Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
150mm Dial Caliper Three-Point Measuring, 0.02mm Resolution, DIN 862, Delivered Calibrated In Case - Metav IndustryLine
The combination of a robust analogue dial, 0.02 mm readability and the four measuring functions makes this caliper an efficient choice for routine workshop and quality‑control tasks; order directly via Metav Werkzeuge or contact the consultants for specification guidance. Dial caliper TOP 150 x 0.02 mm — analogue workshop caliper with 150 mm range The Dial caliper TOP 150 x 0.02 mm is a standard 150 mm dial caliper designed for machining and inspection tasks, offering fine 0.02 mm graduations and a compact design for everyday workshop use. 150 mm measurement range 0.02 mm readout precision Four measuring functions included Locking screw for stable readings Reliable precision for everyday quality control This standard‑range caliper delivers consistent measurements across common workshop tasks thanks to its 150 mm measuring span and a fine 0.02 mm dial resolution. Compliance with DIN 862 ensures measurements meet established workshop norms, which supports traceable inspection routines and makes integration into existing quality processes straightforward. The instrument is particularly suited to machine shops and metalworking environments where repeatability and a compact footprint are priorities. Robust mechanics that reduce measurement variability The analogue dial and mechanical design focus on reproducibility: a 38 mm dial provides clear indication, while the locking screw secures the slider for repeat readings and transferred measurements. Jaw lengths of 40/20 mm offer a practical balance between reach and rigidity for typical outside and inside checks. A thread‑table on the reverse face gives quick reference data during set‑up, reducing lookup time and improving throughput during batch inspection. Versatile four‑function measurement accelerates inspection workflow Equipped for outside, inside, depth and step measurements, the caliper replaces multiple single‑purpose tools and speeds up inspection cycles on assemblies and machined parts. The analogue readout requires no batteries, making it a low‑maintenance instrument for shop floors where continuity of service is essential. Practical features such as the clear dial, secure clamp and compact form factor translate directly into shorter measuring sequences and fewer handling errors during repetitive checks. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine dial caliper into inspection routines — +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M202.141 GTIN: 4054469102368 eClass: 21170344 Norm: DIN 862 Measurements & accuracy Measuring range: 0–150 mm Readability: 0.02 mm Dial diameter: 38 mm Jaw length: 40/20 mm Features & special functions Analogue dial display Four measuring functions: outside / inside / depth / step Locking screw for slider fixation Thread table on reverse side Mechanically driven indicator (no battery required) FAQ What measuring tasks is this caliper intended for? The Dial caliper TOP 150 x 0.02 mm is intended for general workshop and quality‑control measurements, covering outside, inside, depth and step checks typical in machining and metalworking. What level of precision can be expected from the instrument? The instrument provides a 0.02 mm readout and is manufactured to meet DIN 862, making it suitable for standard industrial inspections where a 0.02 mm resolution is required. Does the caliper require batteries or special maintenance? No batteries are required for the analogue dial display; routine maintenance consists of keeping the slide clean and lightly lubricated and checking the locking screw for secure clamping. Can the caliper be used for internal and external threads? Yes — the caliper supports outside and inside measurements and includes a thread table on the reverse side for quick reference when assessing threaded features. Is this instrument suitable for shop‑floor use? Designed with a robust mechanical dial and locking screw, the caliper is suitable for regular shop‑floor use where reliable, battery‑free measurements are preferred. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Caliper Top, 0.01mm Resolution, Four-Point Measuring, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of workshop-ready precision and practical handling: the high-resolution 0.01 mm dial and the clear 38 mm indicator provide repeatable results across internal, external, depth and step measurements; the locking screw and protective case support reliable transport and routine use. Order the caliper directly via Metav Werkzeuge or consult the advisors for application guidance. Watchmaker caliper "TOP" 150 x 0.01 mm — Metav IndustryLine dial caliper with 38 mm dial The Watchmaker caliper "TOP" 150 x 0.01 mm is an analogue dial caliper designed for precise everyday measurements in machine shops and fine mechanical work, covering the standard workshop range. High-resolution 0.01 mm dial reading Four measurement functions 38 mm clear mechanical dial Locking screw for repeatable readings Precision where standard workshop measurements matter This analogue dial caliper delivers a 0.01 mm reading increment on a 38 mm dial, combining traditional mechanical reliability with fine resolution. Built to DIN 862, the instrument sits in the Standard range (measuring range 0–150 mm), which balances reach and rigidity for most machine‑shop and metalworking tasks. The mechanical dial mechanism avoids electronic dependencies while still permitting precise, repeatable readings; the result is a tool suited to both production checks and fine adjustment tasks where stable, verifiable figures are required. Repeatable handling and transport-ready design A firm locking screw secures the slide for repeat measurements and safe transfer between stations, while the included protective case ensures the caliper remains protected in transit. The reverse side features a compact thread chart, useful for quick reference in workshop settings. Together these elements reduce handling errors and speed up routine inspections, supporting a steady workflow and fewer interruptions for recalibration or adjustment. Versatile measurement capabilities for everyday workflows Equipped for internal, external, depth and step measurements, the caliper replaces multiple single‑purpose gauges and condenses inspection tasks into one instrument. Its analogue format makes it particularly attractive where tactile feedback and simple maintenance are preferred over electronic systems. As a practical tool in assembly, servicing and quality checks, it complements digital metrology in an integrated workshop environment and supports consistent output across small to medium batch runs. Contact Metav Werkzeuge for tailored advice or to arrange supply from Emmerich — the Metav IndustryLine Watchmaker caliper "TOP" 150 x 0.01 mm is supplied in a protective case and ready for immediate workshop use Technical data Article number: M202.130 GTIN: 4054469102276 Brand: Metav IndustryLine Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Dial diameter: 38 mm Measuring functions: 4 Customs tariff number: 90173000 Special features Analogue dial caliper (mechanical) Four measurement functions: internal, external, depth, step Locking screw for repeatable positioning Thread chart on reverse side Delivered in protective case Special version designation: TOP FAQ What reading accuracy does the caliper provide? The Watchmaker caliper "TOP" 150 x 0.01 mm gives a reading increment of 0.01 mm and is manufactured to meet DIN 862 workshop standards. Can this instrument perform depth and step measurements? Yes, the dial caliper supports internal, external, depth and step measurements, consolidating common inspection tasks in one tool. Is the caliper suitable for general machine‑shop use? With a measuring range of 0–150 mm and a robust mechanical dial, this Standard‑range caliper is well suited to everyday machine‑shop and metalworking measurements. Does the product come with a protective case? The caliper is supplied in a protective case for transport and safe storage, supporting secure handling between workstations. Does the caliper include a thread reference or scale? A thread chart is printed on the reverse side of the caliper for quick workshop reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Bore Distance Caliper With 5mm Tapered Probe, 60mm Jaw Length, IP64 Protection - Metav IndustryLine
Benefit from reliable centre‑to‑centre measurements with a hardened stainless steel construction and a 0.01 mm digital display; the integrated RB 5 data output speeds documentation. Order the Digital Borehole Distance Caliper M240.291 directly via Metav Werkzeuge or ask the consultants for application advice. Digital Borehole Distance Caliper M240.291 — 150 × 60 mm, 5 mm cone (Metav IndustryLine) A Digital Borehole Distance Caliper M240.291 engineered for precise measurement of bore centre distances in workshop and inspection environments. Digital display with ON/OFF and PRESET Measuring range 5–150 mm Hardened stainless steel construction Delivered in transport case Robust construction for repeatable workshop measurements The instrument combines a hardened stainless steel frame with a compact measuring span of 5–150 mm, classified as a Standard caliper for everyday machine‑shop tasks. The robust material choice ensures resistance to wear and maintains dimensional stability during repeated handling, while the cone tip with a 5 mm diameter enables access to small bore interfaces. With a jaw length of 60 mm and a total weight of 0.5 kg, the device balances stiffness and manoeuvrability, making it suitable for routine quality‑control tasks and assembly‑line checks where consistent readings are essential. Faster readings and straightforward data integration Equipped with a clear digital display and ON/OFF plus PRESET functions, the caliper permits rapid zeroing and immediate readout, reducing cycle time in repetitive measurement work. The instrument offers a display resolution of 0.01 mm, which supports fine discrimination of centre distances without complex interpretation. For traceable data capture, the RB 5 output provides a direct interface to measuring data systems, simplifying documentation and reducing transcription errors during process control. Practical supply and dependable supply chain Delivered in a dedicated transport case, the caliper arrives protected and ready for use on the shop floor. Built to a Werksnorm, the measuring instrument reflects Metav IndustryLine’s focus on reproducible performance across a wide range of industrial applications. Metav’s presence in Emmerich acts as a quality filter for European customers, combining broad product availability with a tested supply chain—advantages that lower procurement risk and ensure steady access to spare and replacement tools when needed. Contact Metav Werkzeuge for tailored advice on the M240.291 and to arrange delivery from Emmerich; consultants are available to discuss integration and application specifics. Technical Data Article number: M240.291 GTIN: 4054469178721 Manufacturer: Metav IndustryLine Facts Measuring range: 5–150 mm Display resolution: 0.01 mm Cone diameter: 5 mm Jaw length: 60 mm Weight: 0.5 kg Customs tariff number: 90173000 Special features Material: stainless steel, fully hardened Digital display with ON/OFF and PRESET Data output: RB 5 Delivery in transport case Norm: Werksnorm eClass: 21170344 FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 5–150 mm, making it a standard‑range instrument for general machine‑shop and inspection tasks. What resolution is available on the display? The digital readout provides a resolution of 0.01 mm, enabling clear, repeatable measurements for centre‑to‑centre checks. Is the instrument suitable for repeated workshop use? Yes, the fully hardened stainless steel construction and compact design ensure durability and repeatability under routine workshop conditions. How can measured data be exported? Measured values can be transmitted via the RB 5 data output for direct logging into a data collection system or inspection software. Does the delivery include protective packaging? The product is supplied in a transport case, protecting the instrument during shipping and making it convenient to store between uses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Built-In Caliper, Vertical Stainless Steel, Bidirectional Measurement, DIN 862 - Metav IndustryLine
