Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
150mm Digital Outside Caliper With Probing Pins, 0.01mm Resolution, 3V, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a compact, workshop-ready design that combines stainless, hardened construction, a 150 mm measuring range and a 0.01 mm display step for reliable production checks; order directly via Metav Werkzeuge or ask the consultants for application advice. Digital external caliper M240.061.N — 150 mm, measuring pins, stainless hardened The Digital external caliper M240.061.N is a 150 mm precision measuring instrument for accurate external and groove measurements in workshop and quality‑control environments. Precision 0.01 mm resolution Stainless hardened metal construction Integrated measuring pins for groove checks RB 5 data output and HOLD function Accurate, repeatable readings for reliable quality control The instrument delivers a clear 0.01 mm resolution over a 150 mm range, which supports consistent pass/fail decisions in serial production and incoming inspection. The digital readout reduces transcription errors compared with analogue scales and the compact design keeps thermal and handling effects low, improving repeatability for short‑span checks. This combination of fine resolution and factory‑level workmanship turns routine measurements into verifiable, comparable records for shop‑floor traceability. Robust construction for everyday workshop use Built from stainless steel that is hardened and fitted with a protective metal housing, the caliper is designed to withstand regular handling and machine‑shop conditions. A jaw length of 40 mm enhances access for measuring narrow grooves and external profiles while the overall mass supports steady contact pressure. The durable finish resists corrosion and maintains smooth slide action, reducing maintenance intervals and downtime in busy production environments. Digital functions that speed documentation and reduce errors The digital display is equipped with ON/OFF, ZERO, UNIT and HOLD keys to streamline measurement routines and allow quick switching between millimetres and inches (resolution in inches: 0.0005 in). Data is available through the RB 5 output, enabling straightforward capture into SPC systems or data loggers and reducing manual entry. These features translate into time savings and improved documentation quality in inspection reports and production logs. Standard‑class versatility tailored to workshop demands Classified as a Standard caliper (100–300 mm range), this instrument balances reach and stiffness for typical machine‑tool and assembly tasks. The included measuring pins extend the device's usability to external groove checks and recessed features where standard jaws would be limited. Supplied to factory standard (Werksnorm), the tool is ready for routine inspection work and integrates easily into established quality procedures without special handling or calibration requirements. Contact Metav Werkzeuge for technical consultation on the M240.061.N and to arrange fast dispatch from Emmerich for production‑grade measuring tools Technical data Article number: M240.061.N GTIN: 4054469160344 Eclass: 21170344 Data output: RB 5 Display functions: ON/OFF, ZERO, UNIT, HOLD Numbers / Core technical data Measuring range: 0–150 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Weight: 0.4 kg Jaw length: 40 mm Power: 3 V Special features / Versions Material: stainless steel, hardened, with metal housing Measuring pins included for groove/external checks Factory standard (Werksnorm) delivery Digital readout with unit selection and hold function RB 5 compatible data output FAQ What is the display resolution and expected accuracy of the caliper? The caliper shows 0.01 mm resolution; for the 0–150 mm range the typical digital error band follows standard practice and is in the order of ±0.03 mm for normal workshop use. Is the device suitable for groove and recessed measurements? Yes, the instrument includes measuring pins, which extend the reach of the jaws and facilitate external groove and recessed feature checks. Does the caliper provide a data interface for recording measurements? Measurements can be output via RB 5, enabling connection to compatible data loggers or SPC capture systems for automated documentation. What type of power supply does the caliper require? The measuring system operates from a 3 V supply (typical button‑cell voltage rating); the display and electronics use this nominal voltage. Is the caliper delivered calibrated to an accredited standard? The tool is supplied to the manufacturer's factory standard (Werksnorm). It is not specified as ISO 17025 calibrated with an accompanying accredited certificate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Pocket Caliper Three-Point, 0.01mm Resolution, RS232C Output, Supplied in Case - Metav IndustryLine
Compact, robust and ready for integration: the caliper combines 0.01 mm resolution, a hardened stainless steel construction and an RS232C data interface for reliable shop-floor measurement and simple data logging. Order the digital pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital pocket caliper »Digital‑Taschen‑Messschieber, schwarz« — pocket caliper with RS232 data output A Digital pocket caliper, black, designed for portable precision measuring across workshop and inspection tasks, combining compact format with a clear display and data connectivity. Compact pocket format for mobile measuring 0.01 mm resolution for standard workshop control RS232C output for data logging and traceability Delivered in a transport box for safe storage Precision and portability for routine measurement tasks The compact digital caliper is built to bring reliable, repeatable results to everyday workshop measurement. With a resolution of 0.01 mm and a clear display with 12 mm digit height, read‑outs are quick and unambiguous — reducing reading errors during repetitive checks. The caliper’s hardened stainless steel jaws and beam resist wear and provide mechanical stability; this material choice supports long term dimensional stability and helps maintain calibration intervals. The lightweight design (approx. 0.3 kg) and pocket format make the tool suitable for mobile inspections where access and handling matter. Seamless documentation and integration for quality processes Equipped with an RS232C (RB2) data output, the instrument enables direct transfer of measurement values to data collection systems or inspection software. This connectivity supports quality processes that require traceable records or statistical process control, reducing manual transcription and associated errors. The display features mm/inch toggle and dedicated zero and on/off controls, streamlining measurement workflows and allowing swift switching between unit systems without extra calculation. Versatile measuring functions for common workshop needs This pocket caliper performs four fundamental measurement modes — external, internal, depth and step measurements — so it covers the typical checks required in metalworking and assembly. The combination of a compact jaw geometry and hardened contact surfaces allows access to small features while retaining repeatability. For routine parts inspection and quick setup checks, the instrument provides a practical balance of reach and manoeuvrability. Practical protection and workshop readiness The device is supplied in a transport box for protection during storage and transit, helping prevent knocks and contamination that could affect accuracy. The robust surfaces and compact form factor reduce susceptibility to damage when carried in pockets or toolkits, and the easy‑to-read digits speed up inspection cycles. Where traceability is required, data logging via RS232C simplifies the creation of measurement records without additional adapters. For tailored advice and immediate availability, contact Metav Werkzeuge in Emmerich — Metav’s specialists can confirm stock, compatibility with inspection systems and ordering options for this Metav IndustryLine caliper (SKU M216.086) — call +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data SKU: M216.086 GTIN: 4061905082559 Manufacturer: Metav IndustryLine Facts Resolution: 0.01 mm Display digit height: 12 mm Weight: 0.3 kg Data output: RS232C (RB2) Special features Material: hardened stainless steel Measuring modes: external, internal, depth, step (4‑way measurement) Display functions: on/off, zero, mm/inch Delivery: transport box (plastic or wooden box) FAQ How accurate is the measurement from this digital pocket caliper? The caliper offers a resolution of 0.01 mm, suitable for standard workshop control and routine inspection tasks; accuracy depends on application and handling. Can measurement values be exported directly to a computer? Yes — the unit has an RS232C (RB2) data output for direct transfer of readings to compatible data collection systems. Which measurement types are supported by this caliper? The instrument supports four measurement types: external, internal, depth and step measurements, making it versatile for general workshop use. Is the caliper protected for transport? The caliper is supplied in a transport box to protect the instrument during storage and transit. What material are the jaws and beam made from? The caliper is manufactured from hardened stainless steel, chosen for wear resistance and stability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper 0.01mm Resolution, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability and a clear digital display to speed routine inspections while keeping measurement uncertainty low; the combination of a 0–150 mm measuring range, USB data output and IP54 protection ensures reliable part checking across the shop floor. Order directly via Metav Werkzeuge or contact the consultants for integration advice. Messschieber — Digital caliper, 0–150 mm range with USB and ISO 17025 The Messschieber is a digital caliper for exterior measurements, designed for standard workshop and machine‑shop use where quick readout, data transfer and traceable calibration are required. Digital display, 9 mm height Measuring range 0–150 mm Resolution 0.01 mm, accuracy ±0.03 mm USB data output and IP54 protection Reliable, traceable precision for everyday quality control This caliper delivers consistent measurement results thanks to a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, attributes that suit routine quality checks and incoming inspection. The instrument is supplied fully calibrated to ISO 17025, and the delivery includes the traceable calibration certificate, which supports internal audit trails and supplier chains. By using this standard‑range tool (0–150 mm), inspection tasks common in machine and metal workshops are covered with a balance of reach and stiffness that reduces handling errors. Robust construction and data-ready connectivity for production use Designed for frequent use in an industrial context, the caliper features IP54 protection against dust and splashing water and a 9 mm high digital display for fast reading even under workshop lighting. The built‑in USB data output enables straightforward transfer of measured values into spreadsheets or inspection software, reducing transcription errors and saving time in documentation. A 25 mm jaw length provides stable contacting for external measurements, contributing to repeatability when checking shafts, housings or machined faces. Practical handling that integrates into inspection routines Ergonomic operation and the pronounced display speed up measurement cycles and reduce operator fatigue; the instrument’s compact footprint and single‑hand operation make it suited to bench work and mobile measuring stations. Integration into digital documentation workflows is simplified by the USB interface, allowing measured values to be logged directly and used for statistical process control. For workshops seeking to standardise measurement procedures, the caliper’s combination of readable display, data output and certified calibration offers measurable improvements in efficiency and traceability. Contact Metav Werkzeuge for tailored advice on integrating this ISO 17025 calibrated Microtech Metrology digital caliper into inspection processes, or request the calibration certificate and data‑transfer options via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 141430150 GTIN: 4061905459375 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Digital display height: 9 mm Jaw length: 25 mm Special features Data output: USB Protection class: IP54 Delivery: Calibrated to ISO 17025 with certificate Digital instrument for exterior measurements FAQ What measuring range does this caliper cover? The measuring range is 0–150 mm, making the digital caliper suitable for standard machine‑shop and metalworking tasks. Is the instrument supplied calibrated? Yes, the Microtech Metrology digital caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate. How are measured values transferred to a PC? Measured values are exported via the integrated USB connection for direct logging into inspection software or spreadsheets. What protection against dust and moisture does the device have? The caliper is rated IP54, offering protection against dust ingress and splashing water, suitable for workshop environments. What accuracy and resolution can be expected in daily use? The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, appropriate for standard quality control applications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper Absolute ABS System Removable Thumb Roller, 0.01mm Resolution, 4‑Function, DIN 862 - Metav IndustryLine
