Carbide indexable inserts for high‑performance metalworking
Carbide indexable inserts are wear‑resistant cutting elements designed to deliver economical, precise material removal across a wide range of workpieces, offering excellent balance between extreme wear resistance and the toughness required to withstand mechanical shocks. Used on toolholders such as cutters, turning tools and twist drills, they enable efficient machining of materials from soft non‑ferrous alloys to high‑strength steels by optimising cutting forces and thermal stability. For standard accessible contours external coolant is often sufficient, while deep holes, heavy cutting or machining of stainless steel and titanium alloys benefit from internal coolant channels to protect the cutting edge, improve chip control and extend insert life. Key advantages include high durability, consistent surface finish and reduced tool changeover times through the use of replaceable indexable inserts, carbide grades and toolholder systems.
4.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT kombiniert HSS‑E Material mit 5% Kobalt und einer 135° Spitze für stabile, präzise Metallbohrungen; bestellen Sie den Bohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 4,9 mm (MetavCUT Standard Line) Der Spiralbohrer ist ein kurzer HSS‑E Metallbohrer für präzise Bohrungen mit Handbohrmaschine und stationären Maschinen. Kurzbauweise für hohe Stabilität und präzise Bohrbilder HSS‑E mit 5% Kobalt für erhöhte Warmfestigkeit Geschliffener Schaft für sehr hohe Rundlaufgenauigkeit 135° Spitzenwinkel für harte und legierte Stähle Geeignet für Handbohrmaschine und allgemeine Metallbearbeitung Präzision und Stabilität bei harten Werkstoffen Die kurze Ausführung reduziert die Auskraglänge und minimiert damit die Neigung zum Verbiegen, wodurch präzise Bohrlöcher bei Metallbearbeitung entstehen. Durch den 135° Spitzenwinkel dringt der Bohrer kontrollierter in härtere Materialien ein, was die Anbohrzeit verringert und das Wandern auf der Oberfläche reduziert. Anwender profitieren von saubereren Bohrkanten und weniger Nacharbeit beim Entgraten. Material und Fertigungsverfahren für längere Standzeiten Der Einsatz von HSS‑E mit 5% Kobalt erhöht die Warmhärte und die Verschleißfestigkeit bei Stahl und legierten Werkstoffen, sodass die Standzeit gegenüber einfachem HSS steigt. Die geschliffene Fertigung sorgt für besonders scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere, maßhaltige Löcher ermöglicht. Dieser Aufbau ist ideal für anspruchsvolle Metallarbeiten, bei denen saubere Ergebnisse wichtiger sind als extreme Bruchzähigkeit. Praktische Einsatzfelder und Maschinenkompatibilität Mit einem Durchmesser im Standard‑Bereich eignet sich der Bohrer für allgemeine Werkstattarbeiten, Montage und DIY‑Projekte in Metall, Gusseisen, Nichteisenmetallen und Kunststoff. Die Konstruktion ist auf die Nutzung in Handbohrmaschine und stationären Maschinen ausgelegt, wobei die kurze Spirallänge Stabilität bei typischen Bohrtiefen gewährleistet. Für besonders genaue Passungen empfiehlt sich vorheriges Zentrieren mit einem Ansenker oder Zentrierbohrer. Sicherer Einsatz und Pflegehinweise für optimale Ergebnisse Für dauerhafte Leistung sollten Werkstück und Bohrer sicher gespannt und mit geeignetem Kühlschmierstoff betrieben werden, besonders bei legierten Stählen. Moderate Vorschubkräfte und gleichmäßige Drehzahlen verlängern die Lebensdauer, und scharfe Kanten lassen sich durch fachgerechtes Nachschleifen wiederherstellen. Bei sehr tiefen Löchern oder empfindlichen Materialien ist schrittweises Aufbohren oder die Nutzung einer stationären Maschine empfehlenswert, um Bruchrisiken zu minimieren. Nutzen Sie den MetavCUT Standard Line Spiralbohrer für präzise Metallbohrungen und fordern Sie technische Beratung oder ein Angebot per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 an. Produktmerkmale Artikelnummer: 47049-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Typ: Typ N Material: HSS-E Daten Durchmesser: 4,9 mm Gesamtlänge: 86 mm Spirallänge: 52 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Farbe: 5% Kobaltlegiert Ausführung: kurz (reduzierte Gesamtlänge für Stabilität) Schaftausführung: Geschliffen (hohe Rundlaufgenauigkeit) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Für Bohrmaschine: Handbohrmaschine (geeignet für Handbetrieb und stationäre Maschinen) FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer 4,9 mm aus der Standard Line eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoff und liefert bei diesen Werkstoffen saubere Bohrbilder. Ist der Bohrer für die Handbohrmaschine geeignet? Ja, die kurze Ausführung des Spiralbohrers wurde für die Nutzung mit Handbohrmaschine und stationären Maschinen entwickelt und bietet dadurch höhere Stabilität und weniger Vibration. Warum ist die 135° Spitze vorteilhaft? Ein größerer Spitzenwinkel wie 135° reduziert die Anbohrkraft und verbessert das Eindringen in harte Werkstoffe, wodurch der Bohrer insbesondere bei Edelstahl und legierten Stählen effizienter arbeitet. Was bedeutet geschliffener Schaft und welche Vorteile bringt er? Die geschliffene Schaftausführung erzeugt sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was präzise, maßhaltige Bohrlöcher ermöglicht; der MetavCUT Spiralbohrer profitiert dadurch bei anspruchsvollen Metallarbeiten. Wie verlängere ich die Lebensdauer des Spiralbohrers? Spannung des Werkstücks sicherstellen, Kühlschmierstoff verwenden, gleichmäßige Drehzahl und moderater Vorschub sowie gegebenenfalls schrittweises Aufbohren bei tiefen Löchern verbessern die Standzeit des MetavCUT Spiralbohrers.
4.9mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Karosseriebohrer – Body Drill, HSS‑G, 4.9 mm, 135° tip, double‑sided, black finished, fully ground The Karosseriebohrer Body Drill is a double‑sided Twist Drill designed for precise metal drilling with a 135° tip angle, ideal for use with a Drilling Machine. Short, robust double‑ended design for stable drilling HSS‑G fully ground for fast, precise metal cuts 4.9 mm diameter with 135° tip for harder materials Black finished surface for reduced glare and corrosion resistance Drill faster into hardened metals with less effort For workshop tasks demanding reliable entry into tough materials, this Twist Drill delivers consistent performance. Its HSS‑G composition and fully ground shaft geometry provide razor‑sharp cutting edges and high concentricity, which translates to cleaner holes and reduced runout. Because the tip is ground to 135°, the drill penetrates harder alloys and stainless steels with less wandering, shortening pilot operations and improving repeatability on stamped or welded components. Designed for sustained use in metalworking environments Stability and longevity matter when working with sheets and cast parts. The double‑sided configuration acts like two drills in one: when one end becomes dull the tool can be reversed, extending service life and reducing tool change downtime. The black finished without margin coating offers modest corrosion protection and less surface reflection during machining. The fully ground geometry means CNC‑grade flute accuracy, which enhances chip evacuation and hole quality under moderate cooling. Optimised geometry for workshop machines and manual drills Compatibility with a Drilling Machine and sturdy hand drill setups is a practical advantage of this Body Drill. Its short overall length and robust design suit applications such as sheet metal, bodywork and thin‑wall assemblies where controlled, repeatable holes are required. Users benefit from easier centring and reduced feed force thanks to the point geometry, making the tool especially suitable for fastening and rivet‑preparation tasks in automotive and fabrication contexts. Who benefits and when to choose this drill Choose this tool when working with alloyed or unalloyed steel, cast materials or hard plastics where precision and edge quality are critical. Professionals in fabrication, maintenance and vehicle body repair will find the balance of speed and control useful for repetitive, high‑quality drilling. For occasional amateur use, the reversible tip offers economical value by prolonging usable life between resharpening cycles. For tailored advice on whether the MetavCUT Karosseriebohrer Body Drill fits your application, or to get further technical data, contact METAV Werkzeuge for competent consultation: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Karosseriebohrer / Body Drill Brand: MetavCUT SKU: 59049-FDA Diameter: 4.9 mm Tip Angle: 135° Version: double-sided Colour: black finished without margin For Use With: Drilling Machine Spiral Length: 13 mm Overall Length: 58 mm Shaft Execution: fully ground Material: HSS-G Model Series: Profi Line Application: Drills for metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Karosseriebohrer Body Drill is primarily applied when machining high‑strength materials and larger diameters; its form allows straightforward resharpening and it withstands significant loads, making it suitable for rivet and thin‑sheet holes common in bodywork. Why are Twist Drills pointed? The tip geometry of the MetavCUT Karosseriebohrer Body Drill reduces the cross‑cut at the point, lowering friction forces so less feed force is needed and improving centring of the tool in the workpiece. Can you use a Twist Drill to drill wood? A metal Twist Drill like the MetavCUT Karosseriebohrer Body Drill can be used in wood, but guidance is inferior and the hole finish is less clean; however these drills are easier to resharpen and show less self‑feeding than specialized wood bits. At which drilling depths is a Twist Drill most commonly used? The MetavCUT Karosseriebohrer Body Drill is typically used for through‑hole drilling in solid material; for diameters up to about 20 mm and depths up to 100 mm, the Twist Drill is the most frequent choice. Which three drill types are there? Metal drill, wood drill, and masonry/concrete drill are the three basic categories commonly distinguished. What is better, HSS or HSSE? When selecting between HSS and HSSE for tools like the MetavCUT Karosseriebohrer Body Drill, note that HSSE is not universally superior; evaluate the actual working conditions to decide if the higher cost of HSSE is justified.
4.9mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
MetavCUT Body Drill (Karosseriebohrer) — 4.9 mm, 135° Tip, Double‑Sided, Bright Finished, HSS‑G The MetavCUT Body Drill (Karosseriebohrer) is a purpose‑built Twist Drill for metalworking, designed for use in drilling machines and suitable for precision holes in sheet and structural steels. Double‑Sided design for two usable tips HSS‑G fully ground for precise holes 135° tip angle for harder materials Bright finished surface for smooth chip evacuation Short, stable geometry ideal for body and sheet metal work High performance for demanding metal drilling The MetavCUT Body Drill is engineered for efficient metal removal: the HSS‑G material and CNC grinding process produce very sharp cutting edges and high concentricity, which enables up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills. The 135° tip angle reduces the tendency to grab and is optimised for harder materials such as alloyed and unalloyed steels, cast steels and non‑ferrous metals, delivering reliable entry and consistent hole quality. Precision by design — why the fully ground geometry matters A fully ground flute and shank mean the chip geometry and cutting edges are created by grinding rather than rolling. This yields excellent run‑out accuracy and clean, burr‑reduced holes in metal. Because ground HSS can be more brittle than rolled variants, best results are achieved with steady drilling speeds and appropriate cooling. The bright finished surface supports smoother chip flow and reduces heat build‑up at the cutting zone. Optimised for metal‑working applications and workshop use Designed primarily as a Twist Drill for metal, this tool is well suited to bodywork, thin plate and structural drilling tasks. The double‑ended execution provides two cutting tips in one: when one end dulls it can be reversed for immediate reuse, a practical advantage in production and maintenance environments. The geometry and material make the tool a good match for both stationary drilling machines and robust workshop setups where repeatability and hole quality are critical. Practical advantages for professionals The short, stable form factor commonly used in body and sheet metal operations improves guidance and reduces vibration during drilling, resulting in more accurate hole placement. The fully ground shank enhances clamping accuracy in chucks and collets. For users seeking durability and re‑sharpenability, the drill’s HSS‑G construction allows straightforward resharpening while maintaining a reliable cutting performance under appropriate cutting conditions. For dependable, workshop‑grade metal drilling choose the MetavCUT Body Drill — contact METAV Werkzeuge for personalised technical advice and ordering support: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Body Drill / Karosseriebohrer Marke: MetavCUT SKU: 58049-FDA Diameter: 4.9 mm Total Length: 58 mm Spiral Length: 13 mm Tip Angle: 135° Material: HSS‑G Execution: Double‑Sided (Doppelendbohrer) Shaft Finish: Fully Ground (geschliffen) Surface Finish: Bright Finished For Use In: Drilling Machine / Hand drills suitable depending on machine setup Model Series: Standard Line Application: Drills for metal, including alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the MetavCUT Body Drill suitable for? The MetavCUT Body Drill is intended as a Twist Drill for metalworking; it performs well in body and sheet metal tasks as well as when drilling alloyed and unalloyed steels, cast materials and non‑ferrous metals, offering clean holes and good run‑out accuracy. How should the MetavCUT Body Drill be used to achieve the best results? Use the MetavCUT Body Drill at appropriate speeds for the material, apply steady feed, and employ cooling/lubrication for tougher alloys; the fully ground geometry benefits from proper clamping and steady drilling to exploit its precision advantages. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and larger drill diameters. Their shape allows easy regrinding, and they withstand substantial loads; they are particularly common for drilling holes in metal and thick sections. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Masonry/Concrete Drills.
