Carbide indexable inserts for high‑performance metalworking
Carbide indexable inserts are wear‑resistant cutting elements designed to deliver economical, precise material removal across a wide range of workpieces, offering excellent balance between extreme wear resistance and the toughness required to withstand mechanical shocks. Used on toolholders such as cutters, turning tools and twist drills, they enable efficient machining of materials from soft non‑ferrous alloys to high‑strength steels by optimising cutting forces and thermal stability. For standard accessible contours external coolant is often sufficient, while deep holes, heavy cutting or machining of stainless steel and titanium alloys benefit from internal coolant channels to protect the cutting edge, improve chip control and extend insert life. Key advantages include high durability, consistent surface finish and reduced tool changeover times through the use of replaceable indexable inserts, carbide grades and toolholder systems.
8.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill short HSS-G Type N — Ø 8.8 mm, 135° tip, Bright Finished, DIN 338 The Twist Drill short HSS-G Type N is a precision metal‑drilling tool designed for use in Drilling Machines, offering high stability and fast cutting performance for hard materials. Short design for improved stability Ø 8.8 mm for precise metal holes 135° tip for hard materials like stainless steel HSS‑G fully ground for sharp cutting edges Conforms to DIN 338 for consistent accuracy Faster, cleaner metal drilling with measurable efficiency The short Twist Drill from MetavCUT combines a compact geometry with a HSS‑G ground flute to deliver up to 40% faster drilling and 50% less feed force compared with conventional HSS variants. This efficiency reduces operator effort and machine load, making the tool particularly advantageous for repetitive metalworking tasks. The reduced overhang lowers vibration and increases Precision, resulting in cleaner hole walls and less burr formation. Reliable performance in hard and alloyed metals Designed as a Type N normal‑spiral drill, this short twist drill is optimised for a wide range of metallic materials: legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle and hard plastics. The 135° tip angle shortens entry time and improves centring in tougher workpieces, so fewer dwell corrections are needed. For users with limited experience, this means more consistent results when working with challenging materials. Precision geometry and fabrication for professional results The tool is manufactured according to DIN 338 as a short twist drill with a cylindrical shank. The fully ground flute geometry (HSS‑G) ensures razor‑sharp cutting edges and excellent runout accuracy, which benefits machining centres and manual setups alike. Ground drills deliver very clean holes and high repeatability; however, they require appropriate coolant and controlled feed to avoid chipping under heavy intermittent loads. Compact design that expands machine compatibility With a spiral length of 75 mm and overall length of 117 mm, the short execution reduces cantilever and enhances stability in the chuck. This compactness makes the drill well suited for use in Drilling Machines where rigidity and minimal deflection are critical. The bright finished surface aids chip evacuation and inspection, while the cylindrical shank fits standard chucks reliably. Practical guidance for safe and effective use When working with harder alloys, prefer moderate speeds and steady feed to leverage the 135° geometry. Use cutting fluid for prolonged tool life and improved surface finish. The short design is ideal for setups where overhang must be minimised; for very deep holes beyond the spiral length, choose an appropriately longer tool. For specific machining parameters or support with selection, METAV Werkzeuge offers comprehensive advice and technical consultation. Strong recommendation: For precise metalworking choose the MetavCUT short HSS‑G Twist Drill Type N for its superior stability and cutting efficiency — for technical questions or personalised advice contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48088-FDA Type: Type N Diameter: 8.8 mm Tip angle: 135° Material: HSS-G Norm: DIN 338 Execution: short Spiral length: 75 mm Overall length: 117 mm Shank finish: fully ground Colour/Finish: bright finished Application: Drills for metal Model series: Profi Line For Drilling Machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which tasks suit the MetavCUT Twist Drill short HSS‑G Type N best? The MetavCUT Twist Drill short HSS‑G Type N is mainly applied to the machining of high‑strength materials and larger drill diameters; its short form is easy to regrind and withstands higher loads, making it especially suitable for precise metalworking and demanding industrial applications. Which three drill types are commonly available? The three principal drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling in a variety of metals.
8.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS Ø 8.9 mm, 118° tip, black, DIN 338, short design The Twist Drill Type N short HSS is a metalworking bit designed for precise drilling in metals with hand drills and drilling machines, offering a stable short shank and a 118° tip for efficient penetration. Short design for increased stability HSS construction for reliable metal drilling 118° tip for easier penetration in softer metals DIN 338 standard for short twist drills Compatible with hand drills and drilling machines Precision and stability for demanding metalwork The short Type N geometry delivers high stability and reduced run-out during operation, which directly benefits hole accuracy. With a Ø 8.9 mm cutting diameter and a total length of 125 mm, this short twist drill minimises bending and chatter when used in both portable and benchtop drilling equipment. The compact spiral length of 81 mm concentrates rigidity where it matters, enabling consistent hole diameter and a cleaner finish even under higher cutting loads. Durable HSS material for extended tool life Made from HSS (High Speed Steel), the bit combines hardness and toughness for prolonged service life in a wide range of metals. The material choice supports drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, while still allowing straightforward resharpening when required. For users this means fewer tool changes, predictable wear behaviour and reliable performance in routine workshop and maintenance tasks. Practical use cases and who benefits most Designed for professional workshops, maintenance teams and skilled hobbyists, the MetavCUT short twist drill is ideal where precision and repeatability are required. The Type N spiral is optimised for metallic materials, and the black finish improves visibility during setup. If you are unsure whether the bit suits a specific machine or material, METAV Werkzeuge offers detailed advice and technical support — contact via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271. Standards, tip geometry and application guidance Conforming to DIN 338 as a short twist drill ensures consistent dimensions and manufacturing quality across batches. The 118° tip angle favours entry and centring in softer metals and related tasks, while the classic Type N flute geometry balances chip evacuation and cutting action. For harder stainless steels or very abrasive materials, consider a flatter tip angle or a coated variant; for standard steel work, this short HSS bit provides an effective combination of penetration and rigidity. Strong recommendation: Opt for the MetavCUT Twist Drill Type N short HSS for precise metal drilling — expert consultation and ordering support are available from METAV Werkzeuge at info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40089-FDA Diameter: 8.9 mm Tip angle: 118° Spiral length: 81 mm Total length: 125 mm Type: Type N Material: HSS Execution: short Colour: black Suitable for: Drilling Machine / Hand drills Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill are primarily used for machining high-strength materials and larger drill diameters; their form is easy to resharpen and they withstand considerable loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills group and is designed accordingly. Why are twist drills tipped? The tip sharpening reduces the cross-cut at the drill point, which lowers friction and therefore reduces the required feed force; this also improves centring of the MetavCUT Twist Drill during the initial entry into the workpiece. Can a Twist Drill be used to drill wood? A metal drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are usually inferior compared with a dedicated wood bit; metal drills are easier to resharpen and show less self-feed, which can be an advantage in some manual operations.
8.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 8.9 mm, 135° point, short HSS‑E, 5% cobalt‑alloyed, fully ground shank, DIN 338, MetavCUT The Twist Drill is a short Type N drill designed for precision metalworking, offering high stability and improved penetration for harder materials thanks to its 135° point angle. Short design for improved stability 8.9 mm Diameter for common metal holes 135° Point Angle for harder materials HSS‑E with 5% cobalt for heat resistance Fully ground shank for high runout accuracy Precision and stability for metalworking that matters This short, purpose‑built cutter delivers stability where long overhangs would cause deflection. The reduced overall length and shorter projection reduce bending and vibration during drilling, which directly improves hole accuracy and prolongs tool life. For workshop operations and portable drilling machines, this geometry supports fast, straight entries into Steel and other metals, translating to fewer rejected parts and less rework. Durable material for demanding conditions Manufactured from HSS‑E with 5% cobalt, the tool resists heat and wear significantly better than standard HSS. That makes it suitable for sustained drilling in alloyed and unalloyed Steel, Cast Iron and Non‑Ferrous Metals. The cobalt content increases red hardness, so the cutter maintains cutting edges at higher temperatures; the direct user benefit is longer service life and fewer tool changes when machining tougher materials. Geometry optimised for harder workpieces The 135° point angle is chosen to ease engagement with harder materials and to reduce chatter on difficult surfaces. A wider point angle shortens the initial entry time and decreases the tendency of the tip to wander, which is particularly helpful on stainless Steel and high‑strength alloys. The "Type N" normal helix fluting provides a balance between chip evacuation and cutting stability for metalworking tasks. Ground flute finish and norm conformity for precise holes Being fully ground (HSS‑G style) yields sharp cutting lips and very good concentricity, resulting in clean, burr‑reduced holes with excellent surface finish. Conformance to DIN 338 ensures consistent dimensions and interchangeability, which benefits production runs and tool inventories. For users who value repeatable quality, this specification simplifies planning and tool management in professional shops. Intended use and target users Designed for machinists, maintenance teams and metalworking professionals, this short twist drill excels where precision counts and materials are tough. It suits both stationary machines and hand‑held drilling machines where a compact, stiff tool is needed. The result is reliable performance in fabrication, repair, and assembly environments where reproducible hole quality reduces secondary operations. We recommend MetavCUT’s precision HSS‑E short twist drill for demanding metal applications; for personalised technical advice or if you are unsure this tool meets your requirements, contact METAV Werkzeuge for competent consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 47089-FDA Diameter: 8.9 mm Total length: 125 mm Spiral length: 81 mm Point angle: 135° Type: Type N Execution: Short Colour: 5% cobalt‑alloyed Shank execution: Fully ground Material: HSS‑E Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters; its short form and robust design make it particularly suitable for precise drilling in Steel and other metals. This form is easy to re‑grind and withstands higher loads, which supports longer life under demanding conditions. Which 3 drill types exist? When considering the MetavCUT Twist Drill (Type N), the three main drill categories to know are Metal drills, Wood drills, and Stone/Concrete drills. Each category is optimised for different materials and geometry, so selecting the correct drill type ensures better results and tool life.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Short Type N 8.9 mm | 135° | HSS-G | Bright Finished | DIN 338 The Twist Drill Short Type N is a precision metalworking drill for Drilling Machines, designed for stable and accurate machining of hard materials. Short design for higher stability 135° point angle for hard materials HSS‑G fully ground for precise holes Complies with DIN 338 for short drills Suitable for use in Drilling Machine applications Durable HSS‑G construction for reliable machining Equipped with HSS‑G material, this Twist Drill delivers consistent cutting performance when working with alloyed and unalloyed steels. The fully ground geometry produces sharp cutting edges and high concentricity, which results in clean, burr‑reduced holes and extended tool life under correct cooling. Because the flute geometry is produced by CNC grinding rather than rolling, users benefit from superior roundness and repeatable accuracy that is particularly useful in demanding metalworking environments. Short overall length for enhanced stability and accuracy Thanks to its Short Design, the drill offers reduced overhang from the chuck, lowering the tendency to deflect and improving concentricity when drilling in tougher materials. This results in higher feed control and better hole quality, especially on bench and floor Drilling Machines. When precision counts, the shorter projection enables operators to apply lower lateral forces and maintain tighter tolerances, making the tool ideal for repetitive, high‑precision metalworking tasks. Optimised geometry for hard materials and faster drilling With a 135° Point Angle, the Twist Drill penetrates harder workpieces such as stainless steel more efficiently than standard angles, reducing the initial skidding and improving centring. The ground cutting lips and polished flutes support faster chip evacuation and allow up to 40% quicker drilling rates under suitable conditions, while requiring significantly lower feed force compared with conventional HSS drills. This geometry is particularly effective for applications where reduced entry burr and consistent hole form are priorities. Conformance, application and user guidance Manufactured to DIN 338, this Short Twist Drill Type N is specified for metalworking tasks on rotating stationary or portable machines. It is intended primarily for drilling metallic materials including cast iron, sintered iron, non‑ferrous metals and hard plastics, and is not optimised for very soft timbers. For best results, use appropriate cutting speed, steady coolant supply and a stable clamping setup to exploit the drill’s high concentricity and edge sharpness. Strong recommendation: Choose MetavCUT Twist Drill for demanding metal drilling tasks and contact METAV Werkzeuge for expert technical support and ordering assistance — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Marke: MetavCUT SKU: 45089-FDA Diameter: 8.9 mm Overall Length: 125 mm Spiral Length: 81 mm Point Angle: 135° Type: Type N Execution: short Shank Execution: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Packaging Unit: 5 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Short Type N best used for? The MetavCUT Twist Drill Short Type N is primarily used for machining metal; it excels in drilling alloyed and unalloyed steel, cast materials and harder plastics thanks to its robust HSS‑G construction and shortened geometry that improves stability. Can the MetavCUT Twist Drill be used in a hand drill or only in a Drilling Machine? The Twist Drill is designed for Drilling Machine applications to achieve optimal stability and concentricity, though it may be used in heavy‑duty hand drills with appropriate clamping and reduced projection; for precise industrial tasks a stationary Drilling Machine is recommended. What are Twist Drills used for? Twist Drills are mainly applied in the machining of high‑strength materials and large drill diameters; their grindable form allows straightforward re‑sharpening and they withstand greater loads, making them suitable for demanding metalwork. Which three drill types exist? The common drill types are Metal Drill, Wood Drill and Stone/Concrete Drill. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip, significantly lowering friction; by re‑pointing the tip the required feed force decreases and the drill centres better in the workpiece. Can you drill wood with this Twist Drill? A Metal Drill like the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, metal drills are easier to re‑sharpen and show less self‑pulling action. For which depths is the Twist Drill most used? Twist Drills are the standard tool for through drilling; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm. Is HSS or HSSE better? The assumption that HSSE is always superior to HSS is incorrect; selection should depend on working conditions and whether the higher cost of HSSE is justified by specific application demands.