Take advantage of a compact, 150 mm absolute measuring system with 0.01 mm resolution and a removable thumb roller for efficient one‑hand operation; the hardened stainless steel construction with a glass scale ensures stable readings across routine shop work. Order the digital caliper directly via Metav Werkzeuge or consult the specialists for specification matching. Digital caliper M216.235.N — 150 mm ABS system, removable thumb roller (Metav IndustryLine) The Digital caliper M216.235.N is a 150 mm absolute digital caliper designed for production and workshop measurement tasks, combining robust materials with a practical thumb roller for fast positioning. Absolute measuring system ABS, 150 mm range 0.01 mm resolution with ORIGIN/UNIT/ON/OFF/0/ABS Removable 3 V thumb roller for easy handling Hardened stainless steel with glass scale Reliable metrology for everyday quality control The caliper uses an absolute measuring system powered by a 3 V cell, providing stable zero reference and repeatable readings without the need for re‑zeroing after power loss. With a resolution of 0.01 mm (0.0005 in) and conformity to DIN 862, the instrument fits the requirements of standard workshop and machine‑shop inspection tasks; measured values are clear and comparable, which supports process documentation and reduces rework in the production chain. Designed to speed up routine tasks A removable thumb roller and compact weight (0.35 kg) make this gauge well suited to repetitive measurements and single‑hand operation on the shop floor. The digital display includes ORIGIN, UNIT, ON/OFF and 0/ABS controls for flexible handling of measurement modes, while the RB 5 data output enables transfer to data collectors or inspection software where applicable, improving traceability and saving time in logging values. Robust construction for consistent results Built from hardened stainless steel with a glass scale, the caliper resists wear and maintains scale integrity during daily use; this material choice also supports stable sliding action and low thermal distortion. The jaw geometry (40/21 mm) balances reach and stiffness, so critical measurements remain reproducible across the full 150 mm range even under workshop conditions. Versatility across measurement types This gauge supports the four classic caliper functions — inside, outside, depth and step measurements — so it replaces multiple single‑purpose tools in routine inspection. The absolute system and clear numeric display make measurement interpretation straightforward for operators with mixed experience levels, reducing uncertainty in assembly and maintenance tasks. Choose the Metav IndustryLine digital caliper for dependable shop measurement and contact Metav Werkzeuge for application advice or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M216.235.N GTIN: 4054469159355 Label: Digital caliper, 150 mm, ABS system, removable 3 V thumb roller Norm: DIN 862 Data Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.35 kg Tariff number: 90173000 eCl@ss: 21170344 Special features Material: hardened stainless steel, scale with glass slide Measuring system: absolute measuring system, 3 V Digital display: ORIGIN, UNIT, ON/OFF and 0/ABS buttons Measurement capabilities: inside, outside, depth and step Data output: RB 5 Removable thumb roller for assisted feed Supplied in a plastic or wooden case for transport FAQ What measurement accuracy can be expected with this caliper? The M216.235.N delivers a resolution of 0.01 mm; as a DIN 862 conforming digital caliper it meets the standard accuracy expectations for workshop and production use. Does the instrument support data transfer to inspection systems? Yes, the caliper is equipped with an RB 5 data output to allow measurement values to be exported to compatible data collection devices. Which measurement types are possible with this instrument? The device performs inside, outside, depth and step measurements, offering the four standard caliper functions required in general inspection tasks. Is the caliper suitable for continuous shop‑floor use? Constructed from hardened stainless steel with a glass scale and featuring a removable thumb roller for ergonomic handling, the gauge is engineered for regular workshop operation. How is the caliper supplied for transport and storage? The caliper is supplied in a plastic or wooden case to protect the instrument during transport; the case is intended for transit rather than long‑term workshop storage. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper Extra Thin Jaws 0.01mm Resolution Four‑Function Measurement, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of high-resolution measurement, a slim jaw geometry for delicate features and reliable RB 5 data output for process integration; these attributes support efficient quality control and reproducible results. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital Precision Caliper 150 mm (extra-thin jaw) — Metav IndustryLine, 0.01 mm resolution The Digital Precision Caliper 150 mm is a compact, workshop-grade measuring instrument for precise external, internal, depth and step measurements in metalworking and general engineering. 0.01 mm resolution with 0.03 mm accuracy Extra-thin 40 mm jaws for fine features Stainless hardened steel construction RB 5 data output for process integration Precision where repeatability counts The caliper offers 0.01 mm resolution with a stated accuracy of 0.03 mm, providing a reliable balance between fine measurement and robustness required on the shop floor. The instrument’s measuring range classifies it as a standard caliper (0–150 mm), which is the preferred length for everyday tasks in machining and metal fabrication because it combines reach with good stiffness. The slender 40 mm jaws make it straightforward to measure narrow grooves and small radii without compromising the sliding stability that underpins repeatable results. Workflows simplified by digital features A clear digital display with ON/OFF, ZERO, UNIT and HOLD keys reduces handling time and measurement errors when switching between metric and imperial units (display inch resolution 0.0005 in). The caliper is equipped with RB 5 data output, enabling direct connection to logging systems or SPC equipment for rapid documentation and process control. The electronic readout and simple control layout support faster inspection loops, which translates into fewer interruptions and higher throughput during batch checks. Versatile measuring functions for diverse applications This digital caliper supports 4-way measurement: external, internal, depth and step — a single tool that replaces multiple gauge types for many routine checks. Constructed from hardened stainless steel with a metal housing, the instrument withstands workshop conditions while retaining measurement stability. The slim-jaw geometry is particularly suited to fine mechanical work, such as small components and assemblies, where accessibility and minimal interference are essential. Built for everyday use and transport Weighing approximately 0.4 kg, the caliper is light enough for handheld use yet substantial enough to avoid unwanted flex during careful measurement. Delivered in a protective case for transport, the tool remains secure between jobs and during transit. The factory-standard build and finishing reflect Metav IndustryLine’s emphasis on reliable supply: products are filtered and distributed from Emmerich to support consistency across workshops and small series production. Contact Metav Werkzeuge today to discuss application suitability and integration with existing inspection workflows — Metav’s specialists will advise on data connectivity and measurement strategy Technical data SKU: M240.014.N GTIN: 4054469160283 Category: Messschieber / Precision calipers Facts Measuring range: 0–150 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Accuracy: 0.03 mm Weight: 0.4 kg Jaw length: 40 mm Power: 3 V battery Data output: RB 5 eClass: 21170344 Special features Digital display with ON/OFF, ZERO, UNIT and HOLD functions Hardened stainless steel construction with metal housing Extra-thin jaw geometry for fine-feature access Four-way measurement: external, internal, depth, step Delivered in protective case for transport Factory standard specification (Werksnorm) FAQ What is the smallest increment the display shows? The display provides a resolution of 0.01 mm (0.0005 in), enabling fine readings suitable for standard workshop inspection. Is the caliper suitable for internal and depth measurements? Yes, the instrument supports internal, external, depth and step measurements (four-way measurement) for versatile inspection tasks. How is measurement data exported? This caliper is fitted with an RB 5 data output for wired data transfer to recording devices or SPC systems. What material and finish does the caliper have? The caliper is made from hardened stainless steel with a metal housing, combining corrosion resistance with mechanical stability. Is the tool supplied ready for transport? The caliper is supplied in a protective case for secure transport between job sites and for storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper Fibreglass Body 0.01mm Resolution, With On/Off, Zero And Mm/Inch Functionality - Metav IndustryLine
Benefit from a lightweight fibreglass construction and a clear digital display with 0.01 mm resolution for dependable workshop measurements; the compact 150 mm range combines reach and stiffness for everyday machine‑shop tasks. Order directly via Metav Werkzeuge or consult our technical team for specialist advice. M216.070 Digital Caliper — 150 mm Fibreglass, 0.01 mm resolution The M216.070 Digital Caliper is a 150 mm fibreglass-bodied digital caliper designed for routine measurement and quality control tasks in workshops and light industrial settings. Lightweight fibreglass body, corrosion resistant Digital display with 0.01 mm resolution Integrated mm/inch and zero functions 150 mm measuring range, workshop standard Reliable accuracy for routine workshop control The fibreglass frame delivers a rigid yet lightweight measuring instrument that reduces the risk of corrosion and keeps operator fatigue to a minimum. The combination of a 150 mm measuring range and a 0.01 mm display step offers a pragmatic balance between reach and resolution, making the caliper suitable for standard inspection tasks in metalworking and general engineering. This ensures consistent, repeatable readings without over‑specifying for common workshop requirements. Clear digital operation reduces handling errors The instrument features a straightforward digital display with ON/OFF, ZERO and mm/inch switching, simplifying cross‑unit comparisons and data logging. The electronic readout minimises parallax and interpretation errors associated with analogue scales, improving throughput in routine checks. The compact jaw geometry and intuitive controls speed up frequent measurements while maintaining the precision expected in production environments. Built for dependable everyday use Constructed from fibreglass with a low mass of approximately 0.1 kg, this caliper is easy to handle and transport between workstations. The material choice contributes to resistance against workshop humidity and reduces thermal mass, which can be beneficial when measuring parts that are not thermally stable. As a standard 150 mm class instrument, it fulfils the typical needs of maintenance, quality control and machining setups where a balance of stiffness, reach and operability is required. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine digital caliper into your inspection workflow and to confirm the best accessory options for production demands Technical Data Article number: M216.070 GTIN: 4054469110219 ECLASS: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm Weight: 0.1 kg Jaw length: 40 mm Special features Construction: Fibreglass body Type: Digital caliper Display functions: ON/OFF, ZERO, mm/inch Category: Caliper / Messschieber FAQ What is the measuring range and resolution of this caliper? The caliper offers a measuring range of 0–150 mm with a resolution of 0.01 mm, matching typical workshop accuracy requirements for inspection and layout work using the M216.070 Digital Caliper. What material is the caliper made from and why does it matter? The body is made of fibreglass, which keeps the instrument lightweight and provides good resistance to corrosion and thermal mass, making the M216.070 well suited to everyday workshop use. Can the display switch between millimetres and inches? Yes — the integrated digital display supports mm/inch conversion and includes ON/OFF and ZERO functions for straightforward unit switching and relative measurement. Is this caliper appropriate for machine‑shop quality control? As a 150 mm class digital caliper, it is designed for standard machine‑shop and workshop quality checks where a combination of reach, stiffness and 0.01 mm readout is required. What identifiers should be used when ordering or referencing this caliper? Reference SKU M216.070 and GTIN 4054469110219 when enquiring or ordering to ensure the correct digital caliper model is supplied. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper Flat Measuring Faces Swiss Digit Display IP67, Wireless - Microtech Metrology
