Carbide indexable inserts for high‑performance metalworking
Carbide indexable inserts are wear‑resistant cutting elements designed to deliver economical, precise material removal across a wide range of workpieces, offering excellent balance between extreme wear resistance and the toughness required to withstand mechanical shocks. Used on toolholders such as cutters, turning tools and twist drills, they enable efficient machining of materials from soft non‑ferrous alloys to high‑strength steels by optimising cutting forces and thermal stability. For standard accessible contours external coolant is often sufficient, while deep holes, heavy cutting or machining of stainless steel and titanium alloys benefit from internal coolant channels to protect the cutting edge, improve chip control and extend insert life. Key advantages include high durability, consistent surface finish and reduced tool changeover times through the use of replaceable indexable inserts, carbide grades and toolholder systems.
6.5mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill — Left-cutting HSS-G, Ø 6.5 mm, 135° (DIN 338) by MetavCUT The Twist Drill is a left-cutting metal drill for Drilling Machines and Hand Drills, designed for efficient removal of broken screws and demanding work in alloyed and unalloyed steels. Left-cutting design for reverse rotation drilling Ø 6.5 mm for precise metal bores 135° tip angle for hard materials HSS-G material for long tool life Conforms to DIN 338 short twist drill standard Fast, low-effort drilling in tough materials Engineered for professional metalworking, the Twist Drill uses a left-cutting grind that enables drilling in reverse rotation to assist in removing broken or seized screws. The combination of HSS-G steel and a 135° tip angle reduces penetration resistance in hard materials such as stainless steel. As a result, users benefit from faster drilling and reduced operator strain while maintaining clean bore starts. Durable construction and standardised dimensions for reliable results Manufactured to DIN 338, this short twist drill features a cylindrical shank and robust geometry for consistent performance in stationary and portable machines. The HSS-G composition ensures wear resistance under frequent use and delivers predictable life cycles, making the tool a dependable choice where durability matters most. Optimised for metalworking and specialised reverse tasks The left-cutting execution is specifically suited to metal applications and tasks that profit from a counterclockwise cut, such as extracting screw remnants. For proper operation the Twist Drill should be used in a Drilling Machine or Hand Drill capable of left rotation. This specialised grind also improves centring and reduces lateral forces during initial engagement. Designed for professionals seeking speed and control Targeted at mechanics, maintenance technicians and metalworking professionals, the Profi Line twist drills combine precision Ø 6.5 mm sizing with a geometry tuned for throughput and stability. The tool allows quicker cycle times and steadier feed, which translates into higher workshop productivity without compromising hole quality. METAV Werkzeuge provides expert advice and application support for complex requirements. Strong recommendation: Choose the MetavCUT Profi Line Twist Drill for demanding metalwork and contact METAV Werkzeuge for personalised technical consultation — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60065-FDA Diameter: 6.5 mm Tip angle: 135° Execution: Left-cutting (linksschneidend) For machine: Drilling Machine / Hand Drill Material: HSS-G Standard: DIN 338 Series: Profi Line Application: Drills for metal Notes: Left-cutting design aids extraction of broken screws; left-cut HSS drill enables up to 40% faster drilling and requires up to 50% less feed force compared to conventional HSS drills; suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied in machining high-strength materials and larger bore diameters; its left-cutting grind is particularly effective for removing broken screws and for metalworking where reverse rotation provides advantages. The design is easy to resharpen and withstands higher loads. Which three drill types exist? Drill types are generally categorised as metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and differs from wood and masonry variants in geometry and cutting edge design.
6.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Introducing Twist Drill Type N (Short) — 6.5 mm · 135° · HSS-G · Bright Finished · DIN 338 The Twist Drill is a short Type N drill designed for precise metalworking with a 6.5 mm diameter, optimised for Drilling Machine applications. Short Type N Twist Drill for precise metal work HSS‑G material: faster drilling, less feed force 135° tip for harder materials such as stainless steel Fully ground shank for improved concentricity Conforms to DIN 338 for short cylindrical drills Faster penetration and lower feed force for demanding metalwork The HSS‑G construction delivers a clear performance advantage: up to 40% faster drilling and approximately 50% lower feed force compared with conventional HSS tools. This means less operator strain and reduced wear on both tool and machine when processing alloyed and unalloyed steel, cast steel and non‑ferrous metals. The 135° Tip is optimised for tougher materials, shortening dwell on the surface and improving centring on curved or hardened parts. For workshop environments where efficiency and repeatability matter, this design converts technical properties into measurable productivity gains. Short design for superior stability and precise holes Built to the DIN 338 definition of a short cylindrical drill, the reduced overhang of the Short version greatly increases rigidity and reduces bending. The shorter exposed length results in improved concentricity and less vibration during operation, which translates into cleaner hole geometry and longer tool life. Where tight tolerances are required, the reduced tendency to deflect ensures repeatable results even at larger diameters and higher spindle speeds. This stability makes the tool particularly suitable for stationary and portable Drilling Machine setups that demand both accuracy and throughput. Shank, finish and practical advantages at a glance The Fully Ground Shank provides excellent concentricity and secure clamping in chucks, while the Bright Finished surface aids chip evacuation and visual inspection for wear. With a Spiral Length of 63 mm and an overall length of 101 mm, the geometry balances cutting capacity and strength for common metalworking tasks. The Type N normal spiral is the classic geometry for metal drilling and is straightforward to resharpen, which keeps replacement costs down and simplifies workshop maintenance routines. These characteristics combine to offer a robust solution for professional metalworkers seeking a reliable, easy‑to‑use drill bit. Strong recommendation: choose the MetavCUT Twist Drill Type N short in HSS‑G for precision metal drilling; for technical advice or to confirm suitability for specific applications, METAV Werkzeuge offers expert consultation — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical details Designation: Twist Drill Marke: MetavCUT SKU: 27065-FDA Diameter: 6.5 mm Tip angle: 135° Type: Type N Execution: Short Material: HSS-G Spiral length: 63 mm Overall length: 101 mm Shank execution: Fully ground Colour / Finish: Bright finished Application: Drills for metal Standard: DIN 338 Model series: Basic Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N (Short) is primarily used for drilling high‑strength materials and larger diameters in metalworking. Designed for metal, this short HSS‑G drill excels when machining alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics; its geometry and material make it resilient under greater loads. Which three drill types exist? Commonly distinguished drill types are Metal drill, Wood drill and Masonry/Concrete drill. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.
6.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombination aus kurzer Ausführung, HSS-G und 135° Spitzenwinkel sorgt für stabile, präzise Bohrungen in harten Werkstoffen. Bestellen Sie den Spiralbohrer direkt über Metav oder nutzen Sie die Beratung bei technischen Fragen. Spiralbohrer – kurzer HSS-G Metallbohrer von MetavCUT Spiralbohrer ist ein geschliffener HSS-G Metallbohrer in kurzer Ausführung für präzise Bohrungen in Stahl, Gusseisen und Nichteisenmetallen. Spiralbohrer von MetavCUT, HSS-G geschliffen Kurze Ausfuhrung für erhöhte Stabilität Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Geschliffene Spirale für präzise, saubere Bohrlöcher Höchste Präzision und Stabilität beim Bohren Die kurze Ausfuhrung reduziert die Auskraglänge und minimiert damit das Verbiegen des Bohrers, was insbesondere bei mittleren Durchmessern zu deutlicher Präzision bei Bohrbildern führt. Durch die geschliffene Schaft- und Spiralengeometrie wird der Rundlauf verbessert, sodass saubere Bohrlöcher mit reproduzierbaren Durchmessern erzielt werden. Dieser Vorteil macht den Spiralbohrer zur ersten Wahl, wenn es auf Passgenauigkeit und definierte Bohrqualität ankommt. Schneidstoff und Spitze für schnelleres Arbeiten Der Einsatz von HSS-G (geschliffen) erlaubt höhere Schnittgeschwindigkeiten und schärfere Schneidkanten; dadurch sind bis zu 40 % schnelleres Bohren und etwa 50 % geringere Anpresskraft erreichbar gegenüber älteren HSS-Ausführungen. Der 135° Spitzenwinkel unterstützt das Anbohren harter Werkstoffe wie Edelstahl und Temperguss, weil die Anlaufkräfte verteilt werden und das Reiben reduziert bleibt. Diese Kombination sorgt für wirtschaftliche Fertigungszeiten bei gleichbleibender Bohrbildqualität. Einsatzgebiete, Maschinen und Materialempfehlung Mit einem Durchmesser von 6,5 mm fällt der Bohrer in den Standard-Bereich und eignet sich besonders für Werkstatt, Montage und allgemeine Metallbearbeitung. Einsatzgebiete sind das Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle sowie Hartkunststoff. Der Spiralbohrer ist für Handgeführte Akkubohrschrauber ebenso geeignet wie für stationäre Säulenbohrmaschinen, wobei bei tieferen Löchern und hohen Serien bessere Spanabfuhrmaßnahmen zu empfehlen sind. Normenkonformität und Verarbeitung Die Fertigung nach DIN 338 klassifiziert den Bohrer als kurze Spiralbohrerausführung mit Zylinderschaft; die geschliffene Ausführung (HSS-G) steht für hohe Rundlaufgenauigkeit und scharfe Schneiden. Geschliffene Bohrer sind oft spröder als walzgewalzte Typen, daher empfiehlt sich der Einsatz bevorzugt an stationären Maschinen mit Kühlung. Die Ausführung als Typ N bedeutet Normalspirale, klassisch abgestimmt auf Metallbearbeitung. Empfehlung: Für präzise Metallbohrungen die HSS-G Ausführung von MetavCUT wählen und bei Fragen den technischen Kundendienst von Metav kontaktieren: info@metav-werkzeuge.com oder ☎️ +49 2822 7131930 Produktmerkmale Artikelnummer: 45065-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Fakten Durchmesser: 6,5 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen Typ: Typ N (Normalspirale für Metall) Ausführung: kurz Für Bohrmaschine: Handbohrmaschine Farbe: blank (bright finished) FAQ Ist der Spiralbohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS-G Ausführung und mit 135° Spitzenwinkel eignet sich gut für die Bearbeitung von Edelstahl und anderen harten Werkstoffen, da die Spitze das Anbohren erleichtert und die geschliffene Geometrie saubere Bohrbilder liefert. Welche Maschinen sind für den Einsatz des Bohrers geeignet? Der kurze Spiralbohrer ist für Handbohrmaschine und stationäre Säulenbohrmaschinen ausgelegt; für tiefe Bohrungen oder Serien empfiehlt sich eine stationäre Maschine mit Kühlung und kontrollierter Spanabfuhr. Was bedeutet HSS-G und welchen Vorteil bietet es? HSS-G steht für geschliffenen Schnellarbeitsstahl; diese Fertigungsart erzeugt sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzise und saubere Bohrlöcher ermöglicht, dabei aber eine sorgfältige Handhabung und Kühlung erfordert. Welche Norm gilt für diesen Bohrer und warum ist das wichtig? Die Einhaltung der DIN 338 zeigt, dass es sich um eine kurze Spiralbohrerausführung mit Zylinderschaft handelt; das schafft Vergleichbarkeit bei Abmessungen und Toleranzen und erleichtert den Einsatz in definierten Fertigungsprozessen.
