Carbide indexable inserts for high‑performance metalworking
Carbide indexable inserts are wear‑resistant cutting elements designed to deliver economical, precise material removal across a wide range of workpieces, offering excellent balance between extreme wear resistance and the toughness required to withstand mechanical shocks. Used on toolholders such as cutters, turning tools and twist drills, they enable efficient machining of materials from soft non‑ferrous alloys to high‑strength steels by optimising cutting forces and thermal stability. For standard accessible contours external coolant is often sufficient, while deep holes, heavy cutting or machining of stainless steel and titanium alloys benefit from internal coolant channels to protect the cutting edge, improve chip control and extend insert life. Key advantages include high durability, consistent surface finish and reduced tool changeover times through the use of replaceable indexable inserts, carbide grades and toolholder systems.
7mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill (Twist Drill) – Ø 7 mm · 135° tip · HSS‑G · DIN 338 · with W‑point and triangular shank · Model: Spezial · Brand: MetavCUT The Twist Drill is a precision metal‑drilling tool for handheld and machine use, designed to deliver fast, centred holes in steels, non‑ferrous metals and engineering plastics. Rapid drilling performance with HSS‑G material 135° tip for cleaner entry in hard materials Triangular shank for secure grip in cordless drills Conforms to DIN 338 for short twist drills Special W‑point grind reduces required feed force Faster, cleaner holes in demanding materials The Twist Drill made from HSS‑G combines high cutting speed with good wear resistance, so drilling progress is noticeably quicker than with conventional HSS drills. The 135° tip angle is optimised for harder workpieces such as stainless steel and other tough alloys, meaning reduced wandering at the start and cleaner hole edges. For users this translates into less rework and more precise bores even under repetitive use. Efficient power transfer and easy handling with handheld tools The design with a triangular shank ensures a positive fit in chucks and quick torque transmission, ideal for use with a Drilling Machine or cordless hand drills. The integrated W‑point (multi‑bevel cutting edge) improves centring and reduces the required axial force, so less effort is needed during operation and the risk of drill deflection is lower. Professionals benefit from faster cycle times and safer handling on the job. Application range and target users This Spezial series Twist Drill is intended primarily for metalworking: alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. It is therefore particularly suitable for workshop technicians, toolmakers and maintenance teams who need a reliable general‑purpose metal drill. The robust geometry also makes it useful for occasional work in aluminium and wood where a durable, resharpenable drill is preferred. Standards, maintenance and technical advantages Manufactured to DIN 338, the short twist drill geometry ensures compatibility with industry expectations for short HSS drills with cylindrical or polygonal shanks. The HSS‑G substrate allows resharpening without significant loss of accuracy, extending tool life when compared to coated disposable types. A correctly reground W‑point preserves centring and chip evacuation, reducing heat build‑up and helping to maintain hole quality over repeated sharpening cycles. We recommend the MetavCUT Spezial Twist Drill for tradespeople and engineers who require fast, precise drilling in metals and engineering plastics; for further technical advice or to confirm suitability for a specific application please contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 55070-FDA Diameter: 7 mm Tip angle: 135° Material: HSS‑G Spiral length: 69 mm Overall length: 109 mm Shaft execution: with W‑point and triangular shank Model series: Spezial Norm: DIN 338 Application: Drills for metal For use with: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Twist Drill) be used on? The MetavCUT Twist Drill is designed for metalworking and performs well in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals, aluminium and hard plastics; its geometry and HSS‑G material also allow occasional use in wood where a resharpenable metal drill is acceptable. What are the three main drill types? The three main drill types are metal drills, wood drills and stone/concrete drills, each optimised in geometry and material for the specific substrate and cutting conditions.
7mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — 7 mm, 135° tip, long, bright finished, HSS‑G, DIN 340 The Twist Drill long HSS‑G 7 mm is built for deep metal drilling with a 135° tip, suited to hard materials and less accessible bore locations on a Drilling Machine. Long Twist Drill for deep, hard-to-reach holes HSS-G ground for faster drilling and precise holes 135° tip suited for hard materials like stainless steel Fully ground shank ensures high runout accuracy DIN 340 standard for long drill execution Faster deep drilling with reduced effort for workshop use Long execution according to DIN 340 offers clear practical benefits: the increased Spiral Length and overall length enable drilling into deeper workpieces or into recesses where standard bits fall short. Because the flute geometry is ground, the bit cuts with very sharp edges, which can result in up to 40% faster drilling and requires substantially lower feed pressure compared with conventional HSS bits. The practical effect is less operator fatigue, more consistent bore quality and a faster cycle time for repetitive metalworking tasks. Precise holes in hard materials thanks to HSS‑G and 135° tip A HSS‑G (ground high‑speed steel) blank combined with a 135° tip improves centring and reduces walking on harder substrates such as stainless steel. The ground geometry gives high Runout Accuracy and clean chip evacuation, producing more concentric and burr‑reduced holes. Users benefit from better repeatability and less post‑processing. Note that ground HSS bits can be more brittle than rolled types, so controlled feeds and appropriate coolant are advised to avoid chipping. Built for metalworking: materials and machine compatibility This long variant is intended primarily for metallic materials: alloyed and unalloyed steel, cast steels, grey and spheroidal cast iron, sintered iron, non‑ferrous metals and hard plastics. It is compatible with handheld Drilling Machines and bench drills when greater reach is needed. For drilling in steels up to the typical range of 900 N/mm² the geometry and tip angle help maintain performance while minimising chatter and deflection, delivering holes that meet machining tolerances in assembly and maintenance operations. Practical handling advice to extend service life and hole quality Because the flutes and cutting geometry are produced by grinding, re‑sharpening is straightforward and preserves cutting performance. For best results, use moderate cutting speeds, steady feed and regular cooling or lubrication to manage heat and chip formation. When drilling deep bores, peck drilling or intermittent withdrawal will improve chip evacuation and reduce risk of breakage. Store bits to avoid impact and inspect for wear before reuse to ensure continued precision. Strong recommendation: For demanding deep‑hole metal drilling choose the MetavCUT long HSS‑G Twist Drill for reliable performance; METAV Werkzeuge offers comprehensive technical advice and support — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 53070-FDA Durchmesser: 7 mm Spitzenwinkel: 135° Ausführung: long Gesamtlänge: 156 mm Spirallänge: 102 mm Farbe: bright finished Schaft Ausführung: fully ground Material: HSS-G Norm: DIN 340 Für Bohrmaschine: Drilling Machine Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is this Twist Drill suitable for? The MetavCUT Twist Drill long 7 mm is suitable for metalworking tasks where deeper or less accessible holes are required; the HSS‑G ground geometry and 135° tip make it especially effective for alloyed and unalloyed steels, cast materials and hard plastics. Which three drill types exist? There are three common drill categories: metal drill bits, wood drill bits and stone/concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill bit family and is optimised for that application. What is a Twist Drill used for? A Twist Drill is principally used for machining high‑strength materials and larger bore diameters; its shape is easy to re‑grind and it endures higher loads while keeping a sharp cutting edge.
8,5mm Spiralbohrer, 118° Spitzenwinkel, HSS, rollgewalzt, Morsekegelschaft, 168mm Gesamtlänge - MetavCUT
Der rollgewalzte HSS-Spiralbohrer überzeugt durch Zähigkeit, Spitzenwinkel 118° und den sicheren Morsekegel-Schaft. Nutzen Sie die Kombination aus Bruchfestigkeit, maschineller Aufnahme und genormter Ausführung für zuverlässige Metallbohrungen. Bestellen Sie den Bohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer HSS mit Morsekegel von MetavCUT Der Spiralbohrer von MetavCUT eignet sich für präzise Metallbohrungen in Ständerbohrmaschinen und wirkt besonders bruchsicher durch rollgewalzte Fertigung Spiralbohrer von MetavCUT für Metallbohrungen Rollgewalzte HSS-Ausführung, bruchzäh und elastisch Morsekegel-Schaft für feste Kraftübertragung DIN 345 Norm, geeignet für Ständerbohrmaschinen Spitzenwinkel 118° für effizientes Eindringen Hohe Zähigkeit und Materialvorteile für robuste Bohrarbeiten Dank der rollgewalzten Fertigung ist der HSS-Bohrer besonders zäh und weniger bruchanfällig als geschliffene Varianten unter rauen Einsatzbedingungen. Diese Herstellung macht den Bohrer elastischer, was beim Bohren von kleinen Durchmessern das Bruchrisiko verringert. Der Einsatz von HSS bietet eine gute Kombination aus Härte und Zähigkeit für legierte und unlegierte Stähle sowie Nichteisenmetalle. Präzise Kraftübertragung durch Morsekegel-Schaft Der konische Morsekegel-Schaft sorgt für feste Selbsthemmung in der Aufnahme und ermöglicht eine sichere Übertragung hoher Drehmomente an der Ständerbohrmaschine. Dadurch reduziert sich das Risiko von Verrutschen und erhöht die Standzeit des Werkzeugs. Für Anwender mit stationärer Maschine bedeutet das weniger Nacharbeiten und konstantere Bohrergebnisse. Anwendungsempfehlung und Einsatzbereiche Dieser Spiralbohrer eignet sich für allgemeine Metallarbeiten in Werkstatt und Industrie, insbesondere für Stahl, Guss und Kunststoffe bis zu etwa 900 N/mm² Festigkeit. Mit einem Spitzenwinkel von 118° dringt der Bohrer leicht in weichere Materialien ein und bietet zuverlässige Zentrierung auf gewölbten Flächen. Für beste Ergebnisse bei höheren Durchmessern empfiehlt sich abgestuftes Vorbohren. Auswahlkriterien und Tipps für den Einsatz Wer Wert auf Alltagstauglichkeit legt, profitiert von der DIN 345-Norm und der Standard Line Ausführung von MetavCUT. Für sauberes Spanbild und längere Standzeit empfiehlt sich passende Kühlung bei zähen Materialien und ein Voranpunktieren bei hoher Präzision. Die Gesamtlänge und Spirallänge sind so gewählt, dass die Handhabung in stationären Maschinen komfortabel bleibt. Empfehlung: Für verlässliche Metallbohrungen empfiehlt MetavCUT den HSS-Spiralbohrer mit Morsekegel; Bestellanfragen über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 sind willkommen Produktmerkmale Artikelnummer: 54085-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Fakten Durchmesser: 8,5 mm Gesamtlänge: 168 mm Spirallänge: 87 mm Spitzenwinkel: 118° Besonderheiten Ausführung: rollgewalzt — zäher, bruchsicherer Fertigungsprozess Material: HSS Schaft: Morsekegel — konischer Schaft mit Selbsthemmung, hohe Kraftübertragung Norm: DIN 345 Farbe: schwarz Anwendung: Bohrer für Metall Verpackungseinheit: 1 FAQ Für welche Materialien eignet sich der Bohrer am besten? Der Spiralbohrer von MetavCUT (SKU 54085-FDA) ist für legierte und unlegierte Stähle, Guss sowie Nichteisenmetalle und Kunststoffe geeignet und deckt typische Werkstattanforderungen zuverlässig ab. Welche Maschine ist für diesen Bohrer empfohlen? Empfohlen wird eine Ständerbohrmaschine mit Morsekegel-Aufnahme, da der konische Morsekegel-Schaft des MetavCUT-Bohrers eine feste, präzise Aufnahme und hohe Kraftübertragung ermöglicht. Ist der Bohrer geschliffen oder gewalzt? Die Ausführung ist rollgewalzt, was den Bohrer zäher und bruchsicherer macht und ihn besonders für normale Metallbohrarbeiten in Werkstatt und Montage prädestiniert. Wie tief kann mit dem Bohrer sicher gebohrt werden? Die effektive Nutzlänge wird durch die Spirallänge von 87 mm begrenzt; für besonders tiefe Löcher ist abgestuftes Aufbohren oder ein längerer Spezialbohrer empfehlenswert. Welche Rolle spielt der Spitzenwinkel 118°? Der Spitzenwinkel 118° erleichtert das Eindringen in weichere Materialien und verbessert die Zentrierung bei gewölbten Oberflächen, wodurch die Handhabung in vielen Alltagsanwendungen vereinfacht wird.
