. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper 500mm Jaws 0.05mm Vernier Stainless Steel Fine Adjustment Monoblock - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a wide 0–1000 mm measuring range and the precise fine-adjustment thumbwheel for repeatable large-format checks; order directly via Metav Werkzeuge or ask the consultants for tailored advice. M201.329.2 Workshop Caliper — Monoblock, 0–1000 mm Range M201.329.2 is a heavy-duty monoblock workshop caliper designed for large-format measurement tasks where rigidity and repeatability matter most 0–1000 mm measuring range Monoblock, heavy-duty construction Fine-adjustment thumbwheel for precise setting Hardened stainless steel, matt-chromed scale Reliable large-range measurement for heavy components The monoblock design provides a rigid measuring beam that reduces deflection across the full 0–1000 mm travel, making the instrument suitable for repetitive checks on large components. The combination of a long jaw length and robust construction delivers improved measurement stability compared with short‑span tools, which translates into fewer re‑measures and more efficient production flow. The analogue vernier arrangement is engineered for workshop durability while still allowing precise readout where digital systems are not required. Durable materials and controlled positioning for consistent results Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and keeps scale contrast high under workshop lighting, aiding fast visual readings. The integrated fine-adjustment thumbwheel lets operators micro‑position the jaws without backlash, which reduces time lost to repeat alignment and improves first‑time acceptance rates. The vernier configuration provides a practical resolution of 0.05 mm, combining traditional mechanical reliability with the tactile control expected in heavy‑duty metrology. Designed for workshop workflows and straightforward handling The instrument’s build reflects the needs of machining and workshop environments: a stable beam, clear vernier graduations and a measured mass that aids controlled handling. This caliper is particularly appropriate where a robust analogue device is preferred for its simplicity and low maintenance overhead. Maintenance routines remain straightforward thanks to the corrosion‑resistant finish and solid construction, supporting long service intervals and dependable inspection routines on large assemblies. Practical benefits for procurement and inspection routines Choosing this monoblock caliper supports stronger process control: stable measurements over a long range reduce cumulative tolerance issues in assembly, while the fine‑adjustment control speeds up set‑up and reduces operator variability. The instrument’s specification aligns with workshop expectations for repeatable performance and long‑term durability, helping to keep production bottlenecks and rework to a minimum. Contact Metav Werkzeuge for expert advice on the Metav IndustryLine monoblock caliper and to arrange supply from our Emmerich centre — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M201.329.2 GTIN: 4054469101613 eClass: 21170344 Tariff number: 90173000 Norm: DIN 862 (up to jaw length 200 mm; from 250 mm per factory standard) Facts Measuring range: 0–1000 mm Jaw length: 500 mm Vernier / resolution: 1/20 mm (0.05 mm) lower; 1/128" upper Mass: 22 kg Special features Monoblock construction Fine-adjustment thumbwheel Hardened stainless steel with matt-chromed scale Analogue vernier display Supplied without pointed tips FAQ What measuring range does this caliper cover? The caliper covers a 0–1000 mm measuring range, making it a large‑range instrument suited to sizeable workshop components. What resolution and vernier specification does the instrument offer? The analogue vernier provides a practical resolution of 0.05 mm (lower scale 1/20 mm) and an additional 1/128" upper vernier for inch references. Which material is used for the scale and body? The body is made from hardened stainless steel with a matt‑chromed scale, which enhances corrosion resistance and legibility in workshop conditions. Is the caliper designed for heavy‑duty workshop use? Yes, the M201.329.2 is built as a heavy‑duty monoblock caliper intended for robust, repeatable measurements across long spans. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With 300mm Jaws, 0.05mm Resolution, Stainless Hardened Monoblock With Fine Adjustment, In Case - Metav IndustryLine
Take advantage of the combination of a monoblock design, hardened stainless steel construction and a fine‑adjustment drive for consistent, reproducible workshop measurements up to 1,000 mm; order the M201.339.2 directly via Metav Werkzeuge or consult the technical advisers for application support. M201.339.2 Workshop caliper with tips (Monoblock, 1,000 mm range) — Metav IndustryLine The M201.339.2 workshop caliper with tips is a robust monoblock caliper intended for workshop and toolroom use, offering long‑range measurement capability and durable construction for repetitive dimensional checks on large components. Monoblock construction for increased rigidity Hardened stainless steel with matt chrome scale Fine‑adjustment drive for precise positioning 1,000 mm measuring range with 300 mm jaws Reliable long‑range accuracy through rigid construction The monoblock frame and hardened stainless steel body provide a stable measuring platform that reduces bending and torsion during handling, which directly improves measurement repeatability. For workshop environments that demand long‑span checks, the rigid design translates into reproducible results and fewer rechecks, supporting efficient production workflows. The extended measuring range up to 1,000 mm enables inspection of large assemblies without the need for improvised fixtures. Precise setting and readable analogue scale for rapid checks Equipped with a fine‑adjustment drive, the caliper simplifies exact positioning of the jaws, making it quicker to reach and lock target dimensions with minimal overshoot. The dual vernier arrangement offers an imperial reference at 1/128" and a metric vernier that corresponds to 0.05 mm, allowing straightforward reading for standard workshop tolerances. This analogue configuration suits environments where a tactile feel and direct scale interpretation are preferable to electronic readouts. Designed for practical workshop applications and extended jaws The long 300 mm jaws increase engagement depth for profiles and stepped areas, so measurements of recessed features and broader surfaces can be carried out with greater confidence. Note that dimensional conformity follows DIN 862 for shorter jaw configurations; for this jaw length the caliper is produced to the factory standard that ensures the required stiffness and usability for larger components. The result is a favourable compromise between reach and handling in everyday machine‑shop operations. Robust finish and low‑maintenance operation for everyday use A matt‑chrome scaled surface reduces reflection under bright workshop lighting, improving legibility of the vernier marks and reducing operator fatigue during repetitive measuring tasks. As an analogue instrument with straightforward mechanics and a monoblock layout, the tool is easy to maintain and repair in‑house, providing long service life and dependable performance for inspection routines and set‑up work. The overall design supports a pragmatic approach to precision without reliance on electronics. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M201.339.2 workshop caliper into production processes or for assistance selecting the right measuring solution for specific component geometries Technical Data Article number: M201.339.2 GTIN: 4054469101859 ECLASS: 21170344 TARIC/HS code: 90173000 Facts Measuring range: 1,000 mm Jaw length: 300 mm Metric vernier resolution: 0.05 mm Imperial vernier: 1/128" Special features Monoblock construction Fine‑adjustment drive Hardened stainless steel body Matt‑chrome scale Analogue/vernier format Conforms to DIN 862 for short jaws; factory standard for 300 mm jaws Supplied with tips for special contact geometry FAQ How accurate is the caliper for routine workshop checks? The M201.339.2 workshop caliper provides an analogue metric resolution of 0.05 mm via the vernier, which corresponds to standard industrial accuracy for mechanical vernier calipers and is suited to typical machine‑shop inspections. Can the instrument measure both imperial and metric dimensions? Yes, the caliper includes a dual vernier arrangement with an imperial reference at 1/128" and a metric vernier for 0.05 mm reading, enabling straightforward use across different drawing conventions. Is the caliper suitable for measuring large components and assemblies? The monoblock frame and 1,000 mm measuring range make this caliper appropriate for larger workpieces; the 300 mm jaw length increases engagement depth for stepped and recessed features. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With 300mm Jaws, 0.05mm Resolution, Stainless Hardened Scale, Fine Adjustment, Monoblock, Supplied In Case - Metav IndustryLine
Take advantage of the monoblock construction, hardened stainless steel and the integrated fine‑adjustment screw to secure reproducible measurements across large components; the substantial 0–1000 mm range supports heavy‑duty workshop tasks while the delivery in a protective case simplifies transport. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Workshop Caliper M201.329.1 — 0–1000 mm, hardened stainless, fine adjust The Metav IndustryLine Workshop Caliper M201.329.1 is a robust analogue caliper designed for heavy‑duty workshop measurement tasks where long reach and mechanical rigidity are required. Monoblock construction for maximum stiffness Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for controlled setting 0–1000 mm range for large components Built to stay true on large measurements The monoblock frame and hardened stainless steel construction provide a rigid measuring backbone that reduces bending and wear during repetitive tasks. With a measuring range of 0–1000 mm, this instrument falls into the heavy‑duty workshop category and is intended for larger workpieces where profile stiffness matters; the 300 mm jaw length extends reach for deep bores and recesses without compromising handling. Delivered in a protective case for safe transport, the caliper is engineered to remain serviceable in daily industrial use, lowering downtime and ensuring consistent results across production batches. Practical analogue precision with fine control The analogue vernier offers a readable scale division of 0.05 mm, combined with a vernier specification of 1/128" (top) and 1/20 mm (bottom) to support quick, reliable readings. The integrated fine‑adjustment screw enables controlled approach and exact positioning, ideal for repeated set‑ups or when gradual contact is necessary. Conformity to DIN 862 applies for shorter measuring jaws; for the longer 300 mm jaw the instrument follows the manufacturer's norm while maintaining the robustness expected in workshop metrology. The mechanical design requires no batteries, making it a dependable tool for on‑bench inspection and shopfloor