6.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Metal Drill, 6.5 mm, 135° (Type N, DIN 338, Bright Finished) The Twist Drill is a short HSS‑G drill for Drilling Machines, designed for precise metal drilling and heavy‑duty applications. Short HSS‑G design for demanding metal work Higher stability from reduced overhang and short length 135° tip for efficient entry in hard materials Fully ground shank for high concentricity DIN 338 compliant short twist drill Faster, more stable drilling for metal workpieces The Short Design of this HSS‑G Twist Drill reduces the protruding length from the Chuck, delivering noticeably higher Stability and reduced deflection when drilling into hard alloys. This stability directly improves hole accuracy and roundness, which is essential in workshop and industrial settings where repeatable results matter. Users benefit from lower scrap rates and less rework when tight tolerances are required. Lower feed force and improved penetration in hard materials A 135° Tip Angle combined with the ground geometry allows easier entry into harder materials such as stainless steel. The ground HSS-G geometry reduces the required feed force by up to 50% and can enable up to 40% faster drilling compared with conventional HSS variants. For applications that demand efficient material removal and less operator fatigue, this short Twist Drill offers measurable productivity gains. Precisely ground flute geometry for clean holes The fully ground flutes (HSS‑G) produce sharp cutting edges and excellent concentricity, resulting in clean, burr‑reduced holes and improved surface finish. This benefit is particularly useful when subsequent operations—such as reaming or tapping—rely on a high‑quality pilot hole. Note that ground drills can be more brittle than rolled types, so cooling and steady clamping are recommended for best tool life. Optimised for metal; simple explanation for non‑specialists Type N represents a classic metal Twist Drill spiral, intended for Metal Drilling rather than soft wood or masonry. In practical terms: choose this short HSS‑G drill when working on alloyed or unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. If drilling in wood or concrete, a different specialist drill type will deliver better guidance and hole quality. Robust standard compliance and practical handling tips Conforming to DIN 338 confirms that this short Twist Drill meets established industry dimensions and shank specifications, simplifying machine setup and toolholder selection. For consistent results: use appropriate coolant, clamp the workpiece securely, and avoid excessive overhang—even though the short length improves rigidity, correct machining practice remains decisive for tool life. Strongly recommended: choose the MetavCUT short HSS‑G Twist Drill for stable, precise metal drilling; for application advice or detailed technical data contact METAV Werkzeuge — expert consultation available by email, phone or WhatsApp at info@metav-werkzeuge.com / +49 2822 7131930 / +49 170 2837271 Technical data Designation: Twist Drill (Short) Brand: MetavCUT SKU: 48065-FDA Diameter: 6.5 mm Tip angle: 135° Type: Type N (Normal Spiral) Execution: Short Overall length: 101 mm Spiral length: 63 mm Shank execution: Fully Ground Material: HSS‑G (Ground High Speed Steel) Surface / Colour: Bright Finished For Drilling Machine: Drilling Machine (Hand Drill compatibility for small tasks) Norm: DIN 338 Application: Drills for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the short Twist Drill best used for? The short Twist Drill from MetavCUT is primarily used for Metal Drilling; its reduced overhang and HSS‑G geometry make it suitable for precise work in alloyed and unalloyed steel, cast components and hard plastics where accuracy and low deflection are required. How does the 135° tip affect drilling performance? A 135° tip on the MetavCUT Twist Drill provides a flatter cutting face that shortens penetration time in harder materials and improves centring for tough steels, making the tool more efficient for industrial metalworking tasks. What are Twist Drills used for Twist Drills are mainly applied when machining high‑strength materials and larger drill diameters. This form is easy to regrind and withstands higher loads, making it suitable for demanding metal cutting work. Which three drill types exist There are three common drill categories: Metal Drills, Wood Drills, Stone/Concrete Drills. Why are Twist Drills sharpened (pointed)? Sharpening the point reduces the cross‑cut at the tip, which significantly lowers friction and the required feed force. At the same time the sharpened point improves centring in the workpiece. Can you use a metal drill in wood? A Metal Drill can be used in Wood, but guidance and finish are inferior compared with dedicated wood bits. Metal Drills are easier to resharpen and have less self‑feeding tendency, resulting in a rougher hole in timber. For which drilling depths is the Twist Drill most used? A solid through hole is typically made with a Twist Drill. For diameters up to 20 mm and drill depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is not universally correct. Evaluate operating conditions carefully to decide whether the higher purchase cost of HSSE is justified for the intended application. If uncertain whether this MetavCUT Twist Drill meets specific requirements or for supplementary technical data, METAV Werkzeuge provides comprehensive and competent advice — contact info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271.
6.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill (Short, 6.5 mm) — HSS‑G, TIN‑coated, DIN 338 by MetavCUT, 118° point angle, fully ground shank A Twist Drill short HSS‑G bit designed for precise metal drilling in Drilling Machines, offering a TIN‑coating for reduced wear and conformity to DIN 338. Short design for increased stability TIN‑coated for reduced friction and wear HSS‑G material for high cutting speed 118° point angle for improved centring Conforms to DIN 338 for metalworking Greater accuracy through a short design and premium HSS‑G This short twist drill from MetavCUT combines a compact overall length with a fully ground HSS‑G body to deliver higher rigidity and precise hole quality. Because the outboard length is reduced, the bit shows less deflection under load, which directly benefits hole concentricity and dimensional accuracy when working with steel and other metals. The ground manufacturing process produces very sharp cutting edges and excellent runout accuracy, resulting in cleaner holes and reduced rework. Longer tool life and lower wear thanks to TIN coating A TIN‑coated surface significantly lowers friction at the cutting edges and helps dissipate heat when used with an appropriate coolant. This coating increases lifetime in metal applications and reduces adhesive wear, so the bit maintains geometry longer under continuous operation. For users who prioritise uptime and fewer tool changes, the TIN layer offers a measurable advantage during serial drilling tasks on alloyed and unalloyed steels, cast materials and non‑ferrous metals. Standards and production method ensure repeatable results Manufactured to DIN 338 as a short twist drill, this bit follows established dimensional and geometric specifications for cylindrical shank short drills. The designation HSS‑G (ground) indicates that the flutes and point geometry are produced by CNC grinding rather than rolling, which yields very sharp cutting lips and high concentricity. For operators this means reliably reproducible hole quality in stationary and portable drilling setups, provided cooling and correct feeds are applied. Application range and practical guidance for use Designed primarily as a Twist Drill for metal, the short HSS‑G geometry is suitable for alloyed and unalloyed steel, temper cast iron, cast iron, sintered iron, copper, bronze, nickel silver and hard plastics. The 118° point angle aids initial centring and is particularly helpful when working on slightly curved or softer surfaces such as aluminium, though feed and speed must be adapted per material. When drilling harder steels or deep holes consider appropriate cooling and gradual pecking to maintain tool life and hole quality. MetavCUT recommends this short Twist Drill for precision metalworking tasks; METAV Werkzeuge provides expert technical advice and application support — contact info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 for personalised assistance Technical Information Designation: Twist Drill (Short) Brand: MetavCUT SKU: 28065-FDA Diameter: 6.5 mm Point angle: 118° Type / Execution: short Coating / Colour: TIN‑coated Application: Drills for metal Spiral length: 63 mm Overall length: 101 mm Shank finish: fully ground Material: HSS‑G Norm: DIN 338 Series: Basic Line Suitable for: alloyed and unalloyed steel, temper cast iron, cast iron, sintered iron, copper, bronze, nickel silver, hard plastics Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill is primarily used for metalworking and is suitable for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics; its short design gives better stability for precise metal drilling operations. Why choose a TIN‑coated HSS‑G MetavCUT Twist Drill? A TIN‑coated HSS‑G MetavCUT Twist Drill reduces friction at the cutting edge, increases resistance to adhesive wear and therefore extends service life when drilling metals under appropriate cooling. For what are Twist Drills mainly applied? They are mainly applied in the machining of high‑strength materials and for larger drill diameters; the shape is relatively simple to grind and withstands higher loads. Which three drill types are there? The three common drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills re‑pointed? Re‑pointing reduces the transverse cutting edge at the tip of a Twist Drill, lowering friction forces so less thrust is needed while improving the drill’s centring in the workpiece. Can a metal drill be used for wood? A metal drill can be used in wood but offers worse guidance and a less clean finish; however, such drill bits are easier to regrind and usually have a lower self‑feeding tendency. At which drilling depths is the Twist Drill the most used tool? For solid hole drilling, a Twist Drill is commonly used in diameters up to 20 mm and depths up to 100 mm; it is the most frequently applied tool for these ranges.
6.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill Type N by MetavCUT — 6.5 mm, 135° TIN-coated, short HSS-G (DIN 338) The Twist Drill Type N short HSS-G is a precision metalworking tool designed for use in Drilling Machines, offering high stability and extended tool life for demanding industrial applications. Short design for increased stability TIN-coated surface extends tool life 135° tip for hard materials like stainless steel HSS-G fully ground for fast, precise drilling Conforms to DIN 338 for reliable metalworking Increased Stability and Accurate Holes for Metalworking Shorter tool overhang improves performance in demanding tasks. The short design of this Twist Drill minimises vibration and lateral deflection, delivering consistently accurate holes in alloys and steels. Because the flutes and cutting geometry are ground rather than rolled, the tool achieves high runout precision and cleaner bore edges, which reduces rework and improves component fit. This stability is especially beneficial when machining on portable and stationary Drilling Machines where rigid setup and repeatable hole quality are required. Coating and Material for Longer Lifetime and Efficiency A TIN-coated surface combined with HSS-G base material reduces friction and increases wear resistance during metal drilling. The coating lowers heat generation at the cutting edge, so the tool maintains hardness and cutting performance for longer periods under appropriate cooling. For operations involving alloyed and unalloyed steel, cast materials or non-ferrous metals, this combination supports higher productivity and fewer tool changes, which contributes directly to process efficiency on the shopfloor. Geometry Optimised for Hard Materials and Reduced Feed Forces The 135° tip angle is tailored for harder workpieces and reduces initial biting forces. A blunter tip compared with standard angles decreases tendency to wander on the workpiece surface and shortens lead-in time when penetrating dense materials. The ground geometry also ensures sharper cutting edges and improved chip evacuation, meaning that operators can achieve deeper, cleaner holes with less applied pressure—important when machining tough steels or sintered components. Practical Use Cases and Machine Compatibility Designed in accordance with DIN 338, this short Type N drill is suited for metalworking tasks on both stationary and mobile Drilling Machines. The fully ground shank facilitates precise clamping and concentricity in standard chucks. Typical applications include machining of Tempered Steel, Gusseisen, Bronze, Copper and engineering plastics where controlled chip formation and tool life are priorities. For best results, pairing the tool with appropriate coolant and stable fixturing is recommended to maximise performance and avoid premature wear. Who Benefits from This Tool and Why Manufacturers, toolrooms and maintenance professionals who require reproducible hole quality under production conditions will find the Twist Drill advantageous. Its short format makes it ideal for setups where rigidity is limited or where series precision is essential. For users transitioning from rolled HSS drills, the ground geometry delivers noticeable improvements in drilling speed and surface finish while remaining simple to resharpen when required. We recommend MetavCUT’s short TIN-coated HSS-G Twist Drill for precision metalworking applications; for expert technical advice or to verify suitability for specific materials and machine setups, METAV Werkzeuge provides extensive consultation via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp at +49 170 2837271 Technical Data Designation: Twist Drill (Spiralbohrer) Brand/Manufacturer: MetavCUT SKU: 46065-FDA Diameter: 6.5 mm Tip angle: 135° Type: Type N Coating: TIN-coated Material: HSS-G Spiral length: 63 mm Overall length: 101 mm Shank execution: Fully ground Execution: Short Standard: DIN 338 Intended machine: Drilling Machine Application: Drills for metal Model series: Standard Line Colour: TIN-coated Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill primarily used for? A MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters; it is particularly effective when working in metal because the short design and ground geometry offer higher precision. This form is easy to resharpen and withstands higher loads, making it suitable for professional metalworking tasks. Which three drill types exist? The main categories are Metal Drills, Wood Drills and Masonry/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drills group and is optimised for metal applications with corresponding geometry and coatings.
6.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short Type N, 6.5 mm, TIN-coated HSS-G (MetavCUT) The Twist Drill short Type N is a precision metal-drilling bit for hand and drilling machines, engineered for stable, accurate holes in hard materials. Short design for high stability and precision 6.5 mm Diameter for standard metal holes 135° Point angle for harder materials TIN-coated HSS-G for extended tool life Fully ground shank for fast, clean drilling High stability and longer tool life for demanding metalwork Short-design Twist Drill bits combine a reduced overhang with superior rigidity, which minimizes vibration and deflection during drilling. The HSS-G substrate paired with a TIN-coated surface significantly lowers friction and wear; with appropriate cooling the coating helps to extend lifetime when machining alloyed and unalloyed steel, cast parts, copper alloys and hard plastics. This results in more consistent Hole Quality and fewer tool changes for production and workshop tasks. Geometry optimised for hard materials and fast centring A 135° point angle reduces walking and shortens the initial penetration time when tackling stainless steels and other tough metals. The fully ground flute geometry (HSS-G) produces sharp cutting edges and high runout accuracy, giving cleaner chips and improved centring compared with rolled drills. Classified as Type N and conforming to DIN 338, this design is the classic choice for metalworking where repeatable, precise results are required. Efficient performance with lower feed forces and robust construction The shortened overall length and fully ground shaft reduce the required thrust and improve stability under load; tests of comparable ground HSS tools show up to 40% faster drilling and about 50% less feed force, which benefits battery-powered and portable drilling machines as well as stationary equipment. The combination of short geometry and the TIN-coated surface makes this bit particularly suitable for workshop applications where throughput and hole integrity matter. Who benefits from this short metal drill bit and how to use it best Workshops, maintenance teams and precision fabricators will appreciate the MetavCUT short Twist Drill when consistent hole diameter and surface finish are priorities. Use moderate spindle speeds, steady feed, and an appropriate coolant for alloyed steels to maximise the advantage of the coating and ground cutting edges. The bit is matched to hand and drilling machines and is recommended for metal drilling tasks up to typical diameters and depths encountered in mechanical assembly and repair. Strong recommendation: For precision metalworking choose the MetavCUT Twist Drill short Type N with TIN coating — METAV Werkzeuge offers expert, personalised advice if you are unsure whether this tool suits your application; contact us by eMail: info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 41065-FDA Diameter: 6.5 mm Point angle: 135° Type: Type N Execution: short Material: HSS-G Coating/Colour: TIN-coated Shank execution: fully ground Flute length (Spirallänge): 63 mm Overall length (Gesamtlänge): 101 mm For drilling machine: Drilling Machine / Handbohrmaschine Norm: DIN 338 Model series: Profi Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill (Type N) is primarily used for machining high-strength materials and larger diameters; its short design is especially suitable for precise metalworking. It performs well on alloyed and unalloyed steel, cast iron, copper alloys and hard plastics. The geometry is easy to resharpen and withstands higher loads under proper cooling. Which three drill types are there? Typical categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group (Type N), optimised for metal applications rather than soft wood or masonry. Why are Twist Drills point-ground? Point grinding reduces the cross-edge at the tip of the Twist Drill, lowering friction and therefore reducing the required feed force. At the same time the ground tip improves centring in the workpiece for more accurate hole starts. Can the Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and hole finish are inferior compared with dedicated wood drills. The MetavCUT short metal drill is easier to resharpen and offers less self-feeding effect, so results in wood are possible but not optimal.