4.9mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Extra Short, 4.9 mm, 135° Point, HSS‑G, Bright Finished, DIN 1897 — MetavCUT A Twist Drill (Type N) for metalworking, engineered as an extra short HSS‑G bit for use in hand and drilling machines. Extra short HSS‑G design for greater stability 135° tip for harder materials and fast entry Cylindrical shank for universal chuck compatibility 4.9 mm diameter with 24 mm spiral length for metalwork Complies with DIN 1897 for robust hand‑drill applications Greater efficiency and durability for metal drilling The extra short design delivers improved rigidity and reduced breakage risk when working with metal. Manufactured from HSS‑G, this bit allows up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS variants, making it particularly efficient for alloyed and unalloyed steel, cast steel, gray cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. The compact geometry is especially advantageous when drilling thin sections or in confined spaces where conventional lengths are impractical. Reliable performance in tight spaces and portable setups Designed to DIN 1897 as an extra short Twist Drill, the shortened Overall Length and reduced Working Length increase torsional resistance and decrease vibration. The cylindrical shank fits standard three‑jaw chucks, offering universal compatibility with hand and angle drills while improving concentricity. This construction supports steady drilling under manual guidance and reduces the chance of chatter when accessing narrow profiles or sheet metal. Precision entry and material suitability explained Equipped with a 135° Point Angle, the Type N spiral geometry is tuned for harder workpiece materials, shortening the initial cutting time and improving centering on tougher alloys. With a nominal Diameter of 4.9 mm, a Spiral Length of 24 mm and an Overall Length of 58 mm, the bit provides a balanced ratio between cutting depth and structural stiffness. The Normal Spiral (Type N) is the classic metal‑drilling profile and is not optimized for very soft materials. Handling, maintenance and practical tips for long life Periodic resharpening restores cutting geometry and maintains the reduced thrust advantage of the pointed tip; the ground HSS‑G material is regrindable and holds its edge under demanding loads. Appropriate cutting fluids extend tool life when machining steels and cast materials. To avoid slippage in a cylindrical shank, ensure secure clamping in the chuck and apply controlled feed; for high torque applications a three‑flat or hex shank could be preferred, but the cylindrical shaft here offers broad flexibility for general metalworking tasks. Strong recommendation: For reliable metal drilling in constrained or manual setups, choose the MetavCUT Twist Drill Type N in extra short HSS‑G; for further technical guidance or project advice contact METAV Werkzeuge by eMail info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56049-FDA Diameter: 4.9 mm Point Angle: 135° Type: Type N Finish: Bright finished Execution: Extra short Material: HSS-G Standard: DIN 1897 Shank Execution: Cylindrical Spiral Length: 24 mm Overall Length: 58 mm For Drilling Machine: Hand/Drilling Machine Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Can the MetavCUT Twist Drill Type N be used in a cordless hand drill? The MetavCUT Twist Drill Type N is suitable for use in hand drills and portable drilling machines when clamped securely in a proper chuck. The extra short length enhances stability under manual operation, but correct chuck tightening and appropriate feed are essential to prevent slippage of the cylindrical shank. Is the MetavCUT Twist Drill Type N suitable for stainless and hardened steels? The MetavCUT Twist Drill Type N with a 135° tip is designed for harder workpiece materials and offers improved entry and centering on tougher steels; use suitable cutting fluid and moderate speeds for optimal life and hole quality. For what are Twist Drills used? Twist Drills are mainly applied to the machining of high‑strength materials and larger hole diameters. Their form is easy to regrind and withstands higher loads, making them the standard choice for metal drilling tasks where robustness and serviceability are required. Which 3 drill types are there? The three common drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill group and is optimized for ferrous and many non‑ferrous materials.
4.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — short HSS‑G 4.9 mm, 135° (Type N), bright finished The Twist Drill short HSS‑G 4.9 mm is a precision metal‑drilling bit for drilling machines and hand drills, designed for stable, accurate holes in hard materials. Short HSS‑G design for metal drilling 135° point angle for harder materials Fully ground shank for high concentricity Conforms to DIN 338 for short twist drills Profi Line finish for precise, clean boreholes High performance for demanding metal work The Twist Drill from MetavCUT is engineered as a short HSS‑G cutting tool that achieves up to 40% faster drilling with 50% less thrust force compared with conventional HSS drills, thanks to the ground geometry. The reduced cantilever length increases stability and reduces deflection, so the bit cuts cleaner and requires less rework. This makes the tool particularly suited for precision tasks in workshops and production environments where efficiency and repeatability matter. Reliable drilling in hard and alloyed materials With a 135° point angle and Type N normal spiral, this short twist drill is optimised for stainless steel, alloyed and unalloyed steels, cast steels, sintered iron and hard plastics. The DIN 338 classification confirms the design as a short cylindrical shank drill in HSS‑G quality, where grinding creates very sharp cutting edges and high runout accuracy. For users with limited metallurgical knowledge: a larger point angle reduces initial cutting forces and improves centring when penetrating tougher surfaces. Greater control and easier handling The fully ground shank and shortened overall length give the drill superior concentricity and less vibration in both drilling machines and compatible hand drills. Where rigidity is essential, the short design minimises chatter and improves hole quality. For workshop use, this means fewer tool changes and less scrap. Note that ground HSS drills are harder but can be more brittle than rolled alternatives, so recommend controlled feed, suitable cooling and stationary clamping for maximum tool life. Designed for professionals who demand precision Part of the Profi Line, the bright finished short twist drill combines a smooth surface with precise geometry to deliver clean chips and reliable hole tolerance. The 4.9 mm diameter and 86 mm overall length balance reach and rigidity for common metalworking tasks. For those seeking expert advice on suitability for specific alloys, hole tolerances or recommended feed rates, MetavCUT tools are supported by METAV Werkzeuge with comprehensive, competent consultation and after‑sales support. Strong recommendation: Choose the MetavCUT short Twist Drill for precise, efficient metal drilling and contact METAV Werkzeuge for tailored technical advice via info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48049-FDA Diameter: 4.9 mm Point angle: 135° Type: Type N Execution: short Spiral length: 52 mm Overall length: 86 mm Shank execution: fully ground Finish/Colour: bright finished Material: HSS-G Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine / Hand drill Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for The MetavCUT Twist Drill short HSS‑G is primarily used for drilling high‑strength materials and larger diameters in metalworking; its ground design keeps cutting edges very sharp and maintains precision under demanding loads. Which three drill types exist When classifying common drill categories, there are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for steel and other hard materials. Why are twist drills sharpened Twist drills are sharpened to reduce the cross cutting edge at the tip, which lowers friction and required feed force while improving centring; sharpening the MetavCUT Twist Drill therefore reduces heat and makes guided entry into the workpiece easier. Can a metal twist drill be used in wood A metal drill such as the MetavCUT Twist Drill can be used in wood, but it will usually give less precise guidance and a rougher finish compared with a dedicated wood drill; however, metal drills are easier to resharpen and typically have less aggressive self‑feeding.
40 x 10 x 2.8/3.8 x 40D Granulator And Shredder Knife, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of precision-ground cutting edges, robust 1.3207 EW9Co10 alloy and exact fit for ECON systems to maintain a steady production flow and consistent pellet quality; Order the ECON01 shredding and granulator knife directly via (Metav Werkzeuge) or ask our consultants if needed. ECON01 Shredding and Granulator Knife — 40 x 10 x 2.8/3.8 x 40D, 1.3207 EW9Co10 (MetavCUT) A ECON01 knife engineered as a wear part for shredders and granulators in ECON recycling systems, designed to deliver consistent particle size and reduced dust during continuous operation. High-wear alloy 1.3207 EW9Co10 Precision-ground cutting edges Designed for ECON shredders and granulators Low dust and consistent pellet quality Reliable cuts that improve downstream quality The knife is made from 1.3207 EW9Co10, a high-performance tool alloy chosen for its balance of hardness and toughness. In practical terms, this material supports longer tool life under the impact and abrasion typical of recycling applications while keeping the edge geometry stable. The result is consistent cut quality, which reduces fines and minimises the generation of dust during shredding or pelletising. For operators focused on yield and regrind quality, a stable edge profile directly improves downstream processes such as sieving and extrusion. Fewer stoppages through durable construction Constructed as a central wear part for shredders, cutting mills and granulators, the ECON01 is precision-ground to close tolerances so it seats accurately in rotors and cutting assemblies. Accurate seating reduces vibration and uneven wear, contributing to predictable maintenance intervals and fewer unscheduled stops. This increase in operational reliability translates into measurable productivity gains and lower overall maintenance effort for a continuous recycling line. Designed for smooth integration and consistent throughput The ECON01 knife matches the form and function expected in ECON recycling equipment, with the 40 x 10 x 2.8/3.8 x 40D profile tailored for standard installations. In shredding applications it converts bulky input — such as film, pipes, sprues or sheets — into manageable pieces; in granulation it ensures even pellet geometry after extrusion. The precision fit and consistent edge quality help reduce process variation and support higher throughput without compromising the regrind uniformity required for re-extrusion. Contact Metav Werkzeuge for tailored advice on MetavCUT ECON01 blades to secure reliable throughput and optimised regranulate quality Technical data Article number: ECON-ECON01-40x10x2.8/3.8x40D-13207-EW9Co10 Name: Shredding knife / Granulator knife ECON01 Material: 1.3207 EW9Co10 Dimensions: 40 x 10 x 2.8/3.8 x 40D Manufacturer: MetavCUT Core data SKU: ECON-ECON01-40x10x2.8/3.8x40D-13207-EW9Co10 Profile: 40 x 10 x 2.8/3.8 x 40D Material grade: 1.3207 EW9Co10 Applications & features Suitable for ECON recycling, shredding and pelletising systems Central wear part in shredders, cutting mills and granulators Precision-ground cutting edges for consistent pellet geometry Reduces dust and fines for improved downstream processing FAQ What materials are suitable for processing with this knife? The ECON01 is intended for common plastic recycling tasks including film, pipes, sprues and sheets; its design supports both shredding and granulating applications where consistent particle size is required. How is the ECON01 supplied for installation in ECON machines? The knife is manufactured to the stated profile and tolerances so it fits ECON rotors and cutting assemblies; the 40 x 10 x 2.8/3.8 x 40D geometry corresponds to standard mounting and seating requirements. What performance advantage does the 1.3207 EW9Co10 material provide? The 1.3207 EW9Co10 alloy combines wear resistance with edge stability, helping the knife maintain cutting geometry longer under abrasive and impact loading typical in recycling operations. How does the knife affect dust and regranulate quality? Sharp, precision-ground edges reduce fragmentation and fines during cutting; this lowers dust generation and yields a more uniform regranulate that is easier to handle in extrusion and sieving stages. Is this a direct alternative to original manufacturer parts? The ECON01 from MetavCUT is offered as a process-optimised wear part that is dimensionally compatible with ECON equipment and developed for productive, heavy-duty use. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process-optimised wear parts are precisely matched, long-lasting and specifically developed for productive operation.