verification. Practical fit within workshop metrology routines As part of a complete workshop toolkit, this analogue caliper is a straightforward instrument for routine checks and calibration comparators. The heavy‑duty concept simplifies measurement of larger assemblies and reduces the need for multiple specialised gauges, supporting the Metav principle of democratised precision. Backed by Metav’s logistics and quality filtering from Emmerich, the caliper is intended to integrate into supply chains where reliability, repeatability and a clear parts‑handling concept are priorities. For selection advice or delivery details from Metav IndustryLine, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to ensure the caliper matches the workshop requirements. Technical data Article number: M201.329.1 GTIN: 4054469101606 Category: Workshop caliper Facts Measuring range: 0–1000 mm Jaw length: 300 mm Scale division / resolution: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Nonius (analogue): mechanical vernier Special features Monoblock construction Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for controlled setting Analogue vernier, no battery required Delivered in a protective case for transport Conforms to DIN 862 for jaws ≤200 mm; longer jaws to manufacturer's norm FAQ How precise is the reading on this workshop caliper? The workshop caliper provides a scale division of 0.05 mm via its analogue vernier, offering industrially relevant precision for routine shop measurements. Is the instrument suitable for large components and long‑reach tasks? Yes; with a 0–1000 mm measuring range and a 300 mm jaw length, the caliper is designed for heavier, larger components where stiffness and reach are essential. Does the caliper require any power source or batteries? No; the instrument is an analogue vernier caliper and operates mechanically without batteries, ensuring continuous availability on the shopfloor. What protection is provided for transport and storage? The caliper is supplied in a protective case suitable for transport; the case is intended to reduce handling damage but not as a permanent storage environment for long‑term archival purposes. Which standard applies to this instrument? Shorter jaws conform to DIN 862; for the supplied 300 mm jaw, measurements are governed by the manufacturer's norm while maintaining workshop robustness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Pointed Jaws 150mm Depth, 0.02mm Graduation, Hardened Stainless Steel, Fine Adjustment, Supplied In Case - Metav IndustryLine
Take advantage of a robust monoblock design, hardened stainless steel construction and precise fine adjustment to keep large-format measurements reliable and repeatable on the production floor; order directly via Metav Werkzeuge or ask the consultants for technical advice. M201.309 Workshop Caliper with Tip — 1,000 mm range, 0.02 mm resolution, stainless The M201.309 Workshop Caliper with Tip is a heavy-duty analogue caliper built for workshop measurement tasks, providing robust external, internal and step measuring capability for large components. 1,000 mm measuring range Hardened stainless steel construction Fine adjustment screw for precise setting Monoblock frame for high rigidity Stable long‑range measuring for larger components Classified in the Large measurement class (500–1,000 mm), this caliper is tailored to workshop and fixture environments where reach and repeatability matter. The monoblock frame reduces flex along the slide, maintaining alignment over the full measuring length and supporting reproducible results on larger workpieces. The extended jaw geometry with a 150 mm tip length enables secure contact on deep features and shoulders, which simplifies handling of housings, large shafts and assembly fixtures without compromising stiffness. Accurate analogue readings with workshop durability The analogue vernier delivers a mechanical resolution of 0.02 mm, keeping the instrument within the range of the highest mechanical precision for calipers. Combined with a matt‑chromed scale on hardened stainless steel, the scale contrast remains clear under workshop lighting and resistive to corrosion. A dedicated fine adjustment screw permits measured, micro‑movement of the slide for exact closing and alignment before the reading is taken, which is particularly useful when measuring step heights or small depth differences where controlled contact force improves consistency. Practical features that support production workflows Designed for use in everyday machine‑shop conditions, the caliper covers external, internal and step measurements in one instrument and is supplied in a transport case for safe handling and storage during site movement. The mechanical vernier format suits environments where robust, battery‑free operation is preferred and service intervals are minimal. Delivered to factory standard (Werksnorm), the instrument is well suited to workshop quality checks and setup tasks; its straightforward mechanics reduce the need for frequent recalibration cycles compared with sensitive electronic instruments. Choose the Metav IndustryLine M201.309 for durable, long‑range workshop measurement and contact Metav Werkzeuge for expert advice and secure supply directly from Emmerich. Technical Data Article number: M201.309 GTIN: 4054469101293 Brand: Metav IndustryLine Facts Measuring range: 0–1000 mm Resolution: 0.02 mm Jaw length: 150 mm Vernier scales: 1/1000" top and 1/50 mm bottom Special features Material: hardened stainless steel with matt‑chromed scale Design: monoblock frame Operation: analogue vernier, fine adjustment screw Measurement types: external, internal, step Delivery: transport case for safe movement Calibration: factory standard (Werksnorm) FAQ How precise is the caliper for workshop tasks? The M201.309 workshop caliper provides a mechanical resolution of 0.02 mm, placing it among the highest‑precision analogue calipers suitable for demanding workshop measurements. Which measurement types can be performed with this caliper? External, internal and step measurements are supported by the caliper; the 150 mm jaw/tip length helps reach deeper features while keeping contact stable. Is the instrument protected for transport between job sites? Yes, the caliper is supplied in a transport case to protect the hardened stainless steel body and scale during movement and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Hardened Stainless Steel 0.05mm Graduation, Wooden Case - Metav IndustryLine
Benefit from a robust monoblock design, precise fine adjustment and a hardened stainless-steel scale that ensure reproducible measurements across a long 1000 mm range; these features combine to keep production flowing with predictable results. Order the workshop caliper directly via Metav Werkzeuge or consult our technical advisors for application-specific advice. Workshop Caliper M201.339.1 — 1000 mm analogue, fine adjustment (Metav IndustryLine) The Workshop Caliper M201.339.1 is a heavy-duty analogue caliper intended for long-range workshop measurement tasks, offering a 1000 mm measuring range, fine-adjustment screw and hardened stainless-steel scale for reliable component inspection. Monoblock construction for high stability Fine adjustment for precise setting Stainless hardened steel with matt chrome scale 200 mm jaw length for deep reach Stable long-range measurement for large components The caliper's 1000 mm measuring range positions it in the class for long-bar calipers, designed where profile stiffness is essential to keep readings reproducible over distance. The monoblock construction increases rigidity compared with split-frame designs, reducing bending and torsion during handling. With a 200 mm jaw length the instrument reaches deeper features and clamps while maintaining consistent contact geometry, which benefits measurement tasks in heavy machining, jig and fixture inspection, and mould or housing verification. Precise analogue reading with controlled adjustment An analogue vernier with a resolution equivalent to 0.05 mm provides an industrially recognised level of accuracy appropriate for workshop quality control. The combination of a coarse vernier scale (1/128" top) and a metric vernier (1/20 mm bottom) gives flexible reading options on the same instrument, while the fine adjustment screw allows slow, controlled closure for repeatable contact pressure and exact alignment. These features reduce operator-induced error and make this caliper suitable for standard machine-shop checks where dependable, quick readings are required. Rugged materials and workshop-oriented detailing Manufactured from stainless hardened steel and finished with a matt chrome scale, the caliper tolerates workshop environments while keeping scale legibility under typical lighting conditions. The design includes measurement points (tips) for applications that need pointed contact, and the overall build follows established workshop norms referencing DIN 862 for jaw geometry and measuring faces. The robust construction minimises maintenance needs and supports continuous use across shifts, contributing to efficient quality workflows and a low total cost of ownership for medium and large workshops. For large-format workshop measurement needs, contact Metav Werkzeuge to discuss the Metav IndustryLine Workshop Caliper M201.339.1 and arrange purchase or technical consultation Technical data Article number: M201.339.1 GTIN: 4054469101842 eClass: 21170344 Core measurements Measuring range: 0–1000 mm Jaw length: 200 mm Resolution (vernier): 0.05 mm (analogue) Vernier markings: 1/128" (top) and 1/20 mm (bottom) Features and composition Material: stainless hardened steel Scale finish: matt chrome Construction: monoblock Adjustment: fine adjustment screw Special: with measurement tips Norm: DIN 862 (suitable jaw length specification) FAQ What measuring tasks is this caliper best suited for? The Workshop Caliper M201.339.1 is designed for long-range workshop and fixture measurements where a 1000 mm range and increased structural rigidity are required; typical applications include heavy machining, mould inspection and large component verification. How precise are readings from this analogue caliper? Readings are taken with an analogue vernier equivalent to 0.05 mm resolution; the dual vernier layout (1/128" and 1/20 mm) and the fine-adjustment screw support reproducible results for standard industrial quality checks. Is the caliper corrosion resistant and durable for shop use? Yes. The instrument is made from stainless hardened steel and uses a matt chrome scale to preserve legibility and resist typical workshop wear. Can the caliper reach recessed or deep features? The extended 200 mm jaw length improves access to deep bores and recessed features, making it practical for inspection of larger assemblies and components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Points 150mm Jaws 0.05mm Vernier, Monoblock, Fine Adjustment, Hardened Stainless Steel In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless steel construction, a monoblock frame and precise fine adjustment for repeatable measurements of large workshop components; order the instrument directly via Metav Werkzeuge or consult the team for application