8.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (Type N) — Short HSS‑G, Ø 8.9 mm, 135° Tip, Bright Finished, DIN 338 A MetavCUT Twist Drill (Type N) for precise metalworking, optimised for use with a Drilling Machine and handheld drills where stability and clean holes are essential. Short design for increased stability and precision Fully ground shank for high runout accuracy 135° tip angle for hard materials HSS‑G material for fast, precise metal drilling Conforms to DIN 338 for standardised performance Short length for greater accuracy and less deflection A shorter overall length reduces the exposed Cantilever and therefore the tendency to bend during drilling. The MetavCUT short Twist Drill combines a reduced Spiral Length with a robust geometry to deliver higher stability and repeatable hole accuracy. For workshop applications this means fewer reworks and tighter tolerances, especially when working with hard materials where tool chatter normally degrades the hole quality. Sharper geometry lowers feed forces and boosts speed The HSS‑G (ground high speed steel) geometry and a 135° tip are tailored to penetrate tougher metals with less effort. The grinded flute profile produces very sharp cutting edges and better centring, so drilling can be up to 40% faster and requires significantly lower Feed Force compared with conventional HSS bits. Type N normal spiral makes this bit especially suitable for steels, cast materials and non‑ferrous metals while maintaining clean, burr‑reduced holes. Engineered for metalworking and standardised reliability Manufactured to DIN 338 the short Twist Drill is specified for metal applications on stationary and portable drilling equipment. It excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics. Conformance to the norm ensures consistent dimensions, shank fit and performance across batches, simplifying tool selection and inventory for professional workshops. Practical handling and care for longer tool life Fully ground flutes and a bright finished surface aid chip evacuation and improve runout precision, but ground HSS can be more brittle than rolled variants. Use coolant for extended life when drilling deep or hard materials and avoid excessive lateral forces; stationary drilling with appropriate clamping yields the best results. For handheld operations the short design reduces vibration and improves control, while occasional resharpening restores edge quality if needed. We recommend the MetavCUT Profi Line short HSS‑G Twist Drill as the professional choice for precision metal drilling — for expert advice and technical support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48089-FDA Diameter: 8.9 mm Overall Length: 117 mm Spiral Length: 75 mm Tip Angle: 135° Type: Type N Execution: short Shaft Finish: fully ground Surface Colour: bright finished Material: HSS‑G Standard: DIN 338 For Use With: Drilling Machine (Handbohrmaschine) Model Series: Profi Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ How well does the MetavCUT Twist Drill Type N perform in stainless and hard steels? The MetavCUT Twist Drill Type N with a 135° tip and HSS‑G ground geometry is designed to reduce Anbohrzeit and improve centring in harder materials; it provides faster penetration and cleaner holes in stainless and alloyed steels when used with appropriate coolant. Can the MetavCUT Twist Drill Type N be used in a handheld drill? Yes, the short design of the MetavCUT Twist Drill Type N improves stability and control in a Hand Drill, making it suitable for many on‑site and workshop tasks; however, for maximum tool life and precision, stationary drilling and cooling are recommended. What are Twist Drills used for? Twist Drills are used primarily for machining high‑strength materials and larger diameters; they are relatively easy to resharpen and withstand higher loads. The short version is particularly suited to precision work in steels and other hard materials. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills.
8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der Spiralbohrer in HSS überzeugt durch die Kombination aus hoher Stabilität durch die kurze Ausführung und der Normkonformität nach DIN 338, was präzise Metallbohrungen erlaubt. Nutzen Sie die robuste Geometrie mit einem Spitzenwinkel von 118° und der für Handbohrmaschine geeigneten Zylinderschaft. Bestellungen und fachliche Beratung erhalten Sie direkt über Metav Werkzeuge oder per Technische Beratung anfordern. Spiralbohrer 8 mm (HSS, kurz) von MetavCUT Der Spiralbohrer 8 mm ist ein kurzer HSS-Bohrer nach DIN 338 für präzises Bohren in Metall an Handbohrmaschine und stationären Maschinen. HSS-Schnellarbeitsstahl für Stahl und Metall Normgerechte Ausführung nach DIN 338 Kurze Bauform für hohe Stabilität Spitzenwinkel 118° für universelle Anwendung Zylinderschaft für Handbohrmaschine Hohe Stabilität für präzise Metallbearbeitung Die kurze Ausführung des Bohrers reduziert die Auskraglänge und sorgt so für erhöhte Stabilität bei Kraftübertragung und Führung. Durch die Verwendung von HSS bleibt die Schneide zäh und widerstandsfähig gegen thermische Belastung, was besonders bei Serien von mittelgroßen Bohrungen im Werkstattalltag von Vorteil ist. Diese Konstruktion vermindert Schwingungen und reduziert damit das Risiko von Werkzeugbruch sowie das Entstehen von Unrundheiten. Passende Anwendungen und Maschinenkompatibilität Der Durchmesser von 8 mm fällt in den Bereich für allgemeine Werkstatt- und Montagearbeiten und eignet sich deshalb besonders für dünne bis mittlere Bleche, Profile sowie Baustahl, Aluminium und Kunststoffe. Einsatz an Handbohrmaschine und stationären Säulenbohrmaschinen ist möglich, wobei bei hochpräzisen Passungen ein Anpunkten mit Zentrierbohrer empfohlen wird. Der Typ N Normalspirale ist speziell auf Metall zugeschnitten und bietet zuverlässige Spanabfuhr bei üblichen Vorschubwerten. Bohrgeometrie, Spitzenwinkel und Bedienhinweise Der Spitzenwinkel 118° ermöglicht ein ausgewogenes Eindringverhalten und gute Zentrierfähigkeit auf flachen und leicht gewölbten Oberflächen; für sehr harte Werkstoffe wäre ein größerer Winkel vorteilhaft. Die Spirallänge 75 mm und die Gesamtlänge 117 mm bieten ausreichend Spanraum für saubere Spanabfuhr. Zur Verlängerung der Standzeit empfiehlt sich passende Kühlschmierstoffzufuhr und abgestimmte Schnittdaten sowie bei Bedarf das Vorbohren zur Entlastung der Querschneide. Qualität, Norm und Eignung für den Werkstattalltag Die Fertigung nach DIN 338 garantiert die standardisierte Abmessung und Ausführung kurzer Spiralbohrer mit Zylinderschaft, was die Austauschbarkeit und Lagerhaltung erleichtert. Die Ausführung in HSS und die Typisierung als Typ N sichern die Vielseitigkeit im Einsatzfeld Metall. MetavCUT steht für zuverlässige Werkzeuge, und Metav Werkzeuge bietet transparente Versorgung sowie technische Beratung aus Emmerich für Anwender in Industrie und Handwerk. Empfehlung: Für belastbare und präzise Metallbohrungen das MetavCUT HSS-Kurzspiralbohrer-Programm wählen; Bestellungen und technische Rückfragen gern über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 40080-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Fakten Durchmesser: 8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 118° Verpackungseinheit: 5 Besonderheiten Material: HSS Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: kurz Typ: Typ N Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer (Spiralbohrer, Typ N, SKU 40080-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und ist damit eine vielseitige Wahl für Werkstatt und Montage. Ist der Bohrer für den Einsatz in einer Handbohrmaschine geeignet? Ja, der Spiralbohrer von MetavCUT ist wegen der kurzen Ausführung und dem Zylinderschaft für die Nutzung an Handbohrmaschine freigegeben und bietet dort gute Stabilität. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das für die Anwendung? Der Spitzenwinkel beträgt 118°, was universelle Einsatzmöglichkeiten fördert und besonders bei Aluminium und allgemeinen Metallarbeiten für gutes Eindringverhalten sorgt. Wie lang sind Spirale und Bohrer insgesamt? Die Spirallänge beträgt 75 mm, die Gesamtlänge 117 mm; diese Dimensionen gewährleisten ausreichende Spanabfuhr bei mitteltiefen Bohrungen. Wie viele Bohrer sind in einer Verpackungseinheit enthalten? Die Verpackungseinheit umfasst 5 Stück des MetavCUT Spiralbohrers mit der SKU 40080-FDA.
8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Type N short · 8 mm · 135° · HSS‑E · DIN 338 · 5% cobalt‑alloyed · Fully Ground — MetavCUT The Twist Drill Type N short 8 mm is a precision metal‑drilling bit for use in a Drilling Machine, designed for stable, accurate holes in hard materials. Short design for improved stability and precision 8 mm HSS‑E geometry for hard and alloyed steels 135° point angle for reduced walking in stainless steel Fully ground shaft for high concentricity and clean holes Manufactured to DIN 338 for metal machining reliability Precise material and cutting performance for demanding metalwork This short Twist Drill is made from HSS‑E (High Speed Steel with cobalt) and features a 5% cobalt‑alloyed composition that increases hot hardness and wear resistance. The shorter overall length reduces cantilever action, which directly improves stability and reduces the risk of deflection during machining. For operators who require consistent hole quality in tough materials, the cobalt‑enriched steel provides longer tool life under elevated temperatures compared with standard HSS. Designed for stable, accurate drilling in hard materials The Type N geometry with a 135° point angle is optimised for harder substrates such as stainless steel and alloyed steels; the flatter point decreases the tendency to dig in and shortens the initial plunge time. Because the bit is fully ground, it delivers excellent runout accuracy and very sharp cutting edges, resulting in cleaner holes with minimal burr formation. These characteristics are particularly valuable for precision work on components where hole accuracy matters. Practical advantages and typical uses in workshops Short twist drills to DIN 338 are especially suited to bench and machine drilling operations where rigidity is available—examples include drilling in alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The reduced overhang makes setup easier and safer on both stationary and portable drilling equipment. Users benefit from fewer broken tools when observing recommended feeds, speeds and adequate cooling, particularly for diameters below 6 mm; for the 8 mm size here, appropriate cooling extends life and improves surface finish. Recommendations for machining and tool handling When using this short, fully ground twist drill, clamp the workpiece securely and use a Drilling Machine with proper alignment. Start with a centre or pilot mark when high positional accuracy is required and apply cutting fluid for prolonged tool life when machining stainless or high‑strength alloys. The rolling or grinding manufacturing method affects regrindability: fully ground bits offer superb initial sharpness and repeatable geometry, but they can be more brittle—regrind carefully and avoid excessive heat build‑up during sharpening. MetavCUT recommends this short HSS‑E Twist Drill for precision metal applications; for personalised advice or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 — expert consultation is available. Designation: Twist Drill Brand: MetavCUT SKU: 47080-FDA Diameter: 8 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Type: Type N Material: HSS‑E (High Speed Steel with cobalt) Finish / Version: short Shaft Finish: fully ground Colour / Alloy: 5% cobalt‑alloyed For Use In: Drilling Machine Norm: DIN 338 Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking: alloyed and unalloyed steels, cast iron, non‑ferrous metals and certain plastics; the HSS‑E composition and 135° point angle improve performance when machining harder materials. How should I use the MetavCUT Twist Drill Type N to maximise tool life? For best results with the MetavCUT Twist Drill Type N, secure the workpiece, use correct spindle speed and feed for 8 mm HSS‑E, and apply cutting fluid when machining stainless or high‑temperature alloys to reduce wear and avoid overheating. What is a Twist Drill used for? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters; this form is easy to regrind and withstands higher loads. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are twist drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, significantly lowering friction so that reduced feed forces are sufficient; it also improves initial centring of the tip in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance is poorer and the hole finish is less clean; however, metal drills are easier to resharpen and show less self‑feeding. At which drilling depths is the twist drill most commonly used? Solid drilling with a twist drill is standard for hole diameters up to about 20 mm and drilling depths up to roughly 100 mm; it is the most frequently used tool for these ranges. Is HSS or HSSE better? The common belief that HSSE is always superior to HSS is incorrect; you should assess whether working conditions justify the higher cost of HSSE for your specific application.
8mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Twist Drill) by MetavCUT — HSS‑G double sided, Ø 8 mm, 135°, black finished without margin, fully ground shank, total length 79 mm, spiral length 20 mm The Body Drill (Twist Drill) is a double‑ended HSS‑G metalworking drill designed for precision holes in alloyed and unalloyed steels using a Drilling Machine. Double‑ended design for two usable tips CNC‑ground geometry for precise, clean holes 135° tip angle for hard metals like stainless steel Fully ground shank for high runout accuracy High performance drilling for demanding metalwork Designed for professionals, this HSS‑G Twist Drill delivers reliable performance when accuracy counts. The CNC‑ground flute geometry produces sharp cutting edges and reduces required feed force by up to 50% compared with conventional HSS types, which allows faster penetration and less operator fatigue. The 135° tip angle shortens start time on hard materials and improves centring on tough surfaces, making it particularly suitable for alloyed steel and cast materials. Durable design that keeps downtime low A short, double‑ended configuration provides practical resilience: if one end dulls, the bit can be reversed and reused, effectively offering two cutting tips in one tool. The fully ground shank enhances concentricity and reduces runout, resulting in cleaner holes and less rework. For stationary machining or cooled drilling cycles the construction offers consistent edge life, while the black finished surface improves corrosion resistance during storage. Practical guidance for application and tool choice This Twist Drill is optimised for metal applications such as thin sheet, rivet holes and small component bores, and it pairs best with a stable Drilling Machine at appropriate speeds and coolant. For hand‑held drills, ensure a secure chuck and controlled feed as the ground geometry is sharper and can be more brittle than rolled types. Use cutting fluid for prolonged tool life when working with stainless or tempered steels to avoid premature wear. Who benefits from this tool and how to use it safely Machinists, bodywork specialists and metal fabricators benefit most from this bit’s combination of precision and serviceability. The double‑ended design suits repetitive shop tasks where quick tip rotation reduces tool change time. When drilling, start with a light pilot feed to improve centring; the larger point angle reduces walking on hard surfaces. Follow standard safety and cooling practices to mitigate brittleness risk and extend cutting life. Strong recommendation: choose the MetavCUT Body Drill (Twist Drill) when you need precision, durability and the convenience of a double‑ended HSS‑G solution — for expert product advice and application support contact METAV Werkzeuge. Are you unsure if this tool fits your task or need further technical data? METAV Werkzeuge offers comprehensive advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Body Drill (Twist Drill) Brand: MetavCUT SKU: 59080-FDA Diameter: 8 mm Point angle: 135° Type: double sided (double‑ended) Colour/Finish: black finished without margin Application: Drills for metal / Drill for Metal Spiral length: 20 mm Total length: 79 mm Shank execution: fully ground Material: HSS‑G For drilling machine: Drilling Machine Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Body Drill (Twist Drill) is primarily applied to the machining of high‑strength materials and larger hole diameters; its shape allows easy resharpening and it withstands greater loads, making it suitable for alloyed and unalloyed steel, cast steel and hard plastics. Which three drill types exist? The three main drill types are metal drills, wood drills and masonry/concrete drills; the MetavCUT Body Drill belongs to the metal drill category optimised for metalworking. Why are Twist Drills pointed? The point sharpening reduces the cross‑cut at the tip, lowering friction and required feed forces while improving centring in the workpiece; this is why the MetavCUT double‑ended HSS‑G bit uses a 135° point for better performance in harder materials.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Extra Long HSS‑G Drill (Ø 8 mm, 135° Tip, Bright Finished, Fully Ground Shank, DIN 1869) A Twist Drill designed for deep metal drilling in Drilling Machines, offering an extra long length and a 135° tip for reliable penetration. Ø 8 mm for precise hole diameters Extra Long design for deep or hard‑to‑reach holes HSS‑G material for high wear resistance 135° tip angle for harder materials Fully Ground shank for high runout accuracy Exceptional deep‑hole performance for demanding metalwork This extra long HSS‑G Twist Drill is engineered to reach depths that standard drills cannot. The extended overall length and increased spiral length allow clean chip evacuation during deep drilling, reducing the need to retract frequently. As a result, the tool achieves efficient progress in tasks such as structural steel or thick plate drilling, where depth and steady feed are crucial. The DIN 1869 compliance guarantees suitable geometry for deeper holes under challenging conditions. Faster cutting with lower feed forces thanks to precision grinding A fully ground geometry and CNC‑refined flutes give the bit a sharp profile that cuts more efficiently. The ground design enables up to 40% faster drilling and requires significantly less axial force compared with rolled HSS bits, which is particularly beneficial for handheld or smaller drilling machines where operator control matters. The 135° Tip improves centring and reduces walking on hard substrates, helping to produce cleaner bores with less rework. Robust material choice and targeted applications Made from HSS‑G, this Twist Drill is suited for alloyed and unalloyed steel, cast steel, grey cast iron, sintered iron, non‑ferrous metals and hard plastics. The material selection balances hardness and toughness for high performance in metalworking. For stationary drilling with coolant and controlled feeds the bit excels; note that ground drills can be more brittle, so proper clamping and cooling extend tool life and maintain hole quality. Designed for accuracy and machine compatibility The bright finished surface and fully ground shank ensure consistent clamping and minimal runout, supporting precise machining outcomes. The geometry tailored by the DIN 1869 standard promotes repeatable centring and stability in common Drilling Machines. Users seeking clean, concentric holes with reduced radial deviation will benefit from the bit's tight manufacturing tolerances and sharp cutting edges. Strongly recommended: Choose the MetavCUT Twist Drill for deep metal drilling and contact METAV Werkzeuge for expert technical advice — Email info@metav‑werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 32080‑FDA Diameter: 8 mm Tip Angle: 135° Execution / Type: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS‑G Standard: DIN 1869 Spiral Length: 165 mm Overall Length: 240 mm Application: Drills for metal For Machine Type: Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for The MetavCUT Twist Drill is intended primarily for metals such as alloyed and unalloyed steel, cast steel and grey cast iron; it is also usable in non‑ferrous metals and hard plastics, delivering accurate holes when used with appropriate coolant and feed rates. How should the MetavCUT Twist Drill be used to maximise tool life For best results with the MetavCUT Twist Drill, use steady feeds, adequate clamping and cutting fluid for heat removal; the ground HSS‑G geometry cuts efficiently but benefits from controlled machining conditions to avoid chipping. For what is a Twist Drill used A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. This form is easy to regrind and withstands higher loads while enabling deep, precise holes under demanding conditions. Which three drill types exist There are three main drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills pointed Pointing reduces the cross‑cut at the tip. By re‑pointing, friction forces are significantly lowered so that less feed force is required and the tip centres more reliably in the workpiece. Can a Twist Drill be used for wood A metal Twist Drill can be used in wood but offers poorer guidance and a less clean finish; however, these drills are easier to regrind and have less aggressive self‑feeding than specialised wood bits. At which depths is the Twist Drill most used A through hole in solid material is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 8 mm, 135° Point Angle, Extra Long, Bright Finished, HSS-G (DIN 1869) by MetavCUT The Twist Drill is an extra long Twist Drill designed for deep metal drilling with a 135° point angle for use in Drilling Machines. 8 mm Diameter for precise metal drilling Extra-Long Design for deep or hard-to-reach holes 135° Point Angle for harder materials HSS-G Fully Ground for fast, accurate cuts DIN 1869 Standard for deep-hole drilling reliability Drill Deeper with Consistent Precision The Twist Drill Extra-Long construction provides an extended Overall Length of 305 mm and a Spiral Length of 210 mm, enabling reliable Deep Drilling where standard tools fall short. This geometry is especially useful when access is limited or when holes must be made from a greater distance; the Longer Reach reduces the need for extensions and preserves alignment. The 8 mm Diameter maintains good rigidity while allowing fine control, so each hole stays true and Repeatable even at depth. Built for Hard Materials and Stable Entry Equipped with a 135° Point Angle, this Twist Drill penetrates harder materials with reduced walking and improved centring. The HSS-G Material and CNC grinding process create very sharp cutting edges and high Roundness Accuracy, producing clean bore surfaces in alloyed and unalloyed Steel, Cast Steel, Grey Cast Iron and Non-Ferrous Metals. Note that the ground geometry offers excellent precision but requires appropriate coolant and often stationary or guided use to avoid brittle breakage. Faster Drilling with Lower Feed Forces The Fully Ground flute geometry of this Drill allows up to 40% faster drilling and can require up to 50% less feed force compared with conventional rolled HSS designs. This reduction in Thrust improves operator comfort and extends tool life under the right conditions. Conforming to DIN 1869, the deep-spiral form supports effective chip evacuation during long bores and reduces the risk of chip packing that can stall the cut. Reliable Choice for Workshop and Production Use Designed for use in Hand Drills and Drilling Machines, the MetavCUT Extra-Long Twist Drill suits workshop environments and stationary machines where repeatability and reach matter. Professionals who machine thicker components or require access past fixtures will value the combination of Precision and Reach. The Standard Line modelling focuses on robust everyday performance and predictable results in series or single-part production. MetavCUT recommends this Twist Drill for demanding deep-hole metalworking tasks — for expert advice and to verify suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33080-FDA Diameter: 8 mm Point Angle: 135° Type / Execution: Extra Long Colour / Finish: Bright Finished Shank Execution: Fully Ground Material: HSS-G Standard: DIN 1869 Overall Length: 305 mm Spiral Length: 210 mm For Machine: Drilling Machine Model Series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill is primarily applied for machining high-strength materials and larger bore diameters; it performs well in alloyed and unalloyed Steel, Cast Steel and Non-Ferrous Metals. Its ground spiral geometry is easy to regrind and withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types exist? In general tool classification you will find Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for metalworking applications. Why are Twist Drills pointed? The pointing reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction and therefore the required feed force; this sharpening also improves centring of the tip in the workpiece for a more accurate start. Can a Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with wood-specific bits. Metal Drills are easier to resharpen and have less self-feeding action, so results in Wood are acceptable but not optimal. For which drilling depths is the Twist Drill most commonly used? A full-penetration bore is often executed with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm this type of tool is the most frequently used option for reliable deep-hole drilling. What is better, HSS or HSSE? The common assumption that HSSE steels are universally superior to HSS is not correct. When choosing, evaluate whether the specific work conditions justify the higher cost of HSSE; MetavCUT supplies HSS-G variants that balance performance and economy for many metalworking tasks.
8mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 8 mm, 135° Tip Angle, Extra Long • Bright Finished • HSS‑G • DIN 1869 The Twist Drill is an extra‑long HSS‑G metal drill for deep, precise holes with a Drilling Machine, optimised for hard materials and demanding shop use. Extra‑long design for deep drilling CNC‑ground HSS‑G for precise, clean holes 135° Tip Angle suited for hard materials Fully ground shank for excellent concentricity Consistent deep-hole performance for demanding metalwork The MetavCUT extra‑long design delivers reliable drilling when access is restricted or when through‑holes must be produced without multiple setups. With a Total Length 390 mm and a Spiral Length 265 mm, this twist drill enables drilling of extended depths while maintaining steady chip evacuation. The elongated geometry reduces the need for extensions or stepped drilling, which saves time in production and lowers fixture complexity. For machinists seeking reproducible deep holes, the geometry is designed to balance stiffness and Reach. Sharp geometry and material for hard, alloyed steels Made from HSS‑G and finished by CNC grinding, the bit combines toughness with cutting precision. The 135° Tip Angle reduces cutting forces in harder materials such as stainless and tempered steels, improving centring and lowering the risk of workpiece deformation. Grinding the Flutes produces a sharp cutting edge and high runout accuracy, which results in cleaner bores and more consistent hole tolerances. For operators less familiar with grind types: CNC grinding means the Flute geometry is cut rather than rolled, giving higher Dimensional Precision at the cost of slightly increased brittleness — therefore cooling and appropriate speeds are recommended. Recommended applications, handling and compatibility This metal drill is intended for drilling in legated and unlegated Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics under workshop conditions. It is optimised for use in a Drilling Machine and benefits from controlled speeds, steady feed and coolant for prolonged life. The Fully Ground Shank improves clamping concentricity in chucks, reducing runout and vibration. As a practical tip: when working deep, ensure adequate Chip Evacuation and periodic pecking or coolant supply to prevent clogging and premature wear. Choose the MetavCUT Twist Drill for demanding deep metal drilling — for technical advice or to check suitability for a specific application contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT Diameter: 8 mm Total Length: 390 mm Spiral Length: 265 mm Tip Angle: 135° Execution: Extra long Colour / Finish: Bright finished Shank: Fully ground Material: HSS‑G Standard: DIN 1869 Application: Drills for metal / for Drilling Machine Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (metal Twist Drill) is primarily designed for machining high‑strength and alloyed steels and larger bore diameters; its extra‑long design and HSS‑G material make it suitable for deep holes and applications requiring precise hole geometry. Can the MetavCUT Twist Drill be used in a bench or handheld drill? The MetavCUT Twist Drill is optimised for use in a Drilling Machine; it can be used in powerful benchtop machines but, due to its length and ground construction, handheld use is not recommended for safety and accuracy reasons. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and large bore diameters. Its form allows relatively easy regrinding and it endures higher loads, making it suitable for tough metalworking tasks. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Masonry/Concrete Drill. Why are twist drills pointed? Pointing reduces the cross‑edge at the tip of the twist drill. By pointing, friction forces are significantly lowered so reduced feed forces are required, and the tip centres better in the workpiece. Can you drill wood with a metal twist drill? A metal drill can be used in wood, but guidance is poorer and hole quality is inferior. Metal bits are easier to regrind and have less self‑feed, so results may be acceptable for non‑critical wooden applications. At which drilling depths is the twist drill most used? Twist Drills are the standard tool for through holes and are most commonly used up to diameters of about 20 mm and drilling depths up to 100 mm; extra‑long variants extend that capability for deeper bores. Which is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is incorrect. Evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for the required application.
8mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — Drill Bit, Diameter 8 mm, 118° Tip Angle, HSS‑G, Fully Ground, Silver, DIN 338 The Twist Drill is a precision Drill Bit for metalworking, offering an 8 mm Diameter and a 118° Tip Angle for reliable centring and clean holes in a variety of metals. Ideal for metalworking applications with high precision Fully ground geometry for faster, cleaner drilling Hexagonal shank for secure torque transmission Conforms to DIN 338 for standardised short Twist Drills Suitable for use in Drilling Machines and handheld drills Faster, cleaner holes thanks to fully ground geometry The Twist Drill uses a Fully Ground HSS‑G construction that produces very sharp cutting edges and high runout accuracy. This manufacturing method (CNC grinding) enables up to 40% faster drilling and requires approximately 50% less feed force compared with rolled HSS bits, which translates into less operator fatigue and shorter cycle times. The grounded flute geometry also yields cleaner, more precise holes particularly in alloyed and unalloyed steel and other hard materials. Secure clamping and improved torque transfer with a hexagonal shank A Hexagonal Shank (sechskant) ensures form‑fit torque transmission into Bit Holders and quick‑change chucks, reducing slippage during heavy cutting. The shank design allows direct use in 1/4" bit holders (E6.3) while remaining compatible with standard chucks, which simplifies tool changes and increases workplace efficiency. For mobile setups and cordless drivers, the hex shank provides safer engagement under higher loads. Material choice and geometry tuned for metalworking Made from HSS‑G (high speed steel, ground), the bit offers a balance of hardness and toughness for drilling metals such as steel, cast iron, non‑ferrous metals and certain engineering plastics. The 118° Tip Angle favours easier penetration and better centring in softer metals like aluminium, while the overall bit geometry remains versatile for a wide range of workshop tasks. Note that fully ground HSS can be more brittle than rolled variants; therefore, recommended use is with adequate cooling and in appropriate drilling setups to maximise service life. Practical use cases and handling recommendations Experienced machinists and maintenance technicians will appreciate the combination of DIN 338 conformity and standardised lengths that support repeatable setups on both stationary and portable machines. For best results, use the correct cutting speed for the material and apply coolant when machining harder alloys. The bit is well suited to production tasks and repair work where precision and repeatability are required rather than rough or one‑off woodworking applications. For precision metalworking applications choose the MetavCUT Twist Drill for reliable performance — for expert advice or to confirm suitability contact METAV Werkzeuge by eMail: info@metav-werkzeuge.com, phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 57080-FDA Diameter: 8 mm Tip Angle: 118° Material: HSS-G Execution: fully ground Colour: silver For Drilling Machine: Drilling Machine (Handbohrmaschine) Spiral Length: 70 mm Shank: Hexagonal Overall Length: 135 mm Norm: DIN 338 Model Series: Standard Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill suitable for? The MetavCUT Twist Drill, a precision Drill Bit made from HSS‑G, is intended primarily for metalworking and performs well in alloyed and unalloyed steels, cast iron, non‑ferrous metals and some hard plastics; for the hardest materials, follow recommended speeds and cooling practices. How should the MetavCUT Twist Drill be clamped and operated for best life? Clamping the MetavCUT Twist Drill in a properly sized chuck or a 1/4" bit holder for the Hexagonal Shank ensures secure torque transfer; use correct cutting speeds, steady feed and coolant as needed to reduce wear and avoid brittle failure. What is a Twist Drill used for? A Twist Drill is mainly applied when working on high‑strength materials and larger drill diameters; the ground flute geometry makes it easier to grind and yields precise holes that withstand higher loads. Which three drill types are there? The main drill types are Metal Drills, Wood Drills, and Stone/Concrete Drills. Why are Twist Drills point‑sharpened? Point‑sharpening reduces the chisel edge at the tip, significantly lowering friction and thus the required feed forces, while improving centring of the bit in the workpiece. Can a Metal Drill be used in Wood? A Metal Drill can be used in Wood, but it offers less guidance and a less clean finish compared with dedicated wood bits; however, such drills are easier to resharpen and have lower self‑feeding tendency. For which drilling depths is the Twist Drill most commonly used? A solid bore is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE is always superior to HSS is not universally true; decide based on your specific working conditions to determine whether the higher cost of HSSE is justified.
8mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Hohe Bohrleistung und reduzierte Anpresskraft machen den MetavCUT Profi Line Spiralbohrer zur effizienten Wahl für anspruchsvolle Metallbearbeitung; die linksschneidende Ausführung erleichtert zudem das Ausbohren festsitzender Schrauben. Profitieren Sie von HSS‑G Material, 135° Spitzenwinkel und der Normkonformität nach DIN 338 für sichere Ergebnisse und unkomplizierten Einsatz, bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer – MetavCUT Profi Line Der Spiralbohrer von MetavCUT ist ein kurzer HSS‑G‑Bohrer, linksschneidend und spezialisiert auf Metallbohrungen sowie das Ausbohren festsitzender Schrauben. Kurzer HSS‑G‑Bohrer nach DIN 338 Linksschneidend für Ausbohren festsitzender Schrauben Spitzenwinkel 135° für harte Werkstoffe Für Handbohrmaschine geeignet, Zylinderschaft Verpackungseinheit 10 Stück industrielle Qualität Dauerhafte Schneidleistung durch HSS‑G für konstante Produktivität Der Einsatz von HSS‑G sorgt für hohe Zähigkeit und thermische Beständigkeit bei Bohrvorgängen in Stahl und Gusswerkstoffen. Weil das Material höhere Temperaturen und Belastungen aushält, bleibt die Schneideform länger erhalten, wodurch weniger Nachschärfen nötig ist und Ausfallzeiten reduziert werden. Ein konkreter Nutzen ist die verlängerte Standzeit bei Serienarbeiten, die Kosten pro Bohrung senkt und die Effizienz in der Werkstatt erhöht. Linksschneidend: Spezifische Lösung für festsitzende Schrauben und schwierige Fälle Die linksschneidende Ausführung ist speziell dafür gedacht, bei Linkslauf gebrochene Schrauben zu lösen und Ausbohrungen zu erleichtern. In Kombination mit moderater Kühlung und kontrolliertem Vorschub reduziert sich die Gefahr von Verkanten und Bruch. Anwender profitieren von einer höheren Treffergenauigkeit beim sicheren Entfernen von Schraubenresten und von kürzeren Rüstzeiten bei Reparaturarbeiten. Präzision und Normkonformität für industrielle Anforderungen Die Einhaltung der DIN 338 gewährleistet reproduzierbare Abmessungen und Schaftgeometrie, was den sofortigen Einsatz in definierten Spannsystemen ermöglicht. Der 135° Spitzenwinkel wurde gewählt, um das Anbohren in harten Werkstoffen zu erleichtern und die Zentrierkraft zu erhöhen. Für Anwender bedeutet dies weniger Ausläufer beim Ansetzen und eine zuverlässigere Maßhaltigkeit bei Passungen und Nachbearbeitung. Praxistipps für sicheren Einsatz und hohe Prozesssicherheit Mit einem Durchmesser von 8 mm fällt der Bohrer in den Standardbereich für Werkstattanwendungen; vorbohren ist in der Regel nicht erforderlich, bei hoher Genauigkeit empfiehlt sich jedoch Anpunkten mit einem Zentrierbohrer. Die Verwendung einer Handbohrmaschine mit Linkslauf wird vorausgesetzt, wenn die linksschneidende Funktion genutzt werden soll. Kühlemittelgabe und moderate Drehzahlen verlängern die Standzeit und reduzieren das Risiko von Überhitzung. Sichern Sie sich den MetavCUT Profi Line Spiralbohrer für präzise Metallbearbeitung direkt bei Metav – bei Fragen stehen wir per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung. Produktmerkmale Artikelnummer: 60080-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Profi Line Fakten Durchmesser: 8 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, gehärtet) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Ausführung: linksschneidend (Anwendung: Ausbohren festsitzender Schrauben) Für Bohrmaschine: Handbohrmaschine SKU: 60080-FDA FAQ Wie unterscheidet sich der MetavCUT Profi Line Spiralbohrer von Standardbohrern? Der MetavCUT Profi Line Spiralbohrer verfügt über HSS‑G Material und eine linksschneidende Geometrie; dadurch bietet er erhöhte Standzeit und spezielle Einsatzmöglichkeiten beim Ausbohren festsitzender Schrauben im Vergleich zu konventionellen HSS‑Bohrern. Kann ich den Bohrer mit einer gewöhnlichen Akku‑Bohrmaschine verwenden? Der Bohrer ist für die Verwendung mit einer Handbohrmaschine vorgesehen; für die linksschneidende Funktion ist jedoch eine Bohrmaschine mit Linkslauf erforderlich, sonst entfällt der Vorteil beim Ausdrehen von Schraubenresten. Für welche Werkstoffe ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe, wobei HSS‑G die thermische Belastung bei Metallbearbeitung verbessert. Welche Vorteile bietet der Spitzenwinkel von 135°? Ein Spitzenwinkel von 135° reduziert das Wandern beim Anbohren harter Werkstoffe und verbessert die Zentrierung, wodurch besonders bei Edelstahl und gehärteten Stählen das Eindringen erleichtert wird. Ist der Bohrer einzeln oder nur im Zehnerpack erhältlich? Dieser Artikel wird als Verpackungseinheit mit 10 Stück angeboten; Details zur Verfügbarkeit und Einzellieferung erhalten Interessenten über Metav direkt.