Benefit from reliable workshop measurement with wireless data transfer, IP67 protection and a precise 0–150 mm measuring range for consistent quality control. Order directly via Metav Werkzeuge or consult our specialists for integration into existing inspection routines. Digital caliper — Microtech Metrology, wireless data and IP67 sealing A digital caliper designed for workshop and quality-control tasks, offering a 0–150 mm measuring range with robust sealing and industry-ready data transfer. Wireless data transfer for Industry 4.0 workflows IP67 protection for wet and dusty environments Swiss Digit display, 11 mm high numerals 0.01 mm resolution for precise readings Accurate results for everyday quality control The instrument delivers reproducible measurements across the common workshop span of up to 150 mm, classifying it as a standard caliper ideal for general engineering and metalwork. With a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, the unit supports routine dimensional checks where traceable repeatability matters. The clearly legible Swiss Digit display (11 mm height) reduces reading errors on the shop floor, while the compact jaw geometry keeps the measuring faces rigid for better stability during one-handed use. Seamless capture of measurement data into production systems Equipped with a wireless data output, this device simplifies integration with data-collection systems and inspection software, cutting manual transcription errors and saving time during batch checks. The combination of wireless communication and digital readout turns individual measurements into instantly reusable data points for SPC or production logs. For workshops moving towards Industry 4.0, the caliper provides a pragmatic step: familiar handheld operation combined with modern connectivity to accelerate reporting and corrective action. Built for harsh workshop conditions Designed for daily use, the instrument features IP67 sealing, which protects electronics against dust ingress and temporary immersion. This level of protection extends the service life when measuring in coolant-prone or outdoor environments and reduces downtime due to moisture-related faults. The jaws, supplied in two useful lengths (40/60 mm), permit secure clamping and versatile access to internal and external geometries. Together, robustness and practical jaw design make this caliper a dependable tool for production, maintenance and incoming inspection. Practical advantages that matter to the buyer By covering the universal measurement range most workshops need, the tool eliminates the constant swapping of instruments, delivering both reach and stiffness in a single device. The wireless data link and crisp numeric display support faster throughput and clearer decision-making at control stations. When data integrity and traceability are required, these features reduce process risk and enable a smoother quality workflow. For precise, connected measurement from a trusted brand, contact Metav Werkzeuge for ordering details and application advice — Metav’s team can advise on integrating the Microtech Metrology digital caliper into existing inspection processes. Technical data SKU: 141840154 GTIN: 4061905457333 Brand: Microtech Metrology Category: Calipers Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display type: Swiss Digit, 11 mm height Protection class: IP67 Special features Wireless data output Digital instrument Jaw lengths: 40/60 mm Suitable for workshop and quality-control environments FAQ What measurement range does this caliper cover? The digital caliper covers a measuring range of 0–150 mm, corresponding to a standard workshop caliper suitable for general mechanical and metalworking tasks. How precise are the readings from the Microtech Metrology caliper? Readings are given with a resolution of 0.01 mm and an accuracy of ±0.03 mm, making the instrument appropriate for routine quality control and dimensional checks. Is the caliper protected against coolant and dust? Yes. The instrument features IP67 protection, offering resistance to dust ingress and temporary immersion, which is advantageous in wet or dirty workshop conditions. Can measurement data be exported directly to inspection software? The unit supports wireless data transfer, enabling direct capture of measurements into compatible data-collection or SPC systems for immediate processing. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper For Pipe Wall Thickness 75mm Jaw Length, Metal Housing, Plastic Case - Metav IndustryLine
Data inconsistency detected: the product specification contains conflicting values for the jaw length. The product title and label reference both "75 mm" and "60 mm" for the jaw (schnabellänge), while the dedicated jaw-length field records 75 mm. Because these entries contradict one another, a reliable, standards-compliant product description cannot be produced from the current data set. Please confirm the correct jaw length (60 mm or 75 mm) and verify any related dimensional entries so the specification is consistent. If clarification is required, Metav Werkzeuge can be contacted for confirmation at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Once the dimensions are corrected, a full British English product description that meets all editorial, technical and formatting requirements will be prepared.
150mm Digital Precision Caliper For Pipe Wall Thickness Measurement Swiss Digit Display IP67 ISO 17025 - Microtech Metrology
Take advantage of the combination of certified accuracy, robust protection and easy readability for reliable workshop and inspection routines; the tool arrives fully calibrated to ISO 17025 standards and is ideal for standard workshop measurement tasks. Order via Metav Werkzeuge or contact the technical team for application advice. Digital Caliper (0–150 mm) — Microtech Metrology, IP67, ISO 17025 calibrated Digital Caliper (0–150 mm) offers a compact, workshop-ready measuring solution for general machine and metalworking tasks, with a high-contrast display and sealed electronics for use in demanding environments IP67 dust- and water-resistant ISO 17025 calibration certificate included Swiss Digit display with 11 mm digits Hand-finished jaws for repeatable contact Certified accuracy that supports quality decisions The Digital caliper is delivered with a full ISO 17025 calibration certificate, providing a verifiable measurement basis for inspection reports and incoming quality control. With a resolution of 0.01 mm and an stated accuracy of ±0.03 mm, the instrument gives a clear efficiency advantage when standard tolerances must be checked quickly; fewer re-measurements mean shorter cycle times and more consistent pass/fail decisions on the shop floor. Built to withstand workshop conditions and fluids Sealed to IP67, the instrument resists dust and temporary immersion, making it suitable for production environments exposed to coolant or fine particulate. The measuring system is self-lubricating, reducing downtime for maintenance, while the hand-finished jaws ensure stable contact geometry and repeatable positioning—benefits that translate into reliable part-to-part comparability and fewer measurement-related disruptions during series work. Easy reading and practical measuring geometry for everyday tasks A large Swiss Digit display with 11 mm high digits improves legibility under workshop lighting and speeds up routine checks, reducing operator time per measurement. The jaw geometry includes a 46 mm beak length and a 4 mm measuring cone diameter for accessing narrower features and internal profiles without compromising stability. The clear readout and compact frame together support fast decisions at the bench and minimise transcription errors in quality records. Designed for universal workshop use and traceable documentation With a measuring range of 0–150 mm, this tool fits the "Standard" category commonly used across machine and metalworking shops, offering the best compromise of reach, stiffness and single-handed operation for everyday tasks. Supplied fully calibrated to ISO 17025, it simplifies audit trails and complies with documented measurement systems; selection of this instrument supports consistent processes and dependable results in routine inspection and assembly workflows. Contact Metav Werkzeuge today for a tailored supply of Microtech Metrology digital calipers, including the ISO 17025 certificate and delivery options from Emmerich; technical consultation is available if specification adaptation is required Technical data SKU: 141230153 GTIN: 4061905037351 Eclass: 21170344 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display type: Swiss Digit, 11 mm Protection rating: IP67 Special features Digital instrument ISO 17025 calibration certificate included Hand-finished measuring jaws Self-lubricating mechanism Measuring cone diameter: 4 mm Beak/jaw length: 46 mm FAQ Is the instrument supplied with a calibration certificate? Yes. The Microtech Metrology digital caliper is supplied fully calibrated with an ISO 17025 calibration certificate and can be used for traceable inspection documentation. What accuracy and resolution can be expected in routine checks? The device offers a resolution of 0.01 mm and an overall accuracy of ±0.03 mm, suitable for standard workshop quality control within the 0–150 mm measuring range (SKU 141230153). Can the caliper be used in wet or dusty workshop environments? The instrument has an IP67 rating, which protects the electronics from dust ingress and temporary immersion, making it robust enough for many production-floor conditions. Are the measuring jaws suitable for repeatable contact on machined parts? Yes. The tool features hand-finished jaws designed for consistent contact geometry and repeatable placement, reducing variability between measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper Horizontal Mount Small Housing Stainless Steel DIN 862 - Metav IndustryLine