Take advantage of high-resolution capacitive measurement and DIN 862 conformity to streamline in-line QC; the compact built-in design and bidirectional reading reduce cycle time and handling errors. Order the device directly via Metav Werkzeuge or consult the specialists for mounting and data-integration advice. Digital built-in caliper M218.254 — 150 mm, capacitive measuring system, 0.01 mm resolution Digital built-in caliper M218.254 is a DIN 862-compliant measuring module for workshop panels and machine interfaces, designed for vertical installation where robust, repeatable linear measurement is required Capacitive measuring system, 0.01 mm resolution 150 mm measuring range, DIN 862 compliant Bidirectional measurement capability Integrated mm/inch, zero and hold functions Reliable precision for workshop quality control The built-in caliper uses a capacitive measuring system with an electronic display resolution of 0.01 mm, delivering fast, numerical results suitable for statistical process control. The declared measuring uncertainty of ±0.03 mm defines its suitability for standard workshop inspection tasks where consistent repeatability is required. Compliance with DIN 862 provides a familiar reference for machinists and inspection personnel, ensuring the module integrates into established calibration and QA routines while reducing interpretation errors from analogue readouts. Space-saving mounting and practical operation features Designed as a vertical, built-in unit in a stainless steel housing, the device fits into machine doors, test fixtures or bespoke control panels without occupying bench space. The digital display offers a clear button set (ON/OFF/PRE-, mm/inch, 0/ABS-, TOL, DIR and HOLD) to simplify measurements and setup. The RB 5 data output enables connection to data loggers or readout systems, facilitating automated capture of measurement results and eliminating manual transcription steps that introduce errors into production logs. Application scope and handling benefits Classified in the Standard (100–300 mm) range, the caliper combines reach and rigidity for everyday applications in metalworking, toolmaking and component assembly. The bidirectional measurement function allows readings when the slide is moved in either direction, reducing handling time for repetitive checks. At approximately 0.45 kg, the unit is compact yet robust, making it suitable for permanent installation in jigs or as a fixed reference in production cells where quick, repeatable checks are required to maintain throughput and reduce scrap rates. For precision mounting and integration assistance with the Metav IndustryLine digital built-in caliper, contact Metav Werkzeuge for tailored advice on panel cut-outs, data cabling and calibration options — Metav Werkzeuge provides local stocking and technical support from Emmerich to streamline deployment. Technical Data Article number: M218.254 GTIN: 4054469111858 Manufacturer: Metav IndustryLine Norm: DIN 862 Facts Measuring range: 0–150 mm Display resolution: 0.01 mm Readout (inch): 0.0005 in Declared accuracy: ±0.03 mm Weight: 0.45 kg Tariff number: 90173000 Special features Capacitive measuring system Built-in vertical mounting, stainless steel housing Digital display with ON/OFF/PRE-, mm/inch-, 0/ABS-, TOL-, DIR-, HOLD buttons Bidirectional measurement capability Data output: RB 5 Digital implementation for panel or fixture integration FAQ Is this caliper suitable for panel mounting in a production machine? The caliper M218.254 is designed for built-in, vertical mounting and is suitable for installation in machine panels or jigs where a compact, repeatable measuring station is required. What level of accuracy can be expected in routine checks? The device provides a display resolution of 0.01 mm with a declared measuring uncertainty of ±0.03 mm, which is appropriate for standard workshop quality control tasks. Can the output be recorded automatically? Yes, the unit offers an RB 5 data output that allows integration with data loggers or PLCs to support automated result capture and process documentation. Which measurement modes are available on the display? The display includes mm/inch selection, absolute/relative zero setting (0/ABS), tolerance (TOL) indication, directional (DIR) and hold (HOLD) functions for flexible measurement workflows. Is the caliper corrosion-resistant for industrial environments? The built-in module is specified as stainless, which provides improved resistance to workplace atmospheres; final environmental suitability depends on the specific exposure conditions and enclosure installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper 0.001mm Resolution Inductive System IP67 Three-Point, Four-Function, Supplied in Case - Metav IndustryLine
Take advantage of a high-resolution 0.001 mm readout combined with IP67 protection and an inductive measuring system for reliable routine checks; order this caliper directly via Metav Werkzeuge or consult their specialists for application advice. M216.166 Digital caliper — 150 mm, 0.001 mm resolution, IP67 (Metav IndustryLine) The M216.166 Digital caliper is a compact, inductive 150 mm measuring tool with a high-resolution display and robust ingress protection, designed for precise workshop and inspection work. High-resolution 0.001 mm display IP67 protection for harsh environments Inductive measuring system for reliability Stainless steel (INOX) construction Measure small tolerances faster and with confidence The caliper delivers a 0.001 mm resolution on a clear digital display, which shortens inspection cycles by reducing reading uncertainty. Its inductive measuring system eliminates mechanical contact wear in the scale, maintaining stable results over time; this is particularly useful for frequent checks and serial inspection tasks. The instrument supports four measurement modes — exterior, interior, depth and step — enabling a single tool to replace several specialised gauges and thus streamline bench workflows. Built for demanding production environments With an IP67 rating and an INOX stainless steel body, the instrument resists dust ingress and temporary immersion, so measurements stay dependable on busy shop floors. The solid construction and the included locking screw secure the slider during handling, reducing the chance of inadvertent zero shifts. A compact overall weight of 0.4 kg keeps the caliper easy to manoeuvre during repetitive work while preserving the stiffness needed for reproducible measurements. Ergonomic display and practical functions to save time The readout offers quick mode changes including mm/inch selection, a MODE button and a 0/ON/OFF function for straightforward operation and fast switching between metric and imperial workflows. The short jaw length of 40 mm supports precise positioning on small components, while the standard 150 mm measuring range matches typical workshop requirements and supports efficient one-handed checking of machined parts. These features reduce handling time and help maintain a smooth production rhythm. Reliable baseline for quality control and documentation Designed to meet workshop and inspection demands, the caliper provides consistent results that integrate well into established quality routines; its specification indicates performance above standard DIN 862 expectations. The combination of high resolution, a sealed design and a robust measuring system makes it suitable for repetitive measurement tasks where traceability and repeatability are priorities. Metav IndustryLine’s presence in Emmerich adds an additional quality filter for supply and logistics across Europe. For robust, high-resolution measurement rely on the Metav IndustryLine M216.166 — contact Metav Werkzeuge in Emmerich for application guidance and dependable supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M216.166 GTIN: 4054469164915 ECLASS: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.001 mm Inch resolution: 0.00005 in Weight: 0.4 kg Jaw length: 40 mm Protection class: IP67 Special features Inductive measuring system INOX stainless steel material Digital display with MODE, mm/inch and 0/ON/OFF Locking screw for fixed measurements Four measurement modes: exterior, interior, depth, step Specification exceeds DIN 862 FAQ Is this caliper waterproof and suitable for the workshop? Yes. The M216.166 features an IP67 rating, making the caliper dustproof and resistant to temporary immersion — suitable for many workshop conditions. What measurement modes are available with this caliper? The instrument supports four measurement modes: exterior, interior, depth and step measurements, enabling versatile use across inspection tasks. What is the smallest increment that can be read? The digital readout provides a resolution of 0.001 mm (0.00005 in), allowing detection of very small dimensional changes during quality checks. Does the caliper require regular maintenance to keep accuracy? Routine cleaning and careful handling will preserve performance; the inductive scale minimises wear compared with mechanical systems, extending service intervals. Is this caliper suitable for use in production quality control? Yes. With its high resolution, robust construction and sealed design, the caliper is well suited for recurring quality-control measurements on machined parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper 0.01mm Resolution With Fraction Display 1/128, Stainless Hardened, Four‑Function, Case Included - Metav IndustryLine
Take advantage of precise, workshop-ready measurement with a 0.01 mm display and robust, hardened stainless construction for repeatable results; order directly via Metav Werkzeuge or consult the product specialists for application advice. Digital caliper 150 mm/6" — fraction display 1/128 (Metav IndustryLine) The Digital caliper 150 mm/6" is a compact workshop instrument for general machine and metalworking tasks, combining fine resolution with easy data transfer and a sturdy, hardened-steel build 0.01 mm digital resolution Stainless hardened steel construction mm/inch switching and 1/128 fraction display RB 2 data output for traceable transfer Precision where it counts With a 0.01 mm digital display and an inch resolution of 0.0005" / 1/128, this caliper delivers the clarity expected from standard digital measuring instruments. Classified in the standard range (max. 100–300 mm), it balances reach and stiffness for everyday tasks in machine shops and metalworking, where 150 mm lengths are the benchmark. The clear fraction display simplifies readings on parts specified in imperial fractions, while the familiar digital steps align with typical workshop quality and inspection routines, enabling reliable, repeatable results without specialist training. Versatile measurement and modern data handling The instrument supports four measurement modes — outside, inside, depth and step — making it suitable for a wide set of inspection tasks. The digital readout features dedicated ON/OFF, ZERO and mm/inch buttons for immediate toggling and zeroing. For traceable data capture and integration into quality processes the caliper is fitted with a RB 2 data output interface, enabling straightforward transfer to data loggers or inspection software. This combination of straightforward operation and connectivity reduces transcription errors and speeds up routine checks on production lines. Robust design for everyday workshop use Constructed from stainless hardened steel, the instrument resists wear in busy environments and maintains jaw geometry for consistent results. The measured jaw lengths (40/21) are optimised for access and stability across typical components. Delivery includes a protective case for safe transport and storage, reflecting the practical needs of workshops and service technicians. As part of the Metav IndustryLine, the caliper benefits from distribution from Emmerich, where Metav acts as a quality filter for the European market—supporting reliable supply and product consistency for professional users. For tailored advice on the Metav IndustryLine digital caliper and its fit for specific workshop tasks, contact Metav Werkzeuge to discuss specifications and application options directly. Technical Data SKU: M216.061 GTIN: 4054469110189 ECLASS: 21170344 Manufacturer: Metav IndustryLine Key figures Measuring range: 0–150 mm Display resolution: 0.01 mm Inch resolution: 0.0005" / 1/128 Jaw length: 40/21 Tariff code: 90173000 Special features Material: stainless hardened steel Digital display with ON/OFF, ZERO and mm/inch button Four measurement modes: outside, inside, depth, step Fraction display: 1/128 Data output: RB 2 Delivered in a protective case for transport Category: Calipers / Measurement devices FAQ Is this caliper suitable for everyday workshop measurement? The Digital caliper 150 mm/6" (Metav IndustryLine, SKU M216.061) covers the standard 0–150 mm range and is intended for routine machine‑shop and metalworking inspection tasks. What reading accuracy and fraction display does it provide? The instrument shows 0.01 mm resolution on the metric scale and an inch resolution of 0.0005", with a fraction readout of 1/128 for parts specified in imperial fractions. Which measurement functions are available? The caliper supports outside, inside, depth and step measurements, enabling versatile inspection of components and assemblies. Can measurement values be exported for documentation? Yes — the caliper is equipped with an RB 2 data output interface to transfer measurements to compatible data loggers or inspection systems for traceability. What material and protection does the caliper offer? Made from stainless hardened steel, the instrument resists wear; it is supplied in a protective case suitable for transport and workshop storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper 35mm Extra-Long Tips 0.01mm Resolution Four-Function Measurement, Supplied In Case - Metav IndustryLine