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N short – 8 mm, HSS‑G, 135°, bright finished (DIN 338) by MetavCUT The Twist Drill Type N short is a high‑performance metal drilling bit for drilling machines, designed for precise, stable holes in steel and other hard materials. Short design for high stability when drilling metal Ground HSS‑G for up to 40% faster drilling 135° tip angle optimised for harder materials Fully ground shank for secure clamping and concentricity Faster, easier drilling thanks to ground HSS‑G and optimized geometry The HSS‑G construction of this Twist Drill delivers tangible productivity gains: the ground High‑Speed Steel enables up to 40% faster drilling while requiring around 50% less feed force than conventional HSS tools. With an 8 mm Diameter and a 135° Tip Angle, this bit penetrates hard materials more reliably, reducing dwell time and wear on the tool. For professionals focused on cycle time and repeatable results, the combination of material and geometry translates directly into increased throughput and lower operator effort. Stable, precise holes from the short design and fully ground shank A shorter Overall Length and a fully ground shank improve rigidity and reduce deflection during drilling. This Twist Drill’s compact execution is particularly suitable for work on lathes, milling centres and hand drilling machines where tool overhang must be minimised. The result is cleaner hole walls and better positional accuracy, which benefits fabrication, assembly and maintenance tasks that demand tight tolerances. Built for metalworking — Type N normal spiral explained This Type N Normal Spiral is the classic configuration for metal drills and was chosen for its balanced chip evacuation and cutting action. According to DIN 338, the short design with a cylindrical shank is intended for robust, stationary or portable drilling in metal. For users less familiar with the terminology: Type N means a general‑purpose metal drill, and short refers to reduced length for improved stiffness and repeatability. Practical advantages and who benefits most Workshop technicians, maintenance crews and metal fabricators will appreciate the combination of durability and ease of use: the bright finished surface improves initial seating and handling, while the 75 mm Spiral Length and 117 mm Overall Length match typical requirements for through and blind holes in plate and component work. For demanding alloys, cast materials and engineering plastics the tool offers longevity and predictable performance, making it a dependable choice for daily production tasks. MetavCUT recommends this HSS‑G short Type N Twist Drill for professional metalworking — for tailored advice or to confirm suitability for your application contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 27080-FDA Diameter: 8 mm Tip angle: 135° Material: HSS‑G Type: Typ N Execution: short Shank finish: fully ground Spiral length: 75 mm Overall length: 117 mm Colour: bright finished For drilling machine: Drilling Machine Standard: DIN 338 Model series: Basic Line Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Twist Drill Type N are primarily used for the machining of high‑strength materials and for larger drill diameters. The short, ground HSS‑G design makes this Twist Drill robust under heavy loads and suitable for applications where fast penetration and durability are required. Which 3 drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for use in metalworking applications.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill by MetavCUT — Type N short, Ø 8 mm, 135° point angle, Bright finished, HSS‑G, DIN 338 The Twist Drill Type N short is a compact HSS‑G drill bit designed for precise metalworking tasks in hand and stationary drilling machines. MetavCUT Twist Drill Type N Ø8 mm Short design for greater stability 135° point angle for hard metals HSS‑G fully ground for precise holes DIN 338 compliant for industrial use Faster, more stable drilling in demanding metalwork Dank der short design reduziert dieser Twist Drill das Auskragen aus dem Bohrfutter und minimiert somit Vibrationen und Verbiegen. Die verringerte Auskraglänge führt zu höherer Stability und damit zu gleichmäßigeren, maßhaltigen Bohrlöchern. Als Folge werden Bearbeitungszeiten verkürzt und die Anforderungen an die Werkzeugspannung im Alltag verringert, was besonders bei wiederholten Serienbohrungen spürbare Produktivitätsvorteile liefert. Sharp, ground geometry for clean, precise holes Die HSS‑G Ausführung mit CNC‑geschliffener Spirale sorgt für sehr scharfe Schneidkanten und hohen Rundlauf. Im Vergleich zu gewalzten Bohrern ermöglicht der Schleifprozess sauberere Spanabfuhr und glattere Bohrflächen, was die Nachbearbeitung minimiert. Diese präzise Geometrie ist besonders vorteilhaft beim Bohren in legierte und unlegierte Stähle, Gusswerkstoffe sowie Hartkunststoffe. Engineered for metals and professional workshop use Dieser Twist Drill des Typs Type N ist nach DIN 338 klassifiziert und wurde primär für Metallbearbeitung konzipiert. Er eignet sich für Temperguss, Gusseisen, Sintereisen, Nichteisenmetalle und legierte Stähle. Für Handwerker, Instandhalter und Metallwerkstätten bedeutet das: ein universelles, robustes Werkzeug für den täglichen Einsatz bei stationären oder mobilen Bohrmaschinen. Practical handling tips for longer tool life Beim Einsatz empfiehlt sich Kühlung und angepasste Schnittgeschwindigkeit, um Bruchgefahr bei geschliffenen HSS‑Bohrern zu reduzieren. Die 135° point angle erleichtert das Anbohren harter Werkstoffe, da der Anbohrvorgang verkürzt wird und die Spitze besser zentriert. Kurze Überhänge und ein sauber gespanntes Werkstück minimieren Feed‑Kräfte und erhöhen die Standzeit des Bohrers. Strong recommendation: Choose the MetavCUT short Twist Drill for precise, high‑stability metal drilling — for personal advice and technical support contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 45080-FDA Diameter: 8 mm Overall length: 117 mm Spiral length: 75 mm Point angle: 135° Type: Type N Execution: short Shank: fully ground Material: HSS‑G Surface / Colour: Bright finished Standard: DIN 338 For: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill and for which materials is it suitable? The MetavCUT Twist Drill Type N short is primarily used for drilling in metal; it is designed for high‑strength materials and larger diameters, offering good performance in alloyed and unalloyed steel, cast steel, cast iron and hard plastics. Which three drill types are commonly distinguished? Common drill categories are metal drill bits, wood drill bits and stone/concrete drill bits, with the MetavCUT Twist Drill belonging to the metal drill bit group. Why are twist drills split (point relieved)? The splitting reduces the cross‑cut at the tip, which lowers friction and requires less feed force; additionally, the modified tip improves centring in the workpiece. Can a metal twist drill be used to drill wood? A metal drill bit such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood bits; metal bits are easier to re‑grind and show less self‑pulling. For which drilling depths is a twist drill most commonly used? A through hole in solid material is typically made with a twist drill; for diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most frequently used tool. Is HSS or HSSE better for drilling? A general assumption that HSSE steels are always superior to HSS is incorrect; selection should be based on specific working conditions to determine whether the higher price of HSSE is justified.
8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, 8 mm · 135° Tip · Bright Finished · HSS-G · DIN 338 by MetavCUT The Twist Drill is a short Type N metalworking drill designed for precision drilling in steels and other hard materials with Drilling Machines. Short HSS-G body for increased stability 135° tip for clean entry in hard materials Fully ground shank for precise chucking Conforms to DIN 338 for consistent dimensions Bright finished surface for smooth chip evacuation Greater Stability and Faster Drilling for Metalworking Short design and HSS-G construction make this twist drill ideal where rigidity matters. Because the overall protrusion from the chuck is reduced, the tool shows less deflection under load, resulting in straighter holes and longer tool life when used correctly. The inherent material properties of HSS-G allow higher cutting speeds compared with conventional HSS, which translates into faster hole making and reduced machining time. For workshop and production environments this means fewer rejects and more consistent process control. Precise Entry and Reduced Burrs with a 135° Tip A 135° point angle significantly improves centring and reduces the tendency to wander on tougher surfaces. This geometry lowers the radial forces during entry, which decreases burr formation and the need for secondary deburring operations. In practice, the Type N spiral geometry combined with the larger tip angle is particularly suited to stainless steels and tempered alloys where a sharper angle would blunt quickly. For engineers and tradespeople, this results in more reproducible hole quality in demanding materials. Exact Fit and Reliable Performance from the Fully Ground Shank The fully ground cylindrical shank ensures superior concentricity in the chuck, improving runout and surface finish of the drilled hole. The fully ground shank also simplifies regrinding and refurbishment, keeping the tool serviceable over several maintenance cycles. The bright finished surface aids chip flow and inspection, helping operators spot wear earlier and maintain process stability. These features together deliver consistent results when mounted in stationary or portable drilling equipment. Optimised Dimensions and Compliance for Industrial Use With a drill Diameter of 8 mm, Spiral Length 75 mm and Overall Length 117 mm, the tool follows the short drill conventions described in DIN 338, giving compatibility with standard tool holders and replacement policies. The combination of short spiral length and robust construction suits applications on both bench and machine tools where precise, repeatable holes in metal are required. For production planners this means easier tool inventory management and predictable cycle times. Who Benefits from This Short HSS Twist Drill Workshops, toolrooms and industrial maintenance teams benefit most from a short, stable drill that performs reliably in steels, cast materials and non-ferrous metals. Because the short twist drill design reduces vibration and improves hole accuracy, it is particularly advantageous for setups with limited clearance or when working on jigged and clamped assemblies. The tool is well suited to both experienced machinists seeking predictable performance and procurement managers who prioritise conformity to standards like DIN 338. Strong recommendation: choose the MetavCUT short HSS-G Twist Drill for precise metal drilling and consult METAV Werkzeuge for tailored technical advice — Email info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill (Short Spiralbohrer) Brand: MetavCUT SKU: 48080-FDA Diameter: 8 mm Point Angle: 135° Type: Type N Material: HSS-G Execution: Short Spiral Length: 75 mm Overall Length: 117 mm Shank Finish: Fully ground Surface Finish: Bright finished For Use With: Drilling Machine (Handbohrmaschine) Standard: DIN 338 Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What makes a short twist drill different from a standard one? A short twist drill such as the MetavCUT Short Type N offers a reduced overhang and therefore higher rigidity compared with standard-length drills. This increases stability and improves hole accuracy in metalworking applications while reducing the risk of drill bending and chatter. Can the MetavCUT Twist Drill be used in a hand drilling machine? The MetavCUT Twist Drill is intended primarily for machine use, but it can be operated in heavy-duty handheld Drilling Machines when the setup is rigid and appropriate coolant is applied. For manual drilling in delicate tasks a dedicated hand-oriented bit may provide easier control. For what is a Twist Drill used? A Twist Drill is mainly used for machining high-strength materials and larger hole diameters. This form is easy to regrind and withstands considerable loads while delivering clean, precise holes suitable for subsequent tapping or finishing. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Each group is optimised for its material class and differs in point geometry, flute design and substrate material.