6.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill Spezial — HSS‑G Metal Twist Drill, Ø 6.5 mm, 135° The Twist Drill Spezial is a HSS‑G metal twist drill designed for high‑speed drilling in alloyed and unalloyed steels and suitable for drilling machines and cordless hand drills. High‑performance HSS‑G for metalworking 135° point angle for harder materials Multi‑bevel W tip for clean hole entry Triangular shank ensures secure grip in chucks Conforms to DIN 338 for short HSS twist drills Maximise drilling speed with reduced feed effort The Twist Drill Spezial combines a ground HSS‑G body with an optimised cutting geometry that delivers up to 40% faster drilling while requiring 50% less feed force compared with conventional HSS drills. This efficiency reduces operator fatigue on repetitive tasks and shortens cycle times in production. The specially designed tip supports quick penetration and stable cutting under higher loads, making it well suited for industrial metalworking applications. Precise design for cleaner holes and reliable clamping The multi‑bevel W tip and tailored flute geometry enable a clean start and produce holes with minimal burr formation. The drill’s triangular shank provides positive drive in standard chucks and quick‑change adapters, improving torque transmission for cordless and handheld use. The product follows DIN 338, a recognised standard for short spiral drills with cylindrical shank, which helps ensure reproducible dimensions and compatibility with machine tool holders. Robust material choice and target applications Manufactured from HSS‑G, this twist drill is optimised for drilling in alloyed and unalloyed Steel, Cast Iron, Aluminium, Non‑ferrous Metals and Hard Plastics. The 135° point angle reduces wandering on harder materials such as stainless steel and decreases required thrust, which supports cleaner, more accurate holes in demanding tasks. Typical users include workshop professionals, maintenance technicians and production operatives who require consistent results on metallic components. Practical handling, resharpening and working tips A larger point angle such as 135° lowers the quenching of the tip and shortens the initial entry time; it also improves centring when reaming is not desired. The W‑sharpened tip is relatively easy to resharpen on standard bench grinders without losing geometry, extending tool life and reducing consumable costs. For complex material mixes or special production conditions, METAV Werkzeuge provides expert technical advice and support to select the correct drill geometry and cutting parameters. Strong recommendation: Choose the MetavCUT Twist Drill Spezial for demanding metal drilling tasks — for tailored advice contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 55065-FDA Type / Model series: Spezial Diameter: 6.5 mm Spiral length: 63 mm Overall length: 101 mm Point angle: 135° Material: HSS‑G Shank execution: with multi‑bevel cutting edge and triangular shank Application: Drills for metal For: Drilling Machine / Hand drill Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill Spezial? The MetavCUT Twist Drill Spezial is primarily used for machining high‑strength materials and larger hole diameters; it is effective in alloyed and unalloyed Steel, Cast Iron, Non‑ferrous Metals, Aluminium and Hard Plastics. Its sharpened HSS‑G geometry allows faster drilling and lower feed forces while maintaining precise, burr‑reduced hole edges. Which three drill types exist? Three common drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Spezial belongs to the metal drill category and is engineered specifically for metalworking tasks.
6.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Die Kombination aus HSS-G geschliffener Geometrie und langer Ausführung nach DIN 340 ermöglicht präzise, tiefere Bohrungen bei reduziertem Kraftaufwand; die Spirallänge von 97 mm verbessert die Spanabfuhr in schwer zugänglichen Bereichen. Bestellen Sie das Produkt direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (Standard Line) Der Spiralbohrer von MetavCUT in langer Ausführung ist ein geschliffener HSS-G Bohrer für präzise Metallbearbeitung und tiefes Bohren im Werkstattbereich MetavCUT Spiralbohrer Standard Line HSS-G geschliffen für harte Werkstoffe Lange Ausführung nach DIN 340 für tiefere Bohrungen Spitzenwinkel 135° für schwer zerspanbare Materialien Gesamtlänge 148 mm, Spirallänge 97 mm Materialqualität und Verarbeitungsnutzen für zuverlässige Ergebnisse Das Werkstoffkonzept basiert auf HSS-G, also geschliffenem Schnellarbeitsstahl, der besonders scharfe Schneiden und hohe Rundlaufgenauigkeit ermöglicht. Diese Ausführung reduziert die Anpresskraft deutlich und beschleunigt den Vorschub, sodass Anwender bei Stahl und Guss eine höhere Produktivität erzielen. Wegen der geschliffenen Geometrie ist jedoch auf stabile Spannverhältnisse und Kühlung zu achten, um Bruchrisiken zu minimieren. Leistung und Einsatzgebiet für typische Metallarbeiten Für Bohrungen in legiertem und unlegiertem Stahl, Gusseisen, Temperguss sowie Nichteisenmetallen bietet der Bohrer durch den Spitzenwinkel von 135° bessere Anbohrwerte und geringeres Ausbrechen beim Austritt. Die längere Spirallänge von 97 mm sorgt für verbesserte Spanabfuhr bei tieferen Löchern und erleichtert den Einsatz in schlecht zugänglichen Bohrstellen. Kühlung und eine stationäre Aufnahme erhöhen Standzeit und Sicherheit. Geeignet für Werkstatt, Montage und präzise Handhabung Dieser Bohrer richtet sich an Anwender aus Werkstatt, Montage und professionellem Handwerk, die tiefe oder schwer zugängliche Bohrungen benötigen und eine Standard-Drill-Systemlösung suchen. Als 6,5 mm Bohrer liegt er im Standard-Bereich für handgeführte Maschinen und Säulenbohrmaschinen, wobei bei hoher Präzision ein Anpunkten mit Zentrierbohrer empfohlen wird. Die Verpackungseinheit von 10 Stück eignet sich für durchlaufende Anwendungen und Nachschubplanung. Besonderheiten, Praxis-Tipps und Verarbeitungshinweise Die lange Ausführung nach DIN 340 kombiniert mit geschliffener Schaftausführung erhöht die Stabilität bei tiefen Bohrungen, verlangt aber eine vorsichtige Handhabung, da geschliffene HSS-Varianten spröder sind als gewalzte Typen. Bei der Anwendung empfiehlt sich moderate Schnittgeschwindigkeit, konstante Kühlschmierung und ein kontrollierter Vorschub. Die helle Oberfläche (bright finished) erleichtert die Sichtkontrolle von Verschleiß und Spanklemmung. Empfehlung: Die MetavCUT Standard Line Spiralbohrer in HSS-G langer Ausführung ist die erste Wahl für präzises Tiefbohren in Stahl und Guss — Bestellen Sie über Metav Werkzeuge oder kontaktieren Sie uns per E‑Mail info@metav-werkzeuge.com für technische Beratung und Bestellmöglichkeiten Produktmerkmale Artikelnummer: 53065-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 6,5 mm Gesamtlänge: 148 mm Spirallänge: 97 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Schaftausführung: geschliffen Ausführung: lang (nach DIN 340) Für: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine Farbe: blank FAQ Was bedeutet die lange Ausführung beim Spiralbohrer von MetavCUT? Die lange Ausführung bei dem MetavCUT Spiralbohrer (Standard Line, SKU 53065-FDA) entspricht der DIN 340 und bietet eine verlängerte Spirallänge, die für tiefere Bohrungen und schwer zugängliche Stellen geeignet ist. Für welche Materialien ist der HSS-G Spiralbohrer geeignet? Der HSS-G Spiralbohrer von MetavCUT ist geeignet für legierten und unlegierten Stahl, Gusseisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Ist der 6,5 mm Bohrer für handgeführte Bohrmaschinen geeignet? Ja, der 6,5 mm Durchmesser liegt im Standard-Bereich und ist für Handbohrmaschine und Säulenbohrmaschine geeignet; bei hoher Präzision vorher anpunkten. Warum ist der Spitzenwinkel von 135° vorteilhaft? Der Spitzenwinkel 135° reduziert das Wandern beim Anbohren in härteren Werkstoffen und verbessert das Anbohrverhalten, besonders bei Edelstahl und gehärteten Bauteilen. Wie sollte der MetavCUT Spiralbohrer eingesetzt werden, um die Standzeit zu erhöhen? Um die Standzeit des MetavCUT Spiralbohrers zu erhöhen, sollten konstante Kühlung, angepasste Schnittgeschwindigkeit und ein kontrollierter Vorschub verwendet werden; bei stationärer Aufnahme steigt die Sicherheit gegen Bruch.
6.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, Ø 6.6 mm, 118°, black, DIN 338 The Twist Drill Type N is a short High Speed Steel drill designed for precision metal drilling on Drilling Machines and handheld drills. Short design for higher stability HSS material for reliable metal drilling DIN 338 conformity for consistent quality 118° point angle for improved centring Black colour for easy identification High-performance metal drilling with consistent results The Twist Drill from MetavCUT is engineered for demanding metalworking tasks where precision and stability matter. With a diameter of 6.6 mm and a 118° point angle, this short-version Type N drill enters the material cleanly and reduces wandering on curved or slightly uneven surfaces. The roll-welded HSS construction provides elasticity and durability during standard operations, making it suitable for both unalloyed and alloyed steels as well as non-ferrous metals and selected plastics. The short length reduces deflection and supports repeatable, accurate holes in machining and maintenance work. Robust design and clear standards for safe use Built to the DIN 338 specification for short Twist Drills with cylindrical shank, this tool emphasises repeatability and tool life. The reduced overall length increases rigidity and lowers the risk of bending under load, so feeds and speeds can be applied more aggressively while maintaining hole quality. The short execution also simplifies clamping in conventional chucks and minimises runout. For operators unfamiliar with terms: HSS stands for High Speed Steel, a material balanced for hardness and toughness under typical drilling temperatures. Who benefits and where to use it This Type N short Twist Drill is intended primarily for metalworkers, maintenance technicians and workshop users who require a compact, reliable drill for everyday drilling in metal. It is particularly effective in situations where free-standing reach is limited or where high stiffness prevents chatter. Even small-scale fabrication and repair shops will appreciate the easier handling and better centring behaviour on thin or curved components. If uncertainty remains about suitability for a specific job, MetavCUT and the retailer provide expert guidance to match tooling to the application. Handling tips and safety recommendations To achieve the best results with this short Twist Drill, use appropriate cutting speeds, steady feed and suitable lubricants for the target material. Short drills are less prone to breakage, but correct clamping and alignment remain essential for hole quality. The Type N spiral geometry is optimized for metal; when drilling different materials, adjust speed and lubrication accordingly. If post-processing or reworking is required, the HSS material allows straightforward resharpening to restore tip geometry and extend service life. MetavCUT recommends this Twist Drill for precision metalworking and short-reach drilling; for further technical advice or application-specific recommendations contact METAV Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT Diameter: 6.6 mm Point angle: 118° Total length: 101 mm Spiral length: 63 mm Material: HSS (High Speed Steel) Type: Type N Execution: short Suitable for: Drilling Machine Application: Drills for metal Standard: DIN 338 Colour: black Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and where is the MetavCUT Type N Twist Drill suitable? The MetavCUT Twist Drill Type N is mainly used for machining higher-strength materials and for larger drilling diameters in metalworking. Its short HSS design offers good elasticity and reduced breakage risk for holes under typical workshop conditions. This form is relatively easy to resharpen and withstands higher loads, making it a dependable choice for metal fabrication and repair. Which three drill types exist and how does this Twist Drill compare? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill category and is optimized for steel and non-ferrous metals; it differs from wood or masonry drills in point geometry and flute design, which are tailored to the specific material properties.