Combine 0.01 mm digital resolution with hardened stainless steel construction and extra‑long 35 mm jaws to achieve consistent, workshop‑grade measurements; order the calibrated‑ready tool directly via Metav Werkzeuge or consult Metav’s advisors for application guidance. Digital caliper 150 mm – extra‑long 35 mm jaws, 0.01 mm display (Metav IndustryLine) Digital caliper 150 mm — a compact, robust precision caliper for standard workshop and quality‑control tasks, offering extended jaw reach for recessed features and reliable data output. Digital display with 0.01 mm resolution Extra‑long 35 mm measurement tips Hardened stainless steel construction Four measurement functions incl. depth and step Precise, reliable measurements for daily workshop use The caliper delivers a 0.01 mm display resolution, making it suitable for routine inspection and process control where repeatability matters. The hardened stainless steel frame and metal housing resist wear, keeping the measuring faces stable during repeated use. With a compact 150 mm measuring range the instrument matches the standard class for workshop calipers, balancing reach, stiffness and single‑hand operation — a practical choice for mechanical workshops and production benches. The integrated digital display supports fast readings and reduces interpretation errors compared to non‑digital scales. Extended reach and versatile measurement capability Equipped with 35 mm extra‑long measuring tips and a longer jaw profile, the caliper is designed to access deep grooves and recessed features that short‑jaw models cannot. The tool supports four measurement functions — external, internal, depth and step — enabling a broad range of tasks with one instrument and cutting setup time. The device includes on/off, zeroing, unit selection and hold functions on the display, which improves efficiency during repetitive checks and when transferring mid‑process values to documentation. Data output and workshop integration for traceable workflows A dedicated RB 5 data output enables straightforward transfer of measurements to inspection software or data collection systems, supporting digital quality records. The caliper runs on a 3 V supply and remains lightweight at around 0.45 kg, which aids handheld operation over long shifts. Supplied to factory standard, the instrument is built for dependability in production environments and fits naturally into established inspection routines, enhancing throughput while maintaining measurement integrity. For applications requiring dependable, workshop‑grade precision, contact Metav Werkzeuge to discuss the Metav IndustryLine digital caliper with extra‑long jaws or request tailored advice from our Emmerich team via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M240.011.N GTIN: 4054469160269 eClass: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.45 kg Jaw lengths: 40/35 mm Supply voltage: 3 V Special features Material: hardened stainless steel, metal housing Digital display with ON/OFF, ZERO, UNIT and HOLD Four measurement functions: external, internal, depth, step Data output: RB 5 Label: Factory standard Suitable for standard workshop and quality control applications FAQ What measurement range does the caliper cover? The caliper covers a measuring range of 0–150 mm, placing it in the standard class for general workshop tasks. What resolution and display options are available? The instrument offers a digital 0.01 mm resolution and an inch reading of 0.0005 in, selectable via the UNIT button on the display. Can this caliper measure depth and steps as well as external sizes? Yes — the device supports four measurement modes: external, internal, depth and step measurements. Is there a data interface for recording measurements? Yes — the caliper provides an RB 5 data output for transfer to inspection systems or data loggers. What is the construction and durability of the caliper? Constructed from hardened stainless steel with a metal housing, the caliper is designed for robust, frequent workshop use. Is the instrument supplied ready for use from stock? The tool is supplied to factory standard and includes the features listed; please contact Metav Werkzeuge for details on calibration options. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper 40mm Jaw Depth With Ø5mm Probe Mount, Preset, Stainless Steel, Supplied In Case - Metav IndustryLine
Taking advantage of the combination of robust stainless housing, a 0–150 mm measuring range and the convenience of preset zeroing plus seven pairs of gauge inserts ensures consistent workshop throughput and flexible inspection capability; order directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Uni‑MS 150 mm Precision Caliper — stainless steel, bore Ø 5 mm, preset function (Metav IndustryLine) Digital Uni‑MS 150 mm Precision Caliper is a compact digital measuring instrument designed for standard workshop metrology tasks where repeatable internal and external checks are required; the integral holder for Ø 5 mm gauge inserts extends application flexibility. Digital display with preset function Stainless steel housing for longevity Includes 7 pairs of gauge inserts Measuring range 0–150 mm standard class Reliable measurements for everyday workshop tasks This instrument is built for the standard workshop bracket: a 0–150 mm measuring range paired with a display resolution of 0.01 mm provides a practical balance of reach and fineness for machining and assembly controls. Digital calipers in this class typically adhere to industry tolerances (for reference: around ±0.02 mm up to 100 mm and ±0.03 mm up to 300 mm), which makes the device suitable for routine quality control, setup work and serial checks. The clear digital display and the preset function accelerate repetitive tasks and reduce operator-induced variation, supporting a measurable increase in throughput. Quick setup and flexible gauging for small runs and fixtures Equipped with a preset (SET/PRESET) function and delivered with 7 pairs of gauge inserts, the instrument allows fast changeover between gauge sizes without ad hoc adjustments. The supplied holder accepts probes or inserts via a Ø 5 mm mounting, enabling dedicated internal probing or fixture-based measurements. This configuration shortens cycle times in inspection routines and simplifies adaptation to different part geometries, turning a single measuring tool into a multi‑purpose gauge for both in‑process checks and bench inspection. Robust design, simple power and seamless data transfer A metal housing constructed for workshop environments ensures long service life and resistance to handling wear; at approximately 0.5 kg the instrument is portable yet stable during measurement. Operation runs from a 3 V power source and the unit offers a RB 5 data output for connection to digital readout or data logging systems, permitting traceable measurement records and straightforward integration into existing documentation routines. The device is supplied to factory standard (Werksnorm) and benefits technicians who prioritise dependable, easy‑to‑use measuring equipment. Contact Metav Werkzeuge for tailored advice on integrating the Digital Uni‑MS 150 mm precision caliper into production workflows and to confirm delivery and availability from Emmerich. Technical Data Article number: M240.207.N GTIN: 4054469160016 Tariff number: 90173000 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Weight: 0.5 kg Power supply: 3 V Special features Metal housing (INOX / stainless steel) Preset function with ON/OFF and SET/PRESET buttons Holder for gauge inserts Ø 5 mm Includes 7 pairs of gauge inserts Data output: RB 5 Factory standard (Werksnorm) Digital display FAQ What measuring range and resolution does the instrument offer? The Digital Uni‑MS 150 mm precision caliper from Metav IndustryLine covers 0–150 mm with a display resolution of 0.01 mm, suited to typical workshop inspection tasks. Are gauge inserts included with the caliper? Yes, delivery includes seven pairs of gauge inserts and a Ø 5 mm holder for quick fitting of the supplied probes. How is the caliper powered and can it export measurements? The instrument runs on a 3 V supply and provides an RB 5 data output for connection to readout or data‑logging systems. Is the housing corrosion resistant for workshop use? The caliper features an INOX stainless steel housing that improves resistance to workshop wear and corrosion. Is the instrument delivered with a calibration certificate? The unit is supplied to factory standard (Werksnorm); specific calibration certificates are not indicated with this item Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper ABS System, TIN Coating, 0.01mm Resolution, 3V, Four-Function Measurement, Supplied in Case - Metav IndustryLine
Durable workshop measurement with TiN-coated jaws, 0.01 mm resolution and an RB 5 data interface for seamless documentation; order the digital caliper directly via Metav Werkzeuge or consult our specialists if advice is required. Digital caliper M216.245.N (Metav IndustryLine) — 150 mm, TiN-coated, Absolute ABS system The Digital caliper M216.245.N is a 150 mm absolute digital caliper intended for precise internal, external, depth and step measurements in mechanical engineering, production control and general workshop use. 0.01 mm resolution for precise measurements TiN-coated hardened stainless steel jaws Absolute ABS system with ORIGIN and UNIT keys RB 5 data output for digital integration Precision that supports consistent quality control The caliper delivers a resolution of 0.01 mm and an inch reading of 0.0005 in, making it suitable for routine quality checks and workshop tolerances. The absolute measuring system (ABS) maintains reference position after power cycles, reducing setup time and preventing reference drift. Conformance to DIN 862 is signalled through its construction and scale layout, providing a familiar standard for engineers and inspectors. The measurable benefit is a faster, reproducible inspection routine that reduces rework and supports production throughput. Robust construction for everyday workshop demands Constructed from hardened stainless steel with a glass guide on the scale, the instrument resists corrosion while preserving sliding accuracy. The TiN coating on the contact surfaces increases wear resistance and extends service life in busy production environments. At 0.36 kg, the instrument balances rigidity and handling comfort; the jaw geometry (40/21 mm) allows stable contact on small and medium components. These design choices translate into longer maintenance intervals and dependable performance under regular use. Simple operation, clear readout and data-ready output The clear digital display includes ORIGIN, UNIT, ON/OFF and 0/ABS keys for immediate control and unit switching. The caliper runs on a 3 V supply and features an RB 5 data output for connection to data loggers or inspection software, supporting traceable measurement workflows and basic digitisation of inspection records. This connectivity streamlines documentation and reduces transcription errors, which is advantageous for batch testing or integration into existing quality systems. Versatility across common workshop tasks Classified in the Standard range (measuring range up to 300 mm), this 150 mm instrument is sized for the typical demands of machining and metalworking shops. The fourfold measurement capability supports internal, external, depth and step measurements without additional attachments, simplifying task switching on the bench. The caliper is also usable with or without a drive roller, which increases compatibility with different measuring set-ups and operator preferences. This versatility makes it a practical, all-round tool for both production and inspection. Contact Metav Werkzeuge for personalised advice on integrating the Metav IndustryLine digital caliper M216.245.N into existing inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com for guidance and ordering Technical data Article number: M216.245.N GTIN: 4054469160047 Standard: DIN 862 Facts Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.36 kg Measuring system: Absolute, 3 V Data output: RB 5 Special features Material: hardened stainless steel; scale with glass slide; TiN-coated Display: digital with ORIGIN / UNIT / ON/OFF / 0/ABS buttons Measurement types: internal, external, depth and step Jaw length: 40/21 mm Compliant: DIN 862 Usable with or without drive roller FAQ What measurement tasks can be performed with this caliper? The M216.245.N supports internal, external, depth and step measurements and is aimed at routine machining and inspection tasks in workshops and production. Is the caliper suitable for integration into digital inspection workflows? Yes, the caliper provides an RB 5 data output for connection to data loggers or inspection software to support traceable measurement records. What level of accuracy can be expected? The instrument offers a display resolution of 0.01 mm and an inch equivalent of 0.0005 in, suitable for standard industrial tolerance checks. Which standards and materials describe the construction? The caliper is built to DIN 862, features hardened stainless steel construction with a glass guide, and has TiN coating on the measuring faces for enhanced durability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Absolute ABS Display, Tolerance LED, IP54, Absolute System, 0.01mm Resolution, Four-Function, Supplied in Case - Metav IndustryLine