advice. Workshop vernier caliper M201.339 — monoblock, fine‑adjustment caliper by Metav IndustryLine Workshop vernier caliper M201.339 is a robust analogue measuring instrument designed for heavy workshop use, offering controlled positioning and a long measuring range for large components Hardened stainless steel construction Monoblock frame for exceptional rigidity Fine adjustment for controlled positioning 1,000 mm measuring range with long jaws Reliable precision for large‑format measurements The Workshop vernier caliper M201.339 places reproducible accuracy at the centre of large‑component measurement. Built in hardened stainless steel with a matt‑chromed scale, the instrument resists workshop wear and maintains scale legibility over prolonged use. Its 1,000 mm measuring range classifies it in the large‑range category (suitable for 500–1,000 mm applications), where profile stiffness is essential to reduce deflection and secure repeatability. The analogue nonius arrangement provides a practical reading system and the instrument’s nominal 0.05 mm resolution meets typical workshop control needs while keeping handling straightforward for assembly, jig and fixture checks. Controlled operation to reduce measurement variability A dedicated fine adjustment mechanism and a true monoblock frame minimise operator‑induced variation by allowing slow, deliberate closure and a rigid reference geometry. The 150 mm jaws offer extended reach and permit access into deeper bores or between fixtures; the inclusion of pointed tips supports measurements in narrow grooves or recesses. These mechanical choices translate into fewer rework cycles and faster setup times on the shopfloor, offering a measurable workflow advantage for teams working on housings, shafts and large assemblies. Ready for work: compliance, transport and practical use The caliper is an analogue vernier designed in accordance with DIN 862 where applicable for the given jaw length, providing a familiar normative basis for inspection routines. Delivery in a protective transport case ensures secure storage and mobility across the workshop or between sites. As a straightforward, mechanically robust instrument, it serves as a cost‑effective standard for dimensional checks where electronic readouts are not required but mechanical reliability and long reach are. Consider the Metav IndustryLine M201.339 for workshop measurement tasks that demand long‑range stability and controlled adjustment — contact Metav Werkzeuge in Emmerich for precise specification matching and delivery coordination. Technical data Article number: M201.339 GTIN: 4054469101835 ECLASS: 21170344 Tariff number: 90173000 Type: analogue vernier caliper Facts Measuring range: 0–1000 mm Jaw length: 150 mm Resolution: 0.05 mm Nonius: top 1/128" / bottom 1/20 mm Norm: DIN 862 (for jaw length ≤ 200 mm) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction Fine adjustment mechanism Supplied with pointed tips Analogue operation Delivered in transport case SKU: M201.339 FAQ What measuring range does this instrument cover? The caliper provides a measuring range of 0–1000 mm; the Workshop vernier caliper M201.339 is intended for large‑format workshop measurements. What level of resolution and accuracy can be expected? The analogue nonius yields a 0.05 mm resolution, matching conventional workshop standards for vernier calipers and supporting reliable dimensional checks. Is the instrument suited to heavy workshop environments? Yes — the hardened stainless steel construction, monoblock frame and matt‑chromed scale make the M201.339 robust against shopfloor wear and suited to regular use on fixtures and assemblies. How does the fine adjustment improve measurement? The fine‑adjustment mechanism enables controlled closing and precise positioning of the jaws, reducing operator influence and improving repeatability for serial checks. Does the caliper comply with recognised standards? The instrument is produced with consideration of DIN 862 for the provided jaw length, giving a normative basis for inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probe Fine Adjustment 0.02mm Resolution Stainless Steel With Hardened Matte Chrome Scale - Metav IndustryLine
Take advantage of robust long‑range measurement, hardened stainless steel construction and a precise fine adjustment mechanism to ensure reproducible results across large components; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Workshop caliper M201.319 (Metav IndustryLine) — 0–1000 mm, 0.02 mm The Workshop caliper M201.319 is a large‑format, analogue workshop caliper designed for heavy‑duty measuring tasks in fabrication and tooling environments, offering long‑span capability with precise micrometric positioning. 0–1000 mm measuring range Hardened stainless steel construction Fine adjustment for accurate positioning For external, internal and step measurements Robust long‑range measurement for large components The caliper provides a 0–1000 mm measuring range that places it in the large‑format category suited to substantial assemblies and fixtures. Built as a monoblock instrument, the rigid profile reduces flex and improves repeatability when measuring long bars, housings or pipe sections. Where single‑handed tools lose stiffness, this caliper maintains alignment over its full span, making it appropriate for quality checks and setup tasks in heavy machining and assembly. Material choice and micrometric control minimise rework Constructed from hardened stainless steel with a matt‑chromed scale, the instrument resists workshop wear and provides a clear, non‑reflective reference for reading. The integral fine adjustment screw allows controlled closing of the jaws so the measuring faces meet the workpiece without overshoot; this controlled contact, together with the caliper’s 0.02 mm mechanical resolution, directly reduces measurement scatter and downstream rework by improving first‑pass accuracy on fits and clearances. Versatile measuring modes and practical jaw geometry Engineered for common workshop tasks, the caliper supports external, internal, and step measurements from the same tool, while the extended 150 mm jaw length enables access into recesses and deeper grooves than standard short jaws. The absence of a pointed tip results in larger, better supported contact faces for repeatable readings on flat, curved and stepped surfaces. Supplied to the manufacturer’s works standard, the instrument is intended as a reliable shopfloor reference for setup, inspection and ongoing quality control. Contact Metav Werkzeuge in Emmerich to discuss technical details or to secure the Metav IndustryLine workshop caliper for the production bench. Technical data Article number: M201.319 GTIN: 4054469101385 ECLASS: 21170344 Customs tariff number: 90173000 Facts Measuring range: 0–1000 mm Minimum range: 0 mm Jaw length: 150 mm Resolution: 0.02 mm Type: Analogue (vernier) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame design Fine adjustment mechanism Vernier: 1/1000" (top) and 1/50 mm (bottom) Supplied to works standard Suited for external, internal and step measurements FAQ What measuring range does this caliper cover? The caliper covers a range from 0 to 1000 mm, allowing measurement of large components and assemblies with a single instrument. Is the scale resistant to workshop wear and corrosion? Yes, the M201.319 features hardened stainless steel construction with a matt‑chromed scale for reduced glare and improved resistance to abrasion and corrosion. Can the instrument perform internal and step measurements as well as external checks? Yes, the design supports external, internal and step measurements, making the caliper a versatile tool for routine workshop inspection. What measurement resolution and control does the caliper offer? The instrument provides a mechanical resolution of 0.02 mm and a fine adjustment screw for controlled jaw movement, aiding precise contact and repeatable readings. Is the caliper delivered with an accredited calibration certificate? The caliper is supplied to the manufacturer’s works standard; no ISO 17025 accreditation is indicated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probe Fine-Adjustment Stainless Hardened Matt Chrome Scale, For Outside/Inside/Step Measurements - Metav IndustryLine
Taking advantage of the combination of large-span measurement capability, hardened stainless-steel construction and a fine‑adjustment control ensures reproducible results on heavy workshop components; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop caliper without tip M201.319.1 — 0–1000 mm, stainless steel, fine adjustment The Workshop caliper without tip M201.319.1 is a robust, monoblock stainless‑steel caliper designed for large‑format measurements in workshop and heavy‑duty metalworking environments. 0–1000 mm measuring range 0.02 mm resolution for fine readings Hardened stainless‑steel body Fine‑adjustment screw for precise setting Robust design for long‑span workshop measurement Built as a long‑bar workshop instrument, this caliper covers a 0–1000 mm span and is classified for large‑format measurement tasks where profile stiffness and reproducibility matter. The monoblock construction reduces torsion and flex over the full measuring length, so measurements on fixtures, housings and large workpieces stay consistent. The frame and jaws are made from stainless steel that has been hardened and fitted with a matt‑chromed scale to reduce glare and wear; that combination supports durable use in busy production areas while preserving scale legibility. High mechanical precision and precise setting control The instrument achieves mechanical fine‑reading through an analogue vernier and a dedicated fine‑adjustment screw, enabling sensitive approach and exact zeroing before any reading is taken. The mechanical design yields a practical resolution of 0.02 mm, placing it among the higher‑precision analogue calipers for workshop use. Dual vernier markings (top and bottom) assist with rapid cross‑checks: the upper scale is graduated in fractions of an inch while the lower scale provides metric readings for direct interpretation on machine drawings. Delivered to a factory standard, the tool supports reliable, repeatable inspection routines without the need for complex electronics. Suited to heavy workshop tasks and multiple measurement styles Designed for common workshop operations, the instrument performs outside, inside and step measurements with the same stability thanks to the long jaw length and the robust carrier. The extended jaw length of 200 mm improves accessibility when measuring deep bores or large contours while preserving control during interior checks. Supplied to workshop specification under the manufacturer’s works standard, this caliper is intended for machinists, toolroom staff and assembly technicians who require a dependable analogue instrument for large components. Technical enquiries are welcome; Metav Werkzeuge provides product guidance for selecting the right measuring tool for the application. For dependable large‑span measurements choose the Metav IndustryLine workshop caliper and contact Metav Werkzeuge in Emmerich for product advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M201.319.1 GTIN: 