6.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N Short, 6.6 mm, 135° Point, HSS‑E, 5% Cobalt‑Alloyed (DIN 338, Fully Ground) The bold Twist Drill Type N short is designed for precision metalworking and offers enhanced stability and wear resistance for use in drilling machines and hand drills. Short design increases stability and precision 5% Cobalt‑alloyed HSS‑E for hard materials 135° point angle for reduced chipping in steel Fully ground flutes for accurate, clean holes Conforms to DIN 338 for short twist drills Optimised strength for demanding metal applications The HSS‑E composition with 5% cobalt gives the short Twist Drill improved hot hardness and wear resistance compared with standard HSS. This makes it particularly suitable for drilling alloyed and unalloyed Steel, Cast Iron, non‑ferrous metals and engineering Plastics. The shorter overall length reduces overhang and flex, resulting in higher concentricity and a lower risk of breakage when working with tougher materials. The combination of material and compact geometry therefore supports longer tool life under higher thermal and mechanical stress. Geometry that produces cleaner, more accurate holes A 135° point angle and fully ground flute geometry ensure reliable centring and a smoother entry into harder workpieces. The CNC grinding of the flute geometry (HSS‑G style) yields sharp cutting edges and a high runout accuracy, which produces precise, burr‑reduced holes. The flute (spiral) length of 63 mm is matched to a total length of 101 mm, optimising chip evacuation while maintaining rigidity. For projects that demand clean, dimensionally accurate bores, this ground short design offers clear advantages over rolled alternatives. Best practice: machines, materials and typical uses Designed as a classic Type N Twist Drill, this short variant is intended primarily for Drilling Machines but is compatible with robust hand drills when used with appropriate clamping and coolant. It excels in general metalworking tasks such as through‑holes in structural components, toolroom operations and maintenance work where stability and repeatable hole quality matter. For stainless steels and other hard alloys, use moderate speeds, steady feed and cooling to exploit the cobalt alloy’s high temperature performance. Handling, cooling and reconditioning guidance To preserve cutting performance, apply suitable cutting fluid for metalworking and avoid excessive speed that raises temperature rapidly. The fully ground tip provides excellent initial cutting action but can be more brittle than rolled designs; controlled feed rates and steady clamping are recommended. When regrinding is required, the ground geometry allows precise resharpening, but attention must be paid to the point angle to retain the 135° profile. For stationary and production environments, recommended use is with coolant and secure fixturing to prevent chipping and extend service life. Strong recommendation: For precision metal drilling tasks choose the MetavCUT Twist Drill Type N short with 5% cobalt‑alloyed HSS‑E for superior stability and durability — for tailored advice or technical support contact METAV Werkzeuge directly via email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or WhatsApp at +49 170 2837271 Designation: Twist Drill (Short, Type N) Brand: MetavCUT SKU: 47066‑FDA Diameter: 6.6 mm Point angle: 135° Type: Type N Colour / Composition: 5% cobalt‑alloyed Execution: Short Material: HSS‑E Shaft finish: Fully ground Spiral (flute) length: 63 mm Total length: 101 mm Model series: Standard Line Standard / Norm: DIN 338 Suitable for: Drilling Machine (Hand Drill compatible with precautions) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and when is a short Type N advantageous? The MetavCUT Twist Drill Type N short is used primarily for machining metal; its short geometry gives increased stability and is therefore advantageous for precision holes in harder materials and applications where reduced overhang prevents bending and breakage. Which three main drill types exist? Common distinctions are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for metalworking tasks. Can the MetavCUT Twist Drill be used in a hand drill? The MetavCUT Twist Drill Type N short can be used in a robust hand drill, but optimal results are achieved with a drilling machine; secure clamping and coolant are recommended to prevent chatter and extend tool life. Why is the tip of a twist drill ground (pointed)? The ground point on the MetavCUT Twist Drill reduces the chisel edge at the tip, lowering friction and required feed forces while improving centring in the workpiece, which results in easier penetration and more accurate holes.
6.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombination aus kurzer Ausführung und HSS-G sorgt für mehr Stabilität und höhere Schneidleistung beim Bohren in Stahl; Präzise Bohrbilder und schnelle Spanabfuhr machen den Einsatz in Werkstatt und Industrie effizient. Bestellbar direkt über Metav mit technischer Beratung per eMail oder Telefon. Spiralbohrer von MetavCUT (kurze Ausführung, HSS-G) Der Spiralbohrer ist als kurze, geschliffene Ausführung für präzise Metallbohrungen konzipiert und eignet sich besonders für Stahl, Guss und Nichteisenmetalle. Kurze Ausführung für höhere Stabilität Geschliffene HSS-G Oberfläche für scharfe Schneiden 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft gemäß DIN 338, rollstabil Geeignet für Handbohrmaschine und stationäre Maschinen Mehr Stabilität durch kurze Bauform für präzisere Ergebnisse Die kurze Ausführung reduziert die Auskraglänge und verringert damit Vibrationen und Verformung beim Bohren. Das bedeutet ein ruhigeres Laufverhalten, geringere Ausschläge und sauberere Bohrlöcher. Bei der Bearbeitung von Stahl und Temperguss führt die höhere Steifigkeit zu gleichmäßigeren Bohrdurchmessern und reduziert den Bedarf an Nacharbeiten. Effiziente Schneidleistung dank HSS-G und 135° Spitzenwinkel Das Material HSS-G kombiniert Zähigkeit mit hoher Warmhärte, die geschliffene Oberfläche sorgt für sehr scharfe Kanten. In Kombination mit dem 135° Spitzenwinkel ergibt sich eine schnellere Anbohrung bei harten Werkstoffen und eine bis zu 40 % höhere Vorschubleistung bei reduziertem Anpressdruck. Bei stationärem Einsatz empfiehlt sich Kühlung, um Standzeit und Oberflächenqualität zu optimieren. Praktische Einsatzfelder und Maschinenkompatibilität Mit einem Durchmesser im Standard-Bereich ist dieser Bohrer ideal für Werkstatt, Montage und allgemeine Metallbearbeitung. Er eignet sich für Dünn‑ bis Mittelbleche, Profile, Aluminium und diverse Stahlgüten. Für tiefe Sacklochbohrungen oder sehr dünnwandige Bauteile sollten alternative Verfahren oder Vorbohrungen geprüft werden, um Bruch und Versatz zu vermeiden. Normkonformität, Schaft und Anwendungshinweise für saubere Löcher Die Ausführung entspricht DIN 338 als kurzer Spiralbohrer mit Zylinderschaft; die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit. Empfehlung: Vorbohren bei Bedarf, geeignete Kühlschmierstoffe verwenden und bei stationären Maschinen moderate Schnittgeschwindigkeiten wählen, um die Lebensdauer zu maximieren. Setzen Sie auf den MetavCUT Spiralbohrer in kurzer Ausführung für zuverlässige Stahlbohrungen — Bestellungen und technische Beratung direkt bei Metav: info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 45066-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Fakten Durchmesser: 6,6 mm Gesamtlänge: 101 mm Spirallänge: 63 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen, hohe Schärfe) Schaftausführung: geschliffen (Zylinderschaft, hohe Rundlaufgenauigkeit) Ausführung: kurz (reduzierte Auskraglänge) Typ: Typ N (Normalspirale) Für Bohrmaschine: Handbohrmaschine Farbe: blank (bright finished) FAQ Für welche Materialien eignet sich der Bohrer besonders? Der MetavCUT Spiralbohrer aus HSS-G ist besonders geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und harte Kunststoffe; die Kombination aus geschliffener Geometrie und 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe. Ist der Bohrer für handgeführte Akkubohrmaschinen geeignet? Ja, der Bohrer ist für die Nutzung in Handbohrmaschine geeignet; aufgrund der kurzen Ausführung empfiehlt sich dennoch eine stabile Maschinenführung und gegebenenfalls Anpunkten, um Wandern beim Anbohren zu vermeiden. Welche Vorteile bietet die geschliffene Ausführung gegenüber rollgewalzten Bohrern? Geschliffene HSS-G Bohrer liefern sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was sauberere Bohrbilder und präzisere Passungen ermöglicht; als Nachteil ist erhöhte Sprödigkeit möglich, daher ist Kühlung und stationärer Einsatz vorteilhaft. Wie verhält sich der Bohrer bei tiefen Bohrungen? Bei Bohrungen, die deutlich tiefer als das Fünffache des Durchmessers sind, kann die Spanabfuhr kritisch werden; für tiefe Löcher sind gestufte Aufbohrverfahren oder spezielle lange Ausführungen empfehlenswert. Welche Norm und Serie hat das Produkt? Der Bohrer entspricht DIN 338 und gehört zur Standard Line von MetavCUT; die Artikelnummer lautet 45066-FDA.
6.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT vereint HSS-G-Schneidstoff, geschliffene Präzision und einen 135° Spitzenwinkel für anspruchsvolle Metallarbeiten. Die kompakte Bauform reduziert Vibrationen und erhöht die Stabilität bei Hand- und stationärem Bohren; dadurch werden saubere Bohrbilder und längere Standzeiten erzielt. Bestellen Sie direkt über Metav oder kontaktieren Sie uns bei Fragen zur Anwendung. Spiralbohrer von MetavCUT — Profi Line, kurzer HSS-G Bohrer Spiralbohrer von MetavCUT, kurze Ausführung, für präzise Bohrungen in Metall bei Hand- und Maschinenbetrieb Kurzversion nach DIN 338 für mehr Stabilität Geschliffener HSS-G für saubere, präzise Bohrungen 6,6 mm Durchmesser, ideal für Standard-Metallarbeiten 135° Spitzenwinkel für härtere Werkstoffe Zylinderschaft für Handbohrmaschine, Gesamtlänge 109 mm Robuste Materialwahl für präzise Metallbearbeitung Der Einsatz von HSS-G als Schneidstoff sorgt für hohe Schneidhaltigkeit und Temperaturbeständigkeit bei Bohrungen in legierten und unlegierten Stahl. Die geschliffene Ausführung führt zu sehr scharfen Schneiden und hoher Rundlaufgenauigkeit, was saubere Bohrbilder ermöglicht. Dieser Vorteil reduziert Nachbearbeitung und erhöht die Effizienz bei wiederkehrenden Metallarbeiten. Kurze Bauform steigert Stabilität und Standzeit Die kurze Ausführung mit reduzierter Auskraglänge minimiert Durchbiegung und Vibration, wodurch Stabilität und Führung bei Handbohrmaschinen sowie stationären Maschinen deutlich verbessert werden. Für Anwender bedeutet das weniger Bruchrisiko und zuverlässigere Ergebnisse, besonders beim Bohren in harten Werkstoffen wie Temperguss oder Gusseisen. Geometrie und Spitzenwinkel für härtere Werkstoffe Der 135° Spitzenwinkel reduziert das Ausbrechen an der Einlaufkante und erleichtert das Anbohren von Edelstahl und hartem Stahl. In Kombination mit der Typ-N-Normalspirale ergibt sich ein ausgewogenes Eindringverhalten, das präzise Zentrierung und kontrollierten Spanabtransport unterstützt. Dadurch lassen sich definierte Bohrpassungen ohne übermäßigen Vorschub erzielen. Anwendungsbereiche und Zielgruppe Konzipiert für den Einsatz in Werkstatt und Industrie eignet sich dieser Bohrer besonders für Metallbearbeitung, Maschineninstandhaltung und Montagearbeiten. Die Ausführung empfiehlt sich für Anwender, die Wert auf Präzision und Wiederholgenauigkeit legen, etwa in der Metallverarbeitung, im Maschinenbau und bei anspruchsvollen Reparaturarbeiten. Hinweise zu Einsatz und Kühlung Bei stationärem Bohren in dichten Werkstoffen empfiehlt sich Kühlung zur Vermeidung von Überhitzung und zur Verlängerung der Standzeit. Durch den geschliffenen Schaft ist der Bohrer für präzise Einsätze vorgesehen; bei Handgebrauch auf festsitzende Spindelaufnahme und kontrollierten Vorschub achten. Eine angemessene Schmierung reduziert Werkzeugverschleiß und sorgt für konstante Bohrergebnisse. Empfehlung: Vertrauen Sie auf die Profi Line von MetavCUT mit HSS-G und kurzer Bauform für stabile, präzise Metallbohrungen — bei Fragen zur Anwendung erreichen Sie uns per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 48066-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Typ: Typ N Norm: DIN 338 Material: HSS-G Schaft-Ausführung: geschliffen Farbe: blank Verpackungseinheit: 10 Daten Durchmesser: 6,6 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten kurze Ausführung Zylinderschaft Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall geschliffen (HSS-G = geschliffen) DIN 338 definiert kurze Spiralbohrer mit Zylinderschaft FAQ Ist dieser Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT aus HSS-G mit 135° Spitzenwinkel ist gut geeignet für das Anbohren von härteren Werkstoffen wie Edelstahl; bei längeren Bohrungen Kühlung und moderater Vorschub empfehlen. Welche Aufnahme passt für den Schaft? Der geschliffene Zylinderschaft des MetavCUT Spiralbohrers passt in handelsübliche Spannfutter von Handbohrmaschinen und stationären Bohrmaschinen mit entsprechender Aufnahme. Wie viele Bohrer sind in einer Verpackungseinheit? Die Verpackungseinheit enthält 10 Stück; die SKU lautet 48066-FDA und gehört zur Serie Profi Line von MetavCUT. Eignet sich der Bohrer für Blindlöcher und lange Bohrungen? Wegen der kurzen Bauform und der Spirallänge von 69 mm ist der Bohrer besonders für kürzere, präzise Bohrungen geeignet; für tiefe Sacklochbohrungen werden längere Ausführungen empfohlen. Welche Vorteile bietet die geschliffene Ausführung gegenüber gewalzten Bohrern? Geschliffene Bohrer der Serie Profi Line bieten höhere Schärfe und Rundlaufgenauigkeit, was präzisere Bohrungen in Metall ermöglicht; sie können jedoch empfindlicher gegenüber Krafteinleitung sein und profitieren von kontrollierter Anwendung und Kühlung.