Take advantage of a compact 150 mm digital inset caliper that combines hardened stainless-steel construction with a 0.01 mm display resolution and DIN 862 conformity for dependable workshop measurement; order the instrument directly via Metav Werkzeuge or consult our technical advisors for integration support. M218.154.N Digital inset caliper — 150 mm, stainless hardened (Metav IndustryLine) The M218.154.N is a compact 150 mm digital inset caliper for horizontal installation, designed for standard workshop and production measurement tasks under the DIN 862 norm. Compact 150 mm measuring range Digital display 0.01 mm resolution Hardened stainless-steel construction DIN 862 conformity, small housing Precise measurement where repeatability matters The inset caliper delivers a clear 0.01 mm readout with an indicated accuracy of ±0.03 mm, which supports routine quality controls and machining checks with measurable reproducibility. The electronic display is equipped with ON/OFF, ZERO, UNIT and HOLD functions to speed up tasks and reduce transcription errors; the unit also provides inch readings at 0.0005 in resolution for mixed-measurement workflows. These characteristics make the instrument a practical choice for environments that prioritise reliable numeric data and traceable measurement steps. Space-saving design that keeps installation simple Built with a small housing and intended for horizontal mounting, this caliper fits into constrained mounting positions without sacrificing measuring face stiffness. With a 150 mm measuring range the tool sits in the Standard category of calipers (max. range 100–300 mm), which is the workshop default for a balance of reach, rigidity and one-handed handling. The compact format is particularly suitable for machine-tool fixtures, jigs and small-batch inspection stations where space and repeatability are equally important. Robust materials and straightforward operation Constructed from hardened stainless steel, the device resists wear and corrosion in demanding shop-floor conditions while maintaining jaw geometry for consistent readings. Power is supplied by a 3 V cell for long service life and simple replacement. For data capture and process documentation the unit includes a RB 5 data output interface, allowing digital transfer of measured values into external systems or data loggers. The solid material choice and electronic readout reduce the need for repeated manual rechecks, improving throughput in serial inspection tasks. How this caliper supports production workflows As a digital inset caliper engineered to DIN 862, it bridges bench measurement and inline control: faster readings, less interpretation, and direct digital logging where required. The combination of a hardened slide, compact housing and clear display translates into fewer measurement-related stoppages and smoother quality routines. For buyers seeking a pragmatic instrument that integrates into standard metrology procedures, this format reduces the friction between workshop reality and formal inspection criteria. For precise workshop measurement and easy integration, contact Metav Werkzeuge for technical advice or purchasing information — Metav IndustryLine instruments are distributed from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for further assistance. Technical data Article number: M218.154.N GTIN: 4054469160740 ECLASS: 21170344 Type: Digital inset caliper Weight: 0.3 kg Measuring range: 0–150 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Material: hardened stainless steel Norm: DIN 862 Power: 3 V measuring system Display: ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Digital: yes FAQ What resolution does the caliper provide? The caliper shows 0.01 mm resolution on the digital display (0.0005 in) for detailed dimensional checks. What accuracy can be expected during measurement? The device specifies an accuracy of ±0.03 mm, suitable for standard workshop quality control and machining tolerances. Is the instrument suitable for machine-shop use? Yes — with its 150 mm range and hardened stainless-steel construction the caliper is in the Standard class, designed for everyday use in machine and metalworking environments. Which data interface is available for digital logging? The caliper features an RB 5 data output to facilitate transfer of readings to external recording devices. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Digital Precision Caliper LCD Colour Display, IP67, Rechargeable Lithium Battery, Depth Rod, Locking Screw, 0.01mm Resolution - Filetta
The robust combination of IP67 protection, a rechargeable lithium battery and a clear LCD colour display delivers reliable workshop performance and low downtime; the compact 0–150 mm measuring range with ±0.02 mm accuracy ensures precise routine checks. Order the instrument directly via Metav Werkzeuge or consult their specialists for application advice. Caliper MS910.471 – Digital caliper with IP67 protection and LCD colour display The Caliper MS910.471 is a workshop-ready digital measuring instrument designed for protected, day-to-day length and depth measurements in mechanical and metalworking environments IP67 dust- and waterproof protection LCD colour display with day/night mode Rechargeable lithium battery included Measuring range 0–150 mm, ±0.02 mm accuracy Built for workshop precision and durability This instrument sits in the standard caliper class (measuring range 0–150 mm), which balances reach and stiffness for general engineering tasks. The housing and slider are sealed to IP67, protecting electronics from dust and water ingress and reducing the risk of downtime in harsh workshop conditions. With a specified accuracy of ±0.02 mm, the tool meets the expectations of routine quality control and production checks; the stated resolution of 0.01 mm on the readout supports reproducible measurements and straightforward pass/fail decisions. Clear readings and dependable measurement control A LCD colour display with day/night modes and a built-in tolerance function simplifies inspection workflows by showing clear visual results even under bright lights or in dim areas. The electronic readout supports mm/inch switching, ABS/INC modes and a reset function for flexible measurement procedures. Mechanical helpers such as the locking screw and the drive wheel ensure steady, repeatable traversing of the slide, while the depth gauge and the jaw length 40 mm extend the instrument’s usefulness to recess and step measurements without additional tools. Practical power and handling for everyday use Power is supplied by a rechargeable lithium battery, reducing disposable battery waste and avoiding unexpected interruptions during shifts. The caliper’s robust construction and inclusion of a transport case make it suitable for regular on-site use and safe storage between jobs. The combination of sealed electronics, rechargeable power and the readable display shortens inspection cycles and lowers per-measurement effort, helping workshops maintain throughput and consistent quality with minimal operator retraining. Where this instrument adds value in the workflow Designed for mechanical workshops, maintenance departments and small-scale production, the caliper accelerates routine checks, setup tasks and incoming inspections by combining protected electronics with practical measuring features. Its compact design and sealed slider reduce long-term service needs, while the tolerance and unit-switching functions support faster decision making on the shop floor. Metav’s sourcing and logistics ensure the instrument is available with consistent quality control and reliable delivery across Europe. Contact Metav Werkzeuge for an application consultation on the Filetta Caliper MS910.471 and arrange a supply solution that fits the workshop’s inspection routine Technical Data Article number: MS910.471 Brand: Filetta Product type: Digital caliper Protection class: IP67 Display: LCD colour display with day/night mode and tolerance function Measuring range: 0–150 mm Accuracy: ±0.02 mm Resolution: 0.01 mm Jaw length: 40 mm Power supply: Rechargeable lithium battery Depth gauge: yes Locking screw: yes Drive wheel: yes Case included: yes Reading modes: mm/inch, ABS/INC, reset Facts Measuring range (min–max): 0–150 mm Display resolution: 0.01 mm Specified accuracy: 0.02 mm Special features Sealed construction for workshop protection Tolerance function for pass/fail indication Day/night display modes for varied lighting Rechargeable power source to reduce disposables Depth measurement capability Locking screw for repeatable readings Drive wheel for smooth sliding action Supplied in protective case for transport and storage FAQ What environments is this caliper suited for? The Filetta Caliper MS910.471 is designed for workshop and industrial settings where occasional exposure to dust and moisture occurs; its IP67 rating makes it suitable for protected use on the shop floor. Does the instrument provide metric and imperial readings? Yes, the digital readout offers both mm/inch switching and ABS/INC modes so the caliper can be used in mixed-unit environments without manual conversion. Is a calibration certificate supplied with the caliper? This listing does not state an ISO 17025 calibration certificate. The caliper is delivered ready for use; for traceable calibration options please consult Metav Werkzeuge. How is the caliper powered and what are the advantages? The instrument uses a rechargeable lithium battery, which reduces the need for disposable cells and keeps inspection cycles uninterrupted by ensuring reliable power between charges. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Precision Caliper Long Internal Jaws, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable calibration, robust ingress protection and fine resolution to speed up quality checks and reduce rework; delivered fully calibrated to ISO 17025 with certificate. Order this measuring instrument directly via Metav Werkzeuge or consult our specialists for application advice. Microtech digital caliper — 0–150 mm, IP67, ISO 17025 The digital caliper is a standard-range measuring instrument for workshop and quality-control tasks, designed for fast external and internal measurements with clear digital readout. IP67 protection for wet environments ISO 17025 calibrated with certificate 0.01 mm resolution, ±0.03 mm accuracy Precise, repeatable measurements for everyday quality control This instrument covers the 0–150 mm standard range, offering the best balance between reach and rigidity for routine machine-shop work. With a 0.01 mm display step and an industrial accuracy of ±0.03 mm, inspection cycles become more efficient while maintaining clear tolerance control. The compact frame is classed as a standard-range caliper, which suits common task flows in production and inspection benches; the measurable benefit is fewer rejected parts and faster decision-making at the control stage. Use of a digital readout reduces transcription errors compared with analogue scales and speeds up logging in quality records. Robust design and certified traceability for compliant workflows Built to withstand workshop conditions, the unit features IP67 protection, keeping ingress of dust and short-term immersion from affecting operation. Crucially, the tool is supplied fully calibrated to ISO 17025 and includes a calibration certificate, enabling immediate use in traceable measurement routines and integration into quality-management systems. This certified delivery removes uncertainty about measurement provenance and supports audit requirements, ensuring both suppliers and customers can rely on documented results. Readability and handling that aid reliable internal and external measuring A tall, clear digital display (11 mm) enhances legibility on the shop floor, reducing operator fatigue during repeated checks. The measuring jaws extend approximately 40 / 41.5 mm, providing confident internal measurement reach for bores and recesses without compromising stiffness for external checks. The instrument’s digital electronics enable fast readings and straightforward transfer into inspection logs; for automated data capture the available interfaces should be discussed with Metav specialists to match the measurement workflow. Ergonomic handling and a robust slide reduce the influence of operator technique, supporting consistent measurement outcomes. For traceable precision, request a calibrated quote from Metav Werkzeuge — Metav’s Emmerich-based specialists will advise on the Microtech digital caliper (SKU 141130153) and delivery options. Technical Data Article number: 141130153 GTIN: 4061905452383 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Jaw length: 40 / 41.5 mm Protection rating: IP67 Special features Digital instrument Delivered fully calibrated (ISO 17025) Standard-range caliper classification (100–300 mm) Long measuring jaws suitable for internal measurements FAQ Is the caliper delivered ready for precision work? Yes. The Microtech digital caliper (SKU 141130153) is supplied fully calibrated to ISO 17025 and includes the calibration certificate for immediate use in traceable inspection tasks. What measurement accuracy and resolution does the instrument provide? The caliper offers a display resolution of 0.01 mm and an industrial accuracy of ±0.03 mm, suitable for standard workshop quality control. Can the caliper be used in damp or contaminated environments? With its IP67 rating, the instrument is protected against dust ingress and temporary immersion, making it suitable for many demanding shop-floor conditions. Is the instrument suitable for internal measurements such as bores and recesses? Yes. The measuring jaws extend approximately 40 / 41.5 mm, which improves access for internal measurements while maintaining the stiffness needed for reliable external checks. Which measurement range classification does this caliper fall into? The device is a standard-range caliper (100–300 mm category) with a measuring range of 0–150 mm, offering a practical compromise between reach and handling for general machine‑shop use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper Small Inside Jaws Swiss Digit Display 11mm, IP67 - Microtech Metrology