8.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
MetavCUT Twist Drill (Type N) — 8.1 mm · 118° tip · HSS · Short · Black · DIN 338 A MetavCUT Twist Drill (Type N) for precision metal drilling, designed as a short HSS drill for use with hand drilling machines. Short HSS construction for increased stability Precision 8.1 mm diameter for consistent hole quality 118° tip angle for reliable centring in metals Conforms to DIN 338 for standardised short twist drills Suitable for hand drilling machines and workshop use Stable, accurate holes for metalworking tasks The HSS material of this short twist drill offers a reliable balance of hardness and toughness for metalworking. Thanks to its short design, the tool exhibits reduced deflection and higher stability during drilling, which translates into more precise holes and less wear on the drill shank. This characteristic is particularly important when working with tougher materials or when drilling by hand, since a more rigid tool reduces the risk of wobble and off-centre bores. Cutting geometry optimised for clean starts and centring Equipped with a 118° tip and the classic Type N spiral, this twist drill provides predictable entry behaviour and good centring on a variety of metals. A 118° point angle reduces the initial cutting force and supports easier alignment on slightly curved or irregular surfaces. The combination of point geometry and the normal spiral pitch means the drill removes chips reliably while maintaining a controlled cutting action—an advantage for both manual drilling and machine use. Designed for workshop versatility and user convenience With a spiral length of 75 mm and an overall length of 117 mm, the short execution ensures compact handling and improved rigidity in confined setups. The MetavCUT Twist Drill is finished in black and manufactured to DIN 338 standards, making it a suitable choice for drilling alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. The roll-walzen HSS production process yields an elastic drill that is easier to resharpen and reduces brittle fracture risk for smaller diameters. Choose the MetavCUT Twist Drill for workshop-grade metal drilling — METAV Werkzeuge offers expert technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) to help select the right tool for the task Technical data Bezeichnung: Twist Drill Marke: MetavCUT SKU: 40081-FDA Durchmesser: 8.1 mm Spitzenwinkel: 118° Spirallänge: 75 mm Gesamtlänge: 117 mm Farbe: black Ausführung: short Typ: Type N Material: HSS Norm: DIN 338 Anwendung: Drills for metal Für Bohrmaschine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill (Type N) be used on? The MetavCUT Twist Drill Type N is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and many plastics; its HSS composition makes it versatile for a broad range of metal drilling tasks. Is the MetavCUT Twist Drill suitable for use with a hand drilling machine? Yes, the MetavCUT Twist Drill in short execution is designed for compatibility with hand drilling machines and offers improved rigidity and control during manual operation. For what is a Twist Drill used? A Twist Drill such as the MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger hole diameters. Its form allows for straightforward resharpening and it withstands greater loads. Which three drill types exist? The main categories are metal drills (like the MetavCUT Twist Drill), wood drills and stone/concrete drills. Why are Twist Drills sharpened at the point? The point sharpening reduces the cross‑cut at the tip of the twist drill; sharpening lowers friction forces and therefore requires less feed force while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but it typically offers poorer guidance and a less clean finish compared with dedicated wood drills; however it is easier to resharpen and shows less self‑feeding tendency. At which drilling depths is the Twist Drill most commonly used? The Twist Drill is the most used tool for solid drilling. For diameters up to 20 mm and drilling depths up to 100 mm it is commonly employed for through‑holes and general metalwork. What is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not always correct. When choosing between the two, assess whether working conditions justify a higher investment in HSSE for your specific applications.
8.1mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Als Fazit bietet dieser kurze Spiralbohrer eine Kombination aus HSS-E-Material, geschliffener Schaftgeometrie und einem 135° Spitzenwinkel für stabile, präzise Ergebnisse beim Bohren von Metall. Profitieren Sie von hoher Rundlaufgenauigkeit und reduziertem Bruchrisiko bei kleinen bis mittleren Bohrdurchmessern und bestellen Sie direkt über METAV Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 8,1 mm – kurz, HSS-E (MetavCUT) Der Spiralbohrer 8,1 mm ist ein kurzer HSS-E Metallbohrer für präzise Bohrungen in legierten und unlegierten Stählen sowie Gusseisen und Nichteisenmetallen. Kurz-Ausführung für höhere Stabilität Material HSS-E mit 5% Kobaltlegierung Geschliffener Zylinderschaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe DIN 338: kurze Spiralbohrer mit Zylinderschaft Kompakte Bauweise sorgt für bessere Präzision und weniger Vibrationen Die Kurz-Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren. Für Anwender bedeutet das weniger Ausschlag, sauberere Bohrlöcher und eine geringere Belastung des Bohrfutters. Besonders bei Arbeiten in Stahl oder Guss zeigt sich der Vorteil: die reduzierte Neigung zum Verbiegen führt zu gleichmäßigen Bohrbildern und reduziert Nacharbeiten. HSS-E und geschliffene Geometrie für saubere Schnitte und Langlebigkeit Das Material HSS-E mit 5% Kobalt bietet erhöhte Warmfestigkeit und Verschleißbeständigkeit, wodurch der Bohrer auch bei höheren Schnittgeschwindigkeiten standhält. Die geschliffene Ausführung sorgt für sehr scharfe Schneiden und exakten Rundlauf; das Ergebnis sind präzise, gratarme Bohrungen. Bei stationärer Nutzung empfiehlt sich Kühlen, da geschliffene Bohrer bei falscher Handhabung spröder reagieren können. Passende Anwendungen und empfohlene Einsatzbereiche Der Bohrer eignet sich für den typischen Werkstattalltag: Handwerk, Montage und industrielle Werkstätten profitieren von zuverlässigen Ergebnissen beim Bohren in Metall. Im Bereich 2,0 mm bis 13,0 mm ist diese Ausführung universell einsetzbar, sowohl in Handbohrmaschinen als auch in stationären Säulenbohrern. Für besonders präzise Passungen empfiehlt es sich, vorzuapern oder mit Zentrierbohrer anzupunkten. Sichere Anwendungstipps für lange Lebensdauer Für saubere Bohrbilder und geringes Werkstückwandlern sollten Drehzahl und Vorschub auf Material und Durchmesser abgestimmt werden; bei harten Werkstoffen ist der 135° Spitzenwinkel vorteilhaft. Vermeiden Sie tiefe Lochungen ohne Späneschnitt oder Kühlung, und nutzen Sie bei Bedarf mehrstufiges Aufbohren bei größeren Bohrungen. Die Packungseinheit erlaubt einfachen Austausch beim Verschleiß. Empfehlung: Für präzise Metallbohrungen die Kurz-Ausführung von MetavCUT wählen und bei Fragen unsere technische Beratung per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 kontaktieren Produktmerkmale Artikelnummer: 47081-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten: Durchmesser: 8,1 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Material: HSS-E (Hochleistungs-Schnellarbeitsstahl, kobaltlegiert) Schaftausführung: geschliffen (CNC-Schliff für hohe Rundlaufgenauigkeit) Norm: DIN 338 (kurze Spiralbohrer mit Zylinderschaft) Typ: Typ N (Normalspirale, geeignet für Metall) Farbe: 5% kobaltlegiert FAQ Für welche Werkstoffe ist dieser Bohrer am besten geeignet? Der MetavCUT Spiralbohrer 8,1 mm aus HSS-E mit 5% Kobalt ist ideal für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; die Kombination aus Material und 135° Spitzenwinkel erlaubt sicheres Anbohren harter Werkstoffe. Eignet sich die kurze Ausführung für Handbohrmaschinen? Ja. Die Kurz-Ausführung des Spiralbohrers ist aufgrund der reduzierten Auskraglänge besonders stabil und eignet sich für den Einsatz in Handbohrmaschinen sowie in stationären Säulenbohrern. Wodurch unterscheidet sich die geschliffene Schaftausführung? Geschliffene Bohrer bieten sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, wie beim MetavCUT Spiralbohrer mit geschliffenem Zylinderschaft; das sorgt für präzise Bohrlöcher, erfordert aber angepasste Kühlung und vorsichtigen Vorschub. Brauche ich einen Zentrierbohrer vor dem Bohren mit diesem Durchmesser? Für höchste Maßhaltigkeit empfiehlt sich das Anpunkten mit einem Zentrierbohrer; für Standardanwendungen im Bereich 2,0–13,0 mm kann der Bohrer direkt verwendet werden, je nach Maschine und Materialbeschaffenheit. Was bedeutet die Norm DIN 338 für diesen Bohrer? DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft; beim vorliegenden MetavCUT Spiralbohrer garantiert die Norm die Ausführung als kurzer Spiralbohrer, geeignet für den stationären und mobilen Einsatz in metallbearbeitenden Anwendungen.
8.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, Ø 8.1 mm, 135° point angle, Bright finished, Short execution, DIN 338, HSS‑G (MetavCUT) A Twist Drill (Type N) designed for precise metal drilling on drilling machines and stationary machine tools. Short design for higher stability and precision HSS‑G fully ground for sharp, clean holes 135° point angle suited for hard materials like stainless steel Conforms to DIN 338 for short twist drills Short overall length reduces vibration and deflection Greater Stability and Faster Drilling for Metalwork The short design of this Twist Drill delivers increased Stability and reduced deflection when working with hard materials. Shorter overhang from the Chuck improves concentricity and lowers the risk of bending, which directly raises hole accuracy. In many industrial applications the HSS‑G ground geometry achieves up to 40% faster drilling and requires 50% less feed force compared with conventional HSS drills, so productivity improves while Operator fatigue decreases. Precise Tip Geometry for Tough Materials A 135° point angle optimises entry into hard and abrasion‑resistant metals by reducing the initial bite and spreading heat. For less experienced users: the point angle is the cone at the Drill Tip that influences how quickly the tool penetrates and how well it centres. With Type N normal spiral geometry this tool balances cutting speed and chip evacuation, making it particularly effective for Stainless Steel, Cast Iron and Alloyed Steels. Engineered Finish and Compliance for Reliable Results The fully ground flute and land geometry (HSS‑G) produce very sharp cutting edges and excellent Runout accuracy, yielding cleaner holes and longer life under correct conditions. The product conforms to DIN 338, which classifies short Twist Drills with cylindrical shanks and specifies manufacturing tolerances and execution variants. This standardisation supports reproducible setup and interchangeability in workshop environments. Recommended Use and Machine Compatibility Designed primarily for machining metal, this Twist Drill suits both stationary machine tools and drilling machines; it is most effective when used with appropriate cutting speeds, coolant and steady clamping. For hand‑held Drilling Machines take care with feed and torque limits because fully ground HSS drills can be more brittle than rolled variants; cooling and moderate speeds extend tool life. Typical applications include holes in unalloyed and alloyed steels, castings, sintered parts and hard plastics. Material Care and Maintenance Tips The HSS‑G material benefits from correct machining parameters: use steady coolant/lubrication for deep or high‑speed holes, and avoid excessive pecking without coolant to prevent heat build‑up. The fully ground geometry makes re‑sharpening straightforward for experienced toolmakers, while maintaining concentricity is essential to prevent premature breakage. For best performance, inspect the Twist Drill for wear and micro‑chipping before each critical operation. Strong recommendation: Choose the MetavCUT Twist Drill (Type N, HSS‑G) for demanding metal drilling tasks and contact METAV Werkzeuge for expert advice and application support — 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 45081-FDA Diameter: 8.1 mm Point angle: 135° Type: Type N Colour: Bright finished Execution: Short Spiral length: 75 mm Total length: 117 mm Shank execution: Fully ground Material: HSS-G Standard: DIN 338 For drilling machine: Drilling Machine Application: Drills for metal Model series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Type N) is primarily used for drilling metal; it excels in producing precise holes in alloyed and unalloyed steels, cast components and hard plastics when used on drilling machines or stationary machine tools. Can the MetavCUT Twist Drill be used in a hand drill? The MetavCUT Twist Drill can be used in a hand drilling machine with caution; due to its short, fully ground HSS design it performs best in well‑supported setups and benefits from controlled feed, cooling and firm clamping to avoid breakage. For what is a Twist Drill used? Twist Drills are mainly applied to machining high‑strength materials and larger diameters; their form is easy to re‑grind and they withstand greater loads, making them suitable for demanding metalwork. Which three drill types exist? There are three main drill types: Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cut at the tip, which lowers friction and the required feed force while improving the drill’s centring in the workpiece. Can you drill wood with a Twist Drill? Metal drills can be used in wood, but they offer poorer guidance and a less clean finish; however, they are easier to resharpen and have lower self‑feed tendencies. At which drilling depths is the Twist Drill most commonly used? Solid drilling is commonly executed with Twist Drills; they are most frequently the tool of choice for diameters up to 20 mm and drilling depths up to 100 mm. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect; choice should be based on the specific working conditions and whether those conditions justify the higher cost of HSSE.