Benefit from the combination of robust IP54 protection, reliable 0.01 mm resolution and the ABS absolute system for reproducible measurements; order the M216.221 directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper M216.221 — 150 mm, TOL‑LED & ABS absolute system (Metav IndustryLine) A Digital Caliper M216.221 designed for precise workshop and quality‑control tasks with a 150 mm measuring range, tolerance LED and splash‑resistant protection. 150 mm measuring range with 0.01 mm resolution TOL‑LED for quick tolerance checks ABS absolute system with origin function IP54 splash‑resistant stainless steel design Precise measurement that speeds up quality checks The M216.221 delivers a 0.01 mm display resolution together with accuracy conforming to DIN 862, combining clear numerical feedback and fast decision making on the shop floor. The integrated TOL‑LED provides an immediate visual pass/fail indication, reducing inspection time for repetitive tasks and supporting consistent quality control. With the ABS absolute system the datum is retained without the need for continuous re‑zeroing, so measurements remain reliable even after temporary battery removal. Built for robust daily use and versatile measuring tasks Constructed from hardened stainless steel with a glass scale, the instrument resists routine wear while keeping sliding action smooth. The device is rated IP54, offering splash and dust protection that suits standard workshop environments. The caliper supports four types of measurement — external, internal, depth and step — which makes it versatile for components and assemblies; the digital display includes ORIGIN, MODE, TOL and INC/ON/OFF controls for flexible operation. The compact jaw geometry (40/21 mm) and a weight of 0.4 kg balance manoeuvrability with stiffness, and delivery in a protective case simplifies transport and storage. Practical classification and why it fits most workshops With a 150 mm measuring range the instrument falls into the standard caliper category, offering the best compromise of reach, rigidity and single‑handed usability for everyday machine‑shop tasks. The combination of TOL‑LED, solid construction and an absolute measuring system supports efficient production routines and repeatable results across batch inspections. Backed by Metav IndustryLine’s distribution and quality processes, the tool integrates into existing inspection workflows and contributes to a dependable measurement standard across teams. Contact Metav Werkzeuge today for a technical consultation and local supply from Emmerich — choose the M216.221 for dependable tolerance checks, splash resistance and fast, repeatable measurements Technical data Article number: M216.221 GTIN: 4054469164212 Weight: 0.4 kg Material: hardened stainless steel, scale with glass rail Measuring range: 0–150 mm Resolution: 0.01 mm Protection class: IP54 Display: ORIGIN, MODE, TOL, INC / ON / OFF Facts Measuring range: 0–150 mm Resolution (display): 0.01 mm Jaw length: 40 / 21 mm Weight: 0.4 kg ECLASS: 21170344 Tariff code: 90173000 Special features ABS absolute measuring system (3 V) TOL‑LED tolerance indicator Four measurement functions: external, internal, depth, step Accuracy according to DIN 862 Digital operation with ORIGIN / MODE / TOL / INC / ON‑OFF keys Delivered in protective case FAQ What measurement types can be performed with this caliper? The Metav IndustryLine Digital Caliper M216.221 performs external, internal, depth and step measurements, enabling a wide range of inspection tasks. What resolution and standard compliance does the caliper offer? The caliper provides a 0.01 mm display resolution and meets the accuracy requirements stated under DIN 862 for this class of instrument. Is the instrument suitable for workshop environments? Yes — the M216.221 features hardened stainless steel construction and an IP54 rating, which together make it suitable for regular use in machine shops and production areas. Does the caliper provide tolerance checking and which controls are available? Tolerance checking is available via the TOL‑LED; the digital interface includes ORIGIN, MODE, TOL and INC/ON/OFF controls to support tolerance and incremental measurements. How is the caliper delivered and what are its key physical dimensions? The Metav IndustryLine Digital Caliper M216.221 is supplied in a protective case, weighs 0.4 kg and has jaw lengths of 40 mm and 21 mm for the main and depth jaws respectively. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Absolute ABS With Round Depth Rod, Stainless Steel, 0.01mm Resolution, Three-Point Measurement, Supplied In Case - Metav IndustryLine
The combination of an ABS system, 0.01 mm display resolution and a hardened stainless steel construction ensures reliable workshop measurements with repeatable results; the optional thumb roller and depth rod speed up routine checks. Order the Digital Caliper M216.238.N directly via Metav Werkzeuge or request advice from our consultants. Digital Caliper M216.238.N — 150 mm ABS system, hardened stainless steel, optional thumb roller The Digital Caliper M216.238.N is a 150 mm absolute digital caliper for workshop and inspection use, offering depth measurement and an optional thumb roller for smooth, repeatable handling. 150 mm absolute digital system ABS 0.01 mm resolution, ORIGIN/UNIT/0/ON-OFF keys Hardened stainless steel with glass scale Depth rod and optional thumb roller Workshop-grade accuracy for daily inspection The caliper is built around an ABS system that preserves the reference position when powered off, delivering stable readouts for routine quality checks. With a standard 0.01 mm display resolution and conformity to DIN 862, the instrument provides the measurable precision expected in machine shops and metalworking environments. Classified as a Standard caliper (measuring range up to 300 mm), it balances reach and rigidity, making it suitable as a daily inspection tool for components, assemblies and incoming goods checks while ensuring straightforward traceability of measurements. Ergonomic handling that speeds routine measurement Ergonomic refinements reduce cycle time and operator fatigue: the optional thumb roller enables controlled slide movement for quick, single-handed positioning, while the compact weight and low profile support steady contact pressure. The display features ORIGIN, UNIT, 0/ABS and power controls for fast zeroing and unit changes; a dedicated data output (RB 5) allows measurement transfer to inspection software or data loggers for digital documentation. The integrated depth measurement probe and finely finished glass scale contribute to reliable results across external, internal, depth and step measurements, improving throughput without sacrificing repeatability. Built for traceability and workshop reliability Mechanical durability comes from hardened stainless steel construction and a wear-resistant glass scale that keeps graduations legible over prolonged use. The caliper supports all four common measuring functions — external, internal, depth and step — so fewer tools are needed at the bench. Delivered in a protective case for safe transport and storage, the design reduces the risk of transit damage and maintains calibration between jobs. For operations seeking consistent inspection outcomes, this instrument offers robust handling, clear readout and a data interface to integrate with quality workflows. For consistent, workshop-ready measurement and straightforward integration, contact Metav Werkzeuge in Emmerich for supply and technical guidance on the Digital Caliper M216.238.N. Technical data Article number: M216.238.N GTIN: 4054469159386 Category: Calipers Commodity code: 90173000 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Resolution (inches): 0.0005 in Weight: 0.35 kg Measuring system: Absolute (3 V) Special features Material: hardened stainless steel, scale with glass rail Digital display: ORIGIN / UNIT / ON-OFF / 0/ABS Data output: RB 5 Four measurement functions: external, internal, depth, step Depth measurement included Optional thumb roller for controlled sliding Delivered in protective case Standard: DIN 862 Digital caliper (absolute) design FAQ What measurement range and resolution does the caliper offer? The Digital Caliper M216.238.N has a measuring range of 0–150 mm with a display resolution of 0.01 mm (0.0005 in). Can this caliper perform depth and step measurements? Yes, the instrument supports depth and step measurement in addition to external and internal measurements, covering the four common functions required at the bench. Is the caliper suitable for daily workshop use and inspection? Built from hardened stainless steel with a glass scale and compliant with DIN 862, the caliper is designed for regular workshop and inspection tasks. How can measurement data be exported from the device? The caliper provides a data output (RB 5) for integration with data loggers or inspection software to support digital documentation. Does the delivery include a protective case and is a thumb roller fitted? The caliper is supplied in a protective case for transport; a thumb roller is available as an optional feature or without, depending on the selected configuration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Absolute Slide With 0.02mm Resolution, IP54 Plastic Case - Metav IndustryLine
Combining 0.02 mm accuracy with IP54 protection and an absolute measuring system provides dependable workshop measurements and consistent quality control; order the instrument directly via Metav Werkzeuge or request advice from our consultants. Digital Caliper 150 mm, IP54 (DIN 862) — Metav IndustryLine The Digital Caliper 150 mm, IP54 (DIN 862) is a compact, workshop-ready absolute caliper for precise external, internal, depth and step measurements in standard machining environments. IP54 protection for dusty and damp environments Absolute measuring system with 0.02 mm accuracy Stainless steel construction with glass scale RB 6 data output for digital integration Robust accuracy for everyday metrology This caliper delivers 0.02 mm accuracy on an absolute measuring system, a combination that gives reliable, repeatable readings across routine inspection tasks. The stainless steel body with a glass scale resists wear while maintaining stable guidance, so measurements remain consistent over time. Built to the DIN 862 standard, the instrument suits general metalworking and maintenance use where a balance of reach and stiffness is required. Clear digital readout and data connectivity The instrument features a digital display with on/off, 0/ABS, mm/inch and Origin controls for intuitive operation. A RB 6 data output permits straightforward connection to data loggers or inspection software, enabling traceable records and faster quality workflows. The display resolution and measurement logic reduce interpretation errors, which speeds up checking procedures and supports process documentation in production environments. Four measurement modes and practical handling Equipped for four-fold measurement (external, internal, depth and step), the caliper replaces several single-purpose gauges, saving bench space and simplifying inspection sequences. The compact 150 mm format is classified in the standard range for workshop calipers, offering an optimal compromise between reach and rigidity that enhances single-hand handling and repeatable results for typical machine‑shop components. Durable protection and transport convenience With IP54 ingress protection and delivery in a protective case, the device withstands workshop conditions and is safer to store and transport between job sites. The lightweight construction (approx. 0.4 kg) and secure jaws reduce operator fatigue during repeated checks, while the battery-powered electronics (3 V CR2032) keep downtime to a minimum. For workshop-ready precision with robust protection, request the Metav IndustryLine Digital Caliper M216.255 from Metav Werkzeuge GmbH or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification support Technical Data Article number: M216.255 GTIN: 4054469182551 Eclass: 21170344 Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution / display: 0.02 mm Accuracy: ±0.02 mm Weight: 0.4 kg Battery: 3 V CR 2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: Absolute Measurement modes: external, internal, depth, step Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, Origin button Delivered in protective case for transport FAQ Is the caliper suitable for workshop environments with splash and dust? The Digital Caliper 150 mm meets IP54 and is designed for dusty and damp workshop conditions, providing protected operation without compromising accuracy. Can measurement data be exported to inspection software? Yes. The instrument includes a RB 6 data output for direct connection to data loggers or PC systems to streamline record keeping. Which measurement types are possible with this caliper? This caliper supports four measurement tasks: external, internal, depth and step measurements, covering most routine inspection needs. What is the display resolution and typical accuracy? The digital readout displays at 0.02 mm resolution, with an accuracy of ±0.02 mm, suitable for standard machine‑shop quality control. Is the caliper supplied ready for transport and storage? The tool is supplied in a protective case for safe transport and workshop storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Absolute System Removable Roller IP54 - Metav IndustryLine
Take advantage of the combination of high-resolution digital measurement, robust IP54 protection and a removable drive roller for reliable shop-floor performance; order the instrument directly via Metav Werkzeuge or contact our consultants for technical advice. Digital Caliper M216.225 – 150 mm Absolute system, IP54 (Metav IndustryLine) The Digital Caliper M216.225 is a 150 mm precision workshop caliper with an absolute measuring system and a removable drive roller, designed for everyday use in metalworking and general industrial measurement. 