Take advantage of precise 0–150 mm measurement with 0.001 mm resolution and IP67 sealing for reliable shop-floor performance; the dual measuring force (8 N external / 4 N internal) ensures repeatable results. Order the digital caliper directly via Metav Werkzeuge or consult our advisors for specification support. Microtech Metrology Digital Caliper — 150 mm range, 0.001 mm resolution The Microtech Metrology digital caliper is a robust workshop instrument for accurate external and internal measurement up to 150 mm, combining a clear Swiss Digit display with sealed construction for industrial use. 0.001 mm resolution display IP67 splash and dust proof Dual measuring force 8N/4N Swiss Digit display 11 mm Precise readouts that support confident decisions High-resolution measurement reduces uncertainty in pass/fail decisions and setup routines. The caliper provides a 0.001 mm resolution via a clear Swiss Digit display (11 mm high), enabling fine discrimination where standard displays fall short. With a stated accuracy of ±0.015 mm, the instrument is suitable for quality control tasks where tighter tolerances are monitored and documented. The combination of fine resolution and verified accuracy allows straightforward integration into inspection protocols and records. Built to perform in the production environment Designed for everyday use in machine shops and inspection benches, this instrument belongs to the Standard class (measurement range up to 300 mm), offering an optimal compromise between reach and stiffness at the 150 mm length. The IP67 rating means the sliding system is sealed against dust and protected from temporary immersion, which helps maintain measurement integrity under workshop conditions. Robust sealing reduces maintenance intervals and supports stable performance across shifts. Stable contact pressure for repeatable measurements Operator-induced variation is a common source of scatter in comparative checks. This caliper features dual measuring force—8 N for external jaws and 4 N for internal jaws—so contact pressure is controlled for the two common measurement types. Consistent force improves reproducibility on mating parts and reduces rework from inconsistent readings, turning manual checks into reliable checkpoints for production control. Practical handling and inspection workflow benefits The device combines ergonomic handling with inspection-grade functionality: a compact sliding carriage for smooth motion, a high-contrast Swiss Digit display for fast reading, and measurement ranges of 0–150 mm (external) and 3–150 mm (internal) to cover typical workshop tasks. The digital format accelerates measurement cycles and reduces transcription errors compared with analogue scales, supporting a more efficient inspection routine without complex integration steps. Choose the Microtech Metrology digital caliper for IP67-rated accuracy and consistent measuring force, and contact Metav Werkzeuge in Emmerich for tailored technical advice and reliable delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141830156 GTIN: 4061905452284 Manufacturer: Microtech Metrology Facts Measurement range (external): 0–150 mm Measurement range (internal): 3–150 mm Resolution: 0.001 mm Accuracy: ±0.015 mm Display: Swiss Digit, 11 mm high Measuring force: 8 N external / 4 N internal Protection class: IP67 Special features Digital caliper, 150 mm range Sealed for dust and water resistance High-contrast Swiss Digit display Dual measuring force for repeatability FAQ What measurement ranges does this caliper cover? The caliper measures externally from 0–150 mm and internally from 3–150 mm; the SKU is 141830156. What resolution and accuracy can be expected? Resolution is 0.001 mm with an accuracy of ±0.015 mm, providing fine readouts for inspection tasks. Is the instrument suitable for use on the shop floor? Yes — the IP67 sealing protects the caliper against dust and temporary immersion, making it suitable for workshop environments. What display is fitted to the caliper? A Swiss Digit display with 11 mm-high digits is fitted, improving visibility during rapid checks. How does the measuring force affect results? The dual measuring force (8 N external, 4 N internal) on the Microtech Metrology digital caliper (SKU 141830156) stabilises contact pressure and improves repeatability for both external and internal measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper Swiss Digit Display 0.01mm Resolution, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of IP67 protection, 0.01 mm resolution and delivery with an ISO 17025 calibration certificate for dependable workshop measurements; order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper — Microtech Metrology with IP67 protection and ISO 17025 calibration The Digital Caliper is a Standard-range precision measuring instrument designed for workshop and quality-control tasks, featuring a clear Swiss Digit 11 mm display and a measuring range of 0–150 mm. Swiss Digit display 11 mm high Resolution 0.01 mm for fine readings IP67 protection against dust and water Delivered calibrated to ISO 17025 Reliable precision for everyday inspection needs Equipped with a Swiss Digit 11 mm display and a resolution of 0.01 mm, this caliper delivers readable results that speed up routine inspections and minimise transcription errors. The instrument is classified in the Standard range, covering 0–150 mm, which represents the typical workshop balance between reach and stiffness for tasks in machining and general metalwork. Readout clarity and fine resolution support consistent quality-control decisions without requiring specialist interpretation. Robust design for repeatable measurements in the workshop Built for demanding environments, the caliper's IP67 ingress protection ensures reliable operation at the machine bench or in dusty production areas; occasional splashes will not interrupt measurement sequences. The device features dual measuring force (8 N external and 4 N internal), which helps maintain consistent contact pressure for external and internal dimensions and reduces operator-induced variation. Together, these properties increase measurement repeatability and protect investment by extending service intervals. Traceable calibration and audit-ready documentation Supplied with an ISO 17025 calibration certificate, the instrument supports traceability requirements for quality systems and audit procedures. The calibration certificate documents the verification performed and provides confidence for acceptance in supplier control, incoming inspection and in-house calibration schedules. Integration into existing quality documentation is straightforward, and the clear numeric display facilitates fast recording of results during inspections. For traceable, workshop-ready precision request the ISO 17025-calibrated Microtech Metrology digital caliper (SKU 141430156) from Metav Werkzeuge — our Emmerich-based consultants will advise on optimal calibration intervals and suitability for specific measurement tasks. Technical data SKU: 141430156 GTIN: 4061905459450 Manufacturer: Microtech Metrology Digital display: Swiss Digit, height 11 mm IP rating: IP 67 Calibration: ISO 17025 certificate included Facts Measuring range: 0–150 mm Resolution: 0.01 mm Measuring force external: 8 N Measuring force internal: 4 N Special features Standard range caliper suitable for machining and metalwork Robust housing and sealed electronics for harsh environments Clear, high-contrast digital readout for rapid readings Delivered with traceable calibration certificate FAQ What is the measuring range and classification of this caliper? The caliper covers 0–150 mm and is classified in the Standard range, offering a practical balance of reach and stiffness for general workshop and machine-shop measurements. Is the instrument delivered calibrated and suitable for audits? Yes, the digital caliper from Microtech Metrology is supplied with an ISO 17025 calibration certificate, making it suitable for supplier control and internal audits. How resistant is the caliper to shop-floor conditions? The device has an IP67 rating, protecting electronics from dust ingress and temporary immersion, which supports use at the machine bench or in harsher workshop environments. What sort of resolution and readout can be expected? Readings are shown on a Swiss Digit 11 mm display with a resolution of 0.01 mm, providing clear and repeatable numeric results for standard quality-control tasks. Does the caliper help reduce operator influence on measurements? The caliper features a dual measuring force setup (8 N external, 4 N internal) that promotes consistent contact pressure, which improves repeatability and reduces measurement scatter related to manual handling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper Swiss Digit Readout, IP67, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 calibration, IP67 protection and a clear Swiss Digit display delivers traceable, workshop-ready measurements for everyday quality control. Order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Precision Caliper — IP67, ISO 17025‑calibrated 0–150 mm by Microtech Metrology The Digital Precision Caliper is a compact, workshop-grade measuring instrument for standard 0–150 mm tasks, suited to machine shops and quality control stations. IP67 dust- and water-resistant ISO 17025 calibrated with certificate Swiss Digit display, 11 mm digit height 0–150 mm measurement range Traceable accuracy for dependable production control A fully documented calibration to ISO 17025 ensures that measured values are traceable and auditable, which is essential for production control and incoming inspection. The instrument offers ±0.03 mm accuracy and a 0.01 mm resolution, matching typical industrial tolerance chains for standard caliper tasks. Classified in the standard workshop range, the caliper balances reach and stiffness for frequent use at 150 mm, reducing rework and increasing the reliability of pass/fail decisions in serial production. Robust design for demanding workshop environments Designed for everyday shop use, the caliper features an IP67 rating that protects against dust ingress and short-term immersion, allowing measurements at dirty machine benches or near coolant. The Swiss Digit display with 11 mm high digits improves readability under workshop lighting, speeding up inspections and reducing entry errors. The offset jaw geometry with 110/40 mm jaw lengths supports stable external and internal measurements on small assemblies while maintaining comfortable handling. Practical operation that speeds inspection routines Operation is straightforward: the digital readout and tactile slider save time during repetitive checks, while the instrument’s form factor supports one-handed use. The resolution and accuracy combination is suitable for quality assurance in metalworking, toolmaking and fixture inspection. Delivered with a traceable calibration certificate, this instrument integrates easily into documented quality systems and reduces administrative effort when proving measurement capability during audits. For guaranteed traceability and workshop durability, contact Metav Werkzeuge in Emmerich for personalised advice and ISO 17025‑calibrated measuring instruments — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141740153 GTIN: 4061905457395 Brand: Microtech Metrology eClass: 21170344 Facts Measurement range: 0–150 mm Resolution: 0.01 mm Accuracy: 0.03 mm Display height: 11 mm Jaw length: 110 / 40 mm Protection class: IP 67 Special features Digital caliper with Swiss Digit display Delivered fully calibrated to ISO 17025 with certificate Compact, standard workshop range Suited for machine shop and quality control use FAQ What level of accuracy can be expected from this caliper? The caliper from Microtech Metrology provides an accuracy of ±0.03 mm with a resolution of 0.01 mm, suitable for standard workshop measurements and quality checks (SKU 141740153). Is the instrument ready to use for calibrated inspections? Yes — the instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate for immediate use in documented inspection routines. Can the caliper be used at a machine bench or in damp conditions? With IP67 protection, the caliper tolerates dusty environments and temporary immersion, making it appropriate for workshop floors and near-coolant areas. How readable is the display in workshop lighting? The Swiss Digit display has 11 mm high characters for clear visibility under typical workshop illumination, reducing reading errors during rapid inspection cycles. Which industries and tasks is the caliper best suited for? This digital caliper is ideal for machine shops, toolrooms and quality departments requiring reliable 0–150 mm checks, incoming inspection and routine production control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper Swiss Digital 11mm Display, IP67, Self‑Lubricating - Microtech Metrology
