Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
1450mm Electronic Scale With Ø41mm Magnifier, Proximity Output, mm/inch Reset/Preset, Carbon Body, Supplied In Case - Metav IndustryLine
Take advantage of a long measuring range, light carbon construction and digital readout that streamlines large-format inspection. The combination of robust design and proximity data output supports efficient measurement workflows; order the measuring rule directly via Metav Werkzeuge or consult our advisors for specification matching. Measuring rule M838.718 — carbon, 1,450 mm range, digital readout (Metav IndustryLine) The Measuring rule M838.718 is a long-format, digitally equipped measuring rule designed for precise linear measurement of large components in workshop and inspection environments. Carbon-bodied rule, low weight and high stiffness 1,450 mm measurement range for large components Digital mm/inch display with 0.01 mm resolution Integrated Ø41 mm magnifier for fine readings Precise long-range measurement for workshop and inspection This long-format measuring rule delivers a measuring range of 0–1,450 mm with a resolution of 0.01 mm, enabling reliable readings across extended spans. The specified accuracy of 0.06 mm ensures measurements remain within tight tolerances over the full length, reducing the need for repeated checks and rework. The clear mm/inch display with Reset/Preset functions simplifies conversions and setup for different workflows, while the relatively low mass helps maintain steady handling during an extended inspection cycle. Seamless data integration to speed up traceability Equipped with a Proximity data output, the device supports straightforward integration into data-capture stations and inspection software, removing manual transcription and the associated error risk. The electronic readout and preset features enable quick switchovers between measurement tasks, and the power provided by a single 1x CR2023 battery keeps maintenance simple. These capabilities together increase throughput in serial inspection and support digital quality records without complex retrofit. Robust, lightweight design for repeatable handling Constructed from carbon, the rule combines stiffness with reduced weight, making it easier to manoeuvre over long components while maintaining measurement stability; the overall length is 1,720 mm, optimised to cover the measuring span plus end clearance. An integrated Ø41 mm magnifier enhances legibility for fine graduations, and the instrument is supplied delivered in a protective transport case, which helps preserve calibration and finish during storage and transit. The compact electronics and ergonomic form reduce operator fatigue, improving reproducibility over long measurement sessions. Suited to large-format tasks and reliable provenance Classified within the long-range segment, the device is intended for large components and assemblies where reach and repeatability matter: sheet-metal fixtures, housings and longer shafts benefit from this format. Backed by the Metav quality filter in Emmerich, this product forms part of an offering that brings industrial-grade precision to workshops and production lines, combining proven technical performance with dependable supply and service. The practical result is fewer measurement interruptions and a smoother production flow. Contact Metav Werkzeuge for a tailored quote or specification sheet citing SKU M838.718 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M838.718 GTIN: 4061905449079 Manufacturer: Metav IndustryLine Facts Measuring range: 0–1,450 mm Overall length: 1,720 mm Resolution: 0.01 mm Accuracy: 0.06 mm Weight: 3.7 kg Magnifier diameter: Ø41 mm Battery: 1x CR2023 Special features Material: Carbon Digital mm/inch display with Reset/Preset Proximity data output for integration Delivered in a protective transport case Digital electronic readout FAQ How accurate is the Measuring rule M838.718 for long-span checks? The measuring rule M838.718 from Metav IndustryLine offers an accuracy of 0.06 mm across its 0–1,450 mm measuring range, suitable for workshop-level tolerances on large components. Can the device interface with inspection software or data loggers? Yes, the measuring rule includes a Proximity data output that enables connection to compatible data-collection systems for automated logging and traceability. Is the display switchable between metric and imperial units? The electronic readout supports mm/inch and features Reset/Preset controls, allowing quick switching between unit systems and fast setup for different tasks. What protection is provided for transport and storage? The instrument is supplied delivered in a protective transport case to safeguard the rule and electronics during transit and storage, preserving measurement consistency. What materials and handling benefits does this rule provide on the shop floor? Made from carbon, the rule balances stiffness and reduced weight, improving handling for long-span measurements; the integrated Ø41 mm magnifier aids precise reading of graduations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14–200mm Digital Internal Caliper Long Jaw Preset Display Stainless Steel Plastic Case - Metav IndustryLine
Take advantage of the long 75 mm jaw and the digital preset function to speed up internal dimension checks while keeping reproducibility high; the stainless, hardened construction ensures durability in workshop environments. Order the Digital internal caliper M240.023.N directly via Metav Werkzeuge or ask our consultants if needed. Digital internal caliper M240.023.N – 14–200 mm, long jaw 75 mm (Metav IndustryLine) Digital internal caliper M240.023.N offers precise internal measurements for workshop quality control and production inspection, optimised for repeatable checks in metalworking and assembly operations Long 75 mm jaw for deep inside measurements Digital display with ON/OFF and SET/PRESET Stainless hardened steel with metal housing Delivered in protective case, works standard included Reliable precision for everyday workshop control Classified in the Standard range (maximum measuring length 14–200 mm), this instrument delivers the sweet spot between reach and stiffness required in machine and metalworking environments. The instrument’s 0.01 mm resolution on the digital readout supports routine quality control tasks with clear, numeric readouts that reduce interpretation errors and speed up inspection cycles. The longer jaw keeps the measuring faces engaged in recesses and bore-like features, helping to maintain consistent contact geometry and minimise measurement scatter. This leads to fewer re-measures and a smoother production flow when integrated into standard inspection routines. Faster checks thanks to preset and clear digital controls The electronic display is fitted with practical keys — ON/OFF and SET/PRESET — so common reference positions can be stored and reused, cutting set-up time for repeated tasks. The instrument is powered by a 3 V system and provides a data output (RB 5) for simple transfer to data-logging devices or quality software, enabling streamlined documentation in production environments. Presetting a reference dimension before a batch run reduces operator steps, increasing throughput while maintaining reliable traceability of measured values. Robust build designed for workshop use Constructed from stainless, hardened steel with a metal housing, the caliper resists everyday knocks and resists corrosion in workshop atmospheres. The long jaw (75 mm) is specifically shaped to reach into deeper bores and recesses without compromising rigidity. The tool ships in a protective case to assist safe transport and storage and is supplied to works standard (Werksnorm), reflecting factory-checked conformity before dispatch. The instrument’s 0.6 kg mass contributes to a feeling of solidity in the hand, helping to stabilise measurements where a firmer grip is required. Practical application and operator guidance This digital internal caliper is optimised for internal dimension control tasks in machine shops, jig production and assembly inspection where consistent, repeatable results are essential. The SET/PRESET feature is useful for checking batches against a go/no‑go dimension or for rapid verification during mounting and alignment operations. The digital readout simplifies readings under workshop lighting and the data output option supports integration into routine documentation workflows. For users less familiar with electronic calipers, presetting a zero position on a gauge block or reference plug is recommended to establish a consistent baseline for subsequent checks. For dependable internal measurement capability from the Metav IndustryLine, contact Metav Werkzeuge in Emmerich to order the M240.023.N or request tailored advice from our consultants at info@metav-werkzeuge.com Technical data SKU: M240.023.N GTIN: 4054469159874 Category: Messschieber Facts Measuring range: 14–200 mm Jaw length: 75 mm Resolution: 0.01 mm Weight: 0.6 kg Power supply: 3 V Data output: RB 5 Special features Material: stainless, hardened steel; metal housing Digital display with ON/OFF and SET/PRESET Long jaw optimised for internal measurements Delivered in protective case for transport Supplied to works standard (Werksnorm) FAQ What measuring tasks is this caliper designed for? The Digital internal caliper M240.023.N from Metav IndustryLine is designed primarily for precise internal dimension checks within the 14–200 mm range and for applications where a longer jaw is needed. What accuracy and resolution does the instrument offer? The instrument provides a digital resolution of 0.01 mm, suitable for standard workshop quality control where clear numeric read‑outs and repeatable readings are required. Is the caliper supplied ready for use out of the box? The Digital internal caliper M240.023.N is delivered to works standard and shipped in a protective case; basic set-up such as battery insertion and zeroing on a reference is required before the first measurement. How is measurement data exported from the caliper? This instrument offers a data output labelled RB 5 to enable connection to compatible data‑logging or quality systems for straightforward transfer of measured values. Which materials and environments is the caliper suited to? With its stainless, hardened steel construction and metal housing, the M240.023.N is suited to workshop and production environments where corrosion resistance and mechanical robustness are needed Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Digital Caliper Inductive System, IP67, 0.01 mm Resolution, Four-Function, Supplied in Case - Metav IndustryLine
Combining IP67 ingress protection with an inductive measuring system and a fine 0.01 mm display, this caliper provides dependable workshop measurements and long-term resistance to dust and moisture. Its stainless steel construction and locking screw ensure stable contact and repeatable results during production checks. Order the caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper 150 mm, IP67, inductive system (DIN 862) — Metav IndustryLine The Digital caliper 150 mm, IP67, inductive system (DIN 862) is a robust, workshop-ready instrument for precise external, internal, depth and step measurements in standard machine‑shop applications Inductive measuring system, DIN 862 IP67 protection for wet and dusty areas 0.01 mm resolution with mm/inch conversion Four measurement functions plus depth gauge Reliable, shop‑floor measurement with sealed construction The instrument combines an inductive system with full sealing to IP67, making it suited to harsher production environments where coolant mist or dust is present. The measuring slide runs on hardened guides in a stainless steel body, which reduces wear and keeps the instrument stable during frequent use. The 0.01 mm display permits fine readout for standard quality control tasks while the locking screw secures the jaws for repeat checks. This construction translates into fewer re‑measurements and more consistent output in daily workshop routines. Efficient handling and versatile measuring options With a measuring range classified in the Standard category for calipers, the gauge balances reach and rigidity for common tasks such as component inspection and assembly checks. The instrument provides four measurement functions (external, internal, step and depth) and a dedicated depth gauge for grooves or recesses, plus an easy mm/inch toggle and MODE/0/ON/OFF keys for straightforward operation. The compact weight and ergonomic jaws enable rapid single‑handed measuring and fast transfer of results into production protocols, reducing set‑up time on repetitive tasks. Industry conformity and practical features for quality workflows Compliance with DIN 862 gives a clear normative reference for measuring practice and helps integrate the instrument into inspection routines. The stainless steel (INOX) construction supports corrosion resistance and long service life, while the robust slide and locking mechanism ensure measurement stability. For traceable routines, this digital caliper fits routine dimensional checks and incoming inspection tasks where durability and fast readability are essential. Technical advisors are available for specification matching and application advice to align the instrument with specific production needs. For workshop‑ready precision with IP67 protection, contact Metav Werkzeuge in Emmerich to arrange procurement or obtain tailored technical advice. Technical data Article number: M216.181 GTIN: 4054469146331 Category: Messschieber Measurements & figures Measuring range: 0–150 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Weight: 0.4 kg Protection class: IP67 Tariff number: 90173000 Special features Inductive measuring system Compliance: DIN 862 Four measurement functions: external, internal, step, depth Depth gauge included Locking screw for repeatable positioning Material: stainless steel (INOX) Digital display with MODE, mm/inch and 0/ON/OFF keys FAQ What resolution and readout does the caliper provide? The Digital caliper 150 mm, IP67, inductive system (DIN 862) provides a 0.01 mm resolution on the display and an inch mode with 0.0005 in readout. Is the caliper suitable for damp or coolant‑exposed workplaces? Yes—the caliper’s IP67 protection rating makes the Metav IndustryLine digital caliper resistant to dust ingress and temporary immersion, supporting safe use in damp production environments. Which types of measurements are possible with this instrument? External and internal dimensions, step measurements and depth