8.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill — Short HSS‑G Twist Drill (Ø 8.1 mm, 135° Tip, Type N, Bright Finished, DIN 338) The MetavCUT Twist Drill is a short Type N Twist Drill designed for precision metalworking, offering a bright finished surface and a 135° tip for improved entry into hard materials. Short HSS-G design for increased stability 8.1 mm diameter for precision metal drilling 135° tip for harder materials like stainless steel Fully ground shank for high concentricity Compliant with DIN 338 for short Twist Drills Stability and faster drilling for demanding metalwork Short design combined with HSS‑G grinding provides tangible advantages in daily workshop use. The reduced overhang reduces vibration and bending so that drilling stays precise even under higher loads. Because the Flute Geometry is CNC‑ground, the drill cuts with sharply defined edges; this results in up to 40% faster drilling and requires about 50% less thrust than comparable conventional HSS tools, which reduces operator fatigue and machine wear. Users benefit from cleaner holes and improved tool life when used with appropriate cooling. Reliable performance in hard and alloyed steels A 135° Tip reduces the tendency to wander on hard surfaces and shortens the initial drilling time for tougher materials such as Stainless Steel and alloyed Steels. As a Type N normal‑spiral Twist Drill, this tool is optimised for Metal applications and provides consistent chip evacuation under typical machining conditions. Compliance with DIN 338 ensures that dimensions and tolerances match workshop expectations for short Twist Drills, making the drill an efficient choice for production and repair tasks where reproducible results matter. Built for precision and concentricity The Fully Ground Shank and accurate manufacturing in the Profi Line series deliver high concentricity at the chuck. This construction minimises runout and produces rounder, more accurate holes when compared to rolled alternatives. For work on stationary or mobile machine tools, the short overall length improves rigidity and gives craftsmen more control during finishing and reaming operations. For those who recondition tools, the ground geometry is also simpler to resharpen while maintaining cutting accuracy. Practical guidance and application areas This Twist Drill has been developed primarily for drilling in a range of metals including alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The short flute length (Spiral Length 75 mm) and total length of 117 mm make it especially suitable for precision work on machine tools and hand drills where stability is essential. If unsure whether this drill meets a specific application, METAV Werkzeuge offers expert consultation to advise on performance, cooling strategy and feed rates. Why choose this short Profi Line Twist Drill Manufacturing choices such as the grinding process (HSS‑G) result in sharper cutting edges and superior running accuracy. That precision translates into fewer rejects, less rework and a measurable increase in productivity in workshop environments. For operators facing frequent drilling in harder materials, the combination of Short Design and 135° Tip delivers a practical balance of durability and cutting performance without sacrificing control. Strong recommendation: Choose the MetavCUT Profi Line Short Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice via email (info@metav-werkzeuge.com), phone (+49 2822 7131930) or WhatsApp (+49 170 2837271) Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 48081-FDA Model Series: Profi Line Type: Typ N Diameter: 8.1 mm Spiral Length: 75 mm Overall Length: 117 mm Tip Angle: 135° Material: HSS-G Execution: short Shank Execution: fully ground Colour: bright finished For Drill Machine: Drilling Machine Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main advantage of a short Twist Drill like the MetavCUT Twist Drill? A short Twist Drill such as the MetavCUT Twist Drill offers greater stability and less tendency to bend, which improves precision when drilling hard materials; the reduced overhang also means cleaner holes and more consistent results on machine tools. Is the MetavCUT Twist Drill suitable for stainless steel and hardened material? Yes, the MetavCUT Twist Drill with its 135° Tip and HSS‑G geometry is particularly suited to harder Materials including Stainless Steel; the tip angle shortens entry time and the ground flutes maintain sharpness for effective cutting. What are Twist Drills used for? Twist Drills are mainly used for machining high‑strength materials and for larger drill diameters. The shape is easy to resharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills pointed? Pointing reduces the chisel edge at the tip of the Twist Drill. Pointing decreases friction forces, which lowers the required feed force and helps the drill to centre more reliably in the workpiece. Can a metal drill be used in wood? A Metal Drill can be used in Wood, but guidance is reduced and the hole finish is usually not as clean. Metal Drills are easier to resharpen and typically have less self‑feeding tendency than dedicated wood drills. For which drilling depths is the Twist Drill most commonly used? A through hole is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE is always superior to HSS is not universally correct. When choosing between HSS and HSSE, evaluate whether your working conditions justify the higher cost of HSSE.
8.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short, 8.25 mm, 118°, HSS, black (DIN 338) by MetavCUT The Twist Drill by MetavCUT is a short Type N metalworking drill bit designed for stable, precise boreholes in metals and suitable for use in drilling machines and hand drills. MetavCUT Twist Drill Type N for metal drilling 8.25 mm Diameter for precision holes 118° Point angle for fast centring Short execution for high stability Made from HSS per DIN 338 standard Precision and durability for metalworking applications The Twist Drill from MetavCUT combines a 8.25 mm diameter with a 118° tip geometry to deliver reliable entry and clean holes in a variety of metals. Manufactured from HSS (High Speed Steel), this short spiral drill offers a balance of hardness and elasticity, which reduces the risk of breakage when drilling smaller diameters and provides lasting edge retention under repeated loads. Compliance with DIN 338 ensures standardized dimensions and performance, so compatibility with typical chucks and machining fixtures is guaranteed. More stability and better control through a short design A short overall length and reduced protruding length increase stability and minimise wobble, which benefits precision work on tougher materials. The compact form reduces vibration and improves concentricity, making the drill ideal when accuracy matters and when working with portable Drilling Machines or bench-mounted equipment. Users benefit from easier handling, safer operation, and less tendency for the bit to deflect under sideways loads. Practical suitability and recommended uses This Type N Twist Drill is optimised for metalworking tasks: it is appropriate for alloyed and unalloyed steel, cast iron, non-ferrous metals and various plastics. The design supports both stationary Drilling Machines and suitable Hand Drills for robust workshop use. Professionals and advanced hobbyists who require dependable, repeatable results in mechanical, fabrication and maintenance contexts will find this short HSS drill a dependable choice. Material and tip geometry explained for confident selection HSS (High Speed Steel) provides elevated hot hardness and toughness compared with regular carbon steels, meaning the bit holds its edge under the heat generated by high RPM machining. The 118° Point angle favours faster centring and is typically chosen for softer to medium-hard materials; it also reduces thrust in the initial penetration. The Type N normal spiral geometry ensures efficient chip removal and general-purpose performance for metal drilling. For particularly hard alloys or specialised tasks, consider whether a different grade or coating would be advantageous. Choose the MetavCUT Twist Drill for reliable, precise metal drilling — for personalised technical advice or to confirm suitability for your exact application, contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 400825-FDA Diameter: 8.25 mm Point Angle: 118° Spiral Length: 75 mm Overall Length: 117 mm Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black For: Drilling Machine (Hand drill) Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and drilling larger diameters in metalwork; its construction allows it to withstand higher loads and to be re-sharpened easily while maintaining performance. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for use in a Hand Drill as well as in stationary Drilling Machines, though the short execution particularly improves stability and results when mounted in robust chucks or machine spindles. What are Twist Drills used for? Twist Drills such as this MetavCUT Type N are mainly applied to the machining of high-strength materials and larger bore diameters; their geometry makes them easy to re-grind and capable of withstanding substantial loads during metal drilling. Which three drill types exist? Common categories include Metal drills, Wood drills, and Stone/Concrete drills, where the MetavCUT Twist Drill belongs to the metal drill group. Why are Twist Drills sharpened (pointed)? The sharpening reduces the minor cutting edge at the tip, significantly lowering friction and therefore the required feed force; this also improves initial centring of the MetavCUT Twist Drill in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill can be used in wood, but the MetavCUT Type N metal drill provides less guidance and a less clean finish than a dedicated wood bit; however, it is easier to re-sharpen and shows less self-feeding tendency.
8.25mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Twist Drill, Diameter 8.25 mm, 135° tip, Type N, Bright finished, Fully ground shank, DIN 338 The Twist Drill short HSS‑G Type N is a compact metal‑drilling tool designed for precise work in hard materials, suitable for use in a Drilling Machine. Short design for higher rigidity and precision HSS‑G material for sharp, clean metal holes 135° tip for improved entry in hard materials Fully ground shank for excellent runout accuracy Compliant with DIN 338 for short twist drills Precision and stability for demanding metalwork The short HSS‑G Twist Drill from MetavCUT combines a reduced overhang with a robust geometry to deliver reliable concentricity and minimal deflection. Its short design reduces the unsupported length outside the chuck, which translates into higher stability and better hole accuracy when machining steels and other hard materials. For workshop and industrial applications where repeatable hole quality matters, this configuration helps maintain machining tolerances and reduces scrap rates. Faster penetration with lower feed force A HSS‑G (ground high speed steel) construction and a 135° tip angle optimise the cutting action for tougher metals, shortening the initial entry phase and lowering required thrust. The ground flute geometry provides sharp cutting edges that support faster drilling — the design enables up to around 40% faster progress and reduces required feed forces compared with conventional HSS variants, making the short drill particularly effective for alloyed and unalloyed steel, cast materials and hardened plastics. Explanation: ground (G) means the flutes are CNC‑ground rather than roll‑formed, yielding sharper edges and improved runout accuracy. Designed for metal, tailored to professional use As a Type N normal spiral, this short twist drill is engineered primarily for metalworking on stationary or portable Drilling Machines. Typical applications include drilling in steel, cast steel, cast iron, sintered iron and non‑ferrous metals. The fully ground shank supports precise clamping and is advantageous in production environments where high concentricity and repeatability are required. For less experienced users: Type N indicates a general‑purpose metal drill with a standard spiral suited to a wide range of ferrous materials. Norm conformity and manufacturing details that matter Compliance with DIN 338 identifies this tool as a short twist drill with a cylindrical shank produced to standardised dimensions and tolerances. The bright finished surface and the fully ground shaft contribute to predictable seating in chucks and collets. Because ground HSS variants can be more brittle than rolled types, cooling and controlled feeds are recommended for stationary operations to maximise tool life. The short length also reduces vibration, improving surface finish and hole roundness in high‑precision tasks. Strong recommendation: MetavCUT short HSS‑G Twist Drill for professional metal drilling — for technical advice or to confirm suitability for a specific application, contact METAV Werkzeuge for competent consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill Marke: MetavCUT SKU: 450825-FDA Typ: Type N Durchmesser: 8.25 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Material: HSS-G Ausführung: short Schaft Ausführung: fully ground Farbe: bright finished Norm: DIN 338 Für Bohrmaschine: Drilling Machine Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the ideal use of the Twist Drill by MetavCUT? The MetavCUT Twist Drill short HSS‑G is primarily used for machining high‑strength materials and larger drill diameters; its ground geometry makes it easy to regrind while withstanding greater loads, which suits heavy‑duty metalworking tasks. Which three drill types exist? When classifying common drills, there are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for that purpose. Why are twist drills point‑sharpened? The point sharpening on a MetavCUT Twist Drill reduces the cross‑edge at the tip, which significantly lowers friction and therefore the required feed force, and it improves centring in the workpiece for more accurate starts. Can a Twist Drill for metal be used to drill wood? A MetavCUT metal Twist Drill can be used in wood, but it offers less guidance and a rougher finish than a purpose‑built wood drill; metal drills are easier to re‑sharpen and have less self‑feeding action. For which drilling depths is the Twist Drill commonly used? A through hole in solid material is typically made with a Twist Drill; for diameters up to around 20 mm and drilling depths up to about 100 mm, the short twist drill form is the most frequently used tool. Which is better, HSS or HSSE? The general belief that HSSE steels are inherently superior to HSS is not universally correct. Evaluate working conditions to determine whether HSSE justifies a higher cost; MetavCUT recommends choosing material and coating based on specific machining demands.