4054469101392 eClass: 21170344 Manufacturer: Metav IndustryLine Norm: Werksnorm Facts Measuring range: 0–1000 mm Resolution / reading: 0.02 mm Jaw length: 200 mm Type: Analog vernier caliper Vernier details: 1/1000" (top) and 1/50 mm (bottom) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction for increased stiffness Fine‑adjustment screw for precise positioning Measurement types: outside, inside and step measurements FAQ How accurate is this workshop caliper for routine checks? Accuracy is based on the analogue vernier and a practical reading capability of 0.02 mm; the Workshop caliper M201.319.1 offers high mechanical precision suitable for standard workshop inspections. Is the caliper suitable for measuring internal diameters and steps? Yes — the design supports inside and step measurements as well as outside measurements, so the instrument covers the three common measurement styles required in metalworking. What construction ensures stability over the 0–1000 mm span? The monoblock frame and hardened stainless‑steel construction reduce flex and torsion, helping to maintain reproducible measurements across long spans. Which standard is the instrument delivered to? The caliper is supplied to the manufacturer’s works standard (Werksnorm), providing consistent factory specifications for workshop use. What industries and tasks is this caliper aimed at? The tool is intended for heavy‑duty workshop and machine‑shop applications: large fixtures, housings, toolroom work and general heavy machining where long‑span analogue measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probes 150mm Jaws 0.05mm Vernier Fine Adjustment Monoblock Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from a hardened stainless-steel construction and precise fine adjustment for reliable, repeatable results on large workshop components; the monoblock design provides stability across extended measuring lengths. Order the caliper directly via Metav Werkzeuge or consult our advisors for tailored technical guidance. Metav IndustryLine Workshop Caliper M201.329 — 1000 mm range, 0.05 mm vernier, monoblock fine adjustment The Metav IndustryLine Workshop Caliper M201.329 is a long-range, hardened stainless-steel caliper designed for robust workshop measurement of large components, combining a 1000 mm measuring scope with a precise fine-adjustment mechanism. 1000 mm measuring range Hardened stainless steel with matt-chromed scale Monoblock frame with fine adjustment Supplied in a protective case Reliable measurement for large workshop components This caliper is tailored to the demands of heavy workshop use: the 1000 mm measuring range places it in the category for long-beam calipers, suitable for sizeable workpieces such as large housings, fixtures and pipe components. The monoblock construction minimises flex over the measuring length, which keeps results reproducible even when handling heavier parts. The stable frame design reduces the need for repeated checks, speeding up routine inspection tasks and supporting a smoother production flow. Clear, repeatable readings with analogue vernier precision Equipped with an analogue vernier system, the instrument provides a practical reading setup: the vernier scales read 1/128 inch (top) and 1/20 mm (bottom), corresponding to a standard workshop resolution of 0.05 mm. This level of resolution is appropriate for many machining and fabrication tasks where robust reproducibility matters more than sub-micron resolution. The matt-chromed scale improves contrast under workshop lighting, and the fine-adjustment screw allows controlled closing of the jaws to avoid overshoot and variability in applied measuring force. Robust materials and compliance for everyday use The measuring faces and beam are manufactured from hardened stainless steel, delivering corrosion resistance and long-term wear performance in busy environments. The jaw length of 150 mm supports deep gripping and offers better support when measuring larger diameters or profiles. Conformance to DIN 862 is maintained for the instrument’s geometry where applicable (jaw length up to 200 mm), ensuring that the caliper meets recognised workshop standards for mechanical calipers. Practical handling and workshop benefits A built-in fine-adjustment mechanism and a monoblock frame combine to make single-handed adjustments straightforward while preserving measurement stability. The caliper is supplied in a protective case for transport and storage, reducing the risk of damage between jobs and keeping the scale clean. For workshops that require dependable, low-maintenance tools, this instrument reduces downtime and supports consistent quality control on larger components. Contact Metav Werkzeuge today to discuss application suitability for the Metav IndustryLine caliper M201.329 and to arrange fast delivery from our Emmerich facility Technical data SKU: M201.329 GTIN: 4054469101590 Category: Messgeräte › Messschieber Facts Measuring range: 0–1000 mm Resolution/vernier: 0.05 mm; 1/128" (top); 1/20 mm (bottom) Jaw length: 150 mm Standard: DIN 862 (applicable for jaw length up to 200 mm) Special features Material: hardened stainless steel with matt-chromed scale Monoblock design Fine adjustment screw Delivered in protective case Analogue vernier instrument FAQ Is this caliper suitable for large workshop parts and fixtures? The Metav IndustryLine Workshop Caliper M201.329 is designed for large components, offering a 1000 mm measuring range and a rigid monoblock frame for reproducible results on sizeable workpieces. What reading resolution does the instrument provide? The caliper uses an analogue vernier with a 0.05 mm resolution (1/20 mm on the lower scale) and an additional 1/128" top scale for inch-referenced readings; this suits general machining and inspection tasks. Does the caliper comply with recognised standards? Yes—geometry and dimensional rules follow DIN 862 where applicable for the specified jaw length, ensuring alignment with common workshop standards. How is the instrument delivered and protected during transport? The caliper is supplied in a robust protective case to safeguard the beam and scale during transport and storage, preserving accuracy between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Digital Caliper 150mm Long Jaws Color Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Robust long‑jaw construction, reliable 0.01 mm readout and integrated Wireless + USB data transfer support efficient large‑format quality control. Delivered fully calibrated to ISO 17025 with a calibration certificate, the instrument reduces documentation effort and rework. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Workshop Caliper — 0–1000 mm digital caliper with 2.4″ colour touchscreen and Wireless+USB The Microtech Workshop Caliper is a long‑range digital caliper built for workshop and fixture tasks up to 1,000 mm, combining a rigid beam design with a precision fine‑adjustment mechanism for reproducible measurements 0–1000 mm measurement range 0.01 mm display resolution Wireless and USB data output Delivered calibrated to ISO 17025 Accurate large‑format measurement with minimal repositioning The long‑span measuring capacity of 0–1000 mm enables direct measurement of sizeable components without repeated repositioning, which speeds up inspection routines and reduces accumulated error. A stiff beam profile and a long jaw (150 mm) give stability across the measuring length, so readings remain reproducible even on heavier workpieces. This design suits applications in fixture construction, housing inspection and general heavy‑duty workshop metrology, where reach and rigidity are both decisive for reliable results. Fast digital readout and seamless data capture for SPC A high‑contrast 2.4" colour touchscreen provides immediate, easy‑to‑read values and intuitive on‑screen controls for switching units or zeroing. The instrument reports values with 0.01 mm resolution and exports measurement records via Wireless and USB connections, simplifying integration with data collection systems and production traceability. By removing manual transcription, this workflow reduces clerical errors and accelerates statistical process control loops for serial production environments. Reproducible contact force and certified traceability Consistent contact is enabled by an adjustable 1–20 N measuring force and a sensitive fine adjustment slide, which together reduce variability caused by operator pressure. Handcrafted measuring jaws ensure parallelism and long‑term wear resistance, producing stable contact conditions over repeated cycles. The caliper is delivered fully calibrated to ISO 17025, complete with a calibration certificate, providing traceable measurement results that integrate directly into documented quality systems and audit requirements. Workshop durability and practical handling Built for everyday shop use, the instrument combines robust electronics and mechanical components to withstand regular handling while remaining serviceable. The long‑range format is balanced to be manageable by one or two operators when required, and maintenance is straightforward thanks to accessible sliding surfaces and modular electronics. Paired with Metav Werkzeuge’s supply chain and product range, this caliper becomes part of a controlled, dependable measurement set‑up that supports ongoing production needs and reduces supply‑chain complexity. For lab‑grade traceability and reliable large‑format measurement, request the Microtech workshop caliper through Metav Werkzeuge — specifications and delivery are handled from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Technical Data Article number: 141010216 GTIN: 4061905038921 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Data output: Wireless + USB Core technical data Measuring range: 0–1000 mm Resolution: 0.01 mm Measuring force: 1–20 N Jaw length: 150 mm Special features Handcrafted measuring jaws Fine adjustment mechanism Delivered calibrated to ISO 17025 with certificate Digital instrument for workshop and fixture use Long‑span design for large components FAQ Is the instrument delivered calibrated and traceable? Yes. The Microtech workshop caliper is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceable documentation. What measurement resolution and range does it offer? The caliper provides a 0.01 mm display resolution across a measuring range of 0–1000 mm, suitable for large‑format workshop checks. How are measurement results exported from the device? Measurement data can be transmitted via the caliper’s Wireless and USB interfaces for integration with PCs and data collection systems. Does the caliper maintain consistent contact pressure during measurement? An adjustable 1–20 N measuring force together with a fine‑adjustment slide and handcrafted jaws supports reproducible contact conditions and repeatable readings. For which workshop applications is this caliper best suited? The instrument is designed for heavy‑duty workshop metrology, fixture and housing inspection where extended reach and beam stiffness are required for direct, single‑pass measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000mm Workshop Precision Digital Caliper Long Jaws Color 2.4" Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of a 1,000 mm measuring range and ISO 17025 traceable calibration for reproducible, large-format measurements; fine adjustment and handmade jaws ensure reliable contact and reduced measurement uncertainty. Order directly via Metav Werkzeuge or consult our specialists for tailored delivery. Workshop digital caliper by Microtech Metrology — 1,000 mm range, colour touchscreen Workshop digital caliper for robust, large-format workshop and industrial metrology applications, combining long-reach jaws with a responsive colour touchscreen and modern data outputs. 