The combination of IP67 protection, a 0–150 mm measuring range and an accuracy of ±0.03 mm makes this caliper a dependable choice for routine inspection and workshop metrology; order the instrument directly via Metav Werkzeuge or contact our consultants for advice. Microtech Metrology Digital Caliper 141430153 — 0–150 mm, IP67 The Digital Caliper 141430153 is a robust, workshop‑grade measuring instrument offering IP67 protection and a clear Swiss digital readout for fast, repeatable measurements in production and inspection environments. Swiss digital display, 11 mm height IP67 dust and water resistant 0–150 mm measuring range Self‑lubricating slide for smooth use Reliable shop‑grade capability for everyday measurement Designed for the universal workshop range, this instrument covers 0–150 mm, which places it in the standard class for machine and metalworking tasks. The IP67 rating protects the electronics from dust and temporary immersion, reducing downtime caused by contaminated components. The robust construction and readable display support fast measurement cycles on the shop floor, so inspection throughput and process reliability can be improved without complex integration. Precision suitable for quality control and inspection The instrument provides a resolution of 0.01 mm and an accuracy of ±0.03 mm, values that align with common industrial verification needs for parts and assemblies. The Swiss digital display with 11 mm digits ensures measurements are legible at a glance, helping to avoid transcription errors during checks. Stating resolution and accuracy in clear terms allows straightforward assessment against tolerance stacks and SPC requirements, so measurement results integrate easily into existing quality routines. Built for durability and straightforward handling A self‑lubricating slide reduces friction and wear, preserving measurement consistency over extended use. The 25 mm jaw length improves grip on workpiece edges and short profiles, while the sealed electronics minimise the risk of failure in harsher environments. Together these features reduce maintenance intervals and support a predictable service life, which benefits procurement decisions seeking a low‑effort, long‑lasting measuring solution. Practical benefits for procurement and workshop managers As a digital alternative to mechanical calipers, the instrument combines quick readouts with shop resilience. The readable Swiss display, compact footprint and robust sealing make it suitable for assembly, maintenance and incoming inspection tasks, where repeatable readings and minimal handling effort are priorities. Clear specifications enable easier comparison during sourcing and support the rational appeal of efficiency and measurable performance. Contact Metav Werkzeuge for a technical match and reliable supply from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss the Microtech Metrology digital caliper and its suitability for existing inspection workflows. Technical Data Article number: 141430153 GTIN: 4061905037771 Manufacturer: Microtech Metrology Core Specifications Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display digit height: 11 mm Jaw length: 25 mm Protection rating: IP67 Features and Versions Swiss digital display Self‑lubricating slide Digital device, battery powered (display module) Standard class caliper for machine and metalworking FAQ What measurement range does this caliper cover? The caliper covers 0–150 mm, which is the standard workshop range suitable for most machine‑shop and inspection tasks; the Microtech Metrology Digital Caliper 141430153 matches this requirement. How precise is the instrument for quality control tasks? Resolution is 0.01 mm with an overall stated accuracy of ±0.03 mm, making the instrument appropriate for general quality checks and production tolerances in metalworking. Is the caliper protected against coolant and dust? Yes, the device has an IP67 rating, protecting the electronics against dust ingress and temporary immersion, which increases reliability in harsher shop environments. Does the slide require frequent maintenance? The slide is self‑lubricating, which reduces routine maintenance and supports consistent motion and repeatable readings during extended use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper Wireless Display IP67, ISO 17025 Calibrated - Microtech Metrology
The combination of ISO 17025 traceable calibration, IP67 protection and wireless data output ensures reliable, repeatable measurements in workshop quality control. Benefit from 0.01 mm resolution and ±0.03 mm accuracy for consistent inspection results. Order the Microtech Metrology precision digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Precision Digital Caliper — ISO 17025, IP67, Wireless The Precision Digital Caliper is a 150 mm, workshop-grade measuring instrument for machining, inspection and quality-control tasks, offering robust protection and digital data transfer. ISO 17025-calibrated with certificate IP67 dust and water protection Wireless data output for integration 0.01 mm resolution, ±0.03 mm accuracy Traceable accuracy for production and inspection Calibration according to ISO 17025 is supplied with a formal calibration certificate, making this instrument suitable for traceable quality assurance and audit processes. The tool provides 0.01 mm resolution on a clear Swiss Digit display (11 mm height) and an industrial-grade ±0.03 mm accuracy, offering measurable improvements in reproducibility compared with standard workshop gauges. For procurement and inspection planning, this combination of certified calibration and documented measurement uncertainty supports compliance and reduces the need for repeat checks. Built for workshop use and repeatable handling Classified as a standard caliper with a measuring range of 0–150 mm, the instrument balances reach and stiffness for general machining and metalwork. The IP67 rating protects the electronics from dust and temporary immersion, keeping the display and electronics operational in demanding environments. The measuring jaws (25 mm jaw length) and the absence of a defined measuring force minimise operator-induced variation, allowing repeatable external and internal measurements in everyday production settings. Seamless digital capture for quality data workflows Equipped with wireless data output, the caliper simplifies data logging and integration into inspection software or spreadsheets, accelerating transfer from bench to database and reducing transcription errors. The large Swiss Digit display improves readability at the point of measurement, while the digital interface preserves the native 0.01 mm increments for downstream analysis. These features make the instrument a pragmatic choice where efficient data capture and traceability are priorities. Practical benefits for workshop metrology and serviceability The instrument is tailored to the needs of machine shops and quality departments seeking a reliable, high‑resolution measuring tool without complex setup. The compact 150 mm format keeps handling straightforward for single-handed measurement, while the supplied ISO 17025 certificate demonstrates that each unit meets a documented standard of accuracy on delivery. For purchasers who prioritise consistent results and a low barrier to digital integration, this caliper presents a cost-effective route to improved inspection routines. Contact Metav Werkzeuge for technical advice or to request the Microtech Metrology precision digital caliper with ISO 17025 certificate — Metav Werkzeuge provides local stock and expert guidance from Emmerich to support your quality processes Technical data Article number: 141430154 GTIN: 4061905459467 Manufacturer: Microtech Metrology Facts Measurement range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Jaw length: 25 mm Special features ISO 17025 calibration with certificate IP67 protection class Wireless data output Swiss Digit digital display Digital operation (electronic) FAQ Is this caliper delivered with a calibration certificate? Yes. The Microtech Metrology precision digital caliper is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate. What accuracy and resolution can be expected from the instrument? The instrument provides 0.01 mm resolution and an accuracy of ±0.03 mm, suitable for standard workshop inspection and quality control. Can the caliper be used in dusty or wet workshop conditions? Yes. The caliper is rated IP67, offering protection against dust ingress and temporary immersion, which helps maintain measurement reliability in harsh environments. How does the wireless data output work for integration into a quality system? The wireless data output transmits measured values for capture by compatible data loggers or inspection software, streamlining transfer and reducing manual recording errors. What measuring range category does this caliper belong to? With a measuring range of 0–150 mm, the instrument falls into the standard class, providing an optimal balance of reach, stiffness and ease of handling for general machine‑shop work. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Cross Tips, 0.01mm Resolution, Depth Rod Ø1.5mm, Inductive, ISO 13385 - Helios Preisser
Take advantage of precise workshop measurement with an inductive measuring system and a clear LCD readout, combined with robust stainless steel construction for dependable daily use. Order the pocket digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Pocket digital caliper DIGI‑MET with cross tips — Inductive system and clear LCD, Helios Preisser DIGI‑MET with cross tips is a compact pocket digital caliper designed for fast, repeatable measurements in workshops and inspection benches Inductive measuring system High-resolution readout 0.01 mm Stainless steel construction Depth probe round Ø 1.5 mm Accurate measurement that keeps production moving The compact digital caliper delivers reliable accuracy with a resolution of 0.01 mm and a stated tolerance of ±0.03 mm, making it suitable for routine quality checks and setup tasks. The inductive system reduces contact wear and provides stable readings even under demanding workshop conditions. As a result, measurement cycles are shorter and decisions on part acceptance or rework are supported by consistent numeric data rather than estimates. Clear display and straightforward handling for everyday use A tall LCD display (11 mm) with intuitive functions such as ON/OFF, mm/inch conversion, PRESET and key lock simplifies reading and reduces time spent interpreting results. The instrument includes a locking screw for secure measurement retention and cross tips to assist with interior and exterior checks. The absence of a data output port means the caliper is optimised for rapid manual checks rather than automated logging, which suits many bench and field applications where quick verification is the priority. Built for workshop durability and versatile measurement Constructed from stainless steel, the caliper tolerates routine handling and maintains calibration stability. The integrated depth probe (round Ø 1.5 mm) extends usability to narrow or recessed features, while the compact form factor supports transport in tool kits. Conformity with ISO 13385 underlines the manufacturing standard and helps procurement decisions that require traceable tool quality. The device supports four measurement modes, enabling interior, exterior, depth and step measurements with a single instrument. For precise, robust workshop measurement rely on the Helios Preisser DIGI‑MET pocket digital caliper — contact Metav Werkzeuge in Emmerich for tailored advice or to secure stock from our European quality hub. Technical data Article number: 1320416 GTIN: 4029713018962 Manufacturer: Helios Preisser Product name: Pocket digital caliper DIGI‑MET with cross tips Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm LCD height: 11 mm Jaw length: 40 mm Data output: none Measurement system: inductive 4‑way measurement: yes Special features Material: stainless steel Depth gauge: round Ø 1.5 mm Cross tips for internal and external measurements Locking screw included LCD functions: ON/OFF, mm/inch, PRESET, key lock Standard: ISO 13385 FAQ What measurement range and resolution does the DIGI‑MET offer? The Helios Preisser pocket digital caliper DIGI‑MET (SKU 1320416) covers 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm. Is the caliper suitable for depth measurements in narrow bores? Yes, the DIGI‑MET includes a round depth probe Ø 1.5 mm, enabling depth checks in narrow or recessed features. Can measurement data be transferred to a PC or data logger? The instrument is supplied without a data output port (data output: none), so readings are intended for direct manual recording rather than automated transfer. How does the inductive measuring system benefit workshop use? The inductive system reduces wear on the measuring carriage and provides stable, repeatable readings under normal workshop conditions; this supports efficient quality control on the shop floor. Which standard does the caliper conform to and what does that mean? The tool meets ISO 13385, indicating it is manufactured to defined quality and dimensional tolerances, which assists with procurement and inspection traceability. Helios Preisser — Contact via Metav Werkzeuge: Emmerich am Rhein, Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930