40 x 10 x 2.8/3.8 x 40D Granulator Knife For ECON Machines M2 1.3343 DMo5 - MetavCUT
Take advantage of the combination of precise cutting geometry, robust M2 tool steel and straightforward maintenance to keep production flowing with minimal downtime; order through Metav Werkzeuge or consult their specialists for compatibility and delivery options. ECON01 Granulator and Shredder Knife — M2 tool steel, 40 x 10 x 2.8/3.8 x 40D The ECON01 is a granulator and shredding knife designed for ECON recycling machines, engineered to deliver consistent pellet quality in continuous processing environments. Robust M2 tool steel construction Precision ground cutting edges for consistent pellets Direct replacement for ECON recycling systems Reduced dust generation for cleaner operation Consistent pellet quality through precise cutting geometry A clean, repeatable cut is central to efficient pellet production. The finely finished cutting edge on this wear part keeps shear forces consistent, producing uniform pellet size and reducing fines and dust. That outcome improves downstream screening and drying efficiency and lowers rework rates. The geometry has been optimised for steady feed and minimal material smearing, which also contributes to longer intervals between service interventions and a more reliable production rhythm. Durable M2 tool steel for predictable wear performance Manufactured from M2 1.3343 (DMo5) high-speed tool steel, the blade offers high hardness and thermal stability for repetitive cutting tasks in recycling and granulation. The material choice provides superior wear resistance compared with softer steels while remaining regrindable to restore cutting geometry on-site or via service partners. Predictable wear behaviour simplifies spare-part planning and reduces unexpected stoppages, supporting continuous throughput and lower lifecycle costs per tonne of processed material. Compatibility and straightforward maintenance for high uptime Sized at 40 x 10 x 2.8/3.8 x 40D, the knife is produced to fit ECON granulators and shredders without modification, enabling rapid swap-out during scheduled maintenance. The blade’s finish and tolerance support plug-and-play replacement, which shortens machine downtime and simplifies inventory management. Supplied as a production-ready wear part, it aligns with industrial maintenance regimes and is suitable for processing a broad range of plastics in recycling lines, from films and pipes to sprues and offcuts, while helping to maintain a cleaner working environment. For tailored advice on fitment to ECON machines, batch availability or technical drawings, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com — their specialists will advise on selection, supply and delivery. Technical Data SKU: ECON-ECON01-40x10x2.8/3.8x40D-M2-13343-DMo5 Label: Zerkleinerungsmesser / Granuliermesser 40 x 10 x 2.8/3.8 x 40D ECON01 für ECON Maschinen aus M2 1.3343 DMo5 Manufacturer: MetavCUT Material: M2 1.3343 DMo5 Dimensions: 40 x 10 x 2.8/3.8 x 40D Facts Blade length: 40 mm Blade width: 10 mm Thickness: 2.8/3.8 mm Reference: 40D cutting diameter Special features Application: shredders, granulators, pelletisers Suitable for: recycling plants and granulation systems of ECON Benefit: reduced dust and improved pellet consistency Finish: precision ground cutting edges FAQ What materials can this knife process? The ECON01 granulator knife is intended primarily for polymer recycling applications and is used to cut plastics such as films, pipes and sprues in ECON shredders and granulators. Is the ECON01 suitable as a direct replacement in existing ECON machines? Yes — the ECON01 is manufactured to the specified dimension set for ECON systems and is supplied for direct fitment in compatible granulators and shredders. How does the M2 1.3343 (DMo5) material affect service life? Blades made from M2 1.3343 (DMo5) offer a balance of hardness and toughness that extends the service interval and allows economical regrinding to restore cutting geometry when required. Can the knife be reground on-site, or is specialist service required? The ECON01 blade is designed to be regrindable; reconditioning can be carried out by qualified workshop personnel or returned to a service partner to restore edge geometry. Where to request technical drawings or batch pricing? Technical drawings, batch availability and pricing information are available from Metav Werkzeuge; reference the SKU ECON-ECON01-40x10x2.8/3.8x40D-M2-13343-DMo5 when enquiring. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Mit unserer Marke MetavCUT bieten wir eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Prozessoptimierte Verschleißteile, passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40 x 10 x 2.8/35D Granulator Knife For Recycling Machines, M2 1.3343 DMo5 - MetavCUT
Benefit from precise geometry and durable M2 tool steel for consistent pellet quality and reduced dust generation; order compatible spare knives directly via Metav Werkzeuge or consult the sales team for compatibility and delivery. ECON01 granulator knife — Granulating and shredding blade, M2 tool steel, 40 x 10 x 2.8/35D The ECON01 is a granulating and shredding blade engineered for use in ECON recycling and pelletising systems, combining precise cutting geometry with high-wear material for continuous industrial operation M2 tool steel for high wear resistance Precise 40 x 10 x 2.8/35D dimensions Designed for ECON recycling systems Sharp, uniform cutting edge for low dust Consistent output through exact cutting geometry A granulator's efficiency depends on a blade that delivers uniform cuts; the 40 x 10 x 2.8/35D profile provides repeatable geometry, which results in consistent pellet size and more stable downstream processing. Precision in the blade thickness and bevel reduces material rebound and prevents oversized fragments, supporting steady throughput and minimising rework. The specified profile is particularly advantageous in systems where pellet homogeneity and low fines are required for direct reprocessing into extrusion or injection moulding. Durable performance from M2 high-speed tool steel Constructed from M2 1.3343 DMo5 high-speed tool steel, the knife offers elevated wear resistance and thermal stability compared with standard carbon steels. This material choice extends service life under abrasive conditions common in plastic recycling, including operations with films, pipes and mixed-production sprues. The higher red-hardness of the steel preserves a sharp edge for longer, reducing frequency of blade changes and delivering a favourable cost-per-tonne processed figure for high-volume production environments. Improved plant cleanliness and operational reliability A sharp, well-matched cutting edge reduces dust generation and the occurrence of fines, contributing to a cleaner working environment and less material loss. The blade’s geometry and finish promote low vibration and balanced cutting forces, which helps to maintain rotor and knife-holder integrity over time. Compatibility with ECON shredders and pelletisers ensures proper fitment, enabling straightforward replacement without extensive setup. Where regular exchange intervals are part of maintenance scheduling, using a dimensionally accurate spare supports predictable downtime planning. With the MetavCUT approach to spare parts, operational continuity is prioritised alongside cost efficiency. Our process-optimised wear parts are produced to match original machine interfaces and to withstand the demands of continuous recycling production. With precise tolerances and robust material selection, the result is reliably consistent cutting performance that supports production targets. We provide for operators and procurement teams a direct supply route from stock in Emmerich, backed by technical data and fitment confirmation to assist specification and planning. With our MetavCUT range customers receive an economic alternative to original manufacturer parts: process-optimised wear parts that are precision-fit, long-lasting and developed for productive industrial use Select MetavCUT blades via Metav Werkzeuge to secure compatible, production-ready replacements for ECON systems and arrange specification checks with our sales team at Metav Werkzeuge Technical data Article number: ECON-ECON01-40x10x2.8/35D-M2-13343-DMo5 Material: M2 1.3343 DMo5 Designation: ECON01 Brand: MetavCUT Core data Dimensions: 40 x 10 x 2.8/35D Suitable for: Recycling and granulating applications Compatible with: ECON shredders and pelletisers UID: ECON-ECON01-40x10x2.8/35D-M2-13343-DMo5 Special features Sharp uniform cutting edge Process-optimised fit for holder interfaces Low dust generation Durable high-speed tool steel FAQ What materials can this knife process? The ECON01 granulator knife, made from M2 1.3343 DMo5, is intended for common recycling tasks such as cutting films, pipes, sprues and other plastic waste in ECON shredders and pelletisers. How does M2 material affect service life? M2 tool steel in the ECON01 blade provides higher wear resistance and thermal stability, extending edge life under abrasive conditions and reducing blade-change frequency. Is the ECON01 directly compatible with ECON machines? Compatibility is designed for ECON recycling and granulating machines; the blade’s 40 x 10 x 2.8/35D profile matches standard ECON knife holders for direct replacement. Can the blade reduce dust and fines during processing? A sharp, accurately ground cutting edge on the ECON01 promotes cleaner cuts, lowering dust and fines compared with worn or mismatched blades. How should the part be specified when ordering? Reference the article number ECON-ECON01-40x10x2.8/35D-M2-13343-DMo5 and the designation ECON01 to ensure the correct MetavCUT granulator knife is supplied. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 20 x 1.6 x 40D Granulator/Crushing Knife, 1.3207 EW9Co10 - MetavCUT
The precision of the ECON04 blade, realised in high-alloy 1.3207 EW9Co10, and its exact 40 x 20 x 1.6 x 40D profile ensure durable cutting performance and uniform pellet output; order the blade directly via Metav Werkzeuge or consult our specialists for application-specific advice. ECON04 Granulator and Shredder Blade — 1.3207 EW9Co10, 40 x 20 x 1.6 x 40D (MetavCUT) The ECON04 is a granulator and shredder blade engineered for ECON recycling systems, optimised to reduce plastic waste to processable sizes and to deliver consistent pelletising results. MetavCUT ECON04: 1.3207 EW9Co10 high-alloy steel Precision-ground 40 x 20 x 1.6 mm profile Compatible with ECON granulators and shredders Optimised for consistent pellet quality Proven cutting performance for continuous recycling The blade is manufactured from 1.3207 EW9Co10, a high-alloy steel grade selected for its wear resistance and edge stability. This material provides a reliable baseline for long tool life under the cyclic loads typical in shredders and granulators. The combination of the alloy composition and the precision grind reduces flank wear, which preserves cutting geometry and extends service intervals. As a result, plants can rely on steady throughput and a predictable maintenance rhythm, supporting efficient line planning and reduced unscheduled downtime. Precision geometry that supports uniform pellets and low dust A precisely produced edge geometry is crucial for pellet quality. The 40 x 20 x 1.6 x 40D specification denotes the blade's working profile and cutting radius, tailored to match the rotor and fixed-knife arrangements found in ECON equipment. This controlled geometry enables clean shearing of film, pipes, sprues and bulk scrap, which in turn produces uniform pellets and minimises fines and dust. Reduced dust not only improves material yield but also lowers cleaning effort and the risk of contamination in subsequent processing stages. Durable design for productive, process-ready operation The blade is a process-optimised wear part designed for productive use in industrial recycling and pelletising lines. Heat treatment and finishing steps produce an edge that balances toughness with hardness, delivering resistance to chipping while maintaining sharpness over extended runtimes. The result is a component that supports constant quality output and predictable replacement cycles; this supports overall equipment effectiveness and contributes to a lower cost per kilogram of recycled material processed. Compatibility and practical handling on ECON systems Designed specifically for ECON shredders and granulators, the blade aligns with the manufacturer's mounting and dimensional standards to ensure fitment without modification. Precision in the blank dimensions and the drilled profile (where applicable) reduces fitting time during maintenance windows and helps maintain optimal rotor clearances. Spare-part planning therefore becomes straightforward: labelled stock can be rotated into production quickly, and service teams benefit from a consistent part geometry that matches machine tolerances. We offer an economical alternative to original manufacturer parts under the MetavCUT brand: our process-optimised wear parts are precisely fitting, durable and specifically developed for productive use. Contact Metav Werkzeuge today to discuss how MetavCUT ECON04 blades can improve pellet quality and uptime, and to arrange fast supply from our Emmerich warehouse. Technical data Article number: ECON-ECON04-40x20x1.6x40D-13207-EW9Co10 Name: ECON04 granulator/shredder blade Material: 1.3207 EW9Co10 Dimensions: 40 x 20 x 1.6 x 40D Manufacturer: MetavCUT Facts Size specification: 40 x 20 x 1.6 x 40D Material grade: 1.3207 EW9Co10 SKU: ECON-ECON04-40x20x1.6x40D-13207-EW9Co10 Special features Application: shredding, granulating, pelletising Compatibility: ECON recycling and granulator machines Benefit: consistent pellet quality, reduced dust Design: precision-ground cutting edge, process-optimised wear part FAQ What materials can this blade process? The ECON04 blade, made from 1.3207 EW9Co10 steel, is intended for processing typical plastics encountered in recycling lines, including films, pipes, sprues and plates as specified for ECON shredders and granulators. How does the ECON04 influence pellet quality? A precision-ground geometry and stable edge retention ensure clean shearing and uniform fragment size, which helps produce consistent pellets and reduces fine dust during pelletising. Is the ECON04 compatible with all ECON machines? The blade is specified for ECON shredders and granulators; compatibility details such as mounting and rotor clearance should be checked against the machine's parts list to ensure correct fit. What replacement benefits does this MetavCUT blade offer compared with OEM parts? MetavCUT ECON04 blades are process-optimised to match machine tolerances, offering precise fit, robust edge life and consistent output quality as an economical alternative to original manufacturer components. MetavCUT / Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 20 x 1.6 x 40D Shredding/Granulator Knife, M2 1.3343 DMo5 - MetavCUT
Take advantage of a precision-engineered wear part that combines durable M2 1.3343 DMo5 tool steel, exact 40 x 20 x 1.6 x 40D dimensions and compatibility with ECON recycling systems to maintain consistent pellet quality and reduce unplanned downtime. Order the knife directly via Metav Werkzeuge or request tailored advice from our consultants. ECON04 granulation and shredding knife, M2 tool steel, 40 x 20 x 1.6 x 40D — MetavCUT The ECON04 is a granulating and shredding knife designed for ECON recycling, shredding and pelletising equipment, optimised to deliver uniform particle size and lower dust generation in plastic reprocessing applications. Precision ground M2 tool steel Dimensions 40 x 20 x 1.6 x 40D Compatible with ECON recycling machines Reduced dust and uniform pellet output Consistent pellet quality for reliable production Precision manufacturing of the blade geometry delivers uniform pellets and a stable production process. Manufactured from M2 1.3343 DMo5, the knife retains a sharp cutting edge under continuous load, which results in fewer fines and more consistent downstream processing. For operators, this means less screen clogging and a lower reject rate; for procurement, it translates into predictable output and reduced waste disposal costs. The cutting behaviour is tuned for common recycling tasks including films, pipes and sprues, ensuring that the processed material meets the requirements for further extrusion or regranulation. Durable tool steel that extends service intervals The choice of M2 1.3343 DMo5 high-speed tool steel provides a balance between edge retention and toughness that is suitable for abrasive and contaminated plastics streams. Heat-treatment and grinding yield a wear-resistant surface that delays the drop in cutting performance and extends intervals between resharpening or replacement. As a result, maintenance cycles are lengthened and machine uptime is improved. The material properties also reduce the frequency of emergency stoppages caused by blunt tools, supporting continuous operation in high-throughput recycling lines. Exact fit for ECON systems and straightforward integration Designed specifically for ECON machines, the knife’s 40 x 20 x 1.6 x 40D specification ensures a precise fit and repeatable alignment in the knife carrier. A precise match reduces vibration and promotes even blade wear, which in turn protects the rotor and feed components from uneven loading. Because the geometry is engineered to the original tool envelope, installation is straightforward and does not require modifications to the holder. This compatibility supports a rapid return to production after replacement, maintaining processing stability on shredders, granulators and pelletisers. Fewer process issues and easier material handling Sharp, accurately ground cutting edges reduce the generation of fine particles and dust, improving material handling and the quality of the regranulate. Lower dust levels also ease filtration requirements and minimise housekeeping effort around the machine. The combination of good edge stability and correct cutting geometry supports a cleaner cut, producing strands and chips that are easier to dry and convey, thereby streamlining subsequent processing steps and improving overall throughput. Practical lifecycle and value for procurement As a process-optimised wear part from MetavCUT, the knife offers an economical alternative to original manufacturer components while retaining the core functional characteristics required for industrial recycling. The focus on durable steel and consistent geometry reduces total cost of ownership by extending service life and cutting maintenance hours. Decision-makers benefit from predictable performance and simplified stock management when selecting a standardised replacement blade for ECON equipment. Contact Metav Werkzeuge for a tailored quotation or compatibility check based on machine type and processing material — Metav Werkzeuge provides fast, expert support from Emmerich to keep production running smoothly Technical Data Article number: ECON-ECON04-40x20x1.6x40D-M2-13343-DMo5 Designation: ECON04 Brand: MetavCUT Facts Dimensions: 40 x 20 x 1.6 x 40D Special features Material: M2 1.3343 DMo5 Application: granulation and shredding in recycling and pelletising systems Suitable for: recycling plants, shredding systems and pelletising equipment of the ECON manufacturer FAQ What materials can this knife process effectively? The ECON04 granulation and shredding knife, manufactured in M2 1.3343 DMo5 by MetavCUT, is intended for a broad range of plastic waste such as films, pipes and sprues where reliable cutting and uniform pellet formation are required. How does the ECON04 affect pellet quality and dust levels? A precisely ground geometry and wear-resistant M2 steel minimise fines and dust, producing more uniform pellets and improving downstream handling compared with blunt or ill-fitting blades. Is the knife a direct replacement for original ECON parts? The knife is specified for use in ECON recycling and pelletising machines and is supplied to match the required 40 x 20 x 1.6 x 40D envelope for straightforward installation and alignment. How often will the blade need replacement or resharpening? Service intervals depend on feed material and contamination; the ECON04’s durable M2 1.3343 DMo5 composition is selected to extend edge life and reduce unplanned replacements in typical recycling workloads. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We provide an economical alternative to original manufacturer parts with our MetavCUT brand: our process-optimised wear parts are precisely matched, long-lasting and specifically developed for productive use.