readings are all covered; the caliper features four measurement functions and an integrated depth gauge for versatile inspection tasks. Is the construction corrosion‑resistant for longer service life? The caliper is manufactured from stainless steel (INOX), providing good corrosion resistance suited to routine shop use and extending service life under standard working conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150 mm Digital Caliper With Small Tips, Metal Housing, 0.01 mm Resolution, Battery Operated, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 5–150 mm measuring range, 0.01 mm resolution and a hardened stainless-steel metal housing for reliable, workshop-grade measurements. Order the caliper directly via Metav Werkzeuge or contact the technical team for integration advice. M240.024 Digital Caliper (5–150 mm) by Metav IndustryLine — Hardened Stainless Steel, Metal Housing The M240.024 Digital Caliper is a standard-range precision instrument for workshop and machine‑shop metrology, offering a robust metal housing and a clear digital readout for repeatable dimensional checks. Measuring range 5–150 mm Resolution 0.01 mm for precise checks Hardened stainless-steel metal housing RB 5 data output, ON/OFF and SET/PRESET Accurate measurements that speed up inspection This caliper provides a measuring range of 5–150 mm with a readout resolution of 0.01 mm, placing it firmly in the standard category for general machine‑shop and metal‑working tasks. The fine display step makes comparative and pass/fail checks straightforward, while the compact design supports quick handling for repetitive measurements. As a result, throughput in quality control can be improved since each measurement is both rapid and traceable. Robust construction for daily workshop use Built with hardened stainless steel and a protective metal housing, the tool resists the knocks and contaminants common in industrial environments. The small jaw geometry (noted in the product description) enables access to narrow features and internal profiles without sacrificing stability. A lightweight feel at approximately 0.4 kg keeps the instrument manoeuvrable during extended use, reducing operator fatigue and maintaining consistent measurement technique over long shifts. Digital features that integrate with production systems The clear digital display includes ON/OFF and SET/PRESET functions for fast zeroing and comparative measurement routines. Data transfer is supported via the RB 5 interface, allowing straightforward connection to data loggers or SPC stations for documentation and process control. These capabilities turn a handheld caliper into a reliable node in a larger quality‑assurance workflow, helping to reduce documentation errors and save time at the inspection stage. For dependable workshop precision and seamless data capture, choose the Metav IndustryLine M240.024 — contact Metav Werkzeuge in Emmerich for purchasing or for specific integration guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M240.024 GTIN: 4054469112633 Manufacturer: Metav IndustryLine ECLASS: 21170344 Numbers / Core technical data Measuring range: 5–150 mm Resolution / display: 0.01 mm Power supply: 3 V Weight: 0.4 kg Tariff number: 90173000 Special features / Versions Material: hardened stainless steel, metal housing Digital readout with ON/OFF and SET/PRESET buttons Data output: RB 5 Small jaw geometry for narrow features FAQ What measurement range does the caliper cover? The M240.024 digital caliper covers a range from 5 to 150 mm, making it suitable for standard workshop and machine‑shop tasks. What resolution and display features are available? The instrument offers a 0.01 mm resolution and a digital display with ON/OFF and SET/PRESET functions for zeroing and comparative checks. Can measurement data be exported? Yes. The caliper includes an RB 5 data output for connection to data loggers or SPC systems to streamline documentation. Is the caliper suitable for harsh workshop environments? The caliper is manufactured from hardened stainless steel and housed in metal to withstand everyday workshop conditions while maintaining measurement reliability. Does the caliper require any special calibration on delivery? The caliper is supplied ready for routine use with factory zeroing and preset functions; any traceable calibration requirements should be discussed with Metav Werkzeuge if needed. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Built-In Digital Caliper Color 2.4" Touchscreen, Wireless USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Robust stainless‑steel construction, a long 0–1500 mm measuring range and both Wireless + USB data output ensure reliable production measurements with traceable results; the instrument is supplied fully calibrated to ISO 17025 with a calibration certificate. Benefit from the integrated colour touchscreen for fast readback and order the caliper directly via Metav Werkzeuge or consult our specialists for system integration. Built‑in digital caliper — 2.4" colour touchscreen, Wireless + USB (Microtech Metrology) The Built‑in digital caliper is an embedded long‑range measurement solution for machine integration and shop‑floor inspection, offering a 0–1500 mm range and industrial‑grade connectivity. Colour 2.4" touchscreen readout Wireless + USB data output ISO 17025 calibrated with certificate 1,500 mm measuring range IP54 stainless steel construction Precise, traceable measurements for large components This long‑range instrument delivers dependable results for sizeable workpieces thanks to its 0–1500 mm measuring range, which places it in the Long class (1,000–2,000 mm). The calibrated electronics provide a standard resolution of 0.01 mm and an accuracy of ±0.05 mm, enabling routine quality checks that meet industrial tolerances. Supplied fully calibrated to ISO 17025, the device includes a traceable calibration certificate, reducing setup time for quality documentation and simplifying integration into ISO‑compliant inspection routines. Faster data capture and seamless integration with production systems Equipped with a 2.4" touchscreen and both Wireless + USB data outputs, the unit accelerates measurement workflows by removing manual transcription. The colour display makes readings and menus intuitive on the shop floor, while wireless transmission supports mobile data collection and remote logging; USB provides a direct wired option for PLCs or PCs. As a built‑in model it is designed for panel or machine mounting, allowing direct installation into automated setups or gauging stations without the need for additional adapters. Durable design and practical workshop benefits Constructed from stainless steel and rated IP54, the device resists dust and water spray typical of industrial environments and is easy to maintain. The long beam requires attention to straightness and support during handling; when used on larger parts the increased stiffness of the profile preserves reproducibility over the full stroke. Delivered ready for use with a calibration certificate, this instrument reduces downtime and provides a reliable basis for process control and incoming inspection across medium to heavy‑duty applications. For specification advice or procurement of Microtech Metrology built‑in calipers, contact Metav Werkzeuge in Emmerich for tailored guidance and ordering: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 142515140 GTIN: 4061905036576 Manufacturer: Microtech Metrology ECLASS: 21170344 Product type: Built‑in digital caliper Facts Measuring range: 0–1500 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Display size: 2.4" colour touchscreen Protection class: IP54 Special features Wireless + USB data output Stainless steel construction ISO 17025 calibration and certificate included Long‑range design for large components Built‑in version for machine or panel integration FAQ Is the caliper supplied with a calibration certificate? Yes. The built‑in digital caliper from Microtech Metrology is delivered fully calibrated to ISO 17025 and includes the calibration certificate with the instrument. What measuring range and accuracy can be expected? The instrument covers 0–1500 mm with a resolution of 0.01 mm and an accuracy of ±0.05 mm, suitable for long‑range shop‑floor inspections and fixture measurements (SKU 142515140). Can the device be connected to a PC or data logger? Yes. The unit supports Wireless + USB data output for direct connection to PCs, data loggers or PLCs, and the colour touchscreen simplifies configuration for each interface. Is the caliper suitable for industrial environments? Built from stainless steel and rated IP54, the caliper withstands typical shop‑floor conditions such as dust and splashes; its robust design suits production and inspection areas. Does the built‑in design require special mounting? The built‑in format is intended for panel or machine integration; appropriate support along the beam is recommended for long‑range measurements to preserve stiffness and reproducibility. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1500mm Built-In Digital Caliper Colour 2.4" Touchscreen, USB/Wireless, ISO 17025 Calibrated - Microtech Metrology
The combination of a 1,500 mm measuring range, ISO 17025 calibration and wireless data transfer ensures reliable, traceable results for large-scale inspection tasks; the aluminium construction keeps the instrument lightweight for installation and handling. Order the built-in caliper directly via Metav Werkzeuge or ask our consultants if needed. Built-in caliper — Digital caliper with 1,500 mm range and colour touchscreen (Microtech Metrology) A built-in caliper designed for long-range workshop and production measurements, offering wireless and USB data transfer plus an ISO 17025 calibration certificate for traceable results 1,500 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibration certificate included Reliable long-range measurement for large components The instrument addresses the demands of larger assemblies by providing a 1,500 mm measuring span that is classified in the Long category (1,000–2,000 mm), where profile stiffness and repeatability become decisive. The design balances reach and rigidity so that measurements across longer jaws remain reproducible; this is particularly relevant for fixture construction, housings and machine components that require consistent dimensional control over an extended length. The aluminium construction contributes to manageable weight without sacrificing stability. High-resolution digital readout and seamless data capture Equipped with a 2.4" colour touchscreen and a display resolution of 0.001 mm, the device delivers fine graduated readouts suitable for precise workshop checks and production spot checks. The dual data interfaces (wireless and USB) permit straightforward connection to logging systems or inspection software, reducing transcription errors and speeding up quality-control cycles. The touchscreen simplifies mode selection and unit changes, while the high display clarity supports fast, unambiguous readings on the shop floor. Traceable calibration and practical inspection accessories The instrument is supplied fully calibrated under ISO 17025, and a calibration certificate is included to document traceability for internal audits and supplier acceptance. This formal proof of calibration supports quality management processes and reduces the need for immediate external verification. An HD microscope with 7" LED display is provided as part of the scope, enabling magnified visual inspection of fine features next to dimensional checks and easing correlation between optical inspection and metrological results. Robust design adapted to industrial workflows Constructed from aluminium for a favourable strength-to-weight ratio, the caliper is suitable for integration where a built-in measuring solution is required. The combination of solid mechanical guidance and a digital transducer offers a dependable measuring chain for production environments. The instrument’s data outputs and calibration pedigree make it suitable for shop-floor traceability and integration into existing quality-control procedures, while the included inspection accessory supports multi-faceted assessment of parts. Discuss project requirements with Metav Werkzeuge — technical consultation and ISO 17025 documentation are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 142515158 GTIN: 4061905036910 Manufacturer: Microtech Metrology ISO 17025 calibration: included Facts Measuring range: 0–1500 mm Resolution / display increment: 0.001 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Special features Digital built-in caliper for long-range measurement HD microscope with 7" LED display included Aluminium construction ISO 17025 calibration certificate supplied FAQ What is the maximum measuring range of the caliper and how is it classified? The built-in caliper offers a measuring range of 0–1500 mm and is classified in the Long category (1,000–2,000 mm), making it suitable for larger fixtures, housings and assembly components. What accuracy and resolution can be expected from this instrument? The caliper provides a display resolution of 0.001 mm; the supplied ISO 17025 calibration confirms traceable performance for documented quality-control use. How can measurement data be exported from the device? Measurement data can be transferred via wireless connection or USB, enabling integration with inspection software and data-collection systems for streamlined logging and analysis. Is any additional equipment included for inspection tasks? An HD microscope with 7" LED display is included, allowing visual inspection alongside dimensional checks to support comprehensive part evaluation. Who manufactures this instrument and what documentation is provided? The instrument is supplied by Microtech Metrology and comes with an ISO 17025 calibration certificate and traceability documentation; the SKU is 142515158 for order and reference. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1500mm Built-In Digital Caliper With 10x Magnifier, IP67 - Microtech Metrology