1,000 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Accurate measurements for large components without compromise The long-beam design offers a 1,000 mm measuring range while maintaining the rigidity required for consistent results on large parts. With a display resolution of 0.01 mm, the instrument supports standard workshop tolerances and gives clear numerical readouts that reduce reading errors compared with analogue scales. The handmade measuring jaws and fine adjustment mechanism refine contact positioning, limiting over- or under-pressure and improving repeatability for tasks such as checking housings, flanges or large fixtures. Streamlined data capture to speed up quality documentation Equipped with wireless + USB outputs and a 2.4" colour touchscreen, the caliper integrates with data-collection workflows and inspection routines. Measurement values can be transferred directly to QA software or spreadsheets, cutting manual transcription time and lowering the risk of documentation mistakes. The responsive touchscreen simplifies unit switching and menu navigation, while the digital interface preserves traceable measurement sequences for faster process control and reporting. Engineered for dependable everyday workshop use A measuring force range of 1–20 N helps manage contact pressure across different materials and geometries; controlled force reduces deformation on soft workpieces and ensures stable readings on heavy-duty components. The combination of robust construction and a long 300 mm jaw length for deeper reach makes the instrument particularly suited to servicing, jig inspection and assembly applications where access and repeatability are essential. The unit is optimised for practical handling in industrial environments, balancing reach with manageable handling characteristics. Traceable calibration and quality assurance for production settings Delivered with an ISO 17025 calibration certificate, the instrument meets formal laboratory traceability requirements and supports auditable measurement processes. This calibration standard ensures that the measurement chain is documented and comparable across suppliers and inspection stations. For procurement and quality managers, the certificate reduces validation effort and shortens qualification cycles before the caliper enters regular use on the shop floor. For procurement of ISO‑calibrated, large‑range metrology instruments, contact Metav Werkzeuge in Emmerich for purchase advice and reliable supply of the Microtech Metrology workshop digital caliper (SKU 141010256) Technical data SKU: 141010256 GTIN: 4061905038952 Manufacturer: Microtech Metrology Core technical data Measuring range: 0–1000 mm Resolution: 0.01 mm Measuring force: 1–20 N Jaw length: 300 mm Special features Colour 2.4" touchscreen Wireless + USB data output Fine adjustment mechanism Handmade measuring jaws Delivered calibrated to ISO 17025 FAQ Is the caliper calibrated for laboratory use? Yes. The workshop digital caliper from Microtech Metrology is delivered with an ISO 17025 calibration certificate, providing laboratory‑level traceability and documented measurement uncertainty. What data interfaces are available for automated documentation? The instrument offers both wireless and USB data output, enabling direct transfer of measurement values to inspection software, spreadsheets or data loggers for efficient documentation. What measurement resolution and accuracy can be expected? The display resolution is 0.01 mm; combined with the fine‑adjustment mechanism and robust jaw design the caliper supports standard workshop accuracy suitable for general machine‑shop quality control. Can the caliper reach recessed features or deep bores? The extended jaw length of 300 mm improves reach into deeper recesses and across wider components, making the instrument suitable for many large‑format inspection tasks. Is the measuring force adjustable and why does it matter? Yes; the device specifies a measuring force range of 1–20 N. Controlling contact force reduces deformation of soft materials and stabilises readings on heavy workpieces, improving repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm Brake Disc Gauge 120mm Jaw, Matt Chrome, Vernier 0.1mm, Inox, Supplied in Case - Metav IndustryLine
Take advantage of a robust workshop instrument that combines stainless steel construction, a compact 0–100 mm measuring range and a clear Vernier 0.1 mm reading for dependable brake disc checks; order or consult via Metav Werkzeuge for tailored advice and supply. Brake disc inspection gauge M201.181 – stainless steel, Vernier 0.1 mm (Metav IndustryLine) The Brake disc inspection gauge M201.181 is an analogue measuring caliper developed for rapid dimensional checks of brake discs and similar components in workshop and inspection environments. Stainless steel construction, matt chrome finish Measuring range 0–100 mm, compact format Vernier scale 0.1 mm resolution Jaw length 120 mm for deep contact Consistent workshop readings for routine inspection The analogue Vernier scale provides a reliable, mechanically robust alternative to digital instruments, giving a readable graduation of 0.1 mm that suits frequent checks during maintenance shifts. Solid stainless steel construction with a matt chrome surface reduces wear and resists workshop grime, so calibration stays stable between service intervals. The compact 0–100 mm range places this instrument in the standard workshop class, offering the best balance of reach and stiffness for everyday brake disc thickness and diameter checks while remaining easy to handle and store. Purpose-built geometry for brake disc control With a jaw length of 120 mm, the gauge is dimensioned to engage brake discs at appropriate contact points, simplifying thickness verification without elaborate fixturing. The instrument’s analogue nature removes dependence on batteries and electronics, allowing direct comparison readings and immediate pass/fail decisions during inspection runs. Where a simple, repeatable measurement routine is needed, this caliper supports efficient throughput and reduces process interruptions, contributing to measurable time savings on each service bay. Durable design that supports workshop practice The matt chrome plating on the stainless base material improves scratch resistance and gives a non-reflective surface that helps visibility of the Vernier marks under workshop lighting. Being an analogue instrument, maintenance consists mainly of cleaning and occasional lubrication of the slide, keeping lifetime costs low while maintaining measurement reliability. The tool is ideal for technicians who prioritise robust, low-maintenance instruments that integrate seamlessly into standard quality-control workflows. Contact Metav Werkzeuge for application guidance or to arrange a supply of the M201.181 brake disc inspection gauge from Metav IndustryLine; regional stock and technical consultants in Emmerich can advise on compatibility with inspection procedures and dispatch options. Technical data Article number: M201.181 GTIN: 4054469100951 ECLASS: 21170344 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–100 mm Jaw length: 120 mm Reading / graduation: 0.1 mm (Vernier) Instrument type: analogue vernier caliper Special features Material: inox (stainless steel) Finish: matt chrome plated Application: brake disc inspection and basic workshop metrology Format: compact standard caliper suitable for hand operation FAQ How accurate is the Vernier on this gauge? The Vernier provides a reading graduation of 0.1 mm; typical workshop reproducibility aligns with the instrument’s analogue design and stable stainless construction. Can the instrument measure brake disc thickness reliably? Yes, the caliper’s jaw geometry and 120 mm jaw length are intended to support rapid brake disc thickness checks and dimensional verifications in service environments. Is the gauge suitable for everyday workshop use? The matt chrome finish and stainless steel base make the instrument robust against routine handling and contamination, supporting continuous use with minimal maintenance. Does the instrument require batteries or electronic upkeep? No; being an analogue vernier caliper, the gauge operates mechanically and does not require batteries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Depth Stop 8mm Width For Pocket Calipers Up To 200mm Stainless Hardened Ground Lapped - Metav IndustryLine
Reliable depth control and corrosion resistance combine to deliver consistent, repeatable measurements for pocket calipers up to 200 mm, while the compact 100 x 8 mm footprint keeps setups unobtrusive. Benefit from hardened, finely finished stainless steel for long service life and order the accessory directly via Metav Werkzeuge or consult our specialists for application advice. Depth stop M401.031 — pocket caliper accessory, 100 x 8 mm, stainless steel A Depth stop M401.031 that converts pocket calipers into a dependable depth-measuring tool, intended for workshop and toolroom use where compact, repeatable depth control is required. Hardened stainless construction Compact 100 x 8 mm footprint Compatible with pocket calipers up to 200 mm Finely ground and lapped surface Better depth control for everyday metrology The adapter provides repeatable depth measurement by giving a stable reference face where pocket calipers otherwise lack a large bearing surface. With a compact 100 x 8 mm contact area, the attachment reduces lateral play and helps maintain alignment during insertion and extraction, which raises process reliability in small-batch production and inspection tasks. Classified for the standard measurement range (up to 300 mm), this accessory suits the typical demands of machine shops and metalworking benches that rely on compact instruments. Robust materials for low-maintenance longevity Manufactured from stainless steel, the stop has been hardened and finely ground and lapped to ensure a flat, wear-resistant measuring face. These treatments improve corrosion resistance and maintain dimensional stability under repeated use, reducing the need for frequent replacement. The hard, precision-finished surface also minimises measurement uncertainty caused by contact deformation, which is especially valuable when working with small tolerances in everyday production environments. Simple integration and clear application benefits Designed as an accessory for pocket calipers, the unit fits quickly and provides a consistent datum for depth checks on recesses, bores and stepped components. The compact form factor avoids interference with surrounding geometry while giving a larger bearing area than the