40 x 20 x 1.65 x 35D Granulator Knife, M2 1.3343 DMo5 - MetavCUT
Take advantage of robust M2 (1.3343 DMo5) tool steel, precision-ground geometry and compatibility with ECON granulators to maintain consistent pellet quality and low downtime. Order the ECON04 granulator and shredder blade directly via Metav Werkzeuge or ask our consultants if needed. ECON04 Granulator and Shredder Knife — 40 x 20 x 1.65 x 35D, M2 (1.3343 DMo5) — MetavCUT A ECON04 granulator and crusher blade for ECON recycling machinery, engineered to deliver uniform cutting performance in shredders and pelletising systems. M2 tool steel (1.3343 DMo5) for long wear Precision ground 40 x 20 x 1.65 x 35D profile Designed for ECON granulators and shredders Consistent output and improved process efficiency High-process environments demand consistent particle size and reliable throughput. The blade’s M2 tool steel composition combines hardness with toughness to preserve a sharp cutting edge, which results in more uniform pellets and reduced regrind. Fewer fines and lower dust levels contribute to cleaner downstream processing and less load on filtration and conveying systems. By prioritising repeatable geometry, the component supports stable production rates and helps keep cycle times predictable. Durable construction that reduces maintenance intervals Built from grade 1.3343 (DMo5) high-speed steel, the cutting element resists abrasive wear while tolerating the mechanical stresses common in recycling applications. Precision grinding of the profile ensures an even contact line during cutting, reducing localised wear and the need for frequent reshaping. These material and manufacturing choices translate into longer service intervals, fewer planned stops and lower total cost of ownership for the system operator. Purpose-designed for compatibility and simple replacement The knife is supplied in the exact 40 x 20 x 1.65 x 35D configuration specified for many ECON systems, allowing for straightforward interchange during maintenance. The geometry is optimised for both shredding of bulky scrap and granulation of extruded strands, so a single blade design serves multiple machine stages. Clear, standardised dimensions simplify inventory management and enable reliable fitment without trial adjustments. For supply, technical matching or tailored advice on MetavCUT wear parts, contact Metav Werkzeuge for expert guidance and fast delivery from Emmerich. Technical data Article number: ECON-ECON04-40x20x1.65x35D-M2-13343-DMo5 Product name: Granulator and shredder knife ECON04 Brand: MetavCUT Core specifications Dimensions: 40 x 20 x 1.65 x 35D Material grade: M2 (1.3343 DMo5) Features & application Intended for shredders, granulators and pelletising systems Compatible with ECON recycling and granulation machines Precision-ground cutting geometry for consistent pellet quality Wear-resistant high-speed steel for extended service life FAQ What materials can this blade process effectively? The ECON04 blade, made from M2 (1.3343 DMo5), is designed to process typical recycling materials in shredders and granulators, delivering consistent cutting performance for plastics, films and common thermoplastic scrap. How does the material grade affect blade life? Using high-speed steel like M2 improves wear resistance and retains a sharper edge under heavy load; this means the ECON04 granulator knife achieves longer service intervals compared with softer steels. Is the blade a direct replacement for ECON machines? Yes, the ECON04 blade is manufactured to the specified 40 x 20 x 1.65 x 35D profile and is intended for direct fitment in compatible ECON shredders and granulators. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40 x 20 x 1.65 x 35D Granulator/Shredder Knife, 1.3207 EW9Co10 Wear-Resistant - MetavCUT
Benefit from durable, wear-resistant cutting edges, precise dimensions and a design matched to ECON recycling systems for consistent pellet quality and longer production runs. Order supply directly via Metav Werkzeuge or request tailored advice from our consultants. ECON04 granulator knife (MetavCUT) – 1.3207 EW9Co10, 40 x 20 x 1.65 x 35D ECON04 is a replacement granulator and shredder blade designed for reliable reduction of plastic waste and regranulation in ECON recycling equipment. Wear-resistant EW9Co10 steel Precise 40 x 20 x 1.65 profile Designed for ECON recycling systems Sharp edge for consistent pellet quality Consistent cutting quality for continuous operation The ECON04 is engineered to maintain a sharp edge under continuous load, giving a uniform cut that supports steady downstream processing. Made to the quoted dimensions, the blade’s exact profile reduces vibration and irregular wear in granulators and shredders, which in turn lowers the risk of unexpected stoppages. The combination of precise geometry and robust material selection contributes to reliable production flow and helps sustain throughput targets in high-demand recycling lines. Faster maintenance cycles through precise fit A close-fitting knife reduces set-up time and simplifies replacement in routine maintenance windows. The specified dimensions ensure a precise fit in ECON machines, which minimises mechanical play and the need for repeated adjustments. When blades sit cleanly in their carriers, strain on bearings and shafts is reduced, delivering a measurable effect on service intervals and spare-part logistics. This design focus translates into less downtime and more predictable maintenance planning. Adapted for a wide range of plastic processing tasks Granulating and shredding tasks such as cutting film, sprues, tubes, sheets or bulky waste demand consistent results to avoid quality loss in regrind. The knife’s geometry supports even particle size, which improves melt behaviour and screening efficiency in subsequent processing stages. By reducing fines and dust generation, the blade helps maintain a cleaner working environment and stabilises material handling, benefiting both product quality and operator comfort in recycling operations. Material designation and role in wear performance The blade is supplied in the specified grade 1.3207 EW9Co10, a tool-steel designation used for wear-critical cutting components. This material choice is intended to balance edge retention with toughness for cyclic loads encountered in granulators and shredders. Correct selection and mounting of the knife are central to achieving the anticipated service life; regular inspection and professional reconditioning keep cutting performance consistent and limit scrap rates. For durable performance in recycling lines, choose the MetavCUT ECON04 with 1.3207 EW9Co10 and contact Metav Werkzeuge for tailored supply and technical advice by phone or email Technical Data Article number: ECON-ECON04-40x20x1.65x35D-13207-EW9Co10 Product name: Zerkleinerungsmesser / Granuliermesser 40 x 20 x 1.65 x 35D ECON04 für ECON Maschinen aus 1,3207 EW9Co10 Brand: MetavCUT Facts Dimensions: 40 x 20 x 1.65 x 35D Special features Material: 1.3207 EW9Co10 Application: recycling, shredding, granulation Suitable for ECON recycling, shredders and pelletiser systems FAQ What machines is this blade compatible with? The ECON04 granulator knife is specified for use in ECON recycling, shredding and pelletising systems and fits the original mounting profile for those machines. How does the material 1.3207 EW9Co10 affect service life? The designation 1.3207 EW9Co10 identifies the tool steel chosen for wear-critical cutting parts; in the ECON04 it supports sustained edge retention under typical granulator loads. Can this blade improve pellet consistency? Yes, the ECON04’s precise geometry and sharp cutting edge promote uniform particle size, which helps achieve more consistent pellets and smoother downstream extrusion or compounding. What items are typically processed with this knife? The knife is intended for processing plastic waste such as film, sprues, tubes, plates and other common feedstock in recycling and granulation lines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten dir mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt.
40 x 20 x 2.8 x 35D Granulator/Chipper Knife, High-Speed Steel EW9Co10, For ECON Machines - MetavCUT
Take advantage of the wear-resistant 1.3207 EW9Co10 alloy and the precise 40 x 20 x 2.8 x 35D geometry to maintain steady granulate quality and reduce downtime; order the blade directly via Metav Werkzeuge or consult their specialists for supply and technical advice. ECON03 Granulator and Shredder Knife – 1.3207 EW9Co10, 40 x 20 x 2.8 x 35D (MetavCUT) ECON03 is a granulator and shredding blade engineered for ECON recycling equipment, designed to produce uniform pellets and reliable throughput in continuous operation Wear-resistant 1.3207 EW9Co10 steel Precise 40 x 20 x 2.8 x 35D dimensions Direct fit for ECON recycling machines Sharp cutting edge for consistent pellets Reliable cutting performance that prolongs run times Manufactured from 1.3207 EW9Co10, a cobalt-enriched tool steel, this granulator blade delivers high wear resistance and sustained edge retention under abrasive conditions. The material choice reduces frequency of blade changes in heavy-duty recycling, which directly supports higher machine availability. In shredders and granulators that process films, pipes or sprues, the result is a consistent material flow and lower fines generation, improving downstream handling and reducing rework. Exact dimensions and fit that reduce setup time The 40 x 20 x 2.8 x 35D specification ensures an accurate mechanical match with ECON machines, enabling straightforward installation and precise blade seating. A correct fit minimises vibration and uneven loads, which preserves bearing life and lowers the risk of imbalance-related faults. This dimensional stability translates into predictable maintenance cycles and faster changeovers, so operational planning becomes more reliable and less labour-intensive. Consistent pellet quality for efficient reprocessing A sharp, precision-ground cutting geometry supports uniform granulate size and reduces dust formation during size reduction, which benefits both product quality and environmental hygiene in the plant. Consistent particle shape simplifies downstream extrusion and regranulation steps, contributing to measurable operational efficiency and material yield improvements. By using a purpose-made replacement blade, process stability is preserved and the overall cost of production per kilo of recycled material is optimised. For durable, process-optimised wear parts from MetavCUT, contact Metav Werkzeuge in Emmerich for tailored supply and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: ECON-ECON03-40x20x2.8x35D-13207-EW9Co10 Name: Zerkleinerungsmesser / Granuliermesser 40 x 20 x 2.8 x 35D ECON03 Facts Material: 1.3207 EW9Co10 Dimensions: 40 x 20 x 2.8 x 35D SKU: ECON-ECON03-40x20x2.8x35D-13207-EW9Co10 Special features Suitable for ECON recycling, shredding and pelletising equipment Brand: MetavCUT Part designation: ECON03 FAQ What applications is this blade designed for? This granulator and shredder knife is intended for use in recycling lines and pelletising systems; the ECON03 from MetavCUT is suitable for processing plastic waste, sprues, films, pipes and plates in ECON machines. How does the material 1.3207 EW9Co10 benefit performance? The 1.3207 EW9Co10 alloy provides enhanced wear resistance and edge stability, so the ECON03 maintains cutting performance longer and supports reduced changeover frequency. Is the ECON03 compatible with all ECON machines? The knife is manufactured to the 40 x 20 x 2.8 x 35D specification for direct fit in designated ECON shredders and granulators; compatibility depends on matching the machine’s blade holder dimensions. What operational advantages can be expected after replacement? Fitting a correctly specified replacement blade improves pellet uniformity and reduces dust, which in turn lowers downstream processing effort and helps to maintain steady throughput. How does blade precision affect equipment life? A precise blade seating reduces imbalance and vibration, which protects bearings and other drivetrain components; the ECON03’s dimensional accuracy supports longer service intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer with our MetavCUT brand an economical alternative to original manufacturer parts: our process‑optimised wear parts are precisely fitting, durable and developed specifically for productive industrial use.