8.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Der Spiralbohrer kurz von MetavCUT verbindet hohe Stabilität durch die kurze Ausführung mit der Schnittfestigkeit von HSS und eignet sich besonders für präzise Metallbohrungen; bei Bedarf technische Beratung über Metav-Qualitätsfilter anfordern. Spiralbohrer kurz von MetavCUT (HSS, DIN 338) Der Spiralbohrer kurz von MetavCUT ist ein HSS-Kurzbohrer nach DIN 338 für präzise Metallbohrungen mit hoher Stabilität. Kurze Ausführung für bessere Stabilität und Präzision HSS-Material reduziert Bruchrisiko bei < 6 mm Bohrungen Typ N Normalspirale für Metallarbeiten Durchmesser 8,2 mm mit 118° Spitzenwinkel Packungseinheit 5 Stück, SKU 40082-FDA Stabilität und Präzision für Metallbearbeitung Die kurze Bauform sorgt für deutlich verminderte Auskragung und damit für höhere Stabilität beim Bohren von Metall. Durch die reduzierte Biegespannung ist die Spanabfuhr effizienter und die Wahrscheinlichkeit eines Bruchs sinkt. Anwender profitieren von gleichmäßigeren Bohrbildern und einer geringeren Nacharbeit, was die Effizienz in Werkstatt und Produktion erhöht. Materialwahl und Spitzenwinkel – warum HSS und 118° Das verwendete HSS (Schnellarbeitsstahl) bietet Elastizität und eine hohe Warmfestigkeit, wodurch sich das Bruchrisiko bei kleineren Durchmessern reduziert. Der gewählte Spitzenwinkel von 118° ist optimiert für allgemeine Metall- und Nichteisenbearbeitung und erleichtert das Anbohren ohne übermäßiges Auslaufen. Diese Kombination reduziert Werkzeugwechsel und steigert die Prozesssicherheit. Einsatzgebiet, Maschine und Anwendernutzen Der Bohrer ist für den Einsatz in Handbohrmaschine und stationären Bohrvorrichtungen vorgesehen und eignet sich besonders für Werkstatt, Montage und Instandsetzung. Anwender erhalten mit diesem Kurzbohrer eine Lösung für Anwendungen in legiertem und unlegiertem Stahl, Gusseisen sowie Kunststoffen, wobei die kurze Ausführung die Bedienbarkeit mit üblichen Bohrmaschinen verbessert. Handhabung, Vorbohren und Lebensdauer Bei größeren Anforderungen empfiehlt sich das Vorbohren zur Entlastung der Querschneide; bei einem Zieldurchmesser von 8,2 mm sorgt korrektes Vorbohren und angepasste Schnittgeschwindigkeit für verlängerte Lebensdauer. Regelmäßige Kühlschmierstoffzufuhr und kontrollierte Vorschubgeschwindigkeit minimieren thermische Belastung und erhalten die Schneidkante. Empfehlung: MetavCUT empfiehlt den HSS-kurzen Spiralbohrer als zuverlässige Lösung für präzise Metallbohrungen; bei Detailfragen oder Bedarf an technischen Daten wenden Sie sich bitte an info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 40082-FDA Marke: MetavCUT Ausführung: kurz Typ: Typ N Norm: DIN 338 Material: HSS Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 5 Fakten Durchmesser: 8,2 mm Spirallänge: 75 mm Gesamtlänge: 117 mm Spitzenwinkel: 118° Besonderheiten DIN 338: kurze Spiralbohrer mit Zylinderschaft HSS: Schnellarbeitsstahl, erhöht Elastizität und Warmfestigkeit Typ N: Normalspirale, klassischer Metallbohrer Kurz: reduzierte Auskragung für mehr Stabilität Farbe: schwarz FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer kurz aus HSS ist für viele Stahlarten geeignet, bei sehr harten Edelstahlqualitäten kann jedoch ein spezieller 135°-Bohrer oder ein Hartmetallwerkzeug sinnvoller sein; SKU 40082-FDA eignet sich insbesondere für allgemeine Stahl- und Gussarbeiten. Kann man den Bohrer in einer Handbohrmaschine verwenden? Ja, der Spiralbohrer kurz ist für Handbohrmaschine ausgelegt und bietet durch die kurze Auskragung höhere Stabilität, wodurch präzise Bohrungen auch mit mobilen Geräten möglich sind. Welche Vorteile hat die kurze Ausführung im Vergleich zu Standardlänge? Die kurze Ausführung reduziert das Verbiegen und verbessert die Rundlaufgenauigkeit, was die Bohrqualität erhöht und die Lebensdauer des Werkzeugs verlängert. Wie groß ist die Packungseinheit und eignet sich die Packung für Werkstattbedarf? Die Verpackungseinheit beträgt 5 Stück, ideal für Werkstattbedarf und Serienarbeiten, SKU 40082-FDA ermöglicht eine schnelle Wiederauffüllung von Verschleißteilen. Was bedeutet Typ N bei diesem Bohrer? Typ N steht für Normalspirale, die klassische Spiralform für Metallbohrungen; kombiniert mit HSS bietet sie eine Balance aus Stabilität und Schnittleistung für allgemeine Anwendungen.
8.2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 8.2 mm, 135° tip, 5% cobalt-alloyed, HSS‑E, DIN 338 (MetavCUT) A Twist Drill Type N short designed for precision metal drilling with Drilling Machines, offering enhanced stability and wear resistance for demanding workshop tasks. Short design for higher stability 5% cobalt-alloyed HSS‑E for heat resistance 8.2 mm diameter with 135° tip for hard metals Fully ground shank for accurate runout Conforms to DIN 338 for standardised quality Stable drilling in hard materials that reduces vibration and breakage The short design of this drill gives a reduced overhang and therefore higher stability during machining. With an 8.2 mm diameter and a spiral length of 75 mm, the geometry minimises bending forces when used in a Hand Drill or on stationary Drilling Machines. For operations in tougher materials the compact length helps to keep the tool steady, which reduces chatter and the risk of sudden breakage while improving hole accuracy and surface finish. Material choice and cutting geometry for longer tool life Made from HSS‑E and alloyed with 5% cobalt, the drill maintains cutting hardness and heat resistance at elevated temperatures. The 135° tip angle is optimised for penetrating hardened and stainless steels, shortening the initial piercing time and improving centring in the workpiece. The combination of material and geometry makes the tool suitable for alloys and cast iron while preserving cutting edges when proper cooling is applied. Precision manufacture: grinding, runout and compliance This item is produced as a fully ground (HSS‑G) short Twist Drill rather than roll‑formed, which results in very sharp cutting lips and high concentricity. The ground flutes and accurately ground shank improve runout and produce clean bore surfaces, especially important when drilling small diameters in metal. Conformity to DIN 338 ensures the dimensions and tolerances meet recognised standards for short cylindrical shank drills. Who benefits most: applications and working tips Engineers, toolroom technicians and advanced hobbyists working with metal will value the performance of this short Type N drill for precise tasks and for drilling up to depths compatible with a 75 mm spiral length. Use moderate speeds, appropriate cutting fluid and a steady feed to exploit the cobalt alloy’s heat resistance. If drilling non‑ferrous materials or wood, expect less guidance than with specialised wood drills; however the tool can still be used with care for multi‑purpose tasks. We recommend the MetavCUT Twist Drill Type N short for precision metalworking; for individual advice on feeds, speeds or tool selection contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 47082-FDA Diameter: 8.2 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Type: Type N Execution: short Shank execution: fully ground Material: HSS‑E Colour / Alloy: 5% cobalt‑alloyed Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of the Twist Drill and where does it perform best? The MetavCUT Twist Drill Type N short is primarily used for machining high‑strength metals and for larger hole diameters in metalworking; its short design improves stability and precision when drilling steels, castings and non‑ferrous alloys. Which three drill types exist and how does this product fit in? There are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill group and is engineered for use in metalworking applications. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross‑edge at the tip of a Twist Drill, which lowers friction and the necessary feed force; this also improves centring so the tip starts the hole more accurately in the workpiece. Can a metal Twist Drill be used to drill wood? A Metal drill can be used in Wood, but the guidance is generally poorer and the hole finish may not be as clean; however metal drills are easier to resharpen and tend to have a lower self‑feeding tendency compared to specialised wood bits. For which hole depths is the Twist Drill most commonly used? A full bore into solid material is typically made with a Twist Drill; for diameters up to about 20 mm and drilling depths to around 100 mm, the Twist Drill is the most commonly used tool. Is HSS or HSSE better? The common belief that HSSE steels are always superior to standard HSS is not universally correct; selection should be based on working conditions and whether the additional cost of HSSE is justified for your specific application.
8.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N short, 8.2 mm, 135°, HSS‑G, Bright Finished, Fully Ground Shank, DIN 338 The Twist Drill Type N short is a precision metal‑drilling tool for Drilling Machines, offering an 8.2 mm diameter and a 135° tip for reliable penetration in hard materials. Twist Drill Type N, 8.2 mm, 135° tip Short design for higher stability and precision HSS‑G ground for fast drilling and clean holes Sized to machine drilling in metals per DIN 338 Bright finished with fully ground shank Short design increases accuracy and reduces vibration A shorter overall length combined with a reduced overhang provides noticeably higher stability during machining, which is particularly advantageous when working on tough alloys. The compact geometry lowers the tendency to bend or chatter, so operators achieve more consistent hole quality under load. For workshop set‑ups where rigidity matters, the short execution of this tool supports precise centring and smoother feeds. HSS‑G ground geometry for faster, cleaner holes in metal The HSS‑G (ground high‑speed steel) construction yields very sharp cutting edges and excellent roundness, enabling up to 40% faster drilling speeds with significantly reduced feed forces compared with conventional HSS. Combined with the 135° tip geometry, the tool is optimised for harder materials and reduces the risk of workpiece deformation while improving tool life when used with appropriate coolant. Fully ground shank and bright finish for reliable clamping A fully ground cylindrical shank ensures uniform clamping in chucks and holders, minimising run‑out and enhancing concentricity for deeper or repeated bores. The bright finished surface facilitates chip evacuation and inspection, while the compliance with DIN 338 confirms the tool class and dimensional tolerances expected in professional metalworking environments. Best suited for professional metalworking and demanding tasks Engineers and machinists who require robust performance in steel, castings and non‑ferrous metals will appreciate the balance of durability and precision offered by this Type N Twist Drill. The tool is designed primarily for machine drilling operations and excels where repeatable accuracy and clean bore edges are required, for example in toolrooms, maintenance shops and production lines. Choose the MetavCUT Twist Drill Type N short with HSS‑G grind for demanding metal applications — for expert advice and application support contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 45082-FDA Diameter: 8.2 mm Tip angle: 135° Type: Type N Material: HSS-G Execution: short Spiral length: 75 mm Total length: 117 mm Shank finish: fully ground Colour / Finish: bright finished Application: Drills for metal Model series: Standard Line Standard: DIN 338 Shaft execution: geschliffen Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What applications is the Twist Drill Type N suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking operations; it is particularly effective when machining steels, cast irons and other harder materials on Drilling Machines, offering stable performance for precision bores. Can the Twist Drill be used in portable drills? While the Twist Drill Type N is designed for machine drilling, it can be used in Handheld Drilling Machines for lighter tasks; however the short geometry shows its full advantages in rigid, machine‑mounted setups to maintain concentricity and hole quality. For what is Twist Drill used? The Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. Which 3 drill types exist? There are three principal drill types: Metal drills, Wood drills, and Stone/Concrete drills. Why are Twist Drills pointed (regrinded)? Pointing reduces the web thickness at the tip of the Twist Drill. By pointing, frictional forces are substantially lowered so that smaller feed forces are required and the tip centres better in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood but typically gives poorer guidance and a less clean result. However, such drills are easier to resharpen and exhibit less aggressive self‑feeding.
8.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill – Short HSS‑G, Ø 8.2 mm, 135° (Type N), Bright Finished The Twist Drill is a short Type N HSS‑G drill designed for precision metalworking with Drilling Machines such as hand and stationary units, ideal where stability and clean holes are required. Short design for higher stability and precision HSS‑G fully ground for sharp, accurate holes 135° tip for hard materials like stainless steel Suitable for Drilling Machines and stationary use Conforms to DIN 338 for short twist drills High performance for demanding metal drilling Short HSS‑G geometry delivers a direct performance advantage: the short design reduces overhang and therefore deflection, improving hole accuracy under load. The fully ground cutting geometry enables up to 40% faster drilling and requires around 50% less feed force compared with conventional HSS cutters, which is especially beneficial when working with alloyed and unalloyed Steel, Cast Iron, Sintered Iron or Hard Plastics. The 135° tip reduces walking on hard surfaces and shortens plunge time, so production cycles become more efficient while maintaining repeatable results. Precision manufacturing and what “fully ground” means for you A fully ground or HSS‑G tool is produced by CNC grinding rather than roll forming. This process yields very sharp cutting edges and high concentricity, leading to clean, precise bores and excellent roundness. Such advantages suit precision drillwork but also call for appropriate handling: ground drills can be more brittle than rolled types, so cooling and controlled feed are advised to prevent breakage and extend tool life. Compliance with DIN 338 ensures the drill matches the expected dimensions and tolerances for short twist drills with cylidrical shanks. Who benefits and where to use it Workshops, metal fabricators and maintenance engineers profit most from this short drill: it is tailored for operations requiring accurate holes in hard materials and where machine stability is limited. With a spiral length of 75 mm and an overall length of 117 mm combined with a Ø 8.2 mm core, the tool is particularly suited to drilling in confined setups or on compact Drilling Machines, where reduced overhang improves process reliability. The Type N normal spiral is the classic choice for metal applications, giving robust chip evacuation and general-purpose versatility. Practical handling tips for longer tool life To get the best from this Profi Line HSS‑G twist drill, use moderate cutting speeds for stainless and hard steels and ensure adequate coolant or lubrication during operation. Short drills tolerate higher feeds thanks to reduced bending moments, but avoid heavy side loads. If re‑sharpening is required, maintain the original 135° tip geometry to preserve centring behaviour and reduce thrust. Regular inspection for wear at the margin and lip relief keeps hole quality consistent and reduces scrap. Strong recommendation: Choose MetavCUT Profi Line short HSS‑G Twist Drills for precision metalworking and contact METAV Werkzeuge for tailored technical advice and application support — Email: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 48082-FDA Type: Type N Diameter: 8.2 mm Point angle: 135° Material: HSS‑G Execution: Short Finish/Colour: Bright finished Shank finish: Fully ground Spiral length: 75 mm Overall length: 117 mm For Drilling Machine: Drilling Machine (Hand Drilling Machine) Norm: DIN 338 Model series: Profi Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The Twist Drill from MetavCUT (Type N) is mainly applied for machining high‑strength materials and larger drill diameters; its geometry and grinding make it suitable for demanding metalwork where clean, precise holes are required and where the tool must withstand higher loads. Which 3 drill types exist? Common basic categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill (Type N) belongs to the metal drill family and is optimized for metal applications. Why are twist drills pointed? The point grind on a MetavCUT Type N Twist Drill reduces the cross‑cut at the tip, which lowers friction so that less thrust is needed; additionally, a correctly ground tip improves centring and reduces walking on the workpiece. Can the Twist Drill be used for wood? A metal drill such as the MetavCUT Type N Twist Drill can be used in wood, but guidance and finish are usually inferior to dedicated wood drills; metal drills are easier to re‑sharpen and have lower self‑feeding tendency, yet they may not give as clean a hole as a wood‑specific bit.