Take advantage of the combination of long-range capability, industrial ingress protection and fine display resolution for predictable, integration-ready measuring in production environments. Order the device directly via Metav Werkzeuge or consult our specialists for system integration and mounting advice. Built-in digital caliper — flush-mount design, 0–1500 mm, IP67 (Microtech Metrology) Built-in digital caliper for machine integration and long-range dimensional control within production and assembly systems. Digital display with Swiss Electronics module IP67 protection for dust and water resistance 0–1500 mm measuring range 10x magnification lens for clear reading Long-range precision engineered for large components The unit is designed for reliable measurement across an extended span, classified as a long-range caliper suitable for applications up to 0–1500 mm. The geometry and installation-ready form factor reduce handling time during in-line inspections and minimise deflection effects commonly encountered with longer measuring axes. With a resolution of 0.001 mm and a stated accuracy of ±0.04 mm, the instrument offers a useful combination of fine reading capability and practical repeatability for machine shops, fixture set-ups and component assembly tasks. Where absolute micrometre-level traceability is not required, this balance improves throughput without sacrificing verifiable dimensional control. Industrial-ready mounting and readable output for automated processes The flush-mount construction simplifies integration into fixtures and machines, while the Swiss Electronics display module provides a clear digital readout intended for both manual checks and signal interfacing. Rated IP67, the device withstands coolant spray and workshop dust, reducing downtime related to environmental exposure. The integrated 10x magnifier enhances visual verification of the scale and readout during setup and maintenance, which aids fast decision-making at the production line. These design choices support automation-friendly workflows by combining robustness with easily interpreted measurement data. Practical benefits for quality control and process stability Engineered for repeated use in production, the caliper supports consistent measurement routines that feed into quality assurance steps. The long span capability reduces the need for multiple gauge changes on larger parts, saving set-up time and lowering cumulative measurement uncertainty across an inspection sequence. The device’s combination of high resolution and durable construction helps maintain process stability: fewer interruptions for cleaning or repairs and clearer results for documentable inspections. For integrators and quality engineers, this translates into measurable gains in efficiency and fewer rejected batches due to measurement variability. Contact Metav Werkzeuge today for integration guidance and secure the Microtech Metrology built-in digital caliper (SKU 142515151) for robust, long-range measurement in production environments Technical data Article number: 142515151 GTIN: 4061905457906 Brand: Microtech Metrology Category: Digital caliper (built-in) Display: Swiss Electronics Core data Measuring range: 0–1500 mm Resolution: 0.001 mm Accuracy: ±0.04 mm Magnification: 10× Protection class: IP67 Special features Flush-mount construction for machine integration Digital output, integration-capable display Robust design for workshop and industrial environments Suitable for long-span component measurement FAQ How is the caliper suited to measuring large components? The built-in digital caliper provides a measuring range of 0–1500 mm, offering extended reach for large fixtures and assemblies while its design reduces deflection over long spans. What reading precision and overall accuracy can be expected? Resolution is 0.001 mm for fine readout increments; the declared system accuracy is ±0.04 mm, which defines the practical tolerance for production checks. Is the device protected against coolant and dust in workshop environments? Yes, the instrument is rated IP67, making it resistant to dust ingress and temporary immersion, suitable for many industrial conditions. Can the display be read easily during machine integration? The unit uses a Swiss Electronics display and includes a 10× magnifying lens for clear visual checks; the display is also suitable for electrical interfacing where required. Is the product suitable for automated inspection systems? The flush-mount design and digital output make the caliper well suited to integration into automated inspection or in-line control systems. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1500mm Digital Caliper 200mm Jaws Fine Adjustment Stainless Steel, Factory Standard 0.11mm, with ON/OFF mm/inch HOLD PRESET - Metav IndustryLine
Take advantage of a long 1,500 mm measuring range, hardened stainless steel construction and a digital readout with RB 5 data output to speed up large-part inspections while keeping reproducibility high. Order the instrument directly via Metav Werkzeuge or request advice from our consultants for production-ready measurement solutions. Digital Caliper M217.056 — 1,500 mm long-range caliper with fine adjustment (Metav IndustryLine) The Digital Caliper M217.056 is a long-range, hardened stainless steel digital caliper designed for large-component measurement and shop-floor inspection in manufacturing and toolmaking environments. Long 1,500 mm measuring range Fine-adjustment thumb screw Hardened stainless steel construction Digital display with mm/inch and preset Reliable long-range precision for large assemblies This long-range instrument delivers a measuring span of 1,500 mm, making it suitable for components that would otherwise require multiple shorter tools or repeated setups. The robust hardened stainless steel beam reduces bending and wear across the full length, which improves repeatability when measuring machine frames, housings or large fixtures. With a jaw length of 200 mm, the geometry supports secure, stable contact on bigger workpieces while the factory Werksnorm 0.11 mm gives a clear reference for expected performance during routine workshop checks. Durable handling and controlled measuring force Designed with a fine-adjustment thumb screw, the device permits careful approach to the measured surface so delicate parts are not overstressed and readings remain consistent. The fully hardened stainless construction resists corrosion and abrasion, extending service life in busy production environments. Lightweight ergonomics for two-person handling are balanced against the stiffness required to avoid deflection; this trade-off reduces measurement uncertainty and minimises rework or scrap due to inaccurate gauging. Digital workflow and traceable readings The integrated digital display offers standard functions (on/off, mm/inch, zero/ABS, hold, tolerance and preset) to streamline inspection routines and avoid transcription errors. Resolution is 0.01 mm (and 0.0005 in for imperial), enabling clear readout for typical workshop tolerances while saving time compared with analogue scales. The RB 5 data output enables connection to data loggers or SPC systems for fast process documentation and reduces manual input errors, supporting a lean metrology workflow and faster throughput. Practical features for inspection and storage The caliper is supplied without a probing tip to favour universal jaw measurements and is fitted for a standard 3 V power source. A factory calibration standard is applied and noted as Werksnorm; the instrument’s configuration and controls are aimed at straightforward integration into existing measurement benches. Supplied with appropriate transport protection, the unit is ready for safe storage and transfer between inspection stations without additional packaging effort. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine Digital Caliper M217.056 into production measurement routines and ensure reliable long-range precision for large-format components Technical data Article number: M217.056 GTIN: 4054469110998 EClass: 21170344 Tariff number: 90173000 Core figures Measuring range: 0–1,500 mm Maximum range (mm): 1,500 Jaw length: 200 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Power supply: 3 V Special features Material: hardened stainless steel Digital display: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Fine-adjustment thumb screw Data output: RB 5 Delivered without tip Factory standard: Werksnorm (0.11 mm) FAQ What measuring span does this caliper cover? The caliper covers a measuring range up to 1,500 mm, making the M217.056 suitable for large components and long-format inspection tasks. How precise is the digital readout? The instrument provides a resolution of 0.01 mm (0.0005 in) on the digital display; this resolution supports standard workshop tolerances and quick pass/fail checks. Can measurement data be exported to a PC or SPC system? Yes, the caliper includes an RB 5 data output for connection to data loggers or SPC systems to support digital documentation and process control. Is the caliper corrosion resistant for workshop use? The beam and jaws are made from hardened stainless steel, which improves resistance to corrosion and wear under normal workshop conditions. Does the device include any adjustment aid for delicate parts? A fine-adjustment thumb screw is fitted to allow controlled, repeatable contact pressure during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digital Caliper 300mm Jaw Length Fine Adjustment, Stainless Steel, With ON/OFF mm/inch Display, RB 5 - Metav IndustryLine
Combine 1,500 mm measuring reach, fully hardened stainless-steel construction and a precise fine-adjustment mechanism for reliable long-format measurements; order via Metav Werkzeuge or consult our specialists for application advice. M217.059 — digital caliper, 1,500 mm range, hardened stainless steel (Metav IndustryLine) The M217.059 is a long-range digital caliper designed for dimensional checks of large assemblies and heavy components in toolrooms, fixture production and heavy machining environments. Long 1,500 mm range for large assemblies Fully hardened stainless-steel construction Fine-adjustment thumb screw for controlled positioning Digital display with mm/inch, preset and data output Measure large components with confidence and repeatability The long measuring span combined with a robust profile makes this caliper ideal when measurements must remain reproducible over extended lengths. The 1,500 mm range reduces the need for multiple setups and minimises transfer errors during inspection of housings, fixtures or long shafts. Built to resist workshop wear, the hardened stainless steel body preserves jaw geometry so that repeated checks retain their accuracy over time, supporting consistent quality control in production processes. Controlled positioning for precise readings A fine-adjustment thumb screw is integrated for accurate approach and gentle contact, reducing measurement scatter from operator handling. The instrument offers a 0.01 mm display resolution, enabling clear, comparable results for standard quality assurance tasks. The calibrated sliding action and rigid beam profile together reduce deflection during measurement, which is particularly important in long-range gauges where stiffness determines repeatability. Seamless documentation and workshop integration Equipped with an electronic readout and RB 5 data output, the caliper supports digital capture of values for statistical process control or traceable measurement records. The display includes mm/inch, ABS/0, HOLD, TOL and PRESET functions for flexible use in inspection routines and setup workflows. Power is supplied by a 3 V cell; the measurement system is optimised for straightforward interfacing with data collection systems, improving throughput and reducing transcription errors. For specification queries, application matching or to request a quotation for the Metav IndustryLine M217.059, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss exact requirements and delivery options Technical Data Article number: M217.059 GTIN: 4054469111049 eClass: 21170344 Tariff number: 90173000 Standard: Werksnorm (accuracy reference 0.11 mm) Facts Measuring range: 0–1,500 mm Resolution (display): 0.01 mm Resolution (inch): 0.0005 in Jaw length: 300 mm Power: 3 V Data output: RB 5 Special features Material: fully hardened stainless steel Digital functions: EIN/AUS, mm/inch, 0/ABS, HOLD, TOL, PRESET Fine-adjustment mechanism for controlled positioning Digital measuring system FAQ Is this caliper suitable for measuring large assemblies? Yes. The M217.059 digital caliper from Metav IndustryLine offers a 1,500 mm measuring range specifically for large-format components and long assemblies. What resolution and reference accuracy does the instrument provide? The display resolution is 0.01 mm and the instrument is supplied to a factory standard with a reference accuracy of 0.11 mm as stated in the Werksnorm. Can measurement data be exported for statistical recording? Yes. The M217.059 includes an RB 5 data output and common display functions (mm/inch, ABS/0, HOLD, TOL, PRESET) to facilitate connection to data-collection systems. What is the caliper constructed from and how does that help in the workshop? The caliper is made from fully hardened stainless steel, which maintains jaw geometry under workshop conditions and improves long-term repeatability for industrial use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digital Caliper Carbon Fibre Inductive System Replaceable Jaw Spring-Loaded Thumb Wheel IP65 - Metav IndustryLine