caliper jaw alone, so setup time is reduced and measurement throughput improves. If an exact fit or application advice is needed, technical guidance is available to match the accessory to specific caliper models or inspection workflows. For practical advice or to request this Metav IndustryLine depth stop M401.031 for reliable depth checks on pocket calipers up to 200 mm, contact Metav Werkzeuge — experts for precision tools and workshop supply Technical data SKU: M401.031 GTIN: 4054469143637 ECLASS: 21029210 Customs tariff number: 90178090 Facts Dimensions: 100 x 8 mm Compatible caliper range: up to 200 mm Type: Analog accessory Special features Material: stainless steel, hardened, finely ground and lapped Application: depth measurement accessory for pocket calipers Category: calipers / calipers accessory FAQ How does the depth stop attach to a pocket caliper? The depth stop M401.031 is designed to seat against the caliper beam and provide an extended bearing face; mounting is intended for pocket calipers with a compatible beam profile and up to 200 mm measuring range. Is the material suitable for workshop environments with metalworking fluids? Yes, the stainless steel construction and fine surface finishing of the M401.031 resist corrosion and cleaning agents commonly used in machine shops. Can this accessory improve repeatability compared with the caliper alone? By offering a larger, hardened contact face, the M401.031 reduces bending and positional variance, improving repeatability for depth measurements compared with relying on the caliper jaws alone. Is the depth stop suitable for precision inspection tasks in a toolroom? The hardened, lapped surface makes the accessory appropriate for routine inspection where consistent reference faces are required; it is intended for standard-range pocket calipers used in workshop and toolroom environments. Does the product require any special maintenance? Routine cleaning and occasional lubrication of the caliper beam are sufficient; the hardened and lapped finish minimises wear and helps maintain measurement stability over time. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Digital Caliper Sharp Jaw Metal Housing 30mm 15° With On/Off Mm/Inch And Zero Buttons, Four-Point Measurement, Supplied In Case - Metav IndustryLine
Benefit from the combination of a hardened stainless steel construction, a clear digital readout and a compact 100 mm measuring range for reliable workshop performance; order via Metav Werkzeuge or consult our specialists for application advice. Digital caliper 100 mm — pointed jaws, stainless steel, Metav IndustryLine The Digital caliper 100 mm is a compact precision instrument for internal, external, depth and step measuring in workshop and inspection tasks. Hardened stainless steel construction Pointed jaws 30 mm, 15° angle Digital mm/inch display with zero Four measurement functions (internal/external/depth/step) Compact 100 mm range, lightweight 0.18 kg Precision where space is tight The caliper’s compact 100 mm range classifies it in the micro segment for fine mechanical work, where short jaws minimise torsion and secure repeatable results. The pointed jaws (30 mm, 15°) allow access to narrow bores and small features that standard jaws cannot reach, turning constrained spaces into measurable zones. For routine inspection and small-part assembly, this configuration reduces handling time while maintaining the necessary stiffness for trustworthy readings. Clear readout and versatile measuring modes Equipped with a robust metal housing and a digital display offering on/off, mm/inch selection and a zero function, the instrument simplifies measurement workflows and reduces transcription errors. Standard digital calipers typically provide a display resolution of 0.01 mm, which facilitates quick decision-making on shop floors and in quality control. The four measurement modes — external, internal, depth and step — consolidate several gauges into one tool, improving efficiency and lowering the need for additional instruments. Built for daily workshop use Made from hardened stainless steel, the instrument resists wear and keeps sliding surfaces true under frequent use. The lightweight construction (0.18 kg) and compact form factor make it easy to handle for prolonged inspection tasks without compromising stability. The rugged metal body protects the electronics and extends service life in workshop conditions, while the pointed jaw geometry supports specialised tasks in precision engineering and micro-assembly. Contact Metav Werkzeuge in Emmerich for tailored application advice and to arrange delivery of the Metav IndustryLine digital caliper (M240.016) directly from our warehouse. Technical data Article number: M240.016 GTIN: 4054469112510 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–100 mm Weight: 0.18 kg Jaw length / profile: 30 mm, 15° Range minimum: 0 mm Special features Material: hardened stainless steel, metal housing Digital display with on/off, mm/inch and zero functions Pointed jaws for narrow bores and fine parts Four measurement functions: internal, external, depth, step Category: calipers (precision workshop measuring tool) FAQ What measurements can be taken with this caliper? The caliper performs internal, external, depth and step measurements; the Metav IndustryLine Digital caliper 100 mm (M240.016) supports all four modes for versatile shop use. Is the instrument suitable for fine mechanical or watchmaking tasks? Yes, with its 100 mm micro-range, pointed jaws and hardened stainless-steel construction, this caliper is designed for fine mechanical work and measurements in confined spaces. How is the display operated and read? The display offers on/off control, a mm/inch toggle and a zero button to set reference points quickly; these functions on the Digital caliper 100 mm streamline repetitive checks and reduce reading errors. Can the caliper withstand daily workshop use? The metal-housed, hardened stainless-steel build of the Metav IndustryLine caliper ensures durability and resistance to wear, making it suitable for regular inspection and production tasks. Which identifier should be quoted when ordering spare parts or accessories? Quote the SKU M240.016 and the GTIN 4054469112510 when enquiring about accessories or replacement parts for this Metav IndustryLine digital caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Digital Caliper Stainless Steel Body 9.5mm LCD, mm/inch, Zero, Four-Point Measurement, Supplied in Case, DIN 862 - Metav IndustryLine
Take advantage of a compact 100 mm measuring range, robust hardened stainless-steel construction and a clear digital readout with 0.01 mm resolution for reliable workshop control; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M216.034 — compact 100 mm digital caliper with hardened stainless-steel housing and mm/inch display Digital Caliper M216.034 is a compact measuring instrument designed for high-precision work in small components and fine mechanical assemblies Compact 100 mm range for tight work Resolution 0.01 mm with mm/inch toggle Hardened stainless-steel construction Four measurement functions: in/out/depth/step Precision in a compact format for fine-detail work The M216.034 is classified as a micro-class caliper thanks to its 100 mm range, making it well suited for precision tasks where space and repeatability matter. Conforming to DIN 862, the instrument provides a resolution of 0.01 mm, which meets the typical requirements for workshop-quality digital calipers; this resolution is complemented by a standard accuracy range of approximately ±0.02 mm for spans up to 100 mm, offering reliable comparative and go/no-go checks. The compact beam geometry reduces torsion and supports consistent contact conditions, which translates into reproducible results on small parts such as micromechanical components, electronic housings and model assemblies. Flexible measuring modes that speed routine checks Equipped with four measurement functions, the caliper covers external, internal, depth and step measurements without additional tools. The zero function enables fast relative measurements and differential checks, allowing immediate comparison between nominal and actual dimensions. For workshop workflows, this flexible set of modes reduces handling time and the need to swap instruments, improving throughput on repetitive quality-control tasks while maintaining traceable measurement logic for inspection records. Clear digital readout and practical handling A high-contrast display with a 9.5 mm digit height presents readings clearly at a glance; the unit offers ON/OFF, mm/inch toggle and a reset (zero) key for immediate operation. Switching between metric and imperial units is straightforward, so measurements can be communicated or recorded in the preferred format without manual conversion. The short jaw geometry (30/17 mm) supports access to confined features while still providing stable contact surfaces for external and internal checks. Robust build for everyday workshop use Constructed from hardened stainless steel and protected by a metal housing, this instrument resists corrosion and everyday wear, making it suitable for production benches and service environments. The compact design, labelled as small, combines stiffness with manoeuvrability; technicians and precision mechanics benefit from a tool that is easy to handle, stores simply and retains accuracy across frequent use cycles. The overall character of the device addresses the need for a dependable, low-complexity measuring instrument in maintenance, prototyping and fine-assembly contexts. For compact, reliable precision choose the Metav IndustryLine M216.034 — contact Metav Werkzeuge for tailored advice and prompt supply from Emmerich: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M216.034 GTIN: 4054469110042 Measurement range: 0–100 mm Standard: DIN 862 Display: digital with ON/OFF, mm/inch and zero button Facts Resolution: 0.01 mm Resolution (inch): 0.0005 in Display height: 9.5 mm Jaw length: 30/17 mm Customs tariff number: 90173000 Special features Four measurement functions: external, internal, depth, step Material: stainless steel, hardened, metal housing Compact design for confined areas Conforms to DIN 862 FAQ How accurate is the M216.034 for workshop measurements? The M216.034 delivers a resolution of 0.01 mm and, in the typical working range up to 100 mm, corresponds to the standard workshop accuracy of approximately ±0.02 mm under consistent measuring conditions. Which measurement types are possible with this caliper? The instrument supports external, internal, depth and step measurements — all four functions are available without accessories, enabling versatile use on diverse components. Can results be displayed in inches? Yes. The digital readout provides an easy mm/inch toggle so measurements can be shown in metric or imperial units instantly. Is the caliper suitable for precision electronics and micromechanics? Yes. With its 100 mm compact range, fine jaw geometry and 0.01 mm resolution, the caliper is appropriate for fine mechanical assemblies, electronics housings and small-part inspection. Does the M216.034 comply with any standards? The caliper conforms to DIN 862, reflecting its suitability for standard workshop and inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Digital Flush-Mount Caliper Bidirectional Measurement, Capacitive System, DIN 862 - Metav IndustryLine