40 x 20 x 2.8 x 35D Granulator/Size-Reduction Knife, M2 (1.3343 DMo5) - MetavCUT
Reliable cutting performance and long service life from M2 high-speed steel, combined with precise dimensions for direct fit on ECON machines. Order the ECON03 directly via Metav Werkzeuge or ask our consultants if needed. ECON03 granulator and shredding knife — M2 high-speed steel, 40 x 20 x 2.8 x 35D The ECON03 is a granulator and shredding knife designed for ECON recycling and pelletising machines, engineered to deliver consistent cutting performance for a wide range of plastic waste and reprocessing tasks. M2 (1.3343 DMo5) high-speed steel construction Precision ground edges for consistent pellet size Compatible with ECON recycling and granulators Low dust generation and improved throughput Consistent pellet quality through optimised cutting geometry The ECON03 is manufactured from M2 high-speed steel (1.3343 DMo5), a material chosen for its balance of hardness and toughness. This composition supports stable cutting edges that preserve geometry under cyclic loads, resulting in consistent pellet size and fewer fines. For recycling and granulating processes, this translates into more uniform regranulate, reduced downstream filtration effort and improved process stability. The knife’s ground profile is designed to reduce friction and control chip formation, which helps maintain throughput without sacrificing cut quality. Reduced downtime and longer maintenance intervals Precision finishing and the inherent wear resistance of the steel minimise rapid edge degradation, allowing longer service intervals and fewer unscheduled stops. The accurate manufacturing tolerances ensure a secure fit in the knife holder, which reduces vibration and wear on adjacent components. Lower dust generation means less load on extraction and screening systems, contributing to a cleaner production environment and reduced maintenance on ancillary equipment. Taken together, these factors improve overall equipment effectiveness and support a more predictable maintenance schedule. Direct fit for ECON systems and reliable supply chain backing With dimensions 40 x 20 x 2.8 x 35D, the knife is configured for direct replacement in compatible ECON shredders, granulators and pelletisers, providing a straightforward swap without custom machining. The design focus on repeatable geometry ensures even contact pressure across the blade, preserving both cut quality and machine life. Metav’s quality filter in Emmerich underpins product reliability for industrial applications, combining workshop practicality with industrial supply security — an economical wear-part solution developed for continuous production. Our MetavCUT range offers a targeted alternative to original parts while maintaining fit and function. Contact Metav Werkzeuge for MetavCUT ECON03 replacements and ensure uninterrupted production—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ECON-ECON03-40x20x2.8x35D-M2-13343-DMo5 Item name: Zerkleinerungsmesser / Granuliermesser ECON03 Material: M2 1.3343 DMo5 Brand: MetavCUT Facts Dimensions: 40 x 20 x 2.8 x 35D UID: ECON-ECON03-40x20x2.8x35D-M2-13343-DMo5 Special features Suitable for ECON recycling and pelletising machines Application: shredding and granulating plastics Precision ground cutting edges Designed as a wear part for productive operation FAQ What material is used for this knife and why is it suitable? The ECON03 is made from M2 high-speed steel (1.3343 DMo5), chosen for a balance of hardness and toughness that preserves cutting geometry under continuous use and supports consistent pellet quality. Which machines is this knife compatible with? This granulator and shredding knife is compatible with ECON recycling, shredding and pelletising machines and is supplied in a standard format for direct replacement. What are the exact dimensions and how do they affect fit? Dimensions are 40 x 20 x 2.8 x 35D; these measurements ensure accurate seating in the knife holder and maintain correct clearance for stable cutting and minimal vibration. How does this knife influence dust generation and downstream processing? The precision-ground edges of the ECON03 produce fewer fines, reducing dust generation and easing the load on extraction and screening systems, which benefits downstream processing and filtration. Is the MetavCUT knife a direct alternative to original equipment parts? MetavCUT knives like the ECON03 are engineered as economical, process-optimised wear parts that match form, fit and function for productive use while offering a cost-efficient alternative to some manufacturer-original components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 1.6 x 40D Granulator/Chipper Knife M2 1.3343 DMo5 - MetavCUT
Take advantage of precise M2 (1.3343 / DMo5) high‑speed steel, exact 40 x 25 x 1.6 x 40D dimensions and a design optimised for continuous operation to keep production steady and pellet quality consistent. Order replacements or discuss suitability directly with Metav Werkzeuge for a reliable supply chain solution. Shredder and granulator cutter 40 x 25 x 1.6 x 40D — MetavCUT M2 HSS blade The shredder and granulator cutter 40 x 25 x 1.6 x 40D is a replacement cutting blade designed for ECON recycling and granulating equipment, providing a precision fit and durable cutting performance in industrial recycling applications. M2 high‑speed steel construction Exact 40 x 25 x 1.6 x 40D dimensions Sharp edge for uniform pellets Compatible with ECON recycling machinery Consistent pellet quality through precision materials Made from M2 (1.3343 / DMo5) high‑speed steel, this cutter combines hardness and toughness to deliver a consistently sharp cutting edge. The material selection reduces micro‑fracture and wear during high‑speed cutting, which in turn supports uniform pellet sizes and reduced dust generation. For operators of granulators and shredders, this translates into fewer rejects and less downstream screening, improving overall process efficiency. Exact dimensions for fast installation and reliable running The specified 40 x 25 x 1.6 x 40D geometry ensures a precise mechanical fit in compatible ECON machines, eliminating the need for on‑site modification. A correct fit maintains blade alignment and cutting geometry, which helps keep the rotor balance and reduces vibration. Faster changeovers and consistent alignment directly support higher machine availability and predictable maintenance intervals. Designed for demanding recycling workflows Blades used in shredders and granulators face a mix of materials and operating stresses; this cutter is engineered for that environment. Its geometry and edge preparation are aimed at processing plastics, film remnants and sprues with minimal smearing and clogging. The result is steady throughput and a clean cut surface that eases downstream handling and reduces energy consumption per tonne processed. Serviceable design that supports cost efficiency The hardness and grindability of M2 allow for multiple re‑sharpening cycles where appropriate, extending the useful life compared with coated low‑grade steels. By enabling controlled reconditioning, the cutter offers a cost‑effective balance between initial blade performance and long‑term tool economy. For budget‑conscious operations, this combination of performance and serviceability lowers total cost of ownership across production runs. Application focus and operational benefits Intended for use in ECON recycling, shredding and pelletising systems, the blade contributes directly to product consistency and plant reliability. Sharp, correctly dimensioned knives improve cut geometry, reduce fines and help maintain melt quality in granulation lines. Choosing a blade with industrial specification promotes safer operation and predictable maintenance planning, aligning with lean production goals. Contact Metav Werkzeuge for a tailored replacement blade and technical guidance for ECON machines; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility, delivery and reconditioning options Technical data Article number: ECON--40x25x1.6x40D-M2-13343-DMo5 Description: Shredder and granulator cutter 40 x 25 x 1.6 x 40D for ECON machines Material: M2 (1.3343 / DMo5) high‑speed steel Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 1.6 x 40D Special features Application: Recycling, shredding and granulating of plastics Compatibility: Designed for ECON recycling and pelletising equipment Wear characteristics: Hardened high‑speed steel for extended service life FAQ What materials is this cutter intended for? The cutter is specified for use in recycling and granulating workflows processing various plastics; the MetavCUT shredder and granulator cutter (SKU ECON--40x25x1.6x40D-M2-13343-DMo5) is engineered to handle film, sprues and general plastic offcuts. Is this blade compatible with all ECON machines? Compatibility is intended for ECON recycling and granulating machines that accept the 40 x 25 x 1.6 x 40D geometry; confirm machine specifications before installation. Can the blade be re‑sharpened? Yes. The M2 (1.3343 / DMo5) high‑speed steel composition permits controlled re‑sharpening to extend blade life while maintaining cutting performance. How does the blade affect pellet quality? A sharp, precisely ground edge contributes to uniform pellet dimensions and reduced dust, improving downstream processing and product consistency. Which part identifier should be used when ordering replacements? Use the SKU ECON--40x25x1.6x40D-M2-13343-DMo5 and specify MetavCUT as the brand to ensure the correct replacement item is supplied. Manufacturer / Responsible: MetavCUT / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Wir bieten mit unserer Marke MetavCUT eine wirtschaftliche Alternative zu Hersteller‑Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz ausgelegt.
40 x 25 x 1.6 x 40D Granulator/Shredder Knife, 1.3207 EW9Co10 - MetavCUT
Taking advantage of wear-resistant 1.3207 EW9Co10 and an exact 40 x 25 x 1.6 x 40D profile, this blade delivers consistent particle size and reduced dust generation for continuous operation; order MetavCUT replacement knives via Metav Werkzeuge or consult the technical team for machine-specific advice. Shredder/Granulator Blade 40 x 25 x 1.6 x 40D – 1.3207 EW9Co10 (for ECON machines) by MetavCUT A Shredder/Granulator Blade 40 x 25 x 1.6 x 40D engineered to reduce plastics to processable sizes in ECON recycling and pelletising equipment *Made from 1.3207 EW9Co10 wear-resistant steel *Dimensions 40 x 25 x 1.6 x 40D for direct fit *Designed for shredders and granulators *Precision fit for ECON recycling systems High-performance wear characteristics prolong run times Manufactured from 1.3207 EW9Co10, this blade offers a balance of toughness and abrasion resistance that supports longer intervals between replacements. In continuous recycling lines, reduced wear translates into fewer stoppages and steadier production rates. The material choice contributes to predictable service life and consistent cutting behaviour, which in turn helps maintain throughput and lowers total lifecycle intervention. Exact fit reduces setup time and mechanical stress The 40 x 25 x 1.6 x 40D profile is produced to match ECON equipment tolerances, ensuring a precision fit that minimises play and vibration during operation. Reduced mechanical stress on the knife holder and rotor increases the reliability of the entire cutting assembly. A close-fitting blade also supports uniform contact across the cutting edge, improving cut quality and reducing the risk of premature component failure. Improved product quality through controlled cutting Sharp, well-matched knives deliver a consistent particle size, which eases downstream handling and reprocessing. The blade geometry and hard-wearing steel help to limit fines and dust generation, resulting in cleaner material streams and less loss of material value. These effects are particularly relevant in shredders and granulators where downstream filters and conveyors benefit from a more uniform feed. Application focus and operational advantages in recycling lines Intended for use in shredders, cutting mills and granulators on ECON machines, the blade supports both primary size reduction and post-extrusion pelletising tasks. Its design emphasises stable, repeatable cuts under industrial loads, enabling steady plant performance. Where frequent changeovers are required, the compatibility and predictable behaviour of this component simplify inventory planning and maintenance scheduling. Contact Metav Werkzeuge for tailored specification support and to secure MetavCUT replacement blades matched to ECON machines; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ECON--40x25x1.6x40D-13207-EW9Co10 Article designation: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 1.6 x 40D für ECON Maschinen aus 1,3207 EW9Co10 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 40 x 25 x 1.6 x 40D Facts Dimensions: 40 x 25 x 1.6 x 40D Material grade: 1.3207 EW9Co10 SKU: ECON--40x25x1.6x40D-13207-EW9Co10 Special features Suitable for ECON recycling, shredding or pelletising systems Intended for shredders, cutting mills and granulators Designed to deliver consistent particle size and low dust Process-optimised wear part for industrial recycling applications FAQ What materials can this blade process? The blade is specified for general recycling use in shredders and granulators; the MetavCUT shredder/granulator blade (ECON--40x25x1.6x40D-13207-EW9Co10) is used primarily on plastic waste, sprues, films and similar polymeric feedstocks in ECON equipment. How does the material 1.3207 EW9Co10 benefit cutting performance? The 1.3207 EW9Co10 steel offers a combination of abrasion resistance and toughness that keeps the cutting edge functional for longer periods, so the MetavCUT blade maintains cutting quality under continuous industrial operation. Is this blade a direct replacement for ECON originals? The item is dimensioned for direct fit in ECON shredders and granulators; its 40 x 25 x 1.6 x 40D profile is intended to match the corresponding machine holders and mounting geometry. What operational improvements can be expected after installation? Installation of a correctly matched blade reduces vibration and uneven wear, promoting consistent particle size, less dust and more reliable plant throughput when used in the appropriate ECON system. Can the blade be resharpened or must it be replaced? Resharpening depends on wear pattern and service economics; the MetavCUT blade is produced as a process‑optimised wear part, and replacement is often the most efficient option in high‑throughput recycling operations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer an economical alternative to original manufacturer parts with our MetavCUT brand: our process‑optimised wear parts are precisely matched, durable and specifically developed for productive use.