Take advantage of the combination of long-range reach, low-deflection carbon fibre construction and robust IP65 protection for reproducible measurements on large components; order the Digital Uni. Caliper M217.362 directly via Metav Werkzeuge or ask our consultants if needed. Digital Universal Caliper M217.362 — 1,500 mm carbon fibre, IP65 The Digital Universal Caliper M217.362 is a long-range, inductive workshop caliper designed for reliable measurements of large assemblies and tooling up to 1,500 mm. Carbon fibre 1,500 mm beam for low deflection IP65 dust- and splash-resistant design Inductive measuring system with RB6 data output Removable jaw and spring-loaded thumbwheel Reproducible measurements across long spans This long-range instrument is engineered for measurements up to 1,500 mm, placing it in the Long category for calipers. The inductive measuring system provides stable sensing along the entire beam, reducing the influence of contamination that affects mechanical readers. With a display resolution of 0.01 mm, operators gain clear, comparable values for external and internal dimensions on large components; this supports process consistency in fixtures, housings and large assemblies where repeatability matters. Lightweight stiffness and workshop resilience The beam is manufactured from carbon fibre, which combines low mass with high stiffness to limit sag over the full measuring length. Together with the IP65 rating, this construction means the instrument tolerates workshop environments while remaining easy to handle during two-person measurements or when mounted on supports. A removable jaw allows replacement or specialised jaw types, and the spring-loaded thumbwheel ensures gentle, consistent closing force to cut measurement variation caused by operator pressure. Clear results and industrial connectivity The caliper’s digital display supports mm/inch, Hold, Set, On/Off, 0/Inch and Data functions for versatile use; the 0.01 mm step size ensures readable resolution for workshop quality checks. Data are made available via RB6 output for direct logging into inspection systems or data collectors, while power is supplied by a 3 V CR 2032 cell for long service life between battery changes. Delivered in a transport case, the instrument is protected during storage and transfer, simplifying workshop logistics. Choose Metav IndustryLine’s carbon-fibre long caliper for consistent, low-deflection measurements over large parts — contact Metav Werkzeuge in Emmerich for personalised advice or to request a quote. Technical data Article number: M217.362 GTIN: 4054469183220 ECLASS: 21170344 Facts Measuring range: 0–1,500 mm Resolution (display): 0.01 mm Accuracy: 0.11 mm Jaw length: 100 mm Power supply: 3 V CR 2032 Special features Material: carbon fibre beam Protection: IP65 Measuring system: inductive Data output: RB6 Display functions: mm/inch, Hold, Set, On/Off, 0/Inch, Data Removable measuring jaw Spring-loaded thumbwheel Delivered in transport case FAQ What measuring range does the caliper cover? The Digital Universal Caliper M217.362 covers 0–1,500 mm and is classified as a long-range caliper suitable for large components and tooling. Is the instrument suitable for workshop use and humid environments? Yes — the carbon fibre beam combined with an IP65 rating provides resistance to dust and splashes, making it appropriate for standard workshop conditions. How can measurement data be transferred to a PC or logger? Data are exported via the RB6 output; the caliper uses an inductive measuring system that supports reliable digital transfer to compatible data collectors. Which display functions are provided for everyday measuring tasks? The instrument includes mm/inch switching, Hold, Set, On/Off, 0/Inch and Data buttons for flexible operation, with a display resolution of 0.01 mm; it is powered by a 3 V CR 2032 battery. Can the measuring jaw be replaced or adapted for special tasks? Yes, the product features a removable measuring jaw and a spring-loaded thumbwheel to enable jaw replacement and to ensure consistent contact force during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digital Caliper With Points, Fine Adjustment, Stainless Hardened, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 1500 mm measuring range, hardened stainless construction and a 0.01 mm digital resolution for reproducible large-format measurements; order this caliper via Metav Werkzeuge or contact the consultants for delivery and integration advice. M217.046 digital caliper — 1500 mm range, hardened stainless steel (Metav IndustryLine) The M217.046 is a long-range digital caliper designed for precise measurement of large components in workshop and fixture environments, supplied with a fine-adjustment mechanism and a comprehensive digital display. 1500 mm measuring range Hardened stainless steel beam Fine‑adjustment thumb screw Digital display with mm/inch and preset Accurate long-range measurement for large components The instrument is tailored to long-span measurements and classified as a long caliper, with a 1500 mm measuring range that bridges hand-held handling and workshop-scale inspection. With a display resolution of 0.01 mm, the device provides clear numeric readouts that reduce interpretation errors during serial checks. The combination of extended reach and fine numeric resolution enables faster, more reliable dimensional control on housings, large fittings and mounting plates where repeatability across the full span is essential. Robust construction that keeps measurements reproducible Constructed from hardened stainless steel, the beam and jaws resist wear and retain profile stiffness over repeated use. A dedicated fine adjustment screw allows controlled approach of the jaws to the workpiece, avoiding overshoot and reducing measurement scatter caused by manual thumb pressure. The extended jaw length of 200 mm supports stable clamping on broad faces and ensures consistent contact geometry for both internal and external measurements, improving reproducibility on larger parts. Digital features streamlining inspection workflows The integrated digital display includes ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET functions, making format changes and limit checks straightforward during routine inspection. Data output is available as RB 5, and the unit is powered by 3 V, enabling quick capture of measured values into downstream documentation or SPC systems where supported. These functions reduce manual recording, accelerate the inspection loop and help maintain an auditable measurement history without introducing additional processing steps. Practical suitability and Metav’s delivery assurance Engineered for heavy‑duty workshop use, the caliper suits applications such as fixture set‑up, large mould inspection and heavy machining quality control where a balance of reach and stiffness is required. Supplied under a workshop standard (Werksnorm) and shipped with handling provisions for oversize items, this tool forms a pragmatic choice for shops seeking dependable large-format metrology backed by a reliable supplier network. Metav’s offering combines an extensive product range with logistical experience from Emmerich, providing pragmatic support for industrial measurement needs. Contact Metav Werkzeuge for tailored advice on integrating the M217.046 into inspection routines and to arrange delivery direct from Emmerich for seamless workshop supply Technical data Article number: M217.046 GTIN: 4054469110844 Category: Calipers / Messschieber Facts Measuring range: 0–1500 mm Resolution: 0.01 mm Jaw length: 200 mm Weight: 15 kg Power: 3 V Special features Material: hardened stainless steel Display functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 Norm: Werksnorm 0.10 mm Shipping: oversize UPS eCl@ss: 21170344 TARIC: 90173000 FAQ What measuring range does this caliper cover? The long-format caliper covers a measuring range of 0–1500 mm, making it suitable for large components and assemblies. What level of resolution can be expected from the display? The digital readout provides a resolution of 0.01 mm, offering clear steps for standard workshop and production inspections. Is the caliper suitable for harsh workshop environments? The caliper is made from hardened stainless steel, which enhances resistance to wear and supports reliable measurements in demanding conditions. Which digital functions are available on the instrument? The unit features ON/OFF, mm/inch conversion, 0/ABS, HOLD, TOL and PRESET, and includes an RB 5 data output for integration into inspection workflows. Who supplies and supports this caliper? This long-range digital caliper is part of the Metav IndustryLine; Metav Werkzeuge can advise on delivery and application details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digital Precision Caliper With 150mm Sliding Jaw, mm/inch Display Werksnorm - Metav IndustryLine
This long-reach digital caliper combines a 1,500 mm measuring range, a lightweight aluminium profile and a movable jaw for versatile inspection of large components; order directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Workshop Digital Caliper M217.216 — 1,500 mm aluminium profile A Workshop digital caliper M217.216 designed for long-format measurements in machine shops, fixtures and heavy fabrication where reach and manageable handling are required Digital mm/inch display with zero function 1,500 mm measuring range for large components Lightweight aluminium profile for easy handling Movable measuring jaw for versatile measurements Measure large assemblies without sacrificing repeatability Long-range measurement capability is the primary strength here: the instrument is built for 1,500 mm spans while remaining light enough for one-person operation thanks to its aluminium profile. This combination reduces handling fatigue and helps to preserve alignment during transfer, which in turn improves repeatability across multi-point checks. The 150 mm jaw length supports deeper internal and step measurements on bulky housings and fixtures, so measuring large parts becomes feasible without switching to alternative, slower systems. Faster inspection workflow with clear digital readout A digital display with mm/inch selection, a zero function and simple ON/OFF control shortens the inspection loop and reduces transcription errors. The shown resolution of 0.1 mm (with inch readout as specified) provides a clear compromise between speed and usable workshop precision for fabrication and assembly control. Conforming to Werksnorm, the instrument offers a predictable baseline for routine quality checks; the direct readout and repeatable zeroing accelerate both spot checks and serial control tasks. Designed for workshop life and practical data transfer The movable measuring jaw expands the caliper’s application range without adding complex handling steps, enabling inside, outside and step measurements with the same tool. Robust mechanical guidance and corrosion-resistant surfaces are optimised for daily use in a busy environment, so downtime for maintenance is minimised and service intervals are extended. For traceable logging or digital inspection chains the unit includes RB 1 data output, facilitating connection to data capture devices and reducing manual recording work on the shop floor. Contact Metav Werkzeuge in Emmerich to discuss suitability of the Metav IndustryLine caliper for specific production tasks and to arrange delivery or technical consultation Technical data Article number: M217.216 Manufacturer: Metav IndustryLine Measuring range: 0–1,500 mm Material: Aluminium profile Norm: Werksnorm Customs tariff number: 90173000 Facts Resolution: 0.1 mm Display functions: ON/OFF, mm/inch, zero Jaw length: 150 mm Data output: RB 1 eClass: 21170344 Special features Digital display for quick readout Movable measuring jaw for flexible use Suitable for workshop and heavy‑duty measurement Robust construction for daily industrial use FAQ What measuring range does the caliper cover? The M217.216 workshop digital caliper covers a measuring range of 0–1,500 mm, making it suitable for large components and assemblies. What resolution and display functions are provided? The instrument provides a resolution of 0.1 mm and a digital readout with ON/OFF, mm/inch conversion and a zero setting to speed up successive measurements. Can the caliper be used for inside and step measurements? Yes, the movable measuring jaw and the 150 mm jaw length enable inside, outside and step measurements with the same device. Is data export possible from this caliper? The caliper includes an RB 1 data output for integration into data capture systems and to reduce manual recording. Which environments or applications is the caliper aimed at? This long‑range instrument is intended for machine shops, fixture builders and fabrication environments where one‑person handling of larger components and reproducible checks are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digital Werkstattmessschieber, 0,01mm, IP 65 - Metav IndustryLine
Das 1989 gegründete Vertriebsunternehmen von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem überzeugenden Preis. HIGHLIGHTS Messbereich: bis 1500mm Ablesung: 0,01mm Material: Kohlenstoff-Faser digitale Ausführung Datenausgang: Bluetooth Daumenstück gefedert Bereit für große Aufgaben Bis 1500mm bringt Reichweite und Komfort. Du erreichst weite Spannweiten mühelos. Das erleichtert die Arbeit an großen Teilen. Perfekt für Kontrolle, Service und Instandhaltung. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber. Die Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem vervorragenden Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie wissen nicht genau, ob dieses Werkzeug zu Ihrer Anwendung passt? Oder Ihnen fehlen noch wichtige technische Details? Kein Problem! Kontaktieren Sie uns – wir beraten Sie gerne. 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Eigenschaften: Marke: Metav IndustryLine Bezeichnung: Werkstattmessschieber Daumenstück gefedert Bestellnummer: M217.356.3 Fakten: Messbereich: 0 bis 1500mm Gewicht: 14,4kg Schnabellänge: 500mm Ablesung: 0,01mm Datenausgang: Bluetooth Ablesung in Inch/Zoll: 0,0005 IP-Schutz: IP 65 Ausführungen Ausführung: digital Material: Kohlenstoff-Faser Lieferung im Kasten Anzeige: mit mm/inch-, HOLD-, SET-, ON/OFF-, 0/INC- und DATA-Tasten Messsystem: induktiv Daumenstück gefedert Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Metav IndustryLine Messwerkzeug haben: Werkstattmessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
1500mm Digital Werkstattmessschieber, 0,01mm, IP 65 - Metav IndustryLine
Die hervorragenden Bewertungen von Metav Werkzeuge stehen für über 42.000 überzeugte Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Das wichtigste für Werkstattmessschieber Messbereich: bis 1500mm Ablesung: 0,01mm Material: Kohlenstoff-Faser Ausführung: digital Datenausgang: Bluetooth Daumenstück gefedert Mehr Spielraum für große Teile – bis 1500mm Mit einem Messbereich von bis 1500mm erreichst du auch große Teile. Du misst lange Profile und breite Platten bequem. Das spart Wege und Zeit. Ideal für Werkstatt, Montage und Wareneingang. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber. Fachhinweis: Führe Messungen immer unter gleichen Bedingung aus. Im Idealfall im einem Messlabor, das 20° Celsius vorhält. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Detailspezifikationen für digitalen Werkstattmessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstattmessschieber Daumenstück gefedert Bestellnummer: M217.356.2 Zahlen zum Werkzeug: Messbereich: 0 bis 1500mm Gewicht: 9,9kg Schnabellänge: 300mm Ablesung: 0,01mm Datenausgang: Bluetooth Ablesung in Inch/Zoll: 0,0005 IP-Schutz: IP 65 Besonderheiten Ausführung: digital Material: Kohlenstoff-Faser Lieferung im Kasten Digitalanzeige: mit mm/inch-, HOLD-, SET-, ON/OFF-, 0/INC- und DATA-Tasten Messsystem: induktiv Daumenstück gefedert Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Ferner darf man nicht vergessen zu prüfen, ob der Messschieber schon kalibriert sein muss. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden.