Take advantage of the combination of precise capacitive measurement, a compact 100 mm range and DIN‑compliant construction for reliable, repeatable checks at the production line. Order directly via Metav Werkzeuge or consult the team for integration advice. Digital built-in caliper M218.252 (100 mm, stainless, DIN 862) — Metav IndustryLine The Digital built-in caliper M218.252 is a vertical, stainless steel, 100 mm caliper intended for flush mounting where compact, DIN‑862‑compliant digital measuring is required in workshop and production environments. 100 mm measuring range, DIN 862 compliant Capacitive measuring system with 0.01 mm reading Bidirectional measurement capability Stainless vertical design for flush mounting Accuracy and performance that reduces rework The built‑in design combines a capacitive measuring system with a standard digital readout to deliver a 0.01 mm reading and an industry‑grade ±0.02 mm accuracy (specified for this measuring range). This means fewer ambiguous measurements and a lower risk of rework: the capacitive system records position changes without mechanical wear, improving long‑term repeatability. In practice, the compact 100 mm format is ideal for routine quality control and inline checks where space is limited but precision remains essential. Integration and data handling for efficient production Designed for flush mounting, the instrument provides a reliable electrical interface (RB 5) and a multifunction display with ON/OFF, mm/inch, zero/ABS, TOL and HOLD functions for straightforward setup and tolerance control. The built‑in configuration simplifies installation into jigs or fixtures, enabling direct measurement transfer to data acquisition systems and reducing manual logging. The combination of digital output and straightforward controls speeds up inspection cycles and supports traceable production workflows. Practical benefits for workshop and small‑series manufacturing At a weight of just 0.35 kg and a compact construction, this caliper is easy to mount and keeps the measuring station uncluttered. The vertical, stainless design resists shop contaminants and suits both machine tool enclosures and assembly stations. Compliance with DIN 862 provides a common reference for calibration and process documentation; together with the device’s bidirectional measurement capability, it supports a wide range of contact‑based checks from simple outside measurements to dedicated fixture applications. Why this instrument suits quality‑minded teams The caliper’s technical balance—compact range, capacitive sensing and dependable digital output—addresses the principal need of production teams: fast, reproducible checks with minimal setup time. Metav’s curated range and warehouse in Emmerich act as a quality filter for the European market, giving purchasing teams confidence that the instrument meets workshop demands and will be supported across the supply chain. The result is a measurable reduction in inspection time and better alignment with process control targets. For specification matching, integration details or to place an order for the Metav IndustryLine M218.252 built‑in caliper, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss your application and delivery options. Technical Data Article number: M218.252 GTIN: 4054469111841 Manufacturer: Metav IndustryLine Facts Measuring range: 0–100 mm Reading resolution: 0.01 mm Accuracy: ±0.02 mm Weight: 0.35 kg Tariff number: 90173000 Measurement system: capacitive Standard: DIN 862 Special features Vertical, stainless design for flush mounting Digital display with ON/OFF, mm/inch, zero/ABS, TOL, DIR, HOLD functions Data output: RB 5 Bidirectional measurement capability FAQ Is this caliper suitable for use on the shop floor for routine checks? Yes. The M218.252 from Metav IndustryLine combines a stainless vertical housing with digital readout and a capacitive sensing system, making it robust enough for routine shop‑floor checks while retaining factory‑level accuracy. What level of accuracy and resolution can be expected? The instrument offers a 0.01 mm reading resolution with an accuracy specification of ±0.02 mm within the 0–100 mm range, appropriate for standard machine‑shop quality control tasks. Can the caliper transmit measurements to a data logger or PLC? Yes. The device includes an RB 5 data output suitable for connection to data collection systems, enabling digital transfer of measurement values for traceability and statistical process control. Does the caliper come ready for mounting in fixtures? The M218.252 is designed as a built‑in (flush) caliper, which simplifies integration into fixtures and jigs for inline measurement applications; electrical and mechanical mounting points are arranged for compact installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Digital Precision Caliper Horizontal Small Body Stainless Steel DIN 862, 0.01mm Readout - Metav IndustryLine
Benefit from a compact, installation-ready instrument that combines a hardened stainless steel construction with a 0.01 mm digital display for dependable shop-floor checking; order the digital built-in caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital built-in caliper M218.153.N — 100 mm compact, hardened stainless steel, DIN 862 (Metav IndustryLine) The Digital built-in caliper M218.153.N is a compact, DIN‑862‑compliant 100 mm caliper designed for precise, space-saving measurements in production and assembly settings. Compact 100 mm built-in digital caliper 0.01 mm display resolution Hardened stainless steel construction DIN 862 compliant small housing Precise integration for tight installation spaces The compact, built-in format of this instrument makes it suitable for recessed installation or use where external calipers would be too bulky. Classified in the micro range (measurement range up to 100 mm), the device is optimised for fine mechanical tasks and component checks where limited jaw length and low torsion are an advantage. The small housing and horizontal orientation reduce interference in confined fixtures while retaining a robust measuring head, so inline inspection becomes practical without sacrificing handling or throughput. Measurable accuracy that supports production decisions A 0.01 mm display resolution combined with a declared accuracy of ±0.02 mm delivers results that meet standard workshop and quality‑control requirements. The digital readout features ON/OFF, ZERO, UNIT and HOLD functions for efficient process work and clear readouts at the point of measurement. This balance of resolution and accuracy supports rational decision-making on the shop floor: faster pass/fail checks, reduced rework and consistent assembly quality thanks to reproducible readings. Durable materials and standards for long service life Constructed from hardened stainless steel, the caliper resists corrosion and mechanical wear common in industrial environments. Compliance with DIN 862 gives a recognised baseline for caliper geometry and performance, simplifying integration into existing inspection routines. The instrument runs from a 3 V supply and includes a compact, maintenance‑friendly design that lowers downtime and maintains measurement confidence under frequent use. Data output and practical handling for efficient workflows A dedicated RB 5 data output enables straightforward integration with inspection logs or data acquisition systems when required, supporting traceability and digital documentation. At a weight of just 0.2 kg, the unit is light enough for easy handling during assembly checks yet rigid enough for reliable contact measurement. The combination of built‑in mounting, digital convenience and standardised output reduces time spent on manual transcription and improves overall process efficiency. Choose Metav IndustryLine’s compact built‑in caliper for reliable, space‑saving precision; contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for specification matching and fast supply Technical data Article number: M218.153.N GTIN: 4054469160733 Category: Calipers Data Measuring range: 0–100 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.02 mm Weight: 0.2 kg Power supply: 3 V Special features Material: hardened stainless steel Standard: DIN 862 Display: digital with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Housing: small, horizontal orientation Built-in caliper for integration eClass: 21170344 FAQ What is the measuring range and resolution of this caliper? The caliper measures from 0 to 100 mm with a display resolution of 0.01 mm. How accurate are the readings under workshop conditions? The instrument provides an accuracy of ±0.02 mm, suitable for standard machine‑shop inspection and quality control tasks. Which materials is the caliper made from and why does that matter? The body is made from hardened stainless steel, which improves corrosion resistance and longevity in industrial environments. Does the caliper provide data output for documentation? Yes, the unit includes an RB 5 data output for connection to data-logging or SPC systems. Is the caliper compatible with DIN standards? The caliper complies with DIN 862, ensuring standardised geometry and interchangeability for caliper‑based checks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Digital Radius Caliper With 0.01mm Resolution, Stainless Steel Body, Battery Powered, Supplied In Case - Metav IndustryLine