150 mm hardened stainless steel body Absolute measuring system, reliable origin memory IP54 dust and splash protection Removable drive roller for tight measurements Precise, repeatable readings for production control The caliper brings high-resolution measurement to routine quality checks: the digital readout provides 0.01 mm resolution and 0.0005 in display, enabling immediate, clearly legible values that reduce interpretation errors on the shop floor. The integrated absolute system maintains a reference position after power loss, so measurements remain consistent without frequent re-zeroing. This combination of steadiness and fine resolution supports faster inspection cycles and more reliable process control in daily production. Built to withstand workshop conditions A hardened stainless steel beam and a glass scale ensure mechanical stability and long-term readability while the instrument’s IP54 rating offers protection against dust and splashes typical in machine shops. The caliper’s mass and construction strike a balance between stiffness and handling: it remains easy to manoeuvre during single-handed checks yet resists bending during normal use. The unit is usable with or without the supplied drive roller, increasing flexibility when measuring narrow or recessed features. Practical handling and digital integration The display features ON/OFF, 0/ABS, mm/inch and ORIGIN buttons for intuitive operation and quick unit changes. An RB 6 data output enables straightforward transfer of measurements to data-collection systems or quality documentation, reducing manual entry and the associated error risk. The instrument supports fourfold measurement modes—external, internal, depth and step—so a single gauge covers the most common dimensional checks in workshop environments, simplifying tool sets and inspection routines. Designed for the workshop: classification and applications With a measuring range of 0–150 mm, this caliper falls into the standard category for machine and metalworking applications, offering the best compromise between reach and rigidity for 150/200/300 mm workshop baselines. The combination of a driven roller option and compact jaw geometry makes it particularly suitable for measuring small components, fittings and machined features where access is limited. The robust construction and clear digital feedback are aimed at teams requiring dependable daily measuring tools rather than laboratory-only instruments. For precise workshop measurement from the Metav IndustryLine range, contact Metav Werkzeuge for a technical consultation or to confirm availability from Emmerich: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Item: M216.225 GTIN: 4054469158280 Article number / SKU: M216.225 Material: hardened stainless steel; scale with glass slide Protection class: IP54 Measuring system: Absolute with 3 V Data output: RB 6 Display: digital with ON/OFF, 0/ABS, mm/inch and ORIGIN buttons Removable drive roller included Facts Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.4 kg Jaw lengths: 40/21 mm Tariff number: 90173000 Special features Fourfold measurement: external, internal, depth, step Applicable with or without drive roller Durable hardened stainless-steel construction Glass scale for precise guidance IP54 dust and splash protection RB 6 data interface for digitised workflows Absolute measuring system for stable origin memory FAQ What measurement modes does this caliper support? The caliper supports external, internal, depth and step measurements; the Digital Caliper M216.225 covers the common fourfold measurement tasks required in workshop inspection. Is the instrument suitable for shop-floor use with coolant or swarf present? Yes. The IP54 enclosure and hardened stainless steel beam of the M216.225 provide protection against dust and splashes typical in machining environments. Can measurements be recorded electronically from the caliper? Measurements can be exported via the RB 6 data output interface, which enables integration with data-collection systems and reduces manual transcription. How fine is the display resolution and which units are available? The digital readout delivers 0.01 mm resolution and 0.0005 in in inch mode; the display can be toggled between millimetres and inches via the mm/inch button. For which workshop tasks is this 150 mm caliper best suited? Classified as a standard range caliper, the 150 mm size is ideal for everyday machine-shop checks, small assemblies and fitting inspections where reach and rigidity must be balanced. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Antimagnetic With Round Depth Rod, Four‑Function Display, Stainless Steel - Metav IndustryLine
Combine non-magnetic stainless-steel construction, a clear digital display with ON/OFF, ZERO, UNIT and HOLD functions, and four measurement modes for reliable, everyday workshop metrology; order the Digital Caliper M216.175 directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Digital Caliper M216.175 — 150 mm, non-magnetic stainless The Digital Caliper M216.175 is a 150 mm precision measuring instrument for general workshop and laboratory use, offering inside, outside, depth and step measurement with a clear digital readout and data output for traceable results. 150 mm measuring range Non-magnetic stainless-steel construction Four-function measurement capability Digital display with ON/OFF, ZERO, UNIT, HOLD Consistent workshop accuracy with a standard form factor The 150 mm measuring range places this instrument in the standard class for workshop metrology, balancing reach and rigidity for everyday tasks. Constructed from non-magnetic stainless steel, the caliper resists corrosion and reduces magnetic interference at the measuring face, which helps preserve measurement stability when working near ferrous components. The jaw geometry (40/21 mm) and overall weight of 0.3 kg keep the tool easy to handle while retaining the stiffness required for repeatable readings, so routine inspections and setup checks become faster and more dependable. Immediate readings and straightforward data transfer A high-contrast digital display provides clear numeric results and is operated via the ON/OFF, ZERO, UNIT and HOLD buttons for quick zeroing, unit changes and value retention. The instrument includes a data output (RB 5) interface for connection to data-collection systems or inspection software, enabling efficient documentation and integration into quality workflows. Power is supplied at 3 V, which keeps the electronics compact and simple to maintain; the familiar control layout shortens the learning curve for production staff and quality inspectors. Four measurement functions to cover typical shop tasks Equipped for inside, outside, depth and step measurement, the caliper replaces multiple hand gauges in common workshop routines. The rounded depth gauge allows reliable probing of grooves and recesses, while the precise measuring faces are suitable for quick pass/fail checks and setup verification. Compliance with DIN 862 ensures the tool follows recognised standards for caliper form and function, making it straightforward to compare results across shifts and machines without ambiguity. Robust presentation and practical handling For transport and storage the instrument is supplied in a protective case suitable for workshop use, reducing the risk of accidental damage during handling. The non-magnetic stainless construction and solid feel deliver confidence during repetitive measurement cycles, and the compact footprint supports one-handed use during machine setup or inspection routines. With its practical feature set, the caliper is an efficient choice for maintenance crews, toolroom staff and quality technicians seeking a durable, easy-to-integrate measuring device. For reliable, workshop-ready precision from Metav IndustryLine, contact Metav Werkzeuge for purchase guidance or technical clarification — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 — Metav Werkzeuge can advise on compatibility and procurement of the M216.175 for your measurement tasks Technical data Article number: M216.175 GTIN: 4054469168210 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–150 mm Maximum measuring range: 150 mm Weight: 0.3 kg Jaw length: 40/21 mm Power: 3 V Customs tariff number: 90173000 Features and materials Material: non-magnetic stainless steel Four-function measurement: inside, outside, depth, step Digital display with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Standard: DIN 862 Rounded depth gauge Supplied in protective case for transport FAQ What types of measurements are possible with this caliper? The M216.175 supports inside, outside, depth and step measurements, covering the four common caliper functions needed for workshop inspections. Is the instrument suitable for use near magnetic components? Yes — the body and measuring faces are made from non-magnetic stainless steel, which reduces magnetic influence during measurement and improves stability around ferrous parts. How can measurement data be exported from the caliper? Data can be transferred using the built-in RB 5 data output, enabling connection to data-collection systems or SPC software for traceable recording of results. Which standard does the caliper comply with and what does that mean? The instrument conforms to DIN 862, which defines caliper design and functional requirements for workshop-grade measuring tools, ensuring consistent form and usability across comparable devices. How is the caliper delivered and protected for transport? The M216.175 is supplied in a protective case suitable for transport, which helps prevent damage during handling and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Double-Tip Probes 0.01mm Resolution, Data Output RB5, Plastic Case - Metav IndustryLine
Combining 0.01 mm resolution, double‑tipped jaws and a hardened stainless‑steel frame delivers dependable, repeatable measurements for workshop and quality‑control tasks; order the M240.010.N directly via Metav Werkzeuge or ask our consultants if needed. M240.010.N — Digital caliper 150 mm, double‑tipped, stainless steel (Metav IndustryLine) The M240.010.N is a precision digital caliper with double tips and a 150 mm measuring range, designed for accurate inside, outside, depth and step measurements in workshop, inspection and production environments. Digital display 0.01 mm resolution Double‑tipped jaws for narrow features Hardened stainless steel with metal housing Four measurement functions: inside/outside/depth/step Precision and measurable confidence for routine inspection The instrument provides a resolution of 0.01 mm (0.0005 in), which places it within the standard digital caliper class for machine‑shop measurement. This resolution, combined with a robust measuring system powered by 3 V, enables clear numeric read‑outs for pass/fail checks and dimensional documentation. The double‑tipped jaws allow access to confined or narrow features that single‑ended calipers cannot reach, so measurements of bores, grooves or slim edges are recorded with the same repeatability as external dimensions. The result is a reliable metrology tool that reduces rework and supports quality assurance processes through consistent, verifiable data. Features that increase throughput and traceability Equipped with an easy‑to‑use digital display and function keys (ON/OFF, ZERO, UNIT, HOLD), the caliper simplifies measurement routines and reduces operator time per inspection. The HOLD function secures the reading for transfer tasks; the ZERO and UNIT keys speed comparative measurements and metric/imperial switching. An integrated RB 5 data output is provided for measurement data capture and process logging, enabling quick transfer to inspection software or manual records that streamline traceability and reporting. These design choices support productivity and a clear audit trail in production and quality departments. Robust construction tailored to workshop conditions Manufactured from hardened stainless steel with a metal case, the caliper resists wear and maintains jaw geometry under frequent use, which safeguards measurement accuracy over time. The instrument’s mass (0.58 kg) contributes to stable handling without compromising portability for bench or on‑machine inspections. As a standard‑range caliper (0–150 mm), it balances reach and stiffness for general machine‑shop and metalworking tasks, offering the workshop a versatile primary measuring tool. For operations that require multiple measurement types in a single instrument, the built‑in capability for inside, outside, depth and step measurements reduces tool changeovers and simplifies fixture setups. Integration and usability in industrial workflows The numeric clarity of the display and the option to hold or zero readings make the caliper practical for repetitive quality checks, while the RB 5 data output supports digital collection and statistical process control. The device is suitable for incoming inspection, first‑article checks and shop‑floor verifications where consistent documentation is required. Caliper operation is straightforward enough for trained technicians and precise enough for use as a benchmark against which other hand tools are compared, helping to maintain overall measurement confidence across the production line. For reliable, everyday precision choose the Metav IndustryLine caliper M240.010.N — order through Metav Werkzeuge or consult the Metav team for specification advice and integration options. Technical data Article number: M240.010.N GTIN: 4054469160252 Manufacturer: Metav IndustryLine Core figures Measuring range: 0–150 mm Resolution: 0.01 mm (0.0005 in) Weight: 0.58 kg Power supply: 3 V Special features Material: hardened stainless steel, metal housing Display functions: ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Measurement types: inside, outside, depth, step FAQ What measuring range does this caliper cover? The caliper covers 0–150 mm and is classified as a standard‑range instrument suitable for general machine‑shop and metalworking tasks; the M240.010.N supports most everyday inspection needs. Can this instrument measure internal and external dimensions? Yes. The double‑tipped jaw geometry and the device’s design enable inside and outside measurements as well as depth and step readings, providing four measurement functions in one tool. How precise is the digital display on the caliper? The display shows readings to 0.01 mm (0.0005 in), which is the standard resolution for digital calipers used in workshop inspection and quality control. Is data capture possible from the caliper? Yes. The caliper is equipped with an RB 5 data output for connection to data collection systems or inspection software to support traceability and reporting. What materials and construction ensure longevity? The caliper is constructed from hardened stainless steel with a metal housing, providing durability and maintaining jaw geometry under regular shop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Fibreglass Large 16mm Display 0.1mm Resolution Battery Powered Blister Pack - Metav IndustryLine