6.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise und geschliffene HSS‑G Geometrie sorgen für präzise Bohrbilder und reduzierte Vibration; die kurze Ausführung erhöht die Stabilität bei harten Werkstoffen. Nutzen Sie die Kombination aus Schnittleistung und Führungssicherheit für zuverlässige Metallbearbeitung und bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – kurzer HSS‑G Metallbohrer Der Spiralbohrer ist eine kurze HSS‑G Ausführung für präzises Bohren in legierten und unlegierten Stahl sowie Gusswerkstoffe. Kurze Ausführung für hohe Stabilität HSS‑G geschliffen für scharfe Kanten Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft nach DIN 338 Geeignet für Handbohrmaschine und stationäre Maschinen Stabile Konstruktion für exakte Bohrungen und lange Standzeit Die kurze Auskraglänge reduziert Schwingung und erhöht die Stabilität beim Eindringen in harte Materialien. Durch die geschliffene Schaftausführung entsteht eine sehr gute Rundlaufgenauigkeit, was zu sauberen Bohrlöchern und geringer Nachbearbeitung führt. Für Anwender bedeutet das weniger Werkzeugwechsel, gleichmäßige Passungen und eine bessere Fertigungsqualität bei Serien in kleiner bis mittlerer Losgröße. HSS‑G Material: Schnellere Schnitte bei geringerer Anpresskraft Das HSS‑G Material kombiniert hohe Härte mit zäher Zähigkeit und ermöglicht deutlich höhere Schnittgeschwindigkeiten als Standard HSS. Die geschliffene Geometrie sorgt für scharfe Schneidkanten, was bis zu 40 % schnellere Bohrungen und bis zu 50 % geringere Anpresskraft erlaubt. Damit lassen sich legierte Stähle, Gusseisen und Nichteisenmetalle effizient bearbeiten, ohne unnötig viel Wärme in das Werkstück einzubringen. Präzise Geometrie und Spitzenauslegung für harte Werkstoffe Der Spitzenwinkel 135° ist speziell auf schwer zerspanbare Werkstoffe ausgelegt und reduziert das Ausreißen beim Anbohren. Die Normalspirale Typ N bietet einen ausgewogenen Spantransport und eignet sich gut für die Bearbeitung von Stahl und Eisen. Anwender profitieren von einem schnellen Anbohren und gleichmäßigem Spanabfluss, was die Standzeit der Schneide positiv beeinflusst. Einsatzgebiet und Maschinentauglichkeit im Überblick Die kurze Ausführung wurde für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert und ist nach DIN 338 klassifiziert, wodurch sich eine verlässliche Maßhaltigkeit und Austauschbarkeit ergibt. Für Serienbearbeitung an Säulenbohrmaschinen oder für präzise Werkstattaufgaben ist dieser Kurzbohrer eine wirtschaftliche Wahl, sofern Kühlung und geeignete Drehzahlen beachtet werden. Empfehlen wir die MetavCUT Standard Line HSS‑G Kurzbohrer für professionelle Metallbearbeitung; für Verfügbarkeit und persönliche Beratung erreichen Sie uns per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Daten Artikelnummer: 450675-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Fakten Durchmesser: 6,75 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten Material: HSS‑G (G = geschliffen) Schaftausführung: geschliffen (Zylinderschaft) Typ: Typ N (Normalspirale für Metall) Einsatz: Handbohrmaschine / stationäre Maschine Farbe: blank Normhinweis: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der MetavCUT Spiralbohrer in HSS‑G Ausführung wurde für legierte und unlegierte Stähle, Gussstahl, Gusseisen sowie Nichteisenmetalle entwickelt und bietet mit 135° Spitzenwinkel besonders gute Ergebnisse bei harten Werkstoffen. Kann der Spiralbohrer mit einer Handbohrmaschine verwendet werden? Ja, der Spiralbohrer ist für die Nutzung an Handbohrmaschine geeignet; die kurze Ausführung erhöht die Stabilität und reduziert das Risiko von Verbiegen bei Handbetrieb. Was bedeutet HSS‑G und welchen Vorteil bietet es? HSS‑G steht für Schnellarbeitsstahl geschliffen; die geschliffene Geometrie liefert sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzise Bohrbilder und schnellere Bohrprozesse ermöglicht. Wie unterscheidet sich diese Ausführung von einem langen Bohrer? Die kurze Ausführung reduziert Schwingung und erhöht die Führung, wodurch präzisere Löcher und längere Standzeiten bei hartem Material erzielt werden im Vergleich zu Langbohrern mit größerer Auskraglänge. Ist die Artikelnummer 450675-FDA relevant für die Bestellung? Ja, die SKU 450675-FDA identifiziert genau diesen MetavCUT Spiralbohrer in der Standard Line und vereinfacht Nachbestellungen und Rückfragen.
6.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 6.7 mm, HSS, 118° Tip, Short, Black, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS metalworking drill designed for Drilling Machines, delivering precise, stable holes in steel and other metals. Type N Twist Drill for metalworking HSS Material for high wear resistance 6.7 mm Diameter for precise holes 118° Tip for reliable centring Short design per DIN 338 for maximum stability Durable High-Speed Steel for demanding metalwork HSS (High Speed Steel) gives this Twist Drill excellent elasticity and wear resistance under demanding conditions. Because HSS is manufactured to withstand high cutting temperatures, the drill maintains edge hardness during continuous use, which reduces the risk of breakage when drilling holes below 6 mm diameter and improves service life on larger diameters. This material choice supports consistent performance when working with alloyed and unalloyed steel, cast iron, non-ferrous metals and many Plastics. Precise centring and consistent hole quality The 118° tip angle is optimised for softer to medium-hard materials and helps the drill to centre reliably on slightly curved or uneven surfaces. A smaller tip angle reduces the initial bite and lowers the required feed force, which improves control during start-up and produces cleaner holes with reduced burr formation. For applications demanding tight tolerances, the short flute length and robust geometry contribute directly to repeatable, accurate results. Designed for professional metalworkers and workshops Engineered for workshop environments and machine use, this short Twist Drill offers increased rigidity and less deflection during operation. The compact configuration makes it suitable for precision jobs on lathes, pillar drills and other Drilling Machines where stability is essential. Professionals who prioritise accuracy and tool durability benefit from the combination of short design and HSS construction. Standards, type and practical advantages explained Compliant with DIN 338, this short Twist Drill follows the standard for short cylindrical-shank HSS drills and therefore matches common expectations for fit and performance. The designation Type N indicates the Normal spiral profile, a classic geometry optimised for metal drilling. Shorter overall length reduces chatter and improves concentricity; this makes the tool especially practical for applications where bending of the drill must be avoided and precise alignment is required. Strong recommendation: For reliable, accurate metal drilling choose the MetavCUT Twist Drill Type N with HSS construction and DIN 338 short design — for technical questions or personalised advice contact METAV Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40067-FDA Typ: Typ N Durchmesser: 6.7 mm Spitzenwinkel: 118° Spirallänge: 63 mm Gesamtlänge: 101 mm Material: HSS Norm: DIN 338 Ausführung: short Farbe: black Anwendung: Drills for metal Suitable for: Drilling Machine Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is especially suited to high-strength materials and larger diameters because its form is simple to regrind and withstands higher loads, making it a reliable choice for demanding metalworking tasks. Which three drill types exist? The three common drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal-drill category and is optimised for metalworking applications. Why are Twist Drills pointed? The point grind reduces the cross-cutting edge at the tip of the Twist Drill, which lowers friction and therefore decreases required feed forces; at the same time a pointed tip improves centring in the workpiece for more accurate drilling. Can a Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically worse than with a dedicated wood drill; however, metal drills are easier to regrind and exhibit lower self-feed, which can be an advantage in some situations.
6.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
MetavCUT Twist Drill – Type N, Short, 6.7 mm, 135° Tip, 5% Cobalt-alloyed, HSS‑E, DIN 338 The MetavCUT Twist Drill is a short Type N metal drill designed for precise work in drilling machines, featuring a 6.7 mm diameter, a 135° tip angle and a 5% cobalt‑alloyed HSS‑E construction for enhanced heat resistance. Short design for improved stability and accuracy 135° tip for reliable entry in hard materials 5% cobalt‑alloyed HSS‑E for higher heat resistance Fully ground flutes for precise roundness and clean holes Conforms to DIN 338 for short twist drills Short design that reduces deflection and improves hole quality Thanks to its short Execution the drill offers a reduced overhang from the chuck, which increases Stability and minimises bending during machining. This results in cleaner Holes and better concentricity when working with metals. The reduced free length is particularly beneficial for operations that demand repeatable precision and lower runout on drilling machines. Materials and geometry tuned for hard metals The combination of HSS‑E material with 5% cobalt and a 135° Tip Angle improves wear resistance and thermal stability during high‑temperature cutting. A larger tip angle shortens initial penetration and spreads cutting forces, making this tool suitable for stainless steel and other harder alloys where conventional angles can cause chatter or premature wear. Ground flutes and DIN 338 quality for accurate machining The fully ground flute geometry (HSS‑G style) ensures sharp cutting edges and tight dimensional tolerance, producing precise, burr‑reduced bores. As a DIN 338 short twist drill, manufacturing tolerances and shank dimensions comply with the standard, which supports consistent clamping and repeatable results in production environments. Recommended 사용 and handling for best results For optimal performance fit the tool into a stable drilling machine and apply adequate coolant when machining steel or stainless alloys. The flute length of 63 mm and an overall length of 101 mm provide a balance between reach and rigidity for a 6.7 mm diameter. Use moderate feed rates and maintain concentric clamping to exploit the Short Design and avoid excessive side forces that may lead to chipping. Target users and typical applications Engineers, toolroom technicians and maintenance professionals benefit from the MetavCUT Standard Line short twist drill when drilling holes in alloyed and unalloyed steel, cast iron, non‑ferrous metals and engineering plastics. The tool is aimed at users who prioritise accuracy, repeatability and straightforward regrindability for maintenance and repair tasks. Strong recommendation: choose the MetavCUT Standard Line Twist Drill for precision metalworking; for advice on suitability, alternative geometries or cutting data contact METAV Werkzeuge — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill (Short Spiral Drill) Brand: MetavCUT SKU: 47067-FDA Diameter: 6.7 mm Tip angle: 135° Type: Type N Material: HSS‑E (5% Cobalt‑alloyed) Execution: Short Shank finish: Fully ground Flute length: 63 mm Overall length: 101 mm Colour / Alloy note: 5% cobalt‑alloyed For drilling machine: Drilling Machine (Handheld machines possible with care) Model series: Standard Line Standard: DIN 338 Application: Drills for metal Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily applied to the machining of high‑strength metals and larger drill diameters; its short design and robust HSS‑E composition make it suitable for precise metal drilling tasks where stability and wear resistance are required. Which three drill types exist? In general drill classification there are three main groups: metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal‑drill category and is optimised for metalworking on drilling machines. Why are Twist Drills point‑ground? Point grinding reduces the web thickness at the tip of a twist drill, decreasing friction and lowering the required feed forces; as a result the drill centres more reliably in the workpiece and needs less thrust, which improves entry accuracy for the MetavCUT Twist Drill.