40 x 25 x 1.65 x 35D Granulator/Shredder Knife, EW9Co10 High-Alloy Steel - MetavCUT
Take advantage of a wear-resistant design and precise dimensions to secure consistent cutting performance and reliable pellet quality; the combination of 1.3207 EW9Co10 steel and the 40 x 25 x 1.65 x 35D profile supports stable operation in ECON systems. Order supply or consult Metav Werkzeuge for application advice and supply chain continuity. MetavCUT Shredding / Pelletising Knife 40 x 25 x 1.65 x 35D – 1.3207 EW9Co10 The MetavCUT Shredding / Pelletising Knife 40 x 25 x 1.65 x 35D is a wear part engineered for recycling and granulation duties in ECON recycling, shredding and pelletising machines. Precision-ground 1.3207 EW9Co10 material Compatible with ECON recycling systems Optimised for low dust and uniform pellets Consistent cut quality that improves downstream processing The blade profile 40 x 25 x 1.65 x 35D and the chosen 1.3207 EW9Co10 material deliver a defined cutting edge that promotes uniform pellets and reduced fines during granulation. In shredding and pelletising applications, a consistent edge geometry lowers the proportion of dust and fines, which in turn reduces the need for additional sieving or rework. This translates into more predictable throughput and a steadier end-product quality for recycling or regranulate production. Built for reliable integration with ECON equipment Designed specifically for use in ECON machines, the knife matches the typical holder geometries and mounting requirements used across shredders and granulators from this manufacturer. The compatibility focus reduces installation time and simplifies spare-part logistics. By aligning blade geometry with machine tolerances, operational stability is improved and the risk of uneven wear or premature edge failure is minimised, supporting continuous production cycles. Material choice and wear behaviour explained Manufactured from 1.3207 EW9Co10, the component is specified as a wear part for abrasive and repetitive cutting tasks commonly encountered in recycling plants. The steel grade provides the hardness and toughness balance needed to withstand contact with varied plastic scrap such as sprues, films, pipes and plates. Because the material selection targets durability, the blade sustains cutting performance over longer service intervals while maintaining a predictable wear pattern that facilitates planned maintenance. Practical benefits: maintenance, process efficiency and uptime Using a process-optimised knife reduces unplanned stops and eases maintenance planning. The precise edge geometry contributes to steady feed behaviour and lowers mechanical stress on the granulator shaft and counter-rotating knives. Fewer fines and more regular pellet size improve downstream handling and extrusion efficiency, which can cut reprocessing steps and conserve energy. As a replaceable wear item, the blade supports quick changeovers and keeps overall production interruptions to a minimum. For process-stable granulation with MetavCUT precision, contact Metav Werkzeuge for tailored advice and supply from Emmerich: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: ECON--40x25x1.65x35D-13207-EW9Co10 Article name: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 1.65 x 35D for ECON machines made from 1.3207 EW9Co10 Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 1.65 x 35D Material grade: 1.3207 EW9Co10 UID: ECON--40x25x1.65x35D-13207-EW9Co10 Special features Application: shredders, granulators and pelletisers Compatible with ECON recycling, shredding and pelletising machines Purpose: reduce plastic waste to processable size and produce uniform pellets Intended as a replaceable wear part in industrial recycling lines FAQ Which machines is this knife compatible with? The blade is specified for use in ECON recycling, shredding and pelletising machines and is designed to match common holder geometries used by that manufacturer. What material is the knife made from and why? The knife is manufactured from 1.3207 EW9Co10, selected to provide the balance of wear resistance and toughness required for repeated cutting of plastic scrap. Which types of plastic can be processed with this blade? The knife is suitable for a wide range of plastic waste such as sprues, films, pipes and plates, supporting both shredding and subsequent granulation tasks. How does the blade influence pellet quality and dust generation? A precise edge and correct profile help produce uniform pellets and reduce fines, which decreases dust generation and improves downstream handling and extrusion performance. Is this a direct replacement part for ECON granulators? The component has been produced to fit ECON systems; compatibility with specific models should be checked against machine holder details and the listed profile dimensions. Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com We offer with our MetavCUT brand a cost-effective alternative to original manufacturer parts: our process-optimised wear parts are precisely matched, long-lasting and developed for productive industrial use.
40 x 25 x 1.65 x 35D Shredder/Granulator Knife M2 (1.3343 / DMo5) - MetavCUT
Benefitting from durable M2 (1.3343 / DMo5) high‑speed steel, exact 40 x 25 x 1.65 x 35D dimensions and direct compatibility with ECON recycling equipment, this blade delivers consistent cutting performance and longer service intervals. Order the blade directly via Metav Werkzeuge or ask our consultants if needed. Shredder / Granulator Blade 40 x 25 x 1.65 x 35D (M2 1.3343 DMo5) by MetavCUT A robust Shredder and Granulator Blade designed for ECON recycling and granulation machines, providing precise cutting geometry and extended wear life for continuous industrial processing. Solid M2 high‑speed steel construction Exact 40 x 25 x 1.65 x 35D dimensions Compatible with ECON recycling machines High wear resistance for continuous operation Engineered for consistent, clean cuts The blade is manufactured from M2 (1.3343, DMo5), a high‑speed steel grade chosen for its balance of hardness and toughness. This material selection yields a sharp edge that is retained under cyclic loads, resulting in consistent pellet size or shred quality and reduced rework. By focusing on cutting geometry and edge preparation, the component minimises jagged breaks and uneven fragments, which in turn lowers downstream screening effort and improves secondary processing efficiency. Precision fit that reduces machine downtime With exact 40 x 25 x 1.65 x 35D dimensions, the cutting part is produced to tight tolerances so that replacement is straightforward and repeatable. A precise fit to ECON machines ensures alignment of the cutting gap and blade seating, which reduces vibration and uneven wear. The result is faster service routines, fewer alignment adjustments and less unplanned stoppage — clear operational advantages for continuous recycling lines and pelletising processes. Material and wear characteristics that extend service intervals The choice of M2 HSS, combined with heat treatment and surface finishing, is aimed at abrasion resistance and edge stability during high‑throughput operation. Such properties enable the blade to handle a range of feedstocks — from films and sprues to thicker pipes and plates — without rapid blunting. Reduced wear rate means fewer blade changes and lower inventory turnover for wear parts, supporting a predictable maintenance schedule and steady production output. Suited applications and process benefits Designed for use in shredders, cutting mills and granulators, this blade performs where consistent size reduction is required prior to extrusion or recycling. In granulation tasks the geometry supports clean strand cutting for uniform pellet formation, while in shredding applications the component helps limit dust generation and fines. As a process‑optimised wear part, it contributes to improved product quality, lower waste rates and reliable machine availability on busy shop floors. For process‑optimised wear parts from MetavCUT and advice on integrating this blade into ECON equipment, contact Metav Werkzeuge—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery options Technical data SKU: ECON--40x25x1.65x35D-M2-13343-DMo5 Material: M2 1.3343 DMo5 Dimensions: 40 x 25 x 1.65 x 35D Brand: MetavCUT Suitable for: Recycling, shredding and pelletising equipment from ECON Facts Dimension specification: 40 x 25 x 1.65 x 35D Steel grade: M2 (1.3343 / DMo5) Special features Compatibility with ECON recycling and granulator machines Application: shredders, cutting mills, granulators Process‑optimised wear part for industrial use Designed for reduced dust and consistent pellet output FAQ What material is the blade made from and why is it used? The blade is produced from M2 (1.3343, DMo5) high‑speed steel; this grade provides a durable cutting edge and wear resistance suited to repeated size reduction in recycling and granulation. Is this blade compatible with ECON machines? Yes, the blade is specified for use in ECON recycling, shredding and pelletising equipment and is produced to match the required seating and cutting gap dimensions. How do the dimensions affect performance? Exact dimensions (40 x 25 x 1.65 x 35D) ensure correct blade alignment and cutting geometry, which reduces vibration, improves cut quality and extends service intervals for the machine. Can this blade handle different types of plastic feedstock? The blade’s material and geometry are suited to a wide range of plastics including films, sprues and thicker sections, enabling reliable shredding or granulation with reduced fines. Is the blade supplied ready for installation or does it require further machining? The component is delivered machined to the specified tolerances and prepared for installation in compatible ECON equipment; final installation checks should follow machine manufacturer guidelines. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com With the MetavCUT brand, a cost‑effective alternative to original manufacturer parts is offered: process‑optimised wear parts that are precisely fitting, long‑lasting and expressly developed for productive industrial use.