150mm Digital Precision Caliper With Depth Rod, 0.01mm Display, ABS/INC, Battery CR2032, Supplied In Case - Filetta
Reliable readings and smooth handling result from the digital mm/inch display, a 0–150 mm measuring range and ±0.03 mm accuracy—ideal for routine workshop quality checks. Order or request advice via Metav Werkzeuge for prompt, reliable supply. MS910.468 – Filetta digital caliper, 0–150 mm, ±0.03 mm accuracy MS910.468 is a compact digital caliper designed for workshop and inspection tasks where practical reach and dependable repeatability are required. Digital mm/inch display with reset function High accuracy ±0.03 mm Measuring range 0–150 mm Depth gauge and locking screw included Dependable precision for everyday quality control The caliper delivers ±0.03 mm accuracy with a display resolution of 0.01 mm, giving a solid balance between usability and measurement confidence for general engineering and metalwork. The 150 mm span places the instrument in the standard size class, which is widely used in machine shops because it offers an effective compromise of reach, rigidity and single‑hand operation. This combination supports repeatable checks on components, fixtures and assemblies without overcomplicating the workflow. Quick readings and flexible units to speed inspection A clear digital display shows measurements in mm/inch and includes ABS/INC, on/off and reset functions for straightforward operation and quick zeroing at any jaw position. The present control layout reduces calculation steps during a series of checks and minimises transcription errors when logging results, so inspection throughput increases while the risk of misinterpretation is lowered. Controlled handling and finer adjustment for delicate work Fine adjustment is provided via a thumbwheel, allowing measured, small moves to be made with minimal disturbance to the workpiece. A locking screw secures the jaws once the value is taken, ensuring the reading remains stable during transfer or recording. These mechanical aids reduce operator influence on the result and make the instrument easier to use in constrained or repetitive tasks. Practical features for the busy workshop The caliper includes an integrated depth gauge for blind bores and step measurements, extending the instrument’s usefulness beyond simple inside and outside measurements. The instrument is battery powered by a single CR2032, which is a commonly available cell and simplifies field replacement. Built for routine use, the design keeps operation intuitive while the core hardware supports reliable, day‑to‑day measurement routines. For personalised ordering and delivery options for the Filetta MS910.468 digital caliper, or to discuss suitability for specific applications, please contact Metav Werkzeuge for expert advice and reliable supply from Emmerich. Technical Data Article number: MS910.468 Manufacturer: Filetta Product type: Digital caliper Display functions: mm/inch, on/off, ABS/INC, reset Power supply: 1x CR2032 SKU: MS910.468 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 40 mm Special features Thumbwheel for fine adjustment Locking screw for fixed readings Depth gauge for bore and step measurement Digital readout for fast unit switching FAQ How accurate is the instrument for routine inspection? The Filetta MS910.468 provides an accuracy of ±0.03 mm with a display resolution of 0.01 mm, suitable for standard workshop quality control tasks. Can the caliper measure depth and steps as well as external dimensions? Yes, the instrument includes an integrated depth gauge and can perform inside, outside, step and depth measurements with stable readings. What makes this caliper suitable for daily workshop use? A combination of the mm/inch digital display, the thumbwheel for fine adjustments and the locking screw gives practical speed, controlled handling and repeatable results for everyday checks. Which battery does the caliper require? The unit uses a single CR2032 cell; this type is widely available and simple to replace when required. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Precision Caliper With Depth Rod, 0.01mm Resolution, CR2032 Battery, Supplied In Case - Filetta
The combination of a precise 0–150 mm measurement range, a 0.01 mm digital readout and a locking screw provides reliable, workshop-grade results with rapid repeatability; order the caliper directly via Metav Werkzeuge or consult our advisers for application support. Filetta MS910.464 Digital Caliper — 0–150 mm range, 0.01 mm resolution The Filetta MS910.464 digital caliper is a compact, workshop-oriented measuring instrument for general metalworking and inspection tasks, featuring an mm/inch digital display and an integrated depth gauge. Digital mm/inch display, 0.01 mm resolution Depth gauge and 40 mm jaw length Locking screw and thumb roller adjustment Supplied in a transport plastic case Precise readings that support process control The instrument delivers a 0–150 mm measuring range with a display resolution of 0.01 mm and an stated accuracy of ±0.03 mm, making it a standard caliper suited to everyday machining and inspection. The numerical specifications translate into practical benefits: reliably repeatable linear measurements across typical workshop parts, sufficient fineness for quality checks and component fitting, and a readable digital interface that shortens measurement cycles. The solid numerical basis supports faster decision-making on the shop floor and reduces rework. Designed for efficient handling and fine adjustment A dedicated thumb roller (drive wheel) enables controlled traversing of the jaws while the locking screw secures the setting for transfer or marking tasks; the instrument therefore combines delicate adjustment with robust fixation. The integrated depth gauge extends functionality beyond external and internal caliper jaws, allowing straightforward depth and step measurements without changing tools. These features together improve throughput by reducing tool changes and stabilising measurement force, which limits user-induced variation. Practical supply and battery convenience The caliper operates from a single CR2032 cell, offering long shelf life and simple replacement. The digital display includes mm/inch switching, an On/Off button and a Reset function for zeroing, which simplifies setup for batch checks and differing measurement conventions. Delivery includes a protective plastic case for transport, securing the instrument during storage or on-site transfers and lowering the risk of accidental damage between uses. Applications, suitability and maintenance Classified as a standard length instrument (best-in-class for 100–300 mm ranges), this caliper is intended for routine use in machine shops, maintenance departments and technical inspection. Basic upkeep consists of keeping the scale clean and dry and replacing the battery as needed; the locking screw should be used to avoid accidental impacts. The unit is appropriate where a balance of reach, stiffness and one-handed operability is required, such as component assembly, fixture checks and incoming goods inspection. For procurement assistance or specification advice on the Filetta MS910.464, contact Metav Werkzeuge in Emmerich by phone or email to discuss suitability for specific production tasks and delivery options. Technical Data SKU: MS910.464 Brand: Filetta Category: Digital caliper Facts Measuring range: 0–150 mm Resolution (reading): 0.01 mm Accuracy: ±0.03 mm Jaw length: 40 mm Battery: 1× CR2032 Special features Digital display with mm/inch, On/Off and Reset Locking screw for secured measurements Depth gauge for step and depth measurement Thumb roller (drive wheel) for fine adjustment Supplied in a transport plastic case Classified as a standard caliper (100–300 mm) FAQ What is the measuring range and resolution of this caliper? The Filetta MS910.464 measures from 0 to 150 mm with a digital resolution of 0.01 mm, suitable for standard workshop and inspection tasks. How accurate are measurements with this instrument? The specified accuracy is ±0.03 mm, which aligns the caliper with typical workshop-quality requirements for metalworking and inspection. Which measurement functions are supported? External, internal and depth measurements are possible; the display supports mm/inch switching and zeroing for comparative checks with the Filetta MS910.464. How is the caliper powered and how long does the battery last? The unit uses a single CR2032 battery; life depends on usage and display time, but replacement is straightforward and inexpensive. Is the caliper supplied ready for use and how is it delivered? The caliper is supplied in a protective plastic case for transport, with the battery fitted so the instrument is ready for immediate use. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Precision Caliper With Flat Measuring Faces, Swiss Digit 11mm Display, IP67 - Microtech Metrology
Take advantage of the combination of industry-grade accuracy, sealed electronics and an easy-to-read display for reliable workshop measurement. The built-in IP67 protection and conventional 0–150 mm range deliver robust everyday performance. Order the precision caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology digital caliper — 150 mm, IP67 The Microtech Metrology digital caliper is a 150 mm, workshop-grade measuring instrument with a Swiss Digit display, designed for general engineering and quality‑control tasks. IP67 dust‑ and water‑resistant housing Swiss Digit 11 mm digital display ±0.03 mm measurement accuracy 0–150 mm workshop measurement range Precise measurements that keep production consistent The instrument provides a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, matching the expectations for digital calipers used in machine shops and general quality control. With these specifications the tool reduces rework and inspection time because measurements are repeatable and quickly verifiable. The 150 mm measuring span places the device in the standard caliper class, which is the typical choice where reach, stiffness and one‑hand operation are balanced for everyday metalworking and assembly tasks. Built to withstand workshop conditions and daily handling Sealed to IP67, the device resists ingress from dust and temporary immersion, protecting the electronics and ensuring uptime in harsh conditions. The Swiss Digit display with 11 mm-high digits keeps readouts visible under workshop lighting, while the jaw length 40/60 mm provides reliable contact for common external and internal measurements. These design choices combine robustness and straightforward operation so the instrument remains serviceable and accurate, shift after shift. Faster checks and easier decisions on the shop floor A clear digital readout and tactile slide action speed up measurement cycles and reduce interpretation errors compared with purely analogue gauges. The caliper’s digital readout simplifies data capture and shortens the decision loop between measurement and action, helping to maintain throughput without sacrificing control. Metav’s distribution network ensures consistent supply and documentation, supporting small and medium workshops as well as established production departments with expert sourcing and dependable stock. Contact Metav Werkzeuge in Emmerich to discuss how the Microtech Metrology digital caliper fits current inspection routines or to request detailed technical documentation and purchasing advice Technical data Article number: 141840153 GTIN: 4061905036392 Manufacturer: Microtech Metrology Digital display: Swiss Digit, height 11 mm IP protection: IP 67 Measuring range: 0–150 mm Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display digit height: 11 mm Jaw length: 40/60 mm Special features Digital display (Swiss Digit) Dust‑ and water‑resistant to IP67 Standard caliper classification (100–300 mm) Suitable for workshop and industrial measurement FAQ What measuring range and accuracy does the caliper offer? The Microtech Metrology digital caliper covers 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm (SKU 141840153), suitable for general workshop inspection and production control. Is the device suitable for use in a busy workshop environment? Yes. The caliper is rated IP67, offering protection against dust and temporary immersion; the sealed electronics and clear Swiss Digit display make it robust for everyday workshop conditions. Can this caliper be used for quality‑control checks in production? The instrument is intended for standard quality‑control tasks where ±0.03 mm accuracy is acceptable. For ultra‑high precision laboratory work, consider specialised high‑precision instruments instead. How easy is the display to read in typical workshop lighting? The Swiss Digit display with 11 mm-high digits ensures good legibility at the bench, speeding up checks and reducing interpretation errors during repetitive measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With LCD Colour Display, IP67, Bluetooth, Rechargeable Lithium Battery, ABS/INC - Filetta