8.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 8.3 mm, 118° tip, HSS, short, black, DIN 338 (MetavCUT) The Twist Drill (Type N) is a short HSS drill bit designed for precision metal drilling with Drilling Machines and workshop hand drills. Short HSS construction for greater stability Conforms to DIN 338 for consistent quality 8.3 mm diameter for standard metal drilling 118° tip for improved centring and faster entry Suitable for Drilling Machine and heavy-duty tasks Reliable stability and precision for metalworking The short HSS design and the reduced overhang provide noticeably higher stability when drilling into metal, reducing bending and chatter. As a Type N normal-spiral bit, this tool excels at creating clean, concentric holes in both unalloyed and alloyed steels; the shorter geometry also improves tool life under repeated loading. For workshop environments where repeatable accuracy matters, the compact length and robust construction translate directly into fewer rejected parts and less rework. Material advantages and tip geometry explained Manufactured from High Speed Steel (HSS) and adhering to DIN 338, the drill combines toughness and heat resistance for typical metalworking tasks. The 118° tip offers a balanced entry characteristic that aids centring on curved or slightly uneven surfaces while keeping cutting forces moderate. In practical terms, this means lower risk of walking at the start of a hole and smoother engagement when used with appropriate cutting speeds and lubrication. The short execution also simplifies regrinding and maintenance. Intended use and suitability for professionals Engineered for the demands of metal drilling, the bit is particularly suitable for production and maintenance tasks in workshops and industrial settings. With an effective spiral length of 75 mm and a total length of 117 mm, the geometry is optimised for machining tasks where rigidity is essential. Users such as fabricators, toolroom technicians and mechanical maintenance teams will value the combination of DIN 338 conformity and the roll-formed HSS production method that balances resilience and resharpenability. Choose the MetavCUT Twist Drill Type N for dependable metal drilling performance — for further technical guidance or to confirm suitability for a specific application contact METAV Werkzeuge: eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40083-FDA Diameter: 8.3 mm Spiral length: 75 mm Total length: 117 mm Tip angle: 118° Execution: short Type: Type N Material: HSS Standard: DIN 338 Colour: black Suitable for: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is used primarily for drilling metal; it is designed to handle alloyed and unalloyed steels, cast iron, non-ferrous metals and certain plastics when appropriate speeds and coolant are applied. Why are Twist Drills sharpened and what benefit does that bring? The tip sharpening reduces the cross-cutting edge at the point of the Twist Drill, which significantly lowers friction and therefore the required feed force; a properly sharpened tip also improves centring and prolongs effective life during production runs. For what is a Twist Drill mainly applied? A Twist Drill is mainly applied to the machining of high-strength materials and large bore diameters; its form allows relatively easy resharpening and it withstands higher loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? Commonly distinguished drill types include metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill falls into the metal drills category. Can a Twist Drill be used to drill wood? The metal Twist Drill can be used in wood, but guidance and finish are typically inferior to dedicated wood bits; metal bits may have worse guidance and a less clean hole, although they are easier to resharpen and have lower self-feeding tendency. At which drilling depths is the Twist Drill most commonly used? A through-hole (solid material) is commonly made with a Twist Drill; for diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool.
8.3mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 8.3 mm, 135° tip, short, 5% cobalt-alloyed, HSS‑E, DIN 338, fully ground The Twist Drill Type N is a short HSS‑E metalworking drill designed for precision drilling in hard materials with Drilling Machines. Short design for increased rigidity and precision Fully ground flutes for sharp edges and clean holes 8.3 mm Diameter with 135° tip for hard metals Conforms to DIN 338 for short cylinder‑shank drills 5% cobalt‑alloyed for enhanced heat resistance High‑precision drilling thanks to a short, rigid design The short execution of this Twist Drill reduces overhang and significantly improves stability during machining, which leads to more precise hole geometry and lower runout. For operations in steel and other hard alloys the reduced cantilever length minimises bending forces and vibration, increasing tool life under comparable conditions. This makes the drill particularly suitable where tight tolerances and concentricity are required. Sharp, ground geometry for clean metal holes A fully ground flute geometry produces very sharp cutting edges and high concentricity. The fully ground manufacturing method delivers precise cutting geometry that results in cleaner hole surfaces and consistent diameters when drilling metals. While rolled drills can be tougher, the ground version provides superior finish and dimensional accuracy, especially in demanding stationary or machine‑guided applications. Material choice and tip geometry tailored for hard materials Manufactured from HSS‑E with a 5% cobalt alloy, the drill combines toughness with elevated hot hardness for higher cutting temperatures. The 135° tip angle reduces initial cutting forces and is optimised for hard steels and stainless materials, shortening dwell during entry. For users unfamiliar with tip angles: a larger tip angle flattens the point and spreads cutting load, which helps when penetrating high‑strength materials. Suitable applications and typical working conditions This Type N Twist Drill is intended primarily as a metal drill for use on Drilling Machines and similar equipment, handling alloyed and unalloyed steels, cast iron, non‑ferrous metals and many plastics. Due to its ground geometry, the tool is best used with appropriate coolant and controlled feed to avoid chipping; it excels in precision workshop and production environments where clean, repeatable holes are required. Who benefits from this drill Metalworkers, toolroom technicians and production engineers who require accurate, repeatable holes in harder materials will value the combination of a short gaging length, HSS‑E material and a 135° tip. The design is aimed at users seeking improved stability and hole quality rather than extreme flexibility for long deep drilling; it is therefore particularly well‑suited to machine‑based drilling tasks. For questions about suitability or for additional technical data, consult MetavCUT products and speak to METAV Werkzeuge for personalised advice via info@metav-werkzeuge.com or by phone Twist Drill Brand: MetavCUT SKU: 47083-FDA Diameter: 8.3 mm Spiral length: 75 mm Overall length: 117 mm Tip angle: 135° Execution: short Shank version: fully ground Material: HSS‑E (5% cobalt‑alloyed) Type: Type N (Normal spiral) Application: Drills for metal / Bohrer für Metall Standard: DIN 338 Suitable for: Drilling Machine / Hand drills when machine guidance is available Manufacturer: MetavCUT Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill (MetavCUT, Type N)? The Twist Drill from MetavCUT, Type N, is primarily used for metalworking tasks and excels when drilling alloyed and unalloyed steels, cast iron and many non‑ferrous metals. Its short design and HSS‑E composition make it especially suitable for precise, machine‑guided holes in harder materials. Which three drill types exist and how does this Twist Drill relate to them? Common drill families are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill (Type N) belongs to the metal‑drill category and is optimised for machining metals rather than timber or stone. For what is a Twist Drill mainly used? A Twist Drill is mainly applied in the machining of high‑strength materials and larger diameters; its geometry is relatively easy to resharpen and it withstands substantial loads. The shape and heat treatment permit reliable use in demanding metal drilling operations. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip of the Twist Drill, lowering friction and therefore required feed force; this also improves centring and reduces walking, enabling easier, more controlled penetration into the workpiece. If you are unsure whether this drill meets your exact requirements or need further technical clarification, METAV Werkzeuge offers expert support and consultation. Contact METAV Werkzeuge for tailored advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
8.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N Drill for Metal, 8.3 mm, 135° Point Angle, Bright Finish, HSS‑G, DIN 338 The Twist Drill (Short, Type N) is a precision drill for metalwork, optimised for stable, high‑performance drilling on drilling machines. Short design for increased stability 135° point angle for hard materials HSS‑G fully ground for sharp cutting edges Fully ground shank for precise chucking Conforms to DIN 338 for standardised quality Faster, cleaner holes thanks to ground HSS technology The short design in combination with HSS‑G (ground high speed steel) reduces cutting resistance and produces very sharp edges, enabling up to 40% faster drilling and requiring around 50% less feed force compared with conventional HSS drills. This results in cleaner hole edges and less heat buildup during interrupted drilling. The ground geometry is produced by CNC grinding, which improves roundness and repeatability, making it ideal where consistent hole quality matters. Greater stability and accuracy when working harder materials A reduced overhang and compact spiral length mean the cutter is less prone to deflection; this short format therefore delivers superior precision when machining steel and similar materials. The 135° point angle is optimised for harder workpieces such as stainless and alloyed steels, while the Type N normal spiral is the classic configuration for metal drilling. The geometry helps centre the tool reliably and reduces walking at the start of the hole. Practical guidance for prolonged tool life and optimal results For best performance use on a suitable drilling machine with correct clamping and, where appropriate, coolant or cutting fluid to control temperature. The fully ground shank ensures accurate holding in the chuck and minimises runout; however, ground HSS can be more brittle than rolled designs, so avoid excessive lateral loads and abrupt shocks. Re‑sharpening is possible but should follow the original geometry to preserve the 135° tip profile and cutting rake. Who benefits: precision metalworkers and maintenance professionals This short drill is aimed at professional machinists, toolroom staff and maintenance technicians who require reproducible holes in a range of metals. Key dimensions provide clear handling and setup advantages: Diameter 8.3 mm, Spiral Length 75 mm, Overall Length 117 mm, bright finish for corrosion resistance and easy identification. The construction and conformity to DIN 338 make it a reliable choice for production and repair environments. For precise metalworking choose MetavCUT's Twist Drill — expert advice and support are available from METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Designation: Twist Drill (Short, Type N) Brand: MetavCUT SKU: 45083-FDA Diameter: 8.3 mm Spiral Length: 75 mm Overall Length: 117 mm Point Angle: 135° Type: Type N Execution: short Material: HSS-G Shank Finish: fully ground Colour / Finish: bright finished Application: Drills for metal Suitable For: drilling machine Model Series: Standard Line Norm / Standard: DIN 338 Manufacturer Contact: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The Twist Drill from MetavCUT is primarily used for machining metal; it is especially suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its short design and ground geometry make it appropriate for precise operations on drilling machines where stability and clean holes are required. Which three drill types are commonly distinguished? In general classification the main drill groups are metal drill, wood drill, and stone/concrete drill. MetavCUT's Twist Drill belongs to the metal drill category and is engineered specifically for metalworking applications.
8.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus HSS-G-Material, kurzer Ausführung und 135° Spitzenwinkel ermöglicht schnelle, präzise Bohrungen in Stahl und Guss. Bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT, Profi Line Spiralbohrer in kurzer Ausführung für präzise Metallbohrungen an stationären Maschinen und Handbohrmaschine. HSS‑G geschliffen für präzise Schnitte Kurze Ausführung reduziert Vibrationen 8,3 mm Durchmesser für Standardanwendungen 135° Spitzenwinkel für harte Werkstoffe Verpackungseinheit 5 Stück Haltbarkeit und Schneidleistung für anspruchsvolle Stahlarbeiten Der geschliffene HSS‑G-Werkstoff sorgt für eine sehr scharfe Schneidkante und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in legierten und unlegierten Stahl fördert. Dank der kurzen Auskraglänge ist die Stabilität erhöht und die Neigung zum Verbiegen reduziert, wodurch weniger Nacharbeit erforderlich wird. Die angegebene Leistungssteigerung von bis zu 40 % schnellerem Bohren und bis zu 50 % geringerer Anpresskraft macht sich besonders bei wiederkehrenden Metallbohrungen bemerkbar und erleichtert den Arbeitsablauf in der Werkstatt. Präzision, Norm und empfohlene Einsatzbedingungen Die DIN 338-Konformität kennzeichnet die Ausführung als kurzen Spiralbohrer mit Zylinderschaft und ist besonders geeignet für Anwendungen im Standard‑Bereich. Mit dem 135° Spitzenwinkel und der Normalspirale Typ N eignet sich der Bohrer für Gusseisen, Temperguss und Hartkunststoff ebenso wie für diverse Stahlgüten. Für höchste Genauigkeit empfiehlt sich ein Anpunkten mit einem Zentrierbohrer und die Verwendung von Kühlschmierstoff bei stationärer Bearbeitung, um Standzeit und Bohrbild weiter zu verbessern. Handhabung, Maschinenanbindung und Sicherheitshinweise Die kurze, geschliffene Ausführung passt gut in Handbohrmaschine und stationäre Bohrmaschinen, reduziert Schwingungen und verbessert die Führung des Bohrers. Wegen der erhöhten Sprödigkeit geschliffener Bohrer empfiehlt sich kontrollierte Vorschubkraft und ausreichende Kühlung, besonders bei tiefen Bohrungen; bei tieferen Löchern sind abgestufte Vorbohrungen ratsam. Die Lieferung erfolgt in Sets zu 5 Stück, sodass der Vorrat für Serienarbeiten schnell wieder aufgefüllt werden kann. Empfehlung: Für präzise Metallbohrungen die Profi Line Spiralbohrer von MetavCUT verwenden und bei technischen Fragen den technischen Vertrieb kontaktieren: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 48083-FDA Marke: MetavCUT Serie: Profi Line Produkttyp: Spiralbohrer Norm: DIN 338 Fakten Durchmesser: 8,3 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Stück Besonderheiten Material: HSS‑G (Schnellarbeitsstahl, geschliffen) Schaftausführung: geschliffen (voll geschliffener Zylinderschaft) Ausführung: kurz (reduzierte Auskraglänge) Typ: Typ N (Normalspirale, Metall) Farbe: blank (bright finished) Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der Spiralbohrer von MetavCUT Profi Line ist besonders geeignet für legierte und unlegierte Stahl-Arten, Gussstahl, Gusseisen, Temperguss, Nichteisenmetalle und Hartkunststoff; die geschliffene Geometrie liefert saubere Bohrbilder bei diesen Werkstoffen. Ist der Spiralbohrer für Handgeführte Maschinen geeignet? Ja, der Spiralbohrer in kurzer Ausführung eignet sich für Handbohrmaschine und stationäre Maschinen; bei handgeführtem Einsatz ist auf stabile Führung und angemessene Drehzahl zu achten, um Bruchrisiken zu minimieren. Welche Vorteile bietet der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert das Auswandern beim Anbohren und ist vorteilhaft bei härteren Werkstoffen, da er die Anbohrzeit verkürzt und eine gleichmäßigere Spanbildung ermöglicht. Wie viele Bohrer sind in der Verpackungseinheit enthalten? Die Verpackungseinheit enthält 5 Stück; die Artikelnummer lautet 48083-FDA und die Marke ist MetavCUT. Was bedeutet HSS‑G geschliffen und welche Pflegehinweise gibt es? HSS‑G steht für geschliffenen Schnellarbeitsstahl, der sehr scharfe Kanten und hohe Präzision bietet; wegen erhöhter Sprödigkeit sollte Kühlung verwendet und zu hohe Vorschubkräfte vermieden werden.