6.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — short HSS‑G, 6.7 mm, 135° (Type N, DIN 338), bright‑finished A Twist Drill from MetavCUT for precise metal drilling in Drilling Machines, optimised as a short execution for stability and clean holes. Short design for high drilling stability HSS‑G ground geometry for sharper cutting edges 135° point angle suited to harder materials Fully ground shank for improved concentricity Manufactured to DIN 338 for short twist drills Precision and strength for demanding metalwork The Twist Drill in HSS‑G combines a hardened cutting geometry with a 135° point angle to improve entry into tougher materials. With a diameter of 6.7 mm, this Type N drill offers the classic normal spiral geometry that is particularly effective for metalworking. The ground flute profile produces consistent chips and clean bore finishes, so holes in alloyed and unalloyed steel, cast materials and non‑ferrous metals show reduced burring and improved dimensional accuracy. Short length for greater stability and faster operation Designed as a short execution, the spiral length of 69 mm and an overall length of 109 mm limit overhang and minimise bending. This higher rigidity translates into more stable drilling and better concentricity when used in Drilling Machines. The ground HSS construction enables significantly increased feed performance — the manufacturer notes drilling speeds up to 40% faster and reduced required feed force — making the tool ideal where rapid, accurate holes in hard materials are required. Ground geometry and conformity to standards for predictable results The fully ground manufacture (HSS‑G) creates sharp cutting edges and high run‑out accuracy, while the Type N normal spiral provides reliable chip evacuation for metal applications. Conformance with DIN 338 means the drill adheres to standardised dimensions and tolerances for short twist drills with cylindrical shanks. For workshop use, the ground design improves centre accuracy but can be more brittle than rolled variants, hence machining with appropriate coolant and controlled feed is recommended. Best uses, material compatibility and handling recommendations This short Twist Drill is intended primarily for metal: alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast components, Non‑Ferrous Metals and Hard Plastics. Use in stationary or mobile Drilling Machines is supported; for the best lifetime keep a steady feed, apply suitable cutting fluid and avoid excessive lateral loads. The bright‑finished surface and fully ground shank ensure easy seating in the chuck and consistent concentricity for precision operations. Strong recommendation: MetavCUT Twist Drill Type N for precision metal drilling — METAV Werkzeuge offers expert advice and technical support; contact via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45067-FDA Diameter: 6.7 mm Spiral Length: 69 mm Overall Length: 109 mm Point Angle: 135° Type: Type N Material: HSS‑G (ground) Shank Finish: Fully ground Execution: Short Colour: Bright‑finished Standard: DIN 338 Application: Drills for metal Model Series: Standard Line For Drilling Machine: Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the MetavCUT Twist Drill (Type N)? The MetavCUT Twist Drill Type N is primarily used for metalworking; it is designed for drilling high‑strength materials and larger metal diameters where a robust, normal spiral geometry provides consistent chip removal and reliable hole quality. Can the MetavCUT Twist Drill be used for different metals and plastics? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Cast components, Non‑Ferrous Metals and Hard Plastics, with best results when used with appropriate coolant and controlled feed. For what tasks are Twist Drills used? Twist Drills are mainly applied when machining high‑strength materials and larger bore diameters; their geometry is relatively simple to resharpen and they withstand considerable loads, making them a common choice for robust metal drilling tasks. Which three drill types exist? The three main drill types are Metal Drills, Wood Drills and Masonry/Concrete Drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the web thickness at the tip of the Twist Drill, significantly lowering friction and the required feed force; this also improves centring of the tip in the workpiece for more accurate starts. Can a metal twist drill be used to drill wood? A Metal (HSS) drill can be used in wood, but guidance is poorer and hole edges are less clean; however, metal drills are easier to resharpen and typically exhibit lower self‑feed behaviour.
6.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die kurze Ausführung kombiniert Stabilität und Präzision: reduzierte Auskraglänge minimiert das Verbiegen, der HSS-G-Werkstoff sorgt für scharfe Schnittkanten, und der Spitzenwinkel von 135° erleichtert das Anbohren harter Werkstoffe. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung an, wenn Sie spezifische Anwendungen planen. Spiralbohrer — kurzer HSS-G-Bohrer für Metall Der Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen mit geschliffener Geometrie und Zylinderschaft MetavCUT Profi Line Spiralbohrer Kurze Ausführung für höhere Stabilität beim Bohren Material HSS-G (geschliffen) für präzise Bohrungen Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und Werkstattbetrieb Kompakte Bauform erhöht Standfestigkeit und Präzision Die kurze Ausführung reduziert die Auskraglänge und verbessert dadurch die Stabilität beim Bohren. Das führt zu weniger Vibrationen und geringerer Neigung zum Verbiegen, was besonders bei Bohrungen in Stahl oder Gusseisen die Qualität der Bohrung erhöht. Anwender profitieren von saubereren Bohrlöchern und höherer Wiederholgenauigkeit bei stationärer oder handgeführter Bearbeitung. Materialwahl und Schneidverhalten für Metallbearbeitung Der Einsatz von HSS-G kombiniert Härte und Schnitthaltigkeit mit hoher Oberflächengüte durch CNC-Schliff. Die geschliffene Geometrie erzeugt scharfe Kanten, die saubere Späne und präzise Bohrbilder ermöglichen. In Verbindung mit dem Spitzenwinkel 135° eignet sich diese Ausführung besonders für legierte und unlegierte Stähle sowie für Edelstahl, da das Anbohren erleichtert wird und das Werkzeug stabiler in harten Werkstoffen arbeitet. Kompatibilität mit Werkzeugen und typischen Anwendungen Dieser Bohrer ist für Anwendungen im Standard-Bereich konzipiert und eignet sich für Werkstatt, Montage und DIY-Projekte. Die Kombination aus Zylinderschaft und robuster Ausführung erlaubt die Nutzung in Handbohrmaschine und stationären Maschinen. Für hochpräzise Passungen sollte jedoch vor dem Bohren angesenkt oder mit einem Zentrierbohrer gearbeitet werden, um ein Wandern des Bohrers zu vermeiden. Verarbeitungsempfehlungen und praktische Hinweise Bei der Verwendung von geschliffenen Bohrern empfiehlt sich der Einsatz von Kühlschmierstoff, insbesondere bei zähen oder wärmeleitfähigen Werkstoffen, um Überhitzung und vorzeitigen Verschleiß zu vermeiden. Die geschliffen Ausführung liefert hohe Rundlaufgenauigkeit, ist jedoch empfindlicher gegen seitliche Belastung als walzgefertigte Bohrer; deshalb ist ruhige Führung und geeignete Aufnahme wichtig für eine lange Werkzeugstandzeit. Empfehlung: Für präzise Metallbohrungen die MetavCUT Profi Line HSS-G Kurzvariante wählen und bei Metav anfragen — eMail: info@metav-werkzeuge.com / Telefon: +49 2822 7131930 Produktmerkmale Artikelnummer: 48067-FDA Marke: MetavCUT Serie: Profi Line Bezeichnung: Spiralbohrer Zahlen Durchmesser: 6,7 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen) Schaftausführung: geschliffen, Zylinderschaft Norm: DIN 338 Typ: Typ N Farbe: blank Für Bohrmaschine: Handbohrmaschine Ausführung: kurz FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer mit HSS-G eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoffe und bietet dabei saubere Bohrbilder. Ist der Bohrer für die Nutzung in einer Handbohrmaschine geeignet? Ja, die kurze Ausführung des MetavCUT Profi Line Spiralbohrers wurde speziell für den Einsatz in Handbohrmaschine und Werkstatt entwickelt und reduziert die Neigung zum Verbiegen. Was bedeutet HSS-G und welchen Vorteil bietet es? HSS-G steht für geschliffenen Schnellarbeitsstahl; die geschliffene Geometrie sorgt für sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was präzise Bohrungen in harten Werkstoffen ermöglicht. Warum ist der Spitzenwinkel 135° wichtig? Ein Spitzenwinkel von 135° erleichtert das Anbohren harter Werkstoffe und verringert das Fransen beim Eintritt; das verbessert die Bohrbildqualität insbesondere in Edelstahl und gehärteten Stählen. Entspricht der Bohrer einer Norm und welche Ausführung ist das? Der Spiralbohrer erfüllt die Norm DIN 338 und ist in kurzer Ausführung mit Zylinderschaft gefertigt, was ihm höhere Stabilität und Eignung für präzise Metallbohrungen verleiht.
6.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, 6.8 mm, 118° tip, black, DIN 338, MetavCUT The Twist Drill is a short Type N HSS drill designed for precise metal drilling, suitable for use in Hand Drills and Drilling Machines for demanding, stable holemaking. Short HSS Twist Drill for high stability 6.8 mm Diameter for Precise Metal Holes 118° Tip Angle for reliable centring DIN 338 compliant, Type N metal drill Black finish, 109 mm Overall Length Greater Precision and Less Wander for Metalworking A shorter cutting length gives this bit superior stability and reduced deflection when compared with longer counterparts. The compact geometry of the Twist Drill minimises vibration and provides a steadier bore in steel and other metals, which results in cleaner holes and less rework. For operators who value repeatable accuracy, the short design translates directly into faster setup and higher first-pass yield. High-Speed Steel Explained — Durability for Standard Tasks Made from HSS (High Speed Steel), the drill offers good edge retention and resilience under typical metalworking loads. HSS is produced to withstand elevated temperatures during cutting, and because this bit is roll-walden in manufacturing, it combines elasticity with lower fracture risk on holes below 6 mm; at 6.8 mm the material still benefits from HSS properties for alloyed and unalloyed steels, cast iron, non-ferrous metals and many plastics. The 118° tip angle supports easier penetration in softer metals and improves the initial centring action. Practical Use: Who Benefits from This Bit This Type N Twist Drill is aimed at professional workshops and skilled hobbyists who perform precision drilling in metal components. Its properties make it suitable for maintenance tasks, component fabrication and retrofit work where a robust short bit reduces chatter and slotting. Because the bit follows DIN 338 specifications, users who demand standardised geometry and interchangeability will find it simple to integrate into existing toolsets and workflows. Standard Compliance and Design Advantages Conforming to DIN 338, the short configuration and cylindrical shank enable easy clamping and consistent concentricity in chucks of Hand Drills and Drilling Machines. The 63 mm spiral length and 109 mm overall length balance chip evacuation with rigidity, while the 118° Tip Angle helps with centring on slightly rounded surfaces and reduces the risk of walking. The black surface finish aids in visibility and handling without affecting cutting performance. We recommend MetavCUT’s Twist Drill Type N as the dependable choice for precise metal drilling — for expert advice or to ensure the tool matches your specific application, contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40068-FDA Diameter: 6.8 mm Tip Angle: 118° Spiral Length: 63 mm Overall Length: 109 mm Execution: Short Type: Type N Material: HSS Standard: DIN 338 Colour: Black Application: Drills for Metal For: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The MetavCUT Twist Drill Type N is primarily used for drilling in high-strength materials and larger diameters; it is well suited to metalworking tasks. Its shape is easy to regrind and withstands heavy loads, which makes it a reliable choice for workshop and industrial applications. Which three drill types exist? Common drill types are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for steel and similar materials. Why are Twist Drills re-pointed? Re-pointing reduces the chisel edge at the tip of the Twist Drill, significantly lowering friction and thus the required feed forces. At the same time the re-pointed tip improves centring in the workpiece. Can a metal Twist Drill be used in wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to resharpen and have less self-feeding action. For which drilling depths is the Twist Drill most used? A through-hole in solid material is typically executed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general belief that HSSE is always superior to HSS is incorrect. When choosing between HSS and HSSE for a MetavCUT Twist Drill, evaluate the working conditions carefully to decide whether the higher cost of HSSE is justified.