Take advantage of precise radius measurement with a compact, workshop-ready instrument that combines a 3–100 mm measuring range, a 0.01 mm digital resolution and a robust hardened stainless‑steel build for reproducible results; order directly via Metav Werkzeuge or consult our specialists if additional information is required. Digital Radius Caliper M240.092.N — 3–100 mm range, 0.01 mm resolution (Metav IndustryLine) Digital Radius Caliper M240.092.N provides fast, repeatable measurement of arcs and radii for workshop inspection and small‑parts production. Digital display with 0.01 mm resolution Measuring range 3–100 mm Hardened stainless‑steel construction RB 5 data output for external transfer Accurate readings for fine mechanical work The instrument delivers a 0.01 mm display resolution (0.0005 in), making it suitable where small deviations matter. With a measuring span from 3–100 mm, the caliper sits in the compact category for precision tasks: its proportions and stiffness favour repeatable contact on small radii and curved surfaces. The clear digital readout reduces interpretation errors associated with a nonius and speeds up routine checks in the workshop or during incoming inspection. The device is particularly useful where quick verification of fillets, edge radii and formed contours is required. Seamless digital workflow and traceable outputs Equipped with an electronic display featuring ON/OFF, ZERO, UNIT and HOLD keys, the tool supports fast set‑up and stable value capture. The built‑in RB 5 data output permits straightforward export of measured values to data collection systems or handheld dataloggers, simplifying documentation and reducing transcription errors. For production environments that aim to close the loop between shop‑floor measurement and digital records, this connectivity accelerates quality checks and supports consistent process control. Robust design for everyday use and long service life Constructed from hardened stainless steel with a metal housing, the caliper resists routine wear and corrosion in industrial atmospheres. The solid build and balanced feel (approx. 0.43 kg) assist in steady handling and repeatable contact pressure during measurements. Delivered to factory standard (Werksnorm), the instrument is intended for dependable everyday use in machine shops, toolrooms and quality labs where a durable hand tool must deliver reliable results without frequent replacement. For precise radius inspection and professional purchasing advice on the Metav IndustryLine digital radius caliper, contact Metav Werkzeuge for tailored assistance and supply details. Technical data Article number: M240.092.N GTIN: 4054469160412 ECLASS: 21170344 Label: Digital-Radius-Messschieber, 3-100 mm, 3 V INOX, Werksnorm Facts Measuring range: 3–100 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.43 kg Power supply: 3 V Special features Material: hardened stainless steel, metal housing Display: ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Intended use: measurement of arcs and radii (radius measurement) FAQ What measuring range does the instrument cover? The caliper covers a measuring range of 3–100 mm, making it suitable for compact radius and arc measurements in workshops and inspection settings. What resolution and accuracy are provided? Display resolution is 0.01 mm (0.0005 in). As an orientation, standard digital calipers following DIN 862 typically work to an error boundary of ±0.02 mm up to 100 mm; the device’s fine display supports close tolerance checks in routine use. Can the tool transfer measurements to external systems? Yes. The unit includes an RB 5 data output for external transfer of measured values to data loggers or collection systems, simplifying traceability and documentation. Which measurement tasks is it best suited to? Its compact geometry and stiffness make it ideal for measuring fillets, small radii, internal and external arcs, and other fine mechanical features where control of contact and repeatability are essential. What is the construction and how does that help in daily use? The instrument is made from hardened stainless steel with a metal housing, offering resistance to wear and environmental effects and ensuring a stable feel for repeatable measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm External Measuring Jaw Insert For Digital Carbon Fibre Caliper, 8mm Beak Thickness - Metav IndustryLine
Benefit from the carbon‑fibre lightness and a precise 100 mm external measuring length that keep repeatability high and handling effortless; the low mass and rigid profile reduce measurement error for small components. Order the (M217.364.1 100 mm external jaw insert) directly via (Metav Werkzeuge) or ask our consultants if needed. M217.364.1 — Carbon‑fibre 100 mm external jaw insert for digital universal calipers (Metav IndustryLine) M217.364.1 is a dedicated external measuring jaw insert designed to convert a digital universal caliper into a lightweight, rigid tool for workshop and fine‑mechanical external measurements. Carbon‑fibre construction for low weight 100 mm external measuring length Compatible with 8 mm jaw thickness Precision oriented for workshop calipers Engineered for reproducible external measurements The carbon‑fibre construction delivers a favourable stiffness‑to‑weight ratio so that each contact requires less handling effort while preserving stability. The 100 mm measuring length is optimised for micro and workshop tasks where repeatability matters more than extended reach; the reduced mass limits deflection and vibration during contact, giving a consistent external measuring jaw that supports reliable dimensional control in serial checks. The insert is produced to fit calipers with a jaw thickness of 8 mm, ensuring a secure mechanical interface without modifying the base instrument. Ideal choice for micro‑range workshop work Classified in the micro range (up to 100 mm), this insert suits fine mechanical assemblies where compact geometry and high positional accuracy are required. The geometry and material are chosen to assist one‑handed measurement routines common in maintenance, toolmaking and small‑part inspection: the lightness shortens cycle time per measurement while the rigid profile helps maintain alignment on curved or small surfaces. Compatibility with digital universal calipers allows seamless integration into existing metrology workflows, improving throughput without the need for additional heavy fixturing. Practical durability and clear operational advantages At approximately 0.2 kg and with an overall length of 100 mm, the insert balances low weight with a robust feel for daily use. Carbon‑fibre resists corrosion and reduces the risk of surface marking compared with some metallic alternatives, supporting longer service life in mixed workshop environments. The design focusses on a single, measurable benefit per operation: faster handling and fewer retakes. For routine external checks on components, this translates directly into time savings and fewer inspection discrepancies during repetitive tasks. Contact Metav Werkzeuge to confirm fitment and secure the M217.364.1 carbon‑fibre 100 mm external jaw insert for your digital universal calipers Technical data Article number: M217.364.1 GTIN: 4054469183244 Brand: Metav IndustryLine Facts Overall length: 100 mm Weight: 0.2 kg Width: 16 mm Special features Material: carbon‑fibre Fits calipers with jaw thickness 8 mm Application: external and internal measurement compatibility Category: workshop caliper accessory FAQ Is this insert compatible with standard digital universal calipers? The insert M217.364.1 is designed for digital universal calipers and fits models with a jaw thickness of 8 mm; compatibility should be confirmed against the caliper jaw profile. Does the insert include a calibration certificate? This accessory is supplied as a measuring jaw insert; no dedicated calibration certificate is included unless explicitly stated on the product page. What advantages does carbon‑fibre offer for measurement jaws? Carbon‑fibre reduces mass while maintaining rigidity, improving handling speed and reducing bending during contact, which benefits repeatability for workshop checks. Can the insert be used for internal measurements as well as external? The design primarily addresses external measurement tasks, though the overall geometry may support certain internal measurement workflows when paired with a suitable caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Insert for Internal Groove Measurement for Digital Carbon Fibre Caliper, 8mm Jaw Thickness - Metav IndustryLine
Take advantage of precise internal groove measurement with a lightweight, carbon-fibre construction and straightforward compatibility with digital workshop calipers; the accessory ensures stable readings in confined spaces. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. M217.367 — Insert for internal-groove measurement, 100 mm, carbon-fibre (Metav IndustryLine) A M217.367 insert engineered for accurate internal groove measuring on digital workshop calipers, offering a 100 mm measuring length and compatibility with 8 mm jaw thickness. 100 mm measuring insert for internal grooves Carbon-fibre construction for low thermal drift Compatible with calipers having 8 mm jaw thickness Lightweight 0.2 kg for easy handling Precision where space is limited The accessory converts a standard caliper into a specialised tool for internal groove measurement, enabling reliable checks in narrow bores and channels. Built from carbon-fibre, the insert reduces thermal expansion compared with metallic alternatives, which supports measurement stability during routine workshop use. With a 100 mm measuring length, the component is particularly suited to confined workpieces where repeatable positioning matters. The lightweight design keeps inertia low and simplifies one-person operation while maintaining a steady reference for the caliper sensor. Designed for repeatable workshop measurements The adapter fits to digital universal workshop calipers with a jaw thickness of 8 mm, providing a solid mechanical interface that keeps alignment consistent across successive measurements. Its 0.2 kg mass combines handling convenience with enough substance to avoid unwanted movement during contact measurement. Being an accessory for digital calipers, the part preserves the display resolution and electronic readout of the host instrument, allowing the user to retain the precision benefits of electronic measurement without adapting the measuring routine. Practical integration into quality workflows Classified for compact, micro-range applications up to 100 mm, this insert is ideal for workshop quality control tasks where internal grooves, slots and recesses must be verified quickly and reliably. The accessory supports straightforward inspection routines and fits seamlessly into inspection benches and portable measuring setups. For production environments that demand reproducible checks of groove geometry, the combination of carbon-fibre construction and purpose-shaped measuring faces reduces environmental influence and helps standardise results across shifts. For groove-specific measuring tasks, choose the Metav IndustryLine M217.367 insert and contact Metav Werkzeuge in Emmerich for tailored advice or ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M217.367 GTIN: 4054469183275 Manufacturer: Metav IndustryLine Facts Measuring length: 100 mm Measuring range minimum: 50 mm Weight: 0.2 kg Jaw thickness compatibility: 8 mm Width: 16 mm Special features Carbon-fibre construction Application: internal measurement Suitable for digital workshop calipers Category: workshop caliper accessory FAQ How is the insert mounted to a caliper? The M217.367 insert is designed to sit on calipers with an 8 mm jaw thickness, forming a secure mechanical interface that aligns the measuring faces for internal groove checks. Can the insert remain attached during general measurements? The accessory is intended for dedicated internal groove tasks; while attachment is mechanically stable, removal is recommended when performing standard outside measurements to avoid interference. Which caliper types are compatible with this accessory? Compatibility is with digital universal workshop calipers featuring an 8 mm jaw thickness; the insert preserves the caliper’s electronic readout and measuring functionality. Is the insert suitable for measuring deep slots and narrow grooves? Yes, the 100 mm measuring length and narrow profile make the accessory suitable for confined grooves and slots where direct access is limited. Does the carbon-fibre construction affect measurement stability? Carbon-fibre reduces thermal expansion compared with many metals, supporting more stable results in varying workshop temperatures when used with the caliper’s electronic display. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com