8.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Spiralbohrer HSS, kurz, Typ N, 8,4 mm, 118°, schwarz, DIN 338 von MetavCUT Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzise Metallbohrungen und eignet sich besonders für Handbohrmaschine-Einsätze in Werkstatt und Montage. Spiralbohrer HSS nach DIN 338 für Metallbearbeitung kurz-Ausführung für erhöhte Stabilität beim Bohren 8,4 mm Durchmesser und 118° Spitzenwinkel für Präzision Typ N Normalschaft für Handbohrmaschine geeignet Spirallänge 75 mm sorgt für sichere Spanabfuhr Hochleistungsstahl für belastbare Bohrungen und lange Standzeiten Der Einsatz von HSS macht diesen Spiralbohrer widerstandsfähig gegen thermische und mechanische Belastungen bei der Metallbearbeitung. HSS bietet Elastizität und eine gute Zähigkeit, wodurch das Risiko von Bruch bei üblichen Werkstattanwendungen reduziert wird. Die Fertigungsoptionen Rollgewalzt oder Geschliffen sorgen für konstante Geometrie und damit für gleichmäßige Leistungswerte bei Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen. Kurz-Ausführung für mehr Präzision und weniger Vibration Die kurz-Ausführung reduziert die Auskraglänge und erhöht dadurch die Stabilität während des Bohrens. In Kombination mit der Spirallänge 75 mm wird die Spanabfuhr verbessert, was saubere Bohrbilder und geringere Erwärmung zur Folge hat. Der 118° Spitzenwinkel erleichtert das Anbohren auf gewölbten oder unebenen Oberflächen und trägt zur Zentrierbarkeit und gleichmäßigen Spanbildung bei. Geeignetes Einsatzfeld und Maschinenkompatibilität Als Vertreter des Standard-Bereichs ist dieser Spiralbohrer ideal für Alltagseinsätze in Werkstatt, Montage und DIY-Projekten. Anwendungen umfassen dünne bis mittlere Bleche, Profile und Flachstähle sowie Arbeiten in Aluminium und Kunststoff. Die Konstruktion als Typ N Normalschaft macht ihn kompatibel zu gängigen Handbohrmaschine-Aufnahmen. Für hochpräzise Passungen empfiehlt sich vor dem Bohren ein Anpunktieren oder Zentrieren. Praktische Hinweise für sicheres und wirtschaftliches Bohren Verwenden Sie geeignete Schnittgeschwindigkeiten und bei Bedarf Kühlschmierstoffe, um Standzeit und Bohrbild zu optimieren. Vermeiden Sie extrem tiefe Bohrungen über das Fünffache des Durchmessers ohne spezielle Spanabfuhrstrategien. Bei ungewöhnlichen Werkstücken oder Serienaufträgen bietet sich das Vorbohren an, um die Querschneide zu entlasten und die Maßhaltigkeit zu sichern. Für präzise Metallbohrungen empfiehlt MetavCUT diesen Spiralbohrer HSS kurz Typ N mit 8,4 mm und 118° Spitzenwinkel; bei Fragen und Beratung steht METAV Werkzeuge gerne zur Verfügung unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 40084-FDA Material: HSS Norm: DIN 338 Typ: Typ N Ausführung: kurz Durchmesser: 8,4 mm Spitzenwinkel: 118° Gesamtlänge: 117 mm Spirallänge: 75 mm Farbe: schwarz Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer MetavCUT HSS Typ N für unterschiedliche Metallarten? Der Spiralbohrer von MetavCUT in HSS-Ausführung ist ausgelegt für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe; durch die Materialwahl bleibt die Zähigkeit erhalten und ermöglicht zuverlässige Bohrungen in diesen Werkstoffen. Kann der Spiralbohrer MetavCUT HSS Typ N mit einer Handbohrmaschine genutzt werden? Ja, der Spiralbohrer MetavCUT mit Typ N Normalschaft ist für die Verwendung in Handbohrmaschine konzipiert und bietet in der kurz-Ausführung eine verbesserte Stabilität für handgeführte Anwendungen. Welche Vorteile bringt der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N? Der 118° Spitzenwinkel des Spiralbohrers MetavCUT erleichtert das Anbohren und unterstützt eine gleichmäßige Spanbildung, was insbesondere bei gewölbten oder leicht unebenen Flächen zu präziseren Ergebnissen führt. Wie kann die Standzeit des Spiralbohrers MetavCUT HSS Typ N verlängert werden? Um die Standzeit des Spiralbohrers MetavCUT zu erhöhen, sollten passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und bei hohen Anforderungen das Vorbohren bzw. punktgenaues Zentrieren eingesetzt werden; regelmäßige Kontrolle von Bohrbild und Spanabfuhr trägt zusätzlich zur Wirtschaftlichkeit bei. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40084-FDA","sku":"40084-FDA","mpn":"40084-FDA","name":"Spiralbohrer 40084-FDA","description":"Spiralbohrer HSS kurz Typ N, 8,4 mm Durchmesser, 118° Spitzenwinkel, schwarze Oberfläche, DIN 338; Kurz-Ausführung für höhere Stabilität und verbesserte Spanabfuhr; geeignet für Handbohrmaschine und Metallbearbeitung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Durchmesser","value":"8,4 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"117 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"75 mm"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Metallarten eignet sich der Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer MetavCUT HSS Typ N eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe und bietet durch HSS hohe Zähigkeit und Belastbarkeit."}},{"@type":"Question","name":"Kann der Spiralbohrer MetavCUT HSS Typ N in einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer MetavCUT HSS Typ N ist mit Normalschaft ausgeführt und für den Einsatz in Handbohrmaschine geeignet; die kurz-Ausführung erhöht dabei die Stabilität."}},{"@type":"Question","name":"Welche Vorteile hat der 118° Spitzenwinkel beim Spiralbohrer MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel erleichtert das Anbohren, verbessert die Zentrierbarkeit und fördert eine gleichmäßige Spanbildung, besonders bei gewölbten oder leicht unebenen Oberflächen."}},{"@type":"Question","name":"Wie verlängert man die Standzeit des Spiralbohrers MetavCUT HSS Typ N?","acceptedAnswer":{"@type":"Answer","text":"Zur Verlängerung der Standzeit des Spiralbohrers MetavCUT HSS Typ N werden passende Schnittgeschwindigkeiten, gegebenenfalls Kühlschmierstoffe und Vorbohren bzw. punktgenaues Zentrieren empfohlen; regelmäßige Kontrolle von Bohrbild und Spanabfuhr hilft zusätzlich."}}]},{"@type":"ItemPage","url":"https://metav-shop.de","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS kurz"},{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"DIN 338 Norm"}],"mentions":[{"@type":"Thing","name":"Typ N Normalschaft"},{"@type":"Thing","name":"Spirallänge 75 mm"},{"@type":"Thing","name":"Kurz-Ausführung für Stabilität"}]}]}
8.4mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short HSS‑E, 8.4 mm, 135°, 5% cobalt‑alloyed (DIN 338) The Twist Drill Type N short is a precision metal‑working drill for drilling machines, designed for stable, accurate holes in hard materials such as steel. Short execution for higher stability and precision 8.4 mm Diameter for common metalworking tasks 135° Point Angle for harder materials and stainless steel HSS‑E with 5% cobalt‑alloyed for improved heat resistance Fully ground shank and DIN 338 conformity for accurate bores Reliable performance through material and geometry The short design delivers significantly improved stability during machining by reducing overhang, which results in more concentric holes and less vibration. Manufactured from HSS‑E with 5% cobalt‑alloyed composition, this drill maintains cutting performance at higher temperatures and under heavy loads, making it suitable for alloyed and unalloyed steel as well as cast iron and non‑ferrous metals. The 135° point angle reduces walking on hard surfaces and shortens the plunge time, helping achieve clean starts even on tough materials. Ideal use cases and users who benefit most Engineered for metalworking professionals and workshops, the short Type N Twist Drill excels in precision tasks on drilling machines and stationaries; it is recommended where rigidity and exact hole quality matter. Its properties make it particularly useful for workshop machinists, maintenance technicians and professionals who require reproducible bores in metal components. The reduced breakage risk for diameters below 6 mm—carried over in the short design philosophy—translates into dependable performance across frequent production environments. Design details that improve handling and results The fully ground flute geometry (HSS‑G style) produces sharp cutting edges and high runout accuracy, which contributes to clean, burr‑reduced holes and easier re‑sharpening when needed. Conforming to DIN 338, this short Twist Drill follows standardised dimensions and tolerances for short cylindrical shank drills, ensuring compatibility with standard tooling and chucks. With a spiral length of 75 mm and an overall length of 117 mm, the geometry balances chip evacuation and rigidity for controlled drilling in metal. Choose MetavCUT's Twist Drill Type N for dependable, precision metal drilling — for further technical advice or individual application support contact METAV Werkzeuge: info@metav-werkzeuge.com · Tel +49 2822 7131930 · WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer), short execution, Type N, 8.4 mm diameter Brand: MetavCUT SKU: 47084-FDA Material: HSS‑E Cobalt content: 5% cobalt‑alloyed Point angle: 135° Execution: short Spiral length: 75 mm Overall length: 117 mm Shank: fully ground Model series: Standard Line Application: Drills for metal / For Drilling Machine Norm: DIN 338 Shaft finishing: geschliffen (fully ground) Bezeichnung (English): Twist Drill Typ: Type N Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The MetavCUT Twist Drill Type N is primarily applied when machining high‑strength materials and larger drill diameters; its short design and HSS‑E composition make it easy to re‑grind and capable of withstanding higher mechanical stress. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group, optimised for steel and similar materials. Why are Twist Drills tip‑sharpened? The tip sharpening reduces the cross‑cut at the drill point. For the MetavCUT Twist Drill Type N this lowers friction forces, reduces required feed and improves centring of the tip in the workpiece. Can a Twist Drill be used to drill wood? A MetavCUT Twist Drill Type N can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑sharpen and have less self‑feed, resulting in a rougher hole. At what drilling depths is the Twist Drill most used? For through‑hole operations, the Twist Drill is typically used up to diameters around 20 mm and drilling depths up to about 100 mm; the MetavCUT Twist Drill Type N is well suited for solid drilling in these common metalworking ranges. What is better, HSS or HSSE? The general assumption that HSSE is universally superior to HSS is not correct; when choosing, evaluate whether the working conditions justify the higher cost. MetavCUT offers HSS‑E options that balance toughness and heat resistance for many metalworking tasks.