Take advantage of the combination of clear large-digit readout, fibreglass lightness, and workshop‑grade 150 mm range for efficient, repeatable checks on everyday components; order directly via Metav Werkzeuge or consult the specialists for application advice. Digital caliper M216.073 by Metav IndustryLine — 150 mm, fibreglass, 0.1 mm resolution Digital caliper M216.073 offers a compact, easy-to-read measuring solution for routine workshop tasks and quality checks across general metalworking and maintenance applications. Fibreglass body, corrosion resistant 150 mm measuring range 0.1 mm digital resolution Large 16 mm high-contrast digits Clear legibility for fast inspection and fewer errors The instrument features a large 16 mm digit height on the display, which significantly reduces reading time in busy production or maintenance environments. Combined with a straightforward digital interface — including ON/OFF, ZERO and mm/inch functions — the device streamlines routine dimension checks. The 0.1 mm resolution positions this caliper for standard workshop accuracy, making it suitable for general machining and assembly tasks where rapid, unambiguous readings are more important than micrometre-level precision. This balance of readability and sufficient accuracy supports quicker decision‑making on the shop floor and reduces the risk of rework caused by misreading small displays. Lightweight fibreglass design that withstands daily use Constructed from fibreglass, the gauge remains exceptionally light (approx. 0.1 kg) while offering good resistance to corrosion and everyday knocks. The material choice lowers operator fatigue during repetitive measuring routines and enables safe use in environments where metal calipers could mark soft surfaces. The instrument’s 150 mm range places it in the standard caliper category, which is the most versatile size for workshops: it combines reach, stiffness and single‑hand handling for measurements on shafts, housings and interfaces commonly encountered in production and repair work. The compact form factor and blister packaging facilitate tidy storage and straightforward distribution within tools cupboards. Practical controls and ergonomic handling to increase throughput Ergonomic jaw geometry with a beak length of 40 mm provides stable contact for external and internal measurements, while the simple digital control scheme reduces training time for new operators. The lightweight slider and intuitive button layout enable swift zeroing and unit changes, improving throughput during repetitive inspection cycles. The caliper is supplied with basic workshop calibration and is targeted at organisations seeking reliable, low‑maintenance tools for standard quality control tasks. Integration into daily workflows is straightforward, and the device complements a broader toolset from Metav IndustryLine for centralised procurement and consistent performance across the shop. For straightforward, readable workshop measurement from Metav IndustryLine, order the M216.073 through Metav Werkzeuge or request tailored application advice by phone or e‑mail — Metav’s specialists in Emmerich are ready to assist. Technical Data Article number: M216.073 GTIN: 4054469182834 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.1 mm Digit height: 16 mm Weight: 0.1 kg Beak length: 40 mm Voltage: 3 V Special features Material: fibreglass Display: ON/OFF, ZERO, mm/inch Packaging: blister pack Suitable category: Standard caliper (100–300 mm range) SKU: M216.073 FAQ Is this caliper suitable for precision workshop checks? The Digital caliper M216.073 delivers 0.1 mm resolution and a 150 mm range, which suits standard workshop and assembly inspections where rapid, reliable readings are required rather than sub‑micrometre measurement. What materials is the caliper designed to cope with? The fibreglass construction of the M216.073 is corrosion resistant and robust for everyday handling; it is appropriate for general metalworking and maintenance tasks but is not intended as a replacement for metrology‑grade instruments on high‑precision materials. Does the display offer both metric and imperial units? Yes, the instrument provides mm/inch conversion via the dedicated display button to support mixed workflows and simplify documentation across projects. Is a calibration certificate included? The tool is supplied with standard workshop calibration suitable for routine quality control. If a higher level of traceable certification is required, Metav Werkzeuge can advise on appropriate calibrated solutions. What power source does the caliper use and how long does it last? The caliper operates from a 3 V cell. Actual service life depends on usage patterns and switch‑off behaviour; the ON/OFF control is provided to preserve battery life during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper For Wall Thickness Measurement With 0.01mm Resolution, Stainless Steel Body, Supplied In Case - Metav IndustryLine
Take advantage of precise digital measurement, robust hardened stainless steel construction and a practical 4–150 mm measuring range for reliable wall‑thickness checks across workshop and production environments. Order the instrument directly via Metav Werkzeuge or consult Metav’s advisors for specification support. Digital Caliper for Wall Thickness Measurement M240.071.N – 4–150 mm, stainless steel (Metav IndustryLine) The Digital Caliper for Wall Thickness Measurement M240.071.N is a compact, workshop‑grade instrument intended for precise thickness checks on pipes, tubes and thin‑walled components using a clear digital readout. Measuring range 4–150 mm Resolution 0.01 mm (0.0005 in) Hardened stainless steel construction Accurate wall‑thickness readings for routine inspection Built around a fine 0.01 mm display step, the caliper delivers repeatable digital readings suitable for standard quality control and production tasks. The instrument records measurements in both metric and imperial units, with the inch equivalent shown as 0.0005 in, enabling straightforward comparison with legacy documentation. The clear electronic display includes ON/OFF, ZERO, UNIT and HOLD functions for efficient part sampling and interim value capture. For wall‑thickness inspection tasks where throughput and comparability matter, the electrical readout and compact jaw geometry support rapid, verifiable checks without compromising readability. Built to withstand workshop conditions The frame and sliding parts are manufactured from hardened stainless steel and housed in a metal enclosure to resist wear and maintain measurement stability. Classified within the Standard measuring range (best for universal machine‑shop needs), the instrument balances reach and stiffness for everyday use at 150 mm. A transport protective case is provided to simplify handling and to protect the tool during transfer between workstations; this contributes to long‑term dimensional stability and reduced risk of damage when stored or moved on the shop floor. Fast readings and traceable data for quality workflows Practical features include a modest mass of 0.48 kg and a jaw length of 45 mm, which together aid steady handling while measuring curved or thin sections. The caliper is powered by a 3 V cell and offers a data interface labelled RB 5 for integration into documentation workflows where digital output is required. The combination of a concise display increment and an exportable signal enhances repeatability and supports traceable measurement routines in small‑series production or incoming inspection. Wherever reproducible checks are needed, the instrument provides the core functions that streamline measurement logging and decision making. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine digital caliper M240.071.N and to discuss delivery and configuration options via Metav Werkzeuge GmbH in Emmerich. Technical data Article number: M240.071.N GTIN: 4054469160368 Customs tariff number: 90173000 Facts Measuring range: 4–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.48 kg Jaw length: 45 mm Special features Material: hardened stainless steel, metal housing Display functions: ON/OFF, ZERO, UNIT, HOLD Power: 3 V Interface: RB 5 Delivery: protective transport case included Digital display FAQ Is this caliper suitable for measuring pipe wall thickness? The Metav IndustryLine digital caliper M240.071.N is designed specifically for wall‑thickness checks and is suitable for pipes and thin‑walled components within its 4–150 mm range. What is the display resolution and how is it shown? Resolution is 0.01 mm, shown on the digital display; the inch equivalent 0.0005 in is available when switching units on the instrument. Does the instrument include a protective case for transport? Yes, the caliper is delivered in a protective transport case to reduce the risk of damage during handling and transit. Can measurement data be exported to a computer or logger? The instrument provides an RB 5 data output interface for integration into documentation workflows where required. What power source does the caliper use and how long does it typically last? The caliper operates from a 3 V cell; battery life depends on usage and power‑saving behaviour of the display. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Inductive System 0.01mm Resolution IP67, Three-Point Measurement, Supplied Calibrated in Case - Metav IndustryLine
Take advantage of the combination of IP67 protection, 0.01 mm resolution and hardened stainless‑steel construction for reliable, repeatable workshop measurements; order the M216.185 digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper M216.185 (150 mm) — Inductive measuring system, IP67 A Digital Caliper M216.185 designed for precise external, internal, depth and step measurements in machine shops and quality control environments, compliant with DIN 862 IP67 protection for dust and water resistance High-resolution 0.01 mm readout, 0.0005 in display Inductive measuring system for robust operation Hardened stainless-steel construction for longevity Robust protection that keeps inspections working The combination of IP67 protection and stainless hardened steel construction ensures the instrument resists chip ingress and coolant splash, reducing downtime in busy workshop environments. This robustness is a practical benefit: measuring can continue at the machine or at the inspection bench without frequent cleaning or premature wear. The durable build maintains jaw geometry and alignment over time, which supports reproducible results and lowers the need for early replacement. Practical versatility for everyday measurement tasks Classified in the Standard measuring range (0–150 mm), the tool offers the best balance of reach and stiffness for general machining and metalwork tasks. With four measurement modes the instrument handles inside, outside, depth and step measurements, reducing the need for multiple gauges. The round depth rod (Ø 1.6 mm) and the proven jaw geometry deliver reliable contact for small recesses and stepped components, enabling efficient inspection of assemblies, fixtures and workpieces. Clear digital readout and dependable measuring principle A crisp digital display with mm/inch switching and MODE / 0 / ON‑OFF keys streamlines data capture and reduces interpretation errors on the shop floor. The caliper uses an inductive system, which is less vulnerable to surface contamination than optical encoders and supports stable readings in harsh conditions. The standard 0.01 mm resolution (0.0005 in) combines with simple zeroing functions and a locking screw to speed repetitive checks and to secure a measured value for transfer or documentation. Designed for consistent shop performance Weighing approximately 0.4 kg and conforming to DIN 862, this caliper is engineered for one‑hand handling while retaining sufficient mass for stable contact. The instrument suits routine quality control and machine‑shop inspection where a fine balance between reach and rigidity matters. Its features support a rational workflow: faster measurement cycles, fewer secondary tools and consistent output for production control or incoming inspection. Contact Metav Werkzeuge for tailored advice or to reserve the M216.185 digital caliper for the workshop—phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M216.185 GTIN: 4054469146362 Brand: Metav IndustryLine Standard: DIN 862 Measuring system: inductive Protection rating: IP 67 Facts Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.4 kg Round depth rod diameter: 1.6 mm Jaw lengths: 40/21 mm Tariff number: 90173000 Special features Digital display with MODE, mm/inch and 0/ON/OFF functions Four measurement functions: inside, outside, depth, step Locking screw for secure readings Hardened stainless-steel construction Compliant with DIN 862 FAQ Which measurement tasks does this caliper cover? The M216.185 digital caliper covers external, internal, depth and step measurements and is therefore suitable for general workshop inspection and fixture control. Is the caliper suitable for use at the machine? Yes; with an IP67 rating and an inductive measuring system, the caliper tolerates splash and contamination typically encountered beside machines. What accuracy and resolution can be expected? The instrument provides a resolution of 0.01 mm (0.0005 in) on the digital readout, matching common digital caliper standards for shop inspection. Does the caliper conform to any standards? The M216.185 is built to DIN 862 specifications for calipers, ensuring geometry and functional compatibility with workshop metrology practices. How is the measured value secured for transfer? A locking screw on the slider secures the jaw position so measurements can be recorded or transferred without drift. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Inductive System, 0.01mm Resolution, IP67, Three-Point Measurement, Data/Bluetooth, Supplied In Case - Metav IndustryLine