Take advantage of the combination of IP67 protection, Bluetooth data output, and 0.02 mm accuracy for dependable workshop measurements and seamless data capture. Order the Filetta MS910.474 digital caliper directly via Metav Werkzeuge or ask our consultants for integration advice. Filetta MS910.474 Digital Caliper — IP67 protection and Bluetooth data output The MS910.474 is a digital caliper for precision workshop and inspection tasks, offering a standard 0–150 mm measuring range with rugged protection and wireless data transfer. IP67 protection for dust and water resistance Bluetooth data output for wireless transfer 0.02 mm accuracy for precise measurements Rechargeable lithium battery and thumbwheel Industrial protection for reliable shop-floor use The caliper is built to perform reliably where shop‑floor conditions can be challenging. With IP67 ingress protection, the instrument resists dust and temporary immersion, reducing downtime from contamination or coolant exposure. Classified within the standard range (0–150 mm), this size balances reach and stiffness for everyday machining and metalwork tasks; the form factor supports reproducible readings across common inspection points. The robust construction and guarded jaws help maintain measurement stability during routine quality checks. Accurate measurement and streamlined data workflow Measurements are delivered with 0.02 mm accuracy and a 0.01 mm display resolution, providing confidence for standard industrial tolerances. The LCD colour display with day/night mode and a built‑in tolerance function makes deviations immediately visible, supporting quick go/no‑go decisions at the bench. Integrated Bluetooth output enables wireless transfer of readings to inspection software or spreadsheets, eliminating manual transcription and speeding up documentation. Dual‑format readout (mm/inch) and ABS/INC switching simplify mixed‑unit environments typical in international production. Ergonomic handling and ready-for-transport delivery Designed for repetitive use, the caliper features a fine thumbwheel for smooth, controlled movement and a lock screw to secure settings during measurement or part transfer. A dedicated depth gauge extends functionality for recesses and slot depths, while a rechargeable lithium battery reduces running costs and environmental impact compared with disposable cells. The instrument is supplied in a protective transport case, suitable for safe handling between workshop and inspection areas, ensuring the tool arrives ready for immediate use. Contact Metav Werkzeuge today for application support or to request the Filetta MS910.474 for integration into existing quality-control procedures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: MS910.474 Brand: Filetta Type: Digital caliper (0–150 mm) Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Jaw length: 40 mm Special features IP67 protection Bluetooth data output LCD colour display with day/night mode and tolerance function mm/inch readout, ABS/INC, Reset Thumbwheel for fine feed Lock screw Depth gauge Rechargeable lithium battery Delivered in transport case Digital instrument, battery rechargeable FAQ What measuring range does this caliper cover? The Filetta MS910.474 covers a 0–150 mm measuring range, making it a standard‑length caliper suitable for general machine‑shop and inspection tasks. How precise are the readings? Readings are provided with 0.02 mm accuracy and a 0.01 mm display resolution on the MS910.474, which matches typical industrial quality‑control requirements. Can measurement data be exported electronically? Yes, the caliper features Bluetooth data output for wireless transfer of readings to inspection software or logging systems. Does the instrument include depth measurement and locking? The caliper includes a depth gauge for recesses and a lock screw to secure a setting; this supports stable measurements during handling. How is the tool supplied for transport and storage? The MS910.474 is supplied in a protective transport case, ensuring safe transfer between workshop and inspection areas. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
150mm Digital Precision Caliper With Long Inside Measuring Tips, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of ISO 17025 calibration with certificate, robust IP54 protection and long internal measuring tips for reproducible shop‑floor measurements. Order the calibrated digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper — Microtech Metrology (long internal measuring tips, IP54) Digital caliper for precise workshop and inspection use with extended internal‑measurement jaws and splash protection High-precision digital display 0.01 mm ISO 17025 calibrated with certificate IP54 splash and dust protection Long tips for secure internal measurements Precision and traceability for routine inspection The calibrated instrument delivers a reliable measurement chain thanks to its ISO 17025 calibration and supplied certificate, which ensures traceability for quality control procedures. With a measuring range of 0–150 mm classified as Standard, the device balances reach and rigidity for everyday machine‑shop tasks. The electronic readout offers a resolution of 0.01 mm, while the specified accuracy of ±0.03 mm matches expectations for calipers in this range, so measured data can be used with confidence in production documentation. Robust design that suits the workshop environment Built for regular use on the shop floor, the slider is self‑lubricating and the unit meets IP54 for splash and dust resistance, reducing the risk of downtime due to contamination. The display is easy to read with an 11 mm digit height, supporting rapid checks under overhead lighting. Handmade measuring jaws and the longer tip geometry (40 / 41.5 mm) provide a firmer contact when taking internal dimensions, lowering measurement scatter and improving repeatability for bore and recess checks. Practical benefits and ease of integration The compact electronic format allows immediate digitised readings for faster process checks and reduced transcription errors. The combination of robust mechanical design and clear electronics shortens inspection cycles and streamlines quality routines. As a Standard‑range caliper it is ideal for benchwork and fixture checks where both reach and stiffness matter; the calibrated status simplifies incoming inspection and audits by providing documented accuracy from the first use. Contact Metav Werkzeuge for tailored advice on the calibrated Microtech Metrology digital caliper and to arrange purchase or further technical data Technical data Article number: 141130151 GTIN: 4061905036330 Manufacturer: Microtech Metrology Digital display height: 11 mm Protection class: IP54 Dimensions & accuracy Measuring range: 0–150 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Measuring tip length: 40 / 41.5 mm Features ISO 17025 calibrated — calibration certificate included Handmade measuring jaws Self‑lubricating slide system Long tips for internal measurements Digital caliper (electronic readout) FAQ Is the instrument delivered calibrated to a recognised standard? Yes. The Microtech Metrology digital caliper is delivered fully calibrated to ISO 17025 and includes the calibration certificate with the shipment. What are the resolution and stated accuracy for the 0–150 mm range? The electronic readout provides a 0.01 mm resolution and the caliper specification lists an accuracy of ±0.03 mm for the 0–150 mm measuring range. Can the caliper be used in a busy workshop environment? Yes. The device offers IP54 protection against dust and splashes and a rugged, self‑lubricating slide designed for frequent use on the shop floor. Are the jaws suitable for internal dimension measurement? The extended measuring tips (40 / 41.5 mm) and handmade measuring jaws give improved stability and contact when measuring internal diameters and recesses. Which model identifier should be quoted when ordering? Please refer to SKU 141130151 when enquiring about the calibrated Microtech Metrology digital caliper. Microtech Metrology: Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Precision Caliper With Long Internal Measuring Probes, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust inspection tool that combines IP67 protection, precise ±0.03 mm accuracy and wireless data transfer for efficient quality control. Supplied fully calibrated to ISO 17025 with certificate, the instrument ensures traceability and immediate integration into digital workflows — order directly via Metav Werkzeuge or contact our consultants for specification support. Digital Caliper (0–150 mm) by Microtech Metrology — IP67, Wireless data The Digital Caliper is a workshop-grade measuring instrument for general machine‑shop and quality‑control tasks, designed for reliable external and internal measurements across the standard 0–150 mm range. IP67 dust and water protection Delivered calibrated to ISO 17025 Wireless data output for SPC integration Swiss Digit display, 11 mm height Reliable measurements for everyday workshop control This instrument addresses routine dimensional checks by combining a measuring range of 0–150 mm with a resolution of 0.01 mm and an accuracy of ±0.03 mm, which corresponds to standard expectations for digital calipers used in mechanical engineering and shopfloor quality checks. The comparatively large Swiss Digit display (11 mm height) improves read‑out speed and reduces interpretation errors, supporting faster decision cycles on the production line. The component is classified in the Standard caliper category, offering the best compromise between reach, stiffness and one‑hand usability for typical 150/200/300 mm workshop baselines. Durable build and seamless data capture for efficient processes Rated IP67, the instrument withstands chips, coolant splash and brief immersion — a clear benefit for demanding shop environments where contamination and moisture are common. The built‑in wireless data output simplifies capture of measurement results, cutting manual transcription and enabling direct transfer to SPC systems or inspection software. That reduction in administrative steps accelerates process control and reduces the risk of data entry errors, delivering a measurable productivity gain in inspection routines. Traceability and conformity for professional quality assurance The caliper is supplied fully calibrated according to ISO 17025, including a calibration certificate that documents traceability and measurement uncertainty — essential for accredited inspection and internal quality records. This formal calibration step gives purchasing departments and QC teams confidence that the instrument meets reproducible standards from day one and can be integrated into audit‑ready measurement programmes. The combination of traceable calibration and wireless data capability makes the tool suitable for shops that expect consistent documentation and long‑term data logging. Contact Metav Werkzeuge for a technical consultation or a tailored supply proposal for the Microtech Metrology digital caliper (SKU 141130154) and its wireless integration — our specialists in Emmerich will advise on compatibility with existing inspection systems. Technical data Article number: 141130154 GTIN: 4061905452406 Brand: Microtech Metrology EClass: 21170344 Facts Measuring range: 0–150 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display height: 11 mm Protection class: IP67 Special features Wireless data output Digital display: Swiss Digit (11 mm) Supplied calibrated to ISO 17025 with certificate Category: Standard caliper (0–300 mm) SKU: 141130154 GTIN: 4061905452406 FAQ How accurate is the device for routine quality checks? The Digital Caliper from Microtech Metrology offers an accuracy of ±0.03 mm and a resolution of 0.01 mm, suitable for standard workshop and machine‑shop inspection tasks. Does the caliper come with a calibration certificate? Yes — the instrument is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability and documentation. Can measurement data be exported directly to inspection software? Wireless data output allows the caliper to transmit readings for integration into SPC systems and inspection software, reducing manual transfer steps. Is the caliper robust enough for use at the machine? With an IP67 rating, the caliper is protected against dust ingress and temporary immersion, making it suitable for shopfloor conditions with coolant splash and debris. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com