6.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Der kurze HSS-E Spiralbohrer kombiniert Stabilität, Haltbarkeit und hohe Bohrgenauigkeit für Metallarbeiten; die 5% Kobaltlegierung und der geschliffene Schaft reduzieren Bruchrisiken und sorgen für saubere Bohrbilder. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT — HSS‑E, 6,8 mm, kurze Ausführung Der Spiralbohrer von MetavCUT ist eine kurze HSS‑E Ausführung mit 5% Kobalt, ausgelegt für präzise Bohrungen in legierten und unlegierten Stählen. Kurze Ausführung für hohe Stabilität HSS‑E mit 5% Kobalt für zähe Werkstoffe Geschliffener Schaft für präzisen Rundlauf Spitzenwinkel 135° reduziert Anbohrverzug Entspricht DIN 338 für kurze Spiralbohrer Hohe Stabilität für präzise Metallbohrungen Dank der kurzen Ausführung reduziert sich die Auskraglänge deutlich, wodurch das Verbiegen und Vibrieren beim Bohren minimiert wird. Das Ergebnis sind sauberere Bohrlöcher und geringerer Werkzeugverschleiß bei stationären Säulenbohrmaschinen und Handbohrmaschinen. Für Durchmesser im Standard‑Bereich von 2,0 mm bis 13,0 mm eignet sich diese Ausführung besonders gut, da direktes Bohren möglich ist und die Stabilität die Vorschubkontrolle erleichtert. Materialeigenschaften und Schneidvorteile bei harten Werkstoffen Der Einsatz von HSS‑E mit 5% Kobalt erhöht die Warmfestigkeit und Zähigkeit, sodass der Bohrer auch bei höheren Schnitttemperaturen bessere Standzeiten liefert. Die geschliffene Fertigung sorgt für sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was saubere Bohrbilder in Stahl, Gusseisen und Nichteisenmetallen ermöglicht. Beachten Sie, dass geschliffene Bohrer empfindlicher gegenüber Stoßbelastung sind und bei Bedarf Kühlung verwenden, um Bruch zu vermeiden. Empfohlene Anwendungen und Praxis‑Tipps Die kurze Spiralform ist für allgemeine Werkstatt‑ und Montagearbeiten konzipiert und eignet sich für Handbohrmaschine und stationäre Maschinen gleichermaßen. Vorbohren vor hochwertigen Passungen erhöht die Präzision, und bei tiefen Löchern ist mehrstufiges Aufbohren empfehlenswert. Für beste Ergebnisse Anbohren mit Zentrierbohrer, moderate Vorschubgeschwindigkeiten wählen und bei harten Werkstoffen Kühlmittel einsetzen, um Standzeit und Bohrbild zu optimieren. Für wen sich diese Ausführung lohnt Ambitionierte Heimwerker und professionelle Anwender profitieren gleichermaßen von der Kombination aus Stabilität, Zähigkeit und Präzision. Die Standard Line Ausführung bietet eine verlässliche Lösung für wiederkehrende Metallarbeiten, bei denen saubere Bohrlöcher und lange Werkzeugstandzeiten gefragt sind. MetavCUT liefert mit dieser Variante eine robuste Grundlage für industrielle und handwerkliche Einsätze. Empfehlung: Die MetavCUT Standard Line kurze HSS‑E Ausführung mit 5% Kobalt wählen für langlebige, präzise Metallbohrungen — Bestellbar über Metav Werkzeuge; bei technischen Fragen: info@metav-werkzeuge.com oder +49 2822 7131930 Produktmerkmale Artikelnummer: 47068‑FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Material: HSS‑E Ausführung: kurz Verpackungseinheit: 10 Fakten Durchmesser: 6,8 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Farbe: 5% Kobaltlegiert Typ: Typ N (Normalspirale für Metall) Für Bohrmaschine: Handbohrmaschine HSS‑E: Schnellarbeitsstahl mit Kobaltanteil für erhöhte Zähigkeit FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer Standard Line (HSS‑E, 5% Kobalt, SKU 47068‑FDA) eignet sich für legierte und unlegierte Stähle, Gusseisen sowie Nichteisenmetalle und Kunststoffe; bei harten Werkstoffen Kühlung empfehlen. Kann der Bohrer mit einer Handbohrmaschine eingesetzt werden? Ja, die kurze Ausführung wurde gerade für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert und bietet durch die geringere Auskraglänge hohe Stabilität. Was bedeutet die Kennzeichnung geschliffen bei diesem Spiralbohrer? Geschliffen bezeichnet die Fertigungsart der Spannuten und Geometrie; beim MetavCUT Spiralbohrer führt das zu sehr scharfen Kanten und hoher Rundlaufgenauigkeit, wodurch präzisere Bohrbilder erzielt werden. Warum ist der Spitzenwinkel 135° vorteilhaft? Ein Spitzenwinkel von 135° reduziert das Einklemmen beim Anbohren in harten Werkstoffen und verringert Verkantungs‑ und Ausbruchsrisiken, was saubere Bohrungen in rostfreien und gehärteten Materialien unterstützt. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit für diesen Spiralbohrer beträgt 10 Stück.
6.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der MetavCUT HSS-G Spiralbohrer kombiniert Wirtschaftlichkeit, Stabilität und hohe Bohrgeschwindigkeit für zuverlässige Metallbearbeitung; die kurze Ausführung sorgt für bessere Rundlaufgenauigkeit und reduzierte Bruchgefahr, Bestellungen und technische Beratung sind direkt über Metav erreichbar. Spiralbohrer von MetavCUT – HSS-G Kurzausführung (Ø 6,8 mm) Spiralbohrer kurzausführung für präzises Bohren in Metall mit HSS-G, Typ N und 135° Spitzenwinkel HSS-G geschliffen für hohe Schnittgeschwindigkeit Kurze Ausführung für maximale Stabilität 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 konform, Basic Line Ausführung Hohe Leistung dank geschliffenem HSS-G für zügiges Arbeiten Die geschliffene HSS-G-Güte sorgt für ein bis zu 40 % schnelleres Bohren und benötigt 50 % weniger Anpresskraft gegenüber herkömmlichen HSS-Bohrern. Dadurch wird die Arbeit in legierten und unlegierten Stahlarten effizienter, ohne die Kontrolle zu verlieren. Für Werkstattbetriebe bedeutet das: kürzere Bearbeitungszeiten und weniger Belastung für Maschine und Bediener. Stabilität und Präzision durch kurze Ausführung und geschliffenen Schaft Weil die Auskraglänge reduziert ist, liefert die kurze Bauform eine deutlich höhere Stabilität und geringere Vibrationen beim Bohren in harten Materialien. Das führt zu saubereren Bohrbildern und besseren Toleranzen bei Passungen. Die geschliffene Schaftausführung unterstützt sicheren Halt im Bohrfutter und minimiert ein Verdrehen bei höheren Drehmomenten. Materialvielfalt und Anwendungsempfehlung für Metallbearbeitung Der Bohrer ist ausgelegt für legierten Stahl, unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Der 135° Spitzenwinkel erhöht die Standzeit bei zähen Werkstoffen wie Edelstahl, während die Typ-N-Normalspirale universelle Schneidkanten für viele Metallarten bietet. Für präzise Vorbohrungen empfehlen sich kurze Vorschübe und geeignete Kühlschmierstoffe. Bedienkomfort und Einsatz in der Werkstatt Dieser Kurzbohrer arbeitet zuverlässig in Handbohrmaschine und stationären Bohrmaschinen; die kompakte Länge reduziert das Spiel beim Einspannvorgang. Anwender profitieren von einfacher Handhabung beim Positionieren und geringerem Bruchrisiko bei manueller Führung. Für Serienarbeiten in der Werkstatt empfiehlt sich regelmäßige Kontrolle des Rundlaufs der Spindel zur Maximierung der Standzeit. Zielgruppe und wirtschaftlicher Nutzen für Betriebe Entwickelt für Handwerk, Montage und Kleinserienfertigung, bietet die Basic Line eine kosteneffiziente Lösung für Betriebe, die hohe Präzision ohne übermäßige Investition benötigen. Die Kombination aus Stabilität und hoher Schnittgeschwindigkeit senkt Fertigungskosten und erhöht die Produktivität bei wiederkehrenden Metallbohrungen. Setzen Sie auf Präzision mit dem MetavCUT HSS-G Spiralbohrer und fordern Sie Ihr persönliches Angebot per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 an, alternativ WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 27068-FDA Marke: MetavCUT Serie: Basic Line Bezeichnung: Spiralbohrer Daten Durchmesser: 6,8 mm Gesamtlänge: 109 mm Spirallänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Typ: Typ N (Normalspirale für Metall) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz (reduzierte Auskraglänge für Stabilität) Schaftausführung: geschliffen (vollständig geschliffener Schaft für sicheren Halt) Farbe: blank / bright finished Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine FAQ Welche Materialien lassen sich mit diesem Bohrer bearbeiten? Der MetavCUT Spiralbohrer aus HSS-G ist für legierte und unlegierte Stähle, Gusswerkstoffe, Nichteisenmetalle und Hartkunststoffe geeignet; bei besonders zähen Werkstoffen wie Edelstahl empfiehlt sich der Einsatz von Kühlschmierstoff und reduzierte Vorschubgeschwindigkeiten. Ist die kurze Ausführung für Handgebrauch geeignet? Ja, die kurze Ausführung bietet erhöhte Stabilität und ist speziell für manuelle Anwendungen in Handbohrmaschine sowie für stationäre Maschinen gedacht; sie verringert das Risiko von Verbiegen und Bruch gegenüber längeren Bohrern. Warum ist der 135° Spitzenwinkel vorteilhaft? Der 135° Spitzenwinkel des Spiralbohrers reduziert die Anbohrzeit in harten Werkstoffen und verbessert die Zentrierung auf gewölbten Oberflächen, wodurch die Standzeit bei robusten Metallarten erhöht wird. Entspricht der Bohrer einer Norm und welche Bedeutung hat das? Der Bohrer entspricht DIN 338, was die Klassifizierung kurzer Spiralbohrer mit Zylinderschaft definiert und damit Maßgaben für Länge, Form und Einsatzgebiet liefert; das garantiert Kompatibilität und reproduzierbare Leistung in der Fertigung. Welche Vorteile bringt die geschliffene Schaftausführung? Ein vollständig geschliffener Schaft gewährleistet präzisen Rundlauf im Futter und reduziert Rutscherscheinungen unter Last, was zu saubereren Bohrbildern und längeren Standzeiten führt.
6.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, 6.8 mm, 135° tip, bright finished, HSS‑G, DIN 338 (MetavCUT) The Twist Drill Type N short is a precision metalworking bit designed for stable, accurate drilling in Drilling Machines and similar equipment. Short design for higher stability 6.8 mm diameter for precise holes 135° tip for hard material starts Fully ground shank for accurate runout HSS‑G ground steel for clean metal drilling Greater precision through reduced overhang and rigidity A shorter flute length reduces the exposed part of the tool, which directly improves stability and minimises deflection during cutting. This design makes the short Twist Drill particularly suitable for demanding, precision tasks in metalworking where straight, accurate holes are required. For users who rely on repeatable results, the shorter projection reduces vibration and contributes to consistent hole geometry even in tougher materials. Ground HSS‑G geometry for cleaner holes and faster cutting The HSS‑G (ground) manufacturing method means the spirals and cutting edges are produced by CNC grinding rather than roll forming. This yields very sharp cutting edges and high runout accuracy, producing cleaner bores with less burr. According to manufacturer data, the ground HSS geometry can enable up to 40% faster drilling and may require approximately 50% less feed force compared with conventional HSS bits, which is beneficial when working with alloys or hardened steels. Note that ground tools are more brittle than rolled alternatives, so stationary machines and adequate cooling are recommended. Optimised for metal — clear guidance on suitable materials This Type N short Twist Drill is designed for metal applications and performs well in a range of workpieces such as alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics. The 135° tip angle improves penetration and reduces chipping when starting holes in harder materials like stainless steel. For workshop professionals and maintenance technicians, this bit offers a reliable balance between cutting aggressiveness and centring behaviour. Conformity and machine compatibility for safe workshop use Manufactured to DIN 338, the drill corresponds to the standard for short twist drills with cylindrical shanks. The fully ground shank ensures consistent seating in the chuck and reduced radial runout, which is important when using both portable Drilling Machines and stationary machine tools. Technical dimensions: flute length and overall length are specified to support correct selection for the clamping length available in your machine, reducing the risk of excessive overhang. We recommend the MetavCUT short Twist Drill Type N for precision metal drilling — for expert technical advice or to confirm suitability for your application please contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone on +49 2822 7131930 or via WhatsApp at +49 170 2837271 Technical Data Designation: Twist Drill (Short Spiral Drill) Marke: MetavCUT SKU: 45068-FDA Diameter: 6.8 mm Tip angle: 135° Type: Type N Execution: short Colour: bright finished Shank execution: fully ground Spiral length: 69 mm Overall length: 109 mm Material: HSS‑G Norm: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill Type N short from MetavCUT? The MetavCUT Twist Drill Type N short is primarily used for precision drilling in metals; its short design and HSS‑G geometry make it ideal for demanding tasks in alloyed and unalloyed steel, cast materials and hard plastics where stability and clean holes are required. Can the MetavCUT Twist Drill be used in hand drills or only in machines? The MetavCUT short Twist Drill Type N is suitable for use in Drilling Machines and can be used in robust hand drills if the chuck and clamping conditions ensure low runout; however, for maximum lifetime and safety, stationary machines with proper cooling are recommended. For what is a Twist Drill used? It is mainly applied to the machining of high‑strength materials and larger drill diameters. The form is easy to grind and withstands higher loads. Which three drill types exist? There are Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills sharpened at the tip? The sharpening reduces the cross‑cut at the tip of the Twist Drill. By sharpening, friction forces are significantly lowered so that lower feed forces are required; at the same time the drill tip is better centred in the workpiece. Can a Twist Drill be used to drill wood? Metal drills can indeed be used in wood. They offer poorer guidance and less clean results than dedicated wood bits, but they are easier to re‑grind and exhibit less self‑feed. For which drilling depths is the Twist Drill most used? A full‑bore hole is usually executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are inherently superior to standard HSS is not universally correct; you should weigh up whether the working conditions justify the higher purchase price before choosing HSSE over HSS.