1500mm Digital Workshop Caliper 150mm Jaw, Carbon Fibre With Steel Measuring Faces, IP65 - Filetta
Combine the lightweight carbon construction with robust steel measuring faces and integrated Digimatic & Bluetooth output to secure reliable long‑range measurement across the workshop; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Digital workshop caliper Carbon 0–1500 mm (M910.349) — Bluetooth & Digimatic, IP65, Filetta A Digital workshop caliper Carbon 0–1500 mm engineered for long‑span measurements in demanding workshop environments, combining a low‑weight carbon main beam with steel contact faces for wear resistance and repeatability 0–1500 mm measuring range Carbon body with steel measuring faces Digimatic and Bluetooth data output IP65 protection with fine adjustment and lock Long‑reach measurement with controlled stiffness The caliper is built around a 0–1500 mm measuring range, placing it in the Long class suitable for metre‑scale components. The carbon fibre beam reduces overall mass while preserving profile stiffness, which limits sag and keeps measurements reproducible across the full travel. Steel contact faces on the jaws provide wear resistance where it matters, so contact surfaces remain true over repeated use. With an overall length of 1736 mm and a net weight of approximately 2 kg, the instrument balances reach and handling for two‑person workflows or fixed jig measurements without compromising on portability. Consistent precision, easy handling and workshop resilience Measurement electronics provide an resolution of 0.01 mm with a stated accuracy of ±0.16 mm, a combination targeted at robust workshop control rather than ultra‑micrometre lab work. A fine‑adjustment thumbwheel and a separate locking screw ensure setting and clamping are straightforward, while a controlled measuring force of 5–10 N helps reduce operator‑induced variation. The sealed housing meets IP65 protection, keeping out dust and spray, and the display offers mm/inch switching, ABS/INC zeroing and a reset/preset function. Power is supplied by a single CR2032 cell for extended standby life. Seamless data capture and transport protection Integrated Digimatic and Bluetooth output enables direct data collection into digital readout systems or wireless data loggers, simplifying quality documentation and integration into Industry 4.0 processes. The digital interface supports fast transfer of measurement points and reduces transcription errors in production or inspection routines. The caliper is supplied in a protective transport case for safe shipping and onsite movement, and its combination of low weight and solid jaw finish makes it suitable for heavy workshop use where ruggedness and connectivity are equally important. For long‑range workshop measurement from Filetta, contact Metav Werkzeuge in Emmerich for tailored technical advice and to arrange supply of the Filetta digital workshop caliper; email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: M910.349 Brand: Filetta Label: Digital‑workshop caliper Carbon 0–1500 mm and 150 mm jaw length Numbers / Core technical data Measuring range: 0–1500 mm Overall length: 1736 mm Jaw length: 150 mm Resolution: 0.01 mm Stated accuracy: ±0.16 mm Measuring force: 5–10 N Weight: 2 kg Battery: 1 × CR2032 Designs / Special features Carbon fibre main beam with steel measuring faces Digimatic and Bluetooth data output Digital display with mm/inch, ABS/INC, reset/preset functions Fine‑adjustment thumbwheel and locking screw IP65 protection class for dust and spray resistance Delivered in a protective transport case FAQ Is this caliper suitable for measuring large components such as machine housings or shafts? Yes. The Filetta digital workshop caliper with a 0–1500 mm range and a lightweight carbon beam is intended for metre‑scale components where long reach and manageable handling are required. How is data transferred from the instrument to a computer or data logger? Data can be output via the integrated Digimatic interface or wirelessly over Bluetooth, enabling direct capture into inspection software or portable data collection devices. What protection does the instrument offer against dust and coolant? The caliper has an IP65 rating, providing protection against dust ingress and low‑pressure water jets, suitable for typical workshop environments. Are the contact faces durable for frequent use on metal parts? Yes. The contact faces are made of steel to resist wear during repeated contact with metal components, maintaining measurement reliability over time. Does the delivery include a case and is the instrument ready to use? The product is supplied in a protective transport case and comes with its battery fitted; routine setup (zeroing/preset) is performed via the digital controls. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1500mm Digital Workshop Caliper Carbon Fiber With 300mm Jaws, IP65 Bluetooth - Filetta
Take advantage of the combination of a carbon‑fibre beam with steel measuring faces, a 0–1500 mm measuring range and robust IP65 protection for reliable large‑format workshop measurement; order this caliper via Metav Werkzeuge or consult our advisors for technical clarification. Filetta Digital Workshop Caliper M910.350 — Carbon‑fibre, 0–1500 mm, IP65 The Filetta Digital Workshop Caliper M910.350 is a long‑range precision caliper designed for workshop and production measurement of larger components up to 1,500 mm. Carbon‑fibre beam with steel measuring faces 0–1500 mm measuring range Digimatic and Bluetooth data output IP65 protection for harsh environments Reliable large‑range measurement for heavy workshop use The long‑range design delivers a 0–1500 mm measuring capability while remaining manageable in typical workshop workflows; classified in the Long category for calipers, this range bridges handheld convenience and extended reach for fixtures, housings and larger assemblies. The combination of a lightweight carbon‑fibre beam with hardened steel measuring faces reduces deflection while preserving durable contact surfaces, so repeatable external and step measurements are achievable across the full span. The specified display resolution of 0.01 mm supports fine increments, and the listed accuracy provides a clear expectation of measurement tolerance for shop‑level inspection. Industrial data transfer and practical controls for production lines Equipped with both Digimatic and Bluetooth outputs, the instrument supports wired collection and wireless integration into data logging workflows, enabling direct capture of readings into SPC or measurement software. The digital display offers mm/inch selection and ABS/INC modes, plus Reset/Preset convenience for quick zeroing and reference offsets. A dedicated fine‑adjustment and a locking screw permit controlled closing and stable clamping of the slider, reducing the risk of inadvertent reading shifts during transfer or recording. These features together accelerate measurement cycles and cut transcription errors in repetitive tasks. Built for durability and everyday workshop handling Protection to IP65 keeps dust and jets of water from compromising internal electronics, making this caliper suited to tougher environments where coolant and contamination are present. The instrument runs from a standard CR2032 cell and its overall mass and balance are arranged for two‑hand handling when required; the total length supports measurements up to 1,500 mm while the 300 mm jaw length provides secure contact for large parts. The construction targets a pragmatic trade‑off between stiffness and weight, helping teams maintain throughput without sacrificing the robustness expected from a workshop caliper. For specification matching or to arrange a technical consultation about the Filetta caliper and its integration into existing measuring routines, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists in Emmerich will advise on compatibility and delivery options Technical data Article number: M910.350 Brand: Filetta Battery: 1x CR2032 IP rating: IP65 Material: Carbon fibre with steel measuring faces Facts Measuring range: 0–1500 mm Total length: 1736 mm Weight: 2.1 kg Resolution: 0.01 mm Accuracy: 0.21 Jaw length: 300 mm Measuring force: 5–10 N Digital: Yes Special features Digimatic and Bluetooth data output Display functions: mm/Inch, ABS/INC, Reset/Preset Fine adjustment and locking screw Designed for workshop and production use FAQ What measuring range does this caliper cover? The Filetta Digital Workshop Caliper M910.350 covers a 0–1500 mm measuring range suitable for larger workshop components. Is the caliper suitable for use in wet or dusty environments? Yes. The instrument is rated IP65, providing protection against dust ingress and water jets, which makes it appropriate for many workshop conditions. How are measurements exported from the device? Measurements are available via Digimatic output for wired data logging and Bluetooth for wireless transmission to compatible systems. What resolution and accuracy can be expected? The display resolution is 0.01 mm and the device is specified with an accuracy value of 0.21 as provided in the technical data. Does the caliper require a special battery? No special battery is required; the caliper runs on a standard CR2032 cell. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
1500mm Digitaler Einbauschieber, 0,01mm Auflösung, IP 67 - Microtech Metrology
Die robuste Kombination aus Einbaumessschieber, grossem Messbereich und digitaler Anzeige sorgt für reproduzierbare Messwerte auch bei langen Bauteilen. Nutzen Sie die hohe Schutzart und die praxistaugliche Ablesung für effiziente Prüfabläufe. Bestellen Sie den Einbaumessschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Einbaumessschieber von Microtech Metrology Der Einbaumessschieber ist ein digitales Messgerät für präzise Längenmessungen an grossen Bauteilen und eignet sich besonders für die Integration in Prüfplätze und Fertigungsstationen. Digitale Big‑Screen‑Anzeige für schnelle Ablesung IP 67 Schutzklasse für raue Fertigungsumgebung Messbereich 0–1500 mm für lange Werkstücke Auflösung 0,01 mm für klar definierte Ergebnisse Geeignet für Labor und Produktionslinie Hohe Reichweite für große Bauteile und Vorrichtungen Der Messschieber bietet einen Messbereich von 0–1500 mm, was ihn in die Kategorie Lang einordnet und ideal für die Kontrolle grösserer Spannmittel, Aufnahmen und Gehäuse macht. Diese Reichweite ermöglicht es, lange Werkstücke mit einem Gerät zu überprüfen, wodurch Umlenkungen und Transportwege reduziert werden. Anwender profitieren von weniger Rüstzeit und höheren Durchsatzraten bei der Serienprüfung. Schutz und Robustheit für den Einsatz in der Produktion Dank der Schutzart IP 67 bleibt die Elektronik geschützt gegen Staub und zeitweiliges Untertauchen, sodass der Messschieber direkt an Fertigungsplätzen und in feuchten Umgebungen eingesetzt werden kann. Die robuste Bauweise erhöht die Lebensdauer des Geräts und reduziert Stillstandszeiten, was die Gesamtbetriebskosten senkt. Ein einfaches Handling sorgt dafür, dass Prüfzyklen zuverlässig abgeschlossen werden. Präzision und Ablesbarkeit für reproduzierbare Ergebnisse Die Anzeige liefert eine Ablesung von 0,01 mm, ergänzt durch eine Genauigkeit von 0,07 mm, und ermöglicht so verlässliche Messungen im Produktionsalltag. Die grosse digitale Anzeige "Big Screen Swiss Electronics" vereinfacht das Erfassen der Werte, reduziert Ablesefehler und beschleunigt die Prüfprotokollierung. Diese Kombination unterstützt die Einhaltung von Fertigungstoleranzen ohne aufwändige Zusatzmessmittel. Integration in Prüfabläufe und Prozesssicherheit Das digitale