8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short Twist Drill) — 8 mm, 118°, TIN-coated, Short, DIN 338, HSS-G The MetavCUT Twist Drill is a short Twist Drill designed for precise metalworking with an 8 mm diameter and a 118° point angle for reliable centring in a wide range of metals. MetavCUT Twist Drill short 8 mm TIN-coated for reduced friction and longer life HSS-G fully ground for precise metal drilling 118° Point angle for reliable centring Conforms to DIN 338 for short twist drills Faster, more precise metal drilling with reduced effort The short design delivers higher stability and less deflection compared with longer drills, which translates into cleaner holes and fewer rejects when working with metal. The HSS-G (ground high-speed steel) geometry enables up to 40% faster drilling and requires around 50% less feed force than conventional HSS drills; this reduces operator fatigue and shortens cycle times in production environments. The combination of short overhang and a fully ground flute results in improved runout accuracy, especially when used in a stable drilling set-up such as a drilling machine. Durable coating and optimised geometry for longer tool life A TIN-coated surface significantly lowers friction and helps to reduce wear when machining alloyed and unalloyed steels, cast materials and non-ferrous metals. With appropriate cooling, the Titanium Nitride layer increases service life and keeps cutting edges sharper for longer, so fewer tool changes are needed. The 118° point angle eases centring on slightly curved or coated surfaces and balances entry aggressiveness with edge strength, which is beneficial when drilling materials like aluminium, copper and hard plastics. Engineered for metal: materials and standards explained Conformity to DIN 338 indicates this tool is a short twist drill with a cylindrical shank manufactured from HSS and produced either by grinding or rolling; the MetavCUT version is ground, which provides very sharp cutting edges and high concentricity. Ground drills excel in metalworking because the flute geometry and primary cutting edges are precise, producing accurate hole dimensions and improved surface finish. Note: ground HSS drills can be more brittle than rolled types and perform best with steady clamping and adequate cooling. Practical use cases and operator guidance This Twist Drill is intended primarily for drilling metal on stationary or portable drilling machines and is suitable for machinists, toolrooms and maintenance shops requiring reproducible, high-quality holes. For best results use moderate spindle speeds, apply a suitable coolant for steels and clamp the workpiece securely. The fully ground shank eases chuck gripping and reduces slippage. If uncertain whether this drill meets specific requirements or if additional technical data is needed, METAV Werkzeuge offers expert support and consultation to help select the correct tool and machining parameters. We recommend the MetavCUT short Twist Drill for precision metalworking — for personalised advice contact METAV Werkzeuge by email info@metav-werkzeuge.com or phone +49 2822 7131930 (WhatsApp +49 170 2837271) Technical Specifications Designation: Twist Drill Marke: MetavCUT SKU: 28080-FDA Diameter: 8 mm Point angle: 118° Type / Execution: short Coating / Colour: TIN-coated Spiral length: 75 mm Overall length: 117 mm Shank execution: fully ground Material: HSS-G Standard: DIN 338 Application: Drills for metal For drilling machine: drilling machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is mainly applied to the machining of high-strength materials and larger diameters; its shape is easy to regrind and it withstands significant loads, making it especially suitable for metalworking and demanding applications. Which three drill types exist? Drill types are commonly categorised as metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill category and optimised for that purpose. Is there anything else you need to determine whether this tool suits your process? Are additional dimensions or speed recommendations required? METAV Werkzeuge provides comprehensive and competent advice — feel free to contact us by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271
8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Die Kombination aus HSS-G Material, TiN-Beschichtung und kurzer Ausführung sorgt für präzise Bohrungen und höhere Standzeit bei Metallbearbeitung. Nutzen Sie die erhöhte Stabilität und die optimierte Schneidgeometrie zur Effizienzsteigerung in der Werkstatt. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – kurze Ausführung für Metall Spiralbohrer von MetavCUT in kurzer Ausführung eignet sich für präzise Bohrungen in legierten und unlegierten Stahl sowie Guss- und Nichteisenmetallen Spiralbohrer Typ N für Metallbearbeitung HSS-G geschliffen für präzise Bohrungen TiN-Beschichtung reduziert Verschleiß Kurze Ausführung für hohe Stabilität Geeignet für Handbohrmaschine und Werkstatt Robuste Beschichtung und Material für längere Standzeit Aufgrund des HSS-G Werkstoffs in Kombination mit der TiN-Beschichtung wird die Reibung beim Bohren reduziert und die Lebensdauer des Werkzeugs erhöht. Diese Eigenschaft führt zu weniger Werkzeugwechseln und damit zu besserer Auslastung der Maschine und geringeren Betriebskosten. Anwender profitieren insbesondere bei häufigen Bohrzyklen in Stahl und Guss durch gleichbleibende Bohrbildqualität und reduzierte Nacharbeit. Kurze Ausführung für höhere Präzision und Stabilität Die kürzere Gesamtlänge reduziert die Auskraglänge und damit das Risiko von Schwingungen und Durchbiegung während des Bohrens. In Kombination mit der geschliffenen Fertigung nach DIN 338 ergibt sich eine hohe Rundlaufgenauigkeit, die saubere Bohrlöcher ermöglicht. Der 135° Spitzenwinkel unterstützt das Anbohren harter Werkstoffe und verringert das Ausreißen bei Ein- und Austritt. Effiziente Bohrleistung und geringerer Kraftaufwand Durch die geschliffene Geometrie lässt sich das Material schneller schneiden; das Werkzeug ermöglicht laut Herstellerangaben bis zu 40% schnelleres Bohren bei gleichzeitig bis zu 50% weniger Anpresskraft. Das resultiert in kürzeren Durchlaufzeiten und weniger Ermüdung für Bediener. Diese Effizienz zahlt sich bei Serienarbeiten und Instandsetzungen aus, wenn Präzision und Produktionsgeschwindigkeit gefragt sind. Vielseitiger Einsatz und Anwenderempfehlung Für Werkstätten, Montagebetriebe und Handwerk ist diese kurze Ausführung ideal geeignet, wenn stationäre oder handgeführte Maschinen zum Einsatz kommen. Der Bohrer ist besonders für den Standard-Bereich mit 2 mm bis 13 mm Durchmesser ausgelegt und deckt typische Metallarbeiten zuverlässig ab. Anwender mit Bedarf an hoher Präzision und Stabilität erhalten mit diesem Werkzeug eine praxisgerechte Lösung für vielfältige Metallanwendungen. Wählen Sie den MetavCUT Spiralbohrer aus der Standard Line für zuverlässige Metallbohrungen und kontaktieren Sie bei technischen Fragen unser Team per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 für persönliche Beratung Produktmerkmale Artikelnummer: 46080-FDA Hersteller: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 338 Material: HSS-G Farbe: TIN-beschichtet Ausführung: kurz Schaftausführung: geschliffen Typ: Typ N Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Fakten Durchmesser: 8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Beschichtung: TIN-beschichtet (Titan-Nitrid, erhöhte Verschleißfestigkeit) Schaftausführung: geschliffen Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale für Metall) Hersteller: MetavCUT Modellserie: Standard Line Ausführung: kurz Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer Standard Line (SKU 46080-FDA) ist ausgelegt für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und eignet sich ebenfalls für Hartkunststoff. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und die Zylinderschaft machen den MetavCUT Spiralbohrer Standard Line geeignet für den Einsatz in Handbohrmaschine und stationären Maschinen, sofern auf Rundlauf und geeignete Spannaufnahme geachtet wird. Welche Vorteile bringt die TiN-Beschichtung in der Praxis? Die TiN-Beschichtung des MetavCUT Spiralbohrers reduziert Reibung und Verschleiß, was die Standzeit erhöht und die Wärmeentwicklung beim Bohren verringert; das führt zu gleichmäßigeren Bohrungen und weniger Werkzeugwechseln. Welche Bohrparameter werden empfohlen für 8 mm in gehärtetem Stahl? Für den MetavCUT Spiralbohrer mit 8 mm Durchmesser und 135° Spitzenwinkel empfiehlt sich reduzierte Schnittgeschwindigkeit und ausreichende Kühlmittelzufuhr; bei Unsicherheit die Herstellerangaben und Maschinenleistung prüfen. Wie beeinflusst die geschliffene Ausführung die Bohrqualität? Die geschliffene Geometrie des MetavCUT Spiralbohrers (HSS-G) sorgt für scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher und geringere Nacharbeit in der Metallbearbeitung ermöglicht.
8mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Die Kombination aus kurzer Ausführung, TIN-beschichtetem HSS-G und dem 135° Spitzenwinkel sorgt für hohe Stabilität, präzise Bohrlöcher und verlängerte Standzeit bei der Bearbeitung harter Werkstoffe. Nutzen Sie die robuste Profi Line Ausführung für präzise Metallbearbeitung und kontaktieren Sie Metav bei Fragen zur Anwendung oder Bestellung. Spiralbohrer – MetavCUT Profi Line HSS-G, kurz Der Spiralbohrer der Profi Line ist ein kurzer, geschliffener HSS-G-Bohrer mit TIN-Beschichtung für präzises Bohren in legierten und unlegierten Stählen sowie Nichteisenmetallen kurze Ausführung für höhere Stabilität HSS-G geschliffen für präzise Bohrlöcher TIN-Beschichtung reduziert Verschleiß deutlich 135° Spitzenwinkel für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen Mehr Präzision bei harten Werkstoffen dank kurzer Ausführung Durch die kurze Auskraglänge reduziert sich die Neigung zum Verbiegen, wodurch die Bohrung genaueren Rundlauf und bessere Passgenauigkeit liefert. Diese Bauart ist besonders vorteilhaft beim Bohren in legierten und unlegierten Stahl, Gusseisen und Temperguss, weil die Kraftübertragung direkter erfolgt und die Führung verbessert wird. Der geschliffene Schaft trägt zur hohen Rundlaufgenauigkeit bei. Für Anwender bedeutet das weniger Nacharbeit und konstante Qualität bei Serien oder Einzelteilen. Längere Standzeit durch Beschichtung und geschliffene Geometrie Die TIN-Beschichtung (Titan-Nitrid) verringert die Reibung und schützt den Bohrer gegen thermischen Verschleiß, insbesondere bei höheren Schnittgeschwindigkeiten und bei Einsatz von Kühlschmierstoff. In Verbindung mit dem HSS-G CNC-Schliff entstehen scharfe Schneidkanten, die saubere Bohrungsränder liefern und das Spanverhalten verbessern. Anwender profitieren von längeren Werkzeugstandzeiten und gleichbleibender Bohrqualität, was Stillstandzeiten und Werkzeugwechsel reduziert. Geeignete Anwendungen und empfohlene Einsatzweise Diese kurze Ausführung ist ausgelegt für den Einsatz an Handbohrmaschinen sowie an stationären Maschinen für präzise Metallbearbeitung. Ideal ist die Verwendung bei der Bearbeitung von Stahl, Edelstahl, Kupfer, Bronze, Neusilber und Hartkunststoffen. Vorbohren für größere Durchmesser und Kühlung bei langen Einsätzen erhöhen die Wirtschaftlichkeit. Die Norm DIN 338 klassifiziert diese Bauform und erleichtert die Auswahl kompatibler Bohrer für die Werkstatt. Handhabung, Spitzenwinkel und Sicherheitshinweise Der 135° Spitzenwinkel reduziert das Anbohren bei harten Werkstoffen und verlängert die Lebensdauer bei Anwendungen mit hohem Druck. Der geschliffene Typ N Normalspirale bietet ein ausgewogenes Verhältnis aus Schneidführung und Spanabfuhr. Beim Gebrauch sollten Drehzahl, Vorschub und Kühlschmierstoff an Material und Bohrergröße angepasst werden, um Bruchgefahr zu minimieren. Für handgeführte Anwendungen empfiehlt sich eine stabile Aufspannung und kontrollierte Vorschubkraft. Empfehlung: Setzen Sie auf die MetavCUT Profi Line mit TIN-Beschichtung für langlebige Präzision. Für technische Beratung oder Bestellung erreichen Sie Metav per E‑Mail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930. Technische Daten Artikelnummer: 41080-FDA Marke: MetavCUT Serie / Baureihe / Ausführung: Profi Line SKU: 41080-FDA Fakten Durchmesser: 8 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-G (geschliffen) – geschliffener CNC-Schliff für hohe Rundlaufgenauigkeit Farbe: TIN-beschichtet – Titan-Nitrid-Beschichtung für geringeren Verschleiß Norm: DIN 338 – kurze Spiralbohrer mit Zylinderschaft Schaftausführung: geschliffen Typ: Typ N – Normalspirale Anwendung: Bohrer für Metall Für Bohrmaschine: Handbohrmaschine FAQ Was unterscheidet den kurzen HSS-G-Bohrer von einem Standardbohrer? Die kurze Ausführung der MetavCUT Profi Line reduziert die Auskraglänge und erhöht dadurch die Stabilität. In Kombination mit dem geschliffenen HSS-G liefert der Bohrer präzisere Bohrungen und besseren Rundlauf als Standardlangbohrer. Für welche Materialien ist dieser Spiralbohrer geeignet? Der Spiralbohrer von MetavCUT eignet sich für legierten und unlegierten Stahl, Gusseisen, Temperguss, Sintereisen, Neusilber, Kupfer, Bronze und Hartkunststoffe dank der robusten Geometrie und der TIN-Beschichtung. Wie wirkt sich der 135° Spitzenwinkel auf die Bohrleistung aus? Ein Spitzenwinkel von 135° sorgt für besseren Anbohrkomfort in harten Werkstoffen und reduziert das Ausbrechen. Dadurch wird die Lebensdauer des Werkzeugs erhöht und die Bohrqualität verbessert. Ist der Bohrer für handgeführte Maschinen geeignet? Ja, die kurze Ausführung ist für Handbohrmaschine und stationäre Maschinen geeignet. Bei handgeführten Einsätzen ist auf gleichmäßigen Vorschub und sichere Aufspannung zu achten. Welche Vorteile bietet die TIN-Beschichtung konkret? Die TIN-Beschichtung der MetavCUT Profi Line reduziert Reibung und thermischen Verschleiß, was zu längeren Standzeiten führt und die Wartungsintervalle verlängert.
8mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill Spezial – 8 mm, 135° point, HSS‑G, DIN 338, with multi‑bevel cutting edge and triangular shank (MetavCUT) The Twist Drill Spezial is a precision metal drilling tool designed for drilling machines and cordless drills, optimised for hard and alloyed steels as well as a wide range of metals. High‑performance HSS‑G for durable drilling 135° point for clean starts in hard materials Triangular shank ensures secure grip in chucks Conforms to DIN 338 for standardised short twist drills Faster, more efficient metalworking for demanding tasks The specially ground HSS‑G geometry of this tool delivers up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS drills, which directly reduces operator fatigue and cycle times. This performance advantage means fewer tool changes and higher throughput in workshop environments. For fabrication and production settings where speed and repeatability matter, the reduced thrust requirement also lowers the load on cordless and stationary machines, extending battery life and reducing wear on the machine spindle. Durable material and tip design for precise, burr‑free holes Made from HSS‑G, the drill combines toughness and heat resistance to resist softening at elevated cutting temperatures; this yields longer tool life on steel and cast materials. The 135° point angle is tailored for harder workpieces and reduces walking at the start of a hole, delivering clean, burr‑free edges. The specially sharpened tip also improves centring and helps to maintain roundness of the drilled hole, which is particularly beneficial when tolerance and surface quality are critical. Wide application range and machine compatibility This Twist Drill Spezial is intended primarily for metalworking and is suitable for alloyed and unalloyed steels, cast steels, cast irons, sintered irons, non‑ferrous metals, hard plastics and even wood where a metal drill is acceptable. The triangular shank offers reliable torque transmission and is especially practical for use with cordless drills and portable machines, while compatibility with stationary drilling machines supports workshop and production use. Users who need a versatile metal drill will appreciate the balance between cutting speed and hole quality. Standards, handling and recommended use for safe results Manufactured to DIN 338, the product meets the standard definition for short twist drills with cylindrical shank, aiding selection and interchangeability. For best results use appropriate cutting fluids when drilling steels and consider slower spindle speeds for larger diameters or harder materials. The 75 mm spiral length and 117 mm overall length are optimised for through‑holes and common workshop applications; the 135° point angle shortens the initial penetration time in harder materials and improves centring during the pilot phase. MetavCUT recommends the Twist Drill Spezial for precision metal drilling — for technical advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or by phone +49 2822 7131930, WhatsApp +49 170 2837271 Precise Technical Data for Planning and Setup Designation: Twist Drill Spezial 8 mm Brand: MetavCUT SKU: 55080-FDA Type/Series: Spezial Diameter: 8 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Material: HSS‑G Shaft Execution: with multi‑bevel cutting edge and triangular shank Application: Drills for metal For drilling machine: Drilling Machine (Handbohrmaschine) Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill Spezial is mainly used for the machining of high‑strength workpieces and larger drill diameters; it is particularly suitable for alloyed and unalloyed steel, cast materials and non‑ferrous metals. The design allows easier regrinding and maintains performance under higher loads. Which 3 drill types are there? The three common drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Spezial belongs to the metal drill category and is optimised for metalworking tasks. Are you unsure whether this tool meets your requirements or need additional technical data? METAV Werkzeuge provides comprehensive, competent advice for complex or high‑precision tools — contact us by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271.
8mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G 8 mm, 135° Point, DIN 340, Bright Finished Drill Bit A Twist Drill by MetavCUT is a long HSS‑G 8 mm drill bit for drilling machines, engineered for deep, precise metal bores. Long version for deeper and hard‑to‑reach bores Fully ground shaft for high concentricity and clean holes 135° point angle optimised for harder materials Conforms to DIN 340 for consistent overall length and quality Bright finished surface for corrosion resistance and easy chip evacuation High‑performance geometry for efficient metal drilling The long HSS‑G design combines extended reach with a ground spiral that provides faster penetration and reduced required feed force compared with rolled bits. This construction is particularly advantageous when working with alloyed and unalloyed steels, cast materials and hard plastics: the fully ground flute geometry yields sharp cutting edges and excellent runout accuracy. For users who need deeper bores or access to recessed holes, the extended overall length ensures reach without compromising hole quality. Cleaner holes and better centring on tough workpieces A 135° point angle reduces walking and improves centring when entering tough materials such as stainless steel. The reduced chisel edge from the point geometry lowers friction and allows for smoother entry, meaning less burr formation and cleaner bores. When paired with appropriate coolant and moderate speeds, the bit delivers precise, repeatable results that decrease post‑processing and rework. Built for workshops and drilling machines This Twist Drill is intended for use with standard drilling machines and is specified to DIN 340, which defines the longer execution for deep drilling tasks. The bright finished surface improves chip flow and offers basic corrosion protection during storage and operation. Its characteristics make it suitable for professional machinists and maintenance workshops that require a reliable, stable standard drill for a broad range of metalworking applications. Recommendations for use and tool care To maximise tool life and performance, use coolant when machining harder alloys and observe recommended cutting speeds for HSS‑G material. Because fully ground HSS bits can be more brittle than rolled variants, avoid shock loading and prefer stationary machines or well‑supported power drills. Regular sharpening restores cutting geometry; ground bits are straightforward to regrind to maintain the original precision and cutting behaviour. For deep, precise metal drilling choose the MetavCUT Twist Drill long HSS‑G 8 mm — METAV Werkzeuge offers expert technical advice and personalised support at info@metav-werkzeuge.com or by phone at +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 53080-FDA Diameter: 8 mm Gesamtlänge: 165 mm Spirallänge: 109 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: long Schaft Ausführung: fully ground Für Bohrmaschine: Drilling Machine Farbe: bright finished Norm: DIN 340 Modellserie: Standard Line Anwendungen: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill is mainly used for drilling in metal; it is especially suited for machining high‑strength materials and larger diameters where deeper or recessed bores are required. Its ground geometry allows precise holes and reliable centring even in demanding workpieces. Which three drill types are there? The main categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for that application. Why are twist drills sharpened at the tip? The tip sharpening reduces the chisel edge at the drill point, which significantly lowers friction and required feed force. As a result the MetavCUT Twist Drill centres better in the workpiece and cuts with less resistance. Can a metal twist drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal bits are easier to resharpen and typically exhibit less self‑feeding action than wood‑specific designs. At what drilling depths is the twist drill most commonly used? A twist drill is the standard tool for through‑hole drilling in solid material. For diameters up to around 20 mm and depths up to approximately 100 mm, the twist drill is the most frequently used tool; the long version of the MetavCUT Twist Drill extends this capability for deeper holes.
8mm Rollgewalzter HSS Spiralbohrer, 118° Spitzenwinkel, Morsekegel, Schwarz - MetavCUT
Der Spiralbohrer von MetavCUT kombiniert rollgewalzte Fertigung, HSS-Material und Morsekegel-Schaft zu einem robusten Werkzeug für Standard-Metallbohrungen; profitieren Sie von hoher Zähigkeit, guter Standzeit und sicherer Spannübertragung direkt über Metav Werkzeuge oder lassen Sie sich von unserer Beratung unterstützen. Spiralbohrer von MetavCUT Standard Line (Morsekegel) Der Spiralbohrer ist ein rollgewalztes HSS-Spiralwerkzeug für robuste Metallbohrungen mit Morsekegel-Schaft, geeignet für allgemeine Werkstatt- und Maschinenanwendungen. HSS-Spiralbohrer, rollgewalzte Bauart Morsekegel-Schaft für hohe Drehmomentübertragung Ø 8 mm, Spirallänge 87 mm, Gesamtlänge 168 mm Für Stahl bis ca. 900 N/mm² geeignet Spitzenwinkel 118° für leichte Zentrierung Zähigkeit durch Fertigungsverfahren und Material für wirtschaftliche Bohrungen Die Kombination aus HSS und der rollgewalzten Herstellung macht dieses Spiralwerkzeug besonders zäh und bruchsicher. Weil der Rundstab beim Walzen in die Spirale gepresst wird, entsteht eine erhöhte Elastizität, die gerade bei kleineren Durchmessern das Bruchrisiko reduziert. Für Anwender bedeutet das weniger Werkzeugwechsel und geringere Stillstandszeiten bei Serien- und Einzelaufträgen. Geeignete Einsatzfelder und klare Materialgrenzen für sichere Planung Für alle üblichen Metallarbeiten in Werkstatt und Betrieb ist dieses Spiralwerkzeug ausgelegt: legierter und unlegierter Stahl, Gusswerkstoffe sowie Nichteisenmetalle und Kunststoffe. Die Angabe zur Festigkeit von ca. 900 N/mm² dient als Planungsgröße, damit Bohrungen in passenden Werkstoffen zuverlässig und wirtschaftlich ausgeführt werden können. So lassen sich Aufträge schneller kalkulieren und umsetzen. Maschinenanforderungen und Anwendungshinweise für präzise Ergebnisse Bei stationären Maschinen mit Morsekegel-Aufnahme sitzt der Bohrer sehr fest und überträgt hohe Lasten ohne zusätzliches Bohrfutter. Der Morsekegel sorgt für Selbsthemmung und Genauigkeit, vor allem bei höheren Vorschüben. Bei handgeführten Geräten empfiehlt sich vorbohren oder der Einsatz von Zentrierhilfen, um Wanderneigung zu vermeiden und saubere Bohrbilder zu erzielen. Praktische Tipps zur Handhabung und Lebensdauersteigerung Ein Spitzenwinkel von 118° erleichtert das Anstechen in weichere Materialien und verbessert das Zentrieren auf gewölbten Flächen. Für tiefe Bohrungen ist auf ausreichende Spanabfuhr und gegebenenfalls Kühlung zu achten, damit sich die Standzeit verlängert. Durch regelmäßiges Nachschleifen der Schaft- und Schneidengeometrie kann die Nutzungsdauer weiter optimiert werden. Die Empfehlung: MetavCUT Standard Line Spiralbohrer mit Morsekegel wählen für zuverlässige Metallbohrungen; bei Bedarf technische Rückfragen an info@metav-werkzeuge.com oder Telefon +49 2822 7131930 richten Technische Daten Artikelnummer: 54080-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 345 Anwendung: Bohrer für Metall Fakten Durchmesser: 8 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Besonderheiten Material: HSS Ausführung: rollgewalzt Schaftausführung: Morsekegel (MK) – konische Aufnahme, selbsthemmend Farbe: schwarz Verpackungseinheit: 1 Label: Spiralbohrer SKU: 54080-FDA FAQ Welche Materialien lassen sich mit dem Spiralbohrer bearbeiten? Der MetavCUT Standard Line Spiralbohrer eignet sich zum Bohren von legiertem und unlegiertem Stahl, Gusswerkstoffen, Nichteisenmetallen und Kunststoffen; die Angabe bis ca. 900 N/mm² dient als Richtwert für die Planung. Ist der Schaft für Ständerbohrmaschinen geeignet? Ja, der Spiralbohrer verfügt über einen Morsekegel-Schaft, sodass er direkt in passende Morsekegel-Aufnahmen von Ständerbohrmaschine oder Drehmaschine eingesetzt werden kann. Wie beeinflusst die rollgewalzte Fertigung die Leistung? Die rollgewalzte Bauart verleiht dem HSS-Material höhere Zähigkeit und geringeres Bruchrisiko, was besonders bei Standardaufgaben in Werkstatt und Montage wirtschaftliche Vorteile bringt. Welcher Spitzenwinkel ist optimal für unterschiedliche Werkstoffe? Der Spiralbohrer hat einen Spitzenwinkel von 118°, der sich besonders für weichere Materialien und einfache Zentrierung eignet; härtere Werkstoffe können andere Winkel benötigen. Gibt es eine Teilenummer zur Bestellung oder Rückfrage? Für Bestellungen und technische Rückfragen nutzen Sie bitte die Artikelnummer 54080-FDA für den MetavCUT Standard Line Spiralbohrer.