40 x 25 x 1.65 x 35D Shredder/Granulator Knife M35 HSS-Co, For Recycling Machines - MetavCUT
Take advantage of a wear-resistant M35 HSS‑Co cutting geometry and precise 40 x 25 x 1.65 x 35D sizing for reliable performance in recycling lines; the result is consistent pellet quality and reduced machine downtime. Order replacement knives via Metav Werkzeuge for assured delivery and technical advice, or consult our specialists for installation and compatibility guidance. MetavCUT Granulator Knife 40 x 25 x 1.65 x 35D (M35 HSS‑Co) – Granulator / Shredder Blade The MetavCUT Granulator Knife 40 x 25 x 1.65 x 35D is a precision replacement blade designed for ECON granulators and shredders, optimised for industrial recycling and pelletising of plastic waste. M35 HSS‑Co high wear resistance Precisely ground cutting edge Compatible with ECON machines Consistent pellets with reduced dust Robust material for continuous production gains Made from M35 HSS‑Co, this blade delivers high wear resistance and a predictable tool life in abrasive recycling environments. The alloyed high-speed steel contains cobalt to retain hardness at elevated temperatures, which helps to maintain a sharp cutting edge under prolonged load. The material choice translates into fewer changeovers and less unscheduled downtime, improving the productivity of shredders and granulators in continuous operation. Precise geometry for uniform regranulate The specified dimensions 40 x 25 x 1.65 x 35D and factory-ground tolerances ensure an accurate fit and consistent clearance when mounted in ECON machines. A stable geometry promotes even shearing of film, pipes, sprues and plates, producing consistent pellets and reducing fines and dust. Lower dust generation benefits downstream filtration and reduces material loss, contributing to better yield and easier handling of reprocessed material. Application-focused design that reduces total cost of ownership These knives are engineered for use in shredders, cutting mills and extrusion granulators where a reliable cutting performance is essential. The combination of a hard-wearing substrate and precise edge preparation improves cut quality and reduces the frequency of regrinds. In practice, this leads to a lower total cost of ownership through extended service intervals and fewer production interruptions, while maintaining the quality required for regranulate resale or reuse. Installation, maintenance and compatibility notes The blade is supplied to match the ECON mounting pattern and nominal thickness for immediate interchangeability. Correct installation and torque settings are important to preserve blade life and machine safety; protective covers and secure fastenings are recommended. When integrated into a granulation line, a properly aligned knife set contributes to even strand cutting and homogenous pellet size, which simplifies downstream sieving and drying operations. Mit unserer Marke MetavCUT bieten wir eine wirtschaftliche Alternative zu Hersteller‑Originalteilen: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. For tailored advice on MetavCUT granulator knives in M35 HSS‑Co, contact Metav Werkzeuge in Emmerich for a quotation and technical guidance Technical data Article number: ECON--40x25x1.65x35D-M35-HSS-Co Label: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 1.65 x 35D für ECON Maschinen aus M35 - HSS-Co Manufacturer: MetavCUT Material: M35 - HSS‑Co Dimensions: 40 x 25 x 1.65 x 35D Core dimensions Nominal dimensions: 40 x 25 x 1.65 x 35D Applications & special features For ECON granulators and shredders Designed for shredding and granulating plastics (films, pipes, sprues, plates) High wear resistance via M35 HSS‑Co construction Factory-ground cutting edge for consistent pellet quality FAQ What materials can this blade process effectively? The MetavCUT granulator knife is manufactured from M35 HSS‑Co and is suitable for processing a wide range of plastic waste such as films, pipes and sprues in shredders and granulators. Is the knife compatible with ECON machines? Yes, the blade is dimensioned and drilled to match the mounting pattern specified for ECON granulators and shredders; refer to the article number ECON--40x25x1.65x35D‑M35‑HSS‑Co for ordering. How does the M35 HSS‑Co alloy improve performance? The cobalt-alloyed high-speed steel in this blade retains hardness at higher temperatures, which helps maintain a sharp cutting edge and extend service intervals in continuous recycling operations. Can the blade be re-sharpened or reconditioned? The MetavCUT cutting geometry permits regrinding where appropriate; reconditioning should follow original tolerances to preserve pellet quality and fitment in the machine. What operational benefits should be expected after switching to this knife? Using this granulator blade typically leads to more uniform pellets, reduced dust generation and fewer blade changes, supporting steadier production and improved material yield. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 35D Granulator Cutter, M2 1.3343 DMo5, For ECON Machines - MetavCUT
Take advantage of the combination of durable high‑speed steel, precise edge geometry and straightforward compatibility with ECON machines for stable production and reduced downtime. Order the required blade directly via Metav Werkzeuge or consult our specialists for configuration advice. Shredding knife / Granulator knife – 40 x 25 x 2.8 x 35D, M2 1.3343 DMo5 (MetavCUT) The Shredding knife / Granulator knife is a hardened cutting blade engineered for reducing plastic waste and producing consistent pellets in industrial recycling and granulation systems. M2 (1.3343 DMo5) high-speed steel construction Precision ground for consistent pellet size Designed for ECON shredders and granulators Higher throughput with consistent pellet quality The Shredding knife / Granulator knife delivers a measurable improvement in output uniformity thanks to its precision-ground cutting edge and optimised geometry. These characteristics reduce fines and fragment variation, resulting in consistent pellet quality and smoother downstream processing. For operators focused on throughput and material yield, the blade’s geometry translates directly into fewer rejects and less machinery cleaning between batches. Built for longevity in heavy-duty recycling Manufactured from M2 1.3343 DMo5, a recognised high-speed steel grade, the component combines hardness and toughness for extended service life under continuous operation. The choice of this material boosts wear resistance at elevated temperatures encountered in intensive shredding and granulation. As a result, replacement intervals are extended and the frequency of spare orders is reduced, supporting reliable machine availability during long production runs. Straightforward fitment that keeps lines moving Intended as a direct replacement for ECON recycling equipment, the blade’s form factor and mounting dimensions enable efficient swap‑outs with minimal machine downtime. The design supports quick re‑installation and alignment, helping to restore cutting performance rapidly after replacement. Clear compatibility reduces planning effort for maintenance cycles, so conveyor and extrusion lines can return to full operation with confidence. MetavCUT: process‑optimised wear parts for productive use Through the MetavCUT brand, a cost‑effective alternative to original manufacturer parts is provided: process‑optimised wear components are engineered to match OEM fits, extend operational life and withstand the demands of continuous industrial recycling. These parts are produced with an emphasis on precision, repeatability and productive durability to support efficient plant operation. Contact Metav Werkzeuge for tailored supply of MetavCUT wear blades or request technical configuration support from our consultants in Emmerich. Technical data Article number: ECON--40x25x2.8x35D-M2-13343-DMo5 Designation: Shredding knife / Granulator knife 40 x 25 x 2.8 x 35D Manufacturer: MetavCUT Core specifications Dimensions: 40 x 25 x 2.8 x 35D Material grade: M2 1.3343 DMo5 Applications & features Suitable for ECON recycling, shredding and pelletising machines Intended use: cutting plastic waste, sprues, films, pipes, plates Function: wear part for granulators and shredders, precision ground edge Benefit: reduced dust and improved pellet consistency FAQ What materials can this blade process? The Shredding knife / Granulator knife from MetavCUT is designed for processing a wide range of plastics encountered in recycling, including films, pipes, plates and injection moulding sprues. How does the M2 1.3343 DMo5 material affect service life? M2 1.3343 DMo5 is a high‑speed steel chosen for its balance of hardness and toughness; the material selection for the MetavCUT blade supports enhanced wear resistance and longer service intervals under continuous operation. Is this blade compatible with all ECON granulators and shredders? The blade’s dimensions and mounting pattern are specified for ECON recycling and granulation machines; compatibility is indicated for ECON equipment and the blade is intended as a direct replacement wear part. Can the blade be resharpened or must it be replaced? The MetavCUT granulator blade is engineered for durable use; resurfacing is possible depending on wear pattern and local workshop capability, though replacement with a precision component is recommended to restore original cutting geometry. What operational benefits can be expected after fitting this blade? Fitting a precision, process‑optimised blade such as this improves pellet uniformity, reduces dust generation and helps maintain steady machine throughput, contributing to more efficient downstream processing. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 35D Granulator/Crusher Knife, 1.3207 EW9Co10 - MetavCUT
Take advantage of the combination of durable cobalt-alloyed high-speed steel, precise 40 x 25 x 2.8 x 35D dimensions and a design tailored for ECON recycling systems to ensure consistent pellet quality and reduced downtime. Order the Granulator knife 40 x 25 x 2.8 x 35D for ECON directly via Metav Werkzeuge or ask our consultants if needed. Granulator knife 40 x 25 x 2.8 x 35D for ECON machines — MetavCUT, 1.3207 EW9Co10 The Granulator knife 40 x 25 x 2.8 x 35D is a precision cutting blade engineered for use in ECON recycling and granulation machinery to produce uniform granulate from plastic waste streams. 1.3207 EW9Co10 cobalt-alloyed steel Precision ground cutting edges Compatible with ECON recycling machines Consistent granulate, reduced dust Durable material for prolonged cutting performance The blade is manufactured from 1.3207 EW9Co10, a cobalt-alloyed high-speed steel grade chosen for its enhanced wear resistance and thermal stability under demanding cutting conditions. This material selection reduces micro-chipping and edge wear when processing common feedstocks such as film, pipes or sprues, meaning fewer unscheduled stops for replacement. The use of a cobalt-alloyed substrate is particularly beneficial for continuous operation, where blade temperature can rise and conventional tool steels would lose hardness; the result is a more reliable production rhythm and lower overall tooling consumption. Precision dimensions that deliver consistent output With nominal dimensions of 40 x 25 x 2.8 x 35D, the cutting geometry is matched to the rotor and stator tolerances of ECON units, supporting even chip formation and uniform pellet size. Precision grinding of the cutting edge and controlled tolerances contribute to reduced dust generation and better downstream handling of material. For operators, this translates into improved product quality and reduced sorting or rework. The blade geometry also supports predictable cutting forces, which benefits motor load stability and can help extend the service life of other machine components. Engineered for straightforward maintenance and process efficiency The blade design focuses on interchangeability and a clean interface with standard ECON mounts, enabling quick replacement and minimal adjustment time. Sharp, accurately finished edges reduce friction and heat build-up during cutting, which lowers the risk of polymer melting and agglomeration at the knife face. This contributes to stable throughput and consistent granulate quality over longer production runs. As part of MetavCUT’s process-optimised wear parts, the knife is intended to contribute to lower lifetime costs through reduced frequency of replacement and predictable maintenance intervals. Wir bieten eine wirtschaftliche Alternative zu Hersteller-Originalteilen von MetavCUT: Unsere prozessoptimierten Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Discuss MetavCUT granulator knives with Metav Werkzeuge for fast, reliable supply from Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: ECON--40x25x2.8x35D-13207-EW9Co10 Name: Granulator knife / shredder blade 40 x 25 x 2.8 x 35D for ECON machines Brand: MetavCUT Facts Dimensions: 40 x 25 x 2.8 x 35D Special features Material: 1.3207 EW9Co10 Application: Recycling plants, shredding and pelletising systems for ECON equipment FAQ What materials can be processed with this blade? The MetavCUT granulator knife made from 1.3207 EW9Co10 is suitable for conventional plastic waste streams such as films, sprues, pipes and plates when used in ECON shredders and granulators. Is this knife compatible with standard ECON rotors and holders? Yes. The knife is specified to the 40 x 25 x 2.8 x 35D interface and is intended for direct fitment in ECON recycling and pelletising machines. How does the material choice affect blade life? The cobalt-alloyed 1.3207 EW9Co10 composition provides improved wear resistance and thermal stability, which helps maintain edge sharpness and extend operational life under continuous cutting loads. Can the blade be resharpened or is it a one-time component? Resharpening may be possible depending on wear pattern and remaining edge geometry; however, the blade is supplied as a process-optimised replacement part designed for reliable performance and predictable life cycles. MetavCUT — Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 40D Granulator/Shredder Cutter, M2 (1.3343/DMo5) - MetavCUT
High-performance M2 1.3343 DMo5 tool steel and exact 40 x 25 x 2.8 x 40D geometry deliver consistent pellet quality and low dust generation, while direct compatibility with ECON machines ensures fast replacement and reliable production. Order the granulator knife directly via Metav Werkzeuge or ask the consultants if needed. Granulator / Shredder Knife 40 x 25 x 2.8 x 40D by MetavCUT — M2 1.3343 DMo5, for ECON machines The Granulator / Shredder Knife 40 x 25 x 2.8 x 40D is a wear part for recycling and pelletising systems, designed to reduce plastic waste and to produce uniform granulate in ECON shredders and granulators Granulating and shredding geometry Hardened M2 1.3343 DMo5 steel Exact dimensions 40 x 25 x 2.8 x 40D Compatible with ECON recycling machines Consistent pellet quality through precise material and edge geometry The knife is manufactured from M2 1.3343 DMo5, a high-speed tool steel selected for its combination of hardness and toughness. This material choice supports a sharp, stable cutting edge that preserves shape under cyclic loads, resulting in consistent pellets and reduced fines. The designed cutting geometry promotes even material flow and cutting action, which directly improves downstream handling and reduces rejects. By focusing on metallurgical quality and edge form, operational variation is minimised and process stability is enhanced. Longer productive intervals and reliable wear behaviour Made as a dedicated wear part, the blade’s material properties translate into slower wear progression compared with lower-grade steels. This durability helps to extend service intervals and lowers unplanned downtime, supporting predictable maintenance cycles. For recycling operations where throughput and uptime are critical, such reliable wear behaviour reduces handling costs and the frequency of spare-part orders, contributing to a more economical production rhythm without sacrificing cutting performance. Accurate fit and reduced process emissions for ECON systems The knife’s dimensions 40 x 25 x 2.8 x 40D ensure a precise fit in ECON shredders and granulators, reducing vibration and minimising air-born dust during cutting. A well-matched blade seat helps maintain correct knife-to-knife clearance, which is essential for uniform granulate and low contamination. Intended applications include processing of plastic waste streams such as sprues, films, pipes and plates, where a clean cut reduces secondary operations and improves material quality for reuse or re-extrusion. MetavCUT — a practical alternative to original parts As a production-focused option, this replacement knife is engineered to meet the demands of high-volume recycling and pelletising. The combination of targeted material selection and dimensional accuracy delivers cost-efficient performance for everyday industrial use, while being straightforward to install and replace in standard ECON modules. Wir bieten eine wirtschaftliche Alternative zu Hersteller-Originalteilen: Mit MetavCUT prozessoptimierte Verschleißteile sind passgenau, langlebig und speziell für den produktiven Einsatz entwickelt. Contact Metav Werkzeuge for tailored replacement knives and supply from Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: ECON--40x25x2.8x40D-M2-13343-DMo5 Product name: Granulator / Shredder Knife 40 x 25 x 2.8 x 40D Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 2.8 x 40D Material hardness class: M2 1.3343 DMo5 Special features Material: M2 1.3343 DMo5 Application: granulating and shredding in recycling and pelletising lines Suitable for: processing plastics, sprues, films, pipes, plates Compatibility: ECON recycling and granulator machines Role: wear part for shredders, granulators and pelletisers FAQ What materials can be processed with this knife? The MetavCUT granulator/shredder knife is suitable for a wide range of plastic waste streams including sprues, films, pipes and plates; it is specified as a wear part for processing plastics in ECON systems. Is the knife a direct replacement for ECON equipment? Yes, the geometry and 40 x 25 x 2.8 x 40D dimensions match ECON installation requirements, enabling straightforward replacement without modification. How does the M2 1.3343 DMo5 material benefit production? M2 1.3343 DMo5 offers a balance of hardness and toughness that preserves edge stability under cyclic loads, which leads to consistent pellet quality and longer service intervals for the knife. Can this knife reduce dust and fines during granulation? Correct geometry and precise fit in the cutterhead help to reduce vibration and minimise dust formation, supporting cleaner granulate and less downstream processing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8 x 40D Shredder/Granulator Knife, 1.3207 EW9Co10 - MetavCUT