Design erlaubt die einfache Einbindung in laufende Prüfprozesse; die direkte Ablesung fördert schnelle Entscheidungen bei der Qualitätskontrolle. Durch die kompakte Bauform lässt sich das Messgerät in Prüfstände einbauen, was Wiederholbarkeit und Messstabilität erhöht. Anwender in Fertigung und Qualitätssicherung erhalten so eine Lösung, die den Prüfablauf vereinfacht und messbare Effizienzgewinne bringt. Setzen Sie auf den Einbaumessschieber von Microtech Metrology und sichern Sie sich reproduzierbare Langmessungen für Ihre Fertigung — bestellen Sie dieses Messinstrument bequem über Metav Werkzeuge; bei Fragen steht das Metav‑Team per E‑Mail und Telefon zur Verfügung. Technische Daten Artikelnummer: 142515147 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459740 Fakten Messbereich: 0–1500 mm Ablesung: 0,01 mm Genauigkeit: 0,07 mm Besonderheiten IP 67 Schutz Digitale Anzeige: Big Screen Swiss Electronics Digital ECLASS: 21170344 FAQ Wie gross ist der Messbereich dieses Messschiebers? Der Messschieber von Microtech Metrology deckt einen Messbereich von 0–1500 mm ab und eignet sich damit für Messaufgaben im Langbereich. Welche Auflösung und Genauigkeit bietet das Gerät? Das Gerät liefert eine Ablesung von 0,01 mm; die angegebene Genauigkeit beträgt 0,07 mm, was eine zuverlässige Messung im Fertigungsumfeld ermöglicht. Ist das Gerät für nasse oder staubige Umgebungen geeignet? Ja, der Einbaumessschieber verfügt über die Schutzklasse IP 67, sodass er gegen Staub und zeitweiliges Untertauchen geschützt ist und sich für raue Umgebungen eignet. Eignet sich der Messschieber für die Integration in Prüfstände? Der Einbaumessschieber von Microtech Metrology wurde für die Einbaumontage konzipiert und lässt sich in Prüfplätze und Fertigungsstationen integrieren, um wiederholbare Messungen zu gewährleisten. Welche Anzeige kommt zum Einsatz? Verwendet wird die digitale Anzeige "Big Screen Swiss Electronics", die eine gute Lesbarkeit und schnelle Erfassung der Messwerte erlaubt. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
1500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert - Microtech Metrology
Das Microtech Messschieber verbindet Genauigkeit und Praxistauglichkeit: Mit einer Ablesung von 0,01 mm, einer reproduzierbaren Genauigkeit von 0,07 mm und IP 67 Schutz ist er ideal für präzise Längenmessungen an großen Bauteilen. Die Auslieferung einschließlich Kalibrierzeugnis nach ISO 17025 schafft Rechtssicherheit für Prüfprotokolle. Nutzen Sie die Kombination aus Reichweite, robuster Konstruktion und nachweisbarer Kalibrierung und bestellen Sie direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung. Messschieber 0–1500 mm von Microtech Metrology Der Messschieber ist ein digitaler Messschieber für präzise Längenmessungen bis 1500 mm und richtet sich an Fertigung, Vorrichtungsbau und Laboranwendungen. ISO 17025 Kalibrierzeugnis inklusive Schutzart IP 67 für staub- und wassergeschützten Einsatz Messbereich bis 1500 mm für großformatige Bauteile Swiss electric Display 11 mm gut ablesbar ABS Messsystem mit Ablesung 0,01 mm Präzision und Messkennwerte für die Fertigung Die Kombination aus Ablesung von 0,01 mm und einer angegebenen Genauigkeit von 0,07 mm ermöglicht schnelle und vergleichbare Messungen in der Serienprüfung. Das ABS Messsystem sorgt für zuverlässige Nulldaten auch bei wechselnden Temperaturbedingungen, während die lesefreundliche Anzeige das Ablesen beschleunigt. Für Messaufgaben, bei denen Messunsicherheit minimiert werden muss, bietet dieses Gerät eine solide Basis für Prüfschritte und Dokumentation. Robuste Bauart und Schutz für den rauen Werkstatteinsatz Der Messschieber verfügt über die Schutzart IP 67, was staubdichten Betrieb und Schutz gegen zeitweiliges Untertauchen bedeutet; dadurch eignet sich das Werkzeug für feuchte oder verschmutzte Produktionsumgebungen. Der stabil dimensionierte Querschnitt von 42x8 sowie die lange Schneide von 300 mm bieten die notwendige Steifigkeit für reproduzierbare Messwerte an längeren Werkstücken. Die digitale Anzeige vom Typ Swiss electric Display mit 11 mm Ziffernhöhe verbessert die Ergonomie bei schnellen Messfolgen. Einsatzbereiche und Handhabung in der Praxis Mit einem Messbereich von 0–1500 mm fällt das Gerät in die Lang-Klasse der Schiebelehren, wodurch es die Balance zwischen Reichweite und Bedienbarkeit wahrt. Das macht den Schieber besonders geeignet für Rohr- und Behälterbau, Vorrichtungs‑ und Formenbau sowie für die Endkontrolle großer Baugruppen. Die einfache Einhandbedienung und die klaren Skalen reduzieren Messzeiten und fördern effiziente Arbeitsabläufe in Werkstatt und Produktion. Kalibrierung, Nachweis und Lieferumfang Die Lieferung beinhaltet ein vollständiges Kalibrierzeugnis nach ISO 17025, womit Messungen dokumentierbar und auditfähig sind. Für Anwender, die Messergebnisse in Prüfberichten benötigen, reduziert dies administrative Nacharbeit und erhöht die Akzeptanz im Audit. Die digitale Technik mit ABS Messsystem sorgt zudem für stabile Referenzwerte über lange Messzyklen. Empfehlung: Für Anwendungen mit großem Messbereich und hohem Dokumentationsbedarf empfiehlt sich der Einsatz des Microtech Messschiebers mit ISO‑Kalibrierung; kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 für Beratungsbedarf und Beschaffung. Produktmerkmale Artikelnummer: 141073815 GTIN: 4061905454455 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS Daten Messbereich: 0–1500 mm Messbereich maximal: 1500 mm Ablesung: 0,01 mm Genauigkeit: 0,07 mm Schnabellänge: 300 mm Querschnitt: 42x8 Besonderheiten ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert IP 67: Staubdicht, kurzzeitiges Untertauchen möglich Swiss electric Display: 11 mm Ziffernhöhe, gute Ablesbarkeit ABS Messsystem: stabile Referenzdaten bei Temperaturschwankungen FAQ Wie genau ist die Messung mit diesem Messschieber? Die angegebene Genauigkeit beträgt 0,07 mm bei einer Ablesung von 0,01 mm; der Microtech Messschieber eignet sich damit für viele industrielle Prüfaufgaben, bei denen Wiederholbarkeit und Nachvollziehbarkeit gefordert sind. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber wird mit einem Kalibrierzeugnis nach ISO 17025 ausgeliefert, sodass Messergebnisse auditfähig sind und sich direkt in Prüfprotokolle einbinden lassen. Für welche Anwendungen eignet sich der Messbereich bis 1500 mm? Der Messbereich bis 1500 mm platziert das Gerät in der Lang-Klasse und ist ideal für Rohr‑ und Behälterbau, Vorrichtungs‑ und Formenbau sowie für die Endkontrolle großer Baugruppen. Ist das Gerät für den Einsatz in feuchten Umgebungen geeignet? Mit der Schutzart IP 67 ist der Microtech Messschieber gegen Staub geschützt und bietet Schutz gegen zeitweiliges Untertauchen, was den Einsatz in feuchten oder verschmutzten Produktionsbereichen erleichtert. Wie gut lässt sich das Display ablesen? Die Digitalanzeige Swiss electric Display verfügt über 11 mm hohe Ziffern und ist damit auch bei schneller Arbeit gut ablesbar, wodurch Messzyklen beschleunigt werden. Hersteller: Microtech Metrology; Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
1500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 Kalibriert - Microtech Metrology
Kombinieren Sie die Messgenauigkeit von 0,01 mm Ablesung mit der zuverlässigen ISO 17025 Kalibrierung und der Reichweite bis 1.500 mm für reproduzierbare Ergebnisse in der Fertigung. Bestellen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie die technische Beratung bei Bedarf an. Messschieber Digital von Microtech Metrology Der Messschieber Digitaler Präzisionsschieber für Messaufgaben mit hoher Reichweite und nachgewiesener Kalibrierqualität. Messschieber »Digital« von Microtech Metrology Gut ablesbare Swiss electric Digit Anzeige Messbereich bis 1.500 mm für große Bauteile Auflösung 0,01 mm, Genauigkeit 0,05 mm ISO 17025 Kalibrierung mit Kalibrierzeugnis Präzision und Nachweisbarkeit für Fertigungsprozesse Der digitale Schieber liefert dank 0,01 mm Auflösung zuverlässige Messergebnisse, die Prüfprozesse effizient machen. Die dokumentierte ISO 17025 Kalibrierung sorgt für Nachvollziehbarkeit bei Prüfprotokollen und reduziert Nacharbeit in der Produktion. Für Qualitätssicherung bedeutet das: weniger Nachprüfungen, schnellere Freigaben und ein klarer Nachweis für Auditoren. Große Reichweite, reproduzierbare Messungen Mit einem Messbereich bis 1.500 mm fällt der Schieber in die Kategorie Lang und eignet sich daher für größere Bauteile im Vorrichtungs‑ und Formenbau. Die lange Schenkelgeometrie wurde so ausgelegt, dass die Steifigkeit erhalten bleibt und Messungen über die gesamte Länge reproduzierbar bleiben. Anwender profitieren von einer Balance aus Reichweite und Handhabung. Robuste Bauweise für die Werkstattumgebung Die IP‑Schutzklasse IP 67 macht das Messgerät unempfindlich gegen Spritzwasser und kurzzeitiges Eintauchen, wodurch der Schieber auch in anspruchsvollen Werkstattumgebungen eingesetzt werden kann. Der Querschnitt 42x8 stabilisiert den Balken, während die Schnabellänge 150 mm flexible Zugänglichkeit bei Innen- und Außenmessungen erlaubt. Datenerfassung und Schnittstellen für moderne Abläufe Der integrierte Wireless Datenausgang ermöglicht schnelle Übertragung von Messwerten in Prüfsoftware und Messprotokolle. Dies reduziert Tippfehler, beschleunigt Dokumentationsprozesse und integriert das Messgerät nahtlos in digitale Fertigungsprozesse. Die gut ablesbare Swiss electric Digit Anzeige mit 14 mm Höhe vereinfacht die Erfassung manueller Messungen. Zielgruppe und praktische Anwendungsempfehlung Der Schieber richtet sich an Fertigungsbetriebe, Prüfstellen und Werkzeugbauer, die präzise Längenmessungen an größeren Bauteilen benötigen. Die Kombination aus hoher Auflösung, robuster Schutzklasse und kalibrierter Auslieferung macht das Instrument zur verlässlichen Ergänzung in Prüfständen, Messräumen und Fertigungslinien. Bestellen Sie den Microtech Metrology Messschieber mit ISO 17025 Kalibrierung direkt bei Metav Werkzeuge oder fordern Sie weitere technische Daten per eMail an: info@metav-werkzeuge.com / Telefon +49 2822 7131930. Technische Daten Artikelnummer: 141073892 Marke: Microtech Metrology Bezeichnung: Messschieber mit langem Messschnabel Fakten Messbereich: 0–1500 mm Genauigkeit: 0,05 mm Ablesung: 0,01 mm Schnabellänge: 150 mm Querschnitt: 42x8 Digitalanzeige: Swiss electric Digit Höhe 14mm Besonderheiten IP 67 Schutz: staubdicht und kurzzeitiges Eintauchen Wireless Datenausgang: kabellose Datenübertragung ABS Messsystem: absolute Positionsspeicherung ISO 17025 Kalibrierung: Lieferung mit Kalibrierzeugnis Messbereich Kategorie: Lang (1.000–2.000 mm) FAQ Wie genau ist die Messung mit diesem Messschieber? Der Messschieber von Microtech Metrology bietet eine Ablesung von 0,01 mm und eine Genauigkeit von 0,05 mm, geeignet für präzise Werkstatt‑ und Fertigungsprüfungen. Wird der Messschieber kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird nach ISO 17025 kalibriert ausgeliefert und kommt mit einem Kalibrierzeugnis. Für welche Anwendungen eignet sich der 1.500 mm Messbereich? Der große Messbereich macht den Schieber ideal für Vorrichtungsbau, Gehäusemessungen und größere Spannmittel in der Serienfertigung. Welche Schnittstellen stehen für die Datenerfassung zur Verfügung? Das Gerät verfügt über einen Wireless Datenausgang, der eine einfache Integration in Prüfsoftware und Messdatenerfassung erlaubt. Ist das Gerät in feuchten Werkstattumgebungen einsetzbar? Durch die IP 67 Schutzklasse ist der Schieber gegen Spritzwasser geschützt und für den Einsatz in anspruchsvollen Werkstattbedingungen geeignet. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv; Ukraine; tool@microtech.tools