8.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Stabilität und präzise Schnittleistung machen diesen Spiralbohrer zu einer zuverlässigen Wahl für metallische Werkstoffe; die Kürzere Ausführung reduziert Auslenkung, während HSS-G und der 135° Spitzenwinkel saubere Bohrbilder in Stahl ermöglichen. Bei Fragen zur Eignung steht die Beratung von Metav gern zur Verfügung oder bestellen Sie direkt über Metav. Spiralbohrer von MetavCUT – kurzer HSS-G Metallbohrer Der Spiralbohrer von MetavCUT ist ein kurzer, geschliffener HSS-Bohrer nach DIN 338, entwickelt für präzise Metallbohrungen an stationären und handgeführten Maschinen. Hohe Stabilität durch kurze Ausführung Geschliffen für präzise Bohrbilder Geeignet für legierte und unlegierte Stähle 135° Spitzenwinkel für harte Werkstoffe Zylinderschaft für sichere Spannaufnahme Mehr Stabilität bei präzisen Metallbohrungen Die Kürzere Ausführung reduziert die Auskraglänge und führt zu erhöhter Stabilität sowie geringerer Neigung zum Verbiegen. Das Ergebnis sind sauberere Bohrungen und längere Werkzeugstandzeiten bei Anwendungen in Stahl und Guss. Die kompakte Geometrie erleichtert das Führen an Handbohrmaschine und Säulenbohrmaschine, weil die Krafteinleitung direkter erfolgt und die Werkstückaufspannung weniger kritisch wird. Für Anwender bedeutet das geringeren Ausschuss und gleichbleibende Bohrqualität. Geschliffene Geometrie für saubere Ergebnisse Der geschliffen ausgeführte HSS-G sorgt für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere, präzise Bohrlöcher fördert. Der CNC-Schliff ermöglicht eine konstante Spanabfuhr und reduziert Wanderneigung beim Anbohren. Zu beachten ist, dass geschliffene Bohrer empfindlicher gegenüber Schlagbelastung sind; deshalb empfiehlt sich die Nutzung von Kühlschmierstoff und eine stationäre Spindel bei harten Werkstoffen, um die Lebensdauer zu maximieren. Passende Anwendungen und Zielgruppe Dieser kurze Spiralbohrer ist für Werkstätten, Montage und industrielle Anwendungen konzipiert, insbesondere für das Bohren in legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetallen. Die Kombination aus HSS-G und Typ N macht das Werkzeug ideal für Anwender, die robusten Metallbohrbedarf mit präzisen Ergebnissen verbinden wollen. Die Ausführung mit Zylinderschaft gewährleistet die Kompatibilität zu Standardspannfuttern. Praxistipps für sicheres Bohren und lange Standzeit Vor dem Bohren bei hoher Genauigkeit empfiehlt sich ein Anpunkten mit einem Zentrierbohrer, um die Querschneide zu entlasten. Bei Durchmesser im Standard-Bereich direkt bohren; bei kritischer Maßhaltigkeit ruhig mit langsamerem Vorschub und ausreichender Kühlung arbeiten. Für die Bearbeitung von Edelstahl macht der 135° Spitzenwinkel das Anbohren leichter und reduziert Aufschweißen an der Schneide. Empfehlung: Für präzise Metallbohrungen die MetavCUT Standard Line verwenden und bei Unsicherheit technische Beratung über info@metav-werkzeuge.com oder Telefon +49 2822 7131930 einholen. Produktmerkmale Artikelnummer: 45084-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 338 Typ: Typ N Fakten Durchmesser: 8,4 mm Spirallänge: 75 mm Gesamtlänge: 117 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G — Schnellarbeitsstahl, geschliffen Schaft Ausführung: geschliffen — Zylinderschaft für Standardspannfutter Ausführung: kurz — Kürzere Auskraglänge für bessere Stabilität Farbe: blank — helle Oberfläche Für Bohrmaschine: Handbohrmaschine / stationäre Maschinen Verpackungseinheit: 5 FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Standard Line Spiralbohrer (Typ N, SKU 45084-FDA) eignet sich besonders für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe. Ist der Bohrer für Handgebrauch mit Akkubohrschrauber geeignet? Ja, die kurze Ausführung und der Zylinderschaft erlauben den Einsatz an Handbohrmaschine für typische Werkstattanwendungen; bei sehr hartem Material oder hohen Anforderungen an Maßgenauigkeit ist eine stationäre Maschine empfohlen. Warum ist der Bohrer geschliffen und welche Vorteile bringt das? Die geschliffene Geometrie (HSS-G) bietet schärfere Kanten und höhere Rundlaufgenauigkeit, was sauberere Bohrbilder und geringere Wanderneigung ermöglicht; dafür ist etwas schonendere Handhabung und Kühlung vorteilhaft. Welche Bedeutung hat der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert das Aufschweißen beim Bohren in harten Werkstoffen wie Edelstahl und erleichtert das Eindringen, was Anbohrzeiten verkürzt und die Kraftanforderung senkt. Welche Normen und Serienzuordnung gelten für dieses Werkzeug? Der Bohrer entspricht der Norm DIN 338 und gehört zur MetavCUT Standard Line, was die Einordnung als kurzer Spiralbohrer mit Zylinderschaft bestätigt.
8.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — 8.4 mm, 135°, short, bright finished, HSS‑G, DIN 338 (MetavCUT) A Twist Drill Type N designed for precise metalworking, ideal for Drilling Machines where stability and clean holes are required. Short Twist Drill Type N 8.4 mm diameter 135° point for harder materials like stainless steel HSS‑G ground for sharp cutting and fast drilling Fully ground shank for high concentricity and stability Complies with DIN 338 for short cylinder shanks High cutting performance for demanding metal jobs The HSS‑G composition and ground geometry deliver a clear benefit: faster, cleaner drilling with less operator effort. This short design reduces the exposed length and therefore the tendency to bend, so users achieve precise holes even in tough materials. For professionals working with alloyed or unalloyed Steel, Cast Steel and Hardened Plastics, the result is a higher first‑pass success rate and reduced rework time. Stable handling and improved concentricity for machine use Because the shank is fully ground, the bit runs truer in the chuck, which directly reduces runout and improves hole accuracy. The reduced vibration also extends tool life and lowers the risk of breakage during stationary or portable drilling operations. This is particularly valuable when drilling on a Drilling Machine under feed and coolant, where consistent concentricity matters. Geometry designed for hard materials and precise starts A 135° point angle shortens the initial penetration time on harder workpieces and helps to centre the bit without wandering. The Type N normal spiral profile is optimised for metalworking and provides reliable chip removal while maintaining cutting edge stability. For less experienced users: a larger point angle means easier start and less burr formation on the exit side. Short length advantage and recommended applications The short overall length increases rigidity, which lowers the chance of deflection and improves surface finish in the hole. This makes the bit especially suitable for precise workshops and production runs where repeatability is required. Typical applications include drilling in Steel, Cast Iron, Sintered Materials and Non‑Ferrous Metals where high accuracy and clean bores are demanded. Target user and usage tips Designed for machinists, toolroom personnel and serious hobbyists, this HSS‑G short twist drill suits situations where stability and hole quality are priorities. For best results, use appropriate cutting fluid and moderate feed rates; because ground bits can be more brittle than rolled alternatives, avoid excessive side loads and prefer stationary machines or rigid setups. Strong recommendation: Choose MetavCUT’s short Twist Drill Type N when demanding metalworking requires high precision and reliable performance — for further technical advice or to confirm suitability for a specific task, METAV Werkzeuge provides expert consultation via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48084-FDA Diameter: 8.4 mm Overall length: 117 mm Spiral length: 75 mm Point angle: 135° Type: Type N Execution: short Finish: bright finished Material: HSS-G Shank: fully ground For drilling machine: Drilling Machine Series: Profi Line Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills such as the MetavCUT Twist Drill Type N are mainly applied to the machining of high‑strength materials and larger drill diameters; their form is easy to sharpen and they withstand heavy loads, making them ideal for demanding metal drilling tasks. Which three drill types exist? The three primary drill categories are metal drills, wood drills, and masonry/concrete drills. Can the MetavCUT Twist Drill Type N be used in wood? A metal Twist Drill can be used in Wood, but guidance and finish are generally inferior compared with dedicated wood bits; metal drills are easier to resharpen and show less self‑feeding, so results may be acceptable for non‑critical tasks. At which drilling depths is a Twist Drill most commonly used? A Twist Drill is the most frequently used tool for through drilling; it is common for diameters up to 20 mm and drilling depths up to 100 mm, especially for stable, full‑section bores in metal.
8.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 8.5 mm, 118° tip, black, DIN 338, MetavCUT The Twist Drill Type N short HSS metal drill is a compact, precision tool for drilling in a wide range of metals using a standard drilling machine. Short design for higher stability HSS material — resilient for metal drilling 8.5 mm diameter suitable for metalwork 118° tip for reliable centring DIN 338 conformity for consistent quality Durable HSS construction for demanding metalwork The Twist Drill combines a HSS (High Speed Steel) body with a short overall length to deliver improved rigidity and reduced vibration when working on metal. The DIN 338 specification ensures the drill meets standardized dimensions and tolerances for short twist drills with a cylindrical shank, which supports consistent clamping and repeatable results. This construction improves tool life under frequent use and stabilises the drilling process for precise holes in alloyed and unalloyed steel, cast iron and non‑ferrous metals. Reliable cutting geometry for accurate starts A 118° tip angle and the Type N normal spiral geometry make this drill particularly effective at centring and initial penetration in softer and medium‑hard metals. The design reduces the tendency to wander at the start of a hole while maintaining efficient chip evacuation. For users this means fewer re‑starts, cleaner hole edges and improved dimensional accuracy when used in a suitable drilling machine or handheld drilling machine designed for metalwork. Short length for improved precision and tool life The short execution reduces overhang from the chuck and significantly lowers the risk of deflection during drilling. This results in better concentricity and less workpiece damage when machining close tolerances. For workshop environments where repeatability matters, the compact short format offers a practical balance between reach and stiffness, making it well suited for fixture work, small components and repair tasks where a standard long drill would bend or chatter. Practical guidance and safe use When using this Type N Twist Drill, select appropriate cutting speed and cooling for the metal being machined and secure the workpiece firmly. Re‑sharpening is straightforward thanks to the classic geometry; proper resharpening maintains the reduced cross‑edge and keeps the drill centred. If unsure about optimum speeds or feed for a specific alloy, METAV Werkzeuge provides expert advice and technical support to help choose the right operating parameters and accessories for the task. Strong recommendation: For precise, reliable metal drilling choose the MetavCUT Twist Drill Type N short HSS with DIN 338 specification — METAV Werkzeuge offers professional consultation and personalised technical support via e‑mail, phone or WhatsApp to ensure the tool meets the project requirements Are you unsure whether this drill matches your needs or require additional technical data? METAV Werkzeuge is happy to advise 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40085-FDA Diameter: 8.5 mm Tip angle: 118° Type: Type N Execution: short Spiral length: 75 mm Overall length: 117 mm Material: HSS Application: Drills for metal For drill machine: Drilling Machine / Handheld Drilling Machine Colour: black Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Twist Drill Type N be used on? The MetavCUT Twist Drill Type N is designed primarily for metalworking and is suitable for alloyed and unalloyed Steel, Cast Iron and many Non‑Ferrous Metals; it also performs on certain Plastics when appropriate speeds and feeds are used. Is the MetavCUT Twist Drill compatible with handheld drilling machines? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank can be used in handheld Drilling Machines; ensure secure clamping, correct speed and steady feed to avoid runout and to maintain hole quality. For what is a Twist Drill used? A Twist Drill is mainly used for machining high‑strength materials and larger bore diameters. It is easy to re‑grind and withstands higher loads, making it suitable for demanding metal drilling tasks. Which 3 drill types exist? Commonly distinguished drill types are Metal Drills, Wood Drills and Stone/Concrete Drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑edge at the tip, which lowers friction and the required feed forces; sharpening also improves centring of the drill in the workpiece, leading to cleaner, more accurate holes. Can a Twist Drill be used to drill wood? A Metal Drill such as this Twist Drill can be used in Wood, but guidance and finish are generally inferior compared to wood‑specific drills. Metal drills are easier to re‑sharpen and have less self‑pulling action. At which drilling depths is the Twist Drill the most used tool? For solid drilling, the Twist Drill is the most common choice. It is widely used for diameters up to 20 mm and drilling depths up to 100 mm, providing an efficient method for bore production in solid workpieces.