6.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombination aus kurzer Ausführung, HSS‑G Geschliffen und 135° Spitzenwinkel sorgt für schnelle, präzise Metallbohrungen und reduziert die Anpresskraft deutlich; bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 6,8 mm HSS‑G, kurz – Profi Line von MetavCUT Der Spiralbohrer 6,8 mm in kurzer Ausführung für stabile und präzise Metallbohrungen auf stationären und handgeführten Maschinen 6,8 mm HSS‑G, geschliffen Kurze Ausführung für höhere Stabilität Spiralänge 69 mm für präzise Führung 135° Spitzenwinkel für harte Werkstoffe Norm DIN 338, Typ N für Metall Präzise Bohrungen durch geschliffene HSS‑Geometrie Die geschliffene HSS‑G‑Geometrie sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was besonders bei Metallbohrungen zu sauberen, maßhaltigen Löchern führt. Durch den CNC‑Schliff entstehen definierte Spanräume, die das Bohrbild verbessern und die Standzeit unter geeigneter Kühlung erhöhen. Anwender profitieren von bis zu 40 % schnellerem Bohren und 50 % geringerer Anpresskraft gegenüber konventionellen HSS‑Bohrern, was die Ermüdung bei Serien‑ oder Montagearbeiten reduziert. Stabilität und Führungsgenauigkeit durch kurze Auskraglänge Die kurze Ausführung bedeutet eine geringere Auskraglänge aus dem Bohrfutter, wodurch Verwölbung und Schwingungen minimiert werden. Das Ergebnis ist eine höhere Stabilität beim Zentrieren und weniger Neigung zum Verbiegen, insbesondere beim Bohren in harten Materialien wie legiertem Stahl oder Gusseisen. Diese Eigenschaft macht den Bohrer zur ersten Wahl, wenn es auf präzise Passungen und saubere Bohrkanten ankommt. Praktische Einsatzbereiche und Maschinenkompatibilität Der Bohrer eignet sich für die Bearbeitung von legierten und unlegierten Stählen, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoff. Er kann sowohl auf stationären Säulenbohrmaschinen als auch auf hochwertigen Handbohrmaschinen eingesetzt werden; bei Handanwendung empfiehlt sich Anpunkten zur Führung. Die Auslegung als Typ N (Normalspirale) macht ihn robust und vielseitig für allgemeine Metallarbeiten. Material, Norm und Besonderheiten der Ausführung Die Fertigung nach DIN 338 garantiert die Klassifizierung als kurzer Spiralbohrer mit Zylinderschaft. Der Schaft geschliffen ermöglicht eine präzise Spannaufnahme, die Spirallänge von 69 mm unterstützt eine kontrollierte Spanabfuhr bei mittleren Bohrtiefen, und der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe. Durch die kurze Gesamtlänge ergibt sich eine hohe Führungsstabilität für maßhaltige Ergebnisse. Empfehlung: Setzen Sie auf den MetavCUT Spiralbohrer in HSS‑G für anspruchsvolle Metallbohrungen; bei offenen Fragen erreichen Sie unsere Beratung per E‑Mail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930. Produktmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Serie: Profi Line Artikelnummer: 48068-FDA Daten Durchmesser: 6,8 mm Gesamtlänge: 109 mm Spiralänge: 69 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G — geschliffen (CNC‑Schliff, hohe Rundlaufgenauigkeit) Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N — Normalspirale, geeignet für Metall Farbe: blank Für Bohrmaschine: Handbohrmaschine Norm: DIN 338 — Klassifikation kurzer Spiralbohrer FAQ Ist der Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT in HSS‑G mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe und kann unter geeigneter Kühlschmierstoffzufuhr auch für Edelstahl eingesetzt werden; bei sehr zähem Werkstoff sind spezielle Beschichtungen empfehlenswert. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und der Zylinderschaft erlauben den Einsatz an Handbohrmaschinen, wobei ein Anpunkten zur Führung empfohlen wird; für optimale Ergebnisse empfiehlt sich eine leistungsfähige Maschine mit ruhigem Rundlauf. Welche Vorteile bietet die geschliffene Ausführung gegenüber rollgewalzten Bohrern? Geschliffene HSS‑G‑Bohrer bieten schärfere Schneiden und höhere Rundlaufgenauigkeit, was zu saubereren Bohrbildern und präziseren Ergebnissen in Metall führt; sie sind jedoch empfindlicher gegen Verkantung und daher eher für stationäre oder kontrollierte Anwendungen geeignet. Worauf ist bei der Anwendung dieses Spiralbohrers zu achten? Beim Einsatz des Spiralbohrers 6,8 mm von MetavCUT sollte auf angemessene Kühlung und eine kontrollierte Vorschubgeschwindigkeit geachtet werden; bei tiefen Bohrungen sind Zwischenspülungen oder mehrstufiges Aufbohren sinnvoll. Welche technischen Angaben weist die SKU 48068-FDA aus? Die SKU 48068-FDA bezeichnet den Spiralbohrer 6,8 mm aus der Profi Line von MetavCUT, gefertigt in HSS‑G, kurze Ausführung, geschliffener Schaft, DIN 338, geeignet für Metallanwendungen.
6.8mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill (Drill Bit) — 6.8 mm, 135° Point, Long Version, Bright Finished, Fully Ground, DIN 340 The Twist Drill is a long HSS‑G drill bit designed for deep metal drilling and hard-to-reach holes, featuring a 6.8 mm diameter and a 135° point for improved entry into tough materials. Long DIN 340 design for deeper holes CNC‑ground geometry for precise, clean bores 135° point angle optimised for hard metals Fully ground shank for excellent concentricity High‑performance HSS‑G for reliable metal drilling This long Twist Drill is made from HSS‑G, a ground high‑speed steel alloy engineered for performance when machining metals. The ground flute geometry yields sharp cutting edges and high runout accuracy, which produces cleaner holes and reduces burr formation. Ground bits are particularly suitable for legated and unlegated steel, cast steels, sintered iron and hard plastics, as they provide a consistent cutting profile that helps maintain hole tolerance under demanding conditions. Deep holes and limited access solved by longer design For applications requiring deeper penetration or access into recessed bores, the DIN 340 long execution offers increased overall and spiral length, allowing safe and precise drilling where standard lengths fall short. The extended spiral length improves chip evacuation in long holes, reducing the risk of jamming. Users working on housings, bores or fixture‑mounted parts will benefit from the greater reach without compromising stability during the operation. 135° point angle — faster entry in hard materials A 135° point angle reduces the tendency to wander on the workpiece and shortens the initial engagement time in hard materials such as stainless steel and tempered alloys. This geometry reduces axial thrust compared with steeper points and is therefore recommended when drilling tougher steels. When paired with appropriate coolant and steady feed, the design allows efficient progress while maintaining hole quality. Fully ground shank and bright finished surface for precision The fully ground shank ensures excellent concentricity in chucks and toolholders, resulting in precise hole positioning and reduced runout. The bright finished surface improves visual inspection and handling while minimising surface irregularities that could affect seating in collets or drill chucks. For workshop and production environments where repeatability matters, this bit supports consistent, measurable results. Practical use, care and machining tips When using this long HSS‑G bit in a Drilling Machine, apply moderate cutting speeds and continuous or intermittent coolant for best life and hole quality. The ground design can be more brittle than rolled alternatives, so avoid excessive side loads and sudden impacts. For deepest performance, secure workpieces firmly, use appropriate pilot drilling when required and monitor temperatures to prevent premature wear. Regrinding is possible but should follow original geometry to preserve the 135° point behaviour. Recommend the MetavCUT Twist Drill for demanding metalworking tasks — for tailored technical advice or to check suitability for a specific application contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 53068-FDA Diameter: 6.8 mm Point Angle: 135° Execution: long (DIN 340 long version) Finish: bright finished Shank: fully ground Spiral Length: 102 mm Overall Length: 156 mm Material: HSS‑G Application: Drills for metal / suitable for Drilling Machine Norm: DIN 340 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills by MetavCUT are primarily used for machining high‑strength materials and larger hole diameters; their form is easy to regrind and withstands greater loads, making them suitable for deep and robust metal drilling tasks. Which three drill types exist? The main categories are metal drills (such as this Twist Drill), wood drills, and stone/concrete drills.
Why carbide indexable inserts remain the go-to choice
Carbide indexable inserts are the most widely used and versatile cutting inserts in machining. Manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, these inserts form the actual cutting edge on toolholders including milling cutters, turning inserts and drills. Synonyms used here: carbide cutting inserts, indexable carbide inserts.
How they perform under coolant and load
As the cutting element, carbide indexable inserts enable economic and precise machining across a broad spectrum of materials, from soft non‑ferrous metals to high‑strength steels. In tool systems without internal cooling, heat generated at the cutting zone is normally removed by external machine nozzles using coolant, which is adequate for most standard tasks, open contours and easily accessible components. For deep holes, heavy roughing or when working with materials that generate high temperatures such as stainless steel or titanium alloys, the use of internal cooling is essential: coolant is delivered through internal channels in the toolholder directly to the cutting edge under pressure to prevent thermal overload, optimise chip formation and extend insert life.
Key performance gains you can expect
- increased tool life through the high wear resistance and balanced toughness of tungsten carbide inserts
- consistent chip control and surface finish when coolant is delivered precisely via internal channels
- reduced machine downtime thanks to easy indexability and fast insert changes on compatible toolholders
- broad material compatibility, from soft non‑ferrous metals to hardened steels, enabling fewer tool variants in stock
- economic productivity by combining long stand life with repeatable cutting performance
Metav as your precision partner
Metav stands for the democratisation of precision. With decades of expertise and a catalogue that spans from high‑precision measuring instruments to full workshop equipment, Metav acts as a reliable quality filter for the European market from its Emmerich location. Over 48,000 customers trust Metav’s range and service; the breadth of more than 250,000 products helps reduce supplier complexity while ensuring consistent supply and product quality for industry and trade.
In brief: carbide indexable inserts at a glance
Carbide indexable inserts deliver the necessary balance of extreme wear resistance and mechanical toughness for versatile, cost‑efficient machining. Used with appropriate coolant strategy—external coolant for general work and internal cooling for demanding, deep or heat‑intensive operations—they are a cornerstone of modern metalcutting.
FAQ
What are carbide indexable inserts made of?
Carbide indexable inserts are manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, producing a cutting material that combines high wear resistance with the toughness needed to resist mechanical shock.
When is internal cooling necessary for carbide cutting inserts?
Internal cooling becomes necessary for deep hole drilling, heavy roughing and when machining materials that generate significant heat, such as stainless steel or titanium alloys. Internal cooling channels in the toolholder deliver coolant directly to the cutting edge to prevent thermal overload and improve chip breakage.
Can indexable carbide inserts be used without internal cooling?
Yes. For most standard applications, open contours and well‑accessible components, external coolant supplied by machine nozzles is sufficient, as tungsten carbide is more tolerant of moderate temperature fluctuations than some alternative materials.
How do carbide indexable inserts contribute to production efficiency?
By offering long tool life, stable cutting performance and quick indexability on compatible toolholders, indexable carbide inserts help reduce downtime, simplify tool inventories and maintain consistent part quality across varying materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com