9,5mm Spiralbohrer rollgewalzt, HSS, 118° Spitzenwinkel, Morsekegel, 168mm Gesamtlänge - MetavCUT
Der rollgewalzte Spiralbohrer vereint Zähigkeit und Universaltauglichkeit beim Metallbohren; mit HSS-Material und Morsekegelschaft steht zuverlässige Kraftübertragung im Vordergrund. Nutzen Sie die robuste Fertigung und den 118° Spitzenwinkel für saubere Zentrierung in Stahl bis ca. 900 N/mm². Bestellen Sie direkt bei Metav Werkzeuge oder kontaktieren Sie unsere Beratung für technische Rückfragen. Spiralbohrer von MetavCUT — HSS, 9,5 mm, Morsekegel Der Spiralbohrer ist ein rollgewalzter HSS-Morsekegelbohrer für Metallbohrungen bis ca. 900 N/mm² und eignet sich für Ständerbohrmaschinen und Drehmaschinen mit MK-Aufnahme. Rollgewalzte HSS-Ausführung, erhöhte Zähigkeit Morsekegelschaft für festen Sitz in Ständerbohrmaschinen DIN 345 konform und für gängige Aufnahmen geeignet 9,5 mm Durchmesser mit 118° Spitzwinkel Robuste Fertigung für den täglichen Werkstattbetrieb Die rollgewalzte Herstellungsweise macht diesen Spiralbohrer besonders zäh und weniger bruchanfällig als geschliffene Werkzeuge, was im Alltag die Ausfallzeiten reduziert. Das Material HSS (Schnellarbeitsstahl) kombiniert hohe Festigkeit mit guter Wärmebeständigkeit, sodass der Bohrer bei typischen Schnittgeschwindigkeiten in Stahl, Guss und Nichteisenmetallen zuverlässig arbeitet. Der Einsatz des Morsekegelschafts sorgt für sichere Kraftübertragung und hohe Stabilität bei Bohrarbeiten an Ständerbohrmaschinen. Präzision, Anwendungsspektrum und Materialwahl Der 118° Spitzenwinkel ermöglicht sauberes Zentrieren und eignet sich besonders bei weicheren Werkstoffen wie Aluminium; bei härteren Legierungen bleiben bessere Ergebnisse mit angepasstem Schneidenwinkel erreichbar. Die Spirallänge von 87 mm unterstützt die Spänevakuierung in mitteltiefen Bohrungen und reduziert Verstopfungen. Anwender profitieren von der DIN 345-Konformität, die Kompatibilität und Austauschbarkeit innerhalb der Werkstatt sicherstellt. Bedienkomfort, Einsatzhinweise und Lebensdauer Durch die rollgewalzte Konstruktion ist der Bohrer elastischer und widerstandsfähiger gegenüber Stoßbelastungen, was das Risiko von Bruch bei Durchmessern unter 6 mm verringert. Für saubere Ergebnisse sollte vorbohrt oder schrittweise aufgebohrt werden, wenn tiefe Löcher erforderlich sind. Eine regelmäßige Kühlschmierung verlängert die Lebensdauer, reduziert Wärmebelastung und sorgt für gleichbleibende Bohrqualität. Empfehlung: Greifen Sie auf die Verlässlichkeit der MetavCUT Standard Line zurück und bestellen Sie den Bohrer direkt bei Metav Werkzeuge oder rufen Sie bei technischen Fragen an unter +49 2822 7131930 — professionelle Beratung inklusive. Produktmerkmale Artikelnummer: 54095-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 345 Fakten Durchmesser: 9,5 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Besonderheiten Material: HSS Ausführung: rollgewalzt Schaft: Morsekegel — konisch, selbsthemmend Farbe: schwarz Verpackungseinheit: 1 Geeignet für: Stahl und Stahlguss bis ca. 900 N/mm², Gusseisen, Nichteisenmetalle und Kunststoffe FAQ Für welche Materialien eignet sich der Spiralbohrer von MetavCUT am besten? Der MetavCUT Spiralbohrer (DIN 345, HSS) ist ausgelegt für Stahl und Stahlguss bis ca. 900 N/mm² sowie für Gusseisen, Nichteisenmetalle und Kunststoffe; bei sehr harten Werkstoffen empfiehlt sich angepasste Schnittgeschwindigkeit und Kühlung. Welche Aufnahme ist für diesen Bohrer erforderlich? Der Spiralbohrer verfügt über einen Morsekegelschaft, er passt direkt in Morsekegel-Aufnahmen von Ständerbohrmaschinen und Drehmaschinen und überträgt hohe Drehmomente zuverlässig. Wie beeinflusst die rollgewalzte Ausführung die Anwendung? Die rollgewalzte Fertigung macht den Bohrer zäher und weniger bruchanfällig, was besonders bei Standardbohrungen in der Werkstattpraktisch ist; Präzisionsansprüche an Rundlaufgenauigkeit sind jedoch geringer als bei geschliffenen Bohrern. Welche Rolle spielt der 118° Spitzenwinkel in der Praxis? Der 118° Spitzenwinkel sorgt für gutes Zentrierverhalten und erleichtert das Eindringen in weichere Materialien; bei gewölbten Oberflächen oder speziellen Legierungen kann ein angepasster Winkel vorteilhaft sein.
9.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, Ø 9.1 mm, 118° Point Angle, Black, DIN 338 The Twist Drill Type N short HSS is a compact metalworking drill bit designed for precise drilling in steel and other metals with handheld or drilling machines. Short HSS Twist Drill for precise metal drilling Designed to DIN 338 for short cylindrical shanks 118° point angle for reliable centring and reduced walking Stable short length: 125 mm overall for less deflection Suitable for handheld drilling machines and workshop use Greater Stability and Precision for Metalworking Thanks to its short design and conformance to DIN 338, this Twist Drill offers increased rigidity and reduced tendency to bend compared with longer drills. The shorter protruding length gives better control and enables more accurate hole positioning in metal components. As a result, less rework is needed and tool life is supported by reduced lateral stress. Material Performance and When to Use It Made from HSS (High Speed Steel), the bit is optimised for standard metalworking tasks: it suits alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The 118° point angle makes the tip easier to centre on curved surfaces and softer materials while still delivering clean penetration into metal. For tougher materials, harder geometries may be chosen, but for many workshop and maintenance jobs this Type N bit is an efficient, reliable choice. Compatibility with Tools and Practical Tips With an overall length of 125 mm and a spiral length of 81 mm, the short execution reduces vibration during use and is particularly suitable for handheld drilling machines as well as bench drills. For best results, select appropriate spindle speed and steady feed; the roll-formed HSS construction helps reduce breakage risk on diameters below 6 mm and offers good re-sharpenability when needed. Practical Advantage and Quality Assurance This Type N short Twist Drill from MetavCUT focuses on stability and wide-ranging usability in metalworking. The black finish and standard cylindrical shank are compatible with common chucks, and the adherence to DIN 338 ensures consistent manufacturing tolerance. Whether for repair, workshop production or maintenance, the bit offers a balance of stability and versatility. For reliable metal drilling choose the MetavCUT Twist Drill Type N in Short HSS — METAV Werkzeuge provides expert technical advice and support via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40091-FDA Diameter: 9.1 mm Point Angle: 118° Spiral Length: 81 mm Overall Length: 125 mm Material: HSS (High Speed Steel) Type: Type N Execution: short Standard: DIN 338 Colour: Black Application: Drills for Metal For Drill Machine: Hand Drill / Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the MetavCUT Twist Drill Type N suitable for handheld drilling machines? The MetavCUT Twist Drill Type N in Short HSS is suitable for use with handheld drilling machines and bench drills; its reduced length minimises deflection and improves control when drilling metal with portable equipment. What are Twist Drills used for? Twist Drills are primarily used for machining high-strength materials and larger hole diameters; they are easy to regrind and resist higher loads, making them suitable for continuous metalworking operations. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills.
Why carbide indexable inserts remain the go-to choice
Carbide indexable inserts are the most widely used and versatile cutting inserts in machining. Manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, these inserts form the actual cutting edge on toolholders including milling cutters, turning inserts and drills. Synonyms used here: carbide cutting inserts, indexable carbide inserts.
How they perform under coolant and load
As the cutting element, carbide indexable inserts enable economic and precise machining across a broad spectrum of materials, from soft non‑ferrous metals to high‑strength steels. In tool systems without internal cooling, heat generated at the cutting zone is normally removed by external machine nozzles using coolant, which is adequate for most standard tasks, open contours and easily accessible components. For deep holes, heavy roughing or when working with materials that generate high temperatures such as stainless steel or titanium alloys, the use of internal cooling is essential: coolant is delivered through internal channels in the toolholder directly to the cutting edge under pressure to prevent thermal overload, optimise chip formation and extend insert life.
Key performance gains you can expect
- increased tool life through the high wear resistance and balanced toughness of tungsten carbide inserts
- consistent chip control and surface finish when coolant is delivered precisely via internal channels
- reduced machine downtime thanks to easy indexability and fast insert changes on compatible toolholders
- broad material compatibility, from soft non‑ferrous metals to hardened steels, enabling fewer tool variants in stock
- economic productivity by combining long stand life with repeatable cutting performance
Metav as your precision partner
Metav stands for the democratisation of precision. With decades of expertise and a catalogue that spans from high‑precision measuring instruments to full workshop equipment, Metav acts as a reliable quality filter for the European market from its Emmerich location. Over 48,000 customers trust Metav’s range and service; the breadth of more than 250,000 products helps reduce supplier complexity while ensuring consistent supply and product quality for industry and trade.
In brief: carbide indexable inserts at a glance
Carbide indexable inserts deliver the necessary balance of extreme wear resistance and mechanical toughness for versatile, cost‑efficient machining. Used with appropriate coolant strategy—external coolant for general work and internal cooling for demanding, deep or heat‑intensive operations—they are a cornerstone of modern metalcutting.
FAQ
What are carbide indexable inserts made of?
Carbide indexable inserts are manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, producing a cutting material that combines high wear resistance with the toughness needed to resist mechanical shock.
When is internal cooling necessary for carbide cutting inserts?
Internal cooling becomes necessary for deep hole drilling, heavy roughing and when machining materials that generate significant heat, such as stainless steel or titanium alloys. Internal cooling channels in the toolholder deliver coolant directly to the cutting edge to prevent thermal overload and improve chip breakage.
Can indexable carbide inserts be used without internal cooling?
Yes. For most standard applications, open contours and well‑accessible components, external coolant supplied by machine nozzles is sufficient, as tungsten carbide is more tolerant of moderate temperature fluctuations than some alternative materials.
How do carbide indexable inserts contribute to production efficiency?
By offering long tool life, stable cutting performance and quick indexability on compatible toolholders, indexable carbide inserts help reduce downtime, simplify tool inventories and maintain consistent part quality across varying materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com