Benefit from the EW9Co10 high‑cobalt steel composition, exact 40 x 25 x 2.8 x 40D dimensions and direct compatibility with ECON recycling systems — order the blade directly via Metav Werkzeuge or consult our specialists if required. Shredding and Granulating Knife 40 x 25 x 2.8 x 40D (EW9Co10) — MetavCUT The Shredding and Granulating Knife 40 x 25 x 2.8 x 40D is a precision cutting tool for shredders, granulators and pelletisers in ECON recycling systems, engineered to produce uniform regrind and stable process performance. Made from EW9Co10 high‑cobalt steel Precise 40 x 25 x 2.8 x 40D dimensions Compatible with ECON recycling machines Optimised for low dust and uniform output Consistent granulate quality through precise cutting A correctly profiled cutting edge delivers measurable process benefits. The blade’s 1.3207 EW9Co10 grade provides a hard, wear‑resistant matrix that keeps the edge geometry stable under continuous load, translating into uniform pellet size and reduced fines. Consistent fragment dimensions improve downstream drying and extrusion yields, while a precision ground edge minimises frictional heat and thus dust generation, which supports cleaner operation and reduced filtration load. Technical advantages are presented in straightforward terms to aid procurement and production planning. Long service life with predictable maintenance intervals Durability is engineered into the material and profile to lower total operating costs. The cobalt‑alloy composition resists abrasive wear and retains cutting geometry longer than standard tool steels, enabling extended run times between changes and fewer unscheduled stops. Fit and finish follow ECON mounting standards so replacement is rapid and predictable, reducing downtime. The result is improved uptime and simplified inventory planning for replacement knives and spare sets — a clear efficiency gain for continuous recycling operations. Simple integration and supply reliability from Metav The knife is supplied to match ECON machine interfaces and is dimensioned as 40 x 25 x 2.8 x 40D for direct installation in shredders and granulators. MetavCUT production focuses on process‑optimised wear parts that are manufactured to consistent tolerances, supporting repeatable installation and process settings. Metav’s presence in Emmerich acts as a quality filter for the European market, ensuring steady availability and traceability of parts. Mit MetavCUT wird eine wirtschaftliche Alternative zu Originalteilen geboten: prozessoptimierte Verschleißteile, passgenau, langlebig und für den produktiven Einsatz konzipiert. Speak to Metav Werkzeuge for specification checks, rapid replacement supply and tailored recommendations for MetavCUT knives compatible with ECON systems — Metav Werkzeuge is ready to assist. Technical Data Article number: ECON--40x25x2.8x40D-13207-EW9Co10 Manufacturer: MetavCUT Material: 1.3207 EW9Co10 Dimensions: 40 x 25 x 2.8 x 40D Facts Dimensions: 40 x 25 x 2.8 x 40D Material designation: 1.3207 EW9Co10 SKU: ECON--40x25x2.8x40D-13207-EW9Co10 Special features For ECON recycling and granulation machines Suitable for shredders, granulators and pelletisers High‑wear cobalt‑grade steel Precision ground cutting edge Reduces dust and ensures uniform granulate FAQ How does the EW9Co10 material affect blade life? The EW9Co10 composition in this MetavCUT knife increases wear resistance and heat tolerance compared with standard tool steels, so the blade retains its edge longer and extends service intervals. Is this blade compatible with all ECON shredders and granulators? The knife is specified for ECON recycling systems and is dimensioned 40 x 25 x 2.8 x 40D to match typical ECON mounting; compatibility should be confirmed against the machine’s spare‑parts list and mounting drawing. Can the blade be re‑sharpened or must it be replaced? Depending on wear and the required cut quality, the blade can be reprofiled, but MetavCUT replacement knives are optimised for cost‑effective exchange to maintain consistent granulate quality. What process benefits can be expected after fitting this knife? Fitting a precision ground MetavCUT granulating blade reduces dust generation and produces more uniform particles, improving downstream handling and extrusion stability. What is the exact article number for ordering spares? Order using SKU ECON--40x25x2.8x40D-13207-EW9Co10 to ensure the correct MetavCUT knife and specifications are supplied. Manufacturer: MetavCUT; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40 x 25 x 2.8/1.7 x 40D Granulator/Knife For ECON Recycling Machines, M2 1.3343 DMo5 - MetavCUT
Take advantage of the combination of durable M2 tool steel, precise fit and proven compatibility with ECON recycling equipment to maintain steady production and consistent pellet quality. Order the replacement blades directly via Metav Werkzeuge or consult our technical team for application-specific advice. APL002 Granulator and Shredder Blade — 40 x 25 x 2.8/1.7 x 40D, M2 (1.3343 DMo5) by MetavCUT A robust replacement blade for ECON recycling and granulation systems, designed to deliver uniform cuts and reliable wear performance in continuous industrial operation. Hard M2 (1.3343 DMo5) tool steel Precision 40 x 25 x 2.8/1.7 x 40D dimensions Compatible with ECON recycling and granulator machines Consistent pellet quality for steady production flow The APL002 blade is engineered to produce uniform pellets and granules, reducing rework and improving downstream processing. Fitted in shredders and granulators, the cutting geometry promotes a clean shear that helps to minimise fines and dust. By achieving a consistent strand or chip size, the blade supports predictable melting and extrusion behaviour, which in turn helps stabilise cycle times and reduces material losses during reprocessing. Durable high-speed steel that extends runtime Manufactured from M2 (1.3343 DMo5) high-speed steel, the blade offers a balanced combination of hardness and toughness suitable for abrasive and intermittent loads typical in recycling environments. The selected alloyation improves resistance to wear and chipping while allowing for economical regrinding during scheduled maintenance. For operations that prioritise uptime, this material choice supports longer intervals between exchanges and conserves tool inventories. Precision fit that reduces changeover time Exact adherence to the specified dimensions — 40 x 25 x 2.8/1.7 x 40D — ensures a snug, repeatable fit in ECON housings and carrier plates. A precise fit keeps blade clearance uniform across the cutting circle, reducing vibration and uneven wear that can shorten service life. When blades are correctly matched to the rotor, the result is lower noise, less dust generation and fewer unplanned stops for adjustment, improving overall equipment effectiveness. Practical advantages for recyclers and processors As a dedicated wear part for shredders, granulators and pelletisers, the blade is designed for operational reliability rather than decorative finishes. The geometry and edge preparation focus on performance: sharp cutting edges for clean separation, dimensional accuracy for uniform product and a substrate that supports economical refurbishment. For facilities processing films, pipes, plates or sprues, these attributes translate into higher throughput and more consistent regranulate quality. Installation and lifecycle considerations Replacement intervals depend on processed material and operating conditions; however, the combination of wear-resistant M2 steel and correct mounting practice leads to predictable maintenance cycles. Blades can be reground where appropriate to restore cutting geometry; maintaining documentation of run hours and processed tonnage will help in planning reorder and regrind schedules. When in doubt about suitability for a specific material stream or machine setup, technical specifications and compatibility notes are available from our product advisors. For reliable, application-ready MetavCUT replacement blades for ECON systems, contact Metav Werkzeuge in Emmerich for tailored advice and supply coordination. With our MetavCUT range an economical alternative to original manufacturer parts is provided: process-optimised wear components that are precisely matched, long-lasting and engineered for productive industrial use. Technical data Article number: ECON-APL002-40x25x2.8/1.7x40D-M2-13343-DMo5 SKU: ECON-APL002-40x25x2.8/1.7x40D-M2-13343-DMo5 Label: Zerkleinerungsmesser / Granuliermesser 40 x 25 x 2.8/1.7 x 40D APL002 für ECON Maschinen aus M2 1.3343 DMo5 Manufacturer: MetavCUT Facts Dimensions: 40 x 25 x 2.8/1.7 x 40D Material designation: M2 (1.3343 DMo5) SKU identifier: ECON-APL002-40x25x2.8/1.7x40D-M2-13343-DMo5 Special features For use in shredders, granulators and pelletisers Designed for ECON recycling and granulation machines Optimised cutting geometry for low dust and consistent pellets Suitable for regrinding and refurbishment where applicable FAQ Is this blade compatible with all ECON granulators and shredders? The APL002 granulator and shredder blade is specified for use in ECON recycling and granulator machines; compatibility is confirmed by matching the 40 x 25 x 2.8/1.7 x 40D dimensions and mounting pattern to the target machine model. What advantages does M2 (1.3343 DMo5) offer for recycling blades? M2 (1.3343 DMo5) provides a balance of wear resistance and toughness appropriate for abrasive polymer streams; the APL002 blade uses this alloy to extend service intervals and allow controlled regrinding. Can the blade be resharpened or refurbished? The APL002 blade is suitable for refurbishment by regrinding where the parent material remains within tolerances; regrinding restores cutting geometry and can extend the component’s useful life. Which materials can be processed with this blade? This blade is intended for typical recycling tasks such as plastics, films, pipes and sprues; cutting performance will depend on material composition and contaminants — the APL002 is optimised for general recycling streams in ECON equipment. How does the blade influence dust and fines generation? The precision geometry and sharp edge of this blade reduce tearing and promote clean cuts, which helps to lower dust and fine particle generation and yields more consistent granulate quality. Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Why carbide indexable inserts remain the go-to choice
Carbide indexable inserts are the most widely used and versatile cutting inserts in machining. Manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, these inserts form the actual cutting edge on toolholders including milling cutters, turning inserts and drills. Synonyms used here: carbide cutting inserts, indexable carbide inserts.
How they perform under coolant and load
As the cutting element, carbide indexable inserts enable economic and precise machining across a broad spectrum of materials, from soft non‑ferrous metals to high‑strength steels. In tool systems without internal cooling, heat generated at the cutting zone is normally removed by external machine nozzles using coolant, which is adequate for most standard tasks, open contours and easily accessible components. For deep holes, heavy roughing or when working with materials that generate high temperatures such as stainless steel or titanium alloys, the use of internal cooling is essential: coolant is delivered through internal channels in the toolholder directly to the cutting edge under pressure to prevent thermal overload, optimise chip formation and extend insert life.
Key performance gains you can expect
- increased tool life through the high wear resistance and balanced toughness of tungsten carbide inserts
- consistent chip control and surface finish when coolant is delivered precisely via internal channels
- reduced machine downtime thanks to easy indexability and fast insert changes on compatible toolholders
- broad material compatibility, from soft non‑ferrous metals to hardened steels, enabling fewer tool variants in stock
- economic productivity by combining long stand life with repeatable cutting performance
Metav as your precision partner
Metav stands for the democratisation of precision. With decades of expertise and a catalogue that spans from high‑precision measuring instruments to full workshop equipment, Metav acts as a reliable quality filter for the European market from its Emmerich location. Over 48,000 customers trust Metav’s range and service; the breadth of more than 250,000 products helps reduce supplier complexity while ensuring consistent supply and product quality for industry and trade.
In brief: carbide indexable inserts at a glance
Carbide indexable inserts deliver the necessary balance of extreme wear resistance and mechanical toughness for versatile, cost‑efficient machining. Used with appropriate coolant strategy—external coolant for general work and internal cooling for demanding, deep or heat‑intensive operations—they are a cornerstone of modern metalcutting.
FAQ
What are carbide indexable inserts made of?
Carbide indexable inserts are manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, producing a cutting material that combines high wear resistance with the toughness needed to resist mechanical shock.
When is internal cooling necessary for carbide cutting inserts?
Internal cooling becomes necessary for deep hole drilling, heavy roughing and when machining materials that generate significant heat, such as stainless steel or titanium alloys. Internal cooling channels in the toolholder deliver coolant directly to the cutting edge to prevent thermal overload and improve chip breakage.
Can indexable carbide inserts be used without internal cooling?
Yes. For most standard applications, open contours and well‑accessible components, external coolant supplied by machine nozzles is sufficient, as tungsten carbide is more tolerant of moderate temperature fluctuations than some alternative materials.
How do carbide indexable inserts contribute to production efficiency?
By offering long tool life, stable cutting performance and quick indexability on compatible toolholders, indexable carbide inserts help reduce downtime, simplify tool inventories and maintain consistent part quality across varying materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com