Take advantage of a robust IP67 rating, an inductive measuring system and reliable Bluetooth data transfer to speed up quality control without sacrificing accuracy; the combination supports consistent workshop workflows and straightforward data capture. Order directly via Metav Werkzeuge or consult our product specialists for procurement advice. Metav IndustryLine Digital caliper 150 mm (IP67) — Inductive system, Bluetooth The Digital caliper 150 mm (IP67) is a standard-range precision caliper designed for everyday machine‑shop and metalworking measurement tasks, combining sturdy construction with wireless data output for traceable results. IP67 dust and water protection Inductive measuring system Bluetooth data output for logging 0.01 mm resolution, mm/inch display Hardened stainless-steel construction Reliable workshop accuracy for standard measurement ranges Designed for the standard workshop band, this caliper matches the typical 100–300 mm range used across maintenance, fabrication and quality departments. The 0.01 mm display resolution delivers fine resolution for routine checks, while adherence to DIN 862 ensures the instrument meets recognised metrological expectations. The hardened stainless steel construction increases resistance to wear and keeps the measuring faces true under frequent use, which reduces rework and inspection time in production environments. Fast, traceable readings and simplified data handling Equipped with Bluetooth data output and an inductive encoder, the instrument provides stable digital readings and straightforward wireless transfer to tablets, laptops or data-collection systems. The display features MODE/mm/inch and 0/ON/OFF keys for rapid switching between units and modes, so measurement cycles are shorter and documentation is easier to maintain. This combination supports efficient inspection routines and improves traceability without additional adapters. Robust protection and practical transport solution The caliper’s IP67 rating safeguards the electronics against dust and temporary immersion, extending service intervals in harsher workshop environments. The inductive measuring system further minimises the effects of dirt on signal reliability. A locking screw secures the slide during handling and the instrument is supplied in a transport case to protect the tool during storage and transit, helping to avoid accidental damage and downtime. Four measurement functions and ergonomic handling With four measuring modes enabled, the caliper covers external, internal, depth and step measurements in a single instrument, reducing tool changes at the bench. The round depth rod (1.6 mm) and jaw geometry (40/21 mm) provide practical reach and access for small features, while the tool’s low mass (0.4 kg) and balanced design support comfortable one‑hand operation for repeated checks. Contact Metav Werkzeuge today for tailored procurement of Metav IndustryLine measuring instruments and advice on integrating Bluetooth data capture into existing quality processes. Technical Data Article number: M216.189 GTIN: 4054469146409 Manufacturer: Metav IndustryLine Norm: DIN 862 Facts Measurement range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.4 kg Round depth rod: 1.6 mm Special features IP67 protection Inductive measuring system Bluetooth data output Digital display with MODE/mm/inch and 0/ON/OFF keys Four measuring modes: external, internal, depth, step Hardened stainless-steel construction Locking screw for slide fixation Supplied in transport case FAQ What measurement accuracy can be expected from this caliper? The digital caliper offers a display resolution of 0.01 mm and complies with DIN 862; for a 150 mm instrument the typical permissible deviation aligns with the DIN-based expectations for digital calipers (commonly around ±0.03 mm for ranges up to 300 mm). Can the instrument record internal, external, depth and step measurements? Yes — the caliper supports four measuring modes (external, internal, depth and step), enabling versatile use across inspection tasks without instrument exchange. Is the Bluetooth output suitable for direct data logging? The Bluetooth data output allows wireless transfer of measured values to compatible data-collection systems and measurement software; the Metav IndustryLine digital caliper M216.189 is designed for streamlined electronic recording. Does the caliper resist workshop contaminants and moisture? The unit is rated IP67, protecting the electronics against dust ingress and temporary immersion, while the inductive measuring system improves tolerance to contaminants on the scale. What physical features aid everyday handling and transport? The instrument’s hardened stainless-steel build, locking screw for slide fixation, balanced weight (0.4 kg) and supplied transport case make it suitable for routine use and secure storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Inductive System, IP67, Data/Bluetooth, 0.01mm Resolution, Four-Point Measurement, Hardened Stainless Steel, Transport Case - Metav IndustryLine
Take advantage of the combination of robust workshop protection, precise 0.01 mm resolution and wireless data transfer for faster quality checks and fewer transcription errors — order the instrument directly via Metav Werkzeuge or ask the consultants for application advice and a datasheet. Digital caliper M216.186 — 150 mm, IP67, inductive system (Metav IndustryLine) The Digital caliper M216.186 is a 150 mm inductive digital caliper designed for standard workshop and quality‑control tasks, offering protected operation in harsh environments. IP67 protection for dust and water resistance Inductive measurement system with 0.01 mm resolution Bluetooth data output for logged measurements Hardened stainless‑steel construction, lock screw included Precision where traceability meets everyday use The Digital caliper M216.186 combines a 0.01 mm display resolution with an inductive measuring system, delivering stable readings that reduce the influence of surface contamination and minor wear. Classified in the Standard range (max. 150 mm), it balances reach and rigidity for typical machine‑shop tasks. Conformity with DIN 862 provides an objective basis for comparison in procurement and routine checks, while the clear resolution supports pass/fail decisions and statistical process control without unnecessary complication. Reliable data transfer to speed up documentation Equipped with Bluetooth data output and a display with MODE, mm/inch and 0/ON/OFF controls, this instrument simplifies measurement logging and eliminates manual entry errors. The inductive system ensures repeatable signals to the electronics, so transferred values match the displayed reading. For inspection routines and digital quality records, this results in measurable time savings and improved data integrity for traceable reports and audit trails. Built to withstand workshop conditions With an IP67 rating and hardened stainless‑steel construction, the caliper tolerates coolant‑sprays and dusty benches while resisting corrosion. A locking screw secures measuring jaws for repeated comparative checks and set‑ups, and the device’s design supports routine cleaning without compromising performance. The robust build offers confidence during daily use and reduces downtime associated with fragile measuring tools. Ergonomics and versatile measurement capability The instrument supports four measurement functions — external, internal, depth and step — enabling one tool to replace several gauges in the shop. A compact jaw geometry (40/21 mm) keeps access to narrow features straightforward, while the digital display switches easily between mm and inch (0.0005 in resolution) for mixed‑unit workflows. Lightweight handling and intuitive controls reduce operator fatigue and speed up inspection sequences, making the caliper a practical choice for both production and maintenance tasks. Contact Metav Werkzeuge for tailored application advice, supply options and to request a detailed specification or datasheet for the Metav IndustryLine digital caliper M216.186 Technical data SKU: M216.186 GTIN: 4054469146379 Standard: DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Weight: 0.4 kg Protection class: IP67 Jaw length: 40/21 mm Tariff number: 90173000 Special features Inductive measuring system Bluetooth data output Digital display with MODE / mm‑inch / 0/ON/OFF Hardened stainless‑steel construction Locking screw for reproducible readings Four measurement functions: external, internal, depth, step FAQ What measurement functions are available with this caliper? The caliper provides external, internal, depth and step measurements, enabling versatile use across inspection and assembly tasks. How is measurement data exported for documentation? Values are transmitted via Bluetooth from the caliper to compatible data‑logging systems, reducing manual transcription and speeding up documentation. Is the instrument suitable for wet or dusty workshop environments? Yes, the IP67 protection class and stainless‑steel construction allow operation in environments with dust and temporary immersion. Does the display support both metric and imperial units? The display switches between millimetres and inches (0.0005 in resolution) using the MODE key, supporting mixed‑unit workflows. Does the caliper meet recognised metrology standards? This measuring instrument is designed and specified to comply with DIN 862 for calipers, offering a recognised benchmark for workshop and quality control use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper IP67 With Auto Shutoff, INC/Zero/Hold Buttons, Stainless Hardened Steel, Four‑Function Measurement, Supplied In Case - Metav IndustryLine
Combine robust ingress protection, a 0.01 mm display resolution and a hardened stainless steel construction for dependable, repeatable measurements on the shop floor; the result is consistent component inspection and fewer reworks. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice and supply options. Digital Caliper 150 mm M216.161.D – IP67 protection, 0.01 mm resolution (Metav IndustryLine) The Digital Caliper 150 mm M216.161.D is a compact, workshop-grade measuring instrument designed for general machining and quality control tasks where resilience and clear readout are essential. IP67 protection against dust and water Hardened stainless steel construction 0.01 mm resolution, ±0.02 mm accuracy Four measuring functions: inner, outer, depth, step Built for wet and dusty workshop conditions The instrument’s IP67 rating ensures reliable operation even where coolant mist, swarf or dust are present; this reduces measurement interruptions and extends service life compared with non-sealed instruments. The frame is made from hardened stainless steel, which provides both corrosion resistance and structural stiffness to keep readings consistent under daily use. Delivered in a transport case, the caliper arrives protected for transit and on-site handling, supporting safe storage between jobs. Accuracy that supports production decisions With a display resolution of 0.01 mm and an accuracy of ±0.02 mm, this caliper meets the expectations of standard precision control in machining and metalworking. The specification follows DIN 862, giving a familiar benchmark for quality assurance. Practically, the resolution and tolerance mean the device is suitable for routine inspection of turned parts, milled components and assembly checks where rapid, verifiable measurements are required rather than sub‑micron laboratory work. Versatile measuring capability and ergonomic handling Equipped for four measuring functions — outer, inner, depth and step — the caliper replaces several single‑purpose gauges and streamlines workflow. The digital display includes tactile buttons (INC, MODE, HOLD and ON/OFF) for straightforward operation, and an automatic shut-off feature preserves the CR2032 battery during intermittent use. The instrument’s jaw length and profile suit common workshop tasks while remaining easy to manipulate for one‑handed measurements. Practical benefits for procurement and daily use Classified in the Standard size group (measurement range to 150 mm), the tool offers the best compromise between reach and rigidity for general workshop needs; typical applications include machine shops, maintenance departments and metal fabrication. The sealed electronics are advantageous where intermittent wetting occurs, and the hardened material minimises wear on contact surfaces for longer service intervals. The result is lower total cost of ownership through fewer replacements and less downtime. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine caliper into your inspection workflow or to arrange delivery from Emmerich: +49 2822 7131930, info@metav-werkzeuge.com Technical Data Article number: M216.161.D GTIN: 4054469182919 Brand: Metav IndustryLine Standard: DIN 862 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Weight: 0.4 kg Protection class: IP67 Battery: 3 V CR2032 Special features Material: hardened stainless steel Four measuring functions: outer, inner, depth, step Digital display with INC, MODE, HOLD and ON/OFF buttons Automatic shut-off Delivered in a transport case (plastic or wooden depending on logistics) FAQ What is the usable measurement range of the caliper? The Digital Caliper 150 mm M216.161.D provides a measurement range of 0–150 mm, placing it in the Standard category for workshop use. How precise is the instrument for routine checks? Resolution is 0.01 mm with an accuracy of ±0.02 mm, which is suitable for standard machining tolerances and quality control tasks. Can the caliper be used in damp or dirty environments? Yes, the device has an IP67 rating, meaning the electronics are sealed against dust and temporary immersion, making it robust for harsh workshop conditions. Which measuring tasks does this caliper perform? The caliper supports outer, inner, depth and step measurements, offering four measuring functions that cover most general inspection requirements. Is a calibration certificate supplied with the caliper? A calibration certificate is provided only if explicitly specified; standard factory settings apply unless a particular calibration option is requested at purchase. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Large LCD 17mm Digits, Large Display, mm/inch, Four‑Function Measurement, Stainless Hardened Steel, DIN 862 - Metav IndustryLine