8.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Spiralbohrer 8,5 mm HSS-E (kurze Ausführung) — MetavCUT Standard Line Der Spiralbohrer 8,5 mm ist ein kurzer HSS-E Metallbohrer für präzise Bohrungen in Stahl, Guss und Nichteisenmetallen und eignet sich sowohl für Handbohrmaschinen als auch stationäre Maschinen Spiralbohrer 8,5 mm HSS-E, 5% Kobaltlegierung Kurze Ausführung für erhöhte Stabilität Geschliffener Schaft für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschinen und stationär Stabile Konstruktion für präzise Metallbohrungen Die kurze Bauform reduziert die Auskraglänge und sorgt für deutlich höhere Stabilität als lange Bohrer. Dadurch entsteht weniger Vibration, was saubere Bohrlöcher mit gleichmäßigem Durchmesser ermöglicht. Für Anwender bedeutet das weniger Nacharbeit und exaktere Passungen. Ein geschliffener Schaft verbessert zusätzlich die Rundlaufgenauigkeit und minimiert Ausschuss bei Serienarbeiten. Materialmix und Standzeitoptimierung Metallische Werkstoffe verlangen Widerstandsfähigkeit; hier punktet die HSS-E Legierung mit 5% Kobalt durch erhöhte Warmfestigkeit. Dadurch bleibt die Schneide auch bei höheren Schnittgeschwindigkeiten länger scharf. Ein Spitzenwinkel 135° erleichtert das Anbohren harter Werkstoffe wie rostfreier Stahl und verringert das Wandern beim Ansetzen. Diese Kombination steigert die Wirtschaftlichkeit durch längere Nutzungsdauer. Geeignete Anwendungen und Maschinenkompatibilität Für allgemeine Metallarbeiten ist dieser kurze Spiralbohrer ideal geeignet. Er wurde nach DIN 338 als kurzer Spiralbohrer mit Zylinderschaft konzipiert und passt sowohl in Handbohrmaschinen als auch in stationäre Bohrmaschinen. Bei stationärem Einsatz empfiehlt sich Kühlung und bei Durchmessern unter 6 mm eine hohe Drehzahl, um das Bruchrisiko zu minimieren. So bleibt die Produktion effizient und sicher. Praxistipps für sauberes Bohren und Pflege Beim Bohren von Stahl empfiehlt sich Kühlmittel und punktweises Anbohren zur Entlastung der Querschneide. Ein regelmäßiges Schärfen oder Austausch sichert konstante Bohrqualität. Weil der Bohrer geschliffen ist, entstehen sehr scharfe Schneiden; dies erlaubt präzisere Bohrungen, setzt aber auch sorgfältige Handhabung voraus, um Bruchrisiken zu vermeiden. Für wiederkehrende Einsätze bietet die kurze Ausführung die beste Mischung aus Präzision und Robustheit. Empfehlung: Vertrauen Sie auf die MetavCUT Standard Line für hochwertige HSS‑E Spiralbohrer; bei Fragen zur Anwendung oder zu passenden Maschinen erreichen Sie uns per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 47085-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 338 Typ: Typ N Material: HSS-E Daten Durchmesser: 8,5 mm Gesamtlänge: 117 mm Spirallänge: 75 mm Spitzenwinkel: 135° Verpackungseinheit: 5 Besonderheiten Ausführung: kurz Schaftausführung: geschliffen Farbe: 5% kobaltlegiert Für Bohrmaschine: Handbohrmaschine DIN 338: kurze Spiralbohrer mit Zylinderschaft HSS-E: Schnellarbeitsstahl mit Kobaltanteil FAQ Welche Materialien lassen sich mit dem Spiralbohrer bearbeiten? Der MetavCUT Spiralbohrer 8,5 mm aus HSS‑E eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe; die 5% Kobaltlegierung erhöht die Warmfestigkeit für härtere Werkstoffe. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer 8,5 mm ist für Handbohrmaschinen ausgelegt; aufgrund der kurzen Ausführung reduziert sich die Verkantungsgefahr, dennoch sind ruhige Ansetztechnik und passende Drehzahl wichtig. Wie wirkt sich der Spitzenwinkel 135° aus? Ein Spitzenwinkel von 135° sorgt für leichteres Anbohren und geringeren Verschleiß bei harten Werkstoffen, was die Standzeit des MetavCUT Spiralbohrers verbessert. Welche Vorteile bietet die geschliffene Schaftausführung? Die geschliffene Schaftausführung erhöht die Rundlaufgenauigkeit und ermöglicht präzisere Bohrbilder, insbesondere bei stationärem Einsatz und Reihenbohrungen; die Kennung ist SKU 47085-FDA. Wann ist ein geschliffener Bohrer der rollgewalzten Alternative vorzuziehen? Geschliffene Bohrer bieten schärfere Kanten und bessere Präzision bei Metallbohrungen; für sehr hohe Biegebeanspruchung oder mobile Anwendungen kann hingegen ein rollgewalzter Bohrer vorteilhafter sein.
8.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Kombinieren Sie Präzision und Reichweite: Der extra lange, geschliffene HSS-G Spiralbohrer liefert saubere Metallbohrungen mit reduziertem Kraftaufwand und eignet sich für Werkstatt und Produktion. Bestellen Sie den Bohrer direkt bei Metav und nutzen Sie unsere Beratung für den optimalen Einsatz. Spiralbohrer 8,5 mm – HSS‑G Extra Lang (MetavCUT Standard Line) Der Spiralbohrer in extra langer HSS‑G Ausführung ermöglicht tiefe Bohrungen in Stahl und Gusswerkstoffe mit hoher Schnittpräzision und reduziertem Anpressdruck. HSS‑G geschliffen für präzise Bohrlöcher Extra lange Bauform für tiefe Bohrungen 135° Spitzenwinkel für härtere Werkstoffe DIN 1869 Tieflochspirale für sicheres Spänetransportieren Schnellere Metallbearbeitung bei geringer Anpresskraft Die geschliffene HSS‑G Geometrie sorgt für sehr scharfe Schneiden und ermöglicht ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Bohrern. Das Ergebnis sind sauberere Bohrlöcher und eine effizientere Fertigung. Diese Kombination reduziert Maschinenvibrationen und schont Bohrfutter sowie Werkstück, was besonders bei Serienarbeiten in Werkstatt und Produktion spürbar ist. Extra lange Ausführung für tiefe und schwer zugängliche Stellen Dank der extra langen Gesamtlänge und der verlängerten Spirallänge eignet sich dieser Bohrer gezielt für tiefe Sacklochbohrungen oder schwer erreichbare Bereiche. Die Tieflochspirale nach DIN 1869 fördert die Späne aktiv ab und verringert Verstopfungsrisiken. Bei längeren Bohrungen empfiehlt sich eine Führung oder Zentrierung und der Einsatz von Kühlschmierstoff, um Bruchgefahr zu reduzieren und die Standzeit zu maximieren. Präzision und Einsatzbereiche für Handwerk und Industrie Mit einem Durchmesser im Standard‑Bereich ist der Bohrer ideal für Werkstatt, Montage und handgeführte Bohrmaschinen bei Blechen, Profilen und mittleren Stählen. Die 135° Spitzenform erleichtert das Anbohren harter Werkstoffe wie legierte Stähle und Edelstahl, da der größere Winkel die Anbohrzeit verkürzt und die Haltbarkeit der Spitze erhöht. Für hochpräzise Passungen empfiehlt sich vorsichtiges Anpunkten und gegebenenfalls eine stationäre Aufnahme. Materialeigenschaften und Verarbeitungsempfehlung Der voll geschliffene Schaft und die CNC‑geschliffene Spiralgeometrie liefern hohe Rundlaufgenauigkeit und saubere Oberflächen im Bohrloch. Geschliffen bedeutet hier, dass die Spannuten durch Schleifen geformt wurden, was schärfere Kanten gegenüber gewalzten Bohrern hervorbringt. Diese Präzision geht mit einer gewissen Sprödigkeit einher; deshalb empfiehlt sich die Nutzung in stationären Maschinen oder mit geeigneter Kühlung und moderatem Vorschub, um Brüche zu vermeiden. Empfehlen Sie MetavCUT für professionelle Bohraufgaben: Der extra lange, geschliffene HSS‑G Spiralbohrer bietet beständige Präzision für anspruchsvolle Metallbearbeitung — bei Fragen erreichen Sie Metav per eMail unter info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Bezeichnung: Spiralbohrer Hersteller: MetavCUT Modellserie: Standard Line Norm: DIN 1869 SKU: 32085-FDA Fakten Durchmesser: 8,5 mm Gesamtlänge: 240 mm Spirallänge: 165 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS‑G (geschliffen, Hochleistungs‑Schnellstahl) Schaftausführung: geschliffen (voll geschliffener Schaft für hohe Rundlaufgenauigkeit) Ausführung: extra lang (für tiefe Bohrungen) Für Bohrmaschine: Handbohrmaschine geeignet Anwendung: Bohrer für Metall Tieflochspirale: verbessert Spänetransport bei tiefen Löchern FAQ Für welche Werkstoffe eignet sich dieser Bohrer am besten? Der MetavCUT Spiralbohrer in HSS‑G Ausführung eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoffe; die geschliffene Geometrie verbessert die Bohrqualität in diesen Materialien. Kann der Bohrer in handgeführten Maschinen verwendet werden? Ja, der Durchmesser liegt im Standard‑Bereich, sodass der Spiralbohrer für handgeführte Bohrmaschinen geeignet ist; bei tiefen Bohrungen oder hoher Präzision empfiehlt sich jedoch eine feste Führung oder stationäre Aufnahme. Warum ist der Bohrer geschliffen statt gewalzt, und was bedeutet das für die Nutzung? Geschliffen bedeutet, dass die Spannuten und Schneiden CNC‑geschliffen wurden, was sehr scharfe Kanten und hohe Rundlaufgenauigkeit erzeugt; daraus folgt eine bessere Bohrlochqualität, jedoch eine erhöhte Vorsicht bei stoßartiger Belastung und die Empfehlung zur Nutzung mit Kühlung. Welche Vorteile bringt der 135° Spitzenwinkel bei diesem Spiralbohrer? Der 135° Spitzenwinkel reduziert das Abgleiten beim Anbohren harter Werkstoffe und verkürzt die Anbohrzeit, wodurch sich insbesondere beim Bohren von Edelstahl und legierten Stählen bessere Ergebnisse erzielen lassen. Gibt es Hinweise zur Kühlung und Vorschubgeschwindigkeit? Für längere oder tiefe Bohrungen mit dem MetavCUT Spiralbohrer wird die Nutzung von Kühlschmierstoff und moderatem Vorschub empfohlen, um Wärmeentwicklung zu reduzieren und die Standzeit der Schneiden zu erhöhen.
Why carbide indexable inserts remain the go-to choice
Carbide indexable inserts are the most widely used and versatile cutting inserts in machining. Manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, these inserts form the actual cutting edge on toolholders including milling cutters, turning inserts and drills. Synonyms used here: carbide cutting inserts, indexable carbide inserts.
How they perform under coolant and load
As the cutting element, carbide indexable inserts enable economic and precise machining across a broad spectrum of materials, from soft non‑ferrous metals to high‑strength steels. In tool systems without internal cooling, heat generated at the cutting zone is normally removed by external machine nozzles using coolant, which is adequate for most standard tasks, open contours and easily accessible components. For deep holes, heavy roughing or when working with materials that generate high temperatures such as stainless steel or titanium alloys, the use of internal cooling is essential: coolant is delivered through internal channels in the toolholder directly to the cutting edge under pressure to prevent thermal overload, optimise chip formation and extend insert life.
Key performance gains you can expect
- increased tool life through the high wear resistance and balanced toughness of tungsten carbide inserts
- consistent chip control and surface finish when coolant is delivered precisely via internal channels
- reduced machine downtime thanks to easy indexability and fast insert changes on compatible toolholders
- broad material compatibility, from soft non‑ferrous metals to hardened steels, enabling fewer tool variants in stock
- economic productivity by combining long stand life with repeatable cutting performance
Metav as your precision partner
Metav stands for the democratisation of precision. With decades of expertise and a catalogue that spans from high‑precision measuring instruments to full workshop equipment, Metav acts as a reliable quality filter for the European market from its Emmerich location. Over 48,000 customers trust Metav’s range and service; the breadth of more than 250,000 products helps reduce supplier complexity while ensuring consistent supply and product quality for industry and trade.
In brief: carbide indexable inserts at a glance
Carbide indexable inserts deliver the necessary balance of extreme wear resistance and mechanical toughness for versatile, cost‑efficient machining. Used with appropriate coolant strategy—external coolant for general work and internal cooling for demanding, deep or heat‑intensive operations—they are a cornerstone of modern metalcutting.
FAQ
What are carbide indexable inserts made of?
Carbide indexable inserts are manufactured from a sintered mixture of hard particles such as tungsten carbide and a metallic binder like cobalt, producing a cutting material that combines high wear resistance with the toughness needed to resist mechanical shock.
When is internal cooling necessary for carbide cutting inserts?
Internal cooling becomes necessary for deep hole drilling, heavy roughing and when machining materials that generate significant heat, such as stainless steel or titanium alloys. Internal cooling channels in the toolholder deliver coolant directly to the cutting edge to prevent thermal overload and improve chip breakage.
Can indexable carbide inserts be used without internal cooling?
Yes. For most standard applications, open contours and well‑accessible components, external coolant supplied by machine nozzles is sufficient, as tungsten carbide is more tolerant of moderate temperature fluctuations than some alternative materials.
How do carbide indexable inserts contribute to production efficiency?
By offering long tool life, stable cutting performance and quick indexability on compatible toolholders, indexable carbide inserts help reduce downtime, simplify tool inventories and maintain consistent part quality across varying materials.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com