1500mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 kalibriert – Microtech Metrology
Kombinieren Sie Präzision, ISO‑17025‑Kalibrierung und robusten IP‑Schutz für verlässliche Messergebnisse; beziehen Sie den Messschieber direkt über Metav Werkzeuge oder fragen Sie die technische Beratung an. Messschieber Digitaler Messschieber von Microtech Metrology Messschieber von Microtech Metrology, digital für präzise Längenmessungen im großformatigen Bereich Digitalanzeige Swiss Electric, 11 mm Ziffernhöhe ISO‑17025 Kalibrierzeugnis inklusive IP67 Schutz gegen Staub und Wasser Messbereich 0–1.500 mm für große Bauteile ABS Messsystem für zuverlässige Messwerte Präzision und Reproduzierbare Messwerte für Produktion und Labor Der Messschieber liefert eine Ablesung von 0,01 mm und eine dokumentierte Genauigkeit 0,05 mm, wodurch er sich für präzise Prüfaufgaben in Fertigung und Werkstatt eignet. Die integrierte Digitalanzeige mit 11 mm Ziffernhöhe sorgt für schnelle Ablesbarkeit, während das ABS‑Messsystem positionssichere Ergebnisse ohne Referenzverlust ermöglicht. Durch die mitgelieferte ISO‑17025‑Kalibrierung wird die Messspurführung nachvollziehbar und auditfähig gemacht. Ergonomie und Handling bei langen Messfeldern Mit einem Messbereich bis 1.500 mm und einer Schnabellänge von 150 mm ist der Schieber für große Spannmittel und Bauteile ausgelegt. Der Querschnitt von 42x8 wurde so gewählt, dass Steifigkeit und Handhabung im Einklang stehen; das reduziert Messfehler durch Durchbiegung und erleichtert Einhandmessungen an längeren Werkstücken. Die robuste Bauweise unterstützt wiederholte Einsätze in rauer Umgebungsbedingungen. Einsatzbereiche und Zielgruppe für Lang‑Messungen Dieses Messwerkzeug ist für Anwendungen im Vorrichtungs‑ und Formenbau, in der Maschinenmontage und in der Qualitätskontrolle großer Baugruppen konzipiert. Die Auslegung auf lange Messstrecken verbindet Reichweite mit praxisgerechter Handhabung; somit ist das Gerät ideal für Anwender, die großformatige Bauteile routinemäßig prüfen und reproduzierbare Toleranzüberwachungen benötigen. Schutz, Dokumentation und Serviceaspekte Der Schieber erfüllt IP67‑Anforderungen und bietet damit Schutz gegen Staub und zeitweiliges Untertauchen, was Reinigung und Einsatz in anspruchsvollen Produktionsbereichen erleichtert. Das mitgelieferte Kalibrierzeugnis gemäß ISO‑17025 reduziert Prüfaufwand bei Erstanschaffung und erleichtert die Integration in betriebliche Qualitätsdokumentationen. Für weiterführende technische Auskünfte steht Metav mit Beratung und schneller Versorgung zur Seite. Empfehlung: Den Microtech Metrology Messschieber mit 1.500 mm Messbereich und ISO‑17025‑Kalibrierung über Metav Werkzeuge beziehen; bei technischen Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren. Produktmerkmale Artikelnummer: 141073812 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS GTIN: 4061905454448 Fakten Messbereich: 0–1500 mm Genauigkeit: 0,05 mm Ablesung: 0,01 mm Querschnitt: 42x8 Displayhöhe: 11 mm Besonderheiten IP‑Schutz: IP 67 (Schutz gegen Staub und Wasser) ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei (Laborstandard) Digitalanzeige: Swiss Electric Digit, Ziffernhöhe 11 mm Schnabellänge: 150 mm ABS: Absolutmesssystem, kein Referenzverlust FAQ Ist der Messschieber für den Einsatz in rauer Produktionsumgebung geeignet? Der Microtech Metrology Messschieber verfügt über IP67 Schutz und ist somit gegen Staub und zeitweiliges Untertauchen geschützt, was den Einsatz in anspruchsvollen Produktionsumgebungen unterstützt. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber wird mit einem Kalibrierzeugnis nach ISO‑17025 ausgeliefert, sodass die Messergebnisse dokumentiert und auditfähig sind. Welche Auflösung und Genauigkeit liefert das Gerät? Die Digitalanzeige bietet eine Auflösung von 0,01 mm, die dokumentierte Genauigkeit beträgt 0,05 mm, geeignet für präzise Prüfungen in der Fertigung und Qualitätskontrolle. Eignet sich das Gerät für große Bauteile und Montagen? Der Messbereich von 0–1.500 mm und die robuste Bauweise machen den Schieber passend für große Bauteile, Montagearbeiten und Vorrichtungsprüfungen. Welche Anzeigeeigenschaften hat die Digitalanzeige? Die Swiss Electric Digitalanzeige hat eine Ziffernhöhe von 11 mm für gute Lesbarkeit und unterstützt schnelle, eindeutige Messergebnisse. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
1500mm Digitaler Messschieber, 0,01mm, IP 67, Wireless, ISO 17025 Kalibriert - Microtech Metrology
Der lange Messbereich, die ISO 17025‑Kalibrierung und der kabellose Datenausgang bieten eine praxisnahe Lösung für die Qualitätskontrolle großer Bauteile; bestellen Sie den Messschieber direkt über Metav Werkzeuge oder lassen Sie sich telefonisch und per E‑Mail beraten. Messschieber — Digitaler Messschieber von Microtech Metrology Der Messschieber ermöglicht präzise Längenmessungen bis 1 500 mm und ist für Werkstatt, Vorrichtungsbau und Fertigung konzipiert. Lange Messreichweite bis 1 500 mm Kalibriert nach ISO 17025 mit Kalibrierzeugnis Kabellose Datenübertragung (Wireless) Swiss Electric Display, Ziffernhöhe 14 mm Schutzart IP 67 für rauen Einsatz Praxisgerecht konzipiert für großformatige Messaufgaben Die Schieblehre wurde für Messaufgaben entwickelt, bei denen Reichweite und Handhabung zusammenkommen. Mit einem Messbereich bis 1 500 mm fällt das Gerät in die Kategorie Lang, die speziell für längere Messstrecken ausgelegt ist. Die lange Backengeometrie und die Schnabellänge von 300 mm erlauben Innen‑ und Außenmessungen großer Bauteile, ohne dass mehrfaches Umsetzen nötig wird. Das reduziert Messfehler und beschleunigt Abläufe in der Werkstatt. Präzision und geprüfte Kalibrierung für die Qualitätskontrolle Für reproduzierbare Ergebnisse sorgt eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,07 mm; diese Kennwerte ermöglichen verlässliche Prüfungen in der Serienfertigung. Die Auslieferung erfolgt vollständig kalibriert und umfasst ein Kalibrierzeugnis nach ISO 17025, was die Einsatzbereitschaft für Prüfmittelüberwachung und Dokumentation erleichtert. Damit eignet sich das Messgerät für Audit‑gerechte Messprozesse und die lückenlose Rückverfolgbarkeit. Elektronik, Anzeige und Schutz für den rauen Werkstattalltag Die Anzeige basiert auf einer Swiss Electric Anzeige mit 14 mm Ziffernhöhe, die auch bei schlechten Lichtverhältnissen gut ablesbar bleibt. Die Elektronik ist gegen Staub und zeitweiliges Untertauchen geschützt (IP 67), sodass der Einsatz direkt an Fertigungslinien und in produktionsnahen Bereichen möglich ist. Das robuste Profil mit einem Querschnitt von 42x8 mm sorgt für Stabilität über lange Messlängen und für eine sichere Führung bei manuellen Messungen. Datenübertragung und Integration in digitale Workflows Der kabellose Datenausgang ermöglicht die einfache Übertragung von Messwerten an Auswertesysteme oder Handcomputer und reduziert Übertragungsfehler. Die Kombination aus digitaler Anzeige und Wireless‑Schnittstelle erleichtert die Integration in Prüfprotokolle und Fertigungssteuerung. Für Anwender, die Messdaten automatisch erfassen möchten, bietet das Gerät somit einen klaren Effizienzvorteil gegenüber rein analogen Lösungen. Empfehlung: Für präzise Langmessungen das ISO‑17025‑kalibrierte Microtech Messschieber direkt bei Metav Werkzeuge anfragen — E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930; alternativ WhatsApp +49 170 2837271. Produktmerkmale Artikelnummer: 141073895 Marke: Microtech Metrology Bezeichnung: Messschieber Messsystem: ABS GTIN: 4061905454677 Fakten Messbereich: 0–1500 mm Messbereich Max: 1500 mm Ablesung: 0,01 mm Genauigkeit: 0,07 mm Schnabellänge: 300 mm Digital Anzeige Höhe: 14 mm Querschnitt: 42x8 mm Besonderheiten IP 67 (Staubdicht, Schutz gegen zeitweiliges Untertauchen) Datenausgang: Wireless (kabellose Datenübertragung) Swiss Electric Anzeige (helle, gut ablesbare Ziffern) ISO 17025 Kalibrierung mit Kalibrierzeugnis Digitale Schieblehre für großformatige Werkstattanwendungen FAQ Ist das Gerät für die Messung großer Werkstücke geeignet? Ja. Der Messbereich bis 1 500 mm qualifiziert den Schieber für großformatige Messaufgaben; die Ausführung in der Kategorie Lang erleichtert stabile Messungen an langen Bauteilen. Wird der Messschieber kalibriert geliefert? Ja. Der Microtech Messschieber wird vollständig kalibriert ausgeliefert und enthält ein Kalibrierzeugnis nach ISO 17025, sodass das Messgerät sofort auditfähige Messergebnisse liefert. Wie genau sind die Messwerte und wie fein ist die Anzeige? Die Ablesung beträgt 0,01 mm, die angegebene Genauigkeit liegt bei 0,07 mm; die Swiss Electric Anzeige mit 14 mm Ziffernhöhe sorgt für klare Ablesbarkeit auch bei schneller Prüfung. Kann man Messwerte digital weiterverarbeiten? Die kabellose Datenübertragung (Wireless) ermöglicht die Übertragung von Messwerten an Auswertegeräte und Prüfsoftware, was die Integration in digitale Workflows erleichtert. Ist das Gerät für den Einsatz in rauer Umgebung geeignet? Durch die Schutzart IP 67 ist das Messgerät gegen Staub und zeitweiliges Untertauchen geschützt und für produktionsnahe Umgebungen geeignet. Hersteller: Microtech Metrology; Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
1500mm Einbaumessschieber, 0,001mm Ablesung, IP 67, Swiss Electronics - Microtech Metrology
Die Kombination aus großem Messbereich und feiner Ablesung sorgt für reproduzierbare Messergebnisse, während die IP 67 Schutzart den Einbau auch in rauen Produktionsumgebungen erlaubt. Nutzen Sie die hohe Reichweite und die robuste Bauweise für seriennahe Messprozesse und bestellen Sie den Einbaumessschieber direkt über Metav Werkzeuge oder fordern Sie technische Beratung an. Einbaumessschieber von Microtech Metrology Der Einbaumessschieber von Microtech Metrology eignet sich für präzise Längenmessungen im Einbau bis 1500 mm und für anspruchsvolle industrielle Anwendungen. Einbaumessschieber von Microtech Metrology Messbereich bis 1500 mm für Langmessungen Ablesung 0,001 mm für feine Details IP 67 Schutzart für rauen Einsatz Swiss Electronics Display mit digitaler Anzeige Robuste Konstruktion für industrielle Einbaulösungen Die mechanische Ausführung des Einbaumessschiebers wurde für den Dauerbetrieb konzipiert und bietet eine belastbare Bauart, die Vibrationen und wiederholte Belastungen standhält. Durch die geschützte Elektronik und die IP 67 Klassifizierung bleibt die Funktionalität auch bei Staubbelastung und kurzzeitigem Untertauchen erhalten, was Einbauorten mit Spritzwasser oder Emulsionen entgegenkommt. Das stabile Profil minimiert Durchbiegung über lange Messlängen und erhöht die Messreproduzierbarkeit. Präzision und Ablesegenauigkeit für verlässliche Messwerte Dank einer feinen Ablesung von 0,001 mm lassen sich auch kleine Maßabweichungen sicher erkennen; die deklarierte Genauigkeit von 0,04 mm gibt die erwartbare Messunsicherheit über den gesamten Messbereich an. Diese Kombination macht den Schieber geeignet für Fertigungsprüfungen, Qualitätskontrolle und Vorabmessungen bei Montagearbeiten. Die digitale Anzeige erleichtert die schnelle Dokumentation und reduziert Ablesefehler gegenüber rein mechanischen Lösungen. Einbau, Integration und Bedienkomfort Beim Einbau bietet die kompakte Messkopfgeometrie einfache Montagemöglichkeiten in Vorrichtungen und Messstationen. Die digitale Swiss Electronics Anzeige ist auf schnelle Lesbarkeit ausgelegt und ermöglicht eine zügige Anbindung an Auswerteeinheiten, sofern Schnittstellen vorhanden sind. Für Anwender bedeutet das weniger Ausfallzeiten und eine höhere Taktung bei wiederkehrenden Prüfzyklen, da Messvorgänge schneller und sicherer ablaufen. Zielgruppe und typische Einsatzfelder Konstruktionsbüros, Werkstätten und