Take advantage of the combination of clear 17 mm digit readout, 0.01 mm resolution and a hardened stainless-steel build for reliable, repeatable measurements in the workshop; the caliper ships in a protective case and is available through Metav Werkzeuge or via consultation with our sales team. Digital Caliper 150 mm M216.135 — Large 17 mm LCD, 0.01 mm resolution (Metav IndustryLine) A Digital Caliper 150 mm that provides rapid, unambiguous readings and fourfold measuring capability for general workshop and production use Large 17 mm LCD for clear readout 0.01 mm resolution, DIN 862 compliance Hardened stainless-steel construction Fourfold measurement: inside, outside, depth, step Faster decisions thanks to visibly clearer readouts A large-format LCD with 17 mm digits puts measurement values instantly within view, reducing interpretation time and the risk of transcription errors. With a standard 0.01 mm resolution on the metric scale and a corresponding inch readout, the instrument enables immediate logging of dimensions for quality control routines. The clear control layout – ON/OFF, ZERO and mm/inch – supports rapid switching between tasks and formats, so operators spend less time setting up and more time producing reliable results. Robust construction for consistent, long-term accuracy The slider and jaws are manufactured from hardened stainless steel, chosen for wear resistance and corrosion protection in busy workshop environments. This construction promotes dimensional stability across repeated use and helps preserve the calibrated state of the measuring faces. Delivered in a protective case for safe transport and storage, the caliper is designed to withstand shop-floor handling while keeping the measuring surfaces clean and intact to maintain accuracy. One tool, four measuring functions to simplify processes Equipped for fourfold measurement—outside, inside, depth and step—the digital instrument replaces several single-purpose gauges and reduces the number of tool changes during inspection. The rapid mm/inch conversion and tactile function buttons allow smooth workflow integration when components or drawings require mixed units. With a 150 mm measuring range, this model fits the standard workshop category, offering the best balance of reach and rigidity for everyday tasks such as component checks, fixture set-up and incoming inspection. Ready for industrial routine and straightforward integration Compliant with DIN 862, the caliper is suited for general machine-shop metrology and routine quality assurance. Weighing around 0.45 kg, the instrument is robust yet manageable for single-handed operation during repetitive inspection cycles. The combination of visible digits, dependable electronics and hardened measuring faces supports faster measurement throughput and fewer rereads, which together contribute to improved productivity across production and maintenance processes. Choose the Metav IndustryLine Digital Caliper for clear, repeatable measurements and contact Metav Werkzeuge for tailored advice or order coordination by phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M216.135 GTIN: 4054469110509 Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Display: Large LCD, 17 mm digit height Facts Weight: 0.45 kg Jaw length: 40 mm Power: 3 V battery Standard: DIN 862 Tariff number: 90173000 Special features Material: hardened stainless steel Measurement modes: outside, inside, depth, step Controls: ON/OFF, ZERO, mm/inch Delivery: protective case included Category: Standard workshop caliper FAQ What measuring range does this caliper cover? The caliper offers a measuring range of 0–150 mm suitable for standard workshop tasks and is supplied under the Metav IndustryLine designation M216.135. Can the instrument measure in inches as well as millimetres? Yes, the caliper features an mm/inch function allowing immediate conversion; the inch resolution is 0.0005 in. Is the caliper suitable for routine quality checks in production? The design, hardened stainless-steel measuring faces and DIN 862 compliance make this caliper well suited for everyday inspection and shop-floor quality control. Does the device include depth and step measurement capabilities? Yes, fourfold measurement is supported: outside, inside, depth and step measurements are all possible with this instrument. How is the caliper protected during transport? The instrument is delivered in a protective case to safeguard the jaws and electronics during storage and transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Left-Handed Stainless Steel ABS Function Data Output RB 5, Four-Point Measurement, Plastic Case - Metav IndustryLine
Take advantage of a left‑handed digital caliper that combines 0.01 mm resolution, an ABS absolute setting and hardened stainless construction for reliable shop measurements; order the instrument directly via Metav Werkzeuge or consult the Metav team for specification advice. Digital caliper 150 mm — left‑hand version, hardened stainless steel, ABS The Digital caliper 150 mm is a left‑hand configuration measuring tool for precise workshop and quality‑control tasks, designed for routine interior, exterior, depth and step measurements. Hardened stainless steel body for workshop use 0.01 mm resolution with mm/inch display ABS absolute function for retained zero position Four‑in‑one measurement capability Consistent precision for everyday workshop workflows The 150 mm instrument sits in the Standard measuring class (best suited to 100–300 mm ranges), offering a pragmatic balance of reach and rigidity for general engineering and metalworking tasks. With a 0.01 mm resolution on the digital display and the familiar mm/inch readout, the device supports typical production and inspection work where repeatable results are required. The mechanical design uses hardened stainless steel for corrosion resistance and long service life; this reduces wear on the jaws and keeps measurement reproducibility high across repeated cycles. Ergonomic left‑hand design and practical operation A left‑handed layout improves handling and sightlines for left‑hand operators without compromising functionality. The instrument includes ABS (absolute) functionality so the slider retains its reference zero after power‑off, and an easy ON/OFF, ZERO and mm/inch keypad for quick setup. Four measurement modes are available — outside, inside, depth and step — which covers the common measuring tasks on components, fixtures and assemblies. These operational features shorten setup time and make routine checks more efficient in a production environment. Data connectivity and process integration Equipped with RB 5 data output, the caliper can be integrated into data collection or SPC workflows where supported by compatible interfaces, improving traceability and reducing manual transcription errors. The instrument’s digital nature aligns with the standard expectations for workshop calipers — 0.01 mm display resolution and conventional accuracy ranges for digital instruments — and supports straightforward logging of measured values. This combination of digital readout, robust material and standardised output offers a cost‑effective route into more connected quality processes. Contact Metav Werkzeuge today to confirm compatibility with existing data systems or to request tailored advice for integrating this Metav IndustryLine caliper into your measurement routine Technical data Article number: M216.089.N GTIN: 4054469110356 Brand: Metav IndustryLine Data Measuring range: 0–150 mm Resolution/display step: 0.01 mm Jaw length: 40 mm Data output: RB 5 Special features Material: hardened stainless steel Measurement modes: outside, inside, depth, step (four‑in‑one) ABS absolute function (retained zero) Digital display with ON/OFF, ZERO and mm/inch keys Left‑hand version Category: caliper (digital) FAQ What measuring tasks is this caliper best suited for? The caliper is configured for general workshop and quality‑control tasks; the 150 mm range makes it ideal for standard machine‑shop parts, fixtures and small assemblies where the Standard class balance of reach and stiffness is required. Does the instrument support both metric and imperial units? Yes, the digital readout includes mm/inch switching so measurements can be taken or recorded in either system without recalculation. Can measured values be exported electronically? The caliper provides an RB 5 data output suitable for compatible data collection interfaces, enabling electronic transfer when paired with matching adapters or systems. Is the caliper suitable for harsh workshop environments? Constructed from hardened stainless steel, the unit resists corrosion and wear typical in production settings, delivering prolonged service life under normal workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Caliper Preset With Removable Roller, 3V, DIN 862, Supplied In Case, Four-Function Measurement - Metav IndustryLine
Benefit from consistent workshop measurement with the 150 mm digital caliper's quick Preset function and removable measuring roller; the hardened stainless steel construction and DIN 862 conformity deliver robust, repeatable results for everyday inspection. Order the caliper directly via Metav Werkzeuge or consult our technical team for application advice. Digital caliper M216.125.P — 150 mm, Preset, removable roller (Metav IndustryLine) The Digital caliper M216.125.P is a 150 mm precision caliper with a SET/PRESET button and a detachable drive roller, designed for standard workshop and quality‑control tasks 150 mm measuring range, DIN 862 compliant Preset function with SET/PRESET and ON/OFF control Removable measuring roller with drive piece included Stainless hardened steel with glass scale and metal electronics Accurate everyday inspection without compromise The instrument is classified as a standard‑range caliper (measuring range up to 300 mm), which offers the best balance between reach and rigidity for general mechanical and metalworking tasks. With a 150 mm scale it covers the universal workshop needs while maintaining the stiffness required for reproducible readings. The digital module features an ON/OFF switch and a SET/PRESET key to store a reference quickly, reducing repetitive adjustments during batch checks. The unit supports the four classic measuring modes — internal, external, depth and step — enabling a single tool to replace multiple gauges and streamlining inspection routines. Built for workshop durability and straightforward handling The frame and jaws are manufactured from stainless hardened steel, the scale runs on a glass guide and the electronics are housed in a robust metal casing to resist everyday wear and workshop conditions. The relatively low mass of approximately 0.4 kg keeps handling nimble while preserving stability when measuring. A detachable measuring roller is supplied as a drive piece, allowing measurements along contours or curved surfaces without compromising contact quality. The combination of hardened materials and a compact construction reduces wear, extends service life and keeps maintenance effort to a minimum. Digital convenience and integration for efficient quality control Equipped with a clear digital display and the preset facility, the caliper accelerates routine inspections and minimises transcription errors. Data output is provided via the RB 5 interface and the caliper runs from a 3 V power system, facilitating straightforward connectivity and long operating intervals. Conformity with DIN 862 places the instrument within recognised measurement practice for workshop and production use. For users familiar with digital caliper standards, the device supports typical workflows where fast, repeatable readings and simple data export are priorities, improving throughput and traceability in inspection processes. For reliable everyday precision, choose the Metav IndustryLine M216.125.P and contact Metav Werkzeuge in Emmerich for ordering or tailored technical guidance Technical data Article number: M216.125.P GTIN: 4054469167886 EClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–150 mm Weight: 0.4 kg Power supply: 3 V Jaws length: 40/21 mm Special features Digital display with ON/OFF and SET/PRESET button Four measurement modes: internal, external, depth, step Removable measuring roller; drive piece included Material: stainless hardened steel; scale with glass guide Electronics in metal housing Complies with DIN 862 Data output: RB 5 FAQ What measuring functions does this caliper offer? The Digital caliper M216.125.P supports four measuring modes — internal, external, depth and step — covering the typical inspection tasks found in workshop and quality control environments. Is the measuring roller included and what is it for? Yes, a removable measuring roller (drive piece) is supplied with the caliper; it enables smoother measurements across curved surfaces and helps when measuring along contours. Can measurement data be exported from this instrument? The caliper provides a data output via RB 5, allowing measured values to be transferred to compatible data loggers or inspection systems. Does the instrument meet recognised measurement standards? The instrument is designed and labelled in accordance with DIN 862, placing it within established workshop measurement practice. How does the preset function improve workflow? The SET/PRESET button permits storing a reference value quickly, reducing manual adjustments during repetitive checks and improving throughput and consistency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com