Fertigungsstraßen profitieren von der großen Messlänge und der robusten Schutzart, die den Einbaumessschieber zu einem Werkzeug für Serienmessungen und langlebige Prüfplätze macht. Besonders geeignet ist das Gerät dort, wo längere Bauteile direkt in der Maschine oder Vorrichtung vermessen werden müssen. Anwender mit Ansprüchen an Reichweite und praktikable Handhabung finden hier eine ausbalancierte Lösung. Empfehlung: Für präzise Langmessungen im Einbau wählen Sie den Einbaumessschieber von Microtech Metrology und nutzen Sie die Verfügbarkeit und Beratung von Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 142515146 GTIN: 4061905459962 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber Digitalanzeige: Swiss Electronics Fakten Genauigkeit: 0,04 mm Ablesung: 0,001 mm Messbereich: 0–1500 mm IP-Schutz: IP 67 Besonderheiten Digitales Messgerät Swiss Electronics Display IP 67: staubdicht, kurzzeitiges Untertauchen Messschieber-Kategorie: Lang (Messbereich 1000–2000 mm) FAQ Wie groß ist der Messbereich dieses Messschiebers? Der Messschieber von Microtech Metrology bietet einen Messbereich von 0–1500 mm und eignet sich damit für Langmessungen in Fertigungs- und Einbausituationen. Welche Auflösung und Genauigkeit liefert das Gerät? Die Ablesung beträgt 0,001 mm bei einer angegebenen Genauigkeit von 0,04 mm, wodurch feine Maßabweichungen erkennbar und reproduzierbar werden. Ist das Messgerät für den Einsatz in feuchten Umgebungen geeignet? Durch die Schutzart IP 67 ist der Einbaumessschieber gegen Eindringen von Staub geschützt und hält kurzzeitiges Untertauchen stand, somit ist ein Einsatz in feuchteren Fertigungsbereichen möglich. Eignet sich der Schieber für die Qualitätskontrolle in der Serienfertigung? Ja, der große Messbereich kombiniert mit der feinen Ablesung macht den Einbaumessschieber von Microtech Metrology zum geeigneten Messmittel für wiederkehrende Prüfungen in der Serienfertigung. Welche Anzeige-Technik wird verwendet? Der Schieber ist mit einer digitalen Anzeige von Swiss Electronics ausgestattet, die eine klare Darstellung der Messwerte ermöglicht und die Erfassung beschleunigt. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
1500mm Workshop Caliper Long Jaw, Colour 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a 1,500 mm measuring range combined with a 0.01 mm readout and ISO 17025 calibration for reliable, traceable long‑span measurements; order directly via Metav Werkzeuge or consult the Emmerich team for application advice. Workshop Caliper — 1,500 mm range, Colour 2.4" touchscreen (Microtech Metrology) A Workshop Caliper engineered for long‑span workshop measurements and jig work, combining extended reach with a colour touchscreen and certified calibration. Measuring range up to 1,500 mm Colour 2.4" touchscreen display ISO 17025 calibration with certificate Wireless and USB data output Long‑span capability that keeps production moving The instrument delivers a 1,500 mm measuring range that places it in the long‑caliper category for heavy workshop use, offering the reach needed for large fixtures, housings and long shafts. The extended span is paired with a 300 mm jaw length that eases access to deep features and recesses while keeping handling practical in a shop environment. This configuration reduces the need for makeshift setups and repeat transfers, supporting faster throughput on large components and helping to maintain consistent production flow. Traceable precision and controlled measurement force Equipped with a digital readout resolution of 0.01 mm and supplied with an ISO 17025 calibration certificate, the caliper provides measurable traceability for quality systems and audit requirements. The integrated fine adjustment control and handmade measuring jaws enhance repeatability by enabling smooth, controlled closing action; the specified measuring force range (1–20 N) minimises variation due to operator pressure. Together these features offer a robust basis for documented inspection routines and reliable dimensional checks in serial production. Modern connectivity to reduce transcription effort Data transfer is supported via Wireless and USB outputs and presented on a Colour 2.4" touchscreen, which shortens the measurement‑to‑record cycle and reduces manual entry errors. The digital interface simplifies batch logging and connection to data collection systems, making the instrument suitable for integration into quality workflows. This connectivity not only speeds up reporting but also aids traceable process control where timestamped or centrally archived measurements are required. Workshop durability and practical advantages Built for shopfloor rigour, the caliper combines workshop‑grade construction with features that favour everyday use: a long measuring span for large parts, handcrafted jaws for improved contact fidelity and a user‑orientated display for rapid readouts. The instrument’s design emphasises dependable handling during repeated checks and makes it an effective tool for jigs, large assemblies and fixture set‑up, where consistent dimensional control saves rework time and protects downstream processes. For reliable long‑range workshop measurements, request the Microtech Metrology Workshop Caliper from Metav Werkzeuge — contact the Emmerich team for specification advice, calibration documentation and delivery options Technical data SKU: 141015256 GTIN: 4061905038976 Manufacturer: Microtech Metrology Facts Measuring range: 0–1,500 mm Readout resolution: 0.01 mm Jaw length: 300 mm Special features Colour 2.4" touchscreen display Wireless and USB data output ISO 17025 calibration with certificate Fine adjustment Handmade measuring jaws Measuring force: 1–20 N FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–1,500 mm, classifying it as a long‑range instrument suitable for large workpieces. Is a calibration certificate supplied with the instrument? Yes — the Workshop Caliper is supplied fully calibrated with an ISO 17025 certificate, ensuring traceability and audit readiness. What resolution and display does the device offer? The digital display has a readout resolution of 0.01 mm, presented on a Colour 2.4" touchscreen for clear, fast readings. How can measurement data be exported from the caliper? Measurement data can be exported via Wireless or USB connections for integration with data capture systems. Are the measuring jaws suitable for repeated shop use? The caliper features handmade measuring jaws designed for consistent contact and durability during frequent inspections. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1500mm Workshop Caliper Monoblock 0.05mm Vernier Fine Adjustment 200mm Jaws Stainless Steel, Case - Metav IndustryLine
Take advantage of a long-range, monoblock design that combines reach and stiffness with a fine-adjustment mechanism for repeatable workshop measurement; order this caliper directly via Metav Werkzeuge or contact the consultants for tailored advice. Metav IndustryLine Workshop Caliper M201.360 – 0–1500 mm, Monoblock, Fine Adjustment The Metav IndustryLine Workshop Caliper M201.360 is a long-range, monoblock analog caliper intended for large-format workshop use, offering precise step, inside and outside measurements across extended assemblies. Monoblock stainless steel construction Fine-adjustment thumb screw Long-range 0–1500 mm measurement Dual nonius: 1/128" & 1/20 mm Long reach with stable handling for large components The caliper’s 0–1500 mm measuring range places it in the long-series class for shop use, where reach and repeatability over distance are essential. The monoblock construction increases profile stiffness compared with split-beam types, reducing deflection during long measurements. The extended jaw length 200 mm helps maintain contact geometry on larger parts, so measurements of housings, assemblies and long shafts remain consistent. This design benefits production and maintenance workflows that require a single instrument to cover broad component sizes. Clear mechanical reading and controlled fine adjustment Equipped with dual nonius scales, the instrument provides a metric bottom scale of 1/20 mm (0.05 mm) resolution—an industrial standard for mechanical calipers—and an imperial top scale of 1/128" for mixed-measurement environments. The integrated fine-adjustment screw allows small, deliberate slider movements for repeatable positioning, which reduces reading errors caused by hand slip. For operations that prefer analogue gauges, this combination delivers a straightforward, low-maintenance measuring method with easily verifiable graduations. Materials and standards geared to workshop durability The slide and jaws are manufactured from stainless hardened steel with a matt-chrome scale finish, chosen to resist shop contamination and preserve scale legibility. The caliper is supplied according to DIN 862 for models up to 200 mm jaw length; larger sizes follow factory calibration norms to preserve traceable geometry. These choices ensure a durable instrument that remains serviceable in abrasive or oily environments, while the surface treatment limits glare for clearer readings. Practical benefits for production and quality control As a workshop instrument, this caliper addresses two priorities: extended measuring range and reliable everyday use. The robust construction reduces the need for frequent replacement; the analogue reading system offers immediate feedback without batteries or electronics. For teams integrating tools into standard procedures, the device provides a cost-effective method to measure large components without resorting to more complex gauge systems—supporting quality control, setup and maintenance tasks across machine shops and fabrication departments. Contact Metav Werkzeuge in Emmerich for application advice and to arrange procurement of the Metav IndustryLine M201.360 workshop caliper; their consultants will confirm suitability for specific measurement tasks and delivery options. Technical data Article number: M201.360 GTIN: 4054469101941 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–1500 mm Jaw length: 200 mm Resolution (nonius): 1/20 mm (≈0.05 mm) Nonius (imperial): 1/128" Standard: DIN 862 up to 200 mm; factory norm from 250 mm Features Monoblock construction Material: stainless hardened steel with matt-chrome scale Fine-adjustment screw Analog caliper with dual nonius scales Intended for long-range workshop measurement FAQ How precise is the reading on this long-range caliper? The metric nonius of the Metav IndustryLine M201.360 provides a resolution of 1/20 mm (0.05 mm), which corresponds to the common industrial standard for mechanical calipers. Is the caliper suitable for inside, outside and step measurements? Yes, the workshop caliper from Metav IndustryLine is designed for outside, inside and step measurements across extended components, supported by its long jaws and robust slide. Which material is used for the measuring faces and scale? The instrument uses stainless hardened steel for the slide and jaws, with a matt-chrome finish on the scale to improve legibility and resistance to shop wear. Does this caliper comply with recognised standards? The caliper is manufactured to meet DIN 862 requirements for models with up to 200 mm jaw lengths; larger sizes are produced according to factory calibration norms to maintain measuring geometry. Can the fine-adjustment mechanism improve repeatability? The integrated fine-adjustment screw helps achieve controlled slider movement and repeatable positioning, which reduces manual variation during successive measurements with the M201.360. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com